As of Sept. 13.2011
10th Congress in Japan
IGTC’11 Osaka
International Gas Turbine Congress 2011 Osaka
November 13(Sun) - 18(Fri)
Tentative Program
Session ID Number / Title
Date / Time
Room
Paper# / Paper Title
Corresponding Author / Family name Given name Affiliation
Authors/ Family name 1 Given name 1 Affiliation 1
/ Family name 2 Given name 2 Affiliation 2
AD(1) Aerodynamics of Axial Compressor I
Nov.15(Tuesday) 9:30-11:00
Conference Hall
#030
Detail Flow Field Investigation of an Axial Flow Compressor at Windmill Condition
Imaeda Motohiro
(IHI Corporation)
Imaeda Motohiro
(IHI Corporation)
Kato Dai
(IHI Corporation)
Ohta Yutaka
(Waseda University)
Totani Goh
(Waseda University)
Outa Eisuke
(Waseda University)
1
#064
Three-Dimensional Numerical Simulation on Flow Field and Casing Optimization of an Eleven-stage Axial Compressor
Zhao Lianhui
(Shanghai Electric Power Generation Group)
Zhao Lianhui
(Shanghai Electric Power Generation Group)
He Lei
(Shanghai Electric Power Generation Group)
Cui Yaoxin
(Shanghai Electric Power Generation Equipment CO., LTD. )
Hu Yu
(Shanghai Electric Power Generation Equipment CO., LTD. )
Xu Qiang
(Shanghai Electric Power Generation Group)
#055
Multi-Objective Optimization of Three-Dimensional Blade Shape for an Axial Compressor Rotor in Transonic Stage
Chihiro Myoren
(Hitachi, Ltd.)
Chihiro Myoren
(Hitachi, Ltd. Energy and Environmental Systems Laboratory)
Yasuo Takahashi
(Hitachi, Ltd. Energy and Environmental Systems Laboratory)
Yasuhiro Kato
(Hitachi, Ltd. Energy and Environmental Systems Laboratory)
AD(2) Aerodynamics of Axial Compressor II
Nov.15(Tuesday) 11:20-12:50
Conference Hall
#056
Effects of Tip Leakage Vortex Breakdown on Unsteady Flow Fields at Near-Stall Condition in a Low-Speed Axial Flow Compressor Rotor with Large Tip
Clearance
Yamada Kazutoyo
(Kyushu University)
Yamada Kazutoyo
(Kyushu University
Hiroaki Kikuta
(Kyushu University)
Masato Furukawa
(Kyushu University)
Satoshi Gunjishima
(Kyushu University)
#046
Span-wise Mixing Prediction by Unsteady Multistage Simulation for a Transonic Axial Compressor
Yamagami Mai
(IHI corporation)
Yamagami Mai
(IHI corporation)
Kodama Hidekazu
(IHI corporation)
Tsuchiya Naoki
(IHI corporation)
Kazawa JunichiJ
(axa)
#136
Development of a Highly Loaded Axial Flow Compressor for Small Core Size Aircraft Engines
Kato Dai
(IHI Corporation)
2
Kato Dai
Pallot Guillaume
Sato Daisuke
Yamagami Mai
Kodama Hidekazu
(IHI Corporation)
(IHI Corporation)
(IHI Corporation )
(IHI Corporation)
(IHI Corporation)
AD(3) Aerodynamics of Axial Compressor III
Nov.16(Wednesday) 9:30-11:00
Conference Hall
#044
Direct Integration Method in Flutter Analysis of IV Standard Configuration Cascade)
Rzadkowski Romuald
(The Szewalski Institute of Fluid Flow Machinery, Polish Academy of Sciences, G dansk)
Rzadkowski Romuald
(The Szewalski Institute of Fluid Flow Machinery)
Kubitz Leszek
(Polish Naval Academy)
#050
Unsteady Forces Acting on Rotor Blades in Five and Half Compressor Stage
Rzadkowski Romuald
(The Szewalski Institute of Fluid Flow Machinery)
Rzadkowski Romuald
(The Szewalski Institute of Fluid Flow Machinery)
Gnesin Vitaly
(Institute of Mechanical Engineering Problems, National Academy of Sciences of Ukraine)
Kolodyazhnaya Luba (Institute of Mechanical Engineering Problems, National Academy of Sciences of Ukraine)
#106
Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental Results
Lietmeyer Christoph
(Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi ty of Hannover)
Lietmeyer Christoph
(Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi ty of Hannover)
Seume Joerg R.
(Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi ty of Hannover)
AD(4) Aerodynamics of Axial Compressor IV
Nov.16(Wednesday) 11:20-12:50
Conference Hall
#0220 Streamwise Evolution of Loss in a Shrouded Axial Compressor Cascade
Kim Jin Wook
(Seoul National University)
Kim Jin Wook
(Seoul National University)
Kim Tongbeum
(University of the Witwatersrand)
Song Seung Jin
(Seoul National University)
3
#108
An Integrated Total Pressure and Total Temperature Probe for Local Entropy Measurement
Wang Yongsheng
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
Wang Yongsheng
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
Lin Feng
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
AD(5) Aerodynamics of Radial Compressor I
Nov.17(Thursday) 9:30-11:00
Conference Hall
#035
Waveguide Pressure Measuring System and Surge Analysis in a Two-stage High Speed Centrifugal Compressor
Gao Chuang
(Shanghai Advanced Research Institute, Chinese Academy of Science s)
Gao Chuang
(Shanghai Advanced Research Institute, Chinese Academy of Science s)
Huang Weiguang
#040
Effects of Impeller-Diffuser Radial Gap on Unsteady Flow Fields in a Centrifugal Compressor with Vaned Diffuser
Goto Takashi
(Waseda Univeristy)
Goto Takashi
(Waseda University)
Ohta Yutaka
(Waseda University)
Outa Eisuke
(Waseda University)
#160
Characteristics of Rotating Stall in a Centrifugal Compressor with a Vaneless Diffuser
Kyung Jun Kang
(Korea Atomic Energy Reasearch Institute, Researcher)
Kyung Jun Kang
(Researcher)
AD(6) Aerodynamics of Radial Compressor II
Nov.17(Thursday) 11:20-12:50
Conference Hall
#165
Design Optimization of Low Solidity Vaned Diffusers for Centrifugal Compressors Using a Multi-objective Genetic Algorithm
Shibata Takanori
(Hitachi, Ltd.)
Shibata Takanori
(Hitachi, Ltd.)
Yagi
Manabu
(Hitachi, Ltd.)
Nishida Hideo
(Hitachi Plant Technologies, Ltd.)
Kobayashi Hiromi
(Hitachi Plant Technologies, Ltd.)
4
Tanaka Masanori
(Hitachi Plant Technologies, Ltd.)
#174
Numerical Optimization Design of the Centrifugal Compressor Scroll Volute Coupled with Impeller and Vaneless Diffuser
Yuan Xin
(Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Tsinghua University)
Qi Shibo
(Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Tsinghua University)
#252
Impeller Design for Centrifugal Compressor
Amano Ryo
(University of Wisconsin-Milwaukee)
Amano Ryo
(UWM)
Xu Cheng
(UWM)
AD(7) Aerodynamics of Turbine I
Nov.14(Monday) 11:40-13:10
Room1202
#020
Regina
Regina
Basol
Jenny
Kalfas
Abhari
Hot Streak Shaping and Migration in an Axial Turbine
Kai
(Swiss Federal Institute of Technology)
Kai
(Swiss Federal Institute of Technology )
Altug
(Swiss Federal Institute of Technology )
Philipp
(Swiss Federal Institute of Technology)
Anestis I.
(Swiss Federal Institute of Technology)
Reza S.
(Swiss Federal Institute of Technology)
#194
Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-Turbine
Herbst Florian
(Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover)
Herbst Florian
(Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover)
Fakiolas Efstratios
(Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover)
Bluemel Sven
(Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover)
Seume Joerg
(Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover)
#162
Validation and Development of Models for Optimum Wheel Flow Angles at In- and Outlet of Small Size Radial Turbines
Suhrmann Jan-Friedrich (TU-Berlin)
Suhrmann Jan-Friedrich (TU-Berlin)
Peitsch Dieter
(TU-Berlin)
Gugau Marc
(BorgWarner Turbo Systems Engineering GmbH)
5
Heuer Tom
Tomm Uwe
(BorgWarner Turbo Systems Engineering GmbH)
(BorgWarner Turbo Systems Engineering GmbH)
AD(8) Aerodynamics of Turbine II
Nov.14(Monday) 14:30-16:00
Room1202
#007
Integrated Environment for Gas Turbine Design
Grebennik Kirill
(SoftinWay Inc).
Leonid Moroz
(SoftInWay Inc.)
Pagur Petr
(SoftInWay Inc)
#063
Studies on the Flow Fields around Two Types of LPT Cascade with Different Loading Designs: Midspan and Secondary Loss
Funazaki Ken-ichi
(Iwate University)
Funazaki Ken-ichi
(Iwate University)
Okamura Kazuki
(Iwate University)
Sato Yasukuni
(Iwate University)
Hamabe Masaaki
(IHI)
#076
Improving Performance of a High Work Turbine Using Non-Axisymmetric Endwall
Miyoshi Ichiro
(Hitachi, Ltd)
Miyoshi Ichiro
(Hitachi, Ltd)
Shin’ichi Higuchi
(Hitachi, Ltd)
AD(9) Aerodynamics of Turbine III
Nov.14(Monday) 16:20-17:50
Room1202
#125
Development of an Unsteady Multi-species Transonic Flow Numerical Method for Internal Flows in the Turbine
Yuan Xin
(Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University)
Wang Zhong Nan
(Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University)
Lin Zhi Rong
(Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University)
Yuan Xin
(Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University)
#113
Optimization of Secondary Flow Loss Reduction of High Loaded Gas Turbine Cascade
6
Tamagawa Toru
Tamagawa Toru
Kawata Yutaka
Oto Masao
Fuzimoto Daichi
(Osaka Institute of Technology)
(Osaka Institute of Technology)
(Osaka Institute of Technology)
(Osaka Institute of Technology)
(Osaka Institute of Technology)
#117
Effects of Rotor Tip Leakage on the Unsteady Flow Fields of Stator Blade in a One and Half Turbine Stages
Li Jun
(Xi'an Jiaotong University)
Li Jun
(Xi'an Jiaotong University)
Yan Xin
(Xi'an Jiaotong University)
Kong Shengru
(Xi'an Jiaotong University)
Song Liming
(Xi'an Jiaotong University)
Feng Zhenping
(Xi'an Jiaotong University)
AD(10) Aerodynamics of Turbine IV
Nov.15(Tuesday) 9:30-11:00
Room1202
#175
Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions
Adamczuk Rafael
(University of Hannover)
Adamczuk Rafael
(University of Hannover)
Seume J$(D+Srg
(University of Hannover)
#215
Aero and Aero-thermal Characteristics of Turbine Rotor Blade’s Platforms
Sakamoto Yasuro
(Mitsubishi Heavy Industries, Ltd)
Sakamoto Yasuro
(Mitsubishi Heavy Industries, Ltd)
Ito Eisaku
(Mitsubishi Heavy Industries, Ltd)
Nakamura Takeshi
(Mitsubishi Heavy Industries, Ltd)
#248
Two- and Three-dimensional Numerical Analysis on Stator-Rotor Interactions in a Supersonic Turbine
Kai Takeshi
(Tokyo University)
Kai Takeshi
(Tokyo University)
Okamoto Koji
(Tokyo University)
Teramoto Susumu
(Tokyo University)
7
AD(11) Aerodynamics of Turbine V
Nov.15(Tuesday) 11:20-12:50
Room1202
#254
Transition Mechanisms in Laminar Separated Flow under Unsteady Main Flow Conditions - Part I: Steady Flowfield
Lyko Christoph
(Technical University of Berlin, Institute for Aeronautics and As tronautics)
Lyko Christoph
(Technical University of Berlin)
Daehnert Jerrit
(Technical University of Berlin)
Peitsch Dieter
(Technical University of Berlin)
#255
Transition Mechanisms in Laminar Separated Flow under Unsteady Main Flow Conditions - Part II: Unsteady Flowfield
Lyko Christoph
(Technical University of Berlin, Institute for Aeronautics and As tronautics)
Lyko Christoph
(Technical University of Berlin)
Daehnert Jerrit
(Technical University of Berlin)
Peitsch Dieter
(Technical University of Berlin)
#152
Secondary Flows and Coolant Film Interaction of High Subsonic Cascade
Mahadevan Srikrishna (Center for Advanced Turbines and Energy Research, Laboratory for Turbine Aerodynamics, Heat Transfer, and Durability, University of
Central Florida)
Mahadevan Srikrishna (CATER/FCAAP, University of Central Florida)
Golsen Matthew
(CATER/FCAAP, University of Central Florida )
Casey Tim
(CATER/FCAAP, University of Central Florida)
Ricklick Mark A.
(CATER/FCAAP, University of Central Florida)
Kapat JayantaS
(CATER/FCAAP, University of Central Florida)
AD(12) Computational Fluid Dynamics I
Nov.16(Wednesday) 9:30-11:00
Room1202
#072
Speeding up the CFD Process
Favaretto CF
(Cambridge Flow Solutions Ltd)
Favaretto C.F.
(Cambridge Flow Solutions Ltd)
Dawes W.N
.
(Cambridge University Engineering Department
Kellar W.P.
(Cambridge Flow Solutions Ltd)
8
#114
Numerical Investigations on the Leakage Flow Characteristics of Different Honeycomb Seal Configurations
Li Jun
(Xi'an Jiaotong University)
Li Jun
(Xi'an Jiaotong University)
Li Shaojun
(Xi'an Jiaotong University)
Yan Xin
(Xi'an Jiaotong University)
Song Liming
(Xi'an Jiaotong University)
Feng Zhenping
(Xi'an Jiaotong University)
#221
Modeling for Prediction of Very Short Ejector Performance
Im Ju Hyun
(Seoul National University)
Im Ju Hyun
(Seoul National University)
Song Seung Jin
(Seoul National University)
AD(13) Computational Fluid Dynamics II
Nov.16(Wednesday) 11:20-12:50
Room1202
#205
Numerical Simulation of a Mixed Flow Compressor at Windmill
Noji Yuya
(Waseda University)
Noji Yuya
(Waseda University)
Ogawa Masamichi
(Waseda University
Sato Tetsuya
(Waseda University)
Masaki Daisaku
(Japan Aerospace Exploration Agency)
Taguchi Hideyuki
(Japan Aerospace Exploration Agency)
#239
CFD Analysis of a Variable Nozzle Turbine for Automotive Turbocharger Considering Actual Geometries
Yamagata Akihiro
(IHI Corporation)
Yamagata Akihiro
(IHI Corporation)
GS: Aerodynamics (AD)
#241
Numerical Simulation of Icing Phenomena in Fan Rotor/Stator Interaction Field
Hayashi Ryousuke
(Tokyo University of Science, Graduate School of Mechanical Engineering)
Hayashi Ryousuke
(Tokyo University of Science, Graduate School of mechanical Engineering)
Kawakami Kei
(Tokyo University of Science, Graduate School of Mechanical Engineering
9
Suzuki Masaya
Yamamoto Makoto
(Tokyo Unoversity of Science)
(Tokyo University of Science)
AD(14) Aerodynamic Design
Nov.17(ThuRsday) 9:30-11:00
Room1202
#135
Wide Chord Study in Turbo Machinery (The First Report)
Satoshi Ohtsuki
(HORIBA,Ltd).
Satoshi Ohtsuki
‘
(HORIBA,Ltd).
#201
Investigation on Diffuser Design in Tesla Compression Device
Wang Baotong
(The University of Tokyo)
Wang Baotong
(Department of Advanced Energy, Graduate School of Frontier Science, The University of Tokyo)
Okamoto Koji
(Department of Advanced Energy, Graduate School of Frontier Science, The University of Tokyo)
Teramoto Susumu
(Department of Aeronautics and Astronautics, School of Engineering, The University of Tokyo)
#127
Design and Numerical Investigation of High-Through-Flow Transonic Fans with Swept and Straight Blade
Gui XingMin
(Beijing University of Aeronautics and Astronautics)
Fang Zhu
(Buaa)
Dong Hai
(Jin Buaa)
XingMin Gui
(Buaa)
CB(1) Fuel
Nov.15(Tuesday) 11:20-12:50
Room1008
#013
Alternative Fuels for Aviation Gas Turbine Engines: Operating Properties and Transport Efficiency of Aircrafts
Yanovskiy Leonid
(Central Institute of Aviation Motors)
Yanovskiy Leonid
(Central Institute of Aviation Motors)
Raznovschikov Vladimir (Central Institute of Aviation Motors)
#092
Development of Biogas Combustor for a Small Size Industrial Gas Turbine
Chun Jaechul
(Doosan Heavy Industries & Construction Co., Ltd)
Chun Jaechul
(Doosan Heavy Industries & Construction Co., Ltd)
10
Kim Ho Keun
Im Ji-Hyuk
An Yunho
Choe Jinhoon
(Doosan Heavy Industries & Construction Co., Ltd)
(Doosan Heavy Industries & Construction Co., Ltd)
(Doosan Heavy Industries & Construction Co., Ltd)
(Doosan Heavy Industries & Construction Co., Ltd)
#171
Biodiesel and its Blends with Kerosene as an Alternative Fuel in Low NOx Gas Turbine Combustor
Altaher Mohamed
(Leeds University)
Altaher Mohamed
(Leeds University)
Li Hu
(Leeds University)
Andrews Gordon
(Leeds University)
CB(2) Emission I
Nov.16(Wednesday) 9:30-11:00
Room1008
#038
An Emissions Model for NOx and CO Emission Trends from Industrial Gas Turbines
Samaras Christos
(Cranfield University, Aristotle University Of Thessaloniki)
Samaras Christos
(Cranfield University, Aristotle University Of Thessaloniki)
Di Lorenzo Giuseppina (Cranfield University)
Kalfas Anestis
(Aristotle University Of Thessaloniki)
Pilidis Pericles
(Cranfield University)
#142
Effects of Pressure on Prompt NOX Formation Characteristics in Premixed Flame
Hayashi Jun
(Osaka University)
Hayashi Jun
(Osaka University)
Nakatsuka Noriaki
(Osaka University)
Shiga Yuuichi
(Osaka University)
Hiroyuki Kashihara
(Kawasaki Heavy Industry)
Akamatsu Fumiteru
(Osaka University)
#232
Simple Low NOx Combustor Technology for Environmentally Compatible Engine （ECO Engine)
Tomohiro Ide
(IHI Corporation)
Ide Tomohiro
(IHI Corporation)
Hiromitsu Nagayoshi
(HI Corporation)
Hosoi Jun
(IHI Corporation )
11
GS: Combustion (CB)
CB(3) Emission II
Nov.16(Wednesday) 11:20-12:50
Room1008
#101
Effect of Wall Fuel Injection Configuration on Emissions Using Low NOx Radial Swirl Combustor
Altaher Mohamed
(Leeds University)
Altaher Mohamed
(Leeds University)
Andrews Gordon
(Leeds University)
Li Hu
(Leeds University)
#237
Dependence of Soot Yield on Pressure of Gaseous Fuels in Diffusion Flames
Gulder Omer
(University of Toronto, Institute for Aerospace Studies)
Gulder Omer
(University of Toronto)
Intasopa Gorngrit
(University of Toronto)
Vaillancourt Marie
(University of Toronto)
Mandatori Paul
(University of Toronto)
Joo Hyun
(University of Toronto)
#084
Numerical Prediction of NOx in Gasturbine Combustor
Matsuya Kyohei
(Hokkaido University)
YAMAMOTO Tomonori (Hokkaido University)
NISHIDA Shingo
(Hokkaido University)
Oshima Nobuyuki
(Hokkaido University)
NONAKA Yoshiharu
(Kawasaki Heavy Industries,Ltd)
HIRANO Kohshi_Kawasaki Heavy Industries,Ltd
CB(4) Combustion Phenomena I
Nov.17(Thursday) 9:30-11:00
Room1008
#043
Effect of Ambient Pressure on Spray Jet Flame Behavior
Kurose Ryoichi
(Kyoto University)
Kitano Tomoaki
(Kyoto University)
12
Nakatani Tomoaki
Kurose Ryoichi
Kurose Ryoichi
(Kyoto University)
(Kyoto University)
(Kyoto University)
#059
Investigation of Spray Combustion Field with Swirl Flow in a Lab-Scale Aircraft Gas Turbine Combustor in a Lab-Scale Aircraft Gas Turbine Combustor
Tainaka Kazuki
(Osaka University)
Tainaka Kazuki
(Osaka University)
Hayashi Jun
(Osaka University)
Moriai Hideki
(Mitsubishi Heavy Industries, Ltd.)
Nakatsuka Noriaki
(Osaka University)
Akamatsu Fumiteru
(Osaka University)
#129
Detailed Laser-based Investigation of a Laboratory Scale Liquid Fuel Burner
Zimmer Laurent
(EM2C Laboratory, CNRS-Ecole Centrale Paris)
Zimmer Laurent
(EM2C)
Providakis Theodore
(EM2C)
Scouflaire Philippe
(EM2C)
Ducruix Sebastien
(EM2C)
CB(5) Combustion Phenomena II
Nov.17(Thursday) 11:20-12:50
Room1008
#209
An Experimental Study on the Flashback Phenomena of Premixed Combustors using Swirling Flow
Ogawa Yohei
(Osaka University)
Ogawa Yohei
(Osaka University)
Masaharu Komiyama
(Osaka University)
Kenichiro Takeishi
(Osaka University)
#235
Effects of Combustor Exit Area on Combustion Characteristics of a Propane-fueled Annular Combustor for a Several Hundred W-class Micro Gas Turbine
Sakurai Takashi
(Tokyo Metropolitan University)
Sakurai Takashi
(Tokyo Metropolitan University)
Yuasa Saburo
(Tokyo Metropolitan University)
Haga Makoto
(Tokyo Metropolitan University)
Abe Hiroshi
(Tokyo Metropolitan University)
13
#224
PIV Measurement in Gas Turbine Combustor Model
Yarita Yoshihiro
(Gunma University)
Yarita Yoshihiro
(Gunma University)
Endo Yuto
(Gunma University)
Ide Tomohiro
(IHI Coporation)
Hiromitsu Nagayoshi
(IHI Coporation)
Kawashima Hisanobu (Gunma University)
CB（6）
Development of Combustor I
Nov.14(Monday) 11:40-13:10
Room1007
#068
Investigations of a Staged Fuel Nozzle for Aeroengines by Single-Sector and Multi-Sector Combustor Tests
Yamamoto Takeshi
(Japan Aerospace Exploration Agency)
Yamamoto Takeshi
(JAXA)
Shimodaira Kazuo
(JAXA)
Kurosawa Yoji
(JAXA)
Matsuura Kazuaki
(JAXA)
Yoshida Seiji
(JAXA)
#179
Design and Verification Test Result of Air Cooled Combustor for Mitsubishi G Class Gas Turbine
Sato Kenji
(Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.)
Tsukagoshi Keizo
(Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.)
Tanaka Katsunori
(Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.)
Nishida Koichi
(Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.)
Akamatsu Shinji
(Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.)
Sato Kenji
(Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.)
#182
Single NOx DLE Combustion System for KAWASAKI M7A-03 Green Gas Turbine
Matsumoto Kiyoshi
(Kawasaki Heavy Industries, LTD.)
Matsumoto Kiyoshi
(KHI)
Oda Takeo
(KHI)
Toyota Satoshi
(KHI)
Ogata Masahiro
(KHI)
14
Kinoshita Yasuhiro
(KHI)
CB（7）
Development of Combustor II
Nov.14(Monday) 14:30-16:00
Room1007
#217
Development of Combustor with Exhaust Gas Recirculation System
Takiguchi Satoshi
(Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.)
Takiguchi Satoshi
(Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.)
Saitoh Keijiro
(Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.)
Ito Eisaku
(Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.)
Nishida Koichi Takasago( MachineryWorks, Mitsubishi Heavy Industries, Ltd.)
Tanaka Katsunori
(Takasago MachineryWorks, Mitsubishi Heavy Industries, Ltd.)
#236
Development and Preliminary Performance Evaluation of a Multi Swirl Airblast Burner with Multi Fuel-Film Annuli
Matsuura Kazuaki
(Japan Aerospace Exploration Agency)
Suzuki Takashi
(Waseda University)
Yoshiura Yasutaro
(Hosei University)
Ishikawa Tomoki
(Hosei University)
Matsuura Kazuaki
(Japan Aerospace Exploration Agency)
Iino Jun
(Japan Aerospace Exploration Agency)
#184
Development of a Lean Staged Combustor in ECO Engine Project
Matsuyama Ryusuke
(Kawasaki Heavy Industries, Ltd.)
Matsuyama Ryusuke
(Kawasaki Heavy Industries, Ltd.)
Kobayashi Masayoshi
(Kawasaki Heavy Industries, Ltd. )
Ogata Hideki
(Kawasaki Heavy Industries, Ltd.)
Horikawa Atsushi
(Kawasaki Heavy Industries, Ltd.)
Kinoshita Yasuhiro
(Kawasaki Heavy Industries, Ltd.)
#187
Improvement on Light around Characteristics of a Lean Staged Fuel Spray Nozzle (The Second Report)
Kobayashi Masayoshi
(Kawasaki Heavy Industries,Ltd.)
Kobayashi Masayoshi
(Kawasaki Heavy Industries,Ltd.)
Matsuyama Ryusuke
(Kawasaki Heavy Industries,Ltd )
Horikawa Atsushi
(Kawasaki Heavy Industries,Ltd )
15
Fujiwara Hitoshi
(JAXA)
CB(8) Atomization and Ignition
Nov.14(Monday) 16:20-17:50
Room1007
#081
Atomization of Liquid Jet by Surrounding Fast Gas Stream
Inoue Chihiro
(University of Tokyo)
Inoue Chihiro
(University of Tokyo)
Watanabe Toshinori
(University of Tokyo)
Himeno Takehiro
(University of Tokyo)
Koishi Akifumi
(Faculty of Engineering, University of Tokyo)
Uzawa Seiji
(University of Tokyo)
#145
Study of Laser Induced Ignition for Combustible Mixtures with Pico-Second Pulse Duration Laser
Hayashi Jun
(Osaka University)
Hayashi Jun
(Osaka Univ.)
Furui Kenji
(Osaka Univ.)
Okada Tomoki
(Osaka Univ.)
Nakatsuka Noriaki
(Osaka Univ.)
Akamatsu Fumiteru
(Osaka Univ.)
#223
Ignition Characteristics in Transient Spray by Laser-Induced Plasma
Kawahara Nobuyuki
(Okayama University)
Kawahara Nobuyuki
(Okayama Univ.)
Tomita Eiji
(Okayama Univ.)
Nakamura Shinya
(Okayama Univ.)
CB(9) Numerical Simulation of Combustion I
Nov.15(Tuesday) 11:20-12:50
Room1007
#027
A Coupled Combustion CFD Analysis of an Aircraft Gas Turbine Combustion Chamber Complete with Effusion Cooling Holes
Murata Kouji
(Honda R&D Co., Ltd. Aircraft Engine R&D Center)
Murata Kouji
(Honda R&D Co., Ltd. Aircraft Engine R&D Center)
16
Shibata Ryosuke
Yadomaru Go
(Honda R&D Co., Ltd. Aircraft Engine R&D Center)
(Honda R&D Co., Ltd. Aircraft Engine R&D Center)
#066
Large-Eddy Simulation of a Spray Combustion Field in a Scaled Sector Model for a Jet Engine Combustor
Moriai Hideki
(Mitsubishi Heavy Industries, Ltd.)
Moriai Hideki
(MHI, Kyoto University)
Kurose Ryoichi
(Kyoto University)
Komori Satoru
(Kyoto University)
Amatsu Fumiteru
(Osaka University)
#134
Numerical Study of Syngas Premixed Flame Structure
Yousefian Najafabadi Sajjad (MAPNA Turbine Engineering & Manufacturing Company (TUGA))
Yousefian Najafabadi Sajjad (MAPNA Turbine Engineering & Manufacturing Company (TUGA))
Ghafourian Akbar
(Sharif University of Technology)
Darbandi Masoud
(Sharif University of Technology)
CB(10) Numerical Simulation of Combustion II
Nov.16(Wednesday) 9:30-11:00
Room1007
#071
Numerical Investigation of Air-Blasted Liquid Sheet Dynamics
Koizumi Kazuya
(Graduate School of Keio University)
Koizumi Kazuya
(Graduate School of Keio University)
Matsuo Akiko
(Keio University )
Horikawa Atsushi
(Kawasaki Heavy Industries, Ltd.)
Nonaka Yoshiharu
(Kawasaki Heavy Industries, Ltd)
#256
Assisting Clean Engine Design with Accurate Simulation of Real Fuel Behavior in Gas Turbine Combustors
Drennan Scott
(Reaction Design)
Drennan Scott
(Reaction Design)
DO(1) Development and Operation I
Nov.16(Wednesday) 11:20-12:50
Room1007
17
#005
Outline of conversion to Gas Turbine Combined Cycle system at Mizushima Thermal Power Station #1
Kim Kyoichi
(The Chugoku Electric Power Co.,Inc.)
Nakanishi Kyoichi
(The Chugoku Electric Power Co.,Inc.)
Ogawa Hisanobu
(The Chugoku Electric Power Co.,Inc.)
Ashitani Shigeru
(The Chugoku Electric Power Co.,Inc.)
#021
The Work of Replacement for the Higher Efficiency Gas Turbine
Yoshigai Hideki
(Kyushu electric power co.,inc.)
Yoshigai Hideki
(Thermal power department)
Shiga Eiichi
(Thermal power department)
Kamimasu Masanori
(Thermal power department)
#067
Application of Advanced Gas Turbine on Replacement of Sendai Thermal Power Station Unit No.4
Esashi Kei
(Tohoku Electric Power Co.,Inc)
Esashi Kei
(Tohoku Electric Power Co.,Inc)
Sato Koji
(Tohoku Electric Power Co.,Inc)
Ando Ikuo
(Tohoku Electric Power Co.,Inc)
Fujita Norio
(Tohoku Electric Power Co.,Inc) .
DO(2) Development and Operation II
Nov.17(Thursday) 9:30-11:00
Room1007
#051
Deveopment of 1.7MW Class High Efficiency Gas Turbine M1A-17
Yamasaki Yoshihiro
(Kawasaki Heavy Industries, LTD.)
Hosokawa Yasufumi
(Kawasaki Heavy Industries, LTD.)
Gouda Makoto
(Kawasaki Heavy Industries, LTD.)
Yamasaki Yoshihiro
(Kawasaki Heavy Industries, LTD)
Norimoto Atsushi
(Kawasaki Heavy Industries, LTD)
#025
MAN’s New Gas Turbine in the 6 MW-Class
Wiedermann Alexander (MAN Diesel and Turbo SE)
Wiedermann Alexander (MAN Diesel and Turbo)
Beukenberg Markus
(MAN Diesel and Turbo)
Orth Ulrich
(MAN Diesel and Turbo)
18
Aschenbruck Emil
Reiss Frank
(MAN Diesel and Turbo)
(MAN Diesel and Turbo)
#094
Development of 5MW Gas Turbine for 60Hz
Nam Samsik
(Doosan Heavy Industries & Construction, Co., Ltd.),
Nam Samsik
(Doosan Heavy Industries & Construction, Co., Ltd.)
Park Juncheol
(Doosan Heavy Industries & Construction.Co., Ltd)
Song Juyoung
(Doosan Heavy Industries & Construction, Co., Ltd)
Lee Kihoon
(Doosan Heavy Industries & Construction, Co., Ltd.)
Kim Sunghyun
(Doosan Heavy Industries & Construction.Co., Ltd.)
DO(3) Development and Operation III
Nov.17(Thursday) 11:20-12:50
Room1007
#214
Oil Scavenging CFD Simulations and Experiments in the Accessory Gearbox of an Aircraft Engine
Arisawa Hidenori
(Kawasaki Heavy Industries, LTD.)
Arisawa Hidenori
(Kawasaki Heavy Industries, LTD.)
Nishimura Motohiko
(Kawasaki Heavy Industries, LTD.)
Tanaka Kenichiro
(Kawasaki Heavy Industries, LTD.)
Imai Hideyuki
(Kawasaki Heavy Industries, LTD.)
Goi Tatsuhiko
(Kawasaki Heavy Industries, LTD.)
#189
Evolution and Future Trend of Large Frame Gas Turbine
Hada Satoshi
(Mitsubishi Heavy Industries,LTD.)
Hada Satoshi
(Acting Manager )
Masada Junichiro
(Deputy General Manager)
Ito Eisaku
(Research Engineering Manager)
Tsukagoshi Keizo
(Chief Engineer)
#197
Progress in Technology Development for the Next Generation High Temperature Gas Turbine
Ito Eisaku
(Mitsubishi Heavy Industries,Ltd.)
Ito Eisaku
(Mitsubishi Heavy Industries,Ltd.)
Tsukagoshi keizo
(Mitsubishi Heavy Industries,Ltd.)
Masada Junichiro
(Mitsubishi Heavy Industries,Ltd.)
19
Okada Ikuo
Sakamoto Yasuro
(Mitsubishi Heavy Industries,Ltd.)
(Mitsubishi Heavy Industries,Ltd.)
HT(1) Conjugate Heat Transfer
Nov.14(Monday) 11:40-13:10
Room1009
#086
Conjugate Calculation of a Film Cooled Blade for Improvement of the Leading Edge Cooling Configuration
Moritz Norbert
(B&B-AGEMA)
Moritz Norbert
(B&B-AGEMA)
Kusterer Karsten
(B&B-AGEMA)
Bohn Dieter
(RWTH Aachen University)
Sugimoto Takao
(KHI)
Tanaka Ryozo
(KHI)
#164
Conjugate Heat Transfer Simulation of an Inlet Guide Vane with Closed-Loop Steam Cooling
Zhang Chao
(Institute of Engineering Thermophysis, Chinese Academy of Sciences)
Zhang Chao
(Institute of Engineering Thermophysis, Chinese Academy of Sciences)
Hu Jie
(Liu)
Jianjun
#204
Conjugate Heat Transfer Simulation of Cooled Turbine Vanes Using Unstructured-Mesh CFD Solver
Sasaki Daisuke
(Tohoku University)
Sasaki Daisuke
(Tohoku University)
Yoshiara Tetsuya
(Tohoku University)
Yasuda Shunpei
(Tohoku University)
Nakahashi Kazuhiro
(Tohoku University)
#001
Numerical Validation of Conjugate Heat Transfer on a Transonic Turbine Cascade and its PSE Analysis
Mao Ronghai
(Alstom (Switzerland))
Yan P
(Harbin Institute of Technology)
Mao R
(Alstom)
Zhou C
(Harbin Institute of Technology)
Feng G
(Harbin Institute of Technology)
20
HT(2) Numerical Simulation of Heat Transfer I
Nov.14(Monday) 14:30-16:00
Room1009
#096
Thermal Analysis of the First Stage Gas Turbine Blade using the Combustion Simulation
Cho Hyung Hee
(Yonsei University)
Park Jun Su
(Yonsei Universtiy)
Lee Dong Myung
(Yonsei Universtiy)
Jung Eui Yeop
(Yonsei Universtiy)
Kim Beom Soo
(Korea Electric Power Research Institute)
Cho Hyung Hee
(Yonsei Universtiy)
#198
Benchmark Simulation of RANS CFD for Heat Transfer Evaluation on the VKI LS89 Blade
Takahashi Toshihiko
(Central Research Institute of Electric Power Industry)
Takahashi Toshihiko
(Central Research Institute of Electric Power Industry)
Arts Tony
(von Karman Institute for Fluid Dynamics)
Verstraete Tom
(von Karman Institute for Fluid Dynamics)
Prinsier Johan
(von Karman Institute for Fluid Dynamics)
#017
Computations of Flow and Heat Transfer in a Rotor-Stator System with Externally-induced Ingestion
Wilson Mike
(University of Bath)
Wang Le
(University of Bath)
Wilson Mike
University of Bath
Tham Kok-Mun
(Siemens Energy, Inc.)
HT(3) Numerical Simulation of Heat Transfer II
Nov.14(Monday) 16:20-17:50
Room1009
#016
Numerical Investigations of the Effect of Vortex Structures on Local Heat Transfer in a Large Scale Turbine Cascade
Dishur Rebecca
(TU Kaiserslautern)
Dishur Rebecca
(TU Kaiserslautern)
B・hle Martin
(TU Kaiserslautern)
Wiedermann Alexander (MAN Diesel & Turbo SE)
Takeishi Kenichiro
(Osaka University)
21
#060
A High-Order LES Approach to study the Redistribution of the Inlet Temperature Distortion in a Turbine
Biswas Debasish
(Toshiba Corporation)
Biswas Debasish
(Toshiba Corporation)
Jimbo tomohiko
(Toshiba Corporation)
#141
CFD Predictions of the Aerodynamics and Heat Transfer from Arrays of Impinging Jets with Crossflow
Andrews Gordon
(University of Leeds)
Andrews Gordon E
(University of Leeds)
Wang J.
(University of Leeds)
Abdul Hussain R.A.A.
(University of Leeds)
HT(4) Heat Transfer Measurement
Nov.15(Tuesday) 9:30-11:00
Room1009
#019
The Validation between the Measurement and the Calculational Analysis for the Surface Temperature of High-temperature Turbine Blades in a Gas Turbine
Xiao Dongming
Wen Xueyou
Zhang Lichao
Gu Zhongming
Xiao Dongminf
(Harbin Marine Boiler & Turbine Research Institute, P. R. China)
(Harbin Marine Boiler & Turbine Research Institute, P. R. China)
(Harbin Marine Boiler & Turbine Research Institute, P. R. China)
(Harbin Marine Boiler & Turbine Research Institute, P. R. China)
(Harbin Marine Boiler & Turbine Research Institute, P. R. China)
#062
Annular Sector Cascade Rig Tests of a CMC Stator Vane
Nita Kozo
(IHI Corporation)
Nita Kozo
(IHI Corporation)
Okita Yoji
(IHI Corporation)
Nakamata Chiyuki
(IHI Corporation)
#212
Effect of Fin Overlap and Eccentricity on Rim Seal Performance ]
Ishida Katsuhiko
(Kawasaki Heavy Industries, Ltd.)
Ishida Kastsuhiko
(Kawasaki Heavy Industries, Ltd.)
HT(5)
Heat Transfer on Film Cooling I
22
Nov.15(Tuesday) 11:20-12:50
Room1009
#172
Gas Turbine Blade Tip and Near-Tip Heat Transfer with Film Cooling
Acharya Sumanta
(Louisiana State University)
Kramer Gregory
(Louisiana State University, USA )
Moreaux Louis
(Louisiana State University, USA)
Acharya Sumanta
(Louisiana State University, USA)
Nakamata Chiyuki
(IHI Corpn., Japan)
154 Performance of Tripod Antivortex Injection Holes on Vane Pressure Side Film Cooling
LeBlanc Chris
(Virginia Tech)
LeBlanc Chris
(Virginia Tech)
Ekkad Srinath
(Virginia Tech)
Narzary Diganta
(Virginia Tech)
#195
Film Cooling Performance over Dimpled Cutback Surface at Airfoil Trailing Edge
Murata Akira
(Tokyo University of Agriculture and Technology)
Nishida Satomi
(Tokyo University of Agriculture and Technology)
Murata Akira
(Tokyo University of Agriculture and Technology)
Ito Kousuke
(Tokyo University of Agriculture and Technology)
Saito Hiroshi
(Tokyo University of Agriculture and Technology)
Iwamoto Kaoru
(Tokyo University of Agriculture and Technology)
HT(6) Heat Transfer on Film Cooling II
Nov.16(Wednesday) 9:30-11:00
Room1009
#148
Multi-Row Transpiration Cooling with Comparison to Discrete Arrays
Natsui Greg
(University of Central Florida)
Natsui Greg
(University of Central Florida )
Miller Mark
(University of Central Florida)
Torrance Michael
(University of Central Florida)
Ricklick Mark
(University of Central Florida )
Kapat Jayanta
(University of Central Florida)
23
#149
Overall Thermal Performance of Transport Promoters in Internal Cooling Channels for Rotating Machineries
Valentino Michelle
(Center for Advanced Turbines and Energy Research, Laboratory for Turbine Aerodynamics, Heat Transfer, and Durability, Univer s ity of
Central Florida)
Valentino Michelle
(CATER/FCAAP, UCF)
Tran Lucky
(CATER/FCAAP, UCF)
Slabaugh Carson
(CATER/FCAAP, UCF)
Ricklick Mark
(CATER/FCAAP, UCF)
Kapat Jay
(CATER/FCAAP, UCF)
#057
Heat Transfer and Aerodynamics Studies of Multiple Cooling Holes
Abdullah Kamil
(Iwate University)
AbdullahKKamilIwate ( University)
Funazak Ken-ichi
(Iwate University)
Ideta Takeomi
(IHI Corporation)
Kikkawa Yohei
(Iwate University)
HT(7) Heat Transfer on Film Cooling III
Nov.16(Wednesday) 11:20-12:50
Room1009
#085
Numerical Investigation of the NEKOMIMI Hole Configuration under Hot Gas Conditions
Kusterer Karsten
(B&B-AGEMA)
Kusterer Karsten
(B&B-AGEMA)
Bohn Dieter
(RWTH Aachen University)
Sugimoto Takao
(KHI)
Kazari Masahide
(KHI)
Tanaka Ryozo
(KHI)
#049
Experimental Investigation of Film Cooling in a Rotor Blade of a 1.5-stage Turbine
Li Guoqing
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
Li Guoqing
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
#058
Free-Stream Turbulence Effects on Leading Edge Film Cooling
Kawabata Hirokazu
(Iwate University)
24
Funazaki Ken-ichi
Kawabata Hirokazu
Okita Yoji
(Iwate University)
(Iwate University)
(IHI Corporation)
HT(8) Heat Transfer on Film Cooling IV
Nov.17(Thursday) 9:15-11:00
Room1009
Keynote Lecture-7
Ligrani Phil
Ligrani Phil
Aerodynamic Losses in Turbines With and Without Film Cooling (Keynote Lecture)
(Saint Louis University)
(Saint Louis University)
#227
Effect of Endwall Film Cooling on Horseshoe Vortex Formation at the Junction of Airfoil Leading Edge
Kozono Shintaro
(Osaka University)
Kozono Shintaro
(Osaka University)
Takeishi Kenichiro
(Osaka University)
OdaYutaka Osaka University
Seguchi Junichi
(Osaka University)
#234
Numerical Study for Dependency of Cross-flow Inlet Turbulence on Film Cooling Effectiveness
Fujimoto Shu
(IHI corporation)
Fujimoto Shu
(IHI corporation)
HT(9) Heat Transfer on Film Cooling V
Nov.17(Thursday) 11:20-12:50
Room1009
#122
Numerical Study of Film Cooling on a Vane Endwall by Large Eddy Simulation with a Cooling Hole Model
Oda Yutaka
(Osaka University)
Oda Yutaka
(Osaka University)
Takeishi Kenichiro
(Osaka University)
Masataka Uchibori
(Osaka University)
#126
The Influence of Periodic Unsteady Wakes on Endwall Film Cooling with Combustor-Turbine Interface Gap Leakage Flow
Zhang Yang
(Tsinghua University)
25
Zhang Yang
(Tsinghua University)
#138
Effect of Incidence Angle on Film Cooling ? Separating Bubbles Interaction in High Pressure Turbine
Yuan Xin
(Tsinghua University)
Hong Yinyi
(Tsinghua University)
Lin Zhirong
(Tsinghua University)
Yuan Xin
(Tsinghua University)
HT(10) Heat Transfer with Impinging Jet I
Nov.14(Monday) 11:40-13:10
Room1009
#228
Effect of Injection Parameters on Jet Array Impingement Heat Transfer
Yamane Yoshisaburo
(Graduate School of Engineering, Tokyo University of Science)
Yamane Yoshisaburo
(Graduate School of Engineering, Tokyo University of Science)
Ichikawa Yoshiyasu
(Graduate School of Engineering, Tokyo University of Science)
Yamamoto Makoto
(Mechanical Engineering Department, Tokyo University of Science)
Honami Shinji
(Mechanical Engineering Department, Tokyo University of Science)
#257
Heat Transfer Characteristics of Some Multiple Impinging Jets with Swirling Flow Effect
Nuntadusit Chayut
(Prince of Songkla University)
Nuntadusit Chayut
(Prince of Songkla University)
Wae-hayee M.
(Prince of Songkla University)
#258
Heat Transfer Enhancement of an Impinging Jet in Crossflow by Elongated Round Orifice
Nuntadusit Chayut
(Prince of Songkla University)
Wae-hayee M.
(Prince of Songkla University)
Nuntadusit Chayut
(Prince of Songkla University)
Tekasakul P.
(Prince of Songkla University)
HT(11) Heat Transfer with Impinging Jet II
Nov.14(Monday) 14:30-16:00
Room1008
#151
Heat Transfer to Impinging Jets in a Narrow Channel
26
Miller Mark
Miller Mark
Claretti Roberto
Ricklick Mark
Kapat J. S.
(University of Central Florida)
(University of Central Florida)
(University of Central Florida)
(University of Central Florida)
(University of Central Florida)
#097
Heat Transfer Characteristics of Impingement/Effusion Cooling on a Concave Duct
Cho Hyung Hee
(Yonsei University)
Jung Eui Yeop
(Yonsei University)
Park Chan Ung
(Yonsei University)
Lee Dong Hyun
(Yonsei University)
Cho Hyung Hee
(Yonsei University)
#003
Effect of Roughened Element on Target Surface and Cooling Hole Shape on Impingement Cooling Effectiveness
Nakamata Chiyuki
(HI Corporation)
Nakamata Chiyuki
(IHI)
HT(12) Internal Cooling I
Nov.14(Monday) 16:20-17:50
Room1008
#216
Investigation on Heat Transfer Characteristics of a Cooling Channel with Densely Arranged Rib Turbulator
Ishida Katsuhiko
(Kawasaki Heavy Industries, Ltd.)
Ishida Katsuhiko
(Kawasaki Heavy Industries, Ltd.)
Hagari Tomoko
(Kawasaki Heavy Industries, Ltd.)
Takeishi Kenichiro
(Osaka University)
Oda Yutaka
(Osaka University)
“#226 Heat Transfer Characteristics of Rib-Roughened Channel with Angled Ribs at Low Pitch-to-Height Ratio
Kitada Hiroki
(Osaka University)
Kitada Hiroki
(Osaka University)
Takeishi Kenichiro
(Osaka University)
Komiyama Masaharu
(Osaka University)
Maeda Hidetake
(Osaka University)
Ishida Katsuhiko
(Kawasaki Heavy Industries, Ltd.)
27
#077
Numerical Optimization of Ribbed Serpentine Cooling Ducts
Zhang Xiaodong
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
Zhang Xiaodong
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
Liu Jianjun
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
An Baitao
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
HT(13) Internal Cooling II
Nov.15(Tuesday) 9:30-11:00
Room1008
#203
Study on the Effects of Pin Inclination in Convection Cooling for Turbine Blade
Yamane Takashi
(Japan Aerospace Exploratin Agency)
Takeda Toshihiro
(Tokyo University of Agriculture and Technology)
Yamane Takashi
(Japan Aerospace Exploratin Agency)
Bamba Takahiro
(IHI Corporation)
#123
Shape Optimization of a Rotating U-Duct Channel with Guide Vanes in the Turning Region
Kim Kwang-Yong
(Inha University)
Moon Mi-Ae Inha
(Univ.)
Kim Kwang-Yong
(Inha Univ.)
#103
Heat Transfer and Fluid Flow in a Rectangular Channel with the Combination of Dimples, Protrusions and Angled Ribs
Xie Yonghui
(Xi'an jiaotong University/ China)
SV(1) Structure, Vibration and Noise I
Nov.14(Monday) 11:40-13:25
Room1006
Keynote Lecture-2 New Directions in Turbomachinery Aero-Acoustics (Keynote Lecture)
Spakovszky Zoltan S.
(MIT, GTL)
#047
Environmental Noise Impact Assessment Method of Cogeneration System
Kaneuchi Ken
(Osaka Gas CO., LTD)
Kaneuchi Ken
(Osaka Gas CO., LTD)
28
Nishimura Koichi
(Osaka Gas CO., LTD)
#079
Experimental and Numerical Investigation of Supersonic Jet Noise Reduction with Microjet Injection
Okada Ryuichi
(School of Engineering, University of Tokyo)
Okada Ryuichi
(School of Engineering, University of Tokyo)
Watanabe Toshinori
(Department of Aeronautics and Astronautics, University of Tokyo)
Uzawa Seiji
(Department of Aeronautics and Astronautics, University of Tokyo)
Himeno Takehiro
(Department of Aeronautics and Astronautics, University of Tokyo)
Oishi Tsutomu
(IHI Corporation)
SV(2) Structure, Vibration and Noise II
Nov.14(Monday) 14:30-16:00
Room1006
#207
Research on Mixing Devices for Jet Noise Reduction
Ishii Tatsuya
(JAXA)
Ishii Tatsuya
(JAXA)
Oinuma Hideshi
(JAXA)
Nagai Kenichiro
(JAXA)
Tagashira Takeshi
(JAXA)
#065
Study on Vibration Response Reduction of Mistuned Bladed Disk by Use of Asymmetric Vane Spacing
Kaneko Yasutomo
(Ryukoku University)
Kaneko Yasutomo
(Ryukoku University)
Ohta Masaki
(Ryukoku University)
Mori Kazushi
(Mitsubishi Heavy Industries)
Ohyama Hiroharu
(Mitsubishi Heavy Industries)
SV(3) Structure, Vibration and Noise III
Nov.14(Monday) 16:20-17:50
Room1006
#186
Reduced Order Modeling of a Bladed Rotor with Geometric Mistuning: Alternative Bases and Extremely Large Mistuning
Sinha Alok
(The Pennsylvania State University)
Bhartiya Yasharth
(Penn. State Univ.)
29
Sinha Alok
(Penn. State Univ.)
#034
Development and Validation of Flutter Analysis Tool Using a Harmonic Balance Method
Aotsuka Mizuho
(IHI Corporation)
Aotsuka Mizuho
(IHI Corporation)
Kielb Robert
(Duke University)
Hall Kenneth
(Duke University)
#218
3-D Linear Unsteady Aerodynamic-Force Calculations of Vibrating Blade Rows Using the UPACS-based CFD Codes
Yamasaki Nobuhiko
(Kyushu University)
Kubo Ayumi
(Kyushu University)
Yamasaki Nobuhiko
(Kyushu University)
SV(4) Structure, Vibration and Noise IV
Nov.15(Tuesday) 9:30-11:00
Room1007
#093
Investigation on Impeller Blade Tip Rubbing During Compressor Performacne Test
Park Luke
(DOOSAN Heavy Industry and Construction)
Park Luke
(DOOSAN Heavy Industry and Construction)
246 A Study on Stacking Method in Advanced Fan Blade
Ota Toyohiko
(ASIRI)
Fujimoto Takayuki
(ASIRI)
Kusunoki Itaru
(ASIRI)
Ota Toyohiko
(ASIRI)
Masaki Daisaku
(JAXA)
#167
Development of an Assistant Design System for Gas Foil Bearings
Feng Kai
(Tokyo Institute of Technology)
Feng Kai
(Tokyo Institute of Technology)
Kaneko Shigehiko
(The University of Tokyo)
DOTT(1)
Turbocharger Technology I
Nov.16(Wednesday) 9:30-11:00
Room1005
30
Keynote Lecture-3 Boosting and Turbocharger Needs for Highly Downsized Low Carbon Vehicles (Keynote Lecture)
Martinez-Botas Ricardo F. (Imperial College London)
#026
Technology of the Turbocharger Applied to IMO2 4-stroke Marine Diesel Engine
Nakano Kenji
(IHI Corporation)
Nakano Kenji
(IHI Corporation)
Nakano Ken
(IHI Corporation)
Murano Ryuuma
(IHI Corporation)
Hirata Yutaka
(IHI Corporation)
DOTT(2)
Turbocharger Technology II
Nov.16(Wednesday) 11:20-12:50
Room1005
#052
Design and Development of a Low Pressure Turbine for Turbocompounding Applications
Ricardo Martinez-Botas (Imperial College London)
Aman Bin Mamat
(Imperial College London)
Alessandro Romagnoli (Imperial College London )
Ricardo Martinez-Botas (Imperial College London)
#080
Feature of Internal Flow Phenomena of Centrifugal Compressor for Turbocharger with Wide Operating Range
Tomita Isao
(Nagasaki Research & Development Center Mitsubishi Heavy Industries, Ltd.)
Tomita Isao
(Nagasaki Research & Development Center Mitsubishi Heavy Industries, Ltd.)
Ibaraki Seiichi
(Nagasaki Research & Development Center Mitsubishi Heavy Industries, Ltd.)
Furukawa Masato
(Department of Mechanical Engineering Kyushu University)
Yamada Kazutoyo
(Department of Mechanical Engineering Kyushu University)
#233
Study on the Tip Clearance Effects in the Centrifugal Compressor of a Micro Gas Turbine by Means of Numerical Simulations
Olivero Mattia
(Delft University of Technology)
Olivero Mattia
(Delft University of Technology)
Javed Adeel
(Delft University of Technology)
Pecnik Rene
(Delft University of Technology)
Colonna Piero
(Delft University of Technology)
Van Buijtenen
(Jos Delft University of Technology)
31
DOTT(3)
Turbocharger Technology III
Nov.17(Thursday) 9:30-11:00
Room1005
#121
Effect of Pipe System and Casing Configuration on Surge Phenomenon of Centrifugal Compressor
Ayukawa Shouta
(Osaka Institute of Technology)
Ayukawa Shouta
(Osaka Institute of Technology)
Kawata Yutaka
(Osaka Institute of Technology)
Inoue Ken
(Osaka Institute of Technology)
Fukuyama Kazunari
(Osaka Institute of Technology)
Tsujimoto Yoshinobu
(Osaka University)
#109
Application of FMM for Mistuning Analysis of Radial Inflow Turbine
Hattori Hiroaki
(IHI Corporation)
Hattori Hiroaki
(IHI Corporation)
DOTT(4)
Performance of Turbocharger
Nov.17(Thursday) 11:20-12:50
Room1005
#088
Improvement of Turbocharger Compressor Map width and Performance due to Vanes in the Annular Cavity of a Classical Bleed Slot System
Sivagnanasundaram Subenuka (Queen's University Belfast UK)
Sivagnanasundaram Subenuka (Queen's University Belfast, UK)
Spence Stephen
(Queen's University Belfast, UK)
Early Juliana
(Queen's University Belfast, UK)
Nikpour Bahram
(Cummins Turbo Technologies, UK)
#112
Influence of Variable Nozzle Geometry on Radial Turbine Performance
Natkaniec Christoph K.
(Institute of Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover)
Natkaniec Christoph K
(Institute of Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover)
Kammeyer Jasper
(Instituteof Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover)
Seume Joerg R
(nstitute of Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover)
#158
Single Entry Mixed Flow Turbine Performance Prediction With 1-D Gas Dynamic Code Coupled With Mean Line Model
32
Rajoo Srithar
Chiong Meng Soon
Rajoo Srithar
Romagnoli Alessandro
(Universiti Teknologi Malaysia)
(Universiti Teknologi Malaysia)
(Universiti Teknologi Malaysia)
(Imperial College London)
ST＊(1) Steam Turbine I
Nov.15(Tuesday) 9:30-11:00
Room1006
#053
Prediction of Effects of Potential Field Interaction and Wake Interaction on Unsteady Force for Buckets
Nakajima Tomomi
(Hitachi Ltd.)
Nakajima Tomomi
(Hitachi Ltd.)
Shikano Yoshio
(Hitachi Ltd).
Yamashita Yutaka
(Hitachi Ltd.)
#104
Non-equilibrium Condensing Flow Modeling in Nozzle and Turbine Cascade
Yuan Xin
(Tsinghua University)
Zhu Xiaofeng
(Tsinghua University)
Lin Zhirong
(Tsinghua University)
Yuan Xin
(Tsinghua University)
#002
Controlling Mixing at the Interaction Zone through Systematic Variation of the Inlet Rotor Cavity Volume and Length Scale
Barmpalias Konstantinos
(ETH Zurich)
Barmpalias Konstantinos G.
(ETH Zurich)
Kalfas Anestis I.
(AUTH)
Abhari Reza S.
(ETH Zurich)
Hirano Toshio
(Toshiba Corporation)
Shibukawa Naoki
(Toshiba Corporation)
ST＊(2) Steam Turbine II
Nov.15(Tuesday) 11:20-12:50
Room1006
Keynote Lecture-4
Okita Nobuo
Recent Technologies for Concentrated Solar Power Systems and Steam Turbines
(Toshiba Corporation)
33
(Keynote Lecture)
#146
Blade Manufacturing Process Appraisal Using a Coordinate Measurement Machine
Zachos Pavlos
(Cranfield University)
Zachos Pavlos
(Cranfield University)
Kalfas Anestis
(Pilidis)
Pericles
ST＊(3) Long Blade Technology of Steam Turbine
Nov.16(Wednesday) 9:30-11:00
Room1006
#168
Development and Verification of The Next Generation's Steam Turbine
Watanabe Toshio
(Mitsubishi Heavy Industries,Ltd. )
Watanabe Toshio
(Mitsubishi Heavy Industries,Ltd.)
Ohyama Hiroharu
(Mitsubishi Heavy Industries,Ltd.)
Miyawaki Toshihiro
(Mitsubishi Heavy Industries,Ltd)
Mori Kazushi
(Mitsubishi Heavy Industries,Ltd.)
#211
Development of Titanium 48-inch Last Stage Series for 3600rpm Steam Turbine
Shibukawa Naoki
(Toshiba Corporation)
Murata Yoriharu
(Toshiba Corporation)
Okuno Kenichi
(Toshiba Corporation )
Shibukawa Naoki
(Toshiba Corporation)
Murakami Itaru
(Toshiba Corporation)
Hashidate Tadayuki
(Toshiba Corporation )
#249
Development of Titanium 3600rpm-50inch and 3000rpm-60inch Last Stage Blades for Steam Turbines
Senoo Shigeki
(Hitachi, Ltd.)
Senoo Shigeki
(Hitachi, Ltd.)
Hideki Ono
(Hitachi, Ltd.)
Takanori Shibata
(Hitachi, Ltd.)
Susumu Nakano
(Hitachi, Ltd.)
Kazuya Sakakibara
(Hitachi, Ltd.)
ST＊(4) Efficiency Enhancement of Steam Turbine
34
Nov.16(Wednesday) 11:20-13:05
Room1006
"Keynote Lecture-5,
#120" Fluid Dynamic Efficiency Optimization of Steam Turbine Stages Considering Leakage Influences and Inter-stage Reciprocal Interferences
Tanuma Tadashi
(Teikyo University)
Yuan Xin
(Tsinghua University)
Pu Qian
(Tsinghua University)
Zhu Xiaofeng
(Tsinghua University)
Niizeki Yoshiki
(Toshiba Corporation)
Tanuma Tadashi
(Teikyo University)
#155
Multilevel Design Optimization for Long Blade of Steam Turbines Using Self-adaptive Differential Evolutionary Algorithms
Li Jun
(Xi'an Jiaotong University)
Song Liming
(Xi'an Jiaotong University)
Ohyama Hiroharu
(Mitsubishi Heavy Industries, LTD.)
Li Jun
(Xi'an Jiaotong University)
Feng Zhenping
(Xi'an Jiaotong University)
#173
Development of New High-Performance Labyrinth Seal
Kuwamura Yoshihiro
(Mitsubishi Heavy Industries, Ltd.)
Ooyama Hiroharu
(Mitsubishi Heavy Industries, Ltd.)
Tanaka Yoshinori
(Mitsubishi Heavy Industries, Ltd.)
Nishimoto Shin
(Mitsubishi Heavy Industries, Ltd.)
Matsumoto Kazuyuki
(Mitsubishi Heavy Industries, Ltd.)
Uehara Hidekazu
(Mitsubishi Heavy Industries, Ltd.)
ST＊(5) Ultra-Supercritical Steam Turbine I
Nov.17(Thursday) 9:30-11:00
Room1006
#169
"Development of Advanced USC Technologies for 700℃ class
High Temperature Steam Turbines"
Tanaka Yoshinori
(Mitsubishi Heavy Industries, LTD.)
Tanaka Yoshinori
(Mitsubishi Heavy Industries, LTD.)
35
Nishimoto Shin
Setoyama Masayuki
Yamamoto Ryuichi
Hirakawa Yuichi
(Mitsubishi Heavy Industries, LTD.)
(Mitsubishi Heavy Industries, LTD.)
(Mitsubishi Heavy Industries, LTD.)
(Mitsubishi Heavy Industries, LTD.)
#188
Sand Castings made of Alloy 625 and Dissimilar Welding for Steam Turbine Applications
Lochbichler Claus
(Voestalpine Giesserei Traisen GmbH)
Lochbichler Claus
(Voestalpine Giesserei Traisen GmbH)
Kolenz Franz
(Voestalpine Giesserei Traisen GmbH)
#018
Simulation of Supercritical-fluid Flows in Turbomachinery
Yamamoto Satoru
(Tohoku University)
Wang Ning
(Tohoku University)
Furusawa Takashi
(Tohoku University)
Furusawa Takashi
(Tohoku University)
Sasao Yasuhiro
(Tohoku University)
Yamamoto Satoru
ST＊(6) Ultra-Supercritical Steam Turbine II
Nov.17(Thursday) 11:20-12:50
Room1006
#210
Turbine Design and Materials Aspects for A-USC Power Plants
Takahashi Takeo
(Toshiba corporation)
Takahashi Takeo
(Toshiba corporation)
Murakami Yuya
(Toshiba corporation)
Iwai Shogo
(Toshiba corporation)
Miyashita Shigekazu
(Toshiba corporation)
Nemoto Kuniyoshi
(Toshiba corporation)
#176
Material Design and Trial Manufacturing of Ni-base Supwealloy for A-USC Steam Turbine Large Components
Saito Eiji
(Hitachi, Ltd.)
Imano Shinya
(Hitachi, Ltd.)
Sato Jun
(Hitachi, Ltd.)
Kamoshida Hironori
(Hitachi, Ltd.)
36
Saito Eiji
(Hitachi, Ltd.)
MT＊(1) Advance Gas Turbine Material
Nov.14(Monday) 11:40-13:10
Room1005
#008
Development of NIMS Burner Rig and Cyclic Oxidation of Ni-base Single Crystal Superalloys
Matsumoto Kazuhide
(National Institute for Materials Science)
Matsumoto Kazuhide
(NIMS)
Koizumi Yutaka
(NIMS)
Kawagishi Kyoko
(NIMS)
Harada Hiroshi
(NIMS)
#181
Development of Ni -base Single-Crystal Superalloy for the Next Generation Gas Turbine blade
Taneike Masaki
(Mitsubishi Heavy Industries Ltd.)
Okada Ikuo
(Mitsubishi Heavy Industries Ltd. )
Taneike Masaki
(Mitsubishi Heavy Industries Ltd.)
Oguma Hidetaka
(Mitsubishi Heavy Industries Ltd.)
Yokokawa Tadaharu
(ational Institute for Materials Science )
Harada Hiroshi ational Institute for Materials Science
MT＊(2) Crack Propagation in Gas Turbine Component
Nov.14(Monday) 14:30-16:00
Room1005
#031
Evaluation of Crack Propagation Behavior in Gas Turbine First-Stage Nozzle
Kagawa Hiroyuki
(The Kansai Electric power Co. Inc.)
Kagawa Hiroyuki
(The Kansai Electric power Co. Inc.)
#061
Fatigue Crack Propagation Behavior Significantly Interacting with Microstructural Units in Thin Wall Ni-base Superalloy Structures
Okazaki Masakazu
(Nagaoka University of Technology)
Okazaki Masakazu
(Nagaoka University of Technology)
Sakaguchi Motoki
(Nagaoka University of Technology)
Yamanobe Sou
(Nagaoka University of Technology)
37
Namba Ko-ichi
(Mitsui Engineering & Shipbuilding CO., LTD)
#199
Characteristics of Crack Initiation of Inconel? Alloy 706 for Gas Turbine Rotor
Kobayashi Daisuke
(Electric Power Research and Development Center, Chubu Electric Power Co., Inc.)
Kobayashi Daisuke
(Chubu Electric Power Company)
Ito Akihiro
(Chubu Electric Power Company)
Miyabe Masamichi
(Chubu Electric Power Company)
Kagiya Yukio
(Chubu Electric Power Company)
Ishibashi Kazutoshi
(Toshiba Corporation)
MT＊(3) Gas Turbine Failure and Life Assessment I
Nov.14(Monday) 16:20-17:50
Room1005
#069
Examination of Estimation Method of Damage in Gas Turbine Blade Root Fixings
Kurashima Hirotaka
(Kawasaki Heavy Industries, LTD.)
Kurashima Hirotaka
(KHI)
Imai Tatsuya
(KHI)
Matsuda Hirokazu
(KHI)
Hiramatsu Hideki
(KHI)
Tanimura Kazuhiko
(KHI)
“042
First Stage Segmented Nozzle Failure Analysis
Asadikouhanjani Saeed (MAPNA Turbine Blade Engineering & Manufacturing Co. – PARTO)
Asadikouhanjani Saeed (MAPNA Turbine Blade Engineering & Manufacturing Co. – PARTO)
Ghorbani Reza
(MAPNA Turbine Blade Engineering & Manufacturing Co. - PARTO )
#075
Evaluation on Relaxation Behaviors of Compressive Residual Stress of Peened Inconel? Alloy 706 Test Specimens after Thermal and Stress Aging Treatments
Sumiya rie
(Toshiba Corporation Power Systems Company )
Sumiya Rie
(Toshiba Corporation Power Systems Company)
Tazawa Toshiyuki
(Toshiba Corporation Power Systems Company)
Yoshioka Yomei
(Toshiba Corporation Power Systems Company )
Ishibashi Kazutoshi
(Toshiba Corporation Power Systems Company )
Kobayashi Daisuke
(Chubu Electric Power Company)
38
MT＊(4) Gas Turbine Failure and Life Assessment II
Nov.15(Tuesday) 9:30-11:00
Room1005
74 Development and Application of Repair Technology for Land-Base Gas Turbine Nozzles
Saito Daizo
(Toshiba Corporation )
Yoshioka Yomei
(Toshiba Corporation)
Takaku Reki
(Toshiba Corporation)
Kitayama Kazuhiro
(Toshiba Corporation)
Sakai Yoshiaki
(Toshiba Corporation)
#185
Effects of Stress and Oxidation for Creep and Creep-fatigue Behaviors of Ni-base Superalloy Inconel Alloy 706
Yoshioka Yomei
(Toshiba corporation)
Yoshioka Yomei
(Toshiba corporation)
Ishibashi Kazutoshi
(Toshiba corporation)
Kobayashi Daisuke
(Chubu Electric Power Company)
Ito Akihiro
(Chubu Electric Power Company)
Kagiya Yukio
(Chubu Electric Power Company)
#190
Gas Turbine Condition Diagnostic Techniques for a Proactive Maintenance
Mikami Naotaka
(Mitsubishi Heavy Industries, Ltd.)
Mikami Naotaka
(Mitsubishi Heavy Industries, Ltd.)
Moriwaki Isao
(Mitsubishi Heavy Industries, Ltd.)
Ozeki Kazutoshi
(Mitsubishi Heavy Industries, Ltd)
MT＊(5) Coating Technology
Nov.15(Tuesday) 11:20-12:50
Room1005
#118
Damage Behavior and Residual Interfacial Strength of Thermal Barrier Coatings after Thermal Cycle Fatigue
Yamazaki Yasuhiro
(Niigata Institute of Technology)
Yamazaki Yasuhiro
(Niigata Institute of Technology)
Kuga Shin-ichiro
(Niigata Institute of Technology)
Fukanuma Hirotaka
(Plasma Gikenn Co., Ltd.)
Naoyuki Ohno
(Plasma Gikenn Co., Ltd.)
39
#180
Development of Thermal Barrier Coating for for the Next Generation 1700℃ Class Gas Turbine
Torigoe Taiji
(Mitsubishi Heavy Industries,LTD)
Torigoe Taiji
(Takasago Research & Development Center)
Kaneko Hideaki
(Takasago Research & Development Center)
Nagano Ichiro
(Takasago Research & Development Center)
Eisaku Ito
(Takasago Research & Development Center)
Tsukagoshi Keizo
(Takasago Machinery Works)
#253
New Materials and Processing Concepts for High Performance Therm al Barrier Coatings
Stover Detlev
(Institute of Energy and Climate Research/ Germany)
Stover Detlev
PF＊(1) Performance I
Nov.14(Monday) 14:30-16:00
Room1004
#010
A Robust and Multi-Objective Trade-off Design Method for Secondary Air System
Ihara Shinichiro
(IHI Corporation)
Ihara Shinichiro
(IHI Corporation)
Kure Hirotaka
(IHI Corporation)
Mori Hatsuo
(IHI Corporation)
#087
Study on Turboprop Engine Performance Behaviors Considering Inlet and Exhaust Duct Pressure Loss in Altitude Test Chamber Condition
Kong Changduk
(Chosun University)
Kong Changduk
(Chosun University)
Kim Keonwoo
(Chosun University)
Yoo JaeKyoug
(Chosun University)
#107
"Fault Diagnostics of A Turbofan Engine
Using Inverse Performance Model and Artificial Intelligent Method"
Kong Changduk
(univ. chosun)
Kong Changduk
(univ. chosun)
Lim Semyeong
(univ. chosun)
Kim Keongwoo
(univ. chosun)
40
PF＊(2) Performance II
Nov.14(Monday) 16:20-17:50
Room1004
#144
Performance Evaluation of a Microturbine Centrifugal Compressor Using a Novel Modeling Approach
Javed Adeel
(Delft University of Technology)
Javed Adeel
(Delft University of Technology)
Olivero Mattia
(Delft University of Technology)
Pecnik Rene
(Delft University of Technology)
van Buijtenen Jos. P
(Delft University of Technology)
#170
A Study on Thrust of Radial Turbine That Have a Permanent Magnet Generator Rotor in a Common Shaft
Nakano Susumu
(Hitachi, Ltd.)
Nakano Susumu
(Hitachi, Ltd.)
Tsubouchi Kuniyoshi
(Formerly with Hitachi, Ltd.)
Inoue Tomoaki
(Hitachi, Ltd.)
Kishibe Tadaharu
(Hitachi, Ltd.)
Shiraiwa Hiroyuki
(Hitachi Engineering & Services Co. Ltd.)
PF＊(3) Performance III
Nov.15(Tuesday) 9:30-11:00
Room1004
#206
Coolant Modulation and Pre-cooling to Resolve Turbine Blade Overheating Caused by Firing Syngas in Gas Turbines
Kim Tong Seop
(Inha University )
Kang Do Won
(Graduate School, Inha Univ.)
Kim Ik Hwan
(Graduate School, Inha Univ.)
Kim Tong Seop
(Dept. Mech. Eng., Inha Univ.)
#231
Performance Expectation of a Semi-closed Oxy-fuel Combustion Combined Cycle Using an Existing Gas Turbine
Kim Tong Seop
(Inha University)
Yang Hyun Jun
(Graduate School, Inha Univ.)
Kang Do Won
(Graduate School, Inha Univ.)
Kang Soo Young
(Graduate School, Inha Univ.)
41
Kim Tong Seop
(Dept. of Mech. Eng., Inha Univ.)
PF＊(4) System and Control I
Nov.15(Tuesday) 11:20-12:50
Room1004
#041
More Electric Engine Architecture for Fuel System of Aircraft Gas Turbine Engine
Seki Naoki
(IHI Corporation)
Seki Naoki
(IHI Corporation)
Noriko Morioka
(IHI Corporation)
Hitoshi Oyori
(IHI Aerospace Co., Ltd.)
Daiki Kakiuchi
(IHI Corporation )
Kanji Ozawa
(IHI Corporation)
#159
Dynamic Simulation of Active Compressor Stability Control for a Gas Turbine Engine
Panov Vili
(Siemens Industrial Turbomachinery Ltd.)
Panov Vili
(SIT Ltd)
#200
Load-following Operations of VHTR Gas-turbine Cogeneration System for Developing Countries
Sato Hiroyuki
(Japan Atomic Energy Agency )
Sato Hiroyuki
(Japan Atomic Energy Agency)
Yan Xing L.
(Japan Atomic Energy Agency)
Tachibana Yukio
(Japan Atomic Energy Agency)
Kato Yukitaka
(Tokyo Institute of Technology)
PF＊(5) System and Control II
Nov.16(Wednesday) 9:30-11:00
Room1004
#208
Development of a Control System for the Catalytic Combustion Gas Turbine (M1A-13X)
Kurosaka So
(Kawasaki Heavy Industries, Ltd.)
Kurosaka So
(Kawasaki Heavy Industries, Ltd.)
Ashikaga Mitsugu
(Kawasaki Heavy Industries, Ltd.)
Ogata Masahiro
(Kawasaki Heavy Industries, Ltd.)
Sato Tsuyoshi
(Kawasaki Heavy Industries, Ltd.)
42
Nishi Muneyuki
(Kawasaki Heavy Industries, Ltd.)
#240
Application of Model-Based Control for JAXA’s Engine Test
Tagashira Takeshi
(Japan Aerospace Exploration Agency)
Tagashira Takeshi
(JAXA)
Mizuno Takuya
(JAXA)
Nakata Yasushi
(IHI)
Satake Tsunehisa
(JAXA)
Sugiyama Nanahisa
(JAXA)
#251
Identification of Jet Engine Dynamics Based on the Experimental Data
Kimura Mai
(IHI Corporation)
Kimura Mai
(IHI Corporation)
Kakiuchi Daiki
(IHI Corporation)
Furukawa Hiroyuki
(IHI Corporation)
Tagashira Takeshi
(Japan Aerospace Exploration Agency)
Sugiyama Nanahisa
(Japan Aerospace Exploration Agency)
PF＊(6) Stability Enhancement I
Nov.16(Wednesday) 11:20-13:05
Room1004
Keynote Lecture-1
Kim Kwan-yong
Shape Optimization of Casing Treatment for a Transonic Axial Compressor to Improve Operating Stability (Keynote Lecture)
(Inha University)
#070
Stall Inception Model for Fan/Compressors including the Effect of Three Dimensional Blade Shape
Liu Xiaohua Beihang
(University)
Liu Xiaohua Beihang
(University, China)
Hou Ruiwei
(Shenyang Aeroengine Research Institute, Shenyang, China)
Sun Dakun
(Beihang University, China)
Sun Xiaofeng
(Beihang University, China)
#099
Comparison of Stability Range Extension with Micro and Large Air Injection in a Low-Speed Axial Compressor
Tong Zhiting
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
Tong zhiting
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
43
Li jichao
Nie Chaoqun
Chen Jinyi
(China Academy of Science for Postgraduates)
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
(Institute of Engineering Thermophysics, Chinese Academy of Sciences)
PF＊(7) Stability Enhancement II
Nov.17(Thursday) 9:15-11:00
Room1004
Keynote Lecture-6 A Suggested Mechanism of Significant Stall Suppression by Air Separator Devices in Axial Flow Fans (Keynote Lecture)
Yamaguchi Nobuyuki
(Meisei University)
#082
Effect of Circumferential Single Grooved Casing Treatment on Flow Instability of Transonic Compressor
Sakuma Yasunori
(University of Tokyo)
Sakuma Yasunori
(University of Tokyo)
Watanabe Toshinori
(University of Tokyo)
Himeno Takehiro
(University of Tokyo)
Kato Dai
(IHI Corporation)
Imaeda Motohiro
(IHI Corporation)
#014
Steady and Unsteady Flow Effects of Circumferential Grooves Casing Treatment in a Transonic Compressor Rotor
Hah Chunill
(NASA Glenn)
Hah Chunill
(NASA)
PF*(8) Progress in R&D over Recent 40 years
Nov.17(ThuRsday) 11:20-12:50
Room1202
#039
Feasibility study of CCS introduction considering technological and economic dimensions
Usui Takafumi
(Tohoku University)
Usui Takafumi
(Tohoku University)
Furubayashi Takaaki
(Tohoku University)
Nakata Toshihiko
(Tohoku University)
#213
The Evolusion of Airborne Power Systems
Jones Ben
(Rolls-Royce plc)
44
Jones Ben
(Rolls-Royce plc)
#222
Tech CLEAN Project: A technological Challenge for Environmental Protection
Futamura Hisao
(Japan Aerospace Exploration Agency)
Futamura Hisao
(JAXA)
Fukuyama Yoshitaka
(JAXA)
Nishizawa Toshio
(JAXA)
Yanagi Ryoji
(JAXA)
Note: This is tentative program, and is subject to change without prior notice.
45