International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 August to 31 August 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8
Ships and marine technology
ISO/NP 13643-5
Ships and marine technology — Manoeuvring of ships
— Part 5: Submarine specials
ISO/CD 13643-6
Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials
ISO/NP 16145-4
Ships and marine technology — Protective coatings and inspection method — Part 4: Measuring method of water
soluble salts
TC 10
Technical product documentation
ISO/CD 11540-1
Writing and marking instruments — Part 1: Specification for caps to reduce the risk of asphyxiation
ISO/CD 11540-2
Writing and marking instruments — Part 2: Specification for end closures to reduce the risk of asphyxiaton
TC 20
Aircraft and space vehicles
ISO/CD 16697
Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials
ISO/CD 16698
Methods for estimation of future geomagnetic activity
TC 21
Equipment for fire protection and fire fighting
ISO 724024:2010/CD Amd 1
Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers — Amendment 1
TC 33
Refractories
ISO/CD 5017
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
TC 38
Textiles
ISO/CD 20743
Textiles — Determination of antibacterial activity of antibacterial finished products
TC 42
Photography
ISO/CD 22028-2
Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and
interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)
TC 44
Welding and allied processes
ISO/CD 669
Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
ISO/CD 5826
Resistance welding equipment — Transformers — General specifications applicable to all transformers
TC 86
Refrigeration and air-conditioning
ISO/WD 16345
Water-cooling towers — Testing and rating of thermal performance
TC 96
Cranes
ISO/CD 17440
Cranes — General Design — Limit states and proof of competence of forged hooks
TC 121
Anaesthetic and respiratory equipment
ISO/WD 16571
Medical gas systems - Systems for evacuation of plume generated by medical devices
TC 130
Graphic technology
ISO/CD 12647-4
Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints
— Part 4: Publication gravure printing
TC 131
Fluid power systems
ISO/NP 7241-1
Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements
TC 156
Corrosion of metals and alloys
ISO 8044:1999/CD
Amd 1
Corrosion of metals and alloys — Basic terms and definitions — Amendment 1
TC 157
Non-systemic contraceptives and STI barrier prophylactics
ISO/CD 4074
Natural latex rubber condoms — Requirements and test methods
TC 159
Ergonomics
ISO/CD 9241-391
Ergonomics of Human System Interaction — Part 391: Requirements, analysis and compliance test methods for the
reduction of photosensitive seizures
TC 163
Thermal performance and energy use in the built environment
ISO/NP 15758
Hygrothermal performance of building equipment and industrial installations — Calculation of water vapour diffusion —
Cold pipe insulation systems
TC 168
Prosthetics and orthotics
ISO/CD 16955
Quantification of physical parameters of ankle foot devices and foot units
TC 173
Assistive products for persons with disability
ISO/NP 7176-22
Wheelchairs — Part 22: Set-up procedures
TC 198
Sterilization of health care products
ISO 158831:2006/CD Amd 1
Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1
TC 201
Surface chemical analysis
ISO/CD 13083
Definition and calibration of the spatial resolution of electrical scanning-probe microscopes (ESPMs) such as SSRM and
SCM for 2D-dopant imaging and other purposes
TC 217
Cosmetics
ISO/NP TR 14735
Cosmetics - Minimising and determining nitrosamines in cosmetics
JTC 1
Information technology
ISO/IEC NP 14165243
Information technology — Fibre Channel — Part 243: Backbone-3 (FC-BB-3)
ISO/IEC 1449616/PDAM 2
Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) —
Amendment 2: Multi-resolution 3D mesh compression
ISO/IEC 154441:2004/PDAM 6
Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 6: Updated
ICC profile support and resolution clarification
ISO/IEC CD 2300010
Information technology — Multimedia application format (MPEG-A) — Part 10: Video surveillance application format
ISO/IEC CD 23005-1
Information technology — Media context and control — Part 1: Architecture
ISO/IEC CD 23005-2
Information technology — Media context and control — Part 2: Control information
ISO/IEC CD 23005-3
Information technology — Media context and control — Part 3: Sensory information
ISO/IEC CD 23005-4
Information technology — Media context and control — Part 4: Virtual world object characteristics
ISO/IEC CD 23005-5
Information technology — Media context and control — Part 5: Data formats for interaction devices
ISO/IEC CD 23005-6
Information technology — Media context and control — Part 6: Common types and tools
ISO/IEC 1979414/PDAM 1
Information technology — Biometric data interchange formats — Part 14: DNA data — Amendment 1: Conformance
Testing Methodology
DIS circulated
Period from 01 August to 31 August 2011
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
IIW
ISO/DIS 14346
International Institute of Welding
*
Welding — Static design procedure for hollow section joints
TC 8
Ships and marine technology
ISO/DIS 16548
Ships and marine technology — Ship design — General guidance on emergency towing
procedure
TC 17
Steel
ISO/DIS 13270
TC 22
*
Steel fibres for concrete — Definitions and specifications
Road vehicles
2012-01-23
2012-01-24
2012-01-18
ISO/DIS 6550-3
*
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing —
Part 3: M10 glow-plugs
2012-01-17
(Revision of ISO 6550-3:2009)
ISO/DIS 16750-3
*
Road vehicles — Environmental conditions and testing for electrical and electronic equipment —
Part 3: Mechanical loads
2012-01-13
(Revision of ISO 16750-3:2007)
TC 23
ISO/DIS 4254-1
Tractors and machinery for agriculture and forestry
*
Agricultural machinery — Safety — Part 1: General requirements
2012-01-05
(Revision of ISO 4254-1:2008)
TC 29
ISO/DIS 513
Small tools
*
Classification and application of hard cutting materials for metal removal with defined cutting
edges — Designation of the main groups and groups of application
2012-01-16
(Revision of ISO 513:2004)
TC 35
Paints and varnishes
ISO/DIS 1524
Paints, varnishes and printing inks — Determination of fineness of grind
2012-01-05
(Revision of ISO 1524:2000)
TC 42
Photography
ISO/DIS 12234-1
Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model
2012-01-10
(Revision of ISO 12234-1:2007)
TC 44
ISO/DIS 16338
Welding and allied processes
*
TC 48
ISO/DIS 6556
Welding for aerospace applications — Resistance spot and seam welding
2012-01-23
Laboratory equipment
*
Laboratory glassware — Filter flasks
2012-01-26
(Revision of ISO 6556:1981)
TC 58
ISO/DIS 19078
Gas cylinders
*
Gas cylinders — Inspection of the cylinder installation, and requalification of high pressure
cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
2012-01-03
(Revision of ISO 19078:2006)
TC 61
ISO/DIS 11963
Plastics
*
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
2012-01-12
(Revision of ISO 11963:1995)
ISO/DIS 13106
*
Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs
2012-01-20
ISO/DIS 13636
*
Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
2012-01-12
TC 85
ISO/DIS 8300
Nuclear energy, nuclear technologies, and radiological protection
*
Nuclear fuel technology — Determination of plutonium content in plutonium dioxide of nuclear
grade quality — Gravimetric method
2012-01-23
(Revision of ISO 8300:1987)
ISO/DIS 8425
*
Nuclear fuel technology — Determination of plutonium in pure plutonium nitrate solutions —
Gravimetric method
2012-01-23
(Revision of ISO 8425:1987)
TC 92
ISO/DIS 12468-1
Fire safety
*
External exposure of roofs to fire — Part 1: Test method
2012-01-17
(Revision of ISO 12468-1:2003)
TC 94
ISO
16602:2007/DAmd 1
Personal safety -- Protective clothing and equipment
*
ISO/DIS 16900-1.3
ISO/DIS 16900-11
*
TC 96
ISO/DIS 16625
Protective clothing for protection against chemicals — Classification, labelling and performance
requirements — Amendment 1
2012-01-27
Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of
inward leakage
2011-10-27
Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of
field of vision
2012-01-27
Cranes
*
Cranes and hoists — Selection of wire ropes, drums and sheaves
2012-01-24
(Revision of ISO 4308-2:1988, ISO 8087:1985, ISO 4308-1:2003)
Cranes — Safety requirements for loader cranes
ISO/DIS 15442
2012-01-16
(Revision of ISO 15442:2005)
TC 104
ISO/DIS 1496-1
Freight containers
*
Series 1 freight containers — Specification and testing — Part 1: General cargo containers for
general purposes
2012-01-18
(Revision of ISO 1496-1:1990, ISO 1496-1:1990/Amd 2:1998, ISO 1496-1:1990/Amd 1:1993, ISO
1496-1:1990/Amd 3:2005, ISO 1496-1:1990/Amd 4:2006, ISO 1496-1:1990/Amd 5:2006)
TC 112
ISO/DIS 14291
Vacuum technology
*
Vacuum gauges — Definitions and specifications for quadrupole mass spectrometers
TC 113
Hydrometry
ISO/DIS 4359
Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes
2012-01-12
2012-01-18
(Revision of ISO 4359:1983, ISO 4359:1983/Cor 1:1999)
TC 120
Leather
ISO
5431:1999/DAmd 1
Leather — Wet blue goat skins — Specification — Amendment 1
2012-01-16
ISO
5432:1999/DAmd 1
Leather — Wet blue sheep skins — Specification — Amendment 1
2012-01-16
ISO
5433:1999/DAmd 1
Leather — Bovine wet blue — Specification — Amendment 1
2012-01-16
TC 122
Packaging
ISO/DIS 18601
*
Packaging and the environment — General requirements for the use of ISO standards in the field
of packaging and the environment
2012-01-03
ISO/DIS 18602
*
Packaging and the environment — Optimization of the packaging system
2012-01-03
ISO/DIS 18603
*
Packaging and the environment — Reuse
2012-01-03
ISO/DIS 18604
*
Packaging and the environment — Material recycling
2012-01-03
ISO/DIS 18605
*
Packaging and the environment — Energy recovery
2012-01-03
ISO/DIS 18606
*
Packaging and the environment — Organic recycling
2012-01-03
TC 123
Plain bearings
ISO/DIS 13939
Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load
capacity, friction coefficient and lifetime
TC 130
Graphic technology
2012-01-24
ISO/DIS 15339-1
*
TC 131
Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles
and characterized reference printing conditions
2012-01-05
Fluid power systems
ISO/DIS 14540
*
Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action
couplings for use at a pressure of 72 MPa (720 bar)
2012-01-05
ISO/DIS 14541
*
Hydraulic fluid power — Dimensions and requirements for screw-to-connect type quick-action
couplings for general purpose
2012-01-05
TC 138
ISO/DIS 16422
Plastics pipes, fittings and valves for the transport of fluids
*
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance
of water under pressure — Specifications
2012-01-12
(Revision of ISO 16422:2006)
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum
operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems
ISO/DIS 17484-1
2012-01-24
(Revision of ISO 17484-1:2006, ISO 17484-1:2006/Cor 1:2008)
TC 156
Corrosion of metals and alloys
ISO/DIS 7539-11
Corrosion of metals and alloys — Stress corrosion cracking — Part 11: Guidelines for testing the
resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
2012-01-26
ISO/DIS 21601
Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion
cracks detected in service
2012-01-26
TC 172
Optics and photonics
ISO/DIS 10685-2
*
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification —
Part 2: Commercial information
2012-01-05
ISO/DIS 10685-3
*
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification —
Part 3: Technical information
2012-01-05
ISO/DIS 11979-1
*
Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary
2012-01-12
(Revision of ISO 11979-1:2006)
ISO/DIS 11979-3
*
Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods
2012-01-12
(Revision of ISO 11979-3:2006)
ISO 119794:2008/DAmd 1
*
TC 194
ISO/DIS 10993-3
Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information — Amendment 1
2012-01-12
Biological evaluation of medical devices
*
Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and
reproductive toxicity
2012-01-05
(Revision of ISO 10993-3:2003)
TC 199
ISO/DIS 13856-1
Safety of machinery
*
Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for
design and testing of pressure-sensitive mats and pressure-sensitive floors
2012-01-26
(Revision of ISO 13856-1:2001)
TC 206
Fine ceramics
ISO/DIS 13383-1
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural
characterization — Part 1: Determination of grain size and size distribution
2012-01-19
ISO/DIS 13383-2
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural
characterization — Part 2: Determination of phase volume fraction by evaluation of micrographs
2012-01-19
TC 213
ISO/DIS 1938-1
Dimensional and geometrical product specifications and verification
*
Geometrical product specifications (GPS) - Dimensional measuring equipment — Part 1: Plain
limit gauges of linear size
2012-01-19
(Revision of ISO/R 1938:1971)
ISO/DIS 25178-70
*
Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Physical
measurement standards
2012-01-19
ISO/DIS 25178-603.2
*
Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal
characteristics of non-contact (phase-shifting interferometric microscopy) instruments
2011-10-26
JTC 1
Information technology
ISO/IEC DIS 17568
Information technology — Telecommunications and information exchange between systems —
Close proximity electric induction wireless communications
2012-01-09
ISO/IEC DIS 17569
Information technology — Telecommunications and information exchange between systems —
Procedure for the registration of assigned numbers for ISO/IEC 17568
2012-01-09
ISO/IEC 109184:1999/DAmd 1
Information technology — Digital compression and coding of continuous-tone still images:
Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers,
SPIFF compression types and Registration Authorities (REGAUT) — Part 4: — Amendment 1:
Application specific marker list
2012-01-31
ISO/IEC DIS 10918-6
Information technology — Digital compression and coding of continuous-tone still images:
Application to printing systems — Part 6:
2012-01-20
ISO/IEC 138181:2007/DAmd 7
Information technology — Generic coding of moving pictures and associated audio information:
Systems — Part 1: — Amendment 7: Signalling of stereoscopic video in MPEG-2 systems
2012-01-17
ISO/IEC 144963:2009/DAmd 3
Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 3:
Transport of unified speech and audio coding (USAC)
2012-01-31
ISO/IEC 144965:2001/DAmd 31
Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 31: Reference software for efficient representation of 3D meshes with multiple
attributes
2012-01-20
ISO/IEC 1449622:2009/DAmd 2
Information technology — Coding of audio-visual objects — Part 22: Open Font Format —
Amendment 2: Additional script and language tags
2012-01-31
ISO/IEC 1449627:2009/DAmd 4
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance —
Amendment 4: Conformance for efficient representation of 3D meshes with multiple attributes
2012-01-20
ISO/IEC DIS 1449628
Information technology — Coding of audio-visual objects — Part 28: Composite font
representation
2012-01-20
ISO/IEC 154442:2004/DAmd 4
Information technology — JPEG 2000 image coding system: Extensions — Part 2: —
Amendment 4: Block coder extension
2012-01-31
ISO/IEC 2300012:2010/DAmd 2
Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music
application format — Amendment 2: Compact representation of dynamic volume change and
audio equalization
2012-01-20
ISO/IEC 230032:2010/DAmd 1
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding
(SAOC) — Amendment 1: SAOC conformance
2012-01-31
ISO/IEC 230032:2010/DAmd 2
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding
(SAOC) — Amendment 2: SAOC reference software
2012-01-31
ISO/IEC DIS 23006-1
Information technology — Multimedia service platform technologies — Part 1: Architecture
2012-01-23
(Revision of ISO/IEC CD 23006, ISO/IEC 23006-1:2011)
ISO/IEC DIS 23007-2
Information technology — Rich media user interfaces — Part 2: Advanced user interaction (AUI)
interfaces
2012-01-20
ISO/IEC DIS 29174-2
Information technology — UII scheme and encoding format for Mobile AIDC services — Part 2:
Registration procedures
2012-01-30
(Revision of ISO/IEC CD 29174)
ISO/IEC DIS 2382-37
Information technology — Vocabulary — Part 37: Harmonized biometric vocabulary
2012-01-09
ISO/IEC DIS 1979411.2
Information technology — Biometric data interchange formats — Part 11: Signature/sign
processed dynamic data
2012-01-31
ISO/IEC DIS 29109-5
Information technology — Conformance testing methodology for biometric data interchange
formats defined in ISO/IEC 19794 — Part 5: Face image data
2012-01-09
(Revision of ISO/IEC 29109-5:2011)
FDIS circulated
Period from 01 August to 31 August 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2
ISO/FDIS 4753
Fasteners
* Fasteners — Ends of parts with external ISO metric thread
2011-10-05
(Revision of ISO 4753:1999)
TC 6
ISO/FDIS 2493-2
Paper, board and pulps
* Paper and board — Determination of resistance to bending — Part 2: Taber-type tester
2011-10-26
(Revision of ISO 2493:1992)
TC 21
ISO/FDIS 15779
TC 23
ISO/FDIS 11783-4
Equipment for fire protection and fire fighting
* Condensed aerosol fire extinguishing systems — Requirements and test methods for
components and system design, installation and maintenance — General requirements
2011-10-13
Tractors and machinery for agriculture and forestry
* Tractors and machinery for agriculture and forestry — Serial control and communications data
network — Part 4: Network layer
2011-10-12
(Revision of ISO 11783-4:2001)
TC 34
Food products
ISO/FDIS 14470
* Food irradiation — Requirements for the development, validation and routine control of the
ionizing radiation used for the treatment of food
2011-10-23
ISO/FDIS 7970
* Wheat (Triticum aestivum L.) — Specification
2011-10-13
(Revision of ISO 7970:2000)
ISO/FDIS 3972
* Sensory analysis — Methodology — Method of investigating sensitivity of taste
2011-10-04
(Revision of ISO 3972:1991)
TC 35
ISO/FDIS 2431
Paints and varnishes
* Paints and varnishes — Determination of flow time by use of flow cups
2011-10-26
(Revision of ISO 2431:1993, ISO 2431:1993/Cor 1:1994, ISO 2431:1993/Cor 2:1999)
ISO/FDIS 7783
* Paints and varnishes — Determination of water-vapour transmission properties — Cup method
2011-10-19
(Revision of ISO 7783-1:1996, ISO 7783-2:1999, ISO 7783-1:1996/Cor 1:1998)
TC 38
ISO/FDIS 2959
Textiles
* Textiles — Woven fabric descriptions
2011-10-12
(Revision of ISO 2959:1973)
TC 41
ISO/FDIS 254
Pulleys and belts (including veebelts)
* Belt drives — Pulleys — Quality, finish and balance
2011-10-27
(Revision of ISO 254:1998)
TC 45
ISO/FDIS 34-2
Rubber and rubber products
* Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test
pieces
2011-10-23
(Revision of ISO 34-2:2007)
ISO/FDIS 1827
* Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid
plates — Quadruple-shear methods
2011-10-27
(Revision of ISO 1827:2007)
ISO/FDIS 2921
* Rubber, vulcanized — Determination of low-temperature characteristics — Temperatureretraction procedure (TR test)
2011-10-04
(Revision of ISO 2921:2005)
ISO/FDIS 7267-3
* Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones
method
2011-10-25
(Revision of ISO 7267-3:2007)
ISO/FDIS 13226
* Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on
vulcanized rubbers
2011-10-13
(Revision of ISO 13226:2005)
ISO/FDIS 124
* Latex, rubber — Determination of total solids content
2011-11-01
(Revision of ISO 124:2008)
ISO/FDIS 2475
* Chloroprene rubber (CR) — General-purpose types — Evaluation procedure
2011-10-13
(Revision of ISO 2475:1999, ISO 2475:1999/Cor 1:2001, ISO 2475:1999/Amd 1:2005)
ISO/FDIS 8511
* Rubber compounding ingredients — Carbon black — Determination of pellet size distribution
2011-10-06
(Revision of ISO 8511:1995)
ISO/FDIS 11852
TC 46
* Rubber — Determination of magnesium content of field and concentrated natural rubber latex by
titration
2011-10-16
Information and documentation
ISO/FDIS 30300
* Information and documentation — Management systems for records — Fundamentals and
vocabulary
2011-10-16
ISO/FDIS 30301
* Information and documentation — Management systems for records — Requirements
2011-10-16
TC 59
ISO/FDIS 21929-1
Buildings and civil engineering works
* Sustainability in building construction — Sustainability indicators — Part 1: Framework for the
development of indicators and a core set of indicators for buildings
2011-10-24
(Revision of ISO/TS 21929-1:2006)
TC 61
ISO/FDIS 1043-1
Plastics
* Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special
characteristics
2011-10-12
(Revision of ISO 1043-1:2001, ISO 1043-1:2001/DAmd 1.2)
ISO/FDIS 1043-2
* Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
2011-10-12
(Revision of ISO 1043-2:2000)
ISO/FDIS 23559
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
2011-10-30
(Revision of ISO 23559:2007)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO 218093:2008/FDAmd 1
* Petroleum and natural gas industries — External coatings for buried or submerged pipelines used
in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1
2011-10-27
ISO/FDIS 13503-1
* Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement
of viscous properties of completion fluids
2011-10-12
(Revision of ISO 13503-1:2003, ISO 13503-1:2003/Cor 1:2005)
ISO/FDIS 13706
* Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
2011-10-26
(Revision of ISO 13706:2005)
TC 85
ISO/FDIS 17874-3
TC 92
ISO 56582:2006/FDAmd 1
TC 118
Nuclear energy, nuclear technologies, and radiological protection
* Remote handling devices for radioactive materials — Part 3: Electrical master-slave manipulators
2011-10-13
Fire safety
* Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport
products in vertical configuration — Amendment 1
2011-10-17
Compressors and pneumatic tools, machines and equipment
ISO/FDIS 11148-1
* Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for
non-threaded mechanical fasteners
2011-10-12
ISO/FDIS 11148-2
* Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping
power tools
2011-10-12
ISO/FDIS 11148-5
* Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills
2011-10-12
ISO/FDIS 11148-8
* Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers
2011-10-12
ISO/FDIS 11148-9
* Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders
2011-10-12
ISO/FDIS 11148-10
* Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools
2011-10-12
ISO/FDIS 11148-11
* Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears
2011-10-12
TC 121
ISO/FDIS 8835-7
TC 131
Anaesthetic and respiratory equipment
* Inhalational anaesthesia systems — Part 7: Anaesthetic systems for use in areas with limited
logistical supplies of electricity and anaesthetic gases
2011-10-18
Fluid power systems
ISO/FDIS 15524
* Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar)
series, bores from 20 mm to 100 mm
2011-10-19
ISO/FDIS 4397
* Fluid power connectors and associated components — Nominal outside diameters of tubes and
nominal hose sizes
2011-10-04
(Revision of ISO 4397:1993)
ISO/FDIS 16873
* Hydraulic fluid power — Pressure switches — Mounting surfaces
2011-10-17
(Revision of ISO 16873:2002, ISO 16873:2002/Amd 1:2005)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 11296-7
* Plastics piping systems for renovation of underground non-pressure drainage and sewerage
networks — Part 7: Lining with spirally-wound pipes
2011-10-03
ISO/FDIS 19892
* Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test
method for the resistance of joints to pressure cycling
2011-10-17
TC 147
ISO/FDIS 13162
TC 197
ISO/FDIS 22734-2
Water quality
* Water quality — Determination of carbon 14 activity — Liquid scintillation counting method
2011-10-06
Hydrogen technologies
* Hydrogen generators using water electrolysis process — Part 2: Residential applications
2011-10-27
(Revision of ISO/CD 22734)
TC 202
ISO/FDIS 13067
TC 215
Microbeam analysis
* Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
2011-10-20
Health informatics
ISO/HL7 FDIS 27953-1
* Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 1:
Framework for adverse event reporting
2011-10-12
ISO/HL7 FDIS 27953-2
* Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 2:
Human pharmaceutical reporting requirements for ICSR
2011-10-12
TC 223
ISO/FDIS 22320
JTC 1
Societal security
* Societal security — Emergency management — Requirements for command and control
2011-10-23
Information technology
ISO/IEC FDIS 14908-1
* Interconnection of information technology equipment — Control network protocol — Part 1:
Protocol stack
2011-10-02
ISO/IEC FDIS 14908-2
* Interconnection of information technology equipment — Control network protocol — Part 2:
Twisted pair communication
2011-10-02
ISO/IEC FDIS 14908-3
* Interconnection of information technology equipment — Control network protocol — Part 3: Power
line channel specification
2011-10-02
ISO/IEC FDIS 14908-4
* Interconnection of information technology equipment — Control network protocol — Part 4: IP
communication
2011-10-02
ISO/IEC FDIS 16504
* Information technology — Telecommunications and information exchange between systems —
MAC and PHY for operation in TV white space
2011-10-23
ISO/IEC FDIS 14776372
* Information technology — Small Computer System Interface (SCSI) — Part 372: SCSI Enclosure
Services - 2 (SES-2)
2011-10-03
ISO/IEC FDIS 9797-3
* Information technology — Security techniques — Message Authentication Codes (MACs) — Part
3: Mechanisms using a universal hash-function
2011-10-04
ISO/IEC FDIS 11770-5
* Information technology — Security techniques — Key management — Part 5: Group key
management
2011-10-24
ISO/IEC FDIS 18031
* Information technology — Security techniques — Random bit generation
2011-10-06
(Revision of ISO/IEC 18031:2005, ISO/IEC 18031:2005/Cor 1:2009)
ISO/IEC FDIS 27007
* Information technology — Security techniques — Guidelines for information security management
systems auditing
2011-10-04
ISO/IEC FDIS 29128
* Information technology — Security techniques — Verification of cryptographic protocols
2011-10-17
ISO/IEC FDIS 29192-2
* Information technology — Security techniques — Lightweight cryptography — Part 2: Block
ciphers
2011-10-27
ISO/IEC FDIS 23005-7
* Information technology — Media context and control — Part 7: Conformance and reference
software
2011-10-04
ISO/IEC FDIS 15415
* Information technology — Automatic identification and data capture techniques — Bar code
symbol print quality test specification — Two-dimensional symbols
2011-10-17
(Revision of ISO/IEC 15415:2004, ISO/IEC 15415:2004/Cor 1:2008)
* Information technology — Learning, education, and training — Content packaging — Part 2: XML
binding
ISO/IEC FDIS 12785-2
2011-10-24
Standards published
New International Standards published between 01 August and 31 August 2011
* Available in English only
** French version of standard previously published in English only
Price group
IIW
International Institute of Welding
ISO 14271:2011
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot,
projection, and seam welds
TC 2
Fasteners
ISO 1580:2011
Slotted pan head screws — Product grade A
C
ISO 2009:2011
Slotted countersunk flat head screws — Product grade A
C
ISO 2010:2011
Slotted raised countersunk head screws — Product grade A
C
ISO 4766:2011
Slotted set screws with flat point
C
ISO 7045:2011
Pan head screws with type H or type Z cross recess — Product grade A
C
ISO 7046-1:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade
A — Part 1: Steel screws of property class 4.8
C
ISO 7046-2:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade
A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
C
ISO 7047:2011
Raised countersunk head screws (common head style) with type H or type Z cross recess — Product
grade A
C
TC 4
Rolling bearings
ISO 12090-1:2011
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions
and tolerances for series 1, 2 and 3
D
H
ISO 12090-2:2011
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions
and tolerances for series 4 and 5
TC 6
Paper, board and pulps
ISO 776:2011
Pulps — Determination of acid-insoluble ash
C
ISO 15320:2011
Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract
E
ISO 3781:2011
Paper and board — Determination of tensile strength after immersion in water
C
TC 8
Ships and marine technology
E
ISO 21070:2011
* Ships and marine technology — Marine environment protection — Management and handling of
shipboard garbage
J
ISO 13122:2011
* Ships and marine technology — Launching appliances for davit-launched liferafts
E
ISO 14409:2011
Ships and marine technology — Ship launching air bags
TC 10
Technical product documentation
ISO 29845:2011
TC 20
* Technical product documentation — Document types
F
U
Aircraft and space vehicles
ISO 10795:2011
* Space systems — Programme management and quality — Vocabulary
R
ISO 14620-2:2011
* Space systems — Safety requirements — Part 2: Launch site operations
H
TC 21
ISO 7203-3:2011
TC 22
ISO 12405-1:2011
Equipment for fire protection and fire fighting
* Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam
concentrates for top application to water-miscible liquids
R
Road vehicles
* Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems
— Part 1: High-power applications
U
TC 23
Tractors and machinery for agriculture and forestry
ISO 12809:2011
Crop protection equipment — Reciprocating positive displacement pumps and centrifugal pumps — Test
methods
F
ISO 82241:2003/Amd 1:2011
Traveller irrigation machines — Part 1: Operational characteristics and laboratory and field test methods
— Amendment 1
XZ
ISO 24631-6:2011
Radiofrequency identification of animals — Part 6: Representation of animal identification information
(visual display/data transfer)
TC 28
Petroleum products and lubricants
ISO 3405:2011
Petroleum products — Determination of distillation characteristics at atmospheric pressure
C
R
ISO 18132-1:2011
* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for
automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine
carriers and floating storage
L
ISO 18132-3:2011
* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for
automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on
board marine carriers and floating storage
M
TC 29
Small tools
ISO 2238:2011
Machine bridge reamers
C
ISO 6261:2011
Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation
F
TC 31
Tyres, rims and valves
ISO 42231:2002/Amd 1:2011
Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres — Amendment 1
ISO 15222:2011
Truck and bus tyres — Method for measuring relative wet grip performance — Loaded new tyres
TC 34
Food products
ISO 3632-1:2011
* Spices — Saffron (Crocus sativus L.) — Part 1: Specification
XZ
K
D
ISO
16140:2003/Amd
1:2011
Microbiology of food and animal feeding stuffs — Protocol for the validation of alternative methods —
Amendment 1
ISO 6493:2000
Animal feeding stuffs — Determination of starch content — Polarimetric method
TC 35
Paints and varnishes
ISO 4628-6:2011
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of
defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking
by tape method
C
ISO 6272-1:2011
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, largearea indenter
D
ISO 6272-2:2011
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, smallarea indenter
C
TC 37
Terminology and other language and content resources
ISO 24614-2:2011
* Language resource management — Word segmentation of written texts — Part 2: Word segmentation for
Chinese, Japanese and Korean
XZ
E
S
TC 38
Textiles
ISO 14184-1:2011
Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction
method)
D
ISO 14184-2:2011
Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour absorption method)
F
* Textiles and textile products — Guidelines on the determination of the precision of a standard test method
by interlaboratory trials
H
ISO/TR
24697:2011
TC 42
ISO 3665:2011
Photography
* Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications
E
TC 44
Welding and allied processes
ISO 10863:2011
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
TC 45
Rubber and rubber products
ISO
4671:2007/Amd
1:2011
Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses
and the lengths of hose assemblies — Amendment 1: Clarification of position at which outside diameter is
measured
XZ
ISO
6801:1983/Amd
1:2011
Rubber or plastics hoses — Determination of volumetric expansion — Amendment 1: Deletion of alcohol
as pressurizing fluid
XZ
P
ISO 1853:2011
* Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
E
ISO 5600:2011
* Rubber — Determination of adhesion to rigid materials using conical shaped parts
D
ISO 5603:2011
* Rubber, vulcanized — Determination of adhesion to wire cord
H
ISO 2303:2011
ISO 5794-3:2011
Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedures
* Rubber compounding ingredients — Silica, precipitated, hydrated — Part 3: Evaluation procedures in a
blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
G
D
TC 46
Information and documentation
ISO 15511:2011
Information and documentation — International standard identifier for libraries and related organizations
(ISIL)
ISO 25964-1:2011
* Information and documentation — Thesauri and interoperability with other vocabularies — Part 1:
Thesauri for information retrieval
ISO/TR 230813:2011
* Information and documentation — Managing metadata for records — Part 3: Self-assessment method
TC 51
ISO 13194:2011
D
XC
D
Pallets for unit load method of materials handling
* Box pallets — Principal requirements and test methods
L
TC 61
Plastics
ISO 25762:2009
Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced
polymer composites
N
ISO 11357-3:2011
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy
of melting and crystallization
C
ISO 11357-6:2008
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time
(isothermal OIT) and oxidation induction temperature (dynamic OIT)
F
ISO 10640:2011
Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
N
ISO 4901:2011
* Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene
monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
ISO 3598:2011
Textile glass — Yarns — Basis for a specification
TC 69
Applications of statistical methods
ISO 3951-4:2011
* Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality
levels
E
B
M
ISO 13053-1:2011
Quantitative methods in process improvement — Six Sigma — Part 1: DMAIC methodology
P
ISO 13053-2:2011
Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques
T
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO/TR
16475:2011
Guidelines for the repair of water-leakage cracks in concrete structures
TC 79
Light metals and their alloys
ISO 7599:2010
Anodizing of aluminium and its alloys — General specifications for anodic oxidation coatings on
aluminium
H
L
ISO 11707:2011
* Magnesium and its alloys — Determination of lead and cadmium
D
ISO 6361-1:2011
* Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for
inspection and delivery
E
ISO 6361-2:2011
* Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
U
ISO 6361-3:2011
* Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on
shape and dimensions
B
ISO 6361-4:2011
* Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates:
Tolerances on shape and dimensions
F
ISO 6361-5:2011
* Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition
C
TC 83
Sports and recreational equipment
ISO 7795:2011
Cross-country skis — Ski-binding screws — Test methods
C
TC 92
ISO 12136:2011
Fire safety
* Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
ISO 19706:2011
Guidelines for assessing the fire threat to people
TC 94
Personal safety -- Protective clothing and equipment
ISO 27065:2011
Protective clothing — Performance requirements for protective clothing worn by operators applying liquid
pesticides
T
F
J
ISO 16900-4:2011
* Respiratory protective devices — Methods of test and test equipment — Part 4: Determination of gas filter
capacity and migration, desorption and carbon monoxide dynamic testing
H
ISO/TS 169763:2011
* Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of
oxygen and limitations of carbon dioxide in the breathing environment
L
TC 106
Dentistry
ISO
24234:2004/Amd
1:2011
Dentistry — Mercury and alloys for dental amalgam — Amendment 1: Requirements for marking and
manufacturer's instructions concerning mercury
ISO 1797-1:2011
Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals
E
ISO 7711-2:2011
Dentistry — Rotary diamond instruments — Part 2: Discs
F
ISO 7494-1:2011
Dentistry — Dental units — Part 1: General requirements and test methods
D
TC 108
Mechanical vibration, shock and condition monitoring
ISO 16063-41:2011
TC 112
ISO 27893:2011
TC 121
ISO 80601-213:2011
TC 130
ISO 159308:2010/Cor 1:2011
* Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers
XZ
S
Vacuum technology
* Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by
direct comparison with a reference gauge
H
Anaesthetic and respiratory equipment
* Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential
performance of an anaesthetic workstation
X
Graphic technology
* Graphic technology — Prepress digital data exchange using PDF — Part 8: Partial exchange of printing
data using PDF 1.6 (PDF/X-5) — Technical Corrigendum 1
free
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 9311-2:2011
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
D
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by
determination of the gel content
B
TC 142
Cleaning equipment for air and other gases
ISO 29464:2011
* Cleaning equipment for air and other gases — Terminology
TC 146
Air quality
ISO 25139:2011
Stationary source emissions — Manual method for the determination of the methane concentration using
gas chromatography
TC 147
Water quality
ISO 18857-2:2009
Water quality — Determination of selected alkylphenols — Part 2: Gas chromatographic-mass
spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples
following solid-phase extraction and derivatisation
M
J
J
TC 150
ISO 5834-2:2011
Implants for surgery
* Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms
C
TC 155
Nickel and nickel alloys
ISO 22033:2011
Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric
method
TC 159
Ergonomics
ISO 26800:2011
Ergonomics — General approach, principles and concepts
TC 160
Glass in building
ISO 12543-1:2011
Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of
component parts
D
ISO 12543-2:2011
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
C
ISO 12543-3:2011
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass
C
ISO 12543-4:2011
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability
F
ISO 12543-5:2011
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
E
ISO 12543-6:2011
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
C
TC 164
Mechanical testing of metals
ISO 12111:2011
TC 172
ISO 9344:2011
ISO 10943:2011
ISO/TR 212544:2011
TC 173
ISO 24415-2:2011
TC 201
* Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
F
J
M
Optics and photonics
* Microscopes — Graticules for eyepieces
Ophthalmic instruments — Indirect ophthalmoscopes
* Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 4:
Inspection, detection and measurement
B
B
K
Assistive products for persons with disability
* Tips for assistive products for walking — Requirements and test methods — Part 2: Durability of tips for
crutches
C
Surface chemical analysis
ISO/TR
14187:2011
* Surface chemical analysis — Characterization of nanostructured materials
R
ISO 14701:2011
* Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide
thickness
H
TC 206
Fine ceramics
ISO 28703:2011
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal-shock
resistance of porous ceramics
C
ISO 28704:2011
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending
fatigue of porous ceramics at room temperature
D
TC 211
Geographic information/Geomatics
ISO 19110:2005
Geographic information — Methodology for feature cataloguing
TC 213
Dimensional and geometrical product specifications and verification
ISO 5459:2011
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
U
X
TC 215
Health informatics
ISO/HL7
10781:2009
Electronic Health Record-System Functional Model, Release 1.1
TC 219
Floor coverings
XD
ISO 10581:2011
* Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specification
D
ISO 24343-2:2011
* Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2:
Short-term residual indentation of resilient floor covering
B
ISO 24343-3:2011
* Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3:
Indentation of resilient semi-flexible/vinyl composition tiles
B
TC 229
ISO/TS
10868:2011
TC 234
ISO 12877:2011
Nanotechnologies
* Nanotechnologies — Characterization of single-wall carbon nanotubes using ultraviolet-visible-near
infrared (UV-Vis-NIR) absorption spectroscopy
K
Fisheries and aquaculture
* Traceability of finfish products — Specification on the information to be recorded in farmed finfish
distribution chains
TMB
Technical Management Board
IWA 9:2011
Framework for managing sustainable development in business districts
JTC 1
Information technology
S
N
ISO/IEC
40210:2011
* Information technology — W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition)
A
ISO/IEC
40220:2011
* Information technology — W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition)
A
ISO/IEC
40230:2011
* Information technology — W3C SOAP Message Transmission Optimization Mechanism
A
ISO/IEC
40240:2011
* Information technology — W3C Web Services Addressing 1.0 — Core
A
ISO/IEC
40250:2011
* Information technology — W3C Web Services Addressing 1.0 — SOAP Binding
A
ISO/IEC
40260:2011
* Information technology — W3C Web Services Addressing 1.0 — Metadata
A
ISO/IEC
40270:2011
* Information technology — W3C Web Services Policy 1.5 — Framework
A
ISO/IEC
40280:2011
* Information technology — W3C Web Services Policy 1.5 — Attachment
A
ISO/IEC
14651:2011
Information technology — International string ordering and comparison — Method for comparing
character strings and description of the common template tailorable ordering
S
ISO/IEC
18052:2011
* Information technology — Telecommunications and information exchange between systems — Protocol
for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC 141432:2011
* Information technology — Software measurement — Functional size measurement — Part 2: Conformity
evaluation of software size measurement methods to ISO/IEC 14143-1
N
ISO/IEC TR 247482:2011
* Systems and software engineering — Life cycle management — Part 2: Guide to the application of
ISO/IEC 15288 (System life cycle processes)
W
ISO/IEC TR 247483:2011
* Systems and software engineering — Life cycle management — Part 3: Guide to the application of
ISO/IEC 12207 (Software life cycle processes)
XA
ISO/IEC TR 291101:2011
* Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview
XK
G
ISO/IEC TR 291103:2011
* Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3: Assessment guide
C
ISO/IEC 29341-143:2011
* Information technology — UPnP Device Architecture — Part 14-3: Audio Video Device Control Protocol
— Level 3 — Media Server Device
K
ISO/IEC 29341-161:2011
* Information technology — UPnP Device Architecture — Part 16-1: Low Power Device Control Protocol —
Low Power Architecture
Q
ISO/IEC 29341-171:2011
* Information technology — UPnP Device Architecture — Part 17-1: Quality of Service Device Control
Protocol — Level 3 — Quality of Service Architecture
R
ISO/IEC 29341-181:2011
* Information technology — UPnP Device Architecture — Part 18-1: Remote Access Device Control
Protocol — Remote Access Architecture
K
ISO/IEC 29341-182:2011
* Information technology — UPnP Device Architecture — Part 18-2: Remote Access Device Control
Protocol — Remote Access Client Device
C
ISO/IEC 29341-183:2011
* Information technology — UPnP Device Architecture — Part 18-3: Remote Access Device Control
Protocol — Remote Access Server Device
C
ISO/IEC 29341-184:2011
* Information technology — UPnP Device Architecture — Part 18-4: Remote Access Device Control
Protocol — Remote Access Discovery Agent Device
C
ISO/IEC 29341-191:2011
* Information technology — UPnP Device Architecture — Part 19-1: Solar Protection Blind Device Control
Protocol — Solar Protection Blind Device
B
ISO/IEC 29341-1610:2011
* Information technology — UPnP Device Architecture — Part 16-10: Low Power Device Control Protocol
— Low Power Proxy Service
F
ISO/IEC 29341-1611:2011
* Information technology — UPnP Device Architecture — Part 16-11: Low Power Device Control Protocol
— Low Power Service
G
ISO/IEC 29341-1711:2011
* Information technology — UPnP Device Architecture — Part 17-11: Quality of Service Device Control
Protocol — Level 3 — Quality of Service Manager Service
X
ISO/IEC 29341-1712:2011
* Information technology — UPnP Device Architecture — Part 17-12: Quality of Service Device Control
Protocol — Level 3 — Quality of Service Policy Holder Service
P
ISO/IEC 29341-1713:2011
* Information technology — UPnP Device Architecture — Part 17-13: Quality of Service Device Control
Protocol — Level 3 — Quality of Service Device Service — Underlying Technology Interfaces
H
ISO/IEC 29341-1810:2011
* Information technology — UPnP Device Architecture — Part 18-10: Remote Access Device Control
Protocol — Remote Access Inbound Connection Configuration Service
G
ISO/IEC 29341-1811:2011
* Information technology — UPnP Device Architecture — Part 18-11: Remote Access Device Control
Protocol — Remote Access Discovery Agent Service
F
ISO/IEC 29341-1812:2011
* Information technology — UPnP Device Architecture — Part 18-12: Remote Access Device Control
Protocol — Remote Access Discovery Agent Synchronization Service
K
ISO/IEC 29341-1813:2011
* Information technology — UPnP Device Architecture — Part 18-13: Remote Access Device Control
Protocol — Remote Access Transport Agent Configuration Service
S
ISO/IEC
27035:2011
* Information technology — Security techniques — Information security incident management
W
ISO/IEC 248005:2011
* Information technology — JPSearch — Part 5: Data interchange format between image repositories
F
ISO/IEC
24753:2011
* Information technology — Radio frequency identification (RFID) for item management — Application
protocol: encoding and processing rules for sensors and batteries
W
ISO/IEC 247541:2008/Cor 1:2011
* Information technology — Document description and processing languages — Minimum requirements for
specifying document rendering systems — Part 1: Feature specifications for document rendering systems
— Technical Corrigendum 1
ISO/IEC 295001:2011
* Information technology — Document description and processing languages — Office Open XML File
Formats — Part 1: Fundamentals and Markup Language Reference
XL
ISO/IEC 295002:2011
* Information technology — Document description and processing languages — Office Open XML File
Formats — Part 2: Open Packaging Conventions
XL
free
ISO/IEC 295003:2011
* Information technology — Document description and processing languages — Office Open XML File
Formats — Part 3: Markup Compatibility and Extensibility
XL
ISO/IEC 295004:2011
* Information technology — Document description and processing languages — Office Open XML File
Formats — Part 4: Transitional Migration Features
XL
Standards confirmed
The following International Standards are confimred for a five year period:
TC 6
Paper, board and pulps
ISO 22891:2007
TC 45
Rubber and rubber products
ISO 7725:1991
(reconfirmed)
TC 77
Products in fibre reinforced cement
ISO 390:1993
(reconfirmed)
TC 87
Cork
ISO 2190:1998
(reconfirmed)
TC 110
Industrial trucks
ISO 22877:2004
ISO 22878:2004
ISO 22880:2004
ISO 22882:2004
ISO 22883:2004
ISO 22884:2004
TC 112
Vacuum technology
ISO 1608-1:1993
(reconfirmed)
ISO 1608-2:1989
(reconfirmed)
ISO 3529-1:1981
(reconfirmed)
ISO 3669:1986
(reconfirmed)
ISO/TS 3669-2:2007
TC 131
Fluid power systems
ISO 4392-3:1993
(reconfirmed)
ISO 6403:1988
(reconfirmed)
ISO 17559:2003
TC 146
Air quality
ISO 10155:1995
(reconfirmed)
ISO 10780:1994
(reconfirmed)
ISO 4226:2007
TC 168
Prosthetics and orthotics
ISO 8549-1:1989
(reconfirmed)
ISO 8549-2:1989
(reconfirmed)
ISO 8549-3:1989
(reconfirmed)
ISO 10328:2006
ISO 13404:2007
ISO 22523:2006
ISO 22675:2006
TC 171
Document management applications
ISO 6200:1999
(reconfirmed)
TC 195
Building construction machinery and equipment
ISO 18650-1:2004
ISO 21573-1:2006
TC 222
Personal financial planning
ISO 22222:2005
JTC 1
Information technology
ISO/IEC 7942-1:1994
(reconfirmed)
ISO/IEC 8806-4:1991
(reconfirmed)
ISO/IEC 9637-1:1994
(reconfirmed)
ISO/IEC 9638-3:1994
(reconfirmed)
ISO/IEC 12087-2:1994
(reconfirmed)
Standards withdrawn
Period from 01 August to 31 August 2011
TC 34
Food products
ISO/TS 3632-1:2003
(replaced by ISO 3632-1:2011)
TC 46
Information and documentation
ISO 2788:1986
(replaced by ISO 25964-1:2011)
ISO 5964:1985
(replaced by ISO 25964-1:2011)
TC 112
Vacuum technology
ISO/TS 27893:2009
(replaced by ISO 27893:2011)
TC 121
Anaesthetic and respiratory equipment
ISO 8835-2:2007
(replaced by ISO 80601-2-13:2011)
ISO 8835-3:2007
(replaced by ISO 80601-2-13:2011)
ISO 8835-4:2004
(replaced by ISO 80601-2-13:2011)
ISO 8835-5:2004
(replaced by ISO 80601-2-13:2011)
IEC 60601-2-13:2003
(replaced by ISO 80601-2-13:2011)
TC 142
Cleaning equipment for air and other gases
ISO 3649:1980
(replaced by ISO 29464:2011)
JTC 1
Information technology
ISO/IEC TR
15271:1998
(replaced by ISO/IEC TR 24748-3:2011)
ISO/IEC TR
19760:2003
(replaced by ISO/IEC TR 24748-2:2011)
ISO/IEC TR
18044:2004
(replaced by ISO/IEC 27035:2011)
ISO/IEC 295001:2008/Amd 1:2010
(replaced by )
ISO/IEC 295004:2008/Amd 1:2010
(replaced by )
Meeting calendar
(update at 01 August 2011)
Meetings called for the month of July are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September 2011
1-3
Kassel (Germany)
TC 180
Solar energy
2
Kassel (Germany)
TC 180/SC 4
Solar energy/Systems - Thermal performance, reliability and durability
7-9
Kobe (Japan)
TC 8/SC 1
Ships and marine technology/Lifesaving and fire protection
8
Paris (France)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
8-9
Edinburgh (United
Kingdom)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
10-17
Shanghai (China)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
12-14
Chicago (USA)
TC 205
Building environment design
12-16
Vienna (Austria)
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical
vibration and shock
12-16
Florianopolis
(Brazil)
TC 150
Implants for surgery
12-16
London (United
Kingdom)
TC 262
Project committee: Risk management
13
Florianopolis
(Brazil)
TC 150/SC 1
Implants for surgery/Materials
13
Florianopolis
(Brazil)
TC 150/SC 7
Implants for surgery/Tissue-engineered medical products
13-14
Florianopolis
(Brazil)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
13-15
Moscow (Russian
Federation)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
14
Geneva
(Switzerland)
TC 154
Processes, data elements and documents in commerce, industry and administration
14
Brescia (Italy)
TC 201/SC 9
Surface chemical analysis/Scanning probe microscopy
14-15
Helsinki (Finland)
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
14-15
Chicago (USA)
TC 163
Thermal performance and energy use in the built environment
15
Florianopolis
(Brazil)
TC 150/SC 2
Implants for surgery/Cardiovascular implants and extracorporeal systems
15
Florianopolis
(Brazil)
TC 150/SC 4
Implants for surgery/Bone and joint replacements
15
Florianopolis
(Brazil)
TC 150/SC 6
Implants for surgery/Active implants
15
Brescia (Italy)
TC 201/SC 1
Surface chemical analysis/Terminology
15
Brescia (Italy)
TC 201/SC 2
Surface chemical analysis/General procedures
15-17
Brescia (Italy)
TC 201
Surface chemical analysis
16
Brescia (Italy)
TC 201/SC 4
Surface chemical analysis/Depth profiling
16
Brescia (Italy)
TC 201/SC 5
Surface chemical analysis/Auger electron spectroscopy
16
Brescia (Italy)
TC 201/SC 7
Surface chemical analysis/X-ray photoelectron spectroscopy
16-22
Berlin (Germany)
TC 130
Graphic technology
17
Brescia (Italy)
TC 201/SC 3
Surface chemical analysis/Data management and treatment
17
Brescia (Italy)
TC 201/SC 8
Surface chemical analysis/Glow discharge spectroscopy
18
Trento (Italy)
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
18-24
Phoenix (USA)
TC 106
Dentistry
19
Chicago (USA)
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
19-20
Copenhagen
(Denmark)
JTC 1/SC 22
Information technology/Programming languages, their environments and system software
interfaces
19-20
La Plaine St-Denis
(France)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
19-20
New Delhi (India)
TMB
Technical Management Board
19-21
San Francisco
(USA)
TC 243
Project Committee: Consumer product safety
19-21
London (United
Kingdom)
TC 246
Project committee: Anti-counterfeiting tools
19-22
Paris (France)
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
19-23
Seoul (Korea,
Republic of)
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
19-23
Bali (Indonesia)
TC 165
Timber structures
19-23
Adelaide (Australia)
TC 190
Soil quality
19-23
Adelaide (Australia)
TC 190/SC 2
Soil quality/Sampling
20
Chicago (USA)
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting
systems using foam and powder
20
Berlin (Germany)
TC 29/SC 8
Small tools/Tools for pressing and moulding
20-22
Paris (France)
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
20-23
Paris (France)
TC 59/SC 8
Buildings and civil engineering works/Sealants
20-23
Gaithersburg
(USA)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
21
Chicago (USA)
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
21
Paris (France)
TC 164/SC 2
Mechanical testing of metals/Ductility testing
21
Adelaide (Australia)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
21-22
Chicago (USA)
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using
gas
21-23
New Delhi (India)
GA
General Assembly
21-23
Amsterdam
(Netherlands)
TC 225
Market, opinion and social research
22
Chicago (USA)
TC 21/SC 11
Equipment for fire protection and fire fighting/Smoke and heat control systems and
components
22
Singapore
(Singapore)
TC 59/SC 13
Buildings and civil engineering works/Organization of information about construction works
22
La Plaine St-Denis
(France)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
22
La Plaine St-Denis
(France)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
22
La Plaine St-Denis
(France)
TC 79/SC 9
Light metals and their alloys/Symbolization
*
*
*
22
Sao Paulo (Brazil)
TC 142
Cleaning equipment for air and other gases
22
Adelaide (Australia)
TC 190/SC 4
Soil quality/Biological methods
22
Adelaide (Australia)
TC 190/SC 7
Soil quality/Soil and site assessment
22
Beijing (China)
TC 213
Dimensional and geometrical product specifications and verification
22-23
Las Vegas (USA)
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
22-23
La Plaine St-Denis
(France)
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
22-23
San Francisco
(USA)
TC 240
Project Committee: Product recall
23
Chicago (USA)
TC 21
Equipment for fire protection and fire fighting
23
La Plaine St-Denis
(France)
TC 79
Light metals and their alloys
23
Adelaide (Australia)
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
24
New Delhi (India)
COUNCIL
Council
25-26
London (United
Kingdom)
TC 254
Safety of amusement rides and amusement devices
26
Bangkok (Thailand)
TC 44/SC 9
Welding and allied processes/Health and safety
26-27
Geneva
(Switzerland)
TAG 8
Building
26-30
Kharkov (Ukraine)
TC 218
Timber
27
Valencia (Spain)
IULTCS
International Union of Leather Technologists and Chemists Societies
28
Kuala Lumpur
(Malaysia)
TC 61/SC 4
Plastics/Burning behaviour
28
La Plaine St-Denis
(France)
TC 206
Fine ceramics
29
Gothenburg
(Sweden)
TC 22/SC 9
Road vehicles/Vehicle dynamics and road-holding ability
29
Vienna (Austria)
TC 146/SC 3
Air quality/Ambient atmospheres
29
Vienna (Austria)
TC 146/SC 6
Air quality/Indoor air
29-30
Riverside (USA)
TC 58/SC 2
Gas cylinders/Cylinder fittings
30
Busan (Korea,
Republic of)
JTC 1/SC 34
Information technology/Document description and processing languages
*
3rd Quarter 2011
Sapporo (Japan)
**
TC 184/SC 1
Automation systems and integration/Physical device control
October 2011
3-7
London (United
Kingdom)
TC 146/SC 2
Air quality/Workplace atmospheres
4-6
Dublin (Ireland)
TC 34/SC 17
Food products/Management systems for food safety
4-7
Sapporo (Japan)
TC 159/SC 5
Ergonomics/Ergonomics of the physical environment
5
Sydney
(Australia)
TC 89/SC 1
Wood-based panels/Fibre boards
5
Sydney
(Australia)
TC 89/SC 2
Wood-based panels/Particle boards
5-7
Songdo (Korea,
Republic of)
JTC 1/SC 17
Information technology/Cards and personal identification
6
San Diego (USA) *
TC 79/SC 11
Light metals and their alloys/Titanium
6
San Antonio
(USA)
TC 92/SC 2
Fire safety/Fire containment
6-7
Geneva
(Switzerland)
CASCO
Committee on conformity assessment
7
Sydney
(Australia)
TC 89
Wood-based panels
9
Beijing (China)
TC 27/SC 1
Solid mineral fuels/Coal preparation: Terminology and performance
9-14
Beijing (China)
*
TC 27
Solid mineral fuels
9-14
Tampa, Florida
(USA)
*
TC 204
Intelligent transport systems
10
Beijing (China)
TC 27/SC 5
Solid mineral fuels/Methods of analysis
10-11
Milan (Italy)
TC 209
Cleanrooms and associated controlled environments
10-14
Berlin (Germany)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
10-14
Dublin (Ireland)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
10-14
Bangkok
(Thailand)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
10-14
Berlin (Germany)
TC 160
Glass in building
10-14
Nanjing (China)
TC 193
Natural gas
10-14
Nanjing (China)
TC 193/SC 1
Natural gas/Analysis of natural gas
10-14
Washington, D.C
(USA)
TC 251
Project committee: Asset management
11-12
Paris (France)
TC 17/SC 20
Steel/General technical delivery conditions, sampling and mechanical testing methods
12-13
Bangalore (India)
TC 34/SC 15
Food products/Coffee
12-14
Okinawa (Japan)
TC 172/SC 3
Optics and photonics/Optical materials and components
13
Maryland (USA)
TC 22/SC 5
Road vehicles/Engine tests
13
Annapolis (USA)
TC 22/SC 7
Road vehicles/Injection equipment and filters for use on road vehicles
13
Annapolis (USA)
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
13
Vienna (Austria)
TC 146/SC 1
Air quality/Stationary source emissions
13
Berlin (Germany)
TC 160/SC 1
Glass in building/Product considerations
13
Tokyo (Japan)
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
14
London (United
Kingdom)
TC 25
Cast irons and pig irons
14
Berlin (Germany)
TC 160/SC 2
Glass in building/Use considerations
16-21
Suzhou (China)
TC 184/SC 4
Automation systems and integration/Industrial data
17
Berlin (Germany)
TC 2/SC 7
Fasteners/Reference standards
*
**
19
Berlin (Germany)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
17-21
Yokohama
(Japan)
TC 45
Rubber and rubber products
17-21
Alexandria
(USA)
TC 210
Quality management and corresponding general aspects for medical devices
18
Berlin (Germany)
TC 2/SC 11
Fasteners/Fasteners with metric external thread
18
Teddington
(United
Kingdom)
TC 202
Microbeam analysis
18-19
Beijing (China)
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
18-20
Seattle (USA)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
18-20
Lisbon (Portugal)
TC 58/SC 3
Gas cylinders/Cylinder design
19
Berlin (Germany)
TC 2
Fasteners
20
Yokohama
(Japan)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
20
Ottawa (Canada)
TC 92/SC 3
Fire safety/Fire threat to people and environment
20
Beijing (China)
TC 111
Round steel link chains, chain slings, components and accessories
20
Beijing (China)
TC 111/SC 3
Round steel link chains, chain slings, components and accessories/Components and accessories
20-21
Berlin (Germany)
TC 2/SC 14
Fasteners/Surface coatings
21
Ottawa (Canada)
TC 92/SC 4
Fire safety/Fire safety engineering
21
Paris (France)
TC 244
Industrial furnaces and associated processing equipment
24
London (United
Kingdom)
TC 41/SC 3
Pulleys and belts (including veebelts)/Conveyor belts
24-25
Genoa (Italy)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
24-25
Paris (France)
TC 253
Project committee: Treated wastewater re-use for irrigation
24-28
Helsinki
(Finland)
TC 8
Ships and marine technology
24-28
Amsterdam
(Netherlands)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
24-28
Ottawa (Canada)
TC 181
Safety of toys
24-29
Beijing (China)
TC 176
Quality management and quality assurance
25
Osaka (Japan)
TC 38/SC 23
Textiles/Fibres and yarns
25
London (United
Kingdom)
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
25
Amsterdam
(Netherlands)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
25-26
Genoa (Italy)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes
personnel
25-27
Beltsville,
Maryland (USA)
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
26
Osaka (Japan)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
*
**
26
London (United
Kingdom)
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
26
Amsterdam
(Netherlands)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
26
Amsterdam
(Netherlands)
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
of gaseous fuels
26-28
Troy (USA)
TC 22
Road vehicles
26-28
Nanjing (China)
TC 70
Internal combustion engines
27
Osaka (Japan)
TC 38
Textiles
27
London (United
Kingdom)
TC 41
Pulleys and belts (including veebelts)
27
Madrid (Spain)
TC 87
Cork
27
Amsterdam
(Netherlands)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
applications
27
Amsterdam
(Netherlands)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
valves of plastic materials and their accessories -- Test methods and basic specifications
27
Amsterdam
(Netherlands)
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
all applications
27
Elda (Alicante)
(Spain)
TC 216
Footwear
27-28
Genoa (Italy)
TC 44
Welding and allied processes
27-28
Moscow
(Russian
Federation)
TC 178
Lifts, escalators and moving walks
28
Ottawa (Canada)
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering works
31
Melbourne
(Australia)
*
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
Oslo (Norway)
**
TC 59/SC 14
Buildings and civil engineering works/Design life
London (United
Kingdom)
**
TC 59/SC 15
Buildings and civil engineering works/Performance criteria for single family attached and detached
dwellings
**
*
*
*
October-November 2011
21-4
Brussels
(Belgium)
TC 92/SC 1
Fire safety/Fire initiation and growth
31-3
London (United
Kingdom)
TC 46/SC 11
Information and documentation/Archives/records management
31-3
Bangkok
(Thailand)
TC 238
Solid biofuels
31-4
Washington, D.C
(USA)
TC 242
Energy Management
November 2011
2
Bangkok
(Thailand)
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
2
Bangkok
(Thailand)
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
2-3
Houston (USA)
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Offshore structures
*
2-3
Winterthur
(Switzerland)
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
3
Kyoto (Japan)
TC 33
Refractories
3
Bangkok
(Thailand)
TC 123/SC 5
Plain bearings/Quality analysis and assurance
3
Bangkok
(Thailand)
TC 123/SC 6
Plain bearings/Terms and common items
3-4
Washington, D.C
(USA)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
4
Troy (USA)
TC 22/SC 10
Road vehicles/Impact test procedures
4
Troy (USA)
TC 22/SC 12
Road vehicles/Passive safety crash protection systems
4
Paris (France)
TC 22/SC 21
Road vehicles/Electrically propelled road vehicles
4
Cincinnati (USA)
TC 60
Gears
4
Bangkok
(Thailand)
TC 123
Plain bearings
4
Bangkok
(Thailand)
TC 123/SC 7
Plain bearings/Special types of plain bearings
7-11
Osaka (Japan)
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
7-11
Beijing (China)
TC 223
Societal security
7-12
San Diego (USA)
JTC 1
Information technology
10
Gaithersburg
(USA)
TC 30/SC 7
Measurement of fluid flow in closed conduits/Volume methods including water meters
10
Sao Paulo
(Brazil)
TC 250
Project committee: Sustainability in event management
10-11
Washington, D.C
(USA)
TC 260
Human resource management
11
Venice (Italy)
TC 227
Springs
14
Tel Aviv (Israel)
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
14-18
Auckland (New
Zealand)
TC 217
Cosmetics
15-17
London (United
Kingdom)
TC 189
Ceramic tile
17
Munich
(Germany)
TC 44/SC 12
Welding and allied processes/Soldering materials
17-18
Pretoria (South
Africa)
TC 211
Geographic information/Geomatics
18
Johannesburg
(South Africa)
TC 229
Nanotechnologies
21-22
Berlin (Germany)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
22-23
Rome (Italy)
TC 34/SC 4
Food products/Cereals and pulses
22-25
Boulogne sur
Mer (France)
TC 234
Fisheries and aquaculture
23-24
Berlin (Germany)
TC 259
Project committee: Outsourcing
*
*
24
London (United
Kingdom)
TC 59/SC 2
Buildings and civil engineering works/Terminology and harmonization of languages
24
Stellenbosch
(South Africa)
TC 98/SC 2
Bases for design of structures/Reliability of structures
24
Stellenbosch
(South Africa)
TC 98/SC 3
Bases for design of structures/Loads, forces and other actions
25
Stellenbosch
(South Africa)
TC 98
Bases for design of structures
28-30
London (United
Kingdom)
TC 20
Aircraft and space vehicles
30
La Plaine StDenis (France)
*
TC 147/SC 3
Water quality/Radiological methods
Pau (France)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
(Jamaica)
**
TC 93
Starch (including derivatives and by-products)
**
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
December 2011
2
Linz (Austria)
2
Brussels
(Belgium)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
2
La Plaine StDenis (France)
TC 158
Analysis of gases
7-8
La Plaine StDenis (France)
TC 17/SC 3
Steel/Steels for structural purposes
12-16
Sydney
(Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machines
13-14
Heidelberg
(Germany)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
TC 257
General technical rules for determination of energy savings in renovation projects, industrial
enterprises and regions
TC 213
Dimensional and geometrical product specifications and verification
January 2012
11-12
Paris (France)
Charlotte (USA)
**
January-February 2012
30-4
Paris (France)
**
TC 236
Project Committee: Project Management
30-4
Paris (France)
*
TC 258
Project, programme and portfolio management
February 2012
13-14
Orlando (USA)
*
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
20-24
Guangzhou
(China)
*
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
20-24
Kyoto (Japan)
*
JTC 1/SC 35
Information technology/User interfaces
20-24
Paris (France)
**
TC 23/SC 2
Tractors and machinery for agriculture and forestry/Common tests
22-23
Geneva
(Switzerland)
*
TMB
Technical Management Board
Florida (USA)
**
TC 115
Pumps
February-March 2012
25-5
Toulouse
(France)
**
TC 34/SC 12
Food products/Sensory analysis
28-2
Berlin (Germany)
**
TC 107
Metallic and other inorganic coatings
March 2012
12-16
Milan (Italy)
*
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
29
Frankfurt
(Germany)
*
TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
(Australia)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
April 2012
15-20
(USA)
**
TC 110
Industrial trucks
15-20
(USA)
**
TC 110/SC 1
Industrial trucks/General terminology
15-20
(USA)
**
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
16
Berlin (Germany)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
16-20
Durban (South
Africa)
**
TC 135
Non-destructive testing
16-20
La Plaine StDenis (France)
*
TC 198
Sterilization of health care products
16-20
Melbourne
(Australia)
**
TC 204
Intelligent transport systems
17
Senlis (France)
**
TC 117
Fans
23-27
Nairobi (Kenya)
**
TC 34
Food products
25-26
Moscow
(Russian
Federation)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Pipeline transportation systems
Bern
(Switzerland)
**
TC 113
Hydrometry
Durban (South
Africa)
**
TC 135/SC 3
Non-destructive testing/Ultrasonic testing
Durban (South
Africa)
**
TC 135/SC 5
Non-destructive testing/Radiation methods
May 2012
7-11
Berlin (Germany)
**
TC 46
Information and documentation
7-11
Berlin (Germany)
**
TC 46/SC 4
Information and documentation/Technical interoperability
7-11
Berlin (Germany)
*
TC 46/SC 11
Information and documentation/Archives/records management
8
Chicago (USA)
**
TC 68/SC 7
Financial services/Core banking
8-10
Sydney
(Australia)
*
TC 145/SC 1
Graphical symbols/Public information symbols
10
Chicago (USA)
*
TC 68
Financial services
10-11
Tel Aviv (Israel)
**
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
14-15
Rio de Janeiro
(Brazil)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and production equipment
15-17
Buenos Aires
(Argentina)
*
TC 67/SC 5
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Casing, tubing and drill pipe
20-25
Jeju (Korea,
Republic of)
*
JTC 1/SC 7
Information technology/Software and systems engineering
20-25
Seoul (Korea,
Republic of)
**
TC 228
Tourism and related services
21-25
Berlin (Germany)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
22
Delft
(Netherlands)
**
TC 195
Building construction machinery and equipment
22
Delft
(Netherlands)
*
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
(Unknown)
**
TC 126
Tobacco and tobacco products
(Australia)
**
TC 145
Graphical symbols
June 2012
4-8
Paris (France)
**
TC 85
Nuclear energy, nuclear technologies, and radiological protection
6-7
Geneva
(Switzerland)
**
COPOLCO
Committee on consumer policy
11-12
Paris (France)
*
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
11-15
Buffalo (USA)
**
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock
measuring instruments
11-15
Kyoto (Japan)
*
TC 121
Anaesthetic and respiratory equipment
11-15
Kyoto (Japan)
**
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines
11-16
La Plaine StDenis (France)
*
TC 147
Water quality
13-14
Geneva
(Switzerland)
*
TMB
Technical Management Board
19-22
Vienna (Austria)
*
REMCO
Committee on reference materials
20-21
Milan (Italy)
**
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
24-29
Madrid (Spain)
*
TC 37
Terminology and other language and content resources
Orlando (USA)
**
TC 10
Technical product documentation
Brussels
(Belgium)
**
TC 34/SC 9
Food products/Microbiology
Calgary
(Canada)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
Brugge
(Belgium)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
(China)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
(Greece)
**
TC 92/SC 3
Fire safety/Fire threat to people and environment
(France)
**
TC 211
Geographic information/Geomatics
**
JTC 1/SC 35
Information technology/User interfaces
**
TC 142
Cleaning equipment for air and other gases
2nd Quarter 2012
August 2012
27-31
Montreal
(Canada)
September 2012
3-8
Zurich
(Switzerland)
19-21
San Diego (USA) **
GA
General Assembly
22
San Diego (USA) **
COUNCIL
Council
23-28
Rio de Janeiro
(Brazil)
**
TC 164
Mechanical testing of metals
23-28
Rio de Janeiro
(Brazil)
**
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
23-28
Rio de Janeiro
(Brazil)
**
TC 164/SC 3
Mechanical testing of metals/Hardness testing
23-28
Rio de Janeiro
(Brazil)
**
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
24-26
Sydney
(Australia)
*
TC 54
Essential oils
24-28
Stockholm
(Sweden)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
Zibo city (China)
**
TC 206
Fine ceramics
Cadiz (Spain)
**
TC 213
Dimensional and geometrical product specifications and verification
October 2012
1-2
Ottawa (Canada)
*
TC 34/SC 11
Food products/Animal and vegetable fats and oils
8-12
(Unknown)
**
TC 92
Fire safety
10-11
Berlin (Germany)
*
TC 167
Steel and aluminium structures
10-17
(China)
**
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
14-19
Tokyo (Japan)
*
TC 59/SC 14
Buildings and civil engineering works/Design life
15-19
Amsterdam
(Netherlands)
*
TC 146
Air quality
24
Sydney
(Australia)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
of gaseous fuels
(Unknown)
**
TC 92/SC 2
Fire safety/Fire containment
(Brazil)
**
TC 127
Earth-moving machinery
Tokyo (Japan)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Korea, Republic
of)
**
TC 23/SC 7
Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation
(USA)
**
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
systems
**
TC 211
Geographic information/Geomatics
(Europe)
**
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
(Korea, Republic
of)
**
TC 28
Petroleum products and lubricants
November 2012
4th Quarter 2012
(Saudi Arabia)
Month unknown 2012
Chicago (USA)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
Tokyo (Japan)
**
TC 69
Applications of statistical methods
(South Africa)
**
TC 102
Iron ore and direct reduced iron
Sydney
(Australia)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
Sydney
(Australia)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
**
TC 164/SC 2
Mechanical testing of metals/Ductility testing
(Finland)
**
TC 190
Soil quality
(China)
**
TC 202
Microbeam analysis
(France)
**
TC 205
Building environment design
(Thailand)
**
TC 207
Environmental management
**
JTC 1/SC 35
Information technology/User interfaces
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
Helsinki
(Finland)
**
TC 117
Fans
Paris (France)
**
TC 29/SC 5
Small tools/Grinding wheels and abrasives
September 2012
23-28
Rio de Janeiro
(Brazil)
Month unknown 2012
February-March 2013
25-1
(South America)
March 2013
(Kenya)
April 2013
10-11
May 2013
13-16
Chicago (USA)
**
TC 195
Building construction machinery and equipment
13-17
(Italy)
**
TC 29
Small tools
13-17
Guangzhou
(China)
*
TC 68
Financial services
27-31
Shanghai
(China)
**
TC 4
Rolling bearings
Ottawa (Canada)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
(China)
**
TC 10
Technical product documentation
Paris (France)
**
TC 46/SC 11
Information and documentation/Archives/records management
**
JTC 1/SC 35
Information technology/User interfaces
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
August 2013
26-30
(South America)
September 2013
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan)
**
TC 142
Cleaning equipment for air and other gases
**
TC 113
Hydrometry
(Australia)
**
REMCO
Committee on reference materials
(South Africa)
**
TC 37
Terminology and other language and content resources
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
(USA)
**
TC 69
Applications of statistical methods
(Korea, Republic
of)
**
TC 107
Metallic and other inorganic coatings
Porto de
Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
Amsterdam
(Netherlands)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
(Portugal)
**
TC 228
Tourism and related services
**
TC 46/SC 11
Information and documentation/Archives/records management
(USA)
**
REMCO
Committee on reference materials
(Brazil)
**
TC 28
Petroleum products and lubricants
(Germany)
**
TC 37
Terminology and other language and content resources
(USA)
**
TC 142
Cleaning equipment for air and other gases
(South Africa)
**
REMCO
Committee on reference materials
London (United
Kingdom)
**
TC 142
Cleaning equipment for air and other gases
October 2013
Mexico (Mexico)
Month unknown 2013
May 2014
Washington, D.C
(USA)
Month unknown 2014
Month unknown 2015