SURFACE MINING: Planning and Operation of Mines.
T.S. Golosinski. 2000. Advances in automation and robotization of open pit mining. In Mining in the
New Millennium, Golosinski (ed.), 2000 Balkema, Rotterdam, pp. 145-152.
T.S. Golosinski. 2000. Open pit mining: how far is the “Intelligent Mine”?. Surface Mining , vol. 52, No.
4, pp.417-421
Golosinski, T. S. and Bush, T. 2000. A comparison of open pit design and scheduling techniques.
2000. International Journal of Surface Mining, Reclamation and Environment.
Vol. 14, no. 1. pp. 53-61.
Tad S. Golosinski and K. Ataman. 1999. Total open-pit mining systems: a dream or a reality?
Proceedings.
Turkish Mining Congress, Ankara, May 10-14, pp. 89-92.
Y. D. Jiang and Tad. S. Golosinski. 1999. Intelligent surface mining systems. In: Xie and Golosinski
(eds). Mining Science and Technology '99. A.A. Balkema, Rotterdam/Brookfield pp. 649-652.
Golosinski T. S. 1999. Mining system selection and applications: continuous vs. cyclical mining.
Braunkohle / Surface Mining , vol. 51 , no.1, pp. 33-38. January.
Golosinski T. S. 1998. Contract mining improves performance: the Australian experience. Mining
Engineering , vol. 50, no.11 (November), pp.36-41.
Golosinski T. S. 1998. Continuous or cyclical surface mining: the future. Proceedings . 5 th International
Symposium on Continuous Surface Mining. Politechnika Wroclawska, Poland. Series Konferencje, vol.
21, pp. 144-151
Golosinski T.S. 1998. Mine maintenance: which system is best for you? Proceedings, 3 rd International
Conference of Maintenance Societies ICOMS-98. May 19-21, Adelaide, Australia
P Nguyen and Tad S Golosinski. 1996. Computer assisted production scheduling in open pit mines: system comparison. Proceedings, Fifth Int’l Symposium on Mine Planning and Equipment Selection,
A.A. Balkema/Rotterdam/Springfield
B Tolwinski and T S Golosinski. 1995. Long Term Open Pit Scheduler.
Fourth International
Symposium on Mine Planning and Equipment Selection, Calgary, Canada, October 31 -November 3, pp. 265-270.
T S Golosinski. 1995. Mt Whaleback in-pit waste crushing system . Proceedings, Fourth Int'l
Continuous Surface Mining Symposium, Aachen, Germany, June 6-8, pp. VIII/33-38..
T S Golosinski. 1995. Mine planning in a large surface mine . Fourth Int'l Continuous Surface Mining
Symposium, Aachen, Germany, June 6-8, pp. III/35-39.
T.S. Golosinski and S. Freemam. 1994. Trolley assisted haulage: Australian case study. International
Journal of Surface Mining, Reclamation and Environment , vol. 8, no. 4, pp. 141-144.
T S Golosinski. 1994. Performance of dragline hoist and drag ropes. Mining Engineering, vol. 46, no.
11, pp. 1285-1288.
T.S. Golosinski and J.W. Abernethy, 1994. Benchmarking performance of the Western Australian mines.
Proceedings Third International Symposium on Mine Planning and Equipment Selection,
Istanbul, Turkey. October 18 to 20, pp. 433-436.
Dincer A.T. and Golosinski T. S., 1993. Pit limit optimization algorithms - present status and developments . Proceedings, Applications of Computers in the Mineral Industry, Baafi E Y (ed.).
Wollongong NSW, October. p. 293-301
1

T.S. Golosinski, 1992. El Cerrejon Zona Norte - a giant open pit coal mine in Colombia, South
America . Journal of Mines, Metals and Fuels, vol. 40, no. 8&9, August-Sept., p. 234-251.
T.S. Golosinski, 1992. Selection considerations for 218t (240 st) off-highway trucks.
Mining
Engineering, vol. 44, no. 10, pp. 1245-1247.
T.S. Golosinski, 1991. El Cerrejon: Project Design and Construction . Annual General Meeting of
ASCE, Orlando, Florida, September
L.F. Chaves and T.S. Golosinski, 1991. Operational Experience of El Cerrejon - Zona Norte.
Proceedings, p. 233-239, International Symposium on Surface Mining "Mirny 91", Udachny, U.S.S.R.
(in Russian)
T.S. Golosinski. Open Pit Mining . 1991 McGraw-Hill Yearbook of Science and Technology, pp.274 to
275. McGraw-Hill, New York.
T.S. Golosinski, 1989. Mining Canadian Oil Sands with Bucketwheel Excavators . Zeszyty Naukowe
AGH, Cracow, Poland, z.148, p.29-38 (in Polish).
T.S. Golosinski and W. Cholewa, 1989. Wear patterns and discard criteria of dragline hoist and drag ropes.
Proceedings, OIPEEC Round Table Conference: Wire Rope Discard Criteria. Zurich,
Switzerland, September 6-9, p.21.1-21.14.
T.S. Golosinski. 1989. Selective continuous surface miners and their possible applications in oil sand mining.
CIM Bulletin, vol.82, no.925, p. 51-57.
T.S. Golosinski. 1989. Trolley assisted off-highway haulage.
Off-Highway Haulage in Surface Mines,
T.S. Golosinski and V. Srajer (eds.), A.A. Balkema, Rotterdam/Brookfield, p.211-216.
T.S. Golosinski. 1988. Field investigations of oil sand diggability with a bucketwheel excavator.
Continuous Surface Mining, T.G. Rozgonyi and T.S. Golosinski (eds.). A.A. Balkema,
Rotterdam/Brookfield, p. 47-53.
T.S. Golosinski and F.G. Boehm. 1988. Selection of Belt Conveyor Shifting Equipment.
AIME
Transactions, vol. 282, p. 1832-1839.
T.S. Golosinski. 1987.
Selective Continuous Surface Miners.
Proceedings, National Symposium on
Mining, Hydrology, Sedimentology and Reclamation. Lexington, Kentucky, p.47-58.
J.K. Szymanski, T.S. Golosinski and V. Srajer, 1987. Remote On-board Quality Sensing Technique in
Coal Cutting and Hauling Systems.
Canada Centre for Mineral and Energy Technology CANMET,
Report CLR 87-90 (TR).
T.S. Golosinski, 1987. Continuous Selective Surface Miners: Possible Applications in Oil Sand Mining.
3rd District Five Meeting of the Canadian Institute of Mining and Metallurgy, Fort McMurray, Alberta.
T.S. Golosinski and R.K. Singhal. 1987.
Basic Considerations in Selection of Bucketweel Excavators .
International Journal of Surface Mining, vol.1, no.1, p.67-71.
R.M. Krzanowski and T.S. Golosinski. 1987. Diggability of Plains Overburden with Bucketwheel
Excavators.
CIM Bulletin, vol.80, no.901, p.44-45.
T.S. Golosinski. 1987. Maintenance Strategies for Continuous Surface Mining Equipment.
Continuous
Surface Mining. T.S. Golosinski and F.G. Boehm (eds). Trans Tech Publications, p.237-245.
T.S. Golosinski and F.G. Boehm. 1987. Belt Conveyor Shifting.
Continuous Surface Mining. T.S.
Golosinski and F.G. Boehm (eds). Trans Tech Publications, p.561-569.
2

M.E. Pico and T.S. Golosinski, 1987. BWE Mining Face Design.
Continuous Surface Mining. T.S.
Golosinski and F.G. Boehm (eds). Trans Tech Publications, p.333-341.
J. Wolski and T.S. Golosinski, 1986. Performance Factors of Bucketwheel Excavator Systems.
AIME
Transactions, vol.280, p. 1904-1911.
T.S. Golosinski, 1986. Automation in Canadian Surface Mining.
Proceedings, First Canadian
Symposium on Applications of Automation in Mining, Sudbury, Ontario.
R.K. Singhal and T.S.Golosinski, 1986. Automation and Remote Control of Continuous Mining
Systems for Surface Mining of Oil Sand . Proceedings, 2nd International Conference on Innovative
Mining Systems, p. 48-55. The Pennsylvania State University.
R.K.Singhal and T.S.Golosinski, 1986. Surface Mining of Canadian Coal: Equipment Selection and
Mining Methods.
Proceedings, Int'l Symposium on Modern Coal Mining Technology, Fuxin Mining
Institute, Fuxin, China.
T.S.Golosinski and R.K.Singhal, 1985. Productivity of Bucketwheel Excavators.
World Mining
Equipment, vol.9, no.9, p.25-29.
T.S.Golosinski, R.K.Singhal and R.M.Krzanowski, 1985. Utilization of Bucketwheel Excavators: Mining and Geotechnical Factors . Proceedings, Mining Equipment Selection Symposium, University of
Calgary, Alberta.
T.S.Golosinski and W.H.Griffin, 1985. Die Modellierung der Gewinnungsprocesse von Oelsanden mittels der SLAM II-Methode. XXXVI Berg und Huettenmaennischer Tag, Bergakademie Freiberg,
Germany
R.M.Krzanowski and T.S.Golosinski, 1985. Diggability of Plains Overburdens with Bucketweel
Excavators . 87th AGM of the CIM, Vancouver, B.C.
T.S.Golosinski, F.G.Boehm and P.M.Tucker, 1985.
An assessment of Soviet bucketwheel excavator and direct sidecasting technology . CIM Bulletin, vol.78, no.879, p.59-68.
T.S.Golosinski, 1985. Surface Mining Systems in Athabasca Oil Sands - a review of performance.
Bulk
Solids Handling, vol.5, no.1, p.149-154.
T.S.Golosinski, 1984. Soviet Continuous Surface Mining Technology.
Bulk Solids Handling, vol.4, no.4, p.781-789.
T.S.Golosinski, E.McRoberts and W.F.Gilmore, 1984. An assessment of European BWE technology .
CIM Bulletin, vol.77, no.867, p.57-66.
T.S.Golosinski and R.K.Singhal, 1984. Productivity of Bucketwheel Excavators.
Australian Mining, vol.76, no.7, p.8-16.
T.S.Golosinski, 1984. Der Abbau der oelsaende in Alberta, Kanada.
Neue Bergbautechnik, vol.14, no.3, pp.91 to 96 (in German)
T.S.Golosinski and R.K.Singhal, 1984.
Productivity from Bucket Wheel Excavators . Australian Mining,
July.
R.K.Singhal and T.S.Golosinski, 1984. Technology Transfer from Oil Sand and Copper Mining to
Surface Coal Mining . Canada Centre for Mineral and Energy Technology (CANMET), Division Report
ERP/CRL 84-02(OP)
F.G.Boehm and T.S.Golosinski, 1983. Oelsandgewinnung in Kanada - eine bergtechnische
Herausforderung . Erzmetall, vol.36, no.7/8, pp. 339-347 (in German)
3

R.K.Singhal and T.S.Golosinski, 1983. Technology Transfer from Copper and Oil Sand Mining to
Surface Coal Mining . 2nd Coal Operators Conference of CIM, Sydney, Nova Scotia.
T.S.Golosinski, 1983. Der abbau der Oelsande in Alberta, Kanada.
XXXIV Berg und
Huettenmaennischer Tag, Bergakademie Freiberg, Germany, June 14 to 17 (in German).
T.S.Golosinski, 1983. Zur technologie der Oelsand extraktion.
XXXIV Berg und Huettenmaennischer
Tag, Bergakademie Freiberg, Germany, June 14 to 17 (in German).
T.S.Golosinski and R.K.Singhal, 1983. Estimation of a Bucket Wheel Excavator Production Rate .
Mining Equipment Selection Symposium, New Mexico Institute of Mining and Technology, Socorro,
New Mexico, April 21-23.
T.S.Golosinski, 1983. Relation Between a Bucket Wheel Excavator Design and Mining Face
Parameters . Mining Equipment Selection Symposium, New Mexico Institute of Mining and Technology,
Socorro, New Mexico, April 21-23.
T.S.Golosinski, 1982. Estimation of BWE Production Rates in Selective Mining.
IV Open Pit Operators
Conference of CIM, Edmonton, Canada.
R.K.Singhal and T.S.Golosinski, 1982.
Loading and Transportation in Surface Mining.
IV Open Pit
Operators Conference of CIM. Edmonton, Alberta.
T.S.Golosinski, 1980.
Mining Equipment in Oil Sands.
Applied Oilsands Geoscience Conference.
Edmonton, Alberta.
4