KARBI ANGLONG AUTONOMOUS COUNCIL
OFFICE OF THE
EXECUTIVE ENGINEER, HOWRAGHAT DIVISION
PUBLIC HEALTH ENGINEERING DEPARTMENT
DETAILED TENDER DOCUMENT
FOR
GREATER DOKMOKA-TEKELANGJAN WATER SUPPLY
PROJECT
(SH : Labour charge for laying , fitting and fixing including commissioning of MS 350mm dia raw
water gravity main of length 490 m from intake arrangement to Treatment plant (100m for gravity
raw water main from intake arrangement to pre-sedimentation tank and 390m for gravity raw
water main from pre-sedimentation tank to treatment plant) including supplying of all necessary
valves & specials and as per approved drawing of the department for Greater Dokmoka Tekelangjan Piped water supply Project under NLCPR)
(PART – B: THE SCHEDULE OF WORKS & PRICE BID)
THE SCHEDULE OF WORKS & PRICE BID
Name of work : Labour charge for laying , fitting and fixing including commissioning of MS
350mm dia raw water gravity main of length 490 m from intake arrangement to Treatment plant
(100m for gravity raw water main from intake arrangement to pre-sedimentation tank and 390m
for gravity raw water main from pre-sedimentation tank to treatment plant) including supplying of
all necessary valves & specials and as per approved drawing of the department for Greater
Dokmoka - Tekelangjan Piped water supply Project under NLCPR
Sl.
No.
1
Specification
3
4
5
6
quantity
Earth work in excavation in foundation
trenches including refilling the quantity as
necessary after completion of works of
pipe line dressing, ramming, watering etc.
and removal of surplus earth with 50m
lead and lift upto 1.5m all complete
including dewatering as directed including
bailing out water where necessary.
(b) Blastic land, tillah soil, hard soil, soil
mixed with moram gravel and boulders
upto one man size.
2
Unit
M3
661.50
e) 350mm dia
Supplying, carrying, laying, placing in
position and fitting, fixing of CI plain ended
sluice valve all complete as directed (CID
joints will be measured and paid
seperately)
M
490.00
e) 350mm dia
Supplying, carrying, laying, placing in
position and fitting, fixing of C.I. double air
valve complete with supplying bolts, nuts
3mm thick rubber insertion etc. all
complete as directed.
Each
4
f) 350mm dia
Labour charge for carrying, laying in
position S&S, flanged, plain ended C.I.
Specials such as tees, bends, collars,
tappers and caps etc. all complete as
directed.
Each
8
Qtl
30
Each
90
Labour charge for carrying and laying in
position MS pipe in line level complete as
directed.
Providing flanged joints to double flanged
C.I. pipes and specials with testing of
joints and including supplying bolts, nuts
and 3mm thick rubber insertion sheets all
complete as directed.
i) 350mm
Rate in figure and word
7
8
Construction of brick Valve chamber
(inner dimension 90cm X 60cm) with
25mm thick 1st class brick work in cement
mortar in prop. 1:4, 75mm thick cement
concrete base in prop. 1:3:6 finished with
15cm thick cement plaster in prop. 1:3
inside wall and floor including necessary
earth work including 10cm thick precast
RCC cover in prop. 1:2:4 reinforced with
10mm dia HYSD bars @ 150mmm both
ways and fitting with (600mmx600mm)
90mm thick CI manhole cover and frame
of 25kg complete as directed and
specified.
Labour charge for carrying by head load
from motorable road
Date
Each
12
LS
Signature of Tenderer