WD013-338.5_Adams Solar_Module 3_Test

advertisement
Page 1
Module 3 Test Questions
Adams County WIRED Initiative
“Renewable Energy: Building a Skilled Workforce for Solar Solutions”
***
Test Questions: Module 3
Photovoltaic Fabrication and Assembly Processes and Assembly Methods
January 15, 2009
INSTRUCTIONS:
Please select the correct answer by placing an “X” next to it. Each question
has only one correct answer.
1.
Which type of material is used in solar cells?
____ (a)
Liquids
____ (b)
Semi-conductors
____ (c)
Metals
____ (d)
Insulators
2.
A solar cell needs at least two semiconductors: p-type (positive) and n-type (negative).
____ (a)
True
____ (b)
False
3.
A solar PV module consists of:
____ (a)
Multiple solar cells
____ (b)
One solar cell
____ (c)
A piece of a solar cell
Page 2
Module 3 Test Questions
4.
Which one is NOT a main purpose of the vacuum in vacuum deposition?
____ (a)
To clean the laboratory
____ (b)
To spread out the atoms
____ (c)
To reduce contamination
5.
Vapor depositions, plasma spraying, and sputtering are examples of ways to:
____ (a)
Raise the relative humidity
____ (b)
Deposit a thin film of semi-conductor
____ (c)
Antagonize the electrons
6.
The most common technique today for manufacturing thin-film, amorphous silicon PV (a-Si)
cells is large area glow discharge deposition.
____ (a)
True
____ (b)
False
7.
When a glow discharge tube is energized, electrons go toward the negative cathode and ions
go toward the positive anode.
____ (a)
True
____ (b)
False
8.
Which one is NOT a step in the Roll-to-Roll a-Si PV Manufacturing Process?
____ (a)
Web Washing
____ (b)
Spin test of the hard drive
____ (c)
Back Reflector Deposition (Ag / ZnO)
____ (d)
a-Si Alloy Deposition
____ (e)
Anti-Reflective (AR) Coating = Transparent Conductive Oxide (TCO
9.
When you see vapor coming off of solid dry ice you are seeing what phase change process?
____ (a)
Sublimation
____ (b)
Melting
____ (c)
Evaporation
____ (d)
Phase modulation
Agnes Talamantez Carroll & Associates
Education & Training - a multi-platform content provider
agnes@atc-associates.com
303.632.8245
Page 3
Module 3 Test Questions
10.
What laboratory in Colorado works on close-space sublimation and other solar PV
manufacturing experiments?
____ (a)
National Oceanic and Atmospheric Administration
____ (b)
National Center for Atmospheric Research
____ (c)
National Renewable Energy Laboratory
____ (d)
Lightning Data Center
11.
Which one is not an element in CdTe?
____ (a)
Tellurium
____ (b)
Potassium
____ (c)
Cadmium
12.
Which one is not an element in CIGS?
____ (a)
Gallium
____ (b)
Indium
____ (c)
Selenium
____ (d)
Copper
____ (e)
Uranium
13.
Which is not an advantage of vacuum deposition techniques?
____ a.
High-purity films can be deposited
____ b.
Source of material can be a solid in any form and purity
____ c.
The resulting thin-film module is more efficient than a crystalline module
____ d.
Deposition monitoring and control are relatively easy
14.
Which is NOT one of the assembly steps in the manufacturing process?
____ a.
Cell sorting
____ b.
Cell alignment
____ c.
Ribbon soldering
____ d.
Magnetic resonance
15.
Sputtering is a technical term used in the manufacturing of thin film photovoltaic cells.
____ True
____ False
Agnes Talamantez Carroll & Associates
Education & Training - a multi-platform content provider
agnes@atc-associates.com
303.632.8245
Page 4
Module 3 Test Questions
This workforce solution was funded by a grant awarded under the Workforce Innovation in Regional Development (WIRED) as implemented by the U.S. Department
of Labor’s Employment and Training Administration working in partnership with the Colorado Department of Labor and Employment, the Metro Denver Economic
Development Corporation, and the City and County of Denver's Office of Economic Development. The solution was created by the grantee and does not necessarily
reflect the official position of the U.S. Department of Labor. The Department of Labor makes no guarantees, warranties, or assurances of any kind, express or
implied, with respect to such information, including any information on linked sites and including, but not limited to, accuracy of the information or its completeness,
timeliness, usefulness, adequacy, continued availability, or ownership. This solution is copyrighted by the institution that created it. Internal use by an organization
and/or personal use by an individual for non-commercial purposes is permissible. All other uses require the prior authorization of the copyright owner.
Download