MSDSH-SERIES(H200-H-500)

advertisement
JRM Chemical, Inc.
MSDS
MATERIAL SAFETY DATA SHEET
MSDS:
Date:
IDENTIFICATION
Product Name
Chemical Family
Emergency Telephone
Company
HAZARDOUS INGREDIENTS
HMIS Rating
410
05/23/98
Page 1 of 3
H-SERIES (H-200 – H-500 AQUEOUS ABSORBENT)
Crosslinked polyacrylamide
216-475-8488
JRM Chemical, Inc.
4881 NEO Parkway
Cleveland, OH 44128
Telephone:
216-475-8488
Fax:
216-475-6517
Not hazardous under OSHA 29CRF 1910.1200
1
0
1
B
FIRST AID
Skin
Eye contact
Inhalation
Ingestion
Wash with warm soapy water after use.
Immediately flush with water. If irritation
continues, consult a physician.
If dust is present, do not breathe. Move to
open air with fresh air.
Do not give any medication unless specified
by a physician.
FIRE FIGHTING MEASURES
Flash Point
LEL
EUL
Extinguishing Media
Special precautions
Special Protective
Equipment
ACCIDENTAL RELEASE
N/A
N/A
N/A
Use water, carbon dioxide, foam.
Material is slippery when wet
None required
Spilled material is very slippery when wet. Do not
initially flush with water. Sweep up spills and place
in airtight container for disposal. Flush area thoroughly
with water, scrub and remove any residue.
Page 2 of 3
MATERIAL SAFETY DATA SHEET
SOIL MOIST
H-SERIES (H-200 – H-500 AQUEOUS ABSORBENT)
HANDLING AND STORAGE
Storage
Handling
Store in a cool dry location.
Keep from freezing.
Practice good industrial hygiene.
Immediately sweep up any spills. To avoid
potential dust, maintain good housekeeping.
Do not smoke when using. Avoid contact with skin.
PERSONAL PROTECTION
Respiratory Protection
Protective Gloves
Eye Protection
Skin/Body Protection
Other
Use NIOSH approved respirator if not properly
ventilated and dust accumulation is more than 15 mg/m3.
Recommended if prolonged use of product.
Goggles with side shield
No special suits required, only if splashing is likely.
Wash affected areas after use.
PHYSICAL/CHEMICAL PROPERTIES
Appearance and color
Odor
pH
Melting Point
Flash Point
Vapor Density
Autoignition
White granular
None
N/A
N/A
N/A
N/A
N/A
Stablity
Polymerization
Conditions to avoid
Incompatible Material
Stable
Will not occur
None
Strong oxidizing agents.
STABILITY
TOXICOLOGICAL
Inhalation
Dermal
Oral
Non toxic by inhalation
Non toxic
LD 50 Accute oral on rats> 5.0gm/Kg.
IRRITATION
Eyes
Skin
Sensitization
Non irritating
Non irritating
Product not expected to be sensitizing.
Page 3 of 3
MSDS
MATERIAL SAFETY DATA SHEET
H-SERIES (H-200 – H-500 AQUEOUS ABSORBENT)
ECOLOGICAL
Considered non toxic to aquatic environment.
DISPOSAL
Unused Product:
REGULATORY
Components are on TSCA and Canada DSL.
Considered non hazardous under 29 CFR 1910.1200.
Not applicable under SARA TITLE III
OTHER
NFPA
Fire
Health
Reactivity
Special
Dispose in accordance with city, state and federal regulations.
1
0
1
-
CONTACT PERSON Safety Manager
This information is given without any warranty or representation. We do not assume any legal responsibility for
same. It is offered solely for your consideration, investigation and verification. Before using any product, read its
label.
JRM Chemical, Inc.
4881 NEO Parkway
Cleveland, OH 44128
Phone: 216-475-8488
Fax:
216-475-6517
Download