ISO Update
Supplement to ISO Focus+
June
2013
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 May to 31 May 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 271
Compliance programs
ISO/CD 18386
Compliance programs
TC 4
Rolling bearings
ISO/CD 21107
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance
criteria identified by attribute vocabulary
TC 21
Equipment for fire protection and fire fighting
ISO/CD 16852
Flame arresters — Performance requirements, test methods and limits for use
ISO/CD 1452012
Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant
ISO/CD 1452013
Gaseous fire-extinguishing systems — Physical properties and system design — Part 13: IG-100 extinguishant
ISO/CD 1452014
Gaseous fire-extinguishing systems — Physical properties and system design — Part 14: IG-55 extinguishant
ISO/CD 1452015
Gaseous fire-extinguishing systems — Physical properties and system design — Part 15: IG-541 extinguishant
TC 22
Road vehicles
ISO/CD 6519
Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
ISO/CD 121031
Road vehicles — Test dust for filter evaluation — Part 1: Arizona test dust
TC 23
Tractors and machinery for agriculture and forestry
ISO/CD 136932
Irrigation equipment — Safety devices for chemigation — Part 2: Chemigation valve assemblies from DN 75 to DN 350
TC 27
Solid mineral fuels
ISO/CD 139091
Hard coal and coke — Mechanical sampling — Part 1: General introduction
ISO/CD 139092
Hard coal and coke — Mechanical sampling — Part 2: Coal — Sampling from moving streams
ISO/CD 139093
Hard coal and coke — Mechanical sampling — Part 3: Coal — Sampling from stationary lots
ISO/CD 139094
Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples
ISO/CD 139095
Hard coal and coke — Mechanical sampling — Part 5: Coke — Sampling from moving streams
ISO/CD 139096
Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples
ISO/CD 139097
Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing
ISO/CD 139098
Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias
ISO/CD 18806
Solid mineral fuels — Determination of Chlorine content
TC 34
Food products
ISO/CD 18301
Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) — Oscillating Utube method
ISO/CD 18363
Animal and vegetables fats and oils — Determination of fatty-acid-bound 3-chloropropane-1,2-diol (3-MCPD) and 2,3-epoxipropane-1-ol (glycidol) — Differential method using GC/MS
ISO/DTS
22003
Food safety management systems — Requirements for bodies providing audit and certification of food safety management
systems
TC 38
Textiles
ISO/CD 180801
Textiles — Test methods for evaluating the electrostatic propensity of fabrics- — Part 1: Test method using corona charging
ISO/CD 180802
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction
ISO/CD 180803
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 3: Test method using manual friction
ISO/CD 180804
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 4: Test method using horizontal mechanical friction
TC 39
Machine tools
ISO/CD 160901
Machines tools — Safety — Machining centres — Part 1: Safety
TC 43
Acoustics
ISO 174971:2004/CD
Amd 1
Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient
in a reverberation room — Amendment 1
TC 48
Laboratory equipment
ISO/CD 4797
Laboratory glassware — Boiling flasks with conical ground joints
TC 61
Plastics
ISO/CD 672110
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO/CD 18247
Plastics — Determination of the shear viscosity of polymer melts using screw-type rheometers
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 1166511
Measurement of radioactivity in the environment — Air: radon-222 — Part 11: Test method for soil gaz
TC 106
Dentistry
ISO/CD 17509
Dentistry — Torque transmitter for handpieces
ISO/CD 10650
Dentistry — Powered polymerization activators — Quartz tungsten halogen lamps and light emitting diode (LED) lamps
TC 107
Metallic and other inorganic coatings
ISO/CD 18555
Determination of thermal conductivity of thermal barrier coatings
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD 7626-2
Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
TC 122
Packaging
ISO/CD 780
Packaging — Pictorial marking for handling of goods
TC 130
Graphic technology
ISO/CD 16763
Graphic technology — Requirements for postpress — Bound products
ISO/CD 179721
Graphic technology — Colour data exchange using CxF — Part 1: Relationship to CxF3
TC 131
Fluid power systems
ISO/CD 6020-2
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
ISO/CD 6020-3
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series
with bores from 250 mm to 500 mm
ISO/CD 12829
Hydraulic fluid power — Spin-on filters with finite lives — Method for verifying the fatigue life rating and the burst pressure
rating of the pressure containing envelope
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 18851
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the
structural design of fittings
TC 146
Air quality
ISO/CD 1600020
Indoor air — Part 20: Detection and enumeration of moulds — Determination of total spore count
TC 147
Water quality
ISO/CD 18635
Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment and suspended (particulate)
matter — Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
TC 150
Implants for surgery
ISO/CD 13356
Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
TC 154
Processes, data elements and documents in commerce, industry and administration
ISO/CD 15000-
Electronic Business Extensible Markup Language (ebXML) — Part 5: ebXML Core Components Technical Specification,
5
Version 2.01(ebCCTS)
TC 164
Mechanical testing of metals
ISO/CD 18338
Metallic materials — Torsion test at ambient temperature
TC 171
Document management applications
ISO/CD 320002
Document management — Portable document format — Part 2: PDF 2.0
TC 172
Optics and photonics
ISO
8624:2011/CD
Amd 1
Ophthalmic optics — Spectacle frames — Measuring system and terminology — Amendment 1
ISO/CD 103221
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for single-vision and multifocal lens
blanks
ISO/CD 103222
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 2: Specifications for progressive power lens blanks
ISO/CD 13694
Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution
TC 188
Small craft
ISO/CD 18854
Small craft — Test bed measurement of gaseous and particulate exhaust emissions from reciprocating internal combustion
engines
TC 190
Soil quality
ISO/CD 18311
Soil quality — Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms — Bait-lamina
test
TC 198
Sterilization of health care products
ISO/CD 18362
Processing of cell-based health care products
TC 204
Intelligent transport systems
ISO/DTS
17426
Intelligent transport systems — Co-operative systems — Contextual speeds
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
ISO/CD 16782
Clinical laboratory testing - Criteria for acceptable lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing
TC 215
Health informatics
ISO/DTR
28380-3
Health informatics — Messages and Communication — IHE Global Standards Adoption Process — Part 3: Deployment
TC 219
Floor coverings
ISO/CD 18168
Textile floor coverings — Colour fastness to shampooing
TC 228
Tourism and related services
ISO/CD 13687
"Yachting clubs": The standardization of tourist services in yachting clubs and marinas
JTC 1
Information technology
ISO/IEC CD
29182-6
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 6: Applications
ISO/IEC CD
30120
Information technology — Software Engineering - IT Audit — Audit
guidelines that support the evaluation of the governance of IT
ISO/IEC PDTS
18661
Information Technology — Floating Point Extensions for C
ISO/IEC CD
29190
Proposal on Privacy capability assessment model
ISO/IEC CD
23008-8
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: HEVC Conformance Testing
ISO/IEC CD
23008-10
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 10:
ISO/IEC CD
18000-4
Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz Mode 3
ISO/IEC CD
19762
Information technology — Automatic identification and data capture techniques — Harmonized vocabulary
ISO/IEC CD
29167-14
Information technology — Automatic identification and data capture techniques — Part 14: Air Interface for security services
crypto suite - AES OFB-like
ISO/IEC PDTR
15440
Information technology — Future keyboards and other input devices and entry methods
ISO/IEC CD
19788-8
Information technology — Learning, education and training — Metadata for learning resources — Part 8: Data elements for
MLR records
ISO/IEC CD
19788-9
Information technology — Learning, education and training — Metadata for learning resources — Part 9: Data elements for
Persons
ISO/IEC CD
36001
Quality for learning, education and training — Management systems — Requirements
ISO/IEC CD
17789
Information Technology — Cloud Computing — Reference Architecture
DIS circulated
Period from 01 May to 31 May 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
JTC 2
ISO/IEC DIS
13273-1
Joint Project Committee - Energy efficiency and renewable energy sources - Common
terminology
*
Energy efficiency and renewable energy sources — Common international terminology — Part 1: Energy
Efficiency
201309-07
ISO/IEC DIS
13273-2
*
TC 8
ISO/DIS
28004-3
Energy efficiency and renewable energy sources — Common international terminology — Part 2: Renewable Energy Sources
201309-07
Ships and marine technology
*
Security management systems for the supply chain - Guidelines for the implementation of ISO 28000 —
Part 3: Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other
than marine ports)
201308-08
(Revision of ISO/PAS 28004-3:2012)
ISO/DIS
16145-5
*
ISO/DIS 14884
*
Ships and marine technology - Protective coatings and inspection method — Part 5: Assessment method
for coating damages
201308-31
Large Yachts - Weathertight Doors - Strength and weathertightness requirements
201308-14
TC 10
Technical product documentation
ISO/DIS
14084-1
*
ISO/DIS
14084-2
*
201308-11
Process diagrams for power plants — Part 2: Graphical symbols
201308-07
TC 20
ISO/DIS 27027
Process diagrams for power plants — Part 1: Specification for diagrams
Aircraft and space vehicles
*
Aerospace — Solid-state remote power controllers — General performance requirements
201308-18
(Revision of ISO 27027:2008)
ISO/DIS 15845
ISO/DIS 21100
*
*
Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements
201308-29
Air cargo unit load devices — Performance requirements and test parameters
201308-03
ISO/DIS 16694
*
Space systems — The measured parameters at firing bench and flight tests of liquid rocket engines
201308-03
ISO/DIS 16699
*
Space systems — Disposal of orbital launch stages
201308-03
ISO/DIS 16781
*
Space systems — Simulation requirements for control system
201308-13
TC 21
Equipment for fire protection and fire fighting
ISO/DIS 70765
*
201308-16
TC 22
ISO/DIS 16505
Road vehicles
*
TC 23
ISO/DIS
11783-7
Fire protection — Foam fire extinguishing systems — Part 5: Compressed air foam equipment
Road vehicles — Ergonomic and performance aspects of Camera-Monitor Systems — Requirements and
test procedures
201308-30
Tractors and machinery for agriculture and forestry
*
Tractors and machinery for agriculture and forestry — Serial control and communications data network —
Part 7: Implement messages application layer
201308-21
(Revision of ISO 11783-7:2009)
TC 28
ISO/DIS 16861
Petroleum products and lubricants
*
Petroleum products — Fuels (class F) — Specifications of Dimethylether (DME)
201308-11
ISO/DIS 17306
ISO/DIS 17307
*
*
Petroleum products — Biodiesel — Determination of free and total
glycerin and mono-, di- and tracylglycerols by gas chromatography
201308-08
Petroleum products — Biodiesel — Determination of total esters content by gas chromatography
201308-08
ISO/DIS 17315
*
Ethanol — Determination of total acidity by potenciometric titration
201308-04
TC 29
Small tools
ISO/DIS 60317.2
*
ISO/DIS
11901-3
*
ISO/DIS
11901-4
*
201307-16
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact build
height
201308-28
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same build height
201308-28
TC 31
ISO/DIS 42511
Bonded abrasive products — Dimensions — Part 17: Spindle mounted wheels
Tyres, rims and valves
*
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation
and dimensions, and approved rim contours
201308-18
(Revision of ISO 4251-1:2005, ISO 4251-1:2005/Amd 1:2012)
ISO/DIS 42512
*
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings
2013-
08-18
(Revision of ISO 4251-2:2005, ISO 4251-2:2005/Amd 1:2011)
TC 35
ISO/DIS 17463
Paints and varnishes
*
TC 38
201310-03
Textiles
ISO/DIS
17299-1
*
ISO/DIS
17299-2
*
ISO/DIS
17299-3
*
Textiles — Determination of deodorant property — Part 1: General principle
201308-21
Textiles — Determination of deodorant property — Part 2: Detector tube method
201308-21
Textiles — Determination of deodorant property — Part 3: Gas chromatography method
201308-21
TC 46
ISO/DIS 11620
Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by
accelerated cyclic electrochemical technique
Information and documentation
*
Information and documentation — Library performance indicators
201308-07
(Revision of ISO 11620:2008)
TC 58
Gas cylinders
ISO
13341:2010/D
Amd 1
*
ISO/DIS 16148
*
Gas cylinders — Fitting of valves to gas cylinders — Amendment 1
201310-03
Gas cylinders - Refillable seamless steel gas cylinders and tubes — Acoustic emission examination (AT)
and follow-up ultrasonic examination (UT) for periodic inspection and testing
201310-10
(Revision of ISO 16148:2006)
TC 61
Plastics
ISO/DIS
11358-3.3
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the
Ozawa-Friedman plot and analysis of the reaction kinetics
ISO/DIS
13106.2
*
Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs
201307-16
TC 67
ISO/DIS 17945
201307-25
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
*
Materials resistant to sulfide stress cracking in corrosive petroleum refining environments
201310-17
TC 68
ISO/DIS 9362
Financial services
*
Banking — Banking telecommunication messages — Business identifier code (BIC)
201308-24
(Revision of ISO 9362:2009)
TC 71
ISO/DIS
13315-2
Concrete, reinforced concrete and pre-stressed concrete
*
TC 72
ISO/DIS 11676
Environmental management for concrete and concrete structures — Part 2: System boundary and inventory
data
201308-18
Textile machinery and accessories
*
Textile machinery and accessories — Pattern disks and pattern chains for warp knitting machines — Vocabulary and symbols
201308-13
(Revision of ISO 11676:1994)
ISO/DIS 12912
*
Circular knitting machines — Vocabulary
201308-13
TC 81
ISO/DIS 765
Common names for pesticides and other agrochemicals
*
Pesticides considered not to require common names
201308-25
(Revision of ISO 765:1976)
TC 85
ISO/DIS 21613
Nuclear energy, nuclear technologies, and radiological protection
*
(U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine
201308-29
TC 87
ISO/DIS 9986
Cork
*
Composition cork for shoe outsoles
201308-25
(Revision of ISO 9986:1990)
TC 92
ISO/DIS 56601
Fire safety
*
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate
(cone calorimeter method) and smoke production rate (dynamic measurement)
201308-25
(Revision of ISO 5660-1:2002)
ISO/DIS 17554
*
Reaction to fire tests — Mass loss measurement
201308-28
(Revision of ISO 17554:2005)
TC 106
Dentistry
ISO/DIS 13116
*
Dentistry — Test Method for Determining Radio-Opacity of Materials
201310-24
ISO/DIS 15841
*
Dentistry — Wires for use in orthodontics
201310-17
(Revision of ISO 15841:2006)
ISO/DIS 9680
*
Dentistry — Operating lights
201310-17
(Revision of ISO 9680:2007)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 1606322:2005/DAmd
1
*
ISO/DIS
16063-42
*
ISO 53492:2001/DAmd
1
*
TC 113
ISO/DIS 4375
Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison
to a reference transducer — Amendment 1
Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with
high accuracy using acceleration of gravity
Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration —
Part 2: Practical guidance for measurement at the workplace — Amendment 1
201308-17
201308-21
201310-10
Hydrometry
*
Hydrometric determinations — Cableway systems for stream gauging
201310-10
(Revision of ISO 4375:2000)
TC 115
ISO/DIS 14414
Pumps
*
Pump system energy assessment
201310-17
TC 120
ISO/DIS 14931
Leather
*
Leather — Guide to the selection of leather for apparel (excluding furs)
201310-17
(Revision of ISO 14931:2004)
TC 121
ISO/DIS 73961
Anaesthetic and respiratory equipment
*
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
201310-24
(Revision of ISO 7396-1:2007, ISO 7396-1:2007/Amd 1:2010, ISO 7396-1:2007/Amd 2:2010)
TC 131
Fluid power systems
ISO/DIS 72411
*
Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements
201308-14
(Revision of ISO 7241-1:1987)
ISO/DIS 69531
*
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
201308-11
(Revision of ISO 6953-1:2000, ISO 6953-1:2000/Cor 1:2006)
ISO/DIS 69532
*
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods
to determine the main characteristics to be included in literature from suppliers
201308-11
(Revision of ISO 6953-2:2000)
ISO/DIS
10767-1
*
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components —
Part 1: Method for determining source flow ripple and source impedance of pumps
201308-17
(Revision of ISO 10767-1:1996)
TC 135
ISO/DIS 99341
Non-destructive testing
*
Non-destructive testing — Magnetic particle testing — Part 1: General principles
201310-24
(Revision of ISO 9934-1:2001)
ISO/DIS 99342
*
Non-destructive testing — Magnetic particle testing — Part 2: Detection media
201310-24
(Revision of ISO 9934-2:2002)
ISO/DIS 99343
*
Non-destructive testing — Magnetic particle testing — Part 3: Equipment
201310-24
(Revision of ISO 9934-3:2002)
TC 138
ISO/DIS 9967
Plastics pipes, fittings and valves for the transport of fluids
*
Thermoplastics pipes — Determination of creep ratio
201310-03
(Revision of ISO 9967:2007)
ISO/DIS 9969
*
Thermoplastics pipes — Determination of ring stiffness
201310-03
(Revision of ISO 9969:2007)
TC 147
ISO/DIS 566714
Water quality
*
Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental
water sampling and handling
201308-18
(Revision of ISO 5667-14:1998)
TC 150
ISO/DIS
14243-3
Implants for surgery
*
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters
for wear-testing machines with displacement control and corresponding environmental conditions for test
201308-13
(Revision of ISO 14243-3:2004, ISO 14243-3:2004/Cor 1:2006)
TC 172
ISO/DIS 902223
Optics and photonics
*
Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient
temperature and dry and damp heat
201308-04
(Revision of ISO 9022-5:1994, ISO 9022-18:1994, ISO 9022-21:1998)
ISO/DIS 10109
*
Optics and photonics — Guidance for the selection of environmental tests
201308-04
(Revision of ISO 10109-7:2001, ISO 10109-11:2001, ISO 10109-12:2004, ISO 10109-1:2005, ISO 101096:2005, ISO 10109-8:2005)
ISO/DIS
10110-5
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form
tolerances
201308-28
(Revision of ISO 10110-5:2007)
ISO/DIS
10110-6
*
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
201308-28
(Revision of ISO 10110-6:1996, ISO 10110-6:1996/Cor 1:1999)
ISO/DIS
10110-19
*
ISO/DIS
14999-4
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: Optical
freeform surfaces
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4:
Interpretation and evaluation of tolerances specified in ISO 10110
201308-28
201308-28
(Revision of ISO 14999-4:2007)
ISO/DIS 17328
ISO/DIS 9849
*
*
Optics and photonics — Optical materials and components — Test method for refractive index of infrared
optical materials
201308-04
Optics and optical instruments — Geodetic and surveying instruments — Vocabulary
201308-30
(Revision of ISO 9849:2000)
ISO 119799:2006/DAmd
1
*
ISO 1197910:2006/DAmd
*
Ophthalmic implants — Intraocular lenses — Part 9: Multifocal intraocular lenses — Amendment 1
201310-10
Ophthalmic implants — Intraocular lenses — Part 10: Phakic intraocular lenses — Amendment 1
2013-
1
10-10
TC 181
Safety of toys
ISO 81241:2012/DAmd
1
*
ISO/DIS 81242
*
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1:
Projectiles, rotors and propellers
201308-07
Safety of toys — Part 2: Flammability
201308-14
(Revision of ISO 8124-2:2007)
TC 189
ISO/DIS
13007-1
Ceramic tile
*
Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives
201308-13
(Revision of ISO 13007-1:2010)
TC 190
Soil quality
ISO/DIS
16558-1
*
ISO/DIS
16558-2
*
ISO/DIS
11268-3
*
Soil quality — Risk based petroleum hydrocarbons — Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)
Soil quality — Risk-based petroleum hydrocarbons — Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection
(GC/FID)
Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in
field situations
201310-31
201310-31
201308-25
(Revision of ISO 11268-3:1999)
TC 204
ISO/DIS
24534-3
Intelligent transport systems
*
Intelligent transport systems — Automatic vehicle and equipment identification — Electronic registration
identification (ERI) for vehicles — Part 3: Vehicle data
201310-03
(Revision of ISO 24534-3:2010)
TC 206
ISO/DIS
18560-1
Fine ceramics
*
TC 244
ISO/DIS
13577-4
201308-22
Industrial furnaces and associated processing equipment
*
Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
201308-28
TC 247
ISO/DIS 16678
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment — Part 1: Removal of formaldehyde
Fraud countermeasures and controls
*
GuideIines for interoperable object identification and related authentication systems to deter counterfeiting
and illicit trade
2013-
08-26
TC 268
ISO/DIS 37120
Sustainable development in communities
*
Sustainable development and resilience of communities — Indicators for city services and quality of life
201308-28
JTC 1
ISO/IEC DIS
7811-1
Information technology
*
Identification cards — Recording technique — Part 1: Embossing
201308-28
(Revision of ISO/IEC 7811-1:2002)
ISO/IEC DIS
7811-2
*
Identification cards — Recording technique — Part 2: Magnetic stripe
201308-28
(Revision of ISO/IEC 7811-2:2001)
ISO/IEC DIS
7811-6
*
Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity
201308-28
(Revision of ISO/IEC 7811-6:2008, ISO/IEC 7811-6:2008/Cor 1:2010)
ISO/IEC DIS
7811-7
*
Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity, high density
201308-28
(Revision of ISO/IEC 7811-7:2004)
ISO/IEC DIS
7811-8
*
Identification cards — Recording technique — Part 8: Magnetic stripe — Coercivity of 51,7 kA/m (650 Oe)
201308-28
(Revision of ISO/IEC 7811-8:2008)
ISO/IEC DIS
10373-2
*
Identification cards — Test methods — Part 2: Cards with magnetic stripes
201308-28
(Revision of ISO/IEC 10373-2:2006, ISO/IEC 10373-2:2006/Cor 1:2010)
ISO/IEC DIS
11694-5
*
Identification cards — Optical memory cards — Linear recording method — Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
201308-18
(Revision of ISO/IEC 11694-5:2006)
ISO/IEC DIS
11694-6
*
Identification cards — Optical memory cards — Linear recording method — Part 6: Use of biometrics on an
optical memory card
201308-18
(Revision of ISO/IEC 11694-6:2006)
ISO/IEC DIS
20006-1
*
Information Technology for Learning, Education and Training — Information Model for Competency — Part
1: Competency General Framework and Information Model
201308-18
FDIS circulated
Period from 01 May to 31 May 2013
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote
terminates
TC 1
ISO/FDIS 9651
Screw threads
*
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
201307-29
(Revision of ISO 965-1:1998, ISO 965-1:1998/Cor 1:2009)
TC 2
Fasteners
ISO/FDIS
14581
*
ISO/FDIS
14582
*
201307-24
Rolling bearings
*
TC 23
Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and
tolerances — Amendment 1: Tolerances for shaft raceway
201307-11
Tractors and machinery for agriculture and forestry
ISO
10517:2009/F
DAmd 1
*
ISO/FDIS
11783-14.2
*
Powered hand-held hedge trimmers — Safety — Amendment 1
201307-03
TC 24
ISO/FDIS
20998-2
Hexalobular socket countersunk head screws, high head
201307-24
TC 4
ISO
1206:2001/FD
Amd 1
Fasteners — Hexalobular socket countersunk flat head screws
Tractors and machinery for agriculture and forestry — Serial control and communications data network —
Part 14: Sequence control
201307-24
Particle characterization including sieving
*
Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory
201307-07
ISO/FDIS
3310-2
*
Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
201307-21
(Revision of ISO 3310-2:1999)
TC 27
ISO/FDIS 334
Solid mineral fuels
*
Solid mineral fuels — Determination of total sulfur — Eschka method
201307-09
(Revision of ISO 334:1992)
ISO/FDIS
23380
*
Selection of methods for the determination of trace elements in coal
201307-07
(Revision of ISO 23380:2008)
TC 28
ISO/FDIS 5163
Petroleum products and lubricants
*
Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method
201307-17
(Revision of ISO 5163:2005, ISO 5163:2005/Cor 1:2008)
ISO/FDIS 5164
*
Petroleum products — Determination of knock characteristics of motor fuels — Research method
201307-17
(Revision of ISO 5164:2005)
TC 29
ISO/FDIS
3338-2
Small tools
*
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
201307-07
(Revision of ISO 3338-2:2007)
ISO/FDIS
10649-1
*
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
201307-17
(Revision of ISO 10649-1:2010)
ISO/FDIS
10649-2
*
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with
taper interface with flange contact surface
201307-17
(Revision of ISO 10649-2:2010)
ISO/FDIS
10649-3
*
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with
7/24 taper for automatic tool changer
201307-17
(Revision of ISO 10649-3:2010)
ISO/FDIS
10649-4
*
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with
7/24 taper without automatic tool changer
2013-
07-17
(Revision of ISO 10649-4:2010)
TC 33
ISO/FDIS
16334
Refractories
*
201307-08
TC 34
ISO/FDIS 9622
Monolithic refractory products — Determination of resistance to explosive spalling
Food products
*
Milk and liquid milk products — Guidelines for the application of mid-infrared spectrometry
201307-17
(Revision of ISO 9622:1999)
ISO/FDIS
13495
*
TC 35
ISO/FDIS
11997-2
Foodstuffs — Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
201307-18
Paints and varnishes
*
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt
fog)/dry/humidity/UV light
201307-17
(Revision of ISO 11997-2:2000)
ISO/FDIS
15528
*
Paints, varnishes and raw materials for paints and varnishes — Sampling
201307-17
(Revision of ISO 15528:2000)
TC 39
ISO 23010:2011/FDAm
d1
Machine tools
*
TC 44
ISO/FDIS
14113
Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of
numerically controlled machine tools — Amendment 1: Measuring performance with scanning probes
201307-30
Welding and allied processes
*
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up
to 450 bar (45 MPa)
201308-03
(Revision of ISO 14113:2007)
TC 45
ISO/FDIS
17278
Rubber and rubber products
*
201307-07
TC 58
ISO/FDIS 3807
Rubber, raw natural — Determination of the gel content of technically specified rubber (TSR)
Gas cylinders
*
Gas cylinders — Acetylene cylinders — Basic requirements and type testing
201307-03
(Revision of ISO 3807-1:2000, ISO 3807-2:2000, ISO/NP 3807-1, ISO/NP 3807-2)
ISO/FDIS
12209
*
Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air
201307-17
(Revision of ISO 12209-1:2000, ISO 12209-2:2000, ISO 12209-3:2000)
TC 61
ISO/FDIS
4892-3
Plastics
*
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
201307-24
(Revision of ISO 4892-3:2006)
TC 69
ISO/FDIS
22514-2
Applications of statistical methods
*
Statistical methods in process management — Capability and performance — Part 2: Process capability
and performance of time-dependent process models
201307-08
(Revision of ISO 21747:2006)
TC 70
ISO/FDIS
4548-13
Internal combustion engines
*
TC 83
ISO/FDIS
20957-1
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst
pressure test for composite filter housings
201307-08
Sports and other recreational facilities and equipment
*
Stationary training equipment — Part 1: General safety requirements and test methods
201307-17
(Revision of ISO 20957-1:2005)
TC 85
ISO/FDIS
12749-2
Nuclear energy, nuclear technologies, and radiological protection
*
TC 92
ISO/FDIS
29904
201307-22
Fire safety
*
Fire chemistry — Generation and measurement of aerosols
201307-07
TC 93
ISO/FDIS 5379
Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological
protection
Starch (including derivatives and by-products)
*
Starches and derived products — Determination of sulfur dioxide content — Acidimetric method and nephelometric method
201307-17
(Revision of ISO 5379:1983)
ISO/FDIS
10504
*
Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance liquid chromatography
(Revision of ISO 10504:1998)
201307-17
TC 106
ISO/FDIS
28888
Dentistry
*
201307-31
TC 110
ISO/FDIS
3691-6
Dentistry — Screening method for erosion potential of oral rinses on dental hard tissues
Industrial trucks
*
Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers
201307-03
(Revision of ISO 3691:1980)
TC 121
Anaesthetic and respiratory equipment
IEC 80601-230:2009/FDAm
d1
Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers — Amendment 1
TC 123
Plain bearings
ISO/FDIS
12130-2
*
201307-06
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2:
Functions for calculation of tilting pad thrust bearings
(Revision of ISO 12130-2:2001)
TC 126
ISO/FDIS
20773
Tobacco and tobacco products
*
Cigarettes — Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke —
Method using a routine analytical linear smoking machine equipped with a fishtail chimney
201307-03
(Revision of ISO 20773:2007)
ISO/FDIS
20774
*
Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using a routine analytical
linear smoking machine equipped with a fishtail chimney
201307-03
(Revision of ISO 20774:2007)
TC 147
Water quality
ISO/FDIS
17378-1
*
ISO/FDIS
17378-2
*
Water quality — Determination of arsenic and antimony — Part 1: Method using hydride generation atomic
fluorescence spectrometry (HG-AFS)
Water quality — Determination of arsenic and antimony — Part 2: Method using hydride generation atomic
absorption spectrometry (HG-AAS)
201307-17
201307-17
(Revision of ISO 11969:1996)
ISO/FDIS
13164-1
*
ISO/FDIS
13164-2
*
ISO/FDIS
*
Water quality — Radon-222 — Part 1: General principles
201307-07
Water quality — Radon-222 — Part 2: Test method using gamma-ray spectrometry
201307-07
Water quality — Radon-222 — Part 3: Test method using emanometry
13164-3
201307-07
TC 150
ISO/FDIS
16087
Implants for surgery
*
TC 159
ISO/FDIS
11064-4
Implants for surgery — Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
201307-31
Ergonomics
*
Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
201307-24
(Revision of ISO 11064-4:2004)
TC 164
ISO/FDIS
18265
Mechanical testing of metals
*
Metallic materials — Conversion of hardness values
201307-03
(Revision of ISO 18265:2003)
TC 172
ISO/FDIS
8255-2
Optics and photonics
*
Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging
201307-22
(Revision of ISO 8255-2:1997)
TC 190
Soil quality
ISO/FDIS
28258
*
ISO/FDIS
29200
*
201307-24
Soil quality — Assessment of genotoxic effects on higher plants — Vicia faba micronucleus test
201307-23
TC 199
ISO/FDIS
14119
Soil quality — Digital exchange of soil-related data
Safety of machinery
*
Safety of machinery — Interlocking devices associated with guards — Principles for design and selection
201307-24
(Revision of ISO 14119:1998, ISO 14119:1998/Amd 1:2007)
TC 218
ISO/FDIS 8965
Timber
*
Logging industry — Technology — Terms and definitions
201307-29
(Revision of ISO 8965:1987)
TC 223
ISO/FDIS
22398
Societal security
*
Societal security — Guidelines for exercises
2013-
07-18
JTC 1
Information technology
ISO/IEC/IEEE
FDIS 8802-1X
*
ISO/IEC/IEEE
FDIS 88021AE
*
ISO/IEC
144434:2008/FDAmd
3
*
ISO/IEC
1449610:2012/FDAm
d2
*
ISO/IEC
1449612:2012/FDAm
d1
*
Information technology — Telecommunications and information exchange between systems — Local and
metropolitan area networks — Part 1X: Port-based network access control
Information technology — Telecommunications and information exchange between systems — Local and
metropolitan area networks — Part 1AE: Media access control (MAC) security
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol — Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 2: MVC extensions for inclusion of depth maps
Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 1: Various enhancements including support for large metadata
201310-17
201310-17
201307-22
201307-30
201307-25
(Revision of ISO/IEC 14496-12:2008/DAmd 4)
ISO/IEC
1544412:2012/FDAm
d1
*
Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format —
Amendment 1: Various enhancements including support for large metadata
201307-25
(Revision of ISO/IEC 15444-12:2008/DAmd 4)
ISO/IEC FDIS
23008-2
*
Information technology — High efficiency coding and media delivery in heterogeneous environments
— Part 2: High efficiency video coding
ISO/IEC FDIS
24730-62
Information technology — Real time locating systems (RTLS) — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
Standards published
New International Standards published between 01 May and 31 May 2013
* Available in English only
201307-15
201307-11
** French version of standard previously published in English only
Price
group
TC 8
Ships and marine technology
ISO 130732:2013
*
ISO 8277:2013
*
Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances
E
Ships and marine technology — Pipework and machinery — Information transfer
D
ISO
17682:2013
*
F
TC 17
ISO 5951:2013
Ships and marine technology — Methodology for ship launching utilizing air bags
Steel
*
Hot-rolled steel sheet of higher yield strength with improved formability
E
TC 20
Aircraft and space vehicles
ISO 160492:2013
*
ISO
15887:2013
*
ISO
17807:2013
*
ISO
17854:2013
*
ISO
18201:2013
*
ISO
18202:2013
*
ISO
18381:2013
*
ISO
18382:2013
*
ISO
18423:2013
*
ISO
18424:2013
*
ISO
18425:2013
*
Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing calculations
G
Space data and information transfer systems — Lossless data compression
S
Space data and information transfer systems - Asynchronous message service
XB
Space data and information transfer systems — Flexible advanced coding and modulation scheme for high
rate telemetry applications
W
Space data and information transfer systems — Mission operations reference model
W
Space data and information transfer systems — Mission operations message abstraction layer
XC
Space data and information transfer systems — Lossless multispectral and hyperspectral image compression
U
Space data and information transfer systems — Spacecraft onboard interface services — RFID-based inventory management systems
T
Space data and information transfer systems — Pseudo-Noise (PN) Ranging Systems
R
Space data and information transfer systems — XML Telemetric and Command Exchange (XTCE)
X
Space data and information transfer systems — Spacecraft Onboard Interface Services — Subnetwork
Packet Service
N
ISO
18426:2013
*
ISO
18427:2013
*
ISO
18428:2013
*
ISO
18438:2013
*
ISO
18439:2013
*
ISO
18440:2013
*
ISO
18441:2013
*
ISO
18442:2013
*
ISO
18443:2013
*
ISO
18444:2013
*
ISO
18445:2013
*
ISO
18446:2013
*
ISO
22664:2013
*
ISO
22667:2013
*
ISO
22669:2013
*
ISO
22670:2013
*
ISO
26143:2013
*
ISO
16698:2013
*
Space data and information transfer systems — Spacecraft Onboard Interface Services — Subnetwork
Memory Access Service
N
Space data and information transfer systems — Spacecraft Onboard Interface Services — Subnetwork
Synchronization Service
L
Space data and information transfer systems — Spacecraft Onboard Interface Services — Subnetwork
Device Discovery Service
L
Space data and information transfer systems — Spacecraft Onboard Interface Services — Subnetwork Test
Service
L
Space data and information transfer systems — Space Communication Cross Support — Service Management — Service Specification
Space data and information transfer systems — Space Link Extension — Internet Protocol for Transfer
Services
XC
W
Space data and information transfer systems — Space Link Extension — Application Program Interface for
Transfer Services — Core Specification
XC
Space data and information transfer systems — Space Link Extension — Application Program Interface for
Return All Frames Service
V
Space data and information transfer systems — Space Link Extension — Application Program Interface for
Return Channel Frames Service
V
Space data and information transfer systems — Space Link Extension — Application Program Interface for
Return Operational Control Fields Service
W
Space data and information transfer systems — Space Link Extension — Application Program Interface for
the Forward CLTU Service
X
Space data and information transfer systems — Space Link Extension — Application Program Interface for
the Forward Space Packet Service
XC
Space data and information transfer systems — TC (telecommand) space data link protocol
XA
Space data and information transfer systems — Communications operation procedure-1
X
Space data and information transfer systems — Space link extension (SLE) — Return-all-frames service
XB
Space data and information transfer systems — Space link extension (SLE) — Return-channel-frames service
XB
Space data and information transfer systems — Space link extension (SLE) — Return operational control
fields service
XC
Space environment (natural and artificial) — Methods for estimation of future geomagnetic activity
L
TC 22
ISO 2698:2013
Road vehicles
*
Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
C
ISO
17949:2013
*
ISO 158301:2013
*
ISO 158302:2013
*
ISO 158303:2013
*
ISO 158304:2013
*
Impact test procedures for road vehicles — Seating and positioning procedures for anthropomorphic test
devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating
positions
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact
dummy — Part 1: Terminology and rationale
XB
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact
dummy — Part 2: Mechanical subsystems
R
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact
dummy — Part 3: Electronic subsystems
S
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side impact
dummy — Part 4: User's manual
XA
TC 23
Tractors and machinery for agriculture and forestry
ISO 37762:2013
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
ISO 5700:2013
D
*
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance
conditions
ISO
16236:2013
Crop protection equipment — Test method for the determination of drainable volume and its concentration
ISO 199321:2013
Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements
ISO 199322:2013
Equipment for crop protection — Knapsack sprayers — Part 2: Test methods
TC 24
Particle characterization including sieving
ISO/TR
13097:2013
C
R
C
J
L
*
Guidelines for the characterization of dispersion stability
H
TC 27
Solid mineral fuels
ISO 579:2013
Coke — Determination of total moisture
B
ISO 975:2013
Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method
B
ISO 50711:2013
Brown coals and lignites — Determination of the volatile matter in the analysis sample — Part 1: Twofurnace method
ISO 5072:2013
Brown coals and lignites — Determination of true relative density and apparent relative density
D
C
Brown coals and lignites — Determination of humic acids
ISO 5073:2013
D
TC 29
Small tools
ISO 2362:2013
Reamers — Part 2: Long fluted machine reamers with Morse taper shanks
ISO 3438:2013
Subland twist drills for holes prior to tapping screw threads
C
C
ISO 63443:2013
Coated abrasives — Grain size analysis — Part 3: Determination of grain size distribution of microgrits
P240 to P2500
TC 34
Food products
ISO
17715:2013
Flour from wheat (Triticum aestivum L.) — Amperometric method for starch damage measurement
ISO
17718:2013
Wholemeal and flour from wheat (Triticum aestivum L.) — Determination of rheological behaviour as a function of mixing and temperature increase
ISO
16297:2013
Milk — Bacterial count — Protocol for the evaluation of alternative methods
TC 38
Textiles
ISO 105B02:2013
Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp
test
TC 39
Machine tools
ISO
29262:2011
Production equipment for microsystems — Interface between end effector and handling system
TC 42
Photography
ISO
18947:2013
G
*
Imaging materials — Photographic reflection prints — Determination of abrasion resistance of photographic
images
ISO 108484:2010
Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between
adjoining rooms — Part 4: Application to junctions with at least one heavy element
TC 44
Welding and allied processes
*
TC 45
TC 58
Q
J
Acoustics
ISO
16565:2013
R
G
TC 43
ISO
24394:2008/A
md 1:2012
M
Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components — Amendment 1
F
E
XZ
Rubber and rubber products
*
Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers
Gas cylinders
G
ISO
11439:2013
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive
vehicles
TC 61
Plastics
ISO 268421:2013
*
ISO 268422:2013
*
TC 63
ISO
12818:2013
W
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part
1: Resistance to delamination in non-severe environments
D
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part
2: Resistance to delamination in severe environments
C
Glass containers
*
Glass packaging — Standard tolerances for flaconnage
E
TC 68
Financial services
ISO 200221:2013
*
ISO 200222:2013
*
ISO 200223:2013
*
ISO 200224:2013
*
ISO 200225:2013
*
ISO 200226:2013
*
ISO 200227:2013
*
ISO 200228:2013
*
ISO 10041:2013
*
ISO 10042:2013
*
Financial services — Universal financial industry message scheme — Part 1: Metamodel
XC
Financial services — Universal financial industry message scheme — Part 2: UML profile
W
Financial services — Universal financial industry message scheme — Part 3: Modelling
M
Financial services — Universal financial industry message scheme — Part 4: XML Schema generation
L
Financial services — Universal financial industry message scheme — Part 5: Reverse engineering
R
Financial services — Universal financial industry message scheme — Part 6: Message transport characteristics
D
Financial services — Universal financial industry message scheme — Part 7: Registration
C
Financial services — Universal financial industry message scheme — Part 8: ASN.1 generation
M
Information processing — Magnetic ink character recognition — Part 1: Print specifications for E13B
S
Information processing — Magnetic ink character recognition — Part 2: Print specifications for CMC7
P
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO 192011:2013
*
ISO
28841:2013
*
Testing of concrete — Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
K
Guidelines for simplified seismic assessment and rehabilitation of concrete buildings
W
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and
pharmaceutical use
ISO 38261:2013
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
TC 85
Nuclear energy, nuclear technologies, and radiological protection
M
ISO/ASTM
51275:2013
*
ISO/ASTM
51607:2013
*
ISO/ASTM
51650:2013
*
ISO/ASTM
51818:2013
*
Practice for use of a radiochromic film dosimetry system
C
Practice for use of the alanine-EPR dosimetry system
D
Practice for use of a cellulose triacetate dosimetry system
C
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300
keV
TC 94
Personal safety -- Protective clothing and equipment
ISO
20471:2013
High visibility clothing — Test methods and requirements
ISO/TS 169768:2013
Respiratory protective devices — Human factors — Part 8: Ergonomic factors
TC 104
Freight containers
ISO
17712:2013
L
K
*
Freight containers — Mechanical seals
P
TC 106
Dentistry
ISO
29022:2013
Dentistry — Adhesion — Notched-edge shear bond strength test
TC 108
Mechanical vibration, shock and condition monitoring
ISO/TR
19201:2013
G
F
*
Mechanical vibration — Methodology for selecting appropriate machinery vibration standards
N
ISO 184368:2013
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of
personnel — Part 8: Ultrasound
TC 110
Industrial trucks
ISO 2291515:2013
Industrial trucks — Verification of stability — Part 15: Counterbalanced trucks with articulated steering
TC 112
Vacuum technology
ISO 2861:2013
Vacuum technology — Dimensions of clamped-type quick-release couplings
E
C
C
TC 119
Powder metallurgy
ISO 44914:2013
Metallic powders — Determination of oxygen content by reduction methods — Part 4: Total oxygen by reduction-extraction
ISO
13517:2013
Metallic powders — Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
TC 126
Tobacco and tobacco products
ISO
16632:2013
Tobacco and tobacco products — Determination of water content — Gas-chromatographic method
TC 127
Earth-moving machinery
ISO 3164:2013
Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflectionlimiting volume
C
C
E
C
TC 131
Fluid power systems
ISO 63581:2013
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids
— Part 1: General rules and test methods for steady-state flow
V
ISO 63582:2013
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids
— Part 2: Alternative test methods
S
TC 135
Non-destructive testing
ISO 34521:2013
Non-destructive testing — Penetrant testing — Part 1: General principles
TC 136
Furniture
ISO 42112:2013
Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat
ISO 42113:2013
Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 112971:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure —
Part 1: General
TC 145
Graphical symbols
ISO
7001:2007/Am
d 1:2013
Graphical symbols — Public information symbols — Amendment 1
TC 146
Air quality
ISO/TR
17737:2012
Workplace atmospheres — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
TC 147
Water quality
ISO
11206:2011
Water quality — Determination of dissolved bromate — Method using ion chromatography (IC) and post
column reaction (PCR)
TC 159
Ergonomics
L
C
C
H
S
E
H
ISO/TR
12296:2012
Ergonomics — Manual handling of people in the healthcare sector
TC 163
Thermal performance and energy use in the built environment
ISO 125671:2010
Thermal performance of windows and doors — Determination of thermal transmittance by the hot-box
method — Part 1: Complete windows and doors
U
ISO
12569:2012
Thermal performance of buildings and materials — Determination of specific airflow rate in buildings —
Tracer gas dilution method
U
ISO
12570:2000/A
md 1:2013
Hygrothermal performance of building materials and products — Determination of moisture content by drying at elevated temperature — Amendment 1
XZ
ISO
14683:2007
Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default
values
L
TC 164
Mechanical testing of metals
ISO
9513:2012/Cor
1:2013
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum
1
TC 172
Optics and photonics
ISO 190121:2013
X
*
Microscopes — Designation of microscope objectives — Part 1: Flatness of field/Plan
D
TC 176
Quality management and quality assurance
ISO
10008:2013
Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce
transactions
TC 184
Automation systems and integration
IEC 622641:2013
*
XC
Sterilization of health care products
ISO 111372:2013
Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose
V
*
TC 201
ISO
16531:2013
N
Enterprise-control system integration — Part 1: Models and terminology
TC 198
ISO/TS
13004:2013
free
Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method
VDmaxSD
U
Surface chemical analysis
*
TC 204
Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
J
Intelligent transport systems
ISO
22839:2013
*
ISO
24531:2013
*
Intelligent transport systems — Forward vehicle collision mitigation systems — Operation, performance, and
verification requirements
Q
Intelligent transport systems — System architecture, taxonomy and terminology — Using XML in ITS standards, data registries and data dictionaries
XB
ISO/TS
25110:2013
*
Q
TC 207
ISO/TS
14067:2013
Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC)
Environmental management
*
Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and
communication
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
ISO
15197:2013
In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in
managing diabetes mellitus
TC 215
Health informatics
ISO 170901:2013
*
T
Health informatics — Public key infrastructure — Part 1: Overview of digital certificate services
R
TC 219
Floor coverings
ISO
10581:2011
Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications
TC 229
Nanotechnologies
ISO/TS
16195:2013
Nanotechnologies — Guidance for developing representative test materials consisting of nano-objects in dry
powder form
ISO/TS
17200:2013
Nanotechnology — Nanoparticles in powder form — Characteristics and measurements
TC 261
Additive manufacturing
ISO/ASTM
52915:2013
Standard specification for additive manufacturing file format (AMF) Version 1.1
ISO/ASTM
52921:2013
Standard terminology for additive manufacturing — Coordinate systems and test methodologies
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO
17502:2013
Leather — Determination of surface reflectance
CASCO
Committee on conformity assessment
ISO/IEC TS
17021-3:2013
U
D
D
D
H
H
C
*
JTC 1
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 3: Competence requirements for auditing and certification of quality management systems
C
Information technology
ISO/IEC
29182-1:2013
*
ISO/IEC
29182-2:2013
*
ISO/IEC 9594-
*
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 1:
General overview and requirements
D
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 2:
Vocabulary and terminology
E
Information technology — Open Systems Interconnection — The Directory: Selected attribute types — Part
6:2008/Cor
3:2013
ISO/IEC 95948:2008/Cor
3:2013
*
ISO/IEC 15391:2010/Cor
2:2013
*
ISO/IEC
29192-4:2013
*
ISO/IEC
109184:1999/Amd
1:2013
*
ISO/IEC
13818-1:2013
*
ISO/IEC
154441:2004/Amd
6:2013
*
ISO/IEC
230021:2006/Amd
1:2008/Cor
1:2013
*
ISO/IEC
23005-5:2013
*
ISO/IEC
230091:2012/Cor
1:2013
*
ISO/IEC
127851:2009/Cor
1:2013
*
6: — Technical Corrigendum 3
free
Information technology — Open Systems Interconnection — The Directory: Public-key and attribute certificate frameworks — Part 8: — Technical Corrigendum 3
free
Information technology — Programming languages — Fortran — Part 1: Base language — Technical Corrigendum 2
free
Information technology — Security techniques — Lightweight cryptography — Part 4: Mechanisms using
asymmetric techniques
Information technology — Digital compression and coding of continuous-tone still images: Registration of
JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types
and Registration Authorities (REGAUT) — Part 4: — Amendment 1: Application specific marker list
M
XZ
Information technology — Generic coding of moving pictures and associated audio information: Systems —
Part 1:
XC
Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment
6: Updated ICC profile support and resolution clarification
XZ
Information technology — MPEG video technologies — Part 1: Accuracy requirements for implementation of
integer-output 8x8 inverse discrete cosine transform — Amendment 1: Software for integer IDCT accuracy
testing — Technical Corrigendum 1
free
Information technology — Media context and control — Part 5: Data formats for interaction devices
XC
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation
description and segment formats — Technical Corrigendum 1
free
Information technology — Learning, education, and training — Content packaging — Part 1: Information
model — Technical Corrigendum 1
free
Standards confirmed
The following International Standards are confimred for a five year period:
TC 8
Ships and marine technology
ISO 1964:1987
(reconfirmed)
ISO 5572:1987
(reconfirmed)
ISO 6050:1987
(reconfirmed)
TC 17
Steel
ISO 2605-3:1985
(reconfirmed)
ISO 4978:1983
(reconfirmed)
ISO 6303:1981
(reconfirmed)
ISO 9327-1:1999
(reconfirmed)
ISO 9327-2:1999
(reconfirmed)
ISO 9327-3:1999
(reconfirmed)
ISO 9327-4:1999
(reconfirmed)
ISO 9327-5:1999
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 12:1987
(reconfirmed)
TC 22
Road vehicles
ISO 12097-2:1996
(reconfirmed)
ISO/TS
22240:2008
ISO 27956:2009
TC 30
Measurement of fluid flow in closed conduits
ISO 2975-2:1975
(reconfirmed)
ISO 2975-3:1976
(reconfirmed)
ISO 2975-6:1977
(reconfirmed)
ISO 2975-7:1977
(reconfirmed)
ISO 9104:1991
(reconfirmed)
TC 61
Plastics
ISO 4578:1997
(reconfirmed)
ISO 10354:1992
(reconfirmed)
ISO 10363:1992
(reconfirmed)
ISO 10365:1992
(reconfirmed)
ISO 14615:1997
(reconfirmed)
ISO 14676:1997
(reconfirmed)
ISO 14679:1997
(reconfirmed)
TC 105
Steel wire ropes
ISO 12076:2002
(reconfirmed)
TC 114
Horology
ISO 764:2002
(reconfirmed)
TC 134
Fertilizers and soil conditioners
ISO 3944:1992
(reconfirmed)
ISO 5311:1992
(reconfirmed)
ISO 5313:1986
(reconfirmed)
ISO 7409:1984
(reconfirmed)
ISO 8397:1988
(reconfirmed)
ISO 8398:1989
(reconfirmed)
ISO 10248:1996
(reconfirmed)
TC 172
Optics and photonics
ISO 11146-1:2005
ISO 11146-2:2005
ISO/TR
11552:1997
ISO 12005:2003
ISO 13695:2004
(reconfirmed)
ISO 13696:2002
(reconfirmed)
TC 178
Lifts, escalators and moving walks
ISO 4190-2:2001
(reconfirmed)
ISO 4190-3:1982
(reconfirmed)
ISO 9386-1:2000
(reconfirmed)
ISO 9386-2:2000
(reconfirmed)
ISO 9589:1994
(reconfirmed)
ISO/TR
16764:2003
TC 215
Health informatics
ISO/IEEE 1107320601:2010
Standards withdrawn
Period from 01 May to 31 May 2013
TC 29
Small tools
ISO 3439:2003
(replaced by ISO 3438:2013)
TC 68
Financial services
ISO/TS 200223:2004
(replaced by ISO 20022-3:2013)
ISO/TS 200224:2004
(replaced by ISO 20022-4:2013)
ISO/TS 200225:2004
(replaced by ISO 20022-5:2013)
ISO 1004:1995
(replaced by ISO 1004-1:2013)
Meeting calendar
(update at 01 May 2013)
Meetings called for the month of April are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
June 2013
3-5
Berlin (Germany)
TC 44/SC 3
Welding and allied processes/Welding consumables
3-6
Paris (France)
TC 46/SC 11
Information and documentation/Archives/records management
3-7
Rotterdam
(Netherlands)
TC 34/SC 5
Food products/Milk and milk products
3-7
McLean, Virginia
(USA)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
3-7
Copenhagen
(Denmark)
TC 42
Photography
3-7
Milwaukee
(USA)
TC 69
Applications of statistical methods
3-7
San Francisco
(USA)
TC 173/SC 1
Assistive products for persons with disability/Wheelchairs
3-8
Warsaw (Poland)
TC 96
Cranes
3-8
Paris (France)
TC 184/SC 4
Automation systems and integration/Industrial data
4-5
Amsterdam
(Netherlands)
TC 259
Project committee: Outsourcing
4-6
Copenhagen
(Denmark)
TC 8/SC 1
Ships and marine technology/Lifesaving and fire protection
5
Berlin (Germany)
TC 29/SC 5
Small tools/Grinding wheels and abrasives
5
Paris (France)
TC 46/SC 9
Information and documentation/Identification and description
5
Prague (Czech
Republic)
TC 115
Pumps
6
Lysaker (Nor-
TC 8/SC 2
Ships and marine technology/Marine environment protection
way)
6
Milan (Italy)
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
6
Paris (France)
TC 46/SC 4
Information and documentation/Technical interoperability
6
Paris (France)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
6-7
Milan (Italy)
TC 22/SC 17
Road vehicles/Visibility
6-7
Paris (France)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
7
Paris (France)
TC 46
Information and documentation
7
Osaka (Japan)
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and face protection
10-13
London (United
Kingdom)
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
10-14
Tel Aviv (Israel)
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
11
Geneva (Switzerland)
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
11
Chantilly (USA)
TC 220
Cryogenic vessels
11-12
Brugge (Belgium)
TC 17/SC 17
Steel/Steel wire rod and wire products
11-12
Burr Ridge
(USA)
TC 23/SC 3
Tractors and machinery for agriculture and forestry/Safety and comfort
11-13
Gothenburg
(Sweden)
TC 22
Road vehicles
11-14
Sydney (Australia)
REMCO
Committee on reference materials
12
Munich (Germany)
TC 118/SC 4
Compressors and pneumatic tools, machines and equipment/Compressed air purity specification
and compressed air treatment equipment
12-13
Burr Ridge
(USA)
TC 23/SC 4
Tractors and machinery for agriculture and forestry/Tractors
12-13
Geneva (Switzerland)
TMB
Technical Management Board
13
Atlanta (USA)
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
13
Berlin (Germany)
TC 156
Corrosion of metals and alloys
13-14
Burr Ridge
(USA)
TC 23
Tractors and machinery for agriculture and forestry
13-14
Barcelona
(Spain)
TC 91
Surface active agents
14
Groenkloof
(South Africa)
TC 37
Terminology and other language and content resources
14
Pretoria (South
Africa)
TC 37/SC 1
Terminology and other language and content resources/Principles and methods
14
Pretoria (South
Africa)
TC 37/SC 2
Terminology and other language and content resources/Terminographical and lexicographical
working methods
14
Pretoria (South
Africa)
TC 37/SC 3
Terminology and other language and content resources/Systems to manage terminology,
knowledge and content
14
Pretoria (South
TC 37/SC 4
Terminology and other language and content resources/Language resource management
Africa)
14
Pretoria (South
Africa)
TC 37/SC 5
Terminology and other language and content resources/Translation, interpreting and related technology
14
Paris (France)
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
14-15
Atlanta (USA)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
17-19
Delft (Netherlands)
TC 252
Project committee: Natural gas fuelling stations for vehicles
17-21
Seoul (Korea,
Republic of)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
17-21
Bellevue (USA)
JTC 1/SC 34
Information technology/Document description and processing languages
17-21
Shanghai (China)
TC 121
Anaesthetic and respiratory equipment
17-21
Berlin (Germany)
TC 149
Cycles
18-19
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
18-19
Louvain-laNeuve (Belgium)
TC 17/SC 11
Steel/Steel castings
18-19
Courbevoie,
Paris (France)
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
18-19
Elda (Alicante)
(Spain)
TC 137
Footwear sizing designations and marking systems
19
Porto de Galinhas (Brazil)
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
19-20
Prague (Czech
Republic)
TC 17/SC 12
Steel/Continuous mill flat rolled products
19-20
London (United
Kingdom)
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
19-25
Vienna (Austria)
JTC 1/SC 28
Information technology/Office equipment
21
AnnweilerBindersbach
(Germany)
TC 43/SC 2
Acoustics/Building acoustics
23-25
Calgary (Canada)
TC 253
Project committee: Treated wastewater re-use for irrigation
24-26
Berlin (Germany)
TC 34/SC 9
Food products/Microbiology
24-27
London (United
Kingdom)
PC 278
Anti-bribery management system - Requirements
24-27
Istanbul (Turkey)
TC 189
Ceramic tile
24-28
Montreal (Canada)
TC 35
Paints and varnishes
24-28
Gaborone (Botswana)
TC 207
Environmental management
25-26
Tokyo (Japan)
TC 17/SC 9
Steel/Tinplate and blackplate
25-28
Delft (Netherlands)
TC 193
Natural gas
26
Montreal (Canada)
TC 35/SC 14
Paints and varnishes/Protective paint systems for steel structures
26-27
Paris (France)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
27
Montreal (Canada)
TC 35/SC 9
Paints and varnishes/General test methods for paints and varnishes
27-28
Tokyo (Japan)
TC 67/SC 6
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Processing equipment and systems
28
Stockholm
(Sweden)
TC 51
Pallets for unit load method of materials handling
28
Espoo (Helsinki)
(Finland)
TC 188
Small craft
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
Washington, D.C
(USA)
**
July 2013
1-5
Bornholm (Denmark)
TC 268
Sustainable development in communities
2
Berlin (Germany)
TC 274
Light and lighting
2-4
Bornholm (Denmark)
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
12
Nottingham
(United Kingdom)
TC 261
Additive manufacturing
15-17
Vienna (Austria)
PC 273
Customer contact centres
August 2013
5-8
Washington, D.C
(USA)
TC 134
Fertilizers and soil conditioners
18
Pretoria (South
Africa)
TC 27/SC 1
Solid mineral fuels/Coal preparation: Terminology and performance
18-23
Centurion (South
Africa)
TC 27
Solid mineral fuels
18-23
Centurion (South
Africa)
TC 27/SC 3
Solid mineral fuels/Coke
18-23
Centurion (South
Africa)
TC 27/SC 4
Solid mineral fuels/Sampling
19-23
Pretoria (South
Africa)
TC 27/SC 5
Solid mineral fuels/Methods of analysis
26-30
(Canada)
JTC 1/SC 35
Information technology/User interfaces
**
September 2013
1-4
Moscow (Russian Federation)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
3-6
Hangzhou (China)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
4
Geneva (Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
7-13
Moscow (Russian Federation)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
8-13
Suzhou (China)
TC 61
Plastics
9
Victoria (Canada)
TC 33
Refractories
*
9-10
London (United
Kingdom)
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
9-10
Paris (France)
TC 26
Copper and copper alloys
9-11
Gaithersburg
(USA)
TC 172/SC 9
Optics and photonics/Electro-optical systems
9-13
Delft (Netherlands)
JTC 1/SC 34
Information technology/Document description and processing languages
9-13
Montreal (Canada)
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
and shock
9-13
Tallberg (Sweden)
TC 258
Project, programme and portfolio management
10
London (United
Kingdom)
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems
using foam and powder
10
Paris (France)
TC 79/SC 11
Light metals and their alloys/Titanium
10-13
Stockholm
(Sweden)
TC 205
Building environment design
11
London (United
Kingdom)
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
11
London (United
Kingdom)
TC 21/SC 11
Equipment for fire protection and fire fighting/Smoke and heat control systems and components
11
Suzhou (China)
TC 61/SC 1
Plastics/Terminology
11
Suzhou (China)
TC 61/SC 2
Plastics/Mechanical properties
11
Suzhou (China)
TC 61/SC 5
Plastics/Physical-chemical properties
11
Suzhou (China)
*
TC 61/SC 10
Plastics/Cellular plastics
11
Suzhou (China)
*
TC 61/SC 11
Plastics/Products
11
Suzhou (China)
*
TC 61/SC 12
Plastics/Thermosetting materials
11
Paris (France)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
11
Stockholm
(Sweden)
TC 163/SC 2
Thermal performance and energy use in the built environment/Calculation methods
11
Stockholm
(Sweden)
TC 163/SC 3
Thermal performance and energy use in the built environment/Thermal insulation products
11-12
Stockholm
(Sweden)
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding hardmetals)
12
London (United
Kingdom)
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
12
Suzhou (China)
TC 61/SC 4
Plastics/Burning behaviour
12
Suzhou (China)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
12
Suzhou (China)
*
TC 61/SC 9
Plastics/Thermoplastic materials
12
Suzhou (China)
*
TC 61/SC 13
Plastics/Composites and reinforcement fibres
12
Paris (France)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
12
Paris (France)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
12
Stockholm
(Sweden)
TC 119/SC 2
Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)
*
*
*
*
12
Stockholm
(Sweden)
TC 119/SC 4
Powder metallurgy/Sampling and testing methods for hardmetals
12
Vienna (Austria)
TC 146/SC 3
Air quality/Ambient atmospheres
12
Stockholm
(Sweden)
TC 163/SC 1
Thermal performance and energy use in the built environment/Test and measurement methods
12-13
Stockholm
(Sweden)
TC 163
Thermal performance and energy use in the built environment
13
London (United
Kingdom)
TC 21
Equipment for fire protection and fire fighting
13
Paris (France)
TC 79
Light metals and their alloys
13
Stockholm
(Sweden)
TC 119
Powder metallurgy
13
Stockholm
(Sweden)
*
TC 119/SC 5
Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals)
13
Vienna (Austria)
*
TC 146/SC 5
Air quality/Meteorology
13
Vienna (Austria)
TC 146/SC 6
Air quality/Indoor air
13
(Germany)
**
TC 244
Industrial furnaces and associated processing equipment
15-19
Paris (France)
*
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
15-20
Velsen (Netherlands)
TC 164
Mechanical testing of metals
16
Sydney (Australia)
*
PC 271
Compliance programs
16-17
St. Petersburg
(Russian Federation)
*
DEVCO
Committee on developing countries matters
16-17
St. Petersburg
(Russian Federation)
*
TMB
Technical Management Board
16-20
Copenhagen
(Denmark)
*
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
16-20
London (United
Kingdom)
TC 150
Implants for surgery
17
Fukuoka (Japan)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
17
Paris (France)
TC 254
Safety of amusement rides and amusement devices
17-18
Jiangyin (China)
TC 105
Steel wire ropes
17-18
Belo Horizonte
(Brazil)
TC 155
Nickel and nickel alloys
17-19
Tokyo (Japan)
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
17-19
Chengdu (China)
TC 256
Pigments, dyestuffs and extenders
18
St. Petersburg
(Russian Federation)
**
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
18-20
St. Petersburg
(Russian Federation)
*
GA
General Assembly
*
*
*
19
Atlanta (USA)
TC 142
Cleaning equipment for air and other gases
19
Fukuoka (Japan)
TC 190/SC 4
Soil quality/Biological methods
19-20
Graz (Austria)
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
20
Fukuoka (Japan)
TC 190
Soil quality
20
Fukuoka (Japan)
*
TC 190/SC 2
Soil quality/Sampling
20
Fukuoka (Japan)
*
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
20
Fukuoka (Japan)
*
TC 190/SC 7
Soil quality/Soil and site assessment
21
St. Petersburg
(Russian Federation)
*
COUNCIL
Council
23-24
Paris (France)
*
PC 277
Sustainable purchasing
23-27
Kobe (Japan)
*
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
23-27
Milan (Italy)
*
TC 120
Leather
23-27
Milan (Italy)
*
TC 120/SC 1
Leather/Raw hides and skins, including pickled pelts
23-27
Milan (Italy)
*
TC 120/SC 2
Leather/Tanned leather
23-27
Milan (Italy)
*
TC 120/SC 3
Leather/Leather products
23-27
Vienna (Austria)
*
TC 218
Timber
23-27
Chicago (USA)
TC 262
Risk management
24-25
Beijing (China)
TC 265
Carbon dioxide capture, transportation, and geological storage
24-26
Gaithersburg
(USA)
TC 172/SC 1
Optics and photonics/Fundamental standards
25-26
Oslo (Norway)
*
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
25-27
Tokyo (Japan)
*
TC 267
Facilities management
26-27
Rotterdam
(Netherlands)
TC 260
Human resource management
26-27
Toulouse
(France)
*
TC 264
Fireworks
27
Seoul (Korea,
Republic of)
**
TC 44/SC 12
Welding and allied processes/Soldering materials
27
Bromont (Québec) (Canada)
TC 153/SC 1
Valves/Design, manufacture, marking and testing
27
Helsinki (Finland)
TC 213
Dimensional and geometrical product specifications and verification
29
Jeju (Korea,
Republic of)
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
*
*
London (United
Kingdom)
**
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
(Germany)
**
TC 180
Solar energy
September-October 2013
30-4
(Sweden)
**
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
30-1
Tampere (Finland)
**
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
30-2
Berlin (Germany)
TC 34/SC 15
Food products/Coffee
October 2013
2-3
Tampere (Finland)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
2-3
St. John, Newfoundland (Canada)
TC 67/SC 8
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Arctic operations
3-4
Chantilly (USA)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
5
Incheon (Korea,
Republic of)
*
TC 106
Dentistry
7
Istanbul (Turkey)
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-8
Milan (Italy)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
7-8
Sparks, Nevada
(USA)
TC 209
Cleanrooms and associated controlled environments
7-9
Tokyo (Japan)
*
TC 70
Internal combustion engines
7-9
Tokyo (Japan)
*
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
7-9
Istanbul (Turkey)
**
TC 126
Tobacco and tobacco products
7-11
Beijing (China)
*
CASCO
Committee on conformity assessment
7-11
Oslo (Norway)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
7-11
Colorado
Springs (USA)
TC 247
Fraud countermeasures and controls
8
Istanbul (Turkey)
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
8-10
Berlin (Germany)
TC 59/SC 8
Buildings and civil engineering works/Sealants
9
London (United
Kingdom)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
9
Istanbul (Turkey)
TC 38/SC 23
Textiles/Fibres and yarns
9-10
Seogwipo-si
(Korea, Republic
of)
TC 159
Ergonomics
10
Istanbul (Turkey)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Istanbul (Turkey)
TC 38
Textiles
11
Garching (Germany)
**
TC 60
Gears
11
Garching (Germany)
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching (Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
11
Venice (Italy)
*
TC 146/SC 2
Air quality/Workplace atmospheres
14-15
Miami (USA)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
14-17
Stuttgart (Germany)
TC 165
Timber structures
14-18
Paris (France)
PC 271
Compliance programs
14-18
Paris (France)
TC 2
Fasteners
**
*
**
*
14-18
Seoul (Korea,
Republic of)
15
Halifax (Canada)
15
La Plaine StDenis (France)
16
*
TC 108
Mechanical vibration, shock and condition monitoring
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
**
TC 44/SC 5
Welding and allied processes/Testing and inspection of welds
La Plaine StDenis (France)
**
TC 44/SC 9
Welding and allied processes/Health and safety
16-18
Munich (Germany)
*
TC 58/SC 3
Gas cylinders/Cylinder design
16-18
(Korea, Republic
of)
**
TC 123
Plain bearings
16-18
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
16-18
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
16-18
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
16-18
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
16-18
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
17-18
La Plaine StDenis (France)
**
TC 44
Welding and allied processes
18
Berlin (Germany)
*
TC 22/SC 7
Road vehicles/Injection equipment and filters for use on road vehicles
19-20
Jacksonville
(USA)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
21-25
Singapore (Singapore)
TC 8
Ships and marine technology
21-25
(Europe)
*
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
21-25
Sao Paulo (Brazil)
*
TC 181
Safety of toys
21-25
Sydney (Australia)
TC 215
Health informatics
21-26
Berlin (Germany)
*
TC 147
Water quality
22-25
Tokyo (Japan)
*
TC 146/SC 1
Air quality/Stationary source emissions
23
Paris (France)
*
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
23
Berlin (Germany)
*
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
23
Tokyo (Japan)
**
TC 206
Fine ceramics
24-25
Sarajevo (Bosnia
and Herzegovina)
**
TC 34/SC 12
Food products/Sensory analysis
24-25
Berlin (Germany)
TC 173
Assistive products for persons with disability
28-29
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
28-31
Bali (Indonesia)
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
30
Prague (Czech
TC 266
Biomimetics
*
Republic)
31
Bali (Indonesia)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
31
Bali (Indonesia)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
(France)
**
TC 111
Round steel link chains, chain slings, components and accessories
(France)
**
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
Berlin (Germany)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Beijing (China)
**
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
Boulder (USA)
**
TC 202
Microbeam analysis
Berlin (Germany)
**
TC 263
Coalbed methane (CBM)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
TC 45
Rubber and rubber products
*
TC 130
Graphic technology
October-December 2013
7-11
Oslo (Norway)
*
October-November 2013
28-1
Bali (Indonesia)
28-3
Berlin (Germany)
November 2013
1
Bali (Indonesia)
*
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
2-9
Porto (Portugal)
*
TC 176
Quality management and quality assurance
4-8
Sydney (Australia)
*
TC 34/SC 17
Food products/Management systems for food safety
4-9
Perros-Guirec
(France)
**
JTC 1
Information technology
6-8
Paris (France)
**
TC 275
Sludge recovery, recycling, treatment and disposal
6-9
Washington, D.C
(USA)
*
TC 227
Springs
7
Okinawa (Japan)
*
TC 201
Surface chemical analysis
7
Okinawa (Japan)
*
TC 201/SC 1
Surface chemical analysis/Terminology
7
Okinawa (Japan)
*
TC 201/SC 2
Surface chemical analysis/General procedures
7
Okinawa (Japan)
*
TC 201/SC 9
Surface chemical analysis/Scanning probe microscopy
8
Delft (Netherlands)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
8
Shenzen (China)
TC 160
Glass in building
8
Shenzen (China)
*
TC 160/SC 1
Glass in building/Product considerations
8
Shenzen (China)
*
TC 160/SC 2
Glass in building/Use considerations
8
Okinawa (Japan)
*
TC 201/SC 3
Surface chemical analysis/Data management and treatment
8
Okinawa (Japan)
*
TC 201/SC 4
Surface chemical analysis/Depth profiling
8
Okinawa (Japan)
*
TC 201/SC 7
Surface chemical analysis/Electron spectroscopies
9
Okinawa (Japan)
*
TC 201/SC 8
Surface chemical analysis/Glow discharge spectroscopy
10-15
Mexico (Mexico)
*
TC 113
Hydrometry
11-15
Mexico (Mexico)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
11-15
Tokyo (Japan)
*
TC 98
Bases for design of structures
13
Tokyo (Japan)
**
TC 110/SC 1
Industrial trucks/General terminology
14
Tokyo (Japan)
**
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
14-15
Redlands (USA)
*
TC 211
Geographic information/Geomatics
15
Tokyo (Japan)
**
TC 110
Industrial trucks
18-20
Berlin (Germany)
*
TC 20
Aircraft and space vehicles
19-21
Singapore (Singapore)
*
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
20-22
Tokyo (Japan)
*
TC 269
Railway applications
27
Milan (Italy)
**
TC 221
Geosynthetics
30
Berlin (Germany)
**
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
Berlin (Germany)
**
TC 41
Pulleys and belts (including veebelts)
*
TC 276
Biotechnology
New Delhi (India)
**
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
London (United
Kingdom)
**
TC 59/SC 2
Buildings and civil engineering works/Terminology and harmonization of languages
**
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
**
TC 17/SC 3
Steel/Steels for structural purposes
Paris (France)
**
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
(South America)
**
JTC 1/SC 35
Information technology/User interfaces
(Sweden)
**
TC 213
Dimensional and geometrical product specifications and verification
TC 118
Compressors and pneumatic tools, machines and equipment
December 2013
12-13
Berlin (Germany)
4th Quarter 2013
Month unknown 2013
Bratislava (Slovakia)
January 2014
Paris (France)
February 2014
10-14
March 2014
11-14
London (United
Kingdom)
11-14
London (United
Kingdom)
*
TC 118/SC 3
Compressors and pneumatic tools, machines and equipment/Pneumatic tools and machines
11-14
London (United
Kingdom)
*
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
systems
13
London (United
Kingdom)
*
TC 118/SC 1
Compressors and pneumatic tools, machines and equipment/Process compressors
13
London (United
Kingdom)
*
TC 118/SC 4
Compressors and pneumatic tools, machines and equipment/Compressed air purity specification
and compressed air treatment equipment
23-27
Warsaw (Poland) *
TC 107
Metallic and other inorganic coatings
23-27
Warsaw (Poland)
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
*
23-27
Warsaw (Poland)
*
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
23-27
Warsaw (Poland)
*
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
23-27
Warsaw (Poland)
*
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
27-28
Geneva (Switzerland)
*
COUNCIL
Council
**
PC 271
Compliance programs
March-April 2014
31-4
Vienna (Austria)
April 2014
7-11
Delft (Netherlands)
*
TC 6
Paper, board and pulps
7-11
Delft (Netherlands)
*
TC 6/SC 2
Paper, board and pulps/Test methods and quality specifications for paper and board
7-11
Vitoria (Brazil)
*
TC 102
Iron ore and direct reduced iron
7-11
Vitoria (Brazil)
*
TC 102/SC 1
Iron ore and direct reduced iron/Sampling
7-11
Vitoria (Brazil)
*
TC 102/SC 2
Iron ore and direct reduced iron/Chemical analysis
7-11
Vitoria (Brazil)
*
TC 102/SC 3
Iron ore and direct reduced iron/Physical testing
7-11
Bologna (Italy)
*
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
7-11
Amsterdam
(Netherlands)
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
8-9
(Japan)
**
TC 199
Safety of machinery
8-10
(Brazil)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
14-15
Hong Kong
(Hong Kong,
China)
*
JTC 1/SC 27
Information technology/IT Security techniques
23-24
(Europe)
**
TC 167
Steel and aluminium structures
Berlin (Germany)
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
Berlin (Germany)
**
TC 34/SC 11
Food products/Animal and vegetable fats and oils
May 2014
9-16
London (United
Kingdom)
*
TC 10
Technical product documentation
9-16
London (United
Kingdom)
*
TC 10/SC 1
Technical product documentation/Basic conventions
9-16
London (United
Kingdom)
*
TC 10/SC 6
Technical product documentation/Mechanical engineering documentation
12-16
London (United
Kingdom)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
14-16
Rosslyn (USA)
**
TC 145
Graphical symbols
14-16
Rosslyn (USA)
**
TC 145/SC 1
Graphical symbols/Public information symbols
14-16
Rosslyn (USA)
**
TC 145/SC 2
Graphical symbols/Safety identification, signs, shapes, symbols and colours
14-16
Rosslyn (USA)
**
TC 145/SC 3
Graphical symbols/Graphical symbols for use on equipment
15
London (United
Kingdom)
*
TC 68
Financial services
19-23
Berlin (Germany)
**
TC 43
Acoustics
19-23
Berlin (Germany)
**
TC 43/SC 1
Acoustics/Noise
19-24
Karuizawa (Japan)
**
TC 215
Health informatics
Beijing (China)
**
TC 24/SC 4
Particle characterization including sieving/Particle characterization
Washington, D.C
(USA)
**
TC 46/SC 11
Information and documentation/Archives/records management
June 2014
1-6
(Sweden)
**
TC 127
Earth-moving machinery
5-6
Berlin (Germany)
*
TC 211
Geographic information/Geomatics
16-20
Incheon (Korea,
Republic of)
*
TC 121
Anaesthetic and respiratory equipment
September 2014
8-9
Madrid (Spain)
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
10-12
Rio de Janeiro
(Brazil)
*
GA
General Assembly
13
Rio de Janeiro
(Brazil)
*
COUNCIL
Council
(USA)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
Milan (Italy)
**
TC 39/SC 4
Machine tools/Woodworking machines
Montreal (Canada)
**
TC 213
Dimensional and geometrical product specifications and verification
**
TC 48
Laboratory equipment
3rd Quarter 2014
London (United
Kingdom)
October 2014
5-10
Berlin (Germany)
**
TC 215
Health informatics
23-24
(South Africa)
**
TC 178
Lifts, escalators and moving walks
Prague (Czech
Republic)
**
TC 135
Non-destructive testing
**
TC 45
Rubber and rubber products
(Portugal)
**
TC 34/SC 4
Food products/Cereals and pulses
(South Africa)
**
TC 146
Air quality
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
**
REMCO
Committee on reference materials
November 2014
3-7
Cape Town
(South Africa)
4th Quarter 2014
2nd Semester 2014
Madrid (Spain)
Month unknown 2014
(USA)
(Australia)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
(Japan)
**
TC 44
Welding and allied processes
(United Kingdom)
**
TC 142
Cleaning equipment for air and other gases
Suzhou (China)
**
TC 164
Mechanical testing of metals
(Germany)
**
TC 190
Soil quality
**
TC 213
Dimensional and geometrical product specifications and verification
Foshan (China)
**
TC 107
Metallic and other inorganic coatings
Foshan (China)
**
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
Foshan (China)
**
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China)
**
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
Foshan (China)
**
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
Tienjin (China)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(Europe)
**
TC 215
Health informatics
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
**
TC 215
Health informatics
*
TC 154
Processes, data elements and documents in commerce, industry and administration
**
JTC 1
Information technology
(South Africa)
**
REMCO
Committee on reference materials
(Finland)
**
TC 44
Welding and allied processes
(France)
**
TC 45
Rubber and rubber products
(Japan)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
February 2015
London (United
Kingdom)
1st Quarter 2015
April 2015
2nd Quarter 2015
(China)
3rd Quarter 2015
Sao Paulo (Brazil)
October 2015
21-25
Berlin (Germany)
November 2015
(China)
Month unknown 2015
(United Kingdom)
**
TC 164
Mechanical testing of metals
(Austria)
**
TC 190
Soil quality
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(Australia)
**
TC 178
Lifts, escalators and moving walks
**
JTC 1
Information technology
(Russian Federation)
**
REMCO
Committee on reference materials
Beijing (China)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Australia)
**
TC 44
Welding and allied processes
April 2016
November 2016
(Norway)
Month unknown 2016