ROMOLD Tendertext PE-Cable Chamber
03/2008
CABLE CHAMBERS .................................................................................................................................................. 2
WATERTIGHT CABLE CHAMBER ................................................................................................................................. 2
Pos. 1: Assembly and installation advices ............................................................................................................ 2
CABLE CHAMBER DN 625 .......................................................................................................................................... 2
Pos. 1: Cable chamber DN 625 ........................................................................................................................... 2
CABLE CHAMBERS DN 800 ....................................................................................................................................... 2
Pos. 1: Cable chamber DN 800, H= 44 cm .......................................................................................................... 2
Pos. 2: Cable chamber DN 800, H= 115 cm ....................................................................................................... 2
CABLE CHAMBERS DN 1000 ..................................................................................................................................... 3
Pos. 1: Cable chamber DN 1000, H= 53 cm ........................................................................................................ 3
Pos. 2: Cable chamber DN 1000, H= 110 cm ...................................................................................................... 3
Pos. 3: Cable chamber DN 1000, H= 140 cm ...................................................................................................... 3
CABLE CHAMBER DN 450 ......................................................................................................................................... 4
Pos. 1: Cable chamber DN 450 with PE-Cover ................................................................................................... 4
INLET SEALS ............................................................................................................................................................... 5
Pos. 1: Inlet seal od 32 ......................................................................................................................................... 5
Pos. 2: Inlet seal od 40 ......................................................................................................................................... 5
Pos. 3: Inlet seal od 50 ......................................................................................................................................... 5
Pos. 4: Inlet seal od 63 ......................................................................................................................................... 5
Pos. 5: Inlet seal od 75 ......................................................................................................................................... 5
Pos. 6: Inlet seal od 90 ......................................................................................................................................... 5
Pos. 7: Inlet seal od 110 ....................................................................................................................................... 5
Pos. 8: Inlet seal od 125 ....................................................................................................................................... 5
Pos. 9: Inlet seal od 160 ....................................................................................................................................... 5
COVERS DN 625 ........................................................................................................................................................ 6
Pos. 1: PE-Cover DN 625, "accessible" ............................................................................................................... 6
Pos. 2: Cover DN 625, cl. B "watertight" ............................................................................................................. 6
Pos. 3: Cover DN 625, cl. D "watertight" ............................................................................................................ 6
Pos. 4: Concrete load-distribution ring with radial seal ...................................................................................... 6
Pos. 5: PE-Construction site cover DN 625, "accessible", yellow ....................................................................... 6
COVERS 700 X 700 ..................................................................................................................................................... 6
Pos. 1: Cover 700x700 cl. B 125 .......................................................................................................................... 7
Pos. 2: Cover 700x700 cl. D 400 .......................................................................................................................... 7
1
ROMOLD Tendertext PE-Cable Chamber
03/2008
Cable chambers watertight cable chambers made of polyethylene
Pos. 1: Assembly and installation advices:
Delivery and installation of PE cable chambers according to the general standards.
All earthworks have to be calculated including excavation, levelling and accurate backfilling.
Please be advised to use plies of cohesionless material for levelling ( H => 10 cm) and
backfilling.
Every connection of cable conduit has to be absolutely watertight during this process. In case of
using a not-watertight cover, the chamber bottom must be opened up in order to ensure dripping
draining of the cable chamber. (Please follow the detailed assembly and installation advices of
the particular manufacturer).
Cable chamber DN 625
Pos. 1: Cable chamber DN 625, H= 80 cm
PE-Cable chamber DN 625, watertight, 100% virgin material without recycling content (ultimate
elongation respectively elongation at tear ≥ 200 %), horizontal reinforcement rings to secure
uplift retention. Height: 45 - 80 cm
Type: KS 63/80
System ROMOLD or equal
Cable chamber DN 800
Pos. 1: Cable chamber DN 800, H = 44 cm
PE-Cable chamber DN 625, watertight, 100% virgin material without recycling content (ultimate
elongation respectively elongation at tear ≥ 200 %), internal height 44 cm, cone ID 625,
horizontal reinforcement rings to secure uplift retention, height: 47 cm.
Note: for buried installation
Type: KS 80.63/44
System ROMOLD or equal
Cable chamber DN 800
Pos. 2: Cable chamber DN 800, H = 115 cm
PE-Cable chamber DN 800, watertight, 100% virgin material without recycling content (ultimate
elongation respectively elongation at tear ≥ 200 %), flat and corrugated bottom, with corrosionresistant steps, vertical step distance 25 cm, cone ID 625, horizontal reinforcement rings to secure
uplift retention.
Height: 90 - 115 cm.
Type: FC 80.63/115 SBS
System ROMOLD or equal
2
ROMOLD Tendertext PE-Cable Chamber
03/2008
Cable chamber DN 1000
Pos. 1: Cable chamber DN 1000, H = 53 cm
PE- Cable chamber DN 1000, watertight, 100% virgin material without recycling content
(ultimate elongation respectively elongation at tear ≥ 200 %), flat and corrugated bottom,
cone ID 625, horizontal reinforcement rings to secure uplift retention.
Height: 53 cm.
Type: KS 100.63/53
System ROMOLD or equal
Cable chamber DN 1000
Pos. 2: Cable chamber DN 1000 H = 70 cm
PE-Cable chamber DN 1000, watertight, 100% virgin material without recycling content
(ultimate elongation respectively elongation at tear ≥ 200 %), flat and corrugated bottom, with
corrosion-resistant steps, vertical step distance 25 cm, cone ID 625, horizontal reinforcement
rings to secure uplift retention.
Height: 60 - 70 cm.
Type: KS 100.63/70
System ROMOLD or equal
Cable chamber with steps DN 1000
Pos. 1: Cable chamber with steps DN 1000 H = 110 cm
PE-Cable chamber DN 1000, watertight, 100% virgin material without recycling content
(ultimate elongation respectively elongation at tear ≥ 200 %), flat and corrugated bottom, with
corrosion-resistant steps, vertical step distance 25 cm, cone ID 625, horizontal reinforcement
rings to secure uplift retention.
Height: 100 - 110 cm.
Type: KS 100.63/110 SBL
System ROMOLD or equal
Cable chamber with steps DN 1000
Pos. 2: Cable chamber with steps DN 1000 H = 140 cm
PE-Cable chamber DN 1000, watertight, 100% virgin material without recycling content
(ultimate elongation respectively elongation at tear ≥ 200 %), flat and corrugated bottom, with
corrosion-resistant steps, vertical step distance 25 cm, cone ID 625, horizontal reinforcement
rings to secure uplift retention.
Height: 115 - 140 cm.
Type: FC 100.63/140 SBL
System ROMOLD or equal
3
ROMOLD Tendertext PE-Cable Chamber
03/2008
Cable chamber DN 450
Pos. 1: Cable chamber DN 450 H = 25 cm
PE-Cable chamber DN 450, watertight, 100% virgin material without recycling content (ultimate
elongation respectively elongation at tear ≥ 200 %), with reinforced bottom. Including accessible
PE-Cover and EPDM-Seal for shift-free installation. Suitable to buried installation.
Height (including cover): 25 cm
Type: F 45/20 LD
System ROMOLD or equal
4
ROMOLD Tendertext PE-Cable Chamber
03/2008
Pos. 1: Inlet seal od 32 mm
Elastomer lip seal od = 32 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 32 mm, material: SBR
Type: IS 32
Pos. 2: Inlet seal od 40 mm
Elastomer lip seal od = 40 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 40 mm, material: SBR
Type: IS 40
Pos. 3: Inlet seal od 50 mm
Elastomer lip seal od = 50 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 50 mm, material: SBR
Type: IS 50
Pos. 4: Inlet seal od 63 mm
Elastomer lip seal od = 63 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 63 mm, material: SBR
Type: IS 63
Pos. 5: Inlet seal od 75 mm
Elastomer lip seal od = 75 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 75 mm, material: SBR
Type: IS 75
Pos. 6: Inlet seal od 90 mm
Elastomer lip seal od = 90 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 90 mm, material: SBR
Type: IS 90
Pos. 7: Inlet seal od 110 mm
Elastomer lip seal od = 110 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 110 mm, material: SBR
Type: IS 110
Pos. 8: Inlet seal od 125 mm
Elastomer lip seal od = 125 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 125 mm, material: SBR
Type: IS 125
Pos. 9: Inlet seal od 160 mm
Elastomer lip seal od = 160 mm, according to EN 681 and DIN 4060, for a flexible connection of
pipes od = 160 mm, material: SBR
Type: IS 160
5
ROMOLD Tendertext PE-Cable Chamber
03/2008
Covers DN 625
Pos. 1: PE-Cover DN 625, "accessible", watertight
PE-Cover „accessible“ DN 625, round, without ventholes, incl. EPDM-seal, with two integrated
handholds, for direct, shift-free assembly on PE-Chamber ID 625, construction height: 3 cm.
Type ROMOLD, or equal
Pos. 2: Cover DN 625, cl. B "watertight"
Cover class B 125 "watertight", DN 625, round, according to EN 124, without ventholes, lid
concrete-cast iron, lockable, for direct, shift-free assembly on PE-Chamber ID 625,
construction height: 4 cm.
Type ROMOLD, or equal
Pos. 3: Cover DN 625, cl. D "watertight"
Cover class D 400, DN 625, according to DIN 19584/EN 124, watertight with 4 interlocking
bolts, lid cast iron, for direct, shift-free assembly on road foundation, construction height: 13 cm.
Type ROMOLD, or equal
Pos. 4: Concrete load-distribution ring with radial seal
Load-distribution ring made of reinforced concrete B25, outer diameter 1050 mm,
clear opening 665 mm, construction height 160 mm, including radial seal to seal the space among
the ROMOLD PE-Chamber and the ROMOLD concrete load-distribution ring cl. D 400,
including 2 screw sleeves M 12, with shifting prevention to take up a commercial cover cl. D
400, according to DIN 19584.
Type ROMOLD, or equal
Pos. 5: PE-Construction site cover DN 625, „accessible“, yellow
PE-Construction site cover „accessible“ DN 625, round, without ventholes, with two integrated
handholds, for direct, shift-free assembly on PE-Chamber ID 625 during the construction period,
colour: bright yellow
Type ROMOLD, or equal
6
ROMOLD Tendertext PE-Cable Chamber
03/2008
ABDECKUNGEN 700 x 700
Pos. 1: Cover 700x700 class B 125
Cover 700x700, lid cast-iron, class B 125, according to EN 124, without ventholes, cover with
corrugated surface, without installation for dirt trap, clear opening 700x700 mm with supporting
frame made of concrete, outer dimension: 1050x1050 mm, inner dimension: 745x745 mm,
thickness: 150 mm, for shift-free assembly of cast iron covers 700x700 mm, class B 125 with PECover ‚LK 63’, DN 625, incl. Seal ‚ES 63 K’, suitable for ROMOLD PE-Chambers ID 625
LEB 70/70 G + LK 63 + ES 63 K + supporting frame made of concrete
Type ROMOLD, or equal
Pos. 2: Cover 700x700 class D 400
Cover 700x700, lid cast-iron, class D 400, according to EN 124, without ventholes, cover with
corrugated surface, without installation for dirt trap, clear opening 700x700 mm with supporting
frame made of concrete, outer dimension: 1050x1050 mm, inner dimension: 745x745 mm,
thickness: 150 mm, for shift-free assembly of cast iron covers 700x700 mm, class B 125 with PECover ‚LK 63’, DN 625, incl. Seal ‚ES 63 K’, suitable for ROMOLD PE-Chambers ID 625
LEB 70/70 G + LK 63 + ES 63 K + supporting frame made of concrete
Type ROMOLD, or equal
7