Sustainability – Mitsubishi Converting Furnace At Birla Copper, Sanjay Sarkar, Anil Singh, H
K Singh, Nirmal Ghosh, Vishal Kinikar, Birla Copper, Hindlaco Industries Limited
Technology plays vital role for operational excellence, Sanjay Sarkar, S.P. Chauhan,
Sandeep Rehani, Mahesh Mujumdar, Hindalco Industries Ltd., Unit: Birla Copper, Dahej,
Dist. Bharuch, Gujarat
Introduction of a new fully hydrometallurgical process for the recovery of precious metals
from copper electrorefining anode slimes, S. Kurki, K. Lillkung, H. Virtanen, Outotec
Outotec’s solutions for automatic bath removal in the rodding shop, bath cooling and
bath processing up to preparation of anode cover material, Manfred Beilstein and Tony
Hudson
Cathode Lining Modification For Energy Reduction in Hirakud’s 85kA Smelter, Amit Gupta,
Amit Jha, Mahesh Sahoo, J. Jinil and J. P. Nayak, Aditya Birla Science and Technology
Company Ltd, Taloja, India; Hindalco Industries Ltd, Hirakud, Sambalpur, India
Flotation of wolframite with phosphoric acid ester collector: Adsorption, Electrokinetic
and Infrared Studies, K.Srinivas, T.Sreenivas, R.Venugopal and R.R.Venkatkrishnan, Maaden
Phosphate Company, Arar City; Mineral Processing Division, Bhabha Atomic Research
Centre, Hyderabad; Department of Fuel and Mineral Engg., Indian School of Mines,
Dhanbad
Distribution Of Selenium During Separation Of Slag And Matte, Bhavin Desai, Vilas
Tathavadkar, Somnath Basu, Aditya Birla Science and Technology Company Limited, Taloja,
India; Indian Institute of Technology, Powai, Mumbai, India
Direct electrolytic refining of waste copper wire scraps and fabrication rejects for
production of copper powder, N. S. Randhawa, Manoj Kumar, L.K. Sahoo, Gulzar Hussain,
D. C. Sau, MEF Division, CSIR-National Metallurgical Laboratory, Jamshedpur, India; National
Institute of Technology, Srinagar, India
Synthesis and adsorption properties of porous activated alumina, Geetanjali Mishra,
Barsha Dash, I.N.Bhattacharya, CSIR-Institute of Minerals and Materials Technology,
Bhubaneswar, India
Hydrometallurgical recovery of scandium from Indian red mud, Shivendra Sinha, Arshdeep
Singh, Jyotsna Kumari, Pratima Meshram, Abhilash, Banshi Dhar Pandey, P.K.Behera,
B.K.Satpathy, CSIR- National Metallurgical Laboratory, Jamshedpur, INDIA; National Institute
of Technology, Jalandhar, INDIA; National Aluminium Company, Bhubaneswar, INDIA
Effect of Tween 80 on electrochemical deposition of cobalt from sulphate solutions, Pinak
Patnaik, S.R. Bhatta, B.C. Tripathy, M.K.Ghosh, I.N. Bhattacharya, R.K.Paramguru, Hydro and
Electrometallurgy Department, CSIR-Institute of Minerals and Materials Technology (IMMT),
Bhubaneswar,Odisha; Academy of Scientific and Innovative Research (AcSIR), CSIR Campus,
Taramani, Chennai; School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha
Extraction of alumina and silica from NALCO fly ash using sulphuric acid in the presence of
sodium fluoride, A. K. Tripathy, C. K. Sarangi, B.C.Tripathy, K. Sanjay, I.N. Bhattacharya, B.K.
Mohapatra, P. K. Behera, B.K. Satpathy, Hydro & Electrometallurgy Department, CSIRInstitute of Minerals and Materials Technology (IMMT), Bhubaneswar, Odisha; NALCO,
Bhubaneswar, Orissa
Aluminum industry innovation: ultrasonic grain refining, Kiran Manchiraju, Qingyou Han
and Michael Powell, Southwire Company, LLC; One Southwire Drive; Carrollton, GA 30119;
Purdue University; 610 Purdue Mall; West Lafayette, IN 47907
Waste residual dross processing in India-Opportunities and Challenges, Upendra Singh, S.
Ansari, S.P. Puttewar & A. Agnihotri, Jawaharlal Nehru Aluminium Research Development
and Design Centre, Nagpur, India
Thermal resistant aluminium conductors, R N Chouhan, P Mahendiran, P R Dungore,
VNSUV Ammu, G Shukla, A Agnihotri, Jawaharlal Nehru Aluminium Research Development
and Design Centre, Nagpur, India
Extraction of vanadium pentaoxide from vanadium sludge, Pratima Meshram, Jyotsna
Kumari, Abhilash, Banshi Dhar Pandey, CSIR-National Metallurgical Laboratory, Jamshedpur,
INDIA
Solvent extraction of Y(III) from chloride solution with a bifunctional ionic liquid
extractant, Suprava Das, Sushree Sonali Swain, Sanjibita Das, Niharbala Devi and Nandita
Swain, Department of Chemistry, College of Basic Science and Humanities, Orissa University
of Agriculture and Technology, Bhubaneswar, India; Department of Chemistry, Institute of
Technical Education and Research, Siksha’O’Anusandhan University, Khandagiri Square,
Bhubaneswar, India
Study of Ce (III) extraction from dilute nitric acid media using PC88A, Sushanta Kumar
Sahu, Sujata Mishra and Swagatika Satpathy, Department of Chemistry, Institute of
Technical Education and Research, Siksha ‘O’ Anusandhan University, Khandagiri Square,
Bhubaneswar,India
Recovery of rare earth elements from fly ash, Shivendra Sinha, Jyotsna Kumari, Pratima
Meshram, Abhilash, Banshi Dhar Pandey, CSIR- National Metallurgical Laboratory,
Jamshedpur, INDIA
Electrodeposition of manganese in the presence of sodium lauryl sulphate, Subrat Kumar
Padhy, Sushil Ranjan Bhatta, Bankim Chandra Tripathy, M.K. Ghosh, I.N. Bhattacharya,
Hydro & Electrometallurgy Department, CSIR - Institute of Minerals and Materials
Technology, Bhubaneswar, Odisha; Academy of Scientific and Innovative Research (AcSIR),
CSIR Campus, Taramani, Chennai
Study of dissolution kinetics of dolime in Electrothermal magnesium slag, Krishna Kumar,
Manoj Kumar, Kalpatru Gharami, N. S. Randhawa, D. C. Sau, Academy of Scientific and
Innovative Research, CSIR- National Metallurgical Laboratory, Jamshedpur; Metal Extraction
& Forming division, CSIR-National Metallurgical Laboratory, Jamshedpur
An Advanced Geopolymer from High Carbon Ferrochrome Slag (HCFCS), MV
BasantaKumar, Sanjeev Kumar Gupta, Pradeep KumarRana, Radha Raman Dash, Civil
engineering department, Gandhi Institute of engineering and technology (GIET), Gunupur,
Odisha, India ; BasicScience and Humanities department, Gandhi Institute of engineering
and technology (GIET), Gunupur, Odisha, India ; Metallurgy department, Gandhi Institute of
engineering and technology (GIET), Gunupur, Odisha, India
Theory & Application of Weibull Distribution for Prediction of Aluminium Reduction Cell
Life, A. Palchowdhury, R&D Dept, Smelter Plant, Nalco
Optimization of vacuum Filtration of calcite rich ORE slurry using statistical experimental
scheme and analysis, Md.Serajuddin and T.Sreenivas, Mineral Processing Division, Bhabha
Atomic Research Centre, Begumpet, Hyderabad, 500 016, India
Bio-process using hot spring silicate bacterium to upgrade alumina in NALCO fly ash,
Sangeeta Raut, Sudip Kumar Sen, Madan Mohan Das, R.R.Dash, P.K.Behera and B.K.
Satpathy, Dept. of Biotechnology, Gandhi Institute of Engineering Technology, Gunupur,
Rayagada, Odisha; NALCO, Bhubaneswar
Titanium Alloys For Aerospace Applications, B Saha, D B Anant Sagar, M S K Rao, Dr. N.
Eswara Prasad, RCMA(Materials), CEMILAC, DRDO, Min. of Defence, Kanchanbagh,
Hyderabad
Extraction of non-ferrous fractions from industrial waste by biohydrometallurgy, Biraja
Prasad Tripathy, Indira Gandhi Institute Of Technology, Sarang
Effects of multi roller burnishing on non-ferrous metals -A study on surface roughness
and hardness. Amrit Mohanty, Chinmaya Nanda, Guruprasad Mishra, Indira Gandhi
Institute Of Technology, Sarang
Modern Approach To Sustainable Aluminium Extraction, Ankeet Ranjan Pati, Shahid Baig,
Indira Gandhi Institute Of Technology, Sarang (Email: aspiron.ankeet2@gmail.com)
Production of Geopolymer based Construction Material from Pond Ash: An Industrial
Waste, Muktikanta Panigrahi, Pradeep Kumar Rana, Ajaya Kumar Pradhan, Prashant
Kumar Rout, Asish Kumar Samal, Sanjeev Gupta and Mv Basanta Kumar; Department of
Metallurgical Engineering and Department of Civil Engineering, Gandhi Institute of
Engineering and Technology, Gunupur
Chromium Recycling, Biswajit Mishra, Indira Gandhi Institute Of Technology, Sarang
Environmental friendly procedure developed for extracting silver, Smruti Dash, Snigdha
Gochhayat, Metallurgical Engg department, Indira Gandhi Institute Of Technology, Sarang