SPECIFICATIONS
of silicone drainage system for treating hydrocephalus of brain
Name and
number of items *
Purpose and product specifications
Purpose: for permanent implantation in order to provide the controlled unidirectional outflow fluid from the
brain into the right atrium or peritoneal cavity.
Quantity: The annual demand - 1500 pcs. For purchases no less than 300 pieces. * Budget - 79 500,00USD
Silicone drainage
system for treating
hydrocephalus of
brain a low pressure.
Quantity: 30 pcs.
Silicone drainage
system for treating
hydrocephalus of
brain a medium
pressure
Quantity: 90 pcs.
Silicone drainage
system for treating
hydrocephalus of
brain a high pressure
Quantity: 180 pcs.
 low-pressure system: about 15 ... 54 mm water column
 The system consists of the pump comprising the membrane with apertures, valve device,
and, inlet and outlet fittings, which are connected to the ventricular and cardiac catheters
 The diameters of the ventricular catheters within 2.2-2.5 mm, cardiac -1,2 mm
 The length of the ventricular within 80 -180mm, cardiac within 900 -1000 mm
 The diameter of base of the pump’s cupola should be not less than 14 mm, the diameter of
the flange is in the range 22 mm
 Pump bandwidth to 5 ml / min
 Possibility of holding computed tomography and magnetic resonance imaging
 Medium-pressure system: about 55...94 mm water column
 The system consists of the pump comprising the membrane with apertures, valve device,
and, inlet and outlet fittings, which are connected to the ventricular and cardiac catheters.
 The diameters of the ventricular catheters within 2.2-2.5 mm, cardiac -1,2 mm
 The length of the ventricular within 80 -180mm, cardiac within 900 -1000 mm
 The diameter of base of the pump’s cupola should be not less than 14 mm, the diameter of
the flange is in the range 22 mm
 Pump bandwidth to 5 ml / min
 Possibility of holding computed tomography and magnetic resonance imaging
 Purpose: for permanent implantation in order to provide a unidirectional controlled
outflow of the fluid from the brain into the right atrium or peritoneal cavity
 High-pressure system: about 95...144 mm water column
 The system consists of the pump comprising the membrane with apertures, valve device,
and, inlet and outlet fittings, which are connected to the ventricular and cardiac catheters.
 The diameters of the ventricular catheters within 2.2-2.5 mm, cardiac -1,2 mm
 The length of the ventricular within 80 -180mm, cardiac within 900 -1000 mm
 The diameter of base of the pump’s cupola should be not less than 14 mm, the diameter of
the flange is in the range 22 mm
 Pump bandwidth to 5 ml / min
 Possibility of holding computed tomography and magnetic resonance imaging
 Standards:
Compliance with standards of production ISO 9000: 2000; 9001: 2000 or its equivalent
copy (s) of the certificate (s) must be submitted with the Bid.
Registration:
 The product must be registered by Main Department for the quality control of medicines
and medical equipment under the Ministry of Health of the Republic of Uzbekistan or
be accompanied by a letter of guarantee with obligation it’s holding in the case
awarding of contract.
 Supply in sterile packaging
 Sterile packaging indicating the expiration date of sterilization
Shelf life - not less than 12 months.
* - Taking into consideration that the real need in the above medical products significantly exceeds
the number of goods for purchase and limited target budget. Applicants must submit a proposal for
the possible amount of goods within the allocated budget for the position, but not more than the
amount of the annual needs. Possible increase in the amount of the offer, please distribute by size
proportionally.