VITA
NAME:
Ching Shung Chang
PRESENT POSITION:
Professor
Department of Civil Engineering
University of Massachusetts
Amherst, Massachusetts 01003
DATE OF BIRTH:
December 19, 1947
EDUCATION:
B.S. Chen Kung University, Taiwan, 1969.
M.E. in Soil Mechanics,
University of South Carolina, 1971
Ph.D. in Soil Mechanics,
University of California, Berkeley, 1976
Thesis Title: "Analysis of Consolidation
of Earth and Rockfill Dams"
PROFESSIONAL REGISTRATION:
Professional Engineer
New York: License No. 057268
Massachusetts: License No. 30028
PROFESSIONAL EXPERIENCE:
9/90 to present
Professor
Department of Civil Engineering
University of Massachusetts
Amherst, MA 01003
9/82 to 7/90
Associate Professor
Department of Civil Engineering
University of Massachusetts
Amherst, MA 01003
6/79 to 9/82
Assistant Professor
Department of Civil Engineering
University of Massachusetts
Amherst, MA 01003
8/77 to 6/79
Assistant Professor
Department of Civil Engineering
State University of New York at Buffalo
Buffalo, New York 14214
6/80 to 8/80
Faculty Fellow
Transportation System Center
Department of Transportation
Cambridge, Massachusetts
1
10/76 to 6/77
Research Engineer
Department of Civil Engineering
University of California at Berkeley
Berkeley, CA 94720
PROFESSIONAL SOCIETIES:
American Society of Civil Engineers
International Society of Soil Mechanics and
Foundation Engineering
American Society of Mechanical Engineers
Transportation Research Board
Boston Society of Civil Engineers
Sigma Xi
PROFESSIONAL COMMITTEE ASSIGNMENTS:
Member, Geotechnical Committee on Computer and
Numerical Methods (ASCE), 1978 to 1987
Member, Technical Council on Computer Practices
Publications Committee (ASCE), 1985 to
1988
Member, Geotechnical Committee on Soil
Properties (ASCE), 1987 to present
Member, Geotechnical Committee on Soil Dynamics
(ASCE), 1988 to present
Member, EMD Committee on Fluids,
Subcommittee on Granular Flow
(ASCE), 1991 to 1994
Member, EMD Committee on Matrial Properties,
(ASCE), 1995 to 2001
Member, EMD Committee on Granular Matrial,
(ASCE), 2002 to present
Member, AMD Committee on Geomachanics
(ASME), 1991 to present
Chair, AMD Committee on Geomachanics
(ASME), 1995 to 2001
Member, AMD Committee on Constitutive Equations
(ASME), 1992 to present
Vice Chair, EMD Committee on Granular Matrial,
(ASCE), 2003 to 2004
Chair, EMD Committee on Granular Matrial,
(ASCE), 2005 to 2007
Vice Chair, AMD Committee on Geomachanics
(ASME), 2002 to 2003
EDITORSHIP ASSIGNMENTS:
Associate Editor of Editorial Board, Journal of Engineering Mechanics
Advisory Member of Editorial Board, Acta Mechanica Solida Sinica
2
PUBLICATIONS:
Refereed Journals:
Adeogoke, C. W., Chang, C. S., and Selig, E. T., "A Study of Analytical Models for Track Support System,"
Transportation Research Record No. 733, Mechanics of Track Support, Piles and Geotechnical Data,
Transportation Research Board, 1979, pp. 6-11.
Aihara, I., Duncan, J. M., and Chang, C. S., "Finite Element Analysis of Sheeting for Soft ground," Japanese
Society of Civil Engineers, Vol. 64, November 1979, pp. 41-47.
Chang, C. S., Espinosa, J., and Selig, E. T., "Computer Analysis of Newtown Creek Culvert," Journal of
Geotechnical Engineering, ASCE, May 1980, Vol. 106, No. GT5, pp. 531-556.
Chang, C. S., "Improved Stress Analysis for Cross-Tie Tracks," by Arnold D. Kerr, Journal of the Engineering
Mechanics, ASCE, Vol. 106, No. 3, June 1980, pp. 583-584.
Chang, C. S., Adegoke, C. W., and Selig, E. T., "GEOTRACK Model for Railroad Track Performance,"
Journal of the Geotechnical Engineering, ASCE, Vol. 106, No. GT11, November 1980, pp. 1201-1218.
Selig, E. T., and Chang, C. S., "Soil Failure Modes in Undrained Cyclic Loadings," Journal of the
Geotechnical Engineering, ASCE, Vol. 107, No. GT5, May 1981, pp. 539-551.
Selig, E. T., McVay, M. C., and Chang, C. S., "Finite Element Modeling of Buried Concrete Pipe
Installations," Transportation Research Record No. 878, Soil Structure Interaction of Subsurface Conduits,
Transportation Research Board, 1982, pp. 17-23.
Chang, C. S., Kuo, C. L., and Selig, E. T., " Pore Pressure Development During Cyclic Loading," Journal of
Geotechnical Engineering, ASCE, Vol. 109, No. 1, January 1983, pp. 103-107.
Chang, C. S., "Residual Deformation of Undrained Samples During Cyclic Loading," Journal of the
Geotechnical Engineering, ASCE, Vol. 108, No. GT4, April 1982, pp. 637-646.
Chang, C. S., and Duncan, J. M., "Theory of Consolidation for Partly Saturated Clay," International Journal
for Numerical and Analytical Methods in Geomechanics, John Wiley and Sons, Vol. 7, No. 1, January-March,
1983, pp. 39-55.
Chang, C. S., "Uncertainty of One Dimensional Consolidation Analysis," Journal of Geotechnical Engineering,
ASCE, Vol. 111, No. GT12, December 1985, pp. 1411-1425.
Chang, C. S., "Boundary Element Method in Drawdown Seepage Analysis of Earth Dams," Journal of
Computing in Civil Engineering, ASCE, Vol. 1, No. 4, April 1987, pp. 83-99.
Chang, C. S., "Boundary Element Analysis for Unconfined Seepage Problems," Journal of Geotechnical
Engineering, ASCE, Vol. 114, No. 5, May 1988, pp. 556-573.
Chang, C. S. and Whitman, R. V., "Drained Permanent Deformation of Sand Due to Cyclic Loading," Journal
of Geotechnical Engineering, ASCE, Vol. 114, No. 10, 1988, pp. 1164-1180.
Chang, C. S. and Huang, T. H., "A Constitutive Model for Jointed Rock Masses," Journal of the Chinese
Institute of Engineers, Vol. 11, No. 1, 1988, pp. 25-34.
Chang, C. S., Misra, A., and Weeraratne, S. P., "A Slip Mechanism Based Constitutive Model for Granular
Soils," Journal of Engineering Mechanics, ASCE, Vol. 115, No. 4, April 1989, pp. 790-807.
3
Chang, C. S. and Misra, A., "Theoretical and Experimental Study of Regular Packings of Granules," Journal of
Engineering Mechanics, ASCE, Vol. 115, No. 4, April 1989, pp. 704-720.
Chang, C. S. Misra, A., and Xue, J. H.,"Incremental Stress-Strain Behavior of Packings Made of Multi-sized
Particles," International Journal of Solids and Structures, Pergamon Press, Vol. 25, No. 6, 1989, pp. 665-681.
Chang, C. S., Misra, A., and Weeraratne, S. P., "Deformation Behavior of Sand in Cubical and Hollow
Cylinder Devices," International Journal for Numerical and Analytical Methods in Geomechanics, John Wiley
and Sons, Vol. 13, No. 5, 1989, pp. 493-510.
Chang, C. S., and Misra, A., "Computer Simulation and Modelling of Mechanical Properties of Particulates,"
Journal of Computer and Geotechniques, Elsevier Science Publishers, Vol. 7, No. 4, 1989, pp.269-287.
Chang, C. S., Sundaram, S. S., and Misra, A., "Initial Moduli of Particulated Mass with Frictional Contacts,"
International Journal for Numerical and Analytical Methods in Geomechanics, John Wiley and Sons, Vol.
13, No. 6, 1989, pp. 626-641.
Liao, C. L., and Chang, C. S., "Numerical Modelling for Large Deformation of Aggregates of Particles with
Meta- Stable Structures," Mathematical and Computer Modelling, Vol. 14, 1990, pp. 921-926.
Chang, C. S., "Strain Tensor and Deformation for Granular Material," Journal of Engineering Mechanics,
ASCE, Vol. 116, No.4, 1990, pp. 790-804.
Chang, C. S., and Misra, A., "Packing Structure and Mechanical Properties of Granulates," Journal of
Engineering Mechanics, ASCE. Vol. 116, No. 5, 1990, pp. 1077-1093.
Chang, C. S., and Liao, C.,"Constitutive Relations for Particulate Medium with the Effect of Particle Rotation,"
International Journal of Solids and Structures, Vol. 26, No. 4, 1990, pp. 437-453.
Chang, C. S., Misra, A., and Sundaram S. S., "Micromechanical Modelling for Behaviour of Cemented Sand
Subjected to Low Amplitude Cyclic Loading," Geotechnique, Vol. 40, No. 2, 1990, pp. 251-263.
Chang, C. S. and Misra, A., "Application of Uniform Strain Theory to Heterogeneous Granular Solids,"
Journal of Engineering Mechanics, ASCE. Vol. 116, No. 10, 1990, pp. 2310-2328.
Liao, C. L. and Chang, C. S., "On the Accuracy of Direct Integration Methods for Structural Dynamics,"
Journal of the Chinese Institute of Engineers, Vol. 13, No. 5, 1990, pp. 479-490.
Chang, C. S. and Ma Lun., "Modelling of Discrete Granulates as Micropolar Continuum," Journal of
Engineering Mechanics, ASCE. Vol. 116, No. 12, 1990, pp. 2703-2721.
Liao, C. L., and Chang, C. S., "A Micro-Structural Finite Element Model for Granular Solids," Journal of
Engineering Computations, Vol. 9, No. 2, Pineridge Press Ltd., Swansea, U.K. 1992, pp. 267-276.
Chang, C. S., Misra, A., and Sundaram S. S., "Properties of Granular Packings under Low Amplitude Cyclic
Loading," International Journal of Soil Dynamics and Earthquake Engineering, Vol. 10, No. 4, 1991, pp.
201-211.
Chang, C. S., and Ma, L., "A Micromechanical-Base Micro-polar Theory for Deformation of Granular Solids,"
International Journal of Solids and Structures, Vol. 28, No. 1, 1991, pp. 67-86.
Chang, C. S., and Ma, L., "Elastic Material Constants for Isotropic Granular Solids with Particle Rotation,"
International Journal of Solids and Structures, Pergamon Press, Vol. 29, No. 8, 1992, pp. 1001-1018.
4
Chang, C. S., and Chao, S., "Discrete Element Method for Problems of Bearing Capacity," Journal of
Computers and Geotechniques, Elsevier Science Publishers, Crown House, England, Vol. 12, No. 4, 1991, pp.
273-288.
Chang, C. S., "A Discrete Element Method for Slope Stability Analysis," Journal of Geotechnical Engineering,
ASCE, Vol. 118, No. 12, 1992, pp. 1889-1906.
Chang, C. S., Misra, A., and Acheampon, K., "Elastoplastic Deformation of Granulates with Frictional
Contacts," Journal of Engineering Mechanics, ASCE, Vol. 118, No. 8, 1992, pp. 1692-1708.
Chang, C. S., Chang, Y., and Kabir, M., "Micromechanics Modelling for the Stress-Strain Behavior of
Granular Soil - I: Theory," Journal of Geotechnical Engineering, ASCE, Vol. 118, No. 12, 1992, 1959-1974.
Chang, C. S., Kabir, M., and Chang, Y., "Micromechanics Modelling for the Stress-Strain Behavior of
Granular Soil - II: Evaluation," Journal of Geotechnical Engineering, ASCE, Vol. 118, No. 12, 1992, pp.
1975-1994.
Chang, C. S., "Micromechanics Modeling for Deformation and Failure of Granulates with Frictional Contacts,"
Mechanics of Material, Elsevier Science Publishers, Amsterdam, Vol. 16, No.1-2, 1993, pp. 13-24.
Misra, A. and Chang, C. S., "Effevtive Elastic Moduli of Heterogeneous Granular Solids," International
Journal of Solids and Structures, Pergamon Press, Vol. 30, No. 18, 1993, pp. 2547-2566.
Chang, C. S., and Liao, C. L., "Estimates of elastic modulus for media of randomly packed granules," Applied
Mechanics Reviews, ASME, Vol. 47, No. 1, Part 2, 1994, pp. 197-206.
Ma, L. and Chang, C. S., "Pressure Excerted on Soil Due to Rocking of Liquid Storage Tank," Journal of
Geotechnical Engineering, ASCE, Vol. 119, No. 11, 1994, pp. 1679-1695.
Chang, C. S., and Chao, S., "Discrete Element Analysis for Active and Passive Pressure Distribution on
Retaining Wall," Journal of Computers and Geotechniques, Elsevier Science Publishers, Crown House,
England, Vol. 16, 1994, pp. 291-310.
Chang, C. S., Chao, S. C., and Chang Y., "Estimates of Mechanical Properties of Granulates with Anisotropic
Random Packing Structure," International Journal of Solids and Structures, Pergamon Press, Vol. 32, No. 14,
1995, pp. 1989-2008.
Chang, C. S., and Gao, J., "Second-Gradient Constitutive Theory for Granular Material with Random Packing
Structure," International Journal of Solids and Structures, Pergamon Press, Vol. 32, No. 16, 1995, pp. 22792293.
Chang, C. S. and Gao, J., "Non-linear Dispersion of Plane Wave in Granular Media," International Journal of
Non-linear Mechanics, Vol. 30, No. 2, 1995, pp. 111-128.
Huang, T. H., Chang, C. S., and Yang, Z. Y., "Elastic Moduli for Fractured Rock Mass," International Journal
for Rock Mechanics and Rock Engineering, Springer-Verlag, Vol. 28, No.3, 1995, pp135-144.
Chang, C. S., and Chang, Y., "Green's Function for Elastic Medium with General Anisotropy," Journal of
Appled Mechanics, Transactions of the ASME, Vol. 62, No. 3, 1995, pp. 573-578.
Chang, C. S., and Gao, J., "Kinematic and Static Hypotheses for Constitutive Modelling of Granulates
Considering Particle Rotation," Acta Mechanica, Springer-Verlag, Vol. 115, No. 1-4, 1996, pp.213-229.
5
Zhu, H., Chang, C. S. and Rish, J. W, "Tangential and Normal Compliance for Conforming Binder Contact. I:
Elastic Binder," International Journal of Solids and Structures, Pergamon Press, Vol. 33 , No. 29, 1996, pp.
4337-4349.
Zhu, H., Chang, C. S. and Rish, J. W, "Tangential and Normal Compliance for Conforming Binder Contact. II:
Visco-Elastic Binder," International Journal of Solids and Structures, Pergamon Press, Vol. 33, No. 29, 1996,
pp. 4351-4363.
Chang, C. S. and Gao, J., “Wave Propagation in a Granular Rod Using High-Gradient Theory,” Journal of
Engineering Mechanics, ASCE , Vol. 123, No. 1, 1997, pp. 52-59.
Emeriault, F. and Chang, C.S., “ Interparticle Forces and Displacements in granular Materials,” Computers and
Geotechnics, Elsevier Publication, Vol. 20, No. 3 / 4, , 1997, pp. 223-244.
Emeriault, F. and Chang, C.S., “Anisotropic Elastic Moduli of Granular Assemblies from
Micromechanical
Approach,” Journal of Engineering Mechanics, ASCE Publication, Vol. 123, No. 12, 1997, pp. 1289-1293.
Chang, C. S. and Gao, J., “Rheological Modeling of Randomly Packed Granues with Visco-Elastic Binders of
Maxwell Type,” Computer and Geotechnique, Elsevier Publication, Vol. 21, No. 1, 1997, pp. 41- 63.
Zhu, H. and Chang, C.S., “Rolling Compliance for conforming binder contact,” International Journal of Solids
and Structures, Pergamon Press, Vol. 34, Nos. 31-32, 1997, pp. 4073-4086.
Liao, C. L., Chang T. P., Young D. and Chang C. S., “Stress-strain Relationship for Granular Materials Bases on
Hypothesis of Best Fit,” International Journal of Solids and Structures, Pergamon Press, Vol. 34, Nos. 31-32,
1997, pp. 4087-4100.
Zhong, X. and Chang, C. S., “Fracture Analysis of Cementituous Granular Materials,” Recent Development in
Fracture Sensing and Analysis, Editor R. Gao, AMD- Vol. 971, UMA Press, 1998, pp. 24-29.
Chang, C. S., “Modeling of Granular Materials with Intrinsic Length Scale,” Journal de Physique IV, Vol. 8,
Pr. 8, 1998, EDP Sciences, de Courtaboeuf, France, pp. 71-78.
Chang, C. S., Gao, J., and Zhong, X., “High-Gradient Modeling for Love Wave Propagation in Granular
Material,” Journal of Engineering Mechanics, ASCE Publication, Vol. 124, No. 12, 1998, pp. 1354-1360.
Chang, C. S., Shi, Q., and Zhu, H., “Micro-mechanical Modeling for Elastic Moduli of Bonded Granules,”
Journal of Engineering Mechanics, ASCE Publication, Vol. 125, No. 6, 1999, pp. 648-653.
Suiker, A.S.J., Chang, C.S., “Application of Higher Order Tensor Theory for Formulating Enhanced
Continuum Models,” Acta Mechanica, Springer-Verlag, Vol. 142, 2000, pp.223-234.
Suiker, A.S.J., Chang, C.S., deBorst, R, and Esveld, C, “Surface Waves in a Stratified Half Space with
Enhanced Continuum Properties, Part-1 - Formulation of the Boundary Value Problem,” European Journal of
Mechanics (Solids), Vol. 18, 1999, pp. 749-768.
Suiker, A.S.J., Chang, C.S., deBorst, R, and Esveld, C, “Surface Waves in a Stratified Half Space with
Enhanced Continuum Properties, Part-2 – Analysis of the wave Characteristics in Regard to High Speed
Railway tracks,” European Journal of Mechanics (Solids), Vol. 18, 1999, pp. 769-784.
Liao, C. L., Chan, T.C., Suiker, A.S.J., and Chang, C.S., “Pressure-dependent Elastic Moduli of Granular
Assemblies,” International Journal for Analytical and Numerical Methods in Geomechanics, 2000, Vol. 24,
pp. 265 – 279.
6
Zhong , X., and Chang, C. S., “Micromechanical Modeling for the Behavior of Cementitious Granular
Materials,” Journal of Engineering Mechanics, ASCE Publication, Vol. 125, No. 11, 1999, pp. 1280-1285.
Zhu, H., Chang C.S., and Lou, K.A., “2-D Normal Compliances for Elastic and Visco-elastic Binder Contact
with Finite Particle Size Effect,” International Journal of Solids and Structures, Pergamon Press, Vol. 37,
2000, pp. 7703-7716.
Suiker, A.S.J., deBorst, R, and Chang, C.S., “Micro-mechanical Modeling of Granular Material, part 1 –
Derivation of a Second-Gradient Micro-Polar Constitutive Theory,” Acta Mechanica, Springer-Verlag, Vol.
149, 2001, pp.161-180.
Suiker, A.S.J., deBorst, R, and Chang, C.S., “Micro-mechanical Modeling of Granular Material, part 2 – Plane
Wave Propagation in Infinite Media,” Acta Mechanica, Springer-Verlag, Vol. 149, 2001, pp.181-200.
Zhu, H., Chang, C.S., and Rish, J., “Derivation of Contact based Torsion Compliance and its Application in
Asphalt Motar Modeling,” Journal of Applied Mechanics, 2002 (accepted).
Anil Misra, Ching S. Chang, K. T. Chau, “Mechanics of fracture and failure in geomaterials,“Journal of
Engineering Fracture Mechanics, Elsevier Science Ltd., Vol. 69, No. 17, 2002, pp.1813-1814.
Chang, C. S., Askes, H., and Sluys, L. J., “A higher-order strain/higher-order stress gradient models derived
from a discrete microstructure, with application to fracture,” Journal of Engineering Fracture Mechanics,
Elsevier Science Ltd., Vol. 69, No. 17, 2002, pp.1907-1924.
Chang, C. S., Wang, T. K., Sluys, L. J., and vanMier J. G. M., “Fracture Modeling using a Microstructural
Mechanics Approach – I. Theory and Formulation,” Journal of Engineering Fracture Mechanics, Elsevier
Science Ltd., Vol. 69, No. 17, 2002, pp.1941-1958.
Chang, C. S., Wang, T. K., Sluys, L. J., and vanMier J. G. M., “Fracture Modeling using a Microstructural
Mechanics Approach – II. Finite Element Analysis,” Journal of Engineering Fracture Mechanics, Elsevier
Science Ltd., Vol. 69, No. 17, 2002, pp.1959-1976.
Huang, T. H. Chang, C. S., and C.Y. Chao, “Experimental and Mathematical Modeling for Fracture of Rock
Joint with regular asperities,” Journal of Engineering Fracture Mechanics, Elsevier Science Ltd., Vol. 69, No.
17, 2002, pp.1977-1996.
Chang, C. S., Matsushima, T., and Lee, X., “Heterogeneous strain and bonded granular structure change in
triaxial specimen studied by computer tomography,” Journal of Engineering Mechanics, ASCE, Vol. 129, No.
11, 2003, pp1295-1307.
Chang, C. S., Shi, Q., and Liao, C. L., “Elastic Constants for Granular Materials Modelled as First-order Straingradient Continua,” International Journal of Solids and Structures, Pergamon Press, Vol. 40, 2003, pp. 55655582.
Suiker, A.S.J., and Chang C.S., “Modelling Failure and Deformation of an Assembly of Spheres with Frictional
Contacts,” Journal of Engineering Mechanics, Vol. 130, No. 3, 2004, pp. 283-293.
Chang, C. S. and Kuhn , M. R., “On Virtual Work and Stress in Granular Media,” International Journal of
Solids and Structures, Vol 42, Pergamon Press, 2005, pp 3773-3793.
Chang, C.S. and Shi, Q., “A Mix-mode Elastic Finite Element Formulation for Bonded Granular Material
Considering Rotation of Particles,” Journal of Engineering Mechanics, Vol. 131, No. 2, 2005, pp. 120-130.
7
Chang, C. S. and Hicher , P. Y., “An Elasto-plastic Model for Granular Materials with Microstructural
Consideration,” International Journal of Solids and Structures, Pergamon Press, Vol. 42, 2005, pp. 4258 4277.
Hicher , P. Y. and Chang, C. S., “Anisotropic Nonlinear Elastic Model for Particulate Materials,” Journal of
Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 132, Issue 8, 2006, pp. 1052-1061.
Hicher , P. Y. and Chang, C. S., “Evaluation of Two Homogenization Techniques for Modeling the Elastic
Behavior of Granular Materials,” Journal of Engineering Mechanics, ASCE, Vol. 131, Issue 11, 2005, pp.
1184-1194.
Kuhn, M. R. and Chang C. S., “Stability, bifurcation, and softening in discrete systems: a conceptual approach
for granular materials,” International Journal of Solids and Structures, Vol. 43, No. 20, 2006, pp. 6026-6051.
Hicher , P. Y. and Chang, C. S., “A Microstructural Elastoplastic Model for Unsaturated Granular Materials,”
International Journal of Solids and Structures, Pergamon Press, Vol. 44, 2007, pp. 2304-2323.
Hicher , P. Y. and Chang, C. S., “An Elastic Model for Partly Saturated Granular Materials,” Journal of
Engineering Mechanics, ASCE, Vol. 134, No. 6, 2008, pp. 505-513.
Hicher , P. Y., Chang, C. S. and Dano, C., “Multi-scale Modeling of Grouted Sand Behavior,” International
Journal of Solids and Structures, Pergamon Press, Vol. 45, No. 16, 2008, pp. 4362- 4374.
Hicher, P.Y., Dano C. & Chang C. S., “Multi-scale Modelling of the Mechanical Behaviour of Grouted Sand”,
Studia Geotechnica et Mechanica, Vol. 30, No. 1-2, 2008, pp. 83-94.
Chang, C. S. and Hicher , P. Y., “A Model for Granular Materials with Surface Energy Forces,” Journal of
Aerospace Engineering, ASCE, Vol. 22, No. 1, 2009, pp.43-52.
Chang, C. S., Hicher , P. Y., Yin, Z.Y. and Kong, L., “Elastoplastic Model for Clay with Microstructural
Consideration,” Jounal of Engineering Mechanics, Pergamon Press, Vol. 135, No. 9, 2009, pp. 917-931.
Chang, C. S., Hicher , P. Y. and Daouadji, A., “Investigating Instability of Granular Materials by means of a
Micromechanical Model,” European Journal of Environmental and Civil Engineering, Vol. 13, No. 2, 2009,
pp.167-186.
Yin Z.Y., Chang C.S., Hicher P.Y., Karstunen M., “Micromechanical Analysis of Kinematic Hardening in
Natural Clay,” International Journal of Plasticity, Vol. 25, No. 8, 2009, pp. 1413-1435.
Yin Z.Y. & Chang C.S., “Microstructural Modelling of Stress-dependent Behaviour of Clay,” International
Journal of Solids and Structures, Vol. 46, No. 6, 2009, pp. 1373-1388.
Yin Z.Y. & Chang C.S., “Non-uniqueness of Critical State Line in Compression and Extension Conditions,”
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 33, 2009, pp. 1315-1338.
Chang C.S., Yin Z.Y., “Modeling Stress-dilatancy for Sand under Compression and Extension Loading
Conditions,” ASCE Journal of Engineering Mechanics, Vol.136, No. 6, 2010, pp 777-786.
Yin Z.Y., Chang C.S., Hicher P.Y., “Micromechanical Modelling for Effect of Inherent Anisotropy on Cyclic
Behaviour of Sand,” International Journal of Solids and Structures, Vol. 47, No. 14-15, 2010, pp 1933-1951.
Yin Z.Y., Chang C.S., Karstunen M., Hicher P.Y., “An Anisotropic Elastic Viscoplastic Model for Soft Soils,”
International Journal of Solids and Structures, Vol. 47, No. 5, 2010, pp 665-677.
8
Chang C.S., Yin Z.Y., “Micromechanical Modelling for Inherent Anisotropy in Granular Materials,” ASCE
Journal of Engineering Mechanics, Vol. 136, No. 7, 2010, pp 830-839.
Chang, C. S., Cerato, A. B., and Lutenegger, A. J., “Modeling the Scale Effect of Granular Media for Strength
and Bearing Capacity,” in the special issue on Unified Approach for Characterizing, Modeling and Simulating
of Stone-Based Infrastructure Materials, International Journal of Pavement Engineering, Vol 11, No. 5, 2010,
pp 343-353.
Yin Z.Y., Karstunen M., Chang C.S., Koskinen M., Lojander M., ”Modeling Time-dependent Behavior of Soft
Sensitive Clay,” ASCE Journal of Geotechnical and Geoenvironmental Engineering. Vol. 137, No. 11, 2011,
p. 1103-1113.
Chang C.S., Yin Z.Y., Hicher P.Y., “Micromechanical Analysis for Inter-particle and Assembly Instability of
Sand,” ASCE Journal of Engineering Mechanics, Vol. 137, No. 3, 2011, pp 155-168.
Chang C.S., and Yin Z.Y., “Micromechanical Modeling for Behavior of silty Sand with Influence of Fines,”
International Journal of Solids and Structures , Vol. 48, No. 15, 2011, pp 2655-2667.
Daouadji, A., Hicher P.Y., Chang C.S., Jrad, M., and Algali H., “Instability in loose sand: Experimental
results and numerical simulations with a microstructural model,” Advances in Bifurcation and Degradation in
Geomaterials, Springer Series in Geomechanics and Geoengineering Volume 11, 2011, pp 13-31
Matsushima, T., and Chang C. S., “Quantitative evaluation of the effect of irregularly shaped particles in
sheared granular assemblies,” Granular Matter, Volume 13, Number 3 (2011), 269-276.
Yin, Z.Y., Chang C. S., Hicher P.Y., and Wang, J. H., “Micromechanical analysis for the behavior of stiff clay.
Acta Mechanica Sinica, 2011, volume 27, Number 6, 1013-1022
Chang C.S, Yin Z,and Hicher P.Y., “Multi-scale Analysis of Instability in Sand,” Advances in Bifurcation and
Degradation in Geomaterials, Springer Series in Geomechanics and Geoengineering Volume 11, 2011, pp 2935
Chang C.S., “Micromechanical modelling of constitutive relations for granular material.” Micromechanics of
Granular Materials, Satake, M. and JT Jenkins (Eds.), 2012, Elsevier, Amsterdam, 271-278.
Chang C.S., and Meidani M., “Dominant Grains Network and Behavior of Sand-Silt Mixtures: Stress-Strain
Modeling,” International Journal for Numerical and Analytical Methods in Geomechanics, Vol.37, 2013, pp
2563-2589.
Yin Z.Y., Xu Q. and Chang C.S., “Modeling cyclic behavior of clay by micromechanical approach,” ASCE
Journal of Engineering Mechanics, 2013, Vol. 139, No. 9, 1305-1309.
Yin Z.Y., and Chang C.S., “Stress-dilatancy behavior for sand under loading and unloading conditions,”
International Journal for Numerical and Analytical Methods in Geomechanics, vol. 37, Issue 8, 2013, Pages
855-870.
Chang C.S., and Yang L., “Stress and fabric in granular material,” Theoretical and Applied Mechanics Letters,
2013, Volume 3, Number 2, DOI:10.1063/2.1302102 (early view published on-line, in print).
Hattab M., and Chang, C. S., “Interaggregate force and energy potential effect on clay deformation,” Journal
of Engineering Mechanics, 2015. DOI:10.1061/(ASCE)EM.1943-7889.0000898
Edited Books:
9
Advances in Micromechanics of Granular Materials, Elsevier, Amsterdam, 1992, p. 462, ISBN 0-444-89213-3.
(Edited with H. Shen, C.S. Campbell, M. Mehrabadi, and M. Satake.)
Mechanics of Granular Materials, a special issue of the Journal of Mechanics of Materials, Elsevier,
Amsterdam, 1993, p. 248, ISSN 0167-6636 (Edited with H. Shen, C.S. Campbell, M. Mehrabadi, and M.
Satake.)
Homogenization and Constitutive Modeling for Heterogeneous Materials, Applied Mechanics Division
Publication, Vol. 166, ASME, N.Y., 1993, p. 97, ISBN-0-7918-1145-X, Edited by C.S. Chang and J.W. Ju.
Mechanics of Materials with Discontinuities and Heterogeneities, Applied Mechanics Division Publication,
Vol. 201, ASME, N.Y., 1995, p. 177, ISBN-0-7918-1316-9, Edited by A. Misra and C. S. Chang.
Mechanics of Deformation and Flow of Particulate materials, ASCE Publication, p. 458, 1997, ISBN 0-78440251-5, Edited by C. S. Chang, A. Misra, R. Y. Liang and M. Babic.
Computers and Geotechnics, Elsevier Publication, Vol. 20, No. 3 / 4, 1997, p. 363, ISSN 0266-352X, Edited
by A. Misra and C. S. Chang.
Journal of Engineering Fracture Mechanics, Elsevier Science Ltd., Vol. 69, No. 17, 2002, p. 1813-1814,
Edited by A. Misra, C.S. Chang and K. T. Chau.
Articles in Books
Chang, C. S., and Abas, M. H. B., "Deformation Analysis for Braced Excavation in Clay," Application of
Plasticity and Generalized Stress-Strain in Geotechnical Engineering, Edited by R. N. Yong and E. T. Selig,
ASCE Special Publication, 1982, pp.205-226.
Chang, C. S., "Behavior of Plastic Flow for Sand," Constitutive Law for Engineering Materials: Theory and
Application, Edited by C. S. Desai, E. Krempl, P. D. Kiousis, T. Kundu, Elsevier Science Publishing Co. Inc.,
New York, Vol. 1, 1987, pp. 371 - 379.
Chang, C.S., "Micromechanical Modelling of Constitutive Equation for Granular Material," Micromechanics of
Granular Materials, Edited by J. T. Jenkins and M. Satake, Elsevier Science Publishers, Amsterdam, 1988, pp.
271-278.
Chang, C. S., "Micromechanical Approach to Constitutive Modelling for Granular Sand Based on Slip
Mechanism," Constitutive Equations for Granular Non-cohesive Soils, Edited by Adel S. Saada and G.
Bianchini, A. A. Balkema Publishers, Rotterdam, The Netherlands, 1988, pp. 183-200.
Chang, C. S., "Constitutive Modelling of Granular Materials as Generalized Continua with Non-Linear
Kinematic Fields," Powders and Grains, Edited by J. Biarez and R. Gourves, A. A. Balkema Publishers,
Rotterdam, The Netherlands, 1989, pp. 311-319.
Chang, C.S., "Micromechanics Modelling of Deformation and Failure for Granular Material," Advances in
Micromechanics of Granular Materials, Edited by Shen H. H. et al., Elsevier Science Publishers, Amsterdam,
1992, pp. 251-260.
Chang, C. S., "Microstructure Characterization in Constitutive Modelling of Granular Material,"
Microstructure Characterization in Constitutive Equations in Metals and Soils, Edited by G.Z. Voyiadjiis,
American Society of Mechanical Engineers press, MD-Vol.32, 1992, pp. 55-69.
Chang, C. S., "Dislocation and plasticity of granular materials with frictional contacts," Powders and Grains,
Birmingham, June 1993, pp. 105-111.
10
Chang Y. and Chang, C. S., "Effective Moduli of Random Material with Arbitrary Two-Point Joint
Probability," Homogenization and Constitutive Modeling for Heterogeneous Materials, ASME, Applied
Mechanics Division Publication Vol. 166, 1993, pp. 15-25. (Edited by Chang, C. S., and J.W. Ju.)
Misra, A. and Chang, C. S., "A homogenization Method for Effective Moduli of Randomly Packed Grains,"
Homogenization and Constitutive Modeling for Heterogeneous Materials, ASME, Applied Mechanics Division
Publication Vol. 166, 1993, pp. 63-75. (Edited by Chang, C. S., and J.W. Ju.)
Chang, C. S., “High-Gradient Constitutive Model for Granular Material with Random Packing Structure,”
Mechanics of Materials with Discontinuities and Heterogeneities, ASME Applied Mechanics Division
Publication, Vol. 201, 1995, pp. 15-27. (Edited by A. Misra and C.S. Chang).
Gao, J., and Chang, C. S., “ Wave Propagation in Granular Material Using High Gradient Theory,”
Micromechanics and Constitutive Modeling of Composite Materials, ASME Applied Mechanics Division
Publication, Vol. 202, 1996, pp. 35-47. (Edited by H. Zbib and I. Demir).
Chang , C.S. and Zhong, X., “ Damage Modeling for Cemented Particulate Materials,” Mechanics of
Deformation and Flow of Particulate Materials, ASCE Publication, 1997, pp. 247-258 . (Edited by Ching S.
Chang, Anil Misra, Robert Y. Liang and Marijan Babic).
Chang, C. S. and Tian-Chyuan Chan., “ Contact Law and Stress-Strain Relationship for Granular Materials,”
Recent Advances in Mechanics of Geomaterials, UMA Publication, 1997, ISBN 1-890643-00-9, pp. 1-10.
(Edited by Anil Misra.)
Chang, C. S., “Fundamentals of Granular Mechanics - Micromechanical Based Stress-strain Relationships,”
Introduction to Mechanics of Granular Materials, Editors: M. Oda and K. Iwashita, Balkema Publisher,
Rotterdam, 1999, pp. 35-45.
Chang, C. S., “Micromechanics of Granular Materials as Structured Media,” Modeling in Geomechanics,
Editors: M. Zaman, G. Gioda and J. R. Booker, John Wiley and Sons, Ltd., Chichester, England, 2000, pp.
179-195.
Suiker, A.S.J., de Borst, R. and Chang, C. S., “Micromechanally Based Higher-order Continuum Model for
Granular Materials,” Constitutive Modelling of Granular Materials, Editors: D. Kolymbas, Springer, Berlin,
2000, pp. 249-275.
Chang, C. S., “An Elasto-plastic Model for Granular Material with Microstructural Consideration,” QuasiStatic Deformations of Particulate Materials, Edited by K. Bagi, Publishing Company of BUTE, Budapest,
2003.
Chang C. S. and Hicher P. Y., “Chapter 7 : A Constitutive Model for Lunar Soil,” Lunar Settlements, CRC
Press, 2010, Edited by, Haym Benaroya – catalog # 83325)
Daouadji, A., Hicher P.Y., Chang C.S., Jrad, M., and Algali H., “Instability in loose sand: Experimental
results and numerical simulations with a microstructural model,” a chapter in the Book Bifurcations,
Instabilities and Degradations in Geomaterials (Edit: by: Richard Wan, Mustafa Alsaleh, Joe Labuz), Springer
Verlag, Berlin, 2011.
Conference Proceedings
Houston, W. N., Moriwaki, Y., and Chang, C. S., "Down Slope Movement of Lunar Soil and Rock Caused by
Meteors," Proceedings of the Fourth Lunar Science Conference, Houston, Texas, 1973, Vol. 4, pp. 374-384.
11
Alva-Hurtado, J., and Chang, C. S., "Characteristics of Peruvian Earthquakes in Lima Area," The Third
Peruvian Civil Engineering Conference, Lima, Peru, 1978, pp. 284-292.
Chang, C. S., and Soong, T. T., "A Probabilistic Approach to Consolidation Analysis," The Third International
Conference on Application of Statistics and Probability in Soil and Structural Engineering, Sidney, Australia,
1979, pp. 487- 496.
Chang, C. S., "A Simple Boundary Element Approach to the Prediction of the Soil-Track Structure Interaction
Problem," The Second International Symposium on Innovative Numerical Analysis in Applied Engineering
Science, Montreal, Canada, June 1980, pp. 491-497.
Chang, C. S., and Abas, M. H. B., "Deformation Analysis for Excavations in Clay," Proceedings of the
Symposium on Applications of Soil Constitutive Models in Geotechnical Engineering, ASCE, Hollywood,
Florida, October 1980, pp. 205-226.
Chang, C. S., "Footing Settlement Resulting from Earthquake Induced Pore Pressures," Proceedings of Sixth
National Meeting of the University Council for Earthquake Engineering Research, University of Illinois,
Urbana-Champaign, May 1980, p.70.
Chang, C. S., "Boundary Integral Method in Seepage Analysis with a Free Surface," Symposium on
Implementation of Computer Procedures and Stress-Strain Law in Geotechnical Engineering, Chicago, August
1981, pp. 421-429.
Chang, C. S., "Residual Pore Pressure and Deformation Behaviour of Soil Samples Under Variable Cyclic
Loading," Proceedings of the Internation Conference on Recent Advances in Geotechnical Earthquake
Engineering and Soil Dynamics, Vol. 1, St. Louis, Missouri, April 1981, pp. 107-113.
Chang, C. S., "Constitutive Modelling for Sand - A Particulate Mechanics Approach," Proceedings of the
International Conference on Constitutive Laws for Engineering Materials -Theory and Application, Tucson,
Arizona, January 1983, pp. 175-182.
Chang, C. S., "Microcomputer-Based Software for Geotechnical Engineering Design," Proceedings of the First
National Conference on Microcomputers in Civil Engineering, Orlando, Florida, November 1983, pp.
268-271.
Chang, C. S., "Stress Induced Packing Anisotropy for Sand," Proceedings of the Probabilistic Mechanics and
Structural Reliability Specialty Conference, ASCE, Berkeley, California, January 1984, pp. 219-223.
Chang, C. S., "Analysis of Earthquake Induced Settlement," Proceedings of the Eighth World Conference on
Earthquake Engineering, San Francisco, California, July 1984, Vol. 3, pp. 87-96.
Chang, C. S., "Dilatancy Modeling for Granular Sand in Simple Shear Condition," Proceedings of the Eleventh
International Conference on Soil Mechanics and Foundation Engineering, San Francisco, California, August
1985, pp. 419-422.
Chang, C. S., "Application of Boundary Element Method in Transient Flow Problems with Moving
Boundaries," Proceedings of the Eighth International Conference on Boundary Element Method in
Engineering, Tokyo, Japan, January 1986, pp. 327- 335.
Chang, C. S., Misra, A., and Weeraratne, S. P., "A Microstructural Approach to Constitutive Modelling for
Granular Soils," Engineering Mechanics Division, Specialty Conference, ASCE, Buffalo, New York, May
1987, (Engineering Mechanics - 6th Conference Abstracts, ASCE publication, May 1987, p.106).
12
Shaheen, W. A., Chang, C. S., and Demars, K. R., "Evaluation of Plate Anchor Theories in Sand," Proceedings
of the Offshore Technology Conference, OTC-5419, Houston, Texas, April 1987, pp. 521-530.
Chang, C. S., and Biswas, G. C., "Cyclic Densifications and Liquefaction Potential of Soil," Proceedings of the
Ninth World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, August 1988, pp. 283-286.
Chang, C. S., "Micro-modelling of Macro-constitutive Behavior for Granular Material," U.S. Japan Seminar on
Micromehanics of Granular Materials, Sendai, Japan, October 1987, pp. 115-123.
Chang, C. S., "Elasto-plastic Constitutive Modelling with Microstructural Considerations," Proceedings of the
International Conference on Constitutive Equations for Granular Non-Cohesive Soils: Test Results and
Predictions, Case Western Reserve University, July 1987, pp. 56-64.
Chang, C. S., and Selig, E. T., "Deformation Behavior of Granular Materials," Soil Mechanics Seminar,
Sponsored by Air Force Office of Scientific Research, MIT, Cambridge, Massachusetts, 1987, pp. 5-8.
Chang, C. S., "Deformation Analysis for Granular Material," Engineering Mechanics Division, Specialty
Conference, ASCE, Blacksburg, Virginia, May 1988. (Engineering Mechanics - 7th Conference Abstracts,
ASCE publication, May 1988, p.18).
Chang, C. S., "Cyclic Stress-Strain Modelling for Granular Soils with Micro-structural Consideration,"
Engineering Mechanics Division, Specialty Conference, ASCE, Blacksburg, Virginia, May 1988. (Engineering
Mechanics - 7th Conference Abstracts, ASCE publication, May 1988, p.201).
Chang, C. S. and Misra, A., "Stress-Strain Behavior of Sands - A Microstructural Approach," Proceedings of
the Fourth International Symposium on Interaction of Non-Nuclear Munition with Structures, Panama City
Beach, Florida, April 1989, pp. 354-459.
Chang, C. S. and Misra, A., "Fabric and Effective Moduli of Frictional Granulates," Proceedings of the Twelfth
Canadian Congress of Applied Mechanics, Ottawa, Canada, May 1989, pp. 532-533.
Chang, C. S., "Deformation of Granular Materials," Workshop on the Packing and Mechanics of Aggregates of
Spheres, Mathematical Sciences Institute, Cornell University, N.Y., June 1989, pp. 22-24.
Liao, C. L., and Chang, C. S., "Numerical Modelling for Large Deformation of Aggregates of Particles with
Meta-Stable Structures," Proceedings of the Seventh International Conference on Mathematical and Computer
Modelling, Chicago, August 1989, pp. 471-477.
Liao, C. L., and Chang, C. S., "A Micro-Structural Finite Element Model for Granular Solids," First U.S.
Conference on Discrete Element Methods, Golden, Colorado, October 1989, pp. 382-394.
Chang, C. S., "Constitutive Modelling of Granular Materials as Generalized Continua," Proceedings of the
International Conference on Micromechanics of Granular Media, Clermont- Ferrand, France, September 1989,
pp. 133-141.
Chang, C. S., and Misra, A., "Stress-Strain Modeling of Heterogeneous Granular Solid Based on
Micromechanics," Proceedings of the Third International Conference on Constitutive Law for Engineering
Materials: Recent Advances and Industrial and Infrastructure Applications, Tucson, Arizona, Jan. 1991,
pp.501-504.
Misra, A., and Chang, C. S., "Micro-mechanism of Induced Anisotropy in the Behavior of Granular Material,"
Proceedings of the Third International Conference on Constitutive Law for Engineering Materials: Recent
Advances and Industrial and Infrastructure Applications, Tucson, Arizona, Jan. 1991, pp.531-534.
13
Misra, A., and Chang, C. S., "Mechanical Properties of Cemented Sands Based on Inter-particle Contact
Behavior," Second International Conference on Recent Advances in Geotechnical Earthquake Engineering
and Soil Dynamics, March, 1991, Vol. 1, pp.93-96.
Chang, C. S., and Misra, A., "Influence of Finite Deformations in the Stress- Strain Modeling of Granular
Media," ASCE Engineering Mechanics Specialty Conference Mechanics Computing in 1990's and Beyond,
Columbus, Ohio, May, 1991, Vol.2, pp.1164-1168.
Misra, A., and Chang, C. S., "Constitutive Relations for Granular Solids Accounting for the Heterogeneous
Deformation Field," ASCE Engineering Mechanics Specialty Conference Mechanics Computing in 1990's and
Beyond, Columbus, Ohio, May, 1991, Vol.2, pp.1209-1213.
Chou N. C., Chao, S. J., Chang, C. S., and Ni, J., "FEM Analysis of Staged Construction for a Reinforced Earth
Wall.," Proceedings of Geotechnical Congress, Bolder, Colorado, June, 1991, Geotechnical Special
Publication No. 27, Vol.II, pp.1198-1209.
Chang, C. S., "Micromechanics modelling for deformation and failure of granular material," Micromechanics
of Granular Material, US-Japan seminar, Potsdam, New york, 1991.
Chang, C. S., "A statistical-Micromechanics Model for Particulate Material," Proceedings of Army Symposium
on Solid Mechanics, Synergism of Mechanics, Mathematics and Materials, Plymouth, Massachusetts, Nov.
1991.
Chang, C. S., "Constitutive Modelling for the Granular Material under Finite Strain with Particle Sliding and
Fabric Changes," Symposium on Particulate Mechanics, Kirtland AFB, Albuquerque, New Mexico, 1992, pp.
12-15.
Chang, C.S., “Micromechanics of Granular Media,” NSF/CNRS US-France Workshop on Recent Advances in
Geomechanical, Geotechnical, and Geo-Environmental Engineering in Rueil Malmaison, France, June 1-3,
1992.
Lee X., and Chang, C. S., "Constitutive Modelling for Material with Perfect Disordered Heterogeneity," ASCE
Engineering Mechanics Specialty Conference, Texas A & M University, Texas, May, 1992, pp.445-448.
Chang, C. S., "Probabilistic Micromechanics in Constitutive Modeling of Granular materials," ASCE
Engineering Mechanics Specialty Conference, Texas A & M University, Texas, May, 1992, pp.437-440.
Chang, C. S., "Microstructure Characterization in Constitutive Modelling of Granular Material," Symposium on
Microstructure Characterization in Constitutive Equations in Metals and Soils, ASME Applied Mechanics and
Materials Conference, Tempe, Arizona, April, 1992, pp. 55-69.
Chang, C. S. and Acheampong, A., "Accuracy and Stability for Static Analysis Using Dynamic Formulation in
Discrete Element Methods," Proceedings of the Second International Conference on Discrete Element Method,
March, 1993, pp. 379-389.
Chang Y. and Chang C. S., "Effective Moduli of Random Material with Arbitrary Two-Point Joint Probability,"
Joint ASCE/ASME/SES Conference, June, 1993, pp. 346.
Chang, C. S., "Micromechanical Modeling for Deformation of Randomly Packed Granules," Joint
ASCE/ASME/SES Conference, June, 1993, pp. 497.
Chang, C. S., "Dislocation and plasticity of granular materials with frictional contacts," Powders and Grains,
Birmingham, June 1993, pp. 105-111.
14
Chang, C. S., "Micromechanical Model for Randomly Packed Granules," Probabilistic Approach in Material
Modeling, Cachan, France, Nov., 1993.
Chang, C. S. and Kabir, G. M., "Mechanism for Brittle and Ductile Behavior of Cemented Sands," Proceedings
of the Thirteenth International Conference of Soil Mechanics and Foundation Engineering, New Delhi, India,
1994.
Chang, C.S., "Inter-particle Properties and Elastic Moduli for Sand," Mechanics of Granular Material,
Published by International Society of Soil Mechanics and Foundation Engineering, 1994, pp. 7-14.
Chang, C. S., "Micromechanical Modelling for Heterogeneous Granular Materials," Workshop on Mechanics
and Statistical Physics of Particulate Materials, Institute for Mechanics and Materials, University of California
at San Diego, La Jolla, California, 1994, pp. 17-18.
Chang, C. S., "Settlement and compressibility for sand under one-dimensional loading condition," Vertical and
Horizontal Deformations of Foundations and Embankments, Edited by A. T. Yeung and G. Y. Felio, Vol. 2,
ASCE, 1994, pp.1298-1311.
Chang, C. S., and Yang, D. H.,”Micromechanics Modelling for Particulate Composites,” Proceedings of
Structures Congress XIII, ASCE Specialty Conference, Boston, Massachusetts, April 3-5, 1995, pp. 14541457.
Achempong, K., and Chang, C. S., “Evaluation of Numerical Integration Methods in Discrete Element
Analysis,” Proceedings of the 10th Engineering Mechanics Conference, ASCE Specialty Conference, Boulder,
Colorado, May 21-14, 1995, pp. 485-489.
Chang, C. S., “Microstructural Modeling for Granular Material,” Proceedings of the 10th Engineering
Mechanics Conference, ASCE Specialty Conference, Boulder, Colorado, May 21-14, 1995, pp. 1304-1308.
Ma, L., and Chang, C. S., “Homogenization Techniques for Modelling of Randomly Packed Granules,”
Proceedings of the 10th Engineering Mechanics Conference, ASCE Specialty Conference, May 21-14, 1995,
pp. 313-317.
Chang, C. S., “High-Gradient Constitutive Model for Granular Material with Random Packing Structure,”
ASME Applied Mechanics and Materials Conference, Los Angeles, California, June 28-30, 1995, p. 208.
Gao, J., and Chang, C. S., “ Wave Propagation in Granular Material Using High Gradient Theory,” ASME
Applied Mechanics and Materials Conference, Los Angeles, California, June 28-30, 1995, p. 295.
Chang, C. S.,“Effect of Internal Length on the Vibration of Granular Solids,” Proceedings of The Eleventh
ASCE Engineering Mechanics Specialty Conference, Fort Lauderdale, Florida, May 1996, p.873-877.
Chang, C. S.,“ Micromechanical Modeling for Granular Materials,” Proceedings of The Eleventh ASCE
Engineering Mechanics Specialty Conference, Fort Lauderdale, Florida, May 1996, p.551-554.
Chang, C. S., “Microstructure and Physical Properties of Granular Material,” Workshop on Sediment
Geoacoustical and Geotechnical Constitutive Modeling, University of Rhode Island, Nov., 1995.
Chang, C. S., “Recent Developments in Granular Mechanics,” Proceedings of The First International
Conference on Analysis of Discontinuous Deformation, National Central University, Taiwan, Rep. of China,
1995, p.298-311.
Chang, C. S., "Moduli of Granular Materials with Visco-elastic Binders," ASME Applied Mechanics Conference,
Johns Hopkins, Baltimore, Maryland, 1996, p. 275.
15
Chang, C. S. and Emeriault F., "Inter-particle Forces and Displacement in Granular Materials," ASME Applied
Mechanics Conference, Johns Hopkins, Baltimore, Maryland, 1996, p. 269.
Chang, C. S. and Zhong, X., “Damage and Fatigue Modeling for Bonded Particulate Materials,” Proceeding of
McNU’97 Conference, Northwestern University, 1997, p. 660.
Chang, C. S. and Chan, T. C., “Contact Law and Stress-Strain Relationship for Granular Materials,”
International Mechanical Engineering Congress, Atlanta, Georgia, 1996, p 1.
Chang, C. S., “Damage and Fatigue Modeling for Bonded Particulate Materials,” Proceedings of the Third
International Conferences on Powders and Grains, Duke University, 1997, pp. 271-274.
Emeriault, F. and Chang, C. S., “Fabric and Contact Parameters for Sand from Wave Velocity Measurements,”
Proceedings of the Third International Conferences on Powders and Grains, Duke University, 1997, pp. 235238.
Chang, C. S., “Modeling of Granular Materials with Intrinsic Length Scale,” Proceedings of the Second
European Mechanics of Materials Conference, Magdeburg-Germany, 23-26 February, 1998, pp. 65-73.
Chang, C. S., “Numerical and Analytical Modeling for Granulates,” Proceedings of the Ninth International
Conference on Computer Methods and Advances in Geomechanics, Wuhan, China, 2-7 Nov. 1997, Balkema,
Rotterdam. pp 105-114
Zhong X. and Chang, C. S., “Numerical Modeling for Cementitious Granular Materials,” Proceedings of the
Ninth International Conference on Computer Methods and Advances in Geomechanics, Wuhan, China, 2-7
Nov. 1997, Balkema, Rotterdam. pp. 975 - 980.
Chang, C. S. and Zhong X., “Modeling of Fracture Damage in Concrete Pavement Materials,” Proceedings of
the 12th Engineering Mechanics Conference, La Jolla, California, May 17-20, 1998, pp. 1078-1081.
Misra, N., Chang, C. S. and Misra, A., “Viscous Behavior of Granular Materials,” Proceedings of the 12th
Engineering Mechanics Conference, ASCE Publication, La Jolla, California, May 17-20, 1998, pp. 1347-1350.
Chang, C. S., “Effective Properties for Random Materials,” Proceedings of the 12th Engineering Mechanics
Conference, ASCE Publication, La Jolla, California, May 17-20, 1998, pp. 1493-1496.
Chao S. J., and Chang, C. S., “Method of Distributive Tensor for Effective Moduli of Heterogeneous
Materials,” Proceedings of the 13th Engineering Mechanics Conference, ASCE Publication, Baltimore,
Maryland, June 13-16, 1999, pp. 215-222.
Zhong, X, Chang C. S., and Shashidhar, N., “Crack Growth Analysis for the Fatigue Behavior of Asphalt
Concrete,” Proceedings of the 13th Engineering Mechanics Conference, ASCE Publication, Baltimore,
Maryland, June 13-16, 1999, pp. 294-300.
Vaidya, S., and Chang C. S., “Simulation of Fracture Behavior of Bonded Granulates Using A Static DEM
Formulation,” Proceedings of the 13th Engineering Mechanics Conference, ASCE Publication, Baltimore,
Maryland, June 13-16, 1999, pp. 307-413.
Zhong, X,, Shashidhar, N. and Chang C. S, “Dem Stability for Static Analysis in Aggregate Packing,”
Proceedings of the 14th Engineering Mechanics Conference, ASCE Publication, Austin, Texas, May 22-24,
2000.
Chang C. S, “Micromechanical Modeling for Cement or Asphalt Concrete,” Proceedings of the 14th
Engineering Mechanics Conference, ASCE Publication, Austin, Texas, May 22-24, 2000.
16
Chang C. S, “Fracture analysis of bonded granular materials,” Proceedings of the 14th Engineering Mechanics
Conference, ASCE Publication, Austin, Texas, May 22-24, 2000.
Chang, C. S., Wang T.K., Sluys, B. and van Mier, J.G.M., “Fracture Modeling with a Microstructural
Mechanics Approach,” Fourth International Conference on Fracture Mechanics of Concrete and Concrete
Structures, Cachan, May 28 – June 2, 2001.
Chang, C. S., Askes, H., and Sluys, L. J., “A higher-order continuum theory for granular media with application
to wave propagation and fracture,” Mechanics of Materials Conference, June 26 – 29, SanDiego, 2001, p. 188.
Shi, Q, T. Matsoshima, and Chang, C. S., “First Strain Gradient Elasto-Plastic Model for Strain Localization
Analysis,” Mechanics of Materials Conference, June 26 – 29, SanDiego, 2001, p. 190.
Wang, T.K., Chang, C. S., Van Mier, J.G.M., Sluys, L.J., and Bittencourt, T.N., “Fracture Modeling of
Concrete Using Two Different Microstructural Mechanics Approaches,” Mechanics of Materials Conference,
June 26 – 29, SanDiego, 2001, p. 186.
Suiker, A., and Chang, C. S., “Meso-scale Continuum Model and Discrete Model for Granular Materials,” 15th
ASCE Engineering Mechanics Conference Columbia University, New York, June 2-5th , 2002, p. 60.
Chang, C. S., “A First-gradient Stress-strain Model for Granular Materials using Microstructural Approach,”
15th ASCE Engineering Mechanics Conference, Columbia University, New York, June 2-5th , 2002, p. 74.
Chang, C. S., “An Elasto-plastic Model for Granular Material with Microstructural Consideration,”
QuaDPM03 Workshop, Budapest, Hungary, Aug. 25-28, 2003
Chang, C. S., “Strain-softening Analysis for Soil Modeled as a Generalized Continuum,” 5 th EUROMECH
Solid Mechanics Conference (ESMC), Thessaloniki, Greece, 2003
Chang, C. S., “An Elasto-plastic Model for Granular Material with Microstructural Consideration”, 16th ASCE
Engineering Mechanics Conference, Mini-Symposium: Tribute to Kirk C. Valanis (EM2003), University of
Washington, Seattle, Washington, July 16-18, 2003.
Shi, Q., and Chang, C. S., “Numerical Analyses for the Effect of Heterogeneity on Shear Band Formation",
16th ASCE Engineering Mechanics Conference (EM2003), University of Washington, Seattle, Washington,
July 16-18, 2003.
Chang, C. S., “Stress-strain Analyses for Granular Material with Consideration of inter-particle properties”,
17th ASCE Engineering Mechanics Conference, University of Delaware, Delaware, Newark, DE, June 13-16,
2004.
Hicher, P. Y. and Chang, C. S., “A Microstructural Model for Partially Saturated Granular Materials”,
Proceedings of McMat 2005, 2005 Joint ASME/ASCE/SES Conference on Mechanics and Materials, June 1-3,
2005 Baton Rouge, Louisiana.
Kuhn, M. R. and Chang, C. S., “Continuum models of discrete particle systems with particle shape
consideration,” Proceedings of McMat 2005, 2005 Joint ASME/ASCE/SES Conference on Mechanics and
Materials, June 1-3, 2005 Baton Rouge, Louisiana.
Chang, C. S. and Hicher, P. Y., “A Microstructural Plasticity Model for Clay,” Proceedings of McMat 2005,
2005 Joint ASME/ASCE/SES Conference on Mechanics and Materials, June 1-3, 2005 Baton Rouge,
Louisiana.
17
Suiker, A., Chang, C. S., and de Borst, R., “Enhanced continua and discrete lattices for modelling granular
assemblies,” Proceedings of McMat 2005, 2005 Joint ASME/ASCE/SES Conference on Mechanics and
Materials, June 1-3, 2005 Baton Rouge, Louisiana.
Chang, C. S. and Hicher, P. Y., “Modelling Issues for Lunar Soil,” The 2nd NASA/ARO/ASCE Workshop on
Granular Materials in Lunar and Martian Exploration International Conference on Engineering, Construction
and Operations in Challenging Environments (Earth & Space 2006)
Chang, C. S. , Hicher, P. Y., and Chao, S. J., “A Unified Microstructural Approach for Modeling Soils,”
Proceedings of 15th U.S. National Congress on Theoretical and Applied Mechanics, June 25-30, 2006, Bolder,
Colorado.
Hicher, P. Y., and Chang, C. S., “An Elastoplastic Model for Unsaturated Granular Soils with Microstructural
Consideration,” Proceedings of 15th U.S. National Congress on Theoretical and Applied Mechanics, June 2530, 2006, Bolder, Colorado.
Takashi Matsushima & C.-S. Chang, “An elasto-plastic constitutive model of granular materials based on contact
force distribution,” International Symposium on Geomechanics and Geotechnics of Particulate Media, 12 - 14
September 2006, Ube, Yamaguchi, JAPAN
Chang, C. S., and Hicher, P. Y., “A Microstructural Stress-strain Model for Instability in Granular Soil,”
Workshop on Instability Across the Scales, July 1-5, 2007, Delft, Netherlands.
Hicher P.Y. & Chang C. S., "A Constitutive Model for lunar soil”, Earth and Space 2008, Long Beach,
California, 3-5 March 2008.
Hicher P.Y. & Chang C. S., “Analysis of Instability in Granular Materials by means of a Micro-structural
Constitutive Model”, Second Euro Mediterranean Symposium on Advances in Geomaterials and Structures,
AGS’08, Hammamet, Tunisia, 5-7 May 2008.
Hicher P.Y. & Chang C. S., “A Microstructural Model for Cohesive-frictional Granular Materials”, Inaugural
International Conference of the Engineering Mechanics Institute, EM’08, Minneapolis, USA, 18-21 May 2008.
Hicher P.Y. & Chang C. S., “Investigating Instability Conditions in Granular Materials with Different Initial
Densities by means of a Micro-structural Constitutive Model”, 8th Int. Workshop on Bifurcation and
Degradation in Geomaterials, Lake Louise, Canada, 28-31 May 2008.
Hicher P.Y. & Chang C. S., “A Microstructural Model for Cemented Sand”, the 12th Int. Conf. of the
International Association for Computer Methods and Advances in Geomechanics, Goa, India, 1-6 Oct. 2008.
Chang C. S., Yin, Z. Y., and Hicher P.Y. “A strain-rate based micromechanical model for soft soils,”
Conference of Engineering Mechanics, EM’09, Virginia, USA, June 18-21 2009.
Chang C. S. Hicher P.Y., “Some Issues in Micromechanical Modelling of Granular Materials,”, Powders and
Grains 2009, Proceedings of the 6th International Conference on Micromechanics of Granular Media, Golden,
Colorado, 13-17, July 2009, pp. 1077-1080.
Hicher P.Y. & Chang C. S., “Instability in Granular Materials with Internal Erosion”, Powders and Grains
2009, Proceedings of the 6th International Conference on Micromechanics of Granular Media, Golden,
Colorado, 13-17, July 2009, pp. 153-157.
Kuhn M. R. & Chang C. S., “Measurement of Micropolar Effects in Granular Materials,” Powders and Grains
2009, Proceedings of the 6th International Conference on Micromechanics of Granular Media, Golden,
Colorado, 13-17, July 2009, pp. 1093-1095.
18
Chang C.S. & Chao S.J., “Instability of Granular Material: From Micro to Macro”, 2010 Engineering
Mechanics Institute Conference, University of Southern California, 8-11, August 2010, pp. 66.
Yin Z.Y., Chang C.S., Hicher P.Y., “A Microstructural Approach for Modeling the Mechanical Behavior of
Structured Clays”, Proceedings of the Geoshanghai Conference 2010, Shanghai, China, 3-5, June 2010.
Chang, C. S., “A stress-strain modeling approach for soils: from micro to macro,” Proceedings of
International Symposium on Geomechanics and Geotechnics, Shanhai, China, Oct 10-12, 2010, CRC
Press/Balkema, Taylor and Francis Group.
Chang, C.S. and Meidani, M., "Stress-Strain Modeling for Silty-Sand." Proceedings of Engineering Mechanics
Institute Conference (EMI 2011), Northeastern University, Boston, June 2-4, 2011.
Chang, C.S. and Meidani, M., "Deformation and failure for soils under erosion" CMMI, NSF Engineering
Research and Innovation Conference, Atlanta, Georgia, January 4-7 , 2011.
Chang, C.S. and Meidani, M., " Modeling the behavior of non-ideal bimodal packings: sand-silt mixtures."
Proceedings of Engineering Mechanics Institute Conference and ASCE Joint Specialty Conference on
Probabilistic Mechanics & Structural Reliability, University of Nortre Dame, Indiana, June 17- 20, 2012.
Chang, C.S. and Meidani, M., "Deformation and failure for soils under erosion" CMMI, NSF Engineering
Research and Innovation Conference, Boston, Massachusetts, July 9- 11, 2012.
Chang, C.S., " Micromechanical Analysis for Instability of Soil." Engineering Mechanics Institute Conference,
Northwestern University, Evanston, August 4 - 7, 2013.
Technical Reports
Quigley, D. W., Duncan, J. M., Caronna, S., Mouroux, P. J., and Chang, C. S., "Three Dimensional Finite
Element Analysis of New Melones Dam," Geotechnical Engineering Report, No. UCB/GT/87-03, Dept. of
Civil Engineering, University of California, Berkeley, 1976.
Chang, C. S., and Duncan, J. M., "Analysis of Consolidation of Earth and Rockfill Dams," Soil and Pavement
Laboratory Report No. S-77-4, U. S. Army Corps of Engineers Waterways Experiment Station, September
1977.
Chang, C. S., and Duncan, J. M., "EXCAV: A Computer Program for Analysis of Stresses and Movement in
Excavations," Geotechnical Engineering Report No. TE77-4, National Science Foundation, August 1977.
Selig, E. T., Chang, C. S., Adegoke, C. W., and Alva- Hurtado, J. E., "A Theory for Track Maintenance Life
Prediction," U. S. Dept. of Transportation Report No. DOT-RSPA-DPB-50-79-22, 1979.
Duncan, J. M., D'Orazio, T., Chang, C. S., Wang, K. S., and Lamiq, L. I., "CON2D: A Finite Element
Computer Program for Analysis of Consolidation," Geotechnical Engineering Report No. UCB/GT/81-01, U.
S. Army Corps of Engineers Waterways Experiment Station, March 1981.
Chang, C. S., "Deformation of Sands under Cyclic Loading - A Micro-structural Approach," Air Force of
Scientific Research Report No. AFOSR-TR-88-0982, 1988, National Technical Information Service, U. S.
Department of Commerce.
Chang, C. S., "Constitutive Modelling for Granular Material under Finite Strains with Particle slidings and
Fabric Changes," Defense Technical Information Center (DTIC), Reference No. ADA248187, 1992, National
Technical Information Service, U. S. Department of Commerce.
19