一 . 期刊論文
1.
Y. N. Wang, T. T. Lin, J. C. Leong,Y. T. Hsu, C.P. Yeh, P.H. Lee and C.H.
Tsai* ,”Numerical Investigation of High-Concentration Photovoltaic Module Heat
Dissipation,” Renewable Energy, In press (2013) (SCI, IF=2.15) (corresponding author)
2.
Yao-Nan Wang, Jik Chang Leong, Jun-Yi Chen, Shiunn-Cheng Chuang, Chien-Hsiung
Tsai *,” Reduction in Motorcyclist Pollutant Exposure Intensity by means of Optimized
Scooter front Fender and Vent Design,” Aerosol and Air Quality Research, (2013) In press
(SCI, IF=)
3.
Wei-Hsin Chen, Shan-Wen Du, Chien-Hsiung Tsai , Zhen-Yu Wang,” Torrefied biomasses in a drop tube furnace to evaluate their utility in blast furnaces,” Bioresource Technology,
111, pp. 433
–
438, (2012) (SCI, IF=)
4.
Cheng-Peng Yeh
1 、
Shan-Wen Du
、
Chien-Hsiung Tsai and Ruey-Jen Yang,” Numerical
Analysis of Flow and Combustion Behavior in Tuyere and Raceway of Blast Furnace
Fueled with Pulverized Coal and Recycled Top Gas,” , Energy 42 (2012) 233-240 (SCI,
IF=)
5.
Chien-Hsiung Tsai , Che-Hsin Lin, Lung-Ming Fu, Hui-Chun Chen,” High-performance microfluidic rectifier based on sudden expansion channel with embedded block structure,”
BIOMICROFLUIDICS 6, 024108 (2012) (SCI, IF=)
6.
C-H Tsai , C-P Yeh , C-H Lin , R-J Yang L-M Fu ,” Formation of Recirculation Zones in a
Sudden Expansion Microchannel with a Rectangular Block Structure over a Wide Reynolds
Number Range,” Microfluidics and Nanofluidics, Vol. 12, Numbers 1-4, pp.213-220,(2012)
（
SCI&EI, I.F.=2.241, 13/46
：
Nanoscience & Nanotechnology, 4/55
：
Instrument &
Instrumentation
）
7.
.-D. Tsai, Y.T. Hsu, T.T. Lin, L.-M. Fu, C.-H. Tsai , J.C. Leong,”Performance of an INER
HCPV Module in NPUST,” Energy Procedia ,14, ICAEE 2011: pp893-898 December 2011,
Bangkok, Thailand,(2012) (EI)
8.
C.-H. Tsai, J.-S. Kuo and J.C. Leong, “A Theoretical Analysis of MHD Couette Flow in
Thin Cylindrical Annulus,” Advanced Science Letters (SCI; IF =) In Press (2012)
9.
WANG Yao-Nan, LIOU Ching-Liang, WU Ming-Chang, TSAI Chien-Hsiung* , FU
Lung-Ming* ,”Rapid Detection of Methanol in an Integration Microfluidic Chip,” Key
Engineering Materials Vol. 483 (2011) pp 364-369(EI)
10.
HONG Ting-Fu, LEONG Jik-Chang, LIN LIOU Long-Kai, TSAI Chien-Hsiung* , FU
Lung-Ming*,” Magnetic Microfluidic Mixer,” Key Engineering Materials Vol. 483 (2011) pp 354-358(EI)
11.
LEE Chia-Yen, TAI Chang-Hsien, CHANG Chin-Lung, TSAI Chien-Hsiung , WANG
Yao-Nan *, FU Lung-Ming*,” Numerical Simulation of Electromagnetic Actuator for
Impedance Pumping,” Key Engineering Materials Vol. 483 (2011) pp 305-310(EI)
1

12.
TSAI C.-H., WANG Y.-N., TAI C.-H., MIAO J.-M., and LEONG J. C,”Effects of
Heating Vents in a Tunnel-Type Dryer,” Advanced Materials Research Vols. 189-193, pp
1757-1760 (EI)(2011)
13.
Lung ming Fu, Chiu feng Lin, Chin lung Chang, Jen hao Chang, and Chien hsiung
Tsai* ”Numerical Investigation into Thermal Behavior of Brushless Permanent Magnet
Motors”
Advanced Materials Research Vols. 199-200, pp 1518-1522(EI) (2011)
14.
Fu, L.M., Tsai, C.H.
, Leong, K.P. and Wen, C.Y.* "Rapid Micromixer Via
Ferrofluids" Physics Procedia , 9, 270-273, ( 2010) . (SCI_E)
15.
Yeh, C. P.
、
Tsai, C.H.
, Yang, R.J.*,”An Investigation into the Sheltering Performance of
Porous Windbreaks under Various Wind Directions,” Journal of Wind Engineering and
Industrial Aerodynamics, Vol. 98, Issues 10-11, pp.520-532 (SCI; IF =0.831) ,(2010)
16.
Hong, T.F., Ju, W.J., Leong, J.C., Tai, C.H., Tsai, C.H.* ,Fu, L.M.*,
“
Rapid
Prototyping of PMMA Microfluidic Chips Utilizing a CO
2
Laser,
”
Microfluidics and
Nanofluidics, Vol. 9, No. 6,pp. 1125-1133, (SCI; IF =3.314) (2010)
17.
Wang, Y.H., Tsai, Y.W., Tsai, C.H.
, Lee, C.Y., Fu, L.M.*
,” Design and Analysis of
Impedance Pump Utilizing Electromagnetic Actuator,” Sensors, 10, 4040-4052, (2010).
(SCI; IF =1.870)
18.
Wen, C.Y., Lee, T.L., Tsai, C.H.
, Fu, L.M.*, “Rapid Magnetic Microfluidic Mixer
Utilizing AC electromagnetic Field,” Electrophoresis , 30 , 4179-4186, (2009). (SCI; IF
=3.509)
19.
Hou, H. H., Tsai, C.H.
, Fu, L.M.*, Yang, R.J.*
*
,”Experimental and Numerical
Investigation into Micro-flow Cytometer with 3-D Hydrodynamic Focusing Effect and
Micro-Weir Structure,” Electrophoresis, 30, 2507-2515, (2009)
20.
Lee, C. Y., Hou, H. H., Tsai, C.H.* , Fu, L. M.,” Design and Characterization of
MEMS-Based Flow-Rate and Flow-Direction Microsensor,” Microfluidics and
Nanofluidics, 6, 363-371, (2009) (corresponding author)
（
SCI&EI, I.F.=2.241, 13/46
：
Nanoscience & Nanotechnology, 4/55
：
Instrument & Instrumentation
）
21.
Tsai, C.H.
, Fu, L.M., Chang, C.L., Tai, C. H., Huamg, Y.L., Leong, J.C.,”
Computational Aero-acoustic Analysis of a Passenger Car with a Rear Spoiler,”
Applied Mathematical Modelling, 33, 3661-3673 , (2009)
（
SCI&EI, I.F.=0.572, 31/67
：
Engineering, Multidisciplinary
）
22.
Lin, Che-Hsin Lee, Cheng-Yan, Tsai, C.H.
, Fu, Lung-Ming,” Novel Continuous Particle
Sorting in Microfluidic Chip Utilizing Cascaded Squeeze Effect,” Microfluidics and
Nanofluidics, 7, 499-508, (2009)
（
SCI&EI, I.F.=2.241, 13/46
：
Nanoscience &
Nanotechnology, 4/55
：
Instrument & Instrumentation
）
23.
Chen Wei-Chih, Hong Ting-Fu, Luo Wen-Bo, Tai Chang-Hsien, Tsai, C. H.* , Fu
Lung-Ming, " Electrokinetic Instability Flow in Nanofilm-Coated Microcfluidic Channels "
2

Journal of Advance Materials Research. Vol. 60-61, pp.300-303.(2009) (corresponding author) ( EI )
24.
Hsi, C.L., Wang, T.Y., Tsai, C.H.
, Liu, C.H., Chang, Y.C., Kuo, J.T.,” Characteristics of
Air-blown Fixed-bed Downdraft Biomass Gasifier,” Energy and Fuels, Vol. 22 , pp
4196–4205 (2008).
（
SCI&EI
）
25.
Fu, L.M., Hong, T. F., Wen, C. Y., Lin, C. H., Tsai, C.H.* ,”Electrokinetic instability effects in microchannels with and without nanofilm coatings,” Electrophoresis, Vol. 29, pp.
4871-4879, (2008) (corresponding author)
（
SCI&EI, I.F.=3.609, 6/70
：
Chemical,
Analytical
）
26.
Tsai, C. H., Hou, H. H., Fu, L.M.,” An Optimal Three-Dimensional Focusing Technique for Micro-Flow Cytometers,” Microfluidics and Nanofluidics,Vol: 5, pp. 827–836 , ( 2008)
（
SCI&EI, I.F.=2.241, 13/46
：
Nanoscience & Nanotechnology, 4/55
：
Instrument &
Instrumentation
）
27.
Chang, C. L., Hou, H. H., Fu, L. M., Tsai, C. H. *,
” A Low-Leakage Sample Plug
Injection Scheme for Cross-Form Microfluidic CE Devices Incorporating a Restricted
Cross-Channel Intersection,” Electrophoresis, 29, 3135-3144, (2008) (corresponding author)
（
SCI&EI, I.F.=3.609, 6/70
：
Chemical, Analytical
）
28.
Tsai, C. H. *,
” The Asymmetric Behavior of Steady Laminar Flame Propagation in
Ducts,” Combustion Science and Technology, Vol. 180, 3 , pp. 533 - 545
, (2008)
（
SCI&EI,
I.F.=0.984, 15/67
：
Engineering, Multidisciplinary
）
29.
Fu, L.M., Tsai, C. H. * , and Lin, C. H.
,”
A High-Discernment Micro-Flow Cytometer with Micro-Weir Structure
,”
Electrophoresis, 29, 1874-1878 , (2008) (corresponding author)
（
SCI&EI, I.F.=3.609, 6/70
：
Chemical, Analytical
）
30.
Chen, H. H., Huang, T. C., Tsai, C. H.
, Mujumdar, A. S.,” Development and
Performance Analysis of a New Solar Energy-Assisted Photocatalytic Dryer,” Drying
Technology, Vol. 26, pp. 503~507 , (2008)
（
SCI&EI, I.F.=1.171, 14/107
：
Engineering,
Mechanical
）
31.
Tsai, C. H., Lin, C. H., Luo, W. B., Leong, J. C., Liu, Z. J., Fu, L. M., “Rapid Analysis of Formaldehyde in Food Utilizing Microfluidic Mixer Chip,” Journal of Functional
Materials and Devices, 14, 367-371, (2008) (EI)
32.
Lao, W. B., Leong, J. C.
, Tsai, C. H., Lin ., C. H.
, Fu, L. M., “Micro Flow Cytometer with
3-D Focusing for Cell/Particle Detection,” Journal of Functional Materials and Devices, 14,
436-440, (2008) (EI)
33.
Chang, C. L., Tai, C. H., Tsai , C. H., Wang, Y. R. and Hon, Q. S., ” Numerical
Simulation of Ventilation System Within an Armored Vehicle Cabin,” Journal of Flow
Visualization & Image Processing, Vol. 14, pp. 201–223, (2007) (EI)
34.
Leong, J. C., Tsai, C. H.
, Fu, L. M., “Design of High-resolution Analysis Technique for
3

Capillary Electrophoresis Microchip,” Japanese Journal of Applied Physics, Vol. 46, No.
10A, 2007, pp. 6865–6870, (2007)
（
SCI&EI, I.F.=1.247, 50/94
：
Physics, Applied
）
35.
Leong, J. C., Tsai, C. H.
, Chang, C. L., Fu, L. M., Lin, C. F., ” A Rapid Microfluidic
Mixers Utilizing Dispersion Effect and Interactively Time-Pulsed Injection,” Japanese
Journal of Applied Physics, Vol. 46 , pp .
5345-5352 , , (2007)
（
SCI&EI, I.F.=1.247, 50/94
：
Physics, Applied
）
36.
Fu, L. M., Leong, J. C., Lin, C. F., Tai, C. H., Tsai, C. H. * , ”High Performance
Microfluidic Capillary Electrophoresis Devices,” Biomedical Microdevices, Vol. 9, pp.405-412, (2007) (corresponding author)
（
SCI&EI, I.F.=3.073, 5/44
：
Engineering,
Biomedecial, 8/46
：
Nanoscience & Nanotechnology
）
37.
Fu, L. M., Tsai, C. H. * , “Design of Interactively Time-Pulsed Microfluidic Mixers in
Microchips using Numerical Simulation,” Japanese Journal of Applied Physics,Vol. 46,
No.1 , pp.420-429, (2007) (corresponding author)
（
SCI&EI, I.F.=1.247, 50/94
：
Physics,
Applied
）
38.
Lin. C. H., Tsai, C. H. * , Pan, C. W. and Fu, L. M., “Rapid Circular Microfluidic Mixer
Utilizing Unbalance Driving Force,” Biomedical Microdevices, Vol. 9, pp.43-50 , (2007)
(corresponding author)
（
SCI&EI, I.F.=3.073, 5/44
：
Engineering, Biomedecial, 8/46
：
Nanoscience & Nanotechnology
）
39.
Tsai, C. H.
, Chen, H.T., Wang, Y. N., Lin, C. H. and Fu, L. M., “Capabilities and
Limitations of 2-Dimensinal and 3-Dimensional Numerical Methods in Modeling the Fluid
Flow in Sudden Expansion Microchannels,” Microfluidics and Nanofluidics, Vol. 3, pp.13-18 , (2007)
（
SCI&EI, I.F.=2.241, 13/46
：
Nanoscience & Nanotechnology, 4/55
：
Instrument & Instrumentation
）
40.
Huang, M. Z., Yang, R. J., Tai, C. H., Tsai, C. H. * , Fu, L. M.,
”
Application of electrokinetic instability flow for enhanced micromixing in cross-shaped microchanne,”
Biomedical Microdevices,Vol 8, pp. 309-315 , (2006) (corresponding author)
（
SCI&EI,
I.F.=3.073, 5/44
：
Engineering, Biomedecial, 8/46
：
Nanoscience & Nanotechnology
）
41.
Fu, L. M., Tai, C. H., Tsai, C. H.
, Lin, C. H., Lee, C. Y., ”Fabrication of Micromixers
Utilizing Shedding Effect Induced by Electrokinetic Instability,” Journal of Physics:
Conference Series 34, pp. 45–50, (2006) (EI)
42.
蔡建雄
,
侯輝雄
,
傅龍明 , “ 微管道流場之二维和三维涡漩仿真分析 ,” 北京科技大學學
報
,
第
28
卷
,(2006) (EI)
43.
蔡循恒
,
蔡建雄
,
張金龍
,
朱尉琮
,
林秋豐
, ”
一种簡易的指纹辨識方法 ,” 北京科技大學學
報
,
第
28
卷
,(2006) (EI)
4

44.
葉承朋
,
張金龍
,
梁智創
,
蔡建雄
* , ”
機車排氣管之數值模擬分析 ,” 北京科技大學學報
,
第
28
卷
,(2006) (corresponding author) (EI)
45.
Tai, C. H., Yang, R. J., Huang, M. Z., Liu, C. W. Tsai, C. H. * and Fu, L. M.,
“Micromixer Utilizing Electrokinetic Instability-Induced Shedding Effect,” Electrophoresis,
27, 4982-4990, (2006) (corresponding author)
（
SCI&EI, I.F.=3.609, 6/70
：
Chemical,
Analytical
）
46.
Tsai, C. H.
, Hung, M. F., Chang, C. L., Chen, L. W. and Fu, L. M., “Optimal
Configuration of Capillary Electrophoresis Microchip with Expansion Chamber in
Separation Channel,” Journal of Chromatography A , 1121, pp.120~128, (2006)
（
SCI&EI,
I.F.=3.641, 5/70
：
Chemistry, Analytical
）
47.
Tsai , C. H.
, Wang, Y. N., Lin, C. F., Yang, R. J., and Fu, L. M., ” Experimental and
Numerical Investigation into Leakage Effect in Injectors of Microfluidic Devices,”
Electrophoresis , 27, 4991-4998, (2006)
（
SCI&EI, I.F.=3.609, 6/70
：
Chemical, Analytical
）
48.
Lee, C. Y., Tsai, C. H ., Chen, L. W., Fu, L. M. and Chen, Y. C., “Elastic-Plastic
Modeling of Heat-Treated Bimorph Micro-Cantilevers,” Journal of Microsystem
Technologies,12, pp. 979~986, (2006)
（
SCI&EI, I.F.=0.912, 97/227
：
Engineering,
Electrical & Electronic
）
49.
Chen, L. W., Lee, C. Y., Tsai, C. H., and Chen, Y. C., “Thermal Contact Residual Stress
Analysis of Elastic-Plastic Bilayer Micro-Cantilevers with Platinum Electrodes,” Journal of
Material Science Forum, Vol. 505-507, 559-564(2006)
（
SCI&EI, I.F.=0.399, 10/122
：
Mechanics, 137/178
：
Materials Science
）
50.
Lee, C. Y., Lin, C. F., Hung, M. F., Ma, R. H., Tsai, C. H.
, Lin, C. H., Fu,
L.M.,“Experimental and Numerical Investigation into Mixing Efficiency of Micromixers with Different Geometric Barriers,”Journal of Material Science Forum,
Vol. 505-507,
391-396 (2006)
（
SCI&EI, I.F.=0.399, 10/122
：
Mechanics, 137/178
：
Materials Science
）
51.
Wang, Y. N., Lin, C. F., Wu, S. T., Chang, C. L., Chen, H. T., Tsai, C. H . and Fu, L. M.,”
Experimental Investigation of High-resolution Injection Technique in Microfluidic Chips,”
Journal of Material Science Forum, Vol. 505-507, 409-414 (2006)
（
SCI&EI, I.F.=0.399,
10/122
：
Mechanics, 137/178
：
Materials Science
）
52.
Tsai, C. H ., Tai, C. H., Fu, L. M. and Wu, F. B., “Experimental and Numerical Analysis of the Geometry Effects of Low-Dispersion Turns in Microfluidic Systems,” Journal of
Micromechanics and Microengineering , 15 ,377–385 . (2005)
（
SCI&EI, I.F.=1.930,
10/122
：
Mechanics, 7/55
：
Instrument & Instrumentation
）
53.
Lin, C. H., Tsai, C. H. * , and Fu, L. M.
, “
A Rapid 3-Dimensional Vortex Micromixer
5

Utilizing Self-Rotation Effect under Low Reynolds Number Conditions ,” Journal of
Micromechanics and Microengineering , 15 , 935–943 . (2005) (corresponding author)
（
SCI&EI, I.F.=1.930, 10/122
：
Mechanics, 7/55
：
Instrument & Instrumentation
）
54.
Tsai, C. H.
, Yang, R. J., Tai, C. H. and Fu, L. M., “Numerical Simulation of
Electrokinetic Injection Techniques in Capillary Electrophoresis Microchips,”
Electrophoresis , 26,674-686 , (2005)
（
SCI&EI, I.F.=3.609, 6/70
：
Chemical, Analytical
）
55.
林秋豐
,
洪敏發
,
曾全佑
,
蔡建雄
* ,
戴昌賢
,
藍浚嘉
, “
雨刷系統流場的數值分析與研究 ,”
技術學刊
,
第二十卷
, (2005) (corresponding author)
56.
曾全佑
,
蔡建雄
* ,
林秋豐
,
戴昌賢
,
吳賦斌
, “
柴油引擎噴射系統故障與噴射壓力波形之
關聯性 ,” 技術學刊
,
第二十卷
,
第一期
, pp.7-14, (2005) (corresponding author)
57.
Hsu, U. K., Tai, C. H. and Tsai, C. H.
, “All Speed and High-Resolution Scheme Applied to Three-Dimensional Multi-Block Complex Flowfield System,” Chinese Journal of
58.
Mechanics-Series A., Vol. 20, No. 1, pp.21-33, (2004)(SCI)
林秋豐
,
曾全佑
,
蔡建雄
, “
柴油車黑煙排放總量之研究 ,” 技術學刊
,
第十八卷
,
第三期
,
(2003)
59.
Tsai, C. H., and Lee, S. T., “Flame Propagation in a Rotating Tube, ” Journal of the
Chinese Institute of Engineers, Vol. 23, pp.687-695, (2000)
（
SCI&EI, I.F.=0.183, 60/67
：
Engineering, Multidisciplinary
）
60.
Lee, S. T. and Tsai, C. H.
, “Numerical Investigation of Steady Laminar Premixed Flame
Propagation in a Circular Tube,” Combustion and Flame, Vol. 99, pp.484-490, (1994)
（
SCI&EI, I.F.=2.184, 4/67
：
Engineering, Multidisciplinary
）
61.
Tsai, C. H., and Lee, S. T., “Transient Burning of a Solid Fuel,” Journal of the Chinese
Society of Mechanical Engineers, Vol. 14, No.3, pp.280~188, (1993)----------------- EI
二 . 研討會論文
1.
J.C. Leong, Y.T. Hsu, T.T. Lin , L.-M. Fu, C.-H. Tsai , B.-D. Tsai,” On-site Measurement of a HCPV Module in NPUST,” 2011 The International Conference on Green
Technologies, October 12~15, 2011, Taiwan
2.
Chien-Hsiung Tsai , Yao-Nan Wang, Chyuan-Yow Tseng , Chiu-Feng Lin and Chin-Lung
Chang,” Numerical Investigation into Thermal analysis of Brushless Permanent Magnet
Motors,” The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium &
Exhibition EVS-25 Shenzhen, China, Nov. 5-9, 2010
3.
C.P. Yeh, T.T.Lin, H.T. Pu, R.J. Yang and C.H. Tsai, ” An investigation into the passive cooling of photovoltaic cells under concentrated illumination,” The 21 st International
Symposium on Transport Phenomena, 2-5 November, 2010, Kaohsiung City, Taiwan
4.
LM Fu, CH Tsai , KP Leong, CY Wen,” Rapid Micromixer Via Ferrofluids.” The 12th
6

International Conference on Magnetic Fluids ( ICMF12 ), Sendai, Japan 1-5, August, 2010.
5.
HC Chen, CH Tsa i, LM Fu*, CH Lin, “High performance microfluidic rectifier utilizing self-induced virtual valvesin a sudden expension channel with a block structure, The 23th
IEEE International Conference on Micro Electro Mechanical Systems ( IEEE-MEMS
2010 ), Hong Kong, January 24 - 28, 2010.
6.
CH Tsai, MX Wang, CH Ta i, LM Fu*, “Experimental and Numerical Investigation into
Micro-flow Cytometer with 3-D Hydrodynamic Focusing Effect,” The 8 th
Asian Computational
Fluid Dynamics Conference ( ACFD2010 ), Hong Kong, 10-14 January, 2010.
7.
蔡建雄，陳君驛，
2010
，「機車尾流對排氣管廢氣散逸之影響」中華民國第十五屆
車輛工程學術研討會， 南台科技大學機械工程系，台灣台南，
11
月
26
日
8.
黃柏源，王政揚，蔡建雄，
2010
，「提升水流中擾流現象之裝置」中華民國第十五
屆車輛工程學術研討會， 南台科技大學機械工程系，台灣台南，
11
月
26
日
9.
蔡建雄，楊嘉豪，
2010
，「機車油冷式排
(
散
)
熱管模擬分析」中華民國第十五屆車輛
工程學術研討會， 南台科技大學機械工程系，台灣台南，
11
月
26
日
10.
蔡建雄，李朋勳，
2010
，「聚光型太陽能電池內流體不對稱性流場分析」中華民國
第十五屆車輛工程學術研討會， 南台科技大學機械工程系，台灣台南，
11
月
26
日
11.
蔡建雄，黃詠竣，
2010
「空調佈置對於書房汙染物的影響」中華民國第十五屆車輛
工程學術研討會， 南台科技大學機械工程系，台灣台南，
11
月
26
日
12.
Leong, J .C. Lee, J. S. Chen, C.D. and Tsai, C. H.
*,” Investigation of Windbreak Fence
Effectiveness on Dust Depression,” TAIWAN 2008 International Steel Technologies
Symposium (2008)
13.
CH Tsai, Lee, C. Y., Chang, C. L., Tai ,C. H., Fu ,L. M., ”Development of
High-performance Detection Method for CE Microchips,” 5 th International Symposium on
Instrument Science and Technology (ISIST2008), Shenyang, China, September 15~18,
(2008).
14.
Tsai C. H.
, Lin, C. F., Tseng, C. Y., Fu, L. M., ”Development of High-Discernment
Micro-Flow Cytometer,” 5 th International Symposium on Instrument Science and
Technology ( ISIST2008 ), Shenyang, China, September 15~18, (2008).
15.
蔡建雄
,
許智倫
,
周志明
,
張翔宇
,
郭景宗 ,” 生質燃料氣化爐與史特靈引擎之熱電共生
系統研究 ,” 2008 中國生物質能發展論壇
,
北京
(2008)
16.
杜憲文
,
蔡建雄
,
曾懿銓
“
模擬高爐熱風操作下粉煤燃燒行為之探討 ” ；第
18
屆燃燒
學術研討會
, (2008)
17.
陳 韋 志
,
蔡 建 雄
,
林 哲 信
,
傅 龍 明 , “Micro flow cytometer with 3-D focusing for cell/particle detection.” The Conference on Precision Machinery and Manufacturing
Technology 2008. (2008
精密機械與製造技術研討會
), Kenting, May 23-25, (2008).
18.
李泰龍
,
蔡建雄
,
李佳言
,
傅龍明 ,”Enhancing characteristics of gas sensors with NiO thin film.” The Conference on Precision Machinery and Manufacturing Technology 2008.
(2008
精密機械與製造技術研討會
), Kenting, May 23-25, (2008).
7

19.
侯輝雄
,
蔡建雄
,
李佳言
,
傅龍明 , “Numerical simulation of micro cantilever-based flow meter for high gas flow velocity Measurement.” The Conference on Precision Machinery and Manufacturing Technology 2008. (2008
精密機械與製造技術研討會
), Kenting, May
23-25, (2008).
20.
鄒忠明
,
蔡建雄
,
林哲信
,
傅龍明 , “Analysis of electrokinetic instability in microfluidic systems.” The Conference on Precision Machinery and Manufacturing Technology 2008.
(2008
精密機械與製造技術研討會
), Kenting, May 23-25, (2008)
21.
朱偉中
,
蔡建雄
,
林哲信
,
傅龍明 , “ Rapid analysis of formaldehyde in food utilizing microfluidic mixer chip.” The Conference on Precision Machinery and Manufacturing
Technology 2008. (2008
精密機械與製造技術研討會
), Kenting, May 23-25, (2008).
22.
陳惠君
,
傅龍明
,
蔡健雄
,
林哲信 ,” 阻塊於微流體突擴管道中低壓漩渦生成效應之分
析 ,” (2008 精密機械與製造技術研討會
), Kenting, May 23-25, (2008).
23.
侯輝雄
,
蔡建雄
,
林哲信
,
傅龍明 , ” 具有三維聚焦之微型流式細胞
/
顆粒計數儀 ,” 2007
中華民國航太學會學術研討會
, NPUST, Pingtung, November 16, ( 2007)
24.
蔡建雄
,
林哲信
,
劉展冏
,
傅龍明 , “ 應用微流體混合器晶片於食品中甲醛含量快速
檢測 ,” 2007 中華民國航太學會學術研討會
, NPUST, Pingtung, November 16, ( 2007)
25.
何順暉
,
蔡建雄
,
戴昌賢
,
陳炎洲
,
徐子圭 ,” 氫氣重組之模擬研究分析
,” 2007
中華民國航
太學會學術研討會
, ( 2007)
26.
蔡建雄
,
張明豪
“
家禽類建築物自然通風系統風擋效應之影響
,” 2007
中華民國航太
學會學術研討會
, ( 2007)
27.
杜憲文
,
蔡建雄
,
曾懿銓
“
以沉降管反應爐評估粉煤之燃燒率
,”
第十二屆車輛工程學
術研討會
, ( 2007)
28.
蔡建雄
,
葉承朋
“
機車觸媒單通道流場之數值模擬分析
,”
第十二屆車輛工程學術研討
會
, ( 2007)
29.
蔡建雄
,
蘇振權
“
史特靈引擎流場之數值模擬與研究
,”
第十二屆車輛工程學術研討會
,
( 2007)
30.
曾全佑 蔡建雄 許智翔
“
使用中機車觸媒效率測試
,”
第十二屆車輛工程學術研討會
,
( 2007)
31.
His, C. L., Tsai, C. H, , Wang, T. Y., Liu, C. H., and Kuo, J.T., ” Characteristics of
Air-blown Gasification for Woods in a Fixed-bed Downdraft Gasifier,” International
Conference on Power Engineering-2007, October 23-27, 2007, Hangzhou, China, ( 2007)
32.
Lao, W. B., Leong, J. C., Tsai, C. H.
, Lin, C. H., Fu L. M., ” Three-Dimensional
Focusing Technique for Micro-Flow Cytometers,” 9 th
Annual Domestic Conference of
Micro-Nano Technology, ShangHai, China, September 20-22,( 2007).
33.
Leong , J. C., Tsai, C. H.
, Chang, C. L., Fu, L. M., Lin, C. H., Tai, C. H., “Rapid
Formadehyde detection system in Foods,” 9 th
Annual Domestic Conference of
Micro-Nano Technology, ShangHai, China, September 20-22, ( 2007).
8

34.
Lin, C. H., Tsai, C. H.
, Lin, C. F., Fu, L. M., Tai, C. H., “Experimental Investigations into Electrokinetic Instability Phenomena in Nanofilm-Coated Microcfluidic Channels,”
International Conference on Nanoscience & Technology, ChinaNANO 2007, Beijing,
China, June 4-6.
35.
Chen, H. H., Huang, T. C. and Tsai, C. H.
, “Dehydration of Agri-food Materials by the
Concept of Green Drying,” RENEWABLE ENERGY 2006, 9-13 October, 2006 Makuhari
Messe, Chiba, Japan, Best paper Award (2006)
36.
連一洋
,
蔡建雄
,
姜庭隆
,
蘇振權
, ”
人道撲殺裝置之設計與數值模擬分析
, ” 中國機械工
程學會第二十三屆全國學術研討會
,
台南
, (2006)
37.
張金龍
,
梁智創
,
蔡建雄
,
葉承朋
, ”
機車排氣管之數值模擬分析 ,” 中國機械工程學會第
二十三屆全國學術研討會
,
台南
, (2006)
38.
梁智創
,
蔡建雄
,
潘志文
,
何忠根
,
蔡辛慈
, ”
高爐鼓風嘴流場之特性分析與研究 ,” 中國機
械工程學會第二十三屆全國學術研討會
,
台南
, (2006)
39.
Hsu, C. C., Tsai, C. H.
, Lin, C. H. and Fu, L. M., “Passive Microfluidic Mixers with
Different Geometric Barriers,” The 30th
National Conference on Theoretical and Applied
Mechanics, DYU, Changhwa, Taiwan, December 15-16, 2006.
40.
Pan, C. J., Tsai, C. H.
, Lin, C. H., Chang, C. L. and Fu, L. M.
“Rapid Circular
Microfluidic Mixer,” The 30th National Conference on Theoretical and Applied Mechanics,
DYU, Changhwa, Taiwan, December 15-16, 2006.
41.
Lin, C. C., Tsai, C. H.
and Fu, L. M., “Application of Electrokinetic Instability Flow in
Microfluidic Mixer,” The 30th
National Conference on Theoretical and Applied
Mechanics, DYU, Changhwa, Taiwan, December 15-16, 2006.
42.
Hou, H. H., Tsai, C. H.
and Fu, L. M., “Leakage Effect in Injectors of Capillary
Eelectrophoresis Microchips,” The 30th
National Conference on Theoretical and Applied
Mechanics, DYU, Changhwa, Taiwan, December 15-16, 2006.
43.
Lee, C. Y., Tsai, C. H.
, Lin, C. F. and Fu, L. M., “Development of semicircular micro-detector in microfluidic biochip, ” International Conference on
Bio-Nano-Informatics Fusion & International Forum on Biochip Technologies 2006
(BNI&IFBT2006),” Beijing, China, October 9-12, 2006
44.
Su, Y. D., Tsai, C. H.
, Lee, C. Y. and Fu, L. M., “Development of high-performance biosensor for capillary electrophoresis microchip,” 2006 USTB-NPUST International
Conference, Beijing, China, July 1-3, 2006.
45.
Huang, M. Z., Yang, R. J., Tai, C. H., Tsai, C. H.
, and Fu, L. M., “Application of instability of electrokinetic flows for enhanced micromixing in cross-shaped microchannel,” 2006 USTB-NPUST International Conference, Beijing, China, July 1-3,
2006.
46.
Lee, C. Y., Lin, C. H., Tsai, C. H.
and Fu, L. M., “Design and Fabrication of Contactless
Capacitive-Type Detector for Microchip Capillary Electrophoresis,” International MEMS
Conference (iMEMS2006), Singapore, May 9-12, 2006.
9

47.
Fu, L. M., Tai, C. H., Tsai, C. H.
, Lin, C. H. and Lee, C. Y., “Fabrication of Micromixers
Utilizing Shedding Effect Induced by Electrokinetic Instability,” International MEMS
Conference (iMEMS2006), Singapore, May 9-12, 2006
48.
Tsai, C. H.
, Lee, C. Y. and Fu, L. M.,
“Numerical Simulation of High-resolution
Analysis Technique in Capillary Electrophoresis Microchip,” The 13 th
National on
Computational Fluid Dynamics, Taipei, August 17-19, 2006.
49.
Su, Y. D., Tsai, C. H.
, Lee, C. Y., and Fu, L. M., “Development of high-performance detector for CE microchip, The 4 th
Conference on Precision Machinery and Manufacturing
Technology-(2006
精密機械與製造技術研討會
), Kenting, May 26-28, 2006.
50.
Zhong, Y. M., Tsai, C. H.
, Chang, C. L. and Fu, L. M., “High-resolution Analysis
Technique for CE Microchip,” The 4 th
Conference on Precision Machinery and
Manufacturing Technology-(2006
精密機械與製造技術研討會
), Kenting, May 26-28,
2006.
51.
Huang, M, Z., Yang, R. J., Tai, C. H., Tsai, C. H.
and Fu, L. M., “Rapid microfluidic mixer utilizing electrokinetic instability flow,” The 4 th
Conference on Precision Machinery and Manufacturing Technology-(2006
精密機械與製造技術研討會
), Kenting, May 26-28,
2006.
52.
Tsai, C. H.
, Lee, C. Y., Tai, C. H., Tseng, C. Y. and Fu, L. M., ” Numerical Simulation of High-resolution Analysis Technique in Microfluidic Chips,” The First Annual IEEE
International Conference on Nano/Micro Engineered and Molecular Systems
(IEEE-NEMS 2006), Zhuhai, China, 18-21 Jan ( 2006)
53.
Tsai, C. H.
, Wang, Y. N., Lee, C. Y., Lin, C. F., Tai, C. H. and Fu, L. M., ” Numerical and Experimental Analysis into 2-Dimensinal and 3-Dimensional Effects of Flow Field in a Sudden Expansion Microchannel,” The First Annual IEEE International Conference on
Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2006), Zhuhai, China,
18-21 Jan (2006)
54.
Tsai, C. H.
, Hu, H., Lu, Z. Y., “An Investigation of Ultralight Aircraft Propeller Design –
(I) Aerodynamic Analysis” AASRC/CCAS Joint Conference, Kaohsiung, Taiwan,
(December, 2005).
55.
Hu, H., Tsai, C. H.
, Kuo, H. E., Wang, J., “An Investigation of Ultralight Aircraft
Propeller Design – (II) Structural Analysis” AASRC/CCAS Joint Conference, Kaohsiung,
Taiwan,(December, 2005)
56.
Chen, L. W., Lee, C. Y., Tsai, C. H.
and Chen, Y. C., “Thermal Contact Residual Stress
Analysis of Elastic-Plastic Bilayer Micro-Cantilevers with Platinum Electrodes,”
Proceedings of ICAM2005: International Conference on Advanced Manufacture Nov
28 – Dec 2, Taipei, Taiwan, (2005)
57.
Lee, C. Y., Chang, C. L., Ma, R. H., Tsai, C. H.
, Lin. C. H. and Fu, L. M., “Numerical
Analysis into the Mixing Performance of Electrokinetically Pulsatile Microfluidic Mixers
Interactively Time-Pulsed Microfluidic Mixers in Microchips,” Proceedings of ICAM2005:
International Conference on Advanced Manufacture Nov 28 – Dec 2, Taipei, Taiwan,
10

(2005)
58.
Lee, C. Y., Lin, C. F.
, Hung, M. F.
, Tsai, C. H.
, Lin. C. H. and Fu, L. M., “Experimental and Numerical Investigation into Mixing Efficiency of Micromixers with Different
Geometric Barriers,” Proceedings of ICAM2005: International Conference on Advanced
Manufacture Nov 28 – Dec 2, Taipei, Taiwan, (2005)
59.
Wang, Y. N., Wu, S. T., Chen, H. T., Tsai, C. H.
, Lin, C. H. and Fu, L.M., ”
Experimental Investigation of High-resolution Injection Technique in Microfluidic Chips,”
Proceedings of ICAM2005: International Conference on Advanced Manufacture Nov 28 –
Dec 2, Taipei, Taiwan, (2005)
60.
Tsai, C. H.
, Leong, J. C. and Tai, C. H., “The Asymmetric Behavior of Flame
Propagation inside Tubes,” The Sixteenth International Symposium,on Transport
Phenomena (ISTP-16), Prague, Czech Republic, (2005)
61.
Leong, J. C., Tsai, C. H.
and Tai, C. H., “Couette Flow in a Partially Porous Curved
Channel Which is Slightly Eccentric,” The Sixteenth International Symposium,on
Transport Phenomena (ISTP-16), Prague, Czech Republic, (2005)
62.
Wang, Y. N., Lin, C. H., Tsai, C. H.
and Fu, L.M., ”Capabilities and Limitations of
2-Dimensinal and 3-Dimensional Numerical Methods in Modeling the Fluid Flow in
Sudden Expansion Microchannels,” The 29th
National Conference on Theoretical and
Applied Mechanics, NTHU, Hsinchu, Taiwan, December 16-17, 2005.
63.
Fu, L. M., Tai, C. H., Tsai, C. H., Yang, R. J. and Lin, C. H., “A Rapid DNA Digestion
System Utilizing a High-Throughput Microfluidic Mixer,” The 12 th
National on
Computational Fluid Dynamics, Kaohsiung, Taiwan, August 19-21, 2005.
64.
Fu, L.M., Yang, R. J., Lin, C. H., Tsai, C. H.
and Hsu, K. L., “Numerical and
Experimental Analysis into 2-Dimensinal and 3-Dimensional Effects of Flow Field in a
Sudden Expansion Microchannel,” The 12 th
National on Computational Fluid Dynamics,
Kaohsiung, Taiwan, August 19-21, 2005.
65.
蔡建雄
,
鄭文欽 ” 抽風扇應用於室內之流場分析 ” 第十二屆
CFD
研討會
Kaohsiung,
Taiwan, August 19-21, 2005
66.
戴昌賢
,
蔡建雄
,
林志儒
, ”
汽車車內外輻射熱流場耦合分析 ” 第十二屆
CFD
研討會
Kaohsiung, Taiwan, August 19-21, 2005
67.
Lee, C. Y., Fu, L. M., Tsai, C. H., Chen, L. W. and Chen, Y. C., “Elastic-Plastic
Modeling of Heat-Treated Bimorph Micro-Cantilevers”, Symposium on Design, Test,
Integration and Package of MEMS/MOEMS 2005, Jun. 1-3, Montreux, Switzerland,
(2005)
68.
Lin, C. H., Tsai, C. H.
and Fu, L. M., “Electrokinetic Injection Techniques in Capillary
Electrophoresis Microchips,” The 28 th Conference on Theoretical and applied Mechanics,
Taipei, 3-4 December, (2004)
69.
Lin, C. H., Tsai, C. H.
and Fu, L. M., “Optimization of Injection Technique for
Microfluidic Chips”, Asia-Pacific Conference of Transducers and Micro-Nano
Technology (APCOT MNT), Sapporo, Japan, July 4-7, (2004)
11

70.
Fu, L. M., Tsai, C. H.
and Yang, R. J., “A Novel Low Voltage-driven Control in
Electrophoresis Microchips by Traveling Electric Field”, Asia-Pacific Conference of
Transducers and Micro-Nano Technology (APCOT MNT), Sapporo, Japan, July 4-7,
(2004)
71.
Lin, C. H., Tsai, C. H. and Fu, L. M., “High-resolution injection technique for Capillary
Electrophoresis Microchips,” 精密機械與製造技術研討會
, (2004)
72.
林岳峰
,
傅龍明
,
蔡建雄
,
林哲信 , “ 微型化快速迴旋混合器之製作與分析 ” The 28 th
Conference on Theoretical and applied Mechanics, Taipei, 3-4 December, (2004)
73.
蔡建雄
,
傅龍明
,
林哲信
,
許功亮 , “ 微管道內在不同幾何形狀之障礙物混合效率分析 ”
The 21th National Conference on Mechanical Engineering (
中國機械工程學會第二十一
屆全國學術術研討會
)
，
Kaohsiung, 26-27, November, (2004)
74.
Tsai, C. H., Tai, C. H. and Fu, L. M.,
“Numerical Analysis and Experimental Estimation of Low-Dispersion Turns in Capillary Electrophoresis Microchips,” The 11 th
National on
Computational Fluid Dynamics, Taitung, Taiwan, (2004)
75.
蔡建雄
,
戴昌賢
,
張金龍
,
吳賦斌 , “ 機車的流場分析與數值研究 ,” 第
28
屆力學研討會
,
(2004)
76.
姜庭隆
,
許志鴻
,
蔡建雄 , “ 襟翼對地面效應影響的研究 ,” 航空機械工程學術研討會
,
(2004)
77.
蔡建雄
,
戴昌賢
,
林秋豐
,
曾全佑
,
吳賦斌 , “ 柴油引擎噴射系統故障與噴射壓力波形之關
聯性 ,” 第八屆車輛工程研討會
, (2003)
78.
戴昌賢
,
張金龍
,
蔡建雄
,
王玉仁
,
陳肇弘
, “
裝甲車輛乘員艙通風系統模擬 ,” 第八屆車
輛工程研討會
, (2003)
79.
戴昌賢
,
張金龍
,
蔡建雄
,
黃彥隆
,
郭俊明
,
郭宗仁
,
徐友群
, “
車輛後導流板對車體流場穩
定性分析 ,” 第八屆車輛工程研討會
, (2003)
80.
姜庭隆
,
葉盈顯
,
蔡建雄
, “
量產型
MOCVD
爐內砷化鎵沉積均勻度的數值研究 ,” 第二
十屆機械工程研討會
, (2003)
81.
Tsai, C. H.
, Chiang, T. L., Tai, C. H., Chen, C. W. and Shu, K. L., “The Behavior of
Premixed Flame Propagation in Tubes with Various Cross Section,” 20 th
National
Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers,
(2003)
82.
Tsai, C. H.
, Tai, C. H., Chang, C. L., Wu, F. B. and Chang, S. K., “The Multiplicity of
Flame Shapes in a Square Tube,” 20 th
National Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers, (2003)
83.
Tsai, C. H.
, Tai, C. H., Chiang, T. L., Chen, L.W. and Lee, W. C., “The Study of
Premixed Flame Propagationin a Rotating Tube at a Low Lewis Number”, The 26 th
National Conference on Theoretical and Applied Mechanics, (2002)
84.
Tsai, C. H.
, Chen, L. W., Tzeng, C. Y. and Lee, W. J., “Lewis Number Effect on the
Propagation of Premixed Flame”,the 19 th
National Conference on Mechanical Engineering,
12

the Chinese Society of Mechanical Engineers, (2002)
85.
Chiang, T. L., Tsai, C. H.
, Feng, G. S. and Lin, S. S., “Study on the MOCVD Epitaxy
Deposition Uniformity by a Three-Dimensional Flow Model”,The 26 th
National
Conference on Theoretical and Applied Mechanics, (2002)
86.
Chiang, T. L., Tsai, C. H.
, Lin, S. S. and Feng, G. S., “Conjugated Thermal and Flow
Analysis of the MOCVD Reactor ”,The 26 th
National Conference on Theoretical and
Applied Mechanics, (2002)
87.
Tsai, C. H.
, Lin, C. F., Tseng, C. Y. and Lan, C. C., “Investigation of the Aerodynamic
Behavior of Automotive Front Wiper,” the Sixth National Conference on Vehicle
Engineering, (2001)
88.
張曜欽
,
劉展冏
,
蔡建雄
,
陳寶川
,
謝欽城
, “
蔬果熱擴散係數之量測與數值模擬
,”
九十年
農業機械研討會
,pp. 155-156, (2001)
89.
Lin, C. F., Tseng, C. Y. and Tsai, C. H.
, “Residual Travelbility Prediction For Electrical
Vehicle,” the 18 th
National Conference on Mechanical Engineering, the Chinese Society of
Mechanical Engineers, (2001)
90.
Tseng, C. Y., Lin, C. F. and Tsai, C. H.
, “Adaptive Battery State-of-Charge Estimation for Electric Scooter,”,the 18 th
National Conference on Mechanical Engineering, the
Chinese Society of Mechanical Engineers, (2001)
91.
Tsai, C. H.
and Lee, S. T., “Flame Propagation in a Rotating Tube,” the Thirteenth
National Conference on Mechanical Engineering, the Chinese Society of Mechanical
Engineers, (1996)
92.
Tsai, C. H.
and Lee, S. T., “Numerical Investigation of Steady Laminar Premixed Flame
Propagation in a Tube with Insulate Wall,” the Tenth National Conference on Mechanical
Engineering, the Chinese Society of Mechanical Engineers, (1993)
93.
Tsai, C. H.
and Lee, S. T., “Transient Burning of Solid Fuel,” the Ninth National
Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers, pp.301~308, (1992)
94.
Tsai, C. H . and Lee, S. T., “The Effect of Thermal Diffusion on the Structure of the
Stagnation-Point Premixed Flame,” the Eighth National Conference on Mechanical
Engineering, the Chinese Society of Mechanical Engineers, pp.649~655, (1991)
13

三 . 技術報告 (產學計畫結案報告)
1.
戴昌賢
,
蔡建雄
,
” 高爐鼓風嘴及風徑區流場的特性分析與研究”中國鋼鐵股份有限
公司 委託合作研究計畫
, (2006)
2.
蔡建雄
,
”中鋼原料料堆置場防風柵模擬設計技術開發中國鋼鐵股份有限公司委託合
作研究計畫
, (2007)
3.
蔡建雄
,
梁智創
,
” 大客車風阻與引擎室散熱之研究一加一工業股份有限公司委託合
作研究計畫
, (2007)
4.
蔡建雄
,
”
96
年度酒精汽油及生質柴油污染減量效益評估
,
” 春迪車輛科技有限公司
委託合作研究計畫
, (2007)
5.
胡惠文
,
蔡建雄
,
楊榮華”底盤系統輕量化之結構剛性與碰撞強度分
,
” 金屬工業研
究發展中心委託合作研究計畫
, (2007)
四 . 專書論文
1. Fu, L. M., Tsai, C. H.,
” Electrokinetic Sample Injection,” in Dongqing Li, ed.,
Encyclopedia of Microfluidics and Nanofluidics, Springer-Verlag, Berlin, Germany, ISBN:
978-0-387-32468-5, (2008)
五 . 榮譽
1.
指導碩士班研究生何輝雄獲得學校頒發碩、博士學生研究獎（
2008,
全校第一名）
2.
指導碩士班研究生葉承朋獲得學校頒發碩、博士學生研究獎（
2008
）
3.
國立屏東科技大學
94,95,96
學年度『科技
-
著作』發表獎勵
(2005~2008)
4.
96
學年車輛工程系教學特優教師
(2007)
5.
“A Rapid 3-Dimensional
Vortex Micromixer Utilizing Self-Rotation Effect under Low
Reynolds Number Conditions,” Journal of Micromechanics and Microengineering,
15, 935-943, 2005 .
此文章獲得
ISI
近十年
, Highly Cited Papers
。
(2007)
6.
獲
Marquirs
世 界 名 人 錄 收 錄 ，
Anniversary Edition. (2007)
Who's Who in Science and Engineering, 10th
7.
指導學生張明豪參加屏東科技大學第二屆學生創意實務專題競賽佳作
(2007)
8.
“
Dehydration of AGRI-Food Materials by the Concept of Green Drying
” 文章在
Renewable Energy 2006
— 獲得
Best paper Award (2006)
9.
第十二屆全國計算流體力學學術研討會-張貼論文獎佳作
(2005)
14

10.
指導碩士班研究生吳賦斌獲得學校頒發碩、博士學生研究獎（
2005
）
11.
中華民國斐陶斐榮譽學會會員
, (1984)
12.
瑞士 NSF 計畫審查評審委員
13.
Electrophoresis, CSME , international journal of thermal science, combustion science and technology, Journal of Wind Engineering and Industrial Aerodynamics, journal of hazardous material
期刊評審委員
14.
99~102 年擔任中華民國燃燒期刊副編輯
15