Bibliography
Abley, I., “Higher thermal performance and more space from thinner insulations”, Presented at the
3rd Global Insulation 2008, Barcelona, Spain, 16-17 October, 2008.
Abley, I., “Immediate prospects for vacuum insulation in the British site built housing sector”, In:
Proceedings of the 8th International Vacuum Insulation Symposium, Würzburg, Germany, 18-19
September, 2007.
Abley, I., Glass, J. and Edwards, D., “Upgradeable Masonry Architecture – Updating an
established Open Building approach”, In: Proceedings of ManuBuild 1st International Conference The Transformation of the Industry: Open Building Manufacturing, Rotterdam, The Netherlands,
25-26 April, 2007.
Ahmad M., Bontemps A. and Sallee H. et al., "Thermal testing and numerical simulation of a
prototype cell using light wallboards coupling vacuum isolation panels and phase change material",
Energy & Buildings, 2006, volume 38, number 6, 673-681.
Binz A., Moosmann A. et al., "Vacuum insulation in the building sector - systems and applications",
Vacuum Insulation in the Building Sector, Systems and Applications, Annex 39 "HiPTI – High
Performance Thermal Insulation" of IEA/ECBCS-Implementing Agreement, Report on Subtask B.
2005.
Brunner S., “Service Life Prediction for aircraft coatings - The story behind the Accelerated
Weathering Device for Service Life Prediction for Organic Coatings Materials”, ATLAS Technical
Conference for Accelerated Ageing and Evaluation (ATCAE), 11-12 May 2006, Ile des Embiez,
Sanary, France (made public on symposium CD)
Brunner S., Gasser P. and Simmler H. et al., "Investigation of multilayered aluminium-coated
polymer laminates by focused ion beam (FIB) etching", Surface & Coating Technology, 2006,
volume 200, number 20-21, 5908-5914.
Brunner S., Richner P., Müller U. et al., “Accelerated weathering device for service life prediction
of organic coating”, Polymer Testing, 2005, volume 24, number 1, 25-31.
Brunner S., Simmler H., “In Situ Performance Assessment and Service Life of Vacuum Insulation
Panels (VIPs) in Buildings”, In: Proceedings of 8th International Vacuum Insulation Symposium,
18-19 September 2007, Würzburg, Germany.
Brunner S., Simmler H., “In situ performance assessment of vacuum insulation panels in a flat roof
construction”, Vacuum, 2008, volume 82, number 7, 700–707.
Brunner S., Tharian P., Simmler H. et al., “Focused ion beam (FIB) etching to investigate
aluminium-coated polymer laminates subjected to heat and moisture loads”, Surface & Coatings
Technology, 2008, volume 202, number 24, 6054–6063.
Bundi R., Wakili K. and Frank T., "Vacuum insulated panels in building applications", In:
Proceedings of the CISBAT 2003 Conference, EPFL, Lausanne, Switzerland, 2003.
Caps R. and Fricke J., "Thermal conductivity of opacified powder filler materials for vacuum
insulations", International Journal of Thermophysics, 2000, volume 21, number 2, 445-452.
Caps R., "Monitoring gas pressure in vacuum insulation panels", In: Proceedings of 7th
International Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland, 2005, 57-66.
Caps R., “Vacuum Insulation Panels for Buildings and Technical Applications”, EPIC Conference,
20 November 2006, Lyon, France
Caps R., Beyrichen H., Kraus D. et al., “Quality control of vacuum insulation panels: Methods of
measuring gas pressure”, Vacuum, 2008, volume 82, number 7, 691-699.
Caps R., Fricke J. and Reis H., "Improving the extinction properties of an evacuated hightemperature powder insulation", High Temperatures - High Pressures, 1983, volume 15, 225-232.
Caps R., Heinemann U. and Ehrmanntraut M. et al., "Evacuated insulation panels filled with
Pyrogenic Silica Powders - Properties and Applications", High Temperatures - High Pressures,
2001, volume 33, number 2, 151-156.
Caps R., Heinemann U., Fricke J. et al., “Application of Vacuum Insulation in Buildings”, VIA
Symposium - Progress in Vacuum Insulation, June 2000, Vancouver.
Caps R., Hetfleisch J. and Retelbach T. et al., "Thermal conductivity of spun glass fibres as filler
material for vacuum insulations", In: K. E. Wilkes, R. B. Dinwiddie and R. S. Graves (ed.): Thermal
Conductivity 23, Proceedings of 23rd International Thermal Conductivity Conference (Nashville,
Tennessee, USA, 1995), Technomics Publishing Co. Inc., Lancaster PA, USA, 1996, 373-382.
Cauberg J. and Tenpierik M., "From VIP to building panel", In: Proceedings of 7th International
Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland, 2005, 161-172.
Cremers J., "Typology of applications for opaque and translucent VIP in the building envelope and
their potential for temporary thermal insulation", In: Proceedings of 7th International Vacuum
Insulation Symposium, EMPA, Duebendorf, Switzerland, 2005, 189-196.
De Vos R., Rosbotham D. and Deschaght J., "Open-celled polyurethane foam based vacuum
panel technology: a fully polyurethane based composite technology for vacuum insulated
appliances", Journal of Cellular Plastics, 1996, volume 32, number 5, 470-484.
Dreyer J., Bednar T. and Hecht C., "Evaluation of modern insulation systems by simulation
methods", In: Proceedings of the International Conference and Workshop on High Performance
Thermal Insulation Systems - Vacuum Insulated Products (VIP), International Energy Agency,
EMPA, Duebendorf, Switzerland, 2001, 101-106.
Eberhardt H., “Vacuum Insulation Panels (VIP) in energy efficient cooling appliances for improving
the environment of our children's world”, In: Proceedings of 8th International Vacuum Insulation
Symposium, 18-19 September 2007, Würzburg, Germany
Eberhardt H., “Vom Pulver zur Paneele – Wie entsteht ein VIP?”, In: Proceedings of 2nd VIP-Bau,
16-17 June 2005, Wismar, Germany
Erb M., “VIP's for buildings – Research and Development: Presentation of goal, project structure
and organisation of IEA R+D-programme”, In: Proceedings of the International Conference and
Workshop on High Performance Thermal Insulation Systems - Vacuum Insulated Products (VIP),
International Energy Agency, EMPA, Duebendorf, Switzerland, 2001.
Erb M., editor, “Vacuum Insulation: Panel Properties and Building Applications”, HiPTI,
IEA/ECBCS Annex 39, 2005.
Fine A., "Advanced evacuated thermal insulations: the state of the art", Journal of Thermal
Insulation, 1989, volume 12, number 3, 183-208.
Frick J., Schwab H. and Heinemann U., "Vacuum insulation panels - exciting thermal properties
and most challenging applications", International Journal of Thermophysics, 2006, volume 27,
number 4, 1123-1139.
Fricke J., Heinemann U. and Ebert H., “Vacuum Insulation Panels - from Research to Market”,
Vacuum, Special Issue on 'The World Energy Crisis Part 2: Some More Vacuum-based Solutions',
Vacuum 82 (2008), 680-690.
Glicksman R., "Two-dimensional heat transfer effects on vacuum and reflective insulations",
Journal of Thermal Insulation, 1991, volume 14, number 4, 281-294.
Guseva O., Brunner, S. and Richner, P., “Analysis of the environmental parameters for aircraft
coatings”. Macromolecular Symposia, 2002, volume 187, number 1, 883-894
Guseva O., Brunner, S. and Richner, P., “Service life prediction for aircraft coatings”. Polymer
Degradation and Stability, 2003, volume 82, number 1, 1-13.
Hamilton A., “An evaluation of the practical application and use of VACPAC panel technology”,
Vuoto scienza et tecnologia, 1999, volume 28, number 1-2, 27-30.
Heinemann U., "Influence of water on the total heat transfer in 'evacuated' insulations", In:
Proceedings of 7th International Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland,
2005, 23-34.
Heinemann U., “Influence of Water on the Total Heat Transfer in `Evacuated´ Insulations”,
International Journal of Thermophysics, 2008, volume 29, 735-749.
Heinemann U., Caps R. and Fricke J., “Characterization and Optimization of Filler Materials for
Vacuum Super Insulations”, Vuoto, Vol. XXVIII, N.1-2 – Gennaio-Giugno 1999, 43-46 Europ.
Workshop Vacuum Panel Technology for Superinsulations, Milano Nov. 1998.
Heinemann U., Caps R. and Fricke J., “Radiation-conduction interaction: an investigation on silica
aerogels”, International Journal of Heat and Mass Transfer, 1996, volume 39, number 10, 21152130.
Heinemann U., Hetfleisch J. and Fricke J., “Evacuable Guarded Hot Plate for Thermal Conductivity
Measurements between -200°C and 800°C”, In: Proceedings of 15th European. Conference on
Thermophysical Properties, September 1999, Würzburg, Germany.
Heinemann U., Hümmer E., Büttner D. et al., “Silica Aerogel – a Light-Transmitting Thermal
Superinsulator”, High Temp. – High Pressures, 1986, volume 18, number 5, 517-526.
Kraus D., Buttner D. and Heinemann U. et al., "Non-destructive method to determine the water
vapour pressure in vacuum insulation panels (VIP)", In: Proceedings of 7th International Vacuum
Insulation Symposium, EMPA, Duebendorf, Switzerland, 2005, 77-84.
Lefebvre G., "Ceramis packaging material for VIP", In: Proceedings of the International
Conference and Workshop on High Performance Thermal Insulation Systems - Vacuum Insulated
Products (VIP), International Energy Agency, EMPA, Duebendorf, Switzerland, 2001, 37-46.
Lucas E., Doescher M. and Ebenstein D. et al., "Silica aerogels with enhanced durability, 30-nm
mean pore-size, and improved immersibility in liquids", Journal of Non-Crystalline Solids, 2004,
volume 350, 244-252.
Manz H., Brunner S. and Wullschleger L., “Triple vacuum glazing: Heat transfer and basic
mechanical design constraints”, Solar Energy, 2006, volume 80, number 12, 1632-1642.
Materna R., "VIP's for advanced retrofit solutions for buildings", In: Proceedings of the International
Conference and Workshop on High Performance Thermal Insulation Systems - Vacuum Insulated
Products (VIP), International Energy Agency, EMPA, Duebendorf, Switzerland, 2001, 55-62.
Mohanan J. and Brock S., "A new addition to the aerogel community: unsupported CdS aerogels
with tunable optical properties", Journal of Non-Crystalline Solids, 2004, volume 350, 1-8.
Musgrave D., "Finite element analysis used to model VIP barrier film performance", In:
Proceedings of 7th International Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland,
2005, 99-104.
Nussbaumer T., Bundi R. and Tanner C. et al., "Thermal analysis of a wooden door system with
integrated vacuum insulation panels", Energy & Buildings, 2005, volume 37, number 11, 11071113.
Nussbaumer T., Wakili K. and Tanner C., "Experimental and numerical investigation of the thermal
performance of a protected vacuum insulation system applied to a concrete wall", Applied Energy,
2006, volume 83, number 8, 841-855.
Ogden R. and Kendrick C., "VIP cladding panels for buildings: applications and conceptual
solutions", In: Proceedings of 7th International Vacuum Insulation Symposium, EMPA, Duebendorf,
Switzerland, 2005, 153-160.
Pendergast P.and Malone B., "Characterization and commercialization of INSTILL vacuum
insulation core, a unique polystyrene vacuum insulation filler from the Dow Chemical Company",
Vuoto scienza et tecnologia, 1999, volume 28, number 1-2, 77-82.
Potter F., "Nanogel - production, properties, applications", In: Proceedings of the International
Conference and Workshop on High Performance Thermal Insulation Systems - Vacuum Insulated
Products (VIP), International Energy Agency, EMPA, Duebendorf, Switzerland, 2001, 33-36.
Quenard D. and Sallee H., "From VIP's to building facades: three levels of thermal bridges", In:
Proceedings of 7th International Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland,
2005, 113-120.
Randel P., "Vacuum insulation panel with fumed silica", In: Proceedings of the International
Conference and Workshop on High Performance Thermal Insulation Systems - Vacuum Insulated
Products (VIP), International Energy Agency, EMPA, Duebendorf, Switzerland, 2001, 27-32.
Reichenauer G., Heinemann U. and Ebert H., “Relationship between pore size and the gas
pressure dependence of the gaseous thermal conductivity”, Colloids and Surfaces A:
Physicochemical and Engineering Aspects, 2007, volume 300, number 1-2, 204-210.
Reim M., Reichenauer G. and Korner W. et al., "Silica-aerogel granulate - structure, optical and
thermal properties", Journal of Non-Crystalline Solids, 2004, volume 350, 358-363.
Reuter R., Sextl G. and Degussa A., "Vacuum insulation panels (VIPs)", In: Non-Fluorocarbon
Insulation, Refrigeration and Air-Conditioning Technology Workshop, Wiesbaden, Germany, 1993.
Roderick K., Glover B. and Smith D., "Applications of vacuum insulation panels in extreme
environments", In: Proceedings of 7th International Vacuum Insulation Symposium, EMPA,
Duebendorf, Switzerland, 2005, 85-90.
Rudtsch S., "Thermal conductivity measurements for the separation of heat and mass diffusion in
moist porous materials", High Temperatures - High Pressures, 2000, volume 32, number 4, 487491.
Schwab H., Heinemann U. and Beck A. et al., "Dependence of thermal conductivity on water
content in vacuum insulation panels filled with fumed silica kernels", Journal of Thermal Envelope
& Building Science, 2005, volume 28, number 4, 319-326.
Schwab H., Heinemann U. and Beck A. et al., "Prediction of service life for vacuum insulation
panels with fumed silica kernel and foil cover", Journal of Thermal Envelope & Building Science,
2005, volume 28, number 4, 357-374.
Schwab H., Heinemann U. and Beck A., "Permeation of different gases through foils used as
envelopes for vacuum insulation panels", Journal of Thermal Envelope & Building Science, 2005,
volume 28, number 4, 293-317.
Schwab H., Heinemann U., Wachtel J. et al., "Predictions for the increase in pressure and water
content of Vacuum Insulation Panels (VIPs) Integrated into Building Constructions using Model
Calculations", Journal of Thermal Envelope & Building Science, 2005, volume 28, number 4, 327344.
Schwab H., Stark C. and Wachtel J. et al., "Thermal bridges in vacuum-insulated building facades",
Journal of Thermal Envelope & Building Science, 2005, volume 28, number 4, 345-355.
Simmler H. and Brunner S., "Aging and service life of VIP in buildings", In: Proceedings of 7th
International Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland, 2005, 15-22.
Simmler H. and Brunner S., "Vacuum insulation panels for building application: Basic properties,
ageing mechanisms and service life", Energy & Buildings, 2005, volume 37, number 11, 11221131.
Simmler H., Brunner S. and Heinemann et al., “Vacuum Insulation Panels - Study on VIPcomponents and Panels for Service Life Prediction of VIP in Building Applications”, Annex 39
"HiPTI – High Performance Thermal Insulation" of IEA/ECBCS-Implementing Agreement, Report
on Subtask A. 2005.
Tao W., Chang C. and Lin J., "An energy-efficiency, performance study of, vacuum insulation
panels", Journal of Cellular Plastics, 2000, volume 36, number 6, 441-450.
Tenpierik M. and Cauberg H., "Analytical models for calculating thermal bridge effects caused by
thin high barrier envelopes around vacuum insulation panels", Journal of Building Physics, 2007,
volume 30, number 3, 185-215.
Tenpierik M. and Cauberg J., "Vacuum insulation panels in building facades: moisture and
temperature conditions during insolation", In: Proceedings of the 7th Symposium on Building
Physics in the Nordic Countries, The Iceland Building Research Institute, Reykjavik, Iceland, 2005,
937-944.
Tenpierik M., Cauberg J. and Thorsell T., "Integrating vacuum insulation panels in building
constructions: an integral perspective", Construction Innovation: Information, Process,
Management, 2007, volume 7, number 1, 38-53.
Thorsell T. and Kallebrink I., "Edge loss minimization in vacuum insulation panels", In:
Proceedings of the 7th Symposium on Building Physics in the Nordic Countries, The Iceland
Building Research Institute, Reykjavik, Iceland, 2005, 945-952.
Wakili K., Bundi R. and Binder B., "Effective thermal conductivity of vacuum insulation panels",
Building Research & Information, 2004, volume 32, number 4, 293-299.
Wang X., Walliman N., Ogden R. et al., “VIP and their applications in buildings: a review”,
Proceedings of the Institution of Civil Engineers – Construction Materials, 2007, volume 160,
number 4, 145-153.
Willems W. and Schild K., "Numerical investigation on thermal bridge effects in vacuum insulating
elements", In: Proceedings of 7th International Vacuum Insulation Symposium, EMPA,
Duebendorf, Switzerland, 2005, 145-152.
Winkler H. and Mainka G., "Development and first experiences of a prefabricated VIP-sandwichelement for fast and secure application on building surfaces", In: Proceedings of 7th International
Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland, 2005, 121-130.
Zwerger M. and Klein H., "Integration of VIP's into external wall insulation system", In: Proceedings
of 7th International Vacuum Insulation Symposium, EMPA, Duebendorf, Switzerland, 2005, 173179.