Doc No
IS 7779 : Part 1 :
Sec 1
IS 7779 : Part 1 :
Sec 2
IS 7779 : Part 1 :
Sec 3
IS 7779 : Part 2 :
Sec 1
IS 7779 : Part 2 :
Sec 2
IS 269
IS 383
IS 455
IS 456
SP 7
SP 18
SP 6 : Part 7
SP 58
IS 4627
IS 9011
IS 2466
IS 516
IS 650
IS 457
IS 1199
IS 1344
IS 1489 : Part 1
IS 1489 : Part 2
IS 1727
IS 9047 : Part 1
Title
Schedule for properties and availability of stones for
construction purpoes: Part I Gujarat state Section 1
Availability of stones
Schedule for properties and availability of stones for
construction purposes: Part I Gujarat state: Section 2
Engineering properties of building stones
Schedule for properties and availability of stones for
construction purposes: Part I Gujarat state: Section 3
Engineering properties of stone aggregates
Schedule for properties and availability of stones for
construction purposes: Part II Maharashtra state
Section 1 Availability of stones
Schedule for properties and availability of stones for
construction purposes: Part II Maharashtra state
Section 2 Engineering properties of building stones
Specification for 33 grade ordinary portland cement
Specification for coarse and fine aggregates from
natural sources for concrete
Specification for Portland slag cement
Code of practice for plain and reinforced concrete
National buiding code of India 1983
ISI Handbook of Food Analysis - Parts XII, XIII,
XIV XV
ISI Handbook for Structural Engineers - Part 7 :
Simple Welded Girders
Handbook on Pumps for Drinking Water Supply
Dehydrated cabbage
Skip suspension gear for winding in mines
Beam compasses
Method of test for strength of concrete
Specification for standard sand for testing of cement
Code of practice for general construction of plain
and reinforced concrete for dams and other massive
structures
Methods of sampling and analysis of concrete
Specification for calcined clay pozzolana
Specification for Portland pozzolana cement Part 1
Flyash based
Specification for Portland-pozzolana cement Part 2
calcined clay based
Methods of test for pozzolanic materials
Data sheet for aerial ropeways and cableways:Part 1
Data to be supplied by intending purchaser for aerial
system for transportation of goods
IS 2386 : Part 2
IS 2386 : Part 3
IS 2386 : Part 4
IS 2386 : Part 6
IS 9047 : Part 2
IS 6216
IS 4164
IS 2505
IS 9210
IS 13257
IS 2770 : Part 1
IS 3370 : Part 1
IS 3370 : Part 2
IS 3370 : Part 3
IS 7078
IS 9301
IS 3370 : Part 4
IS 3466
IS 3535
IS 3558
IS 3812
IS 4031 : Part 1
IS 4031 : Part 2
Methods of test for aggreegates for concrete Part 2
Estimation of deleterious materials and organic
impurities
Methods of test for aggregates for concrete Part 3
Specific gravity, density, voids, absorption and
bulking
Methods of test for aggregates for concrete Part 4
Mechanical properties
Methods of test for aggregates for concrete : Part 6
Measuring mortar making properties of fine
aggregates
Data sheet for aerial ropeways and cableways:Part 2
Data to be supplied by intending purchaser for aerial
system for transportation of passengers, surface
Short link chain, Grade T (8) calibrated for pulley
block and other lifting appliances
Lifting 'C' hooks with eye capacity upto 25 tonnes
General requirements for concrete vibrators
Display cabinets
Ring type joint gasket and grooves for pipe flanges Specification
Methods of testing bond in reinforced concrete Part
1 Pull-out test
Code of practice for concrete structures for the
storage of liquids: Part 1 General requirements
Code of practice for concrete structures for the
storage of liquids: Part 2 Reinforced concrete
structures
Code of practice for concrete structures for the
storage of liquids: Part 3 Prestressed concrete
structures
Plastics used in instrument industry
Deepwell hand pumps
Code of practice for concrete structures for the
storage of liquids: Part 4 Design tables
Specification for masonry cement
Methods of sampling hydraulic cement
Code of practice for use of immersion vibrators for
consolidating concrete
Specification for fly ash for use as pozzolana and
admixture
Methods of physical tests for hydraulic cement: Part
1 Determination of fineness by dry sieving
Methods of physical tests for hydraulic cement: Part
2 Determination of fineness by specific surface by
Blaine air permeability method
IS 4031 : Part 3
IS 4031 : Part 4
IS 4032
IS 4634
IS 4031 : Part 5
IS 4031 : Part 6
IS 4031 : Part 7
IS 4031 : Part 8
IS 4031 : Part 9
IS 4031 : Part 10
IS 4031 : Part 11
IS 4031 : Part 12
IS 4031 : Part 14
IS 4031 : Part 15
IS 4845
IS 5512
IS 5513
IS 5515
IS 3972
IS 579
IS 5516
IS 5536
IS 4199
IS 5816
Methods of physical tests for hydraulic cement: Part
3 Determination of soundness
Methods of physical tests for hydraulic cement: Part
4 Determination of consistency of standard cement
paste
Method of chemical analysis of hydraulic cement
Methods for testing performance of batch-type
concrete mixers
Methods of physical tests for hydraulic cement: Part
5 Determination of initial and final setting times
Methods of physical tests for hydraulic cement: Part
6 Determination of compressive strength of
hydraulic cement (other than masonry cement)
Methods of physical tests for hydraulic cement: Part
7 Determination of compressive strength of masonry
cement
Methods of physical tests for hydraulic cement: Part
8 Determination of transverse and compressive
strength of plastic mortar using prism
Methods of physical tests for hydraulic cement: Part
9 Determination of heat of hydration
Methods of physical tests for hydraulic cement: Part
10 Determination of drying shrinkage
Methods of physical tests for hydraulic cement: Part
11 Determination of density
Methods of physical tests for hydraulic cement: Part
12 Determination of air content of hydraulic cement
mortar
Methods of physical test for hydraulic cement Part
14 Determination of false set
Methods of physical test for hydraulic cement Part
15 Determination of fineness by wet sieving
Definitions and terminology relating to hydraulic
cement
Specification for flow table for use in tests of
hydraulic cements and pozzolanic materials
Specification for vicat apparatus
Specification for compaction factor apparatus
Methods of test for vitreous enamelware
Vegetable tanned sole leather - Specification
Specification for variable flow type air-permeability
apparatus (Blaine type)
Specification for constant flow type air-permeability
apparatus (Lea and Nurse type)
Liquid toilet soap
Method of test for splitting tensile strength of
IS 6452
IS 6461 : Part 1
IS 6461 : Part 4
IS 6461 : Part 5
IS 6461 : Part 6
IS 9047 : Part 3
IS 8745
IS 6461 : Part 8
IS 6461 : Part 9
IS 6461 : Part 11
IS 6461 : Part 12
IS 6909
IS 6923
IS 7320
IS 12592 : Part 1
IS 7246
IS 7325
IS 7861 : Part 1
IS 7861 : Part 2
IS 8041
IS 8042
IS 8043
IS 8112
IS 8142
concrete cylinders
Specification for high alumina cement for structural
use
Glossary of terms relating to cement concrete: Part I
Concrete aggregates
Glossary of terms relating to cement concrete: Part
IV Types of concrete
Glossary of terms relating to cement concrete: Part
V Formwork for concrete
Glossary of terms relating to cement concrete: Part
VI Equipment, tools and plant
Data sheet for aerial ropeways and cableways:Part 3
Data to be supplied by intending purchaser for
transportation of passenger, underground
Methods of presentation of data of physical and
mechanical properties of timber
Glossary of terms relating to cement concrete: Part
VIII Properties of concrete
Glossary of terms relating of cement concrete: Part 9
Structural aspects
Glossary of terms relating to cement concrete: Part
11 Prestressed concrete
Glossary of terms relating to cement concrete: Part
12 Miscellaneous
Specification for supersulphated cement
Methods of test for performance of screed board
concrete vibrators
Specification for concrete slump test apparatus
Specification for precast concrete manhole covers
and frames: Part 1 Covers
Recommendations for use of table vibrators for
consolidating concrete
Specification for apparatus for determining
constituents of fresh concrete
Code of practice for extreme weather concreting Part
1 Recommended practice for hot weather concreting
Code of pracdtice for extreme weather concreting:
Part II Recommended practice for cold weather
concreting
Specification for rapid hardening Portland cement
Specification for white Portland cement
Specification for hydrophobic Portland cement
Specification for 43 grade ordinary Portland cement
Method of test for determining setting time of
concrete by penetration resistance
IS 9012
IS 9013
IS 9284
IS 9376
IS 9377
IS 12968
IS 13892
IS 9399
IS 10070
IS 10078
IS 3395
IS 9459
IS 9799
IS 10079
IS 10080
IS 10086
IS 10262
IS 10510
IS 10850
IS 10890
IS 11262
IS 11263
IS 11389
IS 11993
IS 12089
Recommended practice for shotcreting
Method of making, curing and determining
compressive strength of accelerated cured concrete
test specimens
Method of test for abrasion resistance of concrete
Specification for apparatus for measuring aggregate
crushing value and ten percent fines value
Specification for apparatus for aggregate impact
value
Steel castings for crankshafts for marine engines
Correspondence envelopes
Specification for apparatus for flexural testing of
concrete
Specification for machine for abrasion testing of
coarse aggregates
Specification for jolting apparatus for testing cement
Low density polyethylene (LDPE) and linear low
density polyethylene (LLDPE) materials for
moulding and extrusion
Specification for apparatus for use in measurement
of length change of hardened cement paste, mortar
and concrete
Specification for pressure meter for determination of
air content of mixed concrete
Specification for cylindrical metal measures for use
in tests of aggregates and concrete
Specification for vibration machine for casting
standard cement mortar cubes
Specification for moulds for use in tests of cement
and concrete
Recommended guidelines for concrete mix design
Specification for vee-bee consistometer
Specification for apparatus for measurement of
water retentivity of masonry cement
Specification for planetary mixer used in tests of
cement and pozzolana
Specification for calorimeter for determination of
heat of hydration of hydraulic cement
Specification for cylinder measures for
determination of air content of hydraulic cement
mortar
Methods of test for performance of concrete
vibrators; Immersion type
Code of practice for use of screed board concrete
vibrators
Specification for granulated slag for manufacture of
IS 12119
IS 12269
IS 12330
IS 12423
IS 12468
IS 12600
IS 12803
IS 12813
IS 13311 : Part 1
IS 13311 : Part 2
IS 14345
IS 651
IS 771 : Part 1
IS 771 : Part 2
IS 771 : Part 3 :
Sec 1
IS 771 : Part 3 :
Sec 2
IS 771 : Part 4
IS 771 : Part 7
IS 779
IS 747
IS 782
IS 1700
IS 772
IS 773
Portland slag cement
General requirements for pan mixers for concrete
Specification for 53 grade ordinary Portland cement
Specificatioon for sulphate resisting Portland cement
Method for colorimetric analysis of hydraulic
cement
General requirements for vibrators for mass
concreting; Immersion type
Specification for low heat Portland cement
Methods of analysis of hydraulic cement by X-ray
fluorescence spectrometer
Method of analysis of hydraulic cement by atomic
spectrophotometer
Methods of non-destructive testing of concret: Part 1
Ultrasonic velocity
Methods of non-destructive testing of concrete: Part
2 Rebound hammer
Specification for autoclave apparatus
Specification for salt glazed stoneware pipe and
fittings
Specification for glazed fire-clay sanitary
appliances: Part 1 General requirements
Specification for glazed fire-clay sanitary
appliances: Part 2 Specific require ments of kitchen
and laboratory sinks
Specification for glazed fire clay sanitary appliances
: Part 3 Specific requirements of urinals, Section 1
Slab urinals
Specification for glazed fire-clay sanitary
appliances: Part 3 Specific requirements of urinals:
Section 2 Stall urinals
Specification for glazed fire-clay sanitary
appliances: Part 4 Specific requirements of
postmortom slabs
Specification for glazed fire-clay sanitary
appliances: Part 7 Specific requirements of slop
sinks
Specification for water meters (domestic type)
Handloom cotton bunting cloth, dyed
Specification for caulking lead
Specification for drinking fountains
Specification for general requirements for enamelled
cast iron sanitary appliances
Specification for enamelled cast iron water-closets
railway coaching stock type
IS 774
IS 775
IS 5951
IS 780
IS 781
IS 1701
IS 1703
IS 1711
IS 1726
IS 2088
IS/ISO 5170
IS 2104
IS 2401
IS 2548 : Part 1
IS 3340
IS 2692
IS 3004
IS 2548 : Part 2
IS 2556 : Part 1
IS 2556 : Part 2
SP 32
IS 2556 : Part 4
IS 2556 : Part 5
IS 9205 : Part 1
Specification for flushing cistern for water closets
and urinals (other than plastic cistern)
Specification for cast iron brackets and supports for
wash basins and sinks
Methods for determination of colour fastness of
textile materials to weathering by outdoor exposure
Specification for sluice valves for water works
purposes (50 to 300 mm size)
Specification for cast copper alloy screw down bib
taps and stop valves for water services
Specification for mixing valves for ablutionary and
domestic purposes
Specification for copper alloy float valves
(horizontal plunger type) for watersupply fittings
Specification for self-closing taps for water supply
purposes
Specification for cast iron manhole covers and
frames
Methods for determination of arsenic
Machine tools -- Lubrication system
Specification for water meter boxes (domestic type)
Code of practice for selection, installation and
maintenance of domestic water meters
Specification for plastic seats and covers for waterclosets: Part 1 Thermoset seats and covers
Harness (dobby and jacquard) (Superseding IS
3341)
Specification for ferrules for water services
Specification for plug cocks for water supply
purposes
Specification for plastic seats and covers for waterclosets: Part 2 Thermo plastic seats and covers
Specification for vitreous sanitary appliances
(vitreous china): Part 1 General requirements
Specification for vitreous sanitary appliances
(vitreous china): Part 2 Specific requirements of
wash-down water-closets
Handbook on Functional Requirements of Industrial
Buildings (Lighting and Ventilation)
Specification for vitreous sanitary appliances
(vitreous china): Part 4 Specific requirements of
wash basins
Specification for vitreous sanitary appliances
(vitreous china): Part 5 Specific requirements of
laboratory sinks
Directly heated negative temperature co-efficient
IS 8909 : Part 4
IS 13984 : Part 1
IS 11547 : Part 1
IS 2556 : Part 9
IS 2556 : Part 14
IS 3042
IS 3489
IS 3950
IS 2685
IS 2963
IS 1885 : Part 4 :
Sec 5
IS 1885 : Part 4 :
Sec 4
IS 3006
IS 3311
IS 4038
IS 4346
IS 5219 : Part 1
IS 8712 : Part 1
IS 5312 : Part 2
IS 5434
IS 5455
IS 5917
thermistors: Part 1 General requirements and
methods of tests
Fixed resistors, general purpose, power: Part 4 Type
FRP 3
Specification for Link and Test Connectors:Part 1
Test Schedule and Requirements
Electronic weighing in-motion systems: Part 1
Terminology and design rules
Specification for vitreous sanitary appliances
(vitreous china): Part 9 Specific requirements of
bidets
Specification for vitreous sanitary appliances
(vitreous china): Part 14 Specific requirements of
integrated squatting pans
Specification for single faced sluice gates (200 to
1200 mm size)
Specification for enamelled steel bath tubs
Specification for surface boxes for sluice valves
Code of pracstice for selection, installation and
maintenance of sluice valves
Specification for copper alloy waste-fittings for
wash basins and sinks
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 5 Pulse terms
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 4 Cathode-ray tubes
Specification for chemically resistant glazed
stoneware pipes and fittings
Specification for waste plug and its accessories for
sinks and wash-basins
Specification for foot valves for water works
purposes
Specification for washers for use with fittings for
water services
Specification for cast copper alloys traps: Part 1 'P'
and 'S' traps
Guidelines for co-ordination of dimensions in
shipbuilding, Part 1 Principles of dimensional coordination
Specification for swing check type reflux (nonreturn) valves: Part 2 Multi-door pattern
Specification for non-ferrous alloy bottle traps for
marine use
Specification for cast-iron steps for manholes
Specification for vitreous (vitreous china) wash
basins for marine use
IS 5961
IS 6249
IS 6251
IS 6784
IS 8718
IS 6411
IS 7231
IS 8719
IS 8727
IS 8931
IS 9076
IS 9140
IS 9338
IS 9739
IS 9758
IS 9762
IS 11246
IS 12234
IS 12701
IS 13049
IS 13983
IS 712
IS 1624
IS 2541
IS 13114
Specification for cast iron gratings for drainage
purposes
Specification for flush valves and fittings for marine
use
Specification for shower fittings for marine use
Method for performance testing of water meters
(domestic type)
Specification for vitreous enamelled steel kitchen
sinks
Specification for gel-coated glass fibre reinforced
polyester resin bath tubs
Specification for plastic flushing cisterns for
waterclosets and urinals
Specification for vitreous siphonic wash-down water
closets for marine use
Specification for vitreous enamelled steel wash bsins
Specification for copper alloy fancy single taps,
combination tap assembly and stop valves for water
services
Specification for vitreous integrated squatting pans
for marine use
Method of sampling of vitrous and fire clay sanitary
appliances
Specification for cast iron screw-down stop valves
and stop and check valves for water works purposes
Specification for pressure reducing valves for
domestic water supply systems
Specification for flush valves and fittings for water
closets and urinals
Specification for polyethylene floats (spherical) for
float valves
Specification for glass fibre reinforced polyester
resins (GRP) squatting pans
Specification for plastic equilibrium floatvalve for
cold water services
Specification for rotational moulded polyethylene
water storage tanks
Specification for diaphragm type (plastic body) float
operated valves for cold water services
Specification for stainless steel sinks for domestic
purposes
Specification for building limes
Method of field testing of building lime
Code of practice for preparation and use of lime
concrete
Specification for forged brass gate, globe and check
IS 13349
IS 14399 : Part 1
IS 1635
IS 1849 : Part 1 :
Sec 1
IS 1849 : Part 1 :
Sec 2
IS 1849 : Part 2
IS 1861 : Part 1
IS 1861 : Part 2
IS 2686
IS 3068
IS 3115
IS 3182
IS 4098
IS 4139
IS 6508
IS 6932 : Part 2
IS 6932 : Part 3
IS 5817
IS 6932 : Part 1
IS 6932 : Part 4
IS 6932 : Part 5
IS 6932 : Part 6
IS 6932 : Part 7
IS 6932 : Part 8
valves for water works purposes
Specification for single faced cast iron thimble
mounted sluice gates
Hot press moulded thermosetting glass fibre
reinforced (GRP) sectional water storage tanks: Part
1
Code of practice for field slaking of building lime
and preparation of putty
Guide for design and installation of vertical mixedfeed lime kiln: Part 1 Lime stone Section 1 Masonry
type shaft
Guide for design and installation of vertical mixed
feed type lime kiln: Part 1 For limestone Section 2
RCC type shaft
Guide for design and installation of vertical mixedfeed type lime kiln: Part 2 For limeshell
Guide for manufacture of lime in vertical mixedfeed type kiln: Part 1 From lime-stone
Guide for manufacture of lime in vertical mixedfeed type kiln: Part 2 From limeshell
Specification for cinder as fine aggregates for use in
lime concrete
Specification for broken brick (burnt clay) coarse
aggregates for use in lime concrete
Specification for lime based blocks
Specification for broken brick (burnt clay) fine
aggregates for use in lime mortar
Specification for lime-pozzolana mixture
Specification for calcium silicate bricks
Glossary of terms relating to building lime
Determination of carbon dioxide content
Determination of residue on slaking of quicklime
Code of practice for preparation and use of limepozzolana mixture concrete in buildings and roads
Method of test for building limes Part 1
Determination of insoluble residue, loss on ignition,
insoluble matter, silicone dioxide, ferric and
aluminium oxide, calcium oxide and magnesium
oxide
Determination of fineness of hydrated lime
Determination of unhydrated oxide
Determination of volume yield of quicklime
Determination of compressive and transverse
strength
Determination of workability
IS 6932 : Part 9
IS 6932 : Part 11
IS 10049
IS 10359
IS 10360
IS 10772
IS 12894
IS 14401
IS 653
IS 657
IS 658
IS 809
IS 1195
IS 1196
IS 1197
IS 1198
IS 1443
IS 1542
IS 1630
IS 1661
IS 2114
IS 2394
IS 2571
IS 3461
IS 3462
IS 4441
IS 4442
Determination of soundness
Method of test for building limes: Part 11
Determination of setting time of hydrated lime
Code of practice for manufacture of lime based
blocks
Code of practice for manufacture and use of limepozzolana concrete blocks for paving
Specification for lime-pozzolana concrete blocks for
paving
Specification for quick setting lime pozzolana
mixture
Specification for fly ash lime bricks
Guidelines for handling and storage of building
limes
Specification for linoleum sheets and tiles
Specification for materials for use in the
manufacture of magnesium oxychloride flooring
compositions
Code of practice for magnesium oxychloride
composition floors
Specification for rubber flooring materials for
general purposes
Specification for bitumen mastic for flooring
Code of practice for laying bitumen mastic flooring
Code of practice for laying of rubber floors
Code of practice for laying, fixing and maintenance
of linoleum floor
Code of practice for laying and finishing of cement
concrete flooring tiles
Specification for sand for plaster
Specification for mason's tools for plaster work and
pointing work
Code of practice for application of cement and
cement-lime plaster finishes
Code of practice for laying in-situ terrazzo floor
finish
Code of practice for application of lime plaster
finish
Code of practice for laying in-situ cement concrete
flooring
Specification for PVC-asbestos floor tiles
Specification for unbacked flexible PVC flooring
Code of practice for use of silicate type chemical
resistant mortars
Code of practice for use of sulphur type chemical
IS 9118
IS 4443
IS 4456 : Part 2
IS 4457
IS 4631
IS 4860
IS 4971
IS 5317
IS 4832 : Part 1
IS 4832 : Part 3
IS 9115
IS 5318
IS 5491
IS 5766
IS 7956
IS 9197
IS 9510
IS 8819 : Part 1
IS 6339
IS 9704
IS 10403
IS 12583
IS 12866
IS 13026
resistant mortars
Method for measurement of pressure by means of
manometer
Code of practice for use of resin type chemical
resistant mortars
Methods of test for chemical resistant mortars: Part
II Sulphur type
Specification for ceramic unglazed vitreous acid
resisting tile
Code of practice for laying of epoxy resin floor
toppings
Specification for acid-resistant bricks
Recommendations for selection of industrial floor
finishes
Specification for bitumen mastic for bridge decking
and roads
Specification for chemical resistant mortars: Part I
Silicate type
Specification for chemical resistant mortars: Part III
Sulphur type
Method for estimation of incompressible fluid flow
in closed conduits by bend meters
Code of practice for laying of flexible PVC sheet
and tile flooring
Code of practice for laying of in-situ granolithic
concrete flooring topping
Code of practice for laying of burnt clay brick
flooring
Recommendations for selection of dairy floor
finishes
Specification for epoxy resin, hardners and epoxy
resin compositions for floor topping
Specification for bitumen mastic acid-resisting grade
Hold loading steel dumb barges, Part 1 Capacity and
dimensions
Methods of analysis of concentration, particle size
distribution and specific gravity of sediment in
streams and canals
Methods of tests for linoleum sheets and tiles
Glossary of terms relating to building finishes
Specification for corrugated bitumen roofing sheets
Specification for plastic translucent sheets made
from thermosetting polyester resin (glass fibre
reinforced)
Specification for bitumen mastic for flooring for
industries handling LPG and other light hydrocarbon
IS 8408
IS 13711
IS 13801
IS 13074
IS 13630 : Part 1
IS 13630 : Part 2
IS 13630 : Part 3
IS 13630 : Part 4
IS 13630 : Part 5
IS 13630 : Part 6
IS 13630 : Part 7
IS 13630 : Part 8
IS 13630 : Part 9
IS 13630 : Part
10
IS 13630 : Part
11
IS 13630 : Part
12
IS 8389
IS 1123
IS 13630 : Part
13
IS 13712
IS 13753
products
Planning and design of groynes in alluvial river Guidelines
Ceramic tiles - Sampling and basis for acceptance
Chequered cement concrete tiles - Specification
Code of practice for laying of bitumen mastic
flooring for industries handling LPG and other light
hydrocarbon products
Methods of test for ceramic tiles Part 1
Determination of dimensions and surface quality
Methods of test for ceramic tiles Part 2
Determination of water absorption
Methods of test for ceramic tiles Part 3
Determination of moisture expansion using boiling
water - Unglazed tiles
Methods of test for ceramic tiles Part 4
Determination of linear thermal expans ion
Methods of test for ceramic tiles Part 5
Determination of resistance to thermal shock
Methods of test for ceramic tiles Part 6
Determination of modulus of rupture
Methods of test for ceramic tiles Part 7
Determination of chemical resistance - Unglazed
tiles
Methods of test for ceramic tiles Part 8
Determination of chemical resistance - Glazed tiles
Methods of test for ceramic tiles Part 9
Determination of crazing resistance - Glazed tiles
Methods of test for ceramic tiles Part 10
Determination of frost resistance
Methods of test for ceramic tiles Part 11
Determination of resistance to surface abrasion Glazed tiles
Methods of test for ceramic tiles Part 12
Determination of resistance to deep abrasion Unglazed tiles
Code of practice for installation and use of
raingauges, recording
Method of identification of natural building stones
Methods of test for ceramic tiles Part 13
Determination of scratch hardness of surface
according to Mohs'
Ceramic tiles - Definitions, classifications,
characteristics and marking
Specification for dust pressed ceramic tiles with
water absorption of E EN 159:84 > 10% Group (B
IS 13754
IS 13755
IS 13756
IS 1121 : Part 1
IS 1121 : Part 4
IS 1122
IS 1124
IS 1125
IS 1126
IS 1127
IS 1129
IS 1130
IS 1805
IS 1706
IS 3316
IS 3620
IS 3622
IS 4121
IS 4122
IS 4348
IS 5640
IS 7779 : Part 4 :
Sec 1
III)
Specification for dust pressed ceramic tiles with
water absorption of 6% <E < 10% Group (B II b)
Specification for dust pressed ceramictiles with
water absorption of 3% < E < 6%Group (B II a)
Specification for dust pressed ceramic tiles with
water absorption of E < 3% Group B I
Methods of test for determination of strength
properties of natural building stones: Part I
Compressive strength
Methods of test for determination of strength
properties of natural building stones: Part IV Shear
strength
Method of test for determination of true specific
gravity of natural building stones
Method of test for determination of water
absorption, apparent specific gravity and porosity of
natural building stones
Method of test for determination of weathering of
natural building stones
Method of test for determination of durability of
natural building stones
Recommendations for dimensions and workmanship
of natural building stones for masonry work
Recommendation for dressing of natural building
stones
Specification for marble (blocks, slabs and tiles)
Glossary of terms relating to stones, quarrying and
dressing
Method for determination of resistance to wear by
abrasion of natural building stones
Specification for structural granite
Specification for laterite stone block for masonry
Specification for sandstone (slabs and tiles)
Method of test for determination of water
transmission rate by capillary action through natural
building stones
Method of test for surface softening of natural
building stones by exposure to acidic atmospheres
Methods of test for determination of permeability of
natural building stones
Method of test for determining aggregate impact
value of soft coarse aggregates
Schedule of properties and availability of stones for
construction purposes Part IV Karnataka states
Sections (1 to 3)
IS 8226
IS 6064
IS 11150
IS 10135
IS 8348
IS 8381
IS 9394
IS 800
IS 804
IS 4000
IS 8759
IS 14223 : Part 1
IS 13232
IS 12966 : Part 1
IS 801
IS 802 : Part 1 :
Sec 1
IS 802 : Part 1 :
Sec 2
IS 802 : Part 3
IS 806
IS 4014 : Part 1
IS 6533 : Part 1
IS 7215
Code of practice for installation and observation of
base plates for measurement of foundation
settlement in embankments
Specification for sounding and suspension
equipment
Construction of concrete barrages - Code of practice
Code of practice for drainage system for gravity
dams, their foundations and abutments
Code of practice for stacking and packing of stone
slabs for transportation
Recommended practice for quarrying stones for
construction purposes
Specification for stone lintels
Code of practice for general construction in steel
Rectangular pressed steel tanks
Code of practice for high strength bolts in steel
structures
Code of practice for maintenance and preservation
of stones in building
Specification for polished building stones: Part 1
Granite
Code of practice for installation, maintenance and
observation of electrical strain measuring devices in
concrete dams
Code of practice for galleries and other openings in
dams: Part 1 General requirements
Code of practice for use of cold formed light gauge
steel structural members in general building
construction
Code of practice for use of structural steel in
overhead transmission line towers, Part 1 Materials
and Loads and permissible stresses Section 1
Materials and Loads
Code of practice for use of structural steel in
overhead transmission line towers Part 1 : Material,
loads and permissible stress Section 2 Permissible
stress
Code of practice for use of structural steel in
overhead transmission line towers, part 3 Testing
Code of practice for use of steel tubes in general
building construction
Code of practice for steel tubular scaffolding Part 1
Definitions and materials
Code of practice for design and construction of steel
chimneys Part 1 Mechanical aspects )
Tolerances for fabrication of steel structures
IS 8081
IS 8640
IS 6533 : Part 2
IS 11402 : Part 1
IS 9178 : Part 1
IS 9178 : Part 2
IS 9178 : Part 3
IS 9964 : Part 1
IS 10987
IS 12843
SP 6 : Part 1
SP 6 : Part 4
SP 6 : Part 5
SP 6 : Part 6
IS 811
IS 1173
IS 1252
IS 1852
IS 1730
IS 1732
IS 1863
IS 1864
IS 3443
IS 3908
IS 3921
Specification for slotted sections
Recommendations for dimensional parameters for
industrial building
Code of practice for design and construction of steel
chimneys Part 2 Structural aspects
Specification for interchangeable magnetic single
disk cartridge,top loaded : Part 1 Physical and
magnetic characteristics
Criteria for design of steel bins for storage of bulk
materials Part 1 General requirements and
assessment of loads
Criteria for design of steel bins for storage of bulk
material Part 2 Design storage criteria
Criteria for design of steel bins for storage of bulk
materials Part 3 Bins designed for mass flow and
funnel flow
Recommendations for maintenance and operation of
petroleum storage tanks Part 1 Preparation of tanks
for safe entry and work
Code of practice for design, fabrication, testing and
installation of underground/above ground horizontal
cyclindrical storage tanks for petroleum products
Tolerances for erection of steel structures
Handbook for structural engineers - Structural steel
sections
Handbook for structural engineers - High strength
friction grip bolts
Handbook for structural engineers - Cold-formed,
light gauge steel structures
Handbook for structural engineers - Application of
plastic theory in design of steel structures
Cold formed light gauge structural steel sections
Hot rolled slit steel tee bars
Dimensions of hot rolled steel bulb angles
Rolling and cutting tolerances for hot rolled steel
products
Dimensions for steel plates,sheets strips and flats for
general engineering purposes
Dimensions for round and square steel bars for
structural and general engineering purposes
Hot rolled steel bulb flats
Hot-rolled steel L-sections for shipbuilding
Crane rail sections
Aluminium equal leg angles
Aluminium channels
IS 3964
IS 5384
IS 5488
IS 6445
IS 6449
IS 6475
IS 13276 : Part 3
IS 6476
IS 7452
IS 10182 : Part 2
IS 12778
IS 12779
IS 190
IS 656
IS 707
IS 876
IS 1141
IS 1150
IS 1326
IS 1329
IS 1331
IS 1898
IS 1900
IS 1902
IS 2179
IS 2203
IS 2372
IS 2377
IS 2408
Light rails
Aluminium I-beam
Dimensions and dimensional tolerances for hot
rolled steel plates for ship's hull structure
Aluminium tee-sections
Aluminium bulb angles for marine application
Aluminium tee bars for marine application
Evaluation of human exposure to whole-body
vibration - Part 3 Evaluation of expposure to
wholebody z-axis vertical vibration in the frequency
range 0.1 Hz to 0.63 Hz
Aluminium bulb plates for marine application
Specificatiion for hot-rolled steel sections for doors,
windows and ventilators
Dimensions and tolerances for hot-rolled track shoe
sections
Hot rolled steel parallel flange beam and column
sections - Dimensions
Rolling and cutting tolerances for hot rolled parallel
flange beam and column sections
Specification for coniferous sawn timber (baulks and
scantling)
Specification for logs for plywood
Glossary of terms applicable to timber technology
and utilization
Specification for wood poles for overhead power
and telecommunication lines
Code of practice for seasoning of timber
Trade names and abbreviated symbols for timber
species
Specification for non-coniferous sawn timber
(baulks and scantling)
Specification for aircaraft timber (baulks and
scantlings)
Specification for cut sizes of timber
Specification for timber for aircraft construction in
converted form (finished form)
Method of tests for wood poles
Code of practice for preservation of bamboo and
cane for non-structural purposes
Specification for converted timber for lorry bodies
Specification for wooden cross arms
Specification for timber for cooling towers
Tables for volume of cut sizes of timber
Method of static tests of timber in structural sizes
IS 2455
IS 2683
IS 2753 : Part 1
IS 3337
IS 3731
IS 2753 : Part 2
IS 3364 : Part 1
IS 3364 : Part 2
IS 4422
IS 4423
IS 4424
IS 4833
IS 4873
IS 4895
IS 4907
IS 4970
IS 5246
IS 5247 : Part 1
IS 5247 : Part 2
IS 5248
IS 5966
IS 6341
IS 6342
IS 6534
IS 7308
IS 8242
Method of sampling of model trees and logs and
their conversion for timber testing
Guide for installation of pressure impregnation
plants for timber
Methods for estimation of preservatives in treated
timber and in solutions Part 1 Deterrmination of
copper, arsenic, chromium, zinc, boron creosote and
fuel oil
Specification for ballies for general purposes
Specification for teak squares
Methods for estimation of preservatives in treated
timber and in treating solutions: Part 2
Determination of copper (in copper organic salt) and
pentachlorophenol
Methods of measurement and evaluation of defects
in timber: Part 1 Logs
Methods of measurement and evaluation of defects
in timber: Part 2 Converted timber
Specification for willow clefts for cricket bats
Guide for hand-sawing of timber
Specification for timber for use in coal mines
Method for field testing of preservatives in wood
species
Method for laboratory testing of wood preservatives
against fungi
Specification for teak logs
Methods of testing timber connectors
Key for identification of commercial timbers
Specificaion for coniferous logs
Specification for converted timber (coniferous) :
Part 1 Light furniture
Specification for converted timber (coniferous) :
Part 2 Packing cases amd crates
Specification for teak logs for production of sliced
veneers
Specification for non-coniferous timber in converted
form for general purposes
Method for laboratory test for efficacy of wood
preservatives against soft rot
Specification for rosewood logs for production of
sliced veneers
Guiding principles of grading and inspection of
timber
Specification for non-coniferous logs
Methods of tests for split bamboos
IS 6497
IS 6711
IS 7315
IS 8292
IS 8720
IS 9096
IS 9104
IS 9561
IS 9576
IS 10013 : Part 1
IS 10013 : Part 2
IS 10013 : Part 3
IS 10394
IS 10420
IS 10754
IS 11288
IS 13240
IS 13622
IS 10753
IS 11215
IS 12896
IS 13621
Method of test for the efficacy of preservatives and
evaluating the natural durability of timbers used in
cooling towers
Code of practice for maintenance of wood poles for
overhead power and telecommunication lines
Guidelines for design, installation and testing of
timber seasoning kilns
Method of test for evaluation of working quality of
timber under different wood working operations
Methods of sampling timber scantlings from depots
and their conversion for testing
Code of practice for preservation of bamboos for
structural purposes
Guide for storage and protection of logs and sawn
timber
Code of practice for felling and conversion of trees
into logs
Guide for mill sawing of timber
Specification for water soluble type wood
preservatives: Part 1 Acid-copper-chrome (ACC)
preservative
Specification for water soluble type wood
preservatives: Part 2 Copper-chrome-arsenic (CCA)
wood preservative
Specification for water soluble type wood
preservatives: Part 3 Copper-chrome-boron (CCB)
wood preservative
Specification for wooden sleepers for railway track
Method of determination of sound absorption coefficient of timber by standing wave method
Method of determination of thermal conductivity of
timber
Recommendations for off road transportation of
timber
Specification for walnut logs for production of sliced
veneers
Classification of Indian timbers for furniture and
cabinets
Code of practice for preservation of wooden sleepers
for railway track by pressure treatment
Methods for determination of moisture content of
timber and timber products
Classification of Indian timbers for door and
window shutters and frames
Method of test for determination of dielectric
constant of wood under microwave frequencies
S 962
IS 2661
IS 2662
IS 2663
IS 4878
IS 4919
IS 4993
IS 5197
IS 6408 : Part 2
IS 6820
IS 7564 : Part 1
IS 7564 : Part 2
IS 7973
IS 1038
IS 7564 : Part 3
IS 7564 : Part 4
IS 7564 : Part 5
IS 7921
IS 7922
IS 8338
Code of practice for architectural and building
drawings
Specification for mobile library van
Specification for packages for use of libraries
Design of buildings for archives - Recommendations
relating to its primary elements
Byelaws for construction of cinema buildings
Glossary of terms applicable to landscape and
horticulture work
Glossary of terms relating to modular co-ordination
Recommendations for layout and planning of
drawings offices
Recommendations for modular co-ordination in
building industry: Tolerances Part 2 Principles and
applications
Recommendations for modular co-ordination in
building industry: Applications
Recommendations for co-ordination of dimensions
in buildings-Arrangements of building components
and assemblies: Part 1 Functional group 1 Structures
Recommendations for co-ordination of dimensions
in buildings-Arrangements of buidings components
and assemblies: Part 2 Functional group 2 External
envelope
Code of practice for architectural and building
working drawings
Specification for steel doors, windows and
ventilators
Recommendations for co-ordination of dimensions
in buildings-Arrangements of building components
and assemblies: Part 3 Functional group 3
subdivision
Recommendations for co-ordination of dimensions
in buildings-Arrangements of buiding components
and assemblies: Part 4 Functional group 4 and
drainage
Recommendations for co-ordination of dimensions
in buildings-Arrangements of building components
and assemblies: Part 5 Functional group 5 Fixtures
furniture and equipment
Recommendations for modular co-ordination in
building industry : Horizontal co-ordination
Recommendations for modular co-ordination in
building industry: Vertical co-ordination
Recommendations relating to primary elements in
the design of school library buildings
IS 10316
IS 10600
IS 11775
IS 12073
IS 13612 : Part 1
IS 1361
IS 1948
IS 4020 : Part 1
IS 13613
IS 1003 : Part 1
IS 1003 : Part 2
IS 1081
IS 2191 : Part 2
IS 2202 : Part 2
IS 4351
IS 4962
IS 6198
IS 10428
IS 10451
IS 10521
IS 2202 : Part 1
IS 1950
IS 2526
Recommendations for modular co-ordination - basic
module and submodular increments (Equivalent to
ISO 1006 : 1973 and ISO 6514 : 1982)
Recommendations for modular co-ordination principles and rules
Recommendations for modular co-ordination:
notations and symbols for modular drawings
Recommendations for modular co-ordination: Coordinating sizes for doorsets and windowsets
Modular co-ordination for normal brickwork Recommendation Part 1 Burnt clay bricks
Specification for steel windows for industrial
buildings
Specification for aluminiium doors, windows and
ventilators
Door shutters - Methods of tests: Part 1 General
Recommendations for modular co-ordination in
building industry: Location of structural walls and
floor slabs
Specification for timber panelled and glazed
shutters: Part 1 Door Shutters
Specification for timber panelled and glazed
shutters: Part 2 Window ventilator shutters
Code of practice for fixing and glazing of metal
(steel and aluminium) doors, windows and
ventilators
Specification for wooden flush door shutters
(cellular and hollow core type): Part 2 Particle board
and hardboard face panels
Specification for wooden flush door shutters (solid
core type): Part 2 Particle board face panels and
hardboard face panels
Specification for steel door frames
Specification for wooden side sliding doors
Specification for ledged, braced and battened timber
door shutters
Glossary of terms relating to doors
Specification for steel sliding shutters (top hung
type)
Specification for collapsible gates
Specification for wooden flush door shutters (solid
core type): Part 1 Plywood face panels
Code of practice for sound insulation of nonindustrial buildings
Code of practice for acoustical design of auditoriums
and conferencne halls
IS 3362
IS 3483
IS 3792
IS 4954
IS 5499
IS 7662 : Part 1
IS 7942
IS 8827
IS 9736
IS 11907
IS 12332
IS 883
IS 965
IS 1414
IS 1597 : Part 2
IS 1634
IS 1649
IS 1834
IS 1838 : Part 1
IS 2115
IS 2116
IS 2204
IS 1838 : Part 2
Code of practice for natural ventilaltion of
residential buildings
Code of practice for noise reduction in industrial
buildings
Guide for heat insulation of non industrial buildings
Recommendations for noise abatement in town
planning
Code of practice for construction of underground
air-raid shelters in natural soil
Recommendations for orientation of buildings: Part
1 Non-industrial buildings
Code of practice for daylighting of educational
buildings
Recommendations for basic requirements of school
buildings
Glossary of terms applicable to acoustics in
buildings
Recommmendations for calculation of solar
radiation on buildings
Code of practice for ventilation in petro-chemical
plants and refineries
Code of practice for design of structural timber in
building
Specification for equivalent metric units for scales
dimensions and quantities in general construction
work
Code of practice for fixing wall covering
Code of practice for construction of stone masonry:
Part 2 Ashlar masonry
Code of practice for design and construction of
wood stairs for
Code of practice for design and construction of flues
chimneys domestic heating appliances
Specification for hot applied sealing compound for
joint in
Specification for preformed fillers for expansion
joint in pavements and structures (non extruding and
resilient type): Part Bitumen impregnated fibre
Code of practice for flat-roof finish, mud phuska
Specification for sand for masonry mortars
Code of practice for construction of reinforced
concrete shell roof
Specification for preformed fillers for expansion
joint in pavements and structures (non extruding and
resilient type) Part 2 Aldehyde resin and coconut
pith
IS 1946
IS 2110
IS 2119
IS 2212
IS 2366
IS 2441
IS 2527
IS 2700
IS 2792
IS 2858
IS 3629
IS 3630
IS 3670
IS 4101 : Part 1
IS 4101 : Part 2
IS 4407
IS 4891
IS 4920
IS 5390
IS 4101 : Part 3
IS 4924 : Part 1
IS 5119 : Part 1
IS 5389
IS 6061 : Part 2
IS 6313 : Part 1
IS 6313 : Part 2
IS 6313 : Part 3
Code of practice for use of fixing devices in walls,
ceilings and of solid construction
Code of practice for in-situ construction of walls, in
building soil-cement
Code of practice for construction of brick-cumconcrete composite (terrace) floor or roof
Code of practice for brickwork
Code of practice for nail-jointed timber construction
Code of practice for fixing ceiling covering
Code of practice for fixing rainwater gutters and
downpipes for drainage
Code of practice for roofing with wooden shingles
Code of practice for design and construction of stone
slab over floor
Code of practice for roofing with mangalore tiles
Specification for structural timber in building
Code of practice for construction of non-load
bearing gypsum partitions
Code of practice for construction of timber floors
Code of practice for external facing and veneers:
Part I Stone facing
Code of practice for external facing and veneers:
Part II Cement facing
Code of practice for reed walling
Specification for preferred cut sizes of structural
timber
Glossary of terms applicable to roof coverings
Code of pracatice for construction of timber ceiling
Code of practice for external facing and veneers:
Part III wall tiling mosaics
Method of test for nail jointed timber trusses: Part I
Destructive test
Code of practice for laying and fixing of sloped roof
coverings: Part Slating
Code of practice for laying of hardwood parquet and
wood block floors
Code of practice for construction of floor and roof
with joists and blocks: Part 2 With hollow clay filler
blocks
Code of practice for anti-termite measures in
buildings: Part Constructional measures
Code of practice for anti-termite measures in
buildings: Part Pre-constructional chemical
treatment measaures
Code of practice for anti-termite measures in
IS 6332
IS 6509
IS 7683
IS 9472
IS 10388
IS 10439
IS 11134
IS 12727
IS 13077
IS 204 : Part 1
IS 10440
IS 10566
IS 10957
IS 10958
IS 10959
IS 11096
IS 11433 : Part 1
IS 11433 : Part 2
IS 11817
IS 11818
IS 12093
IS 12118 : Part 1
IS 12118 : Part 2
buildings: Part 3 buildings
Code of practice for construction of floor and roofs
using doubly-curve d shell units
Code of practice for installation of joints in concrete
pavements
Code of practice for design, fabrication and
maintenance of nail timber posts from small
dimensional timber for overhead distribution lines
for low voltage
Code of practice for laying mosaic parquet flooring
Specification for corrugated coir wood wool cement
roofing sheets
Code of practice for patent glazing
Code of practice for setting out of buildings
Code of practice for no fines cast in situ cement
concrete
Guide for preparation and use of mud mortar in
masonary
Specificaion for tower bolts: Part 1 Ferrous metals
Code of practice for construction of reinforced brick
and r.b.c. and roofs
Methods of test for preformed fillers for expansion
joints in paving and structural construction
Glossary of terms applicable for joints in building
(ISO 2444-1974)
General check list of functions of joints in building
(ISO 3447-1975)
Glossary of terms for sealants for building purposes
(ISO 6927-1981)
Code of practice for design and construction of boltjointed construction
Specification for one part grade polysulphide base
joints sealant Part General requirements
Specification for one part grade polysulphide based
joint sealant:Part Methods of test
Classification of joints in buildings for
accommodation of dimensional deviations during
construction (ISO 7727-1984)
Method of test for laboratory determination of air
permeability of joints in buildings (ISO 6589-1983)
Code of practice for laying and fixing of sloped roof
coverings using plain and corrugated galvanized
steel sheets
Specification for two parts polysulphide based
sealants: Part 1 General requirements
Specification for two parts polysulphide based
IS 204 : Part 2
IS 205
IS 206
IS 208
IS 362
IS 364
IS 452
IS 453
IS 729
IS 1019
IS 1341
IS 1495
IS 1823
IS 1837
IS 2209
IS 2681
IS 3818
IS 3828
IS 3843
IS 3847
IS 4621
IS 4948
IS 4992
IS 5187
IS 5930
IS 6315
IS 6318
IS 6607
IS 7196
IS 6343
IS 7197
IS 7534
IS 7540
sealants: Part 2 Methods of test
Specification for tower bolts: Part 2 Non-ferrous
metals
Specification for non-ferrous metal butt hinges
Specification for tee and strap hinges
Specification for door handles
Specification for parliament hinges
Specification for fanlight catch
Specification for door springs, rat-tail type
Specification for double acting spring hinges
Specification for drawer locks, cupboard locks and
box locks
Specification for rim latches
Specification for steel butt hinges
Specification for mild steel dust-bins
Specification for floor door stoppers
Specification for fanlight pivots
Specification for mortice locks (vertical type)
Specification for non-ferrous metal sliding door
bolts (aldrops) for with padlocks
Specification for continuous (Piano) hinges
Specification for ventilator chains
Specification for steel back flap hinges
Specification for mortice night latches
Specification for indicating bolts for use in public
baths and
Specification for welded steel wire fabric for general
use
Specification for door handles for mortice lock
(vertical type)
Specification for flush bolts
Specification for mortice latch (vertical type)
Specification for floor springs (hydraulically
regulated) for heavy
Specification for plastic window stays and fasteners
Specification for rebated mortice locks (vertical
type)
Specification for hold fast
Specification for door closers (pneumatically
regulated) for light weighing up to 40 kg
Specification for double action floor springs
(without oil check) heavy door
Specification for sliding locking bolts for use with
padlocks
Specification for mortice dead locks
IS 7881 : Part 1
IS 7881 : Part 2
IS 8756
IS 8760
IS 9106
IS 9131
IS 9460
IS 9899
IS 10019
IS 10090
IS 10342
IS 12817
IS 12867
IS 303
IS 652
IS 709
IS 849
IS 850
IS 852
IS 851
IS 1658
IS 1659
IS 2380 : Part 22
IS 2380 : Part 23
IS 3087
IS 3129
IS 3308
IS 3348
IS 3513 : Part 1
IS 3513 : Part 2
Glossary of terms relating to builder's hardware: Part
1 Locks
Glossary of terms relating to builder's hardware: Part
2 Latches
Specification for mortice ball catches for use in
wooden almirah
Specification for mortice sliding door locks, with
lever mechanism
Specification for rising butt hinges
Specification for rim lockes
Specification for flush drop handles for drawer
Specification for hat, coat and wardrobe hooks
Specification for mild steel stays and fasteners
Specification for numericals
Specification for curtain rail system
Specification for stainless steel butt hinges
Specification for PVC hand rails covers
Specification for plywood for general purposes
Specification for wooden separators for lead-acid
storage batteries
Specification for medium strength aircraft plywood
Specification for cold setting case in glue for wood
Specification for natural sour (lactic) casein for glue
manufacture
Specification for animal glue for general woodworking purposes
Specification for synthetic resin adhesives for
construction work (non-structural) in wood
Specification for fibre hardboards
Specification for block boards
Method of test for wood particle boards and boards
from other lignocellulosic materials: Part 22
Determination of surface glueability test
Method of test for wood particle boards and boards
from other lignocellulosic materials: Part 23
Vibration tests for particle boards
Specification for wood particle boards (medium
density) for general purposes
Specification for low density particle boards
Specification for wood wool building slabs
Specification for fibre insulation boards
Specification for resin treaated compressed wood
laminates (compregs) Part 1 For electrical purposes
Specification for resin treated compressed wood
laminates (compregs):Part 2 For chemical purposes
IS 3513 : Part 4
IS 4834
IS 4859
IS 4990
IS 5539
IS 10701
IS 12049
IS 12077
IS 7316
IS 9188
IS 9307 : Part 1
IS 12053
IS 12120
IS 12406
IS 13745
IS 13957
IS 13958
IS 14276
IS 14315
IS 14587
IS 14588
IS 14616
IS 2095 : Part 1
IS 2095 : Part 3
IS 2469
Specification for high and medium density wood
lainates (compreg): Part 4 Sampling and tests
Specification for veneered wood boards for packing
cases
Specification for high strength aircraft plywood
Specification for plywood for concrete shuttering
work
Specification for preservative treated plywood
Specification for structural plywood
Dimensions and tolerances relating to wood based
panel materials
Code of practice for testing of timbers for plywood
manufacture
Specification for decorative plywood using plurality
of veneers for decorative faces
Performance requirements for adhesive for structural
laminated wood products foruse under exterior
exposure condition
Methods of test for wood based structural sandwitch
construction: Part 1 Flexure test
Code of practice for the preparation and application
of putty for repairing plywood and other wood based
panels
Code of practice for preservation of plywood and
other panel products
Specification for medium density fibreboards for
general purposes
Method for determination of formaldehyde content
in particle board by extraction method called
perforator method
Specification for metal faced plywood
Specification for bamboo mat board for general
purposes
Specification for cement bonded particle boards
Specification for commercial veneers
Specification for prelaminated medium density fibre
board
Specification for bamboo mat veneer composite for
general purposes
Specification for laminated veneer lumber
Specification for gypsum plaster boards Part 1 Plain
gypsum plaster boards
Specification for gypsum plaster boards Part 3
Reinforced Gypsum plaster boards
Glossary of terms relating to gypsum
IS 2542 : Part 1 :
Sec 1
IS 9498
IS 2547 : Part 1
IS 2547 : Part 2
IS 2849
IS 8272
IS 12654
IS 12679
IS 13001
IS 884
IS 901
IS 902
IS 903
IS 904
IS 905
IS 906
IS 907
IS 909
IS 956
IS 2097
IS 910
IS 937
IS 940
IS 943
Normal consistency of gypsum plaster
Specification for inorganic aggregates for use in
gypsum plaster
Specification for gypsum building plaster: Part 1
Excluding premixed lightweight plaster
Specification for gypsum building plaster: Part 2
Premixed lightweight plaster
Specification for non-load bearing gypsum partition
blocks (solid and hollow types)
Specification for gypsum plaster for use in the
manufacture of fibrous plaster boards
Code of practice for use of low grade gypsum in
building industry
Specification for By-product gypsum for use in
plaster, blocks and boards
Guidelines for manufacture of gypsum plaster in
Mechanized pan system
Specification for first-aid hose reel for fire fighting
Specification for couplings, double male and double
female, instantaneous pattern for fire fighting
Specification for suction hose couplings for fire
fighting purposes
Specification for fire hose delivery couplings,
branch pipe, nozzles and nozzle spanner
Specification for 2-way and 3-way suction collecting
heads for fire fighting purposes
Specification for delivery breechings, dividing and
collecting instantaneous pattern for fire fighting
purposes
Specification for revolving branch pipe for fire
fighting
Specification for suction strainers, cylindrical type
for fire fighting purposes
Specification for underground fire hydrant, sluice
valve type
Functional requirements for rescue tender for air
fields
Specification for foam making branch pipe
Specification for combined key for hydrant, hydrant
cover and lower valve
Specification for washers for water fittings for fire
fighting purposes
Specification for portable fire extinguisher, water
type (gas cartridge)
Functional requirements for 680-l/min trailer pump
IS 944
IS 1941 : Part 1
IS 2171
IS 2175
IS 2189
IS 2190
IS 2298
IS 2546
IS 2696
IS 2745
IS 2871
IS 2930
IS 3744
IS 4308
IS 4643
IS 3582
IS 3844
IS 4151
IS 4861
IS 4862 : Part 1
IS 4928
IS 4947
IS 4989 : Part 1
for fire brigade use
Functional requirements for 1800-l/min trailer pump
for fire brigade use
Functional requirements for electric motor sirens:
Part 1 ac 3 phase 50 hz, 415 volts type
Specification for portable fire extinguishers,dry
powder (cartridge type)
Specification for heat sensitive fire detectors for use
in automatic fire alarm system
Code of practice for selection, installation and
maintenance of automatic fire detection and alarm
system
Code of practice for selection, installation and
maintenance of portable first-aid fire extinguishers
Specification for single-barrel stirrup pump for fire
fighting purposes
Specification for galvanized mild steel fire bucket
Functional requirements for 1125-l/min light fire
engine
Specification for non-metal helmet for firemen and
civil defence personnel
Specification for branch pipe, universal for fire
fighting purposes
Functional requirements for hose laying tender for
fire brigade use
Specification for hose binding machine
Specification for dry powder for fire fighting
Specification for suction wrenches for fire brigade
use
Specification for basket strainers for fire fighting
purposes (cylindrical type)
Code of practice for installation and maintenance of
internal fire hydrants and hose reels on premises
Specification for protective helmets for scooter and
motorcycle riders
Specification for dry powder for fighting fires in
burning metals
Specification for portable fire extinguishers for
aircraft : Part 1 Halon 1211 Type
Specification for delivery valve for centrifugal fire
pump outlets
Specification for gas cartridges for use in fire
extinguishers
Specification for foam concentrate (compound) for
producing mechanical foam for fire fighting:Part I
Protein foam
IS 4989 : Part 3
IS 5131
IS 5290
IS 5486
IS 5490 : Part 1
IS 5505
IS 5612 : Part 1
IS 6026
IS 7673
IS 7692
IS 5612 : Part 2
IS 5888
IS 5896 : Part 1
IS 5896 : Part 3
IS 6070
IS 6234
IS 8096
IS 8149
IS 8423
IS 8442
IS 9562
IS 9668
IS 9695
IS 9972
IS 9973
Specification for foam concentrate (compound) for
producing foam for fire fighting: Part 3 Fluoro
protein foam
Specification for dividing breeching with control for
fire brigade use
Specification for landing valves
Specification for quick release knife
Specification for refills for portable fire
extinguishers and chemical fire engines: Part 1 For
soda acid portable fire extinguishers
Specification for multi-edged rescue axe (nonwedging)
Specification for hose-clamps and hose-bandages for
fire brigade use: Part 1 Hose-clamps
Specification for hand operated sirens
Glossary of terms for fire fighting equipment
Specification for wooden headforms for testing of
helmets
Specification for hose-clamps and hose bandages for
fire brigade use: Part 2 Ho se bandages
Code of practice for design and construction of fire
service drill-tower
Code of practice for selection, operation and
maintenance of special fire fighting appliances: Part
1 Combined foam and crash tender
Code of practice for selection, operation and
maintenance of special fire fighting appliances: Part
3 Turntable ladders
Code of practice for selection, operation and
maintenance of trailer fire pumps, portable pumps,
water tenders and motor fire engines
Specification for portable fire extinguishers,water
type (stored pressure)
Specification for fire beaters
Functional requirements for twin co2 fire
extinguishers (trolley mounted)
Specification for controlled percolating hose for fire
fighting
Functional requirements for stand post type water
monitor for fire fighting
Specification for non-metal helmet for police force
Code of practice for provision and maintenance of
water supplies and fire fighting
Methods of sampling of helmets
Specification for automatic sprinkler heads
Specification for visor for scooter helmets
IS 9995
IS 10204
IS 10460
IS 11833
IS 10993
IS 11070
IS 11360
IS 12717
IS 12796
IS 12805
IS 12835 : Part 1
IS 12853
IS 12861
IS 12862
IS 13039
IS 13385
IS 13386
IS 13849
IS 1498
IS 1725
IS 1892
IS 2132
IS 2810
IS 4434
IS 2720 : Part 2
IS 2720 : Part 3 :
Specification for visor for non-metal police and
firemen's helmets
Specification for portable fire extinguisher
mechanical foam type
Functional requirements for small foam tender for
fire brigade use
Specification for dry powder fire extinguisher for
metal fires
Functional requirements for 2000 kg dry powder
tender for fire brigade use
Specification for bromochlorodifluoromethane
(halon-1211) for fire fighting
Specification for smoke detectors for use in
automatic electrical fire alarm system
Functional requirements of fire fighting equipment High capacity portable pumpset (1100-1600 L/min)
Specification for fire rake
Tool Mcleod for fighting forest fires
Code of practice for design and installation of fixed
fire extinguishing system Part 1 Low expansion
foam
Specification for pulaski tool for forest fire
Specification for double bit axe for forest fire
Specification for fire fighting shovel for forest fires
Code of practice for provision and maintenance of
external hydrant system
Specification for fire extinguisher 50 capacity wheel
mounted water type (Gas Cartridge)
Specification for 50 l capacity fire extinguisher,
mechanical foam type
Specification for portable fire extinguisher dry
powder type (constant pressure)
Classification and identification of soils for general
engineering purposes
Specification for soil based blocks used in general
building construction
Code of practice for subsurface investigations for
foundations
Code of practice for thin walled tube sampling of
soils
Glossary of terms relating to soil dynamics
Code of practice for in-situ vane shear test for soils
Methods of test for soils: Part 2 Determination of
water content
Methods of test for soils: Part 3 Determination of
Sec 1
IS 2720 : Part 6
IS 2720 : Part 9
IS 2720 : Part 10
IS 2720 : Part 11
IS 2720 : Part 12
IS 2720 : Part 20
IS 2720 : Part 22
IS 2720 : Part 23
IS 2720 : Part 25
IS 2720 : Part 27
IS 8763
IS 9198
IS 9259
IS 2720 : Part 28
IS 2720 : Part 30
IS 2720 : Part 33
IS 2720 : Part 35
IS 2720 : Part 36
IS 2720 : Part 37
IS 2720 : Part 38
specific gravity Section 1 fine grained soils
Methods of test for soils: Part 6 Determination of
shrinkage factors
Methods of test for soils: Part 9 Determination of
dry density- moisture content relation by constant
weight of soil method
Methods of test for soils: Part 10 Determination of
unconfined compressive strength
Methods of test for soils: Part 11 Determination of
the Shear Strength Parameters of a specimen tested
in inconsolidated, indrained triaxial compression
without the measurement of pore water pressure
Methods of test for soils: Part 12 Determination of
shear strength paramets of soil from consolidated
undrained triaxial compression test with
measurement of pore water pressure
Methods of test for soils: Part 20 Determination of
linear shrinkage
Methods of test for soils: Part 22 Determination of
organic matter
Methods of test for soils: Part 23 Determination of
calcium carbonate
Methods of test for soils: Part 25 Determination
silica sesquioxide ratio
Methods of test for soils: Part 27 Determination of
total soluble sulphates
Guide for undistrubed sampling of sands and sandy
soils
Specification for compaction rammer for soil testing
Specification for liquid limit apparatus for soils
Methods of test for soils: Part 28 Determination of
dry density of soils inplace, by the sand replacement
method
Methods of test for soils: Part 30 Laboratory vane
shear test
Methods of test for soils: Part 33 Determination of
the density in place by the ring and water
replacement method
Methods of test for soils: Part 35 Measurement of
negative pore water pressure
Methods of test for soils: Part 36 Laboratory
determination of permeability of granular soils
(constant head)
Methods of test for soils: Part 37 Determination of
sand equivalent values of soils and fine aggregates
Methods of test for soils: Part 38 Compaction
IS 4332 : Part 1
IS 4332 : Part 3
IS 4332 : Part 4
IS 4332 : Part 5
IS 4332 : Part 8
IS 9640
IS 9669
IS 10077
IS 4332 : Part 10
IS 4968 : Part 1
IS 4968 : Part 3
IS 9214
IS 10042
IS 10074
IS 10108
IS 10379
IS 10442
IS 10589
IS 10837
IS 11196
IS 11209
control test (hilf method)
Methods of test for stabilized soils: Part 1 Methods
of sampling and preparation of stabilized soils for
testing
Methods of test for stabilized soils: Part 3 Test for
determination of moisture content-dry density
relation for stablized soils mixtures
Methods of test for stabilized soilos: Part 4 Wetting
and drying, freezing and thawing tests for
compacted soil-cement mixtures
Methods of test for stabilizd soils: Part 5
Determination of unconfined compressive strength
of stablized soils
Methods of test for stablized soils: Part 8
Determination of lime content of lime stablized soils
Specification for split spoon sampler
Specification for CBR moulds and its accessories
Specification for equipment for determination of
shrinkage factors
Methods of test for stabilized soils: Part 10 Test for
soil/bituminous mixtures
Method for subsurface sounding for soils: Part 1
Dynamic method using 50 mm cone without
betonite slurry
Method for subsurface sounding for soils: Part 3
Static cone penetration test
Method for determination of modulus of sub-grade
reaction (k-value) of soils in the field
Code of practice for site-investigations for
foundation in gravel boulder deposits
Specification for compaction mould assembly for
light and heavy compaction test for soils
Code of practice for sampling of soils by thin wall
sampler with stationery piston
Code of practic for field control of moisture and
compaction of soils of embankment and subgrade
Specification for earth augers (spiral type)
Specification for equipment for determination of
subsurface sounding of soils
Specification for moulds and accessories for
determination of density index (relative density) of
cohesionless soils
Specification for equipment for determination of
liquid limit of soils cone penetration method
Specification for mould assembly for determination
of permeability of soils
IS 11229
IS 11593
IS 11594
IS 12979
IS 12175
IS 12287
IS 13468
SP 36 : Part 1
SP 36 : Part 2
IS 1742
IS 2064
IS 2065
IS 2470 : Part 1
IS 2470 : Part 2
IS 3114
IS 4111 : Part 1
IS 4111 : Part 2
IS 4111 : Part 3
IS 4111 : Part 4
IS 4127
IS 5329
IS 5611
IS 4111 : Part 5
IS 5822
IS 6295
Specification for shear box for testing of soils
Specification for shear box (large) for testing of soils
Specification for thin walled sampling tubes and
sampler heads
Specification for mould for determination of linear
shrinkage
Specification for rapid moisture meter for rapid
determination of water content for soil
Specification for consolidometer for determination
of consolidation properties
Specification for apparatus for determination of dry
density of soils by core cutter method
Compendium of Indian standards on soil
engineering: Part 1 Laboratory testing
Compendium of Indian standards on soil
engineering: Part 2 Field testing
Code of practice for building drainage
Code of practice for selection, installation and
maintenance of sanitary appliances
Code of practice for water supply in buildings
Code of practice for installation of septic tanks: Part
I design, criteria and construction
Code of practice for installation of septic tanks: Part
II Secondary treatment and disposal of septic tank
effluent
Code of practice for laying of cast iron pipes
Code of practice for ancillary structures in sewerage
system: Part I Manholes
Code of practice for ancillary structures in sewerage
system: Part II Flusing tanks
Code of practice for ancillary structures in sewerage
system: Part III Inverted syphon
Code of practice for ancillary structures in sewerage
system: Part IV Tidal outfalls
Code of practice for laying of glazed stoneware
pipes
Code of practice for sanitary pipe work above
ground for buildings
Code of practice for waste stabilization ponds
(faculative type)
Code of practice for ancillary structures in sewerage
system: Part 5 Tidal outfalls
Code of practice for laying of welded steel pipes for
water suypply
Code of practice for water supply and drainage in
high altitudes and/or sub-zero temperature regions
IS 7558
IS 7740
IS 10446
IS 11208
IS 11906
IS 11925
IS 12183 : Part 1
IS 12251
IS 12288
IS 12314
IS 4082
IS 10067
IS 10302
IS 654
IS 1464
IS 1478
IS 2180
IS 2222
IS 2248
IS 2690 : Part 1
IS 2690 : Part 2
IS 2691
IS 3367
IS 3495
IS 3583
IS 3951 : Part 1
Code of practice for_domestic hot water installations
Code of practice for construction and maintenance
of road gullies
Glossary of terms relating to water supply and
sanitation
Guidelines for registration of plumbers
Recommendations for cement mortar lining for cast
iron mild steel and ductile-iron pipes and fittings for
transportation of water
Specification for pitch-impregnated fibre pipes and
fittings for drainage purposes
Code of practice for plumbing in multi-storeyed
buildings: Part 1 Water supply
Code of practice for drainage of building basements
Code of practice for use and laying of ductile iron
pipes
Code of practice for sanitation with leaching pits for
rural community
Recommendations on stacking and storage of
construction materials and components at site
Material constants in building works
Unified nomenclature of workmen for civil
eningeering
Specification for clay roofing tiles, mangalore
pattern
Specification for clay ridge and ceiling tiles
Specification for clay flooring tile
Specification for heavy duty burnt clay building
bricks
Specification for burnt clay perforated building
bricks
Glossary of terms relating to clay products for
building
Specification for burnt clay flat terracing tiles: Part 1
Machine made
Specification for burnt clay flat terracing tiles: Part 2
Hand made
Specification for burnt clay facing bricks
Specification for burnt clay tiles for use in lining
irrigation and drainage works
Method of test for burnt clay building bricks: Part 1
to 4
Specification for burnt clay paving bricks
Specification for hollow clay tiles for floors and
roofs Part 1 Filler type
IS 3951 : Part 2
IS 3952
IS 3978
IS 4885
IS 5454
IS 5779
IS 6165
IS 7556
IS 11650
IS 13757
IS 3201
IS 13317
IS 10297
IS 10505
IS 11447
IS 10 : Part 1
IS 10 : Part 2
IS 10 : Part 3
IS 10 : Part 4
IS 10 : Part 5
IS 620
IS 1503
IS 1707
IS 2133
IS 2674
IS 2891
IS 2892
IS 2893
IS 2894
Specification for hollow clay tiles for floors and
roofs Part 2 Structural type
Specification for burnt clay hollow bricks for walls
and partitions
Code of practice for manufacture of burnt clay
Mangalore pattern roofing tiles
Specification for sewer bricks
Methods of sampling of clay building bricks
Specification for burnt clay soling bricks
Dimensions for special shapes of clay bricks
Specification for burnt clay jallies
Guide for manufacture of common burnt clay
building bricks by semi-mechanized process
Specification for burnt clay fly ash building bricks
Criteria for design and construction of precasttrusses and purlins
Specification for clay roofing camty tiles, half round
and flat tiles
Code of practice for design and construction of
floors and roofs using precast reinforced/prestressed
concrete ribbed or cored slab unit
Code of practice for construction of floors and roofs
using precast concrete waffle units
Code of practice for construction with large panel
prefabricates
Specification for plywood tea-chests, Part 1 General
Specification for plywood tea-chest: Part 2 Plywood
Specification for plywood tea-chests, Part 3 Battens
Specification for plywood tea-chests, Part 4 Metal
fittings
Specification for plywood tea-chests, Part 5
Assembly and packing
Specification for wooden tool handles general
requirements
Wooden packing cases
Specification for wood wool for general packaging
purposes
Specification for wooden tent pins
Specification for battened plywood cases
Specification for wooden handles for felling axes
and hand axes
Specification for wooden handles for picks and
beaters
Specification for wooden handles for adzes
Specification for wooden handles for wood working
IS 2896
IS 2897
IS 2922
IS 3053
IS 2895
IS 3071
IS 3084
IS 3728
IS 3805
IS 3806
IS 4435
IS 4650
IS 4953
IS 5942
IS 6641
IS 6642
IS 6643
IS 6644
IS 6656
IS 6676
IS 6703
IS 6729
IS 7344
IS 7548
IS 7549
IS 7550
IS 7630
IS 7698
IS 7850
IS 7992
IS 8295 : Part 1
IS 8295 : Part 2
IS 8725
IS 8726
IS 9590
IS 10145
chisels and gouges
Specification for wooden handles for carpenters'
augers
Specification for wooden handles for shovels
Specification for wooden tent mallets
Specification for cane baskets for general purposes
Specification for wooden handles for engineers' file
and engineers' scrapers
Specification for wooden crates
Specification for pencil slats
Specification for wooden boxes for packaging of
apples
Specification for pent-top wooden cases
Specification for wooden beaters
Specification for wooden ladders and trestles
Specification for anvil wooden blocks
Specification for wooden handles for hand hammers
Specification for wooden handles for POWRAHS
Specification for wooden disc for tents
Specification for mason's mallets
Specification for wooden pins for bivouac tents
Specification for tinman's mallets
Specification for caulking mallets
Specification for bossing (plumbers), mallets
Glossary of wooden packaging terms
Specification for wooden paddles
Specification for bamboo tent poles
Specification for vase for store tent
Specification for timber half wrought for sporting
rifles
Specification for cane baskets for ration
Specification for plywood drums
Specification for returnable wooden crates for
vegetables
Specification for wooden box for microscope slides
Specification for plywood cases for packing tobacco
for export
Specification for bamboo chicks: Part 1 Fine
Specification for bamboo chicks: Part 2 Coarse
Specification for wirebound wooden boxes
Specification for wirebound wooden crates
Specification for non-returnable wooden boxes for
horticulture produce
Specification for bamboo supports for camouflaging
equipment
IS 10324
IS 10402
IS 10499
IS 10687
IS 11100
IS 11106
IS 11131
IS 1477 : Part 2
IS 2338 : Part 1
IS 2338 : Part 2
IS 2395 : Part 2
IS 2524 : Part 1
IS 3140
IS 1883
IS 2695
IS 2524 : Part 2
IS 4597
IS 5807 : Part 1
IS 5807 : Part 2
IS 5807 : Part 3
IS 5807 : Part 4
IS 5807 : Part 5
IS 14428
SP 1650
IS 1829 : Part 1
Specification for wooden crates for bottled drinks
Specification for pin-needle hard board boxes for
packaging of apples
Specification for wooden-toggles
Guidelines for nailing of large frames wooden
containers
Specification for sweeping brooms
Specification for carpenter's mallets
Specification for wooden casks and barrels
Code of practice for painting of ferrous metals in
buildings: Part2 Painting
Code of practice for finishing of wood and wood
based materials: Part 1 Operations and workmanship
Code of practice for finishing of wood and wood
based materials: Part 2 Schedules
Code of practice for painting concrete, masonry and
plaster surfaces: Part 2 Schedule
Code of practice for painting of nonferrous metals in
buildings: Part 1 Pretreatment
Code of practice for painting asbestos cement
building products
Specification for metal shelving racks adjustable
type
Specification for drawing filing equipment
Code of practice for painting of non-ferrous metals
in buildings: Part 2 Painting
Code of practice for finishing of wood and wood
based products with nitrocellulose and cold
catalysed materials
Methods of test for clear finishes for wooden
furniture: Part 1 Resistance to dry heat
Methods of test for clear finishes for wooden
furniture: Part 2 Resistance to wet heat
Methods of test for clear finishes for wooden
furniture: Part 3 Resistance to marking by oils and
fats
Methods of test for clear finishes for wooden
furniture: Part 4 Resistance to marking by liquids
Methods of test for clear finishes for wooden
furniture: Part 5 Test for low angle glare
Guidelines for painting of metallic structures in
aggressive chemical environment
Standard colours for building and decorative finishes
(with supplement)
Specification for library furniture and fittings: Part 1
Timber
IS 1829 : Part 2
IS 3312
IS 3314
IS 3497
IS 3498
IS 3663
IS 3762
IS 3763
IS 3845
IS 3499 : Part 1
IS 3499 : Part 2
IS 4103
IS 4116
IS 4205
IS 4415
IS 4837
IS 4838
IS 5391
IS 5416 : Part 1
IS 5533
IS 5967 : Part 1
IS 5967 : Part 2
IS 5974
IS 6179
IS 6188
IS 6189
IS 6632
IS 7076
IS 7760
IS 7761
Specification for library furniture and fittings: Part 2
Steel
Specification for steel shelving cabinets (adjustable
type)
Specification for steel clothes lockers
Specification for steel wardrobes (adjustable type)
Specification for metal table (office type)
Dimensions of tables and chairs for general office
purposes
Specification for metal waste paper bins
Specification for metal folding chairs
Code of practice for joints used in wooden furniture
Specification for metal chairs for office purposes:
Part I non-revolving and non-tilting
Specification for metal chairs for office purposes:
Part II Revolving and tilting
Specification for metal nesting chairs
Specification for wooden shelving cabinets
(adjustable type)
Specification for drafting stools
Glossary of terms relating to wooden furniture and
fixtures
Recommendations for school furniture, class-room
chairs and tables for use in schools
Anthropometric dimensions for school children age
group 5-17 years
Specification for adjustable metal chairs for use of
typists and operators in telephone exchanges
Method of test for strength and stability of chairs
and stools Part 1 Strength
Recommendations for dimensions for spaces for
human activities
Methods of test for strength and stability of tables
and trolleys: Part 1
Methods of test for strength and stability of tables
and trolleys : Part 2 Stability
Specification for divans and easy chairs
Specification and safety requirements for rigid side
playpens
Specification for wooden bedside table
Specification for metal stationary cupboards
Specification for wooden folding chairs
Specification for metal book ends
Specification for steel glass-front cabinets
Specification for steel book cases
IS 7070
IS 7259 : Part 1
IS 8126
IS 8467
IS 8761
IS 9236
IS 9715
IS 11525
IS 11679
IS 12674 : Part 1
IS 12674 : Part 2
IS 12680
IS 13089
IS 13713
IS 13896
IS 1641
IS 1642
IS 1643
IS 3808
IS 3809
IS 12349
IS 1644
IS 1646
IS 2726
IS 3058
IS 3079
Specification for wooden shelving racks (adjustable
type and non_adjustasble)
Specification for wooden beds:Part 1 for use with
mattresses
Composite office tables
Specification for steel card-index cabinets
Specification for steel folding cots
Specification for metal letter-rests
Specification for steel visible indexing system
cabinets
Specification for wooden chairs for office purposes
Specification for wooden tables for office purposes
Methods of test for strength and stability of settees
and benches Part 1 Strength
Methods of test for strength and stability of settees
and benches Part 2 Stability
Specification for wooden sofa-cum-bed
Specification for furniture - storage units determination of stability
Specification for plastic chairs for general office
purposes
Specification for machine operators table and
display unit (VDU) table
Code of practice for fire safety of buildings
(general): General principles of fire grading and
classification
Code of practice for fire safety of buildings
(general): Details of construction
Code of practice for fire safety of buildings
(general): Exposure hazard
Method of test for non-combustibility of building
materials
Fire resistance test for structures
Fire protection-safety signs
Code of practice for fire safety of buildings
(general): Exit requirements and personal hazard
Code of practice for fire safety of buildings
(general): Electrical installations
Code of practice for fire safety of industrial
buildings: Cotton ginning and pressing (including
cotton seed delintering)factories
Code of practice for fire safety of industrial
buildings: Viscose rayon yarn and/or staple fibre
plants
Code of practice for fire safety of industrial
IS 3594
IS 3595
IS 3614 : Part 2
IS 4226
IS 4886
IS 6329
IS 8758
IS 11457 : Part 1
IS 12407
IS 12458
IS 13694
IS 13716
IS 11460
IS 12456
IS 13045
IS 14435
IS 875 : Part 1
IS 875 : Part 2
IS 875 : Part 4
IS 875 : Part 5
buildings: Cotton textile mills
Code of practice for fire safety of industrial
buildings:General storage and warhousing including
cold storage
Code of practice for fire safety of industrial
buildings: Coal pulverizers and associated
equipments
Specification for metallic and non-metallic fire
check doors - Resistance test and performance
criteria
Code of practice for fire safety of industrial
building: Aluminium/Magnesium powder factories
Code of practice for fire safety of industrial
buildings: Tea factories
Code of practice for fire safety of industrial
buildings: Saw mills and wood works
Recommendations for fire precautionary measures in
the construction of temporary structures and pandals
Code of practice for fire safety of chemical
industries: Part 1 Rubber and plastic
Graphic symbols for fire protection plans
Method of test for fire resitance test of fire stops
Code of practice for fire safety in iron and steel
industries
Code of practice for fire safety of hotels
Code of practice for fire safety of libraries and
archives buildings
Code of practice for fire protection of electronic data
processing installation
Code of practice for fire safety in industrial
buildings: Floor mills
Code of practice for fire safety in educational
institutions
Code of practice for design loads (other than
earthquake)for buildings and structures Part 1 Dead
loads - Unit weights of building material and stored
materials (Incorporating IS:1911-1967)
Code of practice for design loads (other than
earthquake) for buildings and structurres: Part 2
Imposed loads
Code of practice for design loads (other than
earthquake) for buildings and structures Part 4 Snow
loads
Code of practice for design loads (other than
earthquake) for buildings and structures Part 5
Special loads and load combinations
IS 2210
IS 3935
IS 4090
IS 4995 : Part 1
IS 4998 : Part 1
IS 11682
IS 12303
IS 1893
IS 11504
IS 4326
IS 4967
IS 4991
IS 6922
IS 13827
IS 13828
IS 13920
IS 13935
IS 6279
IS 6280
IS 7090
IS 7208
IS 7232
IS 8413 : Part 1
IS 8413 : Part 2
IS 8419 : Part 1
IS 10595
Criteria for design of reinforced concrete shell
structures and folded plates
Code of practice for composite construction
Criteria for design of reinforced concrete arches
Criteria for design of reinforced concrete bins for
storage of granular and powdery materials: Part 1
General requirements and assessment of bin loads
Criteria for design of reinforced concrete chimneys:
Part 1 Assessment of loads
Criteria for design of RCC staging for overhead
water tanks
Criteria for design of RCC hinges
Criteria for earthquake resistant design of structures
Criteria for structural design of reinforced concrete
natural draught cooling towers
Code of practice for earthquake resistant design and
construction of buildings
Recommendations for seismic instrumentation for
river valley projects
Criteria for blast resistant design of structrues for
explosions above ground
Criteria for safety and design of structures subject to
underground blasts
Improving earthquake resistance of earthen
buildings - Guidelines
Improving earthquake resistance of low strength
masonary buildings - Guidelines
Ductile detailing of reinforced concrete structures
subjected to seismic forces - Code of practice
Guidelines for repair and seismic strengthening of
buildings
Specification for equipment for grit removal devices
Specification for sewage screens
Guidelines for rapid mixing devices
Guidelines for flocculator devices
Method for imhoff cone test
Requirements for biological treatment equipment:
Part 1 Trickling filters
Requirements for biological treatment end
equipment: Part 2 Activated sludge procss and its
modifications
Requirements for filtration equipment : Part 1
Filtration media - sand and gravel
Requirements for power driven bucket-type sewer
cleaning machine
IS 11117
IS 11387
IS 8419 : Part 2
IS 9222 : Part 1
IS 10037 : Part 1
IS 10037 : Part 2
IS 10037 : Part 3
IS 10053
IS 10261
IS 10313
IS 10552
IS 10553 : Part 1
IS 10553 : Part 2
IS 10553 : Part 4
IS 10553 : Part 5
IS 11931
IS 1322
IS 11397
IS 11401 : Part 1
IS 11401 : Part 2
IS 11972
IS 13166
Requirements for power driven rodding machine for
sewers
Requirements for high pressure jetting machine for
sewer cleaning
Requirements for rapid sand gravity filtration
equipment: Part 2 Under drainage system
Recommendation for handling and dosing devices
for chemicals for water treatment: Part I Coagulants
Requirements for sludge dewatering equipment: Part
I Sludge drying beds-sand, gravel and underdrains
Requirements for sludge de-watering equipment:
Part 2 Vacuum filtration equipment
Requirements for sludge de-watering equipment:
Part 3 Centrifugal equipment (Solid bowl type)
Requirements for equipment for jackson candle
turbiditimeter and determination of turbidity
Requirements for settling tank (clarifier equipment)
for waste water treatment
Requirements for settling tank (clarifier equipment)
for water treatment plant
Specification for buckets to be used in power driven
bucket type sewer cleaning machine
Requirements for chlorination equipment: Part I
General guidelines for chlorination plants including
handling, storage and safety of chlorine cylinders
and drums
Requirements for chlorination equipment: Part 2
Vacuum feed type chlorinators
Requirements for chlorination equipment: Part 4
Gravity feed type gaseous chlorinators
Requirements of chlorination equipment: Part 5
Bleaching powder solution feeder displacement type
chlorinator
Specification for sewer cleaning metal rods
Specification for bitumen felts for water proofing
and damp-proofing
Specification for attachment tools for power driven
rodding machine for sewers
Requirements for slow sand filters: Part 1 General
guidelines
General requirements for slow sand filters Part 2
Design, construction, operation and maintenance
Code of practice for safety precautions to be taken
when entering a sewerage system
Guidelines for evaluation and testing of mechanical
surface aerators
IS 13496
IS 1580
IS 1609
IS 3036
IS 3037
IS 3067
IS 3384
IS 4365
IS 4911
IS 5871
IS 7193
IS 7198
IS 12027
IS 6494
IS 7290
IS 9918
IS 12054
IS 13435 : Part 1
IS 13435 : Part 3
IS 13435 : Part 4
IS 13435 : Part 5
General requirements of suction machine for
cleaning sewers, manholes and ancillary structures
provided on sewer line and closed storm water
drains
Specification for bituminous compound for waterproofing and caulking purposes
Code of practice for laying damp-proofing treatment
using bitumen felts
Code of practice for laying lime concrete for a
waterproofed roof finish
Specification for bitumen mastic for use in waterproofing of roofs
Code of practice for general design details and
preparatory work for damp-proofing and waterproofing of buildings
Specification for bitumen primer for use in
waterproofing and damp-proofing
Code of practice for application of bitumen mastic
for waterproofing of roofs
Glossary of terms relating to bituminous
waterproofing and damp-proofing of buildings
Specification for bitumen mastic for tanking and
damp-proofing_
Specification for glass fibre base bitumen felts
Code of practice for damp-proofing using bitumen
mastic
Specification for silicone-based water repellents
Code of practice for water-proofing of underground
water reservoirs and swimming pools
Recommendations for use of polyethylene film for
water-proofing of roofs
Code of practice for in-situ waterproofing and dampproofing treatments with glass fibre tissue reinforced
bitumen
Code of practicie for application of silicon based
water repellent
Acrylic based waterproofinng material - Method of
tests Part 1 Determination of solid content
Acrylic based polymer waterproofing material Methods of test Part 3 Determination of capillary
water take-up
Acrylic based polymer waterproofing material Methods of test Part 4 Determination of pH value
Acrylic based waterproofing material - Methods of
test Part 5 Determination of minimum film forming
temperature and white point
IS 13826 : Part 1
IS 13826 : Part 2
IS 13826 : Part 3
IS 13826 : Part 4
IS 13826 : Part 5
IS 13826 : Part 6
IS 5249
IS 9556
IS 9716
IS 13826 : Part 7
IS 1080
IS 1904
IS 2911 : Part 1 :
Sec 1
IS 2911 : Part 1 :
Sec 2
IS 2911 : Part 1 :
Sec 3
IS 2911 : Part 1 :
Sec 4
IS 2911 : Part 2
IS 2911 : Part 3
IS 2911 : Part 4
IS 2974 : Part 2
IS 9759
Bitumen based felts - Method of test Part 1 Breaking
strenth test
Bitumen based felts - Methods of test Part 2
Pliability test
Bitumen based felts - Methods of test Part 3 Storage
sticking test
Bitumen based felts - Method of test Part 4 Pressure
head test
Bitumen based felts - Methods of test Part 5 Heat
resistance test
Bitumen based felts - Methods of test Part 6 Water
absorption test
Method of test for determination of dynamic
properties of soil
Code of practice for design and construction of
diaphragm walls
Guide for lateral dynamic load test on piles
Bitumen based felts - Methods of test Part 7
Determination of binder content
Code of practice for design and construction of
shallow foundations om soils (other than raft, ring
and shell)
Code of practice for design and construction of
foundations in soils: general requirements
Code of practice for design and construction of pile
foundations: Part 1 Concrete piles, Section 1 Driven
cast in-situ concrete piles
Code of practice for design and construction of pile
foundations: Part 1 Concrete piles, Section 2 Bored
cast-in-situ piles
Code of practice for design and construction of pile
foundations: Part 1 Concrete piles, Section 3 Driven
precast concrete piles
Code of practice for design and construction of pile
foundations: Part 1 concrete piles, Section 4 Bored
precast concrete piles
Code of practice for desing and construction of pile
foundations: Part 2 Timber piles
Code of practice for design and construction of pile
foundations: Part 3 Under reamed piles
Code of practice for design and construction of pile
foundations: Part 4 Load test on piles
Code of practice for design and construction of
machine foundations: Part 2 Foundations for impact
type machine (hammer foundations)
Guidelines for de-watering during construction
IS 10270
IS 11089
IS 2974 : Part 3
IS 2974 : Part 4
IS 2974 : Part 5
IS 6403
IS 9456
IS 11233
IS 11550
IS 11629
IS 12023
IS 12208
IS 13094
IS 13301
SP 27
IS 3696 : Part 1
IS 3764
IS 4081
IS 1200 : Part 1
IS 1200 : Part 2
IS 1200 : Part 4
Guidelines for design and construction of
prestressed rock anchors
Code of practice for design and construction of ring
foundation
Code of practice for design and construction of
machine foundations: Part 3 Foundations for rotary
type machines (Medium and high frequency)
Code of practice for design and construction of
machine foundations: Part 4 Foundations for rotary
type machines of low frequency
Code of practice for design and construction of
machine:foundations Part 5 Foundations for impact
machines other than hammers (forging and stamping
press, pig breakers, drop crusher and jolter)
Code of practice for determination of bearing
capacity of shallow foundations
Code of practice for design and construction of
conical and hyperbolic paraboloidal types of shell
foundations
Code of practice for design and construction of radar
antenna, microwave and TV tower foundations
Code of practice for field instrumentation of
swelling pressure in expansive soils
Code of practice for installation and operation of
single point hydraulic over-flow setting gauge
Code of practice for field monitoring of movement
of structures using tape extensometer
Method for measurement of earth presure by
hydraulic presure cell
Guidelines for selection of ground improvement
techniques for foundation in weak soils
Guidelines for vibration isolation for machine
foundations
Handbook on method of measurement of buildings
works
Safety code of scaffolds and ladders: Part 1
Scaffolds
Code of safety for excavation work
Safety code for blasting and related drilling
operations
Methods of measurement of building and civil
engineering works: Part 1 Earthwork
Method of measurement of building and engineering
works: Part 2 concrete works
Method of measurement of building and civil
engineering works: Part 4 stone masonry
IS 1200 : Part 5
IS 1200 : Part 6
IS 1200 : Part 7
IS 1200 : Part 8
IS 1200 : Part 9
IS 1200 : Part 10
IS 1200 : Part 11
IS 1200 : Part 13
IS 1200 : Part 14
IS 1200 : Part 15
IS 4130
IS 4138
IS 4756
IS 1200 : Part 16
IS 1200 : Part 17
IS 1200 : Part 18
IS 1200 : Part 20
IS 1200 : Part 21
IS 1200 : Part 22
IS 1200 : Part 23
Method of measurement of building and civil
engineering works: part 5 form work
Method of measurement of building and civil
engineering works: Part 6 refractory work
Method of measurement of building and civil
engineering works: Part 7 hardware
Method of measurement of building and civil
engineering work: Part 8 steel work and iron work
Method of measurement of building and civil
engineering work: Part 9 roof covering (including
cladding)
Method of measurement of building and civil
engineering works: part 10 ceiling and linings
Method of measurement of building and civil
engineering work: Part11 paving, floor finishes dado
and skirting
Method of measurement of building and civil
engineering works: Part 13 Whitewashing, colour
washing, distampering and painting of building
surfaces
Method of measurement of building and civil
engineering works: Part 14 glazing
Method of measurement of building and civil
engineering works: Part 15 painting, polishing,
varnishing etc
Safety code for demolition of buildings
Safety code for working in compressed air
Safety code for tunneling work
Method of measurement of building and civil
engineering works: Part 16 laying of water and
sewer lines including appurtenant items
Method of measurement of building and civil
engineering works: Part 17 road work including air
field pavements
Method of measurement of building and civil
engineering works: Part 18 demolition and
dismantling
Method of measurement of building and civil
engineering works: Part 20 laying of gas and oil
pipelines
Method of measurement of building and civil
engineering works: Part 21 wood-work and joinery
Method of measurement of building and civil
engineering works: Part 22 materials
Method of measurement of building and civil
engineering works: Part 23 piling
IS 1200 : Part 24
IS 1200 : Part 25
IS 1200 : Part 26
IS 1200 : Part 27
IS 1200 : Part 28
IS 5121
IS 7293
IS 7969
IS 3861
IS 5916
IS 8989
IS 10291
IS 13416 : Part 1
IS 13416 : Part 2
IS 13416 : Part 3
IS 13416 : Part 4
IS 13416 : Part 5
IS 13430
IS 4651 : Part 1
IS 4651 : Part 2
IS 4651 : Part 4
IS 4651 : Part 5
Method of measurement of building and civil
engineering works: Part 24 well foundations
Method of measurement of building and civil
engineering works: Part 25 tunneling
Method of measurement of building and civil
engineering works: Part 26 Acid resistant lining
Method of measurement of building and civil
engineering works: Part 27 Earthwork done by
mechanical appliances
Methods of measurement of building and civil
engineering works: Part 28 Sound insulation works
Safety code for piling and other deep foundations
Safety code for working with connstruction
machinery
Safety code for handling and storage of building
materials
Method of measurement of plinth, carpet and
rentable area of buildings
Safety code for construction involving use of hot
bituminous materials
Safety code for erection of concrete framed
structures
Safety code for dress divers in civil engineering
works
Recommendations for preventive measures against
hazards at workplaces Part 1 Falling material
hazards prevention
Recommendations for preventive measures against
hazards at workplaces Part 2 Fall prevention
Recommendations for preventive measures against
hazards at workplaces Part 3 Disposal of debris
Recommendations for preventive measures against
hazards at workplaces Part 4 Timber structure
Recommendations for preventive measures against
hazards at workplaces Part 5 Fire protection
Code of practice for safety during additional
construction and alteration to existing buildings
Code of practice for planning and design of ports
and harbours: Part 1 Site investigation
Code of practice for planning and design of ports
and harbours: Part 2 Earth pressure
Code of practice for planning and design of ports
and harbours: Part 4 General design consideration
Code of practice for planning and design of ports
and harbours: Part 5 Layout and functional
requirements
IS 7314
IS 7746
IS 9527 : Part 1
IS 9527 : Part 3
IS 9527 : Part 4
IS 9527 : Part 6
IS 10020 : Part 4
IS 7317
IS 8764
IS 9143
IS 9179
IS 9221
IS 10050
IS 10082
IS 10782
IS 11309
IS 11358
IS 12608
IS 12634
IS 11315 : Part 1
IS 11315 : Part 2
IS 11315 : Part 3
IS 11315 : Part 4
Glossary of terms relating to port and harbour
engineering
Code of practice for in-situ shear test on rock
Code of practice for design and construction of port
and harbour structures: Part 1 Concrete monoliths
Code of practice for design and construction of port
and harbour structures: Part 3 Sheet pile walls
Code of practice for design and construction of port
and harbour structures: Part 4 Cellular sheet pile
structures
Code of practice for design and construction port
and harbour structures Part 6 Block work
Recommendations for design and construction of
port and harbour components: Part 4 Slipways
Code of practice for uniaxial jacking test for
deformation modulus of rock
Method of determination of point load strength
index of rocks
Method for the determination of unconfined
compressive strength of rock materials
Method for the preparation of rock specimen for
laboratory testing
Method for the determination of modulus of
elasticity and Poisson's ratio of rock materials in
uniaxial compression
Method for determination of slake durability index
of rocks
Method of test for the determination of tensile
strength by indirect tests on rock specimens
Method for laboratory determination of dynamic
modulus of rock core specimens
Method of conducting pull-out test on anchor bars
and rock bolts
Glossary of terms and symbols applicable to rock
mechanics
Methods of test for hardness of rock
Method of determination for direct shear strength of
rock joints
Method for the quantitative description of
discontinuities in rock mass: Part 1 Orientation
Mehod for the quantitative description of
discontinuities in rock mass: Part 2 Spacing
Method for the quantitative description of
discontinuities in rock mass: Part 3 Persistence
Method for the quantitative description of
discontnuities in rock mass: Part 4 Roughness
IS 11315 : Part 5
IS 11315 : Part 6
IS 11315 : Part 7
IS 11315 : Part 8
IS 11315 : Part 9
IS 11315 : Part
10
IS 11315 : Part
11
IS 12955 : Part 1
IS 9271
IS 14333
IS 13727
IS 783
IS 12955 : Part 2
IS 13030
IS 13047
IS 13063
IS 13365 : Part 1
IS 13365 : Part 2
IS 13365 : Part 3
IS 13372 : Part 1
IS 13372 : Part 2
Method for the quantitative description of
discontinuities in rock mass: Part 5 Wall strength
Mehod for the quantitative description of
discontinuities in rock mass: Part 6 Aperture
Method for the quantitative description of
discontinuities in rockmass: Part 7 Filling
Method for the quantitative description of
discontinuities in rock mass: Part 8 Seepage
Method for the quantitative description of
discontinuities in rockmass: part 9 Number of sets
Method for the quantitative description of
discontinuities in rock mass : Part 10 Block size
Method for the quantitative description of
discontinuities in rock mass: Part 11 Core recovery
and rock quality
Code of practice for in-situ determination of rock
mass deformability using a flexible dilatometer Part
1 volume change
Farm drainage plastic pipes
High density polyethylene pipe for sewerage Specification
Guide for requirements of cluster planning for
housing
Code of practice for laying of concrete pipes
Code of practice for in-siitu determination of rock
mass deformability using flexible dilatometer Part 2
Radial displacement
Method of test for laboratory determination of water
content, porosity, density and related properrties of
rock material
Method for determination of strength of rock
materials in triaxial compression
Code of practice for structural safety of buildings on
shallow foundstions on rocks
Quantitative classification system of rock mass Guidelines : Part 1 RMR for predicting of
engineering properties
Quantitative classification systems of rock massGuidelines Part 2 Rock mass quality for prediction
of support pressure in underground openings
Guidelines for classification system of rock mass
Part 3 Determination of slope mass rating (SMR)
Code of practice for seismic testing of rock mass
Part 1 within a borehole
Code of practice for seismic testing of rock mass
Part 2 Between the borehole
IS 13414
IS 13946 : Part 1
IS 13946 : Part 2
IS 1332
IS 1592
IS 2096
IS 13946 : Part 3
IS 13946 : Part 4
IS 14243 : Part 1
IS 14243 : Part 2
IS 14395
IS 14436
IS 14448
IS 14593
IS 13519
IS 13746
IS 13802
IS 4984
IS 7634 : Part 1
IS 2098
IS 2174
IS 2572
Guidelines for monitoring of rock movement and
multi-point borehole extensometers
Code of practice for in-situ determination of rock
stress Parrt 1 Using hydraulic fracturing technique
Code of practice for determination of rock stress
Part 2 Using USBM type drill hole deformation
gauge
Specification for precast reinforced concrete street
lighting poles
Specification for asbestos cement pressure pipes
Specification for asbestos cement flat sheets
Code of practice for determination of rock stress
Part 3 Using a CSIR or CSIRO type cell with 9 or 12
strain gauges
Determination of rock stress-Code of practice Part 4
Using flat jack technique
Guidelines for selection and development of site for
building in hill areas Part 1 Microzonation of urban
centres
Guidelines for selection and development of site for
building in hill areas Part 2 Selection and
development
Guidelines for monitoring of rock movements using
probe inclinometer
Method of test for laboratory determination of
resistivity on rock specimen
Code of practice for reinforcement of rock slopes
with plane edge failure
Design and construction of bored cast-in-situ piles
founded on rocks - Guidelines
Guidelines for inspection of fixed steel offshore
structures during fabrication and installation
Code of practice for geotechnical investigation of
offshore jacket structure
Guidelines for planning and execution of seabed
engineering (Geophysical) survey for offshore
platforms and pipelines
Specification for high density polyethylene pipes for
potable water supplies
Code of practice for plastic pipes work for potable
water supplies: Part 1 Choice of materials and
general recommendations
Specification for asbestos cement building boards
Specification for reinforced concrete dust bins
Code of practice for construction of hollow concrete
block masonry
IS 7634 : Part 2
IS 7634 : Part 3
IS 7834 : Part 1
IS 7834 : Part 2
IS 7834 : Part 3
IS 7834 : Part 4
IS 7834 : Part 6
IS 7834 : Part 7
IS 7834 : Part 8
IS 8008 : Part 3
IS 4996
IS 5748
IS 8008 : Part 4
IS 8008 : Part 5
IS 8008 : Part 6
IS 8008 : Part 7
Code of practice for plastics pipe work for potable
water supplies: Part 2 Laying and jointing
polyethylene (PE) pipes
Code of practice for plastics pipe work for potable
water supplies: Part 3 Laying and jointing of UPVC
pipes
Specification for injection moulded PVC fittings
with solvent cement joints for water supplies: Part 1
General requirements
Specification for injection moulded PVC fittings
with solvent cement joints for water supplies: Part 2
Specific requirements for 45 degrees elbows
Specification for injection moulded PVC socket
fittings with solvent cement joints for water
supplies: Part 3 Specific requirements for 90 degree
elbows
Specification for injection moulded PVC socket
fittings with solvent cement joints for water
supplies: Part 4 Specific requirements for 90 degree
tees
Specification for injection moulded PVC socket
fittings with solvent cement joints for water
supplies: Part 6 Specific requirements for sockets
Specification for injection moulded PVC socket
fittings with solvent cement joints for water
supplies: Part 7 Specific requirements for unions
Specification for injection moulded PVC socket
fittings with solvent cement joints for water
supplies: Part 8 Specific requirements for caps
Specification for injection moulded HDPE fittings
for potable water supplies: Part 3 Specification for
90 degree tees
Specification for reinforced concrete fence posts
Methods of test for tensile strength of asbestos fibre
Specification for injection moulded HDPE fittings
for potable water supplies: Part 4 Specific
requirements for reducers
Specification for injection moulded HDPE fittings
for potable water supplies: Part 5 Specific
requirements for ferrule reducers
Specification for injection moulded HDPE fittings
for potable water supplies: Part 6 Specific
requirements for pipe ends
Specification for injection moulded HDPE fittings
for potable water supplies: Part 7 Specific
requirements for sandwich flanges
IS 8360 : Part 1
IS 8360 : Part 2
IS 8360 : Part 3
IS 10124 : Part 1
IS 10124 : Part 2
IS 10124 : Part 3
IS 10124 : Part 4
IS 10124 : Part 5
IS 10124 : Part 6
IS 10124 : Part 7
IS 10124 : Part 8
IS 10124 : Part 9
IS 10124 : Part
10
IS 10124 : Part
11
IS 10124 : Part
12
IS 10124 : Part
13
Specification for fabricated high density
polyethylene (HDPE) fittings for potable water
supplies: Part 1 General requirements
Specification for fabricated high density
polyethylene (MDPE) fittings for potable water
supplies, Part 2 Specific requirements for 90 tees
Specification for fabricated high density
polyethylene (HDPE) fittings for potable water
supplies, Part 3 Specifc requirements for 90 bends
Specification for fabricated PVC fittings for potable
water supplies: Part I General requirements
Specification for fabricated PVC fittings for potable
water supplies: Part 2 Specific requirements for
sockets
Specification for fabricated PVC fittings for potable
water supplies: Part 3 Specific requirements for
straight reducers
Specification for fabricated PVC fittings for potable
water supplies: Part 4 Specific requirements for caps
Specification for fabricated PVC fittings for potable
water supplies: part 5 Specific requirements for
equal tees
Specification for fabricated PVC fittings for potable
water supplies: Part 6 Specific requirements for
flanged tail piece with metallic flanges
Specification for fabricated PVC fittings for potable
water supplies: Part 7 Specific requirements for
threaded adaptors
Specification for fabricated PVC fittings for potable
water supplies: Part 8 Specific requirements for 90
degree bends
Specification for fabricated PVC fittings for potable
water supplies: Part 9 Specific requirements for 60
degree bends
Specification for fabricated PVC fittings for potable
water supplies: Part 10 Specific requirements for 45
degree bends
Specification for fabricated PVC fittings for potable
water supplies: Part 11 Specific requirements for 30
dgree bends
Specification for fabricated PVC fittings for potable
water supplies: Part 12 Sspecific requirements for 22
1/2 degree bends
Specification for fabricated PVC fittings for potable
water supplies: Part 13 Specific requirements for 11
1/4 degree bends
IS 12231
IS 12709
IS 12818
IS 13592
IS 13593
IS 13916
IS 14402
IS 8888 : Part 1
IS 13990
IS 13994
IS 14142
IS 14143
IS 14201
IS 14213
IS 14215
IS 14242
IS 459
IS 1626 : Part 1
IS 1626 : Part 2
Specification for UPVC (rigid) pipes for use in
suction and delivery lines of agricultural pumps
Specification for glass-fibre reinforced plastic (GRP)
pipes joints and fittings for use for potable water
supply
Specification for unplasticized PVC screen and
casing pipes for bore/tubewell
Specification for UPVC pipes for soil and waste
discharge systems inside buiildings including
ventilation and rainwater system
Specification for UPVC pipe fittings to be used with
the UPVC pipes in the suction and delivery lines of
agricultural pumps
Code of practice for installation of glass fibre
reinforced plastic (GRP) piping system
Specification for GRP pipes joints and fittings for
sewerage, industrial waste and water (other than
potable)
Guide for requirements of low income housing Part
1 Urban area
Specification for precast reinforced concrete planks
and joist for flooring and roofing
Code of practice for design and construction of floor
and roof with precast reinforced concrete planks and
RC joist
Code of practice for design and construction of
floors and roofs with prefabricated brick panel
Specification for prefabricated brick panel and
partially precast concrete joist for flooring and
roofing
Specification for precast reinforced concrete channel
unit for construction of floors and roofs
Code or practice for construction of walls using
precast concrete stone masonry blocks
Code of practice for construction of floor and roof
with RC channel units
Code of practice for design and construction of roof
with L-Panel units
Specification for unreinforced corrugated and semicorrugated asbestos cement sheets
Specification for asbestos cement building pipes and
pipe fittings, gutters and gutter fittings and roofing
fittings Part 1 Pipe and pipe fittings
Specification for asbestos cement building pipes and
pipe fittings, gutters and gutter fittings and roofing
fittings Part 2 Gutter and gutter fittings )
IS 1626 : Part 3
IS 1678
IS 1916
IS 2185 : Part 2
IS 2185 : Part 3
IS 2905
IS 3597
IS 3632
IS 4350
IS 4844
IS 5328
IS 5820
IS 5913
IS 6041
IS 6042
IS 6072
IS 6073
IS 6441 : Part 1
IS 6441 : Part 6
IS 6441 : Part 7
Specification for asbestos cement building pipes and
pipe fitting, gutters and gutter fittings and roofing
fittings: Part 3 Roofing accessories
Specification for prestressed concrete poles for
overhead power, traction and telecommunication
lines
Specification for steel cylinder pipe with concrete
lining and coating
Specification for concrete masonry units: Part 2
Hollow and solid light weight concrete blocks
(superseding IS:3590)
Specification for concrete masonry units Part 3
Autoclaved cellular Aerated concrete blocks
(Superseding IS:5482)
Methods of test for concrete poles for overhead
power and telecommunication lines
Methods of test for concrete pipes
Method of test for determination of wet volume of
asbestos fibre
Specification for concrete porous pipes for underdrainage
Method of sampling and preparation of asbestos for
laboratory test purposes
Method of test for determination of chemical
composition of asbestos fibre
Specification for precast concrete cable cover
Methods of test for asbestos cement products
Code of practice for construction of autoclaved
cellular concrete block masonry
Code of practice for construction of lightweight
concrete block masonry
Specification for autoclaved reinforced cellular
concrete wall slabs
Specification for autoclaved reinforced cellular
concrete floor and roof slabs
Methods of test for autoclaved cellular concrete
products: Part I Determination of unit weight or bulk
density and moisture content
Methods of test for autoclaved cellular concrete
products: Part VI Strength, deformation and
cracking of flexural members subjects to bending,
short duration loading test
Methods of test for autoclaved cellular concrete
products: Part VII Strength, deformation and
cracking of flexural members subject to bending
sustained loading test
IS 6441 : Part 9
IS 6530
IS 7319
IS 7639
IS 9375
IS 9627
IS 6908
IS 7321
IS 7322
IS 9690
IS 9691
IS 9745
IS 9872
IS 9893
IS 11267
IS 11275
IS 11276
IS 11707
IS 11767
IS 11768
IS 12079
IS 12440
Methods of test for autoclaved cellular concrete
products: Part IX Jointing of autoclaved cellular
concrete elements
Code of practice for laying of asbestos cement
pressure pipes
Specification for perforated concrete pipes
Methods of sampling of asbestos cement products
Specification for precast reinforced concrete plant
guards
Specification for asbestos cement pressure pipes
(light duty)
Specification for asbestos cement pipes and fittings
for sewerage and drainage
Code of practice for selection, handling and erection
of concrete poles for overhead power and
telecommunication lines
Specification for specials for steel cylinder
reinforced concrete pipes
Method of test for determination of openness or
fibrization of chrysotile asbestos fibre by air
permeability method using Dyckerhoff apparatus
Method of test for length distribution (wet
classification of fibre length) of chrysotile asbestos
fibre using Bauer Mcnett classifier
Method for determining strength giving properties of
asbestos fibre
Specification for precast concrete septic tanks
Specification for precast concrete blocks for lintels
and sills
Method of test for length distribution (wet
classification of fibre length) of chrysotile asbestos
fibre using Turner and Newall classifier
Method of test for determination of crudiness and
grit content of asbestos fibre
Method of test for determination of openness or
fiberization of chrysotile asbestos fibre by air
permeability method using rapid surface area
apparatus
Glossary of terms relating to asbestos
Recommendations for cleaning of premises and
plants using asbestos fibres
Recommendations for disposal of asbestos waste
material
Recommendations for packaging, transport and
storage of asbestos
Specification for precast concrete stone masonry
IS 13008
IS 11769 : Part 1
IS 11769 : Part 2
IS 11769 : Part 3
IS 11770 : Part 1
IS 11770 : Part 2
IS 11770 : Part 3
IS 12078
IS 12080
IS 12081 : Part 1
IS 12082 : Part 1
IS 12592 : Part 2
IS 6003
IS 13620
IS 460 : Part 1
IS 13158
IS 13356
IS 432 : Part 1
blocks
Specification for shallow corrugated asbestos
cement sheets
Guidelines for safe use of products containing
asbestos: Part 1 Asbestos cement products
Guidelines for safe use of products containing
asbestos: Part 2 Friction materials
Guidelines for safe use of products containing
asbestos: Part 3 Non-cement asbestos products other
than friction materials
Recommendations for control of emission of
asbestos dust in premises manufacturing products
containing asbestos: Part 1 Asbestos cement
products
Recommendations for control of emission of
asbestos dust in premises manufacturing products
containing asbestos: Part 2 Friction materials
Recommendations for control of emission of
asbestos dust in premises manufacturing products
containing asbestos: Part 3 Non-cement asbestos
products other than friction materials
Recommendations for personal protection of
workers engaged in handling asbestos
Recommendations for local exhaust ventilation
systems in premises manufacturing products
containing asbestos
Recommendations for pictorial warning signs and
precautionary notices for asbestos and products
containing asbestos: Part 1 Workplaces
Recommendations for control of asbestos emission:
Part 1 Mining of asbestos ore
Specification for precast concrete manhole covers
and frames: Part 2 Frames
Specification for indented wire for prestressed
concrete
Specification for fusion boned epoxy coated
reinforcing bars
Specification for test sieves: Part I Wire cloth test
sieves
Specification for prestressed concrete circular spun
poles for overhead power, traction and
telecommunication lines
Specification for precast ferrocement water tanks
(250 to 10000 litres capacity
Specification for mild steel and medium tensile steel
bars and hard-drawn steel wire for concrete
IS 432 : Part 2
IS 1785 : Part 2
IS 1786
IS 2090
IS 6006
IS 10790 : Part 1
IS 10790 : Part 2
IS 14268
IS 460 : Part 2
IS 1568
IS 1607
IS 4124
IS 5421
IS 460 : Part 3
IS 2405 : Part 1
IS 4879
IS 4961
IS 5257
IS 5258
IS 5282
IS 5742 : Part 1
IS 5742 : Part 2
IS 8425
reinforcement: Part I Mild steel and medium tensile
steel bars
Specification for mild steel and medium tensile steel
bars and hard-drawn steel wire for concrete
reinforcement: Part 2 Hard-drawn steel wire
Specification for plain hard-drawn steel wire for
prestressed concrete: Part 2 As drawn wire
Specification for high strength deformed steel bars
and wires for concrete reinforcement (superseding
IS:1139-1966)
Specification for high tensile steel bars used in
prestressed concrete
Specification for uncoated stress relieved strand for
prestressed concrete
Methods of sampling of steel for prestressed and
reinforced concrete part 1 Prestressing steel
Methods of sampling of steel for prestressed and
reinforced concrete Part 2 Reinforcing steel
Specification for uncoated stress relieved low
relaxation seven ply strand for prestressed concrete
Specification for test sieves: Part II Perforated plate
test sieves
Specification for wire cloth for general purposes
Methods for test sieving
Glossary of terms relating to powders
Glossary of terms relating to test sieves and test
sieving
Specification for test sieves: Part III Methods of
examination of apertures of test sieves
Specification for industrial sieves: Part 1 Wire cloth
sieves
Method of sub-division of gross sample of powder
used for determination of particle size
Determination of particle size of powders by air
elutriatioin methods
Specification for eyepiece and screen graticule for
determination of particle size of powders
Determination of particle size of powders by optical
microscope method
Liquid sedimentation methods for determination of
particle size of powders
Terms and symbols for sieve bottoms: Part I Woven
and welded wire screens
Terms and symbols for sieve bottoms: Part II
Perforated plates
Code of practice for determination of specific
IS 10483
IS 11578
IS 14458 : Part 1
IS 14458 : Part 2
IS 2317
IS 2362
IS 4016
IS 14458 : Part 3
IS 14496 : Part 2
IS 2316
IS 4048
IS 4284
IS 4285
IS 4542
IS 4730
IS 5194
IS 5298
IS 5305
IS 5741
IS 5762
IS 5813
IS 5949
IS 6361
IS 7017
IS 7212
IS 8769
IS 8770
surface area of powders by air permeability method
Code for designating perforations of industrial plate
sieves (identical with ISO/DIS 7806)
Method for determination of specific surface area of
powder and porous particle using low temperature
gas absorption techniques
Guidelines for retaining wall for hill area: Part 1
Selection of type of wall
Guidelines for retaining wall for hill area: Part 2
Design of retaining/breast walls
Method for gravimetric determination of sulphates
Determination of water by Karl Fischer method )
Density composition tables for aqueous solutions of
sodium hydroxide
Guidelines for retaining wall for hill area: Part 3
Construction of dry stone walls
Guidelines for preparation of landslide - Hazard
zonation maps in mountainous terrains: Part 2
Macro-zonation
Methods of preparation of standard solutions for
colorimetric and volumetric analysis
Density composition tables for aqueous solutions of
sulphuric acid
Method for volumetric determination of iron
Method for volumetric determination of calcium
Colorimetric methods for determination of iron
Methods for determination of density of liquids
Method for determination of nitrogen-Kjeldahl
method
Method for determination of distillation range and of
distillation yield
Method for volumetric determination of phosphorus
Method for determination of pH
Methods for determination of melting
temperature/range
Method for determination of crystallizing point
Methods for volumetric determination of calcium
and magnesium using EDTA
Methods of colorimetric determination of
phosphorus
Method of colorimetric determination of traces of
heavy metals by dithizone
Methods of determination of copper
Method of determination of ash and sulphated ash
Artificial sea water for laboratory use
IS 9252
IS 9497
IS 8768
IS 8883 : Part 1
IS 8883 : Part 2 :
Sec 1
IS 8883 : Part 2 :
Sec 2
IS 8883 : Part 2 :
Sec 3
IS 9189
IS 9190
IS 9506
IS 9931
IS 9958
IS 10614
IS 11123
IS 11124
IS 12041
IS 12612
IS 12816
IS 13318
IS 12042
IS 12046
IS 12074
IS 12122
Method for determination of zinc (volumetric)
Method for determination of sodium and potassium
(flame photometric)
Method of measurement of colour in liquid chemical
products in Hazen units
Methods of sampling chemicals and chemical
products : Part I General requirements and
precautions
Methods of sampling chemicals and chemical
products: Part 2 Sampling equipment - Sec 1 For
solids
Methods of sampling chemicals and chemical
products: Part 2 Sampling equipment - Sec 2 For
liquid
Methods of sampling chemicals and chemical
products: Part 2 Sampling equipment - Sec 3 For
gases
Method for determination of free chlorine in
chlorinated organic liquid compounds (colorimetric)
Methods for determination of acidity and alkalinity
in halogenated organic solvents and their admixture
Method for determination of sulphate (volumetric)
Mercurimetric method for determination of chloride
in inorganic chemicals
Atomic absorption spectrophotometric method for
determination of zinc
Method for atomic absorption spectrophotometric
determination of sodium and potassium
Method for determination of copper by atomic
absorption spectrophotometry
Method for atomic absorption spectrophotometric
determination of arsenic
Method for determination of mercury by atomic
absorption spectrophotometer
Method for colorimetric determination of tungsten
Density composition tables for aqueous solutions of
nitric acid
Spectrophotometric determination of nickel - Test
Method for determination of molybdenum by atomic
absorption spectrophotometer
Method for determination of manganese by atomic
absorption spectrophotometry
Method for determination of lead by atomic
absorption spectrophotometry
Method for determination of nickel by atomic
absorption spectrophotometry
IS 12491
IS 12845
IS 13319
IS 13320
IS 13565
IS 251
IS 252
IS 253
IS 264
IS 265
IS 266
IS 376
IS 593
IS 594
IS 646
IS 711
IS 797
IS 798
IS 799
IS 1089
IS 1113
IS 1514
IS 1540 : Part 1
IS 1540 : Part 2
IS 2142
IS 2697
IS 2723
IS 2780
IS 2797
IS 4150
IS 4408
IS 4581
IS 5301
IS 5316
IS 6614
IS 6831
IS 7129
IS 7130
Method for determination of magnesium by atomic
absorption spectrophotometry
Density composition tables for aqueous solutions of
hydrochloric acid
Determination of chromium by atomic absorption
spectrophotometry - Test method
Determination of iron by atomic absorption
spectrophotometry - Test method
Method for spectrometric determination of nitrite
Soda ash, technical - Specification
Caustic soda, pure and technical
Edible common salt
Nitric acid
Hydrochloric acid
Sulphuric acid
Sodium hydroxide, analytical reagent
Salt for hide-curing (wet salting)
Common salt for fish curing
Liquid chlorine, technical
Ferric chloride, technical
Common salt for chemical industries
Ortho-phosphoric acid
Ammonia, liquor
Oleum, technical
Ammonium chloride, technical and pure
Methods of sampling and test for quick lime and
hydrated lime
Quicklime and hydrated lime for chemical
industries: Part 1 Quick lime
Quicklime and hydrated lime for chemical
industries: Part 2 Hydrated lime
Bromine, technical
Ammonium bicarbonate for food industry
Ammonium bromide, pure and analytical reagent
Sodium bromide, pure
Potassium bromide - Specification
Potassium chloride, technical
Sodium chloride, analytical reagent
Phosphorus trichloride, pure and analytical reagent
Sodium chlorate
Ammonium carbonate - Specification
Aluminium chloride, anhydrous, technical
Caustic potash
Potassium carbonate, anhydrous
Chlorosulphonic acid, technical
IS 7163
IS 7223
IS 7541
IS 9398
IS 9825
IS 10271
IS 10332
IS 11657
IS 11673
IS 11744
IS 12981
IS 13057
IS 247
IS 248
IS 249
IS 250
IS 255
IS 256
IS 258
IS 259
IS 260
IS 261
IS 299
IS 333
IS 380
IS 381
IS 494
IS 505
IS 566
IS 567
IS 571
IS 573
IS 574
IS 877
IS 879
IS 1040
IS 1109
IS 1288
IS 1289
IS 1290
IS 1420
Potassium iodide, pure and analytical reagent
Potassium chloride, analytical reagent
Stabilized liquid sulphur trioxide
Silicon tetrachloride, technical
Chlorine tablets
Anhydrous hydrogen fluoride, technical
Hydrofluoric acid, aqueous
Phosphorus oxychloride, technical
Sodium hypochlorite solution
Phosphorus pentachloride, technical
Iron fortified common salt
Potassium iodate
Sodium sulphite, anhydrous
Sodium bisulphite, technical (sodium
metabisulphite)
Sodium bichromate, technical
Potassium bichromate, technical and analytical
reagent
Sodium sulphate, anhydrous (technical grade)
Glauber salt (sodium sulphate, decahydrate),
technical
Potash alum
Ammonium alum
Aluminium sulphate, non-ferric
Copper sulphate
Alumino-ferric
Potassium permanganate
French chalk, technical
Sodium silicate - Specifiction
Aluminium stearate for lubricants
Light kaolin - Specification
Disodium phosphate, dodecahydrate
Disodium phosphate, anhydrous
Monosodium phosphate
Trisodium phosphate
Glassy sodium metaphosphate, technical
Methods of sampling and test for activated carbons,
powdered and granular
Sodium nitrite
Calcium carbide, technical
Borax
Methods of test for mineral gypsum
Methods for sampling of mineral gypsum
Mineral gypsum
Light basic magnesium carbonate
IS 1612
IS 2449
IS 2730
IS 2752
IS 2881
IS 3204
IS 3205
IS 3401
IS 3598
IS 3605
IS 3607
IS 4200
IS 4256
IS 4505
IS 4611
IS 4737
IS 5321
IS 5877
IS 6015
IS 6100
IS 6507
IS 6655
IS 6980
IS 8325
IS 8366
IS 8587
IS 8813
IS 8814
IS 9424
IS 9700
IS 10115
IS 10116
IS 10125
IS 10535
IS 10895
IS 10896
IS 10904
IS 11112
IS 11153
IS 11224
IS 11236
IS 11237
IS 11782
IS 12008
IS 12178
Iron powder (reduction grade)
Silver oxide
Magnesium sulphate (epsom salt)
Activated carbons, granular
Barytes for chemical industry and oil-well drilling
Limestone for chemical industry
Precipitated barium carbonate, technical
Silica gel
Sodium perborate, tetrahydrate
Bauxite for chemicals and petroleum industries
Magnesite for chemical industry
Sodium aluminate
Hydrated calcium sulphate from marine brine
Sodium formaldehyde sulphoxylate
Metallic zinc powder (zinc dust)
Chromite for chemical industries
Soda lime (as carbon dioxide absorbent)
Barium sulphide, technical (black ash)
Barium hydroxide
Sodium tripolyphosphate, anhydrous, technical
Sodium chromate, technical
Methods of test for sulphur
Tetrasodium pyrophosphate, anhydrous, technical
Nickel formate for nickel catalyst
Activated carbons, powdered
Acid grade fluorspar for chemical industry
Potassium silicate, technical - Specification
Sodium metal
Sodium metasilicate
Activated alumina
Phosphorus pentasulphide
Boric acid
Copper carbonate
Manganese sulphate, monohydrate
Copper nitrate
Aluminium hydroxide, technical
Sodium fluoride, technical
Alumina, chromatographic grade
Manganese dioxide for dry batteries - Specification
Rock phosphate for chemical industries
Manganese acetate
Manganese carbonate
Sodium cyanide
Silica gel for chromatographic use
Acetylene black
IS 12292
IS 12478
IS 13425
IS 14211
IS 14212
IS 14295
IS 14305
IS 246
IS 330
IS 388
IS 500
IS 557
IS 1809
IS 1880
IS 2211
IS 2318
IS 3026
IS 4173
IS 4846
IS 4847
IS 5003
IS 5379
IS 5380
IS 5761 : Part 2
IS 6139
IS 6155
IS 6212
IS 6358
IS 6588
IS 6650
IS 7038
IS 7067
IS 8281
IS 8590
IS 8984
Lead sub oxides (lead oxide) for lead-acid storage
battery
Ammonium sulphate, technical
Ammonium nitrate for nitrous oxide production
Molecular sieves - Specification
Sodium & Potassium silicate - Method of test
Calcium flouride - Specification
Basic lead carbonate - Specification
Sodium thiosulphate, crystalline, photographic grade
Chromium trioxide
Hydroquinone, photographic grade - Specification
Potassium metabisulphite, photographic grade Specification
Sodium acetate, photographic grade
Nickel salts for electroplating
Zinc oxide and zinc salts for electroplating
Sodium thiosulphate, anhydrous, photographic grade
Silver nitrate, photographic grade
Tin salts for electroplating
4-methyl aminophenol sulphate
Sodium potassium tartrate (Rochelle salt)
Copper salts for electroplating
Cadmium oxide for electroplating
Ammonium thiosulphate, photographic grade
Sodium bromide, photographic grade
Gold cyanide and gold potassium cyanide for
electroplating : Part 2 For special applications
Sizes of black and white and colour photographic
paper in sheets for general use
Sodium carbonate, monohydrate, photographic
grade
Determination of thiosulphate and other residual
chemicals in processed photographic films, plates
and papers
Potassium and sodium cyanides for electroplating
Gold chloride (chloroauric acid)
Method for determination of residual thiosulphate
and tetrathionate in processed photographic papers
Chloroplatinic acid (Platinum chloride)
Fluoboric acid and metal fluoborates for
electroplating
Hydroxylamine sulphate, photographic grade
Indium sulphate for electroplating
Dimensions of 127, 120 and 620 roll film backing
paper and film spools
IS 9341
IS 9342
IS 9343
IS 9644
IS 9909
IS 9923
IS 9924
IS 10246
IS 10329
IS 10396
IS 10419
IS 10438
IS 10472
IS 10668
IS 10982
IS 11484
IS 11603
IS 11751
IS 11752
IS 11788
IS 12121
IS 12125
IS 12201
IS 12495
IS 12496
IS 12517
IS 12519
IS 12533
IS 12551
IS 12557
IS 12846
IS 12865
IS 12875
IS 12925
IS 13014
IS 13075
IS 13104
Sulphamic acid for electroplating
Sodium hypophosphite for electroless plating
1-phenyl-3-pyrazolidone, photographic grade
Sizes of film for medical radiography
Succinic acid for electroless plating
Palladium salts for electroplating
Rhodium salts for electroplating
N-N Diethyl-p-phenylenediamine sulphate,
photographic grade
Method for sensitometry of photographic papers
Methods for determining the curl of photographic
film
Methods for determining the brittleness of
photographic film
Potassium sulphite solution, photographic grade
Filter-aid powders for use in electroplating
Sodium formaldehyde bisulphite, anhydrous,
photographic grade
Strontium sulphate for electroplating
Phenol sulphonic acid for electroplating
Ammonium thiocyanate, photographic grade
Sodium sulphite, anhydrous, photographic grade
Sodium metabisulphite, photographic grade
4-amino-3-methyl-N-diethyl aniline hydrochloride
Sodium carbonate, anhydrous, photographic grade
Benzotriazole, photographic grade
Hydro fluosilicic acid for electroplating
Potassium ferricyanide, photographic grade
Sizes of film for industrial radiography
Sizes of photographic film for graphic arts use
Zinc pyrophosphate for electroplating
Sizes of paper in rolls for phototypesetting and
photolettering devices
Potassium pyrophosphate for electroplating
Sodium pyrophosphate for electroplating
Boric acid, photographic grade
Potassium persulphate, photographic grade
Aluminium potassium sulphate (potash alum),
photographic grade
Ferric ammonium - EDTA solution for photographic
industry
Sodium gluconate for electroplating
Sizes of rolls of black and white and colour paper
for roll paper printers
2-Amino-5-[N-ethyl N-2, hydroxy ethyl]
IS 13105
IS 13106
IS 13381
IS 13443
IS 13651
IS 307
IS 308
IS 309
IS 1090
IS 1747
IS 2432
IS 5610
IS 5760
IS 7062
IS 7278
IS 13490
IS 1446
IS 4155
IS 4263
IS 4264
IS 4312
IS 4544
IS 4560
IS 4644
IS 4906
IS 5184
IS 5208
IS 5302
IS 5311
IS 5931
IS 6156
IS 6164
IS 6269
IS 6270
IS 6818
IS 6819
IS 6953
IS 6954
aminotoluene sulphate, Photographic grade (CD-4)
2-Amino-5-[N-ethyl N-(2-methane) sulphonamido
ethyl] aminotoluene, sesqui sulphate (monohydrate),
photographic grade (CD-3)
Potassium bromide, photographic grade
Potassium carbonate, anhydrous and sesquihydrate
Methylene chloride for degreasing prior to
electroplating
1-1-1 Trichloroethane (methyl chloroform) for
electroplating
Carbon dioxide
Dissolved acetylene (gas)
Compressed Oxygen gas
Compressed hydrogen
Nitrogen
Liquid sulphur dioxide - Specification
Chlorofluoro hydrocarbons of the methane and
ethane series
Argon, compressed and liquid - Specification
Glossary of terms used in gas industry
Methyl chloride - Specification
Code of practice for handling speciality gases
Classification of dangerous goods
Glossary of terms relating to chemical and radiation
hazards and hazardous chemicals
Code of safety for chlorine
Code of safety for caustic soda
Code of safety for lead and its compounds
Code of safety for ammonia
Code of safety for nitric acid
Code of safety for benzene, toluene and xylene
Code of safety for radiochemical laboratory
Code of safety for hydrofluoric acid
Code of safety for acetic acid
Code of safety for acetic anhydride
Code of safety for carbon tetrachloride
Code of safety for handling cryogenic liquids
Code of safety for chlorosulphonic acid
Code of safety for hydrochloric acid
Code of safety for ethylene oxide
Code of safety for phenol
Code of safety for phosphoric acid
Code of safety for calcium carbide
Code of safety for bromine
Code of safety for caustic potash
IS 7415
IS 7420
IS 7444
IS 7445
IS 7812
IS 8185
IS 8388
IS 9052
IS 9053
IS 9277
IS 9278
IS 9279
IS 9744
IS 9785
IS 9786
IS 9679
IS 9787
IS 10871
IS 10872
IS 10920
IS 11141
IS 12033
IS 12034
IS 12035
IS 12141
IS 12142
IS 12143
IS 13440
IS 13441
IS 13442
IS 13447
IS 13910
IS 13911
IS 13914
IS 14165
IS 14200
IS 14518
IS 14631
IS 3521
IS 5983
IS 7524 : Part 2
IS 8091
Code of safety for aniline
Code of safety for phthalic anhydride
Code of safety for methanol
Code of safety for acetone
Code of safety for mercury
Code of safety for phosgene
Code of safety for nitrobenzene
Code of safety for aluminium chloride, anhydrous
Code of safety for m-dinitrobenzene
Code of safety for monochlorobenzene
Code of safety for zinc phosphide
Code of safety for aluminum phosphide
Code of safety for thionyl chloride
Code of safety for aluminium alkyls
Code of safety for vinyl chloride monomer (VCM)
Code of practice for work environmental monitoring
(air borne contaminants)
Code of safety for phosphoryl chloride
Code of safety for hydrazine and hydrazine hydrate
Code of safety for malathion
Code of safety for phosphorus trichloride
Code of safety for acrylonitrile
Code of safety for dinitro toluene
Code of safety for methyl bromide
Code of safety in microbiological laboratories
Code of safety for methyl ethyl ketone
Code of safety for 1,1,1 trichloro ethane
Code of safety for tetrachloroethane
Code of safety for methyl chloride
Code of safety for ethyl ether
Code of safety for trichloro ethylene
Code of safety for p-nitroaniline
Code of safety for sulphur dioxide
Code of safety for sulphur
Code of safety for perchlorates of ammonium,
potassium and sodium
Handling of carcinogenic substances - code of safety
Code of safety for hydrogen peroxide
Acetyaldehyde - Code of Safety
Styrene - Code of safety
Industrial safety belts and harnesses - Speciification
Eye-protectors
Methods of test for eye protectors: Part 2 Optical
tests
Code of practice for industrial plant layout
IS 3786
IS 6994 : Part 1
IS 7524 : Part 1
IS 8089
IS 8218 : Part 1
IS 8218 : Part 2
IS 8318
IS 8519
IS 8520
IS 8521 : Part 1
IS 8521 : Part 2
IS 8522
IS 8523
IS 8807
IS 8940
IS 8990
IS 9457
IS 9473
IS 9563
IS 9937
IS 9623
IS 10224
IS 10245 : Part 1
IS 10245 : Part 2
IS 10245 : Part 3
Methods for computation of frequency and severity
rates for industrial injuries and classification of
industrial accidents
Specification for safety gloves Part 1 Leather and
cotton gloves
Methods of test for eye protectors: Part 1 Nonoptical tests
Code of safe practice for layout of outside facilities
in an industrial plant
Safety code for plant railways Part 1 Layout
Safety code for plant railways Part 2 Locomotives,
wagons and their movements
Colour identification markings for air purifying
canisters and cartridges
Guide for selection of industrial safety equipment
for body protection
Guide for selection of industrial safety equipment
for eye, face and ear protection
Industrial safety face shields Part 1 With plastic
visor
Industrial safety face-shields : Part 2 With wire
mesh visor
Respirators, chemical cartridge
Respirators, canister type (gas masks)
Guide for selection of industrial safety equipment
for protection of arms and hands
Code of practice for maintenance and care of
industrial safety equipment for eyes and face
protection
Code of practice for maintenance and care of
industrial safety clothing
Safety colours and safety signs
Filter type particulate matter respirators
Carbon monoxide filter self-rescuers
Portable methanometer (Electrical type)
Recommendations for the selection, use and
maintenance of respiratory protective devices
Ergonomic principles in the design of work systems
Breathing apparatus Part 1 Closed circuit breathing
apparatus (compressed oxygen cylinder) Specification
Specification for breathing apparatus Part 2 Open
circuit breathing apparatus
Specification for breathing apparatus Part 3 Fresh air
hose and compressed air line breathing apparatus
IS 10245 : Part 4
IS 10592
IS 10667
IS 13293
IS 13366
IS 14138 : Part 1
IS 14138 : Part 2
IS 14166
IS 14170
IS 14489
IS 2333
IS 2781
IS 2838
IS 2717
IS 2839
IS 2840
IS 2857
IS 3149
IS 3505
IS 3972
IS 3972 : Part 1 :
Sec 1
IS 3972 : Part 1 :
Sec 2
IS 3972 : Part 2 :
Sec 2
IS 3972 : Part 2 :
Sec 3
IS 3972 : Part 2 :
Specification for breathing apparatus Part 4 Escape
breathing apparatus (short_duration self-contained
type)
Specification for industrial emergency showers, eye
and face fountains and combination units
Guide for selection for industrial safety equipment
for protection of foot and leg
Gas detector tubes - General requirements and
Methods of test
Resuscitators intended for use with humans Specification
Respiratory protective devices, Part 1 Standard
thread connection - Specification
Respiratory Protective devices: Threads for
facepieces Part 2 Centre thread connection Specification
Respiratory protective devices : Full face masks Specification
Respiratory protective devices : Mouthpiece
assemblies - Specification
Code of practice on occupational safety and health
audit
Plaster of paris for ceramic industry
Glossary of terms relating to ceramicware
Stoneware containers for general purposes
Glossary of terms relating to vitreous enamelware
and ceramic-metal systems
Industrial stoneware
China clay for ceramic industry
Earthenware crockeryware
Enamelware for home use
Porcelain crockeryware
Methods of test for vitreous enamelware
Methods of test for vitreous enamelware: Part 1
Production of specimens for testing, Section 1
Enamelled sheet steel
Methods of test for vitreous enamelware: Part 1
Production of specimens for testing, Section 2
Enamelled cast iron
Methods of test for vitreous enamelware: Part 2 Test
methods, Section 2 Low and high voltage tests for
detecting and locating defects
Methods of test for vitreous enamelware : Part 2
Test methods, Section 3 Resistance to boiling water
and water vapour
Methods of test for vitreous enamelware : Part 2
Sec 4
IS 3972 : Part 2 :
Sec 5
IS 3972 : Part 2 :
Sec 6
IS 3972 : Part 2 :
Sec 7
IS 4589
IS 6988
IS 3972 : Part 2 :
Sec 8
IS 3972 : Part 2 :
Sec 9
IS 3972 : Part 2 :
Sec 11
IS 3972 : Part 2 :
Sec 12
IS 7087
IS 7402
IS 7775
IS 8017
IS 8687 : Part 1
IS 8687 : Part 2
IS 8709
IS 9749
IS 9806
IS 10429
IS 11464
IS 11475
IS 11477
IS 11643
IS 12621
IS 12928
Test methods, Section 4 Resistance to thermal shock
Methods of test for vitreous enamelware : Part 2
Test methods, Section 5 Resistance to hot alkali
(sodium hydroxide)
Methods of test for vitreous enamelware : Part 2
Test methods, Section 6 Reflectance and specular
gloss
Methods of test for vitreous enamelware: Part 2 Test
methods Section 7 Resistance to boiling
hydrochloric acid
Plastic clay and washed plastic clay for ceramic
industry
Fine (Bone)china crockeryware
Methods of test for vitreous enamelware: Part 2 Test
methods Section 8 Resistance to heat
Methods of test for vitreous enamelware: Part 2 Test
methods - Section 9 Resistance to dilute sulphuric
acid
Methods of test for vitreous enamelware: Part 2 Test
method - Section 11 Resistance to abrasion
Methods of test for vitreous enamelware: Part 2 Test
methods - Section 12 Resistance to torsion
Ceramic tower packings
Filters for drinking water purposes
Ceramic grinding media and lining
Vitreous enamelled reflectors for use with
illuminating device
Methods of test for vitreous enamels and frits: Part 1
Sieve analysis
Methods of test for vitreous enamels and frits: Part 2
Fusion flow test
Method of test for colour retention of vitreous
enamel coatings
Potash feldspar for glass and pottery
Method of test for and permissible limits of toxic
materials released from ceramicware in contact with
food
Powdered talc for ceramic industry
Quartz for ceramic industry
Stoneware crockeryware
Pyrophyllite for ceramic industry
Silicon carbide for bonded abrasive products
Bentonite for ceramic industry
Precipitated barium carbonate for ceramic and glass
industry
IS 13273
IS 12038
IS 14179
IS 1106
IS 1107
IS 1112 : Part 1
IS 1112 : Part 2
IS 1116
IS 1382
IS 1392
IS 1662
IS 1922
IS 1945
IS 1961
IS 1975
IS 2091
IS 2303 : Part 1 :
Sec 1
IS 2303 : Part 1 :
Sec 2
IS 2303 : Part 2
IS 2351
IS 2553 : Part 1
IS 2553 : Part 2
IS 2835
IS 3438
IS 3702
IS 5081
IS 5168
IS 5437
IS 5623
IS 5715
IS 5984
Vitreous enamelled inner tanks for storage water
heater
Permissible limits and test methods for toxic
materials released from enamelware in contact with
food
Methods of test for ceramic tableware
Distilled water glass bottles
Aerated water glass bottles, crown finish type
Glass shells for general lighting service lamps Part 1
- 60 to 80 mm shell diameter
Glass shells for general lighting service lamps Part 2
- 81 to 130 mm shell diameter
Glass globes for hurricane lanterns
Glossary of terms relating to glass and glassware
Glass milk bottles
Glass liquor bottles
Liquid gold, bright
Glass bottles for fluid inks
Glass tableware
Signal roundels and lenses for use in railways
Multi-trip glass beer bottles
Grading glass alkalinity Part 1 Hydrolytic
ressistance Sec 1 Hydrolytic resistance of glass
grains at 98 deg C - Methof of test and classification
Grading glass for alkalinity part 1 Hydrolytic
resistance Section 2 Hydrolytic resistance of glass
grains at 121 deg C - Method of test and
classification
Grading glass alkalinity Part 2 Hydrolytic resistance
of glass containers
Marble stoppered aerated water glass bottles
Safety glass Part 1 General purpose
Safety glass: Part 2 Road transport
Flat transparent sheet glass
Silvered glass mirrors for general purposes specification
Refills for vacuum flasks
Glass tubes for tubular fluorescent lamps for general
lighting services lamps
Glass feeding bottles
Figured rolled and wired glass
Method for determination of coefficient of linear
thermal expansion of glass
Glass carboys
Glass shells for miniature lamps - Specification
IS 6506
IS 6654
IS 6917
IS 6945
IS 6981
IS 7511 : Part 2
IS 7511 : Part 3
IS 7511 : Part 4
IS 7511 : Part 5
IS 7511 : Part 6
IS 7511 : Part 7
IS 7511 : Part 8
IS 7511 : Part 9
IS 7511 : Part 10
IS 7708
IS 8697
IS 9153
IS 9154
IS 9157
IS 9425
IS 9780
IS 9781
IS 10133
IS 10497
IS 10516
IS 11369
IS 11539
IS 11930
IS 11984
IS 11985
IS 12581
IS 12868
IS 12869 : Part 2
Methods for thermal shock tests on glassware
Glossary of terms relating to glass containers
Glass lenses for automobile headlights (replaceable
bulb type)
Code of practice for packaging glass and glassware
Glass jars for air-depolarized primary (caustic soda)
wet cells
Part 2 Shallow continuous thread finish for deep
screw caps (R 3/D)
Part 3 Roll-on thread non-pilfer-proof (RONPP)
Part 4 Roll-on sealed threads pilfer-proof
Part 5 Vial goldie seal glass finishes
Part 6 Dual neck finish
Part 7 Crown finish
Part 8 Vacuum lug finish
Part 9 28mm roll on finishes for pressurised liquids
Part 10 Continuous screw thread for use with plastic
cap
Vacuum flasks
Code of practice for export packaging of glass
containers ware
Methods of polariscopic examination of glassware
Methods of determination of alkali resistance of
glass
Sodium nitrate and potassium nitrate for glass
compositions
Selenium for glass compositions
Glass bottles for tomato ketchup
Glass jar for jams, jellies and marmalades
Glass bottles-dimensional relationships and
tolerances
Methods of test for determination of brimful
capacity of glass containers by gravimetric method
Methods of test for internal pressure resistance for
glass containers
Glass honey jars
Method of vertical load test for glass containers
Methods of thermal shock test for glass containers
Glass bottles for free flowing liquids
Glass jars for pickles
Glass containers for domestic fruit preserving
Glass aerosol containers
Methods for determination of viscosity and
viscometric fixed points of glass: Part 2
Determination of softening point
IS 12869 : Part 3
IS 13650
IS 878
IS 915
IS 1117
IS 1381 : Part 2
IS 1388
IS 1541
IS 1574
IS 1575
IS 1590
IS 1672
IS 1996
IS 1997
IS 2480 : Part 1
IS 2480 : Part 2
IS 2618
IS 2619
IS 2620
IS 2626
IS 2627
IS 2836
IS 2837 : Part 1
IS 2837 : Part 2
IS 3104 : Part 1
IS 3432
IS 3608 : Part 1
IS 3608 : Part 2
IS 3936
IS 3953
IS 3990
IS 4161
IS 4162 : Part 4
IS 4426
IS 4610
Methods for determination of viscosity and
viscometric fixed points of glass: Part 3
Determination of annealing and strain point by beam
bending method
Glass containers for proteinized food
Graduated measuring cylinders
One-mark volumetric flasks
One-mark pipettes
Boiling flasks: Part 2 Flasks with conical ground
socket
Reagent bottles
Glass filter funnels
Glass weighing bottles
Separating funnels
Glass filter flasks
Floating dairy thermometers
Glass stopcocks
Burettes
General purpose glass thermometers: Part 1 Solid
stem thermometers
General purpose glass thermometers: Part 2
Enclosed scale thermometers
Glass test tube
Glass beakers
Distilling flasks
Petri dishes
Glossary of terms relating to liquid-in-glass
thermometers
Methods of test and quality requirements for
porcelain, laboratory apparatus
Porcelain crucibles and basins: Part 1 Crucibles
Porcelain crucibles and basins: Part 2 Basins
Density hydrometers: Part I Requirements
Clay pipe triangles
Glass alcoholometers: Part 1 Glass alcoholometers
without thermometers
Glass alcoholometers: Part 2 Glass alcoholometers
with thermometer
Porcelain mortars and pestles
High temperature ceramic combustion boats
High temperature ceramic combustion tubes
Nessler cylinders
Graduated pipettes: Part 4 Blow-out pipettes
Methods of sampling laboratory glassware
Glass tubes for general purpose and reference
IS 4162 : Part 3
IS 5011
IS 5165
IS 5681
IS 5717
IS 5725
IS 6017
IS 6052
IS 6128
IS 6154
IS 6500
IS 6592
IS 7324
IS 7374
IS 8728
IS 8729
IS 8787
IS 9213
IS 9621
IS 10072
IS 10073
IS 10231
IS 10640
IS 11468
IS 11990
IS 12244 : Part 1
IS 12255
IS 12950
IS 11469
IS 12244 : Part 2
IS 12305
IS 12580 : Part 1
thermometers
Graduated pipettes: Part 3 Pipettes for which a
waiting time of 15 s is specified
Gooch crucibles
Interchangeable conical ground-glass joints
General meteorological thermometers, liquid-inglass
Pyknometers
Psychrometers, unventilated (dry and wet bulb
hygrometers)
Thermometer for whirling psychrometers
Glass condensers
Desiccators
Perforated plates for desiccators
Thermometers for measurement of sea surface
temperatures
Soil thermometers
Brix hydrometers
Glass rods and tubing for laboratory glassware
Adjustable range thermometers
Principles of construction and adjustment of
volumetric glassware
Principles of design, construction and use of liquidin-glass thermometers
BOD bottles
Principles of construction and adjustment of glass
hydrometers
Plastics beakers
Plastics graduated measuring cylinders
Plastics filter funnels
Soxhlet extractors
Colour coding for pipettes
Gas washing bottle
Colorimeter thermometers: Part 1 Solid-stem
thermometers
Baume hydrometers
Battery hydrometer portable syringe type for leadacid batteries
Method for assessing chemical resistance of enamels
used for colour coding and colour marking
Colorimeter thermometers: Part 2 Enclosed scale
thermometers
Laboratory sintered (fritted) filters, porosity grading,
classification and designation
Glass thermometers for precision use: Part 1 Solid-
IS 12580 : Part 2
IS 1622
IS 2488 : Part 5
IS 3025 : Part 1
IS 3025 : Part 3
IS 3025 : Part 5
IS 3025 : Part 6
IS 3025 : Part 7
IS 3025 : Part 8
IS 3550
IS 4733
IS 7967
IS 8073
IS 3025 : Part 9
IS 3025 : Part 10
IS 3025 : Part 11
IS 3025 : Part 12
IS 3025 : Part 13
stem thermometers
Glass thermometers for precision use: Part 2
Enclosed-scale thermometers
Methods of sampling and microbiological
examination of water
Methods of sampling and test for industrial
effluents, Part V
Methods of sampling and test (physical and
chemical) for water and wastewater Part 1 Sampling
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 3
Precision and accuracy test
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 5 Odour
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 6 Odour
threshold
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 7 Taste
threshold
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 8 Taste
rating
Methods of test for routine control for water used in
industry
Methods of sampling and test for sewage effluents
Criteria for controlling pollution of marine coastal
areas
Guide for treatment and disposal of steel plant
effluents
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 9
Temperature
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 10
Turbidity
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 11 pH
value
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 12
Density
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 13
Saturation index (with respect to calcium carbonate)
IS 3025 : Part 14
IS 3025 : Part 15
IS 3025 : Part 16
IS 3025 : Part 17
IS 3025 : Part 18
IS 8682
IS 9427
IS 9841
IS 3025 : Part 20
IS 3025 : Part 21
IS 3025 : Part 23
IS 3025 : Part 24
IS 3025 : Part 25
IS 3025 : Part 26
IS 3025 : Part 27
IS 3025 : Part 28
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 14
Specific conductance (wheatstone bridge,
conductance cell)
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 15 Total
residue (total solids-dissolved and suspended)
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 16
Filterable residue (total dissolved solids)
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 17 Nonfilterable residue (total suspended solids
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 18
Volatile and fixed residue (total filterable and nonfilterable)
Guide for treatment of effluents of dairy industry
Code of practice for operation and maintenance of
deionizing columns
Guide for treatment and disposal of effluents of
fertilizer industry
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 20
Dispersion characteristics (flow patterns)
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 21 Total
hardness
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 23
Alkalinity
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 24
Sulphates
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 25
Chlorine, demand
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 26
Chlorine, residual
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 27
Cyanide
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 28
Sulphite
IS 3025 : Part 29
IS 3025 : Part 30
IS 3025 : Part 31
IS 3025 : Part 32
IS 11490
IS 201
IS 1070
IS 3025 : Part 33
IS 3025 : Part 34
IS 3025 : Part 35
IS 3025 : Part 36
IS 3025 : Part 37
IS 3025 : Part 38
IS 3025 : Part 39
IS 3025 : Part 40
IS 3025 : Part 41
IS 3025 : Part 42
IS 3025 : Part 43
IS 3025 : Part 44
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 29
Sulphide
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 30
Bromide
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 31
Phosphorus
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 32
Chloride
Methods of radiological test for water
Quality tolerances for water for textile industry
Reagent grade water
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 33 Iodide
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 34
Nitrogen
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 35 Silica
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 36 Ozone
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 37
Arsenic
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 38
Dissolved oxygen
Methods of sampling and test (physical and
chemical) for water and waste water : Part 39 Oil
and grease
Methods of sampling and test (physical and
chemical) for water and waste water :Part 40
Calcium
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 41
Cadmium
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 42 Copper
Methods of sampling and test (physical and
chemical) for water and waste water : Part 43
Phenols
Methods of sampling and test (physical and
chemical) for water and waste water : Part 44
IS 1813
IS 2724
IS 2725
IS 3025 : Part 45
IS 3025 : Part 48
IS 3025 : Part 49
IS 6582
IS 7022 : Part 1
IS 9508
IS 9509
IS 10044
IS 10495
IS 1680
IS 2859
IS 3328
IS 3957
IS 4221
IS 4251
IS 4343
IS 4700
IS 8914
IS 10500
IS 8188
IS 10392
Biochemical Oxygen Demand
Code of practice for treatment of water for marine
boilers
Quality tolerances for water for pulp and paper
industry
Quality tolerances for water for rayonmanufacturing industry
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 45
Sodium and potassium
Methods of sampling and test (physical and
chemical) for water and wastewater : Part 48
Mercury
Methods of sampling and test (physical and
chemical) for water and wastewater - Part 49 Zinc
Bio-assay methods for evaluating acute toxicity of
industrial effluents and wastewaters
Glossary of terms relating to water, sewage and
industrial effluents, Part I
Guide for treatment and disposal of effluents of
cotton and synthetic textile industry
Guide for teatment and disposal of effluents of
viscose rayon industry
Guide for treatment and disposal of effluents of
petroleum refinery industry
Guide for treatment and disposal of effluents of
wool processing industry
Code of practice for treatment of water for low and
medium pressure land boilers
Code of practice for treatment of water for
locomotive boilers
Quality tolerances for water for swimming pools
Quality tolerances for water for ice manufacture
Quality tolerances for water for tanning industry
Quality tolerances for water for processed food
industry
Code of practice for treatment of water for high
pressure boilers
Quality tolerances for water for fermentation
industry
Quality tolerances for water for vitreous enamel
industry
Drinking water
Code of practice for treatment of water for industrial
cooling systems
Specification for feed water and boiler water for low
IS 11671
IS 11970
IS 12084
IS 12085
IS 12086
IS 12479
IS 12918
IS 13119
IS 13268
IS 13624
IS 13643
IS 13891
IS 14199
IS 393
IS 789
IS 1221
IS 1222
IS 1333
IS 1375
IS 1379
IS 1380
IS 1440
IS 1551
IS 2079
IS 2105
IS 2694
IS 3450
IS 3707
IS 4175
IS 4222
IS 4395
IS 4747
IS 5046
IS 5086
IS 5805
IS 6830
IS 6931
and medium pressure boilers
Glossary of terms relating to boiler water
Guide for condensate polishing (power plant)
Specification for morpholine
Specification for cyclohexylamine for boiler water
treatment
Specification for hydrazine hydrate
Methods for analysis of solvent systems used for
removal of water formed deposits
Guide for removal of iron from water for rural water
supply - chemical process
Ammonium bifluoride
Demineralization plant - Guidelines
Methods of sampling and analysis of water formed
deposits - Guidelines
Tests for corrosivity of solvent used for removal of
water formed deposits in plant equipment
Quality tolerances for fresh water for fish culture
Steam purity - Methods of sampling
Ink, stamp-pad
Ink, drawing, waterproof, black
Dye based fountain pen inks
Ink, duplicating, for twin cylinder rotary machines
Ink, duplicating, for single drum rotary machine
Black lead pencil
Ink marking for non-porous surfaces (with or
without stencil plates)
Ink, finger printing, black
Ink, metal stamp, black
Carbon papers for typewriter
Graphite for pencil slips
Letter press ink, black, for general purposes
School chalks, moulded, white
Carbon papers, handwriting
Refill, ball point pen
Correcting fluid
Coloured chalks, moulded
Glossary of terms relating to inks and allied
industries
Pads for rubber stamps
Letter press ink, black, book printing
Stencil paper
Ink for ball point pen refill
Offset ink, black, general black - specification
Methods of test for printing inks
IS 7771
IS 8075
IS 8100
IS 8101
IS 8277
IS 8279
IS 8642
IS 8643
IS 8744
IS 9055
IS 9056
IS 10559
IS 10560
IS 10562
IS 10584 : Part 1
IS 11306
IS 11503
IS 11992
IS 10584 : Part 2
IS 12532
IS 13206
IS 13208
IS 13209
IS 13298
IS 13299
IS 13347
IS 14163
IS 1060 : Part 1
IS 1060 : Part 2
IS 1060 : Part 3
IS 1064
IS 1774
IS 1848
IS 2483
IS 3064
IS 3302
IS 3303
IS 3338
IS 3413
IS 4645
IS 4658
Letter press halftone ink, black
Back coated carbon papers for typewriter
Water colours for students
Poster colours
Water based recorder inks
Hectographic carbon paper
Dyes for water based writing inks
Dye, methyl violet, for stamp-pad ink
Rotary letterpress newsprint ink, black
One time carbon paper
Typewriter ribbon, silk
Jotter ball point pens
Jotter ball pen refills
Sketch pen, fibre-tip
Glass marking pencils: Part 1 With wooden casing
Teleprinter ribbon, cotton
Slates writing school
Correction fluid for concealing typed errors
Glass marking pencils: Part 2 With spiral paper-form
casing
Felt pen ink
Gallic acid for ink industry
Tannic acid for ink industry
Indelible ink
Markers, fibre-tip, regulated feed
Balls for ball point pens
Clutch pencils
Web offset ink, black - Specification
Methods of sampling and test for paper and allied
products: Part 1
Methods of sampling and test for paper and allied
products: Part 2
Methods of sampling and test for paper and allied
products: Part 3
Paper sizes
Paper for permanent and semi permanent records
Writing and printing paper
Ticket board
Hand made drawing paper
Backing sheet for stencil
Match paper for match box - Specification
Sizes of correspondence envelopes
Base paper for carbon paper
Code of practice for storage of paper and board
Coated paper and board (art and chromo)
IS 4661
IS 4664
IS 5457
IS 6211
IS 6213 : Part 6
IS 6213 : Part 2
IS 6213 : Part 3
IS 6213 : Part 5
IS 6213 : Part 8
IS 6213 : Part 10
IS 6213 : Part 11
IS 6213 : Part 13
IS 6213 : Part 15
IS 6213 : Part 16
IS 6213 : Part 17
IS 6213 : Part 18
IS 6213 : Part 19
IS 6213 : Part 20
IS 6213 : Part 21
IS 6671
IS 6956
IS 8431
IS 8460
IS 9032
IS 9033
IS 10279
IS 10287
IS 10328
Glossary of terms used in paper trade and industry
Pulp board
Sizes of folders and files
Code of practice for packaging of paper and board
Methods of test for pulp: Part 6 Copper number of
pulp
Methods of test for pulp: Part 2 Determination of
freeness of pulp
Methods of test for pulp: Part 3 Determination of
alpha, beta and gamma cellulose pulp
Methods of test for pulp: Part 5 Solubility of pulp in
one percent caustic soda solution
Methods of test for pulp: Part 8 Beating, sheet
making, preparation of hand sheets and testing
Methods of test for pulp: Part 10 Determination of
kappa number
Methods of test for pulp: Part 11 Determination of
acid insoluble ash
Methods of test for pulp: Part 13 Determination of
copper
Methods of test for pulp: Part 15 Determination of
manganese
Methods of test for pulp: Part 16 Dirt count
Methods of test for pulp: Part 17 Determination of
saleable mass of pulp
Methods of test for pulp: Part 18 Determination of
chlorine consumption (degree of delignification)
Methods of test for pulp: Part 19 Determination of
alkali solubility of pulp
Methods of test for pulp: Part 20 Determination of
alkali resistance of pulp
Methods of test for pulp: Part 21 Determination of
dry matter content
Specification for germination paper
Cover paper
Tracing paper
Wrapping tissue paper
Diazo sensitized paper
Reproduction tracing paper
Overall trimmed sizes of articles of stationery that
include detachable sheets
Holes for general filing of paper
Methods of expression of dimensions and direction
of manufacture of unprocessed writing and printing
paper
IS 10380
IS 10405
IS 11080
IS 11087
IS 11091
IS 11227
IS 11687
IS 12715
IS 12765
IS 12766
IS 12780
IS 12808
IS 12810
IS 14490
IS 14661
IS 1398
IS 2617
IS 2771 : Part 1
IS 3263
IS 3962
IS 5012
IS 5134
IS 6481
IS 4006 : Part 2
IS 4006 : Part 3
IS 6615
IS 6622
IS 7063 : Part 1
IS 7063 : Part 2
IS 7063 : Part 3
IS 7063 : Part 4
IS 7149
IS 7151
Methods of test for printing ink permeation of paper
(castor oil test)
Black centered board
Method for determination of porosity of paper
Paper for magnetic ink character recognition cheque
printing
Method of test for degree of curl of paper and degree
of sizing
Gelatin for sizing of paper
Base paper for tracing paper
Polyvinyl alcohol for sizing of paper
Map printing paper
Paper, computer - Specification
Commercial stationary forms/books
Base paper for one time carbon paper
Shorthand note books
Plain copier paper - Specification
Toilet paper - Specification
Packing paper, water-proof, bitumen laminated
Millboard, greyboard and strawboard
Fibreboard boxes: Part 1 Corrugated fibreboard
boxes
Waxed paper for confectionery
Waxed paper for general packaging
Cellulose film
Bitumen impregnated paper
Guide for principal uses and styles of fibreboard
containers
Methods of test for paper and pulp based packaging
materials : Part II
Methods of test for paper and pulp based packaging
materials: Part III
General purpose packing/wrapping paper
Grease proof paper
Methods of test for corrugated fibreboard : Part 1
Thickness of board
Methods of test for corrugated fibreboard: Part 2
Edgewise crush resistance of board
Methods of test for corrugated fibreboard : Part 3
Water resistance of glued bond by immersion
Methods of test for corrugated fibreboard : Part 4
Determination of substance of the component papers
after separation
Fibreboard boxes for canned sea foods for export
Corrugated fibreboard boxes for para-dropping of
IS 7161
IS 7162
IS 7186
IS 7601
IS 8113
IS 8970
IS 9028
IS 9042
IS 9493
IS 9588
IS 9988
IS 10066
IS 9313
IS 10176
IS 10177
IS 10528
IS 11052
IS 11324
IS 11357
IS 11761
IS 11844
IS 12212
IS 12490
IS 12999
IS 13012
IS 13228
IS 13975
IS 13976
IS 14319
IS 575
IS 576
IS 577
supplies
Vegetable parchment or grease proof
paper/aluminium foil laminate for wrapping butter
Waxed cartons for packaging of ice cream
Glossary of terms relating to paper and flexible
packaging
Fibreboard drums for general purposes
Primary cartons for packaging butter
Aluminium foil laminates for packaging
Glossary of terms relating to paper sacks
Method of measurement and expression of the
dimensions of paper sacks
Cartons for non-soapy detergents
Kraft liner
Waxed paper for bread and biscuits
Corrugated fibreboard boxes for packing cigarettes
Corrugated fibreboard boxes for the export
packaging of glass jars and bottles filled with
processed foods
Fibreboard boxes for packing soaps
Ice cream cups and lids
Method of sampling empty paper sacks for testing
Methods of test for vertical impact drop test on
paper sacks
Multi-ply paper sacks for carbon black
Composite containers for dry products
Multi-wall paper sacks for cement - Specification
Corrugated fibreboard boxes for transport packaging
of apples
Corrugated fibreboard boxes for transport packaging
of butter packed in primary cartons
Glassine paper
Folding box board, coated
Sack kraft paper and extensible sack kraft paper
Corrugated fibreboard boxes for packing and
transportation
Axial (end to end) compression strength of
composite cans, tubes and cores - Method of test
Method of end blow-off pressure test for composite
cans
Laminated paper board pack for vanaspati Specification
Chrome belt lace leather
Glazed kid for shoe uppers
Upholstery leather
IS 579
IS 580
IS 581
IS 582
IS 622
IS 1015
IS 1017
IS 1273
IS 1637
IS 1639
IS 1640
IS 2954
IS 2960
IS 2961
IS 3020
IS 3031
IS 3840
IS 3946
IS 3982
IS 3985
IS 4102
IS 4191
IS 4207
IS 4553
IS 5024
IS 5034
IS 5570
IS 5597
IS 5609
IS 5677
IS 5712
IS 5914
IS 6351
IS 6369
IS 7721
IS 7954
IS 8087
IS 7656
IS 8121
IS 8155
IS 8170
Vegetable tanned sole leather - Specification
Harness leather
Vegetable tanned hydraulic leather
Chemical testing of leather, methods of
Russet leather
Leather pump buckets made from vegetable tanned
leather
Chamois leather
Leather pump buckets made from chrome tanned
leather
Cycle saddle leather
East India tanned kips and skins
Glossary of terms relating to hides, skins and leather
Vegetable tanned leather for belting
Bookbinding leather
Chrome retan finished upper leather
Leather for oil seals
Leather cash bags
Lining leather- Specification
Leather for leg guard
Sheepskin leather for orthopaedic linings Specification
Leather for rugby ball
Leather for shuttlecock caps
Leather for volleyball
Leather for football
Leather for cricket ball
Buffalo-butt leather for knee bushings
Chromed goat skin in wet-blue conditions
Goat skins, pickled
Leather for boxing gloves
Leather for hockey ball
Shoe upper leather for direct moulding processes
Slickers for leather industry
Methods of physical testing of leather
Unhairing and scudding knife for leather industry
Fleshing knife for leather industry
Chrome tanned leather laces for heavy duty footwear
Suitcases
Briefcases
Code of practice for curing and preservation of cattle
hides and goat and sheepskins by wet salting method
Chromed buff calf skin in wet-blue condition
Portfolios
Guidelines for identification of finished leather for
IS 8517
IS 8518
IS 8863 : Part 1
IS 9155
IS 9159
IS 9160
IS 9161
IS 9426
IS 9662 : Part 1
IS 9664
IS 10845
IS 11230
IS 11749
IS 11944
IS 12435
IS 12607
IS 12623
IS 12718
IS 13307
IS 14360
IS 12659
IS 12671
IS 14361
IS 14487
IS 14575
IS 14583
IS 2716
IS 3967
IS 3968
IS 3969
IS 5127
IS 5128
IS 5465
IS 5466
IS 6199
export
Bag, air travel
Suitcase air travel
Leather sealing cups: Part 1 `U' cups
Leather for gas meter diaphragms
Guidelines for grading of raw hides and skins
Guidelines for trimming of Indian cattle hides
Guidelines for selection of finished zuggrain leather
for boot and shoe uppers
Guidelines for procurement of hides and skins
Code of practice for construction and assembly of
leather sealing cups: Part 1 `U' cups
Diameters of sealing areas for use of leather cups
Bag, pilot
Leather for utility glove
Manually operated toggle clips used in leather
industry
Wallet leather
Guidelines for grading of hides and skins on the
basis of mass and size
Guidelines for the measurement of hides and skins
in the wet blue condition
Chromed tanned cattle hides in wet-blue conditions
Performance requirements for leather for garments
Resin finished shoe uppers from goat and sheep
skins
Semichrome suede upper leather - Specification
Method of test for measurement of thickness of
surface coating on leather
Glossary of terms relating to defects in fresh or
cured hides and skins
Patent leather - Specification
Leather - Measurement of area - Guidelines
Determination of pentacholorophenol (PCP) in
leather - Method of test
Suede lining leather - Specification
Myrobalan extract
Cutch
Wattle bark
GORAN bark
BABUL bark
AVARAM bark
SONALI bark
Vegetable tanning materials, methods of test for
Wattle extract
IS 6357
IS 6657
IS 6658
IS 7742
IS 8601
IS 9004
IS 10285
IS 10286
IS 11987
IS 13022
IS 13023
IS 13024
IS 13271
IS 13527
IS 13528
IS 14488
IS 13606
IS 583
IS 1989 : Part 2
IS 2050
IS 2051
IS 2060
IS 3735
IS 3736
IS 3738
IS 3976
IS 4128
IS 4512
IS 4585
IS 5259
IS 5332
IS 5333
IS 5520
IS 5557
IS 5676
IS 5689
IS 5852
IS 6053 : Part 2
Sulphated oil for leather fat liquoring
SAL bark
CASHEW testa
Synthetic emulsion resin binders
Myrobalan nuts (whole and crushed) for tanning
industry
TAMARIND seed testa
Guide for tannin bearing plants
Bleaching syntan - Specification
Wax-emulsion for leather finishing
Enzyme bates (alkaline)
Enzyme bates (acid)
Syntan for prevention of sludge formation in
vegetable tan liquors - Specification
Syntans - Methods of test
Replacement syntans - Specification
Pretanning syntans - Specification
Sulphited fat liquors for leather-Specification
Synthetic sulphochlorinated fatliquors for leather
processing - Specification
Ankle boots for heavy duty purposes
Leather safety boots and shoes for heavy metal
industries
Glossary of terms relating to footwear
Leather footwear, methods for sampling of
Gents leather shoes
Canvas shoes, rubber sole - Specification
Canvas boots, rubber sole - Specification
Rubber boots - Specification
Safety rubber-canvas boots for miners Specification
Firemen's leather boots
Footwear lasts, wooden
Football boots
Girl's and Maids' school shoes
Boys' and youths' school shoes
Leather cricket boots
Lasts, wooden, for heavy duty boots
Industrial and safety rubber lined boots Specification
Moulded solid rubber soles and heels - Specification
Ankle derby boots
Protective steel toe caps for footwear - Specification
Handtools for footwear industry: Part 2 Bottom
cutting knife (RAMPI)
IS 6053 : Part 3
IS 6053 : Part 4
IS 6368
IS 6502
IS 6053 : Part 5
IS 6519
IS 6664
IS 6719
IS 7329
IS 7554
IS 7555
IS 7568
IS 7573
IS 8060
IS 8085 : Part 1
IS 8751 : Part 1
IS 8751 : Part 2
IS 9885 : Part 1
IS 9885 : Part 2
IS 10089
IS 10348
IS 10665
IS 10702
IS 10945
IS 11225
IS 11544
IS 12254
IS 13038
IS 11226
IS 11264
Handtools for footwear industry: Part 3 Designers'
knife
Handtools for footwear industry: Part 4 Half round
knife
Method for sampling of rubber and rubber
combination footwear
Size stick for footwear industry
Handtools for footwear industry: Part 5 Straight
hacking knife
Code of practice for selection, care and repair of
safety footwear
Micro-cellular rubber soles and heels - Specification
Solid PVC soles and heels
Metal last for safety rubber canvas ankle boots
Stiffeners
Code of practice for the manufacture of ankle boots
for general purposes
Direct moulded sole ankle boots for general
purposes
Hockey shoes
Heel tip and toe tip with nails for footwear
Footwear, method of test: Part 1 Dimensions, fitting,
adhesion test, peel test, heat resistance test and
ageing test
Footwear sizes in mondopoint system Part 1
Fundamental characteristics
Footwear sizes in mondopoint system: Part 2 Length
grading
Protective boots for oil field workmen: Part 1
Leather upper boots
Protective boots for oil field workmen: Part 2
Rubber upper boots
Metal lasts for knee boots
Safety footwear for steel plant
Safety rubber ankle boots for miners
Rubber hawai chappal
Shanks for footwear
Leather safety shoes for women workers in mines
and steel plants
Slipper, rubber
PVC industrial boots - Specification
PVC boots, resistant to oils and fats - Specification
Leather safety footwear having direct moulded
rubber sole - Specification
Code of practice for manufacture of safety rubber
IS 12240 : Part 1
IS 12240 : Part 2
IS 12240 : Part 3
IS 12240 : Part 4
IS 12240 : Part 5
IS 12240 : Part 6
IS 12240 : Part 7
IS 12240 : Part 8
IS 13292
IS 13295
IS 13469
IS 13575
IS 13800
IS 13893
IS 13995
IS 5
IS 13695
IS 14290
IS 14544
IS 82
IS 85
IS 96
IS 101 : Part 1 :
Sec 1
IS 101 : Part 1 :
Sec 2
footwear for miners
Methods of test for polyvinyl chloride boots: Part 1
Measurement of thickness
Methods of test for polyvinyl chloride boots: Part 2
Determination of durometer hardness Shore A
Methods of test for polyvinyl chloride boots: Part 3
Determination of relative density
Methods of test for polyvinyl chloride boots: Part 4
Determination of volatility
Methods of test for polyvinyl chloride boots: Part 5
Determination of lead content
Methods of test for polyvinyl chloride boots: Part 6
Determination of tensile strength and elongation at
break
Methods of test for polyvinyl chloride boots: Part 7
Flexing test resistance to cut growth for soling
material
Methods of test for polyvinyl chlorde boots: Part 8
Resistance to flexing for polyvinyl chloride upper
material
PVC boots, resistant to chemicals - Specification
Code of practice for manufacture of leather safety
boots and shoes for workers in mines and heavy
metal industry
Gents' shoe with direct moulded PVC sole Specification
Lined antistatic rubber footwear - Specification
Shoe sizes - Method of marking
Polyurethane soles semirigid
Unlined moulded rubber boots - Specification
Colours for ready mixed paints and enamels
Lined or unlined rubber boots, resistant to chemicals
- Specification
Lined industrial rubber footwear for use at low
temperature - Specification
Leather safety footwear with direct moulded PVC
soles - Specification
Method of sampling and test for thinners and solvent
for paints
Methods of test for oil pastes for paints
Oil paste for paints, interior, white
Methods of sampling and test for paints, varnishes
and related products Part 1 Test on liquid paints
(general and physical) Sec 1 Sampling
Methods of sampling and test for paints, varnishes
and related products Part 1 Test on liquid paints
IS 10433 : Part 2
IS 10453 : Part 1
IS 101 : Part 1 :
Sec 3
IS 101 : Part 1 :
Sec 4
IS 104
IS 168
IS 198
IS 289
IS 337
IS 101 : Part 1 :
Sec 5
IS 101 : Part 1 :
Sec 6
IS 101 : Part 1 :
Sec 7
IS 101 : Part 2 :
Sec 1
IS 101 : Part 2 :
Sec 2
IS 101 : Part 3 :
Sec 1
IS 101 : Part 3 :
Sec 2
IS 101 : Part 3 :
Sec 4
IS 101 : Part 3 :
Sec 5
IS 344
(general and physical) Sec 2 Preliminary
examination and preparation of samples for testing
Male stud tee body (stud run) for oil-hydraulic
couplings : Part 2 Made from bar stock
Taper male stud tee body (stud run) for oil-hydraulic
couplings : Part 1 Made from forging
Methods of sampling and test for paints, varnishes
and related products Part 1 Test on liquid paints
(general and physical) Sec 3 Preparation of panels
Methods of sampling and test for paints, varnishes
and related products Part 1 Test on liquid paints
(general and physical) Sec 4 Brushing test
Ready mixed paint, brushing, zinc chrome, priming
Ready mixed paint, air-drying, semi-glossy/matt, for
general purposes
Varnish gold size
Aluminium paste for paints
Varnish, finishing interior
Methods of sampling and test for paints, varnishes
and related products Part 1 Tests on liquid paints
(general and physical) Sec 5 Consistency
Methods of sampling and test for paints, varnishes
and related products Part 1 Test on liquid paints
(general and physical) Sec 6 Flash point
Methods of sampling and test for paints, varnishes
and related products Part 1 Test on liquid paints
(general and physical) Sec 7 Mass per 10 litres
Methods of sampling and test for paints, varnishes
and related products Part 2 Test on liquid paints
(chemical examination) Sec 1 Water content
Methods of sampling and test for paints, varnishes
and related products Part 2 Test on liquid paints
(chemical examination) Sec 2 Volatile matter
Methods of sampling and test for paints, varnishes
and related products Part 3 Tests on paint film
formation Sec 1 Drying time
Methods of sampling and test for paints, varnishes
and related products Part 3 Tests on paint film
formation Sec 2 Film thickness
Methods of sampling and test for paints, varnishes
and related products Part 3 Tests on paint film
formation Sec 4 Finish
Methods of sampling and test for paints, varnishes
and related products Part 3 Tests on paint film
formation Sec 5 Fineness of grind
Varnish, stoving
IS 347
IS 348
IS 419
IS 423
IS 101 : Part 4 :
Sec 1
IS 101 : Part 4 :
Sec 2
IS 101 : Part 4 :
Sec 3
IS 101 : Part 4 :
Sec 4
IS 101 : Part 5 :
Sec 1
IS 101 : Part 5 :
Sec 2
IS 101 : Part 5 :
Sec 3
IS 101 : Part 5 :
Sec 4
IS 101 : Part 6 :
Sec 1
IS 427
IS 428
IS 430
IS 431
IS 101 : Part 6 :
Sec 2
IS 101 : Part 6 :
Sec 3
IS 101 : Part 6 :
Sec 4
Varnish, shellac, for general purposes
French polish
Putty, for use on window frames
Plastic wood for joiners filter
Methods of sampling and test for paints, varnishes
and related products Part 4 Optical tests on paint
films Sec 1 Opacity
Methods of sampling and test for paints, varnishes
and related products Part 4 Optical tests on paint
films Sec 2 Colour
Methods of sampling and test for paints, varnishes
and related products Part 4 Optical tests on paint
films Sec 3 Light fastness test
Methods of sampling and test for paints, varnishes
and related products Part 4 Optical tests on paint
films Sec 4 Gloss
Methods of sampling and test for paints, varnishes
and related products Part 5 Mechanical test on paint
films Sec 1 Hardness tests
Methods of sampling and test for paints, varnishes
and related products part 5 Mechanical test on paint
films Sec 2 Flexibility and adhesion
Methods of sampling and test for paints, varnishes
and related products Part 5 Mechanical test on paint
films Sec 3 Impact resistance (falling ball test)
Methods of sampling and test for paints, varnishes
and related products Part 5 Mechanical test on paint
films Sec 4 Print free test
Methods of sampling and test for paints, varnishes
and related products Part 6 Durability tests on paint
films Sec 1 Resistanc to humidity under conditions
of condensation
Distemper, dry, colour as required
Distemper, oil emulsion, colour as required
Paint remover, solvent type, non-flammable
Paint remover, solvent type flammable
Methods of sampling and test for paints, varnishes
and related products Part 6 Durability tests on paint
films Sec 2 Keeping properties
Methods of sampling and test for paints, varnishes
and related products Part 6 Durability tests on paint
films Sec 3 Moisture vapour permeability
Methods of sampling and test for paints, varnishes
and related products Part 6 Durability tests on paint
films Sec 4 Degradation of coatings (pictorial aids
for evaluation)
IS 101 : Part 6 :
Sec 5
IS 101 : Part 7 :
Sec 2
IS 101 : Part 7 :
Sec 3
IS 101 : Part 7 :
Sec 4
IS 101 : Part 8 :
Sec 1
IS 101 : Part 8 :
Sec 2
IS 524
IS 525
IS 101 : Part 8 :
Sec 3
IS 101 : Part 8 :
Sec 4
IS 101 : Part 8 :
Sec 5
IS 101 : Part 8 :
Sec 6
IS 101 : Part 9 :
Sec 1
IS 101 : Part 9 :
Sec 2
IS 109
IS 110
IS 123
Method of sampling and test for paints, varnishes
and related products Part 6 Durability test on Paint
films section 5 Accelerated weathering test
Methods of sampling and test for paints, varnishes
and related products part 7 Environmental tests on
paint films Sec 2 Resistance to liquids
Methods of sampling and test for paints, varnishes
and related products Part 7 Environmental tests on
paint films Sec 3 Resistance to heat
Methods of sampling and test for paints, varnshes
and related products Part 7 Environmental tests on
paint films Sec 4 Resistance to bleeding of pigments
Methods of sampling and test for paints, varnishes
and related products Part 8 Tests for pigments and
other solids Sec 1 Residue on sieve
Methods of sampling and test for paints, varnishes
and related products Part 8 Tests for pigments and
other solids Sec 2 Pigments and non-volatile matter
Varnish, finishing, exterior, synthetic, air drying
Varnish, finishing, exterior and general purposes
Methods of sampling and test for paints, varnishes
and related products: Part 8 Tests for pigments and
other solids: Sec 3 Ash content
Methods of sampling and test for paints, varnishes
and related products: Part 8 Tests for pigments and
other solids: Sec 4 Phthalic anhydride
Methods of sampling and test for paints, varnishes
and related products: Part 8 Tests for pigments and
other solids: Sec 5 Lead restriction
Methods of sampling and test for paints, varnishes
and related products: Part 8 Tests for pigments and
other solids: Sec 6 Volume solids
Methods of sampling and test for paints, varnishes
and related products: Part 9 Tests for lacquers and
varnish: Sec 1 Acid value
Methods of sampling and test for paints, varnishes
and related products: Part 9 Tests for lacquers and
varnish: Sec 2 Rosin test
Ready mixed paint, brushing, priming, plaster, to
Indian Standard Colour No. 361 and 631 white and
off white
Ready mixed paint, brushing, grey filler, for enamels
for use over primers
Ready mixed paint, brushing, finishing, semi-gloss,
for general purposes to Indian Standard Colours
No.445, 446, 448, 449, 451, 473 and red oxide
IS 137
IS 148
IS 149
IS 150
IS 151
IS 152
IS 153
IS 642
IS 870
IS 1232
IS 1303
IS 2339
IS 2933
IS 3537
IS 3539
IS 3709
IS 5410
IS 5411 : Part 1
IS 5411 : Part 2
IS 3585
IS 5660
IS 5661
IS 6947 : Part 1
(colour unspecified)
Ready mixed paint, brushing, matt or eggshell flat,
finishing, interior to Indian Standard Colour as
required
Ready mixed paint, brushing, undercoating, stoving,
for enamels and general purposes, colour as required
Ready mixed paint, spraying, undercoating, stoving,
for enamels and general purposes colour as required
Ready mixed paint, brushing, finishing, stoving for
enamel colour as required
Ready mixed paint, spraying, finishing, stoving,
enamel, for general purposes, colour as required
Ready mixed paint, brushing, stoving lead-free, for
general purposes, colour as required
Ready mixed paint, spraying stoving, lead-free, for
general purposes, colour as required
Varnish medium for aluminium paint
Ready mixed paint, brushing, finishing, egg shell
gloss for interior use to Indian Standard Colours
No.101, 216, 217, 219, 275, 281 and 358
Ready mixed paint, brushing, yellow ochre, semigloss, for general purposes
Glossary of terms relating to paints
Aluminium paint for general purposes, in dual
container
Enamel exterior (a) undercoating, (b) finishing
Ready mixed paint, finishing, interior,for general
purposes, to Indian Standard Colours
No.101,216,217,219,275,281,352,353,358to361,363,
364,388,410,442,444,628,631,632,634,693,697,
white and black
Ready mixed paint, undercoating, for use under oil
finishes, to Indian Standard Colours, as required
Mastic cement for bedding of metal windows
Cement paint
Plastic emulsion paint Part 1 For interior use
Plastic emulsion paint Part 2 For exterior use
Ready mixed paint, aluminium, brushing priming,
water resistant, for woodwork
Ready mixed paint, brushing, aluminium-red oxide
primer
Code of practice for packing and marking of
packages of paints, enamels, varnishes and allied
products
Methods of estimation of composite pigments in oil
pastes, ready mixed paints and enamels Part 1
IS 6947 : Part 3
IS 10018
IS 13183
IS 14314
IS 35
IS 38
IS 40
IS 51
IS 54
IS 55
IS 56
IS 58
IS 62
IS 63
IS 64
IS 66
IS 68
IS 70
IS 79
IS 81
IS 354 : Part 1
IS 354 : Part 2
IS 354 : Part 3
IS 354 : Part 5
IS 354 : Part 6
IS 354 : Part 7
IS 356
IS 411
IS 553
IS 643
Estimation of lead, zinc oxide, titanium dioxide,
calcium compounds and zinc sulphide
Methods of estimation of composite pigments in oil
pastes, ready mixed paints and enamels Part 3
Estimation of lead chromes, iron blue and zinc
compounds
Lacquer, cellulose, nitrate, clear, finishing, glossy
for wood
Aluminium paint, heat resistant - Specification
Thinner general purposes for synthetic paints and
varnishes - Specification
Zinc oxide for paints
Antimony oxide for paints
Carbon black for paints
Zinc chrome for paints - Specification
Green oxide of chromium for paints
Ultramarine blue for paints
Prussian blue (iron blue) for paints
Litharge
Graphite for paints
Whiting for paint and putty
Barium sulphate pigments for paints
Magnesium silicate pigments for paints
China clay (Kaolin) for paints
Cuprous oxide for paints
Linseed stand oil for paints
Dehydrated castor oil for paints
Methods of sampling and test for resins for paints:
Part 1 General test methods
Methods of sampling and test for resins for paints :
Part 2 Special test methods for alkyd resins
Methods of sampling and test for resins for paints:
Part 3 Special test methods for phenolic resins
Methods of sampling and test for resins for paints:
Part 5 Special test methods for polyamide resins
Methods of sampling and test for resins for paints :
Part 6 Special test methods for amino resins
Methods of sampling and test for resins for paints :
Part 7 Special test methods for monomer content in
acrylic or venyl acetate containing polymers and
emulsion
Ester gum
Titanium dioxide, anatase, for paints
Rosin (gum rosin)
Cyclohexane (hexahydrobenzene) for paints
IS 3493
IS 3526
IS 3527
IS 3574 : Part 1
IS 6667
IS 8766
IS 8767
IS 9788
IS 10897
IS 11811
IS 13467
IS 14355
IS 14499
IS 15
IS 16 : Part 2
IS 17
IS 868
IS 1746
IS 2978
IS 4779
IS 4908
IS 5467
IS 5468
IS 5480
IS 5481
IS 5487
IS 5969
IS 6045
IS 6271
IS 6350
IS 6704
IS 6766
IS 6771
IS 6921
IS 7982
IS 7984
IS 8171
IS 8541
IS 9035
IS 9036
Methods of sampling and test for organic pigments
for paints
Barium chromate for paints
Mica for paints
Organic pigments for paints: Part 1 Azo pigments
Glossary of terms used in synthetic resin industry
Driers for paints
Calcium carbonate, precipirated and activated for
paints
Titanium dioxide, rutile for paints
Zinc phosphate pigment for paints
Alkyd resins
Chlorinated rubber for paints - Specification
Zinc dust pigments for paints - Specification
Strontium chromate for paints - Speciification
Seedlac
Shellac Part 2 Machine-made shellac
Bleached lac
Sealing wax
Shoe polish, paste
By-products of lac
Leather sole and edge wax polishes
Glossary of terms used in lac industry
Shellac wax
Blanco
Automobile polish, paste
Floor polish, liquid
Metal polish, liquid
Metal polish, paste
Wax-emulsion sole leather polish
Silver polish, liquid
Shoe cream
Pigmented floor polish, paste
Buffing compounds used for nickel and chrome
plated surfaces
Aluminium polish, paste for aircraft
Methods of sampling and test for lac and lac
products
Automobile polish, liquid
Rubbing compound
Glossary of terms relating to polishes and related
materials
Floor polish for floor and wooden furniture
Polishes for transparent plastics in sheet form, paste
Polishes for transparent plastics in sheet form, liquid
IS 9518
IS 10024
IS 10025
IS 12010
IS 12123
IS 12518
IS 12921
IS 13294
IS 13977
IS 384
IS 1103
IS 1104
IS 1843
IS 1844
IS 2616
IS 2621
IS 2622
IS 3008
IS 3009
IS 3015
IS 3387
IS 3451 : Part 1
IS 3451 : Part 2
IS 4208
IS 4214
IS 4301
IS 4517
IS 4580
IS 4584
IS 5060
IS 5078
IS 5080
IS 5207
IS 5683
IS 7457
IS 7473
IS 7477
IS 7782
IS 8592
IS 9276
IS 9657
Automobile polish, liquid, containing silicone
Jewellers polishing rouge
Polish liquid (white) for canvas footwear
Shoe polish, liquid
Aluminium polish, liquid for aircraft
Shellac bond powder
Lac dye
Non-buffable floor polish, liquid
Polish liquid, multipurpose
Brushes, paints and varnishes, flat
Brushes, artist's
Brushes, lettering
Nylon monofilaments
Bristles
Brush, i) cleaning tank, and ii) commode and
lavatory
Brush, commode chutes
Brush, banister (hand sweeping), single
Brush, shoe blacking
Brush, shoe polishing
Brush, scrubbing
Toothbrush
Code of practice for care and maintenance of
brushes, Part 1 - Pan set brushes
Code of practice for care and maintenance of
brushes, Part 2 - Brushes other than pan set brushes
Brush, stencil
Brush, boiler tube (without shank) - Specification
Brushes, foundry, flat
Brush, welder's
Brushes, shaving
Brushes, hair
Glossary of terms used in brushware industry
Brushes, typewriter
Brushes, nail-cleaning
Brushes, clothes
Brushes, push-sweeping (without handle)
Brushes, flue
Brushes, tar
Brushes, harness, hard
Brushes, test tube
Methods for identification of brush filling materials
of animal origin
Brushes, horse
Brushes, milk pipettes
IS 9658
IS 9659
IS 11750
IS 12920
IS 13348
IS 1796
IS 2887
IS 4955
IS 4956
IS 5785 : Part 1
IS 5785 : Part 2
IS 5785 : Part 3
IS 5785 : Part 4
IS 5785 : Part 5
IS 6047
IS 7532
IS 7597
IS 7983
IS 8180
IS 8401
IS 8540
IS 9458
IS 9985
IS 10513
IS 10523
IS 10536
IS 10549
IS 10758
IS 10813
IS 11303
IS 11479
IS 11601 : Part 1
IS 11601 : Part 2
IS 12767
Brushes, milk sample bottle
Brushes, butyrometers
Brush, fitch, flat with long handle
Brush, drain cleaning (without handle)
Brush, rubber squeezer, with handle
Glycerine
Laundry soap powders
Household laundry detergent powders
Synthetic detergent for industrial purposes
Methods for performance tests for surface active
agents: Part 1 Relative dispersing power
Methods for performance tests for surface active
agents: Part 2 Relative emulsifying power
Methods for performance tests for surface active
agents: Part 3 Foaming power
Methods for performance tests for surface active
agents: Part 4 Relative detergency
Methods for performance tests for surface active
agents: Part 5 Wetting power
Scouring powders
Soft soap
Glossary of terms relating to surface active agents
Toilet cleaner liquid - specification
Household laundry detergent bars
Alkyl benzene sulphonic acid (acid slurry)
Glass cleaner, liquid
Synthetic detergents for washing woollen and silk
fabrics
Sodium alkyl benzene sulphonate, technical
Sodium oleostearate, technical (soap noodles)
Baby toilet soap
Castor oleine and castor oleo-stearine
Processed fixed oils for industrial uses
De-odorising-cum-disinfactant fluids
Soap jelly for laundry purposes
Transparent toilet soap
Antibacterial toilet soap
Methods of safety evaluation of synthetic detergents
: Part 1 Method of test for irritant potential of
synthetic detergents
Methods of safety evaluation for synthetic
detergents: Part 2 Method of test for skin
sensitization potential of synthetic detergents
(Guinea pig maximization test)
Liquid soap for cleaning painted surfaces
IS 12795
IS 13370
IS 13424
IS 13498
IS 13760
IS 13933
IS 14364
IS 301
IS 438
IS 708
IS 2307
IS 2653
IS 4396
IS 4668
IS 5670
IS 5671
IS 5713
IS 5731
IS 6609 : Part 1
IS 6609 : Part 2 :
Sec 1
IS 6609 : Part 2 :
Sec 2
IS 6609 : Part 2 :
Sec 3
IS 6609 : Part 3
IS 6609 : Part 4
IS 6609 : Part 5
Linear alkyl benzene
Linear fatty alcohols for surface active agents
Safety evaluation of bathing bars and toilet soap Methods of test
Bathing bars - Specification
Toilet cleaner, powder
Method of test for ready biodegradability of surface
active agents (Modified sturm test)
Quarternary ammonium compound based surface
cleaner, liquid - specification
Potassium nitrate for explosive and pyrotechnic
compositions
Aluminium powder for explosive and pyrotechnic
compositions
Potassium chlorate for explosive and pyrotechnic
industry
Magnesium powder for explosive and pyrotechnic
compositions
Safety matches in boxes
Barium nitrate for explosive and pyrotechnic
compositions
Ammonium nitrate for explosives
Lead thiocyanate for explosive and pyrotechnic
compositions
Strontium nitrate for pyrotechnic compositions
Manganese dioxide for explosive and pyrotechnic
compositions
Antimony sulphide for explosive and pyrotechnic
compositions
Methods of test for commercial blasting explosives
and accessories: Part I Gun powder
Methods of test for commercial blasting explosives
and accessories: Part II Explosives Section 1
Explosives, general
Methods of test for commercial blasting explosives
and accessories: Part II Explosives Section 2
Explosives, permitted
Methods of test for commercial blasting explosives
and accessories: Part II Explosives Section 3
Explosives, slurry
Methods of test for commercial blasting explosives
and accessories: Part III Detonators, general and
permitted
Methods of test for commercial blasting explosives
and accessories: Part IV Detonating fuses
Methods of test for commercial blasting explosives
IS 7124
IS 7401
IS 7526
IS 7588
IS 7589
IS 7602
IS 7632
IS 7633
IS 7738
IS 7886
IS 8063
IS 9600
IS 9880
IS 10081
IS 10126
IS 10212 : Part 1
IS 10373
IS 10374
IS 10821
IS 10977
IS 11483
IS 11491
IS 11783
IS 11803
IS 12238
IS 12276
IS 12437
IS 12630
IS 12631
IS 12632
IS 12681
IS 12684
IS 12980
and accessories: Part V Safety fuses
Gun powder
Paraffin wax for explosive and pyrotechnic industry
Detonating fuse - Specification
Barytes for explosives and pyrotechnic composition
China clay for explosive and pyrotechnic industry
Lead chromate for explosive and pyrotechnic
compositions
Detonators
Calcium carbonate for explosive and pyrotechnic
industry
Safety fuse for commercial use
Barium chromate for explosive and pyrotechnic
industry - Speciification
Red lead for explosive and pyrotechnic industry
Safety matches in booklets
Wax coated paper splints
Glossary of terms relating to explosives, pyrotechnic
and blasting practices
Sparklers
General requirements for packages of explosives:
Part 1 Commercial high explosives
Plastic boxes for safety matches
Wooden splints for safety matches
Calcium nitrate for explosive and pyrotechnic
compositions
Pentaerythritol for explosive industry
Amorces (Paper caps for toy pistols)
Blasting soluble nitrocellulose for explosives
industry
Ferro-silicon for explosive and pyrotechnic industry
Magnesium oxide for explosive ammunition
protective compositions and pyrotechnic industry
Colour and star matches in boxes
Dextrin for explosives and pyrotechnic industry
Zirconium powder for use in explosive and
pyrotechnic industry
Pyrotechnics - Fireworks black serpent pellets
Pyrotechnics - Fireworks pencils
Pyrotechnics - Fireworks twinkling stars
Sodium nitrate for explosives and pyrotechnics
industry
Calcium stearate for explosives and pyrotechnic
industry
Fireworks rockets - Specification
IS 13227
IS 13522
IS 13524
IS 13526
IS 661
IS 3069
IS 3144
IS 3346
IS 3677
IS 3690
IS 4671
IS 5688
IS 5724
IS 6598
IS 7509
IS 8154
IS 8183
IS 9428
IS 9742
IS 9743
IS 9403
IS 9489
IS 9490
IS 9842
IS 10555
IS 10556
IS 11128
Fireworks whistles
Charcoal for explosives and pyrotechnic industry
Potassium perchlorate for explosives and
pyrotechnic compositions
Sodium perchlorate solution for explosives and
pyrotechnic compositions
Code of practice for thermal insulation of cold
storages
Glossary of terms, symbols and units relating to
thermal insulation materials
Methods of test for mineral wool thermal insulation
materials
Method of the determination of thermal conductivity
of thermal insulation materials (two slab guarded hot
plate method)
Unbonded rock and slag wool for thermal insulation
(Superseding IS:5696)
Unbonded glass wool for thermal insulation
Expanded polystyrene for thermal insulation
purposes
Methods of test for preformed block-type and pipe
covering type thermal insulation
Methods of test for thermal insulating cements
Cellular concrete for thermal insulation
Thermal insulating cement
Preformed calcium silicate insulation (for
temperature upto 650øC)
Bonded mineral wool
Preformed calcium silicate insulation (for
temperature upto 950øC)
Sprayed mineral wool thermal insulation
Thermal insulation finishing cements
Method of test for thermal conductance and
transmittance of built up sections by means of
guarded hot box
Method of test for thermal conductivity of materials
by means of heat flow meter
Method for determination of thermal conductivity of
insulation materials (water colorimeter method)
Preformed fibrous pipe insulation
Exfoliated vermiculite
Code of practice for storage and handling of
insulation materials
Spray applied hydrated calcium silicate thermal
insulation
IS 11129
IS 11239 : Part 2
IS 11239 : Part 3
IS 11239 : Part 4
IS 11239 : Part 5
IS 11239 : Part 6
IS 11239 : Part 7
IS 11239 : Part 8
IS 11239 : Part 9
IS 11239 : Part
10
IS 11239 : Part
11
IS 11239 : Part
12
IS 11239 : Part
14
IS 11307
IS 13204
IS 1091
IS 3517
IS 11308
IS 12432 : Part 1
IS 12432 : Part 2
IS 12436
IS 13205
IS 14164
IS 3518
IS 3519
IS 3520
IS 3532
IS 8782
IS 9191
IS 9546
Method of test for tumbling friability of preformed
block-type thermal insulation
Apparent density
Dimensional stability
Water vapour transmission rate
Volume percent of open and closed cells
Heat distortion temperature
Coefficient of linear thermal expansion at low
temperatures
Flame height, time of burning and loss of mass
Water absorption
Flexural strength
Compressive strength
Horizontal burning characteristics
Determination of flammability by oxygen index
Cellular glass block and pipe thermal insulating
Rigid phenolic foams for thermal insulation
Nitrocellulose
Cotton linters
Thermal insulating castables (hydraulic setting) for
temperatures upto 1250øC
Code of practice for application of spray applied
insulation Part 1 Mineral fibre
Application of spray applied insulation - Code of
practice Part 2 Calcium silicate
Specification for preformed rigid polyurethane
(PUR) and Iso cyanurate (PIR) foams for thermal
insulation
Code of practice for the application of polyurethane
insulation by the in-situ pouring method
Industrial application and finishing of thermal
insulation material at temperature above -80 deg C
and up to 700 deg C - Code of practice
Chemical cotton for viscose and cellulose acetate
Methods of sampling and test for chemical cotton
Water-soluble sodium carboxymethyl cellulose
Chemical cotton for nitrocellulose
Chemical cotton for paper manufacture
Code of practice for storing cotton linters
Method of determination of cellulose in chemical
cotton
IS 9594
IS 9598
IS 11213
IS 12179
IS 12253
IS 13966
IS 13974
IS 102
IS 13470
IS 14194 : Part 1
IS 14194 : Part 2
IS 14194 : Part 3
IS 14194 : Part 4
IS 139
IS 140
IS 142
IS 144
IS 145
IS 146
IS 147
IS 158
IS 159
IS 163
IS 290
IS 341
Cellulose powder
Microcrystalline cellulose powder
Defibrated linters
Method of determination of sulphuric acid
luminosity and bottle acetylation of chemical cotton
Glossary of terms relating to linters and its allied
products
Carboxymethyl cellulose - Specification
Polyanionic cellulose - Specification
Ready mixed paint, brushing, red lead, non-setting,
priming
Method of determination of cellulose yield of cotton
linters by mechanical analysis
Radionuclides in environmental samples - Method
of estimation: Part 1 Gross beta activity
measurement
Radionuclides in environmental samples - Method
of estimation: Part 2 Gross alpha activity
measurement
Radionuclides in environmental samples - Method
of estimation : Part 3 Uranium
Radionuclides in environmental samples - Method
of estimation : Part 4 Radium
Ready mixed paint, marking, quick drying, for
marking with rubber stamps
Ready mixed paint, exterior, petrol resisting, air
drying
Ready mixed paint, exterior, petrol resisting stoving
Ready mixed paint, brushing, petrol resisting, airdrying, for interior painting of tanks and container,
red oxide (colour unspecified)
Ready mixed paint, slushing, petrol resisting, airdrying for interior painting of tanks and containers,
red oxide (colour unspecified)
Ready mixed paint, brushing, petrol resisting,
stoving, for interior painting of tanks and containers,
red oxide (colour unspecified)
Ready mixed paint, slushing, petrol resisting
stoving, for interior painting of tanks and containers,
red oxide (colour unspecified)
Ready mixed paint, brushing, bituminous, black,
lead-free, acid, alkali and heat resisting
Ready mixed paint, brushing, acid resisting
Ready mixed paint, dipping, fire resisting
Coal tar black paint
Black japan, Types A, B and C
IS 162
IS 342
IS 349
IS 424
IS 1404
IS 1419
IS 1872
IS 1874
IS 3678
IS 5083
IS 5666
IS 5667
IS 5691
IS 6125
IS 6126
IS 6714
IS 6948
IS 7164
IS 8098 : Part 1
IS 8098 : Part 2
IS 8982
IS 8983
IS 11883
IS 13184
IS 8662
IS 9034
IS 9862
IS 13213
IS 13238
Ready mixed paint, brushing, fire resisting, silicate
type for use on wood, colour as required
Varnish, acid resisting
Lacquer, cellulose nitrate, clear, finishing, glossy for
metal
Plastic asphalt
Anti-corrosive paint, brushing for ships' bottom and
hulls, red or chocolate
Anti-fouling paint, brushing, for ship's bottoms and
hulls
Thinner for synthetic paints and varnishes for
aircrafts
Ready mixed paint, universal zinc chrome, priming
(synthetic) for light alloys
Ready mixed paint, thick white, for lettering
Knifing stopper
Etch primer
Thinner for cellulose nitrate based paints and
lacquers
Lacquer, cellulose, pigmented, finishing, glossy
Enamel, synthetic, stoving, for automobiles
Nitrocellulose surfacer
Ready mixed paint, finishing, non-slip deck
Ready mixed paint, undercoat, synthetic for ships
Stopper
Code of practice for finishing of automobile bodies
Part 1 Finishing of passenger cars
Code of practice for finishing of automobile bodies
Part 2 Refinishing of passenger cars
Ready mixed paint, finishing air drying for war
equipment
Ready mixed paint, finishing, stoving for war
equipment
Ready mixed paint, brushing, red oxide, priming for
metals
Mastic filler, epoxy based (two pack)
Enamel, synthetic, exterior (a) undercoating (b)
finishing for railway coaches
Enamel, synthetic, exterior, air drying, for use on
primed surfaces of motor vehicles and other
equipment
Ready mixed paint, brushing, bituminous, black,
lead-free, acid, alkali, water and chlorine resisting
Polyurethane full gloss enamel (two pack)
Epoxy based zinc phosphate primer (two pack)
IS 13239
IS 13759
IS 13798
IS 14209
IS 14506
IS 14589
IS 4167
IS 5182 : Part 3
IS 5182 : Part 4
IS 5182 : Part 7
IS 5182 : Part 8
IS 5182 : Part 9
IS 9078
IS 12002
IS 13270
IS 5182 : Part 10
IS 5182 : Part 11
IS 5182 : Part 12
IS 5182 : Part 13
IS 5182 : Part 15
IS 5182 : Part 16
IS 5182 : Part 18
Epoxy surfacer (two pack)
Polyurethane primer zinc phosphate (two pack) for
exterier painting of railway coaches
Polyurethane based knifing filler
Epoxy enamel, two component, glassy Specification
Epoxy red oxide zinc phosphate weldable primer,
two component - Specification
Zinc priming paint,epoxy based ,two pack Specification
Glossary of terms relating to air pollution
Methods for measurement of air pollution : Part 3
Radioactivity (particulate in air)
Methods for measurement of air pollution : Part 4
Suspended matter
Methods for measurement of air pollution : Part 7
Hydrogen sulphide
Methods for measurement of air pollution : Part 8
Sulphation rate
Methods for measurement of air pollution : Part 9
Oxidants
Code for use of Ringelmann and miniature smoke
charts
Code of practice for control of air pollution from
cement plants
Test for gases by orsat and chromatographic
methods
Methods for measurement of air pollution : Part 10
Carbon monoxide
Methods for measurement of air pollution : Part 11
Benzene
Methods for measurement of air pollution : Part 12
Polynuclear aromatic hydrocarbons in air particulate
matter
Methods of measurement of pollutants in ambient air
: Part 13 Total fluorides
Methods for measurement of air pollution : Part 15
Mass concentration of particulate matter in the
atmosphere
Methods for measurement of air pollution : Part 16
Recommended practice for collection by filteration
and determination of mass, number and optical
sizing of atmospheric particulates
Methods for measurement of air pollution : Part 18
Continuous analysis and
automatic
recording of the oxidant content of atmosphere
IS 5182 : Part 19
IS 5182 : Part 20
IS 10179
IS 11255 : Part 1
IS 11255 : Part 2
IS 9569
IS 10158
IS 12625
IS 11255 : Part 3
IS 11255 : Part 4
IS 11255 : Part 5
IS 11304
IS 12112
IS 12185
IS 9234
IS 9235
IS 10447
IS 12647
IS 12662 : Part 1
IS 14001
IS 14004
IS 14010
IS 14020
Methods for measurement of air pollution : Part 19
Chlorine
Methods for measurement of air pollution : Part 20
Carbon disulphide
Code of practice for control of air pollution in
petroleum refineries
Methods for measurement of emissions from
stationary sources : Part 1 Particulate matter
Methods for measurement of emissions from
stationary sources : Part 2
Sulphur dioxide
Glossary of terms relating to solid wastes
Method for analysis of solid wastes (excluding
industrial wastes)
Solid wastes - Hospitals - Guidelines for
management
Methods for measurement of emissions from
stationary sources : Part 3 Flow rate
Methods for measurement of emissions from
stationary sources : Part 4 Hydrogen sulphide and
carbon disulphide
Methods for measurement of emissions from
stationary sources : Part 5 Total fluorides
Code of practice for control of air pollution in iron
and steel plants
Code of practice for control of air pollution in
refractories industry
Code of practice for control of air pollution in
integrated aluminium industries
Methods for preparation of solid waste sample for
chemical and microbiological analysis
Methods for physical analysis and determination of
moisture in solid wastes (excluding industrial
wastes)
Guidelines for utilization and disposal of solid waste
from integrated steel plants
Guidelines for collection equipments
Guidelines for use of vehicles for collectiion of
municipal solid wastes : Part 1 Selection of vehicles
Environmental management systems -Specification
with guidance for use
Environmental management systems - General
guidelines on principles, system and supporting
techniques
Guidelines for environmental auditing - General
principles
Environmental labels and declarations - General
IS 14050
IS 1885 : Part 14
IS 1885 : Part 29
IS 14012
IS 14040
IS 14041
IS 1885 : Part 1
IS 1885 : Part 8
IS 1885 : Part 9
IS 1885 : Part 10
IS 1885 : Part 11
IS 1885 : Part 15
IS 1885 : Part 27
IS 1885 : Part 28
IS 1885 : Part 30
IS 1885 : Part 32
IS 1885 : Part 34
IS 1885 : Part 35
IS 1885 : Part 54
IS 1885 : Part 55
IS 7691
IS 1885 : Part 37
IS 1885 : Part 38
IS 1885 : Part 42
IS 1885 : Part 43
IS 1885 : Part 51
principles
Environmental Management - Vocabulary
Electrotechnical vocabulary: Part 14 Nuclear power
plants
Electrotechnical vocabulary: Part 29 Mining terms
Guidelines for environmental auditing Qualification criteria for environmental auditors
Environmental Management - Life cycle assessment
- Principles and framework
Environmental management - Life cycle assessment
- Goal and scope definition and inventory analysis
Electrotechnical vocabulary: Part 1 Fundamental
definitions
Electrotechnical vocabulary: Part 8 Secondary cells
and batteries (superseding IS:1174)
Electrotechnical Vocabulary: Part 9 Electrical relays
Electrotechnical Vocabulary: Part 10 Power system
protection
Electrotechnical vocabulary: Part 11 Electrical
measurements
Electrotechnical vocabulary: Part 15 Primary cells
and batteries_(superseding IS:1025)
Electrotechnical Vocabulary: Part 27 Power
electronics
Electrotechnical vocabulary: Part 28 Instrument
transformers
Electrotechnical vocabulary: Part 30 Overhead
transmission and distribution of electrical energy
Electrotechnical Vocabulary: Part 32 Electric cables
Electrotechnical vocabulary: Part 34
Cinematography
Electrotechnical vocabulary: Part 35 Rotating
machinery
Electrotechnical Vocabulary: Part 54 Insulators
Electrotechnical vocabulary: Part 55 Electric fans
Frequencies for special power applications
Electrotechnical vocabulary: Part 37 Tariffs for
electricity
Electrotechnical vocabulary: Part 38 Transformers
Electrotechnical Vocabulary: Part 42 Power
capacitors
Electrotechnical vocabulary: Part 43 Electrical
equipment used in medical practice
Electrotechnical vocabulary: Part 51 Industrial
electro-heating
IS 1885 : Part 53
IS 1885 : Part 57
IS 1885 : Part 60
IS 1885 : Part 61
IS 1885 : Part 62
IS 1885 : Part 69
IS 1885 : Part 70
IS 1885 : Part 71
IS 9499
IS 9676
IS 4820
IS 5424
IS 1885 : Part 72
IS 1885 : Part 73
: Sec 1
IS 1885 : Part 73
: Sec 2
IS 1885 : Part 73
: Sec 3
IS 1885 : Part 74
IS 1885 : Part 75
IS 1885 : Part 76
IS 1885 : Part 77
IS 1885 : Part 78
IS 1885 : Part 79
IS 1885 : Part 80
Electrotechnical vocabulary: Part 53 Mica
(superseding IS:1174)
Electrotechnical vocabulary: Part 57 Electric and
magnetic circuits
Electrotechnical Vocabulary: Part 60 Electrical
apparatus for explosive atmospheres
Electrotechnical vocabulary: Part 61 Nuclear
medical instruments
Electrotechnical vocabulary: Part 62 Solid insulating
materials
Electrotechnical Vocabulary: Part 69 Generation,
transmission and distribution of electricity Generation
Electrotechnidal Vocabulary: Part 70 Generation,
transmis sion and distribution of electricity operation
Electrotechnical Vocabulary: Part 71
Generation,transmission and distribution of
electricity - Substations
Conventions concerning electric and magnetic
circuits
Reference ambient temperature for electrical
equipment
Vulcanized fibre sheets for electrical purposes Specificaion
Specification for rubber mats for electrical purpose
Electrotechnical Vocabulary : Part 72 Mathematics
Electrotechnical Vocabulary: Part 73 Physics and
chemistry, Section 01 Physicalconcepts
Electrotechnical Vocabulary: Part 73 Physics and
chemistry - Section 02 Electrotechnical concepts
Electrotechnical Vocabulary: Part 73 Physics and
chemistry - Section 03 Concepts related to quantities
and units
Electroechnical Vocabulary: Part 74 Electrical and
magnetic devices
Electrotechnical Vocabulary: Part 75 Automatic
control
Electrotechnical vocabularl: Part 76 Transductors
Electrotechnical Vocabulary: Part 77 Overhead lines
Electrotechnical Vocabulary: Part 78 Genereation,
transmission and distribution of electricity - General
Electrotechnical Vocabulary: Part 79 Generation,
transmission and distribution of electiricity - Power
system planning and management
Electrotechnical vocabulary: Part 80 General terms
IS 2032 : Part 15
IS 2032 : Part 19
IS 5711
IS 6230
IS 2032 : Part 25
IS 3599
IS 3722 : Part 1
IS 3722 : Part 2
IS 8270 : Part 1
IS 8270 : Part 2
IS 8270 : Part 3
IS 8270 : Part 4
IS 8270 : Part 5
IS 8270 : Part 6
IS 9409
IS 9677
IS 9678
IS 10580
IS 11954
IS 10381
on measurements in electricity
Graphical symbols used in electrotechnology: Part
15 Aircraft electrical symbols
Graphical symbols used in electrotechnology: Part
19 Electrical equipment used in medical practice
Vulcanized fibre rods and tubes for electrical
purposes
Woven asbestos tape for electrical insulating
purposes
Graphical symbols used in electrotechnology: Part
25 Electrical installations in ships
Methods of measurement of cooling medium
temperature for electrical apparatus
Letter symbols and signs used in electrical
technology: Part 1 General guidance on symbols and
subscripts
Letter symbols and signs used in electrical
technology: Part 2 Reference tables for symbols and
subscripts
Guide for preparation of diagrams, charts and tables
for electrotechnology: Part 1 Definitions and
classification
Guide for preparation of diagrams, charts and tables
for electrotechnology: Part 2 Item designation
Guide for preparation of diagrams, charts and tables
for electrotechnology: Part 3 General requirements
for diagrams
Guide for preparation of diagrams, charts and tables
for electrotechnology: Part 4 Circuit diagrams
Guide for preparation of diagrams, charts and tables
for electrotechnology: Part 5 Interconnection
diagrams and tables
Guide for preparation of diagrams, charts and tables
for electrotechnology: Part 6 Unit wiring diagrams
and tables
Classification of electrical and electronic equipment
with regard to protection against electric shock
Guide for limits of temperature-rise of the windings
of electrical equipment when tested by different
methods
Methods of measuring temperature rise of electrical
equipment
Service conditions for electrical equipment
Guide for colour coding of electrical mimic
diagrams
Terms (and their Hindi equivalents) commonly used
IS 11354
IS 12032 : Part 1
IS 12032 : Part 2
IS 12032 : Part 3
IS 12032 : Part 4
IS 12032 : Part 6
IS 12032 : Part 7
IS 12032 : Part 8
IS 12032 : Part
11
IS 1271
IS 1576
IS 2464
IS 3352
IS 12063
IS 12360
IS 2260
IS 2448 : Part 1
IS 2584
IS 2824
for name plates and similar data of electrical power
equipment
Guide for identification by hour numbers of the
phase conductors of 3-phase electric systems
Graphical symbols for diagrams in the field of
electrotechnology: Part 1 General information
Graphical symbols for diagrams in the field of
electrotechnology: Part 2 Symbols elements,
qualifying symbols and other symbols having
general application
Graphical symbols for diagrams in the field of
electrotechnology: Part 3 Conductors and connecting
devices
Graphical symbols for diagrams in the field of
electrotechnology: Part 4 Passive components
Graphical symbols for diagrams in the field of
electrotechnology: Part 6 Production and conversion
of electrical energy
Graphical symbols for diagrams in the field of
electrotechnology:Part 7 Switchgear, controlgear
and protective devices
Graphical symbols for diagrams in the field of
electrotechnology: Part 8 Measuring instruments,
lamps and signalling devices
Graphical symbols for diagrams in the field of
electrotechnology: Part 11 Architectural and
topographical installation plans and diagrams
Thermal evaluation and classification of electrical
insulation
Solid pressboard for electrical purposes specification
Built-up mica for electrical purposes
Varnished cotton cloth and tape for electrical
purposes
Classification of degrees of protection provided by
enclosures of electrical equipment
Voltage bands for electrical installations including
preferred voltages and frequency (superseding IS
585)
Preconditioning, conditioning and testing of solid
electrical insulating materials
Adhesive insulating tapes for electrical purposes:
Part 1 Tapes with cotton textile substrates
Method of test for electric strength of solid
insulating materials at power frequencies
Method for determining the comparative tracking
IS 3396
IS 4248
IS 4249
IS 4486
IS 5596
IS 7084
IS 7571
IS 9045
IS 9502
IS 11654 : Part 2
IS 7755
IS 7809 : Part 1
IS 7809 : Part 2
IS 7809 : Part 3 :
Sec 2
IS 7809 : Part 3 :
Sec 3
IS 7809 : Part 3 :
Sec 4
IS 7809 : Part 3 :
Sec 5
IS 8504 : Part 1
index of solid insulating materials under moist
conditions
Methods of test for volume and surface resistivities
of solid electrical insulating materials
Non-ignitable and self-extinguishing boards (with
mineral base) for electrical purposes
Classification and methods of tests for non-ignitable
and self-extinguishing properties of solid electrical
insulating materials
Recommended methods for the determination of the
permittivity and dielectric dissipation factor of
electrical insulating materials at power, audio and
radio frequencies including metre wavelengths
Method of test for determining deleterious
substances in fibrous insulating mat erials
Bitumen based filling conmpounds for electrical
purposes
Methods of tests for ceramic for telecommunication
and allied purposes
Thermal classification of phlogopite mica splittings
Muscovite mica components for electronic
equipment
Flexible insulating sleeving: Part 2 Methods of tests
High tension insulating cotton tape impregnated
with bitumen based compound
Pressure sensitive adhesive tapes for electrical
purposes: Part 1 General requirements
Pressure sensitive adhesive tapes for electrical
purposes: Part 2 Methods of test
Pressure sensitive adhesive tapes for electrical
purposes: Part 3 Specifications for individual
materials, Section 2 Requirements for polyester film
tapes (PETP) with thermosetting adhesive
Pressure sensitive adhesive tapes for electrical
purposes: Part 3 Specifications for individual
materials, Section 3 Polyester film tapes (PETP)
with non-thermosetting adhesive
Pressure sensitive adhesive tapes for electrical
purposes: Part 3 Specifications for individual
materials, Section 4 Cellulosic paper, creped with
thermosetting adhesive
Pressure sensitive adhesive tapes for electrical
purposes: Part 3 Specifications for individual
materials, Section 5 Cellulosic paper with
thermosetting adhesive
Guide for determination of thermal endurance
IS 8504 : Part 2
IS 13335
IS 3963
IS 4283
IS 4327
IS 4894
IS 8504 : Part 3
IS 8504 : Part 4
IS 8516
IS 9043
IS 9044
IS 9299 : Part 1
IS 9299 : Part 2
IS 9299 : Part 3 :
Sec 1
IS 9299 : Part 3 :
Sec 2
IS 9299 : Part 3 :
Sec 3
IS 6680
IS 11037
IS 13368
IS 283
properties of electrical insulating materials :Part 1
General Guidelines for ageing Procedures &
Evaluation of Test Results
Guide for determination of thermal endurance
properties of electrical insulating materials: Part 2
List of materials and available tests
Muscovite mica scrap for mica paper
Roof extractor units
Hot air fan
Electric fans and regulators for use in ships
Centrifugal fans
Guide for determination of thermal endurance
properties of electrical insulating materials Part 3 :
Statistical methods
Guide for determination of thermal endurance
properties of electrical insulating materials Part 4 :
Instructions for calculating the Thermal Endurance
Profile
Methods of test for determining electrolytic
corrosion with insulating materials
Method for grading (by size) of phlogopite mica
blocks, thins and splittings
Method of measuring thickness of mica blocks,
thins, films and splittings
Insulating materials based on built-up mica or
treated mica paper:Part 1 Definitions and general
requirements
Insulating materials based on built-up mica or
treated mica paper: Part 2 Methods of test
Insulating materials based on built-up mica or
treated mica paper: Part 3 Specifications for
individual materials: Section 1 Rigid mica material
for commutator separators
Insulating materials based on built-up mica or
treated mica paper:Part 3 Specifications for
individual materials, Section 2 Moulding mica
materials for electrical purposes
Insulating materials based on built-up mica or
treated mica paper: Part 3 Specifications for
individual materials, Section 3 Flexible mica flake
tape for insulation of electrical machines
Railway carriage fans
Electronic type fan regulators
Method of test for double inlet centrifugal fans
(industrial type)
Porcelain insulators for telegraph and telephone
IS 9299 : Part 3 :
Sec 4
IS 9299 : Part 3 :
Sec 5
IS 9299 : Part 3 :
Sec 7
IS 9335 : Part 1
IS 9335 : Part 2
IS 9335 : Part 3 :
Sec 1
IS 9335 : Part 3 :
Sec 2
IS 9335 : Part 3 :
Sec 3
IS 9335 : Part 3 :
Sec 4
IS 9335 : Part 3 :
Sec 5
IS 1441
IS 2099
IS 3188
IS 9455
IS 9947
IS 10026 : Part 1
IS 10026 : Part 2
IS 10026 : Part 3
: Sec 2
lines
Insulating materials based on built-up mica or
treated mica paper: Part 3 Specifications for
individual materials, Section 4 Rigid mica materials
for heating equipment
Insulating materials based on built up mica or
treated mica paper: Part 3 Specification for
individual meterials, Section 5, Flexible mica
materials in sheet form
Insulating materials based on built-up mica or
treated mica paper: Part 3 Specification for
individual material, Section 7 Mica paper
Cellulosic papers for electrical purposes:Part 1
Definitions and general requirements
Cellulosic papers for electrical purposes: Part 2
Methods of test (superseding IS:2188)
Cellulosic papers for electrical purposes:Part 3
Specifications for individual materials, Section 1
General purposes electrical paper
Cellulosic papers for electrical purposes:Part 3
Specifications for individual materials, Section 2
Capacitor paper
Cellulosic papers for electrical purposes:Part 3
Specifications for individual materials, Section 3
Crepe paper
Cellulosic papers for electrical purposes:Part 3
Specifications for individual materials, Section 4
Electrolytic capacitor paper
Cellulosic papers for electrical purposes:Part 3
Specifications for individual materials, Section 5
Special papers
Insulator stalks for telegraph and telephone lines
Bushings for alternating voltages above 1 000 Volts
Characteristics of string insulator units
Classification of muscovite mica blocks, thins and
films based on electrical properties
Test methods for evaluating resistance to tracking
and erosion of electrical insulating materials used
under severe ambient conditions
Insulating varnishes containing solvents:Part 1
Definitions and general requirements
Insulating varnishes containing solvents: Part 2
Methods of tests
Insulating varnishes containing solvents: Part 3
Specifications for individual materials, Section 2 Air
drying varnishes with temperature index 120
IS 10026 : Part 3
: Sec 4
IS 10026 : Part 3
: Sec 5
IS 10026 : Part 3
: Sec 7
IS 10026 : Part 3
: Sec 8
IS 10026 : Part 3
: Sec 9
IS 10163 : Part 1
IS 10192
IS 10333
IS 10581
IS 11221
IS 11256 : Part 1
IS 11256 : Part 2
IS 11256 : Part 3
IS 11297 : Part 1
IS 11297 : Part 2
IS 11297 : Part 3
: Sec 1
Insulating varnishes containing solvents: Part 3
Specifications for individual materials, Section 4
Baking varnishes with temperature index 120
Insulating varnishes containing solvents: Part 3
Specifications for individual materials, Section 5
Baking varnishes with temperature index 130
Insulating varnishes containing solvents: Part 3
Specifications for individual materials, Section 7
Baking varnishes with temperature index 180
Insulating varnishes containing solvents: Part 3
Specifications for individual materials, Section 8
Baking varnishes with temperature index 200
Insulating varnishes containing solvents: Part 3
Specifications for individual materials, Section 9
Baking varnishes with temperature index 130 for
magnetic core sheets
Recommended methods of tests for the
determination of dielectric properties of insulating
materials at frequencies above 300 MHz: Part 1
General
Synthetic resin bonded glass fibre (SRBGF) sheets
for electrical purposes
Epoxy resin systems for cast resin insulated power
and control cable joints and terminations up to and
including 11 kV
Methods of test for the determination of ionic
impurities in electrical insulating materials by
extraction with liquids
Recommended test methods for determining the
relative resistance of insulating materials to
breakdown by surface discharges
Method of test for determination of thermal
endurance of insulating varnishes: Part 1 Electric
strength method
Method of test for determination of thermal
endurance of insulating varnishes: Part 2
Measurement of loss of mass
Methods of test for determination of thermal
endurance of insulating varnishes: Part 3 Bond
strength by helical coil method
Varnished fabrics for electrical purposes: Part 1
Definitions and general requirements
Varnished fabrics for electrical purposes: Part 2
Methods of tests
Varnished fabrics for electrical purposes: Part 3
Specifications for individual materials, Section 1
IS 11298 : Part 1
IS 11298 : Part 2
IS 11298 : Part 3
: Sec 1
IS 11298 : Part 3
: Sec 2
IS 11298 : Part 3
: Sec 3
IS 11298 : Part 3
: Sec 4
IS 11298 : Part 3
: Sec 5
IS 11298 : Part 3
: Sec 8
IS 11654 : Part 1
IS 11654 : Part 3
: Sec 3
IS 13066
IS 11654 : Part 3
: Sec 4
IS 11654 : Part 3
: Sec 5
IS 11654 : Part 3
: Sec 6
Glass fabric backed varnished fabrics
Plastic films for electrical purposes: Part 1
Definitions and general requirements
Plastic films for electrical purposes: Part 2 Methods
of test
Plastic films for electrical purposes: Part 3
Specifications for individual materials, Section 1
Polypropylene film for capacitors
Plastic films for electrical purposes: Part 3
Specifications for individual materials, Section 2
Metallized polypropylene films
Plastic films for electrical purposes:Part 3
Specifications for individual materials,Section 3
Requirements for balanced biaxially oriented
Polyethylene Terephalate(PET) films used for
electrical insulation
Plastic films for electricl purposes: part 3
Specification for individula materials, Section 4
Requirements for polycabonate (PC) films used or
electrical insulation
Plastic Films for Electrc Purposes Part 3
Specification for Individual Materials Section 5-7
Requirements for Polyimide Films
Plastic films or electrical purposes: Part 3
Speciication for individual materils, Section 8
Requirements fluoroethylene (FEP) films used for
electricl insultion
Flexible insulating sleeving: Part 1 Definitions and
general requirements
Flexible insulating sleeving: Part 3 Specifications
for individual types of sleevings, Section 403 Glass
textile sleeving coated with acrylic based coating
high breakdown strength
Prepreg based on glass woven fabric for electrical
applications
Flexible insulating sleeving: Part 3 Specifications
for individual types of sleevings, Section 404 Glass
textile sleeving coated with acrylic based coating
medium breakdown strength
Flexible insulating sleeving: Part 3 Specifications
for individual types of sleevings, Section 405 Glass
textile sleeving coated acrylic based coating lower
Flexible insulating sleeving:Part 3 Specifications for
individual type of sleevings, Section 406 Glass
textile sleeving with PVC based coating high
breakdown strength
IS 11654 : Part 3
: Sec 7
IS 11654 : Part 3
: Sec 8
IS 11731 : Part 1
IS 11731 : Part 2
IS 11755
IS 11756
IS 12316 : Part 1
IS 12316 : Part 2
IS 12316 : Part 3
: Sec 1
IS 12316 : Part 3
: Sec 2
IS 12317 : Part 1
IS 12747 : Part 2
IS 12747 : Part 3
IS 13357
IS 13465 : Part 2
IS 13465 : Part 3
: Sec 1
Flexible insulating sleeving:Part 3 Specifications for
individual type of sleevings,Section 407 Glass
textile sleeving with PVC based coating medium
breakdown strength
Flexible insulating sleeving: Part 3 Specifications
for individual type of sleevings, Section 408 Glass
textile sleeving with PVC based coating-lower
breakdown strength
Methods of test for determination of the
flammability of solid electrical insulating materials
when exposed to an igniting source: Part 1
Horizontal specimen method
Methods of test for determination of flammability of
solid electrical insula
Method of test for the determination of electrical
resistance and resistivity of insulating materials at
elevated temperatures
Method of test for co-efficients of friction of plastic
film and sheeting for use as electrical insulation
Non-cellulosic papers for electrical purposes: Part 1
Definitions and general requirements
Non-cellulosic papers for electrical purposes: Part 2
Methods of test
Non-cellulosic papers for electricl purposes: Part 3
Requirements for individualmaterials, Section 1
Unfilled aramid (Aromatic Polyamide) Papers,
calendered
Non-cellulosic papers for electrical purposes: Part 3
Requirements for individul materials, Section 2
Unfilled aramid (Aromatic Polyamide) Paper,
uncalendered
Ceramic and glass insulating materials for
telecommunication and allied purposes: Part 1
General requirements and classification of ceramic
and glass insulating materials
Combined flexible materials for electrical insulation:
Part 2 Methods of test
Combined flexible materials for electrical insulation:
Part 3 Specifications for individual materials
Methods of grading and visual classification of
muscovite mica splittings
Solventless polymerisable resinous compounds used
for electrical insulation: Part 2 Methods of test
Solventless polymerisable resinous compounds used
for electrical insultion: Part 3 Specifications for
individual materials, Section 1 Unfilled epoxy
IS 13465 : Part 3
: Sec 2
IS 335
IS 9960
IS 13465 : Part 3
: Sec 3
IS 13465 : Part 3
: Sec 4
IS 13465 : Part 3
: Sec 5
IS 1866
IS 6103
IS 6104
IS 9434
IS 10593
IS 11549
IS 11697
IS 12026 : Part 1
IS 12463
IS 12819
IS 13067
IS 13072
IS 12026 : Part 2
resinous compounds
Solventless polymerisable resinous compounds used
for electrical insulation: Part 3 Specifications for
individul materils, Section 2 Quartz filled epoxy
resinous compounds
New insulating oils
Electrical grade castor oil for use as capacitor
impregnant
Solventless polymerisable resinous compounds used
for electrical insulation: Part 3 Specificaations for
individual materials, Section 3 Unfilled
polyurethane copounds
Solventless polymerisable resinous compounds used
for electrical insulation: Part 3 Specifications for
individual materials, Section 4 Filled polyurethane
compounds
Solventless polymerisable compounds used for
electrical insulation: Part 3 Specification for
individual materials, Section 5 Epoxy phynol
novolac resin
Code of practice for maintenance and supervision of
mineral insulating oil in equipment
Method of test for specific resistance (resistivity) of
electrical insulating liquids
Method of test for interfacial tension of oil against
water by the ring method
Guide for sampling and analysis of free and
dissolved gases and oil from oil-filled electrical
equipment
Method of evaluating the analysis of gases in oil
filled electrical equipment in service
Impregnating oils and compounds for paper
insulated cables upto 33 kV
Guide for determination of lightning impulse electric
strength of insulating liquids
Guide for the determination of the aromatic
hydrocarbon content of new insulating oils: Part 1
Asorption chromatographic method
Inhibited mineral insulating oils
Transformer oil feed stock (TOFS) base stock
(TOBS)
Impregnants for power capacitors
Sulphur hexafluoride for electrical purposes
Guide for the determination of the aromatic
hydrocarbon content of new insulating oils: Part 2
Infra red spectrophotometric method
IS 12422
IS 12475 : Part 1
IS 12475 : Part 2
IS 12958
IS 13155
IS 13631
IS 11182 : Part 1
IS 11182 : Part 3
: Sec 1
IS 11182 : Part 3
: Sec 2
IS 374
IS 1169
IS 2312
IS 2997
IS 11182 : Part 5
IS 11182 : Part 6
IS 14353
IS 12155
IS 731
IS 1445
IS 2486 : Part 1
Test method for oxidation stability of inhibited
mineral insulating oils
Gassing of insulating liquid under electric stress and
ionization: Part 1 Metho d of determination of
gassing rate under hydrogen atmosphere
Gassing of insulating liquids under electric stress
and ionization: Part 2 Method of determination of
gassing rate under nitrogen atmosphere
Oxidation stability of inhibited mineral insulating oil
by rotating bomb - Method of test
Method of test for carbon type analysis of mineral
oils by infra-red spectrophotometry
Method of test for detection and determination of
amtioxidant additives in insulating oils
Guide for evaluation of insulation systems of
electrical equipment: Part 1 Identification,
evaluation and ageing mechanisms
Guide for the evaluation of insulation systems of
electrical equipment: Part 3 Electrical endurance test
procedures, Section 1 General considerations and
evaluation procedures based on normal distributions
Guide for evaluation of insulation systems of
electrical equipments: Part 3 Electrical endurance
test procedures Section 2 evaluation procedure based
on extreme value distribution
Electric ceiling type fans and regulators
Electric pedestal type fans and regulators
Propeller type ac ventilating fans
Air circulator type electric fans and regulators
Guide for evaluation of insulation system of
electrical equipment: Part 5 Mechanical endurance
functional tests
Guide for the evaluation of insulation systems of
electrical equipment: Part 6 Performance evaluation
based on service experience and functional tests
Guide for determining compatibility between
enamelled winding wires and impregnating
compounds
General and safety requirements for fans and
regulators for household and similar purposes
Porcelain insulators for overhead power lines with a
nominal voltage greater than 1000 V
Porcelain insulators for overhead power lines with a
nominal voltage up to and including 1 000 V
Metal fittings of insulators for overhead power lines
with nominal voltage greater than 1000 V: Part 1
IS 2486 : Part 2
IS 2544
IS 3347 : Part 1 :
Sec 1
IS 3347 : Part 1 :
Sec 2
IS 4318
IS 5621
IS 8263
IS 3347 : Part 2 :
Sec 2
IS 3347 : Part 3 :
Sec 1
IS 3347 : Part 3 :
Sec 2
IS 3347 : Part 4 :
Sec 1
IS 3347 : Part 4 :
Sec 2
IS 3347 : Part 5 :
Sec 1
IS 3347 : Part 5 :
Sec 2
IS 3347 : Part 8 :
Sec 2
IS 4257 : Part 2
General requirements and tests
Insulator fittings for overhead power lines with
nominal voltage greater than 1 000 V: Part 2
Dimensional requirements
Porcelain post insulators for systems with nominal
voltage greater than 1000 V olts
Dimensions for porcelain transformer bushings for
use in normal and lightly pol luted atmospheres: Part
1 Up to and including 1 kV, Section 1 Porcelain
parts
Dimensions for porcelain transformer bushings for
use in nominal and lightly polluted atmospheres:
Part 1 Up to and including 1 kV, Section 2 Metal
parts
Solid core porcelain insulators for overhead traction
lines
Hollow insulators for use in electrical equipment
Methods for radio interference test on high voltage
insulators
Dimensions for porcelain transformer bushings for
use in lightly polluted atmospheres: Part 2 3.6 kV
bushings, Section 2 Metal parts
Dimensions for porcelain transformer bushings for
use in lightly polluted atmospheres: Part 3 17.5 kV
bushings, Section 1 Porcelain parts
Dimensions for porcelain transformer bushings for
use in lightly polluted atmospheres: Part 3 12 and
17.5 kV bushings, Section 2 Metal parts
Dimensions for porcelain transformer bushings for
use in lightly polluted atmospheres: Part 4 24 kV
bushings, Section 1 Porcelain parts
Dimensions for porcelain transformer bushings for
use in normal and lightly polluted atmospheres: Part
4 24 kV bushings, Section 2 Metal Parts
Dimensions for porcelain transformer bushings for
use in normal and lightly polluted atmospheres: Part
5 36 kV bushings, Section 1 Porcelain parts
Dimensions for porcelain transformer bushings for
use in normal and lightly polluted atmospheres: Part
5 36 kV bushings, Section 2 Metal parts
Dimensions for porcelain transformer bushings for
use in lightly polluted atmospheres: Part 8 52 kV
bushings: Section 2 Metal parts
Dimensions for clamping arrangements for porcelain
transformer bushings: Part 2 For 72.5 kV and 123
kV bushings
IS 8269
IS 8765
IS 10314
IS 10601
IS 7421
IS 7648
IS 7935
IS 8603 : Part 1
IS 8603 : Part 2
IS 8603 : Part 3
IS 9431
IS 10136
IS 12676
IS 13134
IS 13312
IS 1356 : Part 1
IS 2675
IS 5039
IS 5578
IS 7118
IS 8588 : Part 1
IS 8828
Methods for switching impulse tests on high voltage
insulators
Ceramic insulating materials for electrical purposes
Dimensions for ceramic bushings for terminals
Dimensions of terminals of high voltage switchgear
and controlgear
Porcelain bushings for alternating voltage up to and
including 1000 V
Silicone compound for application on high voltage
porcelain insulators
Insulator fittings for overhead power lines with a
nominal voltage up to and including 1000 V
Dimensions for porcelain transformer bushings for
use in heavily polluted atmospheres: Part 1 12 kV
and 17.5 kV bushings
Dimensions for porcelain transformer bushings for
use in heavily polluted atmospheres: Part 2 24 kV
buhsings
Dimensions for porcelain transformer bushings for
use in heavily polluted atmospheres: Part 3 36 kV
bushings
Indoor post insulators of organic material for
systems with nominal voltages greater than 1 000 V
up to and including 300 kV
Code of practice for selection of disc insulator
fittings for highest system voltages of 72.5 kV and
above
Oil impregnated paper insulated condenser bushings
- Dimensions and requirements
Guide for the selection of insulators in respect of
pollution conditions
Dimensions for oil filled porcelain transformer
bushings for use in medium polluted atmospheres
Electrical equipment of machine tools:Part 1
Electrical equipment of machines for general use
Enclosed distribution fuseboards and cutouts for
voltages not exceeding 1000 V
Distribution pillars for voltages not exceeding 1 000
volts
Guide for marking of insulated conductors
Recommendations for direction of movement for
control devices
Thermostatic bimetals: Part 1 General requirements
and methods of tests
Circuit-breakers for over current protection for
household and similar installations - specification
IS 10027
IS 10118 : Part 2
IS 10118 : Part 3
IS 10118 : Part 4
IS 11039
IS 13032
IS 13947 : Part 1
IS 13947 : Part 2
IS 13947 : Part 3
IS 9046
IS 9921 : Part 5
IS 3427
IS 7567
IS 8084
IS 9135
IS 9920 : Part 1
IS 9920 : Part 2
IS 9920 : Part 3
IS 9920 : Part 4
Composite units of air-break switches and rewirable
type fuses for voltages not exceeding 650 volt ac
Code of practice for selection, installation and
maintenance of Switchgear and controlgear: Part 2
Selection
Code of practice for selection, installation and
maintenance of switchgear and controlgear: Part 3
Installation
Code of practice for selection, installation and
maintenance of switchgear and controlgear: Part 4
Maintenance
Requirements for mounting on rails in switchgear
and controlgear installations
Miniature circuit breaker boards for voltage upto and
including 1 000 Volt ac
LV Switchgear and controlgear: Part 1 General rules
(superceding IS 2147 IS 4237 : 1982) (Requirements
covered and aligned with latest reauirements at IEC)
LV Switchgear and controlgear: Part 2 Circuit
breakers_(superceding IS 2516 (Parts 1 & 2/Section
1):1985 (Requirements covered and aligned with
latest requirements at IEC)
LV Switchgear and controlgear part 3 Switches,
disconnectors, switch-disconnectors and fuse
combination unit [superceding IS 4064(Parts 1 & 2)]
(Requirements covered and aligned with latest
requirements at
AC contactors of voltage above 1000 V upto and
including 11000 V
Alternating current disconnectors
A.C. Metal enclosed swtiichgear and controlgear for
rated voltaes above 1kv upto and including 52 kv
Automatic reclosing circuit-breakers (automatic
circuit reclosers for ac distribution system
Interconnecting busbars for ac voltage above 1 kV
upto and including 36 kV
Guide for testing of circuit breakers with respect to
out-of-phase switching
Switches and switch isolators for voltages above
1000 V: Part 1 General and definitions
Switches and switch isolators for voltages above
1000 V: part 2 Rating
Switches and switch isolators for voltages above
1000 V: Part 3 Design and construction
Switches and switch isolators for voltages above
1000 V: Part 4 Type tests and routine tests
IS 9921 : Part 1
IS 9921 : Part 2
IS 12661 : Part 1
IS 12729
IS 692
IS 694
IS 2465
IS 5831
IS 5950
IS 1255
IS 1554 : Part 1
IS 1554 : Part 2
IS 3961 : Part 1
IS 3961 : Part 2
IS 3961 : Part 3
IS 3961 : Part 4
IS 3961 : Part 5
IS 6380
IS 6474
IS 7098 : Part 1
IS 7098 : Part 2
IS 7098 : Part 3
IS 8130
Alternating current disconnectors (isolators) and
earthing switches for voltages above 1000 V: Part 1
General and definitions
Alternating current disconnectors (isolators) and
earthing switches for voltages above 1000 V: Part 2
Rating
High voltae motor-starter: Part 1 Direct-on-line (full
voltage) ac starters
General requirements for switchgear and controlgear
for voltages exceeding 1 000 V
Paper insulated lead-sheathed cables for rated
voltage upto and including 33 kv specification
PVC Insulated cables for working voltages upto and
including 1100 V
Cables for motor vehicles
PVC insulation and sheath of electric cables
Shot firing cables (for use other than in shafts)
Code of practice for installation and maintenance of
power cables upto and including 33 kV rating
PVC insulated (heavy duty) electric cables: Part 1
For working voltages upto and including 1 100 V
PVC insulated (heavy duty) electric cables:Part 2
For working voltages from 3.3 kV upto and
including 11 kV
Recommended current ratings for cables: Part 1
Paper insulated lead sheathed cables
Recommended current ratings for cables: Part 2
PVC insulated and PVC sheathed heavy duty cables
Recommended current ratings for cables: Part 3
Rubber insulated cables
Recommended current ratings for cables: Part 4
Polyethylene insulated cables
Recommended current ratings for cables: Part 5
PVC insulated light duty cables
Elastomeric insulation and sheath of electric cables
Polyethylene insulation and sheath of electric cables
Crosslinked polyethylene insulated PVC sheathed
cables: Part 1 For working voltage upto and
including 1 100 V
Crosslinked polyethylene insulated PVC sheathed
cables: Part 2 For working voltages from 3.3 kV
upto and including 33 kV
Cross-linked polyethylene insulated thermoplastic
sheathed cables: Part 3 For working voltages from
66 kV upto and including 220 kV
Conductors for insulated electric cables and flexible
IS 9857
IS 10418
IS 10810 : Part
10
IS 8308
IS 8309
IS 8337
IS 8394
IS 8438
IS 9553
IS 9646
IS 9968 : Part 1
IS 9968 : Part 2
IS 10435 : Part 1
IS 10462 : Part 2
IS 10606
IS 10810 : Part
14
IS 10810 : Part
30
IS 10810 : Part
31
IS 10810 : Part 1
IS 10810 : Part 2
IS 10810 : Part 3
cords
Welding cables
Drums for electric cables
Methods of test for cables:Part 10 Loss of mass test
Compression type tubular in-line connectors for
aluminium conductors of insulated cables
Compression type tubular terminal ends for
aluminium conductors of insulated cables
Performance requirements of compression joints of
aluminium conductors in insulated cables
Soldering and welding type terminal ends for
conductors of insulated cables
Moulds of cast resin based straight through joints for
cables for voltages upto and including 1100 V
Moulds suitable for cast resin based terminations for
cables for voltages up to and including 1000 V
Moulds suitable for cast resin-based joints for cables
for voltages upto and including 1 100 V
Elastomer insulated cables:Part 1 For working
voltages upto and including 1 100 V
Elastomer-insulated cables:Part 2 For working
voltages from 3.3 kV upto and including 11 kV
(superseding IS:434(Parts 1 and 2)
Inverted type cable end boxes for outdoor
termination suitable for paper insulated cables : Part
1 Belted type, multi-core cables upto and including
11 kV grade
Fictitious calculation method for determination of
dimensions of protective coverings of cables: Part 2
Paper insulated cables
Cast iron joint boxes for tee and branch trouser
joints suitable for paper insulated cables for voltages
upto and including 11 kV
Methods of test for cables:Part 14 Heat shock test
Methods of test for cables:Part 30 Hot set test
Methods of test for cables:Part 31 Oil resistance test
Methods of test for cables: Part 1 Annealing test for
wires used in conductors
Methods of test for cables: Part 2 Tensile test for
aluminium wires
Methods of test for cables: Part 3 Wrapping test for
aluminium wires
IS 10810 : Part 4
IS 10810 : Part 5
IS 10810 : Part 6
IS 10810 : Part 7
IS 10810 : Part 8
IS 10810 : Part 9
IS 10810 : Part
11
IS 10810 : Part
13
IS 10810 : Part
16
IS 10810 : Part
17
IS 10810 : Part
19
IS 10810 : Part
20
IS 10810 : Part
21
IS 10810 : Part
23
IS 10810 : Part
22
IS 10810 : Part
24
IS 10810 : Part
25
IS 10810 : Part
26
IS 10810 : Part
28
IS 10810 : Part
29
IS 10810 : Part
32
IS 10810 : Part
33
Methods of test for cables: Part 4 Persulphate test of
conductor
Methods of test for cables: Part 5 Conductor
resistance test
Methods of test for cables: Part 6 Thickness of
thermoplastic and elastomeric insulation and sheath
Methods of test for cables: Part 7 Tensile strength
and elongation at break of thermoplastic and
elastomeric insulation and sheath
Method of test for cables: Part 8 Breaking strength
and elongation at break for impregnated paper
insulation
Methods of test for cables: Part 9 Tear resistance for
paper insulation
Methods of test for cables:Part 11 Thermal ageing in
air
Methods of test for cables:Part 13 Ozone resistance
test
Methods of test for cables:Part 16 Accelerated
ageing test by oxygen pressure method
Methods of test for cables: Part 17 Tear resistance
test for heavy duty sheath
Methods of test for cables:Part 19 Bleeding and
blooming test
Methods of test for cables:Part 20 Cold bend test
Methods of test for cables:Part 21 Cold impact test
Methods of test for cables:Part 23 Melt-flow index
Methods of test for cables:Part 22 Vicat softening
point
Methods of test for cables:Part 24 Water soluble
impurities test of insulating paper
Methods of test for cables:Part 25 Conductivity of
water extract test of insulating paper
Methods of test for cables:Part 26 pH value of water
extract test of insulating paper
Methods of test for cables:Part 28 Water absorption
test (Electrical)
Methods of test for cables:Part 29 Environmental
stress cracking test
Methods of test for cables:Part 32 Carbon content
test for polyethylene
Methods of test for cables:Part 33 Water absorption
test (Gravimetric)
IS 10810 : Part
34
IS 10810 : Part
36
IS 10810 : Part
38
IS 10810 : Part
39
IS 10810 : Part
41
IS 10810 : Part
42
IS 10810 : Part
44
IS 10810 : Part
47
IS 10810 : Part
50
IS 10810 : Part
46
IS 10810 : Part
51
IS 10810 : Part
52
IS 10810 : Part
54
IS 10810 : Part
55
IS 10810 : Part
56
IS 10810 : Part
57
IS 10810 : Part
58
IS 10810 : Part
59
IS 10810 : Part
60
IS 10810 : Part
61
IS 10810 : Part
62
IS 10810 : Part
Methods of test for cables:Part 34 Measurement of
thickness of metallic sheath
Methods of test for cables:Part 36 Dimensions of
armouring material
Methods of test for cables:Part 38 Torsion test on
galvanized steel wires for armouring
Methods of test for cables:Part 39 Winding test on
galvanized steel strips for armouring
Methods of test for cables:Part 41 Mass of zinc
coating on steel armour
Methods of test for cables:Part 42 Resistivity test of
armour wires and strips and conductance test of
armour (wires/strips)
Methods of test for cables:Part 44 Spark test
Methods of test for cables:Part 47 Impulse test
Methods of test for cables:Part 50 Bending test
Methods of test for cables:Part 46 Partial discharge
test
Methods of test for cables:Part 51 Dripping test
Methods of test for cables:Part 52 Drainage test
Methods of test for cables:Part 54 Static flexibility
test
Methods of test for cables:Part 55 Abrasion test
Methods of test for cables: Part 56 Accelerated
ageing by the air-pressure method
Methods of test for cables: Part 57 Flexing test
Methods of test for cables: Part 58 Oxygen index
test - [IS 10810(Part 58]
Methods of test for cables: Part 59 Determination of
the amount of halogen acid gas evolved during
combustion of polymeric materials taken from
cables
Methods of test for cables: Part 60 Thermal stability
of PVC insulation and sheath
Methods of test for cables: Part 61 Flame retardant
test
Methods of test for cables: Part 62 Fire resistance
test for bunched cables
Methods of test for cables: Part 63 Smoke density of
63
IS 10877
IS 12943
S 267
IS 268
IS 2083
IS 2652
IS 11979
IS 12909
IS 13705
IS 14255
IS 14494
IS 586
IS 4268
IS 6303
IS 6648
IS 8144
IS 9128
IS 11675
IS 1145
IS 1146
IS 1651
IS 1846
IS 2512
IS 5154
IS 6071
IS 6304
electric cables under fire conditions
Moulds suitable for cast resin based indoor
terminations for cables for voltages 3.3 kV and
above and upto and including 11 kV
Brass glands for PVC cables
Inert cells
Leclanche type sack cells
Flashlights
Schedule of terminals for leclanche type primary
batteries
Moulds for cast resin based straight through joints
for cables for working voltages from 3.3 kV upto
and including 11 kV
Power cables dimensions for moulds for cast resin
based outdoor terminations for cables for voltages
above 1100 volts and upto and including 11000 volts
Performance requirements and type test for
transition joint of cables for working voltages from
11 kV up to and including 33 kV
Aerial Bunched Cables for working voltagess upto
and including 1100 Volts- specification
Elastomer insultated flexible cables for use in mines
(combined revision of IS:691 and IS:1026)
Leclanche type dry batteries for
telecommunications,signalling and general purposes
Air depolarized primary wet cells
General requirements and methods of tests for dry
cells and batteries
Carbon electrodes for dry cells and batteries
Multipurpose dry batteries
Heavy duty dry batteries
Button cells - Silver oxide
Lead-acid storage batteries for motor cycles, autorickshaws and similar vehicles
Rubber and plastic containers for lead-acid storage
batteries
Stationary cells and batteries, lead-acid type (with
tubular positive plates) (superseding IS:541)
Lead-acid aircraft batteries (aerobatic and nonaerobatic)
Miners cap lamp batteries (lead-acid type)
Lead-acid traction batteries
Synthetic separators for lead-acid batteries
Stationary batteries lead-acid type with pasted
positive plates
IS 7372
IS 7624
IS 7660
IS 8320
IS 9814
IS 10918
IS 12013
IS 13369
IS 13595
IS 14217
IS 14218
IS 14257
IS 1248 : Part 2
IS 1248 : Part 3
IS 1248 : Part 5
IS 1765
IS 2442
IS 6236
IS 7889
IS 1248 : Part 6
IS 1248 : Part 7
IS 1248 : Part 9
IS 2419
Lead-acid storage batteries for motor vehicles (first
revision of IS 7372) - Specification
Lead-acid starter batteries for diesel locomotives and
rail cars_
Lead-acid batteries for electric locomotives and
electrical multiple units
General requirements and methods of test for leadacid storage batteries
Lead-acid storage batteries for marine use
Vented type nickel cadmium batteries
Lead-acid batteries for 110 volts train lighting
system with monobloc containers
Stationary lead acid batteries (with tubular positive
plates) in monobloc containers
Silver-oxide-zinc batteries for aircraft
Miner's cap lamp batteries (alkaline type)
Sealed cylindrical type rechargeable nickel cadmium
cells
Lead-acid storage batteries for motor vehicles with
light weight and high cranking performance Specification
Direct acting indicating analogue electrical
measuring instruments and their accessories: Part 2
Ammeters and voltmeters
Direct acting indicating analogue electrical
measuring instruments and their accessories: Part 3
Wattmeters and varmeters
Direct acting indicating analogue electrical
measuring instruments and their accessories: Part 5
Phase meters, power factor meters and synchroscope
Direct current potentiometers
dc moving coil galvanometers
Direct recording electrical measuring instruments
Vibration galvanometers
Direct acting indicating analogue electrical
measuring instruments and their accessories: Part 6
Ohmmeters (impedance meters) and conductance
meters
Direct acting indicating analogue electrical
measuring instruments and their accessories: Part 7
Multifunction instruments
Direct acting indicating analogue electrical
measuring instruments and their accessories: Part 9
Test methods
Dimensions for panel mounted indicating and
recording electrical instruments
IS 2992
IS 3107
IS 3602
IS 3635
IS 3636
IS 7890
IS 7914
IS 8143
IS 8160
IS 8197
IS 8525
IS 8945
IS 9051
IS 9223
IS 11067
IS 9249 : Part 1
IS 9249 : Part 2
IS 11212
IS 11287
IS 11576
IS 11599
IS 11994
IS 12312
IS 12784 : Part 1
IS 7700
IS 8530
IS 9792 : Part 1
Insulation resistance testers, hand operated (magneto
generator type)
Portable multi purpose direct acting electrical
indicating instruments
Recommendations for the design of scales and
indexes for indicating instruments for scales of 1 to
2 percent resolution
Methods of test for resistance of metallic electrical
resistance material
Method of test for temperature co-efficient of
precision resistor wires
Ballistic galvanometers
Standard cells
Plugs and keys for resistance boxes
Tangent galvanometers
Terminal markings for electrical measuring
instruments and their accessories
Recommendations for design of linear scales and
indexes for indicating instruments to be read to 0.331.25 percent resolution.
Electrical measuring instruments for explosive gas
atmospheres
Rheostats
Portable earth resistance meters
Direct current standard resistors
Safety requirements for indicating and recording
electrical measuring instruments and their
accessories: Part 1 Common safety requirements for
instruments
Safety requirements for indicating and recording
electrical measuring instruments and their
accessories: Part 2 Safety requirements for
instruments using a mains supply
Direct current resistive volt ratio boxes
Bridge insulation testers (Magneto generator type)
Barlow's wheel
Portable ac clip-on-ammeters
Portable insulation resistance tester (mains operated)
Inductive voltage dividers
Electrical measuring transducers for converting ac
electrical quantities into dc electrical quantities: Part
1 General purpose transducers
Quadrature phase-shifting voltage transformers
Maximum demand indicators (class 1)
Guide for testing, calibration and maintenance of ac
IS 11448
IS 12346
IS 13010
IS 13779
IS 14390
IS 2412
IS 2667
IS 3419
IS 14372
IS 14415
IS 14451 : Part 1
IS 1293
IS 3010 : Part 1
IS 3010 : Part 2
IS 3480
IS 3837
IS 3854
IS 4160
IS 4615
IS 4649
IS 4949
IS 5133 : Part 1
IS 5133 : Part 2
IS 6538
IS 6896
IS 6965
IS 325
IS 900
electricity meters: Part 1 Single phase whole current
watthour meters, Class 2.0
Application guide for ac electricity meters
Testing equipment for ac electrical energy meters
AC watt-hour meters, Class 0.5, 1 and 2
AC static watthour meters (Class 1 and 2)
Var-hour meters, Class 3.0 [Superseding IS 722
(Part 6):1980]
Link clips for electrical wiring
Fittings for rigid steel conduits for electrical wiring
Fittings for rigid non-metallic conduits
Volt-ampere hour meters for full power factor range
[superseding IS:722(Part 7/Sections 1, 2 and 3)1987]
Volt-Amphere hour meters for restricted power
factor range - specification [superseding IS:722 (Part
5):1980
Telemetering of consumption and demand (Part 1)
impulse transmitting and receiving devicces
Plugs and socket outlets of rated voltage up to and
including 250 volts and rated current up to and
including 16 amperes
Appliance-connectors and appliance-inlets (nonreversible three-pin type): Part 1 Appliance
connectors
Appliance-connectors and appliance-inlets(nonreversible three-pin type: Part 2 Appliance inlet
Flexible steel conduits for electrical wiring
Accessories for rigid steel conduits for electrical
wiring
Switches for domestic and similar purposes
Interlocking switch socket outlet
Switch socket outlets (non-interlocking type)
Adaptors for flexible steel conduits
2 Amp switches for domestic and similar purposes
Boxes for enclosure of the electrical accessories:Part
1 Steel and cast iron boxes
Boxes for the enclosure of electrical accessories:Part
2 Boxes made of insulating material
Three-pin plugs made of resilient material
Connectors (two-way) for railway coach wiring
Switches for use in railway coaching stock
Three-phase induction motors
Code of practice for installation and maintenance of
induction motors
IS 9537 : Part 1
IS 9537 : Part 2
IS 9537 : Part 3
IS 996
IS 2223
IS 2253
IS 2254
IS 2968
IS 2972 : Part 1
IS 2972 : Part 2
IS 2972 : Part 3
IS 3682
IS 4029
IS 4665 : Part 1
IS 4665 : Part 2
IS 4691
IS 4722
IS 5422
IS 7132
IS 7306
IS 7816
IS 7538
IS 8151
IS 8789
IS 9320
IS 9582 : Part 1
IS 9628
IS 9670
IS 11537
Conduits for electrical installations: Part 1 General
requirements
Conduits for electrical installations:Part 2 Rigid steel
conduits (superseding IS:1653)
Conduits for electrical installations: Part 3 Rigid
plain conduits of insulating materials (superseding
IS:2509)
Single-phase small ac and universal electric motors
Dimensions of flange mounted ac induction motors
Designation for types of construction and mounting
arrangement of rotating electrical machines
Dimensions of vertical shaft motors for pumps
Dimensions of slide rails for electric motors
Textile motors: Part 1 Loom motors
Textile motors: Part 2 Card motors
Textile motors: Part 3 Spinning frame motors
Flameproof ac motors for use in mines
Guide for testing three-phase induction motors
Portable electric motor-operated_tools: Part 1
General requirements and tests
Portable electric motor-operated tools:Part 2
Specific requirements for tools
Degrees of protection provided by enclosure for
rotating electrical machinery
Rotating electrical machines
Turbine type generators
Guide for testing synchronous machines
Methods for determining synchronous machin
quantities from tests
Guide for testing insulation resistance of rotating
machines
Three-phase squirrel cage induction motors for
centrifugal pumps for agricultural applications
Single-speed three-phase induction motors for
driving lifts
Values of performance characteristics for threephase induction motors
Guide for testing of direct current (dc) machines
Single-phase electric motors for definite purposes:
Part 1 Domestic laundry machine motors
Three-phase induction motors with type of
protection 'n'
Direct current micro motors for cassette tape
recorders and other applications
Centrifugal switch for single phase induction motors
IS 12065
IS 12066
IS 12642
IS 12824
IS 13079
IS 13107
IS 13364 : Part 1
IS 13364 : Part 2
IS 14197
IS 14376
IS 14377
IS 13586
IS 14195
IS 14196
IS 14198 : Part 1
IS 14198 : Part 2
IS 14222
IS 14568 : Part 2
IS 14578
IS 14582
IS 1180 : Part 1
IS 1180 : Part 2
Permissible limits of noise level for rotating
electrical machines
Three-phase induction motors for machine tools
Brush-holders for slip rings group R-Type RA
Type of duty and classes of rating assigned to
rotating electrical machines
Stepping Motors
Guide for measurement of winding resistance of an
ac machine during operation at alternating voltage
Specification for ac generators driven by
reciprocating internal combustion engine: Part 1
Rated up to 20 kVA
Specification for ac generators driven by
reciprocating internal combustion engine: Part 2
Rated above 20 kVA and upto 1250 kVA
Code for model acceptance tests of hydraulic
turbines
Brush holders for electrical machines
Induction motors for fan used in air-conditioning
and ventilation
Definitions and nomenclature for carbon brushes,
brush holders, commutators and slip rings for
rotating electrical machinery (superseding
IS:3003(Part 1)-1977)
Brush-holders for electrical machines guide to the
measurement of the static thrust applied to brush
Definitions and terminology of brush-holders for
electrical machines
Rules for steam turbines thermal acceptance tests Method A
Rules for steam turbines thermal aceptance tests Method B
Impulse withstand levels of rotating ac machines
with form wound stator coils
Dimensions and output series for rotating electrical
machines Part 2 Frame numbers 355 to 1000 and
flange numbers 1180 to 2360
Three-phase induction motors for use in nuclear
power plants
Single-phase small a.c. electric motors for
centrifugal pumps for agricultural applications
Outdoor type three-phase distribution transformers
up to and including 100 kVA 11 kV:Part 1 Nonsealed type
Outdoor type three-phase distribution transformers
up to and including 100 kVA 11 kV:Part 2 Sealed
IS 2026 : Part 1
IS 2026 : Part 2
IS 2772
IS 3151
IS 5142
IS 5553 : Part 2
IS 2026 : Part 3
IS 2026 : Part 4
IS 2026 : Part 5
IS 5553 : Part 3
IS 5553 : Part 4
IS 5553 : Part 5
IS 5553 : Part 6
IS 5553 : Part 7
IS 5553 : Part 8
IS 6600
IS 8447
IS 8468
IS 8478
IS 9147
IS 9815 : Part 1
IS 10028 : Part 2
IS 10161
IS 10561
IS 13956
IS 13964
IS 10028 : Part 3
type
Power transformers: Part 1 General
Power transformers: Part 2 Temperature-rise
Non-flameproof mining transformers for use below
ground
Earthing transformers
Continuously variable voltage auto transformers
Reactors: Part 2 Shunt reactors
Power transformers: Part 3 Insulation level and
dielectric tests
Power transformers: Part 4 Terminal
marking,tappings and connectioins
Power Transformer: Transformer/Reactor bushings
minimum external clearance in air-specification
Reactors: Part 3 Current limiting reactors and neutral
earthing reactors
Reactors: Part 4 Damping reactors
Reactors: Part 5 Tuning reactors
Reactors: Part 6 Earthing transformers (Neutral
couplers)
Reactors: Part 7 Arc supression reactors
Reactors: Part 8 Smoothing reactors
Guide for loading of oil immersed transformers
Manually operated voltage regulators for domestic
use
On-load tap changers
Application guide for on-load tap changers
Cable sealing boxes for oil immersed transformers
suitable for paper insulated lead sheathed cables for
highest system voltages from 12 kV upto and
including 36 kV
Servo-motor operated automatic line voltage
correctors: Part 1 Correctors for single phase
applications
Code of practice for selection, installation and
maintenance of transformers; Part 2 Installation
(superseding IS:1886)
Moving coil voltage regulators
Application guide for power transformers
Testing transformers
Methods of measurement of transformer and reactor
sound levels
Code of practice for selection, installation and
maintenance of transformers: Part 3 Maintenance
(superseding IS:1886)
IS 8992
IS 9021
IS 9029
IS 9050
IS 9080 : Part 2 :
Sec 1
IS 9080 : Part 2 :
Sec 2
IS 9080 : Part 2 :
Sec 3
IS 9080 : Part 2 :
Sec 4
IS 9080 : Part 4
IS 10122
IS 10215
IS 11692
IS 10098
IS 11712
IS 12188
IS 12306
IS 2053
IS 2054
IS 2055
IS 2056
IS 2711
IS 2806
Test methods for induction furnaces with submerged
channels
General test conditions for industrial electro-heating
equipment
Methods of tests for batch furnaces with metallic
heating resistors
Nominal dimensions of cylindrical machines
graphite electrodes with threaded sockets and
connecting pins for use in electric arc furnaces
Safety requirements in electro-heat installations: Part
2 Particular requirements for resistance heating
equipment, Section 1 Protection in direct resistance
heating installations
Safety requirements in electro-heat installations: Part
2 Particular requirements for resistance heating
equipment, Section 2 Protection in indirect
resistance heating installations
Safety reqirements in electro-heat installations:Part 2
Particular requirements for resistance heating
equipment, Section 3 Protection in potassium and
sodium nitrate and nitrite bath furnaces
Safety requirements in electro-heat installations: Part
2 Particular requirements for resistance heating
equipment, Section 4 Protection in installations used
for drying varnishes and other similar products
Safety requirements in electro-heat installations: Part
4 Particular requirements for arc furnace
installations
Methods of tests for crucible induction furnaces
Methods of tests for submerged arc furnaces
Method of tests for electro-slag remelting furnaces
General requirements for electric infra-red emitters
for heating purposes
Safety requirements for electro-slag remelting
furnaces
Electric direct-arc melting furnaces
Methods of test for direct arc melting furnaces
Thermocouple pyrometers
Referance tables for nickel/chromiumnickel/aluminium thermocouples
Reference tables for platinum/rhodium-platinum
thermocouples
Reference tables for copper-constantan
thermocouples
Direct reading pH meters
Guide to electrical resistance thermometry
IS 3944
IS 4309
IS 5883
IS 6720
IS 6804
IS 7722
IS 7728
IS 7988
IS 8018
IS 8457
IS 8784
IS 8824 : Part 1
IS 8935
IS 9319
IS 8493
IS 8824 : Part 2
IS 9334
IS 9347
IS 9463
IS 10144
IS 10189 : Part 1
IS 10189 : Part 2
: Sec 1
IS 10189 : Part 2
: Sec 2
IS 10625
IS 10639
IS 11222
IS 12051
IS 12434
Methods for determination of flowtime by use of
flow cups
Method of measurement on direct reading pH meters
Nickel resistance thermometer elements
Referance tables for plantinum/30 percent rhodiumplatinum/6 percent rhodium thermocouples
Glass-electrodes for direct reading pH meters
Analogue pneumatic signals for process control
systems
Analogue dc current signals for process control
systems
Referance tables for chromel-kopel thermocouples
Platinum and platinum alloy wires for
thermocouples elements
Tyre pressure gauges for automobiles (Pocket type)
Thermocouple compensating cables
Electrical moisture meters: Part 1 For foodgrains
Electric solenoid operated actuators
Electronic self-balancing potentiometric indicators
and recorders
Analogue dc voltage signals for industrial process
measurements and control systems
Electrical moisture meters: Part 2 For jute
(conductivity type)
Electric motor operated actuators
Charts for recording instruments
Electronic self-balancing bridge indicators and
recorders
Electronic speed limiters for diesel vehicles
Industrial process control valves: Part 1 General
requirements and tests
Industrial process control valves: Part 2 Flow
capacity, Section 1 Sizing equations for
incompressible fluid flow under installed conditions
Industrial process control valves: Part 2 Flow
capacity Secton 2 Sizing equations for compressible
fluid flow under installed conditions
Reference tables for nickel/chromium-copper/nickel
(chromel-constantan) thermocouples
Disappearing filament type optical pyrometers
Dials, scales and indexes for indicating analogue
measuring instruments
Reference tables for nickel-chromium-silicon
(Nicrosil/Nisil) Type N Thermocouples
Coating/plating thickness tester, destructive type
IS 12554 : Part 1
IS 12555
IS 12579
IS 2071 : Part 3
IS 12556
IS 13122 : Part 2
IS 14254 : Part 1
SP 39
IS 2071 : Part 1
IS 2165 : Part 1
IS 2165 : Part 2
IS 3716
IS 8690
SP 30
SP 31
IS 2309
IS 2551
IS 3043
IS 5216 : Part 1
IS 7689
IS 8923
IS 1851
IS 2635
IS 2641
IS 7752 : Part 1
IS 8061
Non-destructive coating thickness testing
instruments: Part 1 Eddy current instruments
Signal conditioning devices for process control
systems
Base-metal mineral insulated thermocouple cables
and thermocouples
Methods of high voltage testing: Part 3 Measuring
devices
Binary direct voltage signals for process
measurement and control systems
Transmitters for use in industrial process control
systems: Part 2 Guidance fr installation, inspection
and routine testing
Programmable controller: Part 1 General
information
Special Publication - Guide for insulation
coordination within low voltage systems
High voltage testtechniques: Part 1 General
definitions and test requirements
Insulation coordination: Part 1 Phase to earth
insulation coordination principles and rules
Insulation coordination: Part 2 Phase to phase
insulation coordination principles and rules
Application guide for insulation coordination
Application guide for measuring devices for high
voltage testing
Special Publication - National Electrical Code
Special Publication - Chart on treatment for electrilc
shock
Code of practice for the protection of buildings and
allied structures against lightning
Danger notice plates
Code of practice for earthing
Guide for safety procedures and practices in
electrical work: Part 1 General
Guide for the control of undesirable static electricity
Warning symbol for dangerous voltages
Single Operator type arc welding transformers
dc electric welding generators
Electrical welding accessories
Guide for improvement of power factor in consumer
installation:Part 1 Low and medium supply voltages
Code of practice for design, installation and
maintenance of service lines upto and including 650
V
IS 8437 : Part 1
IS 8437 : Part 2
IS 8884
IS 8969
IS 4559
IS 4804 : Part 1
IS 4804 : Part 3
IS 6008
IS 7931 : Part 1
IS 7931 : Part 2
IS 7931 : Part 3
IS 9604
IS 13339
IS 2148
IS 8804
IS 4051
IS 4821
IS 5572
IS 5679
IS 6381
IS 6789
IS 7389 : Part 1
Guide on effects of current passing through human
body: Part 1 General aspects
Guide on effects of current passing through human
body: Part 2 Special aspects
Code of practice for the installation of electric bells
and call system
Code of practice for installation and maintenance of
impulse and electronic master and slave electric
clock systems
Single operator rectifier type dc arc welding power
source
Resistance welding equipment : Part 1 Single phase
transformers
Resistance welding equipment: Part 3 Single phase
spot and projection welding machines
Single operator ac\dc arc welding power source
Automatic and semi-automatic welding equipment
with self-adjusting arcs (MIG\MAGprocesses): Part
1 dc welding generator power source
Automatic and semi-automatic welding equipment
with self-adjusting arcs (MIG/MAG Processes): Part
2 Transformer rectifier power source
Automatic and semi-automatic welding equipment
with self-adjusting arcs (MIG/MAG Processes): Part
3 Welding gun and ancillary equipment
Tungsten-inert gas (TIG) welding equipment
Multi-operator type arc welding transformers
Flameproof enclosures for electrical apparatus
Plugs, sockets and terminal arrangements and
welding cable connectors for manual welding
equipment
Code of practice for installation and maintenance of
electrical equipment in mines
Cable glands and cable sealing boxes for use in
mines
Classification of hazardous areas (other than mines)
having flammable gases and vapours for electrical
installation
Miners' cap lamp assemblies (incorporating lead
acid type batteries)
Construction and testing of electrical apparatus with
type of protection 'e'
Bolted flameproof cable coupler and adaptors
Pressurized enclosures of electrical apparatus for use
in explosive atmospheres: Part 1 Pressurized
enclosures with no internal source of flammable gas
IS 7693
IS 7820
IS 8289
IS 9166
IS 9559
IS 9570
IS 9735
IS 9836
IS 11005
IS 418
IS 897
IS 10406
IS 11064
IS 12315 : Part 1
IS 12315 : Part 2
IS 14154 : Part 1
IS 14154 : Part 2
IS 1258
IS 1534 : Part 1
IS 1569
IS 1901
IS 2261
IS 2262
or vapour
Oil immersed electrical apparatus for use in
explosive gas atmospheres
Method of test for ignition temperatures
Electrical equipment with type of protection 'n'
Spark test apparatus for intrinsically safe circuits
Guide for selection of electrical and electronic
equipment for coal mines
Classification of flammable gases or vapours with
air according to their maximum experimental safe
gaps and minimum igniting currents
Method of test for ascertainment of maximum
experimental safe gap
Exploders
Dust tight ignition proof enclosures of electrical
equipment
Tungsten filament general service electric lamps
Tungsten filament electric lamps for railway rolling
stock
Intrinsically safe transformers primarily for bell
signalling circuits
Guide for construction and use of rooms or buildings
protected by pressurization for installation of
electrical apparatus for explosive gas atmospheres
Methods of determining the minimum ignition
temperature of dusts: Part 1 Dust layer on a heated
surface at a constant temperature
Methods of determining the minimum ignition
temperature of dusts: Part 2 Dust cloud in a furnance
at a constant temperature
Electrical apparatus with protection by enclosure for
use in the presence of combustible dusts: Part 1
Specification for apparatus
Electrical apparatus with protection by enclosure for
use in presence of combustible dust: Part 2 Guide to
elecction, installation and maintenance
Bayonet lamp holders
Ballasts for fluorescent lamps:Part 1 For switch start
circuits
Capacitors for use in tubular fluorescent high
pressure mercury and low pressure sodium vapour
discharge lamp circuit
Visual indicator lamps
Lamps for flashlights
Transformers for high voltage luminous discharge
tubes
IS 2407
IS 2418 : Part 4
IS 2592
IS 2596
IS 3323
IS 3324
IS 6616
IS 6701
IS 7013
IS 8685
IS 8901
IS 8913
IS 9206
IS 9589
IS 9900 : Part 1
IS 9900 : Part 2
IS 9900 : Part 3
IS 9900 : Part 4
IS 9974 : Part 1
IS 9974 : Part 2
IS 10276 : Part 1
IS 10276 : Part 2
IS 11980
IS 12948
IS 1777
IS 2672
IS 3287
IS 12449 : Part 2
Photometric integrators
Tubular fluorescent lamps for general lighting
service: Part 4 Go and no-go gauges for G-5and G13 bi-pin caps
Lamps for lighting on board ships
Bulbs (lamps)for miners cap lamps
Bi-pin lampholders for tubular fluorescent lamps
Holders for starters for tubular fluorescent lamps
Ballasts for high pressure mercury vapour lamps
Tungsten filament miscellaneous electric lamps
Radio dial lamps
Aircraft lamps
Lamps for aerodrome lighting fittings
Methods of measurement of lamp cap temperature
rise
Dimensions of caps for tungsten filament general
service electric lamps
Electric lamps for railway signalling
High pressure mercury vapour lamps: Part 1
Requirements and test (Superseding IS:2183 and
IS:7023)
High pressure mercury vapour lamps: Part 2
Standard lamp data sheets (superseding IS: 2183 and
IS: 7023)
High pressure mercury vapour lamps : Part 3
Dimensions of lamp caps (superseding IS:2183 and
IS:7023)
High pressure mercury vapour lamps : Part 4 Go and
no-go gauges of lamp caps (superseding IS:2183 and
IS:7023)
High pressure sodium vapour lamps :Part 1 General
requirements and tests
High pressure sodium vapour lamps : Part 2
Standard lamp data sheets
Edison screw lampholders : Part 1 Requirements and
tests
Edison screw lampholders : Part 2 Standard data
sheets for lamp holders and gauges
Lamp (bulb) cycle dynamo
Tungsten halogen lamps (non-vehicle)
Industrial luminaire with metal reflectors
Code of practice for library lighting
Industrial lighting fittings with plastic reflectors
Starting devices (other than glow starters): Part 2
Performance requirements
IS 12897
IS 13021 : Part 1
IS 1913 : Part 1
IS 1944 : Part 5
IS 1944 : Part 6
IS 1944 : Part 7
IS 2206 : Part 1
IS 2206 : Part 2
IS 2206 : Part 3
IS 2206 : Part 4
IS 3528
IS 3646 : Part 1
IS 4013
IS 4347
IS 5077
IS 6665
IS 3646 : Part 3
IS 7537
IS 7569
IS 7678
IS 7785 : Part 1
IS 7785 : Part 2
IS 7785 : Part 3
IS 7785 : Part 4 :
Testing of tungsten filament for general services
incondesent lamps-guide
AC supplied electronic ballasts for tubular florescent
lamps: Part 1 General and safety requirements
General and safety requirements for luminaires: Part
1 Tubular fluorescent lamps
Code of practice for lighting of public thoroughfare:
Part 5 Lighting for grade separated junctions,
bridges and elevated roads (Group D)
Code of practice for lighting of public thoroughfare:
Part 6 Lighting for towns and city centres and areas
of civic importance (Group E)
Code of practice for lighting of public thoroughfare:
Part 7 Lighting for roads with special requirements
(Group F)
Flameproof electric lighting fittings: Part 1 Wellglass and bulkhead types
Flameproof electric lighting fittings: Part 2 Fittings
using glass tubes
Flameproof electric lighting fittings: Part 3 Fittings
using plastic tubes (Group I only)
Flameproof electric lighting fittings: Part 4 Portable
flameproof hard lamps
Waterproof electric lighting fittings
Code of practice for interior illumination: Part 1
General requirements and recomendations for
welding interiors
Dust-tight electric lighting fittings
Code of practice for hospital lighting
Decorative lighting outfits
Code of pratice for industrial lighting
Code of practice for interior illumination: Part 3
Calculation of coefficients of utilization by the BZ
method
Road traffic signals
Cast acrylic sheets for use in luminaires
Method of photometric testing of incandescent type
luminaires for general lighting service
Elevated type aerodrome lighting fittings: Part 1
General requirements
Elevated type aerodrome lighting fittings: Part 2
Fixed focus high intensity bi-directional runway
edge lighting fittings
Elevated type aerodrome lighting fittings: Part 3
Low intensity runway edge lighting fittings
Elevated type aerodrome lighting fittings: Part 4
Sec 1
IS 7785 : Part 5 :
Sec 1
IS 7785 : Part 6 :
Sec 1
IS 8030
IS 8224
IS 9583
IS 10322 : Part 1
IS 10894
IS 12290
IS 12291
IS 3534
IS 10322 : Part 5
: Sec 1
IS 10322 : Part 5
: Sec 3
IS 10322 : Part 5
: Sec 4
IS 10322 : Part 5
: Sec 5
IS 11071 : Part 2
IS 11071 : Part 3
IS 11071 : Part 4
IS 11472 : Part 1
IS 13383 : Part 1
IS 13383 : Part 2
IS 13383 : Part 3
IS 1860
IS 4666
IS 6383
Angle of approach lights, Section 1 Visual approach
slope indicators
Elevated type aerodrome lighting fittings: Part 5
Approach lighting fittings, Section 1 High intensity
elevated approach lighting fittings
Elevated type aerodrome lighting fittings: Part 6
Taxiway lights, Section 1 Low intensity omnidirectional elevated taxiway lighting fittings
Luminaires for hospitals
Electric lighting fittings for division 2 areas
Emergency lighting units
Luminaires: Part 1 General requirements
Code of practice for lighting of educational
institutions
Isolating transformers for airport lighting
Constant current regulators for airport systems
Outline dimensions of electric lifts
Luminaires: Part 5 Particular requirements, Section
1 General purpose luminaires
Luminaires: Part 5 Particular requirements, Section
3 Luminaires for road and street lighting
(superseding IS:2149)
Luminaires: Part 5 Particular requirements, Section
4 Portable general purpose luminaires
Luminaires: Part 5 Particular requirements, Section
5 Flood light (superseding IS:1947)
Inset type aerodrome lighting fittings: Part 2
Runway centre line lighting fittings
Inset type aerodrome lighting fittings: Part 3
Approach lighting fittings
Inset type aerodrome lighting fittings: Part 4
Touchdown zone lighting fittings
Artificial day light for the assessment of colours:
Part 1 Illuminant for colour matching and colour
appraisal
Methods of photometry of luminaires: Part 1 For use
in interior lighting
Methods of photometry of luminaires: Part 2 For
road and street lighting
Methods of photometry of luminaires: Part 3 For
flood lighting
Code of Practice for installation, operation and
maintennannce of electric passenger and goods lifts
Electric passenger and goods lifts
Electric service lifts
IS 7759
IS 8216
IS 9803
IS 9878
IS 10191
IS 10448
IS 10913
IS 11615
IS 11633
IS 11706
IS 14671
IS 10242 : Part 1
: Sec 1
IS 10242 : Part 2
: Sec 1
IS 10242 : Part 2
: Sec 2
IS 10242 : Part 3
: Sec 1
IS 10242 : Part 3
: Sec 2
IS 10242 : Part 3
: Sec 3
IS 10242 : Part 3
: Sec 4
IS 10242 : Part 3
: Sec 6
IS 8200
IS 12834
IS 2993
IS 10242 : Part 3
: Sec 10
IS 10242 : Part 3
: Sec 11
IS 10242 : Part 3
: Sec 12
Lift door locking devices and contacts
Guide for inspection of lift wire ropes
Buffers for electric passenger and good lifts
Safety gears and governors for electric passenger
and goods lifts
Car and counterweight guide rails, guide rail
supports and fastenings for lifts
Retiring cam for electric passenger and goods lifts
Brakes for electric passenger and goods lifts
Car and counterweight guide shoes for electric
passenger and goods lifts
Lift doors
General requirements of car-frame for electric
passangers and goods lift
Code of practice for instalation and maintenance of
hydraulic lifts
Electrical installations in ships: Part 1 General
Section 1 Definitions and general requirements
Electrical installations in ships: Part 2 System
design, Section 1 General
Electrical installations in ships: Part 2 System
design, Section 2 Protection
Electrical installations in ships: Part 3 Equipment,
Section 1 Generators and motors
Electrical installations in ships: Part 3 Equipment,
Section 2 Switchgear and controlgear assemblies
Electrical installations in ships: Part 3 Equipment,
Section 3 Transformers for power and lighting
Electrical installations in ships: Part 3 Equipment,
Section 4 Semi-conductor convertors
Electrical installations in ships: Part 3 Equipment,
Section 6 Luminaires and accessories
Toggle switches used in traction application
Solar photovoltaic energy systems-Terminology
A.C. motor capacitors
Electrical installations in ships: Part 3 Equipment,
Section 10 General construction and test
requirements for low voltage shipboard power
cables
Electrical installations in ships: Part 3 Equipment,
Section 11 Insulating materials for shipboard power
cables
Electrical installations in ships: Part 3 Equipment,
Section 12 Choice and installation of cables for low
voltage systems
IS 10242 : Part 3
: Sec 13
IS 10242 : Part 3
: Sec 19
IS 10242 : Part 3
: Sec 25
IS 10242 : Part 3
: Sec 26
IS 10242 : Part 4
IS 10242 : Part 5
: Sec 1
IS 9348
IS 9835
IS 3895
IS 4540
IS 10242 : Part 5
: Sec 3
IS 10242 : Part 5
: Sec 4
IS 14479
IS 14577
IS 12762 : Part 1
IS 12762 : Part 2
IS 12763
IS 14153
IS 14244
IS 14286
Electrical installations in ships: Part 3 Equipment,
Section 13 Single and multicore cables with
extruded solid insulation for rated voltage 0.6/1 kV
Electrical installations in ships: Part 3 Equipment,
Section 19 Sheathing materials for
telecommunication and power shipboard cables
Electrical installations in ships: Part 3 Equipment,
Section 25 Shipboard telecommunication cables and
radiofrequency cables: General instrumentation,
control and communication cables
Electrical installations in ships: Part 3 Equipment,
Section 26 Shipboard telecommunication cables:
Shipboard multicore cables for control circuits
Electrical installations in ships: Part 4 Installation
and test of completed installation
Electrical installations in ships: Part 5 Special
features, Sec 1 Electric propulsion plant
Coupling capacitor and capacitor dividers
Series capacitors for power systems
Monocrystalline semiconductor rectifier cells and
stacks
Monocrystalline semiconductor rectifier assemblies
and equipment
Electrical installations in ships: Part 5 Special
features Sec 3 ac supply system with voltage in the
range above 1 kV up to and including 11 kV
Electrical installations in ships : Part 5 Special
fetures, Section 4 Control and instruments
Electromagnetic compatibility of electrical and
electronic installation in ships
Short-circuit current evaluation with special regard
to rated short-circuit capacity of circuit-breakers in
installations in ships
Photovoltaic devices: Part 1 Measurement of
photovoltaic current voltage characteristics
Photovotaic devices: Part 2 Requirement for
reference solar cells
Procedures for temperature and irradiance
corrections to measured I-V characteristics of
crystaline silicon photovoltaic devices
Guide for General Description of Photovoltaic (PV)
Power Generating systems
Characteristic parameters of stand alone
photovoltaic (PV) systems
Qualification test procedures for crystaline silicon
photovoltaic modules
IS 9251
IS 11548
IS 12677
IS 13648
IS 13666
IS 3070 : Part 3
IS 3136
IS 12672
IS 12730
IS 13340
IS 13341
IS 13580
IS 13585 : Part 1
IS 13925 : Part 1
IS 13925 : Part 2
IS 3070 : Part 1
IS 4004
IS 7204 : Part 1
IS 7788
IS 11260 : Part 2
IS 13314
IS 366
IS 7204 : Part 2
Capacitors for inductive heat generating plants
operating at frequencies between 40 and 24 000 Hz
Capacitors for surge protection for use in voltage
system above 650 V and upto 33kV
Internal fuses for series capacitors
Power electronics capacitors
Energy storage capacitors
Metal oxide surge-arresters without gaps for ac
systems
Polycrystalline semiconductor rectifier equipment
Internal fuses and internal overpressure
disconnectors for shunt capacitors
Internal fuses and internal overpressure
disconnectors for capacitors for inductive heat
generating plants
Shunt capacitors for the self-healing type for ac
power systems having a rated voltage upto and
including 650 V
Requirements for ageing test, self-healing test and
destruction test on shunt capacitors of the selfhealing type for ac power systems having a rated
voltage upto and including 650 V
Internal fuses and internal overpressure
disconnectors for power electronic capacitors
Shunt capacitors of non self healing type for ac
power systems having a rated voltage upto and
including 650 V
Shunt capacitors for ac power systems having a
rated voltage above 1000 V Part 1:General
performance, testing and rating safety requirements Guide for installation and operation (superseding IS
2834 : 1986)
Shunt capacitors for ac power systems having a
rated voltage above 1000 V Part 2 Endurance
testinng
Lightning arresters for alternating current systems:
Part 1 Non-linear resistor type lightning arresters
Application guide for non-linear resistor type surge
arresters for alternating current system
Stabilized power supplies dc output: Part 1 Terms
and definitions
Single-phase traction power converters
Stabilized power supplies ac output: Part 2 Tests
Solid state invertors run from storage batteries
Electric irons
Stabilized power supplies dc output: Part 2 Rating
IS 7204 : Part 3
IS 7204 : Part 4
IS 11260 : Part 1
IS 14256
IS 302 : Part 2 :
Sec 3
IS 302 : Part 2 :
Sec 4
IS 302 : Part 2 :
Sec 6
IS 302 : Part 2 :
Sec 7
IS 302 : Part 2 :
Sec 8
IS 302 : Part 2 :
Sec 9
IS 367
IS 369
IS 959
IS 302 : Part 2 :
Sec 11
IS 302 : Part 2 :
Sec 12
IS 302 : Part 2 :
Sec 13
IS 302 : Part 2 :
Sec 14
and performance
Stabilized power supplies dc output: Part 3 Radio
frequency interference tests
Stabilized power supplies dc output: Part 4 Tests
other than radio-frequency interference
Stabilized power supplies ac output:Part 1 Ratings
and performance
Rating specification for semiconductor power
converters for adjustable speed electric drive
systems - particularly for DC motor drives
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section 3
Electric iron
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section 4
Spin extractors
Safety of household and similar electrical
appliances: Part 2 Particuar requirements, Section 6
Cooking ranges, cooking tables, ovens and similar
appliances
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section 7
Domestic electric clothes washing machines
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section 8
Electric shavers, hair clippers and similar appliances
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section 9
Electric toasters, grills, roastors and similar
appliances
Electric kettles and jugs for household and similar
use
Electric radiators
Electric soldering irons
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
11 Tumbler dryers
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section
12 Warming plates and similar appliances
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
13 Frying pans, Deep fat fryers and similar
appliances
Safety of household and similar electrical
appliances: Part 2 Particular requirements. Section
IS 302 : Part 2 :
Sec 15
IS 302 : Part 2 :
Sec 21
IS 302 : Part 2 :
Sec 23
IS 302 : Part 2 :
Sec 24
IS 302 : Part 2 :
Sec 25
IS 1287
IS 1401
IS 1415
IS 1416
IS 2082
IS 2268
IS 302 : Part 2 :
Sec 26
IS 302 : Part 2 :
Sec 30
IS 302 : Part 2 :
Sec 32
IS 302 : Part 2 :
Sec 45
IS 302 : Part 2 :
Sec 46
IS 302 : Part 2 :
Sec A1
IS 302 : Part 2 :
Sec A2
IS 302 : Part 2 :
Sec A4
14 Electric kitchen machines
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
15 Appliances for heating liquids
Safety of household and similar electrical
appliances: Part 2 Particlar requirements, Section 21
Stationary storage type electric water heater
Safety of household and similar elecrical appliances:
Part 2 Particular requirements, Section 23
Appliances for skin and hair care
Safety of household and similar electrical
appliances:Part 2 Particular requirements Sec 24
Refrigerators, food freezers and ice makers
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
25 Microwave ovens
Electric toasters
Accessibility test probes
Electric hand lamps
Safety transformers
Stationary storage type electric water heaters
Electric call bells and buzzers for indoor use
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
26 Clocks
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section
30 Electric radiators
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
32 Massage appliances
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Sec 45
Electric heating tools
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section
46 Electric steam cookers
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section
201 Electric immersion water heater
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Section
202 Electric stoves
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
204 Electric water boilers
IS 302 : Part 2 :
Sec A5
IS 302 : Part 2 :
Sec A6
IS 2994
IS 3017
IS 3412
IS 3481
IS 302 : Part 2 :
Sec A7
IS 3724
IS 3725
IS 4158
IS 4159
IS 4165
IS 5159
IS 5161
IS 5790
IS 6290
IS 6365
IS 6390 : Part 2
IS 7137
IS 7154
IS 8506
IS 8978
IS 8985
IS 10542
IS 10975
IS 11676
IS 11879
IS 13588
IS 14144
IS 14145
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Sec 205
Steam irons
Safety of household and similar electrical
appliances: Part 2 Particular requirements: Section
206 Electric coffee machines
Electric stoves
Thermostats for use with electric water heaters
Electric water boilers
Electric portable lamp stands and brackets
Safety of household and similar electrical
appliances: Part 2 Particular requirements, Sec 207
Electric hot plates
Cartridge type heating elements (non-embedded
type)
Resistance wires, tapes and strips for heating
elements
Solid embedded type electric heating elements
Mineral filled sheathed heating elements
Thermostats for general purpose electric ovens
Mains-operated electric shavers
Flexible electric heating pads for domestic use
Domestic electric cooking ovens
Steam irons
Laboratory electric ovens
Domestic electrical clothes washing machines: Part
2 Requirements for tumbler dryers
Portable, hand held mains-operated electric
massagers
Mains-operated electric hair-dryers
Laboratory electric resistance furnaces
Electric instantaneous water heaters
Single walled baking ovens
Safety requirements for refrigerators and food
freezers for household and similr purposes
(Superceded by IS 302(Part 2/Sec 24):1994)
Electric gas lighters
Microwave ovens for household and similar
purposes
Electric steam cookers
Spring operated impact test apparatus and
calibration
Specification for electric coffee makers
(Superseding IS 3514)
Specification for mains operated clocks (superseding
IS 13886
IS 14155
SP 48
SP 49
SP 50
SP 51
IS 2069
IS 4685 : Part 1
IS 5825
IS 7391 : Part 1
IS 7391 : Part 2
IS 7576
IS 8572
IS 8783 : Part 1
IS 8783 : Part 2
IS 8783 : Part 3
IS 11184
IS 11395
IS 2705 : Part 1
IS 9148
IS 9778
IS 10031
IS 11174
IS 5160)
Bimetallic thermostats and thermal cutouts for use
with electric irons
Domestic electric clothes washing machines for
domestic use (Superceding IS 6390(Part 1):1983 and
IS 6390 (Part 3): 1992
Guide for requirements and testing of electric iron
Guide for requirements and testing of electric
immersion water heaters
Guide for requirements and testing of electric
radiators
Guide for requirement and testing of electric stove
Drums for covered winding wires and strips for
electrical purpose
Varnish bonded glass-fibre covered copper
conductors: Part 1 Round wires
Test procedure for the determination of the
temperature index of enamelled winding wires
Cotton covered copper conductors : Part 1 Round
conductors
Cotton covered copper conductors : Part 2
Rectangular conductors (superseding IS:2068)
Bunched enamelled copper conductors with silk
covering
Paper covered flexible/stranded copper conductors
for transformer leads
Winding wires for submersible motors Part 1:
Conductor data
Winding wires for submersible motors Part 2:
Materials for dielectric and jacket
Winding wires for submersible motors Part 3:
Methods of tests
Enamelled and varnish bonded glass fibre covered
round copper wires
Tape wrapped round copper wires with temperature
index of 220
Current transformers: Part 1 General requirements
Tape wrapped rectangular and square copper wires
with a temperature index of 220
Guide for evaluation of thermal endurance of
varnish bonded glass-fibre covered rectangular
copper conductors
Taper barrelled delivery spools for covered round
electrical winding wires
Aromatic polyamide paper covered rectangular and
square copper wires with temperature index 200
IS 11597
IS 13343
IS 13730 : Part 1
IS 13730 : Part 2
IS 13730 : Part 4
IS 13730 : Part 6
IS 13730 : Part 7
IS 6949
IS 11322
IS 3637
IS 3638
IS 13730 : Part 8
IS 13730 : Part 9
IS 13730 : Part 0
: Sec 1
IS 13730 : Part 0
: Sec 3
IS 13730 : Part
13
IS 13730 : Part
15
IS 13730 : Part
16
Polyester tape wrapped, varnish bonded glass-fibre
covered rectangular paper conductors
Guide for evaluation of thermal endurance of
enamelled and varnish bonded glass covered copper
conductors
Particular types of winding wires: Part 1 Polyvinyl
acetal enamelled round copper wire, class 105
(superseeded by IS 4800(Part 4):1968
Specification for particular types of winding wires
Part 2: Solderable polyurethane enamlled round
copper wirej, class 130, with a bonding buyer.
Particular types of winding wires: Part 4 Solderable
polyurethane enamelled round copper wire, class
130 (superseeds IS 4800(Part 6):1968)
Particular types of winding wires : Parc 06 Oleoresinous senamelled round aluminium wire, Class
180 (superseeds IS 4800(Part 7):1970)
Particular types of winding wiresC Part 7 Polyimide
enamelled round copper wireClass 220 (superseeds
IS 4800(Part 11):1981)
Summation current transformers
Method for partial discharge measurement in
instrument transformers
Gas operated relays
Application guide for gas operated relays
Specification for particular types of winding wires
part 8 polyesterimide enamelled round copper wire
class 180
Specification for particular types of winding wires
:Part 09 Polyester enamelled round aluminium wire,
Class 130
Particular types of winding wires: Part 0 General
requirements, Section 1 Enamelled round copper
wire
Particular typses of winding wires :Part 0 General
requirements, Section 3 Enamelled round aluminium
wire
Particular types of winding wires: Part 13 Polyester
or polyesterimide overcoated with polyamide-imide
enamelled round copper wire, Class 200
Particular types of winding wires : Part 15
Polyesterimide enamelled round aluminium wire,
Class 180
Specification for Particular types of winding wires:
Part 16 Polyester enamelled rectangular copper wire,
Class 155
IS 13730 : Part
17
IS 13730 : Part
20
IS 13730 : Part
26
IS 12083 : Part 2
IS 13772
IS 13773
IS 13730 : Part
28
IS 13730 : Part
32
IS 13730 : Part
33
IS 13730 : Part
34
IS 13778 : Part 1
IS 13778 : Part 2
IS 13778 : Part 3
IS 13778 : Part 4
IS 13778 : Part 5
IS 13778 : Part 6
IS 2705 : Part 2
IS 2705 : Part 3
IS 3156 : Part 1
IS 4146
IS 5547
IS 2705 : Part 4
Specification for particular types of winding wires:
Part 17 Polyvinyl acetal enamelled rectangular
copper wire, Class 105
Particular types of winding wires: Part 20 Solderable
polyurethane enamelled round copper wire, Class
155
Specification for particular types of winding wires:
Part 26 Polymide-imide enamelled round copper
wire, Class 200
Electrical relays: Part 2 Insulation tests
Hand tools for live working up to 1000 V ac and
1500 V dc
Sleeves of insulating material for live working
Specification for particular types of winding wires:
Part 28 Polyesterimide enamelled rectangular copper
wire, Class 180
Specification for particular types of winding wires:
Part 32 Glass-fibre wound, polyester or
polyesterimide varnish-treated, bare or enamelled
rectangular copper wire, temperature index 155
Specification for particular types of winding wieres:
Part 33 Glass-fibre wound, silicone varnish treated
bare or enamelled rectangular copper wire,
temperature, index 200
Particular types of winding wires: Part 34 Polyester
enamelled round copper wire, Class 130
Methods of test for winding wires: Part 1 General
Methods of test for winding wires: Part 2
Determination of dimensions
Methods of test for winding wires: Part 3
Mechanical properties
Methods of test for winding wires: Part 4 Chemical
properties
Methods of tests for winding wires: Part 5
Electricaaal properties
Methods of tests for winding wires: Part 6 Thermal
properties
Current transformers: Part 2 Measuring current
transformers
Current transformers: Part 3 Protective current
transformers
Voltage transformers: Part 1 General requirements
Application guide for voltage transformers
Application guide for capacitor voltage transformers
Current transformers: Part 4 Protective current
transformers for special purpose applications
IS 3156 : Part 2
IS 3156 : Part 3
IS 3156 : Part 4
IS 3231 : Part 1 :
Sec 2
IS 3231 : Part 1 :
Sec 3
IS 3231 : Part 2 :
Sec 3
IS 3231 : Part 3 :
Sec 5
IS 3231 : Part 0
IS 3842 : Part 1
IS 3842 : Part 2
IS 3842 : Part 3
IS 8686
IS 8714
IS 9124
IS 3842 : Part 5
IS 3842 : Part 7
IS 3842 : Part 8
IS 3842 : Part 9
IS 3842 : Part 12
IS 4483 : Part 1
IS 5834 : Part 3
Voltage transformers: Part 2 Measuring voltage
transformers
Voltage transformers: Part 3 Protective voltage
transformers
Voltage transformers: Part 4 Capacitor voltage
transformers
Electrical relays for power system protection: Part 1
General requirements, Section 2 Insulation tests
Electrical realys for power system protection: Part 1
General requirements, Section 3 High frequency
distrubance test for static relays
Electrical relays for power system protection: Part 2
Requirements for principal families, Section 3
General requirements for thermal rlays
Electrical relays for power system Protection: Part 3
Requirements for particular group of relays, Section
5 Impedance measuring relays
Electrical relays for power systems protection: Part 0
General introduction and list of parts
Application guide for electrical relays for ac
systems: Part 1 Overcurrent relays for feeders and
transformers
Application guide for electrical relays for ac
systems: Part 2 Overcurrent relays for generators
and motors
Application guide for electrical relays for ac
systems: Part 3 Phase unbalance relays including
negative phase sequence relays
Static protective relays
Electrical protective relays for use in siesmic areas
Guide for maintenance and field testing of electrical
relays
Application guide for electrical relays for ac
systems: Part 5 Distance protection relays
Application guide for electrical relays for ac
systems: Part 7 Frequency relays
Application guide for electrical relays for ac
systems: Part 8 Voltage relays
Applcation guide for electrical relays for ac systems:
Part 9 Relays for busbar protection
Application guide for electrical relays for ac
systems: Part 12 Differential relays for transformers
Preferred panel cutout dimensions for electrical
relays: Part 1 Flush mounting IDMTL relays
Electrical timer relays for industrial purposes (Part
3) Electronic
IS 9994
IS 10075
IS 14122
IS 13770
IS 13771
IS 13774
IS 13985
IS 282
IS 1778
IS 2532
IS 2665
IS 398 : Part 1
IS 398 : Part 2
IS 398 : Part 3
IS 398 : Part 4
IS 398 : Part 5
IS 2121 : Part 1
IS 2121 : Part 2
IS 2121 : Part 3
IS 2121 : Part 4
Potential relays for capacitor start-capacitor run
hermetic compressors
Start relay and overload protector for resistance start
induction run hermetic compressors
Built in thermal protection for electric motors rated
up to 660 V ac
Insulating foam-filled tubes and solid rods for live
working
Conductive clothing for live working at nominal
voltage up to 800 kV ac
Specification for gloves and mitts of insulating
materials for live working
Terminology for tools and equipment to be used in
live working
Hard-drawn copper conductors for overhead power
transmission
Reels and drums for bare conductors (superseding
IS:2889)
Hard-drawn copper wire for telegraph and telephone
purposes
Cadmium copper wire for telegraph and telephone
purposes
Aluminium conductors for overhead transmission
purposes: Part 1 Aluminium stranded conductors
Aluminium conductors for overhead transmission
purposes: Part 2 Aluminium conductors, galvanized
steel reinforced
Aluminium conductors for overhead transmission
purposes: Part 3 Aluminium conductors, aluminized
steel reinforced
Aluminium conductors for overhead transmission
purposes: Part 4 Aluminium alloy stranded
conductors (aluminium magnesium silicon type)
Aluminium conductors for overhead transmission
purposes: Part 5 Aluminium conductors - galvanized
steel reinforced for extra high voltage (400 kV and
above)_
Conductors and earth wire accessories for overhead
power lines: Part 1 Armour rods, binding wires and
tapes for conductors
Conductors and earth wire accessories for overhead
power lines: Part 2 Mid span joints and repair
sleeves for conductors
Conductors and earthwire accessories for overhead
power lines: Part 3 Accessories for earthwire
Conductors and earth wire accessories for overhead
IS 3402
IS 3476
IS 5613 : Part 1 :
Sec 2
IS 9511
IS 9708
IS 5613 : Part 2 :
Sec 1
IS 5613 : Part 2 :
Sec 2
IS 10162
IS 12048
IS 14214
IS 4495
IS 4496
IS 4497
IS 5260
IS 5353
IS 5673
IS 5674
IS 5700
IS 5778
IS 6084
IS 6085
IS 6096
IS 6097
IS 6933
power lines : Part 4 Non tension joints
Cadmium copper conductors for overhead railway
traction
Trolley and contact wire for electric traction
Code of practice for design, installation and
maintenance of overhead power lines: Part 1 Lines
upto and including 11 kV, Section 2 Installation and
maintenance
Earth knobs for neutral conductors
Stockbridge vibration dampers for overhead power
lines
Code of practice for design, installation and
maintenance of overhead power lines: Part 2 Lines
above 11 kV and upto and including 220 kV,
Section 1 Design
Code of practice for design, installation and
maintenance of overhead power lines: Part 2 Lines
above 11 kV and upto and including 220 kV,
Section 2 Installation and maintenance
Spacers and spacer dampers for twin horizontal
bundle conductors
Helically formed fittings for overhead lines upto 33
kV
Annealed stranded copper conductors for electric
traction
Cinematography - light output of narrow gauge film
projectors method of measurement
Screen luminance for the projection of 16 mm film
by incandescent lamps
16 mm portable sound-and-picture cinematograph
projectors
Buzz-track test film (16 mm) (IS 5260 : 1969 to IS
5266 : 1969 in one volume)
Screen luminance for the projection of 35 mm film
on matt and directional screens
Methods of tests for still projectors
16 mm projector spools
Cinematograph screens
Still projectors
Dimensions for 16 mm motion picture film
Dimensions for 35 mm motion picture film
Dimensions for sprockets for 35 mm motion picture
projectors
Dimensions for cores for motion picture magnetic
film
35 mm portable motion picture projectors
IS 6937
IS 7848
IS 7390
IS 7397
IS 7791
IS 9125
IS 9534
IS 9535
IS 9552
IS 9577
IS 10739
IS 10822
IS 10861
IS 11085
IS 11528
IS 11541
IS 11577
IS 11591
IS 12310
IS 12748
IS 11932
IS 12018
IS 12293
IS 12749
Overhead projectors
Studio spot lights for use in motion piture studios
3150 Hz flutter test film for 35 mm motion picture
sound reproducers, photographic type
B-chain electro-acoustic response of motion picture
sound reproduction system
Projector alignment test film for 35 mm motionpicture sound reproducers
Arc lamp carbons for use in cinemas
Projectors usage of 8 mm type S motion picture film
for direct front projection
Dimensions for 8 mm type S motion picture raw
stock film
Camera usage of 8 mm motion picture film
perforated type S
Positions and dimensions of image area produced by
8 mm type S motion picture camera aperture and
maximum projectable image area
Dimensions for model I - Cartride camera interface
and take up core drive of 8 mm type S motion
picture camera cartridge
Dimensions for projection reels for 8 mm type S
motion picture film
Dimensions for sprockets for 8 mm type S motion
picture film
Dimensions for tape splices for 8 mm motion picture
film for projector use
Dimensions for reels for 16 mm motion picture
projectors (upto and including 120 m capacity: 18
mm size )
Position and dimensions of image area produced by
16 mm motion picture camera aperture and
maximum projectable image area
Dimensions for projectable reels for 8 mm type S
motion picture film for use with projection cassettes
Camera usage of 16 mm motion picture film
Flutter test film for 8 mm type S Audio reproducers,
magnetic type
Motion picture safety film
Recorded characteristics for magnetic sound on full
coat 16 mm motion picture film
A-chain reproduction characteristics of magnetic
sound records on 35 mm and 70 mm striped prints
Recorded characteristics of magnetic audio records
for motion picture film (8 mm type S)
Cinematography - 65 and 70 mm unexposed motion-
IS 12773
IS 12775
IS 2086
IS 8187
IS 9385 : Part 1
IS 9385 : Part 2
IS 9385 : Part 3
IS 9385 : Part 4
IS 9385 : Part 5
IS 9402
IS 9926
IS 10624
IS 563
IS 565
IS 13703 : Part 1
IS 13703 : Part 2
: Sec 2
IS 632
IS 633
IS 634
IS 885
IS 1050
IS 1055
IS 1251
IS 1311
picture film - cutting and perforating dimensions
Cinematography - Recorded characteristics of
magnetic sound record on 35 mm motion picture
magnetics film
Cinematography - Reproduction characteristics of a
chain frequency response for reproduction of 35 mm
photography sound
Carriers and bases used in rewirable type electric
fuses for voltages upto 650V (Superseding IS 8724)
D-type fuses
High voltage fuses: Part 1 Current limiting fuses
High voltage fuses: Part 2 Expulsion and similar
fuses (superseding IS:5792)
High voltage fuses: Part 3 Application guide for
high voltage fuses
High voltage fuses: Part 4 Determination of shortcircuit power factor for testing of high voltage fuses
High voltage fuses: Part 5 Types and dimensions of
fuse-links for current limiting fuses
High voltage fuses for the external protection of
shunt power capacitors
Fuse wires used in rewirable type electric fuses upto
650 volts
High voltage fuse-links for motor circuit
applications
DDT Technical
DDT water dispersible powder concentrates (for
public health use only)
LV Fuses for voltages not exceeding 1000 V ac or
1500 V dc: Part 1 General requirements
[superceding IS 9224 (Part 1):1979]
LV fuses for voltages not exceeding 1000 V ac or
1500 V dc: Part 2 Fuses for use by authorized
persons, Section 2 Examples of standardized fuses
GAMMA - BHC (Lindane) emulsifiable
concentrates
DDT emulsifiable concentrates
Ethylene dichloride carbon tetrachloride mixture
(3:1 v/v)
Common names for pesticides
Lime sulphur solution
Nicotine sulphate solution (Pesticide recommended
for export only)
Zinc phosphide, technical
Ethylene dibromide
IS 1312
IS 1488
IS 1506
IS 1507
IS 1665
IS 1669
IS 1682
IS 1827
IS 1833
IS 2127
IS 2358
IS 2567
IS 2568
IS 2569
IS 2570
IS 2861
IS 2865
IS 3284
IS 3383
IS 3898
IS 3899
IS 3900
IS 3902
IS 3903
IS 3904
IS 3905
IS 4015
IS 4320
IS 4357
IS 4321
IS 4322
IS 4324
IS 4344
IS 4766
IS 4929
IS 4958
IS 5277
IS 5278
IS 5279
IS 5280
Methyl bromide
2, 4-D Sodium, salt technical
Copper oxychloride dusting powder
Copper oxychloride water dispersible powder
concentrates
Cuprous oxide water dispersible powder
concentrates
Cuprous oxide dusting powders
Cuprous oxide, technical (fungicidal grade)
Dimethyl amine SL salts of 2, 4-D
Diazinon, technical
Stabilized methoxy ethyl mercury chloride (MEMC)
concentrate
Formulation based on stabilized methoxy ethyl
mercury chloride (MEMC) concentrate
Malathion emulsifiable concentrates
Malathion dusting powders
Malathion water dispersible powder concentrates
Methyl parathion, technical
Diazinon emulsifiable concentrates
Methyl parathion emulsifiable concentrates
Organo mercurial dry seed dressing formulations
(for export only)
Wettable sulphur powder
Zineb, technical
Zineb water dispersible powders
Ziram, technical
Dimethoate technical
Dimethoate emulsifiable concentrates
Thiometon concentrates
Thiometon emulsifiable concentrates
Guide for handling cases of pesticide poisoning
Thiram technical
Methods for stability testing of forklift trucks
2, 4-D Technical
Endosulfan dusting powders
Endosulfan water dispersible powder concentrates
Endosulfan, technical
Thiram water dispersible powder
Dichlorvos, technical
Phosphamidon, technical
Dichlorvos emulsifiable concentrates
Dicofol, technical
Dicofol emulsifiable concentrates
Fenitrothion, technical
IS 5281
IS 5549
IS 5551
IS 5552
IS 6014
IS 6177
IS 6438
IS 6940
IS 7121
IS 7122
IS 7168
IS 7233
IS 7539
IS 7943
IS 7945
IS 7948
IS 7950
IS 7976
IS 8024
IS 8025
IS 8026
IS 8028
IS 8029
IS 8071
IS 8072
IS 8074
IS 8190 : Part 2
IS 8190 : Part 3
IS 8190 : Part 4
IS 8258
IS 8259
IS 8267
IS 8286
IS 8291
IS 8294
IS 8445
IS 8446
IS 8487
IS 8488
IS 8494
IS 8496
Fenitrothion, emulsifiable concentrates
Warfarin bait concentrates
Warfarin sodium, technical
Warfarin, technical
Emulsifiable larvicidal oil, pyrethrum based
Phosphamidon water soluble concentrates
Aluminium phosphide formulation
Methods of test for pesticides and their formulations
Carbaryl water dispersible powder concentrate
Carbaryl dusting powders
Warfarin sodium salt water soluble powder
2, 4-D Ethyl ester, technical
Carbaryl technical
Trichlorfon dusting powders
Trichlorfon, technical
Fenthion emulsifiable concentrates
Fenthion, technical
Phorate, technical
Formothion, technical solution
Monocrotophos, technical
Formothion emulsifiable concentrate
Quinalphos emulsifiable concentrate
Quinalphos dusting powders
Propanil, technical
Quinalphos, technical
Monocrotophos SL
Requirement for packing of pesticides: Part 2 Liquid
pesticides
Requirement for packing of pesticides: Part 3
Household pesticides
Requirement for packing of pesticides: Part 4
Fumigants
Oxydemeton-methyl technical concentrates
Oxydemeton-methyl emulsifiable concentrates
Dalapon - sodium, technical
Dalapon - sodium, water soluble powder
Phenthoate emulsifiable concentrates
Liquid amine salts of MCPA
Carbendazim, (MBC) technical
Carbendazim (MBC) water dispersible powder
concentrates
Phosalone emulsifiable concentrates
Phosalone, technical
MCPA, technical
Propoxur, technical
IS 8497
IS 8498
IS 8701
IS 8702
IS 8708
IS 8944
IS 8954
IS 8955
IS 8958
IS 8959
IS 8960
IS 8961
IS 8962
IS 8963
IS 9351
IS 9353
IS 9354
IS 9355
IS 9356
IS 9357
IS 9358
IS 9359
IS 9360
IS 9361
IS 9362
IS 9363
IS 9364
IS 9366
IS 9368
IS 9369
IS 9371
IS 9665
IS 9666
IS 9667
IS 10119
IS 10243
IS 10244
IS 10265
IS 10267
IS 10268
IS 10295
IS 10300
IS 10319
IS 10627
IS 10946
Paraquat dichloride water soluble concentrates
Temephos emulsifiable concentrates
Temephos, technical
Diuron, technical
Mancozeb water dispersible powder concentrates
Chlorpyrifos emulsifiable concentrates
Edifenphos, technical
Edifenphos emulsifiable concentrates
Fluchloralin, technical concentrates
Fluchloralin emulsifiable concentrates
Methyl parathion dusting powders
Chlormequat chloride, technical
Chlormequat chloride, aqueous solutions
Chlorpyrifos, technical
Nickel chloride, hexahydrate, pesticidal grade
Alachlor, technical
Alachlor emulsifiable concentrates
Butachlor, technical
Butachlor emulsifiable concentrates
Triallate, technical
Triallate emulsifiable concentrates
Phorate granules, encapsulated
Carbofuran granules, encapsulated
Alachlor granules
Butachlor granules
Fenthion granules
Trichlorfon granules
Quinalphos granules
Carbaryl granules
Diazinon granules
Aldicarb granules encapsulated
Propoxur emulsifiable concentrates
Blank granules
Tridemorph, technical
Ready-to-use insecticides for spot application
2, 4-D Ethyl ester emulsifiable concentrates
2, 4-D Ethyl ester water dispersible powders
Endosulfan granules
Phenthoate granules
Chlorfenvinphos, technical
Fenitrothion water dispersible powders
Captafol technical
Ethion emulsifiable concentrate
Methods for sampling of pesticide formulations
Method of sampling for technical grade - Pesticides
IS 10950
IS 11007
IS 11008
IS 11009
IS 11010
IS 11019
IS 11063
IS 11135
IS 11151
IS 11784
IS 11785
IS 11995
IS 11996
IS 11997
IS 12003
IS 12004
IS 12005
IS 12015
IS 12017
IS 12501
IS 12502
IS 12562
IS 12685
IS 12702
IS 12751
IS 12768
IS 12769
IS 12873
IS 12912
IS 12913
IS 12914
IS 12915
IS 12916
IS 12931
IS 12932
IS 12944
IS 12945
IS 13070
IS 13080
IS 13097
IS 13110
IS 13132
IS 13133
IS 13138
Phenthoate dusting powders
Methabenzthiazuron technical
Methabenzthiazuron water dispersible powder
concentrates
Chlorfenvinphos granules
Ziram collodial
Carbofuran, technical
Metoxuron water dispersible powders
Metoxuron, technical
Barium carbonate, pesticidal grade
Carbaryl BHC (GAMMA) granules
Captan WP
Isoproturon, WP
Deltamethrin EC
Fenvalerate EC
Fenvalerate, technical
Isoproturon, technical
Deltamethrin technical
Cypermethrin, technical
Cypermethrin technical concentrate
Ferbam, Technical
Glyphosate, technical
Ferbam WP
Pendimethalin, technical
Pendimethalin granules
Pendimethalin EC
Thiobencarb, technical
Thiobencarb EC
Copper oxychloride OP
Bromadiolone RB
Bromadiolone, CB
Bromadiolone, technical
Acephate, technical
Acephate SP
Atrazine, WP
Atrazine, technical
Dithianon, technical
Dithianon WP
Alpha Naphthyl acetic acid, technical
Pirimiphos methyl, technical
Fluvalinate, technical
Carboxin, technical
Chlorothalonil, technical
Chlorothalonil WP
Alpha Naphthyl acetic acid SL
IS 13146
IS 13172
IS 13328
IS 13329
IS 13330
IS 13331
IS 13332
IS 13333
IS 13402
IS 13403
IS 13438
IS 13439
IS 13454
IS 13455
IS 13456
IS 13457
IS 13458
IS 13513
IS 13641
IS 13692
IS 13784
IS 13785
IS 13786
IS 13787
IS 13788
IS 13789
IS 13790
IS 14156
IS 14157
IS 14158
IS 14159
IS 14160
IS 14183
IS 14184
IS 14186
IS 14249
IS 14250
IS 14251
IS 14299
IS 14300
IS 14408
IS 14409
IS 14410
IS 14411
IS 14509
Allethrin, technical
Fluvalinate EC
Triadimefon, technical
Triadimefon WP
Bitertanol, technical
Bitertanol WP
Metribuzin, technical
Metribuzin WP
Anilophos, technical
Anilophos EC
Allethrin mosquito coils
Allethrin mosquito repellant mats
Pirimiphos methyl WP
Pirimiphos methyl EC
Pirimiphos methyl space spray
Deltamethrin WP
Metalaxyl, technical
2, 4-D ethyl ester granules
Metalaxyl WS
Metalaxyl - mancozeb WP
Dodine, technical
Dodine, WP
Benomyl, technical
Benomyl WP
Kitazin, technical
Kitazin G
Kitazin EC
Cyfluthrin, technical
Simazine, technical
Cyfluthrin WP
Cartap hydrochloride, technical
Simazine WP
Cartap hydrochloride SP
Cartap hydrochloride G
Diflubenzuron WP
Etofenprox, technical
Etofenprox EC
Captan, technical
Neem extract concentrate containing azadirachtin
Neem based EC containing Azadirachtin
Ethepon, technical
Ethepon, solution
Quinalphos AF
Deltamethrin F
Lambda - cyhalothrin, Technical
IS 14510
IS 14549
IS 498
IS 873
IS 874
IS 1151
IS 1152
IS 1168
IS 1679
IS 4772
IS 5527
IS 5975
IS 7424
IS 8236
IS 8461
IS 8465
IS 8847
IS 9054
IS 9069
IS 9952
IS 11090
IS 11102
IS 11190
IS 11201
IS 11238
IS 11492
IS 11481
IS 11482
IS 11604
IS 11605
IS 12198
IS 12906
IS 12923
IS 12924
IS 12935
IS 13316
Lambda - cyhalothrin, WP
Hexaconazole technical
Grading for vacuum pan sugar (Plantation white)
Liquid glucose
Dextrose monohydrate
Refined sugar
Icing sugar
Cube sugar
Sugar used in food preservation industry
Code of practice for construction of sugar godowns
Layout plan for sugar factory laboratories
Raw sugar
Photoelectric reflectance method for measurement of
whiteness of plantation white sugar in solid state
Slats for cane carriers
Cane knives
Cane carrier chains (To be withdrawn)
Dried glucose syrup
Inter-carrier slats (To be withdrawn)
Inter-carrier chains (To be withdrawn)
Batch type centrifugal liners for final massecuite for
sugar industry (To be withdrawn)
Self discharging centrifugal liners for A & B
massacuites of sugar industry (To be withdrawn)
Glass bottles for sugar standards
Continuous centrifugal liners of B & C massacuites
of sugar industry_ (To be withdrawn)
Cane crushing rollers for sugar industry
Hubs or cane knives
Rotary vacuum filter screens for sugar industry
Supporting liners for batch type centrifugal
machines for sugar industry (To be withdrwn)
Supporting screws for continuous centrifugal
machines_(To be withdrawn)
Woven (mesh) type supporting screens for
continuous centrifugal machines for sugar industry
Woven (mesh) type supporting liners for batch type
centrifugal machines for sugar industry
Sprockets for sugar factories
MISRI
Cane gur (jaggery)
BURA
Recommended industrial screens for grading sugar
Welded austenitic stainless steel tubes for heat
exchangers for the sugar industry
IS 13929
IS 13952
IS 14400
IS 1504
IS 1515
IS 1735 : Part 2
IS 1736
IS 2072
IS 3894
IS 4941
IS 5426
IS 6695
IS 7459
IS 7849 : Part 1
IS 8444
IS 8524
IS 14133
IS 14136
IS 14522
IS 1577
IS 1578
IS 1769 : Part 1
IS 1769 : Part 2
IS 1925
IS 2111
IS 2344
IS 3041
IS 4463
IS 4469
IS 4698
IS 5643
IS 8600
IS 8846
IS 9379
IS 9978
IS 10335
IS 10666
IS 11820
Stainless steel decking plates for cane mud filters
Palm jaggery
Palm sugar
Beeswax, crude and refined
Beehives
Beehives stand: Part 2 Fixed type
Honey extractor, tangential type
Comb foundation sheets
Comb foundation mill
Extracted honey
Travelling bees box
Honey bees - Code for conservation and
maintenance
Wasp trap
Layout for honey house: Part 1 Large scale honey
handling units_ (To be withdrawn)
Fumigant strips for treatment of honey-bees
Solar wax extractor
Beeman's kit
Package bee Box
Honey processing unit - Technical requirements
Cigarettes
Smoking mixtures
Cigars
Cheroots
Bidis
Snuff
Chewing tobacco, ZARDA flake type
Chewing tobacco, manufactured, minced type
Hooka tobacco, manufactured
Code of practice for construction of flue-curing
tobacco barns
Code of practice for seaworthy packing of
unmanufactured cigarette type tobacco
Methods of test for tobacco in tobacco products
Method for sampling of tobacco - General principles
Method for determination of reducing sugars and
sucrose in tobacco and tobacco products
Tobacco and tobacco products -Method for
determination of moisture
Tendu leaf
Glossary of terms for tobacco and tobacco products
Cigarette filters
Method for determination of organo chlorine
pesticide residues in tobacco and tobacco products
IS 12942
IS 14332
IS 920
IS 1374
IS 1509
IS 1712
IS 1713
IS 1932
IS 1934
IS 1935
IS 1942
IS 2151
IS 2152
IS 2153
IS 2154
IS 2239
IS 2503
IS 3160
IS 3161
IS 3162
IS 3163
IS 3198
IS 3440
IS 3441
IS 3591
IS 3592
IS 3593
IS 3648
IS 4193
IS 4307
IS 5063
IS 5064
IS 5065
IS 5470
IS 5560
IS 5654 : Part 1
(reference method)
Methods of sampling for cigarettes
Hookah Tobacco Paste
Common salt for animal consumption including
cattlelicks mineralized
Poultry feeds
Tapioca as livestock feed
Cottonseed oilcake as livestock feed ingredient
Decorticated groundnut oilcake as livestock feed
ingredient
Mustard and rape seed oilcake as livestock feed
ingredient
Sesamum oilcake as livestock feed ingredient
Linseed oilcake as livestock feed ingredient
Bonemeal as livestock feed supplement
Maize germ oilcake as livestock feed ingredient
Maize gluten feed
Maize bran as livestock feed ingredient
Coconut oilcake as livestock feed ingredient
Wheat bran
Decorticated safflower (KARDI) oilcake as
livestock feed ingredient
TUR CHUNI
Gram CHUNI
Gram husk
Rice polish
Fodder yeast
Solvent extracted linseed oilcake (meal) as livestock
feed ingredient
Solvent extracted groundnut oilcake (meal) as
livestock feed ingredient
Solvent extracted coconut oilcakes (meal) as
livestock feed ingredient
Solvent extracted decorticated cottonseed oilcake
(meal) as livestock feed ingredient
Solvent extracted rice bran as livestock feed
Rice bran as livestock feed
Guar meal as livestock feed ingredient
Fish meal as livestock feed ingredient
TUR husk
Tapioca spent pulp as livestock feed
Meat meal as livestock feed ingredient
Dicalcium phosphate, animal feed grade
Compounded feeds for young stock
Feeds for laboratory animals: Part 1 Rats and mice
IS 5654 : Part 2
IS 5654 : Part 3
IS 5672
IS 5862
IS 6107
IS 6242
IS 7059
IS 7060
IS 7061
IS 7472
IS 7874 : Part 1
IS 7874 : Part 2
IS 7874 : Part 3
IS 9599
IS 9703
IS 9863
IS 9867
IS 10147
IS 10165
IS 10670
IS 10671
IS 10657
IS 10672
IS 10741
IS 11586
IS 11968
IS 12829
IS 13398
IS 13399
IS 13426
Feeds for laboratory animals: Part 2 Guinea pigs
Feeds for laboratory animals: Part 3 Monkey
Mineral mixtures for supplementing poultry feeds
Solvent extracted nigerseed oilcakes (meal) as
livestock feed
Silk worm pupae as livestock feed
Solvent extracted undecorticated safflower oilcake
(meal) as livestock feed ingredient
Solvent extracted sal seed meal for feeding livestock
Blood meal as livestock feed
Calcined bone-meal as livestock feed suplement
Pig feeds
Methods of tests for animal feeds and feeding stuffs:
Part 1 General methods
Methods of tests for animal feeds and feeding
stuffs:Part 2 Minerals and trace elements
Methods of tests for animal feeds and feeding stuffs:
Part 3 Microbiological methods
Rubber seed cake as livestock feed
Glossary of terms for animal feeds and feeding
stuffs
Nutrient requirements for poultry
Par boiled rice bran as livestock feed ingredient
Undercorticated sunflower oilcake as livestock feed
ingredient (To be withdrawn)
Decorticated sunflower oilcake as livestock feed
ingredient
Virginia tobacco seed cake as livestock feed
ingredient
Mango seed kernals as livestock feed ingredient
Solvent extracted soyabean oilcake (Meal) as
livestock feed ingredient_ (To be withdrawn)
Mineral mixture for supplementing sheep and goats
feeds
Ambadi (HIBISCUS CANNABINUS) cake as
livestock feed ingredient
Malt sprouts as livestock feed ingredient
Dog feeds
Mango seed kernel (solvent extracted) as livestock
feed ingredient
Alga spirulina, feed grade
Animal feeds and feeding stuffs - Determination of
Urea
Animal feeds and feeding stuffs - Methods of
sampling for aflatoxin analysis
IS 13427
IS 13433 : Part 1
IS 13433 : Part 2
IS 13451
IS 13574
IS 14275
IS 14325
IS 1694
IS 1695
IS 1697
IS 1698
IS 6765
IS 7217
IS 6305 : Part 1
IS 6876
IS 7309
IS 1699
IS 2557
IS 2558
IS 2923
IS 2962
IS 3827
IS 3841
IS 4446 : Part 1
IS 4446 : Part 2
IS 4448
IS 4467
IS 4750
IS 4751
IS 4752
IS 4753
IS 4818
IS 5055
IS 5056
IS 5057
Animal feeds and feeding stuffs - Determination of
aflatoxin B-1 content
Animal feeds and feeding stuffs - Determination of
calcium: Part 1 Titrimetric method
Animal feeds and feeding stuffs - Determination of
calcium: Part 2 Atomic absorption spectrometric
method
Urea molasses block as ruminant feed supplement
Animal feed and feeding stuffs - Determination of
calcium and magnesium in mineral supplements
Technical requirements for urea molasses liquid
drought feed for cattle
Bypass protein feed for cattle - Specification
Tartrazine, food grade
Sunset yellow FCF, food grade
Erythrosine, food grade
Indigo Carmine, food grade
Rated capacity of counter balanced forklift trucks
Classification and nomenclature of powered
industrial trucks
Safety code for powered industrial trucks, Part 1
Application, operation and maintenance
Technical characteristics and testing of fork arms for
forklift trucks
Reach and straddle forklift trucks - Method of
stability test
Methods of sampling and test for food colours
Annatto colour for food products
Ponceau 4R, food grade
Carmoisine, food grade
Methods of sampling and test for KATTHA
Riboflavin (Lactoflavin)
B-Carotene
Chlorophyll Part 1 Magnesium complex
Chlorophyll Part 2 Copper complex
Benzoic acid, food grade_
Caramel
Sorbitol, powder, food grade
Potassium metabisulphite, food grade
Sodium metabisulphite, food grade
Potassium nitrate, food grade
Sorbic acid, food grade
Lecithin, food grade
Common names for coaltar, food colours
Potassium nitrite, food grade
IS 5058
IS 5191
IS 5306
IS 5342
IS 5343
IS 5345
IS 5346
IS 5707
IS 5708
IS 5709
IS 5719
IS 6022
IS 6030
IS 6031
IS 6385
IS 6405
IS 6406
IS 6793
IS 6794
IS 6796
IS 6797
IS 6798
IS 7237
IS 7238
IS 7239
IS 7260
IS 7584
IS 7905
IS 7908
IS 7928
IS 8356
IS 9504
IS 9505
IS 9605
IS 9953
IS 9971
IS 10502
IS 10508
IS 10563
IS 11686
IS 11909
IS 11910
IS 11911
IS 11912
Sodium citrate, food grade
Sodium alginate, food grade
Sodium carboxymethyl cellulose, food grade
Ascorbic acid, food grade
Butylated hydroxyanisole, food grade
Sodium saccharin, food grade
Synthetic food colour - Preparations and mixtures
Agar, food grade
Sodium tartrate, food grade
Calcium saccharin, food grade
Gelatin, food grade
Fast green FCF, food grade
Sodium propionate, food grade
Calcium propionate, food grade
Saccharin, food grade
Canthaxanthine, food grade
Brilliant blue, FCF, food grade
Fumaric acid, food grade
Dodecyl gallate, food grade
Propyl gallate, food grade
Methyl ester of Beta-apo-8 carotenoic acid
Octyl gallate, food grade
Carob bean gum, food grade
Tragacanth gum, food grade
Gum ghatti, food grade
Ethyl ester of Beta-apo-8 `carotenoic acid' food
grade
Reference food colour boxes
Calcium Alginate, food grade
Sulphur dioxide, food grade
Alginic acid, food grade
Titanium dioxide, food grade 6
L(+)-Tartaric acid, food grade
Monosodium L-Glutamate, food grade
Alpha-amylase, food grade
Glyceryl monostearate, food grade
Lactic acid, food grade
Guar gum, food grade
Phosphoric acid, food grade
Mineral oil, food grade
Iso-propyl alcohol, food grade
Sweet orange oil, cold pressed, food grade
Spearmint oil, food grade
Caffeine, food grade
Lime oil, distilled food grade
IS 11913
IS 12342 : Part 2
IS 12408
IS 13186
IS 13462
IS 13657
IS 13658
IS 13659
IS 13702
IS 13704
IS 14123
IS 14124
IS 14125
IS 2860
IS 2867
IS 2868
IS 2869
IS 3245
IS 3246
IS 3247
IS 3248
IS 3500
IS 3501
IS 3543
IS 3547
IS 3880
IS 3881
IS 3882
IS 3883
IS 3884
IS 4624
IS 4625
IS 4626
IS 4628
IS 4935
IS 4936
IS 5781
IS 5800
IS 6028
IS 6669
Tert-Butylhydroquinone (TBHQ)
Raw Seeweeds Part 2 Alginophytes
Gum Karaya, food grade
Citric acid, food grade
Ascorbyl palmitate, food grade
Aspartame, food grade
Polyglycerol esters of fatty acids, food grade
Polyglycerol esters of interestrified ricinoleic acid,
food grade
Propylene glycol, food grade
Glycerol ester of wood rosin (ester gums), food
grade
Sodium ascorbate, food grade
Malic acid, food grade
DL-Tartaric acid, food grade
Methods of sampling and test for processed fruits
and vegetables
Canned mangoes
Canned pineapples
Canned orange segments
Canned peas
Canned Okra (BHINDI)
Canned bitter gourd(KARELA)
Canned tomatoes
Mango chutney
Pickles
Papain
Mango nectar
Canned mango pulp
Tomato juice
Tomato ketchup
Canned Tomato Concentrate - Tomato puree
Canned tomato concentrate - Tomato paste
Dehydrated peas
Dehydrated carrots
Dehydrated potatoes
Dehydrated okra (BHINDI)
Synthetic syrups
Fruit squashes
Fruit and vegetable products - Determination of dry
matter content under reduced pressure and of water
content by azeotropic distillation
Orange juice
Guide for storage and transport of green bananas
Guide for storage of apples
IS 6670
IS 7191
IS 7192
IS 7252
IS 7730
IS 7731
IS 7732
IS 7750
IS 8786
IS 9303
IS 9304
IS 9311
IS 9789
IS 9790
IS 9791
IS 9811
IS 9812
IS 9823
IS 10252
IS 10253
IS 11965
IS 11966
IS 11977
IS 13815
IS 13816
IS 13844
IS 13845
IS 13846
IS 14266
IS 14267 : Part 1
IS 14267 : Part 2
IS 14267 : Part 3
IS 14267 : Part 4
IS 2168
IS 2236
IS 2237
Guide for storage of potatoes
Guide for storage of tomatoes
Guide for storage of citrus fruits
Guide for testing of physical conditions in cold
stores
Guide for storage of pears
Guide for storage of peaches
Apple juice
Cashew kernels
Okra (BHINDI) canned in tomato sauce
Guide for cold storage of table grapes
Guide for storage of mangoes
Guide for storage of onions
Canned apricot
Canned french beans
Canned TINDA
Canned KUNDRI
Canned spinach
Canned potatoes
Canned carrot in brine
Canned papaya in syrup
Round-headed cabbage - Storage in the open
Garlic - Guide to cold storage
Green bananas - Ripening condition
Fruit and vegetable products - Determination of
soluble solids content - Refractometric method
Fruit and vegetable products - Determination of
mineral impurities content
Fruits and vegetable products - Determination of
titratable acidity
Fruits and vegetable products - Determination of
water-insoluble solid content
Fruit and vegetable products - Determination of ash
insoluble in hydrochloric acid
Canned mushrooms
Quick frozen vegetables : Part 1 Quick frozen peas
Qucik frozen vegetables : Part 2 Quick frozen
spinach
Quick frozen vegetables : Part 3 Quick frozen
couliflower
Quick frozen vegetables : Part 4 Quick frozen green
beans and quick frozen wax beans
Pomfret canned in oil
Prawns/shrimp caned in brine
Frozen prawns/shrimp
IS 2345
IS 2420
IS 2421
IS 2883
IS 2884
IS 2885
IS 3336
IS 3849
IS 3850
IS 3851
IS 3852
IS 3853
IS 3892
IS 4302
IS 4304
IS 4780
IS 4793
IS 4796
IS 5198
IS 5471
IS 5472
IS 5734
IS 5736
IS 6032
IS 6033
IS 6121
IS 6122
IS 6123
IS 6677
IS 7143
IS 7313
IS 7582
IS 8076
IS 8652
IS 8653
IS 8836
IS 9312
IS 9750
IS 9808
IS 10059
IS 10760
IS 10761
IS 10762
Dried prawns/shrimps
Mackerel (RASTRELLIGER sp) canned in oil
Sardiness (SARDINELLA sp) canned in oil
Dried white baits (STOLEPHORUS sp)
Dried and laminated Bombay Duck
Frozen frog legs
Shark liver oil for veterinary use
Mackerel (RASTRELLIGER sp) canned in brine
Dry-salted threadfin (DARA) and dry-salted jewfish
(GHOL)
Dry-salted catfish
Dry-salted leather jackets (CHORINEMUS sp)
Dry-salted horse mackerels (CARANX sp)
Frozen lobster tails
Dry-salted Mackerel
Tuna canned in oil
Pomfret, fresh
Pomfret, frozen
Threadfin, frozen
Dry-salted seer fish
Dried shark fins
Fish maws
Sardine oil
Dry-salted SURAI (TUNA)
Mackerel, fresh
Mackerel, frozen
LACTARIUS sp canned in oil
Seer fish (SCOMBEROMORUS sp) frozen
Seer fish (SCOMBEROMORUS, sp) canned in
brine and in their juice
Sardines (SARDINELLA sp) caned in brine
Crab meat, canned in brine
Glossary of important fish species of India
Crab meat, solid packed
Frozen cuttle fish and squid
Sardines frozen
Sardines fresh
Dry-salted DHOMA
Mackerel canned in curry
Sardines, canned in tomato sauce
Fish protein concentrate
Edible fish powder
Mussels canned in oil
Sardine canned in curry
TUNA canned in curry
IS 10763
IS 11427
IS 14513
IS 14514
IS 14515
IS 14516
IS 14517
IS 14520
IS 2346
IS 3752
IS 3753
IS 3811
IS 3865
IS 4100
IS 4449
IS 4450
IS 5286
IS 5287
IS 7058
IS 7585
IS 8538
IS 12544
IS 13019
IS 13428
IS 14326
IS 14327
IS 14398
IS 14543
IS 966
IS 1008
IS 1159
IS 1320
IS 1483
IS 1667
IS 1668
IS 1960
IS 2234
IS 2397
Frozen minced fish meat
Methods of Sampling for Fish and Fisheries
Products
Bache - de - mur
Clam meat - Frozen
Fish Pickles
Cured fish and fisheries products - Processing and
storage - Code of Practice
Fish Processing Industry - Water and Ice - Technical
Requirements
Fish Industry - Operational cleanliness and layout of
market - Guidelines(Amalgamated Revisio of IS
5735, 7581 and 80 82)
Carbonated beverages
Methods of test for alcoholic drinks
Methods of sampling for alcoholic drinks
Rum
Beer
Gin
Whiskies
Brandies
Vodka
Country spirit (distilled)
Table wines
Methods of analysis of wines
Toddy
Non-alcoholic beer
Soft drink concentrate [Earliar title - Non-alcoholic
beverage bases (concentrates) for domestic use]
Packaged Natural Mineral Water
Cashew Fenny
Coconut Fenny
Fortified wines
Packaged drinking water (other than natural mineral
water)
Desiccated coconut
Hard boiled sugar confectionery
Baking powder
Baker's yeast
White bread
Toffees
Lozenges
Wheatmeal bread
Ready IDLI mix
Wafers
IS 2650
IS 3137
IS 3838
IS 3839
IS 4875
IS 4876
IS 6108
IS 6109
IS 6747
IS 7021
IS 7187
IS 7481
IS 7482
IS 7487
IS 7592
IS 7835
IS 7836
IS 7837
IS 8211
IS 8212
IS 8222
IS 8555
IS 8556
IS 8676
IS 8677
IS 8678
IS 8806
IS 9038
IS 9039
IS 9095
IS 9328
IS 9373
IS 9487
IS 9488
IS 9712
IS 10065
IS 10619
IS 10620
IS 10621
IS 10622
IS 10759
IS 11231
IS 11536
BOMBAY HALWA
High protein mixes for use as food supplements
Self-raising flour
Food yeast
Edible groundnut flour (solvent extracted)
Edible cottonseed flour (solvent extracted)
Edible sesame flour (solvent extracted)
Edible sesame flour (expeller pressed)
Chewing gum and bubble gum
Protein rich food supplements for infants and
preschool children
Ice cream cones
Method for determination of protein efficiency ratio
(PER)
Protein-based beverages
Protein enriched biscuits
Peanut chikki candy
Edible medium-fat soya flour
Edible low-fat soya flour
Edible full-fat soya flour
Edible soya protein isolate
Edible groundnut protein isolate
Edible leaf protein concentrate
Bread rusks
Bun
Edible coconut flour (solvent extracted)
Edible sunflower seed flour (solvent extracted)
Vegetable protein-based yoghurt (vegetable curds)
Pan goods confectionery (Dragees)
Reconstitutable protein beverage food
Edible sunflower seed grits
Protein chewy candy
Confectionery industry - Glossary of terms
Glossary of terms relating to bakery industry
`Ready-to-Eat' protein-rich extruded foods
Edible coconut protein concentrates
Cakes
Roasted, groundnut (peanut) kernels
Seasoned, spiced and sweetened cashewnuts
URD (black gram) VADA Mix
Jelebi Mix
Dosa Mix
Brewer's yeast
Milk bread
Processed cereal based complementary foods for
IS 11581
IS 12220
IS 12221
IS 12564
IS 12565
IS 12566
IS 12569
IS 12574
IS 12575
IS 12711
IS 12741
IS 12895
IS 13264
IS 13265
IS 13266
IS 13267
IS 13354
IS 631
IS 14366
IS 14367
IS 1006
IS 1007
IS 1009
IS 1155
IS 1156
IS 1157
IS 1158
IS 1317
IS 1318
IS 1319
IS 1484
IS 1485
IS 2400
IS 2813
IS 2814
IS 2815
IS 2816
IS 2821
IS 3714
IS 3729
IS 4287
infants
Edible cottonseed flour prepared by liquid cyclone
process
Ready gulab jamun mix
Rice chidwa
Fried jack fruit chips
Salted and spiced fried dals
Ready-to-eat extruded snacks
Potato french fries
Fried banana chips
Fried potato chips
Bakery products - Methods of analysis
Bakery prooducts - Methods of sampling
Alga SPIRULINA, food grade
Ready khichdi mix
Ready vegetable pulav mix
Instant curried DAL mix
Ready suji-halwa mix
Ready upma mix
Outdoor aluminium foodgrain storage bins
Food Processing machinery - Dough mixers - Safety
and hygiene requirements
Food Processing machinery - Planetary mixers Safety and hygiene requirements
Arrowroot starch
Custard powder
Wheat flour (MAIDA) for general purposes
Wheat ATTA
Pearl barley
Barley powder
Corn flakes
Edible tapioca chips
Edible tapioca flour
Edible tapioca starch
Rolled oats (quick cooking type)
Macaroni, spaghetti, vermicelli and egg noodles
BESAN
Terminology for foodgrains
Method for sampling of smaller size foodgrains
Slotted tube sampler_(To be withdrawn)
Grain sampler (PARKHI type) (To be withdrawn)
Thermo-sampler (To be withdrawn)
Method for sampling of bigger size foodgrains
Corn sampler (PARKHI type) (To be withdrawn)
Starch - Glossary
IS 4333 : Part 1
IS 4333 : Part 2
IS 4662
IS 4782
IS 4940
IS 5315
IS 4333 : Part 3
IS 4333 : Part 5
IS 4706 : Part 1
IS 4706 : Part 2
:
IS 5503 : Part 1
IS 5606
IS 6151 : Part 1
IS 6261
IS 6894
IS 6895
IS 7147 : Part 1
IS 7247 : Part 1
IS 7247 : Part 2
IS 7247 : Part 3
IS 7247 : Part 4
IS 7247 : Part 5
IS 7463
IS 7464
IS 8162
IS 7715
Methods of analysis for foodgrains: Part 1
Refractions
Methods of analysis for foodgrains: Part 2 Moisture
Methods for sampling of starches and starch
products
Method for determination of sedimentation value of
wheat (flour)
Sampler divider (To be withdrawn)
Methods of sampling for milled cereals and pulses
products
Methods of analysis for foodgrains: Part 3
Determination of hectolitre weight
Methods of analysis for foodgrains: Part 5
Determination of uric acid
Methods of tests for edible starches and starch
products: Part 1 Physical methods
1978
Methods of tests for edible starches and
starch products: Part 2 Chemical methods
General requirements for silos for grain storage :
Part 1 Constructional requirements
Steel bins for grain storage
Storage management code: Part 1 Terminology
Methods of analysis for detection of insect and
rodent contamination in grains and milled products
Malting barley
Barley malt
Steel bins for domestic storage: Part 1 GHARELU
KOTHI
Code of practice for fumigation of agricultural
produce: Part 1 Methyl bromide
Code of practice for fumigation of agricultural
produce: Part 2 Ethylene dibromide
Code of practice for fumigation of agricultural
produce: Part 3 Aluminium phosphide
Code of practice for fumigation of agricultural
produce: Part 4 Ethylene dichloride and Carbon
tetrachloride mixture
Code of practice for fumigation of agricultural
produce: Part 5 General requirements
Wheat flour (MAIDA) for use by biscuit industry
Wheat flour (MAIDA) for use in bread industry
Wheat flour - Method for determination of wet
gluten
Methods for testing suitability of bins for safe
storage of foodgrains
IS 7716
IS 8184
IS 8453
IS 8574
IS 8972
IS 9027
IS 9130
IS 9194
IS 9215
IS 9374
IS 9629
IS 10524
IS 10597
IS 10698
IS 10699
IS 10768
IS 10769
IS 10770
IS 10834
IS 10898
IS 10899
IS 10900
IS 10901
IS 10902
IS 10903
IS 11261 : Part 1
IS 11396
IS 11454
IS 11535
IS 11816 : Part 1
Methods for testing efficacy of fumigation for
disinfestation of grains in domestic bins
Method for determination of ergot in foodgrains
Code of practice for construction of polyethylene
embedded earthen bins for bulk storage of
foodgrains
Maize SUJI or RAVA (Semolina)
Method for determination of co-efficient of friction
of foodgrains
Method for determination of thermal conductivity of
foodgrains
Edible spray dried potato flour
Wheat flour for use in cake industry
Outdoor steel bins for foodgrain storage
Glossary of terms relating to flour milling industry
Maize ATTA
Colorimetric determination of alpha-amylase
activity in cereals and cereal products
Soluble starch phosphate (edible grade)
Method for determination of thermal diffusivity of
foodgrains
Method for determination of specific heat of
foodgrains
Method of test for quality characteristics of pulses
Wheat porridge
Beaten rice
Maize MAIDA
Fortified wheat ATTA
Fortified wheat MAIDA
Fortified barley powder
PAUSHTIK wheat ATTA
PAUSHTIK wheat MAIDA
PAUSHTIK barley powder
Methods for assessment of post harvest grain losses
by rodents: Part 1 General considerations, direct
measurement techniques and biological aspects of
survey procedures
Test methods for determination of storability (safe
storage life) of foodgrains
Method for measurement of carbondioxide in the
inter granular atmosphere
Method of test for determination of glycosidic
hydrocyanic acid in pulses
Storage of cereals and pulses: Part 1 General
consideration of keeping cereals
IS 11816 : Part 3
IS 12516 : Part 3
IS 12516 : Part 4
IS 12700
IS 13046
IS 13662
IS 13678
IS 13693
IS 13863
IS 13864
IS 14613
IS 612
IS 1163
IS 1164
IS 1263
IS 2791
IS 3077
IS 3309
IS 3581
IS 3611
IS 3633
IS 3802
IS 4074
IS 4541
IS 6399
IS 6400
IS 6762
IS 7236
IS 8832
IS 8833
IS 8865
IS 9314
IS 10017
Storage of cereals and pulses: Part 3 Control of
attack by vertebrate and invertebrate animals
Determination of physical characteristics of doughs
made from wheat flour: Part 3 Water absorption and
rheological properties using a valorigraph
Determination of physical characteristics of doughs
made from wheat flour: Part 4 Rheological
properties using an alveograph
Method for determination of falling number of
cereals
Sweet potato flour
Isabgol husk
Isabgol
Determination of de-husked grains in rice by double
staining method
Cereals and milled cereal products - Determination
of viscosity of flour - Method using an amylograph
Wheat - Determination of sedimentation index Zeleny test
Roasted Bengal Gram Flour (Channa Sattu)
Roasted chicory powder
Chocolates
Cocoa powder
Cocoa butter
Soluble coffee powder
Roasted and ground coffee
Soluble coffee chicory powder
Green coffee
Method of sampling for tea
Tea
Roasted coffee-chicory powder
Grading for monsooned coffee
Glossary of tea terms
Code of practice for construction of coffee seed
storage structures
Method for preparation of tea infusion for sensory
evaluation
Drinking chocolate (sweetened cocoa powder)
Glossary of terms for coffee and its products
Method for cut test for cocoa beans
Method for determination of moisture content of
cocoa beans
Cocoa beans
Method for sampling of cocoa beans
Code of practice for construction of cocoa beans
IS 10814
IS 11730
IS 11923
IS 13852
IS 13853
IS 13854
IS 13856
IS 13857
IS 13860
IS 13855
IS 13858
IS 13859
IS 13861
IS 5409 : Part 1
IS 5409 : Part 2
IS 8268
IS 9138
IS 12410
IS 14403
IS 14634
IS 4468 : Part 1
IS 4468 : Part 2
IS 4931
IS 5994
IS 6283 : Part 1
IS 6483
IS 6847
storage structures
Method for sampling green coffee in bags
Glossary of terms for cocoa, chocolate and its
products
Cocoa mass
Tea - Preparation of ground sample of known dry
matter content
Tea - Determination of loss in mass at 103 degree
celcius
Tea - Determination of total ash
Tea - Determination of alkalinity of water-soluble
ash
Tea - Determination of acid-insoluble ash
Instant tea in solid form - Determination of total ash
Tea - Determination of water-soluble ash and waterinsoluble ash
Instant tea - Determination of free flow and
compacted bulk densities
Instant tea in solid form - Determination of moisture
content (Loss in mass at 103 degree celcius)
Instant tea in solid form - Sampling
Agricultural liming materials Part 1: Hydrated lime
and burnt lime
Agricultural liming materials Part 2: Lime stone and
dolomite
RHIZOBIUM inoculants
AZOTOBACTER CHROOCOCCUM inoculants
Terminology related to soil reclamation
Agriculture grade iron pyrites as soil amendment
Code of practice for application of blue green algae
as bio-fertilizer in soil
Agricultural wheeled tractors - Rear-mounted threepoint linkage: Part 1 Categoies 1, 2 3 & 4
Agricultural wheeled tractors - Three-point linkage:
Part 2 Category 1 N (Narrow Hitch)
Agricultural tractors - Rear mounted power take off
Types 1, 2 and 3
Agricultural Tractor - Test code
Tractors and machinery for agriculture and forestry,
powered lawn and garden equipment - Symbols for
operator controls and other displays Part 1 :
Common Symbols
Linch pin assembly
Code of practice for installation of agricultural
wheeled tractor
IS 8265
IS 6283 : Part 2
IS 6840
IS 8132
IS 8133
IS 9253
IS 9864
IS 9869
IS 9935
IS 9939
IS 9980
IS 10273
IS 10282
IS 10318
IS 10703
IS 10747
IS 11081
IS 11841
IS 11858
IS 10740
IS 10743
IS 11082
IS 11806
IS 11821 : Part 1
Agricultural tractors - Guards for power take-off
(PTO) drive-shafts
Tractors and machinery for agriculture and forestry,
powered lawn and garden equipment - symbols for
operator controls and other displays : Part 2 Symbols
for agricultural tractors and machinery
Code of practice for preventive maintenance of
agricultural wheeled tractor
Guidelines for presentation of operator manuals and
technical publications for agricultural tractors and
machinery
Guidelines for location and operation of operator
controls on agricultural tractors and machinery
Guideline for field performance and haulage tests of
agricultural wheeled tractors
Guidelines for stocking spare parts of agricultural
tractors
Technical requirements for power take-off pulley
assembly for agricultural tractors
Test code for power tiller
Glossary of terms relating to agricultural tractors and
power tillers
Guidelines for field performance and haulage tests
of power tillers
Guidelines for declaration of power and specific fuel
consumption and labelling of agricultural tractors
Cage wheel for power tillers
Technical requirements for PTO drive shafts for
agricultural tractors and machines
Agricultural tractors - Maximum actuating forces
required to operate controls
Dimensions of hitch for power tillers
Agricultural tractors - Half cage wheel
Form for reporting accidental overturning of
agricultural tractors
Handle grip for power tiller
Recommendation for operating requirement for
power take-off driven implements
Method for determination of centre of gravity of
agricultural tractors 789-6:1982
Technical requirements of agricultural tractors for
wet land cultivation
Method for determination of seat reference point of
agricultural tractors
Method of test and acceptance conditions for
protective structures of agricultural tractros: Part 1
IS 11821 : Part 2
IS 11822
IS 11859
IS 12036
IS 12061
IS 12062
IS 12180
IS 12207
IS 12224
IS 12226
IS 12343
IS 12953
IS 13642
IS 12239 : Part 1
IS 12239 : Part 2
IS 12239 : Part 3
IS 12362 : Part 1
IS 12362 : Part 3
IS 13064
IS 13539
IS 13549
Dynamic test
Method of test and acceptance conditions for
protective structures of agricultural tractors: Part 2
Static test
Methods of tests for spark arrester of agricultural
tractors and power tillers
Method for determination of turning and clearance
diameter of agricultural tractors
Agricultural tractors - Test procedures - Power tests
for power take off
Agricultural tractors - Braking performance Method of test
Method for measurement of exhaust smoke emitted
by agricultural tractors
Method for noise measurement of agricultural
tractors
Recommendations on selected performance
characteristics of agricultural tractors
Method of test for hydraulic power and lifting
capacity of agricultural tractors
Agricultural tractors - Power tests for drawbar - Test
procedure
Agricultural tractors - Operators seat technical
requirements
Drawbar for agricultural tractors - Link type
Agricultural tractors - Silencers - Technical
requirements
Guide for safety and comfort of operator of
agricultural tractors and power tillers : Part 1
General requirements
Guide for safety and comfort of operator of
agricultural tractors and power tillers: Part 2
Requirements relating to agricultural tractors
Guide for safety and comfort of operator of
agricultural traactors and power tillers: Part 3
Requirements relating to power tillers
Agricultural vehicles - Mechanical connections on
towing vehicles - Part 1: Hooktype
Agricultural vehicles - Mechanical connections on
towing vehicles - Part 3: Tractor drawbar
Power tillers - Installation and preventive
maintenance - Guidelines
Power tillers - Selected performance characteristics Recommendations
Tractors and machinery for agriculture and forestry Hydraulic coupling - Braking circuits
IS 13581
IS 13732
IS 14414
IS 5863
IS 5952
IS 6169
IS 10168
IS 11301
IS 10169
IS 10629
IS 11020
IS 11021
IS 11374
IS 11380 : Part 1
IS 11773
IS 11774
IS 12335
IS 12336
IS 12365
IS 12609
IS 12610
IS 12616
Agricultural wheeled tractors - Operator's seat Laboratory measurement of transmitted vibration
Agricultural tractors and machinery - General
purpose quick-action hydraulic couplers
Agricultural tractors - Axle power determination Test procedures
Method for determination of malathion residues in
food commodities
Methods of test for the Estimation of parathion
residues (To be withdrawn)
Methods for determination of BHC,(HCH) residue
in food comodities
Methods for determination of Fenitrothion residues
in foods
Methods for determination of phosalone residues in
food commodities
Methods for determination of carbaryl residues in
fruits and vegetables
Methods for determination of Aldicarb residues in
crops, soil and water
Methods for determination of carbofuran residues in
crops, soil and water
Methods for determination of dimethoate residues in
food commodities
Methods for determination of monocrotophos
residues in foods
Methods of sampling for the determination of
pesticide residues : Part 1 Agricultural and food
commodities.
Method for determination of ethion residues in food
commodities, Soil and water
Method for determination of dichlorvos residues in
food commodities
Method for determination of propoxur residues in
food commodities
Method for determination of diazinon residues in
food commodities
Method for determination of chlorpyrifos residues in
food commodities
Pesticides - Residues in foods - Fenthion - Method
For determination
Pesticides - Residues in foods - Phosphamidon Method for determination
Pesticides - Residues in foods - Cypermethrin,
Deltamethrin, Fenvalerate and Permethrin - Method
for determination
IS 13829
IS 14465
IS 2491
IS 5837
IS 13830
IS 13831
IS 13832
IS 14161
IS 14162
IS 14311
IS 14437
IS 14627
IS 14629
IS 14630
IS 14462
IS 14485
IS 4303 : Part 1
IS 4303 : Part 2
IS 6540
IS 6542
IS 6968
IS 6541
Method for determination of residues of atrazine and
simazine in agricultural and food commodities and
soil and water
Surface covered cultivation structures-Glossary of
terms
Food Hygiene - General Principles - Code of
Practice
Code for hygienic conditions for soft drink
manufacturing units
Method for determination of residue of captafol in
agricultural and food commodities and soil and
water
Method for determination of residues of acephate in
agricultural and food commodities
Method for determination of dithiocarbamate
residues in agricultural and food commodities
Determination of metalaxyl residues in agricultural
and food commodities
Determination of fosetylAl residues in agricultural
and food commodities
Determination of lindane (GAMMA BHC) residues
in agricultural and food commodities
Method for determination of quinalphos residues in
agricultural and food commodities
Method of test for determination of carbendazim
residues in agriculture and food commodities
Determination of chlorinated pesticide residues in
agricultural and food commodities
Method for determination of dicofol residues in
agricultural and food commodities
Recommendations for layout, design and
construction of green house structures
Recommendations for heating, ventilation and
cooling of green houses
Code for hygienic conditions in fish industry: Part 1
Pre-processing stage
Code for hygienic conditions in fish industry: Part 2
Canning stage
Code for hygienic conditions for manufacture and
handling of ice for human consumption
Code for hygienic conditions for fruit and vegetable
canning units
Code for hygienic condition for PAN (Betel leaf)
stalls and vendors
Code for hygienic conditions for establishment and
maintainance of mid-day school meal programmes
IS 6969
IS 7003
IS 7655
IS 7688 : Part 2
IS 7688 : Part 3
IS 7799
IS 7802
IS 8123
IS 8182
IS 9071 : Part 1
IS 9071 : Part 2
IS 10973
IS 10974 : Part 1
IS 10974 : Part 2
IS 14348
IS 14349
IS 10974 : Part 3
IS 10974 : Part 4
IS 10974 : Part 5
IS 14134
IS 14135
Code for hygienic conditions for handling and sale
of refrigerated drinking water
Code for hygienic conditions for sago
(SABOODANA) manufacturing units
Code of practice for food advertising
Code of practice for labelling of pre-packaged foods:
Part 2 Guidelines on claims
Code of practice for labelling of pre-packaged foods:
Part 3 Nutritional labelling
Code for preservation of vitamins in foodstuffs
Code of hygienic conditions for sweetmeat shop
Code for hygienic conditions for sale of cut fruits,
fruit juice and fruit salad
Code for hygienic conditions for processed meat
products
Code of practice for control of aflatoxin in
groundnut: Part 1 Harvesting, transport & storage of
groundnuts
Code of practice for control of aflatoxin in
groundnut: Part 2 Plant storage and processing flour
and oil
Code for hygienic conditions for food hawkers
Code for hygienic conditions for production,
transport, storage and distribution of indigenous
milk products: Part 1 KHOA and KHOA sweets
Code for hygienic conditions for production,
transport, storage and distribution of indigenous
milk products: Part 2 DAHI
Code for hygienic conditions for alcoholic beverage
industry
Code for hygienic conditions for edible oil and
vanaspati units
Code for hygienic condition for production,
transport, storage and ditribution of indigenous milk
products: Part 3 Coagulated products CHHANA and
CHHANA based sweetmeats
Code for hygienic conditions for production
transport, storage and distribution of indigenous
milk products: Part 4 Frozen products, KULFI
Code for hygienic conditions for production,
transport, storage and distribution of indigenous
milk products: Part 5 Fermented products
SHRIKHAND
Code for hygienic practices for processing and
handling of quick foods
Code for hygienic practices for dehydrated fruits and
IS 14216
IS 14350
IS 15000
IS 5401
IS 5402
IS 5404
IS 5887 : Part 2
IS 5887 : Part 4
IS 6850
IS 6851
IS 5887 : Part 5
IS 6852
IS 6854
IS 7004
IS 7127
IS 7128
IS 7203
IS 7535
IS 7536
IS 7590
IS 7591
IS 7801
IS 10232
IS 10972
IS 11061
vegetables edible fungi
Code for hygienic conditions for spices and
condiments processing units
Code for hygienic conditions in sugar factories
Food Hygiene - Hazard Analysis and Critical
Control Point (HACCP) - and Guidlines for its
Application
Method for detection and estimation of coliform
bacteria in foodstuffs
Method for standard plate count of bacteria in
foodstuffs
Code of practice for handling of samples for
microbiological analysis
Methods for detection of bacteria responsible for
food poisoning:Part 2 Isolation, identification and
enumeration of STAPHYLOCOCCUS AUREUS
and faecal streptococci
Methods for detection of bacteria responsible for
food poisoning : Part 4 Isolation, and identification
of CLOSTRIDIUM WRLCHII, C.BOTULINUM
and BACILLUS CEREUS
Agar, microbiological grade
Meat extract, microbiological grade
Methods for detection of bacteria responsible for
food poisoning :Part 5 Isolation, identification and
enumeration of VIBRIO CHOLERAE and VIBRIO
PARAHAEMOLYTICUS
Bile salts, microbiological grade
Method of sampling and test for ingredients used in
media for microbiological work
Yeast extract, microbiological grade
Tryptone, microbiological grade
Proteose peptone, microbiological grade
Casein hydrolysate (acid digested), microbiological
grade
Liver extract, microbiological grade
Soluble starch, microbiological grade
Gelatine, microbiological grade
Malt extract, microbiological grade
Trypsin, microbiological grade
Guidelines for preparation of dilutions for
microbiological examination of food
Code for preparation of ESCHERICHIA COLI
diagnostic sera
Code for preparation of VIBRIO CHOLERAE
IS 14397
IS 1511
IS 4596
IS 5223
IS 5224
IS 5718
IS 6997
IS 7051
IS 7052
IS 7897
IS 7898
IS 8108 : Part 1
IS 8108 : Part 2
IS 8108 : Part 3
IS 8420
IS 8427
IS 8440
IS 9049
IS 9555
IS 9981
IS 10048
IS 10507
IS 10520
IS 10892
IS 11032
IS 11041
IS 11459
IS 11473
IS 11834
IS 12047
IS 12064
IS 12396
IS 12411
IS 12576
diagnostic sera
Detecton, isolation and identification of pathogenic
E. coli in food
Blades for manually-operated chaff cutter
Glossary of terms relating to oil expellers
Oilseeds milling machinery - Oil expellers - Test
code
Oil milling machinery - Oil expellers single barrel
Test code for seed cleaners
Test code for sugarcane crushers
Power maize shellers
Test code for power maize shellers
Test code for chaff cutter
Manually operated chaff cutter
Test code for grain dryers: Part 1 Selection and
preparation for test
Test code for grain dryers: Part 2 Method of tests for
continuous dryers
Test code for grain dryers: Part 3 Methods of tests
for in-silo dryers
Glossary of terms relating to grain dryers
Agricultural produce milling machinery - Rubber
rolls for paddy dehusker
Test code for paddy cleaners
Paddy dehusker, rubber roll type - Test code
Rice polisher
Glossary of terms relating to agricultural produce
processing equipment
Rice grader - Specification
Paddy separator - Specification
Agricultural produce milling machinery - Emery
stones for burr flour mills
Recommendations for aperture size of sieves for
seed cleaners
Rotary screen-type precleaner
Air-screen seed cleaner
Power-operated chaff cutter
Test code for groundnut decorticator
Symbols and flow diagram for rice milling
Oil seed cookers/kettles, horizontal type
Code of practice for paddy parboiling
Paddy cleaner
Paddy dehusker, centrifugal type
Seed Processing Machinery - Indented cylinder
grader - Test code
IS 12792
IS 12833
IS 13793
IS 13794
IS 14442
IS 14460
IS 14603
IS 8967 : Part 2
IS 8968
IS 9633
IS 9696
IS 9979
IS 10317
IS 10809
IS 10907
IS 11390
IS 11493
IS 11494
IS 11495
IS 11538
IS 11624
IS 12785
IS 13062
IS 13487
IS 13488
IS 11711
IS 12232 : Part 1
IS 12232 : Part 2
IS 13479
IS 13939
IS 14151 : Part 2
Mini rice mill
Agricultural produce milling machinery - Roller
flour mills - Flow diagram
Agricultural produce milling machinery - Milling of
pulses - Flow Diagram
Oilseeds milling machinery - Power GHANIES
Portable
Milling machinery - Burr mill - Test code
Seed processing equipment - Gravity separator
Potato grader - Test code
Farm drainage clay tiles: Part 2 Perforated tiles with
collar joints
Farm drainage concrete tiles
Farm drainage asbestos cement pipes
Code of practice for installation of farm drainage tile
or pipe system
Code for design and laying of mineral filters for tile
drain system
Guide for evaluation of soil properties relevant to
irrigation
Hydraulic rams
Code for design of farm drainage tile or pipe system
Test code for hydraulic rams
Glossary of terms relating to farm drainage
Code for construction and maintenance of surface
farm drainage systems
Code for design of surface farm drainage system
Code of practice for design and installation of farm
drainage pumping plant
Guidelines for the quality of irrigation water
Strainer-type filters
Evaluation of field irrigation efficiencies
Emitters
Emitting pipes system
Recommended criteria for adoptability of different
irrigation methods
Rotating sprinkler: Part 1 Design and operational
requirement
Rotating sprinkler: Part 2 Test method for
uniformity of distribution
Assembled joints between fittings and polyethylene
(PE) pressure pipes - Test for resistance to pull out
Intercepter drains for steep hill slopes under
plantation crops - Guidelines for laying laying
Irrigation Equipment - Sprinkler pipes -
IS 14178
IS 14483 : Part 1
IS 14606
IS 14605
IS 1723
IS 1743
IS 1981
IS 1982
IS 2475
IS 2476
IS 2536
IS 2537
IS 3044
IS 3061
IS 4352
IS 4674
IS 4723
IS 4951
IS 5558
IS 5960 : Part 1
IS 5960 : Part 2
IS 5960 : Part 3
IS 5960 : Part 4
IS 5960 : Part 5
IS 5960 : Part 6 :
Sec 1
IS 5960 : Part 6 :
Sec 2
IS 5960 : Part 7
IS 5960 : Part 8
IS 5960 : Part 10
Specification Part 2: Quick - coupled polyetylene
pipes
Pressurised irrigation equipment - Terminology
Fertilizer and chemical injector system - Part 1
Venturi injector
Irrigation equipment - Media filter - Specification
Irrigation equipment - Micro sprayer - Specification
Pork
Mutton and goat meat canned in brine
Animal casings
Code of practice for ante-mortem and post-mortem
inspection of meat animals
Smoked bacon
Ham
Mutton and goat meat(chevon)-fresh, chilled and
frozen
Beef and buffalo meat-fresh, chilled and frozen
Mutton and goat meat, curried and canned
Pork sausages, fresh
Pork luncheon meat, canned
Dressed chicken
Egg powder
Ham, canned
Chichen essence
Methods of test for meat and meat products: Part 1
Determination of nitrogen content
Methods of test for meat and meat products: Part 2
Determination of ash
Methods of test for meat and meat products: Part 3
Determination of total fat content
Meat and meat products - Method of test : Part 4
Determination of free for content
Methods of test for meat and meat products: Part 5
Determination of moisture content
Meat and meat products - Method of test Part 6
Determination of chloride contentSection 1 Volhard
method
Meat and meat products - Method of Test Part 6
Determination of Chloride content Section 2
Potentiometric method
Methods of test for meat and meat products : Part 7
Determination of nitrite content
Methods of test for meat and meat products: Part 8
Determination of nitrate content
Methods of test for meat and meat products : Part 10
IS 5960 : Part 11
IS 5960 : Part 12
IS 6557
IS 6558
IS 6782
IS 6950
IS 7891
IS 5960 : Part 13
IS 5960 : Part 15
IS 6559
IS 7049
IS 7053
IS 7909
IS 8539 : Part 1
IS 8895
IS 9800
IS 9810
IS 10382
IS 10697
IS 11533
IS 11631
IS 11746
IS 11747
IS 11748
IS 11771
IS 12189
IS 12190
IS 12486
IS 12487
IS 12541
IS 12542
IS 12543
IS 12561
Measurements of pH
Method of test for meat and meat products : Part 11
Determination of glucone-delta-lactone content
Methods of test meat and meat products : Part 12
Determination of L-(+)-glutamic acid content
Albumen flakes,non-edible quality
Code of practice for cold storage of shell eggs
Hog gambrels
Pig hooks
Inedible offal trolleys
Methods of test for meat and meat products : Part 13
Determination of polyphosphates
Methods of test for meat and meat products : Part 15
Determination of L(-)-hydroxyproline content
Code of practice for ante-mortem and post-mortem
inspection for poultry
Code for handling, processing, quality evaluation
and storage of poultry
Basic requirements for a stall for sale of meat of
small and large animals
Slaughter house equipment - Electrical stunning
tongs for pigs
Terminology of meat products and meat animals:
Part 1 Poultry
Guidelines for handling, storage and transport of
slaughter house by-products
Day-old chicks (Layer/broilers) - Basic requirements
Method for evaluation of quality of fresh chicken
eggs
Edible egg albumen-powder
Chicken,canned in brine
Sheep dressing hook
Gambrel for sheep and goats
Luncheon beef,canned
Corned beef, canned
Meat extract, food grade
Soup stock medium (beef)
Sheep spreader
Sheep bleeding shackle
Meat inspection table
Offal handling table for small animals
Chicken curry, canned
Canned ham, minced
Canned egg curry
Pickled quail eggs
IS 13165
IS 13400
IS 13401
IS 1000
IS 1165
IS 1166
IS 1223
IS 1224 : Part 2
IS 1479 : Part 1
IS 1479 : Part 2
IS 1479 : Part 4
IS 1479 : Part 5
IS 1613
IS 1656
IS 1705
IS 1806
IS 1825
IS 2025
IS 2144
IS 2145
IS 2146
IS 2311
IS 2336
IS 2342
IS 2343
IS 2492
IS 2498
IS 2504
IS 2647
IS 2689
IS 2802
IS 2803
IS 2829
IS 2981
IS 3507
IS 3508
IS 3509
Mutton biryani, canned
Chicken sausages
Determination of Thiobarbituric acid value in meat
Lactose, commercial
Milk powder
Condensed milk,partly skimmed and skimmed
condensed milk
Apparatus for determination of fat by gerber method
Determination of milk fat by the gerber method: Part
2 Milk products
Methods of test for dairy industry: Part 1 Rapid
examination of milk
Method of test for for dairy industry: Part 2
Chemical analysis of milk
Methods of test for dairy industry: Part 4 Freezingpoint depression of milk Ho rtveet method
Methods of test for dairy industry: Part 5 Methods of
dairy plant control
Milk bottle crates
Milk cereal based weaning foods
Aluminium foil for milk bottle caps
Malted milk foods
Aluminium alloy milk cans
Cylindrical pipettes for bacteriological examination
of milk
Hand-operated bottle washer
Hand bottle filler
Hand-operated cap sealer for milk bottles
Fat extraction apparatus for milk and milk products
Stainless steel milk vats
Manually operated milk can washer
Can washing trough
Stainless steel road milk tankers
Cheese knife
Hand operated cheese press (vertical)
Cheese mill
Batch pasteurizer (stainless steel)
Ice cream
Capillary pipette for direct microscopic count of
milk
Steam jacketed ghee pans (Stainless steel)
Layout plan for dairy laboratories
Method of sampling and test for butter
Method of sampling and test for ghee
Method of sampling and test for cream
IS 3661
IS 3864
IS 3922
IS 4079
IS 4238
IS 4709
IS 4743
IS 4883
IS 4884
IS 4938
IS 5162
IS 5253
IS 5550
IS 5567
IS 6387
IS 6591
IS 6684
IS 7839
IS 9070
IS 9532
IS 9584
IS 9585
IS 7607 : Part 1
IS 7607 : Part 2
IS 8479 : Part 1
IS 8479 : Part 2
IS 9617
IS 9853
IS 9854
IS 9967
IS 10083
IS 10484
IS 10501
IS 11202
Farm milk cooling tanks
Mobile kit for milk testing
Recommendation for ghee refinery
Canned RASOGOLLA
Sterilized milk
Flavoured milk
Settling tanks for GHEE (stainless steel)
KHOA
Sterilized cream
Insulated stainless steel milk storage tanks, vertical
type (10 000 and 15 000 litres capacity)
CHHANA
Guidelines for cleaning and sterilizing dairy
equipment
BURFI
Bottles for sterilized milk
Vegetable protein infant food with milk (To be
withdrawn)
Rail milk tankers
Milk can trolleys
Dried ice cream mix
Method for determination of fat in cheese by Van
Gul method
Chakka and Shrikhand
Cheese powder
Lactometers
Code of practice for keeping dairy accounts: Part 1
Primary milk collection units
Code of practice for keeping dairy accounts: Part 2
Market milk plants
Method for determination of phosphatase activity in
milk and milk products: Part 1 Routine method
Method for determination of phosphatase activity in
milk and milk products: Part 2 Reference method
DAHI
Milk collection trays
Code for construction of milk delivery vans
Cheese - determination of nitrate and nitrite content
- Method by cadmium reduction and photometry
Method of test for determination of SNF(solids not
fat) in milk by the use of lactometers
PANEER
KULFI
Method for determination of lactic acid and lactate
content in milk powder and similar products
IS 11546
IS 11585 : Part 1
IS 11602
IS 11622
IS 11623
IS 12898
IS 13334 : Part 1
IS 13334 : Part 2
IS 13500
IS 11721
IS 11762
IS 11763
IS 11764
IS 11765
IS 11766
IS 11917
IS 11918
IS 11919
IS 11920
IS 11962
IS 11963
IS 11964
IS 13688
IS 13689
IS 13690
IS 5126
Methods of sampling for milk and milk products
Insulated stainless steel silos for milk storage Part 1
Capacities 60 000 l and 100 000 l
Packed GULAB JAMUNS
Method for determination of total solids content in
condensed milk
Method for determination of moisture content in
milk powder and similar products
Yoghurt
Skim milk powder - Standard grade
Skim milk powder - Extra grade
Spray dried milk powders - Scorched particles Determination
Method for Determination of fat content in milk
powder and similar products (reference method)
Method for determination of fat content in
condensed milk and evaporated 1737:1985 milk
Cheese and processed cheese products Determination of chloride content - Potentiometric
titration method
Method for determination of sucrose content by
polarimetric method in condensed milk
Method for determination of titratable acidity in
milk powder and similar products (reference
method)
Method for determination of titratable acidity in
milk powder and similar products (routine method)
Method for determination of protein content in
caseins and caseinates (reference method)
Method for determination of pH in caseins and
caseinates (reference method)
Method for determination of fixed ash in caseins
(reference method)
Method for determination of water content in cassein
and caseinates (reference method)
Method for determination of ash in rennet caseins
and caseinates (refernce method)
Method for determination of lactose content by
photometric method in caseins and caseinates
Method for determination of free acidity in caseins
(Reference method)
Pasteurized milk
Butter oil (Butter fat)
Pasteurized butter
Glossary of general terms for sensory evaluation of
IS 12333
IS 12756
IS 12757
IS 12758
IS 12759
IS 12760
IS 12899
IS 14433 : Part 1
IS 5398
IS 5399
IS 5400
IS 5835
IS 5838
IS 5886
IS 6273 : Part 3 :
Sec 1
IS 7219
IS 7234
IS 7235
IS 7529
IS 7530
IS 7675
IS 7768
IS 7769
IS 7815
IS 7997
IS 7999
foods
Methods for determination of total solids content in
milk, cream and evaporated milk (reference method)
Cheese and cheese products - determination of total
phosphorus content by molecular absorption
spectrometric method
Cheese and cheese products - determination of citric
acid content (Reference Method)
Cheese and processed cheese products determination of fat content by Gravimetric method
(Reference Method)
Dried milk and dried milk products - determination
of insolubility index
Dried milk - determination of sodium and potassium
contents by Flame Emission Spectrometric method
Enumeration of specific lactic acid bacteria in
yoghurt - Method of test
Infant milk substitutes - Specification : Part 1 Milk
protein based
Methods for estimation of thiamine (vitamin B-1) in
foodstuffs
Methods for estimation of riboflavin (vitamin B-2)
in foodstuffs
Methods for estimation of nicotinic acid (Niacin) in
foodstuffs
Method for estimation of Vitamin D in foodstuffs
Methods for estimation of Vitamin C in foodstuffs
Methods for estimation of carotenes and Vitamin A
(Retinol) in foodstuffs
Guide for sensory evaluation of foods: Part 3
Statistical analysis of data: Section 1
Difference/preference tests
Method for determination of protein in foods and
feeds
Method for estimation of folic acid in foodstuffs
Method for estimation of tocopherols
Method for estimation of Vitamin B-12 in foodstuffs
Method for estimation of pyridoxine (Vitamin B-6)
in foodstuffs
Method for sensory evaluation of beer
Method for sensory evaluation of milk
Method for sensory evaluation of table butter
Method for estimation of amino acids in foodstuffs
Guide for tasting products of intense flavour
Tasting glass for liquid samples
IS 8077
IS 8104
IS 8105
IS 8153
IS 8168
IS 8639
IS 9216
IS 9820
IS 9840
IS 10029
IS 10030
IS 10281
IS 10641
IS 11062
IS 10226 : Part 1
IS 10226 : Part 2
IS 10642
IS 10643
IS 11582
IS 11583
IS 12014 : Part 1
IS 12014 : Part 2
IS 12014 : Part 3
IS 13285
IS 14594
IS 619
Procedure for checking technique of quick frozen
food
Method for test for pungency of chillies by scoville
heat units
Method for sensory evaluation of pungency of black
pepper by scoville heat units
Method for sensory evaluation of fresh fruits
Method for determination of available lysine in
foods
Code for evaluation of the effect of packaging and
storage on the sensory qualities of foods and
beverages
Nutrition and nutritious foods - Glossary of terms
Method for estimation of biotin in foodstuffs
Method for estimation of pantothenic acid in
foodstuffs
Methods for sensory evaluation of sweetened
condensed milk
Methods for sensory evaluation of milk powder
Method for senosry evaluation of processed cheese
Recommended methods for determination of aroma
and taste thresholds
Method for estimation of total dietary fibre in
foodstuffs
Method for determination of crude fibre content:
Part 1 General method
Method for determination of crude fibre content:
Part 2 Modified scharrer
General guidelines for consumer sensory evaluation
of foods and beverages
Sensory evaluation procedure to establish guidelines
for open dating processed food products
Method for sensory evaluation of pungency of
ginger by scoville units
Method for sensory evaluation of Indian made
foreign liquors (IMFL)
Determination of organic preservatives in foodstuffs:
Part 1 Benzoic acid and its salts
Determination of organic preservatives in foodstuffs:
Part 2 Propionic acid and its salts
Determination of organic preservatives in foodstuffs:
Part 3 Sorbic acid and its salts
Guidelines for addition of essential nutrients to food
Sensory analysis - Appratus - Wine testing glass.
Pruning and slashing knives hooked and curved
IS 1971
IS 1976
IS 2192
IS 2559
IS 2563
IS 2565
IS 3092
IS 3093
IS 3094
IS 3122
IS 3327
IS 3342
IS 3369
IS 3372
IS 3494
IS 3606
IS 3652
IS 3906
IS 4358
IS 4366 : Part 1
IS 4366 : Part 2
IS 4930
IS 5135 : Part 1
IS 5135 : Part 2
IS 6024
IS 6025
IS 6284
IS 6288
IS 6316
IS 6320
IS 6638
IS 6813
IS 6816 : Part 1
IS 6817 : Part 1
IS 7230
IS 7353
IS 7565 : Part 1
IS 6816 : Part 2
Hand operated stirrup-type sprayer
Rotary paddy weeder, manually operated
Soil working equipment - Specification - Animal
drawn mouldboard plough, fixed type
Garden rake
Hedge shears, straight-edge type
Ridger, Animal drawn
Rubber draining and tapping knife
Dah, jungle cutting
Bill-hook
Budding and grafting knife combined
Pedal-operated paddy thresher
Soil working equipment - cultivators, Animal drawn
- Specification
Puddler, Animal drawn
Bund former, animal drawn
Pruning secateur
Soil working equipment, Dischauow, Animal drawn
- Specificaton
Foot sprayer
Hand-operated knapsack sprayer
Sickles
Agricultural tillage discs: Part 1 concave type
Agricultural tillage discs: Part 2 Flat type
Axle assembly for pneumatic wheeled animal drawn
vehicles
Hand rotary duster: Part 1 Belly mounted type
Hand rotary duster: Part 2 Shoulder mounted type
Guards for harvesting machines
Knife sections for harvesting machines
Test code for power thresher for cereals
Test code for mouldboard ploughs
Seed-cum-fertilizer drill - Test code
Power thresher, Hammer mill type
Tractor-mounted spring loaded cultivators
Seed-cum-fertilizer drill
Fluted feed roller type seed metering mechanism:
Part 1 Seed feed rollers
Plate type seed metering mechanism: Part 1 Seed
plates
Plain spool for tractor operated disc harrows
Blade for tractor operated terracer
Tines for tractor operated cultivators:Part 1 Rigid
tines
Fluted feed roller type seed metering mechanism:
IS 6816 : Part 3
IS 6816 : Part 4
IS 6817 : Part 2
IS 7201 : Part 1
IS 7565 : Part 2
IS 7593 : Part 1
IS 7640
IS 7825 : Part 1
IS 7825 : Part 2
IS 7927
IS 8122 : Part 1
IS 8122 : Part 2
IS 8213
IS 8463
IS 8480
IS 8548
IS 9020
IS 9129
IS 9164
IS 9217
IS 9019
IS 9575
IS 9581
IS 9632
IS 9813
IS 9818 : Part 1
Part 2 Seed feed cut-off
Fluted feed roller type seed metering mechanism:
Part 3 Retaining ring and cover
Fluted feed roller type seed metering mechanism:
Part 4 Seed feed cup
Plate type seed metering mechanism: Part 2 Seed
feed rollers
Methods of sampling for agricultural machinery and
equipment: Part 1 Hand tools and hand
operated/animal drawn equipment
Tines for tractor operated cultivators: Part 2 S.type
tines
Power operated pneumatic sprayer-cum-duster: Part
1 Knapsack type
Test code for disc harrows
Cylinder type hand lawn mower: Part 1 Wheel type
Cylinder type hand lawn mower: Part 2 Roller type
Method of field testing for manually operated paddy
weeder
Test code for combine harvester-thresher: Part 1
Terminology
Test code for combine harvester-thresher: Part 2
Performance tests
Agricultural trailer
Axle assembly for agricultural tractor-trailer
Glossary of terms relating to crop protection
equipment
Test code for power-operated hydraulic sprayer
Safety requirements for power threshers
Technical requirements for safe feeding systems for
power threshers
Guide for estimating cost of farm machinery
operation
Test code for agricultural discs
Code of practice for installation, operation and
preventive maintenance of power threshers
Power lawn mower, pedestrian-controlled cylinder
(reel) type
Safety and operational requirements for pedestriancontrolled cylinder (reel) power lawn mowers
Code of practice for operation and preventive
maintenance of crop protection equipment
Tractor-mounted blade terracers
Glossary of terms relating to tillage and
intercultivation equipment: Part 1 General terms
IS 9818 : Part 2
IS 9821
IS 9826
IS 9855
IS 9856
IS 9877
IS 10134
IS 10225
IS 10239
IS 10254
IS 10378
IS 10618
IS 10683
IS 10684
IS 10691
IS 10806
IS 10778 : Part 1
IS 10778 : Part 2
IS 10778 : Part 3
IS 10807
IS 11033
IS 11204
IS 11234
IS 11235
IS 11269
IS 11270
IS 11271
IS 11272
IS 11313
IS 11429
IS 11467
IS 11531
IS 11580
Glossary of terms relating to tillage and
intercultivation equipment: Part 2 Terms relating to
equipment
Glossary of terms relating to farm transport
equipment
Glossary of terms relating to harvesting and
threshing equipment
Glossary of terms relating to sowing, planting,
fertilizers and manure application equipment
Test code for potato planters
Code of practice for installation, operation and
preventive maintenance of grain combine
Methods of tests for manually operated sprayers
Bearing spools for tractor-operated disc harrows
Blade for tractor-operated scraper
Share for animal-drawn ridger
Knife back for harvesting machines
Pictorial representation for cautionary notices for
power threshers
Khurpi
Tree pruner
Share for tractor-operated mouldboard ploughs
Trailers for power tillers
Furrow opener for seed-cum-fertiliser drills: Part I
Shovel type
Furrow opener for seed-cum-fertilizer drills: Part 2
Shoe type
Furrow opener for seed-cum-fertilizer drills: Part 3
Disc type
Axles with brakes of trailer for power tillers
Animal drawn potato digger, Ridger type
Sugarcane harvesting knife
Test code for power thresher for groundnut
Test code for groundnut digger, animal drawn
Axle assembly for conventional animal drawn
vehicles
Technical requirements for ring-type hitches for
agricultural trailers
Groundnut planter
Glossary of terms relating to horticultural equipment
Hydraulic power sprayer
Methods for calibration of sprayers
Test code for cereal harvesting machines
Test code for puddler
Glossary of terms relating to forestry equipment
IS 11691
IS 11893
IS 11905
IS 11976
IS 12161
IS 12162
IS 12163
IS 12164
IS 12191
IS 12199
IS 12334
IS 12337
IS 12371
IS 12409
IS 12482
IS 12599 : Part 1
IS 12599 : Part 2
IS 12599 : Part 3
IS 12599 : Part 4
IS 12613 : Part 1
IS 12613 : Part 2
IS 12613 : Part 3
IS 12653
IS 12698
IS 12703
IS 13151
IS 13373
IS 13374
IS 12917 : Part 1
Power thresher, spike tooth type
Potato planter, semi-automatic
Shaft assembly for rotavator for power tiller
Sugarcane planter semi-automatic
Test code for animal carts
Lifting hook
Cant hook
Log tongs
Felling wedges
Pneumatic wheeled animal drawn vehicle
Tractor mounted bund former
Manually operated fertilizer broadcaster
Technical requirements for single acting telescopic
tipping cylinders for agricultural trailers
Garden sword
Methods of test for manually operated dusters
Sowing and fertilizer application equipment Fertilizer metering mechanism, Plate type: Part 1
Fertilizer plate
Sowing and fertilizer application equipment Fertilizer metering mechanism, Plate type: Part 2
Agitator roller
Sowing and fertilizer application equipment Fertilizer metering mechanism, Plate type: Part 3
Auger roller
Sowing and fertilizer application equipment Fertilizer metering mechanism, Plate type: Part 4
Feed cup
Sowing and fertilizer application equipment Fertilizer metering mechanism, fluted feed roller
type: Part 1 Fertilizer feed roller
Sowing and fertilizer application equipment Fertilizer metering mechanism, fluted feed roller
type: Part 2 Fertilizer feed cut off
Sowing and Fertilizer Application Equipment Fertilizer metering mechanism, fluted feed roller
type: Part 3 Fertilizer retaining ring and cover
Rubber tapping tools - coagulation tray
Forestry tools - Tree marking digit set
Forestry tools - Tree marking hammers
Forestry Tools - Two-men Log tongs
Grass shear
Forestry tools - Hand sappie, nursery (Kutla)
Farm transport equipment - Conventional animal
drawn vehicle Part 1 Cattle, donkey and mule
IS 12917 : Part 2
IS 13376
IS 13377
IS 13485 : Part 1
IS 13733
IS 13818
IS 13821
IS 14459
IS 14523
IS 14524
IS 14525
IS 14526
IS 14540
IS 14541
IS 3059
IS 3699 : Part 1
IS 3699 : Part 2
IS 3916
IS 4746
IS 5236
IS 5237
IS 3907 : Part 1
IS 3907 : Part 2
IS 3907 : Part 3
IS 4157 : Part 1
IS 4157 : Part 3
IS 5238 : Part 1
Farm transport equipment - Conventional animal
drawn vehicle Part 2 Camel
Forestry tools - Debarking spud
Forestry tools - SHRUB cutting knife
Forestry tools - Stalk puller:Part 1 Light duty
Agricultural trailers and trailed equipment - Braking
cylinders
Harvesting equipment - Tractor operated potato
digger shakers - Test code
Forestry tools - wooden filing vice
Battery operated rotary atomiser disc type ULV
Sprayer
Forstry tools - Dibbling board
Forestry tools - Dibble iron
Forestry tools - Seed plucker
Forestry tool - plant carrier
Intercultivation Equipment - Hand hoes Specification
Forestry and plantation tools - Hoes and forks Specification [amalgamated revision of IS 621,
13375, 13486(Pt 1), 4315]
Code for transport of monkeys by air
Code for transport of monkeys by land: Part 1
Transport from trapping area to the nearest rail-head
Code for transport of monkeys by land: Part 2
Transport from rail-head to the nearest airport
Code of practice for pig housing
Code for transport of dogs and cats by rail, road and
air
Code for transport of pigs by rail and road
Code for transport of small and medium sized seed
eating birds
Code for transport of laboratory animals: Part 1
Transport of mice, rats, rabbits, guinea pigs,cotton
rats and hamsters
Code for transport of laboratory animals: Part 2
Transport of snakes
Code for transport of laboratory animals: Part 3
Transport of frogs
Code for transportation of livestock: Part 1
Transportation of equines (horses, ponies, mules and
donkeys) by rail, road, air and sea
Code for transport of livestock: Part 3 Transport of
sheep and goat by rail and road
Code for transport of poultry: Part 1 Transport of
IS 5238 : Part 2
IS 5255
IS 5283
IS 5284
IS 5309 : Part 1
IS 5309 : Part 2
IS 5310
IS 5701 : Part 1
IS 5701 : Part 2
IS 6027
IS 6543
IS 6544
IS 6545
IS 6692
IS 5701 : Part 3
IS 5701 : Part 4
IS 5701 : Part 5
IS 5701 : Part 6
IS 5701 : Part 7
IS 5701 : Part 8
IS 5701 : Part 9
IS 5701 : Part 10
IS 6384 : Part 1
IS 6384 : Part 2
IS 6384 : Part 3
IS 6696
IS 7179
day-old chicks and turkey poults
Code for transport of poultry:Part 2 Transport of
poultry other than day-old chicks and turkey poultry
Poultry feeders
Poultry waterers, portable
Recommendations for community milking shed
Brooders: Part 1 Battery brooders
Brooders: Part 2 Floor brooders
Electrically-heated poultry incubators
Code for breeding, care, management and housing of
laboratory animals: Part 1 Laboratory mice and rats
Code for breeding, care, management and housing of
laboratory animals: Part 2 Laboratory rabbits
Recommendations for farm cattle housing for large
dairy farms
Glass artificial insemination pipettes for cattles
Wing band for poultry
Leg band for poultry
Method of milk recording of cattle
Code for breeding, care, management and housing of
laboratory animals: Part 3 Laboratory guinea-pigs
Code for breeding, care, management and housing of
laboratory animals: Part 4 Laboratory golden
hamsters
Code for breeding, care, management and housing of
laboratory animals: Part 5 Laboratory snakes
Code for breeding, care, management and housing of
laboratory animals: Part 6 Laboratory cotton rats
(sigmodon hispidus and sigmodon hispidus hispidus
Code for breeding, care, management and housing of
laboratory animals: Part 7 Laboratory frogs
Code for breeding, care, management and housing of
laboratory animals: Part 8 Laboratory chicks
Code for breeding, care, management and housing of
laboratory animals: Part 9 Laboratory pigeons
Code for breeding, care, management and housing of
laboratory animals: Part 10 Laboratory mosquitoes
Code for care, management and housing of
laboratory animals: Part 1 Laboratory monkeys
Code for care, management and housing of
laboratory animals: Part 2 Laboratory dogs
Code for care, management and housing of
laboratory animals: Part 3 Laboratory cats
Egg washing machines
Disposable plastic artificial insemination pipettes for
IS 7180
IS 7516
IS 7517
IS 7518
IS 8102
IS 8103
IS 10449
IS 10450
IS 11786
IS 11799
IS 11800
IS 11942
IS 12237
IS 12939
IS 12946
IS 12964
IS 13002
IS 13005
IS 13006
IS 13033
IS 13044
IS 13181
IS 13819
IS 13820
IS 8595
IS 8596
IS 13477
IS 13979
cattle
Disposable artificial insemination gloves
Trap nests for poultry
Pedigree hatching boxes for Poultry
Laying battery cages for poultry
Technical requirements for frozen semen of
breeding bull
Code for cleaning and sterilization of artificial
insemination equipment
Code for transport of live fish seed for inland
pisciculture purposes
Code for transport of fresh water aquarium fish
Recommendations for cattle housing for an average
farmer
Recommendations for cattle housing for a rural milk
producer
Artificial vagina for bovines
Recommendations for GAUSHALAS and other
organized milk producers
Recommendations for loose housing systems of
animals
Method for heat resistance test of frozen semen of
breeding bull
Filling nozzle
Method of quantitative determination of
progressively motile spermatazoa in frozen bull
semen
Method for enumeration of living aerobic microorganizms of bull semen
Method for detection of faculative pathogenic
micro-organisms of bull semen
Freezing grill
Straw holding clips
Technical requirement for freshly collected semen of
breeding sheep
Artificial insemination sheath
Articifial insemination guns
Artificial insemination straws
Terminology for parameters of stationary steam
boilers
Recommended parameters of stationary steam
boilers
Purchasers data sheet for industrial boilers
Method of calculation of efficiency of packaged
steam boilers
IS 8633
IS 8753
IS 9330
IS 13445 : Part 1
IS 13445 : Part 2
IS 13980
SP 26
IS 2825
IS 659
IS 660
IS 1391 : Part 2
IS 1474
IS 1476
IS 2167
IS 2370
IS 2374
IS 3315
IS 3615
IS 3621
IS 4831
IS 5038
IS 5111
IS 7872
IS 8148
IS 10594
IS 7613
IS 7896
IS 10609
IS 10617 : Part 1
IS 10617 : Part 2
IS 10617 : Part 3
IS 11327
Technical requirements for location of boilers
installations and boiler houses
Code for acceptance tests on stationary steam
generators of the power station type
Terminology for parameters of waste heat boilers
and boilers for special purposes
Suppliers data sheet for industrial water tube boilers:
Part 1 Proposed stage
Suppliers data sheet for industrial water tube boilers:
Part 2 Post order stage
Acceptance tests on industrial boilers - Code of
practice
ISI steam tables in SI units
Code for unfired pressure vessels
Safety code for air conditioning
Safety code for mechanical refrigeration
Room air conditioners: Part 2 Split air conditioners
Commercial refrigerators
Domestic refrigerators (mechanically operated)
Bottle coolers
Sectional cold rooms (walk-in-type)
Ice tanks
Evaporative air coolers (desert coolers)
Glossary of terms used in refrigeration and air
conditioning
Domestic refrigerators (absorption type)
Recommendation on units and symbols for
refrigeration
Ice cube trays for domestic refrigerator
Testing of refrigerant compressors
Freezers
Packaged air conditioners
Thermostatic-expansion valves
Method of testing panel type air filters for air
conditioning and ventilation purposes
Data for outside design conditions for air
conditioning for summer months
Refrigerants - Number designation
Hermetic compressors:Part 1 High temperature
application group
Hermetic compressors: Part 2 Medium temperature
application group
Hermetic compressors: Part 3 Low temperature
application group
Requirements for refrigerants condensing units
IS 11328
IS 11329
IS 11330
IS 11338
IS 11951
IS 12249
IS 9478
IS 12933 : Part 1
IS 12933 : Part 2
IS 12933 : Part 3
IS 12933 : Part 5
IS 12934
IS 12976
IS 13429 : Part 1
IS 13429 : Part 2
IS 12986 : Part 1
IS 13129 : Part 1
IS 13129 : Part 2
IS 13129 : Part 3
IS 13129 : Part 4
IS 13152 : Part 1
IS 13429 : Part 3
IS 3948
IS 4240
IS 5228
Self contained automatic ice makers
Finned type heat exchangers for room air
conditioners
Refrigeration oil separator
Thermostats for use in refrigerators, air conditioners,
water coolers and beverage coolers etc
Pumpset for desert coolers
Dessicant driers used in refrigeration
Family size bio-gas plant - Code of practice
Solar flat plate collector - Specification: Part 1
Requirements
Solar flat plate collector - Specification: Part 2
Components
Solar flat plate collector: Part 3 Measuring
instruments
Solar flat plate collector - Specification: Part 5 Test
methods
Solar energy - Thermal applications - Vocabulary
Code of practice for solar water heating systems
Solar cooker - Specification: Part 1 Requirements
Solar cooker - Specification: Part 2 Components
Glass fibres reinforced polyster resin gas holders for
bio-gas plants
Solar heating - Domestic water heating system: Part
1 Performance rating procedure using indoor test
methods
Solar heating - Domestic water heating systems: Part
2 Procedure for system performance characterization
and yearly performance predication
Solar heating - Domestic water heating systems: Part
3 Procedure for system component characterization
and predication for yearly performance using
component performance data
Solar heating - Domestic water heating system: Part
4 Determination of durability and reliability
Solid bio-mass chulha - Specification Part 1 Portable
(metallic)
Solar cooker - Specification: Part 3 Test methods
Calibrated high tensile steel (round link) chain
(electric butt welded) for chain conveyors and coal
plough used in mines
Glossary of conveyors terms and definitions
Code of practice for the construction of continuous
movement monocable ropeways with fixed grips
intended for transportation of passengers
IS 5229
IS 5230
IS 5563
IS 5626
IS 5895
IS 6832
IS 6833
IS 6834 : Part 1
IS 6834 : Part 2
IS 6930
IS 7054
IS 7155 : Part 1
IS 7155 : Part 2
IS 7155 : Part 4
IS 7155 : Part 5
IS 7155 : Part 7
IS 7155 : Part 8
IS 7167
IS 7423
IS 7465
IS 7649
IS 8531
IS 8597
IS 8598
IS 8599
IS 8646
IS 9228
IS 8723
Aerial ropeways - Transportation of passengers Continuous movement monocable with automatic
grips - Construction and design - Code of practice
Code of practice for the construction of continuous
to-and-fro movement bicable ropeways intended for
the transportation of passengers
Screw conveyors for industrial use
Chain conveyors - Connector units, shackle type Specification
Steel roller conveyors
Fixing screws and fixing washers for bucket
elevators
Bucket for bucket elevators
Conveyor chain, chain wheels and attachments:Part
1 Chains
Conveyor chain, chain wheels and attachments:Part
2 Chainwheels
Dimensions for fixing arrangements of buckets for
bucket elevators
Casing for bucket elevators
Code of recommended practice for conveyor
safety:Part 1 General information
Code of recommended practice for conveyor
safety:Part 2 General safety requirements
Code of recommended practice for conveyor safety:
Part 4 Vibrating conveyor/feeder
Code of recommended practice for conveyor safety:
Part 5 Apron conveyors/Apron feeders
Code of recommended practice for conveyor safety:
Part 7 Inspection and maintenance
Code of recommended practice for conveyor safety
Part 8 Flight conveyors (scraper conveyors)
Code for selection and use of bucket elevators
Dimensions for apron conveyors
Portable and mobile troughed belt conveyors
Glossary of terms used in connection with aerial
ropeways and cableways
Pulleys for belt conveyors
Flat belt conveyors
Idlers and idler sets for belt conveyors
Recommendations for selection of apron conveyors
Conveyors - Scrapper (flight) - General
requirements
Mono seat chairs for chairlifts used in winter sports
Dimensions for vibrating conveyors and feeders
IS 8730
IS 9047 : Part 4
IS 9047 : Part 6
IS 9413
IS 9454
IS 11168 : Part 1
IS 11592
IS 11619
IS 12059
IS 12060
IS 12101
IS 12108
IS 12204
IS 12215
IS 12400
IS 12401
IS 12907
IS 12941
IS 12959
IS 12960
IS 12961
IS 13324
IS 14169
IS 14188
IS 14386
with rectangular or trapezoidal trough
Classification and codification of bul materials for
continuous material handling equipment
Data sheet for aerial ropeways and cableways:Part 4
Data to be supplied by intending purchaser for aerial
system for transportation of goods, underground
Data sheet for aerial ropeways and cableways:Part 6
Data to be supplied by intending purchaser for aerial
system for transportation of forestry products
Rope guide rollers for haulage ropes of bicable
aerial ropeways for transportation of goods
Bicable load carriers
Data sheet for aerial ropeways and cableways to be
provided to intending purchaser and user Part 1 Data
to be supplied for aerial ropeways system for
transportation of goods. surface
Code of practice for selection and design of belt
conveyors
Scrapers bar for armoured face conveyors
Dimensions for rotary vane feeders
Code of practice for selection of rotary vane feeders
Roller type hold-back device
Code of practice for selection of rotary table feeders
Code of practice for selection of reciprocating
feeders
Code of practice for selection of belt feeders
Code of practice for selection of electromagnetic
feeders
Code of practice for selection of mechanical
vibrating feeders
Screw feeder - Purchaser's data sheet
Code of practice for selection and use of super
capacity bucket elevator
Technical supply requirements for sprocket wheels
for link chains
Determination of power requirements of screw
feeders - General requirements
U-link for chains for bucket elevators_Specification
Screw feeders - General requirements
Recommendations for type selection of feeders
Conveyor systems - Maintenance facilities - Design
parameters
Belt conveyors - Travelling tripper - Motorised-for
belt widths 650 mm to 1600 mm - Dimensions
IS 2431
IS 4184
IS 4988 : Part 1
IS 4988 : Part 2
IS 4988 : Part 3
IS 4988 : Part 4
IS 4988 : Part 5
IS 5972
IS 7439
IS 8647
IS 10303
IS 10443
IS 9776
IS 9777
IS 10095
IS 10280
IS 10463 : Part 2
IS 10463 : Part 6
IS 10464
IS 10678
IS 10689
IS 10704
IS 10856
IS 10859
IS 11114 : Part 2
IS 11114 : Part 3
Steel wheel barrows (single wheel type)
Steel wheel barrows (with two wheels)
Glossary of terms and classification of earth moving
machinery:Part 1 General terms
Glossary of terms and classification of earth moving
machinery: Part 2 Dozers
Glossary of terms and classification of earth moving
machinery: Part 3 Motor and towed scrappers
Glossary of terms and classification of earth moving
machinery: Part 4 Excavators
Glossary of terms and classification of earth moving
machinery: Part 5 Motor graders
Glossary of pneumatic and hydraulic conveyor terms
and definitions
Dimensions for aeroslides
Design criteria for pneumatic conveying systems
Earth moving machinery - Preservation and storage
Data sheet for selection of marine loading arms
Data sheet for selection of weighing-cumtipping/bag filling machines for bulk handling
equipment
Data sheet for selection of weigh bridges for bulk
handling equipment
Guidelines for selection of tipplers for broad gauge
open railway wagons
Earth-moving machinery - Operation and
maintenance - Format and content of manuals
Glossary of terms for bulk handling equipment:Part
2 Stacking loading and reclaiming equipment
Glossary of terms for bulk handling equipment Part
6 Cyclic loose bulk handling equipment (nonstationary)
Data sheet for selection of wagon puller/pusher
Data sheet for design and selection of vacuum
producer
Earth moving machinery - Minimum access
dimensions
Earth moving machinery - Access system
Earth-moving machinery - Elevating scrapers Volumetric ratings
Earth-moving machinery - Dumper bodies Volumetric ratings
Earth-moving mchinery - Definitions of dimensions
and symbols: Part 2 Base machines
Earth-moving machinery - Definitions of dimensions
IS 11114 : Part 4
IS 11249
IS 11737
IS 12137
IS 12138
IS 11115
IS 11252
IS 11738 : Part 1
IS 11738 : Part 2
IS 12140
IS 12192
IS 12206
IS 12209
IS 12567
IS 12645
IS 12663 : Part 1
IS 12669 : Part 1
IS 13065
IS 13081
IS 13116
IS 13253
IS 13936
IS 13082 : Part 1
and symbols: Part 3 Equipment
Earth-moving machinery - Definitions of dimensions
and symbols: Part 4 Loaders
Data sheet for selection of front end loaders
Bag stitching machines - Specification
General requirements of wagon puller/pusher
Earth-moving machinery - Basic types - Vocabulary
)
Earth moving machinery - Human physical
dimensions of operators and minimum operator
space envelop
Earth-moving machinery - Zones of comfort and
reach for controls
Bulk handling equipment - Crawler tractors - Data
sheet : Part 1 Information to be supplied by
purchaser
Bulk handling equipment - Crawler tractors - Data
sheet, Part 2 Information to be supplied by
manufacturers/suppliers
Data sheet for selection of dumpers
Earth-moving machinery - Hydraulic excavators Hoe type buckets - Volumetric ratings )
Earth-moving machinery - Loader and front loading
excavator buckets - Volumetric ratings
Earth-moving machinery - Guide to procedure for
operator training
Pneumatic handling equipment - Bends Dimensions
Earth-moving machinery - Crawler and wheel
tractor dozer blades - Volumetric ratings
Bulk handling equipment - Reclaimer - Data sheet
for selection: Part 1 Scraper reclaimer (Rail
Mounted)
Bulk handling equipment - Hydraulic excavator Data sheet for selection
Bulk handling equipment - Wagon marshalling
equipment - Endless rope type - General
requirements
Earth moving machinery - Symbols - Guidelines for
development and evaluation
Earth moving machinery - Engine test code - Net
power
Earth-moving machinery - Diagnostic ports
Bulk handling equipment - Wheeled loaders General requirements
Bulk handling equipment - Ship unloader - Gantry
IS 13082 : Part 2
IS 13082 : Part 3
IS 13113
IS 13148
IS 13685 : Part 1
IS 13685 : Part 2
IS 13768
IS 13769
IS 13945
IS 3819
IS 3820
IS 4001
IS 4005
IS 13989
IS 14416
IS 14417
IS 3869 : Part 1
IS 3869 : Part 2
mounted grab type - Code of practice for design,
manufacture and erection: Part 1 Mechanical and
structural requirements
Bulk handling equipment - Ship unloader - Gantry
mounted grab type - Code of practice for design,
manufacture and erection, Part 2 Electro-mechanical
requirements
Bulk handling equipment - Ship unloader - Gantry
mounted grab type - Code of practice for design,
manufacture and erection, Part 3 Information to be
supplied by purchaser and the manufacturer
Bulk handling equipment - Wagon marshalling
equipment - Endless rope type - Data sheet
Bulk handling equipment - Mobile continuous type Rules for the design of structures
Bulk handling equipment - Ship loader - Data sheet
for selection Part 1 Information to be supplied by the
purchaser
Bulk handling equipment - Ship loader - Data sheet
for selection Part 2 Information to be supplied by
manufacturer/supplier
Earth moving machinery - Laboratory evaluations of
roll-over and falling-object protective structures Specification for deflection limiting volume
Earth moving machinery - Falling-object protective
structures - Laboratory tests and performance
requirements
Bulk handling equipment - Bagging machines
(electronic type) - Data sheet
Solid forged coal cutting picks
Tungsten carbide tipped coal cutting picks
Mine tubs - Specification
Tungsten carbide for mining tools
Bulk handling equipment - Bagging machines
(mechanical type) - Design and construction General requirements
Bulk handling equipment - Bucket wheel reclaimer
rail mounted type - Design, manufacture and
erection - Code of practice
Bulk handling equipment - Single boom slewable
stacker - Rail mounted - Design, manufacture and
erection - Code of practice
Shortwall coal cutting machine: Part 1 General
requirement for skid mounted shortwall coal cutting
machines
Shortwall coal cutting machine: Part 2
IS 4791
IS 4792
IS 4863
IS 5028
IS 5114
IS 5307
IS 5767
IS 5814
IS 5940
IS 7577
IS 7578
IS 7580
IS 7586
IS 8003
IS 8066
IS 8166
IS 8266
IS 7587 : Part 1
IS 7587 : Part 3
IS 7587 : Part 4
IS 7587 : Part 5
IS 7587 : Part 6
IS 7587 : Part 8
IS 7974 : Part 1
IS 7974 : Part 2
IS 7974 : Part 3
IS 8421
IS 8473
IS 8534 : Part 1
Recommendations on selection of the basic
parameters of the cutting system and the calculation
of power consumption
Glossary of mining terms (drainage)
Glossary of mining terms (ventilation)
Glossary of mining terms (drilling and blasting)
Glossary of mining terms (planning and surveying)
Reflectorized signs for mines
Glossary of mining terms (boring and exploration)
Glossary of mining terms (strata control)
Glossary of mining terms (shaft and associated
equipment)
Glossary of mining terms (geology)
Gas testing flame safety lamps
Wedge and slot type roof bolt
Glossary of mining terms (transport)
Friction props for mines
Wheel axle assemblies for mine cars
Mine cars
Rotary drill bits for drilling principally in coal
Expansion shell type roof bolts
Cage suspension gear for winding in mines Part 1
General requirements
Cage suspension gear for winding in mines Part 3
Shackles and pins
Cage suspension gear for winding in mines Part 4
Bridle chains
Cage suspension gear for winding in mines Part 5
Equalizing plates
Cage suspension gear for winding in mines Part 6
Safety detaching hooks (4 plate type)
Winding in mines - Suspension gear part 8 Clivey
hook suspension arrangements
Graphical symbols for use on detailed maps, plans
and geological cross sections:Part 1 General rules of
representation
Graphical sysmbol for use on detailed maps, plans
and geological cross sections Part 2 Representation
of sedimentary rocks
Graphical symbols for use on detailed maps, plans
and geological cross sections: Part 3 Representation
of magnetic rocks
Hydraulic props
Link bars used in mines
Mine tub couplings and drawbars Part 1 General
IS 8534 : Part 2
IS 8534 : Part 3
IS 8534 : Part 4
IS 8534 : Part 5
IS 9123
IS 9170 : Part 1
IS 8534 : Part 6
IS 9171
IS 9192
IS 9203 : Part 1
IS 9203 : Part 2
IS 9203 : Part 3
IS 9203 : Part 4
IS 9227
IS 9239
IS 9494
IS 9910
IS 9999
IS 10046
IS 10202
IS 10970
IS 11311
IS 11862
IS 11922
IS 12450 : Part 1
IS 12464
IS 12488
IS 12526
IS 12489
requirements
Mine tub couplings and drawbars: part 2 C link and
D-shackle type
Mine tub couplings and drawbars Part 3 R-Shackle
and link type
Mine tub couplings and drawbars Part 4 F-Shackle
and link type
Mine tub couplings and drawbars: Part 5 Drawbars
Battery locomotives for use in mines
Endless haulage clips: Part 1 General requirements
Mine tub couplings and drawbars: Part 6 Hook and
D-shackle type
Code of practice for maintenance and use of friction
and hydraulic props and link bars
Flame proof hand-held rotary drilling machine for
use in mines
Friction rollers for mine haulage tracks: Part 1
Technical supply conditions
Friction rollers for mine haulage tracks: Part 2
Parallel rollers
Friction rollers for mine haulage tracks: Part 3
Tapered and vertical rollers and horizontal and
vertical pulleys
Friction rollers for mine haulage tracks: Part 4
Rollers with non-metallic rope bearings surfaces
Friction roller mountings for mine haulage tracks
Cast sheaves for winding in mines
Manriding cars used in mines
Method for braze strength testing of coal and rock
cutting tools with laid-on tungsten-carbide tips
Diesel locomotives for use in mines
Dog spikes for mine haulage tracks
scrapers used in mines
Keps for mine cages
Technical requirements for loaders for use in
underground mines
Hydraulic loadcell
Portable mine hoist
Steel headframes for mines Part 1 Principles of load
computation and applicable factors of safety
Methods of test for roof bars used in mines
Haulage rope cappels
Specification for bucket for shaft sinking operations
in mines
Recommendations for fitting terminal wire rope
IS 12527
IS 13163
IS 13201
IS 13202
IS 13210
IS 13220
IS 13230
IS 13282
IS 13517
IS 13618
IS 14352
IS 14480
IS 14567
IS 278
IS 1855
IS 1856
IS 2140
IS 2141
IS 2265
IS 2266
IS 2315
IS 2361
IS 2363
IS 2485
IS 2581
IS 2721
IS 2759
IS 3121
IS 3374
IS 3459
IS 3623
IS 3937 : Part 1
sockets by the cone and tail method
General requirements for riders for buckets used in
shaft sinking operations in mines
Mine haulage tracks - Laying - Code of practice
Mine haulage traacks - Rails and fish plates General requirements
Mine haulage tracks - General requirements
Mine haulage tracks - Switches and crossings General requirements
Friction props - Hydraulic setting device - General
requirements
Graphical symbols for use on mine plans
Mine haulage tracks - Track sleepers - General
requirements
Rock bolts - Resin type - Specification
Mine haulages - Direct rope (50 to 150 kW) General requirements
Miners safety goggles - Specification
Side dump loader (SDL) - Operation and
maintenance - Code of practice
Winding in mines - Design of cages - Guideline
Galvanized steel barbed wire for fencing
Stranded steel wire ropes for winding and man
riding haulages in mines
Steel wire ropes for haulage purposes
Stranded galvanized steel wire for fencing
Hot dipped galvanized stray strand - Specification
Galvanized steel wire strand for signalling purpose
Steel wire ropes for general engineering purposes
Thimbles for wire ropes
Bulldog grips - Specification
Glossary of terms relating to wire ropes
Drop forged sockets for wire ropes for general
engineering purposes
Round strand galvanized steel wire ropes for
shipping purposes
Galvanized steel chain link fence fabric
Higher tensile steel point hooks for use with wire
rope thimbles
Rigging screws and stretching screws
Preformed steel wire ropes for aircraft controls
Small wire ropes
Guide and rubbing ropes
Recommendations for socketing of wire ropes:Part 1
Socketing with zinc
IS 3937 : Part 2
IS 3937 : Part 3
IS 3973
IS 4507
IS 5202
IS 5203
IS 5245 : Part 1
IS 5836
IS 6594
IS 9282
IS 10891 : Part 1
IS 10891 : Part 2
IS 10942
IS 12694
IS 10887
IS 12735
IS 12776
IS 13870 : Part 1
IS 13902 : Part 1
IS 13902 : Part 2
IS 13902 : Part 3
IS 13917
IS 3971
IS 4300
IS 5325
IS 6219
IS 6566
Recommendations for socketing of wire ropes:Part 2
Socketing with white metal
Recommendations for socketing of wire ropes Part 3
Socketing with resins
Code of practice for the selection, installation and
maintenance of wire ropes
Yacht ropes
Flat hoisting wire ropes used in mines
Flat balancing wire ropes use in mines
Methods for splicing of wire ropes Part 1 Hand
splicing of wire ropes
Inner wire ropes for automobile control cables
Technical supply conditions for steel wire ropes and
strands
Wire ropes and strands for suspension bridges
Steel wire ropes for aerial ropeways Part 1 Haulage
ropes
Steel wire ropes for aerial ropeways Part 2 Track
ropes
Ferrules
Large diameter steel wire ropes
Steel wire rope for winches and ropeways used in
forestry and agriculture
Wire rope slings - Safety criteria and inspection
procedures for use
Galvanized strand for earthing
Cranes and lifting appliances - Selection of wire
ropes Part 1 General
Sockets for wire ropes for general purposes: Part 1
General characteristics and conditions of acceptance
Socket for wire ropes for general purposes: Part 2
Special requirements for sockets produced by
forging or machined from the solid
Socket for wire ropes for general purposes: Part 3
Special requirements for sockets produced by
casting
Stranded wire ropes for mine hosting - Technical
delivery requirements
Glossary of terms on pallets
Box pallets for through transit of goods Specification
Test procedure for box pallets and post pallets
Test code for non-expendable flat pallets
Series 1 Freight containers - Classification,
dimensions and ratings
IS 6569
IS 6928
IS 7276
IS 7622
IS 7694
IS 7804
IS 8005
IS 8006
IS 9208
IS 9340
IS 9881
IS 10880
IS 11076
IS 11466 : Part 1
IS 11466 : Part 2
IS 11982
IS 11983
IS 13112
IS 13288 : Part 1
IS 13288 : Part 2
IS 13288 : Part 3
IS 13608
IS 13609
IS 13664
IS 13699
IS 13288 : Part 4
IS 13288 : Part 5
IS 13288 : Part 6
Freight containers - Terminology
Freight containers - Coding identification and
marking
Non-expendable general purpose, flat pallets for
through transit of goods - Specification
Series 1 freight containers - Handling and securing
Corner fittings for ISO series 1 freight containers
Guide for palletization of tea chests
Classification of unit loads
Recommendations for handling of timber pallets
Guide for palletization of mica for export
Expendable pallets - Specification
Spreaders for series 1C and 1CC ISO series 1 freight
containers
Twistlocks for lifting freight containers
Guide for palletization of cashew kernels for export
Guidelines for packing, stowage and securing of
cargo inside the freight containers, Part 1 General
cargo
Guidelines for packing, stowage and securing of
cargo inside the freight containers, Part 2 Dangerous
goods
Design rating and safe working load for general
purpose flat pallet for through transit of goods
Guidelines for marking of general purpose flat
pallets for through transit of goods
Cargo securing systems for general purpose freight
containers - General requirements
ISO series 1 General cargo freight containerrs for
general purpose Part 1 General requirements
Series 1 freight containers - Specification and testing
part 2 Thermal containers
Series 1 freight container - Specification and testing
Part 3 Tank containers for liquid and gases
Sheet pallets - Specification
Pallets - Quality of timber - Guidelines
Polly pallets for bag storage godowns - Specification
Freight containers - Automatic identification
Series 1 Freight containers - Specification and
testing Part 4 Non-pressurized containers for dry
bulk
Series 1 freight containers - Specification and testing
Part 5 Platform (containers)
Series 1 freight containers - Specification and testing
Part 6 Platform based containers, open sided, with
IS 13546
IS 13697
IS 13698 : Part 1
IS 13698 : Part 2
IS 13714
IS 13731 : Part 1
IS 13731 : Part 3
IS 13823
IS 7073 : Part 1
IS 7073 : Part 2
IS 7074
IS 8396
IS 8589
IS 8169
IS 8762
IS 10195
IS 10196
IS 10494
IS 10515
IS 10869 : Part 1
IS 10869 : Part 2
IS 11165
IS 11167
IS 11436
complete superstructure
General purpose flat pallets for through transit of
goods - Performance requirements
Series 1 Freight containers - Interface connections
for tank containers
Freight container - Information related containers on
board vessels Part 1 Bay plan system
Freight containers - Information related containers
on board vessels Part 2 Telex data transmission
Dunnage pallets - Ware housing - Specification
Freight containers - Container equipment data
exchange (CEDEX) Part 1 General communication
codes
Freight containers - Container equipment data
exchange (CEDEX) Part 3 Message types for
electronic data interchange
Guidelines for palletization - General cargo
Glossary of terms relating to air cargo pallets and
containers, Part 1 Air cargo pallets
Glossary of terms relating to air cargo pallets and
containers Part 2 Air cargo containers
Air cargo equipment - Interline pallets
Specification for air cargo base sandwich panel
Aircraft pallets - Nets to secure cargo - Specification
Air cargo equipment - Base restrained certified
containers exclusively for the lower deck of high
capacity air craft
General requirements and testing of certified half
size lower deck container for high capacity aircraft
General requirements for insulated air cargo
containers
Guidelines for transportation of dead body and
cremated remains of human beings by air
General requirements for air cargo loading
equipment
General requirements of main deck container/pallet
loader for air craft
Specification for igloo, Part 1 Non-structural igloo
Specification for igloo, Part 2 Structural igloo
Specification for aircraft seat rails and pins
Air craft - Wide body air craft lower deck
container/palllet loader - Functional requirements
General requirements for ground handling and
transport systems equipment for air cargo unit load
devices
IS 11437
IS 11438
IS 11499
IS 11553
IS 11554
IS 12524
IS 12545
IS 12546
IS 12462
IS 12559
IS 12603
IS 12678
IS 12842
IS 12863
IS 13259
IS 13908
IS 14388
IS 14389
IS 14431
IS 14432
IS 14576
IS 807
IS 2429 : Part 1
IS 2758
IS 3813
IS 3938
IS 4178
'
Ground equipment requirements for compatibility
with air craft unit load devices
Functional requirements for air cargo unit load
devices transport vehicles
Air and air/land cargo pallets - Specification and
testing
Specification for airland cargo pallet nets
Methods of test for airland cargo pallet nets
General requirements for main deck baggage
container loader
Methodology of calculating aircraft cargo volumes
Basic safety requirements for air cargo loading
equipment
Functional requirements for self propelled gantry for
lifting air cargo container and outside cargoes
Functional requirements for self-propelled
conveyor-belt loader
General requirements for future widebody air craft
cargo-systems and components (Intermodal)
Aerospace - Ground equipment - Graphical symbols
for operators
The down fittings - Aircraft net assemblies Specification
Symbol for the pictorial standardization of aircraft
cargo handling system for unit load devices
Aircraft tow tractors - Performance requirements
Aircraft unit load devices - Loading and securing
cargo - Guidelines
Air craft - Lower-deck turn-table containers dolley Functional requirements
Air cargo - Pallet dolley - Functional requirements
Air craft - Ambulift - Functional requirement
Airport passanger bus - Functional requirements
Air craft - Self-propelled passanger stairs for large
capacity air craft - Functional requirements
Code of practice for design, manufacture, erection
and testing (structural portion) of cranes and hoists
Round steel short link chains (electric butt welded),
Grade L(3), Part 1 Non-calibrated load chains for
lifting purposes
Mild steel point hooks for use with wire rope
thimbles
C' hooks for use with swivels
Electric wire rope hoists
Eyenuts with collars
IS 4190
IS 3109 : Part 1
IS 3109 : Part 2
IS 4137
IS 4531 : Part 2
IS 4531 : Part 3
IS 4573
IS 4594
IS 5616
IS 5629
IS 5729
IS 6168
IS 6215
IS 6217
IS 6294
IS 6498
IS 6511
IS 6521 : Part 1
IS 6547
IS 6549
IS 7847
IS 7865
IS 8324
IS 8610
IS 9507
IS 10131
'
Eyebolts with collars
Short link chain, Grade M (4), Part 1 Non-calibrated
load chain for lifting purposes
Short link chain, Grade M (4), Part 2 Calibrated load
chain for pulley blocks and other lifting appliances
Code of practice for heavy duty electric overhead
travelling cranes including special service machines
for use in steel work
Swivels: Part 2 Dimensions of bow piece
Swivels: Part 3 Dimensions of eye
Power driven mobile cranes
Code of practice for design of portal and semiportal
wharf cranes (electrical)
Short link chain for lifting purposes general
conditions of acceptance
Mild steel forged triangular lifting eyes
Treble swivel assembly for ships' union purchase
C' hoooks with eye for marine purposes
Shork link chain, Grade T (8) non-calibrated for
lifting purposes
Short link chain, Grade S (6) non-calibrated for
lifting purposes
Point hooks with shank (for capacities 63 tonnes to
100 tonnes)
Glossary of terms used in connection with pulley
blocks
Range of preferred safe working loads for cranes,
lifting appliances and related excavators equipment
Code of practice for design of tower cranes:Part 1
Static and rail mounted
Electric chain hoists
Glossary of terms used in connection with lifting
tackle
General characteristics of lifting hooks
General requirements of 8 tonnes hooks for lifting
ISO series 1 freight containers of upto 30 tonnes
capacity
Code of practice for safe use and maintenance of
non-calibrated round steel lifting chains and chain
slings
Point hooks with shank capacity upto 25 tonnes
trapezoidal section
Specification for general purpose electric power
driven winches for lifing and hauling
Round steel link chain (electric butt welded) for
IS 11340
IS 13058
IS 13156
IS 13308
IS 13367 : Part 1
IS 13473 : Part 1
IS 13473 : Part 2
IS 13473 : Part 3
IS 13558 : Part 1
IS 13558 : Part 2
IS 13558 : Part 3
IS 13572 : Part 1
IS 13583 : Part 1
IS 13834 : Part 2
IS 13558 : Part 4
IS 13558 : Part 5
IS 13559 : Part 1
IS 13559 : Part 4
IS 13834 : Part 3
IS 13834 : Part 4
IS 13834 : Part 5
IS 14467
IS 14468
IS 14469
IS 14470
IS 14471
IS 14472 : Part 5
IS 14473 : Part 1
IS 14475 : Part 1
IS 5007
IS 5387
IS 7261
bucket - elevators
Ratchet lever hoists
Calibrated round steel link lifting chains Guidelines for proper use and maintenance
Sheave pulley blocks for wire rope_- Specifications
Lifting appliances - Sheaves - Technical supply
conditions
Safe use of cranes - Code of practice Part 1 General
Cranes - Vocabulary Part 1 General
Cranes - Vocabulary Part 2 Mobile cranes
Cranes - Vocabulary, Part 3 Tower cranes
Cranes - Controls - Layout and characteristics:Part 1
General principles
Cranes - Controls - Lyout and Characteristics - Prt 2
Mobile Cranes
Cranes - Control - Layout and characteristics - Part 3
Tower cranes
Cranes - Crane driving manual: Part 1 General
Cranes - Training of drivers: Part 1 General
Cranes - Classification: Part 2 Mobile cranes
Cranes - Controls - Layout and characteristics: Part
4 Jib cranes
Cranes - Controls - Layout and characteristics: Part
5 Overhead travelling cranes and postal bridge
cranes
Cranes - Information to be provided, Part 1 General
Cranes - Information to be provided Part 4 Jib cranes
Cranes - Classification Part 3 Tower Cranes
Cranes - Classification: Part 4 Jib cranes
Cranes - Classification: Part 5 Overhead travelling
and portal bridge cranes
Cranes - Wind load assessment
Cranes other than mobile and floating cranes General requirements for stability
Mobile cranes - Determination of stability
Cranes - Test code and procedures
Cranes and lifting appliances - Technical
characteristics and acceptance documents
Cranes - Information to be provided Part 5 Overhead
travelling cranes and portal bridge cranes
Cranes - Inspections Part 1 General
Cranes - Condition monitoring Part 1 General
Dimensions for hand pallet trucks
Dimensions for stillages
Dimensions of top-plates for castors
IS 7369
IS 8015
IS 6839 : Part 1
IS 6839 : Part 2
IS 8016
IS 8049
IS 10223
IS 10506
IS 10525
IS 11496
IS 12359
IS 12402 : Part 1
IS 12402 : Part 2
IS 13076
IS 13811
IS 13951
IS 14130
IS 3196 : Part 1
IS 3710
IS 3745
IS 4093
IS 3196 : Part 2
IS 3196 : Part 3
IS 4152
IS 4379
IS 4784
Specification for wheels and castors
Hand trolley for oil drums
Glossary of terms relating to non-powered materials
handling equipment, Part 1 Castors and wheels
Glossary of terms relating to non-powered materials
handling equipment, Part 2 Hand trucks and trolleys
Hand trolley for gas cylinders (oxygen and dissolved
acetylene) for industrial use
Specification for platform trucks
General requirements for tow-castors system for
transportation of freight containers
Trolleys for carrying jute bales - Specification
Specification for general purpose drinking water
trolley
General and performance test requirements of pallet
truck and stillage truck
Guide for selection of wheels and castors
Mobile containers for solid waste, Part 1 General
characteristics
Mobile containers for solid waste, Part 2 Methods of
test
Specification for hand trolley for carrying mail bags
Air cargo (bulk) trolley - Specification
Heavy item lift platform for Aircraft/Airport
operations - General requirements
Hydraulic lifting table - Specification
Welded low carbon steel gas cylinder exceeding 5
litre water capacity for low pressure liquefiable
gases Part 1 Cylinders for liquefied petroleum gas
(LPG)
Filling ratios for low pressure liquefiable gas
Yoke type valve connections for small medical gas
cylinders
Non-refillable liquefied petroleum gas containers
Welded low carbon steel gas cylinder exceeding 5
litre water capacity for low pressure liquefiable
gases Part 2 Cylinders for liquefiable gases other
than LPG
Welded low carbon steel gas cylinder exceeding 5
litre water capacity for low pressure liquefiable
gases Part 3 Methods of test
Carbon di-oxide cylinders for fire fighting purposes
on boardship
Identification of contents of industrial gas cylinders
Low pressure regulators for use with butane gases
IS 5845
IS 5903
IS 7142
IS 7202
IS 7241
IS 7285
IS 7302
IS 7312
IS 7680
IS 7681
IS 7682
IS 8452
IS 8868
IS 8198 : Part 1
IS 8198 : Part 2
IS 8198 : Part 3
IS 8198 : Part 4
IS 8198 : Part 6
IS 8198 : Part 7
IS 8198 : Part 8
IS 8198 : Part 9
IS 8198 : Part 10
IS 8198 : Part 11
IS 8198 : Part 12
Code of practice for inspection of low pressure
welded steel gas cylinders other than LPG cylinders
in use
Recommendations for safety devices for gas
cylinders
Welded low carbon steel cylinders for low pressure
liquifiable gases not exceeding 5 litre water capacity
- Specificatiom
Inspection gauges for checking threads of gas
cylinder valves for use with breathing apparatus
Glossary of terms used in gas cylinder technology
Seamless steel cylinders for permanent and high
pressure liquefiable gases
Valve fittings for gas cylinder valves for use with
breathing apparatus
Welded and seamless steel dissolved acetylene gas
cylinders - Specification
Welded low carbon steel gas cylinders for ammonia
(anhydrous) gas
Welded low carbon steel gas cylinders for chlorine
gas
Welded and seamless steel gas cylinders for methyl
bromide gas
Glossary of terms used in acetylene generators
Periodical inspection interval of gas cylinders in use
Code of practice for steel cylinders for compressed
gases Part 1 Atmospheric gases
Code of practice for steel cylinders for compressed
gases Part 2 Hydrogen gas
Code of practice for steel cylinders for compressed
gases Part 3 High pressure liquefiable gases
Code of practice for steel cylinders for compressed
gases:Part 4 Dissolved acetylene gas
Code of practice for steel cylinders for compressed
gases Part 6 Liquefied chlorine gas
Code of practice for steel cylinders for compressed
gases Part 7 Ammonia gas
Code of practice for steel cylinders for compressed
gases Part 8 Common organic refrigerant gases
Code of practice for steel cylinders for compressed
gases Part 9 Sulphur dioxide gas
Code of practice for steel cylinders for compressed
gases Part 10 Methyl bromide gas
Code of practice for steel cylinders for compressed
gases Part 11 Methyl chloride gas
Code of practice for steel cylinders for compressed
IS 8433
IS 8451
IS 8471 : Part 1
SP 9
IS 2379
IS 8471 : Part 2
IS 8471 : Part 3
IS 8471 : Part 4
IS 8471 : Part 5
IS 8737
IS 8775
IS 8776
IS 8866
IS 8867
IS 9121
IS 9122
IS 9199
IS 11006
IS 12300
IS 13497
IS 9639
gases Part 12 Gases for medical use
Code of practice for visual inspection of dissolved
acetylene gas cylinders
Code of practice for visual inspection of high
pressure gas cylinders
Requirements for acetylene generators Part 1 Low
pressure, stationary, of water to-carbide and carbide
to water type
Technical data sheet for gases conveyed in cylinders
Colour code for identification of pipe lines
Requirements for acetylene generators Part 2 Low
pressure, portable, of water-to-carbide type
Requirements for acetylene generators Part 3 Low
pressure, portable, of carbide-to-water type
Requirements for acetylene generators Part 4
Medium pressure, stationary, of water-to-carbide
and carbide-to-water type
Requirements for acetylene generators Part 5
Medium pressure, portable, of water-to-carbide and
carbide-to-water type
Valve fittings for use with liquefied petroleum gas
(LPG) cylinders of more than 5 litre water capacity Specification
Filling pressure and corresponding developed
pressure for permanent gases contained in gas
cylinders
Valve fittings for use with liquefied petroleum gas
(LPG) cylinder up to and including 5 litre water
capacity
Filling ratios and corresponding developed pressure
for high pressure liquefiable gases contained in gas
cylinder
Saturated vapour pressure and test pressure for low
pressure liquefiable gases contained in gas cylinders
Inspection gauges for checking type 1 (size 2) taper
threads of gas cylinder valves, taper 1 in 16
Inspection gauges for checking type 2 taper threads
of gas cylinder valves, taper 3 in 25
Inspection gauges for checking taper threads of gas
cylinder valves, type 3, taper 60 degree include
angle
Flash back arrestor (flame arrestor)
Valve fittings for small freon cylinders
Fusible plug for dissolved acetylene gas cylinder Specification
Code of practice for visual inspection of low
IS 9687
IS 12586
IS 12936
IS 13258
IS 2843
IS 2844
IS 3030
IS 3132
IS 3133
IS 3232
IS 3233
IS 3612
IS 4049 : Part 1
IS 4110
IS 4179
IS 4254
IS 4255
IS 4642
IS 4049 : Part 2
IS 4092 : Part 1
IS 4682 : Part 1
IS 4682 : Part 2
IS 4682 : Part 3
pressure welded steel gas cylinders during
manufacture
Inspection gauges for checking type 1 (size 1) taper
threads of gas cylinder valves taper 1 in 16
Brazed low carbon steel gas cylinders not exceeding
13 litre water capacity
Code for basic requirements for delivery persons
engaged in the delivery of LPG cylinders
welded low carbon steel cylinders exceeding 5 litre
water capacity for low pressure liquefiable gas Code of practice for inspection and reconditioning of
used LPG cylinders
Recommendation on nominal capacities for process
equipment
Recommendation on nominal diameter for process
equipment
Recommendation for letter symbols, signs and
abbreviations used in chemical engineering
3ecommendations for shaft diameter for chemical
equipment
Manhole and inspection openings for chemical
equipment - General requirements
Recommendations on graphical symbols for process
flow diagrams
Glossary of terms for safety and relief valves and
their parts
Crushing and grinding equipment - Classification
and methods for measuring capacity
Formed ends for tanks and pressure vessels Part 1
Based on outside diameter basis
Glossary of terms used in high vacuum technology
Sizes of process vessels and leading dimensions
Jaw crushers - General requirements
Gyratory and cone crushers
Ball pebble and tube mills
Formed ends for tanks and pressure vessels Specification Part 2 Based on inside diameter basis
Centrifuges of the basket and bowl and vibrating
type for use in industrial and commercial application
Part 1 General requirements
Code of practice for lining of vessels and equipment
for chemical processes Part 1 Rubber lining
Code of practice for lining of vessels and equipment
for chemical processes Part 2 Glass enamel lining
Code of practice for lining of vessels and equipment
for chemical processes Part 3 Lead lining
IS 4682 : Part 4
IS 4682 : Part 5
IS 4682 : Part 6
IS 4682 : Part 8
IS 4682 : Part 10
IS 4854 : Part 1
IS 4854 : Part 3
IS 5036
IS 5428 : Part 1
IS 5428 : Part 3
IS 5428 : Part 2
IS 5428 : Part 4
IS 5428 : Part 5
IS 5675
IS 6034
IS 6076
IS 6088
IS 6157
IS 6202
IS 6838
IS 6849 : Part 1
IS 6849 : Part 2
IS 6849 : Part 3
IS 7366
Code of practice for lining of vessels and equipment
for chemical processes Part 4 Plasticised PVC lining
Code of practice for lining of vessels and equipment
for chemical processes Part 5 Epoxide resin lining
Code of practice for lining of vessels and equipment
for chemical processes Part 6 Phenolic resin lining
Code of practice for lining of vessels and equipment
for chemical processes Part 8 Precious metal
Code of practice for lining of vessels and equipment
for chemical processes Part 10 Brick and tile
Glossary of terms for valves and their parts: Part 1
Screw down stop check and gate valve and their
parts
Glossary of terms for valves and their parts: Part 3
Butterfly valves
Filter presses recessed plate type and plate and
frame type
Gauge glasses:Part 1 Tubular glasses for level
gauges
Gauge glasses:Part 3 Through vision and reflex
glasses
Gauge glasses: Part 2 Protector glasses for tubular
gauge glasses
Gauge glasses:Part 4 Circular sight and light glasses
Part 5 Port gauge glasses as used in fittings for
steam boilers
Rotary-disk vacuum filters
Insulating oil conditioning plants - Specification
Vacuum technology - Flange dimensions
Oil-to-water heat exchangers for transformers
Valve inspection and test
Flat glass oil level gauges for oil storage tanks
Dimensions for `O' rings and grooves for vacuum
flanges
Positive-displacement vacuum pumps Measurement of the performance characteristics Part
1 Measurement of the volume rate of flow (pumping
speed)
Positive displacement vacuum pumps Measurement of performance characterstics Part 2
Measurement of ultimate pressure
Methods of measurement of the performance
characteristics of positive-displacement vacuum
pumps Part 3 Water vapour pumping capacity
Edge type filters required for filtration of oils of
straight mineral type
IS 8243 : Part 1
IS 8245
IS 8280
IS 8288
IS 8576
IS 8243 : Part 2
IS 8244
IS 8262 : Part 1
IS 8262 : Part 2
IS 8276 : Part 1
IS 8577
IS 8578
IS 8579
IS 8580
IS 8581
IS 8582
IS 8659
IS 8660
IS 8667
IS 9082
IS 9083
IS 9084
IS 9151
IS 9240
IS 9241
IS 9254
IS 9260
IS 9289
IS 9309
IS 9446
Vapour vacuum pumps - Measurement of
performance characteristics:Part 1 Measurement of
volume rate of flow (pumping speed)
Graphical symbols for vacuum technology
Methods of calibration of ionization vacuum gauges
Bakeable flanges
Purchaser's data sheet for general purpose dryers
Vapour vacuum pumps - Methods of measurement
of performance characteristics Part 2 Measurement
of critical backing pressure
Methods of calibration of vacuum gauges by direct
comparison with reference gauge
Quick release couplings for vacuum pipe lines Part 1
Screwed type
Quick release couplings for vacuum pipe lines Part 2
Clamped type
Methods for calibration of vacuum gauges:Part 1
Pressure reduction by continuous flow in the
pressure range of 10-1 to 1-5 Pa
Purchaser's data sheet for rotary vacuum filters
Purchaser's data sheet for pulverizers
Purchaser's data sheet for crystallizers
Supplier's data sheet for vibrating screens
Supplier's data sheet for cooling towers for process
industry
Supplier's data sheet for basket type centrifuges
Purchaser's data sheet for basket type centrifuges
Purchaser's data sheet for vibrating vibrators for use
with bin and hopper
Purchaser's data sheet for cooling towers for process
industry
Purchaser's data sheet for bursting discs and
assemblies
Purchaser's data sheet for rubber lined tanks
Recommendation for nominal capacities for fluid
storage spherical tanks
Glossary of terms for process equipment
Purchaser's data sheet for gas scrubber cooler or
absorber
Purchaser's data sheet for electrostatic precipitators
Supplier's data sheet for electrostatic percipitators
Supplier's data sheet for crystallizer
Purchaser's data sheet for agitators
Roller crusher
Graphical symbols for pipelines and instrumentation
IS 9520
IS 9522
IS 9539
IS 9540
IS 9578
IS 9579
IS 9580
IS 9602
IS 9618
IS 9625
IS 9705 : Part 1
IS 9866
IS 9884
IS 9890
IS 10092
IS 10120
IS 10123
IS 10217
IS 10218
IS 10219
IS 10247
IS 10409
IS 10444
IS 10459
IS 10470
IS 10605
IS 10611
IS 10661
IS 10688
IS 10732
IS 10843
IS 10873
diagrams
Nominal sizes for valves
Code of practice for agitator equipment
Purchaser's data sheet for solid bowl scroll discharge
centrifuges
Purchaser's data sheet for plate and frame filters
Purchaser's data sheet for liquid/solid separation
centrifuges
Supplier's data sheet for hammer mills
Purchaser's data sheet for hammer mills
Supplier's data sheet for agitators
Road tankers for liquefied petroleum gas
Locations of by-pass and drain connections for
valves
Quick release couplings for vacuum pipe lines Part
1: Screwed couplings type `B'
Marking system for valves
Dimensions for ferrous valves - face to face and end
to end
General purpose ball valves
Glossary of terms (and materials of construction) for
rotary equipment
Supplier's data sheet for rotary dryers
Data sheet for shell and tube type heat exchangers
Method of determination of crushability index
Method of determination of grindability index
Purchaser's data sheet for tube nest evaporation
plants
Method of determination of impact index
Purchaser's data sheet for rotary type dryer
Hammer mills
General purpose plug valves
Air cooled heat exchangers
Steel globe valves (flanged and butt welded ends)
for petroleum, petrochemical and allied industries Specification
Steel gate valves (flanged and butt welded ends) for
petroleum, petrochemicals and allied industries
Glass fibre reinforced polyester chemical resistant
tanks
Method for proving gas tightness of vacuum plant
Purchaser's data sheet for gauge glasses for pressure
vessels
Glossary of terms for crushers
Data sheet for air-cooled heat exchangers
IS 10874
IS 10875
IS 10989
IS 11132
IS 11332
IS 11552
IS 11555 : Part 1
IS 11555 : Part 2
IS 11556
IS 11564
IS 11565
IS 11572
IS 11611
IS 11620
IS 11699
IS 11733
IS 11790
IS 11791
IS 11792
IS 12213
IS 12273
IS 12355
IS 12357
IS 12370
IS 12754 : Part 1
IS 12754 : Part 2
IS 12754 : Part 3
Felsite grinding media and liner stones
Glossary of terms and material of construction for
rotary dryers and coolers
Cast or forged steel check valves (flanged or buttwelding ends) for petroleum, per trochemicals,
chemical and allied industries
Ammonia valves
Code of practice for industrial ovens
Liquid nitrogen vessels of capacity up to 50 litres
Designer's data sheet:Part 1 Mechanical design of
columns
Designer's data sheet:Part 2 Column internal
Purchaser's data sheet for distillation columns
Supplier's data sheet for fluid bed dryers
Data sheet for industrial ovens
Purchaser's data sheet for fluid bed dryers
Fire test for valves (including soft seated quarter
turn valves) - Method of test
Code of practice for fluid bed-dryer
Steel plug valves for petroleum, petrochemical and
allied industries
Specification for steel wedge gate globe and check
valves for petroleum, perochemical and allied
industries (nominal size 50 mm and smaller)
Code of practice for preparation of butt-welding
ends for pipes, valves flanges and fittings
Diaphragm type valves for general purposes
Steel ball valve for the petroleum petrochemical and
allied industries
Code for mechanical vibrating screens
Industrial oil fired burners
Supplier's data sheet for vibrators for use with bin
and hopper
Supplier's data sheet for clean air equipments
(laminar flow)
Bursting discs and bursting disc devices
Process measurement control functions and
instrumentation - Symbolic representation Part 1
Basic requirements
Process measurement control functions and
instrumentation - Symbolic representation Part 2
Extension of basic requirements
Process measurement control functions and
instrumentation - Symbolic representation Part 3
Detailed symbols for instrument interconnection
IS 12962
IS 12995
IS 12754 : Part 4
IS 12992 : Part 2
IS 13095
IS 13187
IS 13306
IS 2093
IS 2094
IS 2438
IS 2439
IS 2514
IS 2722
IS 3251
IS 3251 : Part 2
IS 3365
IS 3559
IS 4183
IS 4198
IS 4616
IS 4656
IS 4925
IS 5435
IS 5436
IS 5500
IS 5500 : Part 2
IS 5501
IS 5502
diagrams
Data sheet for basic engineering plant design
Process/basic engineering/knowhow packages - data
sheet
Process measurement control functions and
instrumentation - Symbolic representation Part 4
Basic symbols for process computer, interface and
shared display
Spring loaded safety relief valves - Specification
Part 2 Testing
Butterfly valves for general purposes
Road tankers for light petroleum products Specification
Oil and gas fired thermic fluid heaters - Method of
calculation of film temperatures
Specification for distributors for hot tar and bitumen
Specification for heater for bitumen (Tar) and
emulsion - Specifications
Specification for roller pan mixer
Specification for metal hand rollerls (fixed weight
type)
Specification for concrete vibrating tables
Specification for portable swing weigh batchers for
concrete (single and double bucket type)
Specification for asphalt paver finishers
Asphalt paver finisher - General requirements Part 2
Hydraulic
Specification for floor polishing machines
Specification for pneumatic concrete breakers
Specification for metal hand rammers
Specification for emulsion spraying machine for
roads
Specification for sheepsfoot roller
Specification for form vibrators for concrete
Specification for concrete batching and mixing plant
General requirements for cold asphalt macadam
mixing plants
Method of testing oil-fired rotary dryers for hot mix
asphalt and bituminous macadam plants
Specification for vibratory rollers
Vibratory roller - General requirements Part 2 Self
propelled heavy duty single drum
Specification for pneumatic tyred roller
General requirements for smooth-wheeled diesel
road roller
IS 5889
IS 5890
IS 5891
IS 5892
IS 6426
IS 6428
IS 6433
IS 7242
IS 7245
IS 7251
IS 11386
IS 11391
IS 12466
IS 13291
IS 13404
IS 14362
IS 5120
IS 5600
IS 5639
IS 6536
IS 7347
IS 10000 : Part 1
IS 10000 : Part 2
IS 10000 : Part 3
IS 10000 : Part 5
IS 10000 : Part 6
IS 10000 : Part 7
IS 10000 : Part 8
IS 10000 : Part 9
Vibratory plate compactor - Specification
Specification for mobile hot mix asphalt plants, light
duty
Specification for hand-operated concrete mixer
Specification for concrete transit mixers and
agitators
Specification for pile driving hammer
Specification for pile frame
Specification for guniting equipment
Specification for concrete spreaders
Specification for concrete pavers
Specification for concrete finishers
Glossary of terms relating to concrete mixers
General requirements for single vibratory roller,
towed type
General requirements for builder's hoist
Concrete block making machine - General
requirements
Power trowel - General requirements
Pile boring equipment - General requirements
Technical requirements for rotodynamic special
purpose pumps
Sewage and drainage pumps
Pumps handling chemicals and corrosive liquids
Pumps for handling volatile liquids
Performance of small size spark ignition engines for
agricultural sprayers and similar applications
Method of tests for internal combustion engines:
Part 1 Glossary of terms relating to test methods
Methods of tests for internal combustion engines:
Part 2 Standard reference conditions
Methods of tests for intrnal combustion engines: Part
3 Measuremnts for testing units and limits of
accuracy
Methods of tests for intrnal combustion engines: Part
5 Preparation for tests and measurements for wear
methods of tests for internal combustion engines:
Part 6 Recording of test results
Methods of tests for internal combustion engines:
Part 7 Governing tests for constant sped engines and
selection of engines for use with electrical
generators
Methods of tests for internal combustion engines:
Part 8 Perfornance tests
Methods of tests for internal combustion engines:
IS 10000 : Part
10
IS 10000 : Part
11
IS 6596
IS 8034
IS 8472
IS 9079
IS 10001
IS 10002
IS 11170
IS 6595 : Part 1
IS 6595 : Part 2
IS 9137
IS 9201
IS 9542
IS 9694 : Part 2
IS 9694 : Part 3
IS 10572
IS 10596 : Part 1
IS 10804
Part 9 Endurance tests
Methods of tests for internal combustion engines:
Part 10 Test for smoke levels, limits and corrections
for smoke levels for variable speed compression
ignition engines
Methods of tests for internal combustion engines:
Part 11 Information to be supplied by the purchaser
to the manufacturer and information to be supplied
by the manufacturr alongwith the engine
Pumps for handling paper stock
Submersible pumpsets
Pumps - Regenerative or clear, cold water Specification
Monoset pumps for clear, cold water for agricultural
purposes
Performance requirements for constant speed
compression ignition (diesel) engines for general
purposes (up to 20 kW)
Performance requirements for constant speed
compression ignition (diesel) engines for general
purposes (above 20 kW)
Performance requirements for constant speed
compression ignition (diesel) engines for agricultural
purposes (up to 20 kW)
Horizontal centrifugal pumps for clear, cold water
Part 1 For agricultural and rural water supply
purposes
Horizontal centrifugal pumps for clear, cold water:
Part 2 General purposes other than agricultural and
rural water supply - Specification
Code for acceptance test for centrifugal, mixed flow
and axial pumps - Class C
Pumps for handling slurry
Horizontal centrifugal monoset pumps for clear,
cold, fresh water
Code of practice for the selection, installation,
operation and maintenance of horizontal centrifugal
pumps for agricultural application Part 2 Installation
Code of practice for the selection, installation,
operation and maintenance of horizontal centrifugal
pumps for agricultural applications Part 3 Operation
Method of sampling pumps
Code of practice for selection, installation, operation
and maintenance of pumps for industrial
applications: Part 1 Selection
Recommended pumping system for agricultural
IS 11382
IS 12225
IS 12469
IS 10596 : Part 2
IS 10596 : Part 3
IS 10596 : Part 4
IS 10805
IS 10981
IS 11501
IS 11745
IS 12699
IS 13139
IS 13518
IS 13537
IS 13538
IS 14220
IS 7156
IS 7209
IS 8110
IS 8986
IS 14536
IS 7206 : Part 1
IS 9439
purposes
Dimensions for stuffing box cavities of end-suction
process pumps
Centrifugal jet pump - Specification
Pumps for fire fighting applications
Code of practice for selection, installation, operation
and maintenance of pumps for industrial
applications: Part 2 Installation
Code of practice for selection, installation, operation
and maintenance of pumps for industrial
applications: Part 3 Operation
Code of practice for selection, installation, operation
and maintenance of pumps for industrial
applications: Part 4 Maintenance
Foot valves, reflux valves or non-return valves and
bore valves to be used in suction lines of agricultural
pumping systems
Class of acceptance test for centrifugal mixed flow
and axial pumps - Class B
Engine monoset pumps for clear, cold, fresh water
for agriculture pumps
Technical supply conditions for positive
displacement pumps - reciprocating
Code of practice for selection, installation, operation
and maintenance of jet centrifugal pump
combination
End suction centrifugal pumps - Base plate and
installation - Dimensions
End suction centrifugal pumps (rating 16 bar) Designation, nominal duty point and dimensions
Technical specification for centrifugal pumps class 2
Centrifugal mixed flow and axial pumps - Code for
hydraulic performance tests - Precision class
Openwell submersible pumpsets
General requirements for reverse circulation drilling
rigs
General requirements for blast hole drilling rigs
Well screens and slotted pipes
Percussive drilling - Drilling steels in bar form Dimensions
Selection, installation, operation and maintenance of
submersible pump set - Code of practice
General requirements for direct circulation rotary
drilling rigs:Part 1 With rotary table
Glossary of terms used in waterwell drilling
technology
IS 10208
IS 11189
IS 11312 : Part 1
IS 11632
IS 11672
IS 11710
IS 11830 : Part 1
IS 11830 : Part 2
IS 12090
IS 12097
IS 12214
IS 12629
IS 4760
IS 5115
IS 5117
IS 5543
IS 12635
IS 12682
IS 4246
IS 5116
IS 5544
IS 5776
IS 5777
IS 6480
IS 7342
IS 8251
Diamond core drilling equipment
Methods for tubewell development
External upset drill pipe assemblies for use in
waterwell drilling:Part 1 Screwed on joints drill pipe
Code of practice of rehabilitation of tubewell
Tungsten carbide buttons and inserts for use in
Down-the-hole (DTH) bits
Code of practice for selection and design of diamond
core drills
Water well-drilling down-the-hole hammer rigs Part
1 General requirements for hydraulic rigs with or
without rotary mode
Water-well drilling - Down-the-hole hammer
rigs:Part 2 General requirements for pneumatic rigs
Dimensions of rotary tables for direct rotary drilling
equipment
Classification and selection of drilling rigs for
waterwell drilling
General requirements for rotary hose for water-well
drilling equipment
Water well drilling - Rotary hose for rotary drilling Recommended practice for care and use
Domestic cooking ranges for use with liquefied
petroleum gases
Domestic storage type water heaters for use with
LPG
Commercial boiling burners for use with LPG Specification
Bains marie for use with LPG
Water well drilling - Rock roller bit with non-sealed
ball and roller bearing arrangement - Technical
supply conditions
Waterwell drilling - Percussion drilling rigs General requirements
Domestic gas stoves for use with liquefied
petroleum gases - Specification
Domestic and commercial equipment for use with
LPG - General requirements
Hot food cabinets for use with LPG
Bulk water heaters for use with LPG
Fryers for use with LPG
Glossary of terms relating to domestic and
commercial gas-burning appliances
Commercial gas baking and roasting oven
Commercial cooking ranges including grillers for
IS 8749
IS 11241
IS 11480
IS 12011
IS 12012
IS 13432 : Part 1
IS 14612
IS 550 : Part 1
IS 550 : Part 3
IS 1046
IS 5244
IS 7152
IS 11188 : Part 1
IS 11188 : Part 2
IS 11188 : Part 3
IS 12187
IS 14387
IS 14505
IS 14512
IS 14561
IS 14562
IS 10039
IS 11122 : Part 1
IS 11122 : Part 2
IS 11122 : Part 3
IS 11122 : Part 4
IS 11175
use with LPG
Bio gas stove
Portable liquefied petroleum gas appliances
operating at vapour pressure
Domestic grillers for use with liquefied petroleum
gases - Specification
Code of safety practice for domestic LPG
installation
Gas taps with or without flame failure devise for
domestic and commercial gas burning appliances Specification
Gas leak detector for use with low pressure liquefied
petroleum gas burning appliances - Specification
Part 1 Mechanical type
Draft Indian Standard - Commercial burners using
LPG at inlet pressure upto 150 mbar - Specification
Safes: Part 1 Specification
Safes, Part 3 Tests for fire resistance
Cash boxes - Specifications
Safe deposit locker cabinets - Specification
Book room doors - Specifications
Vault (strong room) doors: Part 1 - Specification
Vault (Strong room) doors: Part 2 Test for burglary
resistance
Vault (Strong room) doors: Part 3 Tests for fire
resistance
Specification for coffers
Vaults - Air ventilators - Specifications
Fire resisting magnetic media protection cabinets Specification
Safe cum safe deposite lockers - Specification
Fire resisting (insulating) filing cabinets Specification
Fire resisting computer media protection cabinets Specification
Number printing machines, hand operated
Letter press printing plates and equipment Part 1
Original printing plates
Letter press printing plates and equipment Part 2
Flat metal duplicate plates
Letter press printing plates and equipment Part 3
Galleys
Letter press printing plates and equipment Part 4
Jobbing chases
Dimensions of metal lithographic plates
IS 11610
IS 12095
IS 12136
IS 12619
IS 1238
IS 1342
IS 2788
IS 2980
IS 13906
IS 3164
IS 9557
IS 10109
IS 11359
IS 11463
IS 11760
IS 12202
IS 11004 : Part 1
IS 11004 : Part 2
IS 12732
IS 13056
IS 13287
IS 14101
IS 14102
IS 14103
IS 14104
IS 14106
IS 919 : Part 1
IS 2473
IS 2540
IS 2769
IS 3403
IS 919 : Part 2
Rubber rollers for offset printing
Guidelines for metal plates for off-set machines
Classification of printing machines
Printing industry - Safety code
Hurricane lanterns
Oil pressure stoves
Gas mantles
Non-pressure stoves
Graphic technology - Sheet fed printing machines Range of sizes
Oil pressure lamps, hanging type
Wick lamps, non-pressure type
Oil pressure stoves, offset burner type
Wax candles
Blow lamp, petrol
Gravity-fed kerosene wick stove
Glossary of terms relating to oil burning appliances
(pressure type and non pressure type
Code of practice for installation and maintenance of
deepwell hand pumps Part 1 Installation
Code of practice for installation and maintenance of
deepwell handpumps Part 2 Maintenance
Deepwell handpumps - Nomenclature identification
annd packaging of components
Deepwell handpumps (VLOM) - Specification
Extra deepwell handpumps - Specification
Deepwell handpumps - Components - Cast iron Specification
Deepwell handpumps - Components - Leaded tin
bronze - Specification
Deepwell handpumps - Components - Mild steel Specification
Deepwell handpumps - Components - Nitrile rubber
- Specification
Direct action handpump - Specification
ISO Systems of limits and fits Part 1 Basis of
tolerance, deviations and fits
Dimensions for centre holes
Dimensions for threaded centre holes
Sizes for squares and square holes for general
engineering purposes
Dimensions for knurls
ISO systems of limits and fits Part 2 Tables of
standard tolerance grades and limit deviations for
holes and shafts
IS 2102 : Part 1
IS 2102 : Part 2
IS 7496
IS 3406 : Part 1
IS 3406 : Part 2
IS 7525
IS 7552
IS 3428
IS 3457
IS 3458
IS 4218 : Part 2
IS 4218 : Part 5
IS 7553
IS 7570
IS 7617
IS 7621
IS 4695 : Part 2
IS 8192
IS 7631
IS 4696 : Part 2
IS 7008 : Part 1
IS 7008 : Part 3
IS 7008 : Part 4
IS 7862
IS 8790 : Part 1
General tolerances Part 1 Tolerances for linear and
angular dimensions without individual tolerance
indications
General tolerances Part 2 Geometrical tolerances for
features without individual tolerance indications
Specification for direction of travel controls for
industrial tractors and powered industrial trucks
Dimensions for countersinks and counterbores Part 1
Countersinks
Simensions for countersinks and counterbores Part 2
Counterbores
Mounting dimensions for fork carriers and fork arms
for forklift trucks
Stability tests for trucks operating in special
conditions
Dimensions for relief grooves
Radii for general engineering purposes_
Conical tapers and taper angles for general
engineering purposes
ISO Metric screw threads Part 2 Dimeter pitch
combinations
ISO Metric screw threads Part 5 Tolerances
Control symbols for powered industrial trucks
Glossary of terms relating to fork arms and
attachments of forklift trucks
Code of practice for maintenance of forks for forklift
trucks
Tests for overhead guards of powered industrial
trucks
Knuckle screw threads Part 2 Devistions and
tolerances
Guide for selection of fitment bores for cylindrical
shaft ends
Pallets stackers and high lift platform trucks Method of stability tests
Dimensions for saw tooth threads Part 2 Pitch
diameter combinations
ISO Metric trapezoidal screw threads Part 1 Basic
profile and maximum material p
ISO Metric trapezoidl screw threads Part 3 Basic
dimensions
ISO Metric trapezoidal screw threads Part 4
Tolerances
Glossary of terms relating to safety aspects
concerning operating areas of industrial trucks
General requirements of powered industrial trucks
IS 8790 : Part 2
IS 7615
IS 7727
IS 8841
IS 9075
IS 9099 : Part 1
IS 11698 : Part 1
SP 42
IS 7840
IS 10164
IS 9099 : Part 2
IS 11698 : Part 2
IS 12241
IS 8000 : Part 1
IS 8000 : Part 2
IS 8000 : Part 3
IS 8000 : Part 4
IS 8930 : Part 1
IS 8976
IS 9609 : Part 2
IS 9609 : Part 3
IS 9609 : Part 4
working in hazardous areas, Part 1 Internal
combustion engines-powered trucks
General requirements of powered industrial trucks
working in hazardous areas, Part 2 Electric battery
powered industrial trucks
System of cone tolerances for conical workpieces
from C=1:3 to 1:500 and lengths from 6 to 630 mm
Limits of sizes for ISO metric trapezoidal bolt
threads (diameter range 105 t0 300 mm)
Recommendations for limits and fits for sizes above
3 150 mm upto 10 000 mm
Stability tests for side loader trucks
Performance testing of powered industrial trucks
working in hazardous areas, Part 1 Internal
combustion engine-powered trucks
ISO Miniature screw threads Part 1 Basic profile
Survey of screw threads
Technical drawings for glassware
Requirements to execute technical drawings for
microcopying
Performance testing of powered industrial trucks
working in hazardous areas, Part 2 Electric battery
powered industrial trucks
ISO Miniature screw threads Part 2 Basic
dimensions for design profiles
ISO general purpose metric screw threads - Selected
sizes for screw, bolts and nuts (to be withdrawl)
Geometrical tolerancing on Technical Drawings Part
1 Tolerances of form orientation, location and Runout and appropriate geometrical definitions
Technical drawings - Geometrical tolerancing Part 2
Maximum material principles
Technical drawings - Geometrical tolerancing Part 3
Dimensioning and tolerancing of profiles
Geometrical tolerancing on technical drawings Part
4 Practical examples of indications on drawings
Technical product documentation -vocabulary Part 1
Terms relating to technical drawings: General and
types of drawings
Guide for preparation and arrangement of sets of
drawings and parts lists.
Lettering on technical drawings Part 2 Greek
Characters
Technical drawings - Letterings Part 3 Diacritical
and particular marks for the latin Alphabet
Technical drawings - Lettering Part 4 Cyrillic
IS 10711
IS 10712
IS 10713
IS 10714
IS 9609 : Part 5
IS 10715
IS 10716
IS 10717
IS 10718
IS 10719
IS 10720
IS 10721
IS 10722 : Part 2
IS 10722 : Part 3
IS 10722 : Part 4
IS 10967
IS 10968
IS 10990 : Part 1
IS 10990 : Part 2
IS 11065 : Part 1
IS 11154 : Part 2
IS 11154 : Part 3
IS 11663
IS 11154 : Part 1
IS 11154 : Part 4
IS 11664
characters
Sizes of drawing sheets
Presentation of item references on technical
drawings
Scales for use in technical drawings
General principles of presentation on technical
drawings
Lettering on technical drawing - Amplified devnagri
characters
Presentation of threaded parts on technical drawings
Rules for representation of springs on technical
drawings
Conventional representation of gears on technical
drawings
Technical drawings - Dimensioning and tolerancing
of cones
Method of indicating surface texture on technical
drawings
Technical drawings for structural metal works
Datum and datum systems for geometrical
tolerancing on technical drawings
Graphical symbols for elements of kinematic
diagrams Part 2
Graphical symbols for elements of kinematic
diagrams Part 3
Graphical symbols for elements of kinematic
diagrams Part 4
Guide for preparation of varient drawings
Drawings practice for simplified presentation
Technical drawings - Simplified representation of
pipelines Part 1 General rules and orthogonal
representation
Technical drawings - Simplified representation of
pipelines Part 2 ISO metric projections
Drawing practice for axonometric projections Part 1
Isometric projection
Nameplates - Dimensions Part 2 Circular nameplates
Nameplates - Dimensions Part 3 Triangular
nameplates
Conventional representation of common features
Nameplates - Dimensions Part 1 Square and
rectangular nameplates
Nameplates - Dimensions Part 4 Elliptical and
segmental nameplates
Folding of drawing prints
IS 11665
IS 11666
IS 11667
IS 11668
IS 11670
IS 12160
IS 12461 : Part 1
IS 12461 : Part 2
IS 13088
IS 13637 : Part 1
IS 13638 : Part 1
IS 13638 : Part 2
IS 14412
SP 46
IS 2186
IS 13847
IS 9701
IS 10311
IS 10312
IS 4218 : Part 3
IS 4695 : Part 1
IS 4696 : Part 1
IS 10517
IS 11094
IS 11683
Technical drawings - Title block
Technical drawings - Item lists
Technical drawing - Linear and angular tolerancing Indication on drawings
Technical drawings - Simplified representation of
centre holes
Technical drawings - Abbreviations and symbols for
use in technical drawing
Technical drawings - Fundamental tolerancing
principles
Simplified presentation of technical documents Part
1 Guide for preparation of supplementary drawings
Simplified presentation of technical documents Part
2 Guide for preparation of order drawing for bought
out parts
Technical drawings - Representation of splines and
serrations
Technical drawings - Rolling bearings Part 1
General simplified representations
Technical drawings - Seals for dynamic application
Part 1 General simplified representations
Technical drawings - Seals for dynamic application
Part 2 Detailed simplified representations
Technical Drawings - Indication for revision of
drawings
Engineering drawing practice for schools and
colleges
ISO Metric external screw threads interference fit
applications
Technical drawings - Tolerancing of orientation and
location - Projected tolerance zone
Brake performance of powered industrial trucks
General requirements of powered platform trucks
and their acceptance criteria
Safety code for powered tow trucks
ISO Metric screw threads Part 3 Basic dimensions
for design profiles
Knuckle screw threads Part 1 Thread profiles and
nominal dimensions
Dimensions for saw tooth threads Part 1 Basic and
design profiles
Acceptance criteria for forklift trucks
Strength performance requirements of service brake
components of powered industrial trucks
Methods of test for industrial tractors
IS 11757
IS 4696 : Part 3
IS 4696 : Part 4
IS 7008 : Part 2
IS 7684
IS 7685
IS 12726
IS 13302
IS 10587
IS 3872
IS 12157
IS 13971 : Part 1
IS 7726
IS 8788
IS 9965
IS 13971 : Part 2
IS 3873
IS 10453 : Part 2
IS 10480
IS 11698 : Part 3
IS 11698 : Part 4
IS 12186
IS 11717
IS 11723 : Part 1
IS 11724
General requirements and acceptance criteria for
forklift trucks with capacity from 10 000 kg to 50
000 kg
Dimensions for saw tooth threads Part 3 Basic
dimensions
Dimensions for saw tooth threads Part 4 Tolerancing
system
ISO Metric trapezoidal screw threads Part 2 Pitch
diameter combinations
Limits of sizes for ISO metric trapezoidal nut
threads (diameter range 8 to 100 mm)
Limits of sizes for ISO metric trapezoidal bolt
threads (diameter range 8 to 100 mm)
Order picking trucks - Stability and stability test
Rough terrain fork lift trucks - Stability test
Terminology for screw threads
Code of practice for lining of canals with burnt clay
tiles
Requirements for construction of work platform of
powered industrial trucks(for maintenance purposes)
Rough terrain fork lift trucks - Code of practice for
safety Part 1 Application, operation and maintenance
Limits of sizes for ISO metric trapezoidal nut
threads (diameter range 105 to 300 mm)
Dimensions for metric external taper and internal
parallel screw threads
Limits of sizes for ISO metric external screw threads
for high temperature applications
Rough terrain fork lift trucks - Code of practice for
safety Part 2 General requirements
Laying cement concrete/stone slab lining on canals Code of practice
Taper male stud tee body (stud run) for oil-hydraulic
couplings : Part 2 Made from bar stock
Stud run tee coupling assemblies for oil hydraulic
systems
ISO Miniature screw threads Part 3 Tolerances
ISO Miniature screw threads Part 4 Limits of sizes
Tolerances for ISO Metric trapezoidal screw threads
for lead and feed screw assemblies
Vocabulary on vibration and shock
Balance quality requirements of rigid rotors Part 1
Determination of permissible residual unbalance
Basis for specifying the rules in evaluating the
mechanical vibration of machines in the operation
range 10 to 200 rev/s
IS 13274
IS 13275
IS 11726
IS 11727
IS 13276 : Part 1
IS 13277
IS 13278
IS 13279
IS 13280
IS 13281
IS 14259
IS 14280
IS 2092
IS 2220
IS 2251
IS 2554
IS 2921
IS 2949
IS 2967
IS 3179
IS 3455
IS 3477
IS 3512
IS 4019
IS 4052
IS 3485
IS 3651 : Part 1
IS 3651 : Part 3
Mechanical vibration - Balancing - Vocabulary
Description and evaluation of field balancing
equipment
Requirements for instruments for measuring
vibration severity of rotating and reciprocating
machines
Measurement and evaluation of vibration severity in
situ of large rotating machines with speed range
from 10 to 200 rev/s
Evaluation of human exposure to whole-body
vibration - Part 1 General requirements
Balancing machine - Description and evaluation
Symbols for front panels of balancing machines
Criteria for evaluating flexible rotor balance_(to be
withdrawn)
Mechanical balancing of flexible rotors
Mechanical vibration and shock affecting man Vocabulary
Vibration and shock - Isolators - Procedures for
specifying characteristics
Mechanical vibration - Balancing - Shaft and fitment
key convention
Plunger type dial gauges first
Engineering metrology - Steel straightedges Specification
Plug and ring gauges for self holding tapers
Cast iron angle plates
Vernier height gauges
Engineering metrology - Plain V-blocks for
inspection purposes - Specification
External micrometer
Feeler gauges
Gauging practice for plain work pieces
GO and NO GO snap gauges for size range 3 to 250
mm
Tool maker's straightedges
Firm-joint dividers
Spring callipers
Plain and master setting ring gauges (size range
from 1 up to and including 315 mm)
Vernier calipers: Part 1 Vernier calipers with least
count 0.1 mm and 0.05 mm
Vernier callipers:Part 3 Vernier callipers with least
count 0.1 mm (measuring range above 1000 mm
upto and including 4000 mm)
IS 4083
IS 4189
IS 4210
IS 4213
IS 4241
IS 4290 : Part 2
IS 4290 : Part 3
IS 4349
IS 4440
IS 4492
IS 4563
IS 4960
IS 5273
IS 5388
IS 5812
IS 5939
IS 5943
IS 5979
IS 5980
IS 6150
IS 6231
IS 6137
IS 6232
IS 6246
IS 6311
IS 6952
IS 6973
IS 6987
IS 7018 : Part 1
IS 7018 : Part 2
IS 7018 : Part 3
Spring dividers
Firm-joint inside and outside callipers
Strip feeler gauges for electrical purposes
Engineering metrology - Vernier depth gagues upto
300 mm - Specification
Engineering metrology - Engineer's parallels Specification
Roughness comparison specimens:Part 2 Sparkeroded, shot-blasted and grit blasted, and polished
Roughness comparison specimens:Part 3 Cast
surfaces
Cylindrical setting masters
Engineering Metrology - Precision equipment - Slip
gange accessories_
Welded V-blocks (diameter range 300 to 2000 mm)
Block squares
Universal and elongated type V-blocks
Specification for radius gauges
Hexagonal handles for plain and threaded plug
gauges
Optical bevel protracters
Single angle sine tables
Compound angle sine tables
Sine centres
Bench centres
ISO metric screw thread measuring prisms
Prismatic angle gauges
Gauging members for plain plug gauges GO and NO
GO members (size range from 1 up to and including
40 mm)
Cast iron box angle plates
Gauging members for plain plug gauges GO and NO
GO members (size range above 120 up to 250 mm)
ISO metric screw thread measuring cylinders
Engineering metrology - Cylindrical squares Specification
Precision angle plates
Steel precision polygons
Technical supply conditions for gauges: Part 1
General
Technical supply conditions for gauges:Part 2
Assembly and identification of plain plug gauges
(size range from 1 mm up to and including 250 mm)
Technical supply conditions for gauges:Part 3
Assembly and identification of screw plug gauges
IS 7327
IS 7599 : Part 1
IS 7604
IS 7606
IS 7876
IS 8023
IS 8378
IS 8823
IS 9483
IS 9529
IS 9608
IS 9631
IS 10275
IS 10649
IS 10685
IS 10707
IS 11103
IS 12257 : Part 2
IS 12257 : Part 3
for ISO metric screw threads (size range from M1 up
to and including M200)
Engineering metrology - Measuring equipment Granite surface plates - Specification
General requirements for engineer's comparators
with stands:Part 1 engineer's comparators
Length bar accessories
Plain adjustable snap gauges
Gauge allowances and manufacturing tolerances for
plain gauges for outside measurements for ISO fit
sizes (nominal size up to 500 mm)
Gauges - Single ended progressive type plate snap
gauges (up to 160 mm) - Specification
Vocabulary for basic and general terms in
dimensional metrology
Triangular straightedges
Measuring instruments - Micrometer heads Specification
Taper plug gauges and taper ring gauges to check
taper bore of gauge handles and taper shanks of
gauging members
Gauging members for GO and NO GO screw plug
gauges and screw check plug gauges for ISO metric
screw threads (size range above M40 up to and
including M120)
Gauging members for GO and NO GO screw plug
gauges and screw check plug gauges for ISO metric
screw threads (size range from M1 up to and
including M40)
Methods for assessment of circularity error from
polar graphs obtained by using stylus type form
measuring instrument
Ring gauges for drill chuck taper arbors of morse
taper and jacob taper type
Gauging members for GO and NO GO screw plug
gauges and screw check plug gauges for ISO metric
screw threads (size range above M120 up to and
including M200
Instruments for measurement of surface roughness
by profile methods
Cylindrical measuring pins (size range from 0.1 mm
up to and including 20 mm)
Pneumatic measurement:Part 2 Design features of
instruments working in high pressure range
Pneumatic measurement:Part 3 Parameters of
instruments working on high pressure
IS 12257 : Part 4
IS 12257 : Part 5
IS 14271
SP 19
IS 1056
IS 1057
IS 12937
IS 13907
IS 1058
IS 1059
IS 1160
IS 1269 : Part 1
IS 1269 : Part 2
IS 1432
IS 1433
IS 1434
IS 1435
IS 1436
IS 1437
IS 1438
IS 1439
IS 1702
IS 1854
IS 2341
IS 2489
IS 2747
IS 2801
IS 3032
IS 3033
IS 3515
Pneumatic measurement:Part 4 General information
and examples of application
Pneumatic measurement:Part 5 Glossary of terms
and definitions
Engineering metrology - Dial snap gauges Specification
Classification of quality of scraped surfaces
Commercial weights - Specification
Legal metrology - Commercial carat weights Specification
Engineering metrology - Methods of testing
straightness and perpendicularity
Height setting micrometers and rising blocks Specification
Legal metrology - Commercial capacity measures Specification
Legal metrology - Commercial length measures
(non-flexible) - Specification
Metric dispensing measures - Specification
Legal metrology - Material measure of length Part 1
: Woven metallic and glass fibre tape measures
Legal metrology - Matirial measures of length Part
2: Steel tape measre
General requirements for weighing instruments
Beam scales
Counter machines
Platform weighing machines - Specification
Weigh bridges - Specification
Automatic weighing machines
Crane weighing machines
Steelyards
Spring balances
Person-weighing machines
Large metric capacity calibrating measures (nontilting type)
Baby weighing machines
Performance requirements for taximeters
Accuracy requirements for bulk meters used in
petroleum trade
General requirements for testing the accuracy of
commercial measuring instruments used in
petroleum trade
Accuracy requirements for dispensing pump used in
petroleum trade
Tapes for use in measurement of oil quantities
IS 3047
IS 3960
IS 4070
IS 4670
IS 14439 : Part 1
IS 8505
IS 8533
IS 8648
IS 8905
IS 8907
IS 8908
IS 9090
IS 9091
IS 9248
IS 9315
IS 9317
IS 9331
IS 9802
IS 9847
IS 10023
IS 10220
IS 11042 : Part 1
IS 11042 : Part 2
IS 11072
IS 11073
IS 11074
IS 11138
IS 11144
IS 11207
IS 11616
IS 11854
IS 12259
IS 10490
IS 10491
IS 10994 : Part 1
IS 10994 : Part 2
IS 10994 : Part 3
IS 10994 : Part 4
Accuracy requirements for volumetric container
filling machines used in petroleum trade
Totalizing weighing machines
Wheel weighers
Legal metrology - Liquor measures - Specification
Legal metrology - Gas volume meters Part 1 General
provisions
Mountaineering - Glossary of terms
General purpose carabiners for mountaineering
Ice axe for mountaineering purpose
Rock pitons for mountaineering
Ice piton for mountaineering
Snow stakes for mountaineering
Tent poles for mountaineering
Descenders for mountaineering
Piton hammers for mountaineering
Dimensions for boot/binding interface (Greater than
size 36) for alpine skis
Glossary of terms, definitions and measuring
conditions for alpine skis
Laboratory methods for determination of elastic
properties for alpine skis
Adjustable crampons for mountaineering
Ice hammer for mountaineering
Dimensions for ascenders for mountaineering
Descenders (type letter "E") for mountaineering
Binding screws for alpine skis Part 1 General
requirements
Binding screws for alpine skis Part 2 Test methods
Ice daggers for mountaineering
Expansion bolts for mountaineering
Rope ladders for mountaineering
Snow dead boy and dead man for mountaineering
Method for determination of deformation load and
breaking load of alpine skis
Helmets for mountaineering
Avalanche rods for mountaineering
Crampons mountaineering - Non-adjustable
Safety requirements for ski poles
Breech loading shot guns, single and double barrel
Muzzle loading shot guns, single and double barrel
Cartridges for shot guns Part 1 General requirements
Cartridges for shot guns Part 2 Blank cartridges
Cartridges for shot guns Part 3 Case empty
Cartridges for shot guns Part 4 Cap filled
IS 10994 : Part 5
IS 10994 : Part 6
IS 10994 : Part 7
IS 10994 : Part 8
IS 10994 : Part 9
IS 12497 : Part 1
IS 12497 : Part 3
IS 12497 : Part 4
IS 13136
IS 14391
IS 14422
IS 12497 : Part 5
IS 13540 : Part 1
IS 13541 : Part 1
IS 530
IS 1370
IS 1691
IS 1891 : Part 2
IS 1891 : Part 3
IS 1891 : Part 4
IS 1891 : Part 5
IS 2122 : Part 1
IS 2122 : Part 2
IS 2241
IS 2494 : Part 2
Cartridges for shot guns Part 5 Anvil
Cartridges for shot guns Part 6 Propellant
Cartridges for shot guns Part 7 Discs
Cartridges for shot guns Part 8 Air cushion
Cartridges for shot guns Part 9 Lead shots
Plastic cartridges for shot guns Part 1 General
requirements
Plastic cartridges for shot guns Part 3 Plastic body
tube
Plastic cartridges for shot guns Part 4 Plastic base
wad
Arms and ammunition - Rifle - Air rifle spring
loaded
Gas operated rifle (for shooting pellets) Specification
Arms and amunition - Rifle - 5.5mm (.22)
Plastic cartridges for shot guns Part 5 Plastic power
piston
Arms and ammunition - 4.5 mm (.177) air rifle and
air pistol pellets Part 1 General purpose
Arms and ammunition - 5.5 mm (.22) air rifle and
air pistol pellets Part 1 General purpose
Solid-woven impregnated hair belting for power
transmission
Transmission belting - Friction surface rubber
belting - Specification
Cast iron and mild steel flat pulleys
Conveyor and elevator textile belting - Specification
: Part 2 Heat resistant belting
Conveyor and elevator textile belting:Part 3 Oil
resistant belting
Conveyor and elevator textile belting:Part 4
Hygienic belting
Conveyor and elevator textile belting Specification:Part 5 Fire resistant belting for surface
application
Code of practice for selection, storage, installation
and maintenance of belting for power
transmission:Part 1 Flat belt drives
Power transmission - Belts - Code of practice for
selection, storage, installation and maintenance of
belting for power transmission:Part 2 V-belt drive
Round leather belting for small machines
V-belts - Endless V-belts for industrial purposes:Part
2 Fire resistant and antistatic V-belts - Specification
IS 5593
IS 6580
IS 6583
IS 3142
IS 3181
IS 6687
IS 7923
IS 8777
IS 9405
IS 9515
IS 9804
IS 10022
IS 10213
IS 10229
IS 10288
IS 11038
IS 11842
IS 12091
IS 12854
IS 13775 : Part 1
S 1072
IS 2031
IS 2291
IS 2292
IS 2693
IS 14206 : Part 1
IS 2327
IS 2610
Belt fasteners alligator type
Train lighting belt fasteners
Power transmission belts - Train lighting belting Specification
Pulleys - V-grooved pulleys for V-belts - groove
sections, Z, A, B, C, D and E and endless wedge belt
sections SPZ, SPA, SPB, and SPC
Conveyor belts - Fire resistant conveyor belting for
underground mines and such other hazardous
applications - Specification
Code of practice for selection, storage, installation
and maintenance of conveyor belting
Glossary of terms and definitions relating to drives
using V-belts and grooved pulleys
Endless variable-speed V-belts and groove sections
of corresponding pulleys for agricultural machinery
Method of test for mechanical belt fasteners
Link V-belts
Synchronous belt drive belts
Open ended cogged V-belting
Sandwich belting
Open end V-belts
Belt fasteners, plate type
Endless hexagonal belts for agricultural machinery
and groove sections of corresponding pulleys
PVC/Plastic hygienic belting
Belt fasteners, hook type
Power transmission - Belts,endless flat (used in lenix
drive system) - Specification
Conveyor belting - Solid woven cotton/synthetic
impregnated and unimpregnated - Specification:Part
1 Aeroslide belting for air gravity conveyor
Leaf chains, clevises and sheaves
Driving and driven machines - Shaft heights
Tangential keys and keyways
Taper keys and keyways
Power transmission - Bush type flexible couplings
On-site non-mechanical jointing of plied textile
reinforced_rubber conveyor belting: Part 1 Hot
vulcanizing - Code of practice
Straight sided splines for cylindrical shafts with
internal centering - Dimensions, tolerances and
verification
Power transmission - Straight sided splines for
machine tools - Dimensions
IS 2637
IS 3542
IS 3560
IS 3653
IS 3654
IS 3665
IS 3688
IS 4600
IS 6166
IS 6167
IS 6196
IS 6276
IS 10686
IS 11740
IS 12405
IS 13926
IS 13927
IS 3980
IS 4757
IS 4774 : Part 1
IS 14285
IS 4774 : Part 2
IS 9764 : Part 1
IS 9764 : Part 2
IS 10203
IS 10260 : Part 1
IS 10260 : Part 2
IS 10260 : Part 3
IS 11145
IS 14478
Steel roller chains Type S and C, Attachments and
chain wheels
Extended pitch transmission precision roller chains
and chain wheels
Short pitch transmission precision bush chains and
chain wheels
Dimensions for forged end type rigid couplings
Dimensions for straight sided serrations
Dimensions for involute sided splines
Power transmission - Shafts - Dimensions for
cylindrical and 1/10 conical shaft ends
Flexible shafts
Thin taper keys and keyways
Thin parallel keys and keyways
Dimensions for fitted half-couplings
Flexible shafts used in concrete vibrators
Mechanical multi-disc clutches (wet type)
Chains for motorcycles
Gear type flexible couplings
Welded steel type cranked link drag chains and
chain wheels
Welded steel type cranked link mill chains and chain
wheels
Porous metal powder oil impregnated bearings
Wrapped bushes
Thin walled half bearing Part 1 Plain bearing
Transmission devices - Flexible coupling - Tyre type
- Specification
Thin walled half bearing Part 2 Flanged bearings
Plain bearings - Washers for plain bearings and
wrapped bushes - Specification Part 1 Ring type
thrust washers
Plain bearings - Washers for plain bearings and
wrapped -Specification Part 2 Half thrust washers
Technical supply conditions for thin walled plain
bearings
Terms, definitions and classification of plain
bearings Part 1 Construction
Terms, definitions and classification of plain
bearings Part 2 Friction and wear
Terms, definitions and classification of plain
bearings Part 3 Lubrication
Peripheral length checking of thin walled half
bearings
Thick walled bushes plain and flanged type full
IS 2399
IS 2898
IS 3090
IS 3823
IS 3824 : Part 1
IS 3824 : Part 2
IS 4025
IS 4215
IS 4217
IS 4773
IS 3824 : Part 3
IS 3824 : Part 4
IS 5669
IS 5692
IS 5933
IS 5934
IS 5935
IS 6453
IS 6454
IS 6455
IS 6456
IS 6458
IS 6548
IS 6731
IS 7460
IS 7461 : Part 1
IS 7461 : Part 2
IS 8656
IS 8657
IS 9202
IS 11027
IS 7461 : Part 3
round without any joint or slit type
Rolling bearings - Vocabulary
Steel balls for rolling bearings
Code of practice for installation and maintenance of
rolling bearings
Rolling bearings - Static load ratings
Methods of evaluating dynamic load ratings of
rolling bearings Part 1 Radial ball bearings
Methods of evaluating dynamic load ratings of
rolling bearings Part 2 Radial roller bearings
Gauging practice for rolling bearings
Needle bearings
Needle rollers
Plummer blocks for rolling bearings
Methods of evaluating dynamic load ratings of
rolling bearings Part 3 Thrust ball bearings
Methods of evaluating dynamic load ratings of
rolling bearings Part 4 Thrust roller bearings
General plan of boundary dimensions for radial
rolling bearings_(ISO Title: Rolling bearing - Radial
bearing - Boundary dimensions - General Plan)
Tolerances for radial rolling bearings
Rolling bearings - Thrust ball bearings - Tolerances
Rolling bearing - Chamfer dimensions - Maximum
values - Specification
Radial internal clearances in unloaded radial rolling
bearings
Technical supply conditions for rolling bearings
Self aligning roller bearings
Single row radial ball bearings
Double row radial ball bearings
Double row cylindrical roller bearings
Rolling bearings - Instrument precision bearings
Locknuts, narrow series and lockwashers with
straight inner tab for rolling bearings
Tolerances for tapered roller bearings
General plan of boundary dimensions for tapered
roller bearings Part 1 Single row bearings
General plan of boundary dimensions for tapered
roller bearings Part 2 Double row bearings
Tapered adaptor sleeves for rolling bearings
Tapered withdrawal sleeves for rolling bearings
Cylindrical rollers
Definitions of tolerances for rolling bearings
General plan of boundary dimensions for tapered
IS 9619
IS 10648
IS 11904
IS 12102
IS 13405
IS 13406
IS 13962
IS 14347
IS 2458
IS 2458 : Part 2
IS 2467
IS 2535
IS 3734
IS 3756
IS 4071
IS 5037
IS 5267
IS 5375
IS 6535
IS 7443
IS 7504
IS 7403
IS 8830
IS 8843
IS 10185
IS 10911
IS 11863
IS 12328 : Part 1
IS 12328 : Part 2
IS 12328 : Part 3
IS 549
IS 723
IS 724
roller bearings Part 3 Flanged cups
Identification code for shell type needle bearings
(including sealed bearings)
Code for identification of ring type needle bearings
(including sealed bearings)
Rolling bearings - Radial bearings snap ring Dimensions and tolerances - Specification
Tapered roller bearings
Rolling bearings - Cylindrical rollers bearings,
sepasati thrust collars - Boundary dimensions
Radial ball bearings with flanged outer ring - Flange
dimensions
Rolling bearings - Metric tapered roller bearings Designation system
Plummer block housing - Specification
Glossary of terms for toothed gearing
Glossary of terms for toothed gearing:Part 2 Bevel
and hypoid gears
Notation for toothed gearing
Basic rack and modules of cylindrical gears for
general engineering and heavy engineering
Dimensions for worm gearing
Method for gear correction
Master gears
Basic rack and modules of straight bevel gears
Glossary of terms for worm gears
Data for procurement of cylindrical gears
Data for procurement of cylindrical bevel gears
Methods for load rating of worm gears
Gears - Cylindrical Gears - Accuracies - Methods of
inspection
Code of practice for selection of standard worm and
helical gear boxes
Basic requirements for marine gears
Accuracy requirements for turbine gears
Data for procurement of worm and worm wheels
Methods of inspection for straight bevel gears
Tolerances for worm gears
Bevel gear systems Part 1 Straight bevel gears
Bevel gears systems Part 2 Spiral bevel gears
Bevel gears systems Part 3 Zerol bevel gears
Split pins
Steel countersunk head wire nails
Mild steel and brass cup, ruler and square hooks and
screw eyes
IS 725
IS 730
IS 866
IS 1120
IS 1363 : Part 1
IS 1363 : Part 2
IS 1364 : Part 2
IS 1364 : Part 5
IS 1366
IS 1821
IS 1862
IS 1367 : Part 7
IS 1367 : Part 9 :
Sec 1
IS 1367 : Part 9 :
Sec 2
IS 1367 : Part 10
IS 1367 : Part 13
IS 1367 : Part 17
IS 1367 : Part 19
IS 1368
IS 1369 : Part 2
Copper wire nails
Hook bolts for corrugated sheet roofing
Tinmen's rivets
Coach screws
Hexagon head bolts, screws and nuts of product
grade C Part 1 Hexagon head bolts (size range M5 to
M64)
Hexagon head bolts, screws and nuts of product
grade C Part 2 Hexagon head screws (size range M5
to M64)
Hexagon head bolts, screws and nuts of product
grades A and B Part 2 Hexagon head screws (size
range M1.6 to M64)
Hexagon head bolts, screws and nuts of product
grades A and B Part 5 Hexagon thin nuts
(unchamfered) (size range M1.6 to M10)
Slotted cheese head screws
Dimensions for clearance holes for bolts and screws
Studs
Technical supply conditions for threaded steel
fasteners Part 7 Mechanical properties and test
methods for nuts without specified proof loads
Technical supply conditions for threaded steel
fasteners Part 9 Surface ISO 6157-1:1988
discontinuities : Section 1 Bolts, screws and studs
for general applications
Technical supply conditions for threaded steel
fasteners Part 9 Surface ISO 6157-3:1988
discontinuities : Section 2 Bolts, screws and studs
for special applications
Technical supply conditions for threaded steel
fasteners Part 10 Surface discontinuities on nuts
Technical supply conditions for threaded steel
fasteners Part 13 Hot-dip galvanized coatings on
threaded fasteners
Industrial fastners - Threadeed steeel fasteners Technical supply conditions Part 17 Inspection,
smapling and acceptance procdure.
Industrial fasteners - Threaded steel fasteners Technical supply conditions Part 19 Axial fatigue
testing of bolts, screws and studs.
Dimensions for ends of parts with external ISO
metric threads
Fasteners - Thread runout and undercuts Part 2
Dimensions for screw thread undercuts for external
ISO metric threads
IS 1928
IS 2016
IS 2155
IS 2232
IS 2269
IS 2388
IS 2393
IS 2585
IS 2609
IS 2638
IS 2687
IS 2907
IS 2998
IS 3063
IS 3138
IS 3460
IS 3468
IS 3524 : Part 1
IS 3524 : Part 2
IS 3640
IS 3726
IS 3727
IS 3974
IS 4040
IS 4172
IS 4206
IS 4762
IS 5368
IS 5370
IS 5371
IS 5372
IS 5373
IS 5374
IS 5554
IS 5624
IS 6094
IS 6101
IS 6113
Boiler rivets (12 to 48 mm diameter)
Plain washers
Cold forged solid steel rivets for hot closing (6 to 16
mm diameter)
Slotted and castle nuts
Hexagon socket head cap screws
Slotted grub screws
Cylindrical pins
Black square bolts and nuts (dia range 6 to 39 mm)
and black square screws (dia range 6 to 24 mm)
Coach bolts
Flat split cotters
Cap nuts - Specification
Non-ferrous rivets (1.6 to 10 mm)
Cold forged steel rivets for cold closing (1 to 16 mm
diameter)
Fasteners - Single coil rectangular section spring
lock washers - Specification
Hexagonal bolts and nuts (M42 to M150)
Knurled nuts - Specification
Pipe nuts - Specification
Threaded taper pins Part 1 with internal threads
Threaded taper pins Part 2 with external threads
Hexagon fit bolts
Thumb screws
Wing screws
Bifurcated rivets for general purposes
Solid-drilled tubular and semi-tubular rivets
Dimensions for radii under the head of bolts and
screws
Dimensions for nominal lengths and thread lengths
for bolts, screws and studs
Worm drive hose clamps for general purposes
Thin slotted and castle nuts (dia range 6 to 52 mm)
Plain washers with outside diameter more than three
times the inside diameter.
Multi tooth lock washers
Taper washers for channels (ISMC)
Square washers for wood fastenings
Taper washers for I-beams (ISMB)
Lock washers with lug - Specification
Foundation bolts - Specification
Hexagon socket set screws
Slotted pan head screws
Aluminium fasteners for building purposes
IS 6610
IS 6623
IS 6639
IS 6649
IS 6688
IS 6730
IS 6732
IS 6733
IS 6734
IS 6735
IS 6736
IS 6738
IS 6739
IS 6755
IS 6761
IS 6821
IS 6862
IS 6863
IS 7169
IS 7170
IS 7173
IS 7178
IS 7368
IS 7383
IS 7384
IS 7386
IS 7478
IS 7479
IS 7483
IS 7485
IS 7486
IS 7519
IS 7790
IS 7795
IS 7800
IS 8033
Heavy washers for steel structures
High strength structural nuts
Hexagonal bolts for steel structures
Hardened and tempered washers for high strength
structural bolts and nuts
Taper pins
Felt nails
Double point nails
Wall and roofing nails
Cut lath and lath nails
Fasteners - Spring lock washers for screws with
cylindrical heads - Specification
Slotted raised countersunk head wood screws
Panel pins and lost head nails
Slotted round head wood screws
Double coil helical spring washers
Countersunk head screws with hexagon socket
Methods for sampling non-threaded fasteners
Clevis pins
Clevis pins with head
Slotted raised countersunk (oval) head tapping
screws (common head style)
Slotted countersunk (flat) head tapping screws
(common head type)
Slotted pan head tapping screws
Tapping screws - Technical supply conditions
Grooved pins - Full length taper grooved specification
Grooved pins - Third length centre grooved Specification
Grooved pins - Full length parallel grooved, with
pilot - Specification
Grooved pins - Half length reverse taper grooved Specification
Dimensions for cross recesses
Recess penetration gauges
Cross recessed pan head screws
Cross recessed countersunk head screws
Cross recessed raised countersunk head screws
Hammer drive screws
Domed cap nuts - Specification
Hexagon nuts with collar
Thread cutting tapping screw - Screw threads and
ends - Dimensions
Round washers with square hole for wood fastenings
IS 8068
IS 8070
IS 8217
IS 8351
IS 8352
IS 8353
IS 8379
IS 8412
IS 8535
IS 8536
IS 8721
IS 8722
IS 8822
IS 8856
IS 8869
IS 8911
IS 9549
IS 10102
IS 10238
IS 10248
IS 11362
IS 12427
IS 12952
IS 12982
IS 13722
IS 13724
IS 13725
IS 13726
IS 14394
SP 29 : Part 1
SP 29 : Part 3
IS 1797
Tab washers
Screws - Slotted capstan (tommy bolts) Specification
Dimensions for pipe thread runouts and undercuts
Spiral pins (heavy duty type)
Flat countersunk square neck bolts
Flat countersunk nib bolts
Spiral pins (medium duty type)
Slotted countersunk head bolts for steel structures
Bolts, screws, nuts and accessories - Terminology
and nomenclature
Fasteners - Bolts, screws, studs and nuts - Symbols
and designation of dimensions
Fish bolts (cup oval neck bolts) for collieries
Fish bolt with square head for collieries
Slotted mushroom head roofing bolts
Hexagon weld nuts - Specification
Washers for corrugated sheet roofing
Slotted raised countersunk head screws
Dimensions for split pin holes, wire holes and head
slots for bolts
Technical supply conditions for rivets
Step bolts for steel structurers
Cylindrical pins with internal thread
Head configuration and gauging of countersunk
head screws
Transmission tower bolts
Grooved pins - Full length parallel grooved with
chamfer - Specification
Pins and grooved pins - Shear test
Hexagon nuts, style 1, with metric fine pitch thread Product grades A and B
Hexagon thin nuts with metric fine pitch thread Product grades A and B
Hexagon head screws with metric fine pitch thread Product grades A and B
Hexagon head bolts with metric fine pitch thread Product Grades A & B
Industrial fasteners - Hxagon nuts of product grade
C - Hot-dip galvnized - Spcification (size range M
12 to M 36)
Handbook on Industrial Fasteners Part 1
Handbook on Industrial Fasteners Part 3
Methods of test for spices and condiments (IS
1797:1985 is also technically equivalent with ISO
IS 1798
IS 1877
IS 1907
IS 1908
IS 1909
IS 2322
IS 2447
IS 4009 : Part 1
IS 4009 : Part 3
IS 4561 : Part 1
IS 4561 : Part 2
IS 4561 : Part 3
IS 3576
IS 3795
IS 3796
IS 3797
IS 4403
IS 4404
IS 4811
IS 5452
IS 4561 : Part 4
IS 4561 : Part 5
IS 4672
IS 4673
IS 5548
IS 5559
IS 5664
IS 7089
IS 7744
IS 7745
IS 7794
IS 8417
IS 9772
IS 11617
IS 8593 : Part 1
IS 8593 : Part 2
IS 8593 : Part 3
928:1980, 929:1980, 930:1980, 939:1980, 941:1980
in addition to ISO 927)
Black pepper, whole and ground
Terminology for spices and condiments
Cardamom (capsules and seeds)
Ginger, whole and ground
Indian curry powder
Chillies, whole and ground(powdered)
Cumin, whole
Grease nipples Part 1 Button head grease nipples
Grease nipples Part 3 - Cup type - Specification
Oil cans Part 1 Light duty oil cans
Oil cans Part 2 Conical oil cans
Oil cans Part 3 Feeding oil cans
Turmeric, whole and ground
Fenugreek, whole and ground
Fennel seeds, whole
Celery seeds
Ajowan
Cloves, whole and ground
Cinnamon, whole
Dehydrated garlic
Oil cans Part 4 Detachable spout oil cans
Oil cans Part 5 Lever type oil cans
Grease cups
Wick feed lubricators
Lubricating nipple adaptors
Oilers
Lubricating connectors
Limited supply plugs
Dimensions for drip-feed lubricators
Dimensions of lubrication holes, grooves and bore
relief
Manual portable grease guns
Glossary of lubrication terms
Air operated high pressure grease pumps
Regulating type liquid flow indicators
Recommendations for centralized lubrication as
applied to plant and machinery Part 1 Oil lubrication
Recommendations for centralized lubrication as
applied to plant and machinery Part 2 Grease
lubrication
Recommendations for centralized lubrication as
applied to plant and machinery Part 3 Aerosol
lubrication
IS 11618
IS 12139
IS 14279
IS 14298
IS 7001
IS 7864 : Part 1
IS 7864 : Part 2
IS 7906 : Part 3
IS 7906 : Part 4
IS 7906 : Part 5
IS 7906 : Part 7
IS 8924
IS 9484
IS 9574
IS 9801
IS 7906 : Part 8
IS 7907 : Part 1
IS 7907 : Part 2
IS 7907 : Part 3
IS 7907 : Part 4
IS 10876
IS 10878 : Part 1
IS 10878 : Part 2
IS 12511 : Part 1
IS 12511 : Part 2
Non-regulating type liquid flow indicators
Code for lubrication symbols
Lubrication Equipment - Barrel transfer pumps for
grease - Specification
Lubrication Equipment - Barrel transfer pumps for
oil - Specification
Shot peening of steel parts - Specification
Upholstery springs:Part 1 Conical type
Upholstery springs:Part 2 Zig zag type
Helical compression springs:Part 3 Data sheet for
springs made from circular section wire and bar
Helical compression springs:Part 4 Selection of
standard cold coiled springs made from circular
section wire and bar
Helical compression springs:Part 5 Hot coiled
springs made from circular section bars Specification
Helical compression springs:Part 7 Quality
requirements for cylindrical coil compression
springs used mainly as vehicle suspension springs
Bushes for leaf spring assemblies for automotive
suspension
Centre bolts for leaf springs
Leaf springs assembly - Clips - Specification
Laminated springs for railway rolling stock
Helical compression springs:Part 8 Method of
inspection of hot coiled compression springs made
from circular section bars
Helical extension springs:Part 1 Design and
calculation for springs made from circular section
wire and bar
Helical extension springs:Part 2 Cold coiled springs
made from circular section wire and bar
Helical extension springs:Part 3 Data sheet for
springs made from circular section wire and bar
Helical extension springs:Part 4 Selection of
standard cold coiled springs made from circular
section wire and bar
Buckles for laminated springs for railway rolling
stock
Flat form springs:Part 1 Design and calculation for
springs made from rectangular cold rolled strips
Flat form springs:Part 2 Specification for springs
made from rectangular cold-rolled strips
Disc spring:Part 1 Design calculation
Disc spring:Part 2 Specification
IS 1294
IS 1295
IS 1296
IS 1297
IS 1610
IS 2181
IS 3291
IS 3299
IS 3290
IS 3375
IS 3816
IS 3817
IS 3868
IS 4181
IS 4188
IS 4338
IS 4339
IS 4340
IS 4341
IS 4342
IS 4632
IS 5740
IS 6903
IS 7492
Bobbins for sewing machines for household
purposes
Household sewing machines - Needle bar Specification_
Household sewing machines - Needle bar Specification
Household sewing machines - Presser bar Specification
Household sewing machines - General requirements
Household sewing machine needles
Thread take up cams for sewing machines for
household purposes
Oscillating-rock shafts for sewing machines for
household purposes
Household sewing machines - Thread take-up lever
sub-assembly for cam type sewing machines Specification
Household sewing machines - Bobbin case Specification_
Connecting rods for sewing machines for household
purposes
Household sewing machines - Arm shaft Specification
Feed lifting rock shaft for sewing machines for
household purposes
Feed fork for sewing machines for household
purposes
Household sewing machines - Oscillating shafts Specification
Household sewing machines - Vertical oscillating
shuttle - Specification
Needle bar link studs for sewing machines for
household purposes
Needle bar links for sewing machines for household
purposes
Feed holder roller for sewing machines for
household purposes
Square slider for oscillating rock shaft for sewing
machines for household purposes
Square slider for stitch regulator shaft for sewing
machines for household purposes
Household Sewing Machines - Memorandum on
screw threads for sewing machine components
Glossary of terms relating to sewing machines for
household purposes
Sewing machines, household - Sewing requirements
IS 7493
IS 8892
IS 9874
IS 10040
IS 9152
IS 9697
IS 10304
IS 10305
IS 10306
IS 11280
IS 11345
IS 11347
IS 12058
IS 12109
IS 12740
IS 12789
IS 12798
IS 13120
IS 13192
IS 13806
IS 13825
IS 13872
IS 13972
IS 14477
Sewing machines, household - Durability
requirements
Bobbins for sewing machines with rotating hooks
for industrial use
Arm and bed assembly for sewing machines for
household purposes
Rotating hooks for sewing machines for industrial
use
Glossary of terms and identification symbols
relating to classification of industrial sewing
machines
Bobbin cases for sewing machines with rotating
hooks for industrial use
Feed rock shaft for sewing machines for household
purposes
Feed rock shaft crank for sewing machine for
household purposes
Feed lifting rock shaft for sewing machines for
household purposes
House hold sewing machines - Feed bar Specification
Oscillating shaft crank for sewing machines for
household purposes
Household sewing machines - Shutter driver Specification
Slide plates for sewing machines for household
purposes
General requirements for light duty sewing machine
heads for industrial use
Household sewing machines - Stand - Specification
Household sewing machines - Tables and base
Household sewing machines - Fly wheels Specification
Household sewing machines - Flywheel bush Specification
Household sewing machines - Hand attachment
assembly
Household sewing machine - Closed type shuttle
race assembly - Specification
Household sewing machines - Arm shaft front bush Specification
Household sewing machines - Stitch regulator Specification
Household sewing machines - Bobbin winder
assembly - Specification
Industrial sewing machines (Light duty) - Stand -
IS 2712
IS 14207
IS 4688
IS 5125
IS 5129 : Part 2
IS 5566
IS 5569
IS 6210
IS 7714
IS 7719
IS 9066
IS 9975 : Part 4
IS 10008
IS 10330
IS 10864
IS 14538 : Part 2
IS 14539
IS 988
IS 1360
IS 1399
IS 1400
IS 1444
IS 1480
IS 1481
IS 1492
IS 1561
IS 1562
IS 1563
IS 1632
IS 1764
IS 1779
IS 1842
IS 1955
IS 1957
IS 2233
Specification
Compressed asbestos fibre jointings
Household sewing machines - Open type shuttle race
sub-assembly - Specification
Proofed cotton duck, gland packing
Method of tests and performance rating for rotary
shaft radial lip type seal units
Rotary shaft radial lip type oil seal units Part 2
Terminology and recommendations for storage,
handling and installation
Vegetable fibre base jointing material
Cork and collulose base jointing material
Method of test for stress relaxation of gasket
materials (to be withdrawn)
Method of seability test for gasket material
Metallic spiral wound gaskets
Specification for lubricated cotton gland packings
`O' Rings Part 4 Terminology and definition of
terms
Beater addition jointings - Specification
Formed asbestos packing rings of high pressure and
high temperature
Recommendation for heat exchanger gasket
Gaskets and packings - Compositions cork - Test
methods
Insulation mill board - Specification
General requirements for optical components
Engineers' pattern tee squares
Glossary of terms used in optical technology
Optical glass
Engineers' pattern drawing boards
Metric scales for general purposes
Metric steel scales for engineers
Metric surveying chains
Set squares for use of drawing offices
Metric diagonal scales (cartographers, surveyors and
engineers)
Protractors for use of drawing offices
Optical instruments - Bubbles - Specification
Trough compass
4-Metric, levelling staff, folding type
Surveying chain pins (arrows)
Prismatic compasses, liquid
Prismatic compasses, non-liquid
Straightedges for drawing offices use
IS 2286
IS 2287
IS 2288
IS 2539
IS 2666
IS 2754
IS 2976
IS 2988
IS 3081
IS 3099
IS 3113
IS 3135
IS 3207
IS 3208
IS 3209
IS 3210
IS 3211
IS 3212
IS 3213
IS 3214
IS 3215
IS 3216
IS 3217
IS 3218
IS 3219
IS 3220
IS 3221
IS 3222 : Part 1
IS 3686
IS 4328
IS 4329
IS 4380
Pantograph
Drafting machines
Ranging rods
Plane tables
Slide rules (linear type)
General requirements for optical instruments
Optical theodolite
Vernier theodlite - Specification
Microscopes - General purposes - Dimensions and
marking
Microscopes - Slips and slides - Specification: Part 1
Microscope slips; Part 2 Microscope slides
Prismatic binoculars for common use
Cathetometer
Engineers' drawing instruments, rotating compasses
Engineers' drawing instruments, half set of
compasses
Engineers' drawing instruments, spring bow
compasses
Engineers' drawing instruments, drawing pens
Engineers' drawing instruments, pen points Specification
Engineers' drawings instruments, lengthening bars Specification
Engineers' drawing instruments, handles Specification
Engineers' drawing instruments, pencil points Specification
Engineers' drawing instruments, needle points Specification
Engineers' drawing instruments, needles Specification
Engineers' drawing instruments, prickers Specification
Paralleld rulers, 150 mm (link type)
Engineers' drawing instruments, boxes for reads and
needles
Engineers' drawing instruments, screw drivers
Set for drawing instruments
Instruments screws: Part 1 Fasteners for drawing
instruments_
Student type microscope
Monocular dissecting microscope
Measuring (travelling) microscope
Abneyd level
IS 4590
IS 5146
IS 5148
IS 5153
IS 5205
IS 5415
IS 5706
IS 5726
IS 5737
IS 5928
IS 6425
IS 6471
IS 7009
IS 7010
IS 7011
IS 7047
IS 7265
IS 7543
IS 7544
IS 7545
IS 7919
IS 8248
IS 8275
IS 8311
IS 8330
IS 8390
IS 8630
IS 8651
IS 8661
IS 8679
IS 8680
IS 8681
IS 8691
IS 9107
IS 9514
IS 9571
IS 9607
IS 9613
Secondary level
Sounding sextant
Hand magnifiers (circular) 50 mm, 75 mm and 100
mm
Proportional compasses - 150 mm, 200 mm and 300
mm
Drawing pins
Code of practice for packing and packaging of
optical and mathematical instrument and
components
Optical instruments - Spirit levels for use in
precision engineering - Specification
Engineers' drawing instruments, bordering pens
Engineers' drawing instruments, curve pens
Tangent clinometer
Dioptometer (lensometer)
spectrometer (student type)
Optical square (for surveying)
Pivots for compasses
Back-silvered mirrors used in instrument industry
Timbers used in instrument industry
Coating materials
Planimeters
Parallel ruler (roller type)
Optical bench (advanced type)
Refractometer-abbe type
Anti reflection coating on glass optical components
Binocular eyepieces for microscope
Instrument jewels
Tripod for surveying instruments
Arc combs
Engineers' drawing instrument, double line pens
Flame photometer
Polarimeter and saccharimeter (optical)
Triangular scales
Engineers' drawing instruments, compass bowl pen
double knee jointed with sector head joints
Engineers' drawing instruments, compass bow pencil
double knee jointed with sector head joints
Mirror stereoscope
Autocollimeter
Front surface aluminized mirrors
Photoelectric colorimeters (single beam)
Tertiary level
Primary level
IS 9680
IS 9892
IS 9898
IS 10679
IS 10695
IS 10236 : Part 1
IS 10236 : Part 2
IS 10236 : Part 3
IS 10236 : Part 4
IS 10236 : Part 5
IS 10236 : Part 6
IS 10236 : Part 7
IS 10236 : Part 8
IS 10236 : Part 9
IS 10236 : Part
10
IS 10236 : Part
11
IS 10236 : Part
13
IS 11444
IS 11445
IS 11781
IS 11961
IS 10236 : Part
14
IS 10236 : Part
15
IS 10236 : Part
16
IS 12353
IS 12428
Materials for light duty springs for instrument
industry
Subtense bar
Helictrope surveying
Photoelectric spectrophotometer single beam type
Pocket stereoscope
Procedure for basic climatic and durability tests for
optical instruments: Part 1 General
Procedure for basic climatic and durability test for
optical instruments: Part 2 Dry heat test
Procedure for basic climatic and durability test for
optical instruments:Part 3 Cold test
Procedure for basic climatic and durability test for
optical instruments Part 4 Damp heat test
Procedure for basic climatic and durability test for
optical instruments:Part 5 Damp heat (cyclic) test
Procedure for basic climatic and durability test for
optical instruments:Part 6 Salt mist test
Procedure for basic climatic and durability test for
optical instruments:Part 7 Mould growth test
Procedure for basic climatic and durability test for
optical instruments:Part 8 Thermal shock (rapid
change of temperature) test
Procedure for basic climatic and durability test for
optical instruments:Part 9 Low air pressure (altitude)
test
Procedure for basic climatic and durability test for
optical instruments:Part 10 Bump test
Procedure for basic climatic and durability test for
optical instruments:Part 11 Vibration test
Procedure for basic climatic and durability test for
optical instruments:Part 13 Dust test
Grinding and polishing materials for optical
components
Parallax bar
Stencil templates and pen tips
4-metric levelling staff (telescopic)
Procedure for basic climatic and durability test for
optical instruments:Part 14 Driving rain test
Procedure for basic climatic and durability test for
optical instruments:Part 15 Drop test
Procedure for basic climatic and durability test for
optical instruments:Part 16 Solar radiation test
Stencil templates for geometrical figures
Scribing tools
IS 12713
IS 12874
IS 12888
IS 13011 : Part 1
IS 13011 : Part 2
IS 13011 : Part 3
IS 13108 : Part 1
IS 13117
IS 14258
IS 14260
IS 4849
IS 5225
IS 5235
IS 5793
IS 14440
IS 5798
IS 5799
IS 5901
IS 5912
IS 5924
IS 5945
IS 5946
IS 5947
IS 5948
IS 5973
IS 6806
IS 6871
IS 7243
IS 7244
IS 8336
IS 8693
Permissible cosmetic defects and inspection of
optical components
Telescopic alidade
Distance meter (IR)
Over head projectors:Part 1 Projection stages Dimensions
Over head projectors:Part 2 Projection stages Transparencies and transparencies frames
Over head projectors:Part 3 Projection stages - Film
rolls cores and ISO 7943-3:1987
windows Dimensions
Optics and optical instruments - Microscopes:Part 1
Immersion oil for ISO 8036-1:1986
general use
in light microscopy
Microscopes' connecting dimensions of tube slides
and tube slots
Raw optical glass - testing of the resistance to attack
by Aqueous Solutions at 25oC and classification
Glass and glass-ceramics - Knoop hardness test
Meteorology - Rain measures - Specification
Meteorology - Raingauge, non recording Specification
Raingauge, recording - Specification
Aneroid barometers
Drawing Instruments - Tubular tips for hand held
technical pens using India ink on tracing paper Specification
Mercury barometers
Windvane
Thermograph, bimetallic
Anemometer, cup counter
Clock mechanisms and drums for meteorological
instruments
Barograph, aneroid
Meteorology - Whirling psychrometer Specification
Charts for recording meteorological instruments
Thermometer screens
Pan evaporimeter - Specification
Snowgauge
Distant indicating wind equipment
Sunshine recorder
Thermometer for mercury barometer
Thermoelectric pyranometer
Net pyrradiometer
IS 8754
IS 9085
IS 10473
IS 11121
IS 11875
IS 11876
IS 12781
IS 13436
IS 13448
IS 13459
SP 61
IS 2533
IS 8622
IS 8916
IS 9441
IS 9865
IS 10995
IS 10996
IS 11152
IS 12397
IS 12398
IS 12399
IS 14253
IS 14633
IS 9243 : Part 1
IS 9243 : Part 2
IS 9243 : Part 3
IS 9261
IS 9263 : Part 1
IS 9263 : Part 2
IS 9275
IS 9641
IS 9642
IS 9672
Electrical anemograph
Correction slide for mercury barometers
Cloud search light
Pyranograph, bimetallic
Diffuse pyranometers
Airmeter
Marine buckets for sea surace temperature
measurements
Sensitive anemometer - Specification
Meteorology - Thermoelectric pyrheliemeter Specification
Angstrem pyrhcliometers - Specification
General guidelines for automatic weather stations
Geometry boxes
Wire wound sliding contact - rheostat
Spherometer
Sextant
Laboratory weights
Tuning fork
Stop clock with fly back action
Laboratory stands (metallic)
Metallic dissecting trays
Multi-purpose mercury barometer (for educational
use)
Tripod stands
Wire gauze for school and laboratory use Specification
Black-board for classrooms
Method of test for wrist watches Part 1
Antimagnetic
Method of test for wrist watches Part 2 Shock
resistant
Method of test for wrist watches Part 3 Water
resistant
Symbolization of control positions for time-keeping
instruments
Wrist watches - Horological jewels: Part 1
Functional and non-functional jewels (definition)
Wrist watches - Horological jewels: Part 2 Types
and dimensions
Requirements for radioluminescene for time-keeping
instruments
Dimensions for lugs for wrist watch case
Dimensions for case pipe for wrist watch case
Dimensions for movements for wrist watches
IS 9673
IS 9783
IS 10361
IS 10362
IS 10364
IS 10363
IS 10365
IS 10366
IS 10367
IS 10368
IS 10863
IS 10865
IS 11439
IS 11562
IS 11681
IS 12114 : Part 1
IS 12114 : Part 2
IS 12471
IS 12472
IS 12477
IS 12510
IS 12745 : Part 1
IS 14558
IS 14559
IS 9915
IS 9916
IS 13130 : Part 1
IS 13130 : Part 2
IS 13718 : Part 1
Crown for wrist watch case
Nomenclature of parts for wrist watches
Classification of wrist watch cases
Dimensions for threads for back cover and bezel for
watch cases
Dimensions for sanp type back cover and bezel for
watch cases
Dimensions for fixing devices for threaded back
covers for watch cases
Dimensions for packing ring and housing for back
cover joint for watch cases
Watch cases - crystal and dial opening diameters Dimensions
Dimensions for crystal and dial openings shaped or
circular for watch cases
Dimensions for movement holders for watch cases
One day alarm clocks
Wrist watches - Spring bars for watch cases and
strap - Specification
Watch hands fixing dimensions
O-rings for wrist watch crowns and push bottons
Technico commercial definitions of horology
vocabulary
Gold alloy coverings on watch cases and their
accessories Part 1 General requirements
Gold alloy coverings on watch cases and their
accessories Part 2 Determination olmfineness,
thickness and corrosion resistance
Hands for clocks
Connecting dimensions, fits and dimensions
combinations of hands for clocks
Bushing for hands for clocks
Wall clocks - Battery operated
Horological vocabulary - Technical and scientific
definitions Part 1 Technical and scientific definitions
Horology - Primary batteries - Watch batteries
Horology - Divers watches
Lens aperture markings, still cameras
Distance scale markings of photographic lenses
Wrist watches and watch movements Part 1
Mechanical watches
Wrist watches and watch movements Part 2
Electronic quarts
Horology - Watch straps Part 1 Leather straps Specification
IS 13718 : Part 2
IS 14338
IS 14339
IS 14365
IS 14560 : Part 1
IS 14560 : Part 2
IS 9948
IS 10547
IS 10567
IS 10750 : Part 1
IS 10784
IS 10835
IS 10917
IS 12568
IS 14620
IS 10906
IS 10912
IS 11164
IS 1260 : Part 1
IS 1260 : Part 2
IS 6963
IS 7028 : Part 1
IS 7028 : Part 2
Horology - Watch straps Part 2 Stainless steel Specification
Basic and design profile of screw threads for watch
bezel and back covers
Horology-Watch bezel and back cover ganges Technical supply conditions - General
Horology - Gauges for watch bezel and back covers
- Dimensions and Tolerances
Horology - Mineral shaper glass crystal for wrist
watch cases : Part 1 Dimension, material& test
procedure - Specification
Horology - Mineral & shaphure glass crystal for
wrist watch cases : Part 2 Gasket - Dimension,
material & test procedure - Specification
Shutter exposure-time markings. still cameras
Camera accessory shoes for photoflash lamps and
electronic photoflash units
Dimensions and designations of optical filter mounts
for photographic equipment
Shutter cable release, photographic:Part 1 Fitting
dimensions of tip and socket
Dimensions of small flash connections for hand-held
cameras
Tripod connections, photographic
Exposure meters (photoelectric type) for general
purposes
Methods for testing black and white photographic
enlargers
Photography - Determination of flash guide numbers
Photography - Camers using films 35 mm and 16
mm film - Picture sizes
Photography - Roll film cameras - Back window
location an picture sizes
Photography - Front lens barrels up to 127 mm
Dimensions important to the connection of
auxiliaries
Pictorial marking for handling and labelling of
goods: Part 1 Dangerous goods
Pictorial marking for handling and labelling of
goods: Part 2 General goods
Pictorial marking on packages containing
photographic materials sensitive to radiant energy
Performance test for complete, filled transport
packages: Part 1 Stack load test
Performance tests for complete, filled transport
packages: Part 2 Vibration test at fixed low
IS 7028 : Part 4
IS 7028 : Part 5
IS 7028 : Part 6
IS 7028 : Part 8
IS 7028 : Part 9
IS 8470
IS 14208
IS 8354
IS 8715
IS 7028 : Part 10
IS 7028 : Part 11
IS 7028 : Part 12
IS 7030
IS 7031
IS 9111
IS 9732
IS 9733 : Part 1
IS 9733 : Part 2
IS 7705
IS 8355
IS 8716
IS 8717
frequency
Performance tests for complete, filled transport
packages: Part 4 Vertical impact drop test
Performance tests for complete, filled transport
packages: Part 5 Rolling test
Performance tests for complete, filled transport
packages: Part 6 Compression test
Performance tests for complete, filled transport
packages: Part 8 Water spray test
Performance tests for complete, filled transport
packages: Part 9 Stacking test using compression
testing
Dimensions of rigid rectangular transport packages
Packaging - Unit load sizes - Dimensions
Code of practice for packaging of electric fans
Code of practice for the packaging of bicycles for
export
Performance tests for complete, filled transport
packages:Part 10 Water immersion test
Performance tests for complete, filled transport
packages: Part 11 Toppling test
Performance tests for complete, filled transport
packages: Part 12 Vibration tests using a sinusoidal
variable frequency
Identification of parts for complete, filled transport
packages when testing
Method of conditioning for testing of complete,
filled transport packages
Glossary of terms and classification pertaining to
transport packaging
Method for recording information for distribution
trails for complete filled transport packages
Guidelines for the compilation of performance tests
schedules of complete filled transport packages: Part
1 General principles
Guidelines for the compilation of performance tests
schedules of complete filled transport packages: Part
2 Quantitative data
Code of practice for packaging of precision and
special purpose steel tubes
Code of practice for packaging of sewing machine
for household purposes
Code of practice for the packaging of household
electrical appliances
Code of practice for the packaging of cast iron pipes
and fittings of 150mm dia and below
IS 10097
IS 10112
IS 10222
IS 11430
IS 10106 : Part 1
: Sec 1
IS 10106 : Part 1
: Sec 2
IS 10106 : Part 1
: Sec 3
IS 10106 : Part 1
: Sec 4
IS 10106 : Part 1
: Sec 5
IS 10106 : Part 1
: Sec 6
IS 10106 : Part 2
: Sec 1
IS 10106 : Part 2
: Sec 2
IS 10106 : Part 2
: Sec 3
IS 10106 : Part 2
: Sec 5
IS 10106 : Part 2
: Sec 6
IS 10106 : Part 3
: Sec 1
IS 10106 : Part 3
: Sec 2
IS 12452
IS 925
IS 992
IS 10106 : Part 3
: Sec 3
IS 10106 : Part 3
: Sec 4
IS 10106 : Part 3
: Sec 5
IS 10106 : Part 4
Code of practice for the packaging of metal cutting
tools
Code of practice for the packaging of bonded
abrasive products
Code of practice for the packaging of nails
Code of practice for the packaging of ball and roller
bearings
Packaging code: Part 1 Product packaging,Section 1
Foodstuffs and perishables
Packaging code: Part 1 Product packaging,Section 2
Tobacco and tobacco products
Packaging code: Part 1 Product packaging,Section 3
Textiles, fabrics and allied products
Packaging code:Part 1 Product packaging,section 4
Package cushioning design
Packaging Code: Part 1 Product packaging,Section 5
Marking, addressing and identification
Packaging code: Part 1 Product packaging,Section 6
Protection against spoilage of packages and their
contents by Micro-organisms, Insects, Mites and
Rodents
Packaging code: Part 2 Packaging materials,Section
1 Metals
Packaging code: Part 2 Packaging materials Section
2 Paper and paper board
Packaging code: Part 2 Packaging materials Section
3 Plastics materials
Packaging code: Part 2 Packing materials Section 5
Wood and plywood
Packaging code:Part 2 Packaging materials Section
6 Flexible leminates
Packaging code: Part 3 Ancillary materials Section 1
Cushioning materials
Packaging code: Part 3 Ancillary materials Section 2
Adhesive tapes for closing and sealing
Code of practice for packaging of microscopes for
export
Pocket knives
Forks, (table, fish, pastry and serving), stainless steel
Packaging code: Part 3 Ancillary materials Section 3
Tensional strapping
Packaging code: Part 3 Ascillary materials Section 4
Desiccants
Packaging code: Part 3 Ancillary materials Section 5
Twines and cords
Packaging code: Part 4 Packages Section 1 Metal
: Sec 1
IS 10106 : Part 4
: Sec 2
IS 10106 : Part 4
: Sec 3
IS 10106 : Part 4
: Sec 4
IS 10106 : Part 4
: Sec 5
IS 10106 : Part 4
: Sec 6
IS 11431
IS 12864 : Part 1
IS 12864 : Part 2
IS 13013 : Part 1
IS 14233
IS 726
IS 921
IS 922
IS 923
IS 924
IS 14312
IS 14328
IS 993
IS 994
IS 1660 : Part 1
IS 1660 : Part 5
IS 1660 : Part 7
IS 2347
IS 3257
IS 3258
IS 3411
IS 3424
IS 3545
containers
Packaging code: Part 4 Packages Section 2 Paper
and paper based packages
Packaging code: Part 4 Packages Section 3 Plastics
Packaging code: Part 4 Packages Section 4 Glass
containers
Packaging code: Part 4 Packages Section 5 Wooden
containers
Packaging code: Part 4 Packages Section 6
Fabrics/Textiles
Code of practice for the packaging of electrical
indicating and recording instruments
Code of practice for packaging of thermosflasks:Part
1 Complete flask
Code of practice for packaging of thermosflasks:Part
2 Glass refills
Code of practice for packaging thermal insulation
materials: Part 1 Slabs, mattressses and pipe-sections
made of fibrous materials
Packaging - Pharmaceutical products - Child
resistant tamper-proof packging for solid dosge
forms - Code of practice
Galvanized steel buckets for general use
Butcher's knives
Cook's knivers
Carving knives
Bread knives
Packaging - Packaging of TV picture
tubes/computer moniters - Code of practice
Packaging - Export packaging of diesel engines up
to 500 kg - Code of pracitice
Forks (table, fish, pastry and serving), brass and
nickel silver
Butter knives and fish knives
Wrought aluminium utensils : Part 1 Cooking table,
serving storing and baking utensils
Part 5 Thick bottom utensils
Part 7 Box, lunch
Domestic pressure cooker
Stainless steel compartmental trays
Stainless steel serving utensils
Stainless steel cooking utensils
Stainless steel table utensils
Meat choppers
IS 3546
IS 3721
IS 4109
IS 4119
IS 4230
IS 4536 : Part 1
IS 4536 : Part 2
IS 4536 : Part 3
IS 4768
IS 4822
IS 6291
IS 6808
IS 7185
IS 7211
IS 7257
IS 7376
IS 7763
IS 7813
IS 9040
IS 9246
IS 9730
IS 12197
IS 13395
IS 787
IS 1076 : Part 1
IS 4515
IS 4558
IS 4880 : Part 1
IS 4880 : Part 2
IS 4880 : Part 3
IS 1890 : Part 2
IS 1890 : Part 3
IS 1890 : Part 9
IS 4247 : Part 1
IS 1885 : Part 6
Vegetable knives
Cheese cutting knives for table use
Kadahies
Press-charcoal-burning
Lock, lever tumbler type
Composite bottom stainless steel cooking utensils
Part 1 Copper electrodeposited
Part 2, 3-Ply construction
Part 3 Copper Clad
Stainless steel buckets
Brass cooking utensils
Knife, clasp
Grinder, hand domestic
Boiler, milk, aluminium
Mincer, hand operated, clamp type
Trunks, steel, domestic
Culinary measures for household purposes
Extractor, juice, domestic
Box, aluminium, rectangular
Methods for sampling of utensils
Chapati machine
Non stick unreinforced plasticocatings on domestic
cooking utensils
Specification for padlocks, pin tumbler type
Performance of handles and handle assemblies
attacked to cookware
Guide for inter conversion of values from one
system f units to another
Preferred number : Part 1 Series of preferred number
Stone pitched lining for canals - Code of practice
Code of practice for under-drainage of lined canals
Code of practice for design of tunnels conveying
water: Part 1 General design
Code of practice for design of tunnels conveying
water: Part 2 Geometric design
Code of practice for design of tunnels conveying
water: Part 3 Hydraulic design
Quantities and Units : Part 2 Periodic and related
phenomena
Quamtotoes amd Units : Part 3 Mechanics
Quantities and units : Part 9 Atomic and nuclear
physics
Code of practice for structural design of surface
hydroelectric power stations: Part 1 Data for design
Electrotechnical vocabulary: Part 6 Printed circuits
IS 1885 : Part 31
IS 4247 : Part 2
IS 4247 : Part 3
IS 1890 : Part 10
IS 1890 : Part 12
IS 10005
IS 1885 : Part 3 :
Sec 1
IS 7331
IS 1885 : Part 3 :
Sec 2
IS 1885 : Part 3 :
Sec 4
IS 1885 : Part 3 :
Sec 5
IS 1885 : Part 3 :
Sec 7
IS 1885 : Part 3 :
Sec 8
IS 1885 : Part 4 :
Sec 1
IS 1885 : Part 36
IS 1885 : Part 40
IS 1885 : Part 50
IS 2264
IS 1885 : Part 4 :
Sec 2
IS 1885 : Part 4 :
Sec 3
IS 1885 : Part 4 :
Sec 4
IS 1885 : Part 4 :
Sec 5
IS 1885 : Part 4 :
Sec 6
IS 1885 : Part 4 :
Sec 7
IS 1885 : Part 4 :
Sec 8
Electrotechnical vocabulary: Part 31 Magnetism
Code of practice for structural design of surface
hydroelectric power stations: Part 2 Superstructure
Code of practice for structural design of surface
hydel power stations Part 3 Substructure
Quantities and units : Part 10 Nuclear reactions and
ionizing radiations
Quantites, units and symbols : Part 12 Characteristic
number
SI units and recommendations for the use of their
multiples and of certain other units
Electrotechnical vocabulary: Part 3 Acoustics, Sec 1
Physical acoustics
Code of practice for inspection and maintenance of
cross-drainage works
Electrotechnical vocabulary: Part 3 Acoustics, Sec 2
Acoustical and electro-acoustical systems
Electrotechnical vocabulary: Part 3 Acoustics, Sec 4
Sonics, ultrasonics and underwater acoustics
Electrotechnical vocabulary: Part 3 Acoustics, Sec 5
Speech and hearing
Electrotechnical vocabulary: Part 3 Acoustics, Sec 7
Music
Electrotechnical vocabulary: Part 3 Acoustics, Sec 8
Architectural acoustics
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 1 Common terms
Electrotechnical vocabulary: Part 36 Interference
Electrotechnical vocabulary: Part 40 Connectors
Electrotechnical vocabulary: Part 50 Telecontrol
Preferred frequencies for acoustical measurements
Electrotechnical vocabulary: Part 4 Electron
tubes,Sec 2 X-ray tubes
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 3 Microwave tubes
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 4 Cathode-ray tubes
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 5 Pulse terms
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 6 Noise in microwave tubes
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 7 Camera tubes
Electrotechnical vocabulary: Part 4 Electron tubes,
Sec 8 Photosensitive devices
IS 1885 : Part 7 :
Sec 1
IS 1885 : Part 7 :
Sec 3
IS 1885 : Part 7 :
Sec 6
IS 1885 : Part 12
IS 1885 : Part 18
IS 1885 : Part 19
IS 1885 : Part 20
IS 2382
IS 7136
IS 8225
IS 1885 : Part 22
IS 1885 : Part 23
IS 1885 : Part 24
IS 1885 : Part 25
IS 1885 : Part 52
: Sec 2
IS 1885 : Part 52
: Sec 3
IS 1885 : Part 52
: Sec 8
IS 1885 : Part 52
: Sec 9
IS 1885 : Part 52
: Sec 10
IS 1885 : Part 52
: Sec 11
IS 1885 : Part 52
: Sec 14
IS 1885 : Part 52
Electrotechnical vocabulary: Part 7 Semiconductor
devices, Sec 1 General
Electrotechnical vocabulary: Part 7 Semiconductor
devices, Sec 3 Transistors
Electrotechnical vocabulary: Part 7 Semiconductor
devices, Sec 6 Optoelectronic devices
Electrotechnical vocabulary: Part 12 Ferrimagnetic
oxide materials
Electrotechnical vocabulary: Part 18 General terms
of radio-communications
Electrotechnicalvocabulary: Part 19 Radio
communication circuits
Electrotechnical vocabulary: Part 20 Radio-wave
propagation
Recommended mounting dimensions of
loudspeakers
Specification for Megaphones
Measurement of sound absorption in a reverberation
room
Electrotechnical vocabulary: Part 22 Equipment for
radio communications, transmitting and receiving
Electrotechnical vocabulary: Part 23 Radio
telegraphy and mobile radio
Electrotechnical vocabulary: Part 24 Broadcasting,
sound and television
Electrotechnical vocabulary: Part 25 Radiolocation
and radio navigation
Electrotechnical vocabulary: Part 52 Data
processing, Sec 2 Arithmatic and logic operations
Electrotechnical vocabulary: Part 52 Data
processing, Sec 3 Equipment technology (selected
terms)
Electrotechnical vocabulary: Part 52 Data
processing, Sec 8 Control, input-output and
arithmatic equipment
Electrotechnical vocabulary: Part 52 Data
processing, Sec 9 Data media, storage and related
equipment
Electrotechnical vocabulary: Part 52 Data
processing, Sec 10 Data communication
Electrotechnical vocabulary: Part 52 Data
processing, Sec 11 Operating technique and facilities
Electrotechnical vocabulary: Part 52 Data
processing, Sec 14 Computer graphics and computer
micrographics
Electrotechnical vocabulary: Part 52 Data
: Sec 15
IS 9001 : Part 1
IS 9186
IS 1882
IS 1885 : Part 56
IS 1885 : Part 58
IS 1885 : Part 59
IS 1885 : Part 63
IS 1885 : Part 64
: Sec 1
IS 1885 : Part 64
: Sec 2
IS 1885 : Part 65
: Sec 1
IS 1885 : Part 66
IS 1885 : Part 67
IS 1885 : Part 68
IS 2032 : Part 8
IS 2032 : Part 9
IS 2032 : Part 13
IS 9098
IS 9167
IS 7144
IS 5000 : OD 7
IS 2032 : Part 16
IS 2032 : Part 17
IS 2032 : Part 20
processing, Sec 15 Programming languages
Guidance for environmental testing: Part 1 General
Guide for screening of electronic and electrical items
Code of practice for outdoor installation of public
address system
Electrotechnical vocabulary: Part 56 Microwave
components and accessories [superseding IS
1885(Part 13/Sec 1):1968 and IS 1885(Part 13/Sec
2):1967]
Electrotechnical vocabulary: Part 58
Telecommunication channels and networks
Electrotechnical vocabulary: Part 59 Educational or
training equipment and systems
Electrotechnical vocabulary: Part 63 Nuclear
instrumentation
Electrotechnical vocabulary: Part 64
Electromagnetic compatibility, Sec 1 General terms
Electrotechnical vocabulary: Part 64
Electromagnetic compatibility, Sec 2 Specific terms
Electrotechnical vocabulary: Part 65 Transmission,
Sec 1 General aspects of transmission [(sec 1 to 5)
under one volume]
Electrotechnical vocabulary: Part 66 Space radio
communications
Electrotechnical vocabulary: Part 67 Mechanical
structures for electronic equipment
Electrotechnical Vocabulary: Part 68 Surface
Acoustic Wave (SAW) Filters
Graphical symbols used in electrotechnology: Part 8
Semiconductor devices
Graphical symbols used in electrotechnology: Part 9
Electron tubes (other than microwave tubes)
Graphical symbols used in electrotechnology: Part
13 Microwave tubes
Specification for pure tone audiometers
Specification for ear protectors
Methods of measurements on camera tubes
Dimensions of semiconductor devices: Device
outline OD 7
Graphical symbols used in electrotechnology: Part
16 Aerials
Graphical symbols used in electrotechnology: Part
17 Ferrite cores and magnetic storage matrices
Graphical symbols used in electrotechnology: Part
20 Radio communication transmission circuits, lines
and accessories
IS 2032 : Part 24
IS 12032 : Part 5
IS 12032 : Part 9
IS 12032 : Part
12
IS 12857
IS 9000 : Part 1
IS 9000 : Part 2 :
Sec 1
IS 9000 : Part 3 :
Sec 1
IS 9000 : Part 4
IS 9000 : Part 5 :
Sec 1
IS 9000 : Part 6
IS 9000 : Part 7 :
Sec 1
IS 9000 : Part 7 :
Sec 6
IS 9000 : Part 8
IS 9000 : Part 9
IS 9000 : Part 10
IS 9000 : Part 11
IS 9000 : Part 12
Graphical symbols used in electrotechnology: Part
24 Binary logic elements
Graphical symbols for diagrams in the field of
electrotechnology: Part 5 Semiconductors and
electron tubes
Graphial symbols for diagrams in the field of
electrotechnology: Part 9 Telecommunications,
switching and peripheral equipment
Graphical symbols for diagrams in the field of
electrotechnology:Part 12 Binary logic elements
General principles for the creation of graphicals
symbols for use on equipment
Basic environmental testing procedures for
electronic and electrical items: Part 1 General
Basic environmental testing procdures for electronic
and electrical items: Part 2 Cold test, Sec 1 General
Basic environmental testing procedures for
electronic and electrical items: Part 3 Dry heat test,
Sec 1 General
Basic environmental testing procedures for
electronic and electrical items: Part 4 Damp heat
(steady state)
Basic environmental testing procedures for
electronic and electrical items: Part 5 Damp heat
(cyclic) test, Sec 1 16 + 8h cycle
Basic environmental testing procedures for
electronic and electrical items: Part 6 Composite
temperature/humidity cyclic test
Basic environmental testing procedures for
electronic and electrical items: Part 7 Impact test,
Sec 1 Shock
Basic environmental testing procedures for
electronic and electrical items: Part 7 Impact test,
Section 6 Test Ee: Bounce
Basic environmental testing procedures for
electronic and electrical items: Part 8 Vibration
(sinusoidal) test
Basic environmental testing procedures for
electronic and electrical items: Part 9 Acceleration
(steady state)
Basic environmental testing procedures for
electronic and electrical items: Part 10 Mould
growth test (Redesignation of IS:7805-1975)
Basic environmental testing procedures for
electronic and electrical items: Part 11 Salt mist test
Basic environmental testing procedures for
IS 9000 : Part 13
IS 9000 : Part 14
: Sec 1
IS 9000 : Part 16
IS 9000 : Part 17
IS 9000 : Part 19
: Sec 1
IS 9000 : Part 20
IS 9000 : Part 21
IS 9000 : Part 22
IS 9000 : Part 23
IS 9000 : Part 25
IS 9000 : Part 26
IS 9000 : Part 27
IS 9000 : Part 31
IS 9001 : Part 2
IS 9001 : Part 3
IS 9001 : Part 6
electronic and electrical items: Part 12 Dust test
Basic environmental testing procedures for
electronic and electrical items: Part 13 Low air
pressure test
Basic environmental testing procedures for
electronic and electrical items:Pt 14 Test N:Change
of temp., Sec 1 Test Na: Rapid change
temperature(thermal shock)with prescribed time of
Transition-Two method
Basic environmental testing procedures for
electronic and electrical items 16 Driving rain test
Basic environmental testing procedures for
electronic and electrical items: Part 17 Radiation test
Basic environmental testing procedures for
electronic and electrical items: Part 19 Test U:
Robustness of terminations and integral mounting
devices, Sec 1 Test Ua1: Tensile
Basic environmental testing procedures for
electronic and electrical items: Part 20 Resistance to
cleaning solvents and permanence of markings
Basic environmental testing procedures for
electronic & electrical items: Part 21 Acoustics noise
test
Basic environmental testing procedures for
electronic and electrical items: Part 22 Fine mist test
Basic environmental testing procedures for
electronic and electrical items: Part 23 Drip proof
test
Basic environmental testing procedures for
electronic and electrical items: Part 25 Hydrogen
sulphide test for contacts and connections
Basic environmental testing procedures for
electronic & electrical items: Part26 Sulphur dioxide
test for contacts and connections
Basic environmental testing procedures for
electronic and electrical items: Part 27 Ultrasonic
cleaning test
Basic environmental testing procedures for
electronic and electrical items: Part 31 Combined
cold/low air pressure tests
Guidance for environmental testing:Part 2 Cold and
dry heat tests
Guidance for environmental testing: Part 3 Change
of temperature
Guidance for environmental testing: Part 6
Hydrogen sulphide test for contacts and connections
IS 9001 : Part 9
IS 9001 : Part 15
IS 9001 : Part 16
IS 9001 : Part 17
: Sec 5
IS 9001 : Part 18
IS 9002 : Part 1
IS 9002 : Part 2
IS 9002 : Part 3
IS 9002 : Part 4
IS 9002 : Part 5
IS 9002 : Part 6
IS 9002 : Part 7
IS 9002 : Part 9
IS 9002 : Part 10
: Sec 1
IS 9002 : Part 11
IS 9002 : Part 12
IS 9002 : Part 13
: Sec 1
IS 9002 : Part 13
: Sec 3
IS 9002 : Part 14
Guidance for environmental testing: Part 9
Solderability and resistance to soldering heat
Guidance for environmental testing: Part 15
Acceleration (steady state) test
Guidance for environmental testing: Part 16
Acoustic noise test
Guidance for environmental testing: Part 17 Impact
test, Sec 5 Bounce
Guidance for environmental testing: Part 18
Ultrasonic cleaning test
Equipment for environmental tests for electronic and
electrical items: Part 1 Chamber for cold test
Equipment for environmental tests for electronic and
electrical items: Part 2 Chamber for dry heat test
Equipment for environmental tests for electronic and
electrical items: Part 3 humidity chamber
Equipment for environmental tests for electronic and
electrical items: Part 4 Chamber for mould growth
test
Equipment for environmental tests for electronic and
electrical items: Part 5 Equipment for vibration
(sinusoidal) test
Equipment for environmental tests for electronic and
electrical items: Part 6 Constant relative humidity
chamber (non-injection type)
Equipment for environmental tests for electronic and
electrical items: Part 7 Bump test machine
Equipment for environmental tests for electronic and
electrical items: Part 9 Acceleration (steady state)
test machine
Equipment for environmental tests for electronic and
electrical items: Part 10 Shock test machine,Sec 1
Free fall type
Equipment for environmental tests for electronic and
electrical items: Part 11 Drop/toppling and free fall
test machine (platform)
Equipment for environmental tests for electronic and
electrical items: Part 12 Salt mist/fine mist chamber
Equipment for environmental tests for electronic and
electrical items: Part 13 Equipment for change of
temperature test, Sec 1 Two chamber system
Equipment for environmental tests for electronic and
electrical items: Part 13 Equipment for change of
temperature test, Sec 3 Two baths
Equipment for environmental tests for electronic and
electrical items: Part 14 Low air pressure chamber
IS 9002 : Part 15
IS 11000 : Part 1
: Sec 1
IS 11000 : Part 1
: Sec 2
IS 11000 : Part 1
: Sec 3
IS 11000 : Part 2
: Sec 1
IS 11000 : Part 2
: Sec 2
IS 11000 : Part 2
: Sec 3
IS 11000 : Part 3
: Sec 1
IS 13736 : Part 1
IS 13736 : Part 2
: Sec 1
IS 13736 : Part 2
: Sec 2
IS 13736 : Part 2
: Sec 3
IS 13736 : Part 2
: Sec 4
IS 13736 : Part 2
: Sec 7
IS 13736 : Part 3
: Sec 0
Equipment for environmental tests for electronic and
electrical items: Part 15 Low air pressure and
temperature chamber
Fire hazard testing: Part 1 Guidance for the
preparation of requirements and test specifications
for assessing fire hazard of electronic and electrical
items, Sec 1 General guidance
Fire hazard testing : Part 1 Guidance for the
preparation of requirements and test specifications
for assessing fire hazard of electronic and electrical
items, Sec 2 Guidance for electronic components
Fire hazard testing: Part 1 Guidance for the
preparation of requirements and test specifications
for assessing fire hazard of electronic and electrical
items, Section 3 Guidance for use of preselection
Fire hazard testing: Part 2 Test methods,Sec 1 Glowwire test and guidance
Fire hazard testing: Part 2 Test methods,Sec 2
Needle-flame test
Fire hazard testing: Part 2 Test methods, Sec 3 Badconnection test with heaters
Fire hazard testing: Part 3 Examples of fire hazard
assessment procedures and interpretaton of results,
Sec 1 Combustion characteristics and survey of test
methods for their determination
Classification of environmental conditions: Part 1
Classification of environmental parameters and their
severities
Classification of environmental conditions: Part 2
Environmental conditions appearing in nature, Sec 1
Temperature and humidity
Classification of environmental conditions: Part 2
Environmental condition appearing in nature, Sec 2
Precipitation and wind
Classification of environmental conditions: Part 2
Environmental conditions appearing in nature, Sec 3
Air pressure
Classification of environmental conditions, Part 2
Environmental conditions appearing in nature, Sec 4
Solar radiation and temperature
Classification of environmental conditions:Part 2
Environmental conditions appearing in nature, Sec 7
Fauna and flora
Classification of nevironmental conditions: Part 3
Classification of groups of environmental
parameters and their severities, Sec 0 Introduction
IS 13736 : Part 3
: Sec 1
IS 13736 : Part 3
: Sec 2
IS 13736 : Part 3
: Sec 3
IS 13736 : Part 3
: Sec 4
IS 13736 : Part 3
: Sec 5
IS 13736 : Part 3
: Sec 6
IS 7354 : Part 1
IS 7354 : Part 2
IS 7354 : Part 4
IS 7354 : Part 5
IS 7354 : Part 6
IS 7690
IS 8161 : Part 1
IS 8161 : Part 2
IS 8161 : Part 3 :
Classification of environmental conditions : Part 3
Classification of groups of environmental
parameters and their severities, Sec 1 Storage
Classification of environmental conditions: Part 3
Classification of groups of environmental
parameters and their severities, Sec 2 Transportation
Classification of environmental conditions: Part 3
Classification of groups of environmental
parameters and their severities, Sec 3 Stationary use
at weather protected locations
Classification of environmental conditions:Part 3
Classification of groups of environmental
parameters and their severities, Sec 4 Stationary use
at non-weatherprotected locations
Classification of environmental conditions: Part 3
Classification of groups of environmental
parameters and their severities, Sec 5 Ground
vehicle installations
Classification of environmental conditions:Part 3
Classification of groups of environmental
parameters and their severities, Sec 6 Ship
environment
Guide on reliability of electronic and electrical
items: Part 1 Preliminary reliability considerations
Guide on reliability of electronic and electrical
items: Part 2 Guide on reliability of electronic and
electrical items: Part 3 Presentation of reliability
data on electronic and components(or parts)
Guide on reliability of electronic and electrical
items: Part 4 Collection of reliability,availability and
maintainability data from performance
Guide on reliability of electronic and electrical
items: Part 5 Inclusion of lot-by-lot and periodic
inspection procedures in specifications electronic
and electrical components (or parts)
Guide on reliability of electronic and electrical
items: Part 6 Inclusion of reliability clauses into
specifications for components (or parts)
Mathematical guide to the terms and definitions for
reliability of electronic equipment and components
(or parts) used therein
Guide for equipment reliability testing: Part 1
Principles and procedures
Guide for equipment reliability testing: Part 2
Design of test cycles
Guide for equipment reliability testing: Part 3
Sec 1
IS 8161 : Part 3 :
Sec 2
IS 8161 : Part 4
IS 8161 : Part 5
IS 8161 : Part 6 :
Sec 2
IS 8161 : Part 7
IS 9185 : Part 1
IS 9185 : Part 2
IS 9692 : Part 1
IS 9692 : Part 2
IS 9692 : Part 3
IS 9692 : Part 4
IS 9692 : Part 5
IS 9692 : Part 7
IS 9692 : Part 8 :
Sec 1
IS 9692 : Part 8 :
Sec 2
IS 9692 : Part 8 :
Sec 3
Preferred test conditions for equipment reliability
testing, Sec 1 Indoor portable equipment ( degree of
simulation)
Guide for equipment reliability testing: Part 3
Preferred test conditions for equipment reliability
testing, Sec 2 Equipment for stationary use weather
protected locations (high degree of simulation)
Guide for equipment reliability testing: Part 4
Procedure for determining point estimates and
confidence limits from equipment determination
tests
Guide for equipment reliability testing: Part 5
Compliance test plans for success ratio
Guide for equipment reliability testing: Part 6 Tests
for validity of a constant failure rate assumption, Sec
2 Kolmogorov-smirnov test
Guide for equipment reliability testing: Part 7
Compliance test plans for failure rate and mean time
between failures assuming constant failure rate
Endurance (life) test for electronic and electrical
components: Part 1 Thermal endurance
Endurance (life)test for electronic and electrical
components: Part 2 Mechanical endurance
Guide on maintainability of equipment: Part 1
Introduction to maintainability
Guide on maintainability of equipment: Part 2
Maintainability requirements in specifications and
contracts
Guide on maintainability of equipment: Part 3
Maintainability programme
Guide on maintainability of equipment: Part 4 Test
and diagnostic procedures
Guide on maintainability of equipment: Part 5
Maintainability studies during the design phase
Guide on maintainability of equipment: Part 7
Collection, analysis and presentation of data related
to maintainability
Guide on maintainability of equipment: Part 8
Maintenance and maintenance support planning, Sec
1 General
Guide on maintainability of equipment: Part 8
Maintenance and maintenance support planning, Sec
2 Maintenance support analysis
Guide on maintainability of equipment: Part 8
Maintenance and maintenance support planning, Sec
3 Maintenance planning analysis
IS 9692 : Part 8 :
Sec 4
IS 10139
IS 11137 : Part 2
IS 11743
IS 1881
IS 4755
IS 6964
IS 7194
IS 7709
IS 7741 : Part 3
IS 7741 : Part 4
IS 8159
IS 9302 : Part 1
IS 9302 : Part 2
IS 9779
IS 10423
IS 10467
IS 10879
IS 9302 : Part 3
IS 9302 : Part 4
IS 9302 : Part 6
Guide on maintainability of equipment: Part 8
Maintenance and maintenance supporting planning,
Sec 4 Maintenance support resources requirements
Presentation of reliability, maintainability and
availability predictions
Analysis techniques for system reliability:Part 2
Procedures for failure mode and effects analysis
(FMEA) and failure mode, effects and analysis
(FMECA)
Guide on human safety in design, manufacture, use
and maintenance of electronic equipment
Code of practice for installation of indoor
amplifying and sound distribution systems
Reference zero for the calibration of puretone air
conduction audiometers
Octave, half-octave and third-octave band filters for
analysis of sound and vibrations
Assessment of noise exposure during work for
hearing conservation purposes
Specification for standrd hydrophone in the
frequency range 1 Hz to 100 kHz
Specification for loudspeakers: Part 3 Pressure unit
operated horn loudspeakers (superseding IS
1032:1957)
Specification for loudspeakers: Part 4 Loudspeakers
for community radio receivers (superseding IS
1034:1975)
Scales and sizes for plotting frequency
characteristics and polar diagrams
Characteristics and methods of measurements for
sound system equipment: Part 1 General
Characteristics and methods of measurements for
sound system equipment: Part 2 Amplifiers
(superseding IS 1302:1958)
Sound level meters (superseding IS:3931-1966 and
3932-1966)
Personal sound exposure meter
Listening test on loudspeakers
Dimensions of nipples for insert earphones
Characteristics and methods of measurements for
sound system equipment: Part 3 Microphones
(superseding IS 2748:1964)
Characteristics and methods of measurements for
sound systems equipment:Part 4 Loudspeaker
[superseding IS 7741(Part 1):1975]
Characteristics and methods of measurements for
IS 9302 : Part 7
IS 9302 : Part 9 :
Sec 1
IS 9302 : Part 9 :
Sec 2
IS 9302 : Part 9 :
Sec 3
IS 9302 : Part 10
IS 9551 : Part 1
IS 9551 : Part 2
IS 9551 : Part 3
IS 3452 : Part 1
IS 3452 : Part 2
IS 9551 : Part 6
IS 9876
IS 9901 : Part 1
IS 9901 : Part 2
IS 9901 : Part 3
IS 9901 : Part 4
IS 9901 : Part 5
sound system equipment: Part 6 Headphones and
head sets
Characteristics and methods of measurements for
sound system equipment: Part 7 Automatic gain
control devices
Characteristics and methods of measurements for
sound system equipment: Part 9 Programme level
meters, Sec 1 General
Characteristics and methods of measurements for
sound system equipment: Part 9 Programme level
meters, Sec 2 Peak programme meters, Type 1
Characteristics and methods of measurements for
sound system equipment: Part 9 Programme level
meters, Sec 3 peak programme meters, Type 2
Characteristics and methods of measurements for
sound system equipment: Part 10 Preferred matching
values for the inter-connection of sound system
components
Specification for high-fidelity audio equipment and
systems: Part 1 General
Specification for high-fidelity audio equipment and
systems: Part 2 Amplifiers
Specification for high-fidelity audio equipment and
systems: Part 3 Loudspeakers
Toggle switches: Part 1 General requirements and
tests
Toggle switches: Part 2 Toggle switches, Type 1 and
Type 2
Specification for high-fidelity audio equipment and
systems: Part 6 Microphones
Guide to the measurement of airborne acoustical
noise and evaluation of its effects on man
Measurement of sound insulation in buildings and of
building elements: Part 1 Requirements for
laboratories
Measurement of sound insulation in buildings and of
building elements: Part 2 Statement of precision
requirements
Measurement of sound insulation in buildings and of
building elements: Part 3 Laboratory measurements
of airborne sound insulation of building elements
Measurement of sound insulation in buildings and of
building elements: Part 4 Field measurements of
airborne sound insulation between rooms
Measurement of sound insulation in buildings and of
building elements: Part 5 Field measurements of
IS 9901 : Part 6
IS 9901 : Part 7
IS 9901 : Part 8
IS 3720
IS 7751 : Part 2
IS 9606
IS 9901 : Part 9
IS 10426
IS 10776 : Part 1
IS 10776 : Part 2
IS 10776 : Part 3
IS 10776 : Part 4
IS 10779
IS 10781
IS 11024
IS 11025
airborne sound insulation of facade elements and
facades
Measurement of sound insulation buildings and
building elements: Part 6 Laboratory measurements
of impact sound insulation of floors
Measurement of sound insulation in buildings and of
building elements: Part 7 Field measurements of
impact sound insulation of floors
Measurement of sound insulation in buildings and of
building equipments: Part 8 Laboratory
measurements of the reduction of transmitted impact
noise by floors ccoverings on a standard floor
Dimensions of polarised plugs for hearing aid
Slide switches: Part 2 Slide switches, Type 1
Dimensions of panels and racks (482.6 mm systems)
Measurement of sound insulation in buildings and of
building elements: Part 9 Laboratory measurement
of room to room airborne sound insulation of a
suspended ceiling with a plenum above it
Public address amplifiers (superseding IS 1490:1959
and IS 1819:1961)
Methods of measurement of electroacoustical
characteristics of hearing aids: Part 1 General
measurements for air-conduction hearing aids
(superseding IS 3641:1976)
Methods of measurement of electro-acoustical
characteristics of hearing aids: Part 2 Additional
measurements for hearing aids with induction pickup coil input
Methods of measurement of electro-acoustical
characteristics of hearing aids: Part 3 Additional
measurements for hearing aids with automatic gain
control circuits
Methods of measurement of electro-acoustical
characteristics of hearing aids: Part 4 Aid with bone
vibrator
Provisional reference coupler for the calibration of
earphones used in audiometry
Reference coupler for the measurement of hearing
aids using earphones coupled to the ear by means of
ear inserts
Standard reference zero for the calibration of puretone bone conduction audiometers and guidelines for
its practical application
Symbols and other markings on hearing aids and
related equipment
IS 11449
IS 11456 : Part 1
IS 11456 : Part 2
IS 2926
IS 2628 : Part 2
IS 3826 : Part 2
IS 4007 : Part 1
IS 4007 : Part 2 :
Sec 1
IS 4007 : Part 2 :
Sec 2
IS 4007 : Part 2 :
Sec 3
IS 4007 : Part 2 :
Sec 4
IS 4007 : Part 2 :
Sec 5
IS 4007 : Part 2 :
Sec 6
IS 4794 : Part 2
IS 5033
IS 6089 : Part 1
IS 4007 : Part 2 :
Sec 7
IS 4007 : Part 2 :
Sec 8
Mechanical coupler for measurement on bone
vibrators
Conference systems: Part 1 General
Conference system: Part 2 Electrical requirements
Dimensions of connectors for radio batteries
Rotary wafer switches (Low current rating): Part 2
Rotary wafer switches with central mounting
Connectors for frequencies below 3 MHz: Part 2
Battery connectors for electronic equipment
Terminals for electronic equipment: Part 1 General
requirements and tests
Terminals for Electronic Equipment:Part 2 Detail
specification for terminals, Section 1 Terminal,
insulated, with insulated captive screw cap, Type
TSC 1
Terminals for Electronic Equipment:Part 2 Detail
Specification for terminals, Section 2 Terminal, noninsulated, with insulated captive screw cap, Type
TSC 2
Terminals for Electronic Equipment: Part 2 Detail
specification for Terminals, Sec 3 Terminal, noninsulated, with insulated captive screw cap, Type
TSC 3
Terminals for Electronic Equipment:Part 2 Detail
Specification for terminals, Section 4 Terminal,
insulated, with insulated captive screw cap; Type
TSC 4
Terminals for Electronic Equipment: Part 2 Detail
Specification for terminals, Section 5 Terminal,
insulated, side slotted, with insulated captive screw
cap, Type TSC 5
Terminals for Electronic Equipment:Part 2 Detail
Specification for terminals, Section 6 Terminal, noninsulated, with insulated captive spring cap, tapped
hole panel mounting, Type TSL
Push button switches: Part 2 Push button switches,
Type 1
Telescopic aerials for portable radio receivers
Sensitive switches: Part 1 General requirements and
tests
Terminals for Electronic Equipment:Part 2 Detail
Specification for terminals, Section 7 Terminal, noninsulated, with insulated captive springg cap, Type
TSL 2
Terminals for Electronic Equipment:Part 2 Detail
Specification for terminals Section 8 Terminal,
IS 4007 : Part 2 :
Sec 9
IS 4007 : Part 2 :
Sec 10
IS 4586 : Part 1 :
Sec 2
IS 4586 : Part 1 :
Sec 4
IS 4586 : Part 1 :
Sec 7
IS 4586 : Part 1 :
Sec 8
IS 4586 : Part 1 :
Sec 9
IS 6089 : Part 2
IS 7751 : Part 1
IS 4586 : Part 2 :
Sec 1
IS 4586 : Part 2 :
Sec 2
IS 4794 : Part 1
IS 4795 : Part 2
IS 5051 : Part 1
IS 5051 : Part 2 :
Sec 1
IS 5051 : Part 3 :
Sec 1
IS 5054 : Part 1 :
insulated, with insulated captive spring cap, Type
TSL 3
Terminals for electronic equipment: Part 2 Detail
specification for terminals, Sec 9 Terminal insulated,
with insulated captive spring cap, Type TSL 4
Terminals for Electronic Equipment:Part 2 Detail
Specification for terminals Section 10 Terminal,
insulated, with insulated captive spring cap, Type
TSL 5
Dimensions of spindles and mounting arrangements
for spindle operated electronic components: Part 1
Spindles, Sec 2 Plain round spindle
Dimensions of spindles and mounting arrangements
for spindle operated electronic components: Part 1
Spindles, Sec 4 Slotted spindle
Dimensions of spindles and mounting arrangements
for spindle operated electronic components: Part 1
Spindles, Sec 7 Concentric spindle
Dimensions of spindles and mounting arrangements
for spindle operated electronic components: Part 1
Spindles, Sec 8 Double flatted spindle
Dimensions of spindles and mounting arrangements
for spindle operated electronic components: Part 1
Spindles, Sec 9 Knurled spindle
Sensitive switches: Part 2 SPDT unsealed, Type 1
Slide switches: Part 1 General requirements and tests
Dimensions of spindles and mounting arrangements
for spindle operated electronic components: Part 2
Mounting arrangements, Sec 1 Components and
panels cut-outs
Dimensions of spindle and mounting arrangements
for spindle operated electronic components: Part 2
Mounting arrangements, Sec 2 Fixing nuts
Push-button switches: Part 1 General requirements
and tests
Holders for indicator lamps for electronic and
telecommunication equipment: Part 2 Type E 10, E
14 and BA 9
Relays for electronic and telecommunication
equipment: Part 1 General requirements and tests
Relays for electronics and telecommunication
equipment: Part 2 Reed relays, Sec 1 General
Relays for electronic and telecommunication
equipment: Part 3 Armature relays, nonsealed,Sec 1
Type RA 1
Radio frequency connectors: Part 1 General
Sec 1
IS 5054 : Part 1 :
Sec 2
IS 5054 : Part 1 :
Sec 3
IS 6102 : Part 1
IS 9891 : Part 1
IS 9891 : Part 2
IS 9891 : Part 3
IS 9891 : Part 4
IS 10482 : Part 1
IS 10482 : Part 2
IS 10482 : Part 3
IS 10482 : Part 4
IS 4579
IS 4697
requirements and measuring methods, Sec 1 General
Radio frequency connectors:Pt 1 General
requirements and measuring methods:Sec 2
Electrical tests and measuring procedures:
Reflection factor
Radio frequency connectors : Part 1 General
requirements and measuring methods: Sec 3
Electrical tests and measuring procedures :
Screening effectiveness - [second revision)
Finger knobs used in electronic and
telecommunication equipment: Part 1 General
requirements and tests
Edge connectors for printed wiring board and
insulated board, having a contact pitch of 2.54 mm:
Part 1 Test schedule and requirements
Edge connectors for printed wiring board and
insulated board, having a contact pitch of 2.54 mm:
Part 2 Non-polarized plug types 9891 IS01011/25/33-W-A-0.75
Edge connectors for printed wiring board and
insulated board, having a contact pitch of 2.54 mm :
Part 3 Non-polarised plug types 9891 IS-0211/25/33-I-A-0.75
Edge connectors for printed wiring board and
insulated board, having a contact pitch of 2.54 mm:
Part 4 Non-polarised socket types 9891 IS-0311/25/33-W/I-A/B- 0.75
Connectors for printed wiring board: Part 1 Test
schedule and requirements
Connectors for printed wiring board: Part 2 Male
adapter, contact spacing 3.962 mm Category 'C'
Types 10482 IS-01-6/10/12/15/16/18/22-a/b-2-A5/1.27 or 2.54/0.4
Connectors for printed wiring board: Part 3 Socket,
Card insertion,contact spacing 3.962 mm Category
'A' Types 10482 IS-02-6 10/12/15/16/18/22-a/b-2A/B/C-5/1.27 or 2.54/0.4
Connectors for printed wiring board: Part 4 Socket,
Card-insertion, contact spacing 3.692 mm,
categories A and AD types 10482 IS-036/10/15/18/22/28/36/43-a/b-2/3/4-A/B/C-5/1.27 to
2.54/0.4
Methods of measurements on television picture
tubes
Methods of measurements on Geiger Muller counter
tubes
IS 5840 : Part 1
IS 10544 : Part 1
IS 10544 : Part 2
IS 10544 : Part 3
IS 11075 : Part 1
IS 11075 : Part 2
: Sec 1
IS 11075 : Part 2
: Sec 2
IS 11075 : Part 2
: Sec 3
IS 11162 : Part 1
IS 11162 : Part 2
IS 11162 : Part 3
IS 11162 : Part 4
IS 11162 : Part 5
IS 5840 : Part 2
IS 5840 : Part 3
IS 6136
IS 11162 : Part 6
IS 11162 : Part 7
IS 11162 : Part 8
IS 11719 : Part 1
: Sec 1
IS 11719 : Part 1
: Sec 2
Dimensions of cathode-ray tubes: Part 1 Tube outlines
Specification for radio drive cords: Part 1 Braided
Nylon, Silk core
Specification for radio drive cords: Part 2 Woven
Nylon, Glass core
Specification for radio drive cords: Part 3 Braided
polyester, Nylon core
Radio frequency connectors of BNC, TNC and UHF
series: Part 1 Test schedule and requirements
Radio frequency connectors of BNC, TNC and UHF
series: Part 2 BNC series, Sec 1 Straight plug, male,
cabled, Type 11075 IS-01-01 to 04 and 50 to 54
Radio frequency connectors of BNC, TNC and UHF
series: Part 2 BNC Series, Sec 2 Cabled socket
11075 IS-02-01 to 02 and 50 to 51
Radio frequency connectors of BNC, TNC and UHF
Series: Part 2 BNC Series, Sec 3 Plug, Right
angle,Cabled Type 11075 IS-03-01 to 02 and 50 to
51
Dimensions of non-insulated terminal tags for
electronic equipment: Part 1 Type 1
Dimensions of non-insulated terminal tags for
electronic equipment : Part 2 Type 2
Dimensionsof non-insulated terminal tags for
electronic equipment : Part 3 Type 3
Dimensions of non-insulated terminal tags for
electronic equipment: Part 4 Type 4
Dimensions of non-insulated terminal tags for
electronic equipment : Part 5 Type 5
Dimensions of cathode-ray tubes: Part 2 Bases
Dimensions of cathode-ray tubes: Part 3 EHT
terminals
Basic requirements for cathode-ray tubes
Dimensions of non-insulated terminal tags for
electronic equipment : Part 6 Type 6
Dimensions of non-insulated terminal tags for
electronic equipment : Part 7 Type 7
Dimensions of non-insulated terminal tags for
electronic equipment: Part 8 Type 8
Dimensions of mechanical structures of the 482.6
mm series: Part 1 Cabinets and pitches of rack
structures, Sec 1 Cabinets
Dimensions of mechanical structures of the 482.6
mm series: Part 1 Cabinets and pitches of rack
structures, Sec 2 Pitches of rack structures
IS 11719 : Part 2
: Sec 1
IS 11719 : Part 2
: Sec 2
IS 11777 : Part 1
IS 11777 : Part 2
IS 11777 : Part 3
IS 6214
IS 6757
IS 6758
IS 11777 : Part 4
IS 11777 : Part 5
IS 11777 : Part 6
IS 11777 : Part 7
IS 11777 : Part 8
IS 11777 : Part 9
Dimensions of mechanical structures of the 482.6
mm series: Part 2 Subracks and associated plug-inunits, Sec 1 Subracks
Dimensions of mechanical structures of the 482.6
mm series: Part 2 Subracks and associated plugin=units, Sec 2 Plug-in units
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc:Part 1 Test schedule and requirements
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 2 Free three-pin connector for microphone,
Type 11777 IS-01
Circular Connectors for Radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 3 Fixed three-socket connector for sound
equipment, Type 11777 IS-02
Phosphors for cathode-ray tubes
Dimensions for high tension cable terminations for
X-ray tubes
Dimensions for high tension receptacles for X-ray
tubes
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 4 Free five-pin connector for record player
and tape recorder, Type 11777 IS-03
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 5 Fixed five-socket connector for record
player and tape recorder, Type 11777 IS-04
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 6 Free seven-pin connector for stereo tape
player with car radio Type 11777 IS-05
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 7 Fixed seven-socket connector for stereo
tape player with car radio, Type 11777 IS-06
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 8 Free Seven-pin connector for micro phone
with remote control, Type 11777 IS-07
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 9 Fixed seven-socket connector for
microphone with remote control, Type 11777 IS-08
IS 11777 : Part
10
IS 11777 : Part
11
IS 11777 : Part
12
IS 11777 : Part
13
IS 11777 : Part
14
IS 11777 : Part
15
IS 11778 : Part 1
IS 11779 : Part 1
IS 12195 : Part 1
: Sec 1
IS 12380 : Part 1
IS 12419 : Part 1
IS 12420 : Part 3
IS 12420 : Part 4
IS 12420 : Part 6
IS 12420 : Part 8
IS 12448 : Part 1
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 10 Free six-pin connector for various
applications, Type 11777 IS-09
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 11 Fixed six-socket connector for various
applications, Type 11777 IS-10
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 12 Free six-socket connector for various
applications, Type 11777 IS-11
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 13 Fixed six-pin connector for various
applications, Type 11777 IS-12
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 14 Free eight-pin connector for microphone
and other various applications, Type 11777 IS-13
Circular connectors for radio and associated sound
equipment for frequencies below 3 MHz including
dc: Part 15 Fixed eight-socket connector for
microphone and other applications, Type 11777 IS14
Low frequency threaded coupling circular
connectors:Part 1 Test schedule and requirements
Low frequency (Below 3 MHz including dc)
miniature, bayonet coupling circular connectors:
Part 1 Test Schedule and requirements
Dimensions of sockets for relays used in electronic
and telecommunication equip ment: Part 1 Sockets
for armature relays, Sec 1 8 Pin socket
Radio frequency connectors of N series: Part 1 Test
schedule and requirements
Radio frequency connectors of SMA, SMB and
SMC series: Part 1 Test schedule and requirements
Circular audio connectors: Part 3 Plug, Five
contacts, nonrigid Type 12420 IS-02
Circular audio connectors: Part 4 Plug five contacts,
rigid Type 12420 IS-03-R
Circular audio connectors:Part 6 Plug ten contacts,
nonrigid type 12420 IS-05-R
Circular audio connectors: Part 8 Plug ten contacts,
rigid Type 12420 IS-07-R
Basic testing procedures and measuring methods for
IS 12448 : Part 2
: Sec 1
IS 12448 : Part 2
: Sec 2
IS 12448 : Part 2
: Sec 3
IS 12448 : Part 2
: Sec 4
IS 12448 : Part 3
IS 12448 : Part 4
IS 12448 : Part 5
: Sec 1
IS 12448 : Part 5
: Sec 3
IS 12448 : Part 5
: Sec 4
IS 12448 : Part 6
IS 12448 : Part 7
IS 12448 : Part 8
IS 12448 : Part 9
IS 13984 : Part 2
electromechanical components for electronic
equipment: Part 1 General
Part 2 General examination, electrical continuity and
contact resistance tests, insulation tests & voltage
stress tests: Sec 1 General requirements
Part 2 General examination, electrical continuity and
contact resistance tests, insulation tests voltage stress
tests: Sec 2 Electrical continuity and contact
resistance tests
Part 2 General examination, electrical continuity and
contact resistance tests, insulation tests & voltage
stress tests, Sec 3 Insulation tests
Part 2 General examination, electrical continuity and
contact resistance tests, insulation tests & voltage
stress tests, Sec 4 Voltage stress tests
Basic testing procedures and measuring methods for
electromechanical components for electronic
equipment: Part 3 Current carrying capacity test
Basic testing procedures and measuring methods for
electromechanical components for electronic
equipment: Part 4 Dynamic stress tests
Part 5 Impact tests (free components), Static load
tests (forced components); endurance tests &
overload tests, Sec 1 Impact test
Part 5 Impact tests [Free components], static load
tests [fixed components], endurance tests and
overload tests, Sec 3 Endurance tests
Part 5 Impact tests [Free components], static load
tests [Fixed components], endurance tests and
overload tests, Sec 4 Overload tests
Basic testing procedures and measuring methods of
electromechanical components for electronic
equipment: Part 6 Climatic tests and soldering tests
Basic testing procedures and measuring methods for
electromechanical components for electronic
equipment: Part 7 Mechanical operating tests and
sealing tests
Basic testing procedures and measuring methods for
electromechanical components for electronic
equipment: Part 8 Connector tests
Basic testing procedures and measuring methods for
electromechanical components for electronic
equipment:Part 9 Cable-clamping tests, explosion
hazard tests,chemical resistance tests,fire hazard
tests of
Specification for Link and Test Connectors: Part 2
: Sec 1
IS 13984 : Part 2
: Sec 2
IS 13984 : Part 2
: Sec 4
IS 13984 : Part 3
: Sec 1
IS 13984 : Part 3
: Sec 2
IS 13984 : Part 3
: Sec 4
IS 13984 : Part 4
: Sec 3
IS 13984 : Part 5
: Sec 1
IS 2597 : Part 1
IS 2597 : Part 2
IS 2597 : Part 3
IS 2597 : Part 4
IS 2597 : Part 5
IS 4147
IS 5627
IS 6134 : Part 1
IS 6134 : Part 2
IS 6134 : Part 5
IS 6134 : Part 9
Socket for conventional Wiring, Sec 1 Two-way
Socket link and test Connector
Specification for link and test connectors: Part 2
Socket for conventional wiring, Sec 2 Three-way
socket link and test connector
Specification for link and test connectors: Part 2
Socket for conventional wiring, Sec 4 Six-way
socket link and test connector
Specification for link and test connectors: Part 3
Socket for mounting on printed wiring boards: Sec 1
Two-way flat mounting socket link and test
connector
Specification for link and test connectors: Part 3
Socket for mounting on printed wiring boards: Sec 2
Two-way upright mounting socket link and test
connector
Specification for link and test connectors: Part 3
Socket for mounting onprinted wiring boards: Sec 4
Four-way socket link and test connector
Specification for link and test connectors: Part 4 ULink Plug: Sec 3 Double U-Link Plug Polarized
Specification for link and test connectors: Part 5
Cord Plug: Sec 1 Polarized
Code of practice for the use of electron tubes: Part 1
Commercial receiving tubes
Code of practice for the use of electron tubes: Part 2
Special quality receiving tubes
Code of practice for the use of electron tubes: Part 3
Transmitting and industrial tubes
Code of practice for the use of electron tubes: Part 4
Cathode ray tubes
Code of practice for the use of electron tubes: Part 5
Rectifiers and thyratrons
Methods of measurements for electron tubes
receiving and transmitting tubes
Methods of measurements of radar and oscilloscope
on cathode-ray display tubes
Methods of measurement of electrical characteristics
of microwave tubes: Part 1 Common to all
microwave tubes [superseding IS 6134(Part 1/Sec 1)
and IS 6134(Part 1/Sec 2)]
Methods of measurement of electrical characteristics
of microwave tubes: Part 2 Oscillator tubes
Methods of measurement of electrical characteristics
of microwave tubes: Part 5 Parasitic noise
Methods of measurement of electrical characteristics
IS 6134 : Part 10
IS 6567
IS 7146 : Part 1
IS 10071
IS 10503
IS 3715 : Part 2
IS 4411
IS 7146 : Part 2
IS 7146 : Part 3
IS 7146 : Part 4
IS 8441
IS 9492
IS 9883
IS 13899
IS 13900
IS 3700 : Part 2
IS 3700 : Part 3
IS 3700 : Part 4
IS 3700 : Part 5
of microwave tubes: Part 9 Backward-wave
oscillator tube '0' type
Methods of measurement of electrical characteristics
of microwave tubes:Part 10 Crossed-field amplifier
tubes
Radiation protection for an X-ray tube in a
protective tube-housing,operating between 10kV and
400 kV
Methods of measurement on photosensitive devices:
part 1 Basic considerations
Methods of measurement for hot cathode gas filled
tubes
Methods of measurement of colour television picture
tubes
Letter symbols for semiconductor devices: Part 2
Diodes
Code for designation of semiconductor devices
Methods of measurement on photosensitve devices:
Part 2 Photo tubes
Methods of measurement on photosensitve devices:
Part 3 Photoconductive cells for use in the visible
spectrum
Methods of measurement on photosensitive
devices:Part 4 Photomultipliers
Methods of measurements on incidental X-radiation
from electron tubes
Methods of measurement of RF/microwave leakage
from integral circuit electron tubes
Photometric and colorimetric methods of
measurements of the light emitted by a cathode-ray
tube screen
Blank detail specification for colour picture tube
with electrostatic focussing and electromagnetic
deflection for colour television receivers
Generic specification for colour picture tube with
electrostatic focussing and electromagnetic
deflection for colour television receivers
Essential ratings and characteristics of
semiconductor devices: Part 2 Low power signal
diodes
Essential ratings and characteristics of
semiconductor devices: Part 3 Rectifier diodes
Essential ratings and characteristics of
semiconductor devices: Part 4 Low power small
signal transistors
Essential ratings and characteristics of
IS 3700 : Part 6
IS 5000 : OD 4
IS 5000 : OD 6
IS 3700 : Part 7
IS 3700 : Part 9
IS 3700 : Part 10
IS 3715 : Part 1
IS 3715 : Part 4
IS 4400 : Part 1
IS 4400 : Part 2
IS 4400 : Part 4
IS 4400 : Part 7
IS 4400 : Part 8
IS 4400 : Part 9 :
Sec 1
IS 4400 : Part 10
IS 5000 : OD 9
IS 5000 : OD 10
IS 5000 : OD 11
IS 5000 : OD 12
IS 5000 : OD 13
semiconductor devices: Part 5 Power transistors
Essential ratings and characteristics of
semiconductor devices: Part 6 Switching transistors
Dimensions of semiconductor devices: Device
outline OD 4
Dimensions of semiconductor devices: Device
outline OD 6
Essential ratings and characteristics of
semiconductor devices:Part 7 Reverse b locking
triode thyristors
Essential ratings and characteristics of
semiconductor devices:Part 9 Variable capacitance
diodes
Essential ratings and characteristics of
semiconductor devices:Part 10 Field ef fect
transistors
Letter symbols for semiconductor devices: Part 1
General aspects
Letter symbols for semiconductor devices: Part 4
Thyristors
Methods of measurements on semiconductor
devices: Part 1 General
Methods of measurements on semiconductor
devices: Part 2 Low power signal diodes
Methods of measurements on semiconductor
devices: Part 4 Transistors
Methods of measurements on semiconductor
devices: Part 7 Reverse blocking triode thyristors
Methods of measurements on semiconductor
devices: Part 8 Voltage regulator and voltage
reference diodes
Methods of measurements on semiconductor
devices: Part 9 Variables capacitance diodes, Sec 1
For operating frequencies below 300 MHz
Methods of measurements on semiconductor
devices: Part 10 Field effect transistors
Dimensions of semiconductor devices: Device
outline OD 9
Dimensions of semiconductor devices: Device
outline OD 10
Dimensions of semiconductor devices: Device
outline OD 11
Dimensions of semiconductor devices : Device
outline OD 12
Dimensions of semiconductor devices: Device
outline OD 13
IS 5000 : OD 14
IS 5000 : OD 15
IS 5000 : OD 16
IS 5000 : OD 17
IS 5000 : OD 18
IS 5000 : OD 19
IS 5000 : OD 20
IS 5000 : OD 21
IS 5000 : OD 23
IS 5000 : OD 25
IS 5000 : OD 26
IS 5000 : OD 27
IS 5000 : OD 28
IS 5000 : OD 33
IS 5000 : OD 34
IS 5000 : OD 35
IS 5000 : OD 36
IS 5000 : OD 37
IS 5000 : OD 38
IS 5000 : OD 40
IS 5000 : OD 42
IS 5000 : OD 43
IS 5000 : OD 44
Dimensions of semiconductor devices: Device
outline OD 14
Dimensions of semiconductor devices: Device
outline OD 15
Dimensions of semiconductor devices: Device
outline OD 16
Dimensions of semiconductor devices: Device
outline OD 17
Dimensions of semiconductor devices: Device
outline OD 18
Dimensions of semiconductor devices: Device
outline OD 19
Dimensions of semiconductor devices: Device
outline OD 20
Dimensions of semiconductor devices: Device
outline OD 21
Dimensions of semiconductor devices: Device
outline OD 23
Dimensions of semiconductor devices: Device
outline OD 25
Dimensions of semiconductor devices: Device
outline OD 26
Dimensions of semiconductor devices: Device
outline OD 27
Dimensions of semiconductor devices: Device
outline OD 28
Dimensions of semiconductor devices: Device
outline OD 33
Dimensions of semiconductor devices: Device
outline OD 34
Dimensions of semiconductor devices: Device
outline OD 35
Dimensions of semiconductor devices: Device
outline OD 36
Dimensions of semiconductor devices: Device
outline OD 37
Dimensions of semiconductor devices: Device
outline OD 38
Dimensions of semiconductor devices: Device
outline OD 40
Dimensions of semiconductor devices: Device
outline OD 42
Dimensions of semiconductor devices: Device
outline OD 43
Dimensions of semiconductor devices: Device
outline OD 44
IS 5000 : OD 45
IS 5000 : OD 46
IS 5000 : OD 47
IS 5001 : Part 2
IS 5469 : Part 2
IS 5469 : Part 3
IS 6553
IS 7412
IS 7440 : Part 2
IS 7440 : Part 3 :
Sec 1
IS 9596
IS 9807
IS 10087
IS 10477
IS 7440 : Part 3 :
Sec 2
IS 9414 : Part 1 :
Sec 1
IS 9414 : Part 1 :
Sec 2
IS 9414 : Part 1 :
Sec 3
IS 9414 : Part 1 :
Sec 4
IS 9501 : Part 1
IS 9501 : Part 2
Dimensions of semiconductor devices: Device
outline OD 45
Dimensions of semiconductor devices: Device
outline OD 46
Dimensions of semiconductor devices: Device
outline OD 47
Guide for preparation of drawings of semiconductor
devices and integrated circuits: Part 2 Integrated
circuits
Code of practice for the use of semiconductor
junction devices: Part 2 Diodes
Code of practice for the use of semiconductor
junction devices: Part 3 Thyristors
Environmental requirements for semiconductor
devices and integrated circuits
Life testing of semiconductor devices
Essential ratings and characteristics of analogue
integrated circuits: Part 2 Telecommunication
amplifiers (audio, video and multichannel)
Essential ratings and characteristics of analogue
integrated circuits: Part 3 Operational amplifier, Sec
1 Having two input and one output
General requirements and classification of tests for
microcircuits
Life testing of digital microcircuits
Code of practice for handling of electrostatic
sensitive devices
Environmental testing procedures for microcircuits
Essential ratings and characteristics of analogue
integrated circuits:Part 3 Operational amplifier, Sec
2 Having two input and two outputs
Detail specification for digital integrated circuits:
Part 1 Nand gate, TTL, Sec 1 Single, 8 input,
positive
Detail specification for digital integrated circuits:
Part 1 Nand gate, TTL, Sec 2 Dual 4 input, positive
Detail specification for digital integrated circuits:
Part 1 Nand gate, TTL, Sec 3 Triple 3 input, positive
Detail specification for digital integrated circuits:
Part 1 Nand gate, TTL, Sec 4 Quad 2 input, positive
Methods of measurements on electrical
characteristics of microcircuits: Part 1 Digital micro
circuits
Methods of measurements on electrical
characteristics of microcircuits: Part 2 Analogue
microcircuits
IS 9816
IS 12970 : Part 1
IS 12970 : Part 2
: Sec 1
IS 12970 : Part 2
: Sec 2
IS 13562
IS 5575 : Part 1
IS 6537
IS 12970 : Part 2
: Sec 3
IS 12970 : Part 3
: Sec 1
IS 12970 : Part 3
: Sec 2
IS 12970 : Part 3
: Sec 3
IS 12970 : Part 5
: Sec 1
IS 12970 : Part 5
: Sec 2
IS 12970 : Part 5
: Sec 3
IS 12970 : Part 5
: Sec 4
IS 12970 : Part 5
: Sec 6
IS 10184
IS 1176
General requirements and classification of tests for
semiconductor devices
Semiconductor devices - Integrated circuits: Part 1
General
Semiconductor devices - Integrated circuits : Part 2
Digital integrated circuits essential ratings and
characteristics, Sec 1 General
Semiconductor devices - Integrated circuits: Part 2
Digital integrated circuits - Essential ratings and
characteristics, Sec 2 Integrated circuits memories
Terminology related to microprocessors
Temperature control devices for quartz crystal units
Guide to the use of temperature control devices for
crystal units
Semiconductor devices - Integrated circuits: Part 2
Digital integrated circuits - Essential ratings and
characteristics,Sec 3 Integrated circuit
microprocessos
Semiconductor devices - Integrated circuits: Part 3
Digital integrated circuits - Measuring methods, Sec
1 General
Semiconductor devices - Integrated circuits: Part 3
Diigital integrated circuits - Measuring methods, Sec
2 Static characteristics
Semiconductor devices - Integrated circuits: Part 3
Digital integrated circuits - Measuring methods, Sec
3 Dynamic measurements
Semiconductor devices - Integrated circuits : Part 5
Analogue integrated circuits - Essential ratings and
characteristics, Sec 1 General Format
Semiconductor devices - Integrated circuits : Part 5
Analogue integrated circuits - Essential ratings and
characteristics, Sec 2 Operational amplifiers
Semiconductor devices - Integrated circuits: Part 5
Analogue integrated circuit - Essential ratings and
characteristics,Sec 3 Audio-amplifiers videoamplifiers and multichannel amplifiers for
Semiconductor devices - Integrated circuits: Part 5
Analogue integrated circuits - Essential ratings and
characteristics, Sec 4 R.F. and I.F. amplifiers
Semiconductor devices - Integrated circuits: Part 5
Analogue integrated circuits - Essential ratings and
characteristics, Sec 6 Analogue signal switching
circuits
Lumbered synthetic quartz crystal
Dimensions for aerial rods and slabs made of
IS 12970 : Part 6
: Sec 1
IS 12970 : Part 6
: Sec 2
IS 12970 : Part 6
: Sec 4
IS 2935
IS 4570 : Part 2
IS 4570 : Part 3
IS 4570 : Part 4
IS 4570 : Part 5
IS 4570 : Part 6
IS 4570 : Part 7
IS 4570 : Part 8
IS 4570 : Part 9
IS 6077 : Part 1
IS 6235
IS 7930
IS 4570 : Part 10
IS 4570 : Part 11
IS 4570 : Part 12
IS 4570 : Part 13
: Sec 1
IS 4570 : Part 13
ferrimagnetic materials
Semiconductor devices - Integrated circuits: Part 6
Analogue integrated circuits - Measuring method,
Sec 1 General
Semiconductor devices - Integrated circuits: Part 6
Analogue integrated circuits - Measuring method,
Sec 2 Linear amplifiers
Semiconductor devices - Integrated circuits: Part 6
Analogue integrated circuits - Measuring methods,
Sec 4 Analogue switching circuits
Guide for use of quartz crystal units for frequency
control and selection
Crystal unit holders: Part 2 Metal, solder seal, two
pin crystal unit holders types AA and AB
Crystal unit holders: Part 3 Tube type crystal unit
holders (glass) Types AP, AR, AS, AT And AU
Crystal unit holders: Part 4 Metal, solder seal, two
wire crystal unit holders Type BC and BC/1
Crystal unit holders: Part 5 Metal, solder seal, twowire crystal unit holders Types BF, BF/1 and BG,
BG/1
Crystal unit holders: Part 6 Metal, solder seal, two
pin crystal unit holder Type CX
Crystal unit holders: Part 7 Microminiature, metal,
solder seal, two-wire crystal unit holder, type DJ
Crystal unit holders: Part 8 Metal, welded, three
wire crystal unit holder Type DK
Crystal unit holders: part 9 Metal, welded, two pin
crystal unit holders Type DN
Permanent magnets: Part 1 General requirements
and tests
Dimensions of pot-cores made of magnetic oxides
and associated parts
Dimensions of toroids made of magnetic oxides or
iron powder
Crystal unit holders: Part 10 Metal, welded, twowire crystal unit holder type DP
Specification for crystal unit holders: Part 11 Metal,
welded, two-pin crystal unit holder, type DQ
Specification for crystal unit holders: Part 12
Microminiature, metal, cold-welded, two-wire
crystal unit holder type EB
Crystal unit holders: Part 13 Quartz Crystal unit
holder outline for automatic handling, Sec 1 Metal,
Sealed, two pin crystal unit holder type CU 01
Crystal unit holders: Part 13 Quartz crystal unit
: Sec 2
IS 4570 : Part 13
: Sec 3
IS 4570 : Part 13
: Sec 4
IS 4570 : Part 13
: Sec 5
IS 5575 : Part 2
IS 7410 : Part 1
IS 8899
IS 9018
IS 9709
IS 7410 : Part 2
IS 7957
IS 7962
IS 8011
IS 8271 : Part 1
IS 8271 : Part 2 :
Sec 2
IS 8271 : Part 2 :
Sec 3
IS 8271 : Part 2 :
Sec 4
IS 8271 : Part 2 :
Sec 5
holder outline for automatic handling, Sec 2 Metal,
Sealed,two pin crystal unit holder Type CU 02
Crystal unit holders: Part 13 Quartz Crystal unit
holder outline for automatic handling, Sec 3 Metal,
Sealed, two pin crystal unit holder Type CU 03
Crystal unit holders: Part 13 Quartz crystal unit
holder outline for automatic handling, Sec 4 Metal,
Sealed, two pin crystal unit holder type CU 04
Crystal unit holders: Part 13 Quartz crystal unit
holder outline for automatic handling, Sec 5 Metal,
Sealed, two pin crystal unit holder type CU 05
Temperature control devices for quartz crystal units
(heating type): Part 2 Pin connections and bases
Guide to the use of the piezoelectric filters: Part 1
Quartz crystal filters
Guide for the use of synthetic quartz crystal
General requirements and tests for quartz crystal
oscillators
Synthetic quartz single crystal
Guide to the use of the piezoelectric filters: Part 2
piezoelectric ceramic filters
Basic method for the measurement of resonance
frequency and equivalent series resistance of quartz
crystal units by zero phase technique in a .. Network
Methods of measurement for piezoelectric vibrations
operating over the frequency range upto 30 MHz
Methods for the measurement of frequency and
equivalent resistance of unwanted reasonance of
filter crystal units
Quartz crystal units used for frequency control and
selection: Part 1 General requirements and tests
[superseding IS:2916(Part 1)-1969]
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators, Sec 2
Quartz crystal unit type AA-02 [superseding
IS:2916(Part 3)-1972]
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators, Sec 3
Quartz crystal unit type AA-03 [superseding
IS:2916(Part 4)-1972
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators, Sec 4
Quartz crystal unit type AA-04 [superseding
IS:2916(Part 5)-11972]
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators,Sec 5
IS 9567
IS 9817
IS 9938
IS 10579
IS 8271 : Part 2 :
Sec 6
IS 8271 : Part 2 :
Sec 7
IS 8271 : Part 2 :
Sec 8
IS 8271 : Part 2 :
Sec 9
IS 8271 : Part 2 :
Sec 10
IS 8271 : Part 2 :
Sec 11
IS 8271 : Part 2 :
Sec 12
IS 8271 : Part 2 :
Sec 14
IS 8271 : Part 2 :
Sec 15
IS 8271 : Part 2 :
Sec 16
IS 8271 : Part 2 :
Sec 17
Quartz crystal unit type AA-05 [superseding
IS:2916(Part 6)-1972]
Tin or tin-lead coated copper wire
Sealing test for pressurized waveguide tubing and
assemblies
Recommended colours for PVC insulation for LF
wires and cables
Polyethylene (PE) insulation and sheath of
telecommunication cables
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators,Sec 6
Quartz crystal unit type AA-06 [superseding
IS:2916(Part 7)-1975]
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators, Sec 7
Quartz crystal unit type AA-07[superseding
IS:2916(Part 8)-1976]
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators, Sec 8
Quartz crystal unit type AA-08 [Superseding
IS:2916(Part 9)-1976]
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators,Sec 9
Quartz crystal unit type AA-09 [superseding
IS:2916(Part 10)-1977]
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators, Sec 10
Quartz crystal unit type AA-10
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators,Sec 11
Quartz crystal unit type AA-11
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators, Sec 12
Quartz crystal unit type AA-12
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators: Sec 14
Quartz crystal unit type AA-14
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators: Sec 15
Quartz crystal unit type AA-15
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators: Sec 16
Quartz crystal unit type AA-16
Quartz crystal units used for frequency control and
selection: Part 2 Series AA for Oscillators: Sec 17 Quartz crystal unit type AA-17
IS 8271 : Part 2 :
Sec 18
IS 8271 : Part 2 :
Sec 20
IS 8271 : Part 2 :
Sec 21
IS 8271 : Part 2 :
Sec 22
IS 8271 : Part 3 :
Sec 1
IS 8271 : Part 3 :
Sec 2
IS 8271 : Part 3 :
Sec 3
IS 8271 : Part 3 :
Sec 4
IS 8271 : Part 3 :
Sec 5
IS 8271 : Part 3 :
Sec 6
IS 8271 : Part 3 :
Sec 7
IS 8271 : Part 3 :
Sec 8
IS 8271 : Part 3 :
Sec 9
IS 8271 : Part 4 :
Sec 1
IS 8271 : Part 4 :
Sec 2
IS 8271 : Part 4 :
Quartz crystal units used for frequency control and
selection : Part 2 Series AA for Oscillators, Sec 18
Quartz crystal unit type AA-18
Quartz crystal units used of frequency control and
selection Part 2:Series AA for Oscillators, Sec 20
Quartz crystal unit type AA-20
Quartz crystal units used for frequency control and
selection - Part 2 : Series AA for Oscillators Section 21 : Quartz crystal unit type AA-21
Quartz crystal units used for frequency control and
selection:Part 2 Series AA for Oscillators, Sec 22
Quartz crystal unit type AA-22
Quartz crystal units used for frequency control and
selection: Part 3 Series BC for Oscillators, Sec 1
Quartz crystal unit type BC-01
Quartz crystal units used for frequency control and
selection: Part 3 Series BC for Oscillators, Sec 2
Quartz crystal unit type BC-02
Quartz crystal units used for frequency control and
selection : Part 3 Series BC for Oscillators, Sec 3
Quartz crystal unit type BC-03
Quartz crystal units used for frequency control and
selection:Part 3 Series BC for Oscillators,Sec 4
Quartz crystal unit type BC-04
Quartz crystal units used for frequency control and
selection: Part 3 Series BC for Oscillators,Section 5
Quartz crystal unit type BC-05
Quartz crysttal units used for frequency control and
selection: Part 3 Series BC for Oscillators, Section 6
Quartz crystal unit type BC-06
Quartz crystal units used for frequency control and
selection: Part 3 Series BC for Oscillators, Section 7
Quartz crystal unit type BC-07
Quartz crystal units used for frequency control and
selection: Part 3 Series BC for Oscillators, Section 8
Quartz crystal unit type BC-08
Quartz crystal units used for frequency control and
selection: Part 3 Series BC for Oscillators, Section 9
Quartz crystal unit type BC-09
Quartz crystal units used for frequency control and
selection: Part 4 Series AB for Oscillators, Section 1
Quartz crystal unit type AB-02
Quartz crystal units used for frequency control and
selection: Part 4 Series AB for Oscillators, Section 2
Quartz crystal unit type AB-03
Quartz crystal units used for frequency control and
Sec 4
IS 8271 : Part 5 :
Sec 1
IS 8271 : Part 5 :
Sec 2
IS 8271 : Part 5 :
Sec 3
IS 8271 : Part 5 :
Sec 4
IS 8271 : Part 5 :
Sec 5
IS 8271 : Part 5 :
Sec 6
IS 8271 : Part 5 :
Sec 7
IS 8271 : Part 5 :
Sec 8
IS 8271 : Part 5 :
Sec 9
IS 8271 : Part 5 :
Sec 15
IS 8271 : Part 5 :
Sec 17
IS 8271 : Part 6 :
Sec 1
IS 8271 : Part 6 :
Sec 2
IS 8271 : Part 6 :
Sec 3
IS 8271 : Part 6 :
Sec 4
selection: Part 4 Series AB for Oscillators,Section 4
Quartz crystal unit type AB-04
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Section 1
Quartz crystal unit type CX-01
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Section 2
Quartz crystal unit type CX-02
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Section 3
Quartz crystal unit type CX-03
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Section 4
Quartz crystal unit type CX-04
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Section 5
Quartz crystal unit type CX-05
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Section 6
Quartz crystal unit Type CX-06
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Sec 7
Quartz Crystal unit Type CX-07
Quartz crystal units used for frequency control and
selection : Part 5 Series CX for Oscillators, Section
8 Quartz crystal unit Type CX-08
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Sec 9
Quartz crystal unit Type CX-09
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Sec 15
Quartz crystal unit type CX -15
Quartz crystal units used for frequency control and
selection: Part 5 Series CX for Oscillators, Sec 17
Quartz crystal unit type CX - 17
Quartz crystal units used for frequency control and
selection: Part 6 Series BF for Oscillators, Section 1
Quartz crystal unit type BF-01
Quartz crystal units used for frequency control and
selection: Part 6 Series BF for Oscillators, Section 2
Quartz crystal unit type BF-02
Quartz crystal units used for frequency control and
selection: Part 6 Series BF for Oscillators, Section 3
Quartz crystal unit type BF-03
Quartz crystal units used for frequency control and
selection: Part 6 Series BF for Oscillators, Sec 4
IS 8271 : Part 6 :
Sec 5
IS 8271 : Part 6 :
Sec 6
IS 9728
IS 10337
IS 11014 : Part 2
IS 11014 : Part 3
IS 11014 : Part 4
IS 11013
IS 11014 : Part 1
IS 11299
IS 11334
IS 11514
IS 11519
IS 11658
IS 11880
IS 12825
IS 6297 : Part 3
IS 6297 : Part 4
IS 7416 : Part 1
IS 7416 : Part 2
Quartz crystal unit type BF-04
Quartz crystal units used for frequency control and
selection: Part 6 Series BF for Oscillators, Sec 5
Quartz crystal unit type BF-05
Quartz crystal units used for frequency control and
selection: Part 6 Series BF for Oscillators, Sec 6
Quartz crystal unit type BF-06
Phase offset method for measurement of motional
capacitance of quartz crystal units
32.768 KHz Quartz crystal units for wrist watches
and standard values
Piezoelectric ceramic materials: Part 2 Type 1 and
Type 5
Piezoelectric ceramic materials: Part 3 Types 4 and
8
Piezoelectric ceramic material: Part 4 Type 5 H
Piezoelectric ceramic elements (impact type and
squeeze type) for gas lighters
Piezoelectric ceramic materials: Part 1 General
aspects and methods of measurement
Guide for the selection and use of piezoelectric
ceramic materials and elements
Methods of measurement for piezoelectric ceramic
resonators and resonator units for frequency control
and selection
Piezoelectric ceramic cartridge for impact type
electronic gas lighters
Piezoelectric ceramic cartridge for squeeze type
electronic gas lighters
General requirements and methods of tests of
piezoelectric pressure transducers-dynamic type
Ceramic trilaminate elements used in phonograph
pick-ups, ultrasonic transducers and similar devices
Piezoelectric ceramic elements for electronic
buzzers - Specification
Transformers and inductors (power, audio, pulse and
switching) for electronic equipment: Part 3 Audio
frequency transformers and chokes superseding
IS:3289-1965 and IS:4002-1967) - (
Transformers and inductors (Power, audio, pulse and
switching) for electronic equipment: Part 4 Pulse
and switching traansformers (
Dimensions for TV ferrite components: Part 1 Cores
for deflection coil
Dimensions for TV ferrite components: Part 2
Ferrite rod for linearity control unit
IS 7416 : Part 11
IS 7430
IS 7527
IS 7416 : Part 3
IS 7416 : Part 4
IS 7416 : Part 5
IS 7416 : Part 6
IS 7416 : Part 7
IS 7416 : Part 10
IS 7416 : Part 12
IS 7489
IS 7616
IS 7687
IS 7717
IS 7934
IS 8201
IS 8644
IS 8645
IS 9229
IS 8322
IS 8426 : Part 1
IS 8426 : Part 2
Dimensions for TV ferrite components: Part 11
Balun core
Dimensions of screw cores made of ferrimagnetic
oxides
Dimensions of loudspeaker magnets
Dimensions for TV ferrite components: Part 3
Tuning magnet for linearity control unit
Dimensions for TV ferrite components: Part 4 Ring
magnet for linearity control unit
Dimensions for TV ferrite components: Part 5
Segment magnet for linearity control unit
Dimensions for TV ferrite components: Part 6 Beam
centring magnet for deflection coil
Dimensions for TV ferrite components: Part 7 Pin
cushion correction magnet for deflection coil
Dimensions for TV ferrite components: Part 10
Corner correction magnets
Dimensions for TV ferrite components: Part 12 U
core for line driver transformer
Dimensions of cross-cores (X-Cores) made of
ferromagnetic oxides and associated pots
Guide for calculation of the effective parameters of
magnetic piece parts
Methods of measurement for cores for inductors and
transformers for telecommunications
General requirements and tests for magnetic cores
for application in coincident current matrix stores
having a nominal selection ratio of 2:1 and in linear
select memory stores
Dimensions of square cores made of magnetic
oxides and associated parts
High frequency wide-band matching transformer (
LTD 8)
Strip-wound cut cores of grain oriented silicon iron
alloy
Dimensions of magnets for energy meters
Inductors for electromagnetic interference
suppression (LTD 8)
Guide for drafting of performance specifications for
cores of transformers and inductors for
telecommunication
Methods of measurements for properties of
gyromagnetic materials for use at microwave
frequencies: Part 1 Magnetization
Methods of measurements for properties of
gyromagnetic materials for use at microwave
IS 8426 : Part 3
IS 8454
IS 9187 : Part 1
IS 9187 : Part 2
IS 9187 : Part 3
IS 9187 : Part 4
IS 9333
IS 9344
IS 9653
IS 14498
IS 590
IS 2001
IS 9652
IS 9654
IS 9819 : Part 1
IS 9819 : Part 2
IS 9819 : Part 3
IS 9819 : Part 4
IS 9819 : Part 5
frequencies: Part 2 Resonance line width
Methods of measurements for properties of
gyromagnetic materials for use at microwave
frequencies: Part 3 Permittivity, apparent density
and curie temperature
Guide for drafting of performance specifications for
gyromagnetic materials for use at microwave
frequencies
Deflection coil units used with TV picture tubes:
Part 1 General requirements and tests(LTD 8)
Deflectionn coil units used with TV picture tubes:
Part 2 Type DCU 1S for 470 mm, 510 mm, 590 mm
and 610 mm TV picture tubese
Deflection coil units used with TV picture tubes:
Part 3 Type DCU1H for 470 mm, 510 mm, 590 mm
and 610 mmTV picture tubes
Deflection coil units used with TV picture tubes:
Part 4 Type DCU2S for 310 mm, and 340 mm - TV
picture tubes (LTD 8)
Methods of measurement for cylinder, tube and
screw cores of magnetic oxides
Dimensions of toroidal strip-wound cores of
magnetically soft material
Tolerances on dimensions of tubes, pins and rods of
magnetic oxides
Dimensions of EP cores made of magnetic oxides
and associated parts
Fixed paper dielectric capacitors for dc
Fixed silvered mica capacitors
Dimensions for magnetic oxide cores and associated
coil formers for use in power supplies (EC-cores)
Information on ferrite materials to be supplied by
manufacturers of transformers and inductors cores
Line output transformers used with TV Picture
tubes: Part 1 General requirements and tests (LTD 8)
Line output transformers (EHT) used with TV
picture tubes: Part 2 Type LOT1S for 470 mm, 510
mm, 590 mm and 610 mm TV picture tubes
Line output transformers (EHT) used with TV
picture tubes: Part 3 Type LOT1H for 470 mm, 510
mm, 590 mm and 610 mm TV picture tubes
Line output transformers (EHT) used with TV
picture tubes: Part 4 Type LOT2S for 310 mm and
340 mm TV picture tubbes
Line output transformers (EHT) used with TV
picture tubes: Part 5 LOT for colour picture tubes
IS 9946
IS 10076 : Part 1
IS 10230 : Part 1
IS 10320
IS 10370 : Part 1
IS 7305
IS 7748 : Part 1
IS 10370 : Part 2
IS 10370 : Part 3
IS 10488 : Part 1
IS 10488 : Part 2
IS 11296 : Part 1
IS 11296 : Part 2
IS 11296 : Part 3
IS 11392 : Part 1
: Sec 1
IS 11392 : Part 2
: Sec 1
IS 11392 : Part 2
: Sec 2
IS 8083
Tests for magnetic properties of ferrite aerial rods
[superseding IS:7431(Part 1)-1974 and IS 7431(Part
2)-1976]
Linearity control units used with TV picture tubes:
Part 1 General requirements and tests
Specification for IF, RF transformers and inductors
(coils): Part 1 General requirements and tests
(Superseding IS:1512-1969)
General requirements and tests for axial lead cores
made of magnetic oxides or iron powder
Dimensions of mounting accessories of pot cores for
wired circuits:Part 1 For pot cores of size 26 x
16(mm)
Fixed capacitors used in electronic equipment
Variable capacitors: Part 1 Tests and general
requirements
Dimensions of mounting accessories of pot cores for
wired circuits: Part 2 For pot cores of size
18x11(mm)
Dimensions of mounting accessories of pot cores for
wired circuits: Part 3 For pot cores of size
18x14(mm)
Frame output transformers used with TV picture
tubes:Part 1 General requirements and tests.
Frame output transformers used with TV picture
tubes: Part 2 Type
FOT 1H
for 470 mm, 510 mm, 590 mm and 610 mm
Method for magnetic testing of TV fferrite
components: Part 1 Flux measurement of beam
centering magnet
Method for magnetic testing of TV ferrite
components: Part 2 Flux measurement of corner
correction magnet
Method for magnetic testing of TV ferrite
components: Part 3 Flux measurement of pin
cushion correction magnet
Dimensions of mounting accessories of pot cores for
printed circuit board mountings: Part 1 For pot core
of size 18X11(mm), Sec 1 Type 1
Dimensions of mounting accessories of pot cores for
printed circuit board mountings: Part 2 For pot core
of size 26x16(mm), Sec 1 Type 1
Dimensions of Mounting accessories of pot cores for
printed circuit board mountings: Part 2 For Pot Core
of size 26 x 16 (mm), Sec 2 Type 2
Dimensions of ceramic dielectric capacitors of the
IS 8080
IS 9566
IS 11392 : Part 3
: Sec 1
IS 11455 : Part 1
: Sec 1
IS 11455 : Part 1
: Sec 2
IS 11455 : Part 1
: Sec 3
IS 11455 : Part 3
IS 11455 : Part 4
IS 11794 : Part 1
IS 11794 : Part 2
: Sec 1
IS 11794 : Part 2
: Sec 2
IS 11794 : Part 2
: Sec 3
IS 11794 : Part 2
: Sec 4
plate type
Silver coated copper wire
High tension connecting wires for use in television
receivers
Dimensions of mounting accessories of pot cores for
printed circuit board mountings: Part 3 For pot core
of size 30x19(mm), Sec 1 Type 1
Outline dimensions of transformers and inductors
for use in telecommunication and electronic
equipment: Part 1 Transformers & inductors using
YEI-1 Laminations, Sec 1 Universel mounting
Outline dimensions of transformers and inductors
for use in telecomnmunication and electronic
equipment: Part 1 Transformers & Inductors using
YEI-1 Laminations: Sec 2 U-clamp mounting
Outline dimensions of transformers and inductors
for use in telecommunication and electronic
equipment: Part 1 Transformers and inductors using
YEI-1 Laminations,Sec 3 Printed wiring board
mounting
Outline dimensions of transformers and inductors
for use in telecommunication and electronic
equipment: Part 3 Transformers and inductors using
YUI-1 Laminations
Outline dimensions of transformers & inductors for
use in telecommunication & electronic
equipment:Part 4 Transformers & inductors using Q
series of C cores
Laminations for transformers and inductors for use
in telecommunication and electronic equipment: Part
1 General requirements and tests
Laminations for transformers and inductors for use
in telecommunication and electronic equipment: Part
2 Preferred ranges of laminations,Sec 1 Lamination
Type YEI-1
Laminations for transformers and inductors for use
in telecommunication and electronic equipment: Part
2 Preferred ranges of laminations, Sec 2 Lamination
Type YEx-2
Laminations for transformers and inductors for use
in telecommunication and electronic equipment: Part
2 Preferred ranges of laminations, Sec Lamination
type YED-2
Laminations for transformers and inductors for use
in telecommunication and electronic equipment: Part
2 Preferred ranges of laminations, Sec 4 Lamination
IS 11794 : Part 2
: Sec 5
IS 11794 : Part 2
: Sec 6
IS 13310
IS 13342
IS 13388 : Part 3
IS 13412 : Part 1
IS 13412 : Part 2
IS 13413 : Part 1
IS 13674 : Part 1
IS 13674 : Part 3
IS 13898
IS 13909
IS 2786 : Part 1
IS 2786 : Part 2
IS 3671 : Part 1
IS 3723 : Part 1
IS 3723 : Part 2
type YEx-3
Laminations for transformers and inductors for use
in telecommunication and electronic equipment: Part
2 Preferred ranges of laminations, Sec 5 Lamination
type YEx-4
Laminations for transformers and inductors for use
in telecommunication and electronic equipment: Part
2 Preferred ranges of laminations, Sec 6 Lamination
type YUI-1
Dimensions of E-cores with rectangular crosssection made of magnetic oxides intended for
general applications
Dimensions of magnetic oxide cores intended for
use in power supply applications
Performance requirements and methods of test of
TV ferrite components: Part 3 Core for deflection
coil
Laminated core, package for transformers and
inductors used in telecommunication and electronic
equipment: Part 1 Dimensions
Laminated core packages for transformers and
inductors used in telecommunication and electronic
equipment: Part 2 Electrical characteristics - [IS
13412(Part 2)
Designation for cores and assemblies for
transformers and inductors for used in
telecommunication and electronic equipment: Part 1
Laminated cores
Dimensions of ferrite components for CTV: Part 1
Cores for deflection coil - [IS 13674(Part 1):
Dimensions of ferrite components for CTV: Part 3
Cores for SMPS transformers
Dimensions of Coil Formers of Transformers &
Inductors for use in Telecommunication and
electronic equipment
Dimensions for PM Cores made of magnetic oxides
and associated Parts
Specification for ceramic dielectric capacitors, type
2: Part 1 General requirements and methods of tests
Specification for ceramic dielectric capacitors, type
2: Part 2 FCCG 01 and FCCG 02 capacitors
Air dielectric variable tuning capacitors: Part 1 Tests
and general requirements
Capacitors for radio interference suppression: Part 1
General requirements and methods of tests
Capacitors for radio interference suppression : Part 2
IS 3723 : Part 3
IS 4317
IS 4633
IS 5027
IS 5475 : Part 1
IS 5475 : Part 2
IS 5475 : Part 4
IS 5786 : Part 1
IS 5786 : Part 2
IS 5786 : Part 3
IS 5786 : Part 5
IS 5786 : Part 6
IS 5786 : Part 7
IS 5786 : Part 8
IS 5786 : Part 10
IS 5786 : Part 12
IS 8186
IS 8238
IS 9470
IS 9512
IS 8507 : Part 1
IS 8507 : Part 2 :
Sec 1
Type F CRS 1
Capacitors for radio interference suppression: Part 2
Type F CRS 1
Aluminium electrolytic capacitors with non-solid
electrolytic
Fixed metallized-paper dielectric capacitors for
direct current
Method of measurement of current noise generated
in fixed resistors
Polystyrene film dielectric capacitors: Part 1 General
requirements and methods of tests
Polystyrene film dielectric capacitors: Part 2 Type F
CPS 1
Polystyrene film dielectric capacitors: Part 4 Type F
CPS 3
Fixed resistors general purpose low power: Part 1
General requirements and methods of tests
Fixed resistors general purpose low power: Part 2
Resistors Type FRLP - 1
Fixed resistors general purpose low power: Part 3
Resistors Type FRLP - 2
Fixed resistors general purpose low power: Part 5
Resistors Type FRLP - 4
Fixed resistors general purpose low power: Part 6
Resistors Type FRLP - 5
Fixed resistors general purpose low power: Part 7
Resistors Type FRLP - 6
Fixed resistors general purpose low power: Part 8
Resistors Type FRLP - 7
Fixed resistors general purpose low power: Part 10
Resistors Type FRLP - 9
Fixed resistors general purpose low power: Part 12
Resistors Type FRLP - 11
Marking codes for values and tolerance of resistors
and capacitors (superseding IS 825:1956 and IS
4114:1967)
Guide for use of variable capacitors in electronic
equipment
Method of test for the usability of resistors under
pulse conditions
Guidance for pulse testing of resistors
Fixed insulated hermetically sealed tantalum
capacitors with solid electrolyte :Part 1 General
requirements and methods of tests
Fixed insulated hermatically sealed tantalum
capacitors with solid electrolyte : Part 2 Type FCST
IS 8507 : Part 2 :
Sec 2
IS 8507 : Part 3 :
Sec 1
IS 8507 : Part 3 :
Sec 2
IS 8507 : Part 4 :
Sec 1
IS 8872 : Part 1
IS 8872 : Part 2 :
Sec 1
IS 8872 : Part 2 :
Sec 2
IS 8872 : Part 2 :
Sec 3
IS 8872 : Part 2 :
Sec 4
IS 8872 : Part 2 :
Sec 5
IS 12071
IS 12284
IS 5026
IS 8872 : Part 2 :
Sec 6
IS 8872 : Part 3 :
Sec 1
IS 8872 : Part 3 :
Sec 2
IS 8872 : Part 4 :
Sec 1
IS 8872 : Part 4 :
Sec 2
IS 8872 : Part 4 :
Sec 3
IS 8872 : Part 4 :
Sec 4
IS 8872 : Part 4 :
Sec 5
1, Sec 1 Polar
Fixed insulated hermetically sealed tantalum
capacitors with solid electrolyte :Part 2 Type FCST
1, Sec 2 Non-polar
Fixed insulated hermetically sealed tantalum
capacitors with soild electrolyte :Part 3 Type FCST
2, Sec 1 Polar
Fixed insulated hermetically sealed tantalum
capacitors with solid electrolyte :Part 3 Type FCST
2, Sec 2 Non-polar
Fixed insulated hermetically sealed tantalum
capacitors with solid electrolyte :Part 4 Type FCST
3, Sec 1 Polar
Variable resistors: Part 1 General requirements and
methods of tests (superseding IS 2934(Part 1):1964
Variable resistors: Part 2 General purpose, Sec 1
Type VRG 1C
Variable resistors: Part 2 General purpose, Sec 2
Type VRG 2C
Variable resistors: Part 2 General purpose, Sec 3
Type VRG 3C
Variable resistors: Part 2 General purpose, Sec 4
Type VRG 4P
Variable resistors: Part 2 General purpose, Sec 5
Type VRG 5C
Guide for assembly of printed boards
Specificatiion for prepreg for use in multilayer
printed boards
General requirements and tests for radio frequency
cables
Variable resistors: Part 2 General purpose, Sec 6
Type VRG 6C
Variable resistors: Part 3 Precision, Sec 1 Type
VRG 1P
Variable resistors: Part 3 Precision, Sec 2 Type
VRP 2P
Varriable resistors: Part 4 Preset, Sec 1 Type
VRT 1P
Variable resistors: Part 4 Preset, Sec 2 Type
VRT 2P
Variable resistors: Part 4 Preset, Sec 3 Type
VRT 3
Variable resistors: Part 4 Preset, Sec 4 Type
VRT 4
Variable resistors: Part 4 Preset, Sec 5 Type
VRT 5
IS 8909 : Part 1
IS 8909 : Part 2
IS 8909 : Part 3
IS 8909 : Part 5
IS 9256 : Part 1
IS 9256 : Part 2
IS 9256 : Part 3
IS 9437 : Part 1
IS 9437 : Part 2
IS 9437 : Part 3
IS 9437 : Part 4
IS 9593 : Part 1
IS 10249 : Part 1
IS 13504
IS 10424
IS 11214
IS 9614 : Part 1
IS 9614 : Part 2
IS 9614 : Part 3
IS 9638 : Part 1
IS 9638 : Part 2
IS 9638 : Part 3
IS 9638 : Part 4
Fiixed resistors , general purpose, power: Part 1
General requirements and methods of tests
Fixed resistors, general purpose, power: Part 2 Type
FRP 1
Fixed resistors, general purpose, power: Part 3 Type
FRP 2
Variable resistors, general purpose, power: Part 5
Type
ERP 4
Fixed metallized polyester film dielectric capacitors:
Part 1 General requirements and methods of tests
Fixed metallized polyester film dielectric capacitors:
Part 2 Type F
CPM 2
Fixed metallized polyester film dielectric capacitors:
Part 3 Type F
CPM 2
Fixed precision resistors: Part 1 General
requirements and methods of tests
Fixed precision resistors: Part 2 Type F
RPR 1
Fixed precision resistors: Part 3 Type F
RPR 2
Fixed precision resistors: Part 4 Type F
RPR 3
Plastic film dielectric variable tuning capacitors
grade 2 : Part 1 Tests and general requirements
Voltage dependent resistors
Method of measurement of non-linearity in resistors
Guide for design and use of printed boards
Guide for repair of printed wiring boards
Fixed high-meg resistors: Part 1 Type F
RHM 1
Fixed high-meg resistors: Part 2 Type F
RHM 2
Fixed high-meg resistors: Part 3 Type F
RHM 3
Fixed polyester film dielectric capacitors for direct
current :Part 1 General requirements and methods of
tests (superseding IS:5361-1969)
Fixed polyester film dielectric capacitors for direct
current: Part 2 Type F
CPE
1
Fixed polyester film dielectric capacitors for direct
current: Part 3 Type F
CPE
2
Fixed polyester film dielectric capacitors for direct
current: Part 4 Type F
CPE
3
IS 10249 : Part 2
: Sec 1
IS 10249 : Part 2
: Sec 2
IS 10825 : Part 1
IS 10825 : Part 2
IS 10825 : Part 3
IS 10991 : Part 1
IS 11515 : Part 1
IS 11515 : Part 2
IS 11515 : Part 3
IS 11534 : Part 1
IS 13554
IS 5921 : Part 1
IS 5921 : Part 2
IS 5921 : Part 3
IS 5921 : Part 4
IS 5921 : Part 5
Voltage dependent resistors (varistors): Part 2 Low
voltage, Sec 1
VDF 1
Voltage dependent resistors (varistors): Part 2 Low
voltage, Sec 2
VDS 1
Specification for ceramic dielectric capacitors type
1: Part 1 General requirements and methods of tests
(superseding IS:1980-1967)
Specification for ceramic dielectric capacitors type
1: Part 2 F
CCT 1
Specification for ceramic dielectric capacitors type
1: Part 3 F
CCT 2
Fixed metallized polypropylene film dielectric
capacitors :Part 1 General requirements and methods
of tests
Fixed metallized polycarbonate film dielectric
capacitors: Part 1 General requirements and methods
of tests
Fixed metallized polycarbonate film dielectric
capacitors :Part 2 Type F
CCM 1
Fixed metallized polycarbonate film dielectric
capacitors :Part 3 Type F
CCM 2
Specification for directly heated positive step
function temperature co-efficient thermistors: Part 1
General requirements and methods of tests
Measurement of the dimensions of a cylindrical
component having two axial terminations
Metal-clad base materials for printed circuits for use
in electronic and telecommunication equipment: Part
1 General requirements and test [Second revision]
Metal-clad base materials for printed circuits for use
in electronic and telecommunication equipment: Part
2 Paper phenolic copper clad laminated sheet - PFCP-Cu economic grade
Metal-clad base materials for printed circuits for use
in electronic and telecommunication equipment: Part
3 Phenolic Cellulose Paper Copper-clad laminated
sheet - PF-CP-Cu High electric grade
Metal-clad base materials for printed circuits for use
in electronic and telecommunication equipment:Part
4 Phenolic cellulose paper copper-clad tarminated
sheet, of defined flammability
Metal-clad base materials for printed circuits for use
in electronic and telecommunication equipment: Part
5 Epoxide cellulose paper copper-clad laminated
IS 5921 : Part 6
IS 5921 : Part 7
IS 5921 : Part 8
IS 5921 : Part 9
IS 5921 : Part 10
IS 5921 : Part 11
IS 5921 : Part 12
IS 7405 : Part 1
IS 7405 : Part 2
IS 8943
IS 10922
IS 13669
IS 4493 : Part 1
IS 4493 : Part 2
IS 4493 : Part 3
sheet, of defined flammability
Metal-clad base materials for printed circuits for use
in electronic and telecommunication equipment: Part
6 Epoxide woven glass fabric copper-clad laminated
sheet, general purpose grade
Specification for metal-clad base materials for
printed circuits for use in electronic and
telecommunication equipment: Part 7 Epoxide
woven glass fabric copper-clad laminated sheet, of
defined flammability
Metal clad base materials for printed circuits for use
in electronic and telecommronication equipment:
Part 8 Flexible copper-clad polyester (PETP) film
Metal clad base materials for printed circuits for use
in electronic and telecommunication equipment: Part
9 Epoxide cellulose paper core, epoxide glass cloth
surface copper clad laminated sheet of defined
Metal clad base materials for printed circuits for use
in electronic and telecommunication equipment:Part
10 Epoxide non-woven/glass reinforced/woven
copper-clad laminated sheet of defined
flammability(VBT)
Metal clad base materials for printed circuits for use
in electronic and telecommunication equipment:Part
11 Thin epoxide woven glass fabric copper clad
laminated sheet, general purpose grade,for use in the
Part 12 Thin epoxide woven glass fabric copper clad
laminated sheet of defined flammability, for use in
the fabrication of multilayer printed layers
Specification for printed wiring boards: Part 1
General requirements and methods of test
Specification for printed wiring boards: Part 2 Single
and double sided printed boards with plain holes
Guide to be design and use of components intended
for mounting on boards with printed wiring and
printed circuits
Copper foil for use in the manufacture of copper
clad base materials
Permanent polymer coating materials (solder-resist)
for use in the manufacture of printed circuits Specification
Hollow metallic wave guides: Part 1 General
requirements and tests
Hollow metallic waveguides: Part 2 Ordinary rigid
rectangular waveguides
Hollow metallic waveguides: Part 3 Medium flat
IS 4493 : Part 4
IS 4493 : Part 5
IS 4493 : Part 6
IS 4493 : Part 7
IS 5608 : Part 2
IS 5608 : Part 3
IS 5608 : Part 4
IS 5608 : Part 5
IS 5608 : Part 6
IS 5662
IS 5801 : Part 1
IS 5801 : Part 2
IS 5801 : Part 3
IS 5802 : Part 2
IS 9941
IS 10738 : Part 1
IS 10738 : Part 2
: Sec 1
IS 11295
IS 12598
IS 10738 : Part 2
rigid rectangular waveguides
Hollow metallic waveguides: Part 4 Flat rigid
rectangular waveguides
Hollow metallic waveguides:Part 5 Rigid
rectangular waveguides with circular outside crosssection
Hollow metallic waveguides:Part 6 Rigid square
waveguides
Hollow metallic waveguides:Part 7 Circular
waveguides
LF wires and cables with PVC insulation and PVC
sheath: Part 2 Equipment Wires, single
LF wires and cables with PVC insulation and PVC
sheath: Part 3 Equipment wires and cables, screened
LF Wires and cables with PVC insulation and PVC
sheath: Part 4 Cables for indoor installations
LF Wires and cables with PVC insulation and PVC
sheath: Part 5 Signalling cables
LF Wires and cables with PVC insulation and PVC
sheath:Part 6 Jumper Wires
TV Aerial Feeder Cables
DEC 91)
Flexible coaxial radio frequency cables with
characteristic impedance 50 ohms Part 1 Cables
Type 50-3-1
Flexible coaxial radio frequency cables with
characteristic impedance 50 ohms Part 2 Cable Type
50-3-2
Flexible coaxial radio frequency cables with
characteristic impedance 50 ohms:Part 3 Cable Type
50-7-1
Flexible coaxial radio frequency cables with
characteristics impedance 75 ohms:Part 2 Cable
Type 75-7-2
Guide to calculation of resistance of plain and tinned
copper conductors of low frequency cables and
wires
Flanges for waveguides: Part 1 General
requirements and tests
Flanges for waveguides: Part 2 Flanges for ordinary
rectangular waveguides, Sec 1 General (
JAN 91)
General purpose waveguide directional couplers
Thermoplastic cables for communication,
instrumentation and control
Flanges for waveguides: Part 2 Flanges for ordinary
: Sec 3
IS 10738 : Part 2
: Sec 5
IS 10738 : Part 2
: Sec 6
IS 10738 : Part 3
: Sec 1
IS 10738 : Part 3
: Sec 2
IS 10738 : Part 4
: Sec 1
IS 10738 : Part 4
: Sec 2
IS 10738 : Part 5
: Sec 1
IS 10738 : Part 5
: Sec 2
IS 10738 : Part 5
: Sec 3
IS 10738 : Part 6
: Sec 1
IS 13176
IS 13873
IS 14438
IS 11892
IS 11967 : Part 1
: Sec 1
IS 11967 : Part 1
: Sec 2
IS 11967 : Part 1
: Sec 3
IS 11967 : Part 1
: Sec 4
IS 11967 : Part 1
: Sec 5
IS 11967 : Part 2
: Sec 1
IS 11967 : Part 3
: Sec 1
IS 11967 : Part 3
rectangular waveguides, Sec 3 Flange Type B (
DEC 90)
Flanges for waveguides: Part 2 Flanges for ordinary
rectangular waveguides, Sec 5 Flange Type D
Flanges for waveguides: Part 2 Flanges for ordinary
rectangular waveguides, Sec 6 Flange type E
Flanges for waveguides: Part 3 Flanges for flat
rectangular waveguides, Sec 1 General
Flanges for waveguides:Part 3 Flanges for flat
rectangular waveguides, Sec 2 Flange type G
Flanges for waveguides: Part 4 Flanges for circular
waveguides , Sec 1 General
Flanges for waveguides: Part 4 Flanges for circular
waveguides, Sec 2 Flange type J
Flanges for waveguides: Part 5 Flanges for medium
flat rectangular waveguides, Sec 1 General
Flanges for waveguides: Part 5 Flanges for medium
flat rectangular waveguides, Sec 2 Flange type L
Flanges for waveguides: Part 5 Flanges for medium
flat rectangular waveguides, Sec 3 Flange type N
Flanges for waveguides: Part 6 Flanges for square
waveguides, Sec 1 Flanges for waveguides:Part 6
Flanges for square waveguides, Sec 2 Flange type K
PVC insulation and sheath of telecommunication
cables
Specification for rigid waveguide assemblies
Audio cords and cordages for telecommunication
specification
Method of calculation of maximum external
diameter of cables for indoor installations
RF Coaxial cables: Part 1 Solid Polyethylene,
Section 1 Flexible Type R50-2-A01
RF Coaxial Cables: Part 1 Solid Polyethylene,
Section 2 Flexible Type R50-3-A02
RF Coaxial Cables: Part 1 Solid Polyethylene,
Section 3 Flexible Type R50-3-A03
RF Coaxial Cables: Part 1 Solid Polyethylene,
Section 4 Flexible Type R50-7-A04
RF Coaxial Cables: Part 1 Solid Polyethylene,
Section 5 Flexible Type R50-7-A05
RF Coaxial cables: Part 2 Polyethylene (Semisolid)cables, Section 1 Type R 75-5-B100
Radio frequency coaxial cables: Part 3 Solid
extruded/Tape wrapped PTFE, Section 1 Flexible,
Type R50-2-F01
Radio frequency coaxial cables: Part 3 Solid
: Sec 2
IS 11967 : Part 3
: Sec 3
IS 11967 : Part 3
: Sec 4
IS 11967 : Part 3
: Sec 5
IS 3397
IS 10662
IS 11453
IS 13246
IS 14131 : Part 1
IS 14131 : Part 2
IS 14450 : Part 1
IS 14493 : Part 1
IS 14686 : Part 1
IS 14686 : Part 2
: Sec 1
IS 615
IS 616
IS 4545 : Part 1
IS 4545 : Part 3
extruded/Tape wrapped PTFE, Section 2 Flexible,
Type R50-3-F02
Radio frequency coaxial cables:Part 3 Solid
extruded/Tape Wrapped PTFE, Section 3 Flexible,
Type R50-3-F03
Radio frequency flexible coaxial cables:Part 3 Solid
extruded/Tape wrapped PTFE,Section 4
Flexible,Type R75-2-F04
Radio frequency flexible coaxial cables: Part 3 Solid
extruded/Tape wrapped PTFE, Section 5 Flexible,
R75-4-F05
Community radio receivers (superseding IS:7061955)
Receivers for colour television broadcast
transmission
Characteristics of systems for monochrome and
colour television
Guide for choosing modular dimensions for
waveguide components
Radio frequency cables: Part 1 General requirements
and tests for single-unit coaxial cables for use in
cabled distribution systems
Radio frequency cables: Part 2 Particular
requirements for single-unit coaxial cables for use in
cabled distribution system
Conductors in electronic applications: Part 1 Bare
copper round
Multicore and symmetrical pair/quad cables for
digital communications Part 1 Generic Specification
Generic specification for Radio frequency and
Coaxial cable assemblies : Part 1 General
requirements and test methods
Radio frequency and coaxial cable assemblies: Part
2 Sectional specification for flexible coaxial cable
assemblies, Section 1 General
Radio receivers for amplitude modulation broadcast
transmission - Specification
Safety requirements for mains operated electronic
and related apparatus for household and similar
general use
Methods of measurement on receivers for television
broadcast transmissions: Part 1 General
considerations
Methods of measurement on receivers for television
broadcast transmissions: Part 3 Geometrical
properties of the picture
IS 4547
IS 9031
IS 9870
IS 9887
IS 4545 : Part 4
IS 4545 : Part 5
IS 4545 : Part 6
IS 4545 : Part 7
IS 4545 : Part 8
IS 4545 : Part 9
IS 4545 : Part 11
IS 6759
IS 9793 : Part 1 :
Sec 1
IS 9793 : Part 2 :
Sec 1
IS 10425 : Part 2
IS 10437
IS 10557
IS 10485
IS 10820 : Part 1
IS 10820 : Part 2
Receivers for monochrome television broadcast
transmission
Teleprinter paper page rolls
Informative guide for subjective tests on TV
receivers
Guidance on subjective listening tests
Methods of measurement on receivers for television
broadcast transmissions: Part 4 Synchronizing
quality
Methods of measurement on receivers for television
broadcast transmissions: Part 5 Sensitivity
Methods of measurement on receivers for television
broadcast transmissions: Part 6 Selectivity and
response to undesired signals
Methods of measurement on receivers for television
broadcast transmissions: Part 7 Fidelity
Methods of measurement on receivers for television
broadcast transmissions:Part8 Compatibility with
audio visual recording equipment
Methods of measurement on receivers for television
broadcast transmissions: Part 9 Electrical and
acoustic measurements at audio frequencies
Methods of measurement on receivers for television
broadcast transmissions: Part 11 Measurement under
conditions different from broadcast signal standards
Radio receivers for frequency modulation broadcast
transmission - Specification
Antennas for the reception of sound and television
broadcasting in the frequency range 30 MHz to 1
GHz : Part 1 Methods of measurement, Sec 1
Electrical & mechanical characteristics
Antennas for the reception of sound and television
broadcasting in the frequencyrange 30MHz to 1
Ghz: Part 2 Requirements Sec 1 Guide for the
preparation of aerial performance specification
Multichannel TV tuners: Part 2 Electronic tuners
Safety requirements for radio transmitting
equipment
Teleprinter paper tape rolls
Code of practice for the installation of single and
community antenna systems for the reception of
sound and television broadcasting
Methods of measurement for radio equipment used
in mobile services: Part 1 General definitions and
conditions of measurement
Methods of measurement for radio equipment used
IS 10820 : Part 5
IS 10820 : Part 6
IS 10853 : Part 1
IS 10853 : Part 2
IS 10853 : Part 3
IS 10853 : Part 4
IS 11728
IS 12193 : Part 1
IS 12236
IS 13215
IS 13409
IS 12193 : Part 2
IS 12193 : Part 3
IS 12274
IS 13420 : Part 1
IS 13696
IS 13986 : Part 1
IS 13986 : Part 2
in the mobile services: Part 2 Transmitters
employing A3E, F3E or G3E emissions
Methods of measurement for radio equipment used
in the mobile services: Part 5 Receivers employing
single side-band techniques [ R3E,H3E OR J3E]
Methods of measurement for radio equipment used
in the mobile services: Part 6 Selective calling and
data equipment
Methods of measurement for radio transmitters: Part
1 General conditions of measurement
Methods of measurement for radio transmitters: Part
2 Frequency
Methods of measurement for radio transmitters: Part
3 Output power and power consumption
Methods of measurement for Radio Transmitters:
Part 4 Performance characterististics for FM sound
Broadcasting
Code for installation space including connections for
car radio for front installation
Methods of measurement for radio receivers for
various classes of emission: Part 1 General
considerations and methods of measurements
including audio frequency measurement
Paper page rolls for adding machines/calculators
Specification for portable/personal transreceivers
Specification for high frequency transreceivers
Methods of measurement on radio receivers for
various classes of emission: Part 2 Radio frequency
measurements on receivers for amplitude modulated
sound broadcast emissions
Methods of measurement on radio receivers for
various classes of emissions: Part 3 Radio frequency
measurements on receivers for frequency modulated
sound broadcasting emissions
Safety requirements for electronic flash apparatus
for photographic purposes
Cabled distribution systems:Part 1 Systems
primarily intended for sound and television signals
operating between 30 MHz and 1 GHz
Interconnection of radio and TV receivers
Methods of measurement on receivers for satellite
broadcast transmissions in the 12 GHz band : Part 1
Radio frequency measurements on outdoor units
Methods of measurement on receivers for satellite
broadcast transmissions in the 12 GHz band: Part 2
Electrical measurements on DBS tuner units
IS 13987 : Part 1
IS 13987 : Part 2
IS 14230
IS 14264
IS 14265
IS 4330
IS 14231 : Part 1
IS 14231 : Part 3
IS 14231 : Part 4
IS 14231 : Part 5
IS 2320
IS 2321
IS 3437
IS 3886
IS 3915
IS 6700
IS 6756
IS 6767 : Part 1
IS 6767 : Part 2
IS 8290
IS 9281 : Part 1
Methods of measurements on Receiving antennas
for satellite broadcast transmission in the 12 GHz
band, Part 1 Electrical measurements on DBS
receiving antennas
Methods of measurement on receiving antennas for
satellite transmission :Part 2 Mechanical and
environmental measurements on DBS receiving
antennas
C-Band parabolic Dish Antenna - Specification
Satellite signal distribution on cabled distribution
system
Satellite receivers - Specificiation
Methods of measurements on cathode ray
oscilloscope (DC to 10 MHz)
Cabled distribution systems for television and sound
signals: Part 1 Safety requirements
Cabled distribution systems for television and sound
signals: Part 3 Active coaxial wideband distribution
components
Cabled distribution systems for television and sound
signals: Part 4 Passive coaxial wideband distribution
components
Cabled distribution systems for television and sound
signals: Part 5 Headend
Methods of measurements for amplitude modulated
frequency signal generators (30 kHz to 30 MHz)
Requirements for general purpose amplitude
modulated radio frequency signal generators (30
kHz to 30 MHz)
General requirements for direct reading pointer
indicator type electronic voltmeter
Minimum requirements for general purpose audio
frequency signal generators (30 Hz to 30 kHz)
Methods of measurements on audio frequency signal
generators (30 Hz to 30 kHz)
Requirements for general purpose cathode-ray
oscilloscope
Technical documentation to be supplied with
electronic measuring equipment
Direct reading pointer indicator type ac/dc electronic
voltmeter: Part 1 Methods of measurements
Direct reading pointer indicator type ac/dc electronic
voltmeter: Part 2 Up to 30 MHz
General purpose audio frequency output power
meters
Electronic weighing systems: Part 1 Terms and
IS 9281 : Part 3
IS 9298 : Part 1
IS 6767 : Part 3
IS 6769 : Part 1
IS 6769 : Part 2
IS 8573
IS 9176
IS 9177
IS 9281 : Part 2
IS 9281 : Part 4
IS 9285 : Part 1
IS 9285 : Part 2
IS 9298 : Part 2
IS 9711
IS 9741 : Part 1
IS 9741 : Part 2
IS 9782
IS 9858
IS 10656
IS 11017
IS 10211 : Part 1
IS 10211 : Part 2
IS 10767 : Part 1
IS 10767 : Part 2
definitions
Electronic weighing systems: Part 3 Requirements
Television pattern generators: Part 1 Requirements
Direct reading pointer indicator type ac/dc electronic
voltmeter: Part 3 Upto 300 MHz
Direct reading pointer indicator type ac electronic
millivoltmeter: Part 1 Methods of measurements
Direct reading pointer indicator type ac electronic
millivoltmeter: Part 2 With a frequency range of 2
Hz to 1 MHz
Digital electronic dc voltmeters and dc electronic
analogue-to-digital converters
Method for specifying the functional performance of
the electronic measuring equipment
Method for specifying the functional performance of
stabilized power supply apparatus
Electronic weighing systems: Part 2 Methods of
measurements
Electronic weighing systems: Part 4 Code of practice
for use and installation
Direct reading pointer indicator type ac electronic
RF millivoltmeter: Part 1 Methods of measurements
Direct reading pointer indicator type ac electronic
RF millivoltmeter: Part 2 Requirements
Television pattern generators: Part 2 Methods of
measurements
Synchronizing pulse generator
Video test signal generator: Part 1 Methods of
measurements
Video test signal generator: Part 2 Requirements
Television sweep generators
Safety requirements for electronic measuring
apparatus
Insulation resistance tester (Electronic type)
Expression of properties of sampling oscilloscopes
Standard signal generator in the frequency range (30
MHz - 500 MHz): Part 1 Methods of measurements
Standard signal generator in the frequency range (30
MHz - 500 MHz) : Part 2 Performance requirements
An interface system for programmable measuring
instruments (byte serial bit parallel): Part 1
Functional specifications, electrical specifications,
mechanical specifications, system applications and
An interface system for programmable measuring
instruments (byte serial bit parallel): Part 2 Code and
format conventions
IS 11018 : Part 1
IS 11018 : Part 2
IS 11051
IS 11148
IS 11547 : Part 2
IS 11547 : Part 3
: Sec 1
IS 11547 : Part 3
: Sec 2
IS 12126
IS 12350
IS 12705
IS 12957
IS 14527
IS 13673 : Part 1
IS 13673 : Part 2
IS 13673 : Part 3
IS 13875 : Part 1
IS 13875 : Part 2
IS 13875 : Part 3
IS 14132
IS 14189
IS 14501 : Part 1
IS 14501 : Part 2
IS 6842
Expression of properties of cathode-ray
oscilloscopes: Part 1 General
Expression of properties of cathode-ray
oscilloscopes: Part 2 Storage oscilloscopes
Methods of measurement for television sweep
generators
Expression of the properties of spectrum analyzers
Electronic weighing in-motion systems: Part 2
Requirements
Electronic weighing in-motion systems: Part 3
Methods of tests, Sec 1 Simulted tests
Electronic weighing in-motion systems: Part 3
Methods of tests, Sec 2 Site tests
Hand held metal detectors (frisking) for use in
weapons detection
Expression of the properties of logic analyzers
Expression of performance of air quality infrared
analyzers
Expression of performance of sample handling
system for fluids
Expression of the performance of pulse generators
Expression of performance of electrochemical
analyzers: Part 1 General
Expression of performance of electrochemical
analyzers: Part 2 pH value
Expression of performance of electrochemical
analyzers: Part 3 Electrolytic conductivity
Digital measuring instruments for measurement &
control: Part 1 General specifications concerning
terms, tests & data sheet details
Digital measuring instruments for measurement &
control: Part 2 Terms, tests & data sheet details of
instruments for measuring analog quantities
Digital measuring instruments for measurement &
control: Part 3 Terms, tests & data sheet details of
instruments for measuring digital quantities
Walk through metal detectors for use in weapons
detection - Doc: LTD 21(1046)F
Expression of the properties of frequency counters
(Upto a frequency of 1 GHz) - Doc: LTD 21(1121)F
Pulse techniques and apparatus Part 1 Pulse terms
and definitions
Pulse techniques and apparatus Part 2 Pulse
measurement and analysis, general considerations
Limits for electromagnetic Interference Specification
IS 6873 : Part 1
IS 9615
IS 13149
IS 6391
IS 6873 : Part 2
IS 6873 : Part 3
IS 6873 : Part 5
IS 8912
IS 10052 : Part 1
IS 10052 : Part 3
IS 10052 : Part 4
IS 10052 : Part 5
IS 10052 : Part 6
IS 7068
IS 8234
IS 9729
IS 10052 : Part 7
Methods of measurements of electromagnetic
interference: Part 1 From ignition systems of motor
vehicles and other similar devices
Guide on General Aspects of electromagnetic
interference suppression
Flickermeter : Functional and design specifications
Magnetic and ceramic phonograph pick-ups (first
revision)
Methods of measurements of electromagnetic
interference: Part 2 From household electrical
appliance portable tools and similar electrical
apparatus
Methods of measurements of electromagnetic
interference:Part 3 From sound and television
receivers
Methods of measurements of electromagnetic
interference: Part 5 From flourescent lamps and
luminaires
Methods of measurement of the suppression
characteristics of electromagnetic interference filters
Specification for electromagnetic interference
measuring apparatus and measuring methods: Part 1
Measuring apparatus of the Frequency range 10 kHz
to 1 GHz (superseding IS:6872-1972)
Specification for electromagnetic interference
measuring apparatus and measuring methods: Part 3
Radiation measurement of electromagnetic
interference
Specification for electromagnetic interference
measuring apparatus and measuring methods: Part 4
Interference measuring apparatus having detectors
other than Quasi-peak
Specification for electromagnetic interference
measuring apparatus and measuringmethods: Part 5
Statistical considerations in the determination of
limits of electromagnetic interference
Electromagnetic Interference measuring apparatus
and measurement methods: Part 6 Measurement of
the shielding efficiency of the coaxial cables having
one or two braids in the metric wavelength range
Specification for 6.25 mm calibration tape
Spools for magnetic tapes for sound recording and
reproduction
Methods of measurement of disk record playing
equipment
Electromagnetic interference measuring apparatus
IS 10564
IS 12233 : Part 1
: Sec 1
IS 12233 : Part 1
: Sec 2
IS 12233 : Part 1
: Sec 3
IS 12233 : Part 1
: Sec 4
IS 12233 : Part 1
: Sec 5
IS 12233 : Part 2
IS 10351
IS 11700
IS 8792
IS 8793
IS 8997
IS 12233 : Part 3
IS 12552
IS 12708
and measuring methods:Part 7 Audio frequency
interference measurement
Recommended practice for minimization of
electromagnetic interference from radio frequency
heating equipment
Electromagnetic interference characteristics of
overhead powerlines and high voltage equipment:
Part 1 Description of phenomena: Sec 1 Radio noise
from power lines
Electromagnetic interference characteristics of
overhead power lines and high-voltage equipment:
Part 1 Description of phenomena: Sec 2 Effects of
corona from conductors
Electromagnetic interference characteristics of
overhead power lines and high-voltage equipment:
Part 1 Description of phenomena: Sec 3 Radio noise
levels due to insulators fittings and sub-station
Electromagnetic interference characteristics of
overhead power lines and high-voltage
equipment:Part 1 Description of phenomena, Sec 4
Sparking due to bad contacts
Electromagnetic interference characteristics of
overhead power lines and high-voltage equipment:
Part 1 Description of phenomena,Sec 5 Special dc
effects
Electromagnetic interference characterstics of
overhead power lines and high voltage equipment:
Part 2 Methods of measurement and procedure for
determining limits
Spools for 25.4 mm video magnetic tape
Type B helical video recorders
Line traps for AC power system - Specification
Line traps for AC power systems - Methods of tests
Coupling devices for PLC systems
Electromagnetic interference characteristics of
overhead power lines and high voltage equipment:
Part 3 Code of practice for minimizing the
generation of radio noise
Guide on immunity requirements for the reduction
of interference caused by radio transmitters in the
frequency range 26 MHz to 30 MHz
Measurement of the immunity of sound and
television broadcast receivers and associated
equipment from radio-sources operating in the
frequency range 1.5 MHz to 30 MHz by the current
injection method
IS 12743
IS 13247 : Part 1
IS 13247 : Part 2
IS 13397
IS 13671
IS 14700 : Part 3
: Sec 2
IS 8998
IS 9482
IS 12509
IS 10315
IS 14700 : Part 3
: Sec 3
IS 3956
IS 4377
IS 4479
IS 4480 : Part 1
IS 4480 : Part 2
IS 6370
IS 7594 : Part 1
IS 7594 : Part 2
Guide on methods of measurements of short
duration transients on low voltage power and signal
lines.
Complete Filter Units for Radio Interference
Suppression: Part 1 Generic specification
Complete Filter units for Radio Interference
Suppression: Part 2 Sectional Specification Selection
of Methods of Test and General requirements
Guide for considerations on reference impedances
for use in determining the distructurbance
characteristics of household appliances and similar
electrical equipment
Guidance on the use of the substitution method for
measurements of Radiation from microwave ovens
for frequencies above 1 GHz
Electromagnetic compatibility Part 3 Limits Sec-2
Limits for harmonic current emmissions (equipment
input current
Methods of tests for coupling devices for PLC
systems
Single side band power line-carrier terminals
Test procedure for geiger-muller counters
7 bit coded character set for information interchange
Electromegnetic compatibility Part 3: Limits Sec-3
Limitations of voltage flctuations and flicker in low
voltage supply systems for equipment with rated
current
Dimensions and spools for magnetic tapes for sound
recording and reproduction
General requirements for magnetic sound tape
recording and reproducing systems (first revision)
Methods of measurement on magnetic tapes for
sound recording and reproduction (first revision)
Magnetic tapes for sound recording and
reproduction : Part 1 Domestic grade
Magnetic tapes for sound recording and
reproduction: Part 2 Professional grade (Reel-toReel) (first revision)
Mechanical and dimensional requirements of audio
tape cassettes for domestic use(first revision)
Magnetic sound tape recording and reproducing
equipment (cassette): Part 1 Methods of
measurement (revised)
Magnetic sound tape recording and reproducing
equipment (cassette):Part 2 Domestic type (first
revision)
IS 8152
IS 8655 : Part 1
IS 8655 : Part 3
IS 9272 : Part 1
IS 9305
IS 9702
IS 9272 : Part 2
IS 9551 : Part 4
IS 9551 : Part 5
IS 10700
IS 11136
IS 11361
IS 11718 : Part 1
IS 12429 : Part 1
IS 12429 : Part 2
IS 12431
IS 9528 : Part 1
IS 9528 : Part 2
IS 9859 : Part 1
IS 9859 : Part 2
IS 10706
IS 11866
IS 9859 : Part 3
Methods of measurement of speed fluctuations in
sound recording and reproducing equipment
Magnetic sound tape recording and reproducing
equipment (reel-to-reel): Part 1 Methods of
measurement
Magnetic sound tape recording and reproducing
equipment (reel-to-reel): Part 3 Professional type
Disk record playing equipment : Part 1 Record
player
Specification for processed disk records
Magnetic tape for cassettes for sound recording and
reproduction
Disk record playing equipment : Part 2 Amplifiers
and loudspeakers
High fidelity audio equipment and systems: Part 4
Record playing equipment and cartridges
High fidelity audio equipment and systems: Part 5
magnetic sound tape recording and reproducing
equipment
Methods of measurement for magnetic tapes for
video recording and reproduction
Methods of measurement for video tape recording
and reproducing equipment
Interconnection between video tape recorders and
television receivers for 50 Hz, 625 lines systems
Characteristics and methods of measurement for
audio-visual video and television equipment and
systems: Part 1 General
Time and control code for video tape recorders: Part
1 Longitudinal time code (LTC)
Time and control code for video tape recorders: Part
2 Vertical-Interval Time Code (VITC)
Helical-scan video tape cassette system using 12.65
mm magnetic tape on type VHS
Manual for planning of (SSB) PLC systems:Part 1
PLC systems
Manual for planning of(SSB)PLC systems: Part 2
PLC systems planning
Code of practice for installation and maintenance of
outdoor PLC equipment:Part 1 Line traps
Code of practice for installation and maintenance of
outdoor PLC equipment: Part 2 Coupling devices
Methods of tests for single sideband PLC terminals
Alpha, beta alpha-beta contamination meters and
monitors
Code of practice for installation & maintenance of
IS 12746 : Part 1
: Sec 1
IS 12746 : Part 1
: Sec 2
IS 12746 : Part 2
IS 12746 : Part 3
IS 12746 : Part 4
IS 12746 : Part 5
: Sec 1
IS 12746 : Part 5
: Sec 2
IS 13241 : Part 1
IS 14392
IS 11423
IS 11424
IS 11886
IS 12421
IS 11425
IS 11600
IS 11645
IS 11797
IS 11798
IS 11868
IS 11869
IS 12275
outdoor PLC equipment: Part 3 Coupling
capacitors/capacitor voltage transformers
Telecontrol equipment and systems: Part 1 General
considerations,Section 1 General principles
Telecontrol equipment and systems : Part 1 General
considerations, Section 2 Guide for specifications
Telecontrol equipment and systems:Part 2
Environmental conditions and power supplies
Telecontrol equipment and systems:Part 3 Interfaces
(Electrical Characteristics)
Telecontrol equipment and systems: Part 4
Performance requirements
Telecontrol equipment and systems : Part 5
Transmission protocols, Section 1 Transmission
frame formats
Telecontrol equipment and systems : Part 5
Transmission protocols, Sec 2 Link transmission
procedure
Code of practice for installation and maintenance of
indoor PLC equipment: Part 1 PLC terminals
General considerations for telecommunication
services for electronic power systems
Portable prospecting radiation meters with GeigerMuller counter tube (Linear scale instruments)
Portable prospecting radiation meters with gammaray scintillation detectors (Linear scale instruments)
Test methods for multichannel amplitude analyzers
Performance verification of liquid scintillation
counting systems
Test procedures for semiconductor charged particle
detectors
Index of electrical measuring apparatus used in
connection with ionizing radiation
Test procedures for amplifiers and preamplifiers for
semiconductor detectors for ionizing radiation
Radiation detectors for instrumentation and
protection of nuclear reactors
Definition of test method terms for semiconductor
radiation detectors and scintillation counting
Constructional requirements of nuclear instruments
to afford personal protection against ionizing
radiation
Hand and/or foot contamination monitors and
warping assemblies
Standard for time-to-amplitude convertors for
multichannel amplitude analyzers
IS 12761 : Part 1
IS 12761 : Part 2
IS 12761 : Part 3
IS 12761 : Part 4
IS 12771
IS 12930
IS 11416
IS 12772
IS 13883
IS 13616 : Part 2
IS 13715 : Part 1
IS 13882 : Part 1
IS 14624 : Part 2
IS 10735
IS 10737
IS 11413
IS 11414
IS 11415
IS 11713 : Part 1
IS 11713 : Part 2
IS 11713 : Part 4
IS 10680
IS 10681
IS 10934
IS 10935
Equipment for continuously monitoring radioactivity
in gaseous effluents : Part 1 General requirements
Equipment for continuously monitoring radioactivity
in gaseous effluents: Part 2 Specific requirements for
aerosal effluent monitors
Equipment for continuously monitoring radioactivity
in gaseous effluents: Part 3 Specific requirements for
noble gas effluent monitors
Equipment for continouly monitoring radioactivity
in gaseous effluents:Part 4 Specific requirements for
iodine monitors
General characteristics for nuclear reacttor
instruentation
General principles of nuclear reactor instrumentation
Basic mode control procedure complements
Application of digital computers to nuclear reactor
instrumentation and control
Thermoluminescence Dosimetry systems for
personal and environmental monitoring
Fibre optic branching devices: Part 2 Sectional
specification transmission star coupler
Fibre optic switches : Part 1 Generic specification
Optical fibre cables: Part 1 Generic specification
Safety of laser products: Part 2 Safety of optical
fibre communication system
25 Pin DTE/DCE interface connectors and pin
assignments for data communication
15 Pin DTE/DCE interface connectors and pin
assignments for data communication
Character structure for start/stop and synchronous
transmission for information processing
Basic mode control procedures for data
communication systems
Basic mode control procedures for code independent
information transfer
Guide for physical planning of computer complexes:
Part 1 Layouts
Guide for physical planning of computer complexes:
Part 2 Safety
Guide for physical planning of computer complexes:
Part 4 Services
Programming languages - FORTRAN
Programming languages - COBOL
Representations of time of the day
Representation of ordinal dates
IS 11257
IS 12285
IS 12373 : Part 2
IS 12373 : Part 3
IS 12373 : Part 4
IS 13589
IS 13615
IS 13672
IS 13675 : Part 2
IS 13706
IS 13707 : Part 1
IS 13707 : Part 2
IS 11291
IS 11403
IS 12372
IS 13868
IS 13919
IS 13109 : Part 1
IS 13109 : Part 2
Programming languages - Minimal BASIC
Start-stop transmission signal quality at DTE/DCE
interfaces
Basic reference model of open systems
interconnection for information processin g systems:
Part 2 Security architecture
Basic reference model of open systems
interconnections for information processing systems:
Part 3 Naming and addressing
Basic reference model of open systems
interconnection for information processing
systems:Part 4 Management framework
Transport service definition in open systems
interconnection for information p rocessing systems
Service definition for the association control service
element in open systems terconnection for
information processing systems
Application layer structure in open systems
interconnection for information technoclogy
Remote operations in text communication for
information processing systems : Part 2 Protocol
specification
Protocol specification for the association control
service element in open systems interconnection for
information processing systems
Reliable transfer in text communication for
information processing systems : Part 1 Model and
service definition
Reliable transfer in text communication for
information processing systems:Part 2 Protocol
specification
Code of practice for testing of computer based
systems
Information technology - Programming languages Pascal
Presentation of single-hit decision tables
Network service definition in data communications
for information processing systems
Information technology - Telecommunications and
information exchange between systems - Open
systems interconnection - Protocol for providing the
connection - Mode transport service
Specification for electronic equipment/systems for
use in coal and metaliferrous mines: Part 1
Definitions, general requirements and tests
Specification for electronic equipment/systems for
IS 13109 : Part 4
IS 13109 : Part 5
IS 13109 : Part 6
IS 13109 : Part 7
IS 13109 : Part
10 : Sec 1
IS 14430
IS 8817
IS 9306
IS 9538
IS 13109 : Part
10 : Sec 2
IS 13109 : Part
21
IS 11289
IS 11365
IS 11366
IS 12369
IS 13250
IS 13392
IS 13393
use in coal and metaliferrous mines:Part 2
Requirements for automatic telephone systems
Specification for electronic equipment/systems for
use in coal and metaliferrous mines:Part 4
Requirements for sound powered magneto telephone
systems
Specification for electronic equipment/systems for
use in coal and metaliferrous mines:Part 5
Requirements for loud hailing telephone systems
Specification for electronic equipment/systems for
use in coal and metaliferrous mines:Part 6
Requirements for leaky feeder communication
systems
Specification for electronic equipment/systems for
use in coal and metaliferrous mines:Part 7
Requirement for cage communication systems
Specification for electronic equipment/systems for
use in coal and metaliferrous mines:Part 10, Sec 1
Requirements for production monitoring systems
Guide for Pascal program coding
Keytop printed or displayed symbols for electronic
calculators
Layouts of numeric keyboard for electronic
calculators
Electronic calculators (non-programmable type)
Specification for electronic equipment/systems for
use in coal and metaliferrous mines:Part 10, Sec 2
Requirements for status monitoring systems
Specification for electronic equipment/systems for
use in coal and metaliferrous mines: Part 21
Requirements for mine environmental
telemonitoring systems
Code of practice for performance monitoring of
computer based systems
Representation of local times differentials for
information interchange
Representation of SI and other units in systems with
limited character sets for information processing
Specification for graphical Kernal system for
computer graphics
Industrial real-time FORTRAN-Application for the
control of industrial processer
Specification for program flow for processing
sequential files in terms of record groups for
information processing
Standard representation of latitude, longitude and
IS 13394
IS 13396
IS 13553
IS 13791
IS 13792
IS 13874
IS 13557 : Part 4
IS 13557 : Part 5
IS 13557 : Part 6
IS 13557 : Part
14
IS 13587
IS 14638
IS 10401
IS 10422
IS 10690
IS 10997
IS 11179
IS 11203
IS 11404 : Part 1
IS 12736
IS 13194
IS 14172
altitude for geographic point locations
Guidelines for the documentation of computer based
application systems for information processing
Database language SQL for information processing
systems - DOC
LTD
33(1579)
User documentation and cover information for
consumer software for information processing
systems
Programming languages - PL/I
Programming languages - ADA
Guide for C-Program Coding
Information processing systems-Vocubalary Part 4
Organization of data
Information processing systems-Vocabulary : Part 5
Representation of data
Information processing systems-Vocabulary : Part 6
Preparation and handling of data
Information processing systems-Vocabulary : Part
14 Reliability, maintenance and availability
Computer system configuration diagram symbols
and conventions for information processing systems
Information technology - Software product
evaluation - Quality characteristics and guidelines
for their use
8-Bit coded character set for information
interchange
Requirement and test methods for safety of data
processing equipment
Specification for unpunched paper cards used for
information processing
Specification for unpunched paper tape for
information interchange
Print specification for magnetic ink character
recognition for information processing
Coding of machine readale characters (MICR and
OCR) for information processing
Data interchange on 130 mm, single sided, 1.9
tpmm, flexible disk cartridges using two-frequency
recording: Part 1 Physical and magnetic
characteristics
Printing specifications for optical character
recognition
Indian script code for information interchange ISCII
Identification cards - Physical characteristics
IS 11404 : Part 2
IS 11405 : Part 1
IS 11405 : Part 2
IS 11407
IS 11408
IS 11410
IS 11411
IS 11412
IS 11853 : Part 1
IS 14174
IS 14441
IS 14486
IS 11853 : Part 2
IS 11853 : Part 3
IS 12326
IS 12327 : Part 1
Data interchange on 130 mm, single sided, 1.9
tpmm, flexible disk cartridges using two-frequency
recording: Part 2 Track format
Data interchange on 130 mm, double sided, 1.9
tpmm, flexible disk cartridges using modified
frequency modulation recordings: Part 1 Physical
and magnetic characteristics
Data interchange on 130 mm, double sided, 1.9
tpmm, flexible disk cartridges using modified
frequency modulation recordings: Part 2 Data
interchange on 130 mm, double sided, 1.9 tpmm,
flexible disk cartridges
Implementation of the 7-bit coded character set and
its 7-bit and 8-bit extension 9 track 12.7 mm
magnetic tape
Specification for unrecorded 12.7 mm wide 32
ftpmm
NRZ1,126 ftpmm phase
encoded and 356 ftpmm NRZ1,magnetic tape for
information processing
9 track,12.7 mm wide magnetic tape recorded at 63
rpmm, phase encoded for information processing
9 track,12.7 mm wide magnetic tape format and
recording using group coding at 246 cpmm for
information processing
Key-board for information processing using 7-bit
coded character set
Data interchange on 130 mm, double sided, 3.8
tpmm, flexible disk cartridges using modified
frequency modulation recordings: Part 1
Dimensional, Physical and magnetic characteristics
Identification cards - Financial transaction cards
Specification for keyboard
General Purpose Dot Matrix Printer - Specification
Data interchange on 130 mm, double sided, 3.8
tpmm, flexible disk cartridges using modified
frequency modulation recordings: Part 2 Track
format A
Data interchange on 130 mm, double sided, 3.8
tpmm, flexible disk cartridges using modified
frequency modulation recordings : Part 3 Track
format B
7-bit and 8-bit coded character sets - code extension
techniques
Data Interchange on 130 mm flexible disk cartridges
using modified frequency modulation recording at
13 262 ftprad on 80 tracks on each side : Part 1
IS 12327 : Part 2
IS 12327 : Part 3
IS 12755 : Part 1
IS 12755 : Part 2
IS 12877
IS 14356
IS 14357
IS 3318
IS 12878 : Part 1
IS 12878 : Part 2
IS 12922 : Part 1
IS 12922 : Part 2
IS 13384 : Part 2
IS 13737
IS 13738 : Part 1
IS 13738 : Part 2
Dimensional, physical and magnetic characteristics
Data Interchange on 130 mm double flexible disk
cartridges using modified frequency modulation
recording at 13 262 ftprad on 80 tracks on each side
: Part 2 Track format A for 77 tracks
Data interchange on 130 mm flexible disk cartridges
using modified frequency modulation recording at
13262 ftprad on 80 tracks on each side: Part 3 Track
format B for 80 tracks
Alphanumeric character sets for optical recognition:
Part 1 Character set OCR - A - Shapes and
dimensions of the printed image
Alphanumeric character sets for optical recognition:
Part 2 Character set OCR - B - Shapes and
dimensions of the printed image
Implementation of the 7-bit coded character sets and
its 7-bit and extensions on 3.81 mm magnetic tape
cassette for data interchange
Guide for protection of information resources
Code of practice for information security
management
General requirements for surgical scalpels and
knives
6.30 mm magnetic tape cartridge using GCR
recording at 394 ftpmm: Part 1 Mechanical, physical
and magnetic properties
6.30 mm magnetic tape cartridge using GCR
recording at 394 ftpmm: Part 2 Streaming mode
90 mm flexible disk cartridge using modified
frequency recording at 7958 ftprad, 5.3 on recording
at 7958 ftprad,on 80 tracks on each side : Part 1
Dimensional,physiccal and magnetic characteristic
90 mm flexible disk cartridge using modified
frequency recording at 7958 ftprad, on 80 tracks on
each side : Part 2 Track format
Cathode-ray tube based data display monitor : Part 2
Monochrome
Information Technology - 130 mm Rewritable
optical disk cartridges for information interchange
Data interchange on 90 mm flexible disk cartridges
using modified frequency modulation recording at
15 916 ftprad, on 80 tracks on each side: Part 1
Dimensional, physical and magnetic characteristicss
Information processing systems - Data interchange
on 90 mm flexible disk cartridges using modified
frequency modulation recording at 15 916 ftprad, on
IS 14147 : Part 1
IS 14147 : Part 3
IS 3319
IS 3320
IS 4245
IS 14147 : Part 4
IS 14147 : Part 5
IS 14173
IS 14175
IS 14176
IS 14202 : Part 1
IS 14202 : Part 2
IS 11713 : Part 3
IS 3642 : Part 1
IS 3643
IS 3644
IS 3645
IS 3759
IS 3767
IS 3787
IS 4085
IS 4089
IS 4244
IS 4282
IS 4490
80 tracks on each side: Part 2 Track format
Identification cards - Recording technique: Part 1
Embossing
Identification cards - Recording technique: Part 3
Location of embossed characters on ID-1 cards
Blades, surgical, detachable(Bard Parker type) and
handles
Surgical scalpels
Needle holder (Gillies) combined with scissors, for
plastic surgery
Identification cards - Recording technique: Part 4
Location of read-only Magnetic track - Track 1 & 2
Identification cards - Recording technique: Part 5
Location of read-write magnetic track - Tracks 3
Identification cards - Numbering system and
registration procedure for issue identifiers
Information processing - Volume and file structure
of flexible disk cartridges for information
interchange
Information processing - Volume and file structure
of CD-ROM for information interchange
Identification cards - Integrated circuit(s) - Cards
with contacts: Part 1 Physical characteristics
Identification cards - Integrated circuit(s) - Cards
with contacts: Part 2 Dimensions and location of the
contacts
Guide for physical planning of computer complexes:
Part 3 Security consideration
Surgical instruments - Part 1: Non-cutting
articulated instruments
Surgical instruments - Dissecting forceps (serrated
and toothed) - Shapes and dimensions
Surgical instruments - Artery forceps Halsted's
Mosquito pattern - Shape and dimensions
Surgical instruments - Artery forceps Spencer Wells
pattern - Size, shape and dimensions
Blades, skin grafting
Hook, skin Gillies pattern
Gag, mouth cleft palate
Knives, amputating
Forceps, clip removing, Michel pattern
Retractors, skin, double ended
Surgical instruments - Dissecting, forceps, plastic
surgery - Shape and dimensions
Forceps, dilating, Trousseau's
IS 4513
IS 4587
IS 5738
IS 5750
IS 6434
IS 6435
IS 6437
IS 6989
IS 6990
IS 6996
IS 7350
IS 7387
IS 7388
IS 7501
IS 7502
IS 7507
IS 7521
IS 7522
IS 7531
IS 7561
IS 7566
IS 7628
IS 7665
IS 7892
IS 7912
IS 7579
IS 7870
IS 7893
IS 7980
IS 7994
IS 8031
IS 8040
IS 8253
IS 8340
IS 8341
Scissors, surgical dressing and stitch
Raspatories, cleft palate, for plastic surgery
Cystoscope
Sigmoidoscope
Bow, harelip traction (Denis Browne's pattern)
Strippers, Tendon
Strippers, Fascia
Chisel, post-mortem
Knife, brain post-mortem
Knife Cartilage
Needles, spin
Needles, biopsy, liver, Silverman's pattern
Surgical instruments - Forceps,tissue,Allis pattern Shape, size and dimensions
Speculum,rectal, Kelly's pattern
Clamp, intestine, Kocher's pattern
Forceps, stone, bladder
Dissector,Kocher's pattern
Retractor,abdominal, Morris pattern
Methods for testing of corrosion resistance of
stainless steel surgical instruments
Surgical instruments - Forceps, Gallstone,
Desjardin's pattern - Shape and dimensions
Surgical instruments - Forceps,spring clip
compressing,Michel's pattern - Shape and
dimensions
Clamp,stomach, Moynihan's pattern
Clamp intestine, crushing, lever action,Payer's
pattern
Retractor, double and single, blunt hooks
Scoop, Stanley Boyd's pattern
Surgical instruments - Forceps,intestine holding,
Denis Browne's pattern - Shape and dimensions
Surgical instruments - Needle,holder,Mayo-Hegar's
and Crile-Wood's Patterns - Shape and dimensions
Surgical instruments - Forceps, towel, Backhaus's
pattern - Shape. size and dimensions
Handle of skin grafting blade
Needle holder,Barron's pattern
Dissector,Watson,Cheyne's pattern
Surgical instruments - Artery, forceps,Kocher's
pattern - Shape and dimensions
Lever,bone, Bristow's pattern
Needle,aneurism, Syme's pattern
Retractor, goitre, Joll's pattern
IS 8372
IS 8377
IS 8424
IS 8583
IS 8584
IS 8585
IS 8586
IS 8853
IS 8854
IS 8855
IS 8889
IS 8965
IS 9144
IS 9145
IS 9146
IS 9149
IS 9150
IS 9165 : Part 1
IS 9165 : Part 2
IS 9183
IS 9184
IS 9416
IS 9649
IS 9650
IS 9651
IS 9689
IS 10383
IS 10384
IS 10414
IS 10445
IS 10599
IS 10637
IS 10638
IS 10984
IS 10985
IS 11043
Retractor, alae, Kilner's pattern
Bougie, Lister's and clutton's patterns
Gag, mouth, Lane's pattern
Surgical instruments - Gall duct dilators, Bake's
pattern
Surgical instruments - Peritonium, forceps,
Babcock's pattern - Shapes, sizes and dimensions
Bougie, oesophageal
Suction tube, Poole's Pattern
Retractor, cheek
Retractor,Czerny's pattern
Retractor, Langenbeck's pattern
Surgical instruments - Forceps, stone, kidney,
Randal's pattern - Shape and dimensions
Retractor, Deaver's pattern
Director and guide,Cairn's pattern
Dilator, rectal, Hegar's pattern
Scissors,dissecting, straight and curved on flat,
Mayo's pattern
Probe, with eye
Cylinder, Dermabraison plastic surgery
Surgical instruments - Needles, suture Part 1
Specification
Surgical instruments - Needles, suture Part 2 Eyed
needles - Sizes, shapes and dimensions
Suction tube, Magill's pattern
Forceps, disimpaction,maxillary, for plastic surgery
Bladder Sound
Introducer, catheter, urethral
Hook, Joseph's pattern
Clamp, intestine holding, Schoemaker's
Microtome knives
Scissors, nail, curved on flat
Scissors, bandage, Smith's pattern
Scissors, bowel
Scissors, bandage and clothing, angle to side
Surgical instruments - Needle holder, Hegar's
pattern - Sizes, shapes and dimensions
Surgical instruments - Forceps, spinter, Arthur's
pattern Shape and dimensions
Forceps, sponge holding, Foersters pattern,smooth
and serrated jaws
Scissors, dissecting, curved on flat,Pott's pattern
Needles,acupuncture
Needle, epidural
IS 11497
IS 11640 : Part 1
IS 11640 : Part 2
IS 11640 : Part 3
IS 11502
IS 11545
IS 11558
IS 11595
IS 11640 : Part 4
IS 11640 : Part 5
IS 11640 : Part 6
IS 11640 : Part 7
IS 12103
IS 12815
IS 12822
IS 12841 : Part 1
IS 12841 : Part 2
IS 12841 : Part 3
IS 12841 : Part 4
IS 13127
IS 5089
IS 5090
IS 5170
IS 5171
IS 5393
IS 13198
IS 5347 : Part 1
IS 5347 : Part 2
Catheter, Foley's,rubber,for prolonged urinary
drainage
Retractor, general surgery : Part 1 Schonborn's
pattern
Retractor, general surgery : Part 2 Kocher's pattern
Retractor, general surgery : Part 3 Israel's pattern
Surgical instruments - Forceps, tissue,AdsonBrown's pattern - Shape and dimensions
Surgical instruments - Haemostatic, forceps, Adson's
pattern - Shape and dimensions
Surgical instruments - vessel, forceps,Debakey's
pattern - Sizes, shape and dimensions
Surgical instruments - Peritoneum, forceps,
McKulicz's pattern - Shape and dimensions
Retractor, : Part 4 Abdominal Fritsch's pattern
Retractor, general surgery: Part 5 Korte Pattern
Retractor, general surgery: Part 6 Volkmann's
pattern
Retractor, general surgery: Part 7 Abdominal and
liver, curved, Mikulicz's pattern
Skin graft expander
Surgical instruments-knife, autopsy
Surgical instruments - Forceps, intestinal, Mayo
Robson's pattern
Surgical instruments - Needle holders: Part 1
Mathieu's pattern
Surgical instruments - Needle holders: Part 2 With
carbide inserts, Stratte's pattern
Surgical Instruments - Needle holders: Part 3
Heaney's pattern
Surgical Instruments - Needle holders: Part 4 With
carbide inserts, DeBakey's pattern
Suture clip applying forceps, type wachenfeld Shape dimensions and mass
Blade plate, Blount type
Blade plate, Moore type
Bone plate Sherman type
Bone plate, kessel, osteotomy
Screws, bone
Surgical instruments - Trocar holding forceps, vogel
type - Shape, dimensions and mass
Requirements for orthopaedic implants Part 1
General requirements
Requirements for orthopaedic Implants Part 2
Wrought stainless steel
IS 5347 : Part 3
IS 5347 : Part 4
IS 5347 : Part 5
IS 5347 : Part 6
IS 5347 : Part 7
IS 5347 : Part 8
IS 5347 : Part 12
IS 5347 : Part 13
IS 5347 : Part 14
IS 5394
IS 5574
IS 5580
IS 5581
IS 5583
IS 5347 : Part 15
IS 5395 : Part 1
IS 5585
IS 5589
IS 5803
IS 5846
IS 5847
IS 5848
IS 6187
IS 6233
IS 6252
IS 6281
IS 6289
IS 6319
IS 6371
Requirements for orthopaedic implants Part 3
Unalloyed titanium
Requirements for orthopaedic implants Part 4
Wrought titanium 6-aluminium 4- vanadium alloy
Requirements for orthopaedic implants Part 5
Cobalt-chromium-molybdenum casting alloy
Requirements for orthopaedic implants Part 6
Wrought-cobalt-chromium tungsten-nickel alloy
Requirements for orthopaedic implants Part 7
Wrought cobalt-nickel chromium-molybdenum alloy
Requirements for orthopaedic implants Part 8
Forgeable and cold-formed-cobalt-chromium-nickelmolybdenum-iron alloy
Requirements for orthopaedic implants Part 12
Wrought cobalt-nickel-chromium molybdenum
tungsten iron alloy
Requirements for orthopaedic implants Part 13
Wrought high nitrogen stainless steel
Requirements for orthopaedic implants Part 14
Wrought titanium 5-aluminium 2,5-iron alloy
Prostheses, hip
Forceps, wire cutting, compound action, orthopaedic
Chisels, Stille pattern, orthopaedic
Stirrup, Bohler's
Osteotomes, Stille, pattern, orthopaedic
Requirements for orthopaedic implants Part 15
Wrought titanium 6-aluminium 7-niobium alloy
Surgical implants - Intramedullary nailing systems
for bone surgery - Part 1 Intramedullary nails with
cloverleaf or V-shaped cross-section
Mallet, rubber-capped
Saw handle, bone amputation, orthopaedic
Twist drill used in orthopaedic surgery
Nails, bone (Smith-Peterson and Watson Jones
pattern)
Pin chuck for introducing Steinman pins
Steinmann pins
Saw-wire (Gigli pattern)
Forceps, bone cutting (Stille Liston pattern)
Scissors, bandage;, Lister's pattern
Awl, bone
Staple, epiphyseal, orthopaedic
Clamp, bone Lowman type
Forceps, bone holding Lane's Lane-Fagge's and
Fergusson's patterns
IS 6484
IS 6485
IS 6486
IS 6501
IS 6785
IS 6787
IS 6790
IS 6975
IS 6976
IS 6982
IS 7055
IS 6801 : Part 1
IS 6801 : Part 2
IS 7102
IS 7105 : Part 2
IS 7106
IS 7107
IS 7108
IS 7109
IS 7110
IS 7111
IS 7398
IS 7435
IS 7442
IS 7629
IS 7650
IS 7701
IS 7817
IS 7818
IS 7819
IS 7841
IS 7846
IS 8261 : Part 1
IS 8261 : Part 2
IS 8326
IS 8332
IS 8261 : Part 3
IS 8261 : Part 4
Forceps, gouge, orthopaedic, Fergusson's pattern
Forceps, gouge, angular orthopaedic
Forceps, gouge, orthopaedic, Lane's pattern
Forceps, gouge, orthopaedic, Stille Luer's pattern
Plate, bone, wain Wright, Osteotomy
Plate, bone, Mclaughlin
Plate, bone, intertrochanteric, Thornton type
Reamer, trochanteric, orthopaedic
Awl, kuntscher, diamod pointed
Gouge for intramedullary
Drivers, Kuntscher nail, orthopaedic
Drive connections for orthopaedic instruments Part 1
Keys for use with screws with haxagonal socket
heads
Drive connections for orthopaedic instruments Part 2
Screw drivers for single slot head screws, screws
with cruciate slot and cross recessed head screws
Screw, bone, Leinbach , medullary
Extractor for kuntscher nail Part 2: Striker type
Extractor, staple orthopaedic
Punch, staple orthopaedic
Hammer for Kuntscher nail extractor
Starter, staple orthopaedic
Pins, rush intramedullary
Inserter, staple orthopaedic
Forceps, bone holding, Farabeuf's pattern
Rongeur, Ruskin's pattern
Forceps, bone cutting, straight and angular liston's
pattern
Bender, plate orthopaedic
Drill, hand, bone, universal, Micro and Kirschner
Plates, bone, spinal, Meuring Williams
Impactor, for hip prostheses
Broach, Moore type, for hip prostheses
Mallet, nylon headed, orthopaedic
Compression plate, Muller type
Extractor for hip prosthesis
Pins and wires skeletal traction Part 1: Kirschner
wires
Pins and wires skeletal traction Part 2: Guide wires
Starter, Smith Petterson Nail, orthopaedic
Handle, saw Gigli
Pins and wires skeletal traction Part 3 Pins and wires
fixation and threaded
Pins and wires skeletal traction Part 4: Material and
IS 8609
IS 8641
IS 8755
IS 8921
IS 8922
IS 8926
IS 9265
IS 9829 : Part 1
IS 9829 : Part 2
IS 10121 : Part 1
IS 10121 : Part 2
IS 10128
IS 10154
IS 10155
IS 10159
IS 10326
IS 10327
IS 10338
IS 10349
IS 10235 : Part 1
IS 10235 : Part 2
IS 10235 : Part 3
IS 10727
IS 10728
IS 10729
IS 10730
IS 11034
IS 11088
IS 11567 : Part 1
mechanical requirements
Nail hip Jewett type for orthopaedic use
Acrylic resin cement for orthopaedic implants
Method for testing for biological compatibility of
metals for surgical implants
Augar extraction, Judet's pattern
Depth gauge, for orthopaedic use
Bone skid, Murphy Lane's pattern
Clamps, compression Muller's pattern
Implants for surgery - Metal bone screws Part 1
With hexagonal drive spherical under surface of
head, asymmetrical thread - Dimensions
Implants for surgery - Metal bone screws Part 2
With conical under-surface head - Dimensions
Metal bone screws- mechanical requirements and
methods of test Part 1 Screws with assymetrical
thread, variable fitting (spherical stainless steel
Metal bone screws- mechanical requirements and
methods of test Part 2 Screws with asymmetrical
thread, constant fitting (spherical)stainless
Pin,Knowles
Blade, plate, osteotomy, wainwright-Hammond's
pattern
Blade, plate Femoral, lower
Nail, supracondylar, Jewett's pattern
Spreader, plaster cast,Henning's pattern
Bender, plaster, Bohler's pattern
Saw, plaster
Rasp, for hip prosthesis
Glossary of terms in orthopadic Part 1: General
medical terms for surgical implants
Glossary of terms in orthopaedics Part 2: Mechanics
and materials for implants
Glossary of terms in orthopaedics Part 3:
Orthopaedic surgery
Nail, square Ulna
Nail, square, radius
Nail, set, Kuntscher
Osteotome, Whitchurch, Howell's pattern
Implants for surgery - Guidance on care and
handling of orthopaedic implants
Guide for retrieval and analysis of metallic
orthopaedic implants
Holes and slots in metal bone plates Part 1
Corresponding to screws with asymmetrical thread
IS 11567 : Part 3
IS 11567 : Part 4
IS 11568
IS 11953
IS 12165
IS 12375 : Part 1
IS 13423
IS 5829
IS 5906
IS 6112
IS 12375 : Part 2
IS 12375 : Part 3
IS 12375 : Part 9
IS 12376 : Part 1
IS 14227
IS 14228
IS 14229
IS 14240
IS 6114
IS 6115
IS 6373
IS 6499
IS 6505
and spherical under surfaces
Holes and slots in metal bone plates Part 3
Corresponding to screws with asymmetrical thread
and conical under-surfaces
Holes and slots in metal bone plates Part 4
Corresponding to screws with asymmetrical thread
and conical under-surfaces
Forceps, bone holding,Semb's pattern
Driver and bender for rush intramedullary pin
Basic requirements for orthopaedic Joint Prostheses
Partial and total hip joint prostheses Part 1
Classification, Designation of Dimensions and
requirements
Good manufacturing practices for orthopaedic
implants
Sound, uterine
Speculum, vaginal (Cusco's pattern)
Speculum, vaginal,double-ended (Sim's pattern)
Partial and total hip joint prostheses Part 2 Bearing
surfaces made of metallic and plastic materials
Partial and total hip joint prostheses Part 3
Determination of endurance properties of stemmed
femorel components without application of torsion
Implants for surgery - Partial and total hip joint
prostheses Part 9 Determination of resistance to
torque of head fixation of stemmed femoral
components
Implants for surgery - Femoral tibial components for
partial and total knee joiint prostheses Part 1
Classifcation, definitions and designation of
dimensions
Implants for surgery - Fixation devices for use in the
ends of the femur in adults
Implants for surgery - Staples with parallel legs for
orthopaedic use - General requirements
Implants for surgery - Determination of bending
strength and stiffness of bone plates
Orthopaedic implants - General requirements for
marking packaging and labelling
Gynaecological instruments - Forceps, uterine
vulsellum - Shape and dimensions
Gynaecological instruments - Forceps, uterine
tenaculum - Shape and dimensions
Sucker, mucus
Curette, uterine , double-ended, sharp, Sim's pattern
Curette, uterine, double-ended, sharp and blunt,
IS 6510
IS 6565
IS 6578
IS 6584
IS 6589
IS 6957
IS 6958
IS 6959
IS 6960
IS 6986
IS 6999
IS 7080 : Part 1
IS 7080 : Part 2
IS 7100
IS 7103
IS 7115
IS 7116
IS 7117
IS 7432
IS 7433
IS 7475
IS 7480
IS 7484
IS 7725
IS 7735
IS 7736
IS 7737
IS 7981 : Part 3
IS 8313
IS 8458
IS 7964
IS 7981 : Part 1
IS 7981 : Part 2
Sim's pattern
Curette, endometrial biopsy, suction type
Stethoscope (foetoscope) for foetal heart sounds,
Pinard's pattern
Obstetric Instruments - Forceps,, ovum - Shape and
dimensions
Dilators, uterine, single-ended, Hegar's pattern
Gynaecological Instruments - Forceps, uterine,
dressing, Bozemann's pattern - Shape and
dimensions
Curette, blunt, uterine
Knife,decapitation
Scissors, embryotomy, curved on flat
Catheters, metal,female
Forceps, cranioclast and cephalotribe combined
Cannula, artificial insemination
MTP Suction Apparatus Part 1 Manually operated
MTP Suction Apparatus Part 2 Electric-cummanually operated
Hook, decapitation,Jardine's pattern
Scissors, episiotomy
Apparatus, tubal patency
Forceps, midwifery,short
Scissors, umbilical cord
Clamp, myomectomy ,Bonney's pattern
Obstetrics Instruments - Forceps, round ligament,
Bonney's pattern - Shape and dimensions
Obstetrics Instruments - Clamp, vaginal, angled Shape and dimensions
Perforator, Simpson's pattern
Retractor, vaginal, Purandare's pattern
Hook, IUCD, Shirodkar's pattern
Forceps, spong holding - Shape and dimensions
Screw, myoma
Forceps, punch, cervical biopsy
Instruments, tuboplasty, Part 3 Guide, Shirodkar's
pattern
Cannula, flexible, Karman type
Manipulators, uterine, Dr Purandare's pattern
Obstetric Instruments - Forceps, Caesarean section,
haemostasis, Green-Armytage pattern - Shape and
dimensions
Instruments, tuboplasty, Part 1 Occluder,cervical,
Shirodkar's Pattern
Instruments, tuboplasty, Part 2 Cannula, Shirodkar's
IS 7981 : Part 4
IS 7981 : Part 5
IS 8314
IS 8342
IS 8459
IS 9756
IS 10156
IS 10545
IS 10546
IS 12256
IS 12270
IS 12271
IS 12418 : Part 1
IS 12418 : Part 2
IS 13009
IS 3758
IS 3760
IS 3788
IS 3799
IS 12418 : Part 3
IS 12418 : Part 4
IS 3807
IS 4489
IS 4504
IS 4514
IS 4520
IS 4959
IS 4994
IS 5140
IS 5338
IS 5357
IS 5412
pattern
Instruments, tuboplasty, Part 4 Probe, single-ended,
Shirodkar's pattern
Instruments, tuboplasty, Part 5 Probe, doubleended,Shirodkar's pattern
Forceps, midwifery, modified Kedarnath Das's
pattern, without axis traction
Forceps, midwifery, modified Kedarnath Das's
pattern, with axis traction
Manstrual regulation syringe
Cups,vaccum extraction
Cannula, intra-uterine, hysterosalpingography
Gynaecological and obstetric instruments - Clamp,
curved on flat, Heaney's pattern - Shape and
dimensions
Forceps, uterus holding, hysteroleb, Dartigies
pattern
Curette, uterine biopsy, angled
Cannula, Spackmann's pattern
Laparascopic trocar and cannula
Intra-uterine Contraceptive devices Part 1 General
requirements
Intra uterine contraceptive devices Part 2
Determination of breaking force
Contraceptive devices - Tubal ring - Specification
Hooks, aural
Probe, aural, Jobson Horne's pattern
Specula, aural
Forceps, aural and nasal, crocodile action
Intra uterine contraceptive devices Part 3 Packaging
and labelling
Intra-uterine contraceptive devices - Specification
Part 4 Copper-T(200 B)
Forceps, dressing, aural and nasal
Forceps, nasal turbinate, Luc's
Forceps, peritonsillar
Forceps, tonsil dissecting (Waugh's pattern)
Forceps, punch, nasal
Raspatory, nasal, Howrath's
Forceps, redressing, Walsham's right, left and
straightening
Auriscope
Catheter, eustachian
Metallic ear syringe
Saws, nasal, Joseph's pattern
IS 5720
IS 5723
IS 5732
IS 5747
IS 6463
IS 6464
IS 6465
IS 6470
IS 6514
IS 7007
IS 7282
IS 7710
IS 7711
IS 7712
IS 7713
IS 7756
IS 8093
IS 8094
IS 8128
IS 8136
IS 8157
IS 8191
IS 8199
IS 8315
IS 8316
IS 8327
IS 8343
IS 8344
IS 8734
IS 8735
IS 8743
IS 8825
IS 8837
IS 8838
IS 8839
IS 8840
IS 9014
IS 9015
Retractor, mastoid, self-retaining (Mollison's
pattern)
Mallet with fluted handle for ENT surgery
Gouge, mastoid (Jenkin's pattern)
Retractor, endaural (Lempert's pattern)
Burs, antrum (Tilley's pattern)
Tuning forks (Gardiner Brown's pattern)
Trocar, antral, with cannula (Tilley Lichtwitz
pattern)
Politzerization apparatus (Pritchard's pattern)
Nasal cartilage knife (Ballenger' pattern )
E.E.N.T. (Eye, Ear, Nose and Throat) diagnostic set
Chisel, labyrinth, straight (Lake's pattern)
Snare, tonsil, Eve's pattern
Curette, adenoid, Beckmann's pattern
Curette, adenoid, St. Clair Thomson's Pattern
Retractor, light model, Weislander's pattern
Depressor, tongue, Lack's pattern
Curette, Ballance's pattern
Hook, cerumen, Cawthorne's pattern
Elevator, Farabeuf's pattern
Seeker, Dundas Grant's pattern
Forceps, granulation, Heath's pattern
Retractor, pillar, anterior and tonsil enucleator,
Mollison's pattern
Tracheostomy tubes, Fuller's pattern
Forceps, redressing, Asch's pattern
Retractor, Hajek's pattern
Forceps, nodule, vocal, Chevalier Jackson's pattern
Forceps, biopsy, Paterson's pattern
Snare, aural, Glegg's pattern
Forceps, cutting and removing large specimens,
Chevaliar Jackson's pattern
Tube, suction, Yankauer's pattern
ENT surgery instruments - Forceps, direct
bronchoscopy, with alligator jaws and tenaculum
points, Irwin Moore's pattern - Specification
Cannula, suction, irrigation with locking device,
microlaryngeal
Suction tubes, with stylet, microlaryngeal surgery
Forceps, cup straight, microlaryngeal surgery
Forceps, cup upwards, microlaryngeal surgery
Scissors, microlaryngeal surgery
Raspatory, fine, curved right, Zoellner's pattern
Raspatory, fine, curved left, Zoellner's pattern
IS 9016
IS 9017
IS 9058
IS 9059
IS 9060
IS 9479
IS 9480
IS 9526
IS 9544
IS 9558
IS 9564
IS 9718
IS 10272
IS 10308
IS 10344
IS 10725
IS 10726
IS 10786
IS 10846
IS 11318
IS 11319
IS 12901
IS 12911
IS 13169
IS 4569 : Part 1
IS 4569 : Part 3
IS 4569 : Part 6
IS 13179
IS 4569 : Part 2
IS 4788
IS 4789
IS 4790
IS 5110
IS 5226
Needle, fine, spear pointed, curved right, Zoellner's
pattern
Needle, fine, spear pointed, curved left, Zoellner's
pattern
Knife, upward cutting, Zoellner's pattern
Knife, downward cutting, Zoellner's pattern
Hook, small, Zoellner's pattern
Hook, fenestra, 25 deg, 45 deg and 90 deg angle,
ear, Shea's pattern
Elevators, left and right ear, Shea's pattern
Scissors, stapedectomy, crocodile jaw
Forceps, stapedectomy, round cup, elongated cup,
and oval cup jaws
Gauge, depth, PTFE (teflon) piston
Forceps, stapedectomy, serrated, smooth and Mc
Gee wire closing jaws
Jig, cutting, PTFE piston
Draffin suspension apparatus
Tracheostomy tubes and guides, Cubley's pattern
Gag frame, Davis-Boyle and tongue plates
Knife, myringotomy
Knife, meatal skin incision
Mirror, rhinoscopic, St. Clair Thomson's pattern
Speculum, nasal, Killian's pattern
Bronchoscope, aspirating, Negus pattern
Oesophagoscope, Negus pattern
ENT surgery instruments - Laryngeal forceps, oval
cup
ENT surgery instruments - Laryngeal fine grasping
forceps, crocodile jaws, straight
ENT surgery instruments - Head mirror Specification
Scissors, eye Part 1 Corneal
Scissors, eye Part 3 Scissors, tenotomy
Scissors, eye Part 6: Scissors, Iris
ENT surgery instruments - Tracheostomy tubes,
Chevaliar Jackson's pattern - Specification
Scissors, eye Part 2 Conjuctival, blunt and sharp
point scissors
Knife ,eye, capsulotomy(Ziegler's pattern)
Knife,eye, cataract (Graefe's pattern)
Knife, eye, corneal splitting (Lang's & Tooke's
patterns)
Corneal loupe
Eye surgery instruments - Forceps, eye, corneo-
IS 5231
IS 5233
IS 5234
IS 5367
IS 5668
IS 5678
IS 5721
IS 5722
IS 6420
IS 6472
IS 6473
IS 7006
IS 7757
IS 7758
IS 7762
IS 7767
IS 7783
IS 7786
IS 8106
IS 8109
IS 8158
IS 8163
IS 8181
IS 8257
IS 8260 : Part 1
IS 8260 : Part 2
IS 8771
IS 8772
IS 8773
IS 8774
scleral disc, Elliot's pattern - (Modified)Specification
Eye surgery instruments - Forceps, eye tarsal cyst,
Green's pattern (modified) - Specifcation
Eye surgery instruments - Forceps, eye, intracapsular, arruga's and Elschnig's pattern (Modified) Specification
Eye surgery instruments - Forceps, eye,extra
capsule, Couper's pattern (modified) - Specification
Forceps, eye,strabismus, for advancement (Prince's
& Worth's patterns)
Eye surgery instruments - Forceps, eye dissecting,
serrated, fine - Specification
Forceps, eye, conjectival, suture (Moorfield's
pattern)
Forceps, eye,peripheral iridectomy (Sinclair's
pattern)
Hook, eye, Iris (Tyrell's pattern)
Eye surgery instruments - Retractor, eye, Lachrymal
sac Muller's pattern (modified) - Specification
General requirements for tinted opthalmic glass
Trial spectacle lens sets
Visual acuity test charts
Cystotome, eye, Moorfield's pattern
Curette, eye, evacuation, Moorfield's pattern
Hook, eyelid
Spatula, eye, cyclodiaysis, Sinclair's pattern
General requirements for handles, instruments,eyesurgery
Retractor, eyelid, Desmarre's pattern
Needle holder, eye,Kalt's pattern
Needle holder, eye, Castroviejo's pattern
Needle,eye, discission, Bowman's pattern
Knife, keratome, eye, Jaeger's pattern
Repositor, Iris
Ophthalmoscope
Glossary of terms relating to ophthalmic lenses and
spectacle frames Part 1 Ophthalmic lenses
Glossary of terms relating to ophthalmic lenses and
spectacle frames Part 2 Spectacle frames
Needle holder, eye, scissors and forceps combined,
Castroviejo's pattern modified
Needle holder, eye, Barraquer's pattern modified
Dissector, lacrimal Sac, Lang's pattern modified
Punch Cormenscleral, Holth's pattern modified
IS 8810
IS 9061
IS 9062
IS 9134
IS 9173
IS 9318
IS 9329
IS 9378
IS 9626
IS 9688
IS 9982
IS 9983
IS 9984
IS 10009
IS 10045
IS 10058
IS 10389
IS 10390
IS 10395
IS 10408
IS 10696
IS 10847
IS 10848
IS 10849
IS 11244
IS 12947
IS 13767
IS 13903
IS 13928
IS 14323
IS 6395
IS 6436
IS 6466
IS 6468
IS 6778
Rougine for lacrimal sac, Rollet's pattern modified
Dilator, punctum , Wilder's pattern
Probes,lacrimal, Bowman's pattern
Trephine, corneal, Castroviejo's pattern
Ratinoscope-self luminous type
Knife, eye, cataract, sliding in handle
Speculum, eye,Clark's pattern
Speculum, eye,Castroviejo's pattern
Calipers, Castroviejo's pattern (Modified)
Eye Surgery Instruments - Hook,strabismus Specification
Knife, Keratome, Castroviejo's pattern
Wire vectis and lens expressor, eye
Cannula, air injection, eye
Breaker and holder, razor blade,Barraquer's pattern
Punch, lacrimal bone, Beyer's pattern
Forceps, fixation,Graef's pattern modified
Fixation hook, eye, Guthrie's pattern
Muscle hook
Scleral hook, eye, Stallard's pattern
Spatula, eye, Green's pattern
Round segment fused bifocal blanks
Speculum with screw adjustment,eye, right &
left,Arruga's pattern
Irrigator anterior chamber, eye, Bishop Harmann's
pattern
Cystotome and currette, eye,Moorfield's pattern
Trephine, bone lacrimal,with handle
Eye surgery instruments - Tonometers Specification
Optics - Optical instruments - Contact lenses Vocabulary and symbols
Soft contact lenses - Requirements
Rigid contact lenses - Requirements
Intra ocular lenses - Specification
Thoracic surgery instruments - Clamps, auricle,
Crafoord's pattern
Thoracic surgery instruments - Spreader, Rib,
Finochietto's pattern adult size
Thoracic and Cardiovascular instruments - Needle
holders
Thoracic surgery instruments - Trocar, empyema,
Nelson's Pattern
Thoracic surgery instruments - Forceps, lung,
Duval's pattern
IS 6442
IS 6467
IS 6777
IS 6779
IS 6780
IS 7345
IS 7346
IS 7355
IS 7367
IS 7379
IS 7382
IS 7399
IS 7434
IS 7971
IS 7972
IS 8317
IS 8335
IS 8345
IS 8409
IS 8549
IS 8890
IS 9928
IS 9950
IS 9951
IS 9987
IS 10540
IS 10541
IS 11566
IS 13878
Thoracic surgery instruments - Shears, Rib, Tudor
Edward's pattern,for posterior end of ribs
Thoracic surgery instruments - Periosteotome, Rib,
Alexander's pattern
Thoracic and cardiovascular surgery instruments Forceps, dissecting, lung
Thoracic surgery instruments - Forceps, dissecting
and ligature, Mixter's pattern
Thoracic surgery instruments - Forceps, artery,
Robert's pattern,curved on flat
Cardiovascular surgery instruments - Anastomosis
forceps and clamps - Patterns, shapes and
dimensions
Raspatories, rib,Semb's Pattern
Spreader, rib, Tuffier's pattern, adult size
Clamp, coarctation, Pott's pattern, straight and
angular
Clamp, patent ductus, Potts' pattern, straight and
angular
Shears,rib, Price Thomas'pattern
Knife, sternum, Lebsche's pattern
Retractor, scapula, Tudor Edward's pattern
Tourniquet, cardiovascular, Rumel-Belmont's
pattern
Scissors, dissecting, Metzenbaum's pattern
Clamp, vasular, angled at 45 degree - Shape and
dimensions
Clamps, auricle, Satinsky pattern- sizes, shapes and
dimensions
Cardiovascular surgery instruments - Clamps,
bulldog, cross action type - Specification
Dilators, valve, Tubb's Mitral pattern
Scissors, angled,Potts Smith pattern
Clamps, bronchus - Types, shapes and dimensions
Clamp, arotic, De Bakey's pattern (spoon shaped
angled jaw)
Clamp, vascular, Wister pattern
Scissors, blunt end, Nelson pattern
Clamps, multipurpose, De Bakey's pattern
Clamp, atrial appendage, Glover's pattern - Shape
and dimensions
Clamps, vena cava, Satinsky pattern - Shape, size
and dimensions
Valve retractors
Extra corporeal circuit for haemodialysers,
IS 13924
IS 13940
IS 8174
IS 8175
IS 8176
IS 8334
IS 8380
IS 8695
IS 8696
IS 8799
IS 9041
IS 9072
IS 9073
IS 9074
IS 9408
IS 9410 : Part 1
IS 9410 : Part 2
IS 9410 : Part 3
IS 9903
IS 9904
IS 9911
IS 9914
IS 9933
IS 10157
IS 10172
IS 10174
IS 10183
IS 10676
IS 10677
IS 10765
IS 13141
IS 13175
IS 13180
IS 14139
IS 14219
haemofilters and haemoconcentrators
Cardiovascular implants - Cardiac valve prostheses
Cardiovascular surgery instruments - Clamp,
bulldog, ring handle, DeBakey's pattern - Shape and
dimensions
Neurosurgical instruments - Forceps, artery, Dandy's
pattern - Shape and dimensions
Forceps, artery, straight,curved on flat and curved on
side, Hugh Cairn's pattern
Dissectors, Penfield's pattern
Rongeur, cranial,Dahlgren's pattern
Rongeur, double-action, Olivecrona's pattern
Forceps, dressing, bayonet shape,Cushing's pattern
Guide, saw, De Martel's pattern
Rongeur, Kerrison
Elevator periosteal
Rongeur, pituitary
Neuro-suction tubes
Raney clips and clip applicator
Retractor, self retaining
Silver clip set Part 1 Forceps, clip cutting and
forming
Silver clip set Part 2 Forceps, clip applying
Silver clip set Part 3 Rack, clip
Brace, skull
Hooks, dural
Cannula, brain
Calipers, ice tong,Cone's pattern
Retractor, brain,malleable
Percussor, neurological, Magill's pattern
Burs and perforators for drill brace
Tong, skull traction, Crutchfield's pattern
Retractor, deep, self-retaining, laminectomy
Spatula, brain, double-ended, malleable,
Olivecrona's pattern
Rongeur, intervertebral disc
Forceps, dissecting, toothed and bayonet
shaped,Cushing's pattern
Leksell's rongeur
Neurosurgery needle holder
Scoville's trephine
Neurosurgical implants - Self closing intracranial
aneurysm clips
Neurosurgical implants - Sterile, single-use
hydrocephalus shunts and
IS 14679
IS 3875
IS 3876
IS 3877
IS 3878
IS 3879
IS 3887
IS 3888
IS 3889
IS 4313
IS 3890 : Part 1
IS 3890 : Part 2
IS 4314
IS 4315
IS 4316
IS 4319 : Part 2
IS 4679
IS 4680
IS 4714
IS 4715
IS 4716
IS 4975
IS 4976
IS 4977
IS 5004
IS 5005
IS 5017
IS 5023
IS 5181
IS 5185
IS 5211
IS 5212
IS 5217
IS 5178
ISO 7197 : 1989
components
Neurosurgical implants - Implantable perpheral
nerve stimulators
Hot plate, wax levelling, dental
Knife, plaster, dental
Wax knife, dental
Plaster shears, dental
Wax spatula, dental
General requirements for cutting type dental
instruments
Spatula, stainless steel, dental
Chisels, dental
Pliers, plate, dental
Instruments, plastic filling, dental Part 1 Designation
numbers 1,3,4,5 and 6
Instruments, plastic filling, dental Part 2 Designation
numbers 12,20,21,46,47,153 and 183
Pliers, cone socket, dental - Shape and dimensions
Pliers, bar bending, dental, Waldsach's type
Orthodontic pliers, snipe nose - Shape,dimensions
and tests
Part 2 Pliers, contouring
Spatula, plaster, dental, curved and straight
Spatula, wax, dental, No. 2
Scalers, dental, No. SC 1/2,3/4 and 5/6
Excavators, dental, No.EX 1/2, 3/4, 5/6,
7/8,9/10,11/12 and 13/14
Dental instruments - Dental probes
Elevators, dental,No. 1,2 and 3
Forceps, extraction, dental, upper anteriors, No.1 &
2
Forceps, extraction, dental,lower molar, Hawk's Bill,
No.1
Spoons,cutting, dental, No. 1/2,3/4 and 5/6
Burnisher, dental, No.
BRN 1/2
Carvers, dental, No.
CAR
1/2, 3/4 and 5/6
Dental unit
Press, flask, dental
Articulators, dental
Scissors, dental, No.1, straight and curved on flat
Scissors, crown, dental, straight and curved on flat
Clamp, flask, dental
Gingival margin trimmers, dental, No.
IS 5179
IS 5227
IS 5541
IS 5576
IS 5582
IS 5584
IS 5645
IS 5763
IS 5794
IS 5795
IS 5828
IS 5830
IS 5879
IS 5941
IS 5958
IS 5965
IS 5997
IS 6020
IS 6035
IS 6036
IS 6037
IS 6038
IS 6039
IS 6043
IS 6116
IS 6183
IS 6282
IS 6292
IS 6402
IS 6525
IS 6555
IS 6556
IS 6811
IS 6814
IS 6815
IS 6822
GMT 1/2, 3/4, 5/6 and 7/8
Pluggers, root canal, dental, No.
PLG 1,2 and 3
Flask, dental
Spatula, plastics, clear and coulourless, dental
Carriers, amalgam, dental, No.1 and 2
Mandrels, dental, No. 1,2 and 3
Syringe, hypodermic, cartridge, dental, pivot breech
cap type
Pedestal cuspidor
Occlusal plane guide, dental
Pliers, pin-roughening and bending, dental
Orthodontic pliers, Crown and ligating, Howe's
pattern - Shape, dimensions and tests
Orthodontic pliers, workroom - Shape, dimensions
and tests
Dimensions for transmission coupling (slip-joint) to
dental handpieces
Punch, rubber dam, dental
Dental engine, electric
Reflector and cheek retractor, dental
Frame, rubber dam, dental
Holder, wire and broach, dental
Mouth mirror and mouth mirror handle, dental
Zinc phosphate dental cement
Alginate dental impression material
Zinc oxide-eugenol dental impression paste
Dental impression (modelling) compound
Zinc oxide-eugenol dental cement
Copper phosphate-zinc phosphate dental cement
Dental equipment - Dental patient chair Specification
Dimensions for dental section arm
Waste receiver, dental
Cotton wool holder, dental
Forceps, rubber dam clamp and cotton roll clamp,
dental
Syringe, hypodermic, dental, for interchangeable
needles
Dental laboratory plaster
Dental impression plaster
Syringe, water, self-filling, dental
Syringe, air and water, dental
Retainers, matrix, dental,No.1 and 2
Cutter, distal arch wire, dental
IS 6823
IS 6824
IS 6825
IS 6826
IS 6827
IS 6828
IS 6829
IS 6846
IS 6856
IS 6857
IS 6858
IS 6859
IS 6866
IS 6867
IS 6868
IS 6870
IS 6884
IS 6887
IS 6888
IS 7066
IS 7139
IS 7141
IS 7333
IS 7334
IS 7335
IS 7336
IS 7338
IS 7339
IS 7340
IS 7348 : Part 2
IS 7348 : Part 3
IS 7348 : Part 4
IS 7348 : Part 5
Forceps, extraction, dental,lower molars
Forceps, extraction, dental, lower wisdom tooth
Forceps, extraction, dental, upper cuspids and
bicuspids
Forceps, extraction, dental, lower incisors, cuspids
and bicuspids, left
Forceps, extraction, dental, upper molars, left
Forceps, extraction, dental, upper molars, right
Orthodontic pliers, angle wire bending - Shape,
dimensions and tests
General requirements for control unit for airturbine,
dental
Forceps, extraction, dental, upper root, narrow beak
Separator, double-bow, dental
Forceps, exteraction, dental, lower incisors, cuspids
and bicuspids
Forceps, extraction, dental, upper root, wide beak
Forceps, extraction, dental, upper wisdom tooth
Forceps, extraction, dental, upper root, medium beak
Dental instruments - Dental extraction forceps Specification
Pliers, loop bending, dental
Dental silicate cement
Dental base polymer resin
Dental inlay casting wax
Trays, instrument-cabinet, dental
Orthodontic pliers, arrow headed,clasp forming Shape, dimensions and tests
Orthodontic pliers, band forming, Peak's pattern Shape, dimensions and tests
Orthodontic pliers, spring forming - Shape and
dimensions
Pliers, clasp adjusting, dental
Pliers, closing loop, Nance type, dental
Pliers, tie back, nance type dental
Orthodontic pliers, band removing, posterior - Shape
and dimensions
Pliers,anterior band removing, anterior, dental
Pliers, pin and ligature cutting, dental
Glossary of terms relating to dentistry Part 2 Dental
instruments and accessories
Glossary of terms relating to dentistry Part 3 Dental
materials
Dental vocabulary Part 4 : Dental equipment
Dental vocabulary Part 5 Terms associated with
IS 7425
IS 7467
IS 7474
IS 7476
IS 7676
IS 7677
IS 7780
IS 7781
IS 7833
IS 7853
IS 7966
IS 8019
IS 8020
IS 8021
IS 8022
IS 8044
IS 8045
IS 8046
IS 8047
IS 8207
IS 8283
IS 8284
IS 8287
IS 8346
IS 8527
IS 8528
IS 8529
IS 8571
IS 8815
IS 8850
IS 8864
IS 8948
IS 8949
IS 9003
IS 9699
IS 9717
IS 9774
IS 9932
IS 9940
IS 10011
testing
Dental casting investment for gold alloys
Bands, matrix, dental, No. 1 and 2
Pliers, collar, dental
Nippers, cutting,dental
Chisel, osseous, dental
Exolevers, apical, dental
Pliers, ligature forming, dental
Pliers, angle ribbon arch with groove, dental
Knives, gingivectomy, dental
Surveyor, cast, dental
Dental modelling wax
Dental artificial stone
Baseplate dental
Dental sticky wax
Acrylic resin teeth
Forceps, extraction, dental, lower molar, children
Forceps, extraction, dental,lower incisors and
canines, children
Forceps, extraction, dental, upper incisors
Forceps, extraction, dental, upper molar, children
Forceps, rongeur, dental
Tweezers, soldering
Pusher, band, dental, Mershon's pattern
Pliers,band stretching and contouring, parrot beak,
dental
Stool, operating, dental
Tweezers, extraction, dental
Pliers, anterior band forming, double beak, dental
Dental instruments - Pliers, posterior band forming,
double beak
Dental porcelain
Dentistry - Designation system for teeth and areas of
the oral cavity
Guide for the use of dental materials
Autopolymerizing (acrylic) resins for dental use
Dental instruments - Pliers, ligature, tying)
Dental instruments - Pliers, curved, Howe's pattern
Acrylizer (curling unit)
Chisel, dental, large
Trays, impression, dental
Pliers, bracket opening, dental
Recommendations for lighting of dental operatories
Trimmers, electrically operated, for dental models
Resin-based dental filling materials
IS 10012
IS 10088
IS 10307
IS 10309
IS 10353
IS 10354
IS 10663
IS 10664
IS 10798
IS 10828
IS 10836 : Part 1
IS 10866
IS 11044
IS 11045
IS 11317
IS 11394
IS 11628
IS 11929
IS 12181
IS 12374
IS 12507
IS 12601
IS 12602
IS 12624
IS 12721
IS 12764
IS 12797
IS 12855
IS 13701
IS 13710
IS 4535
IS 4555
IS 4556
IS 4567
IS 4577
Dental zinc oxide/eugenol filling materials
Retractor, dental
Dental instruments - Working parts of burs and
cutters, dental - Nominal sizes and designation
Key, torquing, edgewise
Pliers, McKellops' type, dental
Torch, alcohol, dental
Burs, dental
Burs, finishing, dental
Indentification system for items of dental equipment
at the working place
Pliers, band contouring, dental, Johnson's pattern
Pliers, loop bending, dental, Tweed's pattern Part 1
Fixed beak, Type 1
Abrasives, dental
Acrylic trimmers, dental
Metal trimmers, dental
Shears, laboratory, straight, dental
Pliers, distal end cutting, with safety hold, dental
Agar impression material
Adopters, band, dental
Determination of colour stability of dental polymeric
materials
Dimensions for swivel type coupling to dental
handpieces
General requirements for Dental Pliers
Dental instruments - Pliers, lip-safe, flat nose
Dental Instruments - Nippers, cutting, carbide tip
Dental materials - Root canal obturating points
Dental materials - Base metal casting alloys
Dental handpieces - Hose connectors for dental hand
pieces
Dental materials - Dental glass polyalkenoate
cements
Dental materials - Root canal sealing materials
Dentistry - Dental Rotary Instruments - Test
methods
Dental materials - Dental zinc polycarboxylate
cements - Specification
Saw-grip terminal device for artificial limbs
Biprong terminal device, draughtsman, for artificial
limbs
Typing finger terminal device for artificial limbs
Pliers terminal device, quick-grip, for artificial limbs
Spade-grip terminal device for artificial limbs
IS 4609
IS 4675
IS 4677
IS 5015
IS 5144
IS 5145
IS 5150
IS 5586
IS 5588
IS 5594
IS 5607
IS 5665
IS 5745
IS 5796
IS 5809
IS 5810
IS 5827
IS 5956
IS 5963
IS 5964
IS 6099
IS 6205
IS 6222
IS 6223
IS 6224
IS 6275
IS 6302
IS 6414
IS 6571
IS 6624
IS 6625
IS 6626
IS 6781
IS 6802
IS 6812
IS 6979
IS 6992
IS 6993
Pencil-holding device for artificial limbs
Light split-hook device for artificial limbs
Steering appliances for artificial limbs
Knife-terminal device for artificial limbs
Metal forearm crutches (Canadian pattern)
Walking sticks
Rubber tips for crutches and walking sticks
Metal component for sectional forearm
Quadriceps boots
Wrist unit rotary for hand prosthesis
Semi-automatic elbow joint
Shoulder wheel
Heel socket and plate for orthopaedic calipers and
braces
Weight set, disc,for physiotherapy exercise other
than pulley arrangements
Ankle joint for orthosis
Knee joint with lock for orthosis
Paraffin wax bath
Hip joint with lock for orthosis
Knee joint without lock for steel orthopaedic
calipers
Round spur for orthopaedic calipers
Rehabilitation equipment - Invalid walkers with
crutches - Specification
Stationary cycle exerciser for adults
Thigh band for orthopaedic calipers and braces
Calf band for orthopaedic calipers and braces
Tuber band for orthopaedic calipers and braces
Lower extremity full length brace with locks
Whirlpool bath
Parallel walking bars, adult and child sizes for the
handicapped
Rehabilitation equipment - Wheelchairs, nonfolding, adult size, institutional model Specification
Basic hand splint, palmar arch support
Basic hand splint, component
Basic hand splint, forearm piece
Staple ankle joint
Prosthetic hip joint
Knee joint, uniaxial for below knee prostheses
Cerebral palsy chair, tubular, institutional model
Cerebral palsy chair, domestic model
Through knee joint
IS 6809
IS 6810
IS 6995
IS 7373
IS 7419
IS 7454
IS 7924
IS 8086
IS 8088
IS 8492
IS 8511
IS 8798
IS 9471 : Part 1
IS 9471 : Part 2
IS 9471 : Part 3
IS 9471 : Part 4
IS 9471 : Part 5
IS 9797
IS 10110
IS 10111
IS 10537
IS 10538
IS 10539
IS 10926
IS 10928
IS 10929
IS 10976
IS 11242
IS 11243
IS 11279
IS 11316
Rehabilitation equipment - Fixed-height walking
frame - Specification
Rehabilitation equipment - Metal tripod and tetrapod
sticks - Specification
Cruciform below-knee joint
Hip disarticulation joint unit for lower limb
prosthetic fitments
Stairs for physical rehabilitation
Rehabilitation equipment - Wheelchairs, folding,
adult size - Specification
Thigh blocks, wooden
Rehabilitation equipment - Wheelchairs, folding,
junior size - Specification
Tricycle, hand propelled
Ankle blocks, wooden
Valves for suction sockets for artifical limbs
Wheel, multipurpose
Modular lower limb orthotic components: Part 1
Stirrups
Modular lower limb orthotic components: Part 2
Stirrups, split
Modular lower limb orthotic components: Part 3
Stirrup plates
Modular lower limb orthotic components: Part 4
Joint unit, ankle
Modular lower limb orthotic components: Part 5
Joint unit, knee
Cycle, fret-saw
Table spoon terminal device for artificial limbs
Table fork terminal device for artificial limbs
Ankle bolt for sach foot
Kitchen knife terminal device for artificial limbs
Sickle terminal device for artificial limbs
Tweezer terminal device for artificial limbs
Table, tilting (manual)
Hook voluntary opening terminal device for
artificial limbs
Wheelchairs - Nomenclature, terms and definitions
Lumbo sacral flexion-extension and lateral-flexion
control brace
Thoraco-lumbo-sacral, flexion-extension and lateralflexion control brace
Braille slate
Cosmetic hand artificial limb (Supersedes IS 5587 :
1970)
IS 11646 : Part 1
IS 11646 : Part 2
IS 11647
IS 11708
IS 12104
IS 12152
IS 12184
IS 12439
IS 12664 : Part 1
IS 12683 : Part 1
IS 12683 : Part 2
IS 13017
IS 13822
IS 13837
IS 14429
IS 489 : Part 1
IS 1108
IS 3055 : Part 2
IS 13970 : Part 1
IS 13970 : Part 2
IS 13970 : Part 3
IS 14284
IS 3055 : Part 1
IS 3234 : Part 1
IS 3234 : Part 2
IS 3236
IS 3237 : Part 2
IS 3237 : Part 3
Cane for visually handicapped: Part 1 Rigid, long,
white
Cane for visually handicapped: Part 2 Folding type
Braille paper
Hand, Mechanical
Abacus for visually handicapped
Pocket frame, braille writing
Stylus for braille writing
Signature guide for visually handicapped
Artificial limbs - Sach foot for lower extremity
prostheses: Part 1 Design and dimensions
Measuring devices for visually impaired persons:
Part 1 Scale, general purpose
Measuring devices for visually impaired persons:
Part 2 Tape
Walker rollator
Braille duplicating sheet - Specification
Braille duplicating machine - Specification
Braille shorthand machine, - Specification
Glass ampoules Part 1: Ampoules for liquid
injectables
Pharmaceutical glass containers
Clinical thermometer Part 2: Enclosed scale type
Prosthetics and Orthotics - Vocabulary: Part 1
General terms for external limb prostheses and
external orthoses
Prosthetics and Orthotics - Vocabulary: Part 2 Terms
relating to external limb prostheses and wearers of
these prostheses
Prosthetics and Orthotics - Vocabulary: Part 3 Terms
relating to external orthoses
Laboratory glassware pipette pastuer, disposable Specification
Clinical thermometers Part 1: solid stem type Specification
Conical fittings with a 6 % (Luer) taper for syringes,
needles and certain other medical equipment Part 1:
General requirements
Conical fittings with a 6% (Luer) taper for syringes,
needles and certain other medical equipment Part 2
Lock fittings
Hypodermic syringes for general purposes Specification
Special purpose syringes Part 2 Tuberculin syringe
Special purpose syringes Part 3 BCG Syringe
IS 3237 : Part 4
IS 3237 : Part 5
IS 3237 : Part 6
IS 3237 : Part 7
IS 3317
IS 3423
IS 3740
IS 3741 : Part 1
IS 3741 : Part 2
IS 3742
IS 4067
IS 4069
IS 4087
IS 4363
IS 4364
IS 4381
IS 4444
IS 4445
IS 4529
IS 4708
IS 4754
IS 5147
IS 5155
IS 6606
IS 6942
IS 6943
IS 6944
IS 7039
IS 7171
IS 7183
IS 7858
IS 8501
IS 9430
IS 10258
IS 10269
IS 10654
IS 10867
Special purpose syringes Part 4 Allergy vaccine
syringe
Special purpose syringes Part 5 Post operation care
Special purpose syringes Part 6 Irrigation syringe
Special purpose syringes Part 7 Force feed syringe
Needles, hypodermic
Glass containers for Transfusion fluids
Tubes, glass, for pathological work
Sedimentation tubes Part 1 Westergren tubes
Sedimentation tubes Part 2 Wintrobe tubes
Pipettes, dilution for haemocytometer
Tube, swab (west type), for throat
Urinometer
Pipette for haemoglobinometers and blood pipette
for biochemical work
Drip counter E.M.S. pattern
Pipettes, serological
Pathological microscope
Bottles, bacteriological
Filter and filter chamber for blood transfusion
Glass tube for medical thermometers
Urine, glass, conical
Staining troughs and jar
Examination lamps with bulls eye condenser (floor
model)
Pipettes, Ostwald-Folin type
Albuminometer (Esbach's) with stopper, stand and
case
Flask, roux, bacteriological,with or without offset
neck (1000 ml nominal capacity)
Cover, glass used with haemocytometer
Bottle, Bijou, bacteriological
Tube,culture, screw cap
Drip counter with filter
Flask, culture,Haffkine
Operation microscope - Specification
Anaerobic jar
Tube, haemometer
Sterile hypodermic syringes for single use Specification
Haemocytometer,counting chamber,clinical and
diagnostic apparatus
Sterile hypodermic needles for single use
Single use blood specimen containers upto 25 ml
capacity
IS 10916
IS 11383
IS 11400
IS 12050
IS 12227
IS 12572 : Part 5
IS 10956
IS 10978
IS 12092
IS 12096
IS 12116 : Part 1
IS 13170
IS 12572 : Part 6
IS 12572 : Part 7
IS 12622
IS 14193
IS 3390
IS 12572 : Part 8
IS 12572 : Part 9
IS 12572 : Part
10
IS 12572 : Part
11
Evacuated tubes for blood specimen collection
(Vacutainers)
Thin walled glass capillary pipettes
Hypodermic syringes, interchangeable type,for
general purposes (supersedes IS : 3238 : 1965)
Sterile hypodermic syringes with needle attached for
single use
Syringes for insulin-Sterile for single use
Guide for evaluation of medical devices for
biological hazards Part 5 Method of test for
intracutaneous reactivity of extracts from medical
devices
Welding coupling body for oil hydraulic couplings
Welding coupling assembly for oil-hydraulic
systems
Method for test for hose assemblies used in
hydraulic fluid power systems
Hexagonal socket screw plugs with parallel screw
threads for fluid power systems
Hexagonal head taper plugs for oil hydraulic
systems : Part 1 Made from forgings
Fluid power systems and components - Metric ports
- Dimensions and design
Guide for evaluation of medical devices for
biological hazards Part 6 Method of test for systemic
toxicity; assessment of pyrogenicity in rabits of
extracts from medical devices
Guide for evaluation of medical devices for
biological hazards Part 7 Method of test for
sensitization: Assessment of the potential of medical
devices to produce delayed contact dermatitis
Medical thermometers for hypothermia, subnormal
range
Ovulation thermometers
Sphygmomanometers, mercurial
Guide for evaluation of medical devices for
biological hazards Part 8 Method of test for skin
irritation of extracts from medical devices: and
Guide for evaluation of medical devices for
biological hazards Part 9 Method of test for skin
irritation by solid medical devices
Guide for evaluation of medical devices for
biological hazards Part 10 Biological testing and
evaluation of dental materials
Guide for evaluation of medical devices for
biological hazards Part 11 Method of tests for eye
IS 12572 : Part
13
IS 12572 : Part
14
IS 3391
IS 3392
IS 3393
IS 3949
IS 4113 : Part 1
IS 4113 : Part 2
IS 4154
IS 4533
IS 5602
IS 6190
IS 6581
IS 6807
IS 7176
IS 5622
IS 6194
IS 6513
IS 7409 : Part 1
IS 7409 : Part 2
IS 7625
IS 7627
IS 7652
IS 7860
IS 7869
IS 7885
IS 8254 : Part 1
IS 8254 : Part 2
IS 8312
irritation
Biological evaluation of medical devices Part 13
Tests for geno-toxicity, carcinogenecity and
reproductive toxicity
Biological evaluation of medical devices Part 14
Selection of tests for interactions with blood
Stethoscopes
Anaesthetic airways
Mouth props and airways (London Hospital pattern)
Dimensions and screw thread for lamp used in
laryngoscope
Laryngoscopes Part 1 Hook on type handle blade
fittings
Laryngoscopes Part 2 Miniature electric lamps
screw threads and sockets
Endotracheal connections
Suction apparatus - Specification
Anaesthetic breathing bags
Anaesthetic face masks
Endotracheal tubes (rubber)
Reinforced (flexo-metallic) Magill's endotracheal
tube
Anaesthetic apparatus, drawover portable type [first
revision]
Soda-lime canisters for use with gas anaesthetic
apparatus (Water's to-and-fro)
Intermittent positive pressure respirator,bag type,
manually operated
Fine adjustment valves for use with oxygen
cylinders for oxygen therapy
Anaesthetic and respiratory equipment - Conical
connectors Part 1: Cones and sockets
Anaesthetic and respiratory equipment - Conical
connectors Part 2: Screw threaded weight bearing
connectors
Gag, mouth, Doyen's pattern
Gag, mouth, Mason's pattern
Sphygmomanometer, aneroid type
Mask, Schimmelbusch's pattern,with Chadborn's
modification
Spray, De Vilbiss' pattern
Spray, Macintosh's pattern [first revision]
Valve, non-rebreathing Part 1 Ruben's pattern
Valve, non-rebreathing Part 2 Ambu-Hesse's pattern
Forceps, introducing, endotracheal tube, Magills's
IS 8432
IS 9462
IS 9824 : Part 1
IS 9824 : Part 2
IS 10796
IS 11363
IS 11364
IS 11807
IS 9824 : Part 3
IS 11378
IS 11808
IS 12504 : Part 1
IS 12504 : Part 2
IS 12504 : Part 3
IS 12504 : Part 4
IS 12504 : Part 5
IS 12505 : Part 1
IS 12505 : Part 2
IS 12655 : Part 4
IS 12827
IS 13200
IS 3118
IS 3119
IS 3120
IS 3831
IS 3991
IS 3992
IS 3993
IS 3994
IS 3995
IS 3996
IS 3998
IS 4033
IS 4034
IS 4035
pattern
Tubes, tracheostomy [rubber or plastic]
Humidifier, nebulizing, ventury type
Transfusion equipment for medical use Part 1: Glass
transfusion bottle, closures and caps
Transfusion equipment for medical use Specification Part 2: Blood-taking set for single use
Lung ventilators
Tubes,breathing,for anaesthetic apparatus and
ventilators
Anaesthetic reservoir bags
Oropharyngeal airways
Transfusion equipment for medical use Part 3:
Transfusion sets for single use
Anaesthetic apparatus (anaesthetic
machines),continuous flow,inhalational, for use with
humans
Tracheal tubes connectors
Tracheal tubes, Part 1: General requirements
Tracheal tubes, Part 2 Oro-tracheal and nasotracheal tubes of the Magill type (Plain and cuffed)
Tracheal tubes, Part 3 Murphy type
Tracheal tubes, Part 4 Cole type
Tracheal tubes, Part 5 Requirements and methods of
test for cuff and tubes
Tracheostomy tubes, Part:1 Connectors
Tracheostomy tubes, Part 2 Basic Requirements
Infusion equipment for medical use : Part 4 Infusion
sets for single use
Non-flammable medical gas pipeline system
Anaesthesiology - Vocabulary
Electric bacteriological incubators
Hot air sterilizers
Baby incubators
Sterilizers shallow (dressing drums)
Bowls, lotion - Specification
Trays, kidne
Trays, instruments - Specification
Bowls, wash - Specification
Mugs
Spittoons
Cups, medicine
Furniture, hospital, general requirements
Castors for hospital equipment
Trolleys, stretcher
IS 4036
IS 4266
IS 4267
IS 4455
IS 4458
IS 4494
IS 4769
IS 4787
IS 5022
IS 5029
IS 5035
IS 5291
IS 5336
IS 5337
IS 5630
IS 5631
IS 5782
IS 6083
IS 6106
IS 6208
IS 6593
IS 6877
IS 6904
IS 6905
IS 7036
IS 7081
IS 7083
IS 7091
IS 7099
IS 7378
IS 7455
IS 7596
IS 8079
IS 8462
IS 9132
IS 9133
IS 9310
IS 9395
IS 10150
IS 10263
IS 10264
IS 10764
IS 10783
Trolleys, patient
Lockers, bedside,for hospital use
Stands, wash hand basin
Trolleys, soiled linen
Screen, bedside
Tables, overbed
Trolley, dressing
Table,examination
Sterilizers, instruments (table model)
Bedsteads, hospital, general purposes
Sterilizers, bowl and utensil (pedal type)
Tables, operation, hydraulic, major
Back rest
Cot, dropside, baby, hospital
Cribs (cradles), maternity
Trolley, instruments,plain and curved
Bowls, sponge
Table, obstetric, labour
Tables, operation, hydraulic, minor
Spoons, plastics, measuring medicine
Electric serological water baths
Cabinet, instruments
Receptacle, waste
Instruments table, Mayo's type
Table, postmortem
Stool, revolving,for hospital use
Trolley, medicine
Lifter, bed, adjustable
Trolley, dressing drum
Bed, Fowler's, hospital
Sterilizer, pressure, hot and cold water
Table, operation, orthopaedic , Albee's type
Table,operation, urological
Sterilizers, portable,vertical pressure type
Table, operation, folding type
Trolley, for general medical store
Water purifier, potable
Bed, intensive care
Guide for sterilization of medical products
Deep fat fryer,single and double pan, electrically
operated, for large catering establishment
Trolley, hot food, for hospital and industrial
canteens
Boiling pan
Patient lifting devices, mobile, manually operated
IS 11882
IS 11971
IS 12430
IS 13836
IS 13850
IS 4605
IS 4717
IS 4738
IS 5405
IS 9751
IS 10578
IS 10603
IS 10829
IS 11163
IS 11569
IS 12172
IS 12173
IS 12304
IS 13115
IS 14274
IS 14306
IS 14316
IS 10568
IS 10937
IS 10938
IS 10940
IS 10953
IS 10954
IS 10955
IS 10963
IS 10964
IS 12243
IS 12245
IS 12246
IS 12329
IS 12344
IS 12670
IS 14420
IS 10905 : Part 1
Frying pan, tilting type (electrically operated)
Jacketed cooking vessel,tilting type (electrically
operated)
Safety code for installation, maintenance and
servicing of sterlizers
Potato peeling machine (electrically operated) Specification
Dish washing machine, heavy duty, ratchet type Specification
Crepe bandage
Zinc oxide self-adhesive plaster
Plaster of Paris bandage
Sanitary napkins
Bandage, suspensory
Surgical spring trusses
Abdominal belts
X-ray detectable gauze swabs and laparotomy
sponges
First-aid dressings
Cervical collar
Distraction collar
Cervical halter
Plastic cervical collar
Portable first aid kit for general use - Specification
Bandage, `T' shaped, calico - Specification
Bandage, triangular, calico - Specification
Swabs, small, in bags of 50 - Specification
Knife, teat, Mclean
Nose ring and key,bull
Searcher, double edged,with handle and sheath
Castrator
Catheter, uterine, single channel [Nelson type]
Catheter, cow
Gimlet for trephine
Forceps, hoof testing
Forceps bullet, veterinary
Rasp, tooth,reversible
Dilators teat (Nudson)
Irons, pyropuncture; with copper needles
Self-centring Bone holding forceps
Reduction Forceps
Veterinary pump, stomach
Tracheal tubes for large animals used for veterinary
anaesthesia - Specification
Recommendations for basic requirements of general
IS 10905 : Part 2
IS 12377
IS 6991
IS 7583
IS 8048
IS 8885
IS 12433 : Part 1
IS 7620 : Part 1
IS 7620 : Part 2
IS 7620 : Part 3
IS 9286 : Part 1
IS 9286 : Part 2
IS 10550
IS 10554
IS 11302 : Part 1
IS 11302 : Part 2
IS 11331
IS 11393
IS 11478 : Part 1
IS 11478 : Part 2
IS 11661
IS 11753
IS 11754
IS 12311
IS 13807
hospital buildings: Part 1 Administrative and
hospital services department buildings
Recommendations for basic requirements of general
hospital buildings: Part 2 Medical services
department buildings
Classification and matrix for various categories of
hospitals
Radiographic cassettes
High frequency surgical equipment
Electrocardiograph
Electromyograph
Basic requirements for hospital planning:Part 1 upto
30 bedded hospitals
Medical electrical eqipment - Diagnostic medical Xray equipment ; Part 1 Mechanical and electrical
safety requirements
Medical electrical equipment - Diagnostic medical
X-ray equipment : Part 2 performance requirements
Medical electrical equipment - Diagnostic X-ray
equipment: Part 3 Radiation safety requirements
Cardiac defibrillators: Part 1 Safety requirements
Cardiac defibrillators: Part 2 Construction and
performance requirements
Medical treatment lamps
Radiographic intensifying screens for medical use dimensions
Electro-encephalograph (EEG): Part 1 General and
safety requirements
Electro-encephalograph (EEG): Part 2 Performance
requirements
Electrical muscle and nerve stimulators for
therapeutic purpose
Scintillation counters
Application guide for medical electrical equipment:
Part 1 General requirements and electrical
installations
Application guide for medical electrical equipment:
Part 2 Safety provisions, application, operation and
maintenance
Safety of lung ventilators for medical use
Electrical impedance plethysmograph
Implantable ventricular pacemakers
Microwave diathermy equipment for therapeutic
purposes
Medical radiology - Terminology
IS 12024
IS 13020 : Part 1
IS 13020 : Part 2
IS 13523 : Part 1
IS 13523 : Part 2
IS 13709
IS 13728
IS 13729
IS 13812 : Part
19
IS 13813
IS 13814
IS 14180
IS 786
IS 1890
IS 8402
IS 10007
IS 1105
IS 1890 : Part 5
IS 7784 : Part 1
IS 7784 : Part 2 :
Sec 1
IS 1890 : Part 6
IS 1890 : Part 8
IS 1890 : Part 11
Methods for determination of characteristics of focal
spots in diagnostic X-ray tube assemblies for
medical use
Medical electrical equipment - Ultrasonic therapy
equipment: Part 1 Particular requirements for safety
Medical electrical equipment - Ultrasonic therapy
equipment: Part 2 Performance and constructional
requirements
Medical electrical equipment - Shortwave therapy
equipment: Part 1 General and safety requirements
Medical electrical equipment - Shortwave therapy
equipment: Part 2 Performance requirements
Medical electrical equipment - Dental X-ray
equipment - Radiation safety
Entrance field sizes of elctro-optical X-ray image
intensifiers
Determination of the luminance distribution of
electro-optical X-ray image intensifiers
Medical electrical equipment - Particular
requirements for safety Part 19 Baby incubators
Measurement of the conversion factor of electrooptical X-ray image intensifiers
Determination of the image distortion of electrooptical X-ray image intensifiers
Graphical symbols for electrical equipment in
medical practice
Conversion factors and conversion tables (English Hindi)
Quantities and units : Part 0 General Principles
Quality management and quality assurance Vocabulary
Quality management - Guidelines for configuration
management
Method for precise conversion of inch and metric
dimensions to ensure interchangeability
Quantities and Units : Part 5 Electricity and
magnetism
Code of practice for design of cross drainage works:
Part 1 General features
Code of practice for design of cross drainage works:
Part 2 Specific requirements Section I Aqueducts
Quantities, Units and Symbols : Part 6 Light and
related radiations
Quantities and Units : Part 8 Physical chemistry and
molecular physics
Quantities and Units : Part 11 Mathematical signs
IS 1890 : Part 13
IS 6524
IS 6532
IS 9000 : Part 1
IS 9000 : Part 2
IS 10013
IS 10708
IS 12040
SP 65
IS 9000 : Part 3
IS 9004 : Part 1
IS 9004 : Part 2
IS 9004 : Part 3
IS 10006
SP 63
IS 2
IS 397 : Part 3
IS 2500 : Part 2
IS 2500 : Part 3
IS 4905
IS 5420 : Part 1
IS 5420 : Part 2
and symbols for use the physical sciences and
technology
Quantities, units and symbols : Part 13 Solid state
physics
Code of practice for installation and observation of
instruments for temperature measurement inside
dams; resistance type thermometers
Code of practice for design, installation, observation
and maintenance of uplift pressure pipes for
hydraulic structures on permeable foundations
Quality management and quality assurance standards
- Part 1: Guidelines for selection and use
Quality management and quality assurance standards
- Part 2: Generic guidelines for the application of
ISO 9001, ISO 9002 and ISO 9003
Guidelines for developing quality manuals
Guide for the analysis of quality costs
Guidelines for development of vendor rating system
Handbook on IS/ISO 9000 for small businesses
Quality management and quality assurance standards
- Part 3 : Guidelines for the application of ISO
9001:1994 to the development, supply installation
and maintenance of computer software
Quality management and quality system elements Part 1: Guidelines
Quality management and quality system elements Part 2 : Guidelines for services
Quality management and quality system elements Part 3: Guidelines for processed materials
Quality management - Guidelines to quality in
project management
Explanatory guide for the application of quality
system standards (IS/ISO 9001, 9002 and 9003)
Rules for rounding off numerical values
Method for statistical quality control during
production:Part 3 Special control charts
Sampling inspection procedures:Part 2 Inspection by
variables for percent defective
Sampling inspection procedures : Part 3 Sampling
plans indexed by Limiting Quality (LQ) for isolated
lot inspection
Methods for random sampling
Guide on precision of test methods:Part 1 Principles
and applications
Guide on precision of test methods:Part 2 Inter
laboratory testing
IS 6200 : Part 1
IS 7600
IS 8900
IS 10645
IS 12347
IS 6200 : Part 3
IS 7200 : Part 1
IS 7200 : Part 2
IS 7920 : Part 1
IS 7920 : Part 2
IS 7920 : Part 3
IS 9300 : Part 1
IS 9300 : Part 2
IS 10427 : Part 2
IS 12348
IS 12801
IS 14277
IS 6363
IS 7337
IS 9990
IS 10400
IS 11500
IS 11810
IS 12301
IS 13174 : Part 1
IS 13174 : Part 2
IS 13407 : Part 1
IS 13407 : Part 2
IS 14581
Statistical tests of significance:Part 1 t-, Normal, and
F- tests
Analysis of variance
Criteria for the rejection of outlying observations
Method for estimation of process capability
Analysis of means - a graphical procedure
Statistical tests of significance:Part 3 Tests for
normality
Presentation of statistical data:Part 1 Tabulation and
summarization
Presentation of statistical data:Part 2 Diagrammatic
representation of data
Statistical Vocabulary and Symbols : Part 1
Probability and General Statistical Terms
Stastical vocabulary and Symbols : Part 2 Statistical
Quality Control
Statistical vocabulary and symbols : Part 3 Design of
experiments
Statistical models for industrial applications:Part 1
Discrete models
Statistical models for industrial applications:Part 2
Continuous models
Designs for industrial experimentation:Part 2
Orthogonal arrays
Use of probability papers
Pareto diagram and cause and effect diagram
Statistical interpretation of test results - Estimation
of mean, Standard deviaton, regression coefficient Confidence interval
Glossary of terms in work study
Glossary of terms in project network analysis
Glossary of terms in terotechnology
Glossary of terms in inventory control
Methodology for the calculation of relaxation
allowance
Guidelines to establish a value engineering activity
Code of practice for establishing and operating
quality circles
Life cycle costing : Part 1 Terminology
Life cycle costing : Part 2 Methodology
Techniques of work study : Part 1 Method Study
Techniques of Work Study : Part 2 Work
Measurement
Guidelines for formulation and operation of a
Suggestion Scheme in an organization
IS 18
IS 382
IS 795
IS 796
IS 1275
IS 1358
IS 2381
IS 2550
IS 3083
IS 3130
IS 6299
IS 6666
IS 7150
IS 7900
IS 8310
IS 9450
IS 10101
IS 10200
IS 9400
IS 10454
IS 10455
IS 10456
IS 12879 : Part 1
IS 12879 : Part 2
IS 12879 : Part 3
IS 12940
Documentation - Rules for the abbreviation of title
words and titles of publications
Practice for alphabetical arrangement
Guide for preparation of abstracts
Glossary of cataloguing terms
Rules for making alphabetical indexes
Practice for layout of library catalogue code
Recommendations for bibliographical references:
Essential and supplementary elements
Glossary of classification terms
Code of practice for the processing of
microtransparencies (microfilms and microfiche)
(silver halide)
Code of practice for handling and storage of
microtransparencies (microfilms and microfiche)
(silver halide)
Guide for handling, testing and storage of
monochrome photographic prints
Recommendations for frequency notation for
periodical publications
Specification for library catalogue and abstract card
Method for writing calendar dates in all numeric
forms
Guide for standard book numbering (SBN)
Guidelines for placement of images in roll microfilm
Guide for International Standard Serial Numbering
(ISSN)
Specification for A6 size microfiche
Guide for the preparation of bibliographic
description sheet for technical reports
Guidelines for presentation of translations
Guidelines for presentation of abstract sheets in
serial publications
Specification for density of silver-gelatin type
microforms
Microfilming of technical drawings and other
drawing office documents:Part 1 Operating
procedures
Microfilming of technical drawings and other
drawing office documents:Part 2 Quality criteria and
control
Microfilming of technical drawings and other
drawing office documents:Part 3 Unitized 35 mm
microfilm carrier
Documentation - Library statistics - Guide
IS 13536
IS 13550 : Part 1
IS 13550 : Part 2
IS 13550 : Part 3
IS 13550 : Part 5
IS 13550 : Part 6
IS 1250
IS 6298
IS 6660
IS 7400
IS 13550 : Part
11
IS 790
IS 3050
IS 7140
IS 7160 : Part 1
IS 7160 : Part 2
IS 7160 : Part 3
IS 7160 : Part 4
IS 7160 : Part 5
IS 7160 : Part 6
IS 7160 : Part 7
IS 8010 : Part 1
IS 8010 : Part 2
Documentation - Directions of libraries, archives,
information and documentation centres and other
databases
Documentation and Information - Vocabulary : Part
1 Basic concepts
Documentation and Information - Vocabulary : Part
2 Traditional documents
Documentation and Information - Vocabulary : Part
3 Iconic documents
Documentation and Information - Vocabulary : Part
5 Acquisition, identification and analysis of
documents and data
Documentation and Information - Vocabulary : Part
6 Documentary languages
Proof corrections for printers and authors
Guide for selection of type and page layout in
textbooks
Guide for illustrations in books
Guide for preparation and production of textbooks
Documentation and information - Vocabulary :Part
11 Audio-visual documents
Guidelines for preliminary pages of a book
(superseding IS 791 : 1956, IS 792 : 1964 and IS
794 : 1956)
Code of practice for reinforced binding of library
books and periodicals
Symbols and notations for correction of illustrations
and illustration proofs
Guide for print area, margins and type sizes for
textbooks : Part 1 Textbooks in English
Guide for print area, margins and type sizes for
textbooks : Part 2 Textbooks in Hindi
Guide for Print area, margins and type sizes for
textbooks : Part 3 Textbooks in Malayalam
Guide for print area, margins and type sizes for
textbooks : Part 4 Textbooks in Telugu
Guide for print area, margins and type sizes for
textbooks : Part 5 Textbooks in Kannada
Guide for print area, margins and type sizes for
textbooks : Part 6 Textbooks in Tamil
Guide for print area, margins and type sizes for
textbooks : Part 7 Textbooks in Bengali
Guidelines for preparation of technical reports:Part 1
Research and development reports
Guidelines for preparation of technical reports:Part 2
Feasibility reports
IS 9637
IS 11956
IS 11957
IS 1136
IS 8010 : Part 3
IS 12000 : Part 1
IS 13808 : Part 1
IS 13808 : Part 3
IS 13808 : Part 4
IS 13808 : Part 5
IS 1137
IS 1387
IS 1762 : Part 1
IS 1956 : Part 1
IS 1956 : Part 2
IS 1956 : Part 5
IS 1956 : Part 6
IS 2049
IS 2066
IS 2084
IS 2085
IS 2549
IS 2763
IS 4843
IS 5478
IS 7598
IS 10340
Guidelines for presentatiion of information in
technical manuals
Guidelines for the preparation of trade catalogues
Guidelines for contents list of periodicals
Preferred sizes for wrought metal products
Guidelines for preparation of technical reports:Part 3
Industrial potential survey reports
Guide for paper spoilage and wastage for printing
industry:Part 1 Sheetfed, letterpress and offset
processes
Quality management for hospital services (Upto 30bedded hospitals) Guidelines : Part 1 Out-patient
department (OPD) and Emergency Services
Quality management for hospital services (upto 30
bedded hospitals) - Guidelines: Part 3 Wards,
nursing services and operation theatre
Quality management for hospital services (for 30
bedded hospital) - Guidelines : Part 4 Hospital
support services
Quality management for hospital services (for 30
bedded hospital) - Guidelines : Part 5 Hospital
equipment management
Thicknesses of sheet and diameters of wire
General requirments for the supply of metallurgical
materials
Code for designation of steels, Part I Based on lettter
symbols
Glossary of terms relating to iron and steel Part I
General metallurgy, heat treatment and testing
Steel making
Bright steel bar and steel wire
Forging (including drop forging)
Colour code for the identification of wrought steels
for general engineering purposes
Coding and classification for non-ferrous scrap
metals and residues
Code for designation of pig iron
Code for designation of ferro alloys
Code of classification of processed ferrous scrap
Glossary of terms relating to foundry technology
Code for designation of ferrous castings
Thermostat metal sheet and strip
Classification of steels
Glossary of terms for cold-reduced tinplate and coldreduced blackplate
IS 13752
SP 14
SP 17
IS 228 : Part 1
IS 228 : Part 3
IS 228 : Part 4
IS 228 : Part 5
IS 228 : Part 7
IS 228 : Part 8
IS 228 : Part 9
IS 228 : Part 18
IS 228 : Part 19
IS 1559 : Part 2
IS 1559 : Part 4
IS 228 : Part 10
IS 228 : Part 11
IS 228 : Part 12
IS 228 : Part 14
IS 228 : Part 15
IS 228 : Part 16
Guidelines for reporting sequence of elements in
steel & pig iron and mechanical properties in steel
Index to classification of steel
Index to glossary of terms relating to iron and steel
Methods of chemical analysis of steels (part 1)
Determination of carbon by volumetric method (for
carbon 0.05 to 2.50 percent)
Part 3 Determination of phosphorus by alkalimetric
method
Part 4 Determination of total carbon by gravimetric
method (for carbon greater than or equal to 0.1
percent)
Part 5 Determination of nickel by dimethyl glyoxime
(gravimetric) method (for nickel greater than or
equal to 0.1 percent
Part 7 Determination of molybdenum by alphabenzoinoxime method (for molybdenum greater than
1 percent)
Part 8 Determination of silicon by gravimetric
method (for silicon 0.05 to 0.50 percent)
Part 9 Determination of sulphur in plain carbon
steels by evolution method (for sulphur 0.01 to 0.25
percent)
Part 18 Determination of oxygen by instrumental
method
Part 19 Determination of nitrogen by steam
distillation
Part 2 Determination of carbon
part 4 Determination of phosphorus
Part 10 Determination of molybdenum by thiocynate
(photometric) method in low and high alloy steels
(for molybdenum 0.01 to 1.5 percent)
Part 11 Determination of total silicon by reduced
molyddosilicate spectro photo metric method in
carbon steels and low alloy steels (for silicon 0.01 to
0.05 percent)
Part 12 Determination of manganese by periodate
spectrophotometric method in low and high alloy
steels (for manganese 0.01 to 2.0 percent)
Part 14 Determination of carbon by thermal
conductivity method (for carbon 0.005 to 2.000
percent)
Part 15 Determination of copper by thiosulphate
iodide method (for copper 0.05 to 5 percent)
Part 16 Determination of tungsten by
spectrophotometric method (for tungsten 0.1 to 2
IS 1559 : Part 1
IS 1559 : Part 5
IS 1559 : Part 6
IS 2017
IS 2018
IS 2020 : Part 1
IS 2277
IS 3295 : Part 1
IS 3295 : Part 2
IS 6226 : Part 2
IS 7072
IS 6226 : Part 1
IS 7659 : Part 1
IS 8811
IS 12308 : Part 1
IS 12308 : Part 2
IS 12308 : Part 3
IS 12308 : Part 5
IS 12308 : Part 6
IS 12308 : Part 7
IS 12308 : Part 8
IS 12308 : Part
10
IS 12308 : Part
percent)
Methods of chemical analysis of ferro silicon Part 1
Determination of silicon
Part 5 Determination of aluminium
Part 6 Determination of calcium
Methods of Chemical analysis of metallic
manganese
Methods of chemical analysis of calcium silicon
Methods of chemical analysis of silico chromium
Part 1 analysis of silicon and chromium
Methods of chemical analysis of metallic silicon
Method of chemical analysis of ferroboron Part 1
Analysis of carbon, silicon and aluminium
Part 2 Determination of boron
Part 2 Determination on of sulphur by direct
combustion
Glossary of terms relating to emission spectroscopy
Recommendations for apparatus for chemicals
analysis of metals,Part 1 Apparatus for
determination of carbon by direct combustion
Reagents and standard solutions for use in chemical
analysis of metals, ores and minerals Part 1
volumetric solution
Method for spectrographic analysis of plain Carbon
and low alloy Steels by the point to plane spark
technique
Part 1 Determination of total carbon by thermal
conductivity method (for carbon 1.00 to 4.50
percent)
Part 2 Determination of sulphur by iodimetric
titration after combustion (for sulphur 0.005 to 0.25
percent)
Part 3 Determination of manganese by periodic
spectrophotometric method (for manganese 0.1 to
2.5 percent)
Part 5 Determination of phosphorus by alkalimetric
method (for phosphorus 0.01 to 0.50 percent)
Part 6 Determination of silicon by gravimetric
method (for silicon 0.1 to 6.0 percent)
Part 7 Determination of nickel by dimethyl glyoxime
(gravimetric) method(for nickel 0.5 to 36 percent)
Part 8 Determination of chromium by per sulphate
oxidation method (for chromium 0.1 to 28 percent)
Part 10 determination of managanese (upto 7.0
percent) by arsenite(volumetric )method
Part 11 Determination of total carbon by the direct
11
IS 12614 : Part 1
IS 12614 : Part 2
IS 12614 : Part 3
IS 12308 : Part
12
IS 12308 : Part
13
IS 12308 : Part
14
IS 12614 : Part 5
IS 12614 : Part 6
IS 12614 : Part 7
IS 13452 : Part 1
IS 13452 : Part 2
IS 13452 : Part 3
IS 13452 : Part 4
IS 13452 : Part 5
IS 13452 : Part 6
IS 13840 : Part 1
IS 13840 : Part 2
IS 13840 : Part 4
IS 1501 : Part 2
IS 1501 : Part 3
IS 13840 : Part 3
IS 13840 : Part 6
IS 13938 : Part 1
IS 13938 : Part 3
combustion volumetric method (for carbon 1.50 to
4.50 percent)
Part 1 Determination of molybdenum
Part 2 Determination of total carbon
Part 3 Determination of silicon
Part 12 Determination of copper by atomic
absorption spectrometric method (for copper 0.01 to
0.5 percent)
Part 13 Determination of magnesium by atomic
absorptin spectrometric method (for magnesium
upto 0.1 percent)
Part 14 Determination of titanium by hydrogen per
oxide (spectrophotometric) method (for titanium
upto 0.25 percent)
Part 5 Determination of phosphorus
Part 6 Determination of copper
Part 7 Determination of aluminium
Part 1 Determination of silicon in high carbon
ferrochromium by gravimetiric method
Part 2 Determination of silicon in low carbon
ferrochromium by gravimetric method
Part 3 Determination of phosphorus in low carbon
ferrochromium by spectrometric method
Part 4 Determination of total sulphur in low carbon
and high carbon ferrochromium by direct
combustion method
Part 5 Determination of chromium in high carbon
ferrochromium by volumertrric method
Part 6 Determination of chromium in low carbon
ferro chromium
Chemical analysis of ferro titanium Part 1
Determination of carbon by direct combustion
gravimetric method
Part 2 Determination of silicon by gravimetric
method
Part 4 Determination of aluminium by phosphate
method
Part 2 HV 0.2 to less than HV 5
Part 3 Less than HV 0.2
Part 3 Determination of titanium by cupferron
(gravimetric) method
Part 6 Determination of titanium by x-ray
fluorescence technique
Chemical analysis of ferromanganese Part 1
Determination of silicon by gravimetric method
Chemical analysis of ferromanganese Part 3
IS 13938 : Part 4
IS 14529 : Part 2
IS 1403 : Part 1
IS 1500
IS 1586
IS 1599
IS 1608
IS 1754 : Part 1
IS 1754 : Part 2
IS 1755
IS 1757
IS 2328
IS 2329
IS 2330
IS 2854
IS 2855
IS 3407 : Part 1
IS 3407 : Part 2
IS 3410
IS 3711
IS 3754
IS 3766
IS 3803 : Part 1
IS 3803 : Part 2
Determination of phosphorous by volumetric
(alkalimetric) method
Chemical Analysis of Ferromangnese, Part-4
Determination of Total Sulpher by direct
Combustion Method
Chemical analysis of ferro silicon magnesium alloy
Part 2 Determination of calcium and magnesium
Mechanical testing of metals - Reverse bend test
Part 1 Sheet & strip
Method for Brinell hardness test for metallic
materials (Superseding IS 1789:1961, IS 1790:1961
and IS 3054:1965)
Method for Rockwell hardness test for metallic
material (Scales A-B-C-D-E-F-G-H-K)
Method for bend test (Superseding IS 1692:1974, IS
3260:1960 and IS 4598:1968)
Mechanical testing of metals - Tensile Testing
Part I HV 0.2 to HV 100
Part 2 Less than HV 0.2
Method for wrapping test for metallic wire
(Superseding IS 3398:1965 and IS 4168:1967)
Method for charpy impact test (V notch) for metallic
material
Method for flattening test on metallic tubes
Method for bend test on metallic tubes (in full
section)
Method for flanging test on metallic tubes
Determination of young's modulus,tangent modulus
and chord modulus - Test method
Thermostat metals - Determination of flexivity
Part I Tensile creep testing (Superseding IS
3408:1965)
Part 2 Tensile creep stress rupture testing
(Superseding IS 3409:1965)
Metallic materials - Determination of linear thermal
expansion
Wrought steel - Selection and preparation of samples
and test pieces for mechanical tests
Method for calibration of standardized blocks to be
used for Rockwell hardness testing machines(Scales
A-B-C-D-E-F-G-H-K)
Method for calibration of pandulum impact testing
machines for testing metals
Part I Carbon & loow alloy steels
Part 2 Austenitic steels
IS 3804
IS 3848
IS 4132
IS 4169
IS 4258
IS 5069
IS 5070
IS 5074
IS 5075
IS 5073
IS 5076
IS 5242
IS 5699
IS 6885
IS 6886
IS 7095
IS 7096
IS 7172
IS 8632
IS 10166
IS 10167
IS 10175 : Part 1
IS 10180
IS 10181
Method for calibration of Rockwell hardness testing
machines (Scales A-B-C-D-E-F-G-H-K)
Method for end quench test for hardenability of steel
Method for calibration of standardized blocks to be
used for Brinell hardness teing machines
Method for calibration of force-proving instruments
used for the verification of uniaxial testing machines
Hardness conversion tables for metallic materials
Glossary of terms relating to methods of mechanical
testing of metals
Method for beam unnotched impact test for grey cast
iron
Method for axial load fatigue testing of steel
Method of rotating bar bending fatigue testing of
metals
Method for verification of Rockwell superficial
hardness testing machines (Scales 15N,30N,45N,
15T,30T and 45T)
Method for calibration of standardized blocks to be
used for rockwell superficial hardness testing
machines (Scales 15N,30N,45N,15T,30T and 45T)
Method of test for determining shear strength of
metals
Method for chill testing of cast iron
Method for Knoop hardness testing of metals
Method for dynamic force calibration of axial load
fatigue testing machines by means of a strain gauge
technique
Method for verification of Knoop hardness testing
machines
Method for scleroscope hardness testing for metallic
materials
Method for verification of scleroscope hardness
testing machines
Method for identification of test-piece axes
Method for calibration of standardized test block for
verification of scleroscope hardness testing
equipments
Method for upsetting test on metallic materials
Mechanical testing of metals -Modified erichsen
cupping test - sheet and strip Pt 1 Thickness upto 2
mm
Method for plain strain fracture toughness testing of
metals
Method for determination of magnetic permeability
of iron and steel
IS 10623
IS 10636 : Part 2
IS 10636 : Part 3
IS 10927 : Part 1
IS 10588
IS 10636 : Part 1
IS 10927 : Part 2
IS 10927 : Part 3
IS 11240
IS 11999
IS 12261
IS 12278
IS 12514
IS 12872
IS 13237
IS 13838
IS 279
IS 513
IS 648
IS 649
IS 1029
IS 1148
IS 1149
IS 1812
IS 1977
IS 1990
IS 2100
IS 1993
IS 2002
IS 2385
IS 2507
Drop weight tear test on ferritic steels and line pipe
Part2 Test method for high stress abrasion
Part 3 Test method for low stress abrasion
Part 1 HV 5 to HV 100
Tables of Brinell hardness values for use in test
made on flat surfaces
Part I Test method for gouging abrasion resistance
(Jaw crusher test)
Part 2 HV 0.2 to less than 5
Part 3 Less than HV 0.2
Method for falling weight test on metallic materials
Method for determination of plastic strain ratio 'r' for
steel sheets
Method for reverse torsion test for metallic wire
Method for ring tensile test on metallic tubes
Method for torsional stress fatigue testing
Metallic materials - Verification of extensometers
used in uniaxial testing
Metallic foils - Tension testing
Mechanical testing of metals - Determination of
poisson's rates
Galvanized steel wire for telegraph and telephone
purposes
Cold-rolled low carbon steel sheets and strips
Non-oriented electrical steel sheets and strips for
magnetic circuits
Methods for testing steel sheets for magnetic circuits
of power electrical apparatus
Hot-rolled steel strip (baling)
Hot-rolled rivet bars (upto 40 mm dia) for structural
purposes
High tensile steel rivet bars for structural purposes
Carbon steel wire for the manufacture of wood
screws
Low tensile structural steels
Steel rivet and stay bars for boilers
Steel billets, bars and sections for boilers
Single cold reduced tinplate and single cold reduced
blackplate - electrolytic and hot dipped tinplate sheet
and blackplate sheet
Steel plates for pressure vessels for intermediate &
high temperature service including boilers
Hot-rolled mild steel sheet and strip in coil form for
cold-reduced tinplate and cold-reduced blackplate
Cold-rolled steel strips for springs
IS 2589
IS 2591
IS 2830
IS 2831
IS 2879
IS 3024
IS 3039
IS 3195
IS 3298
IS 3422
IS 3431
IS 3503
IS 3945
IS 3975
IS 4072
IS 3885 : Part 1
IS 4223
IS 4224
IS 4454 : Part 2
IS 4454 : Part 3
IS 4454 : Part 4
IS 4824
IS 5239
IS 5986
IS 5993
IS 6902
IS 6915
IS 6967
IS 7226
Hard drawn steel wire for upholstery springs
Dimensions for hot rolled bars for threaded
components
Carbon steel cast billet ingots,billets,blooms and
slabs for re-rolling into steel for general structural
purposes (Superseding IS 6914)
Carbon steel billets, blooms and slabs for re-rolling
into structural steel (ordinary quality)
Mild steel for metal arc welding electrodes
Grain orinted electrical steel sheets and strips
Structural steel for construction of hulls of ships
Steel for the manufacture of volute and helical
springs (for railway rolling sto9k)
Mild steel rivet bars for shipbuilding
Code of practice for packaging of steel and steel
products for export purposes
Steel for the manufacture of volute, helical and
laminated springs for automotive suspension
Steel for marine boilers, pressure vessels and welded
machinery structures
Steel for naval purposes
Mild steel wires, formed wires and tapes for
armouring of cables
Steel for spring washers
Steel for the manufacture of laminated springs
(railway rolling stock) Part 1 Flat Sections
Steel wire for umbrella ribs
Steel wire for office staples, pins and clips
Part 2 Oil hardened and tempered spring steel wire
and valve spring wire-unalloyed
Part 3 Oil hardened and tempered steel wiresalloyed
Part 4 Stainless spring steel wire for normal
corrosion resistance
Bead wire for tyres
Wire rod for the manufacture of aluminized steel
core wire for aluminium conductors
Hot rolled steel plates,sheets,strips and flats for
flanging and forming oper ation-Specification
Aluminized steel wire for telegraph and telephone
purposes
Steel wire for spokes
Cast billet ingots and continuously cast billets for
rolling into structural steel : oartdinary quality
Steel for electrically welded round link chains
Cold rolled medium, high carbon and low alloy steel
IS 7283
IS 7557
IS 7887
IS 7904
IS 8055
IS 8563
IS 8051
IS 8052
IS 8053
IS 8056
IS 8057
IS 8510 : Part 1
to 3
IS 8564
IS 8565
IS 8566
IS 8910
IS 8917
IS 8951
IS 8952
IS 9442
IS 9467
IS 9468
IS 9476
IS 9550
strip for general engineering purposes
Hot rolled bars for production of bright bars and
machined parts for enginner ing applications
Steel wire : uartto 20 mm for the manufacture of
cold forged rivets
Mild steel wire rods for general engineering
purposes
High carbon steel wire rods
Steel ingots and billets for the production of spring
washers
Half round mild steel wire for the manufacture of
split pins
Steel ingots and billets for the production of volute,
helical and laminated springs for automotive
suspension
Steel ingots,billets and blooms for the production of
volute and helical and laminated springs : fartr
railway rolling stock (Superseding IS 8054:1976)
Steel ingots and billets for the production of steel
wire for the manufacture of wood screws
Steel ingots and billets for the production of hard
drawn steel wire for upholstry springs
Steel ingots and billets for the production of wire rod
for the manufacture of machine screws : bart cold
heading process
Tinned steel wire for banding of armatures and
rotors
Steel wire for nipples for spokes
Heald wire
Steel wire for reeds
General technical delivery requirements for steel and
steel products
Steel plates for galvenizing pots
Steel ingots and billets for production of carbon steel
wire rods
Steel ingots,blooms and billets for production of
mild steel wire rods for generl engineering purposes
Hot rolled steel plates, sheets and strips for
manufacture of agricultural tillage discs
Steel ingots and billets for production of rivet bars
for structural purposes
Steel ingots and billets for production of mild steel
rivet bars for ship building
Cold rolled steel strips for carbon steel razor blades
Bright bars
IS 9962
IS 10206
IS 9477
IS 9485
IS 10794
IS 11513
IS 11587
IS 12262
IS 13566
IS 13954
IS 13955
IS 14246
IS 14491
IS 1171
IS 1466
IS 1467
IS 1468
IS 1469
IS 1470
IS 1471
IS 2021
IS 2022
IS 2023
IS 2301
IS 2391
IS 2782
IS 3011
IS 3012
IS 3013
IS 3014
IS 4182
IS 4409
IS 5633
IS 5634
IS 7148
IS 7965
IS 11945
IS 13164
IS 1230
Steel wires for needles
Methods of sampling steel wires
Steel ingots and billets for hot rolled bars for the
production of bright bars
Cold-reduced and hot-rolled carbon steel sheet for
porcelain enamelling
Mild steel wire for cottor pins
Hot-rolled carbon steel strip for cold rolling purpose
Structural weather resistant steels
Trapezoidal steel wires for spring washers
Recommended practice of pickling by H2SO4
levelling and oiling of LPG sheets
Double cold-reduced electrolytic tinplate sheet
Double cold reduced electrolytic tinplate coil for
subsequent cutting into sheets
Continuously pre-painted galvanised steel sheets and
coils
Low carbon high strength cold rolled steel sheets
and coils for cold forming
Ferromanganese
Ferrovanadium
Ferrotungsten
Ferrotitanium
Ferromolybdenum
Silicomanganese
Ferrophosphorous
Metallic manganese
Calcium silicon
Metallic chromium
Metallic silicon
Foundry nickel
Primary nickel
Ferrosilicozirconium
Chromemanganese
Ferroboron
Ferroniobium (Ferrocolumbium)
Misch metal
Ferronickel
Vanadium pentoxide
Molybdenum oxide (technical)
Ferro alloys for welding industry
Niobium (Columbium)
Charge chrome
Ferrosilicomagnesium
Cast iron rainwater pipes and fittings
IS 1536
IS 1537
IS 1538
IS 1865
IS 1879
IS 2749
IS 3005 : Part 1
IS 3005 : Part 2
IS 3005 : Part 3
IS 3005 : Part 4
IS 3355
IS 3486
IS 3516
IS 3896 : Part 1
IS 4771
IS 6331
IS 6629
IS 7520
IS 3896 : Part 2
IS 3989
IS 5519
IS 5531
IS 5787
IS 5788
IS 6163
Centrifugally cast (spun) iron pressure pipes for
water, gas and sewage
Vertically cast iron pressure pipes for water, gas and
sewage
Cast iron fittings for pressure pipes for water, gas
and sewage
Iron castings with spheroidal or nodular graphite
Malleable cast iron pipe fittings
Austenitic iron castings
Part 1 Bottom stools for large size ingot mould
weighing 8 tonnes and higher
Part 2 Grey cast iron ingot moulds of mass more
than 8 tonnes
Part 3 Grey cast iron ingot moulds of mass more
than one tonne and up to 8 tonnes
Part 4 Grey cast iron ingot moulds of mass up to 1
tonne
Grey iron castings for elevated temperatures for nonpressure containing parts
Cast iron spigot and socket drain pipes
Cast iron pipe flanges and flanged fittings for
petroleum industry
CCCCCCCCCComparison of Indian and overseas
standards for iron castings Part 1 Grey iron castings
Abrasion-resistant iron castings
Automotive grey iron castings
Cast iron rolls
Corrosion resistant high silicon iron castings
CCCCCCCCCComparison of Indian and overseas
standards for iron castings Part 2 Spheroidal
Graphite Iron Castings
Centrifugally cast (spun) iron spigot and socket
soil,waste and ventilating pipes, fittings, and
accessories
Deviations for untoleranced dimensions and mass of
grey iron castings
Cast iron specials for asbestos-cement pressure pipes
for water, gas and sewage
Spheroidal or nodular graphite iron castings for
paper mill dryer rolls
Iron castings with spheroidal or nodular graphite for
pressure containing parts for use at elevated
temperatures
Centrifugaly cast (spun) iron low pressure pipes for
water, gas and sewage
IS 6418
IS 7181
IS 7925
IS 8329
IS 8349
IS 8350
IS 8794
IS 9321
IS 9523
IS 10207
IS 11606
IS 13502
IS 10292
IS 10299
IS 12987
IS 12988
IS 13382
IS 14329
IS 617
IS 734
IS 736
IS 737
IS 738
IS 739
Cast iron and malleable cast iron flanges for general
engineering purposes
Horizontally cast iron double flanged pipes for
water, gas and sewage
Low alloy types of abrasion resistant iron castings
Centrifuglly cast (spun) ductile iron pressure pipes
for water, gas and sewage
Deviations for untoleranced dimensions of malleable
iron castings
Deviations for untoleranced dimensions of
spheroidal or nodular graphite iron castings
Cast iron detachable joints for use with asbestos
cement pressure pipes
Material for alloy cast iron valve seat inserts
Ductile iron fittings for pressure pipes for water,gas
and sewage
Methods of sampling grey iron and malleable iron
castings
Methods of sampling cast iron pipes & fittings
Pig iron
Dimensional requirements for rubber sealing rings
for C.I.D. joints in asbestos cement piping
Cast iron saddle pieces for service connection from
asbestos cement pressure pipes
Cast iron detachable joints for use with asbestos
cement pressure pipes (light duty)
Dimensional requirements for rubber sealing rings
for CID joints in asbesos cement piping for light
duty AC pipes
Cast iron specials for mechanical and push-on
flexible joints for pressure pipe lines for water, gas
and sewage - Specification
Malleable iron castings
Aluminium and aluminium alloy ingots and castings
for general engineering purposes (Superseded IS
20:1977)
Wrought aluminium and aluminium alloys,forging
stock and forgings for general engineering purposes
Wrought aluminium and aluminium alloy plate for
general engineering purposes
Wrought aluminium and aluminium alloy sheet and
strip for general engineering purposes
Wrought aluminium alloys, drawn tube for general
engineering purposes
Wrought aluminium and aluminium alloy wire for
general engineering purposes
IS 740
IS 1253
IS 1254
IS 2047
IS 2067
IS 2525
IS 2676
IS 1284
IS 1285
IS 1820
IS 2304
IS 2479
IS 2590
IS 2673
IS 2677
IS 2678
IS 3420
IS 3436
IS 3577
IS 3704
IS 3965
IS 4026
IS 5047 : Part 1
IS 5052
IS 5484
Wrought aluminium and aluminium alloy rivet stock
for general engineering purposes
Aluminium for use in iron and steel manufacture
Corrugated aluminium sheet
Aluminium alloy hardeners (Master alloys)
Wrought aluminium wire for electrical purposes
Dimensions for wrought aluminium and aluminium
alloys, wire
Dimension for wrought aluminium and aluminium
alloy sheet and strip
Wrought aluminium alloy bolt and screw stock for
general engineering purposes
Wrought aluminium and aluminium alloy extruded
round tube and hollow sections (for general
engineering purposes)
Recommended shapes and sizes for aluminium
notched bars and ingots for remelting purposes
Procedure for inspection and testing of light metals
(aluminium and magnesium) and their alloy ingots
and castings for aircraft purposes
Colour code for the identification of aluminium and
aluminium alloys for general engineering purposes
Primary aluminium ingots for remelting for general
engineering purposes
Dimensions for wrought aluminium and aluminium
alloys, extruded round tube
Dimensions for wrought aluminium and aluminium
alloys, plates and hot rolled sheets
Dimensions and tolerances for wrought aluminium
and aluminium alloy drawn round tube
Procedure for inspection and testing of aluminium
alloy sheets and strips for aircraft purposes
Aluminium clad aluminium alloy sheet and strip for
aircraft purposes (Alloy 24345)
Wrought aluminium and aluminium alloys rivet, bolt
and screw stock - Dimensions and tolerances
Methods for sampling of light metals and their alloy
products
Dimensions for wrought aluminium and aluminium
alloy bar, rod and section
Aluminium ingots billets and wire bars (EC grade)
Part 1 Unwrought and wrught metals
Aluminium and its alloys - Temper designations
EC grade aluminium rod produced by continuous
casting and rolling
IS 5047 : Part 2
IS 5047 : Part 3
IS 5082
IS 6051
IS 6477
IS 6694
IS 7092 : Part 1
IS 7092 : Part 2
IS 7428
IS 7429
IS 7670
IS 7674
IS 7793
IS 7882
IS 7883
IS 7902
IS 9612
IS 9997
IS 10257
IS 11890
IS 8474
IS 8513
IS 8514
IS 8560
IS 8561
Part 2 Plant and operations, thermal treatment,
control and testing, finishing
Part 3 Geometric properties and toolerances,
structural and surface defects
Wrought aluminium and aluminium alloy bars, rods,
tubes and sections for electrical purposes
Code for designation of aluminium and its alloys
Dimensions for wrought aluminium and aluminium
alloys, extruded hollow section
Magnesium ingot for remelting
Part 1 Welded tubes
Part 2 Extruded tubes
Aluminium alloy extruded bars, rods and sections
(for aircraft purposes) (Alloy 24345)
Procedure for inspecction and testing of aluminium
and aluminium alloy extruded bars, rods and
sections (for aircraft purposes)
Aluminium alloy forging stock and forgings (for
parts operated at elevated temperatures) for aircraft
purposes (Alloy 22588)
Procedure for inspection and testing of aluminium
and aluminium alloy forging stock and forgings for
aircraft purposes
Aluminium alloys for IC engine pistons
Aluminium alloy sheet and strip for aircraft purposes
(Alloy 19000)
Aluminium-manganese sheet and strip for aircraft
purposes (Alloy 31000)
Aluminium alloy forging stock and forgings for
aircraft purposes (Alloy 24345)
Aluminium tubes for refrigeration purposes
Aluminium alloy redraw rods for electrical purposes
Aluminium foil stock
High purity aluminium ingot for remelting for
special applications
Procedure for inspection and testing of aluminium
and aluminium alloy wires (for rivets) for aircraft
purposes
Aluminium alloy wire for cold forged rivets for
aircraft purposes (Alloy 55000)
Aluminium alloy wire for cold forged rivets for
aircraft purposes (Alloy 24530)
Aluminium clad aluminium alloy sheet and strip for
aircraft purposes (Alloy 24530)
Aluminium alloy clad sheet and strip for aircraft
purposes (Alloy 76528)
IS 8936
IS 8937
IS 8938
IS 10259
IS 11804
IS 11998
IS 28
IS 288
IS 306
IS 410
IS 531
IS 613
IS 1264
IS 1458
IS 1550
IS 1897
IS 1545
IS 1972
IS 2283
IS 2305
IS 2376
IS 2378
IS 2451
IS 2704
IS 2768
IS 2826
IS 3051
IS 3052
IS 3167
IS 3288 : Part 1
Aluminium alloy for wire for cold forged rivets for
aircraft purposes (Alloy 24350)
Aluminium alloy wire for cold forged rivets for
aircraft purposes (Alloy 22500)
Aluminium alloy wire for cold forged rivets for
aircraft purposes(Alloy 24345)
General conditions for delivery and inspection of
aluminium and aluminium alloy products
Code of practice for manufacture of aluminium alloy
pressure die castings
Aluminium for the manufacture of alloys for IC
engine pistons
Phosphor bronze ingots and castings
Arsenical copper rods for boiler stay bolts and rivets
Tin bronze ingots and castings
Cold rolled brass sheet, strip and foil
Leaded brass strips for instrument parts
Copper rods and bars for electrical purposes
Brass gravity die castings (ingots and castings)
Railway bronze ingots and casting
Copper sheet and strip for utensils and for general
purposes
Copper strip for electrical purposes
Solid drawn copper and copper alloy tubes for
condenser and heat exc hangers - Specification
Copper plate, sheet and strip for industrial purposes
Nickel silver sheet, strip and foil
Method for mercurous nitrate test for copper and
copper alloys
Colour code for the identification of copper &
copper alloys
Code for designation of copper and copper alloys
Nickel silver ingots and castings for cutlery and
hollow-ware
Brass wires for cold-headed and machined parts
Copper alloy strip for bullet envelope
Dimensions and tolerances for copper and copper
alloy rods and bars for general engineering purposes
Dimensions and tolerances for wrought copper and
copper alloy plate
Dimensions and tolerances for wrought copper and
copper alloy sheet, strip and foil for general
engineering purposes
Cap copper alloy strip
art 1 Materials
P
IS 3288 : Part 2
P
IS 3288 : Part 3
P
IS 3288 : Part 4
P
IS 3288 : Part 5
P
IS 3288 : Part 6
P
IS 3288 : Part 8
P
IS 3331
IS 3487
IS 3288 : Part 7
P
IS 4076
IS 4131
IS 4170
IS 4171
IS 4412
IS 4413
IS 4519
IS 5053
IS 5493
IS 5743
IS 5744
IS 5885
IS 6243
IS 6912
IS 7608
IS 7811
IS 7814
IS 8328
IS 8362
IS 8364
art 2 Unwrought form and cast form
art 3 Wrought forms
art 4 Processing
art 5 Heat treatment
art 6 Finishes
art 8 Packing
Copper and brass strips/foils for radiator cores
Copper-Cold rolled strip and foil for gaskets,
washers and eyelets
art 7 Dimensional surfaces and structural
characterstics
Hard brass wires for springs and other special
purposes
Nickel copper alloy castings
Brass rods for general engineering purposes
Copper rods and bars for general engineering
purposes
Copper wires for general engineering purposes
Brass wires for general engineering purposes
Dimensions for copper commutator bars
Dimensions for wrought copper and copper alloy
rods for fasteners
Dimensions for wrought copper and copper alloy
tubes
Copper master alloys Copper alloy screwed ferrules for condenser, heater
and cooler tubes
Copper for commutator bars
Method of hydrogen embrittlement test for copper
Copper and copper alloy forging stock and forgings
Phosphor bronze wire for general engineering
purposes
Phosphor bronze rods and bars
Phosphor bronze sheet and strip
Free cutting copper bars, rods and sections
Copper and copper alloy rolled plates for condensers
and heat exchangers
Free cutting brass wire
IS 8365
IS 8631
IS 8859
IS 9682
IS 9713
IS 9805
IS 9861
IS 10569
IS 10709
IS 10710
IS 10723
IS 10742
IS 10757
IS 10773
IS 11109
IS 12228
IS 12444
IS 12558
IS 14340
IS 25
IS 26
IS 193
IS 209
IS 404 : Part 1
IS 404 : Part 2
IS 405 : Part 1
IS 405 : Part 2
IS 713
IS 742
IS 1339
IS 1357
IS 1654
IS 1655
IS 1921
IS 2258
IS 3717
Copper alloys for spot and seam resistance welding
electrodes
Copper base alloys for marine propellers
Cast copper tuyere
Recommended procedure for inspection of cast
copper tuyeres
Hot rolled electrolytic copper wire rod for electrical
conductors
High conductivity copper castings
Dimensions for wrought copper and copper alloy
wires for general engineering purposes
Aluminnium bronze rods and bars
Brass wires for fourdrinier cloth
Phosphor bronze wires used for fourdrinier cloth
Aluminium silicon bronze rods and bars
Cast gun metal rods and bars
Nickel silver rods and bars
Copper tubes for refrigeration purposes
Silicon brass ingots and castings
Method for scale adhesion test for oxygen free
copper
Continuously cast and rolled electrolytic copper wire
rods for electrical conductors
Recommended shape, size and mass of copper and
copper alloy ingots for remelting purposes
Brass for current carrying parts in electrical wiring
accessories
Antifriction bearing alloys
Tin ingot
Soft solder
Zinc ingot
Part 1 For other than chemical purposes
Part 2 For chemical purposes
Part 1 For chemical industries
Part 2 For other than chemical purposes
Zinc base alloy ingots for die casting
Zinc base alloy die castings
Lead and lead alloys for sheathing of electric cables
Printing type metal ingots
Lead antimony alloys
Zinc alloys - Code of practice for manufacture of
pressure die castings
Rosin-cored solder wire
Rolled zinc plate, sheet and strip
Refined secondary lead
IS 4280
IS 4699
IS 5479
IS 6344
IS 8439
IS 8475
IS 11516
IS 12447
IS 13229
IS 13923
IS 13982
IS 1417
IS 1418
IS 1953
IS 2112
IS 2270
IS 2271
IS 2275
IS 2279
IS 2767
IS 3088
IS 3095
IS 2790
IS 3096
IS 3111
IS 3112
IS 3541
IS 3571
IS 3610
IS 4134
IS 4705
IS 4799
IS 5954
IS 6018
IS 6019
IS 6170
IS 6683
Refined secondary tin ingot
Refined secondary zinc
Solders for jointing aluminium and aluminium
alloys
Cadmium metal
Methods for sampling of lead and lead alloys
Lead based antifriction bearing alloy for heavy duty
applications
Soft solder for electronic applications
Zinc wire for sprayed zinc coatings
Zinc for galvanizing
Lead seal
Zinc Alloy for Hot Dip Coatings- Zinc-5 Percent
Aluminium- Mischmetal Alloy- Specification
Grades of gold and gold alloys
Method for assaying of gold in gold and gold alloys
Methods of chemical analysis of silver anodes
Grades of silver and silver alloys
Method for assaying of platinum and platinum alloys
Recommended method for spectrographic analysis
of platinum
Grades of platinum
Fine silver bar, sheet, wire, granules and token
Gold thread (silver base)
Method for assaying of fine grade palladium
Guidelines for the manufacture of solders for use in
goldware
Guidelines for manufacture of 23.3, 22, 21, 18, 14,
12 and 9 carat gold
Fine grade palladium
Silver thread
Gold and silver embroidery materials
Code of practice for manufacture of 23.3 and lower
carat gold alloys
Dental gold solders
Dental gold foil
Recommended colour classification of rough
diamonds
Dental mercury
Dental casting gold alloys, non-porcelain bonding
Dental white gold alloys
Platinum, platinum rhodium catalyst gauges
Platinum dish
Platinum crucible and lid
Diameters of wires for platinum group metals and
IS 6882
IS 6889
IS 6890 : Part 1
IS 6890 : Part 2
IS 7225
IS 7255 : Part 1
IS 7255 : Part 2
IS 7562
IS 8844
IS 8929
IS 9443
IS 8858
IS 9925
IS 12144
IS 13600
IS 812
IS 813
IS 814
IS 817
IS 817 : Part 1
IS 817 : Part 2
IS 822
IS 1179
IS 1278
IS 1393
IS 1395
IS 2927
IS 3016
their alloys
Platinum electrodes
Method for chemical analysis of silver tin dental
amalgam alloy
Method for chemical analysis of dental gold alloys
Part 1 Determination of gold, silver, palladium and
platinum
Part 2 Determination of nickel and zinc
Dental cobalt chromium casting alloy
Methods of chemical analysis of solders for use in
goldware Part 1 Determination of gold, silver and
copper
Part 2 Determination of cadmium and zinc by
polarographic method
Gold cladding
Guidelines for marking purity of gold on gold
articles/ornaments
High purity gold wire for electrical contacts
Guidelines for marking purity of silver on silver
articles/ornaments
Methods for spectrographic analysis of fine silver
ingot (grades 9999 and 999)
Method for determination of gold and silver in gold
and silver thread and embroidery materials
Fine silver wire for electrical contacts
Chemical analysis of silver palladium alloys
Glossary of terms relating to welding and cutting of
metals
Scheme of symbols for welding
Covered electrodes for manual metal arc welding of
carbon and carbon manganese steel
Code of practice for training and testing of metal arc
welders
Part 1 Manual metal arc welding
Part 2 Oxyfuel welding
Code of procedure for inspection of welds
Equipment for eye and face protection during
welding
Filler rods and wires for gas welding
Code of practice for training and testing of oxy
acetylene welders
Low and medium alloy steel covered electrodes for
manual metal arc welding
Specification for brazing alloys
Code of practice for fire precautions in welding and
IS 3600 : Part 1
IS 3600 : Part 2
IS 3600 : Part 3
IS 3600 : Part 6
IS 3600 : Part 7
IS 3600 : Part 8
IS 3600 : Part 4
IS 3600 : Part 5
IS 3600 : Part 9
IS 3613
IS 4943
IS 4972
IS 5206
IS 5511
IS 5687
IS 5856
IS 5857
IS 5897
IS 5922
IS 6016
IS 6419
IS 6560
IS 7280
IS 7303
IS 7318 : Part 1
IS 7318 : Part 2
IS 6901
cutting operations
Part 1 Cruciform fillet weld tensile test
Part 2 Beam impact (charpy V-notch) test
Part 3 Transverse tensile test on butt welds
Part 6 Transverse side bend test on butt welds
Part 7 Longitudinal root and face bend test on butt
welds
Part 8 Nick break test and fillet weld fracture test
Part 4 Longitudinal tensile test on cylindrical weld
metal test pieces on butt welds
Part 5 Transverse root and face bend test on butt
welds
Part 9 Macro and micro examination
Acceptance tests for wire flux combination for
submerged arc welding
Assessment of butt and fillet fusion welds in steel
sheet, plate and pipe
Resistance spot welding electrodes
Covered electrodes for manual metal arc welding of
stainless steel and other similar high alloy steels
Covered electrodes for manual metal arc welding of
cast iron_
Glossary of terms relating to welding of plastics
Corrosion and heat resisting chromium-nickel steel
solid welding rods, bare electrodes
Nickel and nickel alloy bare solid welding rods and
electrodes
Aluminium and aluminium alloy welding rods and
wires and magnesium alloy welding rods
Qualifying tests for welders engaged in aircraft
welding
Hose connection for welding and cutting equipment
Welding rods and bare electrodes for gas shielded
arc welding of structural steel
Molybdenum and chromium-molybdenum low alloy
steel welding rods and bare electrodes for gas
shielded arc welding
Bare wire electrodes for submerged arc welding of
structural steels
Covered electrodes for surfacing of metal by manual
arc welding
Part 1 Fusion welding of steel
Part 2 TIG or MIG welding of aluminium and its
alloys
Specification for pressure regulators for gas
IS 7273
IS 7307 : Part 1
IS 7653
IS 8363
IS 8484
IS 8666
IS 8736
IS 9495
IS 10793
IS 10803
IS 10811
IS 11368 : Part 1
IS 11802
IS 1261
IS 3023
IS 6916
IS 8002
IS 13007
IS 13851
IS 816
IS 1024
IS 1323
IS 2812
cylinders used in welding, cutting and related
processes
Method of testing fusion welded joints in aluminium
and aluminium alloys
Approval tests for welding procedures Part 1 fusion
welding of steel
Manual blow pipes for welding and cutting
Bare wire electrodes for electroslag welding of steels
Metal powders welding electrodes
Copper and copper alloy covered electrodes for
manual metal arc welding
Nickel and nickel alloy covered electrodes for metal
arc welding
Test for brazeability of brazing alloys
Classification of defects in metallic fusion welds
with explanations
Method of sampling and preparation of weld pad for
chemical analysis of weld metal from covered
electrodes for manual metal arc welding
Oxygen and acetylene manifold regulators for
welding, cutting and related processes
Comparison of Indian and overseas classification
and coding of welding filler materials Part 1 Flux
coated mild steel and medium tensile steel electrodes
for manual metal arc welding
Method of determination of diffusible hydrogen
content of deposited weld metal from covered
electrodes in welding mild and low alloy steels
Code of practice for seam welding in mild steel
Recommended practice for building up by metal
spraying
Code of practice for fabrication welding of steel
castings
Recommended procedure for welding of flexible
PVC
Tungston electrodes for inert gas shielded arc
welding and for plasma cutting and welding
Storage and redrying of covered electrodes before
use - recommendations
Code of practice for use of metal arc welding for
general construction in mild steel
Code of practice for use of welding in bridges and
structures subject to dynamic loading
Code of practice for oxy-acetylene welding for
structural work in mild steels
Recommendations for manual tungsten inert gas arc
IS 3525
IS 5139
IS 5530
IS 8004
IS 8455
IS 8987
IS 9006
IS 9417
IS 9524
IS 10801
IS 1405
IS 1449
IS 1999
IS 9595
IS 10178
IS 10186
IS 11991
IS 14289
IS 14419
IS 2109
IS 2245
IS 2246
IS 3191
IS 4156
IS 4166
IS 4574
IS 4763
IS 5442
welding of aluminium and aluminium alloys
Metal arc welding for hull constructions of merchant
ships in carbon and carbon -manganese steels
Repair of cast iron castings by oxy-acetlene and
manual metal arc welding - Recommendations
Recommendations for production rectification and
repair of steel castings by metal arc welding process
Recommended procedure for welding of rigid PVC
Recommended procedure for welding of polythlene
Recommended practice for air carbon arc gauging
and cutting
Recommended practice for welding of clad steels
Recommendations for welding cold worked bars for
reinforced concrete construction
Recommended procedure for repair welding of steel
components by aluminothermic process
Recommended procedure for heat treatment of
welded fabrications
Methods of sampling of iron ores
Methods of sampling of mannganese ore
Methods of sampling bauxite
Metal arc welding of carbon and carbon manganese
steels - Recommendations
CO2 gas shielded metal arc welding of structural
steels - Recommendations
Recommendations for manual tungsten inert gas arc
welding of copper and copper alloys
Recommended practice for flash butt welding of
tubes, rods and other sections in carbon and alloy
steel
Manual tungsten inert gas arc welding of nickel and
nickel alloys - Recommendations
Acceptance standards for radiographic examination
of welds for ships - Recommendations
Methods of sampling of dolomite, limestone and
other allied materias
Methods of sampling quartizite
Methods of sampling of fluorspar (flourite)
Methods of sampling of cryolite and aluminium
trifluoride
Methods for sampling of barytes
Methods of sampling of ilmenite and rutile
Flourspar for use in metallurgical industries
Manganese ore for production of ferromanganese
Classification of haematite iron ore
IS 5534
IS 5893
IS 5953
IS 8562
IS 8624
IS 8625
IS 8167
IS 8604
IS 9101
IS 9592
IS 9660
IS 9959
IS 9963
IS 10345
IS 10346
IS 10816
IS 10817
IS 10818
IS 10819
IS 10823
IS 11211
IS 11281
IS 11282
IS 11321
IS 11607
IS 11690
IS 11894
IS 12394
IS 11283
Method for determination of specific surface area of
powder ore samples
Cryolite for use in aluminium industry for the
aluminium industry
Specification for bauxite for use in the production of
alumina
Methods of sampling chrome ore
Method for determination of swelling index of iron
ore pellets
Determination of crushing strength of iron ore
pellets
Method for determination of reducibility index of
iron ore oxides, lumps oore, sinter and pillets
Determination of compression strength of iron ore
pellets after reduction
Methods of sampling iron ore pellets
Aluminium trifluoride for use in aluminium industry
Guidelines for determination of softening
characteristics of iron ore pellets
Guidelines for iron ore sinters for iron making in
blast furnace
Determination of shatter index of iron ore lumps,
sinter and pellets
Flux grade limestone for use in steel plants
Flux grade dolomite for use in steel plants
Methods of sampling zinc and lead concentrates
Bauxite for refractory industry
Chromite for metallurgical industry
Chromite for refractory industry
Methods for determination of thermal degradation
index(TDI) and reduction degradation index(RDI) of
iron oxides:lump ore,sinter and pellets Section 1
Static degradation test Section 2 Dynamic
degradation test
Methods of sampling rock phosphate
Manganese ore for the production of iron and steel
making
Guidelines for laboratory pot-grate sintering test for
iron ore fines
Graphite for graphite crucibles
Methods of sampling iron ore sinters
Methods of moisture determination of iron ore lot
Classification of magnetite iron ores,
Method for Weathering test on iron ore sinter
Determination of softening point of iron oxides (in
IS 11292
IS 11336
IS 11348
IS 11373
IS 11895
IS 11896
IS 11897
IS 12550
IS 13054
IS 13344
IS 13676
IS 13751
IS 14296
IS 14301
IS 14302
IS 1280
IS 1305
IS 1752
IS 1811
IS 1918
IS 1987
IS 3339
IS 3343
IS 4140
IS 4269
IS 4475 : Part 1
S
IS 4475 : Part 2
C
IS 4475 : Part 3
P
IS 4475 : Part 4
powder form):lump ore,sinterand pellets
Determination of relative reducibility of iron
oxides:lump ore,sinter and pellets
Guidelines for heat hardened iron ore pellets for iron
making in blast furnaces
Iron ore pellets - Apparent specific gravity, true
specific gravity and porosity - Method for
determination apparent
Guidelines for laboratory disc pelletisation test for
iron ore pellets
Classification of manganese ore, ferruginous
manganese ore, silicious manganese ore and
mananiferrous iron ore
Determination of apparent specific gravity, true
specific gravity and apparent porosity of iron ore
lump and sinter
Guidelines for methods to be adopted for
minerelogical identification of iron oxides: lump ore,
sinter and pellets
Methods of determining particle size distribution of
iron ore fines
Quartzite/quartz for the production of ferroalloys
Method for checking the bias of sampling of ores
Quartzite foor iron making in blast furnace
Tungsten for hard metal industry
Dolomite for refractory industry
Kyanite for refractory industry
Beach sand silimanite for refractory industry
Foundry moulding boxes of steel construction
Graphite for use in foundry coatings
Coal dust for use in cast iron foundry
Methods of sampling foundry sands
Methods of physical tests for foundry sands
High silica sand for use in foundry
Silica flour for use in foundries
Natural moulding sand for use in foundries
Limestone for use in foundries
Dextrin for use in foundries
traight/taper sided geared ladles 0.25 to 10 tonnes
for iron and steel foundries
ylindrical geared ladles 0.25 to 3.0 tonnes for iron
foundries
art 3 Straight/taper sided ladles 0.25 to 3.0 tonnes
capacities for S.G. Iron foundries
art 4 Taper sided non geared ladles 15 to 50 tonnes
P
IS 4604
IS 4606
IS 4683
IS 4981
IS 4982
IS 5032
IS 5303
IS 5824
IS 5841
IS 5850
IS 5873
IS 5904
IS 5981
IS 5988
IS 6013
IS 6366
IS 6376
IS 6377
IS 6401
IS 6443
IS 6447
IS 6482
IS 6773
IS 6788
IS 7295
IS 7297
IS 7547
IS 8228
IS 8246
IS 8250
IS 8779
IS 8785
IS 8939
IS 8988
IS 9007
IS 9008
IS 9009
IS 9139
IS 9630
capacities for iron and steel foundries
Pattern plates for machine moulding boxes
Steel shots for use in foundries
Chilled iron shot and grit for use in foundries
Guide pins for foundry pattern plates
Closing pins for foundry moulding boxes
Recommended sizes of cupola furnace for foundry
Zircon flour for use in foundries
Lancets for use in foundries
Flutted core cleaners for use in foundries
Star (triangular) cutters for use in foundries
Steel cut-wire shots for use in foundries
Steel chaplets for use in ferrous foundries
Sleekers for use in foundries
Spring dowel sleeves (light and heavy patterns) for
use in foundries
Trowels for use in foundries
Sprue plugs for use in foundries
Pattern lifting pins and hooks for use in foundries
Mellets for use in foundries
Dowel pins for use in foundries
Lifters and cleaners for use in foundries
Vent wires for use in foundries
Tempers and rammers for use in foundries
Sodium silicate for use in foundries
Chromite sand for use in foundries
Chamotte
Olivine sand and flour for use in steel foundries
Steel Nails used as internal chills in steel castings
Bauxite sand
Liquid resins for use in shell process in foundries
Foundry parting agents
Core gums (sodium silicate based) for use in
foundries
Carbon dioxide core binder system (binder and
breakdown agent) for use in foundries
Code of practice for use of oxygen in Iron Steel,and
non-ferrous metal foundries
Bauxite powder for foundry washes
Zircon sand for use in foundries
Core repairing paste for use in foundries
Foundry core oils
Malleable iron shots and grits for use in foundries
Recommended practices for production of
spheroidal graphite iron
IS 9674
IS 10032
IS 10033
IS 10034
IS 10091
IS 10094
IS 10214
IS 10469
IS 10487
IS 10498
IS 10504
IS 10518
IS 10979
IS 11099
IS 11266
IS 12006
IS 12272
IS 12424
IS 12446
IS 12799
IS 13100
IS 13126
IS 8
IS 1292
IS 1523
IS 1525
IS 1526
IS 1528 : Part 2
IS 1528 : Part 1
IS 1528 : Part 3
IS 1528 : Part 4
IS 1528 : Part 5
IS 1528 : Part 6
IS 1528 : Part 7
IS 1528 : Part 9
IS 1528 : Part 10
IS 1528 : Part 11
IS 1528 : Part 12
Test Methods for fluid self hardening sand
Organic no bake binders for use in foundries
Zircon and Graphite based core and mould washes
Basic requirement for equipment for determining
moisture content in foundry sand
Iron oxide powder for use in foundries
Code of practice for pattern making by using
expanded polystyrene material
Methods of sampling bentonite
Antipiping compound for foundry
Sand rammer
Apparatus for determining permeability of foundry
sand
Exothermic feeding aid for foundry
Snap flask moulding boxes and jackets
Powder resins for use in shell process in foundries
Universal sand testing machines
Flake resins for use in shell process in foundries
Metal pattern and epoxy resin pattern equipment for
foundries
Divided blast cupola furnace
Hot box resin for use in foundries
Bentonite for use in foundries
Recommended practice for impregnation of castings
Pitch powder for use in cast iron foundry
Silicon carbide chills
High heat duty fireclay refractories
Silica mortar for laying silica bricks in furnaces
Bottom pouring refractories for steel plants
Ladle refractories for steel plants
Sizes and shapes for firebricks
Determination of refractoriness under load
Determination of pyrometric cone equivalent (PCE)
or softening point
Determination of spalling resistance
Determination of cold crushing strength
Determination of modulus of rupture at ambient
temperature
Determination of permanent change after reheating
Method of sampling and criteria for conformity
Determination of true specific gravity and true
density
Determination of size of refractory bricks
Determination of warpage
Determination of bulk density
IS 1528 : Part 13
IS 1528 : Part 14
IS 1528 : Part 15
IS 1528 : Part 16
IS 1528 : Part 17
IS 1528 : Part 18
IS 1528 : Part 19
IS 1529
IS 1748
IS 1749
IS 1750
IS 1751
IS 2042
IS 2043
IS 2044
IS 3304
IS 3305
IS 4564
IS 4565
IS 4812
IS 4813
IS 5495
IS 6727
IS 6728
IS 7199
IS 8953
IS 8966
IS 8977
IS 9010
IS 9929
IS 9930
IS 10047
Determination of resistance to the disintegration
effect of carbon monoxide
Sieve analysis
Method for determination of bulk density, apparent
porosity and true porosity of dense shaped refractory
materials
Determination of thermal conductivity upto 1250
degree C of dense and insulating refractory products
according to the hot wire parallel method
Determination of cold crushing strength of shaped
insulating refractory products
Determination of creep in compression
Determination of thermal expansion
Blast furnace refractories for steel plants
Sizes of graphite crucibles
Burnt magnesite refractories
Dead burnt pea magnesite
Fireclay cupola refrectories
Insulating bricks
Siliceous fireclay refreatories
Silimanite refractories for glass melting tank
furnaces
Burnt magnesite-chrome refractories for general
purposes
Burnt chrome-magnesite refractories for general
purposes
Fireclay nozzles
Fireclay stoppers
Silica refractories for coke oven
Chemically-bonded chrome-magnesite refractories
for general purposes
Sizes and shapes for firebricks (300 mm and higher
sizes)
Fireclay checker bricks for open hearth furnace
Recuperator tubes, tiles and collars for soaking pits
in steel plants
Blast furnace stove refractories
62 percent alumina bricks and blocks for blast
furnaces
Megnesite nozzles
Clay bonded graphite crucibles
Super heat duty fireclay refractories
Method of determining life of graphite crucibles
Zircon refractories for glass furnace application
Methods for testing refractory ramming masses
IS 10551
IS 10570
IS 10607
IS 11036
IS 11452
IS 13150
IS 13173
IS 13185
IS 14313
IS 14374
IS 14406
IS 14447
IS 963
IS 1570 : Part 1
IS 1570 : Part 3
IS 1570 : Part 4
IS 1570 : Part 7
IS 1870
IS 1871 : Part 2
IS 1875
IS 2004
IS 3261
IS 3445
IS 3479
IS 2611
IS 3739
Zircon mullite refractories for glass furnace
applications
Methods for testing refractory castables
Refractories for cement rotary kilns
Graphite stopper heads
Method of testing air-setting refractory mortars
Silica mortars for laying silica bricks in cooke ovens
Code of practice for handling and usage of graphite
and silicon carbide crucibles
Method of test for determination of drying shrinkage
of refractory mortars
70 percent alumina bricks - specification
Refractories for chimney - Recommendation
Refractories for forge and heat treatment furnaces _
Recommendations
Refractories for use in foundry industry Recommendations
Chrome molybdenum steel bars and rods for aircraft
purposes
Schedules for wrought steels Part 1 Steels specified
by tensile and/or yield properties
Schedules for wrought steels Part 3 Carbon and
carbon manganese free cutting steels
Schedules for wrought steels Part 4 Alloy steels
(Alloy constructional and spring steels) with
specified chemical composition andd mechanical
properties
Schedule for wrought steels Part 7 Steels for
elevated temperature service (creep resistant steels)
Comparison of Indian and overseas standards for
wrought steels for general engineering purposes
Commentary on Indin Standard Schedules for
wrought steels Part 2 Carbon steels (unalloyed
steels) (Complementary to IS 1570 Part 2):1979)
Carbon steel billets, blooms, slabs and bars for
forgings
Carbon steel forgings for general engineering
purposes
Carbon steel forgings for shipbuilding industry
Forged steel rolls
General requirements for steel drop, upset and press
forgings
Carbon chromium molybdenum steel forgings for
high temperature services
Dimensional tolerances for carbon and alloy
IS 3748
IS 3930
IS 4367
IS 4368
IS 4397
IS 4431
IS 4432
IS 5489
IS 5518
IS 5522
IS 5651
IS 6527
IS 6528
IS 6529
IS 6603
IS 6911
IS 7291
IS 7494
IS 8748
IS 9100
IS 9175 : Part 3
IS 9175 : Part 4
IS 9175 : Part 5
IS 9175 : Part 6
IS 9175 : Part 7
IS 9175 : Part 9
IS 9175 : Part 10
IS 9175 : Part 11
IS 9175 : Part 13
IS 9175 : Part 15
IS 9175 : Part 16
IS 9175 : Part 17
IS 9175 : Part 18
IS 9175 : Part 20
IS 9175 : Part 22
IS 9175 : Part 23
IS 9175 : Part 26
IS 9175 : Part 27
IS 9175 : Part 28
IS 9175 : Part 30
IS 9175 : Part 31
IS 9175 : Part 32
constructional steel products
Tool and die steels (Superseding IS 3749)
Flame and induction hardening steels
Alloy steel forgings for general industrial use
Alloy steel billets, blooms and slabs for forging for
general engineering purposes
Cold rolled carbon steel strip for ball and roller
bearing cages
Carbon and carbon manganese free cutting steels
Case hardening steels
Carburizing steels for use in bearing industry
Steels for die blocks for drop forging
Stainless steel sheets and strips for utensils
Steels for pneumatic tools
Stainless steel wire rod
Stainless steel wire
Stainless steel blooms, billets and slabs for forging
Stainless steel bars and flats
Stainless steel plate, sheet and strip
High speed tool steels
Steel for valves for internal combustion engines
Forged/rolled CTC segments
Methods of sampling steel forgings
25C8 Grade Steel
30C8 Grade Steel
35C8 Grade Steel
40C8 Grade Steel
45C8 Grade steel
11C10S25 Grade steel
14C14S14 Grade steel
25C12S14 Grade steel
40C15S12 Grade steel
37C15 Grade steel
35Mn6Mo3 Grade steel
35Mn6Mo4 Grade steel
15Cr3 Grade steel
20MnCr5 Grade steel
40Cr4Mo3 Grade steel
25Cr13Mo6 Grade steel
16Ni3Cr2 Grade steel
15Ni7Cr4Mo2 Grade steel
40Ni6Cr4Mo3 Grade steel
20Ni7CrMo2 Grade steel
20Ni7Mo2 Grade steel
20NiCrMo2 Grade steel
IS 9175 : Part 33
IS 9175 : Part 34
IS 9516
IS 9683
IS 9684
IS 10604 : Part 1
IS 10631
IS 10632 : Part 2
IS 11952
IS 12145
IS 10604 : Part 2
IS 10632 : Part 1
IS 10632 : Part 3
IS 11169 : Part 1
IS 11169 : Part 2
IS 11185
IS 12146
IS 13352
IS 13387
IS 14331
IS 1030
IS 2644
IS 2708
IS 2856
IS 2986
IS 3444
IS 4491
42Cr6V10 Grade steel
14CrNi6 Grade steel
Heat resisting steel
Carbon and low alloy steel forgings for fired and
unfired pressure vessels
Technical conditions for the supply of hot rolled
billets blooms, slabs and bars for closed die forgings
Machining allowances and tolerances for open die
steel forgings Part 1 carbon and low alloy steel
forgings
Stainless steel for welding electrode core wire
Specific requirements for binding wire
Steels for piston pins (Gudgeon pins)
Quenched and tempered alloy steel forgings for
pressure vessels
Machining allowances and tolerances for open die
steel forgings Part 2 High alloy steel forgings
Non Magnetic stainless steels for electrical
applications Part 1 General requirements
Specific requirements for sheets, strips and plates for
electrical appliances
Steels for cold heading/cold extrusion application
Part 1 Wrought carbon and low alloy steels
Steels forcold heading/cold extrusion Part 2
Stainless steel
Technical supply conditions for hot rolled and
forged steel bars for use in machine tool industry
Carbon manganese steel forgings for pressure
vessels
Stock for forgings produced f rom continuously bast
billets , blooms, slabs and bars - specification
Tool steel forgings for metal forming
Steels for high temperature bolting applications
Carbon steel castings for general engineering
purposes
High tensile steel castings
1.5 Percent manganese steel castings for general
engineerig purposes
Carbon steel castings for pressure containing parts
suitable for high temperature service (fusion welding
quality)
Steel castings for marine engines and boilers
Corrosion resistant alloy steel and nickel base
castings for general applications
Steel castings for high magnetic permeability
IS 4522
IS 4896
IS 4897
IS 4899
IS 5925
IS 6079
IS 6601
IS 6907
IS 7806
IS 7899
IS 9541
IS 9565
IS 10724
IS 10774
IS 11166
IS 11286
IS 11709
IS 11732
IS 11758
IS 12117
IS 12938
IS 1978
IS 13505
IS 1239 : Part 1
IS 1239 : Part 2
Heat resistant alloy steel and nickel base castings
One percent chromium steel castings for resistance
to abrasion
Deviations on untoleranced dimensions and mass of
steel castings
Ferritic and martensitic steel casting for use at low
temperature
Recommended practice for silver plating for general
engineering purposes
Low alloy cast steel grinding media
Permissible deviations in chemical composition for
products analysis of steel
Method of sampling steel castings
Martensitic and austenitic high alloy steel castings
for high temperature service
Alloy steel castings suitable for pressure services
Cast CTC segments
Acceptance standards for ultrasonic inspection of
steel castings
Acceptancce standard for magnetic particle testing
of steel casting
Specification for corrosion resistant high alloy and
nickel base investment castings for general
applications
Permissible deviations on dimensions, surface
roughness and mass of steel castings made with
investment casting process
Corrosion resistant high alloy steel nickel base and
cobalt base investment castings for severe
applications
Technical delivery conditions for investment
castings of steel
Acceptance standards for dye penetrant inspection of
steel castings
Precipitation hardening stainless steel castings
Norms for classification of steel foundries for
quality assurance
Acceptance standards for radiographic inspection of
steel castings
Line pipe
Centrifugally cast high alloy steel and nickel base
tubing for pressure application at high temperature
Mild steel tubes, tubulars and other wrought steel
fittings, Part 1 Mild steel tubes
Mild steel tubes, tubulars and other wrought steel
fittings, Part 2 Mild steel tubulars and other wrought
IS 1979
IS 2416
IS 3074
IS 3589
IS 3601
IS 3609
IS 4310
IS 4516
IS 4711
IS 4712
IS 4922
IS 4923
IS 5429
IS 5433
IS 5929
IS 6011
IS 6286
IS 6392
IS 6630
IS 6647
IS 6913
IS 7138
IS 7174
IS 8036
IS 8119
IS 9158
IS 9295
IS 10577
IS 11722
IS 12791
steel pipe fittings
High test line pipe
Boiler and supherheater tubes for marine and naval
purposes
Steel tubes for automotive purposes
Seamless or electrically welded steel pipes for water,
gas and sewage (168.3 to 2032 mm outside
diameter)
Steel tubes for mechanical and general engineering
purposes
Chrome molybdenum steel, seamless, boiler and
superheater tubes
Weldable steel pipe fittings for marine purposes
Elliptical mild steel tubes
Methods for sampling of steel pipes, tubes and
fittings
Forged steel,socket-welding fittings
Seamless steel tubes (suitable for welding) for
aircraft purposes
Hollow steel sections for structural use
Dimensions for steel tubes for automotive purposes
Oil well steel casing pipes and couplings
Inspection and testing procedure for circular steel
tubes for aircraft purposes
Carbon steel tubes for use on board ships for
pressure services
Seamless and welded steel pipes for sub-zero
temperature service
Steel pipe flanges
Seamless ferritic alloy steel pipes for high
temperature steam service
Drill pipes for use in oil or natural gas wells
Stainless steel tubes for the food and beverage
industry
Steel tubes for furniture purposes
Carbon steel tubes for use on board ships for
working pressure 0.7 to 1.7 N/mm
Mild steel transformer cooling tubes
Copper brazed steel tubing
Cold-drawn high pressure fluid power cylinder tubes
Steel tubes for idlers for belt conveyors
Lancing pipes
Thin walled flexible quick coupling pipes
High carbon chromium (bearing) steel tubes for the
manufacture of bearing races
IS 13197
IS 1067
IS 1068
IS 1327
IS 1337
IS 1340
IS 1359
IS 1378
IS 1772
IS 1773
IS 1958
IS 1985 : Part 3
IS 1771
IS 1985 : Part 1
IS 1986
IS 1992
IS 2384
IS 2450
IS 2601
IS 2602
IS 2603
IS 2605
IS 2606
IS 2633
IS 2679
IS 3194
IS 3266
IS 3554
IS 3655
IS 3656
IS 3821
Grooved couplings - Specification
Electroplated coatings of silver for decorative and
protective purposes
Eletroplated coatings of nickle plus chromium and
copper plus nickel plus chromium
Methods of determination of mass of tin coatings of
tinplate
Electroplated coatings of hard chromium for
engineering purposes
Code of practice for chromate conversion coating on
zinc and cadmium coated articles and zinc base
alloys
Electroplated coatings of tin
Oxidized-copper finishes
Eletroplated coatings of copper
Electroplated coatings of brass
Nickel anodes for electroplating
Part 3 Iron castings
Electroplated coatings of silver and silver alloys for
general engineering purposes
Recommended practice for preparation of iron and
steel for electroplating Part 1 high carbon steel
Code of practice for hard chromium plating on iron
and steel for general engineering purposes
Electroplated coatings of lead
Tin anodes for electroplating
Recommended practice for plating on aluminium
and its alloys
Brass anodes for electroplating
Cadmium anodes for electroplating
Copper anodes for electroplating
Zinc anodes for electroplating
Alloy lead anodes for chromium plating
Methods for testing uniformity of coating of zinc
coated articles
Recommendations for equipment for electroplating
Recommended practice for cleaning of metals prior
to electroplating
Electroplated coatings of gold for general
engineering purposes
Glossary of terms relating to electroplating
Recommended practice for electroplating
Code of recommended practice for mechanical
polishing of metals for electroplating
Methods for determination of weight of coating on
IS 4252
IS 4759
IS 5905
IS 5528
IS 6009
IS 6012
IS 6057
IS 6159
IS 6586
IS 6651
IS 6697
IS 6745
IS 6910
IS 8038
IS 8375
IS 8376
IS 8435
IS 8508
IS 8602
IS 9530
IS 10209
IS 11857
IS 8554
hot-dip aluminized iron and steel articles
Electroplated coatings of gold for decorative
purposes
Hot-dip zinc coatings on structural steel and other
allied products
Sprayed aluminium and zinc coatings on iron and
steel
Method of testing corrosion resistance of
electroplated and anodized aluminium coating by
copper accelerated acetic acid salt spray (CASS) test
Method for evaluation of results of accelerated
corrosion test
Method for measurement of coating thickness by
eddy current
Hard anodic coatings on aluminium and aluminium
alloys
Recommended practice for design and fabrication of
material prior to galvanizing
Recommended practice for metal spraying for
protection of iron steel
Anodized aluminium for automobile use
Hot-dip aluminium coatings on ferrous parts (other
than sheet,strip and wire) for general purposes
Method for determination of mass of zinc coating on
zinc coated iron and steel articles
Method of testing corrosion resistance of
electroplated and anodized aluminium coatings by
acetic acid salt spray (AAS) test
Method of testing corrosion resistance of metallic
and other non organic coatings by corrodkote test
Method for checking continuity of anodized coatings
Electroplated coatings of nickel plus chromium on
plastics for decorative purposes
Methods for measurement of thickness of metallic
coatings on plastics
Code of practice for hot-dip aluminizing of iron and
steel
Method of tests for chromate coatings on zinc and
cadimium surfaces
Method of testing microhardness of electroplated
coatings
Electroplated coatings of tin-lead alloy (solder)
Anodized wrought aluminium for external ar
chitectural applications
Method of checking insulation of anodized coating
by measurement of break down potential
IS 9531
IS 9838
IS 9839
IS 10173
IS 11268
IS 11759
IS 11812
IS 11826
IS 11864
IS 12393
IS 12860
IS 13147
IS 13177
IS 13212
IS 13647
IS 13677
IS 2417
IS 14126
IS 14149
IS 1182
IS 2478
IS 2598
IS 2953
IS 3415
Recommended practice for preparation of copper
and copper-base alloys for electroplating
Method for determinattion of coating mass per unit
area of conversion coatings on metallic materials by
gravimetric method
Chromate conversion coatings on electroplated zinc
and cadmium coatings
Recommended practice for preparation of zinc alloy
die castings for electroplating
Method for estimation of loss of absorptive power of
anodic oxide coatings after sealing dye spot test with
prior acid treatment for anodized aluminium and its
alloys
Recommended practice for repair of damaged hotdip galvanized coatings
Recommended practice for safeguarding against
warpage and distortion of hot-dipped galvanized
articles
Recommended practice for chemical colouring for
engineering components in general and for bicycle
components
Recommended construction practice of apparatus for
spray cabinet for various salt spray tests
Electroplated coatings of nickel
Method for determination of metallic coating
thickness by X-ray fluoresence technique
Blackoxide coatings on stainless steel parts
Passivation of stainless steel parts
Blackoxide coatings for iron and steel parts
Electroplated coatings of rhodium for engineering
purposes
Electronless nickel - phosphorus coatings
Glossary of terms relating to ultrasonic testing
Metallic coatings - measurement of thickness coulometric method
Metallic and non-metallic coatings - Measurement
of thickness - Beta backscatter method
Recommended practice for radiographic
examination of fusion welded butt joints in steel
plates
Glossary of terms relating to industrial radiography
Safety code for industrial radiographic practice
Glossary of terms used for interpretation of welds
and castings radiographs
Glossary of terms used in magnetic particle flaw
detection
IS 3657
IS 3658
IS 3664
IS 3703
IS 4225
IS 4260
IS 4853
IS 4904
IS 5334
IS 6398
IS 6410
IS 8780
IS 8973
IS 6752
IS 7343
IS 7666
IS 7743
IS 7810
IS 8791
IS 9902
IS 10543
IS 11612
IS 11626
IS 11655
IS 12147
Radiographic image quality indicators
Code of practice for liquid penetrant flaw detection
Code of practice for ultrasonic pulse echo testings
by contact and immersion methods
Code of practice for magnetic particle flaw detection
Recommended practice for straight beam ultrasonic
testing of steel plates
Recommended practice for ultrasonic testing of butt
welds in ferritic steel
Recommended practice for radiographic inspection
of fusion welded butt joints in steel pipes
Calibration blocks for use in ultrasonic nondestructive testing
Code of practice for magnetic particle flaw detection
of welds
Code of practice for eddy current testing of ferrous
seamless pipes and tubes
Specification for magentic flaw detection inks and
powders
Code of practice for non destructive testing of steel
castings
Glossary of terms relating to leak detection
techniques
Code of practice for magnetic particle flaw detection
of ferrous pipes and tubes
Code of practice for ultrasonic testing of ferrous
welded pipes and tubular products
Recommended procedure for ultrasonic examination
of ferritic castings of carbon and low alloy steel
Recommended practice for magnetic particle testing
and inspection of steel forgings
Code of practice for radiographic examination of
resistance spot welds on aluminium and its alloys
Code of practice for ultrasonic flaw detection of
ferritic steel forgings
Recommended practice for leak testing
Method for dry powder magnetic particle testing
Code of practice for eddy current testing of nonferrous seamless pipes and tubes
Recommended practice for ultrasonic testing and
acceptance for forging quality steel blooms
Procedure for stray flux testing of ferrous magnetic
seamless steel tubular products
Recommended practice for wet magnetic particle
examination
IS 12148
IS 12666
IS 12710
IS 12889
IS 4075
IS 7739 : Part 2
IS 7739 : Part 3
IS 7739 : Part 4
IS 13190
IS 13805
IS 4163
IS 7739 : Part 5
IS 7739 : Part 6
IS 7739 : Part 7
IS 7739 : Part 8
IS 7739 : Part 9
IS 7739 : Part 10
IS 7739 : Part 11
IS 7754
IS 8795
IS 8860
IS 9415
IS 10138 : Part 1
IS 10138 : Part 3
IS 11371
IS 12037
IS 13015
IS 13417
IS 12211
Guidelines for requirements for non-destructive
testing agencies
Methods for performance assessment of ultrasonic
flaw detection equipment
Glossary of terms used in accoustic emission testing
Performance evaluation of liquid penetrants
Method for macrostreak flaw test for steel
Electrolytic polishing
Aluminium and its alloys and their examination
Copper and its alloys and their examination
Recommended practice for eddy current
examinationn by rotating probe method of round
steel bars
Guidelines for certification for personnel for non
destructive testing
Method for determination of inclusion content in
steel by macroscopic method
Iron and steel and their examination
Lead and its alloys and their examination
Magnesium and its alloys and their examination
Nickel and its alloys and their examination
Gold, silver, platinum, palladium and their alloys
Tin and its alloys and their examination
Zinc and its alloys and their examination
Method for designation of microstructure of graphite
in cast iron
Method for determining case depth of carburized
steel by fracture test
Code of practice for heat treatment of aluminium
alloys
Method for determination of hardenability and grain
size of tool steels by penetration fracture test
Macroscopic method for determination of nonmetallic inclusion content in wrought steels Part 1
Blue fracture test method
Magnetic particle inspection method
Method for macroetch test for wrought steel
products
Macrographic examination by sulphur print
(Baumann method)
Macroetch testing, inspection and rating of steel
products
Code of practice for heat treatment of steels
Micrographic method for assessing the distribution
of carbides in tool steel and bearing steels using
IS 13484
IS 13605
IS 13691
IS 14598
IS 3531
IS 4180
IS 4777
IS 5555
IS 6005
IS 8062 : Part 1
IS 8062 : Part 3
IS 8062 : Part 4
IS 8221
IS 9077
IS 10117
IS 10493
IS 11232
IS 9172
IS 10221
IS 10461 : Part 1
IS 10461 : Part 2
IS 10471
IS 11579
photomicrographs
Macroetch test for copper alloys
Method for macroetch test for zinc and zinc alloys
Determination of total or effective thicknesses of
thin surfaces hardened layers
Heat treatment of maraging steel - Code of practice
Glossary of terms relating to corrosion of metals
Code of practice for corrosion protection of light
gauge steel sections used in building
Performance tests for protection schemes used in
protection of light gauge steel against corrosion
Code of procedure for conducting field studies on
atmospheric corrosion of metals
Code of practice for phosphating of iron and steel
Code of practice for cathodic protection of steel
structures,Part 1 Genral Princples
Code of practice for cathodic protection of steel
structure,part 3 Ship's hull
Code of practice for cathodic protection of steel
structures ,part 4 Galvanic protection of dockgates,
caissons, piers and jetties
Code of practice for corrosion prevention of metals
and metal components in packages
Code of practice for corrosion protection of steel
reinforcement in RB and RCC construction
Code of practice for passivation of stainless steel
articles
Corrosion protection tests for temporary corrosion
preventives
Chromate conversion coatings on aluminium
Recommended design practice for corrosion
prevention of steel structures
Code of practice for coating and wrapping of
underground mild steel pipelines
Method for determination of resistance to
intergranular corrosion of austenitic stainless steel
Part 1 Corrosion tests in nitric acid medium by
measurement of loss in mass (Huoy test)
Method for determination of resistance to
intergranular corrosion of austenitic stainless steels,
Part 2 copper sulphate / sulphuric acid
test(Monypenny straus test)
Recommended practice for corrosion prevention in
electronic component and assemblies
Recommended practice for chromate conversion
coatings on aluminium
IS 11598 : Part 1
IS 12560
IS 13515
IS 14191
IS 14297
IS 14321
IS 14322
IS 14503
IS 4841
IS 4842
IS 4840
IS 4857
IS 5432
IS 5461
IS 5642
IS 5644 : Part 1
IS 5644 : Part 2
IS 5644 : Part 3
IS 5644 : Part 4
IS 6492
IS 7438
IS 7505
IS 7506
IS 7512
IS 7970
IS 8367
IS 8368
IS 8369
IS 8370
Code of practice for corrosion protection in fertilizer
plants Part 1 Phosphoric acid plant
Code of practice for cathodic protection of heat
exchangers and condensers
Rust converter
Corrosion of Metals and alloys - classification of
corrosivity of atmosphere
Corrosion of metals and alloys - Corrositivity of
atmospheres-Determination of corrosion rate of
standard specimens for the evaluation of corrosivity
Corrosion of metals and alloys - Recommended
values for the corrosivity categories of atmosphlures
Corrosion of Metals and Alloys - Corrosivity of
atmosphere - Measurement of pollution - Methods
Testing of phosphate coatings - Methods
Method for determination of density of sintered
metallic materials
Method for transverse testing of hardmetals
Method for determination of flow rate of metal
powders for powder metallurgical purposes
Metallic powders,excluding powders for hardmetals
- Determination of compactibility (compressibility)
in uniaxial compression
Glossary of terms relating to powder metallurgy
Method for sieve analysis of metal powders
Permeable sintered metal materials - Determination
of density,oil content,and open porosity
Part 1 General guidelines
Part 2 Loss of mass on hydrogen reduction
(hydrogen loss)
Part 3 Hydrogen - Reducible oxygen
Part 4 Total oxygen by reduction extraction
Methods for sampling of powders for powder
metallurgical purposes
Method for test for acid-insoluble content in iron,
copper, tin, and bronze powders
Cobalt powder for hardmetals
Nickel powder
Method for the determination of average particle
size of metal powders by Fisher subsieve sizer
Tantalum powder for capacitors
Tin powder
Tungsten carbide powder for hardmetals
Titanium carbide powder for hardmetals
Iron powder for powder metallurgical aplications
IS 8392
IS 8485
IS 8871
IS 8876
IS 10035
IS 10385
IS 11110
IS 11111
IS 11506
IS 11518
IS 11520
IS 11627
IS 11959
IS 11960
IS 12279
IS 12286
IS 12473 : Part 3
IS 12473 : Part 5
IS 12513
IS 12539
IS 13780
IS 8849
IS 12473 : Part 6
IS 12548
IS 13781
Tungsten powder for hardmetals
Copper powder for powder metallurgical
applications
Metallic Powders - Determination of tap density
Method for the determination of residue on
chlorination of tungsten metal powder
Bronze powder for metallic filters
Method for determination of radial crushing strength
of sintered metal powder bearings
Copper lead powder
Leaded bronze powders
Method for determination of lubricant content of
lubricated metallic powder by Soxhlet extraction
Determination of (the magnetization) coercivity in
hardmetals
Method for metallographic sample preparation of
hardmetals
Method for determination of apparent density of
metallic powders by Scott volumeter
Method for metallographic determination of
microstructure in hardmetals
Methods for metallographic determination of
apparent porosity and uncombined carbon in
hardmetals
Method for determination of transverse rupture
strengh of sintered metal materials (excluding
hardmetals)
Method for determination of abrasive wear
resistance of hardmetals
Part 3 Determination of cobalt,iron ,manganese and
nickel in contents from 0.01 to 0.5 percent (m/m)
Part 5 Determination of cobalt, iron, manganese,
molybdenum, nickel, titanium and vanadium in
contents from 0.5 to 2 percent (m/m)
Determination of cobalt in hardmetals by
potentiometric method
Determination of total carbon in hardmetals by
gravimetric method
Hardmetals - Compression test
Glossary of terms relating to fuel fired industrial
furnaces
Part 6 Determination of chromium in contents from
0.01 to 2 percent (m/m)
Determination of insoluble (free) carbon in
hardmetals by gravimetric method
Permeable sintered metal materials - Determination
IS 13782
IS 13803
IS 9180
IS 9444
IS 9977
IS 10298
IS 11462
IS 12553
IS 12826 : Part 1
IS 12826 : Part 3
IS 14245
IS 14492
IS 11861
IS 11900
IS 11901
IS 11902
IS 11946
IS 11947
IS 12045
IS 12390
IS 12391
IS 12442
IS 12445
IS 12465
IS 12549
IS 12828
of bupple test pore size
Permeable sintered metal materials - Determination
of fluid permeability
Sintered metal materials and hardmetals Determination of young modulus
Recommendatins for performance rating of fuelfired furnaces
Code of practice for installation of oil supply units
for fuel fired furnaces
Design and construction of box type forging
furnaces - Guidelines
Guidelines for design and construction of mould and
core drying ovens for foundries
Mould and core sand dryers rotary type
Code of practice for design,construction,installation
and operation of industrial gas/oil burning
equipment
Code of practice for ordering, testing and acceptance
of industrial furnaces Part 1 purchaser's data sheet
for ordering of industrial furnaces
Part 3 Testing and aceptancce of industrial furnaces
Protective atmosphere for heat treatment furnaces Recommendations
Drying preheating and commissioning of furnace
installations, steam boilers, industrial kilns and
chimneys - Recommendations
Titanium and titanium alloy strip, sheet and plate
Tungsten rods and tungsten wire for lamps and
electron devices
Titanium sponge
Titanium and titanium alloy bars and billets
Soft magnetic iron strips
Soft magnetic iron rods, bars, flats and sections
Alloys used in electrical resistance metallic heating
elements
Iron nickel alloy 36 for ceramic sealing
Iron nickel controlled expansion sealing alloys
Seamless and welded titanium and titanium alloy
tubes for condensers and heat exchangers
Molybdenum plate, sheet, strip and foil
Molybdenum wires for lighting and electronic
application
Iron nickel cobalt sealing alloys
Recommended practice for descaling and cleaning
titanium and titanium alloy surfaces
IS 12882
IS 13350
IS 13351
IS 13795 : Part 1
IS 403
IS 406
IS 440
IS 964
IS 998 : Part 1
IS 998 : Part 2
IS 1047
IS 1345
IS 998 : Part 3
IS 1409
IS 1817
IS 1940
IS 1952
IS 2390
IS 2599
IS 2600 : Part 1
IS 2600 : Part 2
IS 2600 : Part 3
IS 2600 : Part 4
IS 2766 : Part 1
IS 3186
IS 3187
IS 3685
IS 3863
48-Nickel iron soft magnetic strip
Molybdenum rod
Thoriated tungesten wires and rods
Glossary of terms for special alloys Part 1 Soft
magnetic marterials
Methods of chemical analysis of lead and antimonial
lead
Methods of chemical analysis of slab zinc (spelter)
Methods of chemical analysis of copper
Methods for chemical analysis of silver solder
Methods of chemical analysis of solders (soft and
rosin cored) Part 1 Determination of tin and
antimony
Part 2 Determination of iron,copper and arsenic
Methods of chemical analysis of antimony
Methods of chemical analysis of printing metal
Part 3 Determination of cadmium, zinc, aluminium,
bismuth and nickel
Methods of chemical analysis of antifriction bearing
alloys
Methods of sampling non-ferrous metals for
chemical analysis
Methods of chemical analysis of tin ingot
Methods of chemical analysis of nickel anodes
Methods for chemical analysis of foundry nickel
Methods for spectrographic analysis of high purity
zinc and zinc base alloys for die casting
Methods of chemical analysis of zinc and zinc base
alloys for die castings Part 1 Determination of
copper, iron, nickel, tin and thallium by
spectrophotometric method
Part 2 Determination of copper,iron, lead and
cadmium by atomic absorption spectrophotometric
method
Part 3 Determination of Indium by atomic
absorption spectrometry method
Part 4 - Determination of chromium by
spectrophotometric method
Methods of chemical analysis of primary nickel
Methods of chemical analysis of cadmium copper
Methods of chemical analysis of copper-nickel zinc
alloys
Methods of chemical analysis of brasses
Methods of chemical analysis of copper-tellurium
alloys
IS 4027 : Part 2
IS 4027 : Part 3
IS 4027 : Part 5
IS 4027 : Part 8
IS 4027 : Part 1
IS 4027 : Part 4
IS 4027 : Part 6
IS 4027 : Part 7
IS 4027 : Part 9
IS 4354 : Part 1
IS 4548 : Part 1
IS 4646 : Part 1
IS 4646 : Part 2
IS 4667 : Part 1
IS 4667 : Part 2
IS 4703
IS 5425 : Part 1
IS 5425 : Part 2
IS 5425 : Part 3
IS 5425 : Part 4
IS 5425 : Part 5
IS 6516
IS 7658
IS 8097
IS 8812 : Part 1
IS 8812 : Part 2
Part 2 Determination of manganese-photometric
method
Part 3 Determination of phosphorus by volumetric
method
Part 5 Determination of tin-iodimetric method
Part 8 Determination of iron
Methods of chemical analysis of bronzes Part 1
Determination of copper and lead by electrolytic
method
Part 4 Determination of nickel-dimethylglyoxime
photometric method
Part 6 Determination of zinc by complexometric
(EDTA) method
Part 7 Determination of antimony by Rhodamine B
spectrophotometric method
Part 9 Determination of aluminium by AAS method
Methods of chemical analysis of magnesium,
aluminium brazing alloys, Part 1 Analysis of
aluminium, manganese, zinc and silicon
Methods of chemical analysis of copper gold brazing
alloys Part 1 Analysis of gold and copper
Methods of chemical analysis of copper phosphorus
brazing alloys, Part 1 Analysis for silver and copper
Part 2 Determination of phosphorus
Methods of chemical analysis of silver copper
brazing alloys Part 1 Analysis for silver and copper
Part 2 Determination of silver, copper and tin
Methods of chemical analysis of silver-manganese
brazing alloys
Methods of chemical analysis of misch metal Part 1
Determination of cerium
Part 2 Determination of total rare earths
Part 3 Determination of iron
Part 4 Determination of aluminium
Part 5 Determination of carbon
Methods for chemical analysis of tin and lead in
secondary tin
Spectrographic analysis of aluminium
Methods of chemical analysis of soft solders for
jointing aluminium and aluminium alloys
Methods for chemical analysis of hard solders for
jointing aluminium and aluminium alloys, Part 1
Determination of silver, copper, zinc, antimony
,arsenic, iron and bismuth
Part 2 Determination of aluminium
IS 8816
IS 11035
IS 13963 : Part 1
IS 13963 : Part 2
IS 14644 : Part 2
IS 14644 : Part 3
IS 14644 : Part 4
IS 14644 : Part 5
IS 14644 : Part 6
IS 1335
IS 1472
IS 1473
IS 1527
IS 1760 : Part 2
IS 1760 : Part 4
IS 1760 : Part 5
IS 1493 : Part 1
IS 1493 : Part 3
IS 1493 : Part 4
IS 1493 : Part 6
IS 1493 : Part 7
IS 1493 : Part 8
IS 1760 : Part 1
IS 1760 : Part 3
IS 1917 : Part 1
Methods for selection and preparation of samples for
spectrographic analysis of zinc and zinc alloy ingots
Methods for spectrographic analysis of wrought
aluminium alloys
Chemical analysis of cadmium metal - Part 1
Determination of copper, zinc, lead and iron
Chemical analysis of cadmium metal Part 2
Determination of nickel, arsenic, antimony and
thallium by spectrometric methods
Part 2 Determination of cobalt content
Part 3 Determination of chromium content
Determination of copper content
Part 5 Determination of iron content
Part 6 Determination of manganese content
Methods for direct determination of alumina in
refractory materials
Methods of sampling ferro alloys for determination
of chemical composition
Methods of chemical analysis of manganese ores
Methods for chemical analysis of high silica
refractory materials
Part 2 Determination of silica
Part 4 Determination of carbon dioxide
Part 5 Determination of chlorides
Methods of chemical analysis of iron ores Part 1
Determination of commonb constituents
Part 3 Determination of titanium, chromium,
vanadium, calcium and magnesium by atomic
absorption spectrophotometry
Part 4 Determination of aluminium by atomic
absorption spectrophotomety
Part 6 Determination of sodium and/or potassium
contents-Flame atomic abssorption spectrometric
method
Part 7 Determination of lead and or zinc content Flame atomic absorption spectrometric method
Part 8 Determination of arsenic content Molybdenum blue spectrophotometric method
Methods of chemical analysis of limestone, dolomite
and allied materials Part 1 Determination of loss on
ignition
Part 3 Determination of iron oxide, alumina, calcium
oxide and magnesia
Chemical analysis of quartzite and high silica sand
Part 1 Determination of loss on ignition
IS 1917 : Part 3
IS 1917 : Part 4
IS 1917 : Part 5
IS 1917 : Part 6
IS 2000 : Part 1
IS 2000 : Part 2
IS 2000 : Part 3
IS 2000 : Part 4
IS 2000 : Part 5
IS 2000 : Part 6
IS 2000 : Part 8
IS 2000 : Part 9
IS 2411
IS 3200
IS 3200 : Part 2
IS 3200 : Part 3
IS 3200 : Part 8
IS 4104
IS 4129
IS 6744 : Part 1
IS 9386
IS 10085
IS 12107 : Part 1
IS 12107 : Part 2
IS 12107 : Part 3
IS 12107 : Part 4
IS 12107 : Part 5
IS 12107 : Part 6
IS 12107 : Part 7
IS 12107 : Part 8
IS 12107 : Part 9
IS 12667 : Part 1
Part 3 Determination of silica
Part 4 Determination of aluminium by AAS method
Part 5 determination of iron by AAS method
Part 6 Determination of calcium and magnesium by
atomic absorption spectrometric method
Methods of chemical analysis of bauxite Part 1
Determination of loss on ignition
Part 2 Determination of silica
Part 3 Determination of alumina
Part 4 Determination of ferric oxide
Part 5 Determination of titania
Part 6 Determination of vanadium
Part 8 Determination of manganese by atomic
absorption spectrophotometric method
Part 9 Determination of magnesiuum and calcium by
atomic absorption spectrophotometric method
Methods of chemical analysis of fluorspar (fluorite)
Methods of chemical analysis of cryolite
Chemical analysis of cryolite Part 2 Determination
of total sodium
Part 3 Determination of total aluminium by
ccomplexometric method
Part 8 Determination of phosphorus pentroxide and
silica
Method of chemical analysis of rutile
Methods of chemical analysis of aluminium
trifluoride
Methods of chemical analysis of ilemenite
Methods for chemical analysis of rock phosphate
Methods for chemical analysis of zircon flour or
sand
Methods of chemical analysis of alumino-silicate
refractory materials Part 1 Determination of loss on
ignition
Part 2 Determination of silica
Part 3 Determination of aluminium
Part 4 Determination of phosphorus
Part 5 Determination of titanium
Part 6 Determination of iron
Part 7 Determination of manganese
Part 8 Determination of calcium and magnesium
Part 9 Determination of sodium and potassium by
flame photometry
Methods of chemical analysis of chromite sand Part
1 Determination of silica
IS 12667 : Part 2
IS 12667 : Part 3
IS 12667 : Part 4
IS 10812
IS 10852
IS 11092
IS 11093
IS 11284
IS 11285
IS 11795
IS 11860
IS 12052
IS 12263
IS 12668
IS 13885
IS 13905
IS 12929
IS 13839
IS 14373
IS 14405
IS 916
IS 1394
IS 1407
IS 1783 : Part 1
IS 1783 : Part 2
IS 1784
IS 2034
Part 2 Determination of iron
Part 3 Determination of chromium
Part 4 Determination of calcium oxide
Classification of sponge iron/direct reduced
iron(DRI) fines/briquettes for steel making
Guidelines for storage and transportation of sponge
iron/direct reduced iron(DRI)
Iron ore pellets for direct reduction processes
Iron ore lumps for direct reduction processes
Rotary tube test for iron bearing materials for the
manufacture of sponge iron/direct reduced iron(DRI
)
Various tests on raw materials to be used for coal
based direct rotary kiln direct reduction
Guidelines for ash softening studies on solid
reductants for direct reduction
Guidelines for non -coking coals for solid reductant
based direct reduction in rotary kilns(and other
reactors
Method for determination of re-oxidation rate of
sponge iron/direct reduced iron(DRI) in contact with
humid air and in direct contact with water
Method for determination of regidity of sponge
iron/DRI during transportation and handling
Melting characterstics of sponge iron/direct reduced
iron (DRI)
Non-Magnetics/char in sponge iron (DRI)-Methods
of determination
Hot Briquetted sponge iron (HBI) for steel making
Feedstock (iron oxides and natural gas) for gas
based direct reduction processes-guidelines
Specification for sponge iron/direct reduced iron
(DRI) fines/ briquettes for steel making
Determination of sticking of iron ores used in direct
reduction by gaseous reducing agent - Specification
Determination of distintergration of DR feedstock
iron ore, pellets & sinter) during gaseous reductants
in a shaft reactor
18 litre square tins
Glossary of terms relating to metal containers
Round paint tins
Drums,large,fixed ends, Part 1 Grade A drums
Drums, large, fixed ends, Part 2 Grade B drums
Screwed closures for drums
Round open top sanitary cans for butter and cheese
IS 2087
IS 2123
IS 2134
IS 2471
IS 2474
IS 2552
IS 3101
IS 3259
IS 3286
IS 3575
IS 3603
IS 3680
IS 4638
IS 5682
IS 6941
IS 7182
IS 7852
IS 8449
IS 8469
IS 8932
IS 8933
IS 8996
IS 9209
IS 9396 : Part 1
IS 9396 : Part 2
IS 9445
IS 9503
IS 9634
IS 9635
IS 9976
IS 9991
IS 9992
IS 10325
IS 10339
IS 11078
IS 11079
IS 11104
IS 12340
Square tins for general purpose
Vial (goldie) seals
Round tins for general purposes
Methods of test for metal containers
Metal closures for drums
Steel drums (galvanized and ungalvanized)
Aluminium collapsible tubes
Methods of sampling of metal containers
Round grease tins
Bitumen drums
Seamless aluminium bottles
Round printing ink containers
Seamless rectangular fish tins
Open top drums and kegs
Method for sampling metal closures
Methods of tests for aluminium collapsible tubes
Eye ointment tubes, small
Non-returnable metal aerosol dispensers
Methods of tests for flammability of aerosol
products
Preformed metal screw caps for glass containers
Mess tins
20 litre steel jerry cans
Methods of test for the compatibility of aerosol
products with the metal aeroso l dispensers
Round open top sanitary cans for processed foods,
Part I Tinplate requirements
Round open top sanitary cans for foods and drinks,
Part 2 Sizes and general requirements
Aluminium containers for packing of liquid
pesticides (capacity 5 litres and above)
Aluminium bottles for packing of liquid pesticides
Aerosol valves - 25.4 mm diameter
Methods for sampling of aerosol valves
Method of sampling of open top sanitary (OTS) cans
Condensed milk cans
Round and rectangular tinplate cans for liquid
pesticides
Square tins-15 kg for ghee,vanaspati, edible oils and
bakery shortenings
Ghee, vanaspati ane edible oil tins
Open top sanitary cans for milk powder
Metal cans for pan masala and zarda
Glossary of terms relating to open top sanitary cans
Round open top aluminium containers for liquid
IS 13997
IS 14407
IS 1447 : Part 2
IS 1447 : Part 3
IS 1447 : Part 4
IS 1448 : Part 2
IS 1448 : Part 3
IS 1448 : Part 4
IS 1448 : Part 5
IS 1448 : Part 6
IS 1448 : Part 7
IS 1448 : Part 8
IS 1448 : Part 9
IS 1448 : Part 10
IS 1448 : Part 11
IS 1518
IS 8818
IS 1448 : Part 12
IS 1448 : Part 13
IS 1448 : Part 15
IS 1448 : Part 16
IS 1448 : Part 17
pesticides
Drums large open top
Aluminium cans for bevereges
Methods of sampling of petroleum and its products:
Part 2 Sampling of liquefied petroleum gas (LPG)
Petroleum and its products - Methods of sampling
Part 3 Method of Sampling of Semi-solid and soild
petroleum products
Methods of sampling of petroleum and its products:
Part 4 Sampling of petroleum coke for laboratory
analysis
Methods of test for petroleum and its products Part
2: Acidity
Methods of test for petroleum and its products Part
3: Aniline point
Methods of test for petroleum and its products Part
4: Ash, sulphated ash and water soluble ash
Methods of test for petroleum and its products Part
5: Burning quality
Methods of test for petroleum and its products part
6: Calorific value by bomb calorimeter method
Methods of test for petroleum and its products Part
7: Calorific value by calculation
Methods of test for petroleum and its products Part
8: Carbon residue by Ramsbottom method
Methods of test for petroleum and its products Part
9: Cetane number
Methods of test for petroleum and its products Part
10: Cloud point and pour point
Methods of test for petroleum and its products Part
11: Freezing point of aviation fuels
Method for gauging of petroleum and liquid
petroleum products
Method for measurement of petroleum gases and
town gas in bulk
Methods of test for petroleum and its products Part
12: Colour by ASTM colour scale
Method of test for petroleum and its products Part
13: Colour by Lovibond tintometer
Methods of test for petroleum and its products Part
15: Detection of copper corrosion from petroleum
products by the copper strip tarnish test
Methods of test for petroleum and its products: Part
16 Density of crude petroleum and liquid petroleum
products by hydrometer method
Methods of test for petroleum and its products: Part
IS 1448 : Part 18
IS 1448 : Part 19
IS 1448 : Part 20
IS 1448 : Part 22
IS 1448 : Part 23
IS 1448 : Part 26
IS 1448 : Part 27
IS 1459
IS 1571
IS 1587
IS 1448 : Part 29
IS 1448 : Part 30
IS 1448 : Part 31
IS 1448 : Part 32
IS 1448 : Part 33
IS 1448 : Part 36
IS 1448 : Part 38
IS 1448 : Part 39
IS 1448 : Part 40
IS 1448 : Part 41
IS 1448 : Part 42
17 Diesel index
Methods of test for petroleum and its products: Part
18 Distillation
Methods of test for petroleum and its products: Part
19 Doctor Test
Methods of test for petroleum and its products: Part
20 Determination of flash point by Abel apparatus
Methods of test for petroleum and its products: Part
22 Asphaltene precipitation with normal heptane
Methods of test for petroleum and its products: Part
23 Hydrocarbon types in liquid petroleum products
by fluorescent indicator absorption method
Methods of test for petroleum and its products: Part
26 Knock characteristics of motor fuels by the motor
method
Methods of test for petroleum and its products: Part
27 Knock characteristics of motor fuels by the
research method
Specification for kerosine
Aviation turbine fuels, kerosine type - Specification
Specification for aviation turbine fuels high flash
point type
Methods of test for petroleum and its products: Part
29 Existent gum in fuels by jet evaporation
Methods of test for petroleum and its products: Part
30 Sediment in crude and fuel oils by extraction
Methods of test for petroluem and its products: Part
31 Smoke point
Methods of test for petroleum and its products: Part
32 Density and relative density
Methods of test for petroleum and its products: Part
33 Sulphur by Bomb method
Methods of test for petroleum and its products: Part
36 Sulphur mercaptans
Methods of test for petroleum and its products: Part
38 Determination of lead antiknock compound in
gasoline by gravimetric method
Methods of test for petroleum and its products: Part
39 Vapour pressure by Reid method
Methods of test for petroleum and its products: Part
40 Water by distillation
Methods of test for petroleum and its products: Part
41 Water and sediment in crude oils and fuel oils by
centrifuge
Methods of test for petroleum and its products: Part
42 Water reaction of aviation fuels
IS 1448 : Part 43
IS 1448 : Part 44
IS 1604
IS 1745
IS 3470
IS 1448 : Part 50
IS 1448 : Part 51
IS 1448 : Part 52
IS 1448 : Part 53
IS 1448 : Part 55
IS 1448 : Part 58
IS 1448 : Part 59
IS 1448 : Part 61
IS 1448 : Part 62
IS 1448 : Part 64
IS 1448 : Part 65
IS 1448 : Part 66
IS 4639
IS 4654
IS 495
IS 506
IS 1448 : Part 69
IS 1448 : Part 70
IS 1448 : Part 71
Methods of test for petroleum and its products: Part
43 Bromine number by colour indicator method
Methods of test for petroleum and its products: Part
44 Bromine number by electrometric titration
method
Aviation gasoline - Specification
Specification for petroleum hydrocarbon solvent
Specification of hexane, food grade
Methods of test for petroleum and its products: Part
50 Chlorine in new and used lubricants (sodium
alcoholate method)
Methods of test for petroleum and its products: Part
51 Copper strip corrosion test for lubricating greases
Methods of test for petroleum and its products: Part
52 Drop Point
Methods of test for petroleum and its products: Part
53 Determination of acidity and alkalinity of greases
Methods of test for petroleum and its products: Part
55 Saponification value, saponifiable and
unsaponifiable matter
Methods of test for petroleum and its products: Part
58 Determination of insolubles in greases
Methods of test for petroleum and its products: Part
59 Determination of mineral oil content in greases
Methods of test for petroleum and its products: Part
61 Evaporation loss in greases (2-hour drying)
Methods of test for petroleum and its products: Part
62 Heat stability of greases
Methods of test for petroleum and its products: Part
64 Non-volatile matter in solvents
Methods of test for petroleum and its products: Part
65 Oxidation test for lubricating oils
Methods of test for petroleum and its products: Part
66 Flash Point (open) and fire point by penskymartens apparatus
Glossary of petroleum terms
Paraffin wax - Specification
Specification for graphite, flake for lubricants
Specification for automotive grease (superseding IS
: 509 : 1953)
Methods of test for petroleum and its products: Part
69 Flash and fire point by cleveland (open) cup
Methods of test for petroleum and its products: Part
70 Residue in liquefied petroleum gases
Methods of test for petroleum and its products: Part
71 Vapour pressure of liquefied petroleum gases
IS 1448 : Part 72
IS 1448 : Part 73
IS 1448 : Part 74
IS 1448 : Part 75
IS 1448 : Part 76
IS 1448 : Part 78
IS 1448 : Part 79
IS 1448 : Part 80
IS 1448 : Part 81
IS 1448 : Part 82
IS 1448 : Part 83
IS 1448 : Part 84
IS 1448 : Part 85
IS 1448 : Part 86
IS 1448 : Part 87
IS 1448 : Part 89
IS 1448 : Part 90
IS 1448 : Part 91
Methods of test for petroleum and its products: Part
72 Volatility of liquefied petroleum gases
Methods of test for petroleum and its products: Part
73 Hydrogen sulphide in liquefied petroleum gases
Methods of test for petroleum and its products: Part
74 Dryness of liquefied petroleum gases
Methods of test for petroleum and its products: Part
75 Odour of liquefied petroleum gases
Methods of test for petroleum and its products: Part
76 Density of liquefied petroleum gases
Methods of test for petroleum and its products: Part
78 Determination of trace elements in petroleum
products -- Copper
Methods of test for petroleum and its products: Part
79 Determination of trace elements in petroleum
products -- Vanadium
Methods of test for petroleum and its products: Part
80 Determination of trace elements in Petroleum
products -- Lead
Methods of test for petroleum and its products: Part
81 Determination of trace elements in Petroleum
products -- Total chlorine (wickbold oxyhydrogen
combustion method)
Methods of test for petroleum and its products: Part
82 Total lead content in gasoline by iodine
monochloride method
Methods of test for petroleum and its products: Part
83 Determination sulphur by Wickbold oxyhydrogen
method
Methods of test for petroleum and its products: Part
84 Determination of trace elements in Petroleum
products -- Arsenic
Methods of test for petroleum and its products: Part
85 Oil separation on
1 storage of greases
Methods of test for petroleum and its products: Part
86 Determination of total base number by
potentiometric perhcloric acid titration method
Methods of test for petroleum and its products: Part
87 Autoignition temperature of liquid petroleum
products
Methods of test for petroleum and its products: Part
89 Test for thermal stability of lubricating greases
Methods of test for petroleum and its products: Part
90 Test for water washout characteristics of
lubricating greases
Methods of test for petroleum and its products: Part
IS 1448 : Part 92
IS 1448 : Part 93
IS 1448 : Part 94
IS 1448 : Part 95
IS 1448 : Part 97
IS 1448 : Part 98
IS 1448 : Part
100
IS 1448 : Part
101
IS 1448 : Part
102
IS 1448 : Part
103
IS 1448 : Part
104
IS 1448 : Part
105
IS 1448 : Part
106
IS 1448 : Part
107
IS 1448 : Part
108
IS 1448 : Part
91 Emulsion characteristics of petroleum oils and
synthetic fluids
Methods of test for petroleum and its products: Part
92 Cone penetration of petrolatum
Methods of test for petroleum and its products: Part
93 Needle penetration of petroleum waxes
Methods of test for petroleum and its products: Part
94 Test for oxidation stability of lubricating greases
by oxygen bomb method
Methods of test for petroleum and its products: Part
95 Determination of demulsification number of
lubricating oils
Methods of test for petroleum and its products: Part
97 Thermal oxidation stability of aviation turbine
fuels (JFTOT method)
Methods of test for petroleum and its products: Part
98 Determination of
1 emulsion stability of
emulsifiable cutting oils
Methods of test for petroleum and its products: Part
100 Determination of thermal stability of
emulsifiable cutting oils
Methods of test for petroleum and its products: Part
101 Colorimetric determination of phosphorus in
lubricating oils
Methods of test for petroleum and its products: Part
102 Determination of air release value
Methods of test for petroleum and its products: Part
103 Barium, calcium, phosphorous and zinc in
lubricating oils by direct reading emission
spectrographic method
Methods of test for petroleum and its products: Part
104 Aromatics in light naphthas and aviation
gasolines by gas chromatography
Methods of test for petroleum and its products: Part
105 Ultraviolet (UV) absorbance and absorptivity of
petroleum products
Methods of test for petroleum and its products: Part
106 Determination of oxidation characteristics of
inhibited steam-turbine oils
Methods of test for petroleum and its products: Part
107 Precipitation number of lubricating oils using
the cold-cranking simulator
Methods of test for petroleum and its products: Part
108 Aparent viscosity of engine oil at low
temperature using the cold-cranking simulator
Methods of test for petroleum and its products: Part
109
IS 1448 : Part
110
IS 1448 : Part
111
IS 1448 : Part
112
IS 1448 : Part
113
IS 1448 : Part
114
IS 1448 : Part
115
IS 1448 : Part
119
IS 1448 : Part
120
IS 1448 : Part
121
IS 1448 : Part
122
IS 1448 : Part
123
IS 1448 : Part
124
IS 1448 : Part
126
IS 1448 : Part
127
IS 1448 : Part
128
IS 1448 : Part
129
109 Determination of mercaptan sulphur Amperometric and potentiometric method for
aviation turbine fuels
Methods of test for petroleum and its products: Part
110 Cold filter plugging point of distillate fuels
Methods of test for petroleum and its products: Part
111 Analysis of liquefied petroleum gases (LPG)
and propylene concentrate by gas chromatography
Methods of test for petroleum and its products: Part
112 Determination of lead in gasolsine by atomic
absorption spectrometry
Methods of test for petroleum and its products: Part
113 Determination of total acidity of ATF (Aviation
turbine fuel)
Methods of test for petroleum and its products: Part
114 Determination of congealing point of petroleum
waxes
Methods of test for petroleum and its products: Part
115 Determination of salt content in crude petroleum
and its products
Methods of test for petroleum and its products: Part
119 Aromatic traces in light saturated hydrocarbons
by GLC
Methods of test for petroleum and its products: Part
120 Zinc in libricatinng oil
Methods of test for petroleum and its products: Part
121 Barium in lubricating oil additive concentrates
Methods of test for petroleum and its products: Part
122 Conradson carbon residue of petroleum
products
Methods of test for petroleum and its products: Part
123 Oxidation stability of inhibited mineral tubrine
oils
Methods of test for petroleum and its products: Part
124 Dilution of gasoline engine crankcase oils
Methods of test for petroleum and its products: Part
126 Determination of ash content in raw and
calcined petroleum coke
Methods of test for petroleum and its products: Part
127 Determination of iron in petroleum coke
Methods of test for petroleum and its products: Part
128 Determination of nickle in calcined petroleum
coke
Methods of test for petroleum and its products: Part
129 Determination of polymeric content in
lubricating oils base stock
IS 1448 : Part
130
IS 1448 : Part
131
IS 1448 : Part
132
IS 1448 : Part
133
IS 1448 : Part
135
IS 1448 : Part
136
IS 1448 : Part
137
IS 1448 : Part
138
IS 1448 : Part
139
IS 1448 : Part
140
IS 1448 : Part
141
IS 1448 : Part
142
IS 1448 : Part
143
IS 1448 : Part
144
IS 1448 : Part
145
IS 1448 : Part
146
Methods of test for petroleum and its products: Part
130 Determination of vibrated bulk density of
calcined petroleum coke
Methods of test for petroleum and its products: Part
131 Determination of silicone in petroleum coke
Methods of test for petroleum and its products: Part
132 Determination of moisture content in raw and
calcined petroleum coke
Methods of test for petroleum and its products: Part
133 Determination of real density of calcined
petroleum coke
Methods of test for petroleum and its products: Part
135 Determination of water in crude oil by
distillation
Methods of test for petroleum and its products: Part
136 Determination of loss of lubricating oils (Noak's
Method)
Methods of test for petroleum and its products: Part
137 Water separation characteristics of Aviation
Turbine Fuels
Methods of test for petroleum and its products: Part
138 Determination of soap content
Methods of test for petroleum and its products: Part
139 Determination of real density of calcined
petroleum coke using butanol or toluene
Methods of test for petroleum and its products: Part
140 Determination of apparent density of petroleum
coke by mercury pyknometer method
Methods of test for petroleum and its products: Part
141 Determination of apparent density of petroleum
coke by helium method
Methods of test for petroleum and its products: Part
142 Determination of water separation
characteristics of aviation turbine fuels by portable
separometer
Methods of test for petroleum and its products: Part
143 Evaluation of white mineral oils by Ultraviolet
Absorption
Methods of test for petroleum and its products: Part
144 Non-condensable gases in C2 and lighter
hydorcarbon products by Gas Chromatography
Methods of test for petroleum and its products: Part
145 Sodium, Nickel and Vanadine in fuel oils and
crude oils by atomic absorption spectroscopy
Methods of test for petroleum and its products:
Determination of yield stress and viscosity of engine
IS 1448 : Part
147
IS 1519 : Part 1
IS 1519 : Part 2
IS 2164
IS 2166
IS 2808
IS 6044 : Part 1
IS 8502
IS 11488
IS 11489
IS 408
IS 6044 : Part 2
IS 11254
IS 507
IS 508
IS 719
IS 958
IS 1012
IS 1083
IS 1088
IS 1115
IS 1118
IS 1589
IS 1628
IS 1674
IS 1758
IS 2297
oils at low temperature
Methods of test for petroleum and its products:
Determination of potential gum in motor gasoline
Methods for temperature measurement of petroleum
and its products, Part I At atmospheric pressure
Methods for temperature measurement of petroleum
and its products, Part II Above atmospheric pressure
Method for calculation of bulk quantities of
petroleum and liquid petroleum products
Method for computation of capacity tables for
horizontal and tilted oil storage tanks
Method for computation of capacity tables for
pressurized storage tanks
Code of practice for liquefied petroleum gas storage
installations : Part I Commercial and industrial
cylinder installations
Specification for petroleum coke
Specification for fuel oil for use in marine diesel
engines
Specification for Heavy Petroleum stock (HPS)
Specification for grease No. 0, graphited
Code of practice for liquefied petroleum gas storage
installations Part II Industrial, commercial and
domestic bulk storage installations
Code of practice for dispensation of aviation fuel
and allied products
Specification for general purpose grease
Specification for grease, graphited
Specification for antifriction bearing grease
(superseding IS : 1276 : 1958)
Specification for temporary corrosion preventive
grease, soft film, cold application
Specification for turbine lubricating oils
Specification for industrial white oil
Specification for lubricants for clock like
mechanisms and precision instruments
Specification for cutting oil, soluble
Specification for gear lubricants, multipurpose
(extreme pressure gear oil)
Oil, cylinder - Specification
Specification for Axle Oil
Specification for temporary corrosion preventive
fluid, soft film, solvent deposited
Specification for jute batching oil
Gear lubricants, compounded - Specification
IS 2664
IS 3065
IS 3098
IS 4543
IS 4578
IS 5730
IS 5759
IS 6048
IS 6049
IS 6050
IS 6263
IS 6552
IS 7514
IS 7895
IS 8406
IS 9136
IS 9182 : Part 1
IS 9182 : Part 2
IS 9182 : Part 3
IS 9466
IS 9554
IS 9611
IS 9917
IS 10522
IS 10647
IS 11186
IS 11637
IS 11656
IS 11695
IS 10531
IS 10532 : Part 1
IS 10532 : Part 2
Specification for quenching oil
Specification for cutting oil, neat
Specification for oil, hydraulic, mineral oil type
Specification for marquenching oil
Lubricating oils for refrigeration machinery Specification
Specification for volatile corrosion inhibitor powder
Antifreeze Coolant - Specification
Specification for temporary corrosion preventive,
soft film, hot dipping type
Code of practice for application of temporary
corrosion preventives
Specification for temporary corrosion preventives,
strippable, hot dipping type
Specification for VCI treated paper
Specification for straight mineral high demulsibility
oils
Grease, Low temperature - Specification
Tests for fire resistant characteristics of hydraulic
fluids used in mining machinery
Specification for gear lubricants for enclosed
industrial gear drives
Specification for calcium complex grease
Specification for lubricants for wire ropes and fibre
cores Part I lubricants for fibre core of wire ropes
Specification for lubricants for wire ropes and fibre
cores Part II Lubricants for wire strends and ropes
Specification for lubricants for wire ropes and fibre
cores Part III Lubricants for rope dressing in service
Viscosity classification of industrial liquid lubricants
Lubricants for open gears
Specification for cutting oil soluble, clear
Calcium base heat resistant grease
Antiwear hydraulic oil
Wheel bearing grease
Synthetic grinding fluid
Specification for Calcium base, E.P. grease
Antiwear hydraulic oil, extra Heavy duty type
Specification for inhibited type machinery oil
Code of practice for selection and use of fire
resistant hydraulic fluids
Fire resistant hydraulic fluids Part I Dilute emulsions
for powered supports
Fire resistant hydraulic fluids Part II Invert
emulsions water-in-oil type
IS 10532 : Part 3
IS 10532 : Part 4
IS 11159 : Part 1
IS 11159 : Part 2
IS 11159 : Part 3
IS 11696
IS 12203
IS 12790
IS 12927
IS 13256
IS 13656
IS 13796
IS 13797
IS 13913
IS 14383
IS 14384
IS 14385
IS 73
IS 14234
IS 212
IS 216
IS 334
IS 454
IS 702
IS 3116
IS 3117
IS 5451
IS 8887
IS 9381
IS 9382
Fire resistant hydraulic fluids Part III Water glycol
type
Fire resistant hydraulic fluids Part IV Phosphate
ester type
General classification of lubricants, industrial oils
and related products (Part I) (Class L)
Classification of lubricants, industrial oils and
related products Part 2 Family A (Total loss
systems)
General classification of lubricants, industrial oils
and related products (Part 3) Family F (Spindle
bearings, bearings and associated clutches)
Specification for inhibited type spindle oil
Lithium base grease for automotive purposes
Non-soap grease
Glass moulding oils, non-graphited
Air compressor lubricants - Types DAA and DAB
Internal Combustion Engine Crankcase Oils
(Gasoline and Diesel)
Molybdenum disulphide powder for lubricants
Molybdenum disulphide dispersion in oil
Molybdenum disulphide paste
Silicone greases - Specification
Colloidal graphite dispersion in oil - Specification
Aluminium cold rolling oils - Specification
Specification for paving bitumen
Lubricants for two stroke spark ignition air-cooled
gasoline engines
Specification for crude coal tar for general use
Specification for coal tar pitch
Glossary of terms relating to bitumen and tar
Cutback bitumen from waxy crude - Specification
Specification for industrial bitumen
Sealing compound for lead-acid batteries
Specification for bitumen emulsion for roads
(anionic type)
Glossary of terms relating to coal carbonization
products
Specification for bitumen emulsion for roads
(cationic type)
Methods for testing tar and bituminous materials:
Determination of FRAASS breaking point of
bitumen
Methods for testing tar and bituminous materials:
Determination of effect of heat and air by thin film
IS 9912
IS 10511
IS 10512
IS 13758 : Part 1
IS 13758 : Part 2
IS 437
IS 1354
IS 4023
IS 4286
IS 436 : Part 1 :
Sec 2
IS 439
IS 1350 :Part 3
IS 1350 :Part 4 :
Sec 2
IS 1353
IS 1355
IS 3810 :Part 1
IS 3810 :Part 2
IS 3810 :Part 3
IS 5062 :Part 2
IS 5062 :Part 3
IS 5062 :Part 4
IS 6345
IS 7190
oven tests
Coal tar based coating materials and suitable primers
for protecting iron and steel pipelines
Method for determination of asphaltenes in bitumen
by precipitation with normal heptane
Methods for determination of wax content in
bitumen
Coal Tar Pitch; Methods of test Part 1:
Determination of matter insoluble in quinoline
Coal tar pitch: Methods of test Part 2; Determination
of coking value
Size analysis of coal and coke for marketing
Methods of test for coke special test
Methods for the determination of reactivity of coke
Domestic coke
Methods for sampling of coal and coke: Part I
Sampling of Coal/Section 2: Mechanical sampling
Industrial coke (Superseding IS 4836 : 1968, IS
5615:1970, IS 6372:1971 and IS 7189:1974)
Methods of test for coal and coke: Part III
Determination of sulphur
Methods of test for coal and coke: Part IV Ultimate
analysis, Section 2 - Determination of nitrogen
[Superseding IS 1351:1959]
Methods of test for coal carbonization - caking
index, swelling and Grey-King assay (L.T) coke
types
Methods of determination of chemical composition
of ash of coal and coke
Glossary of terms relating to solid mineral fuels:
Part I Terms relating to coal and its preparation
Glossary of terms relating to solid mineral fuels:
Part II Terms relating to coal sampling and analysis
Glossary of terms relating to solid mineral fuels;
Part III Terms relating to coke
Methods of test for brown coals and lignites: Part II
Determination of ash
Methods of test for brown coals and lignites: Part III
Determination of the yields of tar, water, gas and
coke by low temperature distillation
Methods of test for brown coals and lignites: Part IV
Determination of the yield of benzene soluble
extract
Methods of sampling of coal for float and sink
analysis
Methods of determination of bulk density of coke
IS 7929
IS 12770
IS 5062 :Part 5
IS 5209
IS 9127 :Part 2
IS 9127 :Part 3
IS 9127 : Part 5
IS 9949
IS 12891
IS 13810
IS 534
IS 536
IS 537
IS 538
IS 539
IS 540
IS 1839
IS 1840
IS 245
IS 501
IS 717
IS 718
IS 869
IS 880
IS 1781
IS 3321
IS 4105
IS 4566
IS 5149
IS 5158
IS 5254
IS 5271
IS 5295
Methods of determination of electrical resistivity of
chemical coke
Coal for cement manufacture
Methods of test for brown coals and lignites: Part V
Determination of acetone soluble material in the
benzene extract brown coals and lignites
Principles and conventions for flow sheets for coal
preparation plant
Methods for petrographic analysis of coal: Part II
Preparation of coal samples for petrographic
analysis
Methods for Petrographic analysis of coal:Part 3
Determination of group composition of bituminous
coal and anthracite
Methods for Petrographic analysis of coal:Part 5
Microscopical determination of the reflectance of
vitrinite
Methods of test for abrasive properties of coal and
associated minerals
Methods of determination of fusibility of ash of coal,
coke and lignite
Code of practice for float and sink analysis of coal
Benzene
Toluole, industrial
Toluene, pure, nitration grade
Phenol (carbolic acid)
Naphthalene
Refined cresylic acid
Toluene, reagent grade
Benzene, reagent grade
Trichloroethylene, technical
Oxalic acid, technical and analytical reagent
Carbon disulphide, technical
Carbon tetrachloride
Ethylene dichloride
Tartaric acid
Urea, technical
Formaldehyde solution
Styrene (Vinyl benzene)
Methylene chloride (dichloromethane), technical
Maleic anhydride, technical
Phthalic anhydride, technical
Acetanilide
Paraformaldehyde
Ethylene glycol
IS 5296
IS 5297
IS 5464
IS 5573
IS 5591
IS 5592
IS 5992
IS 6393
IS 6412
IS 6515
IS 6712
IS 6718
IS 6768
IS 6775
IS 6971
IS 6972
IS 7134
IS 7135
IS 7330
IS 7559
IS 7618
IS 7619
IS 7642
IS 7729
IS 7901
IS 7910
IS 7911
IS 7918
IS 8050
IS 8058
IS 8278
IS 8796
IS 8873
IS 8874
IS 9207
IS 9250
IS 9908
IS 9986
IS 10744
IS 10745
IS 12210
IS 12277
IS 12345
IS 12438
Chloroform, pure and technical
Perchloroethylene (tetrachloroethylene), technical
Citric acid, monohydrate - Specification
Ethylene oxide
Chlorobenzene
Monochloroacetic acid
p-Dichlorobenzene, technical
Alpha-Phenylacetamide
Benzoylchloride, technical
Sodium pentachlorophenate, technical
o-Dichlorobenzene
phenoxyacetic acid
m-Aminophenol
Ethyl chloride, technical
2 - ethyl hexane - 1 - OL
Benzotrichloride, technical
Diphenyl
Dimethyl sulphate, technical
Methods of sampling and test for ion-exchange
resins
Salicylic acid, technical
Hexachloroethane
Pentaerythritol
4-Aminophenol
Sodium monochloroacetate
Triethanolamine, technical
Monoethanolamine
Diethanolamine
Diethylene glycol
Alpha picoline
Pyridine
Diphenylamine, technical
Trimethylamine, technical
Monomethylamine, technical
Dimethylamine, technical
Di-tert-butyl-paracresol, technical
p-nitrophenol
Formic acid
Benzaldehyde, technical
Resorcinol
Acetophenone
Caprolactam
Polyethylene glycol 400
Vinyl acetate monomer
Dimethyl terephthalate
IS 12540
IS 13322
IS 13359
IS 13475
IS 14310
IS 14375
S 170
IS 229
IS 230
IS 231
IS 321
IS 336
IS 695
IS 1049
IS 1235
IS 2252
IS 2302
IS 2631
IS 2632
IS 2979
IS 4117
IS 5860
IS 6613
IS 6749
IS 9850
IS 9851
IS 14502
IS 2630
IS 2740
IS 2741
IS 2744
IS 2833
IS 3229
IS 3242
IS 3562
IS 4265
IS 4334
IS 4335
IS 4336
IS 4425
IS 4523
IS 4524
IS 4525
Acrylonitrile, technical
Furfural, technical
Polyethylene glycol 200
Sodium Formate
Glyoxal (40 percent solution) - Specification
Cyclohexanone
Acetone
Ethyl acetate
Normal butyl acetate
Amyl acetate
Absolute alcohol
Ether
Acetic acid
Alcohol, perfumery grade
Acetic anhydride
Diacetone alcohol
Tables for alcoholometry by hydrometer method
iso-Propyl alcohol
Crotonaldehyde
Fusel oil
Alcohol denaturants
Table and inter-conversion charts for ethanol-water
mixtures
Neutral spirit for alcoholic drinks
Glossary of terms relating to alcohol (ethyl industry
and trade)
Methyl iso-Butyl ketone
iso-Propyl ether
n-Dibutyl ether
Nitrobenzene
Sulphanilic acid, technical
Beta-Naphthol
1-Naphthylamine
Aniline, technical
Naphthionic acid (sodium salt)
Beta-oxynaphthoic acid (BON ACID)
p-nitrotoluene, technical
4,4'-Diaminostilbene-2.2'- Disulphonic acid
2-Chloroaniline
m-Chloroaniline
4-Chloroaniline
p-Nitrotoluene-o-sulphonic acid
Acetoacetanilide
Acetoacet-o-chloroanilide
4-Aminoacetanilide
IS 4526
IS 4527
IS 4528
IS 5042
IS 5044
IS 5045
IS 5299
IS 5438
IS 5646
IS 5647
IS 5648
IS 5649
IS 6264
IS 6265
IS 6266
IS 6961
IS 6962
IS 6977
IS 7359
IS 7360
IS 7362
IS 7364
IS 7635
IS 7636
IS 7637
IS 7641
IS 7643
IS 7644
IS 7645
IS 7646
IS 7647
IS 7661
IS 7686
IS 7704
IS 8059
IS 8111
IS 8120
IS 8193
IS 8194
IS 8195
IS 8196
IS 8232
IS 8233
2,5-Dichloroaniline
2-Nitro-4-chlorotoluene
4,4'-Dinitrostilbene-2,2'- disulphonic acid (disodium
salt)
1-Aminoanthraquinone
Benzanthrone
Dye Intermediates - Metanilic acid, technical
Methods of sampling and tests for dye-intermediates
Nitrobenzene-3-sulphonic acid, sodium salt
p-Anisidine
p-Toluidine
O-Anisidine
2-Toluidine
J-acid, Technical - Specification
Quinizarine, technical
1, 4-Diaminoanthraquinone, technical
3-Bromobenzanthrone, technical
3,9-Dibromobenzanthrone, technical-Specification
1,5-Diaminoanthraquinone, technical
1-Chloroanthraquinone, technical
1,5-Dichloroanthraquinone, technical
Tobias acid
3-Nitro-4-aminotoluene
2-Nitroaniline
4-Chloro-2-toluidine
5-Chloro-2-toluidine
4-Chloro-2-anisidine
4-Chloro-2-nitroaniline
3-Nitroaniline
Phenyl J-acid, technical
Bonzoyl J-acid, technical
Acetoacet-2-toluidide
4-Aminoazobenzene
3(N,N-diethyl) aminophenol
4-Aminotoluene-3-sulphonic acid
2-Chloro-5-aminotoluene-4-sulphonic acid,
technical
N,N-Dimethylaniline
Schaeffer's acid (sodium salt), technical
2-Nitro chlorobenzene
3-Nitro chlorobenzene
4-Nitro chlorobenzene
2,4-Dinitrotoluene
2,6-Diaminoanthraquinone, technical
Phenyl peri acid, technical
IS 8397
IS 8398
IS 8399
IS 8400
IS 8551
IS 8552
IS 8553
IS 8626
IS 8627
IS 8628
IS 8634
IS 8637
IS 8861
IS 8878
IS 8893
IS 8904
IS 8941
IS 9270
IS 9274
IS 9288
IS 10457
IS 10458
IS 10468
IS 10475
IS 11126
IS 11176
IS 11177
IS 11181
IS 11540
IS 11557
IS 12019
IS 12628
IS 12706
IS 12707
IS 13590
IS 13841
IS 13842
IS 13843
IS 1300
IS 1461
IS 2036
IS 2046
IS 2076
IS 2249
2-Nitrotoluene
3-Nitrotoluene
1,3-Dinitrobenzene
2,4-Dinitro chlorobenzene
1-(4'-sulphophenyl)-3-methyl-5-pyrazolone
1-(4'-sulphophenyl)-3-carboxy -5-pyrazolone
1-Phenyl-3-methyl-5-pyrazolone
R-Salt, technical
Gamma acid
G Salt (dipotassium salt), technical
Nitrodiazo acid
H Acid
1,4-Dichloro-2-nitrobenzene
Bromamine acid, technical
1-(3-Chlorophenyl) -3-methyl-5-pyrazolone
Anthrarufin
Chrysazin
1,4-Diethoxy benzene
Beta-Chloroethylamine hydrochloride solution
Cyanuric chloride
N-Methyl J-acid
Di-J-acid
1,3-Phenylenediamine-4-sulphonic acid
J-acid urea
3-Toluidine
3,3' Dichlorobenzidine salts
4,Nitro-2-toluidine
Sulphotobias acid
Michlers ketone
2-Naphthylamine, 3:6.8 trisulphonic acid, technical
2'-Chloro-(4-sulphophenyl)-3-methyl-5-pyrazolone
2-Amino-4-nitrophenol, technical
Naphthol AS-E
Naphthol AS-D
Acetoacet-2-anisidide
5-Sulfoanthranilic acid, technical
m-Ureidoaniline, technical
Acetoacet-3-xylidide
Phenolic moulding materials - Specification
Plastic buttons (thermosetting)
Phenolic laminated sheets
Decorative thermosetting synthetic resin bonded
laminated sheets
Unsupported flexible polyvinyl chloride sheeting
Adhesives (Liquid) for leather beltings
IS 2257
IS 2267
IS 2508
IS 2543
IS 2560
IS 2561
IS 2562
IS 2828
IS 2886
IS 3389
IS 3434
IS 3447
IS 3669
IS 3687
IS 3693
IS 3730
IS 3988
IS 4185
IS 4663
IS 4761
IS 5322
IS 5378
IS 6367
IS 6746
IS 7166
IS 7393
IS 7395
IS 7437
IS 7933
IS 8255
IS 9220
IS 9591
IS 9766
IS 9827
IS 9833
IS 9843
IS 9848
IS 9849
Paper adhesives, liquid gum and office-paste type
Polystyrene moulding and extrusion materials
Low density polyethylene films
Cellulose secondary acetate materials for moulding
and extrusion
Rubber based adhesives for tubes, non curing
Rubber based adhesives for the automobiles industry
Rubber based adhesives for tyres and tubes,curing
Glossary of terms used in the plastics industry
Labelling paste for paper labels
Urea-formaldehyde moulding materials
Glossary of terms for adhesives and pressure
sensitive adhesive tapes
Shellac jointing compound
Melamine-formaldehyde moulding materials
Pressure sensitive adhesive cloth tapes
Plastic spectacle frames
High density polyethylene buckets
Guar gum
Adhesive paper tapes
Permanent rubber based adhesives for footwear
industry
Unsupported PVC rainwear
High density polyethylene wash-bowls
Polyethylene cane
Dextrin for adhesive industry
Unsaturated polyester resin systems
Cellulose secondary acetate flakes
Adhesive, bitumen emulsion
Gum ghatti
Methods of sampling and test for vegetable
adhesives
Flelxible polyurehane foam for domestic mattresses
Flexible load bearing polyurethane foam
components for vehicles
Tableware made of melamine plastics
Plasticizer Esters - Methods of sampling and tests
Flexible PVC compounds
Shoe adhesive, Natural, rubber latex base
List of pigments and colourants for use in plastics in
contact with foodstuffs, pharmaceuticals and
drinking water
Code of practice for use of adhesives for packaging
Briefcases, plastic body
Guide for selection of toys for different age groups
IS 9873 : Part 1
IS 9873 : Part 3
IS 10141
IS 10142
IS 10146
IS 10148
IS 10171
IS 10734
IS 10889
IS 10149
IS 10815
IS 10909
IS 10910
IS 10951
IS 11022
IS 11273
IS 11320
IS 11434
IS 11435
IS 11551
IS 11704
of children
Safety requirements for toys: Part 1 Mechnaical and
Physical properties
Safety requirements for toys: Part III Flammability
requirements
Positive list of constituents of polyethylene in
contact with foodstuffs, Pharmaceuticals and
drinking water (with amendment no. 1)
Styrene polymers for its safe use in contact with
foodstuffs, pharmaceuticals and drinking water
Polyethylene for its safe use in contact with
foodstuffs, pharmaceuticals and d rinking water
Positive list of constituents of polyvinyl chloride and
its copolymers for safe use in contact with
foodstuffs, pharmaceuticals and drinking water
Guide on suitability of plastics for food packaging
Case, Vanity, moulded body
High density polyethylene films
Positive list of constituent of styrene polymers in
contact with foodstuffs, pharmaceuticals and
drinking water
Code of practice for the application of adhesives in
footwear industry
Positive list of constituents of polypropylene and its
copolymers in contact with foodstuffs,
pharaceuticals and drinking water
Polypropylene and its copolymers for its safe use in
contact with foodstuffs,pharmaceuticals and
drinking water
Polypropylene and propylene - Copolymer
thermoplastics - Designation
Methods of sampling and test for glues (bone,
skin/fleshings and fish glues)
Woven roving fabrics of 'E' glass fibre
Glass fibre rovings for the reinforcement of
polyester and of epoxide resin systems
Specification for ionomer resins for its safe use in
contact with foodstuffs, pharmaceutical and drinking
water
Positive list of constituents of ionomer resins for its
safe use in contact with foodstuffs, pharmaceuticals
and drinking water
Glass fibre chopped strand mat for the reinforcement
of epoxy, phenolic and polyester resin systems
Specification for ethylene/acrylic acid (EAA)
copolymers for their safe use in contact with
IS 11705
IS 11988
IS 12087
IS 12830
IS 12229
IS 12247
IS 12248
IS 12252
IS 12994
IS 13055
IS 13193
IS 13199
IS 13254
IS 13255
IS 13262
IS 13410
IS 13411
IS 13449
IS 13463
IS 13464
IS 13959
IS 13960
foodstuffs, pharmaceuticals and drinking water
Positive list of constituents of ethylene/acrylic acid
(EAA) copolymers for safe use in contact with
foodstuffs, pharmaceuticals and drinking water
Hot seal patches
Suitcase for air and submarine crew
Rubber based adhesives for fixing PVC tiles to
cement
Positive list of constituents of polyalkylene
terephthalates (PET & PBT) for their safe use in
contact with foodstuffs, pharmaceuticals and
drinking water
Specification for nylon-6 polymer for its safe use in
contact with foodstuffs pharmaceuticals and
drinking water
Positive list of constituents of nylon-6 polymer for
its safe use in contact with foodstuffs,
pharmaceuticals and drinking water
Polyalkylene terephthalates (PET & PBT) for their
safe use in contact with foodstuffs, pharmaceuticals
and drinking water
Epoxy adhesives, room temperature curing General
purpose
Methods of sampling and test for anaerobic
adhesives and sealants
Polyalkylene terephthalates (PET and PBT) for
moulding and extrusion
Adhesives-Guidelines for surface preparation for
adhesive bonding
Animal glue for match industry
Adhesive-Liquid-for use on high speed flap
gumming and embossed envelope machines
Pressure sensitive adhesive tapes with plastic base
Glass reinforced polyester sheet moulding
compounds (SMC)
Glass reinforced polyester dough moulding
compounds (DMC)
Positive list of constituents of ethylene vinyl acetate
(EVA) copolymers in contact with foodstuffs,
pharmaceuticals and drinking wat
Polyamide (nylon 6) material for moulding and
extrusion
Polyamide (nylon 66) materials for moulding and
extrusion
Polypropylene sutly
Thermoplastic strappings
IS 13576
IS 13577
IS 13601
IS 13653
IS 14182
IS 14421
IS 14425
IS 14434
IS 14443
IS 14500
IS 14534
IS 14535
IS 443
IS 444
IS 446
IS 636
IS 637
IS 1259
IS 447
IS 1677
IS 1683
IS 1684
IS 1685
IS 1741
IS 1867
Ethylene menthacrylic acid (EMAA) copolymers
and terpolymers for its safe use in contact with
foodstuffs, pharmaceuticals and drinking water
Positive list of constituents of ethylene methacrylic
acid (EMAA) copolymers and terpolymers in
contact with foodstuffs, pharmaceuticals and
drinking water
Ethylene vinyl acetate (EVA) copolymers for its safe
use in contact with foodstuffs, pharmaceuticals and
drinking water
Anaerobic jointing compounds for use in liquid
petroleum gas appliances and installations
Solvent cement for use with unplasticized
polyvinylchloride plastic pipe and fittings
Plasticizer esters (superseding IS 3371 : 1980, IS
3672 : 1980, IS 6627 : 1980 and IS 9572 : 1980)
Guide for manufacture of glass reinforced polyester
resin mouldings
Polycarbonate materials for moulding and extrusion
Polycarbonate sheets
Linear low density polyethylene (LLDPE) films
Guidelines for recycling of plastics
Recycled plastics for the manufacturing of products
- Designation
Methods of sampling and test for rubber hoses
(second revision)
General purpose rubber water hose (fourth revision)
(Superseding IS 445 : 1964 and IS 913 : 1968)
Rubber air hose (fourth revision) (Superseding
IS:911:1986 and IS 3557 : 1965)
Non-percolating flexible fire fighting delivery hose
(third revision)
Rubber tubings for general purposes - Specification
(Second revision)
Vinyl coated fabrics (third revision)
Rubber hose for welding (fourth revision)
(Superseding IS : 3572 : 1968)
Agricultural spray hose of rubber with braided
textile reinforcement (second revision)
Barytes for rubber industry (second revision)
Red oxide of iron for rubber industry - Specification
(Second Revision)(Superseding IS 8219 : 1976)
Whiting for rubber industry (first revision)
Latex foam rubber products
Rubber hot water bottles (first revision)
IS 2037
IS 2089
IS 2244
IS 2482
IS 2789
IS 3322 : Part 1
IS 3399
IS 3400 : Part 1
IS 3400 : Part 2
IS 3400 : Part 3
IS 3565
IS 3692
IS 3701
IS 3867
IS 3400 : Part 4
IS 3400 : Part 5
IS 3400 : Part 6
IS 3400 : Part 7
IS 3400 : Part 8
IS 3400 : Part 9
IS 3400 : Part 11
IS 3400 : Part 12
IS 3400 : Part 13
IS 3400 : Part 14
IS 3400 : Part 15
Tracing cloth (first revision)
Common proofed canvas/duck and paulins
(tarpaulins) (second revision)
Glossary of terms relating to treated fabrics (first
revision)
Light duty water suction hose of rubber (second
revision)
Special proofed paulins (tarpaulins) (first revision)
Water-resistant clothing Part 1 PVC-coated fabrics
(first revision)
Zinc oxide for rubber industry (second revision)
Methods of test for vulcanized rubbers: Part 1
Tensile stress-strain properties (second revision)
Methods of test for vulcanized rubbers: Part 2
Hardness (second revision)
Methods of test for vulcanized rubbers: Part 3
Abrasion resistance using a rotating cylindrical drum
device (first revision)
Rubber teats for feeding bottles
Rubber closures, pharmaceutical (first revision)
Rubber protective sheaths (condoms) (first revision)
Rubber ice bags
Methods of test for vulcanized rubbers: Part 4
Accelerated ageing (second revision)
Methods of test for vulcanized rubbers: Part 5
Adhesion of rubbers to textile fabrics (second
revison)
Methods of test for vulcanized rubbers: Part 6
Resistance to liquids (first revision)
Methods of test for vulcanized rubbers: Part 7
Resistance to flex-cracking (first revision)
Methods of test for vulcanized rubbers: Part 8
Resistance to crack growth (first revision)
Methods of test for vulcanized rubbers: Part 9
Density (first revision)
Methods of test for vulcanized rubbers: Part 11
Determination of rebound resilience (first revision)
Methods of test for vulcanized rubbers: Part 012
Tear strength-crescent test piece
Methods of test for vulcanized rubbers: Part 13
Tension Set (first revision)
Methods of test for vulcanized rubbers: Part 14
Adhesion of rubber to metal (first revision)
Methods of test for vulcanized rubbers: Part 15
Volume resistivity of electrically conducting and
antistatic rubbers
IS 3400 : Part 16
IS 3400 : Part 17
IS 4135
IS 4148
IS 4355
IS 3400 : Part 18
IS 3400 : Part 19
IS 3400 : Part 20
IS 3400 : Part 22
IS 3549
IS 3768
IS 4501
IS 4770
IS 4810
IS 5137
IS 5192 : Part 1
IS 5192 : Part 2
IS 5193
IS 5270
IS 5680
IS 5915
IS 6058
IS 6110
IS 5797
IS 5821
Methods of test for vulcanized rubbers: Part 16
Measurement of cut growth of rubber by the use of
rose flexing machine
Methods of test for vulcanized rubbers: Part XVII
Tear strength-angular test piece
Hospital rubber sheetings (first revision)
Surgical rubber gloves (first revision)
Fire resistant brattice cloth (first revision)
Methods of test for vulcanized rubbers: Part 18
Stiffness at temperature (Gehman test) (first
revision)
Methods of test for vulcanized rubbers: Part 19
Permeability to gases (constant volume method)
Methods of test for vulcanized rubbers: Part 20
Resistance to cracking - Static strain test (first
revision)
Methods of test for vulcanized rubbers: Part 22
Chemical analysis
Water suction and discharge hose of rubber, heavy
duty (second revision) (Covers requirements of IS
2410:1963 also)
Ventilation ducting - Vinyl coated, flexible and
semi-rigid ( revision)
Aprons, rubberised, acid & alkali resistant (first
revision)
Rubber gloves for electrical purposes (first revision)
Fumigation sheets and covers, rubberized
Rubber hose for cement grouting (second revision)
(Superseding IS 5166 : 1969)
Natural rubber compounds - Specification : Part 1
for moulded (second revision)
Natural rubber compounds - Specification : Part 2
for extruded products (second revision)
Rubber sealing rings for domestic fruit and
vegetable preserving jars Specification (first
revision)
Rubber grommets for general purposes
Rubber tubing for medical use
Single texture rubberized water proof fabrics
Rubber components for transfusion fluid bottles
Double-texture rubberized waterproof fabrics (fourth
revision)
Rubber hose for aircraft refuelling and defuelling Specification ( Revision)
Hot-water hose of rubber (second revision)
(Superseding IS 5937:1970)
IS 6450
IS 6693
IS 6803
IS 6918
IS 7016 : Part 2
IS 7016 : Part 3
IS 7016 : Part 4
IS 7016 : Part 5
IS 7016 : Part 6
IS 7016 : Part 7
IS 7016 : Part 8
IS 7016 : Part 9
IS 7016 : Part 10
IS 7069
IS 7351
IS 7352
IS 7016 : Part 11
IS 7016 : Part 12
IS 7016 : Part 13
IS 7016 : Part 14
IS 7086 : Part 1
IS 7466
IS 7497
IS 7523
IS 7651
Rubbers for the dairy industry
Ebonite
Special proofed canvas and duck
Mercaptobenzothiazole
Methods of test for coated and treated fabrics Part 2
Determination of breaking strength and extension at
break (first revision)
Methods of test for coated and treated fabrics: Part 3
Tear strength (first revision)
Methods of test for coated and treated fabrics: Part 4
Resistance to damage by flexing (first revision)
Methods of test for coated and treated fabrics: Part 5
Determination of coating adhesion strength (first
revision)
Methods of test for coated and treated fabrics: Part 6
Bursting strength (first revision)
Methods of test for coated and treated fabrics: Part 7
Determination of resistance to penetration by water
(first revision)
Methods of test for coated and treated fabrics: Part 8
Accelerated ageing
Methods of test for coated and treated fabrics: Part 9
Determination of blocking resistance (first revision
Methods of test for coated and treated fabrics: Part
10 Rubber plastics coated fabrics - Low temperature
bend test (first revision)
Benzothiazyl-2-cyclohexyl sulphenamide (first
revision)
Styrenated phenol (first revision)
X-ray lead-rubber protective aprons
Methods of test for coated and treated fabrics: Part
11 Determination of flexibility - Flat loop method
Methods of test for coated and treated fabrics: Part
12 Determination of tack-tear resistance
Methods of test for coated and treated fabrics: Part
13 Determination of crush resistance
Methods of test for coated and treated fabrics: Part
14 Low temperature impact test
Methods of sampling and test for rubber
compounding ingredients, Part I
Rubber gaskets for pressure cookers - Specification
(First Revision)
High abrasion furnace (HAF) carbon black (first
revision)
Rubber catheter (urinary)
Wire reinforced, rubber covered hydraulic hose
IS 7654
IS 8134
IS 8135
IS 8164
IS 8189
IS 8483
IS 8698
IS 8699
IS 8851
IS 8862
IS 8891
IS 8979
IS 9406
IS 9407
IS 9481
IS 9491
IS 9573
IS 10130
IS 10228
IS 10357
IS 10358
IS 10387
IS 10655
IS 10660
IS 10733
IS 10908
IS 11355
IS 11659
IS 11884
IS 12076
IS 12492
(second revision)
Rubber hose for chemicals (first revision)
Intermediate super abrasion furnace (ISAF) carbon
black - Specification (second revision)
Fast extrusion furnace (FEF) carbon black Specification (second revision)
Hospital rubber sheeting without reinforcing fabric
Rubber hose for on-shore oil suction and discharge
services - Specification (first revision)
Dibenzothiazyl disulphide (first revision)
Expanded vinyl coated fabrics (first revision)
PVC coated fabrics for footwear industry
Sulphur for rubber industry - Specification (first
revision)
Titanium dioxide (anatase type) for rubber industry
Pine tar for rubber industry
Tetramethyl thiuram disulphide (first revision)
Calcium silicate for rubber industry
Light magnesium oxide for rubber industry
Specification for pillow, air
Specification for mattress, air
Rubber hose for liquefied petroleum gas (LPG) Specification (second
revision)
Vulcanized vegetable oils (Factice) for rubber
industry (first revision)
Specification for school bag
General purpose furnace [GPF (N-660)] carbon
black (first revision)
Super abrasion furnace (SAF) carbon black (first
revision)
Semi-reinforcing furnace [SRF-LM-NS(N-762) and
SRF-HM-NS(N-774)] carbon
black (first
revision)
Rubber steam hose
Rubber hydraulic hose with textile reinforcement
Electrically bonded road and rail tanker hose of
rubber, resistant to petroleum products
Flexible rubber tubing for liquefied petroleum gas
(first revision)
Phenyl- naphthylamine
Rubber hose for transferring anhydrous ammonia
Fire resistant brattice sheeting made from
unsupported plastics
Precipitated silica for rubber industry
Thermoplastics hoses (textile reinforced) for
IS 12585
IS 12656
IS 13217
IS 12649
IS 12657
IS 13071
IS 13422
IS 13978
IS 13981
IS 14127
IS 14128
IS 14424
IS 14597
IS 14611
IS 3660 : Part 1
IS 3660 : Part 2
IS 3660 : Part 3
IS 4588
IS 5188
IS 5189
IS 5190
IS 3660 : Part 4
IS 3660 : Part 5
compressed air
Thermoplastic hoses (textile reinforced) for waterGeneral purpose
Rubber or plastics hoses and tubing - Bending tests
Thermoplastics fumigation covers
Guide for selection of treated/coated fabrics for
various applications
Rubber and plastics hoses - Sub-ambient
temperature flexibility tests
Rubber hose, wire reinforced for sand and gravel
suction and discharge
services - Specification
Disposable surgical rubber gloves - Specification
Zinc Diethyl dithiocarbamate (ZDEC) Specification
Benzothizyl-N-Morpholinyl sulphenamide(MBS) Specification
Insoluble (Amorphous) sulphur for rubber industry Specification
N-(1,3-Dimethylbutyl)-N~-Phenyl
paraphenylenediamine (6 PPD) - Specification
Rubber threads - Specification
Synthetic tarpaulins (Heavy duty protective covers)
made from coated nylon or polyester fabrics Specification
Multilayered cross laminated sheets and
tarpaulins/covers - Specification
Methods of test for natural rubber: Part 1
Determination of dirt (NR:1) [Superseded a portion
of IS 3660(Part 51):1972]
Methods of test for natural rubber: Part 2
Determination of volatile matter (NR:2) [Supersedes
a portion of IS 3660(Part 51):1972]
Methods of test for natural rubber Part 3
Determination of ash (NR:3) [Supersedes a portion
of IS 3660(Part 51):1972]
Rubber, raw, natural
Cold polymerized oil extended raw styrenebutadiene rubber
Cold polymerized raw styrene-butadiene rubber
Code for packaging of natural rubber latex in drums
Methods of test for natural rubber: Part 4
Determination of total copper (NR:4) [Supersedes a
portion of IS 3660(Part 51):1972]
Methods of test for natural rubber:Part 5
Determination of Manganese (NR:5) [Supersedes a
portion of IS 3660(Part 51):1972]
IS 3660 : Part 6
IS 3660 : Part 7
IS 3660 : Part 9
IS 3660 : Part 11
IS 3660 : Part 12
IS 3660 : Part 13
IS 3708 : Part 1
IS 3708 : Part 2
IS 3708 : Part 3
IS 5430
IS 5599
IS 6306
IS 6611
IS 3708 : Part 4
IS 3708 : Part 5
IS 3708 : Part 6
IS 3708 : Part 7
IS 3708 : Part 8
IS 3708 : Part 9
IS 3708 : Part 10
Methods of test for natural rubber: Part 6
Determination of rubber hydrocarbon (NR:7)
[Supersedes a portion of IS 3660(Part 51):1972]
Methods of test for natural rubber: Part 7
Determination of Mooney Viscosity (NR:8)
[Supersedes a portion of IS 3660(Part 51):1972]
Methods of test for natural rubber: Part 9
Determination of solvent extract (NR:10)
[Supersedes a portion of IS IS 3660(Part 52):1968]
Methods of test for natural rubber: Part 11
Determination of Plasticity (NR:12) [Supersedes IS
3660(Part III):1971]
Methods of test for natural rubber: Part 12
Determination of plasticity retention index (PRI)
[NR:13] [Supersedes IS 3660(Part III):1971]
Methods of test for natural rubber: Part 13
Determination of colour (NR:4
Methods of test for natural rubber latex: Part 1
Determination of dry rubber content (NRL:1)
Methods of test for natural rubber latex: Part 2
Determination of sludge content (NRL:5)
Methods of test for natural rubber latex: Part 3
Determination of density (NRL:6)
Ammonia preserved concentrated natural rubber
latex
Methods for sampling of raw rubber
Methods of test for reclaimed rubber
Symbols for rubbers and latices
Methods of test for natural rubber latex: Part 4
Determination of total alkalinity (NRL:7)
Methods of test for natural rubber latex: Part 5
Determination of KOH - number (NRL:8)
Methods of test for natural rubber latex: Part 6
Determination of mechanical stability (NRL:9)
Methods of test for natural rubber latex: Part 7
Determination of volatile fatty acid number
(NRL:10)
Methods of test for natural rubber latex: Part 8
Determination of total nitrogen (NRL:12)
[Supersedes IS 3708(Part I):1966]
Methods of test for natural rubber latex: Part 9
Determination of total ash (NRL:16) [Supersedes IS
3708(Part I):1966]
Methods of test for natural rubber latex: Part 10
Determination of boric acid (NRL:17) [Supersedes
IS 3708(Part II):1968]
IS 3708 : Part 11
IS 4511 : Part 1
IS 4511 : Part 2
IS 4511 : Part 3
IS 7490
IS 7499
IS 8683
IS 4511 : Part 4
IS 4511 : Part 5
IS 4511 : Part 6
IS 4518 : Part I
IS 4518 : Part II
IS 7503 : Part 1
IS 7503 : Part 2
IS 7503 : Part 3
IS 7503 : Part 6
IS 9316 : Part 1
IS 9316 : Part 2
IS 11001
IS 11356
IS 12844
Methods of test for natural rubber latex: Part 11
Determination of magnesium (NRL:18) [Supersedes
IS 3708(Part II):1968]
Methods of test for styrene-butadiene rubber (SBR)
latices: Part 1 Determination of dry polymer content
(SBRL:1) [Supersedes IS 4511(Part I):1967]
Methods of test for styrene butadiene rubber (SBR)
Latice:Part 2 Determination of density SBRL: 6
[Supersedes IS 4511(Part I):1967]
Methods of test for Styrene butadiene rubber (SBR)
latices: Part 3 Determination of volatile unsaturates
[SBRL:8] [Supersedes IS 4511(Part I):1967]
Reclaimed rubber - Specification
Formulae for evaluation of natural rubber
Methods of test for raw acrylonitrile butadiene
rubber
Methods of test for styrene-butadiene rubber (SBR)
latices: Part 4 Determination of Bound styrene
(SBRL: 9) [Supersedes IS 4511(Part I):1967]
Methods of test for styrene-butadiene rubber (SBR)
latices: Part 5 Determination of soap content
(SBRL:10) [Supersedes IS 4511(Part I):1967]
Methods of test for styrene-butadiene rubber (SBR)
latices: Part 6 Determination of High-speed
mechanical stability (SBRL:11)
Methods of test for styrene-butadiene rubbers(SBR)
Part I Determination of volatile matter, total ash,
organic acid, soap, antioxidants, bound styrene and
mooney viscosity
Methods of test for styrene-butadiene rubbers: Part
II Determination of solvent extract and oil content
Glossary of terms used in rubber industry: Part 1
Definitions of Basic Terms
Glossary of terms used in rubber industry: Part 2
Definitions of Additives
Glossary of terms used in rubber industry: Part 3
Definitions relating to properties & testing
Glossary of terms used in rubber industry: Part 6
Definitions relating to cellular materials
Methods of test for rubber latex: Part 1
Determination of surface tension (RL:1)
Methods of test for rubber latex: Part 2
Determination of viscosity (RL:2)
Double centrifuged natural rubber latex
Styrene-butadiene rubber latex
Vinyl pyridine latex
IS 13101
IS 888
IS 9316 : Part 3
IS 9316 : Part 4
IS 9316 : Part 5
IS 9316 : Part 6
IS 9316 : Part 7
IS 9316 : Part 8
IS 9316 : Part 9
IS 10016 : Part 2
IS 10016 : Part
V
IS 11720 : Part 1
IS 11720 : Part 2
IS 11720 : Part 3
IS 11720 : Part 4
IS 587
IS 761
IS 1177
IS 1615
IS 1799
IS 1800
IS 11720 : Part 5
IS 13867
IS 326 : Part 2
IS 326 : Part 6
Ammonia preserved creamed natural rubber latex
Hollow ground razors, open type
Methods of test for rubber latex: Part 3
Determination of coagulum content (Sieve Residue)
(RL:3)
Methods of test for rubber latex: Part 4
Determination of total solids content (RL:4)
Methods of test for rubber latex: Part 5 Drawing of
samples (RL:5)
Methods of test for rubber latex: Part 6
Determination of pH (RL:6)
Methods of test for rubber latex: Part 7
Determination of total copper (RL:7)
Methods of test for rubber latex: Part 8
Determination of total iron (RL:8)
Methods of test for rubber latex: Part 9
Determination of total manganese (RL:9)
Methods of test for polybutadiene rubbers: Part 2
Determination of ash
Methods of test for polybutadiene rubbers: Part 5
Determination of gel content
Methods of test for synthetic rubber: Part 1
Determination of antioxidants (SR:1) [Supersedes a
portion of IS 4518(Part I):1967]
Methods of test for synthetic rubber: Part 2
Measurement of vulcanization characteristics with
oscillating disc curemeter (SR:2)
Methods of test for synthetic rubber: Part 3
Determination of Mooney Viscosity
Methods of test for synthetic rubber Part 4 :
Determination of volatile matter
Oil of geranium
Oil of ginger
Oil of vetiver roots (cultivated and KHUS)
Oil of Himalyan cedarwood
Citral
Geraniol
Methods of test for synthetic rubber Part 5 :
Determination of ash
Rubber standard temperatures, humidities and times
for the conditioning and time interval between
vulcanization and testing of test pieces
Methods of sampling and test for natural and
synthetic perfumery materials (Part 2) Preliminary
examination of perfumery materials and
Methods of sampling and test for natural and
IS 326 : Part 7
IS 326 : Part 8
IS 326 : Part 10
IS 326 : Part 11
IS 326 : Part 12
IS 326 : Part 14
IS 326 : Part 15
IS 328
IS 512
IS 526
IS 533
IS 326 : Part 16
IS 326 : Part 20
IS 1801
IS 1802
IS 2284
IS 3123
IS 3124
IS 3131
IS 3134
IS 3145
IS 3146
IS 3147
IS 3180
synthetic perfumery materials (Part 6) Determination
of solubility
Methods of sampling and test for natural and
synthetic perfumery materials (Part 7) Determination
of acid value
Methods of sampling and test for natural and
synthetic perfumery materials (Part 8) Determination
of ester value, content of esters and alcohols
Methods of sampling and test for natural and
synthetic perfumery materials (Part 10)
Determination of residue on evaporation
Methods of sampling and test for natural and
synthetic perfumery materials (Part 11)
Determination of carbonyl value aand content of
compounds
Methods of sampling and test for natural and
synthetic perfumery materials (Part 12)
Determination of phenols
Methods of sampling and test for natural and
synthetic perfumery materials (Part 14)
Determination of heavy metals
Methods of sampling and test for natural and
synthetic perfumery materials (Part 15) Detection of
petroleum and mineral oils
Oil of eucalpytus
Oil of citronella
Oil of palmarosa
Gum spirit of turpentine (oil of turpentine)
Methods of sampling and test for natural and
synthetic perfumery materials (Part 16)
Determination of melting point and melting range
Methods of sampling and test for natural and
synthetic perfumery materials: Part 20
Determination of boiling (Distillation) range
Citronellol
Ionones
Methods for olfactory assessment of natural and
synthetic materials
Hydroxycitronellal
Terpineol
Musk ambrette
Menthol
Musk xylol
Oil for celery seed_-Specification
Oil of dill
Linalyl acetate
IS 3228
IS 3241
IS 3250
IS 3349
IS 3398
IS 3504
IS 3858
IS 3924
IS 3925
IS 3926
IS 3927
IS 3928
IS 3929
IS 4272
IS 4273
IS 4603
IS 5164
IS 5752
IS 5753
IS 5754
IS 5757
IS 6597
IS 6698
IS 6699
IS 6774
IS 7696
IS 7697
IS 9257
IS 13261
IS 13358 : Part 1
IS 13358 : Part 2
IS 13358 : Part 3
IS 13358 : Part 4
IS 13358 : Part 5
IS 13582
IS 14507
Musk ketone
Geranyl acetate
Methyl ionone - Specification
Resinoid benzoin, pure
Oil of patchouli
Thymol
Benzylacetate - Specification
Benzyl alcohol
Eugenol
Methyl cinnamate
iso-butyl phenyl acetate
Styralyl acetate
Amyl salicylate
Vanillin
iso-Bornyl acetate
Phenyl ethyl alcohol
Iso-borneol
Yara yara
Alpha-Amyl cinnamic aldehyde - Specification
Phenyl acetic acid
Pine oil
Glossary of terms relating to natural and synthetic
perfumery materials
Oil of clove
Cinnamon leaf oil
Classification of essential oil-bearing aromatic
plants
Para cresyl methyl ether - Specification
Phenyl ethyl methyl ether-Specification
Oil of Eucalyptus Citriodora
Oil of Mentha citrata-Specification
Code of practice for cultivation of aromatic plants
Part 1 Geranium
Code of Practice for cultivation of aromatic plants
Part 2 Lemongrass
Code of Practice for cultivation of aromatic plants
Part 3 (Java)
Codes of cultural practices for aromatic plants: Part
4 Mentha (Japanese mint) and Mentha citrata
(Bergamint)
Codes of Practice for cultivation of aromatic plants:
Part 5 piperita (Peppermint) and Mentha spicata
(Spearmint)
Agarbatti - T
Diphenyl Ether
IS 14508
IS 263
IS 918
IS 1462
IS 1463
IS 2519
IS 2520
IS 2521
IS 2528
IS 2529
IS 2850
IS 2851
IS 3958
IS 3959
IS 3986
IS 4011
IS 4028
IS 4236
IS 4652
IS 4653
IS 4707 : Part 2
IS 4887
IS 5339
IS 5340
IS 5383
IS 6333
IS 6334
IS 6356
IS 6608
IS 7101
IS 7123
IS 7159
IS 7299
IS 7669
IS 7679
IS 7884
IS 8481
IS 8482
IS 9245
IS 9255
IS 9339
Oil of Jamrosa
Boric acid for cosmetic industry
Calcium carbonate, precipitated for cosmetic
industry
Talc for cosmetic industry
Kaolin for cosmetic industry
Calcium stearate for cosmetic industry
Zinc stearate for cosmetic industry
Magnesium stearate for cosmetic industry
Magnesium carbonate for cosmetic industry
Magnesium oxide for cosmetic industry
Zinc oxide for cosmetic industry
Titanium dioxide for cosmetic industry
Methods of sampling cosmetics
Skin powders
Sodium lauryl sulphate for cosmetic industry
Methods of test for safety evaluation of cosmetics
Beeswax, bleached for cosmetic industry
Glyceryl monostearate for cosmetic industry
Ethyl p-hydroxybenzoate for cosmetic industry
Methyl p-hydroxybenzoate for cosmetic industry
Classification for cosmetic raw materials and
adjuncts Part 2 List or raw materials generally not
recognized as safe for use in cosmetics
Petroleum jelly for cosmetic industry
Skin powder for infants
Lanolin, anhydrous for cosmetic industry
Tooth powder
Propyl p-hydroxybenzoate for cosmetic industry
Butyl p-hydroxybenzoate for cosmetic industry
Tooth paste
Skin cream
Coconut diethanolamide for cosmetic industrySpecification
Hair oils
Methods of test for henna powder
Mineral oil for cosmetic industry
Shampoo, soap-based
Hair cream
Shampoo synthetic detergent based
Oxidation, hair dyes, liquid
Cologne- Specification
Nail polish (nail enamel) - Specification
After shave lotion
Pomades and brilliantines
IS 9601
IS 9636
IS 9681
IS 9740
IS 9830
IS 9831
IS 9875
IS 10283
IS 10284
IS 10301
IS 10350
IS 10377
IS 10998
IS 11015
IS 11023
IS 11375
IS 11376
IS 11377
IS 11470
IS 11486
IS 11487
IS 12590
IS 13965
IS 14137
IS 14318
IS 294
IS 853
IS 1013
IS 1014
IS 1114
IS 2409
IS 2764
IS 3029
IS 4830
IS 5406
IS 5985
IS 6092 : Part 1
IS 6092 : Part 2
IS 6092 : Part 3
IS 6092 : Part 4
IS 6092 : Part 5
Sodium silicate for cosmetic industry
Depilatories, chemical
Stearic acid for cosmetic industry
Shaving cream
Water-soluble sodium carboxymethyl cellulose for
cosmetic industry
Sodium hydroxide for cosmetic industry
Lipstick
Ethyl acetate for cosmetic industry
Lipsalve
iso-Propyl alcohol for cosmetic industry
Powder hair dyes - Specification
p-Phenylenediamine
Bindi (liquid)
Ammonium chloride for cosmetic industry
Borax for cosmetic industry
Groundnut oil for cosmetic industry
Sesame oil for cosmetic industry
Guidelines for hygienic manufacture of cosmetics
Coconut oil for cosmetic industry
Castor oil for cosmetic industry
Sodium lauryl ether sulphate
Glycerine for cosmetic industry
Coconut methanolamide for cosmetic industry
Cetyl alcohol for cosmetic industry
Liquid foundation make-up - Specification
Superphosphate
Bone-meal, raw
Triple superphosphate
Bone-meal, steamed
Ammonium chloride, fertilizer grade
Calcium ammonium nitrate
Potassium sulphate, fertilizer grade
Castorseed cake for fertilizer purpose
Ammonium phosphate sulphate, granular
Urea, fertilizer grade
Code of practice for handling and storage of bagged
fertilizers
Methods of sampling and test for fertilizers (Part 1)
Sampling
Determination of nitrogen
Determination of phosphorus
Determination of potassium
Determination of secondary elements and
micronutrients
IS 6448
IS 6661
IS 7131
IS 7863
IS 8249
IS 8359
IS 8558
IS 8559
IS 9024
IS 12113
IS 13921
IS 13922
IS 2798
IS 6604
IS 7394
IS 7792
IS 6312
IS 7019
IS 7408 : Part 1
IS 7408 : Part 2
IS 7408 : Part 3
IS 7803 : Part I
IS 7803 : Part II
IS 7959
IS 8688
IS 8747
IS 9738
IS 9754
IS 9907
IS 10840
Diammonium phosphate - Specification
Potassium schoenite
Nitrophosphate based granulated fertilizers
Fertilizer physical mixtures
Zinc sulphate heptahydrate, agricultural grade Specification
Urea ammonium phosphate based fertilizers
NEEM cake for manuring
MAHUA cake for manuring
Granulated fertilizer mixtures
Ferrous sulphate heptahydrate, Agricultural Grade
Chelated zinc (as Zn-EDTA), agricultural grade Specification
Chelated iron (as Fe-EDTA), agricultural grade Specification
Methods of test for plastics containers
Code for packaging of solid pesticides (up to 1000
g)
Plastics containers for reserve fuel
Code of practice for handling plastics containers
Polyethylene containers for the transport of
materials - Specification
Glossary of terms in plastics and flexible packaging,
excluding paper
Blow moulded polyolefin containers Part 1 Up to 5
litres capacity
Blow moulded polyolefin containers Part 2 Over 5
litres up to 30 litres capacity
Blow moulded polyolefin containers Part 3 Closed
head containers over 30 litres, up to and including
200 litres capacity
Polyethylene containers for pharmaceutical use Part
I Other than parenteral and ophthalmic preparations
Plastic containers for pharmaceutical use Part II
Parenteral and ophthalmic preparations
Polyethylene containers for foam compounds
Plastics potable water bottles
Methods of tests for environmental stress-crack
resistance of blow-moulded polyethylene containers
Polyethylene bags for general purposes
High density polyethylene containers for packing of
liquid pesticides (up to 1 litre capacity)
High density polyethylene (HDPE) crates for 500-ml
glass milk bottles
Blow moulded HDPE containers for packing of
IS 11342
IS 11584
IS 11805
IS 12007
IS 12395
IS 11343
IS 11352
IS 12512
IS 12724
IS 12787
IS 12883
IS 12887
IS 13123
IS 13289
IS 14129
IS 14537
IS 414
IS 417 : Part 2
IS 417 : Part 3
IS 417 : Part I
IS 417 : Part V
IS 827
IS 828
IS 829
IS 830
IS 831
IS 417 : Part VI
IS 2205
vanaspati
Packaging - Jacks maade from thermoplaastic films Description and of measurement
High density polyethylene (HDPE) crates for milk
satchets
Polyethylene pouches for packaging liquid milk
Laminated collapsible tubes
Disposable trash bags of plastics
Packaging - Sacks made from thermoplastic films Vocabulary
Flexible pouches for the packing of vanaspati upto 5
kg or 5 litres - Specification
HDPE containers - for liquid pesticides - capacity
over 1 and upto 5 litres
Flexible packaging materials for packing of refined
edible oils
Polyethylene air bubble film
Polyvinyl chloride (PVC) bottles for edible oils
Polyethylene terephthable (PET) bottles for
packaging of edible oils
Packing of liquids pesticides-polyethylene
terephthalate(PET)bottles(up to one litre capacity)
Polypropylene/Impact copolymer (PPCP) crates for
milk satchets
Flexible packaging materials for the packing of
vanaspati in 10 kg and kg packs
Polyethylene terephthalate (PET) bottles for
packaging of alcoholic liquor
Guts for tennis, badminton and squash racket
Footballs, volleyballs, basket balls, netballs,
throwballs and balls: Part 2 Volleyballs
Footballs, volleyballs, basket balls, netballs,
throwballs and balls: Part 3 Basketballs
Footballs, volleyballs, basket balls, netballs,
throwballs and balls: Part I Footballs
Footballs, volleyballs, basket balls, netballs,
throwballs and balls: Part V Throwballs
Sinew guts for tennis and badminton rackets
Cricket bats
Hockey sticks
Tennis racket frames
Badminton racket frames
Footballs, volleyballs, basket balls, netballs,
throwballs and balls:Part VI Water-polo balls
Tube inflated footbal bladders
IS 2216
IS 2459
IS 2460
IS 2461
IS 2462
IS 2463
IS 2578
IS 2719
IS 3345
IS 3659
IS 3785
IS 3800
IS 3923
IS 4141
IS 4142
IS 4143
IS 4144
IS 4385
IS 4386
IS 4387
IS 4613
IS 4614
IS 4630
IS 4973
IS 4979
IS 4980
IS 5172
IS 5196
IS 5214
IS 5458
IS 5459
IS 5535
IS 5739
IS 6479
IS 6599
IS 6621
IS 6783
IS 6869 : Part I
IS 6869 : Part III
IS 6869 : Part IV
IS 6869 : Part V
Tennis balls
Horizontal bars used in gymnastics
Pommelled horse, vaulting horse and vaulting buck
used in gymnastics
Balancing beams used in gymnastics
Parallel bars used in gymnastics
Rings used in gymnastics
Squash racket frames
Carrom boards
Sports nets
Table tennis balls
Wicket keeping gloves
Batting gloves
Leg-guards for cricket batsmen and wicket-keepers
Table tennis rackets
Discus
Carrom-draughts
Carrom-strikers
Throwing hammers
Putting shots
Asymmetric bars
Javelins
Hurdles
Barbell set
Badminton woollen balls
Table-tennis table
Clubs, Indian
Balancing bench
Chest expander
Jumping and vaulting standards
Rounders ball
Base balls
Rugby ball
Track and field equipment (sports goods for schools)
Balls, punching
Vaulting boxes
Cricket stumps and bails
Basketball frames
Playground equipment for parks: Part I General
requirements
Playground equipment for parks: Part III Horizontal
ladders
Playground equipment for parks: Part IV Jungle
gyms (or castle climbers)
Playground equipment for parks: Part V Parallel bars
IS 6974
IS 6978
IS 8012
IS 8404 : Part I
IS 8404 : Part II
IS 8594
IS 8694
IS 9195 : Part 1
IS 10771
IS 10800
IS 10830
IS 10831
IS 10832
IS 10833
IS 11588
IS 11589
IS 11729
IS 11974
IS 10888
IS 12425
IS 867
IS 1998
IS 2221
IS 2530
IS 4669
IS 7188
IS 8543 : Part 4 :
Sec 1
IS 8543 : Part I :
Sec 1
IS 13360 : Part 1
IS 13360 : Part 2
: Sec 1
Abdomen guards for sports use
Chess pieces
Spring dumb-bells
Fixed playground equipment for schools: Part I
General requirements
Fixed playground equipment for schools: Part II
Climbing ropes
Ball, medicine
Latex bladders, seamless, valve type
Gymnasium equipment: Part 1 General requirements
Leg guards for hockey goal keepers
Cricket balls
Gymnastic equipment-Landing mats and surfaces for
exercises-Determination of hardness and impact
damping
Gymnastic equipment-Landing mats (2000 mm x
1250 mm x 60 mm) (IS 5174 : 1969)
Gymnastic equipment-Surfaces for floor exercisesMats
Gymnastic equipment-Surfaces for floor exercisesBoards
Beating boards
Jump stands
Handballs
Badminton metallic racket frames
Method for determination of resistance to slipping of
gymnastic mats and surfaces for floor exercises
Dimensions for steeplechase hurdles
Methods of test for phenolic moulding materials
Methods of test for thermosetting synthetic resin
bonded laminated sheets
Methods of test for aminoplastic moulding material
Methods of test for polyethylene moulding materials
and polyethylene compounds
Methods of test for polyvinyl chloride resins
Methods of test for cellulose acetate flakes
Methods of testing plastics Part 4 Short term
mechanical properties Section 1 Determination of
tensile properties
Methods of testing plastics Part 1 Characterization
of polymer structure and size, Section 1
Determination of molecular mass from viscosity
Plastics - Methods of Testing : Part 1 Introduction
Plastics - Methods of test Part 2 Sampling and
preparation of test specimens Sec 1 Compression
IS 13360 : Part 2
: Sec 2
IS 13360 : Part 2
: Sec 4
IS 666 : Part 2
IS 1995
IS 13360 : Part 2
: Sec 7
IS 13360 : Part 3
: Sec 3
IS 13360 : Part 3
: Sec 4
IS 13360 : Part 3
: Sec 5
IS 13360 : Part 3
: Sec 7
IS 13360 : Part 4
: Sec 1
IS 13360 : Part 5
: Sec 1
IS 13360 : Part 5
: Sec 2
IS 2013
IS 2014
IS 2015
IS 2161
IS 13360 : Part 5
moulding test specimens of thermoplastics materials
Plastics - Methods of Testing Part 2 Sampling and
Preparation of Test Specimen Sec 2 Compression
moulding of test specimens of thermosetting
materials
Plastics - Methods of Testing: Part 2 Sampling and
Preparation of Test Specimens Sec 4 Preparation of
Test Specimens by Machining
Jig bushes:Part 2 Renewable drill bushes
Overall internal heights for lathe tool posts
Methods of testing plastics: Par 2 Sampling and
preparation of test specimens Sec 7 Preparation of
test specimens with specified reversion - Amorphous
thermoplastics: Plates
Plastics - Methods of Testing Part 3 Physical and
Dimensional Properties Sec 3 Determination of
Apparent Density of Moulding material that can not
be poured from a specified funnel [Superseding IS
8543
Plastics - Methods of Testing Part 3 Physical and
Dimensional Properties Sec 4 Determination of
bulk-factor of moulding materials
Plastics - Methods of Testing Part 3 Physical and
Dimensional Properties Sec 5 Determination of
shrinkage and post-shrinkage of thermosetting
materials
Plastics - Methods of testing Part 3 Physical and
dimensional properties Section 7 Liquid resins Determination of density by the pyknometer method
Plastics - Methods of Testing Part 4 Rhcological
propertiess Sec 1 Determination of melt mass-flow
Rate (MFR) and the Melt Volume-Flow Rate
(MVR) of thermoplas tics
Plastics - Methods of Testing Part 5 : Mechanical
Properties Sec 1 Determination of Tensile Properties
- General Principles
Plastics - Methods of Testing Part 5 : Mechanical
Properties Sec 2 Determination of Tensile Properties
- Test Conditions for Moulding and Extrusion
Plastics
T-Slots- Dimensions and Spacing
T-bolts - specification
T-nuts
Coolant pumps for general purpose machine tools specification
Plastics - Methods of Testing Part 5 : Mechanical
: Sec 4
IS 13360 : Part 5
: Sec 5
IS 13360 : Part 5
: Sec 6
IS 13360 : Part 5
: Sec 7
IS 13360 : Part 5
: Sec 10
IS 13360 : Part 5
: Sec 13
IS 13360 : Part 5
: Sec 23
IS 13360 : Part 5
: Sec 24
IS 13360 : Part 6
: Sec 1
IS 2243
IS 2534
IS 2804
IS 13360 : Part 6
: Sec 3
IS 13360 : Part 6
: Sec 4
IS 13360 : Part 6
: Sec 10
IS 13360 : Part 7
: Sec 1
IS 13360 : Part 8
Properties Sec 4 Determination of Izod Impact
Strength
Plastics - Methods of Testing Part 5 : Mechanical
Properties Sec 5 Determination of Charpy Impact
Strength
Plastics - Methods of testing Part 5 Mechanical
properties Section 6 Determination of Impact
Resistance by the Free-failing dart method Staircase methods
Plastics - Methods of Testing Part 5: Mechanical
Properties Sec 7 Determination of Flexural
Properties
Plastics - Methods of Testing Part 5 : Mechanical
Properties Sec 10 Determination of Tear resistance
of Plastics Film and Sheeting - Trouser Tear Method
Plastics - Methods of Testing Part 5 Mechanical
Properties Section 13 Determination of Rockwell
Hardness
DEC
Plastics - Methods of Testing Part 5 : Mechanical
Properties Sec 23 Determination of Tear resistance
of Plastics Film and Sheeting - Elmendorf Method
Plastics - Methods of testing Part 5 Mechanical
properties Section 24 Determination impact
resistance by the free falling dart method Instrumental puncture test
Plastics - Methods of testing:Part 6 Thermal
Properties Sec 1 Determination of vicat softening
temperature of thermoplastic materials
Drill chucks
Carbide tipped dead centres
Palm grips - Specification
Plastics - Methods of testing Part 6 Thermal
Properties Sec 3 Determination of temperature of
deflection under load - General test method
Plastics - Methods of Testing Part 6 Thermal
properties Sec 4 Determination of the burning
behaviour of horizontal and vertical specimens in
contact with a small-flame ignition source
Plastics - Methods of testing:Part 6 Thermal
Properties Sec 10 Determination of melting
behaviour (melting temperature or melting range) of
semi-crystalline polymers
Plastics - Methods of Testing Part 7 Electrical
Properties Sec 1 Measurement of Resistivity of
Conductive Plastics
Plastics - Methods of Testing Part 8
: Sec 2
IS 13360 : Part 8
: Sec 3
IS 13360 : Part 8
: Sec 4
IS 13360 : Part 8
: Sec 5
IS 13360 : Part 8
: Sec 6
IS 2805
IS 2876
IS 13360 : Part 9
: Sec 4
IS 13360 : Part
11 : Sec 7
IS 14504
IS 2582 : Part 1
IS 2582 : Part 2
IS 2582 : Part 3
IS 2890
IS 2904
IS 2908
IS 2909
IS 2975
IS 2990
IS 2995
IS 2996
Permanence/Chemical Properties Sec 2 Aqueous
Dispersions of Polymers and Copolymers Determination of pH
Plastics - Methods of Testing Part 8
Permanence/Chemical Properties Sec 3
Determination of the effects of liquid chemicals,
including water
Plastics - Methods of Testing Part 8
Permanence/Chemical Properties Sec 4
Determination of Loss of Plasticizers - Activated
Carbon Method
Plastics - Methods of Testing Part 8
Permanence/Chemical Properties Sec 5
Determination of Migration of Plasticizers
Plastics - Methods of Testing Part 8
Permanence/Chemical Properties Sec 8
Determination of Gas Transmission Rate of Films
and Thin Sheets under Atmospheric Pressure Manometric Method
Dimensions for ball grips
3-jaw and 4-jaw scroll operated self-centring lathe
chucks
Plastics - Methods of Testing Part 9 Optical
properties Sec 4 Qualitative evaluation of the
bleeding of colorants
Plastics - Methods of Testing Part 11 Special
properties Sec 7 Determination of matter extractable
by organic solvents (Conventional methods)
Natural Gas - Calculation of calorific values,
density, relative density and Wobbe Index from
composition
Machine tools - Spindle noses and face plates - Sizes
for interchangeability Part 1 Type A
Machine tools - Spindle noses and face plates - Sizes
for interchangeability Part 2 Camlock types
Machine tools - Spindle noses and face plates - Sizes
for interchangeability : part 3 Bayonet type
Taper handles for machine tools
Ball handles - Specification
Hand cranks - Specification
Star grips - Specification
Control levers with ball grips - Specification
Tenons
Set collars
Mounting dimensions of plain grinding wheels by
means of hub flanges
IS 3048
IS 3075 : Part 1
IS 3075 : Part 3
IS 3793
IS 4279
IS 4291
IS 4292
IS 4293
IS 4294
IS 4295
IS 4297
IS 4298
IS 4502
IS 4816
IS 5091
IS 5092
IS 5094
IS 5095
IS 5096
IS 5097
IS 5250
IS 5251
IS 5252
IS 5998
IS 5999
IS 6081
IS 6082
IS 6090
IS 6105
IS 6238
IS 6336
IS 6337
IS 6338
IS 6440
IS 7262
IS 7301
IS 8710
IS 9094 : Part 1
IS 10573
IS 10574
IS 7824
IS 10602
IS 10612
Dimensions for hand wheels
Dimensions for circlips:Part 1 For shafts
Dimensions for circlips:Part 3 Type E for shafts
Live centres
Goose neck clamps
C-washers - specification
Strap clamps
U-type clamps
Jig buttons
Locking dogs (catches) with springs
spherical washers and conical seats - specification
Swing C-washers - specification
Machine vices
Permanent magnetic chucks
Dimensions for circular base plates
Dimensions for square and rectangular base plates
Dimensions for diamond locating pins
End locating plugs - Specification
Dimensions for round locating studs
Dimensions for diamond locating studs
Swing clamps
Table clamps
Wide clamp plates
Parallel sided clamp plates
Swing latches
Plain clamps
Slotted clamps
Cam operated clamps
Feed fingers
Spring collets
Screws for thrust pads (fixtures) - specification
Thrust pads (fixtures) - specification
Clamping screws (fixtures) - specification
Quick action drilling jigs
Turning mandrels - specification
Grinding mandrels
Electro-magnetic chucks
Drill chuck taper arbors Part 1 Having taper shanks
Oil sight glass for machine tools
Clamp buttons to be used with parallel sided clamp
plates
Quick change drill chucks, collets and floating
reamer holders specification
Floor plates
4-Jaw independent lathe chucks
IS 10882
IS 11278
IS 11325
IS 11613
IS 11614
IS 11831
IS 11843
IS 12242
IS 12250
IS 12280
IS 12281
IS 12525
IS 12582
IS 13178
IS 1878 : Part 1
IS 1878 : Part 2
IS 1878 : Part 3
IS 2063
IS 2199
IS 2218
IS 2308
IS 2310
IS 2182
IS 2200
IS 2367
IS 2425
IS 2426
IS 2538
IS 2743
IS 2877
IS 2987
Cam levers
Jig feet with cylindrical shanks
Adjustable clamp support
Renewable lock screw locating pins
Renewable threaded locating pins
Jig foot bolt
Jig foot nut
Door hinges for machine tools
Fixed clamp supports
Tenon without counterbore
Mounting dimensions of machine tool doors with
hinges
Snap rings
Tommy screws with fixed bars - specification
Clamping studs for machine tools - Specification
Test chart for general purposes parallel lathes:Part 1
Lathes with swing over bed up to 800 mm
Test chart for general purposes parallel lathes:Part 2
Lathes with swing over bed over 800 mm and up to
1600 mm
Test chart for general purposeparallel lathes Part 3:
Lathes with swing over bed over 1600mm ad upto
2500mm
Acceptance code for machine tools - Geometric
accuracy of machines operating under no-load or
finishing conditions
Radial drilling machines - Test chart
Speeds and feeds for machine tools
Test chart for slotting machines
Test chart for shaping machines
Symbols to be given on indication plates of machine
tools - Recommendations
Test chart for milling machines with table of
variable height with horizontal spindle
Test chart for box type vertical drilling machines
Test chart for pillar type vertical drilling machines
Test chart for bench drilling machines
Test chart for bench grinders
Test chart for surface grinding machines with
horizontal grinding wheel spindle and reciprocating
table
Test chart for single and double column planing
machines
Direction of operation of controls for machine tools
- Recommendations
IS 3080
IS 3405
IS 3691
IS 3694
IS 6040
IS 6197
IS 6679
IS 7229
IS 7266
IS 7286
IS 7287
IS 6893 : Part 1
IS 6893 : Part 2
IS 6893 : Part 3
IS 6893 : Part 4
IS 6893 : Part 5
IS 6893 : Part 6
IS 6893 : Part 7
IS 6893 : Part 8
IS 6893 : Part 10
IS 6893 : Part 11
IS 6893 : Part 12
Test chart for universal tool and cutter grinders
Test chart for power hacksaw machines (upto 300
mm round bar capacity)
Woodworking machines - Table band sawing
machines-Nomenclature and acceptance conditions
Test chart for wood working turning lathes
Test chart for precision lathes - Lathes with swing
over bed up to 500 mm and distance between centres
up to 1500 mm
Test chart for vertical boring and turning mills with
table diameter up to 1600 mm
Test chart for general purpose gear shaping
machines(Table diameter upto 1000 mm)
Recommended working level heights for
woodworking machines
Test chart for woodworking slot mortising machines
Test chart for woodworking single chain mortising
machines
Recommended working dimensions for
woodworking machines
Proforma for purchase specification for machine
tools:Part 1 General purpose parallel lathes and
precision lathes
Proforma for purchase specification for machine
tools:Part 2 Horizontal/universal knee-type milling
machines
Proforma for purchase specification for machine
tools:Part 3 Radial drilling machines
Proforma for purchase specification for machine
tools:Part 4 Vertical turning and boring lathes
Proforma for purchase specification for machine
tools:Part 5 Milling machines with table of variable
height with vertical spindle
Proforma for purchase specification for machine
tools:Part 6 Bench/pillar type drilling machines
Proforma for purchase specification for machine
tools:Part 7 External cylindrical grinding machines
with horizontal spindle
Proforma for purchase specification for machine
tools:Part 8 Internal cylindrical grinding machines
with horizontal spindle
Proforma for purchase specification for machine
tools:Part 10 Copying lathes
Proforma for purchase specification for machine
tools:Part 11 Capstan and turret lathes
Porforma for purchase specification for machine
IS 7227
IS 8099
IS 8165
IS 9474
IS 7228
IS 7249
IS 7267
IS 7289
IS 7294
IS 8107
IS 8131
IS 8407
IS 9722
IS 9723
IS 9809
IS 10188
IS 10190
IS 10941
IS 10949
IS 11011
IS 11016
IS 10575
tools:Part 12 Horizontal boring and milling
machines (table type)
Recommended diameters of wheels for
woodworking table band sawing machines
Sizes of collars for circular saw blades for
woodworking machines
Test chart for manually operated dividing heads for
machine tools
Principles of mechanical guarding of machinery
Recommended spindle diameters for woodworking
machines with rotating bored tools
Wood working machines - Thickness planing
machines with rotary cutter blocks of one side
dressing - Nomenclature and acceptance conditions
Test chart for woodworking surface planing
machines with cutterblock for one-side dressing
Test chart for woodworking planing machines for
two, three or four side dressing
Woodworking machines _ Single blade circular saw
benches with or without travelling table Nomenclature and acceptance conditions
Wood working machines - Routing machines Nomenclature and acceptance condition
Test chart for circular tables for machine tools (table
diameter upto 630 mm)
Test chart for gear hobbing machines, standard
precision (vertical axis)
Dimensions for modular units for machine tool
construction-slide units
Dimensions for modular units for machine tool
construction-multi-spindle heads- casing and input
drive shaft dimensions
Test chart for crankshaft grinding machines
Dimensions for modular units for machine tool
construction - wing bases for columns
Test chart for copying lathes with horizontal spindlelathes with swing over bed upto 500 mm and
distance between centres upto 1500 mm
Sizes for dovetail guideways for machine tools
Code of practice for painting procedure for machine
tools
Glossary of terms relating to woodworking
machines
General safety requirements for machine tools and
their operation
Dimensions for modular units for machine tool
IS 10576
IS 10988
IS 11107
IS 11118
IS 11133
IS 11398 : Part 1
IS 11398 : Part 2
IS 11648
IS 11846
IS 11958 : Part 1
IS 12106
IS 12295
IS 12850
IS 13214
IS 13635
IS 13993
IS 13543
IS 13552
IS 13634
IS 13640
IS 13934
IS 2515
construction - Rotary tables
Dimensions for modular units for machine tool
construction - Wing bases for slide units
Method of measuring noise from machine tools
(excluding testing in anechoic chambers)
Dimensions for modular units for machine tool
construction - columns
Guidelines for technical evaluation of general
purpose parallel lathes
Recommendations for symbols for lubrications
appearing on machine tools
Test chart for horizontal spindle capstan, turret and
single spindle automatic lathes:Part 1 Machinable
bar diameters greater than 25 mm
Test charts for horizontal spindle capstain, turret and
single spindle automatic lathes Part 2 Machinable
bar dia. 25 mm or less and chuck dia. upto 160 mm
Nomenclature for modular machine tools
Dimensions for modular units for machine tool
construction - Tennon drive and flanges for
mounting multi-spindle heads
Test chart for boring and milling machines with
horizontal spindle:Part 1 Table type machines
Dimensions for modular units for machine tool
construction - spindle units_nits
Test chart for external cylindrical centreless grinding
machines
Modular units for machine tool construction Support brackets
Machine tools - Ergonomics anthropometric
terminology
Numerical control of machines - Symbols
Test chart for universal milling machine with a
swivelling table
Modular units for machine tool construction - Centre
bases and columns
Test chart for surface grinding machines with
vertical grinding wheel spindle and reciprocating
table
General introduction for milling machines with table
of variable height, with horizontal or vertical spindle
General introduction for milling machines with table
of fixed height, with horizntal or vertical spindle
Test charts for surface grinding machines with two
colomns for grinding slideways
Test chart for guillotine shears
IS 4296
IS 4592
IS 4593
IS 4918
IS 6652 : Part 1
IS 6652 : Part 2
IS 6652 : Part 3
IS 7468
IS 7469
IS 7664
IS 7706
IS 7707
IS 8064
IS 8127
IS 8711
IS 9266 : Part 1
IS 9266 : Part 2
IS 9266 : Part 3
IS 9266 : Part 4
IS 9888
IS 10068 : Part 1
IS 10068 : Part 2
IS 10068 : Part 3
IS 10068 : Part 4
IS 10068 : Part 5
Dimensions for round piercing punches
Test chart for gap frame presses
Test chart for straight sided presses
Hard Metal (Carbide) wire, bar and tube drawing
dies
Glossary of terms relating to metal forming
machines and tools:Part 1 Metal forming tools
Glossary of terms relating to metal forming
machines and tools:Part 2 Metal forming machines
relating to sheet metal
Glossary of terms relating to metal forming
machines and tools:Part 3 Metal forming technology
and operations relating to sheet metal
Recommendation on preferred strokes for
mechanical and hydraulic presses
Recommendations on preferred capacities for
mechanical and hydraulic presses
Guide posts for press tool sets
Bolster plates for gap frame presses without die
cushion
Bolster plates for gap frame presses with die cushion
Method of designation of mechanical presses
Guide bushes for press tool sets
Capacities and dimensions for gap frame open-back
presses (inclinable and non-inclinable)
Press working die sets - boss type:Part 1 Centre post
rectangular die sets
Press working die sets - boss type:Part 2 Centre post
square die sets
Press working die sets - boss type:Part 3 Centre post
round die sets
Press working die sets - boss type:Part 4 Centre post
reverse rectangular die sets
Dimensions for sintered pellets hard metal(carbide)
for wire, bar and tube drawing dies
Press working die sets (plain type):Part 1 Centre
post rectangular die sets
Press working die sets (plain type):Part 2 Centre
post square die sets
Press working die sets (Plain type):Part 3 Centre
post round die sets
Press working die sets (Plain type) Part 4 Rear post
rectangular die sets
Press working die sets (plain type) Part 5 Rear post
square die sets
IS 10068 : Part 6
IS 10644
IS 10650
IS 10731
IS 11344
IS 11505
IS 11372
IS 11443
IS 11524
IS 11684
IS 11742
IS 12665 : Part 1
IS 12665 : Part 2
IS 12665 : Part 3
IS 12665 : Part 4
IS 12665 : Part 5
IS 12665 : Part 6
IS 12665 : Part 7
IS 12852
IS 12984
IS 14497
IS 1931 : Part 1
IS 1931 : Part 2
IS 1931 : Part 3
IS 1931 : Part 4
IS 1931 : Part 5
IS 2027
IS 2028
Press working die sets (plain type) Part 6 Rear post
round die sets
Recommendation for preferred shut heights for
mechanical presses
Pressure pins
Dimensions for slide face opening for locating the
shanks
Dimensions for sintered carbide pellets used in
heading dies
Recommendations on terminology of hardmetal
heading dies
Proforma for purchase specification and technical
features for belt drop hammers
Dimensions for machined plates for press tools,
moulds, jigs and fixtures
Carbide mandrels for tube drawing dies
Test chart for spinning and planishing lathes
Test chart for die sets
Press working tools - Shanks:Part 1 General
dimensions and survey
Press working tools - shanks:Part 2 Shanks to suit
rivetting
Press working tools - shanks:Part 3 Shanks with
screwed shaft
Press working tools - shanks:Part 4 Shanks with
neck and collar
Press working tools - Shanks Part 5 Shanks with
square flanges
Press working tools - Shanks Part 6 Shanks with
rectangular flanges
Press working tools - Shanks Part 7 Shanks with
screwed shaft and collar
Gap frame hydraulic presses upto 4000 KN Recommendation on preferred capacities and
dimensions
Proforma for purchase specification for plate
bending machines
Capacity rating and dimensions for trimming presses
Files:Part 1 Technical supply conditions
Files:Part 2 Engineers' files
Files:Part 3 Saw files
Files:Part 4 Mill files
Files:Part 5 Special purpose files
Spanners and sockets - Widths across flats
2pen jaw wrenches (spanners)
IS 2029
IS 2030
IS 2615
IS 3082
IS 3152
IS 3529
IS 3552
IS 3568
IS 3569
IS 3587
IS 3650
IS 4003 : Part 1
IS 4003 : Part 2
IS 4095
IS 4123
IS 4378 : Part 1
IS 4378 : Part 2
IS 4481
IS 4485
IS 4500
IS 4508
IS 4595
IS 4806
IS 5006
IS 5066
IS 5067
IS 5068
IS 5087
IS 5122
IS 5167
IS 5200
IS 5658
IS 5995
IS 6002
IS 6078
IS 6086
IS 6118
IS 6129
IS 6130
IS 6131
IS 6149
IS 6293
IS 6374
Ring wrenches (spanners)
Box spanners
Pliers, pincers and nippers - Technical supply
conditions
Hexagonal socket screw keys
Needle files
Eyelet pliers
Pliers - Flat nose without cutter, long
Round nose pliers
Burner pliers
Rasps
Combination side cutting pliers
Pipe wrenches Part 1 General purpose
Pipe wrenches Part 2 Heavy duty
Pincers
Chain pipe wrenches
Nippers:Part 1 Diagonal cutting nippers
Nippers:Part 2 End cutting nippers
Duck-bill pliers
Track spanners for railways
Pipe wrenches, foot print type
Open ended slugging wrenches (spanners)
General requirements for non-sparking tools
Heat-coil pliers
Battery terminal pliers
Glass pliers
Fencing pliers
Grab hook
Wire stripping pliers
Tyre levers
Punched open-jaw wrenches (spanners)
Bolt clippers
Snipe nose pliers
Pipe grip pliers
Tommy bars for box spanners
Lineman's pliers
Parallel action flat nose pliers
Multiple slip-joint pliers
Square box wrenches (spanners)
Single square socket tee wrenches (spanners)
Technical requirements for hand operated wrenches
(spanners) and sockets
Single-ended open-jaw adjustable wrenches
Assembly tools for screws and nuts - Nomenclature
Hexagonal box wrenches (spanners)
IS 6379
IS 6389
IS 7145
IS 7214
IS 7268
IS 7381
IS 7663
IS 7939
IS 7975 : Part 1
IS 7975 : Part 2
IS 7989
IS 7990
IS 7991
IS 7993
IS 7996
IS 8669
IS 8672
IS 9063
IS 10372
IS 11379
IS 11526
IS 11847
IS 11848
IS 11874
IS 12403
IS 12453
IS 12470
IS 12476
IS 12480
IS 12481
IS 12521
IS 12577
IS 12985
IS 13323
IS 13610
IS 13636
Single ended ring wrenches (spanners)
Combination wrenches with equal openings
Technical supply condition for torque wrenches
Driving squares for hand socket wrenches
Click type torque wrenches
Hand operated square drive socket wrenches
Box spanners for rail screws
Flare nut wrench, double ended, flat
Driving parts for hand-operated square drive socket
wrenches:Part 1 Technical supply conditions
Driving parts for hand-operated square drive socket
wrenches:Part 2 Dimensions
Pliers for internal circlips
Pliers for external circlips
Attachments for hand operated square drive socket
wrenches
Power operated square drive socket wrenches
(Impact)
Driving squares for power socket wrenches
Hexagon drive ends for power tools - Dimensions
Pliers-flat nose without cutter, short
Hook spanners
Lock grip pliers
Wrenches for retaining screw for milling arbor
Nomenclature for pliers, pincers and nippers
Spoke wrenches for bicycle and moped
Crowfoot spanners
Hexagonal socket offset wrenches
Spanners for conveyors belt - fasteners
Nut drivers
Square drive extension for hexagon insert bits for
power socket wrenches
Hexagon drive extensions (adaptors) for hexagon
insert bits for power socket wrenches
Spiral tapered screw extractors
Hexagonal insert bits for hexagon socket head cap
screws and hexagon socket set screws for power
tools
Cross rim wrenches
Sealing pliers
Toggle lever assisted end cutting nippers
Slip joint pliers
Electronics pliers and nippers - Nomenclature
Pliers and nippers for electronics - Technical supply
conditions
IS 13761
IS 13762
IS 13763
IS 13887
IS 13888
IS 402
IS 413
IS 13764
IS 13765
IS 13766
SP 53
IS 510
IS 552
IS 704
IS 841
IS 842
IS 844 : Part 1
IS 844 : Part 2
IS 844 : Part 3
IS 1759
IS 2586
IS 2587
IS 2588
IS 2989
IS 5169
IS 5657
IS 5663
IS 5684
IS 5697
IS 5991
IS 6000
IS 6546
IS 6836
IS 6837
IS 6841
IS 6843
IS 6860
Pliers and nippers for electronics - Single purpose
nippers - end cutting nippers
Pliers and nippers for electronics - Single purpose
nippers - diagonal cutting nippers
Pliers and nippers for electronics - Single purpose
nippers - oblique cutting nippers
Nippers - Lever assisted - Diagonal cutting
Nippers - Lever assisted - End cutting
Cold chisels
Round punches
Pliers and nippers for electronics -Single purpose
pliers-Round nose pliers
Pliers and nippers for electronics -Single purpose
pliers - Flat nose pliers
Pliers and nippers for electronics - Single purpose
pliers-Snipe nose pliers
Hand operated hand tools - Safety code for the use,
care and protection
Blacksmith's anvils
Smith bits
Crow-bars and claw-bars
Steel hammers
Smith swages
Screwdriver:Part 1 Technical supply conditions
Screwdrivers:Part 2 Dimensions
Screwdrivers:Part 3 Dimensions for screw drivers
for recessed head screws
Powrahs
Bench vices
Pipe vices (open side type and fixed sides type)
Blacksmith's vices
Keys for lathe chucks
Hacksaw frames
Jim crows
Brick and mason's chisels
Pipe vices (chain type)
Ripping chisels
Ballast rakes
Rail tongs for railways
Claw hammers
Hand snaps and set-ups for solid rivets
Three wheel type pipe cutters
Wrecking bars
Technical supply conditions for pipe cutters
Pin punches
IS 6861
IS 6864
IS 6881
IS 6883
IS 6892
IS 7040
IS 7077
IS 7222
IS 7958
IS 8177
IS 8668
IS 8670
IS 8671
IS 8673
IS 9064
IS 9065
IS 9193
IS 10375
IS 10827
IS 10838
IS 10839
IS 10883
IS 11381
IS 11458
IS 11828
IS 11940
IS 11941
IS 12153
IS 12166
IS 12167
IS 12168 : Part 1
IS 12522
IS 12578
IS 12858
IS 13040
IS 12168 : Part 2
IS 13093
IS 13189
IS 663
IS 703
Engineers' scrappers
Metal marking punches
Link type pipe cutters
Ballast screen
Blacksmith's bick-iron
Smiths' anvil cutters
Bending bars
Engineers' ratchet braces
Hand vices
Pin vices
Dimensions for spiral ratchet screw driver shanks
Screwdrivers for hexagon insert bits
Nail puller
Farrier's chisels with handle
Copper hammers
Aluminium hammers
Bearing pullers
Poker
Roving punches
Nylon faced hammers
Jeweller's saw
Single wheel type pipe cutters
Extractor cotter pin
Parallel clamps
Miniature hand hacksaw frames
Hide faced hammers
Hand burnishers
Adaptors for hexagonal inserts bits for use with
ratchet screw driver
Ratchet screwdrivers
Spiral ratchet screwdrivers
Screwdriver bits for use with ratchet
screwdrivers:Part 1 For slotted head screws
Rubber mallets
Watch maker's hammer, flat face
Belt punches for conveyor belt fasteners (plate type)
Dolly blocks for use in sheet body repairs - General
requirements
Screwdriver bits for the use with ratchet
screwdrivers:Part 2 For cross recessedhead screws
Sheet metal body repair steel hammers - General
requirements
Lead hammers
Adzes
Axes
IS 1930
IS 2852
IS 3108
IS 4017
IS 4057
IS 5098
IS 6375
IS 6835
IS 6844
IS 6891
IS 7041
IS 7042
IS 7125
IS 8202
IS 10826
IS 10860
IS 10886
IS 11250
IS 11251
IS 11832
IS 12127
IS 12128
IS 12412
IS 12413
IS 12515
IS 12627
IS 12651
IS 12652
IS 12696
IS 12704
IS 13345
IS 13379
IS 13380
IS 5441
IS 6572
IS 6573
IS 6574
Chisels and gouges
Carpenter's augers - Specification
Forestry tools - Pruning saw
Carpenter's squares
Carpenters' adjustable metal bodied bench planes
Cross cut and rip saws
Wood splitting wedges
Drifts
Wood and leather marking punches
Carpenters' auger bits
Carpenters' plain brace
Carpenters' ratchet brace
Technical supply conditions for carpenters' braces
Carpenters' wooden bodied nose planes without
ramshorn handle
Pad saws
Carpenters wooden bodied bead planes
Carpenters' vice
Bow saw frames
Bow saw blades
Cut-irons and cap-irons for carpenters' metal bodied
bench planes
Two-men cross cut saws
Reversible handles for cross cut saws
Setting iron for two-men cross cut saws
Wooden jointer for two-men cross cut saws
Wooden setting cat for two-men cross cut saws
Forestry tools - Loop handles, two-men cross cut
saws
Forestry tools - Setting anvil for raker toothed twomen cross cut saws
Forestry tools - Raker adjuster-cum-setting iron for
two-men cross cut saws
Forestry tools - Setting pliers, bow saw blade
Forestry tools wooden jointer for bow saw blade
Carpenter's bevels
Forestry tools - Wooden setting cat, bow saw blades
Forestry tools - Hole punch, bow saw blades
Portable pneumatic drilling machines
Dimensions for pneumatic light rivet snap shanks
and its chuck bushings
Dimensions for pneumatic coal pick shanks and
chuck bushings
Dimensions for pneumatic rivet snap shanks parallel
and chuck bushings
IS 6575
IS 7157
IS 7446
IS 7456
IS 7605
IS 7868
IS 7913
IS 7978
IS 7979
IS 7995
IS 8067
IS 9419
IS 9707
IS 8486
IS 9828
IS 10749
IS 11183
IS 11609
IS 11702 : Part 2
IS 12158
IS 12520
IS 12523
IS 12531
IS 12563 : Part 1
IS 12563 : Part 2
IS 12849
IS 13078
IS 14368
IS 551
IS 715 : Part 1
IS 715 : Part 2
Dimensions for pneumatic breaker and spade shanks
and its chuck bushings
Portable pneumatic grinding machines
Dimensions for chisel shanks and chuck bushings
for pneumatic chippers
Rock drill shanks and chuck bushings - Dimensions
Portable pneumatic chippers
Rotary drill rods for drilling principally in coal
Integral stems for percussive drilling
Portable pneumatic rivet cutters
Portable pneumatic riveting hammers
Pneumatic concrete breaker shanks - Dimensions
Portable pneumatic impact wrenches
Pusher legs - Specification
Pneumatic screw drivers and nut runners (Non
Impact type)
Code of practice for maintenance of tungsten carbide
tipped integral stems
Portable pneumatic sanders
Swivel head nut for screw type mounts in pusher
legs
Portable pneumatic rammers
Technical supply conditions for pneumatic tools
Measurement of airborne noise emitted by
pneumatic tools and machines Part 2: Method for
checking compliance with noise limits
Dimensions for shanks of punches and chisels and
its chuck bushing for pneumatic rivet cutter
Recommendations for preferred pressures for
pneumatic tools and machines
Dimensions for piston rods and butts for pneumatic
rammer tools
Dimensions for weld flux scalers shanks and nozzle
holes
Data sheet for pneumatic tools test report:Part 1
Rotary tools
Data sheet for pneumatic tools test report:Part 2
Percussive tools(with or without rotation)
Pneumatic tools and machines - Vocabulary
Pneumatic hose couplings
Portable Pneumatic weld flux scalers
Bonded abrasive products (other than diamond/cubic
boron nitride) - Marking system
Coated abrasive Part 1 General applications
Coated abrasives Part 2 Special and mechanical
IS 1004
IS 1249
IS 1262
IS 2324 : Part 1
IS 1991 : Part 1
IS 1991 : Part 4
IS 1991 : Part 5
IS 1991 : Part 6
IS 1991 : Part 7
IS 1991 : Part 8
IS 1991 : Part 9
IS 1991 : Part 10
IS 2794
IS 2817
IS 3178
IS 3264
IS 3755
IS 5201
IS 5319
IS 8915
IS 9291
IS 10489
IS 10519
IS 11026
IS 12057
IS 10960 : Part 1
IS 10960 : Part 2
IS 10986
IS 12099
applications
Valve grinding compound
Recommendations for selection of grinding wheels
Abrasive specialities
Bonded abrasive grinding wheels:Part 1 Profiles and
types
Safety requirements for the use, care and protection
of abrasive grinding wheels:Part 1 Definitions
Safety requirements for the use, care and protection
of abrasive grinding wheels:Part 4 Safety guards
Safety requirements for the use, care and protection
of abrasive grinding wheels:Part 5 Flanges
Safety Requirements for the use, care and protection
of abrasive grinding wheels:Part 6 Inspection and
mounting
Safety requirements for the use, care and protection
of abrasive grinding wheels:Part 7 Standard speeds
Safety requirements for the use, care and protection
of abrasive grinding wheels:Part 8 Special speeds
Safety requirements for the use, care and protection
of abrasive grinding wheels:Part 9 General operating
rules
Safety requirements for the use, care and protection
of abrasive grinding wheels:Part 10 Mounted wheels
Truing tools single diamond
Methods for sampling of coated abrasives
Abrasive emery grain
Dimensions for diamond grinding wheels
Emery fillets
Methods for sampling of abrasive emery grain
Commercial steel wool
Dimensions for depressed centre wheels
Dimensions for internal grinding wheels
Steel dresser for abrasive wheels
Diamond abrasive circular segmental saws
Razor hones
Dimensions for honing stones
Grain sizes for diamond or cubic boron nitride:Part 1
Designation and grain sizes distribution
Grain sizes for diamond or cubic boron nitride:Part 2
Method of test of macro grits
General survey, designation and nomenclature of
diamond or cubic boron nitiride grinding wheels and
saws
Triangular polishing blocks for use in floor polishing
IS 12686
IS 13068
IS 13520
IS 13521
IS 13564
IS 13596
IS 13998
IS 14369
IS 14370
IS 1715
IS 1850
IS 3239
IS 4914
IS 4921
IS 5099
IS 5100
IS 5102
IS 5103
IS 5104
IS 5105
IS 5106
IS 5362
IS 5363
IS 5364
IS 5366
IS 5443
IS 5445
IS 5446
IS 5447
IS 5568
IS 5618
IS 5693
machines
Grading of diamond powder in sub-sieve size
Bonded abrasive products - Static balancing of
grinding wheels
Diamond abrasive frame saw blades
Marking systems of diamond/CBN products
Selection of diamond and cubic boron nitride
grinding wheels
Dimensional tolerances on grinding wheels
Multi point and impregnated diamond dressers
Abrasive belts - Dimensions and Selection of
Width/Length Combinations
Determination of magnetic matter in artificial
abrasives - test methods
Dimensions for self holding taper
Dimensions for shank diameters and driving squares
for rotating tools
Die stock for circular screwing dies
Tap wrenches, adjustable
Extension bars
Technical supply conditions for twist drills
Twist drills, parallel shanks, stub series for right
hand cutting
Twist drills, parallel shank, long series
Twist drills, morse taper shanks
Twist drills, oversize morse taper shank
Twist drills, taper square shanks for ratchet braces
Twist drills, taper square shanks for carpenter's
braces
Twist drills, parallel shanks, stub series, left-hand
cutting for automatics
`icro-drills
Twist drills for taper pin holes with taper 1:50
Core drills, morse taper shanks
High speed steel reamers - Technical supply
conditions
Long fluted machine reamers with morse taper
shank
Machine chucking reamers with parallel shanks
Machine chucking reamers with morse taper shanks
Dimensions for tenons and cross slots for tools with
bore taper 1:30
Circular thread cutting dies for conduit threads
Countersinks 90 deg with parallel shanks and solid
pilots
IS 5703
IS 5704
IS 5705
IS 5710
IS 5907
IS 5918
IS 5919
IS 5926
IS 5927
IS 5936
IS 5989
IS 6171
IS 6173 : Part 1
IS 6173 : Part 2
IS 6175 : Part 1
IS 6175 : Part 2
IS 6175 : Part 3
IS 6175 : Part 4
IS 6175 : Part 5
IS 6175 : Part 6
IS 6175 : Part 7
IS 6175 : Part 8
IS 6702
Countersinks 90 deg with morse taper shanks and
detachable pilot
Counterbores with parallel shanks and solid pilots
Detachable pilots for use with counterbores and
countersink 90 deg
Counterbores with morse taper shanks
Socket reamers with morse taper shanks
Taper pin, machine reamers with morse taper shank
Machine bridge reamers
Shell reamers
Reduction sleeves 7/24 taper to morse taper
Arbor with morse taper shanks for shell tools
Hole mills - Specification )
Screwing taps - Technical supply conditions for
screwing taps
Screwing taps-Dimensions and tolerances on
threaded portion:Part 1 For ISO metric screw threads
(Superseding IS 9169:1979)
Screwing taps - Dimensions and tolerances on
threaded portion:Part 2 For pipe threads G, Rp and
Rc series
Screwing taps:Part 1 Hand and short machine
srewing taps for ISO metric screw/threads Sizes
from M1 to M 2.5
Screwing taps:Part 2 Hand and short machine
screwing taps for ISO metric screw threads - Sizes
from M3 to M10
Screwing taps:Part 3 Hand and short machine
screwing taps for ISO metric screw threads - Sizes
from M3 to M68 with coarse pitch and from M3 to
with fine pitches
Screwing taps:Part 4 Long shanks machine screw
taps for ISO metric screw threads sizes from M3 to
M24 (Superseding IS7821:1975)
Screwing taps:Part 5 Nut screwing taps for ISO
metric screw threads sizes from M3 to M68 with
coarse pitches (Superseding IS 6174:1971)
Screwing taps:Part 6 Hand screwing taps for pipe
threads parallel G series (superseding IS 6172:1972)
Screwing taps:Part 7 Hand screwing taps for pipe
threads parallel Rp series(Superseding IS
6172:1972)
Screwing taps:Part 8 Hand screwing taps for pipe
threads taper Rc series (Superseding IS 7796:1975)
Morse taper reduction sleeves (superseding IS
2608:1964)
IS 6709
IS 6710
IS 6776
IS 7766
IS 7772
IS 7778
IS 7822
IS 7823
IS 8305
IS 8306
IS 8307
IS 8918
IS 8919 : Part 1
IS 8919 : Part 2
IS 8919 : Part 3
IS 8919 : Part 4
IS 9771
IS 10293
IS 10514
IS 10571
IS 10851
IS 10884
IS 10915
IS 11002
IS 11127
IS 11351
IS 10885
IS 10952
IS 11172 : Part 1
IS 11172 : Part 2
Centre drills Type B
Centre drills Type R
Knurling wheels
Twist drills for jig boring machines
Shell core drills
Method for sampling inspection procedure for small
tools
Twist drills morse taper shank extra long series
Twist drills parallel shank, extra long series
Twist drills, morse taper shank, long series
Carbide tipped twist drills, morse taper shanks
Carbide tipped, twist drills, parallel shank
Dimensions for spindle noses for adjustable adaptors
Adjustable adaptors for tools with self-holding taper
shanks:Part 1 Short adaptors
Adjustable adaptors for tools with self holding taper
shanks:Part 2 Long adaptors
Adjustable adaptors for tools with self holding taper
shanks:Part 3 Extra long adaptors
Adjustable adaptors for tools with self holding taper
shanks:Part 4 Clamping nuts
Carbide tipped core drills with morse taper shanks
Dimensions for optional recess on morse taper
shanks for tools
Split taper socket for tools with parallel shank and
driving tenon
Split taper sockets for tools with parallel shank,
driving square and driving tenon
Taper pin machine reamers with parallel shanks
Carbide tipped chucking reamers with parallel
shanks
Terms, definitions and type of twist drills
Machine jig reamers morse taper shank (superseding
IS 6091-1971)
Holders for knurling wheels
Dimensions for stub self holding tapers
Carbide tipped chucking reamers with morse tapeer
shanks with short cutting edge
Recommendations for drills for use prior to tapping
screw threads (superseding IS:3230 & 5617)
Recommendations for tool shanks for numerically
controlled machine tools (tool stationary type):Part 1
Cylindrical shanks
Recommendations for tool shanks for numerically
controlled machine tools (tool stationary type):Part 2
IS 11173 : Part 1
IS 11173 : Part 2
IS 11440
IS 11934
IS 11935
IS 11937
IS 11938
IS 11949
IS 11950
IS 12319
IS 12320
IS 12321
IS 12322
IS 12323
IS 12324
IS 12325
IS 12687
IS 12688
IS 12690
IS 13303
IS 13304
IS 13776
IS 14532
Prismatic shanks
Recommendations for tool shanks 7/24 taper for
numerically controlled machine tools with automatic
tool changers (tools rotating type) Part Tool shanks
Recommendations for tool shanks 7/24 taper for
numerically controlled machine tool with automatic
tool changers (tools rotating type):Part Retention
knobs
Reduction sleeves 7/24 taper to cylindrical
Carbide tipped shell reamers
Carbide tipped chucking reamers with morse taper
shank with long cutting edge
Carbide tipped machine jig reamer with morse taper
shank
Tools adaptors for numerically controlled machine
tools (tools rotating type)
Turret sockets
Tool adaptors for numerically controlled machine
tools (tool stationary type)
Circular screwing dies - General table of dimensions
Technical supply conditions for circular screwing
dies
Circular screwing dies for ISO metric threads
Circular screwing dies for taper pipe threads - R
Series
Circular screwing dies for parallel pipe threads - G
Series
Hexagonal die nuts
Circular screwing dies for ISO metric conduit pipe
threads
Small tools -Sub-land drills with morse taper shanks
for holes prior to tapping Screw threads
Small tool - Sub-land twist drills with morse taper
shanks for clearance holes and countersinks for
countersunk head screws
Small tools-Sub-land twist drills with morse taper
shanks for clearance holes and counterbores for
slotted cheese head metric screws
Countersinks 60 deg,90 deg and 120 deg. with
morse taper shanks- Specification
Countersinks 60 deg,90 deg and 120 deg. with
parallel shanks-Specification
Machine tools - Morse taper shanks - Cotter slots
with taper key
Reduction sleeves with tenon drive with external and
internal 7/24 taper ISO Dimensions
IS 1830
IS 2340
IS 2594
IS 2668
IS 2670
IS 2671
IS 5030 : Part 1
IS 5030 : Part 2
IS 5031
IS 5360
IS 6255
IS 6256
IS 6257
IS 5030 : Part 3
IS 6285
IS 6308
IS 6309
IS 6310
IS 6314
IS 6322
IS 6323
IS 6324
IS 6325
IS 6326
IS 6353
IS 6354
IS 6355
IS 6388
IS 6550
IS 6681
IS 7773
IS 8611
IS 8614
IS 8615
IS 8616
IS 8619
IS 8620
Technical supply conditions for milling cutters
Dimensions for self-release 7/24 tapers for milling
arbors and tool shanks
Hacksaw blades
T-slot milling cutters
Thread milling cutters (shell type)
Interlocked milling cutters
Metal cutting bandsaw blades:Part 1 Definition and
terminology
Metal cutting bandsaw blades:Part 2 Tolerance
Saws - Metal slitting
Dimensions for driving tenons
Inverse dove tail and dove tail milling cutters
50 Degree shell end single angle milling cutters
Shell end mills
Metal cutting bandsaw blades:Part 3 Dimensions
and requirements
Dimensions for interchangeability of milling cutters
and milling arbors with key drive
Side and face milling cutters
Cylindrical milling cutters
Dimensions for interchangeability of milling cutters
and milling arbors with tenon drive
Single corner rounding milling cutters
Concave milling cutters
Convex milling cutters
Single angle milling cutters
Double angle milling cutters
Equal angle milling cutters
End mills with parallel shanks
End mills with morse taper shanks
Keyway milling cutters
Slot drills with morse taper shanks
Thread milling cutters with parallel shanks
Dimensions for self-release 7/24 tapers for spindle
noses for milling machines
Holding dimensions for broaching tools
Technical supply conditions for milling arbors and
accessories
Milling arbors with self-release 7/24 taper
Stub milling arbors with self-release 7/24 taper
Stub milling arbors with self-release 7/24 taper with
key
Bearing collars for milling arbors
Clamping nuts for milling arbors
IS 8621
IS 8692
IS 8731
IS 8732
IS 8733
IS 9322
IS 9323
IS 9324
IS 9325
IS 9326
IS 10140
IS 10255
IS 10465
IS 10591
IS 11741
IS 11829
IS 11835
IS 12536
IS 12537
IS 12538
IS 12716 : Part 1
IS 12716 : Part 2
IS 13167
IS 13244
IS 14168
IS 1983
IS 2428
IS 3019
IS 4022
IS 8842
Retaining screws for milling arbors
Dimensions for parallel shanks for milling cutters
Technical supply conditions for general purpose
gear hobs
Single start gear hobs with axial keyway
Tolerances for single start gear hobs
Technical supply conditions for carbide tipped
milling cutters
Carbide tipped end mills with parallel shanks
Carbide tipped end mills with morse taper and
tapped end shank
Carbide tipped slot drills with parallel shanks
Carbide tipped slot milling cutters with morse taper
and tapped end shanks
Bandsaw blades for woodworking
Tapered die-sinking cutter with parallel shanks
Chain wheel rotary tooth form milling cutter
Segmental saws for cold sawing
Circular saws for wood working
Miniature hand hacksaw blades
Dimensions of driving system of tool chuck (end
mill holders) with clamp screws for flatted parallel
shank tools
Disk type gear shaper cutter
Small Tools- Hub type gear shaper cutters
Shank type gear shaper cutters
End mills with indexable inserts:Part 1 With flatted
parallel shanks
End mills with indexable inserts:Part 2 With morse
taper shanks
Side and face milling (slotting) cutters with
indexable inserts
Half side and face milling cutters with indexable
inserts
Slitting cutters with indexable inserts
Shank sections for single point turning and planning
tools
Application of carbides for machining, ranges of
application and colour code
High speed steel butt welded single point turning
tools
Indexable hardmetal (carbide) inserts with rounded
corners, without fixing hole - Dimensions
High speed steel butt welded single point planing
tools
IS 9775
IS 9897
IS 10412
IS 11143
IS 11441
IS 11522 : Part 1
IS 11677
IS 11943 : Part 1
IS 11943 : Part 2
IS 11943 : Part 3
IS 11943 : Part 4
IS 11943 : Part 5
IS 11943 : Part 7
IS 11943 : Part 8
IS 11943 : Part
12
IS 11943 : Part 6
IS 11943 : Part 9
IS 11943 : Part
10
IS 11943 : Part
11
IS 12354
IS 12728
IS 13740
IS 13741 : Part 1
IS 13741 : Part 2
IS 13741 : Part 3
IS 13741 : Part 4
Dimensions for carbide flats, squares and rounds
Indexable inserts for cutting tools - Designation
System of designation and marking of single point
cutting tools with carbide tips
Ground high speed steel tool bits
Dimensions for ground carbide rounds
Recommendations for basic quantities in cutting and
grinding (Part 1) Geometry of the active part of
cutting tools, general terms, reference systems, tools
& working angles & chip breakers.
Dimensions for indexable (throwaway) carbide
inserts with cylindrical fixation hole
Hard metal burrs:Part 1 Technical supply conditions
Hard metal burrs:Part 2 Cylindrical burrs (Type A)
Hard metal burrs:Part 3 Cylindrical round (ball) nose
burrs (Type C)
Hard Metal burrs:Part 4 Spherical burrs (Type D)
Hard metal burrs:Part 5 Oval burrs (Type E)
Hard metal burrs:Part 7 Arch pointed-nose burrs
(Type G)
Hard metal burrs:Part 8 Flame burrs (Type H)
Hard metal burrs:Part 12 Inverted cone burrs (Type
N)
Hard metal burrs:Part 6 Arch round (ball) nose burrs
(Type F)
Hard metal burrs:Part 9 60 and 90 degree cone burrs
(Type J & K)
Hard metal burrs:Part 10 Conical round (ball) nose
burrs (Type L)
Hard metal burrs:Part 11 Conical pointed nose burrs
(Type M)
Indexable carbide inserts with partly cylindrical
fixation hole
Carbide tips for dead centre - specification
Carbide tipped single point tools - Technical supply
conditions (superseding IS 2163 : 1976)
Carbide tips Part 1Carbide tips for single point tools
(superseding IS 2162 : 79)
Part 2 Carbide tips for single point tools for light
cutting operations (superseding IS 8065 : 1976)
Part 3 Carbide tips for single point tool blanks for
sliding head type automats (Superseding IS 12294 :
1988)
Part 4 Carbide tips for multipoint tools (superseding
IS 9327 : 1979)
IS 13741 : Part 5
IS 13741 : Part 6
IS 13741 : Part 7
IS 13742 : Part 8
IS 5107
IS 5109
IS 7513
IS 13742 : Part 1
IS 13742 : Part 2
IS 13742 : Part 3
IS 13742 : Part 4
IS 13742 : Part 5
IS 13742 : Part 6
IS 13742 : Part 7
IS 13742 : Part 9
IS 14617 : Part 2
IS 5108
IS 8208
IS 10129
IS 10411
IS 11245
IS 11337
IS 12484
Part 5 Carbide tips for twist drills for point ngle 115
degree(superseding IS 8301 : 1976)
Part 6 Carbide tips for single point threading tools
(superseding IS 2162 : 1979)
Part 7 Carbide tips for single point round nose
turning tools.
Part 8 Boring tool (ISO 8) (superseding IS 2163 :
1976)
Recommendation on nominal pressure for oil
hydraulic system elements
Recommendation on nominal bores for oil hydraulic
system elements
Graphical symbols for fluid power systems
Carbide tipped single point tools - ISO series : Part 1
Straight turning tool (ISO 1) (superseding IS 2163 :
1976)
Part 2 Cranked turning and facing tool (ISO 2)
(superseding IS 2163 : 1976)
Part 3 Cranked finishing tool (ISO 3) (superseding
IS 2163 : 1976)
Part 4 Broad turning tool (ISO 4) (superseding IS
2163 : 1976)
Part 5 Cranked facing tool (ISO 5) (superseding IS
2163 : 1976)
Part 6 Cranked turning tool (ISO 6) (superseding IS
2163 : 1976)
Part 7 Parting off tool (ISO 7) (superseding IS 2163
: 1976)
Part 9 Boring and facing tool (ISO 9) (superseding
IS 2163 : 1976)
Indexable inserts for cutting tools - Hardmetal
(carbide) inserts with rounded corners, with partly
cylinderical fixing hole Part 2: Dimensions of inserts
with 11 degree normal clearance
Recommendation on nominal rates of flow for oil
hydraulic system elements
Sizes for cylinder bores and piston rod diameter for
fluid power systems
Dimensions and identification code for mounting
flange and shaft end for hydraulic fluid powerpositive displacement pumps and motors
Recommendations on nominal strokes for fluid
power cylinder
Purchase specification for pneumatic cylinder
Purchase specification for hydraulic cylinder
Cup seals for fluid power applications
IS 12485
IS 12597
IS 10983
IS 11146
IS 11147
IS 11277
IS 11845 : Part 1
IS 11845 : Part 2
IS 11845 : Part 3
IS 13542
IS 13876 : Part 1
IS 13876 : Part 2
IS 13876 : Part 3
IS 14235
IS 14236
IS 14645
IS 8386
IS 14237
IS 8383
IS 8384
IS 8532
IS 9269
IS 10069
Metal bonded seals
Recommendation on units for fluid power system
Fluid power - cylinders - Housing for piston and rod
seals in reciprocating applications - Dimensions and
tolerances - Recommendations
Recommendation for bore and rod area ratios for
hydraulic cylinders
Recommendations for parameter definitions and
letter symbols for hydraulic fluid power pumps,
motors and integral transmissions
Recommendations for characteristic quantities and
designation of hydraulic fluid power gas loaded
accumulators with separators
Fluid logic circuits for fluid power systems - Part 1
symbols for binary logic and related functions
Fluid logic circuits for fluid power systems - Part
2:Symbols for supply and exhausts as related to
logic symbols
Fluid logic circuits for fluid power systems - Part
3:Symbolsfor logic sequences and related functions
Hydraulic fluid power - contamination analysis method for reporting analysis data
Guide for marking system for fluid power
components - Part 1 Cylinders
Guide for marking system for fluid power
components - Part 2 Valves
Guide for marking systems for fluid power
components - Part 3 Pumps and motors
Wiper seals used for fluid power application
Seals for reciprocating applications used in fluid
power systems - Methods of test
Fluid power systems and components - Cylinders Nominal pressure
Method of test for end load rating of oil hydraulic
filter elements
U-type seals with asymmetrical and symmetrical lips
used for fluid power application
Method of test for fabrication integrity of oil
hydraulic filter elements
Method of test for collapse/burst resistance of oil
hydraulic filter elements
Method of test for flow fatigue characteristics of oil
hydraulic filter elements
Evaluation of pressure drop versus flow
characteristics of hydraulic filter elements and filters
Hydraulic fluid power - Positive displacement
IS 10187
IS 10481
IS 10585
IS 11003
IS 11559
IS 11560
IS 12593
IS 13053
IS 14601
IS 989
IS 3148
IS 3743
IS 13085
IS 13102
IS 13103
IS 13434
IS 13533
IS 13534
IS 13535
IS 13569
IS 13570
IS 13571
pumps, motors and integral tranmissions Determination of steady state performance
Recommendations for mounting surfaces for fourport directional control valves
Guide for applications and installation of oil
hydraulic systems
Method of test for cylinders for oil hydraulic
systems
Recommendations for mounting dimensions for
hydraulic fluid power-single rod cylinders 160 bar
medium series bore 25 to 500 mm
Hydraulic fluid power - Cylinders - Rod end
spherical eyes - Mounting Dimensions
Hydraulic fluid power - Cylinders - Rod end plain
eyes - Mounting Dimensions
Hydraulic fluid power - Single rod cylinder 160 bar
(16 MPa) Compact series - Tolerences
Hydraulic fluid power system - Commissioning and
maintenance of complete hydraulic systems Recommendations
Method of presenting performance data for
hydraulic pumps
Scissors for general purposes
Slide fasteners (general purpose)
Hair clippers (hand operated)
Hydraulic fluid power - Single rod cylinders, 160
bar (16 MPa) - Medium series - Port dimensions
Hydraulic fluid power - Single rod cylinders, 250
bar (25 MPa) series - Port dimensions
Hydraulic fluid power - Single rod cylinders, 160
bar (16 MPa) compact series - Port dimensions
Hydraulic fluid power - Single rod cylinders, 160
bar (16 MPa) medium and 250 bar (25 MPa) series Tolerences
Fluid power cylinders - Piston rod thread dimensions
and types
Hydraulic fluid power - Valves - Determination of
pressure differntial /flow characteristics
Hydraulic fluid power - Filters - Multipass method
for evaluating filtration pe rformance
Hydraulic fluid power - Fluid sample containers Qualifying and controlling cleaning methods
Hydraulic fluid power - Particulate contamination
analysis - Extraction of fluid samples from lines of
an operating system
Hydraulic fluid power - Calibration of automatic
IS 14148
IS 4066
IS 4084
IS 4108
IS 4274
IS 4741
IS 4798
IS 14150
IS 14602
IS 14604
IS 8526
IS 10143
IS 12498
IS 12723
IS 12725
IS 12738
IS 13086
IS 13617
IS 5041
IS 5349
IS 5650
IS 14530
IS 14531
count instruments for particles suspended in liquids Method using classified AC fine dust contaminant
Hydraulic fluid power - Pressure control valves
(excluding pressure relief valves), sequence valves ,
unloading valves, throttle valves and check valvesMounting surfaces
Metal hooks, clips and eyes
Eyelets and washers (sail)
Snap fasteners for dresses
Buckles
Snap fasteners (four pieces)
Safety pins
Hydraulic fluid power - Pressure relief valves Mounting surfaces
Installation methods of testing of positive
displacement hydraulic pumps & motors
Proforma for purchase specification for positive
displacement pumps and motors used in oil
hydraulic systems
Sizes for bores and port threads for pneumatic
cylinders - Recommendations
Pneumatic fluid power-single rod cylinders, 1000
kpa (10 bar) series, with detachable mountings,
bores from 32 mm to 250 mm- Mounting
dimensions
Method of test for evaluation of performance of air
pressure regulators
Pneumatic fluid power - Single rod cylinder - 1000
kPa (10 bar) series - Bores from 8 mm ro 25 mm Mounting dimensions
Guide for application and installation of pneumatic
fluid power systems
Pneumatic fluid power - Single rod cylinders, 1000
Kpa (10 bar) series, with integral mountings, bores
from 32 mm to 250 mm - Mounting dimension
Pneumatic fluid power - Cylinders 10 bar (1000
kPa) series - Rod end spherical eyes - Mounting
dimensions
Evaluation of pressure drop versus flow
characteristics of pneumatic filters - Method of test
Footwear and stationery eyelets
Staplers
Clips, paper
Manipulating industrial robots - Safety
Manipulating industrial robots - presentation of
characteristics
IS 6321
IS 6421
IS 6422
IS 13547 : Part 1
IS 6021
IS 7370
IS 7371
IS 7671
IS 7672
IS 8156
IS 14533
IS 14663
IS 9211
IS 9435
IS 9726
IS 9727
IS 10791
IS 11422
IS 11432
IS 11571
IS 13391
IS 13894
IS 14224
IS 1543
IS 3169
IS 3174
IS 14221
IS 14272 : Part 1
IS 14413
IS 14495
Needles, hand sewing
Perforators, paper double hole
Perforators, paper, single hole (Docket punch)
Manipulating industrial robots - Mechanical
interfaces - Part 1 : Circular (Form A)
Web-equipment and 6.6 mm eyelets, rim painted
with or without washers
Razors, safety
Stainless steel safety razor blades
Fastener, file, flexible-prong type
Fastener,file, loose-leaf, ring type
Fasteners for consumer goods-synthetic hook and
loop tape, specification
Manipulating industrial robots - Performance criteria
related test methods
Manipulating industrial robotics - Coordinate
systems and_motions
Denominations and definitions of weights of road
vehicles
Terms and definitions relating to dimensions of road
vehicles
Terms and definitions of weights of mopeds
Terms and definitons of dimensions for mopeds
Control cable assembly for mopeds
Terms and definitions of weights of scooters and
motorcycles
Terms and definitions of dimensions of motorcycles
Terms and definitions of dimensions of scooters
Road vehicles - Collision - Terminology
Automotive vehicles - Identification Numbering
Systems - Recommendations
Automotive vehicles - Registration plate Requirements
Single cylinder fuel injection pumps
Two-stage, one litre diesel fuel filters - Specification
Pipe union bolt
Automotive vehicles - Retroreflective sheets and
tapes - Specification
Automotive vehicles - Types - Terminology Part 1
Three and four wheelers
Automotive vehicles - Telltale symbols and controls
on two wheeled and three wheeled vehicles
(superseding IS 9655, IS 9774, IS 10043 and IS
10479)
Automotive vehicles - Pillion hands holds for two
IS 3170 : Part 1
IS 3170 : Part 2
IS 3172
IS 3173
IS 3175
IS 3351
IS 6740
IS 6750
IS 7449 : Part 1
IS 7451 : Part 1
IS 7451 : Part 2
IS 7451 : Part 4
IS 7451 : Part 5
IS 7611
IS 7657 : Part 2
IS 7451 : Part 3
IS 7451 : Part 6
IS 7657 : Part 1
IS 8118
IS 8422 : Part 1
IS 8422 : Part 2
IS 8422 : Part 3
IS 8422 : Part 4
IS 8422 : Part 5
wheeled vehicles - Requirements
Internal combustion engines - Fuel injection systems
Part 1 Fuel injection nozzles
Internal combustion engines - Fuel injection systems
Part 2 Calibration nozzle delay pintle type
Internal combustion engines - Fuel injection
equipment - Single and double ended pipe unions
(Single and Double ended banjo) - Specification
High pressure connections for fuel injection
equipment for diesel engines
Sealing washers for pipe unions
Diesel fuel filters - Methods of test
Gudgeon pins for internal combustion engines
Cylinder liners for internal combustion engines
Glossary of terms for IC engines: Part 1 Fuel
injection equipment
Reciprocating internal combustion engines: Part 1
General definitions
Part 2 Definitions of location of an engine
Part 4 Designation of direction of rotation
Part 5 Designation of the cylinders
Internal combsion engines - Radiators Specification
Part 2 Gears for axial and coaxial starters
Part 3 Definitions of right hand and left hand single
bank engines
Part 6 Hand operated control devices - standard
direction of motion
Starter ring gears of internal combustion engines:
Part 1 Gears for inertia and solenoid pre-engaged
starter
Automotive vehicles - Opacity (smoke) of exhaust
gas frm In-service vehicles equipped with
compression ignition engines operating under free
acceleration-Methodof measurement (second
revision of IS 8118)
Piston rings for IC engines: Part 1 R-rings plain
compression rings from 30 up to 200 mm nominal
diameter - R-Rings
Part 2 Taper faced compression rings from 30 up to
200 mm nominal diameter - M-Rings
Part 3 Keystone rings from 82 up to 200 mm
nominal diameter T-Rings 15 degrees
Part 4 Napier oil scraper rings from 30 up to 200
mm nominal diameter N-Rings
Part 5 Stepped oil scraper rings from 30 up to 200
IS 8422 : Part 6
IS 8422 : Part 7
IS 8422 : Part 8
IS 8422 : Part 9
IS 10003
IS 10533
IS 11509 : Part 2
IS 8503
IS 9057
IS 9420 : Part 1
IS 9420 : Part 2
IS 9465
IS 10105
IS 10478
IS 11509 : Part 3
IS 11509 : Part 6
IS 11838
IS 12022
IS 12352
IS 12404
IS 12455
IS 12499
IS 12500
IS 12969
IS 12996
mm nominal diameter Z-Rings
Part 6 Slotted oil control rings from 50 up to 200
mm nominal diameter S-Rings
Part 7 Double bevelled slotted oil control rings from
50 up to 200 mm nominal diameter G-Rings
Part 8 Narrow land slotted oil control rings form 50
up to 200 mm nominal diameter D-Rings
Part 9 Terms and definitions
Compression ignition (diesel) engines for
automotive application
Valve guides for internal combustion engines
Part 2 Element by-pass characteristics
Technical supply conditions for aluminium alloy
pistons for internal combustion engines
Automotive vehicles - Exhaust emissions - Carbon
monoxide concentration at idling for in-service
vehicles equipped with spark ignition engines Method of measurement (second revision of IS
9057)
Feed pumps for diesel fuel injection equipment Part
1 External dimensions
Feed pumps for diesel fuel injection equipments:Part
2 Types of drive
Mounting dimensions for inline injection pump
assemblies for fuel injection equipment for multicylinder compression ignition engines
Fittings for cylinder pressure indicators for internal
combustion engines
Dimensions for tapers for shaft ends and hubs for
fuel injection pumps
Part 3 Resistance to high pressure drop and to
elevated temperature
Part 6 Hydraulic pulse fatigue strength
Recommendations for measurement of quality
characteristics of gudgeon pins
Methods of testing of quality characteristics for
piston rings
Fuel injection pumps mounting bolts
Coupling for driving fuel injection pumps
Performance requirements of aircooled spark
ignition automotive engines
Two stage, 0.5 litre diesel fuel filters
0.2 litre diesel fuel filters
Method of test for quality characteristics of valves
Radiator pressure caps - Specification
IS 13016
IS 13018
IS 13029
IS 13050
IS 13051
IS 13052
IS 13686
IS 13687
IS 13824
IS 14273
IS 14382
IS 14511
IS 14553
IS 14554
IS 14555
IS 3649
IS 9262
IS 10323
IS 10651
IS 14556
IS 10652
IS 10653
IS 11139
IS 12460
IS 12535 : Part 1
Radiator drain cock - Specification
Method of test for pressure charged engines
Setting ignition timings in spark ignition engines Code of practice
Valve seat inserts - Specification
Radiator fans - Specification
Cylinder liners - Quality characteristics
Internal combustion engines - Radiators - Method of
test
Internal combustion engines - Radiators - Heat
dissipation performance - Method of test
Internal combustion engines - Method of verification
of emission crankcase gases for vehicles powered
with four stroke spark ignition engines
Automotive vehicles - Gaseous pollutants from
vehicles equipped with compression ignition engines
- Method of measurement
Automotive vehicles - Speed limiter - Specification
for installed requirements
Fuel inectors - Hand lever testing apparatus Specification
Automotive vehicles - Apparatus for the
measurement of opacity (smoke) of exhaust gas
from vehicles equipped with compression ignition
engines - Specification
Automotive vehicles - Exhaust emissions Apparatus for the measurement of carbon monoxide
concentration from vehicles equipped with spark
ignition engines at idling - Specification
Automotive vehicles - Evaporative emission from
spark ignition engines - Method of test
Clutch facings for automotive transmission
Recommendations for gear positions for road
vehicle
Cranks and chain wheels for mopeds
Hub axle, front for mopeds
Automotive vehicles - Catalytic converter for SI
engines - Installed requirements
Pedal assembly for mopeds
Hub axle, rear for mopeds
Adjusters for control cables for mopeds
Transmission Systems - Manual control sequence in
automatic transmission - Recommendations
Automotive vehicles - Transmission systems Glossary - Part 1 General definitions
IS 12535 : Part 2
IS 12535 : Part 3
IS 12587
IS 12902
IS 12903
IS 12904
IS 12905
IS 12971
IS 12973
IS 12978
IS 2742 : Part 3
IS 10289
IS 10841
IS 13090
IS 2742 : Part 1
IS 2742 : Part 4
IS 9212
IS 11852 : Part 1
IS 11852 : Part 2
IS 11852 : Part 3
IS 11852 : Part 4
IS 11852 : Part 5
Automotive vehicles - Tranmission systems Glossary - Part 2 Universal joints and driveshafts
Automotive vehicles - Transmission systems Glossary - Part 3 Drive axles definition
Transmission systems - Gear arrangement Recommendations
Commercial vehicles and buses - Gearbox flanges Type A
Commercial vehicle and buses - gearbox flanges for
- Type S
Flywheel housings for reciprocating internal
combustion engines - Nominl dimensions and
tolerances
Commercial vehicles - couplings between power
take-off (PTO) and ancillary driven units
Road vehicles - commercial vehicles - clearance
envelope for power take-offs (PTO)
Commercial road vehicles - Side openings for truck
power take-offs (PTO)
Commercial vehicles and buses - cross-tooth
gearbox flanges - Type T
Automotive vehicles - Brake linings Part 3 Method
of test
Brake control levers for mopeds
Front brake control lever for scooters and
motorcycles
Automotive vehicles - Commercial vehicles - Clutch
housings - Dimensions
Automotive vehicles - Brake linings (Nonrubberised) Part 1 Specification
Automotive vehicles - Brake linings Part 4 Coefficient of friction - Method of test
Recommendations for pressure in brake linings of
road vehicles and brake efficiency
Recommendation for brakes and braking systems for
automotive vehicles Part 1 Terminology
Recommendation for brakes and braking systems for
automotive vehicles Part 2 General functions and
features
Recommendations for brakes and braking systems
for automotive vehicles:Part 3 Performance
requirements and evaluation
Recommendations for brakes and systems for
automotive vehicles Part 4 Compressed air and air
assisted brakes - special requirements
Recommendations for brakes and braking systems
IS 11852 : Part 6
IS 11852 : Part 7
IS 12105
IS 12831
IS 12851
IS 13249
IS 12884
IS 13207
IS 13224
IS 13225
IS 13363
IS 13453
IS 13492
IS 13493
IS 13494
IS 13603
IS 13604
IS 5423
IS 7065
IS 10063
IS 11029
IS 11939
for automotive vehicles Part 5 Compressed air and
air assisted brakes - Pressure test connections
Recommendations for brakes and braking systems
for automotive vehicles Part 6 Vacuum braking
system - Special requirements
Automotive vehicles - Recommendation for brakes
and braking systems - Part 7 Procedure for type
approval testing
Method of test for valves of automotive air brake
systems
Braking systems - Banjo bolt connections Dimensions
Hydraulic braking systems - Tubings - Performance
requirements
Rubber seals for disc brake cylinders - Performance
requiirements
Braking system - Rubber boots for wheel brake
cylinder - Performance requirements
Hydraulic braking systems - Wheel cylinder Performance requirements
Hydraulic braking systems - Master cylinder Performance requirements
Automotive vehicles - Hydraulic braking systems Rubber cups - Specification
Automotive vehicles - Air brake systems Performance requriements for drain valves
Automotive vehicles - Braking systems - Method of
test on brake dynamometer for two and three
wheelers
Automotive vehicles - Two wheelers - Method of
test for brake pedal strength requirements
Automotive vehicles - Two wheelers - Method of
evalation of brake lever strength requirements
Air brake systems - Performance requirements for
unloader valves
Automotive vehicles - Air brake systems Performance requirements for brake chambers
Automotive vehicles - Air brake systems Performance requirements for dual brake valves
Shock absorbers - Specification
Steering wheels
Dimensions of end fittings of rear shock absorbers
for scooters and motorcycles
Steering ball races for mopeds
Automotive vehicles - Steering control systems Method of measurement of impact
IS 12648
IS 13476
IS 14269
IS 4530
IS 4552 : Part 1
IS 4552 : Part 2
IS 8116
IS 8339
IS 8411
IS 9226
IS 9238
IS 9290
IS 10277
IS 10331
IS 10586
IS 11028
IS 11030
IS 11140
IS 11981
IS 12009
IS 12056
IS 13111
IS 13353
IS 13749
IS 14210
IS 14226
IS 13750
End mountings of shock absorbers - Dimensions and
tests
Automotive vehicles - Mechanical steering gear Method of test
Automotive vehicles - Integral power steering gear Method of test
General requirements for positioning and routing of
engine exhaust pipes in motor vehicles
Automotive vehicles - Portable jacks for
automobiles, Part 1 Mechnical jacks - Specification
Automotive vehicles - Portable jacks for
automobiles, Part 2 Hydraulic jacks - Specification
Moped spokes and nipples for spokes
Automotive vehicles - Reflex reflectors Specifiction
Foot tyre inflators for road vehicles
Recommendations for load distribution for
passenger cars
Lateral spacings for foot controls for passenger cars
Aircraft fuel servicing vehicles
Handle grips for mopeds
Fuel tap for mopeds
Handle grips for scooters and motorcycles
Handlebars for mopeds
Moped seat pillars
Foot rest assembly for mopeds
Recommendations for safety requirements for
reflecting surfaces of automotive vehicles
Automotive vehicles - Safety requirements for
sidedoors of passenger cars
Recommendations for safety requirements for fuel
tank assembly of automotive vehicles
Autmotive vehicles - Garage equipment - Terms and
definitions
Automotive vehicles - Garage equipments Technical parameters
Automotive vehicles - Determination of H point Method of test
Automotive vehicles - Rear view mirrors Specification
Automotive vehicles - Hood latch system - Method
of test
Automotive vehicle - Reference volume - Luggage
compartment of passenger cars - Method of
measurement
IS 13941
IS 13942
IS 13943
IS 13944
IS 14225
IS 14247
IS 14681
IS 9081
IS 9168
IS 9436
IS 9438
IS 9449 : Part 1
IS 9449 : Part 2
IS 9449 : Part 3
IS 9453
IS 10694 : Part 2
IS 10694 : Part 3
IS 10694 : Part 4
IS 10694 : Part 5
IS 10694 : Part 1
IS 10694 : Part 7
IS 10694 : Part 8
IS 10914 : Part 1
IS 10914 : Part 2
IS 10914 : Part 3
IS 10914 : Part 4
Automotive vehicles - Wheel fasteners and hub caps
- General requirements
Automotive vehicles - External projections Performance requirements
Automotive vehicles - Wheel guards for passenger
cars - Performance requirements
Automotive vehicles - Window retention and release
systems for buses - Safety requirements
Automotive vehicles - Locking systems and door
retention components - General requirements
Automotive vehicles - Exterior protection for
passenger car - Performance requirements
Automotive vehicles - Fuel tanks for two or three
wheelers
Automotive vehicles - Valves and valve accessories
for pneumatic tyres - Specification
All rubber flaps for pneumatic tyres for automobiles
Performance requirements and methods of test for
wheels for passenger cars
Performance requirements and methods of tests for
wheels/rims for trucks
Dimensions for tyre valve threads Part 1 Threads
5V1, 5V2, 6V1 and 8V1
Part 2 Threads 9V1, 10V2 and 12V1
Part 3 Threads 10V1, 15V1, 17V1 and 20V1
Valve caps for tyre tube valves for automotive
vehicles
Part 2 Passenger car rims
Part 3 Commercial vehicles rims
Part 4 Scooter and scooter derivative rims
Part 5 Moped, motorcycle and motorcycle derivative
rims
Automotive vehicles - Rims - General requirements
Part 1 Nomenclature designation marking and
measurement
Part 7 Industrial truck rims
Part 8 Earthmoving machines rims
Automotive vehicles - Pneumatic tyres - Part 1
Terms, definitions and nomenclature
Part 2 Truck, bus and light truck tyres - Diagonal ply
- Specification
Part 3 Passenger car tyres - Diagonal ply Specification
Part 4 Scooters and scooter derivatives - Diagonal
ply - Specification
IS 10914 : Part 5
IS 10939
IS 11031
IS 11157
IS 11178
IS 11542 : Part 1
IS 11542 : Part 2
IS 12098
IS 12151
IS 12750
IS 13098
IS 12441 : Part 1
IS 13154
IS 13196
IS 13243
IS 13444
IS 13530
IS 13531
IS 13532
IS 10278
IS 10399
IS 10407
IS 10881
Pneumatic tyres for automotive vehicles, Part 5
Method of test for diagonal and radial ply tyres
Designation system for tyre tube valves for
automotive vehicles
Recommendations for storage and handling of inner
tubes, tube valves and flaps for use with penumatic
tyres for automotive vehicles
Pneumatic tyres for mopeds - Diagonal ply Specification
Recommendations for storage and handling of
pneumatic tyres for automotive vehicles
Dimensions for tyre tube valve core chamber Part 1
Core chamber No. 1 (normal bore)
Dimensions for tyre tube valve core chamber Part 2
Core chamber No. 2 (large bore)
Rim wheels for pneumatic tyres for animal drawn
vehicles - Specification
Motorcycles tyres, diagonal ply - Specification
Method of test for light alloy wheels for motorcycles
and mopeds
Automotive vehicles - Tubes for pneumatic tyres Specification
Automotive vehicles - Pneumatic tyre - Passenger
car tyres, radial ply Part 1 Specification
Automoitve vehicles - Tyres for agricultural tractors,
implements and power tilters - Specification
Automotive vehicles - Light alloys wheel for
motorcycles - Specification
Automotive vehicles - Commercial vehicles Attachments on hubs for wheels - Dimensions
Animal drawn vehicles - Pneumatic tyres Specification
Automotive tyres - Retreading materials - Mould
cure - General requirements
Automotive tyres - Tread rubber - Mould cure
retreading - Specification
Automotive tyres - Cushion compound for
retreading - Mould cure - Specification
Automotive vehiles - Maximum speed of mopeds,
scooter and motorcycles - Method of measurement
Automotive vehicles - Noise by stationary vehicles Method of measurement
Automotive vehicles - Two wheelers Acceleration
peformance - Methods of measurement
Automotive vehicles - Mopeds, scooters and
motorcycles - Method of evaluation measurement of
IS 11739
IS 11825
IS 11827
IS 11839
IS 11849
IS 11850
IS 11851
IS 11865
IS 11877
IS 11921
IS 11948
IS 12222
IS 12695
IS 12793
IS 12832
IS 13389
IS 13390
IS 13506
IS 13507
IS 13988
IS 14283
IS 14346 : Part 1
IS 11086
fuel consumption
Method of recording dust ingress in automotive
vehicles
Method of weighment of automotive vehicles
Method of evaluation of calibration of speedometer
fitted on automotive vehicles
Method of splash proof testing of automotive
vehicles
Method of determination of Centre of Gravity of
automotive vehicles
Automotive vehicles - Odometer system - Method of
evaluation
Method of evaluation of acceleration of automotive
vehicles
Method of conducting water proofing test on
automotive vehicles
Method of evaluation of maximum speed of
automotive vehicles
Automotive vehicles - Method of evaluation of fuel
consumption
Automotive vehicles - Steering effort - Method of
evaluation
Method of measurement of turning circle of
automotive vehicle
Procedure for determining the position and the
height of Centre of Gravity for three wheeled
vehicles
Procedure for determining the position and height of
Centre of Gravity (CG) of two wheeled vehicles
Measurement of internal noise level for automotive
vehicles
Road vehicles - Passenger car - Moving barrier rear
collision test method
Road vehicles - Frontal fixed barrier collision test
method
Automtive vehicles - Method of test for articulation
Automotive vehicles - Self centering - Method of
test
Automotive vehicles - Measurement of starting
gradeability - Method of measurement
Automotive vehicles - Accelerator control systems General requirements
Automotive vehicles - Passenger cars verification of
drivers direct field of view (Part 1) Vehicle
positioning for static measurement
Speedometers and odometer systems for automotive
IS 12588
IS 1062
IS 14346 : Part 2
IS 14557
IS 14610
IS 14618
IS 13599
IS 13602
IS 13646
IS 1063
IS 1884
IS 2077
IS 2081
IS 2325
IS 2577
IS 2646
IS 3105
IS 4050
IS 4062
IS 4063
IS 4086
IS 4362
IS 3563
IS 3628
IS 4060
IS 4370
applications
General requirements for oil and air assisted
pressure gauges
Methods of test for sparking plugs
Automotive vehicles - Passenger cars verification of
drivers direct field of view (Part 2) Method of test
Automotive vehicles - Procedure for measurement
of cooling efficiency
Automotive vehicles - Fuel consumption on chassis
dynamometer - Method of measurement
Automotive vehicles - Air conditioning systems Thermal performance - Method of measurement
Automotive vehicles - Instruments systems Temperature gagues electrical type - Specification
Automotive vehicles - Instrument systems Temperature gauges mechanical types Specification
Automotive vehicles - Instruments system - Pressure
gauges electrical types - Specification
Automotive vehicles - M 14x1.25 Spark plugs with
flat seating and their cylinder
Automotive vehicles - Electric horns - Specification
Automotive vehicles - Electric relays - Specification
Automotive vehicles - Taper terminal cable
connectors for batteries - Specification for brass type
connectors
Ignition coils for battery-coil ignition systems for
automobiles
Cartridge fuse-links for automobiles
Generators (dynamos) for automobiles
General requirements for automobile lighting and
signalling devices
Methods of tests for horn switches for automobiles
Foot-operated headlight dip switches for
automobiles
Fuse box for automobiles
Methods of test for distributors
Number plate lighting devices for automobiles
Automotive vehicles - Headlights (replaceable lamp
type) - Specification
Sidelights, tail-lights, parking lights, stop lights and
direction indicators for automobile use
Automotive vehicles - Flashers for direction
indicators - Specification
Code of practice for the use of lighting and
IS 4373
IS 5545
IS 5546
IS 5977
IS 7471
IS 7528
IS 7827 : Part 1
IS 7827 : Part 2
IS 7827 : Part 3 :
Sec 1
IS 7827 : Part 3 :
Sec 2
IS 7953
IS 7998
IS 8415
IS 8925
IS 9432
IS 9433
IS 9500
IS 9264 : Part 1
IS 9521
IS 9961
IS 10250
IS 10256
IS 11098
IS 13135
IS 13226
IS 13313
IS 13437
IS 13460
IS 13461
signalling devices on cars and commercial vehicles
Hydraulically operated light switches for
automobiles
Fog lights for automobiles
Distribution caps and rotor arms for automobiles
Regulators for automobile dc generators (dynamos)
Recommendation for polarity of earth connections
and marking of electrical equipment for automobiles
Porcelain (moulded) fuse links for automobiles
Electrical wind screen wipers: Part 1 Wiper systems
Electrical wind screen wipers: Part 2 Wipers motors
Automotive vehicles - Electrical wind screen wipers
Part 3 Wiper arms and blades Sec 1 Wiper arms
Electrical wind screen wipers: Part 3 Wiper arms
and blades, Sec 2 Wiper blades
Horn rings for automobiles
Contact breakers for two wheelers, three wheelers
and stationary spark ignition engines
Mounting dimensions of head lights for automobiles
Alternators for automobiles
Ignition switches for automobiles
Piano key type switches for use in automobiles
360 degree rotatory emergency warning lights
Motor vehicle interior lighting: Part 1 General
requirements and recommendations
Push button type switches for automotive vehicles
Reversing lights for automobiles
Severities for environmental tests for automotive
electrical equipment
Code of practice for installation of stop, tail and turn
signal lights for automobiles
Automotive vehicles - Steering column mounted
combination switches
Automotive vehicles - Electronic flashers Specification
Automotive vehicles - Resistances in starter motor
circuits - Methods of measurement
Automotive vehicles - Electrical wiring - Colour
coding
Automotive vehicles - Recommendations for
voltages for electrical systems
Automotive vehicles - Electrical connections
between towing vehicles and trailers with 6 or 12 V
electrical equipment - Type 12 S (supplementary)
Automotive vehicles - Electrical connections
IS 13491
IS 13499
IS 2765
IS 7079
IS 6722
IS 6723
IS 13509
IS 13931 : Part 1
IS 13931 : Part 2
IS 14141
IS 14380
IS 14381
IS 6724
IS 6725
IS 6741
IS 6742
IS 6743
IS 7263
IS 7264
IS 7269
IS 7274
IS 7828
IS 7829
IS 7830
between towing vehicles and towed trailers with 6 or
12 V electrical equipment - Type 12 N (Normal)
Automotive vehicles - Electrical connections
between towing vehicles and towed vehicles with 24
V electrical equipment - Type 24 N (Normal)
Automotive vehicles - Electrical connections
between towing vehicles and trailers with 24 V
electrical equiipment - Type 24 S (Supplementary)
Radiator hose
Automotive vehicles - Hydraulic brake hose Specification
Dimensions for aircraft jacking pad
Recommendations for aircraft instrument dials and
pointers
Automotive vehicles - Towing vehicles - Mounting
of electrical connections on rear cross members
Automotive vehicles - Stoplight switches Part 1
Specification
Automotive vehicles - Stoplight switches Part 2
Methods of test
Automotive vehicles - Electrical windshield washing
system - Performance requirement
Automotive vehicles - Ignition coils for magneto
ignition systems - Specification
Automotive vehicles - Electrical circuits Recommended graphical symbols
Aircraft sealing wire
Aircraft lockwire
Numerals for aircraft instrument dials and numbers
plates
Shape, size and direction of operation of lever
controls on aircraft
Sizes and mounting dimensions of aircraft
instruments cases (rear mounting type)
Directions of operation of toggle switches on aircraft
Dimensions for aircraft pressure refuelling
connections
Numbering of aircraft engines, engine cylinders,
combustion chambers and direction of rotation of
engines and propellers
Referencing system of aircraft zones, access doors
and panels
Sizes of gravity filling orifices for aircraft
Marking of aircraft gas cylinders
Dimensions of aircraft sheet rails and pins
IS 7831
IS 7832
IS 8141
IS 7879 : Part 1
IS 7879 : Part 2
IS 7879 : Part 4
IS 7879 : Part 5
IS 7879 : Part 7
IS 7879 : Part 8
IS 8252 : Part 1
IS 8252 : Part 2
IS 8252 : Part 3
IS 8252 : Part 6
IS 8252 : Part 8
IS 8252 : Part 10
IS 8252 : Part 11
IS 8252 : Part 14
IS 8252 : Part 16
IS 9086
IS 9087
IS 9088
IS 8252 : Part 18
IS 8252 : Part 21
IS 9089
IS 9093
Dimensions for aircraft lubricating nipples
Dimensions for aircraft connections for ground
airconditioning
Tolerances for screw threads used in aeronautics
Glossary of aeronautical and astronautical terms Part
1 General
Glossary of aeronautical and astronautical terms Part
2 Motion of aircraft
Glossary of aeronautical and astronautical terms Part
4 Aerodynamics
Glossary of aeronautical and astronautical terms Part
5 Aerodynes (Heavier than aircraft)
Glossary of aeronautical and astronautical terms Part
7 Air traffic and ground control services
Glossary of aeronautical and astronautical terms,
Part 8 Power plant
Environmental tests for aircraft equipment Part 1
General
Environmental tests for aircraft equipment Part 2
Temperatures, pressure and humidity
Environmental tests for aircraft equipment Part 3
Humidity (24 hours cycle)
Environmental tests for aircraft equipment Part 6
Waterproofness
Environmental tests for aircraft equipment Part 8
Change of temperature
Environmental tests for aircraft equipment Part 10
Saltmist
Environmental tests for aircraft equipment Part 11
Differential pressure
Environmental tests for aircraft equipment Part 14
Mechanical vibration
Environmental tests for aircraft equipment Part 16
Shock
Universal head aluminium alloy rivets for aircraft
100 deg. countersunk aluminium alloy rivets for
aircraft
Universal head nickel alloy rivets for aircraft
Environmental test for aircraft equipment, Part 18
Magnetic influence
Environmental test for aircraft equipment, Part 21
Explosion proofness
Aircraft - Aluminium and wrough aluminium alloy
rivets - General requirements
100 deg. countersunk nickel alloy rivets for aircraft
IS 9204
IS 9624
IS 9671
IS 10041
IS 10610
IS 10628
IS 10682
IS 10965
IS 10966
IS 10980 : Part 1
IS 10980 : Part 2
IS 10992 : Part 1
IS 10992 : Part 2
IS 11642 : Part 2
IS 11644
IS 11680
IS 10992 : Part 3
IS 11642 : Part 1
IS 11649 : Part 1
IS 11649 : Part 2
IS 11715
IS 11887
IS 11903
IS 13153
IS 13283
IS 7854
IS 7855
Marking of servicing, maintenance, ground handling
and safety hazard points on aircraft
Design criteria for aircraft passenger seats and berths
Specification for frequency weighting for the
measurement for aircraft noise (D-weighting)
Glossary of terms for airlines technical operation
Aircraft pressure cabin ground test condections
General requirements for aerospace bolts and nuts
Aircraft safety belts, lap type
Valves for aircraft tyres tubes
Dimensions of valve stem of aircraft tube valves
Specificaation for aircraft bolts and nuts (MJ
threads) Part 1 Basic profile
Specification for aircraft bolts and nuts (MJ threads)
Part 2 Dimensions for bolts and nuts
High speed tubeless tyres for civil aircrafts Part 1
Design
High speed tubeless tyres for civil aircrafts Part 2
Performance requirements
Aluminium hexagonal honeycomb core, Part 2
Method of test
Aerospace bolts and screws - Tolerances of form
and position
Hexagonal slotted (castellated) nuts (MJ series)
High speed tubeless tyres for civil aircrafts Part 3
Qualification test
Aluminium hexagonal honeycomb core Part 1
General requirements
Aluminium honeycomb sandwich panel for civil
aircraft floors Part 1 General design criteria
Aluminium honeycomb sandwich panel for civil
aircraft floors, Part 2 Methods of test
Rolled threads for aerospace fasteners
Cores for aircraft tyre tube valves
Caps for aircraft tyre tube valves
Aerospace plain - Hexagon nuts (MJ Series) Strength classification 1100 MPa - Maximum
operating temperature 235 Deg C - Specification
Aerospace _ Self locking, Hexagon nuts (MJ Sereis)
Stregnth classificaion 1100 MPa - Maximum
operating temperture 425 Deg C - Specification
Voltages and frequency for aircraft electrical
systems
Form of declaration of performance of aircraft
electrical equipment
IS 7856
IS 7857
IS 7915
IS 8705
IS 8706
IS 8946
IS 8980
IS 9156
IS 8834
IS 8852
IS 8981
IS 9174
IS 9196
IS 10237
IS 10240
IS 10241 : Part 1
IS 10241 : Part 2
IS 10241 : Part 3
IS 12043 : Part 1
IS 12043 : Part 2
IS 12044
IS 13269
IS 13296
IS 13309
IS 13932
Safety features for ground power units for direct
current aircraft servicing and engine starting
Aircraft fuel nozzle grounding plugs and sockets
Dimensions for connections for aircraft ground
electrical supplies
Static invertor for aircraft
Safety features for alternating current ground power
units for aircraft servicing
General requirements for rotating electrical
machinery for aircraft
General purpose push-pull single-pole circuit
breakers for aircraft
DC generators for aircraft
Dimensions for general purpose push-pull three-pole
circuit breakers for aircraft
Dimensions for general purpose push-pull singlepole circuit breakers for aircraft
Extra low voltage and low voltage spring return non
latch switches for aircraft
Dimensions for single pole mounted lever operated
switches for aircraft
Rotary and linear actuators (AC and DC) for aircraft
DC motors for aircraft
General requirements for electrical equipment for
aircraft
Electrical cables for aircraft: Part 1 General
requirements and tests
Electrical cables for aircraft: Part 2 Pren type
electric cables
Electrical cables for aircraft: Part 3 Nyvin type
electric cables
Electrical plug and socket connectors for aircrafts:
Part 1 General requirements
Electrical plug and socket connectors for aircraft:
Part 2 Tests
Mechanically operated switches for use in aircraft
Aircraft - Single hole and triple hole mounting
(Class 3) Lever operated manual switches Dimensions
Aircraft - Performance requirements for lever
operated manual switches (Class 3) - Specification
Aircraft - Performance requirements for lever
operated manual switches (Class 1 and 2) Specification
Aircraft electrical cables identification markings
IS 14547
IS 14548
IS 13835
IS 532
IS 623
IS 624
IS 625
IS 626
IS 628
IS 629
IS 630
IS 960
IS 1131
IS 1132
IS 1133
IS 1134
IS 1281
IS 1282
IS 1283
IS 2061
IS 2414
IS 2415
IS 2973
IS 3404
IS 3798
IS 4916
IS 5079
IS 6218
IS 7699
IS 9225
IS 10613
IS 10616
IS 11685
IS 11734
IS 11735
IS 11736
IS 12205
IS 12474
IS 14363
IS 3267
IS 3269
IS 3270
IS 3271
Aircraft - Electrical cables and cable harnesses Terminology
Aircraft - Standby magnetic compass - Specification
Aircraft - Connectors for ground electrical suppliesdesign, performance and test requirements
Bicycle tube valves
Bicycle frames - Specification
Bicycles - Rims - Specification
Bicycle handle bars - Specification
Bicycle seat pillars
Bicycles - Pedal assembly - Specification
Bicycle hub assembly R-Type
Bicycle spokes (plain) and nipple for spokes
Bicycle rim tapes and buckles
Bicycle bottom bracket axle (PH type)
Bicycle bottom bracket adjustable ball cup (PH type)
Bicycle bottom bracket fixed ball cup (PH type)
Bicycle bottom bracket lock ring (PH type)
Bicycle cranks and chain wheels
Bicycle cotter pins, washers and nuts
Bicycle freewheels and chains
Bicycle - Front forks - Specification
Cycle and rickshaw pneumatic tyres - Specification
Cycle rubber tubes - Specification
Bicycle steering head assembly (PH type)
Ladies bicycle frames
Glossary of terms used in the bicycle industry
Methods of test for bicycle saddles
Rubber valve tubing for cycle tube valves
Bicycle mudguards
Reflex reflectors for cycles
Bicycle air pumps
Specification for bicycles
Methods of tests for bicycles and sub-assemblies
Bicycle bottom bracket axle (R Type)
Bicycle bottom bracket adjustable ball cup (R type)
Bicycle bottom bracket fixed ball cup (R type)
Bicycle bottom bracket lock ring (R type)
Bicycle hub assembly (PH type)
Bicycle steering head assembly (R type)
Bicycle - Carrier - Specification
General Requirements of anchors
Stock anchors (for ship's use)
Stock and single fluke stock anchors (harbour use)
General requirements for steel cowl ventilators with
IS 3272
IS 3273
IS 3274
IS 3275
IS 3276
IS 3278
IS 3279
IS 3280
IS 3281
IS 3733
IS 3940
IS 3941
IS 3282
IS 3283
IS 3942
IS 3943
IS 4010
IS 4374
IS 4383
IS 4478
IS 4484
IS 4692
IS 4693
IS 4881
IS 5118
IS 5220
IS 5221
IS 5240
IS 5474 : Part 1
detachable components
Dimensions for oval-head steel cowl ventilators
Dimensions for circular-head steel cowl ventilators
Goose-neck ventilators - welded type
Dimensions for steel cowl ventilators accessories
Dimensions for steel cowl ventilators - mechanical
turning arrangements
Dimensions for detachable coaming covers and wire
mesh grids for steel cowl ventilators
General requirements for mushroom ventilators
Dimensions for mushroom ventilators with
adjustable head-welded type
Dimensions for mushroom ventilators with fixed
head-welded type
Conventional signs and symbols for ships'
ventilation systems
Ships' - Exhaust ventilators - specification
Cabin ventilators
Dimensions for mushroom ventilators with
adjustable head-cast iron type
Dimensions for mushroom ventilators with
adjustable head-cast iron type with provision for
passage of light
Marine sounding rods
Voice pipe and voice pipe fittings
Sounding pipes
Mild steel fabricated vertical bollards with and
without lugs
Pilot and embarkation ladders
Shipbuilding - Derrick rigs - Glossary of terms
Shipbuilding - Electrically welded stud link anchor
chains and connecting shackles and swivels Specification
Electrically welded studless link anchor chains and
connecting shackles
Steel accessories for marine piping
Code of practice for design of shipboard mechanical
ventilation trunking
Constructional details of ventilation trunking for
shipboard use
Forged horn cleats
Shipbuilding - Bearings for derric gosseneck
assemblies and components - Specification
Cast skew bollards
Shipbuidling - Round windows (side scuttles) Part 1
IS 5625
IS 1367 : Part 2
IS 5859
IS 5875
IS 5971
IS 5858 : Part 1
IS 5858 : Part 2
IS 5858 : Part 3
IS 5976
IS 6140
IS 6142
IS 6147
IS 6148
IS 6176
IS 6180
IS 6195
IS 6203
IS 6204
IS 6225
IS 6277
IS 6636
IS 6640
IS 6645
IS 6691
IS 6737
IS 7248
IS 7304 : Part 2
IS 8172
IS 8214 : Part 4
IS 8434
IS 7304 : Part 3
General requirements
Cast cruciform bollards
Technical supply conditions for threaded steel
fasteners Part 1 Technical supply conditions for
threaded steel fasteners Part 2 Product Grades and
tolerances
Tools for handling of anchor chains and attachments
Open deck scuppers
Cylindrical strum boxes
Accessories to mechanical ventilation system on
board ships, Part 1 Non-return valves
Accessories to mechanical ventilation system on
board ships, Part 2 Smoke protecting flaps
Accessories to mechcanical ventilation system on
board ships, Part 3 Control dampers
Ships' punkah louvres
Ships' snatch blocks
Ships' single sheave blocks with becket
Supporting straps used with ships' blocks
Head fittings and round nuts used with ships' blocks
Steel ladders for ships' use
Toughened safety glasses for ships' round windows
Cast open chocks
Ships' eye plates -- Round
Cast open roller fairleads
Ships' eye plates - Oval
Cast mud box
Hood for air pipes of ships' piping systems
Toughened safety glasses for ships' (rectangular)
windows
Service name plates for marine valves and fittings
Cast closed fairleads
Conventional signs for use on general arrangement
and detail plans of ships
Cargo gear particulars book
Code for fabrication, installation and testing of salt
water piping system for shipboard use, Part 2 Nonferrous systems
Vertical steel ladders
Glossary of ships' hydrodynamic terms, Part 4 Sea
keeping
Airconditioning requirements on boardships
Code for fabrication, installation and testing of salt
water piping system for shipboard use, Part 3
Ferrous systems
IS 8214 : Part 1
IS 8214 : Part 3
IS 8214 : Part 5
IS 8214 : Part 6
IS 8450
IS 8649 : Part 1
IS 8712 : Part 2
IS 8712 : Part 3
IS 8712 : Part 4
IS 8712 : Part 5
IS 8712 : Part 6
IS 8712 : Part 7
IS 8809
IS 8886 : Part 3
IS 9421
IS 9422
IS 8712 : Part 8
IS 8886 : Part 1
IS 8886 : Part 2
IS 8886 : Part 4
IS 8886 : Part 5
IS 8886 : Part 6
Glossary of ships' hydrodynamic terms, Part 1 Basic
quantities
Glossary of ships' hydrodynamic terms, Part 3
Resistance and propulsion
Glossary of ships' hydrodynamic terms, Part 5
Manoeuvrability
Glossary of ships' hydrodynamic terms, Part 6
Strength and vibration
Ships' steel dog step ladders
Procedure for designing the airconditioning system
on board ships, Part 1 Heat load calculations
Guidelines for co-ordination of dimensions in
shipbuilding, Part 2 Glossary of terms
Guidelines for co-ordination of dimensions in
shipbuilding, Part 3 Co-ordination sizes for
components and assemblies
Guidelines for co-ordination of dimensions
shipbuilding, Part 4 Controlling dimensions
Guidelines for co-ordination of dimensions in
shipbuilding, Part 5 Co-ordinating spaces for
internal subdivision
Guidelines for co-ordination of dimensions in
shipbuilding, Part 6 Co-ordinating spaces for
furniture
Guidelines for co-ordination of dimensions in
shipbuilding, Part 7 Co-ordinating sizes for fixtures,
fittings and equipment
Shipbuilding - Gaskets for ships' windows
Ships' ordinary rectangular windows, Part 3
Positioning
Colours of indicator lights for shipboard use
Symbols for ships' bulbous bow and side thruster
Guidelines for co-ordination of dimensions in
shipbuilding, Part 8 Co-ordinating sizes for services
Ships' ordinary rectangular windows, Part 1 Types
and dimensions
Ships' ordinary rectangular windows, Part 2 General
requirements
Ships' ordinary rectangular windows, Part 4 Details
of position of lugs for hinges and swing bolts and
securing holes in the frame
Ships' ordinary rectangular windows, Part 5 Details
of frame, inward opening, side hinged, heavy type,
bolted windows
Ships' ordinary rectangular windows, Part 6 Details
of frame, inward opening, side hinged, light type,
IS 8886 : Part 7
IS 8886 : Part 9
IS 8886 : Part 10
IS 8886 : Part 11
IS 8886 : Part 12
IS 9423
IS 9448 : Part 1
IS 9796
IS 10548
IS 8886 : Part 13
IS 8886 : Part 15
IS 8886 : Part 16
IS 8886 : Part 17
IS 8886 : Part 18
IS 8886 : Part 19
IS 8886 : Part 20
IS 8886 : Part 22
IS 9126 : Part 1
bolted windows
Ships' ordinary rectangular windows, Part 7 Details
of frame, inward opening, side hinged, heavy and
light type, welded windows
Ships' ordinary rectangular windows, Part 9 Details
of frame, inward opening, top hinged, light type,
bolted windows
Ships' ordinary rectangular windows, Part 10 Details
of frame, inward opening, top hinged, heavy and
light type, welded windows
Ships' ordinary rectangular windows, Part 11 Details
of frame, non- opening, heavy type, bolted windows
Ships' ordinary rectangular windows, Part 12
Detaiils of frame, non-opening, light type, bolted
windows
Identification colours for schemes for ships'
ventilation systems
Marine guardrails, stanchions, Part 1 Guardrails for
ships
Non-weather tight steel doors
Plans for fire control and life saving equipment symbols
Ships' ordinary rectangular windows, Part 13 Details
of frame, non-opening, heavy type, welded windows
Ships' ordinary rectangular windows, Part 15 Details
of frame, outward-opening, side hinged, heavy type,
bolted windows
Ships' ordinary rectangular windows, Part 16 Details
of frame, outward-opening, side hinged, light type,
bolted windows
Ships' ordinary rectangular windows, Part 17 Details
of frame, outward-opening, side hinged, heavy and
light type, welded windows
Ships' ordinary rectangular windows, Part 18 Details
of glass holder, inward-opening, side hinged, heavy
and light type, bolted and welded windows
Ships' ordinary rectangular windows, Part 19 Details
of glass holder, outward-opening, side hinged, heavy
and light type, bolted and welded windows
Ships' ordinary rectangular windows, Part 20 Details
of glass holder, top hinged, heavy and light type,
bolted and welded windows
Ships' ordinary rectangular windows, Part 22 Details
of swing bolts and wing nuts
Tolerances for castings and finishing for ships'
screw propellers, Part 1 Propellers of diameters
IS 9126 : Part 2
IS 10558
IS 10924
IS 10943 : Part 1
IS 10943 : Part 2
IS 9126 : Part 3
IS 9448 : Part 2
IS 9448 : Part 3
IS 9734
IS 9752
IS 11218
IS 11323
IS 11335
IS 11914
IS 12693
IS 12712
IS 13121
IS 13161 : Part 2
IS 13161 : Part 3
IS 13161 : Part 4
IS 13161 : Part 5
IS 13915
IS 14140
IS 14336
IS 13161 : Part 6
between 0.8 and 2.5 metres
Tolerances for castings and finishing for ships'
screw propellers, Part 2 Propellers of diameters
graeater than 2.5 metres
Aluminium shore gang ways
Guidelines for selection of marine valves and cocks
Accomodation ladders, Part 1 Upto 7 m length
Accomodation ladders, Part 2 From 7 to 30 m length
Tolerances for castings and finishing for ships'
screw propellers, Part 3 Methods of measurement
Marine guardrails, stanchions, Part 2 Gates and
portable guardrails sections for shiips
Marine guardrails, stanchions, Part 3 Storm rails
(exterior)
Guidelines for tests and trials of ship board
airconditioning systems
Conventional signs for the installation of ships'
ventilation and pipeline systems
Marine valve hand wheels
Steel gate valves for use in marine pipe work system
Cast iron gate valves for use in marine pipe work
system
Glossary of terms for ships' windows
Shipbuilding - Positioning of ships' round windows Guidelines
Shipbuilding - Means of active control of ships'
manoeuvring - Glossary of terms
Shipbuilding - Over all evaluation of vibration in
ships - Guidelines
Shipbuilding - Noise levels on board ships, Part 2
Measurement
Shipbuilding - Noise levels on board ships - Part 3
Maximum noise levels - Code of practice
Shipbuilding - Noise levels on board ships Part 4
Noise exposure limits
Shipbuilding - Noise levels onboard ship part 5
Requirements for protection
Shipbuilding - Ships' steel weathertight doors Specification
Shipbuilding - Ships' fuel oil piping system - Code
of practice
Shipbuilding - Deck covering materials Specification
Shipbuidling - Noise levels on board ships Part 6
Guidelines for controlling noise exposure
IS 13290
IS 13431
IS 13594
IS 13633
IS 13930
IS 14317
IS 14335
IS 14337
IS 14393
IS 14607
IS 14608
IS 14660 : Part 1
IS 4659
IS 4690
IS 5269
IS 7046
IS 7048
IS 7363
IS 7595 : Part 2
IS 7595 : Part 3
IS 7595 : Part 5
IS 7595 : Part 6
IS 8013
IS 8373 : Part 1
IS 8509 : Part 1
Shipbuilding - Measurement and reporting of
shipboard vibration data - Code of practice
Shipbuilding - Design, fabrication, installation and
testing of ships' lubricating oil system - Code of
practice
Shipbuilding - Galley, Pantry and scullery
equipments - General requirements
Shipbuilding - Measurement and reporting of local
vibration data of ships, structures and equipment Code of practice
Shipbuilding - Ships' main engine fresh water
cooling system - Code of practice
Shipbuilding - Preformed rigid polyisoyanurate
foam thermal insulating materials - Specification
Shipbuidling - Mineral fibre marine board for
thermal insulation - Specification
Shipbuilding - Mineral fibre resin bonded slabs Specification
Shipbuilding - Derrick boom heel fittings - Main
dimensions
Shipbuilding - Pipework information transfer Guidelines
Shipbuilding - Ventilation and air-treatment of
galleys and pantries with cooking applinces
Shipbuilding - Filling connection for drinking water
tanks Part 1 Principle requirements
Wire rope reel for inland vessels
Mooring buoy shackles
Access hatches for inland vessels
Inland vessels - Harbour tugs - Guide for selection
Inland vessels - Small weathertight hatches Specification
Inland vessels - Test and trials for harbour tugs
General requirements for otter boards, Part 2
Rectangular horizontally curved otter boards
General requirements for otter boards, Part 3 Oval
otter boards
Fishing vessels - Otter boards Part 5 Vee type otter
boards
Fishing vessels - Otter boards Part 6 Guidelines for
selection
Performance requirements and testing of marine
diesel engines for fishing vessels
Specification for steel launches Part 1 Single hull
passenger ferry launches
Code of practice for tests and trials of dredgers, Part
IS 8820 : Part 1
IS 8821 : Part 1
IS 8821 : Part 2
IS 8821 : Part 3
IS 8950
IS 9496 : Part 1
IS 9860 : Part 1
IS 9871
IS 9882 : Part 1
IS 10199
IS 10227
IS 10526
IS 10527
IS 10529
IS 10530
IS 10854 : Part 1
IS 10854 : Part 2
IS 10854 : Part 3
IS 10854 : Part 4
IS 10854 : Part 5
IS 10854 : Part 6
IS 10855
IS 10858
IS 10862
IS 10868
IS 11253
IS 11294 : Part 1
IS 11339
IS 11341
IS 11474
1 Self-propelled trailing hopper suction dredgers
Towing hooks, Part 1 Scale of tractive efforts
Steering gear, Part 1 Values of torques
Steering gear, Part 2 Hand hydraulic steering gear
Inland vessels - steering gear Part 3 Method of shop
testing
Inland vessels - Harbour tugs - General reuirements
Fishing floats, Part 1 Aluminium alloy and glass
floats
Fishing hooks, Part 1 Barbed hooks
Inland vessels - Wooden hatch covers - Specification
Sealing rubber for covers of cargo hatches, Part 1
Dry cargo hatches
Acceptance tests and trials for fishing vessels
Fishing vessels - Trawl winches - Specification
Inland vessels - Fire fighting water system - Pressure
Pressure ranges for compressed air system for inland
vessels
Guidelines for estimation of engine power for small
mechanized fishing boats
Guidelines for selection of fish hold insulation
Cutter suction dredge components, Part 1 Cutter
Cutter suction dredge components, Part 2 Suction
pipe
Cutter suction dredge components, Part 3 Ladders
Cutter suction dredge components, Part 4 Spuds
Inland vessels - Cutter suction dredge components
Part 5 Cast spud point - General requirements
Inland vessels - Cutter suction dredge components
Part 6 Cast spud cylinder - General requirements
Bucket capacities for multi-bucket dredgers
Inland navigation - pilot craft - Identification,
painting and inscriptions
Inland navigation - pilot craft - Classification and
basic requirements
Data sheet for reverse/direct reduction gear box for
fishing vessels
Swing derricks
Side scuttles for vessels for inland navigation, Part 1
General requirements
Dimensions for couplings for oil and fuel reception
for inland vessels
Covers for deck openings for pumps for inland
vessels
General requirements of power-operated windlesses
IS 12133
IS 12134
IS 12963
IS 11693
IS 11694 : Part 1
IS 11694 : Part 2
IS 11694 : Part 3
IS 11823 : Part 1
IS 11823 : Part 2
IS 11823 : Part 3
IS 11823 : Part 4
IS 12115 : Part 1
IS 12115 : Part 2
IS 12115 : Part 3
IS 12993
IS 13804
IS 13848
IS 14171
IS 12115 : Part 4
IS 12267 : Part 1
IS 13004 : Part 1
IS 13004 : Part 2
and anchor capstans for inland vessels
Glossary of terms and definitions for dredgers
Classification for dredgers
Inland vessels - Dredgers for floaters - Specification
Specification for cable lifters for stud-link anchor
chains for inland vessels
Specification for single-lock automatic couplings for
push tows for inland navigation, Part 1 General
requirements
Specification for single-lock automatic couplings for
push tows for inland navigation, Part 2 Type A
couplings
Specification for single-lock automatic couplings for
push tows for inland navigation, Part 3 Type B
couplings
Specification for couplings for disposal of oily
mixture from inland vessels Part 1 Flange couplings
Specification for couplings for disposal of oily
mixture from inland vessels Part 2 Quick release
couplings
Specification for couplings for disposal of oily
mixture from inland vessels Part 3 Adapters
(Flange/End piece)
Specification for couplings for disposal of oily
mixture from inland vessels Part 4 Adapters
(Flange/Bush)
Specification for couplings for disposal of sewage
water from inland vessels Part 1 Flange couplings
Specification for couplings for disposal of sewage
water from inland vessels Part 2 Quick release
couplings
Specification for couplings for disposal of sewage
water from inland vessels Part 3 Adapters
(Flange/End piece)
Inland vessels - Hand-holes - Specifications
Inland vessels - Sheaves for dredgers - Dimensions
Inland vessels - Rubber Fenders - Specification
Inland vessels - Bellows for dredgers - Specification
Specification for couplings for disposal of sewage
water from inland vessels Part 4 Adapters
(Flange/Bush)
Guidelines for stability for inland and harbour
vessels, Part 1 Decked vessels
Inland vessels - Fairleads - Specifications, Part 1
Two-lip fairleads
Inland vessels - Fairleads - Specifications, Part 2
IS 14238
IS 14449
IS 14545
IS 14546
IS 14646
IS 3573
IS 3580
IS 3586
IS 3732
IS 3947
IS 3979
IS 4045
IS 4549
IS 4550
IS 4551
IS 4568
IS 4259
IS 4562
IS 4601 : Part 1
IS 4601 : Part 2
IS 4602
IS 5112
IS 5113
IS 5130
IS 5314
IS 5326
IS 5327
Roller fairleads
Inland vessels - Selection of rubber fenders for
berthing structure - Code of practice
Inland vessels - Draught scale - Specification
Inland vessels - Coupling winches for push tows main dimensions
Inland vessels - Measurements of noise emitted by
vessels on inland water-ways and harbours - Code of
practice
Inland vessels - Mooring buoy - Specification
Sea anchors for lifeboats and liferafts
General requirements for distress signals for
lifeboats and liferafts
Recommendations for lifeboat equipment
Rigid liferafts
Shipbuilding - Testing, installation and maintenance
of marine portable fire appliances - Code of practice
Shipbuilding - Testing of marine diesel engines for
main propulsion - Code of practice
General requirements for magnetic compasses and
binnacles, Class A for use in sea navigation
Lifeboat compass-liquid type
Recommendations for positioning of magnetic
compasses in ships
Lifeboat crutch
Lifeboat oars (wood)
Code of practice for erection and calibration of
direction finders (medium frequency) for marine use
Portable chemical fire extinguishers, foam type for
marine use - Specification
Navigation lights for large sea going power driven
vessels, Part 1 Positioning and screening of lights
Navigation lights for large sea going power driven
vessels, Part 2 Oil lanterns
General requirements and testing of lifeboats for less
than one hundred persons
General requirements and testing of AC cargo
winches (for shipboard use)
General requirements and testing of AC mooring
winches (for shipboard use)
Drums fitted to cargo and mooring winches
Graduated drinking vessels for lifeboats and liferafts
for sea going ships
Cork lifebuoys
Rigid bailers for lifeboats
IS 5376
IS 5385
IS 5386
IS 6675
IS 6685
IS 7411 : Part 1
IS 7411 : Part 2
IS 7723
IS 7937
IS 8114
IS 8150
IS 8173
IS 8638 : Part 13
IS 8994
IS 9067
IS 9464
IS 9837
IS 9852
IS 9966
IS 10007
IS 10492
IS 10746 : Part 1
IS 10746 : Part 2
IS 11125
IS 11160
IS 11608
IS 11641
IS 12156
IS 12264
Dioptric lenses for navigational lanterns
Lifeboat accessories
General purpose ships' davit
Cable lifters for windlasses
Life jackets
Ships' intermediate shafts (integral flange), Part 1
For port craft
Ships' intermediiate shafts (integral flange), Part 2
For sea going vessels
Ships' flag staff
Testing of windlasses - General requirements
Guidelines for machining dimensions of propeller
hubs with keyway
45-litre capacity chemical foam engine for marine
use
Propeller shafts with keyway of diameter 20 to 160
mm
Shipbuilding - Class A magnetic compasses,
binnacles and azimuth reading devices - Code for
testing and certification
General requirements and testing of accommodation
ladder winches
General requirements and testing of lifeboat winches
Horizontal centrifugal pumps for marine use
Code for testing of marine centrifugal oil purifiers
General requirements and testing of capstans
General requirements for magnetic compasses and
binnacles, Class B, for use in sea navigation
Lifeboats' steel blocks
General requirements and testing of anchor cable
stoppers
Shell and tube type marine heat exchangers, Part 1
Application standard
Shell and tube type marine heat exchangers, Part 2
General requirements
General requirements for plate heat exchangers for
marine use
Guidelines for tools and outfits for ships' machinery
Signalling whistle for life saving appliances for seagoing ships
General requirements and testing of marine
inflatable liferafts
General requirements and testing of anchor winches
for mobile off-shore unit
Signalling mirror for lifeboats and liferafts for sea-
IS 12268 : Part 5
IS 12719
IS 12266
IS 12268 : Part 1
IS 12268 : Part 2
IS 12268 : Part 3
IS 12268 : Part 4
IS 12794
IS 13632
IS 13708
IS 14270 : Part 1
IS 14270 : Part 2
IS 14270 : Part 3
IS 14270 : Part 4
IS 14270 : Part 5
IS 14270 : Part 8
IS 6763 : Part 1
IS 8903
IS 9905
IS 9942
IS 6763 : Part 2
IS 7774 : Part 1
IS 7774 : Part 2
IS 8007
going ships
Automatic steam traps for marine use, Part 5
Marking
Shipbuilding - Deck machinery - General
requirements
Specification for international shore connection for
use on board ship
Automatic steam traps for marine use, Part 1
Glossary of terms
Automatic steam traps for marine use, Part 2
Classification
Automatic steam traps for marine use, Part 3 Faceto-face dimensions
Automatic steam traps for marine use, Part 4
Performance test
Shipbuilding - Steam traps - Guidelines for selection
Shipbuilding - Marine gyro compasses Specification
Shipbuilding - Marine radar reflectors Specification
Shipbuuilding - Pyrotechnic distress signals for
ships, Part 1 General requirements
Shipbuilding - Pyrotechnic distress signals for ships,
Part 2 Red flare parachute signal
Shipbuilding - Pyrotechnic distress signals for ships,
Part 3 Red star rocket signal - Specification
Shipbuilding - Pyrotechnic distress signals for ships,
Part 4 White flare signal - Specification
Shipbuilding - Pyrotechnic distress signals for ships,
Part 5 White flare parachute signal - Specification
Shipbuilding - Pyrotechnic distress signals for ships,
Part 8 Orange smoke signal - Specification
Specification and testing of fifth wheel king pin, Part
1 Size 50
Specification for drawbars for trailers of up to 5
tonnes gross mass
Pneumatic couplings between tractors and trailers
T-sign plate for trailers
Specification and testing of fifth wheel king pin, Part
2 Size 90
Glossary of terms relating to transport tractors and
trailers: Part 1 Basic terms
Glossary of terms relating to transport tractors and
trailers: Part 2 Dimensions and weights
Dimensions of fifth wheel coupling between
transport tractors and semi/articulated trailers for
IS 8274
IS 8296
IS 8297
IS 8298
IS 8299
IS 8300
IS 8752
IS 9760
IS 9895
IS 10393
IS 10766
IS 12351
IS 12604
IS 10752
IS 10792
IS 12358
IS 12606
IS 12807
IS 13284
IS 13327
IS 13579
IS 234
IS 236
interchangeability
Drawbar eyes and forecarriage pins for connection
between trailers of up to 35 tonnes gross mass and
transport tractor
Towing jaw for use between trailers of up to 35
tonnes gross mass and transport tractor
Towing jaw for use between trailers of up to 16
tonnes gross mass and transport tractor
Towing jaw for use between trailers of up to 5
tonnes gross mass and transport tractor
Towing hook for use between trailers of up to 16
tonnes gross mass and transport tractor
Towing hook for use between trailers of up to 35
tonnes gross mass and transport tractor
Towing hook for use between trailers of up to 5
tonnes gross mass and transport tractor
Dimensions for coupling arrangement between
towing vehicle and trailer
Electrical connection between towing vehicles and
trailers - Test methods and requirements
Specification for electrical connector for tractor
trailer jumper cable
Mounting dimensions for fifth-wheel coupling
Specification for coupling ball for caravans and
light-trailers
Dimensions for mounting of mechanical coupling
devices on trucks
Dimensions and testing requirements of landing
gears for mounting on semi-trailers
Testing and acceptance criteria of pneumatic
coupling between tractors and trailers
Dimensions for contact type coupling for vacuum
and pressure braking systems on trailers and semitrailers
Transport tractors and trailers - static load on ball
couplings
Specification for drawbar eyes for mechanical
connections between towing vehicles and trailers
Automotive vehicles - Drawbar coupling and hinged
drawbar - Method of test for strength
Automotive vehicle - Anchorages for towing ropes
cables or bars - Specification
Transport trailers - Method of test
Methods for determination of linear density of
textile fibres (gravimetric method)
Cotton fibre maturity (by sodium hydroxide swelling
IS 570
IS 681
IS 684
IS 1315
IS 1348
IS 1377
IS 2364
IS 2899
IS 3674
IS 3689
IS 1611
IS 1670
IS 1671
IS 1966
IS 3442
IS 3919
IS 3920
IS 4681
IS 4871
IS 4902
IS 4910 : Part 2
IS 4910 : Part 4
method)
Methods for determination of universal count of jute
yarn
Methods for determination of universal count of
woollen and worsted yarn
Method for determination of nep count in cotton
Method for determination of linear density of yarn
spun on cotton system
Method for determination of kemp content of raw
wool
Methods for determination of mean fibre length of
wool
Glossary of textile terms - Woven fabrics
Method for determination of percentage of
medullated fibres in wool
Method for determination of micronaire value of
cotton fibres
Conversion factors and conversion tables for yarn
counts
Method for determination of cotton fibre immaturity
count-polarized-light method
Textiles - Yarn - Determination of breaking load and
elongation at break of single strand
Method for determination of yarn strength
parameters of yarn spun on cotton systems
Methods for determination of bursting strength and
bursting distention of fabrics - Diaphragm method
Method for determination of crimp and count of
yarn removed from fabrics
Methods for sampling of cotton fabrics for the
determination of physical characteristics
Methods for sampling of cotton yarn for the
determination of physical charateristics
Method for determination of recovery from creasing
of textile fabrics by measuring the angle of recovery
Method for determination of lint and trash content of
cotton by means of mechanical - pneumatic
machines
Method for determination of correct invoice weight
of all wool materials
Tyre yarns, cords and tyre cord warpsheets made
from man-made fibres - Method of test Part 2 Linear
density
Tyre yarns, cords and tyre cord warpsheets made
from man-made fibres - Method of test part 4 Dip
pick up
IS 4910 : Part 5
IS 4952
IS 6359
IS 6637
IS 6653
IS 4910 : Part 6
IS 4910 : Part 8
IS 4910 : Part 9
IS 4910 : Part 12
IS 5002
IS 6489
IS 6668
IS 6919
IS 7032 : Part 1
IS 7071 : Part 4
IS 7702
IS 7703 : Part 1
IS 8357
IS 10971
IS 11056
IS 7703 : Part 2
Tyre yarns, cords and tyre cord warpsheets made
from man-made fibres -Method of test Part 5 Heat
shrinkage and heat shrinkage force
Methods for sampling of cotton bales, slivers and
rovings
Method for conditioning of textiles
Methods for determination of moisture in wool
Methods for determination of staple length of greasy
wool
Tyre yarns, cords and tyre cord warpsheets made
from man-made fibres - Method of test Part 6 Wet
contraction and wet contractile force
Tyre yarns, cords and tyre cord warpsheets made
from man-made fibres - Method of test Part 8
Thickness
Methods of test for tyre yarns, cords and tyre cord
fabrics made from man-made fibres : Part 9
Sampling for tyre yarns, cords and tyre cord fabrics
made from rayon
Methods of test for tyre yarns, cords and tyre cord
fabrics made from man-made fibres : Part 12
Sampling for tyre yarns, cords and tyre cord fabrics
made from polyamide
Method for determination of sample size to estimate
the average quality of a lot or process
Textiles - Woven fabrics - Determination of tear
resistance by falling pendulum method
Methods for preparing test specimens from fabric
samples for physical tests
Method for determination of wool fibres diameter by
air-flow method
Physical methods of test for uncut Indian jute, Mesta
and Bimli - General
Methods of physical test for ropes and cordages Breaking load and elongation at break
Method for determination of thickness of woven and
knitted fabrics
Methods of test for continuous filament polyester
and polyamide flat yarn - Linear density
(Superseding IS 1226:1957)
Method for assessment of fabric drape
Method for determination of pilling resistance of
fabrics
Method for determination of air permeability of
fabrics
Methods of test for continuous filament polyester
IS 7703 : Part 3
IS 7703 : Part 4
IS 7703 : Part 5
IS 8387
IS 9030
IS 10014 : Part 1
IS 11191
IS 11192
IS 11265
IS 11350
IS 12673
IS 13035
IS 13260
IS 171
IS 181
IS 182
IS 293
IS 758
IS 863
IS 834
IS 1066
IS 1143
IS 1144
IS 1347
IS 1423
IS 1431
IS 1535
IS 1544
IS 1720
and polyamide flat yarn - Tenacity and elongation at
break (Superseding IS 1228:1957)
Methods of test for man-made fibre condinuous
filament flat yarn - Commercial mass (Superseding
IS 1229:1957)
Methods for test for continuous filament polyester
and polyamide flat yarn : Part 4 Sampling
Methods of test for continuous filament polyester
and polyamide flat yarn - Unevenness percentage
Method of test for wool fibre length (Barbe and
Hauteur) using a comb sorter
Method for determination of seam strength of jute
fabrics including their laminates
Methods of test for man-made staple fibres Determination of length
Methods for sampling of woollen fabrics
Methods for sampling of wool tops
Glossary of terms pertaining to defects in yarns
made from natural fibres
Methods for sampling of medulated raw wool
Textile fabrics - Methods for determination of
abrasion resistance
Textiles - Jute and jute based bags - Method for drop
test
Method of grading for appearance of cotton yarn
using photographic standards
Textiles - Ring spun grey cotton yarn for weaving Specification
Leopard cloth
Mazri
Code for seaworthy packaging of cotton yarn and
cloth
Handloom cotton gauze, absorbent, non-sterilized
Handloom cotton bandage cloth, non-sterilized
Textiles - Ring spun grey cotton yarn for hosiery Specification
revision)
Code for packaging of sewing threads
Cotton mosquito netting, square mesh
Cotton cellular shirting
Inland packaging of cotton cloth and yarn
Cotton gaberdine
Cotton mosquito netting, round mesh
Cotton lining cloth
Cotton calico
Cotton sewing threads
IS 1803
IS 2413
IS 2457
IS 2613
IS 3192
IS 3193
IS 3566
IS 3567
IS 4686
IS 5088
IS 5485
IS 6612
IS 7056
IS 7085
IS 7119
IS 7851
IS 7866
IS 9336
IS 9543
IS 10582
IS 10100
IS 11814
IS 12171
IS 13683
IS 13684
IS 13719
IS 14379
IS 14463
IS 14466
IS 271
IS 1943
IS 2566
IS 2580
IS 2818 : Part 4
IS 2818 : Part 5
Cotton embroidery threads
Cotton twine
Cotton umbrella cloth (water proofed)
Cotton drill (non-waterproofed) for umbrellas
Cotton calico for electric cables
Cotton yarn for braiding for electric cables
Viscose rayon cut staple (spun) yarn
Cotton yarn for covering conductors
Typewriter ribbon fabric
Cotton textiles for ammunition
Cotton yarn waste
Unteased white cotton waste
Cotton towelling and towels
Polyester blend shirting - Market varities
Cotton cloth for PAGRIS and PAGS
Wash and wear requirements of cotton fabrics
Textiles - Ring spun polyester blended grey yarn Specification
Cotton yarn for underground cables
Spun polyester sewing threads
Book binding cloth
Shrink-resistance (or preshrunk) requirements of
woven cotton fabrics
Polyester cotton blended saris
Cotton bales
Textiles - Ring spun grey cotton yarn, superior type
- Specification
Textiles - Rotor spun grey cotton yarn Specification
Textiles - Ring spun cotton regenerated cellulosic
fibre blended grey yarn - Specification
Textiles- Grading of Cotton
Textiles- Packaging of cotton yarn and cloth for
transportation in freight containers - Code
Woven fabrics - Description of defects - Vocabulary
Grading of white, Tossa and Daisee uncut Indian
Jute
Textiles- A-twill jute bags - Specification
Textiles - B-twill jute bags for packing foodgrains Specification
Textiles- Jute sacking bags for packing cement Specification
Indian hessian - Part 4 - 213 and 270 g/m2 at 14
percent contract regain
Indian hessian - Part 5 - 298 g/m2 at 16 percent
IS 2818 : Part 6
IS 2873
IS 2874
IS 2875
IS 3667
IS 3751
IS 3790
IS 3966
IS 4436
IS 4744
IS 4856
IS 5476
IS 7406 : Part 2
IS 8115
IS 8117
IS 8569
IS 9113
IS 9685
IS 9846
IS 10036 : Part 1
IS 11193
IS 11596
IS 12001
IS 12154
IS 12174
IS 12493
IS 12494
IS 12626
IS 13188
IS 14342
IS 11
IS 32
IS 13649
IS 673
IS 674
contract regain
Indian hessian - Part 6 - 245 g/m2 at 16 percent
contract regain
Textiles - Packaging of jute products in bales Specification
Textiles - Heavy cee jute bags - Specification
Textiles - Jute corn bags - Specification
Textiles - B-twill jute cloth - Specification
Textiles - Heavy cee jute cloth - Specification
Textiles - Hessian bags - Specification
DW-Flour jute cloth
Jute bagging for wrapping cotton bales
Textiles - Packaging of jute products in rolls Specification
New jute woolpack
Glossary of term relating to jute
Jute bags for packing fertilizers - Laminated bags
manufactured from 380 g/sq.m;68 x 39 tarpaulin
fabric
Double hessian jute bags for pesticides
D.W. Tarpaulin laminated jute bags for pesticides
Jute fabrics used in the packing of textile products
Textiles - Jute sacking - General requirements
Sand bags, unproofed and cuprammonium proofed
Grading of Uncut Indian Mesta
Jute canvas - General requirements
Jute canvas postal bags
Grading of uncut Indian Bimli
Jute Sacking cloth for cement bag
Light weight jute bags for packing cement
Jute synthetic union bags for packing cement
Specification for jute bags for packing sugar
Specification for jute bags for packing urea
Specification for laminated jute bags for packing
milk powder
Textiles - Jute yarn used as filler in woven carpets Specification
Textiles - Jute yarn/twine - Packaging code
Grading of wool for export
Code for seaworthy packaging of woollen and
worsted yarn and cloth
Textile - Polyethylene lined jute bags for packing tea
- Specification
Cloth, Woollen, twill, dyed
Flannel, hospital, grey
IS 675
IS 677
IS 679
IS 680
IS 1530
IS 1531
IS 1721
IS 1793
IS 2156
IS 2319
IS 5910
IS 5911
IS 7026
IS 7033
IS 7747
IS 8331
IS 8689
IS 9393
IS 10921
IS 10930
IS 11206
IS 12131
IS 12132
IS 12811
IS 12812
IS 12838
IS 12839
IS 12848
IS 13904
IS 14291
IS 14292
IS 9
IS 199
IS 244
Bunting, worsted
Cloth, drab-mixture, woollen, water-resistant
Textiles - Great coat cloth - Specification
Textiles - Cloth, barathea - Specification
Baize cloth
Textiles - Blanketing cloth - Specification
Hair belting yarn
Guide for marking textile materials made of wool
Code for packing raw wool for export
Specification for serge
Fineness grades of wool
Fineness grades of wool tops
Hosiery yarn, worsted
Commercial moisture regain value for wool and its
products
Textiles - Hand-knitting wool yarn, worsted Specification
Textiles - Angola shirting - Specification
Worsted gaberdine, khaki drab
Code of manufacturing worsted, semi-worsted and
woollen yarns and tolerances
Carpet yarn made from virgin wool
Quality grades of undyed medullated wool
Glossary of textile terms-wool and other animal
fibres, their processing and products
All wool worsted suitings
Polyester wool blended worsted suitings
Worsted lohis - Specification
Worsted shawls - Specification
Blazer cloth - Specification
Wool/polyamide blended flannel, hospital grey Specification
Wool/polypropylene blended blankets Specification
Textiles - Serge, drab, polyester-wool blended Specification
Textiles - Shoddy woollen yarn-specification
Textiles - Shoddy woollen barrack blanketsSpecification
Method for determination of dimensional changes of
woven fabrics on washing near the boiling point
Textiles- Estimation of moisture, total size or finish,
ash and fatty matter in grey and finished cotton
textile materials
Method for determination of viscosity (or fluidity) of
IS 390
IS 391
IS 392
IS 647
IS 665
IS 686
IS 768
IS 769
IS 1349
IS 2349
IS 687
IS 688
IS 689
IS 762
IS 763
IS 764
IS 765
IS 766
IS 767
IS 967
IS 971
IS 972
IS 973
solutions of cotton and regenerated cellulosic manmade fibres in cuprammonium hydroxide
Method for determining the water repellency of
fabrics by water spray test
Method for determining resistance to penetration by
water of fabrics by hydrostatic head test
Textiles - Determination of water absorbption and
penetration of fabrics using Bundesmann type
apparatus
Methods for determining the desizing efficiency and
the relative efficiency of amylolytic enzymes
Textiles - Determination of dimensional changes of
fabrics containing wool on soaking in water
Method for determination of colour fastness of
textile materials to daylight
Method for evaluating change in colour
Method for evaluating staining
Methods for determination of wool fibre content of
raw wool
Method for determination of wettability of cotton
fabrics
Method for determination of colour fastness of
textile materials to washing: Test 1
Method for determination of colour fastness of
textile materials to organic solvents
Method for determination of colour fastness of
textile materials to hot pressing
Method for determination of colour fastness of
textile materials to hypochlorite bleaching
Method for determination of colour fastness of
textile materials to peroxide bleaching
Method for determination of colour fastness of
textile materials to washing: Test 3
Method for determination of colour fastness of
textile materials to washing: Test 4
Method for determination of colour fastness of
textile materials to rubbing
Method for determination of colour fastness of
textile materials to water
Method for determination of colour fastness of
textile materials to acid chlorination
Method for determination of colour fastness of
textile materials to perspiration
Method for determination of colour fastness of
textile materials to potting
Method for determination of colour fastness of
IS 975
IS 979
IS 2454
IS 3429
IS 3522 : Part 2
IS 980
IS 981
IS 987
IS 1039
IS 1299
IS 1313
IS 1316
IS 1383
IS 1386
IS 1389
IS 1390
IS 1560 : Part 1
IS 1560 : Part 2
IS 1623
IS 4202
IS 4203
IS 9603 : Part 2
textile materials to soda boiling
Methods for determination of colour fastness of
textile materials to sublimation
Method for determination of colour fastness of
textile materials to mercerizing
Methods for determination of colour fastness of
textile materials to
Method for determination of solubility of wool in
alkali
Textiles - Estimation of common preservatives - Part
2
Method for determination of colour fastness of
textile materials to stoving
Method for determination of colour fastness of
textile materials to acid milling
Methods for determination of colour fastness of
textile materials to bleaching with sodium chlorite
Textiles - Estimation of small quantities of copper,
iron, manganese, chromium and zinc
Method for determination of dimensional changes
on washing of fabrics woven from rayon and
synthetic fibres
Method for determination of dimensional changes
on washing of knitted goods containing wool
Methods for detection and estimation of damage in
cotton fabrics due to micro-organisms
Methods for determination of scouring loss in grey
and finished cotton textile materials
Methods for testing cotton cordages for resistance to
attack by micro-organisms
Methods for testing cotton fabrics for resistance to
attack by micro-organisms
Methods for determination of pH value of aqueous
extracts of textile materials
Method for estimation of carboxylic acid groups in
cellulosic textile materials - lodometric method
Method for estimation of carboxylic acid groups in
cellulosic textile materials -Sodium chloride sodium bicarbonate method
Textiles - Testing of jute fabrics for resistance to
attack by micro - organisms
Method for determination of chloride content of
textile materials
Method for determination of sulphate content in
textile materials
Glossary of terms pertaining to textile processing:
IS 1633
IS 1689
IS 1807
IS 1815
IS 1889 : Part 1
IS 1889 : Part 2
IS 1889 : Part 4
IS 1967
IS 2005
IS 2006
IS 2010
IS 2011
IS 2176
IS 9603 : Part 3
IS 10251
IS 11210
IS 11219
IS 2350
IS 2727
IS 2964
IS 3361
Part 2
Methods for testing jute cordages for resistance to
attack by micro-organisms
Method for determination of barium activity number
of cotton textile materials
Method for determination of colour fastness of
textile materials to formaldehyde
Methods for detection and estimation of damage in
cotton yarn and cordage due to micro-organisms
Method for quantitative chemical analysis of binary
mixtures of regenerated cellulose fibre and cotton Sodium zincate method
Method for quantitative chemical analysis of binary
mixtures of
Method for quantitative chemical analysis of binary
mixtures of
Methods for estimation of residual starch in cotton
fabrics after desizing
Methods for quantitative chemical analysis of
binaary mixtures of nylon or nylon 6.6 fibres and
certain other fibres
Method for quantitative chemical analysis of binary
mixtures of protein fibres with certain other nonprotein fibres
Methods for detection and estimation of damage in
jute fabric due to micro-organisms
Methods for detection and estimation of damage in
jute yarn and cordage due to micro-organisms
Textiles - Binary mixtures of cellulose acetate and
certain other fibres - Methods for quantitative
chemical analysis
Glossary of terms pertaining to textile processing:
Part 3
General principles of testing textiles for colour
fastness tests
Code of practice for stains removal from textiles and
clothing
Method for determination of scouring loss of rayon
filament yarn
Method for estimation of residual chlorine in cotton
textile materials
Method for quantitative chemical analysis of binary
mixtures of manila and sisal fibres
Methods for detection and estimation of damage in
cotton fibres due to micro-organisms
Method for determination of colour fastness of
IS 3421
IS 3425
IS 3426
IS 3430
IS 3456
IS 3522 : Part 1
IS 3522 : Part 3
IS 3856
IS 3857
IS 4389
IS 4390
IS 4655
IS 5463
IS 4419
IS 4420
IS 4635 : Part 2
IS 4635 : Part 3
IS 4636
IS 4637
IS 4802
IS 5152
textile materials to washing: Test 2
Textiles - Binary mixtures of acrylic, certain
modacrylics and certain other fibres - Methods for
quantitative chemical analysis
Method for determination of colour fastness of
textile materials to acid felting : Severe
Method for determination of colour fastness of
textile materials to rubbing with organic solvents
Method for determination of solubility of wool in
urea-bisulphite solution
Method for determination of water soluble matter of
textile materials
Methods for estimation of common preservatives on
textiles - Part 1
Methods for estimation of common preservatives
used in textiles
Method for testing flax fabrics for resistance to
attack by micro-organisms
Method for determination of colour fastness of
textile materials to acid felting: Mild
Method for determination of colour fastness of
textile materials to hot water
Method for determination of ether-soluble matter in
textile materials (Amalgamating IS 5152)
Method for determination of iron and chromium in
textiles
Methods for sampling of cotton fabrics for chemical
characteristics
Method for determination of dimensional stability of
knitted fabrics made of synthetic fibres
Methods for determination of conductivity of
acqeous and organic extracts of textile materials
Method for determination of colour fastness of
textile materials to vulcanizing -- With sulphur
monochloride
Method for determination of colour fastness of
textile materials to vulcanizing --With open steam
Method for determination of colour fastness of
textile materials to dry-heat treatments (excluding
pressing)
Method for determination of colour fastness of
textile materials to steam under pressure
Method for determination of colour fastness of
textile materials to dry-cleaning
Method for estimation of benzene-methyl alcoholsoluble matter in textile materials (To be
IS 5449
IS 6152
IS 6503
IS 6504
IS 7044
IS 7250
IS 7941
IS 8477
IS 7045
IS 7940
IS 8476
IS 9022
IS 9068
IS 9889
IS 10099
IS 11220
IS 11813
IS 11870
IS 11871
IS 11908
IS 11969
amalgamated with IS 4390)
Methods for determination of water soluble
chromates in textile materials
Methods for determination of colour fastness of
textile materials to weathering by xenon arc lamp
Method for quantitative chemical analysis of ternary
mixtures of protein fibres, nylon 6 or nylon 6.6 and
certain other fibres
Method for quantitative chemical analysis of ternary
mixtures of viscose rayon, cotton and protein fibres
Method for determination of sodium chlorite content
in textile materials
Method of test for evaluation of insectproofness of
woollen textiles
Method for determining the water repellency of
fabrics by cone test
Methods for determination of bitumen content in
laminated jute bags
Method for determination of hydrogen peroxide
content in textile materials
Method for determining resistance to penetration by
water of fabrics by static pressure head test
Method for determination of wool content in
woollen textile materials
Methods for preparation of laboratory test samples
and test specimens of textile materials for chemical
testing
Recommended methods for the removal of nonfibrous matter prior to quantitative analysis of fibre
mixtures
Method for quantitative chemical analysis of binary
mixtures of silk and wool or hair
Methods for preparation, marking and measuring of
fabric specimens and garments in tests for
determination of dimensional change
Method for determination of colour fastness of
disperse dyes on polyester fabric to carbonisation
Method for determination of soil resistance and soil
release efficiency of finished textile fabrics
Method for quantitative chemical analysis of binary
mixtures of polypropylene and polyethylene
Methods for determination of flammability and
flame resistance of textile fabrics
Method for determination of colour fastness of
textile fabrics to wet scrubbing
Method for determination of colour fastness of
IS 12646
IS 13501
IS 14579
IS 2194
IS 12135
IS 12170
IS 12467
IS 12722
IS 13025
IS 13036
IS 13042
IS 14446
IS 14563 : Part 1
IS 2136
IS 2195
IS 2427
IS 3862
IS 4439
IS 6239
IS 7867
IS 8429
IS 11873
IS 1605
IS 11881
IS 12637
textile floor-coverings to shampooing
Textiles - Colour fastness rating - specification
Textiles - Determination of flammability by oxygen
index
Textiles - Method for determination of absorbancy
of terry towels
Code for seaworthy packaging of man-made fibre
fabrics
Method for determination of acetic acid content of
acetate or triacetate fibres
Method for determination of dimensional stability of
textile materials to dry heat treatments
Method for determination of the ignitability of
upholstered composites for seating for furniture by
smokers' materials
Textile floor coverings - determinatin of flame
resistance by Tablet test
Method for determination of colour fastness of
textile materials to domestic and commercial
laundering
Apparatus for testing colour fastness of textile
materials to washing, laundering and dry-cleaning
Textiles - Determination of colour fastness to
perspiration - Apparatus
Textiles - Method of test for colour fastness to hot
water extraction cleaning of textile floor coverings
Textiles - Determination of formaldehyde Part 1
Free formaldehyde
Woven flat lining fabric for apparels - Specification
(Superseding IS 2228:1964 and IS 7392:1974)
Code for inland packaging of man-made fibre
fabrics and man-made fibre yarns
Grading of continuous filament viscose rayon yarn
and acetate yarn, bright and dull
Packaging of rayon staple fibres
Rayon velvet
Textiles-Generic names for man-made fibres
Continuous filament textile polyamide (nylon) yarn
Rayon satin lining cloth for berets - Specification
Woven nylon fabric for umbrellas, water resistant
Tapioca starch, cotton textile industry
Specification for men's and boys' woven shirting
made of man-made fibres and their blends
(Superseding IS 2225:1962 and IS 2273:1963)
Woven upholstery fabric plain, tufted or flocked
IS 13272
IS 13297
IS 13355
IS 13472
IS 2033
IS 5448
IS 10583
IS 11217
IS 11662
IS 11840
IS 13948
IS 13949
IS 1
IS 300
IS 745
IS 746
IS 748
IS 13950
IS 14565
IS 749
IS 750
IS 753
IS 755
IS 756
IS 757
IS 854
(Superseding IS 1455:1959 and IS 2424:1963)
Woven lace and knit curtain and drapery fabrics
made of man-made fibres and their blends Specification (Superseding IS 1502:1959 and IS
2135:1962)
Women's and girls' woven dress fabrics made of
man-made fibres and their blends - Specification
(Superseding IS 1452:1974, IS 1453:1974 and IS
2272:1963)
Saris made of man-made fibres and their blends Specification (Superseding IS 1425:1959, IS
1426:1959, IS 1427:1959, IS 1429:1959 and IS
2423:1963)
Textiles - Woven terry towelling fabrics and towels
made of man-made fibres and their blends Specification
Tapioca flour, cotton textile industry
Dextrins for textile industry (including British gum)
Sodium alginate for textile industry
Ultramarine blue for use in textile industry
Preservative treatments of textiles
Polyvinyl alcohol for textile industry
Textile auxiliaries - Urea-formaldehyde resin Specification
Textile auxiliaries-Dimethylol dihydroxy ethylene
urea (DMDHEU) reactant - Specification
The National flag of India (cotton khadi)
The national flag of India (silk khadi)
Handloom cotton bed sheets
Handloom cotton blankets, grey or coloured
Handloom cotton dhoties and saris (Amalgamating
IS 754:1974)
Textile auxiliaries - Dimethylol ethylene urea
(DMEU) reactant - Specification
Textile auxiliaries - Methods of tests for detection
and estimation of silicone emulsion
Handloom cotton dungri cloth
Handloom cotton lungies
Handloom cotton pugri cloth, bleached or dyed
Handloom cotton malmal
Handloom cotton dosuti and ded-suti, grey, scoured,
bleached or dyed
Handloom cotton lint, absorbent, bleached
Handloom cotton turkish, honeycomb and
huckaback towels and towelling cloth - Specification
IS 858
IS 862
IS 864
IS 889
IS 891
IS 893
IS 895
IS 896
IS 1094
IS 1095
IS 1097
IS 1099
IS 1100
IS 1101
IS 1102
IS 1241
IS 1242
IS 1243
IS 1244
IS 1245
IS 1246
IS 1247
IS 1265
IS 1266
IS 1267
IS 1450
IS 1451
IS 1579
IS 1814
IS 1937
IS 1939
IS 2157
IS 2158
IS 2159
(Amalgamating IS 855:1979 and IS 856:1971)
Handloom cotton table cloth and napkins
(Amalgamating IS 857:1956)
Handloom cotton ticking cloth
Handloom cotton light sheeting
Handloom worsted bunting cloth (amalgamating IS
890:1957)
Handloom worsted shirting
Handloom woollen blankets, plain or check
Handloom woollen blanketing cloth
Handloom woollen kamblies, loomstate
Handloom cotton gada cloth
Handloom cotton dress materials, bleached, dyed,
printed, striped or checked (superseding IS
861:1983, IS 1098:1957, IS 1240:1958 and IS
1556:1960)
Handloom cotton mosquito netting
Handloom cotton lining cloth, dyed - Specification
Handloom cotton crepe
Handloom cotton cellular shirting
Handloom buckram cloth
Handloom cotton calico, bleached or dyed
Handloom cotton shirting
Handloom cotton coating
Handloom cotton long cloth - Specification
Handloom cotton pyjama cloth, grey - Specification
Handloom cotton curtain cloth
Handloom cotton Madras check
Handloom woollen tweed
Handloom serge
Handloom worsted raffal shawls and lohis Specification (amalgamating IS 1268:1958)
Handloom cotton durries - Specification
(amalgamating IS1557:1972)
Handloom cotton drills
Handloom cotton twills
Handloom cotton mootus, striped or checked Specification
Handloom cotton bleeding Madras, loomstate
Handloom cotton handkerchiefs
Handloom shoddy woollen blankets (Superseding IS
2481:1963)
Handloom viscose staple fibre lungies Specification
Textiles - Handloom viscose staple fibre shirting
IS 2160
IS 2172
IS 2173
IS 2714
IS 2715
IS 3770
IS 3771
IS 3769
IS 3772
IS 3773
IS 3776
IS 3777
IS 3778
IS 3779
IS 3780
IS 3781
IS 3782
IS 3784
IS 4107
IS 4371
IS 4372
IS 4629
IS 6237
IS 7216
IS 8039
Textiles - Handloom viscose staple fibre coating Specification
Textiles - Handloom filament rayon saris Specification
Handloom melton (shoddy) cloth - Specification
Handloom pile fabric - Specification
Handloom woollen collar cloth, white Specification
Textiles - Dosuti,cotton khadi,bleaches or dyed Specification
Textiles - Long cloth,cotton khadi,bleached Specification
Textiles - Pugree cloth, cotton khadi,bleached or
dyed - Specification
Textiles - Mazri,cotton khadi,scoured - Specification
Textiles - Napkins and table cloth,cotton
khadi,bleached - Specification (Superseding IS
3774:1966)
Textiles - Bed sheets,cotton khadi,bleached Specification
Textiles - Dusters,cotton khadi,bleached Specification
Textiles - Dungri cloth,cotton khadi,bleached Specification
Textiles - Sheeting cloth,cotton khadi,bleached Specification
Textiles - Lining cloth,cotton cloth, dyed Specification
Textiles - Honey comb and huckaback towels,cotton
khadi,bleached or dyed - Specition (Amalgamating
IS 3775:1983)
Textiles- Sponge cloth,cotton khadi,grey Specification
Textiles - Cloth,cotton khadi,bleached,for general
purposes _ Specification
Textiles -Blanketing cloth, wool khadi Specification
Textiles- Kamblies,wool khadi,loomstateSpecification
Textiles-Cloth,twill,wool khadi,dyed-Specification
Textiles - Blankets, wool khadi - Specification
(Amalgamating IS 3783:1966)
Handloom cotton cloth for plaster of paris bandages
and cut bandages
Handloom cotton angavastram
Handloom cotton mix saris - Specification
IS 8797
IS 12388
IS 1321 : Part 1
IS 13717
IS 1321 : Part 2
IS 1410
IS 1804
IS 1857
IS 1887
IS 1920
IS 2453
IS 2819
IS 3252
IS 3256
IS 3262
IS 3871
IS 4145
IS 4572
IS 4575
IS 5175
IS 5176
IS 6587
IS 6590
IS 7082
IS 8674
IS 9536
IS 9560
IS 11057
IS 11058
IS 11199
IS 11521
IS 11927
IS 9936
IS 9944
IS 11066
IS 12733
IS 12734
IS 2518
Handloom cotton fabric for school uniforms
Handloom cotton voile
Sisal ropes - Specification Part 1 Untarred varieties
Textiles - Polyester cotton blended khadi
(polyvastra) suitings for uniforms - Specification
Sisal ropes - Tarred varieties
Coir ropes
Steel wire ropes - Fibre main cores- Specification
Tarred hemp marline, two-ply
Spun jute yarn
Hemp lines
Cable-laid cotton rope - Specification
Braided cotton cord
Shroud-laid cotton line
Code for inland packaging of ropes and cordages
Pilot lead line
Textiles - Fibre ropes and cordage-Glossary of terms
Code of practice for storage of ropes
Polyamide multifilament ropes (Hawser-laid and
plaited) - Specification
Code for handling of fibre ropes
Polypropylene ropes (3-strand hawser-laid and 8strand-plaited) - Specification
Hawser-laid hemp ropes
Spun hemp yarn
Braided nylon ropes for mountaineering purposes
Sisal lines
Polyethylene ropes - Specification
Polyamide cord - Specification
Colour code for identification of ropes and cordages
Industrial safety nets
Sisal agricultural twines
HDPE monofilament twine door nets
Cargo handling nets
Netting and fibre rope load restraint systems in
surface transport
Manila,nylon, polyester and polypropylene ropes for
marine purpose - Guide on equivalence
Natural and man-made fibre rope slings Recommendations on safe working loads
Polyester multifilament ropes -Specification (3Strand Hawser laid and 8-Strand plaited)
Polyamide double braided ropes - Specification
Polypropylene twine - Specification
Code for seaworthy packaging of wool hosiery yarn
IS 2522
IS 2523
IS 2783
IS 3086
IS 3100
IS 3325
IS 3326
IS 3329
IS 3353
IS 3530
IS 3555
IS 3596
IS 3604
IS 3617
IS 4044
IS 4053
IS 4375
IS 4376
IS 4582
IS 4046 : Part 1
IS 4046 : Part 2
IS 4809
IS 4965
IS 5084
IS 5085
IS 5450
IS 5524
IS 9469
IS 10590
IS 13003
IS 14320
IS 1718
IS 1740
and goods
Knitted worsted mufflers
Wool hose tops
Balaclava caps, wool, plain-knitted
Code for seaworthy packaging of cotton hosiery
yarn and goods
Men's wool-cotton short drawers
Code for inland packaging of cotton hosiery yarn
and goods
Cotton stockinette
Socks, cotton
Code for inland packaging of wool hosiery yarn and
goods
Gent's rib-knitted cotton stockings
Cotton singlets, white with blue welting
Glossary of terms relating to hosiery
Jerseys, round-neck, plain knitted, worsted
Textiles - Gent's pullover, knitted - Specification
Textiles - Gent's slipover, knitted - Specification
Knitted puttees, dyed
Cotton knitted sports shirts
Textiles- Gents' cotton short drawers (Trunks)Specification
Textiles - Women's cardigan, knitted - Specification
Gents' cotton rib-knitted briefs - Part 1 : 1 x 1, 2-ply
rib knitted
Textiles- Gents' cotton briefs - Specification Part 2:
Plain knitted
Cotton-knitted string vests
Textiles - Vests, cotton, interlock-knitted Specification
Nylon socks
Berets, wool, knitted
Gloves, wool, knitted
Men's wool-cotton underpants
Textiles - Fabric cotton, plain-knitted - Specification
(superseding IS 4964(Part 1:1975)
Code of practice for manual bleaching and
processing of cotton knitted fabric
Textiles - Fabric, cotton, interlock-knitted Specification
Textiles - Plain knitted, ladies' cotton panties Specification
Cotton spindle tape
Flat cotton wicks
IS 1895
IS 1923
IS 1974
IS 2847
IS 5351
IS 5352
IS 5354
IS 6117
IS 6487
IS 6488
IS 6672
IS 6673
IS 6674
IS 7426
IS 7427
IS 7776
IS 7777
IS 8302
IS 8894
IS 9675
IS 9686
IS 10056
IS 10057
IS 10415
IS 10692
IS 12111
IS 13597
IS 13598
IS 514
IS 1376
IS 1402
IS 2196
IS 2197
Cotton NEWAR
Cotton selvedge tape for electrical insulation
purposes
Cotton spindle tape for jute industry
Cotton selvedge tape for electric cables
Woven polyester tape for electrical purposes
Glass-fibre woven tape for electrical purposes
Textiles - Cotton stripping tape for electrical
purposes
Tapes, cotton
Cotton tape, unproofed and proofed for ammunition
purposes
Cotton webbing for personal web equipment
Mercerized cotton tapes for berets
Waxed cotton selvedge tape
Cotton webbing for use in packing aero-engines
Special cotton webbings
Cotton webbing for ammunition carriers and other
similar purposes
Silk webbing
Cotton webbing, rolled edges
Braided tape for berets
Cotton tapes for slide fastners
Woven cotton tapes, light, medium and heavy
qualities
Elastic tape
Silk (Viscose rayon) ribbon tape
Cotton tapes for wagon sealing
Textiles - Polyester fibre glass tapes - Specification
High density polyethylene webbing
Glossary of terms relating to narrow fabrics
Textiles - Polypropylene braided tapes for berets Specification
Textiles - High density polyethylene monofilament
NEWAR - Specification
Textiles - Mercerized cotton fabrics for covering
aircrafts and gliders - Specification (superseding IS
596, IS 598 and IS 1045)
Textiles - Cotton sewing threads for aerospace
purposes - Specification
Textiles - Braided cotton cord for aerospace
purposes - Specification
Linen sewing thread for aeronautical purposes
Braided (plaited) linen (flax) lacing cord for
aeronautical purposes
IS 2965
IS 2970
IS 3244
IS 3255
IS 3449
IS 3846
IS 4227
IS 4228
IS 4229
IS 4727
IS 5746 : Part 1
IS 5746 : Part 2
IS 5746 : Part 3
IS 6349
IS 6879
IS 6900
IS 8947
IS 9267
IS 10476
IS 11326
IS 11367
IS 11916
IS 14564
IS 698
IS 759
IS 699 : Part 1
IS 699 : Part 2
IS 1042
Breaking cord for cotton parachutes
Cotton fabrics for supply-dropping parachutes
Cotton webbing, statichute
Scoured or dyed cotton tapes for aerospace purposes
Cotton webbing for parachutes
Rot-proofed cotton tapes for aerospace purposes
Texties - Braided nylon cords for aerospace
purposes - Specification (Amalganmating IS 4437)
Nylon tapes for aerospace purposes
Textiles - Nylon sewing threads for aerospace
purposes - Specification
Nylon webbing for aeronautical purposes
Woven glass fibre fabrics for plastic laminates for
aerospace purposes Part 1 Loom-state fabric
Woven glass fibre fabrics for plastic laminates for
aerospace purposes Part 2 Desized fabric
Woven glass fibre fabrics for plastic laminates for
aerospace purposes Part 3 Finished fabrics for use in
polyester resin system
Tape, nylon, tubular, for aerospace applications
Fabric for target banner, radar responsive
Proofed nylon leno fabric
Material (nylon webbing) for aircraft safety belts
Tubular nylon webbing for aerospace purposes
Woven roving glass fabric for polyester glass
laminates for aerospace purposes
Nylon fabrics for coating with natural or synthetic
elastomers
Glossary of terms relating to textile materials for
aerospace purposes
Continuous filament textile glass yarn for aerospace
purposes
Textiles - Cotton tapes for personnel parachutes Specification
Picking sticks (arms) for overpick jute looms
Blanks for swells of jute looms
Textile machinery and accessories - Cross wound
spool centres for jute winding machines Specification Part 1 Spool centres for spool winding
machines
Textile machinery and accessories - Cross wound
spool centres for jute winding machines Specification Part 2 Spool centres for precision
winding machines
Boards for lay races of jute looms
IS 1043
IS 1186
IS 1190
IS 1225
IS 1552
IS 1555
IS 1619
IS 1737
IS 1739
IS 1794
IS 1896
IS 1903
IS 1906
IS 1938
IS 2058
IS 2487
IS 2531
IS 2910
IS 3022
IS 3166
IS 3199
IS 3368
IS 3496
IS 3627
IS 3683
IS 3789
IS 3825
IS 4416
IS 4417
IS 4462
IS 4465
IS 4470
IS 4888 : Part 1
IS 4888 : Part 2
IS 4888 : Part 3
Blanks for lay blocks for jute looms
Shuttles for hessian and Sacking looms
Textile Machinery - Healds twin wire for weaving Specification
Leather picking bands for looms
Pitch-bound wire reeds for jute looms
Textile Machinery - Reeds, pitch-bound for use in
cotton looms - Specification
Buffer band for cop-changing automatic looms
Spring buffers for cotton looms (Superseding
IS:1738-1960)
Cotton healds for use in cotton looms
Shuttles for plain calico looms
Picking sticks for overpick cotton looms
Recommendations on shape and dimensions of jute
loom pickers
Recommendations for shape and dimensions of 4-B
pickers
Cotton cambs for use in jute looms
Shuttles for pirn-changing automatic cotton looms
Flat steel healds (excluding jacquard and leno
weaving healds)
Crank shaft for cotton looms
Shuttles for jute broad looms
Metal reeds
Reed spaces for plain calico looms
Definition of side
Wooden heald frames for wire and flat steel healds
Dobby lags and pegs
Cloth rollers for plain cotton looms
Drop wires for warp stop motions
Bare cloth take-up rollers for plain cotton looms
Inset mail wire healds for jute weaving
Dobby barrels
Weft pirns for shuttles for pirn-changing automatic
cotton, woollen and worsted looms
Contact wire healds for jute weaving
Metal heald frames for flat steel healds
All metal leasing reeds for warping
Cones for yarn winding Part 1 Half angle of the cone
3 degrees 30'
Cones for yarn winding Part 2 Half angle of the cone
4 degrees 20'
Cones for yarn winding Part 3 Half angle of the cone
5 degrees 57'
IS 4888 : Part 4
IS 5141
IS 5492
IS 5944
IS 6254
IS 6268
IS 7043
IS 7075
IS 8137
IS 8138
IS 8139
IS 8545
IS 8546
IS 8547
IS 8567
IS 8568
IS 8684
IS 8875
IS 9244 : Part 1
IS 9244 : Part 2
IS 9280
IS 9794
IS 10310
IS 10347
IS 10626
IS 10795
IS 10936
IS 11510
IS 11529
IS 11819
IS 11933
IS 12318
IS 12339
Cones for yarn winding Part 4 Half angle of the cone
9 degrees 15'
Wooden cones for winding yarn
Pirns for woollen and worsted plain looms
Accessories for use in shuttles for jute looms
Side weft forks and grates for non-automatic looms
Accessories for use in shuttles for plain calico looms
Loom (fly) spindles
Cardboard tubes used as cores for jute fabric rolls
Springs for plain calico looms
Picking nose, boss and shell for looms
Picking cone and bolt for looms
Loom pickers
Requirements for leather or raw-hide exclusively
used in the manufacture of pickers
Recommendations on shape and dimensions of
single box picker for automatic looms
Textile machinery and accessories - Cone and
cheese winding machines - Vocabulary
Textile machinery and accessories - Pirn winding
machines - Vocabulary
Classification of terms for shuttles
Shedding tappets for plain calico looms
Code of practice for storage and use of textile mill
leather accessories - Pickers
Code of practice for storage and use of textile mill
leather accessories - Picking bands
Wooden shuttle blocks for non-automatic looms
Boards/blanks for sley bottom, race, cap and box
back of cotton looms (Superseding IS 2579, IS 2623,
IS 2624 and IS 2625)
Nomenclature for formers for yarn packages
Serrated bars for mechanical warp stop motions
Dimensions of heald carrying rods and `C' shaped
end loops of flat steel healds
Accessories for use in shuttles for pirn-changing
automatic cotton looms
Co-ordinated dimensions of heald frames in relation
to the pitch of the harness
Spindle for jute cop winding machine
Leather check straps for looms
Classification and vocabulary of knitting machines
4-B plastic pickers
Picking cone and picking stud for jute looms
Crank shaft for jute looms
IS 12385
IS 12414
IS 12910
IS 13563
IS 13681
IS 13747
IS 13748
IS 13865 : Part 1
IS 13865 : Part 2
IS 13866
IS 13879
IS 14192
IS 14456
IS 14457
IS 1927
IS 2510
IS 2699
IS 3056
IS 3078
IS 3176
IS 3189
IS 3625 : Part 1
IS 3625 : Part 2
IS 3625 : Part 3
IS 3625 : Part 4
Nominal diameters of circular knitting machines
Pitches of knitting machine needles
Textile Machinery - Reed - Guide for selection
Textile machinery and accessories - Numbering of
harnesses for drawing-in on jacquard machines
Textile machinery and accessories - Thread guides
for jute winding achines - Specification
Textile machinery - Hand-operated, single bed type,
domestic knitting machines - Specification
Textile machinery and accessories - Chain links for
warp knitting machines - Terms and definitions,
symbols
Textile machinery and accessories - Packages of
yarns and intermediate products - Part 1
Terminology
Textile machinery and accessories - Packages of
yarns and intermediate products - Part 2 Forms of
winding
Textile machinery and accessories - Winding - Basic
terms
Textile machinery and accessories - Numbering of
heald frames in a loom
Textile machinery - Knitting machines - Nameplate
information
Textile machinery - Flat bed knitting machines Vocabulary
Textile machinery - Knitting machines - Number of
needles for circular knitting machines of large
nominal diameter
Flat driving chains
Bottom rollers for drafting systems (Superseding IS
3077)
Flats and flats' screws
Lap rods
Rings for spinning and doubling frames
Top rollers for ring and speed frames
High speed bobbins for jute industry
Warp tubes for ring spinning and doubling spindles Specific requirements
Warp tubes for ring spinning and doubling spindles Recommended dimensions for tubes, taper 1:38
Warp tubes for ring spinning and doubling spindles Recommended dimensions for tubes, taper 1:64
Warp tubes for ring spinning and doubling spindles Recommended dimensions for tubes, taper 1:40
IS 3698
IS 3934
IS 4187
IS 4474
IS 4892
IS 4909
IS 5138
IS 5473
IS 6068
IS 6686
IS 6786
IS 7034
IS 7175
IS 7614
IS 8750
IS 7875 : Part 1
IS 7875 : Part 2
IS 7875 : Part 3
IS 7875 : Part 4
IS 7875 : Part 5
IS 8831
IS 8974
IS 8975
IS 9337 : Part 1
IS 9337 : Part 2
Textile Machinery - Spindle for ring frame, Rabbeth
type - Specification
Aluminium plug type spindles for spinning and
doubling frames
Skewers for use on cotton speed frames
Glossary of terms relating to drafting in spinning
machinery
Synthetic rubber aprons (reinforced) for drafting
systems
Card and gill pins for use in jute industry
Ear-shaped metal travellers for doubling frames
Double flanged bobbins used in woollen and
worsted mills
Textile machinery - Spinning machinery
(preparatory to doubling) - Nomenclature
Nose bars for speed and ring spinning frames
Card gauges
Wooden staves used for drum rollers of jute carding
machine
Cots for top rollers
Wooden bobbins for ring doubling and twisting
frames
Code of practice for packing of bottom rollers for
drafting systems
Sliver cans used in textile mills - General
requirements (Superseding IS 3049 and IS 3158)
Sliver cans used in textile mills - Vulcanized fibre
sliver cans (Superseding IS 3049 and IS 3158)
Sliver cans used in textile mills - Aluminium alloy
sliver cans (Superseding IS 3049 and IS 3158)
Sliver cans used in textile mills - High density
polyethylene sliver cans
Sliver cans used in textile mills - Sliver cans with
castors
Code of practice for maintenance of bottom rollers
for drafting systems
Aprons (combing leathers) for gill box used on
worsted machinery
Aprons (combing leathers) for french combs used on
worsted machinery
Bobbins and pirns used in textile mills - Wooden
flyer bobbins (Superseding IS 3833)
Bobbins and pirns used in textile mills - Wooden
warp bobbins for rabbeth spindles (Superseding IS
1724)
IS 9337 : Part 3
IS 9525
IS 9568 : Part 1
IS 9568 : Part 2
IS 9568 : Part 3
IS 10509
IS 11059
IS 11187
IS 11194
IS 11200
IS 11274
IS 11508
IS 11511
IS 11898
IS 11899
IS 12297
IS 12298
IS 12307
IS 12885
IS 12886
IS 12890
IS 13221
IS 13560
IS 13561
IS 13682
IS 13720
IS 13721
IS 697
IS 2882
IS 3184
IS 4392
IS 5641
Textile machinery and accessories - Bobbins and
pirns - Specification Part 3 Plastic flyer bobbins
Wires for flexible card clothings
Metallic card clothing - Terminology
Metallic card clothing - Bead wires
Metallic card clothing - Wires for cylinder, doffer
and licker-in (Superseding IS 3183)
Dead spindles used on jute spinning frames
Cylindrical tubes for open-end spinning
Spring bottoms for cylindrical sliver cans
Jockey pulleys used in ring spinning and doubling
frames
Terminology for open-end spinning
Roving bobbin holders
Faller bars for jute drawing frames
Bobbin carrier for jute spinning frames
Faller bar slides for jute drawing frames
Flyers for jute spinning frames
Delivery roller boss for jute drawing frames
Wooden card staves set with pins for cylindrical
drum rollers of jute carding machine
Delivery pressing roller boss for jute drawing frame
Pressing roller assembly for jute drawing frame
Heart cam for jute spinning frame
Bobbin rail for jute spinning frames
Textile machinery - Cams, faller screw for screw gill
jute drawing frame - Specification
Textile machinery and accessories - Drum pulleys
used in ring spinning and doubling frames Specification
Textile machinery and accessories - Ear-shaped
nylon travellers for ring doubling and ring twisting Specification
Textile machinery and accessories - Bobbin rail pin
and plate for jute spinning frame - Specification
Textile machinery and accessories - Pressing roller
assembly for jute spinning frame - Specification
Textile machinery and accessories - Bobbin rail boss
for jute spinning frame - Specification
Woollen druggets
Camel hair druggets
Kelim (woollen drugget)
Hand-made NAMDHAS
Textile floor covering - Hand-made wool carpets Specification
IS 13880
IS 13991
IS 5756
IS 5884
IS 10466
IS 11205
IS 14566
IS 3859
IS 4360
IS 4394
IS 4459
IS 4471
IS 4472 : Part 2
IS 4946
IS 5970
IS 6526
IS 7843
IS 11636
IS 11660
IS 7447
IS 7448
IS 7842
IS 7844
Textile machinery and accessories - Cotton spinning
machinery - Working width
Textile machinery and accessories-Cylindrical tubes
for draw twisters - Dimensions and permissible runout
Code for packaging of carpets
Textile floor covering - Tufted carpets Specification
Guide for care and maintenance of carpets
Classification and terminology of textile floor
coverings
Textile floor covering _ Hand-knotted silk carpets Specification
Method for determination of strength of water
soluble azo dyes by reduction with titanium
trichloride
Method for determination of strength of fast bases
Method for evaluating the strength of homogenous
vat dyestuffs
Method for determination of strength of direct
dyestuffs by dyeing test
Method for determination of strength of naphthols
(azoic coupling components) (gravimetric and
volumetric methods)
Methods for identification of application classes of
dyes on textile materials--Wool, silk and other
protein fibres
Method for evaluation of strength and shade of
naphthol
Method for estimation of strength (vat content) of
solubilized vat dyestuffs
Method for evaluation of strength and shade of fast
bases by dyeing test
Method for evaluating strength and shade of acid
dyes by dyeing test
Method for determination of strength of indigo in
substance
Method for quantitative estimation of cationic dyefixing agents
Method for evaluating strength of reactive dyes
(dichlorotriazinyl type) by dyeing test
Method for evaluating strength of reactive dyes
(monochlorotriazinyl type) by dyeing test
Method for evaluating strength of reactive dyes
(vinyl sulphone type) by dyeing test
Method for evaluating strength and shade of chrome
IS 7845
IS 10010
IS 11635
IS 11678
IS 12149
IS 12150
IS 12386
IS 12387
IS 12547
IS 13091
IS 13092
IS 13171
IS 13222
IS 13223
IS 14334
IS 13361
IS 13627
IS 14444
IS 14464
IS 4401
IS 4402
IS 4640
IS 4641
IS 4945 : Part 1
IS 5508 : Part 14
dyes by dyeing test
Method for evaluating strength of reactive dyes
(trichloropyrimidyl type) by dyeing test
Method for evaluation of strength and shade of
pigment dispersion by printing method
Method for determination of strength of disperse
dyes for polyester by screen printing
Method for determination of strength of indigo on
dyed textiles
Method for determination of strength of disperse
dyes for polyester by exhaust dyeing
Method for determination of strength of disperse
acetate dyes by exhaust dyeing
Specification for disperse yellow 3 for textile
industry
Methods for determination of strength of basic dyes
Specification for Vat Green 1 for textile industry
Textile Dyestuff - C.I. Reactive Black 5 Specification
Textile Dyestuffs - C.I. Reactive Red 2 Specification
Textile Dyestuffs - C.I. Disperse Blue 87 Specification
Textile Dyestuffs - C.I. Disperse Blue 94 Specification
Textile Dyestuffs - C.I. Flourescent Brightener 199 Specification
Textile dyestuffs - Determination of dusting
behaviour of dyes
Textile Dyestuffs - Identification of application
classes of dyestuffs in substance
Textile dyestuffs - Solubility of water-soluble dyes Determination
Textile dyestuffs - Method for determination of
relative colour strength of dyes in solution
Textile dyestuffs - Determination of solution
stability of reactive dyes in presence of electrolytes
Textiles-Twisted nylon fishnet twines
Fishing nets - Netting - Basic terms and definitions
Fishing nets - Designation of netting yarns in the tex
system
Fishing nets - Description and designation of knotted
netting
Cotton twines for fishnets - Twines for gill nets
Guide for fishing gear : Data sheet for 325-m purse
IS 5508 : Part 17
IS 5508 : Part 22
IS 5508 : Part 23
IS 5508 : Part 24
IS 5815 : Part 1
IS 5815 : Part 2
IS 6347
IS 6348
IS 6920
IS 7533
IS 5815 : Part 3
IS 5815 : Part 4
IS 5815 : Part 5
IS 5815 : Part 6
IS 5815 : Part 7
IS 5815 : Part 9
IS 8746
IS 9945
IS 14190
IS 14287
IS 4039
IS 6706
IS 6726
IS 7050
IS 7213
IS 7380
seine
Guide for fishing gear : Data sheet 35-m bulged
belly trawl net
Guide for fishing gear : Data sheet for troll line
Guide for fishing gear : Part 23 26.8 m two seam
trawl
Guide for fishing gear:Part 24 37.1 m butterfly trawl
nets.
Methods of test for fishing gear materials Part 1
Determination of thickness
Methods of test for fishing gear materials Part 2
Determination of linear density (mass per unit
length)
Polyethylene monofilament twines for fishing
Basic terms for hanging of netting
Fishing nets - Cutting knotted netting to shape
('Tapering')
Polyamide (nylon) monofilament line for fishing
Methods of test for fishing gear materials Part 3
Determination of twist
Fishing nets: Determination of breaking load and
knot breaking load of netting yarns
Fishing nets - Determination of mesh breaking of
netting
Netting yarns - Determination of change in length
after immersion in water
Fishing nets - Determination of elongation of netting
yarns
Finishing gear materials- Method of test Part 9
Determination of weathering resistance.
Fishing nets - Mounting and joining of netting Terms and illustrations
Fishing nets - Method for determination of taper
ratio and cutting rate
Combination wire ropes for fishing purposesSpecification
Textiles - Polypropylene multifilament netting
twines - Specification
Code for packaging of ready made garments for
export
Measurements for men's shirts
Interlinings for shirts
Measurements for men's manila shirts
Measurements for men's trousers
Men's shirts - General requirements
IS 7414
IS 10015 : Part 2
IS 10015 : Part 7
IS 10015 : Part 8
IS 10194
IS 10015 : Part 3
IS 10397
IS 10789
IS 11161
IS 11621
IS 11801
IS 12110
IS 12675
IS 14452
IS 14453
IS 14454
IS 14455
IS 14484
IS 7609
IS 7955
IS 8857
IS 8927 : Part 1
IS 8928
IS 9886
IS 11046
IS 11047
IS 11048
IS 11054
IS 11055
IS 11978
Men's trousers - General requirements
Size designation of clothes : Part 2 Men's and boys'
outer wear garments
Size designation of clothes :Part 7 Gloves
Size designation of clothes :Part 8 Headwear
Guide for positioning of labels in garments (To be
superseded)
Size designation of clothes : Part 3 Women's and
girls' outerwear garments
Guide for sizing systems for clothes
Classification and terminology of stitch types used
in seams
Textiles - Seam types - Classification and
terminology
Definitions and measurements of body dimensions
for garment construction and anthropometric survey
purposes
Outerwear garments - Women's and girls'
Glossary of terms used in apparel industry
Guide to garment quality
Textiles - Care labelling code using symbols
(Superseding IS 4418:1967)
Size designation of clothes - Definition and body
measurement procedure [Superseding IS 10015(Part
1):1981]
Size designation of clothes - Women's and girls'
underwear, nightwear, foundation garments and
shirts [Superseding IS 10015(Part 6):1983]
Size designation of clothes - Infants' outerwear
garments [Superseding IS 10015(Part 4):1982]
Size designation of clothes - Men's and boys'
underwear, nightwear and shirts [Superseding IS
10015(Part 5):1983]
General requirements for tents
Holdalls
Canvas water bucket
Haversacks : Part I For railway personnel
Chaguls
Mosquito nets
Towel, operating
Postal green cash bags
Postal red accounts bags
Nylon blue air mail bags
Cotton blue air mail bags
Waterproof delivery bag for postman
IS 12840
IS 12989
IS 12990
IS 12991
IS 13489
IS 14281
IS 14351
IS 14354
IS 7951
IS 8014
IS 8304
IS 9102 : Part 1
IS 9765
IS 10598
IS 11049
IS 11197
IS 11198
IS 12100
IS 11060
IS 13628
IS 13629
IS 6192
IS 6193
IS 6899
IS 7903
IS 8069
Kit bag, universal
Camping tents - Requirements and test methods Type N (Normal tents)(Amalgamating IS 12990)
Camping tents - Requirements and test methods Type L (Lightweight tents)(To be amalgamated with
IS 12989)
Camping tents - Nomenclature
Textiles - Bed mattress - Specification
Glossary of terms relating to made-up textile items
Textiles-Ground sheets (Light weight)-Specification
Textiles - Waterproof covers-Specification
Textile machinery and accessories - Beams for
dyeing slivers and yarn - Terminology and main
dimensions
Classification and nomenclature of dyeing and
finishing machinery
Wooden winding rollers for textile finishing
machines
Rubber blankets for shrinkage range Part 1
Requirements for rubber blankets
Terminology of stenters
Textile machinery - Guide rollers for dyeing and
finishing machinery - Specification
Vocabulary for ancillary devices for dyeing and
finishing machinery
Monoaxially oriented polypropylene tapes
Polypropylene (PP) woven sacks for packing
fertilizers
High density polyethylene (HDPE) woven sacks for
packing flour
Moulded rubberized coir cushioning
Textile machinery - Squeezing rollers for textile
finishing machines - Specification
Textile machinery - Stainless steel drying cylinders
used in textile processing - Specification
Textiles- Monoaxially oriented high density
polyethylene tapes-Specification
Methods of tests for monoaxially oriented high
density polyethylene tapes
Textiles - High density polyethylene (HDPE) woven
fabrics - Specification
Textiles-Tarpaulins made from high density
polyethylene woven fabric-Specification
High density polyethylene (HDPE) woven sacks for
packing pesticides [amalgamating IS 8069(Part
IS 10054
IS 11651
IS 11652
IS 11824
IS 14341
IS 14378
IS 11420 : Part 1
IS 1582
IS 1583
IS 1584
IS 12503 : Part 1
IS 14596
IS 1687
IS 2939
IS 2940
IS 8227 : Part 1
IS 8227 : Part 2
IS 8231
IS 8247
IS 8499
IS 8738
IS 2941
IS 2942
IS 2943
IS 2945
IS 2946
2):1981]
Textiles - High density polyethylene (HDPE)
monofilament mosquito netting, round mesh Specification
High density polyethylene (HDPE)/polypropylene
(PP) woven sacks coated with paper
Textiles - Woven sacks for packing cement - High
density polyethylene/ Polypropylene - Specification
Paper coated high density polyethylene woven sacks
for packing skim milk powder
Textiles - Paper laminated high density polyethylene
(HDPE)/polypropylene (PP) fabric for
wrapping/covering - Specification
Textiles - Paper laminated high density polyethylene
(HDPE)/ polypropylene (PP) bags for packing
cements - Specification
Coir mats - General requirements
Method for determination of scouring loss in silk
textile materials
Handloom silk dhotis, and printed saris Specification
Textiles - Silk shirting - Specification
Coir mattings, mourzouks and carpets - General
(superseding IS 2331, IS 2995 and IS 7275)
Coir Products - 2 ply coir yarns spun by manual
operation - Specification (Superseding IS 2295)
Textiles - Silk kora (loomstate) cloth - Specification
Raw silk - Methods for visual and tactual
examination
Raw silk - Determination of conditioned mass
Fasteners, arch and clip for files Part 1 Arch
fasteners
Fasteners, arch and clip for files Part 2 Clip fasteners
Clips, paper, spring type
Fasteners, paper, prong type, with washer
Tags for files
Parachute buckles, D-shaped
Raw silk - Methods for conducting winding test
Raw silk - Determination of size (count) deviation
and maximum deviation
Raw silk - Methods for determination of conditioned
size (count)
Textiles - Determination of cleanness of raw silk
Raw silk - Methods for determination of neatness
and low neatness
IS 2947
IS 2948
IS 3561
IS 1178
IS 1422
IS 4388
IS 4399
IS 5996
IS 7133
IS 7610 : Part 1
IS 7610 : Part 3
IS 7610 : Part 4
IS 7610 : Part 5
IS 8430
IS 8991
IS 8995
IS 9230
IS 9998
IS 10055
IS 11573
IS 11574
IS 11575
IS 11915
IS 11926
IS 11986
IS 12020 : Part 1
IS 12384
IS 12415
IS 12416
IS 12806
IS 12809
IS 13137
IS 13362
IS 13128 : Part 1
IS 13128 : Part 2
Raw silk - Determination of tenacity and elongation
by serigraph test
Raw silk - Determination of cohesion
Method for determination of dimensional changes
on washing of woven silk fabrics
Cotton filter cloth
Cotton duck
Cotton fabrics for reinforcement of rubber hoses
Nylon fabrics for industrial and special purposes
Cotton belting ducks
Cotton tyre cord and warp sheet for cycle and
rickshaw
Machinery fabrics, wool - General
Machinery fabrics, wool - Sizing flannel
(superseding IS 6055 : 1970)
Machinery fabrics, wool - Plaiding cloth
Machinery fabrics, wool - Lapping cloth
Nylon fabrics for inflatable equipment
Nylon fabrics for sleeping bags
Cotton cover fabrics for fan belts and V-belts
Cotton chafer fabrics
Cotton liner fabrics
Jute needle loom felts
Polyamide yarn for cycle and rickshaw tyres
Polyamide filter cloth
Polyester filter cloth
Nylon fabric for making mountaineering equipment
Polyamide tyre cord warp sheet for automotive tyres
Cotton backing cloth for abrasives
Polypropylene filter cloth: Part I - Filter cloth from
spun-polypropylene yarn
Rayon duck for industrial use
Polyamide duck for industrial use
Polyester/cotton belting ducks
Non-woven fusible interlinings - Specification
Non-woven sew-in interlinings - Specification
Textiles - Tyre cord warp sheet, polyamide, dipped Specification
Textiles - Asbestos yarn - Specification
Textiles - Fabric, woven glass fibre, for electrical
insulation and plastic laminate - Specification Part 1
Loomstate fabrics
Textiles - Fabric, woven glass fibre, for electrical
insulation and plastic laminate - Specification Part 2
Desized and finished fabrics
IS 13162 : Part 2
IS 13162 : Part 4
IS 13162 : Part 5
IS 14293
IS 14294
IS 14324
IS 14445
IS 1191
IS 1192
IS 2913
IS 2914
IS 3911
IS 3912
IS 3913
IS 3917
IS 2951 : Part 2
IS 2952 : Part 1
IS 2952 : Part 2
IS 3910
IS 3918
IS 4073
IS 4080
IS 4477 : Part 2
Geotextiles - Methods of test Part 2 Determination
of resistance to exposure of ultra-violet light and
water (Xenon arc type apparatus)
Geotextiles - Methods of test Part 4 Determination
of puncture resistance by falling cone method
Geotextiles - Methods of test Part 5 Determination
of tensile properties using a wide width strip
Geotextiles - Method of test for trapezoid tearing
strength
Geotextiles - Method for determination of apparant
opening size by dry sieving technique
Geotextiles - Methods of test for determination of
water permeability-permittivity
Textiles - Fabrics for awnings and camping tents Specification.
Glossary of terms and symbols used in connection
with the measurement of liquid flow with a free
surface
Velocity area Methods for measurement of flow of
water in open channels
Recommendation for determination of flow in tidal
channels
Recommendations for estimation of discharge by
establishing stage-discharge relation in open
channels
Surface floats - Functional requirements
Sounding rods - Functional requirements
Specification for suspended sediment load samplers
Specification for scoop type bed material samplers
Recommendation for estimation of flow of liquids in
closed conduits Part 2 Head loss in valves and
fittings
Recommendation for methods of measurement of
liquid flow by means of orifice plates and nozzles:
Part 1 Incompressible fluids
Recommendations for methods of measurement of
liquid flow by means of orifice plates and nozzles:
Part 2 Compressible fluids
Requirements for rotating element current meters
(cup type) for water flow measurement
Code of practice for use of current meter (cup type)
for water flow measurement
Specification for fish weights
Vertical staff gauges - Functional requirements
Methods of measurement of fluid flow by means of
venturi meters: Part 2 Compressible fluids
IS 4858
IS 6059
IS 6062
IS 6063
IS 6330
IS 9108