International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 October to 31 October 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
REMCO
Committee on reference materials
ISO/CD Guide 33
Reference Materials — Good practice in using reference materials
TC 17
Steel
ISO/CD 4990
Steel castings — General technical delivery requirements
ISO/CD 4991
Steel castings for pressure purposes
ISO/CD 4993
Steel and iron castings — Radiographic inspection
ISO/CD 9477
High strength cast steels for general engineering and structural purposes
ISO/CD 11970
Specification and approval of welding procedures for production welding of steel castings
ISO/CD 11972
Corrosion-resistant cast steels for general applications
ISO/CD 11973
Heat-resistant cast steels and alloys for general applications
ISO/CD 13520
Determination of ferrite content in austenitic stainless steel castings
ISO/CD 13521
Austenitic manganese steel castings
ISO/CD 13583-1
Centrifugally cast steel and alloy products — Part 1: General testing and tolerances
ISO/CD 13583-2
Centrifugally cast steel and alloy products — Part 2: Heat resistant materials
ISO/CD 14737
Cast non-alloy and low alloy steels for general applications
ISO/CD 16468
Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements
ISO/CD 19960
Cast steels and alloys with special physical properties
TC 22
Road vehicles
ISO/CD 3537
Road vehicles — Safety glazing materials — Mechanical tests
TC 29
Small tools
ISO/CD 6103
Bonded abrasive products — Permissible unbalances of grinding wheels as delivered — Static testing
TC 35
Paints and varnishes
ISO/CD 17463
Paints and varnishes — Determination of the corrosion protection properties of organic coatings by the accelerated
cyclic electrochemical technique (ACET)
TC 38
Textiles
ISO/CD 24362-1
Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of
the use of certain azo colorants accessible with and without extracting the fibres
TC 44
Welding and allied processes
ISO/CD 17916
Safety of thermal cutting machines
TC 46
Information and documentation
ISO/CD 11620
Information and documentation — Library performance indicators
ISO/DTR 14873
Information and documentation — Statistics and quality issues for web archiving
ISO/CD 16439
Methods and procedures for assessing the impact of libraries
ISO/CD 17316
Information and documentation — International standard document link
TC 89
Wood-based panels
ISO/CD 16895
Wood-based panels — Dry-process fibreboard
ISO/CD 16893
Wood-based panels — Particleboard
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 16900-12
Respiratory protective devices — Methods of test and test equipment — Part 12: Determination of volume averaged
work of breathing and peak respiratory pressures
TC 110
Industrial trucks
ISO/CD 22915-9
Industrial Trucks — Verification of stability — Part 9: Counterbalanced trucks with mast handling freight containers
of 6m (20 ft) length and longer
TC 122
Packaging
ISO/CD 21067
Packaging — Vocabulary
TC 131
Fluid power systems
ISO/CD 8132
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Mounting
dimensions for accessories
ISO/CD 8133
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Mounting dimensions for
accessories
ISO/CD 10762
Hydraulic fluid power — Cylinder mounting dimensions — 10 MPa (100 bar) series
ISO/CD 11926-1
Connections for general use and fluid power — Ports and stud ends with ISO 263 UN and UNF threads and O-ring
sealing — Part 1: Ports with truncated housing for O-ring seal
ISO/CD 11926-2
Connections for general use and fluid power — Ports and stud ends with ISO 263 inch threads and O-ring sealing
— Part 2: Heavy-duty (S series) stud ends
ISO/CD 11926-3
Connections for general use and fluid power — Ports and stud ends with ISO 263 inch threads and O-ring sealing
— Part 3: Light-duty (L series) stud ends
ISO/CD 11926-4
Connections for fluid power and general use — Ports and stud ends with ISO 263 threads and O-ring sealing —
Part 4: Dimensions, design, test methods and requirements for external and internal hex port plugs
ISO/CD 16908
Hydraulic filter element test methods — Thermal conditioning and cold start-up simulation
TC 156
Corrosion of metals and alloys
ISO/CD 16540
Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking
using the four-point bend method
TC 159
Ergonomics
ISO/CD 16418
Ergonomics of the thermal environment — Mathematical model for predicting and evaluating the dynamic human
physiological responses to the thermal environments
TC 171
Document management applications
ISO/CD 12653-3
Electronic imaging — Test target for the black-and-white scanning of office documents — Part 3: Lower resolution
applications
TC 172
Optics and photonics
ISO/CD 14132-3
Optics and optical instruments — Vocabulary for telescopic systems — Part 3: Terms for telescopic sights
ISO/CD 14135-1
Optics and optical instruments — Specifications for telescopic sights — Part 1: General-purpose instruments
ISO/CD 14135-2
Optics and optical instruments — Specifications for telescopic sights — Part 2: High-performance instruments
ISO/CD 11151-1
Lasers and laser-related equipment — Standard optical components — Part 1: Components for the UV, visible and
near-infrared spectral ranges
ISO/CD 11151-2
Lasers and laser-related equipment — Standard optical components — Part 2: Components for the infrared spectral
range
ISO/CD 17901-1
Optics and photonics — Holography — Part 1: Methods of measuring diffraction efficiency and associated optical
characteristics of holograms
ISO/CD 17901-2
Optics and photonics — Holography — Part 2: Methods for measurement of hologram recording characteristics
ISO/DTS 17915
Optics and photonics — Measuring method of semiconductor lasers for sensing
TC 185
Safety devices for protection against excessive pressure
ISO/CD 4126-11
Safety devices for protection against excessive pressure — Part 11: Performance testing
TC 199
Safety of machinery
ISO 13849-1:2006/CD
Amd 1
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design —
Amendment 1
TC 204
Intelligent transport systems
ISO/DTS 25110
Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC)
TC 210
Quality management and corresponding general aspects for medical devices
IEC/CD 62304
Medical device software — Software life cycle processes
TC 215
Health informatics
ISO/DTS 13972
Health informatics — Detailed clinical models, characteristics and processes
ISO/CD 17090-2
Health informatics — Public key infrastructure — Part 2: Certificate profile
ISO/CD 82304-1
Healthcare software systems — Part 1: General requirements
JTC 1
Information technology
ISO/IEC CD 17811-1
Device Control and Management — Part 1: Architecture
ISO/IEC CD 30121
System and software engineering — Information technology — Governance of digital forensic risk framework
ISO/IEC 144432:2010/PDAM 6
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and
signal interface — Amendment 6: PICC's with external power supply
ISO/IEC CD 17839-1
Information technology — Identification cards — Biometric system on card — Part 1: Functional architecture
ISO/IEC CD 14763-3
Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical
fibre cabling
ISO/IEC 144963:2009/PDAM 4
Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 4
DIS circulated
Period from 01 October to 31 October 2012
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4
ISO/DIS 12044
Rolling bearings
*
Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer
ring non-thrust side
2013-01-11
(Revision of ISO 12044:1995)
TC 8
ISO/DIS 8277
Ships and marine technology
*
Shipbuilding — Pipework — Information transfer
2013-01-30
(Revision of ISO 8277:1988)
ISO/DIS 17682
*
Ships and marine technology — Methodology for launching ship utilizing air bags
TC 10
Technical product documentation
ISO/DIS 129-1.2
Technical drawings — Indication of dimensions and tolerances — Part 1: General principles
2013-01-16
2012-12-11
(Revision of ISO 129-1:2004)
TC 20
ISO/DIS 16378
Aircraft and space vehicles
*
TC 23
ISO/DIS 12934-1
ISO/DIS 11783-14.3
Space systems - Measurements of thermo-optical properties of thermo control materials
2013-01-10
Tractors and machinery for agriculture and forestry
*
Tractors and machinery for agriculture and forestry — Basic types — Part 1: Definitions and
classification
2013-01-31
Tractors and machinery for agriculture and forestry — Serial control and communications data
network — Part 14: Sequence control
2012-12-11
TC 24
ISO/DIS 9276-2
Particle characterization including sieving
*
Representation of results of particle size analysis — Part 2: Calculation of average particle
sizes/diameters and moments from particle size distributions
2013-01-10
(Revision of ISO 9276-2:2001)
TC 28
ISO/DIS 10370
Petroleum products and lubricants
*
Petroleum products — Determination of carbon residue — Micro method
2013-03-19
(Revision of ISO 10370:1993, ISO 10370:1993/Cor 1:1996)
ISO/DIS 8311
*
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Calibration of
membrane tanks and independent prismatic tanks in ships — Manual and internal electrooptical distance-ranging methods
2013-03-19
(Revision of ISO 8311:1989)
TC 37
ISO/DIS 13611
Terminology and other language and content resources
*
TC 38
Interpreting — Guidelines for community interpreting
Textiles
ISO/DIS 14389
*
Textiles — Determination of the content of phthalates
ISO/DIS 15625
*
Protein fibres - Electronic test method for defects and evenness of raw silk
TC 41
ISO/DIS 10247
2013-01-30
Pulleys and belts (including veebelts)
*
Conveyor belts — Characteristics of covers — Classification
(Revision of ISO 10247:1990, ISO 10247:1990/Amd 1:2006)
TC 43
ISO
20906:2009/DAmd 1
Acoustics
*
TC 44
ISO/DIS 14114
Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports — Amendment
1
2013-01-16
Welding and allied processes
*
Gas welding equipment — Acetylene manifold systems for welding, cutting and allied
processes — General requirements
2013-03-12
(Revision of ISO 14114:1999)
TC 54
ISO/DIS 25157
Essential oils
*
TC 58
ISO/DIS 11623
Essential oil of rose, Chinese Kushui type (Rosa sertata x Rosa rugosa)
Gas cylinders
*
Gas cylinders — Composite construction — Periodic inspection and testing
2013-03-12
(Revision of ISO 11623:2002)
TC 61
ISO/DIS 15114
Plastics
*
TC 68
ISO/DIS 6166.2
Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for
unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an
effective crack length approach
2013-01-09
Financial services
*
Securities and related financial instruments — International securities identification numbering
system (ISIN)
2012-12-11
(Revision of ISO 6166:2001)
TC 86
ISO/DIS 16494
Refrigeration and air-conditioning
*
Heat recovery ventilators and energy recovery ventilators — Method of test for performance
2013-01-18
TC 89
ISO/DIS 1096
Wood-based panels
*
Plywood — Classification
2013-01-06
(Revision of ISO 1096:1999)
ISO/DIS 13608
*
Decorative veneered plywood
2013-01-06
ISO/DIS 13609
*
Blockboards and battenboards
2013-01-06
TC 91
ISO/DIS 16560
Surface active agents
*
TC 92
ISO/DIS 3008-2
Surface active agents (non-ionic) — Determination of polyethylene glycols in nonionic
ethylene-oxide-surfactants — HPLC method
2013-01-23
Fire safety
*
TC 96
Fire-resistance tests — Part 2: Lift landing door assemblies
2013-01-30
Cranes
ISO/DIS 16715
*
Cranes — Hand signals used with cranes
2013-01-30
ISO/DIS 11031
*
Cranes — Design principles for seismic loads
2013-01-11
TC 108
ISO/DIS 21940-31
Mechanical vibration, shock and condition monitoring
*
Mechanical vibration — Rotor balancing — Part 31: Susceptibility and sensitivity of machines
to unbalance
2013-01-23
(Revision of ISO 10814:1996)
TC 117
ISO/DIS 27327-2
Fans
*
Fans — Air curtain units — Part 2: Laboratory methods of testing for sound power
(Revision of ISO 13347-2:2004, ISO 13347-1:2004, ISO 13347-2:2004/Cor 1:2006, ISO
13347-1:2004/Cor 1:2006)
TC 121
ISO/DIS 80601-2-69
Anaesthetic and respiratory equipment
*
Medical Electrical Equipment — Part 2-69: Particular requirements for basic safety and
essential performance of oxygen concentrator equipment
2013-03-26
(Revision of ISO 8359:1996)
TC 131
ISO/DIS 19973-4
Fluid power systems
*
Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure
regulators
2013-01-04
(Revision of ISO 19973-4:2007)
ISO/DIS 19973-5
*
TC 135
ISO/DIS 17405
2013-01-04
Non-destructive testing
*
TC 146
ISO/DIS 16000-27
Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return
valves, shuttle valves, dual pressure valves, one-way adjustable flow control valves, quickexhaust valves
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by
welding, rolling and explosion
2013-03-05
Air quality
*
TC 147
Indoor air — Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning
electron microscopy) (direct method)
2013-01-30
Water quality
ISO/DIS 13165-2
*
Water quality — Radium 226 — Part 2: Test method using emanometry
2013-01-30
ISO/DIS 13166-1
*
Water quality — Uranium isotopes — Part 1: Test method using alpha spectrometry
2013-01-23
ISO/DIS 17994
*
Water quality — Requirements for the comparison of the relative recovery of microorganisms
by two quantitative methods
2013-03-05
(Revision of ISO 17994:2004)
TC 149
ISO/DIS 8098
Cycles
*
Cycles — Safety requirements for bicycles for young children
2013-03-05
(Revision of ISO 8098:2002)
TC 150
ISO/DIS 5841-3
Implants for surgery
*
Implants for surgery — Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for
implantable pacemakers
2013-01-16
(Revision of ISO 5841-3:2000, ISO 5841-3:2000/Cor 1:2003)
TC 156
ISO/DIS 6509
Corrosion of metals and alloys
*
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys
with zinc
2013-03-19
(Revision of ISO 6509:1981)
ISO
8044:1999/DAmd 1
*
2013-03-26
TC 171
ISO/DIS 14739-1.3
Document management applications
*
TC 172
ISO/DIS 19012-1
Corrosion of metals and alloys — Basic terms and definitions — Amendment 1
Document management — 3D use of Product Representation Compact (PRC) format — Part
1: PRC 10001
2012-12-16
Optics and photonics
*
Microscopes — Designation of microscope objectives — Part 1: Flatness of field/Plan
2013-01-09
(Revision of ISO 19012-1:2011)
TC 173
ISO/DIS 7176-1
Assistive products for persons with disability
*
Wheelchairs — Part 1: Determination of static stability
2013-01-16
(Revision of ISO 7176-1:1999)
TC 188
Small craft
ISO 122155:2008/DAmd 1
*
Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls,
design stresses, scantlings determination — Amendment 1
2013-03-05
ISO/DIS 16315
*
Small craft — Electric propulsion system
2013-03-26
TC 207
ISO/DIS 14067.2
Environmental management
*
TC 213
Carbon footprint of products — Requirements and guidelines for quantification and
communication
Dimensional and geometrical product specifications and verification
ISO/DIS 16610-60
*
Geometrical Product Specification (GPS) — Filtration — Part 60: Linear areal filters — Basic
concepts
ISO/DIS 16610-61
*
Geometrical Product Specification (GPS) — Filtration — Part 61: Linear areal filters —
Gaussian filters
TC 215
ISO/DIS 22600-1
2013-01-05
Health informatics
*
Health informatics — Privilege management and access control — Part 1: Overview and
policy management
2013-01-19
(Revision of ISO/TS 22600-1:2006)
ISO/DIS 22600-2
*
Health informatics — Privilege management and access control — Part 2: Formal models
2013-01-19
(Revision of ISO/TS 22600-2:2006)
ISO/DIS 22600-3
*
Health informatics — Privilege management and access control — Part 3: Implementations
2013-01-19
(Revision of ISO/TS 22600-3:2009)
TC 219
ISO/DIS 11856
Floor coverings
*
Textile floor coverings — Determination of fibre bind
2013-01-25
(Revision of ISO/PAS 11856:2003)
ISO/DIS 16581
*
TC 228
Resilient Floor Covering — Determination of the effect of simulated movement of a furniture
leg
2013-01-23
Tourism and related services
ISO/DIS 21101
*
Adventure tourism — Safety management systems — Requirements
2013-01-30
ISO/DIS 21103
*
Adventure tourism — Information to participants — Minimum requirements before, during and
after the adventure tourism activity
2013-01-30
ISO/DIS 24801-1
*
Recreational diving services — Requirements for the training of recreational scuba divers —
Part 1: Level 1 — Supervised diver
2013-03-05
(Revision of ISO 24801-1:2007)
ISO/DIS 24801-2
*
Recreational diving services — Requirements for the training of recreational scuba divers —
Part 2: Level 2 — Autonomous diver
2013-03-05
(Revision of ISO 24801-2:2007)
ISO/DIS 24801-3
*
Recreational diving services — Requirements for the training of recreational scuba divers —
Part 3: Level 3 — Dive leader
2013-03-05
(Revision of ISO 24801-3:2007)
ISO/DIS 24802-1
*
Recreational diving services — Requirements for the training of scuba instructors — Part 1:
Level 1
2013-03-05
(Revision of ISO 24802-1:2007)
ISO/DIS 24802-2
*
Recreational diving services — Requirements for the training of scuba instructors — Part 2:
Level 2
2013-03-05
(Revision of ISO 24802-2:2007)
IULTCS
ISO/DIS 2588
International Union of Leather Technologists and Chemists Societies
*
Leather — Sampling — Number of items for a gross sample
2013-03-05
(Revision of ISO 2588:1985)
ISO/DIS 17234-1
*
Leather — Chemical tests for the determination of certain azo colorants in dyed leathers —
Part 1: Determination of certain aromatic amines derived from azo colorants
2013-03-05
(Revision of ISO 17234-1:2010)
JTC 1
Information technology
ISO/IEC/IEEE DIS
29119-1
*
Software and systems engineering — Software testing — Part 1: Concepts and definitions
2013-01-10
ISO/IEC/IEEE DIS
29119-2.2
*
Software and systems engineering — Software testing — Part 2: Test process
2012-12-03
ISO/IEC DIS 29155-2
*
Systems and software engineering — Information technology project performance
benchmarking framework — Part 2: Requirements for benchmarking
2013-01-30
(Revision of ISO/IEC NP 29155)
ISO/IEC 1449610:2012/DAmd 2
*
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding
— Amendment 2
2013-01-10
ISO/IEC 15444-
*
Information technology — JPEG 2000 image coding system: Core coding system — Part 1:
2013-01-03
— Amendment 6: Updated ICC profile support and resolution clarification
1:2004/DAmd 6
ISO/IEC 2300012:2010/DAmd 3
*
Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive
music application format — Amendment 3
2013-01-06
ISO/IEC DIS 23001-8
*
Information technology — MPEG systems technologies — Part 8: Coding-independent codepoints
2013-01-10
ISO/IEC DIS 23002-5
*
Information technology — MPEG video technologies — Part 5: Reconfigurable media coding
conformance and reference software
2013-01-10
ISO/IEC DIS 23005-1
*
Information technology — Media context and control — Part 1: Architecture
2013-01-14
(Revision of ISO/IEC 23005-1:2011)
ISO/IEC DIS 23008-2
*
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 2: High efficiency video coding
2013-01-09
ISO/IEC DIS 23009-4
*
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 4:
Segment Encryption and Authentication
2013-01-14
FDIS circulated
Period from 01 October to 31 October 2012
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6
ISO/FDIS 22891
Paper, board and pulps
*
Paper — Determination of transmittance by diffuse reflectance measurement
2012-12-23
(Revision of ISO 22891:2007)
TC 22
ISO/FDIS 16750-3
Road vehicles
*
Road vehicles — Environmental conditions and testing for electrical and electronic equipment
— Part 3: Mechanical loads
2012-12-06
(Revision of ISO 16750-3:2007)
ISO/FDIS 20653
*
Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against
foreign objects, water and access
2012-12-11
(Revision of ISO 20653:2006)
ISO/FDIS 23274-1
*
Hybrid-electric road vehicles — Exhaust emissions and fuel consumption measurements —
Part 1: Non-externally chargeable vehicles
2012-12-11
(Revision of ISO 23274:2007)
TC 23
ISO/FDIS 16119-1
Tractors and machinery for agriculture and forestry
*
Agricultural and forestry machinery — Environmental requirements and testing for sprayers —
Part 1: General
2012-12-05
ISO/FDIS 16119-2
*
Agricultural and forestry machinery — Environmental requirements and testing for sprayers —
Part 2: Horizontal boom sprayers
2012-12-05
ISO/FDIS 16119-3
*
Agricultural and forestry machinery — Environmental requirements and testing for sprayers —
Part 3: Sprayers for bush and tree crops
2012-12-05
ISO/FDIS 13693-1
*
Irrigation equipment — Safety devices for chemigation — Part 1: Small plastics valves for
chemigation
2012-12-06
TC 34
ISO/FDIS 8586
Food products
*
Sensory analysis — General guidelines for the selection, training and monitoring of selected
assessors and expert sensory assessors
2012-12-06
(Revision of ISO 8586-1:1993, ISO 8586-2:2008)
ISO
8587:2006/FDAmd 1
*
Sensory analysis — Methodology — Ranking — Amendment 1
2012-12-25
ISO/FDIS 21572
*
Foodstuffs — Molecular biomarker analysis — Protein-based methods
2012-12-12
(Revision of ISO 21572:2004, ISO 21572:2004/Cor 1:2005)
TC 35
ISO/FDIS 11890-2
Paints and varnishes
*
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2:
Gas-chromatographic method
2013-01-26
(Revision of ISO 11890-2:2006)
ISO/FDIS 2409
*
Paints and varnishes — Cross-cut test
2012-12-26
(Revision of ISO 2409:2007)
TC 41
ISO/FDIS 21180
Pulleys and belts (including veebelts)
*
Light conveyor belts — Determination of the maximum tensile strength
2013-01-12
(Revision of ISO 21180:2005)
ISO/FDIS 21181
*
Light conveyor belts — Determination of the relaxed elastic modulus
2013-01-12
(Revision of ISO 21181:2005)
ISO/FDIS 21182
*
Light conveyor belts — Determination of the coefficient of friction
2013-01-12
(Revision of ISO 21182:2005)
TC 42
ISO/FDIS 18907
Photography
*
Imaging materials — Photographic films and papers — Wedge test for brittleness
2012-12-20
(Revision of ISO 18907:2000)
ISO/FDIS 18914
*
Imaging materials — Photographic film and papers — Method for determining the resistance of
photographic emulsions to wet abrasion
2012-12-20
(Revision of ISO 18914:2002)
ISO/FDIS 18924
*
Imaging materials — Test method for Arrhenius-type predictions
2012-12-20
(Revision of ISO 18924:2000)
ISO/FDIS 18925
*
Imaging materials — Optical disc media — Storage practices
2012-12-20
(Revision of ISO 18925:2008)
ISO/FDIS 18928
*
Imaging materials — Unprocessed photographic films and papers — Storage practices
2012-12-20
(Revision of ISO 18928:2002)
TC 43
ISO/FDIS 717-1
Acoustics
*
Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne
sound insulation
2012-12-05
(Revision of ISO 717-1:1996, ISO 717-1:1996/Amd 1:2006)
ISO/FDIS 717-2
*
Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact
sound insulation
2012-12-05
(Revision of ISO 717-2:1996, ISO 717-2:1996/Amd 1:2006)
TC 44
Welding and allied processes
ISO/FDIS 16338
*
Welding for aerospace applications — Resistance spot and seam welding
2012-12-12
ISO/FDIS 15609-6
*
Specification and qualification of welding procedures for metallic materials — Welding
procedure specification — Part 6: Laser-arc hybrid welding
2012-12-26
TC 45
ISO/FDIS 1432
Rubber and rubber products
*
Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman
test)
2012-12-11
(Revision of ISO 1432:1988, ISO 1432:1988/Cor 1:2003)
TC 54
ISO/FDIS 4719
Essential oils
*
Essential oil of spike lavender [Lavandula latifolia (L.f.) Medikus], Spanish type
2012-12-03
(Revision of ISO 4719:1999)
ISO/FDIS 4731
*
Essential oil of geranium (Pelargonium x ssp.)
2012-12-03
(Revision of ISO 4731:2006)
TC 58
ISO/FDIS 11515
Gas cylinders
*
TC 61
ISO/FDIS 6427
Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and
3000 L — Design, construction and testing
2012-12-30
Plastics
*
Plastics — Determination of matter extractable by organic solvents (conventional methods)
2012-12-20
(Revision of ISO 6427:1992)
TC 67
ISO/FDIS 27509
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
*
TC 69
ISO/FDIS 22514-6
*
Statistical methods in process management — Capability and performance — Part 6: Process
capability statistics for characteristics following a multivariate normal distribution
2012-12-03
Light metals and their alloys
*
TC 94
ISO/FDIS 6529
2012-12-05
Applications of statistical methods
TC 79
ISO/FDIS 28340
Petroleum and natural gas industries — Compact flanged connections with IX seal ring
Combined coatings on aluminium — General specifications for combined coatings of
electrophoretic organic coatings and anodic oxidation coatings on aluminium
2012-12-30
Personal safety -- Protective clothing and equipment
*
Protective clothing — Protection against chemicals — Determination of resistance of protective
clothing materials to permeation by liquids and gases
2012-12-24
(Revision of ISO 6529:2001)
TC 104
ISO/FDIS 17712
Freight containers
*
Freight containers — Mechanical seals
2012-12-24
(Revision of ISO 17712:2010)
TC 106
ISO/FDIS 20795-1
Dentistry
*
Dentistry — Base polymers — Part 1: Denture base polymers
2013-01-26
(Revision of ISO 20795-1:2008, ISO 20795-1:2008/Cor 1:2009)
TC 119
ISO/FDIS 4492
Powder metallurgy
*
Metallic powders, excluding powders for hardmetals — Determination of dimensional changes
associated with compacting and sintering
2013-01-26
(Revision of ISO 4492:1985)
TC 122
ISO/FDIS 17363
Packaging
*
Supply chain applications of RFID — Freight containers
2012-12-06
(Revision of ISO 17363:2007)
ISO/FDIS 17364
*
Supply chain applications of RFID — Returnable transport items (RTIs) and returnable
packaging items (RPIs)
2012-12-06
(Revision of ISO 17364:2009)
ISO/FDIS 17365
*
Supply chain applications of RFID — Transport units
2012-12-06
(Revision of ISO 17365:2009)
ISO/FDIS 17366
*
Supply chain applications of RFID — Product packaging
2012-12-06
(Revision of ISO 17366:2009)
ISO/FDIS 17367
*
Supply chain applications of RFID — Product tagging
2012-12-06
(Revision of ISO 17367:2009)
TC 126
ISO/FDIS 16055
Tobacco and tobacco products
*
Tobacco and tobacco products — Monitor test piece — Requirements and use
2012-12-03
(Revision of ISO 16055:2003)
ISO/FDIS 7210
*
Routine analytical cigarette-smoking machine — Additional test methods for machine
verification
2012-12-11
(Revision of ISO 7210:1997)
TC 131
ISO/FDIS 11170
Fluid power systems
*
Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter
elements
2012-12-17
(Revision of ISO 11170:2003)
ISO/FDIS 6195
*
Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating
applications — Dimensions and tolerances
2012-12-19
(Revision of ISO 6195:2002)
TC 138
ISO/FDIS 15874-2
Plastics pipes, fittings and valves for the transport of fluids
*
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2:
Pipes
2012-12-05
(Revision of ISO 15874-2:2003, ISO 15874-2:2003/Amd 1:2007)
ISO/FDIS 15874-3
*
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3:
Fittings
2012-12-05
(Revision of ISO 15874-3:2003, ISO 15874-3:2003/FDAmd 1)
ISO/FDIS 15874-5
*
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5:
Fitness for purpose of the system
2012-12-05
(Revision of ISO 15874-5:2003)
TC 150
ISO/FDIS 5838-1
Implants for surgery
*
Implants for surgery — Metallic skeletal pins and wires — Part 1: General requirements
2012-12-24
(Revision of ISO 5838-1:1995)
TC 159
ISO/FDIS 9241-154
Ergonomics
*
TC 172
ISO/FDIS 19012-2
Ergonomics of human-system interaction — Part 154: Interactive voice response (IVR)
applications
2012-12-05
Optics and photonics
*
Microscopes — Designation of microscope objectives — Part 2: Chromatic correction
2012-12-20
(Revision of ISO 19012-2:2009)
TC 180
ISO/FDIS 9459-4
Solar energy
*
TC 184
ISO/FDIS 14306
Solar heating — Domestic water heating systems — Part 4: System performance
characterization by means of component tests and computer simulation
2012-12-12
Automation systems and integration
*
Industrial automation systems and integration — JT file format specification for 3D visualization
2012-12-12
(Revision of ISO/PAS 14306:2011)
TC 188
ISO/FDIS 16180
Small craft
*
TC 202
ISO/FDIS 23833
Small craft — Navigation lights — Installation, placement and visibility
2012-12-12
Microbeam analysis
*
Microbeam analysis — Electron probe microanalysis (EPMA) — Vocabulary
2012-12-23
(Revision of ISO 23833:2006)
TC 206
Fine ceramics
ISO/FDIS 18754
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of density
and apparent porosity
(Revision of ISO 18754:2003)
ISO/FDIS 23146
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture
toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method
(Revision of ISO 23146:2008)
TC 211
ISO/FDIS 19145
Geographic information/Geomatics
*
TC 261
Geographic information — Registry of representations of geographic point location
2012-12-25
Additive manufacturing
ISO/ASTM FDIS
52915
*
Standard specification for additive manufacturing file format (AMF) Version 1.1
2013-03-27
ISO/ASTM FDIS
52921
*
Standard terminology for additive manufacturing — Coordinate systems and test methodologies
2013-03-27
JTC 1
Information technology
ISO/IEC FDIS 17963
*
Web Services for Management (WS-Management) Specification
2012-12-18
ISO/IEC 138181/FDAmd 1
*
Information technology — Generic coding of moving pictures and associated audio information:
Systems — Part 1: — Amendment 1: Extensions for simplified carriage of MPEG-4 over
MPEG-2
2012-12-25
(Revision of ISO/IEC 13818-1:2007/Amd 1:2007, ISO/IEC 13818-1:2007/DAmd 8)
ISO/IEC FDIS 1594410
ISO/IEC 197941:2011/FDAmd 1
*
Information technology — Business Operational View — Part 10: IT-enabled coded domains as
semantic components in business transactions
2012-12-23
Information technology — Biometric data interchange formats — Part 1: Framework —
Amendment 1: Conformance testing methodology
2012-12-27
Standards published
New International Standards published between 01 October and 31 October 2012
* Available in English only
** French version of standard previously published in English only
Price group
TC 6
Paper, board and pulps
ISO 6588-1:2012
Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction
D
ISO 6588-2:2012
Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction
D
TC 8
Ships and marine technology
ISO/PAS 18215:2012
*
Ships and marine technology — Vessel machinery operations in polar waters — Guidelines
E
ISO 3730:2012
*
Shipbuilding and marine structures — Mooring winches
F
ISO 16145-1:2012
*
Ships and marine technology — Protective coatings and inspection method — Part 1:
Dedicated sea water ballast tanks
R
ISO 16145-2:2012
*
Ships and marine technology — Protective coatings and inspection method — Part 2: Void
spaces of bulk carriers and oil tankers
R
ISO 16145-3:2012
*
Ships and marine technology — Protective coatings and inspection method — Part 3: Cargo oil
tanks of crude oil tankers
R
ISO 16548:2012
*
Ships and marine technology — Ship design — General guidance on emergency towing
procedures
P
ISO 11336-1:2012
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1:
Design criteria, materials, framing and testing of independent glazed openings
T
TC 17
Steel
ISO 5950:2012
*
TC 20
ISO/TR 11225:2012
Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
E
Aircraft and space vehicles
*
Space environment (natural and artificial) — Guide to reference and standard atmosphere
models
XA
ISO 26900:2012
*
TC 22
Space data and information transfer systems — Orbit data messages
V
Road vehicles
ISO 16121-1:2012
*
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses —
Part 1: General description, basic requirements
G
ISO 4164:2012
*
Mopeds — Engine test code — Net power
K
TC 23
Tractors and machinery for agriculture and forestry
ISO/TS 28923:2012
Agricultural machinery — Guards for moving parts of power transmission — Guard opening with
tool
TC 34
Food products
ISO 11132:2012
Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative
sensory panel
TC 35
Paints and varnishes
B
L
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and
size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of
degree of delamination and corrosion around a scribe or other artificial defect
D
ISO 12013-1:2012
Paints and varnishes — Determination of curing characteristics using a free damped oscillation
method — Part 1: Start temperature of the curing reaction
E
ISO 12013-2:2012
Paints and varnishes — Determination of curing characteristics using a free damped oscillation
method — Part 2: Glass transition temperature
E
ISO 15181-6:2012
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part
6: Determination of tralopyril release rate by quantitation of its degradation product in the
extract
G
ISO 15184:2012
Paints and varnishes — Determination of film hardness by pencil test
D
TC 37
Terminology and other language and content resources
ISO 4628-8:2012
ISO 24611:2012
*
*
Language resource management — Morpho-syntactic annotation framework (MAF)
U
TC 41
Pulleys and belts (including veebelts)
ISO 251:2012
Conveyor belts with textile carcass — Widths and lengths
B
ISO 5285:2012
Conveyor belts — Guidelines for storage and handling
D
TC 42
Photography
ISO 3665:2011
Photography — Intra-oral dental radiographic film and film packets — Manufacturer
specifications
E
ISO/TR 173212:2012
*
Graphic technology and photography — Colour characterization of digital still cameras (DSCs)
— Part 2: Considerations for determining scene analysis transforms
J
ISO/TS 220284:2012
*
Photography and graphic technology — Extended colour encodings for digital image storage,
manipulation and interchange — Part 4: European Colour Initiative RGB colour image encoding
[eciRGB (2008)]
J
TC 43
Acoustics
ISO 717-2:1996/Amd
1:2006
Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact
sound insulation — Amendment 1: .
XZ
ISO 101401:2010/Amd 1:2012
Acoustics — Laboratory measurement of sound insulation of building elements — Part 1:
Application rules for specific products — Amendment 1: Guidelines for the determination of the
sound reduction index of joints filled with fillers and or seals
XZ
TC 44
Welding and allied processes
ISO 8205-3:2012
Water-cooled secondary connection cables for resistance welding — Part 3: Test requirements
D
TC 45
Rubber and rubber products
ISO 1382:2012
*
Rubber — Vocabulary
ISO 18752:2012
*
Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for
hydraulic applications — Specification
H
Rubber, vulcanized — Determination of creep in compression or shear
J
Rubber, raw — Determination of water content by Karl Fischer method
D
ISO 8013:2012
ISO 12492:2012
*
TC 46
ISO/TR 17068:2012
Information and documentation
*
Information and documentation - Trusted third party repository for digital records
TC 48
Laboratory equipment
ISO 6556:2012
Laboratory glassware — Filter flasks
TC 70
Internal combustion engines
ISO 4548-7:2012
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7:
Vibration fatigue test
TC 76
Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
ISO 853612:2007/Amd 1:2012
*
TC 85
ISO/ASTM
51276:2012
XA
Infusion equipment for medical use — Part 12: Check valves — Amendment 1
P
E
C
XZ
Nuclear energy, nuclear technologies, and radiological protection
Practice for use of a polymethylmethacrylate dosimetry system
C
ISO 11665-8:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for
initial and additional investigations in buildings
K
TC 94
Personal safety -- Protective clothing and equipment
ISO 13287:2012
Personal protective equipment — Footwear — Test method for slip resistance
K
Respiratory protective devices — Methods of test and test equipment — Part 3: Determination
of particle filter penetration
E
ISO 17420-3:2012
Respiratory protective devices — Performance requirements — Part 3: Thread connection
J
TC 106
Dentistry
ISO 12836:2012
Dentistry — Digitizing devices for CAD/CAM systems for indirect dental restorations — Test
methods for assessing accuracy
TC 107
Metallic and other inorganic coatings
ISO 12671:2012
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
D
ISO 14188:2012
Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance
and thermal shock resistance for thermal barrier coatings
H
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 28927-12:2012
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12:
Die grinders
TC 122
Packaging
ISO 16900-3:2012
*
*
J
K
ISO 3394:2012
*
Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid
rectangular packages
E
ISO 3676:2012
*
Packaging — Complete, filled transport packages and unit loads — Unit load dimensions
C
TC 123
Plain bearings
ISO 4383:2012
*
Plain bearings — Multilayer materials for thin-walled plain bearings
D
ISO 4384-1:2012
*
Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials
A
ISO 4386-1:2012
*
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing
of bond of thickness greater than or equal to 0,5 mm
E
ISO 4386-2:2012
*
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for
bearing metal layer thicknesses greater than or equal to 2 mm
D
ISO 7148-1:2012
*
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of
bearing metals
F
ISO 7148-2:2012
*
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of
polymer-based bearing materials
M
TC 126
Tobacco and tobacco products
ISO 3308:2012
*
Routine analytical cigarette-smoking machine — Definitions and standard conditions
M
ISO 13110:2012
*
Cigarettes — Determination of menthol in smoke condensates — Gas-chromatographic method
D
TC 127
Earth-moving machinery
Earth-moving machinery — Machine control systems (MCS) using electronic components —
Part 2: Use and application of ISO 15998
U
ISO 6165:2012
Earth-moving machinery — Basic types — Identification and terms and definitions
F
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/TS 159982:2012
ISO/TR 27165:2012
*
*
ISO 12176-1:2012
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
B
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt
fusion
K
ISO 17467-1:2012
*
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U)
piping systems jointed by solvent cement — Part 1: General
L
ISO 17467-2:2012
*
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U)
piping systems jointed by solvent cement — Part 2: Pipes
E
ISO 17467-3:2012
*
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U)
piping systems jointed by solvent cement — Part 3: Fittings
C
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of
thermoplastics materials in pipe form by extrapolation
N
Thermoplastics pipes for the conveyance of fluids — Determination of the slow cracking
resistance of pipes and fittings using the Notched Ring Test (NRT)
L
ISO 9080:2012
ISO/TS 16479:2012
*
TC 145
Graphical symbols
ISO 7010:2011/Amd
3:2012
Graphical symbols — Safety colours and safety signs — Registered safety signs —
Amendment 3
TC 146
Air quality
ISO 13199:2012
Stationary source emissions — Determination of total volatile organic compounds (TVOCs) in
waste gases from non-combustion processes — Non-dispersive infrared analyser equipped
with catalytic converter
TC 147
Water quality
ISO 5814:2012
Water quality — Determination of dissolved oxygen — Electrochemical probe method
G
Water quality — Detection and quantification of Legionella spp. and/or Legionella pneumophila
by concentration and genic amplification by quantitative polymerase chain reaction (qPCR)
R
Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus
(Cladocera, Crustacea) — Acute toxicity test
L
ISO/TS 12869:2012
ISO 6341:2012
*
XZ
P
TC 150
Implants for surgery
ISO 13175-3:2012
Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium
phosphate bone substitutes
TC 160
Glass in building
ISO/TS 29584:2012
*
TC 163
Glass in building — Pendulum impact testing and classification of safety glass for use in
buildings
G
S
Thermal performance and energy use in the built environment
Energy performance of buildings — Common terms, definitions and symbols for the overall
energy performance rating and certification
R
ISO 10077-2:2012
Thermal performance of windows, doors and shutters — Calculation of thermal transmittance —
Part 2: Numerical method for frames
R
ISO 12575-1:2012
Thermal insulation products — Exterior insulating systems for foundations — Part 1: Material
specification
F
TC 171
Document management applications
ISO/TR 16344:2012
ISO 19005-3:2012
*
*
TC 172
ISO 9334:2012
S
Optics and photonics
*
ISO 9335:2012
ISO 13666:2012
Document management — Electronic document file format for long-term preservation — Part 3:
Use of ISO 32000-1 with support for embedded files (PDF/A-3)
*
Optics and photonics — Optical transfer function — Definitions and mathematical relationships
Q
Optics and photonics — Optical transfer function — Principles and procedures of measurement
M
Ophthalmic optics — Spectacle lenses — Vocabulary
XC
TC 173
Assistive products for persons with disability
ISO 7176-28:2012
Wheelchairs — Part 28: Requirements and test methods for stair-climbing devices
X
ISO 10542-1:2012
Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and
occupant-restraint systems — Part 1: Requirements and test methods for all systems
V
TC 178
Lifts, escalators and moving walks
ISO 18738-1:2012
Measurement of ride quality — Part 1: Lifts (elevators)
J
ISO 18738-2:2012
Measurement of ride quality — Part 2: Escalators and moving walks
H
ISO 25745-1:2012
Energy performance of lifts, escalators and moving walks — Part 1: Energy measurement and
verification
H
TC 188
Small craft
ISO 13297:2012
Small craft — Electrical systems — Alternating current installations
TC 190
Soil quality
ISO 11268-1:2012
Soil quality — Effects of pollutants on earthworms — Part 1: Determination of acute toxicity to
Eisenia fetida/Eisenia andrei
J
ISO 11268-2:2012
Soil quality — Effects of pollutants on earthworms — Part 2: Determination of effects on
reproduction of Eisenia fetida/Eisenia andrei
L
TC 199
Safety of machinery
ISO 13849-2:2012
Safety of machinery — Safety-related parts of control systems — Part 2: Validation
TC 202
Microbeam analysis
ISO 15632:2012
Microbeam analysis — Selected instrumental performance parameters for the specification and
checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
N
W
F
TC 204
Intelligent transport systems
ISO 17263:2012
Intelligent transport systems — Automatic vehicle and equipment identification — System
parameters
F
ISO/TS 174441:2012
*
Electronic fee collection — Charging performance — Part 1: Metrics
M
ISO/TS 182348:2012
*
Intelligent transport systems — Traffic and travel information via transport protocol experts
group, generation 1 (TPEG1) binary data format — Part 8: Congestion and Travel Time
application (TPEG1-CTT)
K
ISO/TR 26999:2012
*
Intelligent transport systems — Systems architecture — Use of process-oriented methodology
in ITS International Standards and other deliverables
M
TC 206
Fine ceramics
ISO 14603:2012
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for openhole tension of continuous fibre-reinforced ceramic matrix composites at room temperature
E
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of
flowability of ceramic powders
D
ISO 14629:2012
*
TC 211
ISO/TS 19158:2012
Geographic information/Geomatics
*
TC 215
ISO/HL7 10781:2009
Geographic information — Quality assurance of data supply
L
Health informatics
*
Electronic Health Record-System Functional Model, Release 1.1
XC
ISO/IEEE 1107310420:2012
Health informatics — Personal health device communication — Part 10420: Device
specialization — Body composition analyzer
U
ISO/IEEE 1107310421:2012
Health informatics — Personal health device communication — Part 10421: Device
specialization — Peak expiratory flow monitor (peak flow)
U
ISO/IEEE 1107310472:2012
Health Informatics — Personal health device communication — Part 10472: Device
specialization — Medication monitor
V
ISO/IEEE 1107330400:2012
Health informatics — Point-of-care medical device communication — Part 30400: Interface
profile — Cabled Ethernet
P
ISO 11238:2012
Health informatics — Identification of medicinal products — Data elements and structures for
the unique identification and exchange of regulated information on substances
S
ISO 11239:2012
Health informatics — Identification of medicinal products — Data elements and structures for
the unique identification and exchange of regulated information on pharmaceutical dose forms,
units of presentation, routes of administration and packaging
N
ISO 11240:2012
Health informatics — Identification of medicinal products — Data elements and structures for
the unique identification and exchange of units of measurement
T
ISO 11615:2012
Health informatics — Identification of medicinal products — Data elements and structures for
the unique identification and exchange of regulated medicinal product information
XA
ISO 11616:2012
Health informatics — Identification of medicinal products — Data elements and structures for
the unique identification and exchange of regulated pharmaceutical product information
R
ISO 13119:2012
Health informatics — Clinical knowledge resources — Metadata
L
ISO/HL7 21731:2006
*
Health informatics — HL7 version 3 — Reference information model — Release 1
XB
ISO/HL7 27931:2009
*
Data Exchange Standards — Health Level Seven Version 2.5 — An application protocol for
electronic data exchange in healthcare environments
XC
ISO/HL7 27932:2009
*
Data Exchange Standards — HL7 Clinical Document Architecture, Release 2
XC
ISO/HL7 27951:2009
*
Health informatics — Common terminology services, release 1
ISO/HL7 279531:2011
Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 1:
Framework for adverse event reporting
X
XC
ISO/HL7 279532:2011
Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 2:
Human pharmaceutical reporting requirements for ICSR
TC 216
Footwear
ISO/TS 16179:2012
Footwear — Critical substances potentially present in footwear and footwear components —
Determination of organotin compounds in footwear materials
TC 217
Cosmetics
ISO 11930:2012
Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product
TC 221
Geosynthetics
ISO 10772:2012
Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under
turbulent water flow conditions
TC 223
Societal security
ISO 22301:2012
Societal security — Business continuity management systems --- Requirements
TC 228
Tourism and related services
ISO 13293:2012
Recreational diving services — Requirements for gas blender training programmes
TC 229
Nanotechnologies
XC
F
K
E
M
E
ISO/TS 12025:2012
*
Nanomaterials — Quantification of nano-object release from powders by generation of aerosols
P
IEC/TS 62622:2012
*
Artificial gratings used in nanotechnology — Description and measurement of dimensional
quality parameters
W
TC 241
ISO 39001:2012
Road traffic safety management systems
*
Road traffic safety (RTS) management systems - Requirements with guidance for use
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 14268:2012
Leather — Physical and mechanical tests — Determination of water vapour permeability
JTC 1
Information technology
ISO/IEC 40500:2012
*
ISO/IEC
14651:2011/Amd
1:2012
Information technology — W3C Web Content Accessibility Guidelines (WCAG) 2.0
R
D
A
Information technology — International string ordering and comparison — Method for
comparing character strings and description of the common template tailorable ordering —
Amendment 1
XZ
XC
ISO/IEC 149081:2012
*
Information technology — Control network protocol — Part 1: Protocol stack
ISO/IEC 141436:2012
*
Information technology — Software measurement — Functional size measurement — Part 6:
Guide for use of ISO/IEC 14143 series and related International Standards
L
ISO/IEC 25021:2012
*
Systems and software engineering — Systems and software Quality Requirements and
Evaluation (SQuaRE) — Quality measure elements
R
ISO/IEC 25041:2012
*
Systems and software engineering — Systems and software Quality Requirements and
Evaluation (SQuaRE) — Evaluation guide for developers, acquirers and independent
evaluators
U
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-1-2:
Management and engineering guide: Generic profile group: Basic profile
S
ISO/IEC TR 29110-51-2:2011
ISO/IEC 103731:2006/Amd 1:2012
*
Identification cards — Test methods — Part 1: General characteristics — Amendment 1
XZ
ISO/IEC 103736:2011/Amd 2:2012
*
Identification cards — Test methods — Part 6: Proximity cards — Amendment 2: Test methods
for electromagnetic disturbance
XZ
ISO/IEC 116931:2012
*
Identification cards — Optical memory cards — Part 1: General characteristics
B
ISO/IEC 116941:2012
*
Identification cards — Optical memory cards — Linear recording method — Part 1: Physical
characteristics
A
ISO/IEC 27013:2012
*
Information technology — Security techniques — Guidance on the integrated implementation of
ISO/IEC 27001 and ISO/IEC 20000-1
R
Information technology — Security techniques — Guidelines for information and communication
technology readiness for business continuity
R
R
ISO/IEC 27031:2011
ISO/IEC 27037:2012
*
Information technology — Security techniques — Guidelines for identification, collection,
acquisition and preservation of digital evidence
ISO/IEC 1593812:2012
*
Information technology — Multimedia content description interface — Part 12: Query format
XC
ISO/IEC 230017:2012/Amd 1:2012
*
Information technology — MPEG systems technologies — Part 7: Common encryption in ISO
base media file format files — Amendment 1: AES-CBC-128 and key rotation
XZ
ISO/IEC 99957:2009/Amd 1:2012
*
Information technology — Keyboard layouts for text and office systems — Part 7: Symbols used
to represent functions — Amendment 1
XZ
ISO/IEC TR 130662:2012
*
Information technology — Interoperability with Assistive Technology (AT) — Part 2: Windows
accessibility application programming interface (API)
Standards confirmed
The following International Standards are confimred for a five year period:
TC 6
Paper, board and pulps
ISO 638:2008
ISO 5647:1990
(reconfirmed)
ISO 9198:2001
(reconfirmed)
ISO 7213:1981
(reconfirmed)
TC 22
Road vehicles
ISO 8720:1991
(reconfirmed)
ISO 13331:1995
(reconfirmed)
ISO 20860-1:2008
ISO 20860-2:2009
ISO 22628:2002
(reconfirmed)
TC 34
Food products
ISO 665:2000
(reconfirmed)
ISO 9289:1991
(reconfirmed)
ISO/TS 10272-2:2006
(reconfirmed)
ISO 16654:2001
(reconfirmed)
ISO 1673:1991
(reconfirmed)
X
ISO 2167:1991
(reconfirmed)
ISO 4125:1991
(reconfirmed)
ISO 5524:1991
(reconfirmed)
ISO 6755:2001
(reconfirmed)
ISO 7908:1991
(reconfirmed)
ISO 7910:1991
(reconfirmed)
TC 45
Rubber and rubber products
ISO 3011:1997
(reconfirmed)
ISO 3386-1:1986
(reconfirmed)
ISO 3386-2:1997
(reconfirmed)
ISO 3934:2002
(reconfirmed)
ISO 4633:2002
(reconfirmed)
ISO 5473:1997
(reconfirmed)
ISO 6123-3:1985
(reconfirmed)
ISO 6448:1985
(reconfirmed)
ISO 6453:1985
(reconfirmed)
ISO 6915:1991
(reconfirmed)
ISO 7229:1997
(reconfirmed)
ISO 10066:1991
(reconfirmed)
TC 54
Essential oils
ISO 770:2002
(reconfirmed)
ISO 3044:1997
(reconfirmed)
ISO 3045:2004
(reconfirmed)
ISO 3053:2004
(reconfirmed)
ISO 3063:2004
(reconfirmed)
ISO 3141:1997
(reconfirmed)
ISO 3142:1997
(reconfirmed)
ISO 3143:1997
(reconfirmed)
ISO 3216:1997
(reconfirmed)
ISO 3475:2002
(reconfirmed)
ISO 3515:2002
(reconfirmed)
ISO 3516:1997
(reconfirmed)
ISO 3518:2002
(reconfirmed)
ISO 3523:2002
(reconfirmed)
ISO 3757:2002
(reconfirmed)
ISO 3760:2002
(reconfirmed)
ISO 3809:2004
(reconfirmed)
ISO 4718:2004
(reconfirmed)
ISO 4724:2004
(reconfirmed)
ISO 4725:2004
(reconfirmed)
ISO 4730:2004
(reconfirmed)
ISO 4733:2004
(reconfirmed)
ISO 4735:2002
(reconfirmed)
ISO 7358:2002
(reconfirmed)
ISO 9843:2002
(reconfirmed)
ISO 9909:1997
(reconfirmed)
ISO 18054:2004
(reconfirmed)
ISO 21389:2004
(reconfirmed)
ISO 22972:2004
(reconfirmed)
TC 58
Gas cylinders
ISO 13338:1995
(reconfirmed)
TC 59
Buildings and civil engineering works
ISO 15686-8:2008
ISO/TS 15686-9:2008
ISO/PAS 22539:2007
TC 61
Plastics
ISO 75-3:2004
(reconfirmed)
ISO 179-2:1997
(reconfirmed)
ISO 604:2002
(reconfirmed)
ISO 6601:2002
(reconfirmed)
ISO 6721-8:1997
(reconfirmed)
ISO 6721-9:1997
(reconfirmed)
ISO 8256:2004
(reconfirmed)
ISO 17281:2002
(reconfirmed)
TC 70
Internal combustion engines
ISO 13332:2000
(reconfirmed)
ISO 8178-3:1994
(reconfirmed)
TC 113
Hydrometry
ISO 11329:2001
(reconfirmed)
TC 115
Pumps
ISO 3661:1977
(reconfirmed)
TC 117
Fans
ISO 5802:2001
(reconfirmed)
TC 123
Plain bearings
ISO 4382-1:1991
(reconfirmed)
ISO 4382-2:1991
(reconfirmed)
TC 130
Graphic technology
ISO 2836:2004
(reconfirmed)
ISO 2846-3:2002
(reconfirmed)
ISO 12640-2:2004
(reconfirmed)
ISO 15790:2004
(reconfirmed)
ISO 15930-3:2002
(reconfirmed)
TC 133
Sizing systems and designations for clothes
ISO 3636:1977
(reconfirmed)
ISO 3637:1977
(reconfirmed)
ISO 3638:1977
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 3603:1977
(reconfirmed)
ISO 8795:2001
(reconfirmed)
ISO 9852:2007
ISO 9853:1991
(reconfirmed)
ISO 11413:2008
ISO 13761:1996
(reconfirmed)
ISO 13951:2001
(reconfirmed)
ISO 13953:2001
(reconfirmed)
ISO 13968:2008
TC 147
Water quality
ISO 6107-1:2004
(reconfirmed)
ISO 6107-5:2004
(reconfirmed)
TC 149
Cycles
ISO 8488:1986
(reconfirmed)
TC 159
Ergonomics
ISO 9886:2004
(reconfirmed)
TC 160
Glass in building
ISO 25537:2008
TC 172
Optics and photonics
ISO 10934-1:2002
(reconfirmed)
TC 183
Copper, lead, zinc and nickel ores and concentrates
ISO 10258:1994
(reconfirmed)
ISO 15247:1999
(reconfirmed)
TC 199
Safety of machinery
ISO 13851:2002
(reconfirmed)
ISO 14159:2002
(reconfirmed)
TC 218
Timber
ISO 737:1975
(reconfirmed)
ISO 1029:1974
(reconfirmed)
ISO 4470:1981
(reconfirmed)
ISO 4472:1983
(reconfirmed)
ISO 4475:1989
(reconfirmed)
TC 226
Materials for the production of primary aluminium
ISO 2366:1974
(reconfirmed)
ISO 5930:1979
(reconfirmed)
ISO 5931:2000
(reconfirmed)
ISO 5938:1979
(reconfirmed)
ISO 6374:1981
(reconfirmed)
ISO 8007-1:1999
(reconfirmed)
ISO 8007-2:1999
(reconfirmed)
ISO 8658:1997
(reconfirmed)
ISO 9406:1995
(reconfirmed)
ISO 10142:1996
(reconfirmed)
ISO 10238:1999
(reconfirmed)
ISO 11713:2000
(reconfirmed)
ISO 12977:1999
(reconfirmed)
ISO 12979:1999
(reconfirmed)
ISO/TS 14423:1999
ISO/TS 14425:1999
JTC 1
ISO/IEC 15417:2007
ISO/IEC 19794-2:2005
ISO/IEC 19794-4:2005
ISO/IEC 19794-5:2005
ISO/IEC 19794-6:2005
ISO/IEC 19794-8:2006
Information technology
Standards withdrawn
Period from 01 October to 31 October 2012
TC 51
Pallets for unit load method of materials handling
ISO/TR 11444:1995
(replaced by )
TC 68
Financial services
ISO 6536:1981
(replaced by )
TC 102
Iron ore and direct reduced iron
ISO 9507:1990
(replaced by )
TC 110
Industrial trucks
ISO 509:1996
(replaced by )
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 8662-13:1997
(replaced by ISO 28927-12:2012)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 15439-1:2007
(replaced by ISO 17467-1:2012)
ISO 15439-2:2007
(replaced by ISO 17467-2:2012)
ISO 15439-3:2007
(replaced by ISO 17467-3:2012)
TC 173
Assistive products for persons with disability
ISO 7176-23:2002
(replaced by ISO 7176-28:2012)
ISO 7176-24:2004
(replaced by ISO 7176-28:2012)
TC 178
Lifts, escalators and moving walks
ISO 18738:2003
(replaced by ISO 18738-1:2012)
TC 194
Biological evaluation of medical devices
ISO/TS 20993:2006
(replaced by )
TC 213
Dimensional and geometrical product specifications and verification
ISO 4292:1985
(replaced by )
ISO 14660-1:1999
(replaced by )
JTC 1
Information technology
ISO/IEC 14598-3:2000
(replaced by ISO/IEC 25041:2012)
ISO/IEC 14598-4:1999
(replaced by ISO/IEC 25041:2012)
ISO/IEC TR 25021:2007
(replaced by ISO/IEC 25021:2012)
ISO/IEC 11693:2005
(replaced by ISO/IEC 11693-1:2012)
Meeting calendar
(update at 01 October 2012)
Meetings called for the month of November are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
December 2012
3-4
London (United
Kingdom)
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
3-5
Cochin (India)
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
3-5
Rome (Italy)
TC 147/SC 3
Water quality/Radioactivity measurements
3-7
Nairobi (Kenya)
TC 223
Societal security
7
Berlin (Germany)
TC 44/SC 12
Welding and allied processes/Soldering materials
10
Bangkok
(Thailand)
TC 221
Geosynthetics
10-12
London (United
Kingdom)
TC 158
Analysis of gases
10-14
Cambridge,
Massachusetts
(USA)
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
11-12
Jeddah (Saudi
Arabia)
TC 211
Geographic information/Geomatics
11-13
Washington, D.C
(USA)
TC 232
Learning services for non-formal education and training
13-14
Milan (Italy)
TC 270
Plastic and rubber machines
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
January 2013
7-12
London (United
Kingdom)
*
8
Berlin (Germany)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
21-25
Sydney
(Australia)
TC 248
Project committee: Sustainability criteria for bioenergy
23-24
Rio de Janeiro
(Brazil)
**
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Offshore structures
23-25
London (United
Kingdom)
*
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the
implementation of Six Sigma
28-29
Berlin (Germany)
TC 159/SC 1
Ergonomics/General ergonomics principles
February 2013
4-5
Madrid (Spain)
TC 265
Carbon dioxide capture, transportation, and geological storage
4-9
London (United
Kingdom)
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
8
St. Gallen
(Switzerland)
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
12-22
Berlin (Germany)
*
TC 213
Dimensional and geometrical product specifications and verification
18-21
Pretoria (South
Africa)
*
TC 69/SC 1
Applications of statistical methods/Terminology and symbols
20-21
Sydney
(Australia)
*
TMB
Technical Management Board
28
Montreal
(Canada)
TC 197
Hydrogen technologies
**
JTC 1/SC 35
Information technology/User interfaces
February-March 2013
25-1
(Korea, Republic
of)
March 2013
3-8
Mexico (Mexico)
*
TC 229
Nanotechnologies
11-15
Tokyo (Japan)
*
TC 210
Quality management and corresponding general aspects for medical devices
12-13
Troy (USA)
*
TC 22/SC 11
Road vehicles/Safety glazing materials
12-14
Berlin (Germany)
TC 96/SC 10
Cranes/Design principles and requirements
15
Greenville (USA)
TC 192
Gas turbines
19-22
Jeju (Korea,
Republic of)
TC 107
Metallic and other inorganic coatings
25-29
Paris (France)
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
27-28
Geneva
(Switzerland)
*
COUNCIL
Council
*
TC 85/SC 2
Nuclear energy, nuclear technologies, and radiological protection/Radiological protection
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
April 2013
2-5
Vienna (Austria)
8-10
London (United
Kingdom)
8-11
Helsinki
(Finland)
*
TC 117
Fans
8-12
Madrid (Spain)
*
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
12
Paris (France)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
16-17
Frankfurt
(Germany)
TC 48
Laboratory equipment
17-18
Xian (China)
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Pipeline transportation systems
*
22-26
Berlin (Germany)
*
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machine systems
23-24
Dresden
(Germany)
*
TC 219
Floor coverings
Paris (France)
**
TC 29/SC 5
Small tools/Grinding wheels and abrasives
Salzburg
(Austria)
**
TC 89
Wood-based panels
Shenzen (China)
**
TC 130
Graphic technology
(USA)
**
TC 178
Lifts, escalators and moving walks
(South Africa)
**
TC 242
Energy Management
*
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
TC 251
Project committee: Asset management
**
TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
April-May 2013
29-3
Sydney
(Australia)
29-3
Calgary
(Canada)
30-2
Calgary
(Canada)
May 2013
10-17
Hangzhou
(China)
**
TC 10
Technical product documentation
13-16
Chicago (USA)
**
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
13-17
(Italy)
**
TC 29
Small tools
13-17
(Italy)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
13-17
Guangzhou
(China)
*
TC 68
Financial services
13-17
Guangzhou
(China)
*
TC 68/SC 2
Financial services/Financial Services, security
13-17
Guangzhou
(China)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
13-17
Tokyo (Japan)
**
TC 114
Horology
13-17
Chicago (USA)
**
TC 195
Building construction machinery and equipment
15-16
(Japan)
**
TC 22/SC 1
Road vehicles/Ignition equipment
20-23
Durban (South
Africa)
*
TC 249
Traditional chinese medicine
21-24
Berlin (Germany)
TC 43/SC 3
Acoustics/Underwater acoustics
22-24
Stockholm
(Sweden)
**
TC 145
Graphical symbols
23-25
Moscow
(Russian
Federation)
*
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
27-31
Shanghai
(China)
*
TC 4
Rolling bearings
(Unknown)
**
TC 158
Analysis of gases
June 2013
3-4
Berlin (Germany)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
3-6
Milan (Italy)
*
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
3-7
Washington, D.C
(USA)
*
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
3-7
Paris (France)
*
TC 46/SC 11
Information and documentation/Archives/records management
3-8
Warsaw (Poland)
TC 96
Cranes
5
Prague (Czech
Republic)
**
TC 115
Pumps
6
Berlin (Germany)
*
TC 44/SC 7
Welding and allied processes/Representation and terms
6-7
Milan (Italy)
*
TC 22/SC 17
Road vehicles/Visibility
9-15
Groenkloof
(South Africa)
*
TC 37
Terminology and other language and content resources
10-14
Sydney
(Australia)
*
REMCO
Committee on reference materials
10-14
Tel Aviv (Israel)
*
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality
criteria of the service and performance indicators
11-12
(Belgium)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
11-13
Gothenburg
(Sweden)
*
TC 22
Road vehicles
11-13
Berlin (Germany)
**
TC 156
Corrosion of metals and alloys
12-13
Geneva
(Switzerland)
*
TMB
Technical Management Board
13-14
Barcelona
(Spain)
TC 91
Surface active agents
17-21
Shanghai
(China)
**
TC 121
Anaesthetic and respiratory equipment
17-21
Berlin (Germany)
**
TC 149
Cycles
18-19
Louvain-laNeuve (Belgium)
**
TC 17/SC 11
Steel/Steel castings
19-20
London (United
Kingdom)
**
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
24-28
Gaborone
(Botswana)
TC 207
Environmental management
25-26
Tokyo (Japan)
TC 17/SC 9
Steel/Tinplate and blackplate
Berlin (Germany)
**
TC 34/SC 9
Food products/Microbiology
Washington, D.C
(USA)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
Paris (France)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
(Germany)
**
TC 180
Solar energy
**
TC 34/SC 4
Food products/Cereals and pulses
*
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common
terminology
2nd Quarter 2013
(Canada)
July 2013
15-19
Paris (France)
August 2013
21-23
(USA)
**
TC 134
Fertilizers and soil conditioners
26-30
(Canada)
**
JTC 1/SC 35
Information technology/User interfaces
September 2013
7-15
Moscow
(Russian
Federation)
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
9-13
(Europe)
**
TC 21
Equipment for fire protection and fire fighting
9-13
Suzhou (China)
*
TC 61
Plastics
9-14
Stockholm
(Sweden)
*
TC 163
Thermal performance and energy use in the built environment
15-20
Ljimuden
(Netherlands)
*
TC 164
Mechanical testing of metals
16-17
St. Petersburg
(Russian
Federation)
*
DEVCO
Committee on developing countries matters
16-17
St. Petersburg
(Russian
Federation)
*
TMB
Technical Management Board
16-20
London (United
Kingdom)
*
TC 150
Implants for surgery
16-20
Fukuoka (Japan)
*
TC 190/SC 2
Soil quality/Sampling
17
Paris (France)
*
TC 254
Safety of amusement rides and amusement devices
18-20
St. Petersburg
(Russian
Federation)
*
GA
General Assembly
21
St. Petersburg
(Russian
Federation)
*
COUNCIL
Council
25-26
Oslo (Norway)
*
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
Paris (France)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
Victoria
(Canada)
**
TC 33
Refractories
Stockholm
(Sweden)
**
TC 119
Powder metallurgy
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and
testing conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Atlanta (USA)
**
TC 142
Cleaning equipment for air and other gases
(Canada)
**
TC 153/SC 1
Valves/Design, manufacture, marking and testing
Fukuoka (Japan)
**
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
(Europe)
**
TC 190/SC 7
Soil quality/Soil and site assessment
**
TC 126
Tobacco and tobacco products
3rd Quarter 2013
Istanbul (Turkey)
October 2013
1
Stuttgart
(Germany)
*
TC 165
Timber structures
7
Istanbul (Turkey)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-9
Tokyo (Japan)
*
TC 70
Internal combustion engines
7-9
Tokyo (Japan)
**
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
7-11
Istanbul (Turkey)
**
TC 38
Textiles
8
Istanbul (Turkey)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
9
Istanbul (Turkey)
**
TC 38/SC 23
Textiles/Fibres and yarns
10
Istanbul (Turkey)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Garching
(Germany)
**
TC 60
Gears
11
Garching
(Germany)
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching
(Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
11-13
(Europe)
**
CASCO
Committee on conformity assessment
14-15
Miami (USA)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
14-18
Seoul (Korea,
Republic of)
*
TC 108
Mechanical vibration, shock and condition monitoring
16-18
(Korea, Republic
of)
**
TC 123
Plain bearings
17-18
(South Africa)
**
TC 44
Welding and allied processes
18
Berlin (Germany)
*
TC 22/SC 7
Road vehicles/Injection equipment and filters for use on road vehicles
21-25
(Europe)
*
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
21-25
Bali (Indonesia)
**
TC 45
Rubber and rubber products
21-26
Berlin (Germany)
*
TC 147
Water quality
Sarajevo (Bosnia
and
Herzegovina)
**
TC 34/SC 12
Food products/Sensory analysis
(France)
**
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
Berlin (Germany)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Beijing (China)
**
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
(Japan)
**
TC 206
Fine ceramics
Carson City
(USA)
**
TC 209
Cleanrooms and associated controlled environments
November 2013
8
Paris (France)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
10
Okinawa (Japan)
**
TC 201
Surface chemical analysis
10-15
Mexico (Mexico)
*
TC 113
Hydrometry
(France)
**
JTC 1
Information technology
(Korea, Republic
of)
**
TC 106
Dentistry
Gaithersburg
(USA)
**
TC 172/SC 9
Optics and photonics/Electro-optical systems
(South Africa)
**
TC 27
Solid mineral fuels
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
Bratislava
(Slovakia)
**
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes
personnel
Porto de
Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil,
waste and drainage (including land drainage)
(Brazil)
**
TC 155
Nickel and nickel alloys
(Unknown)
**
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
(South Africa)
**
TC 202
Microbeam analysis
(Sweden)
**
TC 205
Building environment design
(Portugal)
**
TC 228
Tourism and related services
(Finland)
**
TC 257
General technical rules for determination of energy savings in renovation projects, industrial
enterprises and regions
(South America)
**
JTC 1/SC 35
Information technology/User interfaces
(Sweden)
**
TC 213
Dimensional and geometrical product specifications and verification
*
COUNCIL
Council
4th Quarter 2013
Month unknown 2013
February 2014
March 2014
27-28
Geneva
(Switzerland)
April 2014
7-11
Bologna (Italy)
*
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
8-9
(Japan)
**
TC 199
Safety of machinery
Berlin (Germany)
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
Berlin (Germany)
**
TC 34/SC 11
Food products/Animal and vegetable fats and oils
(Brazil)
**
TC 102
Iron ore and direct reduced iron
May 2014
9-16
London (United
Kingdom)
**
TC 10
Technical product documentation
12-16
London (United
Kingdom)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
15
London (United
Kingdom)
*
TC 68
Financial services
Washington, D.C
(USA)
**
TC 46/SC 11
Information and documentation/Archives/records management
**
TC 127
Earth-moving machinery
June 2014
1-6
(Sweden)
September 2014
10-12
Rio de Janeiro
(Brazil)
*
GA
General Assembly
13
Rio de Janeiro
(Brazil)
*
COUNCIL
Council
(South Africa)
**
TC 178
Lifts, escalators and moving walks
Montreal
(Canada)
**
TC 213
Dimensional and geometrical product specifications and verification