A. B. Harper, T. R. & Last, N. C. 1990. Response of fractured rock subject to fluid injection, Part II. Characteristic behavior.Tectonophysics 172, 33-51. C. Harper, T. R. & Last, N. C. 1990. Response of fractured rock subject to fluid injection, Part III. Practical application. Tectonophysics 172, 52-65. D. Lorenz, J. C., Teufel, L. W. & Warpinski, N. R. 1991. Regional fractures I: A mechanism for the formation of regional fractures at depth in flat-lying reservoirs. American Association of Petroleum Geologists Bulletin 75, 1714-1737. E. Martel, S. J. & Pollard, D. D. 1989. Mechanics of slip and fracture along small faults and simple strike-slip fault zones in granitic rock. Journal of Geophysical Research 94, 9417-9428. F. Martel, S. J., Pollard, D. D. & Segall, P. 1988. Development of simple strike-slip fault zones, Mount Abbot quadrangle, Sierra Nevada, California. Geological Society of America Bulletin 100, 1451-1465. G. Pollard, D. D. & Aydin, A. 1988. Progress in understanding jointing over the past century. Geological Society of America Bulletin 100, 1181-1204 H. Secor, D. T. 1965. Role of fluid pressure in jointing. American Journal of Science 263, 633-646. I. Segall, P. & Pollard, D. D. 1980. Mechanics of discontinuous faults. Journal of Geophysical Research 85, 4337-4350. J. Segall, P. & Pollard, D. D. 1983. Joint formation in granitic rock of the Sierra Nevada. Geological Society of America Bulletin 94, 563-575. K. Segall, P. & Pollard, D. D. 1983. Nucleation and growth of strike-slip faults in granite. Journal of Geophysical Research 88, 555-568. L. Segall, P. 1984. Formation and growth of extensional fracture sets. Geological Society of America Bulletin 95, 454-462 . M. Olson, J. E. 1993. Joint pattern development: Effects of subcritical crack growth and mechanical crack interaction. Journal of Geophysical Research 98, 12251-12265. Reading List Fractures and Flow 1. GEOLOGIC OVERVIEW FRACTURING CONCEPTS Atkinson, B. K. 1984. Subcritical crack growth in geological materials. Journal of Geophysical Research 89, 4077-4114. Chouet, B. & Julian, B. R. 1985. Dynamics of an expanding fluid-filled crack. Journal of Geophysical Research 90, 11187-11191. Chouet, B. 1986. Dynamics of a fluid-driven crack in three dimensions by the finite difference method. Journal of Geophysical Research 91, 13967-13992. Engelder, T. & Lacazette, A., Ed. 1990. Natural hydraulic fracturing. Rock Joints. Rotterdam, A. A. Balkema. Engelder, T. & Oertel, G. 1985. Correlation between abnormal pore pressure and tectonic jointing in the Devonian Catskill Delta. Geology 13, 863-866. Harper, T. R. & Last, N. C. 1990. Response of fractured rock subject to fluid injection, Part II. Characteristic behavior.Tectonophysics 172, 33-51. Harper, T. R. & Last, N. C. 1990. Response of fractured rock subject to fluid injection, Part III. Practical application. Tectonophysics 172, 52-65. Huang, N. C. & Russel, S. G. 1985. Hydraulic fracturing of a saturated porous medium-I: General theory. Theoretical and Applied Fracture Mechanics 4, 201-213. Keer, L. M. & Chen, S. H. 1981. The intersection of a pressurized crack with a joint. Journal of Geophysical Research 86, 1032-1038. Lorenz, J. C., Teufel, L. W. & Warpinski, N. R. 1991. Regional fractures I: A mechanism for the formation of regional fractures at depth in flat-lying reservoirs. American Association of Petroleum Geologists Bulletin 75, 17141737. Martel, S. J. & Pollard, D. D. 1989. Mechanics of slip and fracture along small faults and simple strike-slip fault zones in granitic rock. Journal of Geophysical Research 94, 9417-9428. Martel, S. J., Pollard, D. D. & Segall, P. 1988. Development of simple strike-slip fault zones, Mount Abbot quadrangle, Sierra Nevada, California. Geological Society of America Bulletin 100, 1451-1465. McGrath, A. G. & Davison, I. 1995. Damage Zone Geometry Around Fault Tips. Journal of Structural Geology 17(7), 1011-1024. Nur, A. 1982. The origin of tensile fracture lineaments. Journal of Structural Geology 4, 31-40. Olson, J. & Pollard, D. D. 1989. Inferring paleostress from natural fracture pattern: A new method. Geology 17, 345-348. Olson, J. E. 1993. Joint pattern development: Effects of subcritical crack growth and mechanical crack interaction. Journal of Geophysical Research 98, 1225112265. Pollard, D. D. & Aydin, A. 1988. Progress in understanding jointing over the past century. Geological Society of America Bulletin 100, 1181-1204 Pollard, D. D. & Segall, P. 1987. Theoretical displacements and stresses near fractures in rock: with applications of faults, joints, veins, dikes, and solution surfaces. In: Fracture Mechanics of Rock (edited by Atkinson, B. K.). Academic Press, London. 277-349. Pollard, D. D., Segall, P. & Delaney, P. T. 1982. Formation and interpretation of dilatant echelon cracks. Geological Societyof America Bulletin 93, 12911303. Renshaw, C. E. & Pollard, D. D. 1994. Are large differential stresses required for straight fracture propagation. Journal of Structural Geology 16, 817-822. Renshaw, C. E. & Pollard, D. D. 1994. Numerical simulation of fracture set formation: A fracture mechanics model consistent with experimental observations. Journal of Geophysical Research 99, 9359-9372. Rummel, F. 1987. Fracture mechanics approach to hydraulic fracturing stress measurements. In: Fracture Mechanics of Rock (edited by Atkinson, B. K.). Academic Press, London. 217-239. Secor, D. T. 1965. Role of fluid pressure in jointing. American Journal of Science 263, 633-646. Segall, P. & Pollard, D. D. 1980. Mechanics of discontinuous faults. Journal of Geophysical Research 85, 4337-4350. Segall, P. & Pollard, D. D. 1983. Joint formation in granitic rock of the Sierra Nevada. Geological Society of America Bulletin 94, 563-575. Segall, P. & Pollard, D. D. 1983. Nucleation and growth of strike-slip faults in granite. Journal of Geophysical Research 88, 555-568. Segall, P. 1984. Formation and growth of extensional fracture sets. Geological Society of America Bulletin 95, 454-462 . Yielding, G., Walsh, J. & Watterson, J. 1992. The Prediction of Small-scale Faulting in Reservoirs. First Break 10(12), 449-460. CHARACTERISTICS OF FRACTURES AND FAULTS Physical descriptions Adams, J. 1982. Stress-relief buckles in the McFarland quarry, Ottawa. Canadian Journal of Earth Sciences 19, 1883-1887. Allmendinger, R. W., Gephart, J. W. & Marrett, R. A. 1989. Notes on fault slip analysis. In: Quantitative interpretation of joints and faults (edited by Allmandinger, R., Aydin, A., Engelder, T. & Pollard, D. D.). Geological Society of America, Boulder, Colorado. 1-68. Antonellini, M. & Aydin, A. 1994. Effect of Faulting on Fluid Flow in Porous Sandstones: Petrophysical Properties. American Association of Petroleum Geologists Bulletin 78(3), 355-377. Antonellini, M. & Aydin, A. 1995. Effect of faulting on fluid flow in porous sandstones: geometry and spatial distribution. American Association of Petroleum Geologists Bulletin 79(5), 642-671. Antonellini, M. A., Aydin, A. & Pollard, D. D. 1994. Microstructure of deformation bands in porous sandstones at Arches National Park, Utah. Journal of Structural Geology 16, 941-959. Aydin, A. & DeGraff, J. M. 1988. Evolution of polygonal fracture patterns in lava flows. Science 239, 441-532. Aydin, A. & Johnson, A. M. 1978. Development of faults as zones of deformation bands and as slip surfaces in sandstones. Pure and Applied Geophysics 116, 931-942. Aydin, A. & Johnson, A. M. 1983. Analysis of faulting in porous sandstones. Journal of Structural Geology 5, 19-31. Aydin, A. 1978. Small faults formed as deformation bands in sandstone. Pure and Applied Geophysics 116, 913-930. DeGraff, J. M. & Aydin, A. 1987. Surface morphology of columnar joints and its significance to mechanics and direction of joint growth. Geological Society of America Bulletin 99, 605-617. Einstein, H. H. & Dershowitz, W. S. 1990. Tensile and shear fracturing in predominantly compressive stress fields - a review. Engineering Geology 29, 149-172. Engelder, T. 1987. Joints and shear fractures is rock. In: Fracture Mechanics of Rock (edited by Atkinson, B. K.). Academic Press, London. 27-69. Hodgson, R. A. 1961. Classification of structures on joint surfaces. American Journal of Science 259, 493-502. Huntoon, P. W. 1986. Incredible tale of Texasgulf well 7 and fracture permeability, Paradox basin, Utah. Ground Water 24,643-653. Kranz, R. L. 1983. Microcracks in rocks: a review. Tectonophysics 100, 449-480. Kulander, B. R., Dean, S. L. & Ward, B. J. 1990. Fractured Core Analysis: Interpretation, Logging, and the Use of Natural and Induced Fractures in Core. Lindsay, N. G., Murphy, F. C., Walsh, J. J. & Watterson, J. 1993. Outcrop Studies of Shale Smears on Fault Surfaces. Spec. Publs. Int. Ass. Sediment. 15, 113123. Fractals and stochastic Barton, C. C. & Larsen, E. 1985. Fractal geometry of two-dimensional fracture networks at Yucca Mountain, southwestern Nevada. Fundamentals of rock joints: Proceedings of the International Symposium on Fundamentals of Rock Joints, Björkliden, Sweden, Centek Publishers. Barton, C.C. 1995. Fractal analysis of the scaling and spatial clustering of fractures. In: Fractals in petroleum geology and earth sciences. C.C. Barton and P.R. Lapointe. Eds. New York, Plenum Publishing. Cowie, P. A. & Scholtz, C. H. 1992. Displacement-length scaling relationship for faults: data synthesis and discussion. Journal of Structural Geology 14, 11491156. Cowie, P. A. & Scholtz, C. H. 1992. Physical explanation for the displacementlength relationship of faults using a post-yield fracture mechanics model. Journal of Structural Geology 14, 1133-1148. Dawers, N. H. & Anders, M. H. 1995. Displacement-length scaling and fault linkage. Journal of Structural Geology 17(5), 607-614. Dershowitz, W. S. & Einstein, H. H. 1988. Characterizing rock joint geometry with joint system models. Rock Mech. And Rock Eng. 21, 21-52. Gillespie, P. A., Howard, C. B., Walsh, J. J. & Watterson, J. 1993. Measurement and characterisation of spatial distributions of fractures. Tectonophysics 226, 113-141. Power, W.L. and T.E. Tullis. 1991. Euclidean and fractal models for the description of rock roughness. J. Geophys. Res. 96(B1), 415-424. Gillespie, P. A., Walsh, J. J. & Watterson, J. 1992. Limitations of dimension and displacement data from single faults and the consequences for data analysis and interpretation. Journal of Structural Geology 14(10), 1157-1172 La Pointe, P. R. & Hudson, J. A. 1985. Characterizing and interpretation of rock mass joint patterns. Geological Society of America Special Paper 199, 37pp. Wu, H. & Pollard, D. D. 1991. Fracture spacing, density, and distribution in layered rock masses: Results from a new experimental technique. In: Rock Mechanics as a Multidisciplinary Science Proceedings of the 32nd United StatesSymposium (edited by Roegiers, J.-C.). A.A. Balkema, Rotterdam. 1175-1184. Renshaw, C. 1999. Connectivity of joint networks with power law length distributions. WRR. V. 35, no. 9, pp. 2661-2670. Renshaw, C.E> and J.C. Park. 1997. Effect of mechnanical interaction on the scaling of fracture length and aperture. Nature. 386, 482-484. Renshaw, C.E. 1999. Computationally efficient models for the growth of large fracture systems, in Fractures of Rock, edited by M.H. Aliabaudi, pp. 83-124. WIT Press, Boston, Mass. Renshaw, C.E. 1998. Sample bias and the scaling of hydraulic conductivity in fractured rock. Geophys. Res. Lett, 25, 121-124. Renshaw, C.E. 1997. Mechanical controls on the spatial density of opening mode fracture networks. Geology, 25, 923-926. Renshaw, C.E. On the relationship between mechanical and hydraulic apertures in rough-walled fractures, J. Geophys. Res. 100, 24, 629-24,636. Renshaw, C.E. and C.F. Harvey. 1994. Propagation velocity of a natural hydraulic fracture in a poroelastic medium, J.Geophys. Res. 99, 21, 667-21,677. Fracture permeability and seal Barton, C. C. & Hsieh, P. A. 1989. Physical and hydrological flow properties of fractures: Field Trip Guidebook T385. 28th International Geological Congress, Washington, D. C., American Geophysical Union. Brace, W. F. 1980. Permeability of crystalline and argillaceous rocks. Journal Rock Mech. 17, 241-251. Brown, S. R. 1987. Fluid flow through rock joints: The effect of surface roughness. Journal of Geophysical Research 92, 1337-1347. Caine, J. S., Evans, J. P. & Forster, C. B. 1996. Fault Zone Architecture and Permeability Structure. Journal of Geology 24(11), 1025-1028. Downey, M. W. 1984. Evaluating Seals for Hydrocarbon Accumulations. AAPG Bulletin 68(11), 1752-1763. Gale, J. Assessing the permeability characteristics of fractured rock. Geol. Soc. Am. Special Paper 189. 1982. Pp. 163-181. Heffer, K. & Lean, J. C. 1993. Earth Stress Orientation - A Control On, and Guide To, Flooding Directionality in a Majority of Reservoirs, Reservoir Characterization III. Penn Well Books Knipe, R. J. 1997. Juxtaposition and Seal Diagrams to Help Analyze Fault Seals in Hydrocarbon Reservoirs. American Association of Petroleum Geologists Bulletin 81(2), 187-195. Nelson, R. A. 1985. Geologic Analysis of Naturally Fractured Reservoirs. Gulf Publishing. Parsons, R.W. 1966. Permeability of idealized fractured rock. Soc. Petrol. Eng. Jour. June 1966. 126-136. Smith, D. 1966. Theoretical Considerations of Sealing and Non-sealing Faults. American Association of Petroleum Geologists Bulletin 50(2), 363-374. Watts, N. L. 1987. Theoretical Aspects of Cap-rock and Fault Seals for Single- and Two-phase Hydrocarbon Columns. Marine and Petroleum Geology 4, 274307. Yielding, G., Freeman, B. & Needham, D. T. 1997. Quantitative Fault Seal Prediction. AAPG Bulletin 81(6), 897-917. Ruland, W.W., J.A. Cherry, S. Feenstra. The depth of fractures and active ground-water flow in a clayey till plain in southwestern Ontario. Ground Water. V.29. N3, 1991, 405417. Keller, C.K., G. van der Kamp, and J.A. Cherry. 1986.Fracture permeability and groundwater flow in clayey till near Saskatoon, Saskatchewan. Canadian geotechnical Journal. V. 23, pp. 229-240. Keller, C.K., G. van der Kamp, and J.A. Cherry. 1988.Hydrogeology of two Saskatchewan tills, I. Fractures, bulk permeability, and spatial variability of dodwnward flow. Journal of Hydrology. 101, 97-121. Keller, C.K., G. van der Kamp, and J.A. Cherry. 1989. A multi-scale study of the permeability of a thick clayey till. Water Resources Research 25(11), 2299-2317. Soderman, L.G. and Y.D. Kim. 1969. Effect of ground water levels on stress history of the St. Clair clay till deposit. Canadian Geotechnical Journal. V.7, pp. 173187. Adams, J.I. 1969. Effect of ground water levels on stress history of the St. Clair clay till deposit: discussion. Canadian Geotechnical Journal. V. 7, pp. 190-193. D’Astous, A.Y., W.W. Ruland, J.R.G. Bruce and J.A. Cherry. 1989. Fracture effects in the shallow ground water zone in weathered Sarnia area clay. Canadian Geotechnical Journal, v. 27. Page?? Warren, J. and P. Root. 1963. The behavior of naturally fractured reservoirs, Trans AIME, 228, 245-255. Induced fractures Khristianovic, S.A. and Y.P. Zheltov. 1955. Formation of vertical fractures by means of highly viscous liquid. In: Proc. 4th World Petroleum Congress, Rome. 2:579-586. Propagation Abe, H., T. Mura, and L.M. Keer. 1976. Growth rate of a penny-shaped crack in hydraulic fracturing of rocks. J. Geophys. Res. 81:5335-5340. Abou-Sayed, A.S. 1977. Fracture toughness triaxially loaded Indiana limestone. in: Proc. 18th U.S. Sym. Rock Mech. 1-8. Abou-Sayed, A.S., K.P. Sinha and R.J. Clifton. 1984. Evaluation of the influence of insitu reservoir conditions in the geometry of hydraulic fractures using a 3-D simulator: Part 1--Technical Approach, SPE Paper 12877. In: Proc. Uncon. Gas Rec. Sym., Pittsburg, PA.(May) 433-438. Clark, J.B. 1949. A hydraulic process for increasing the productivity of wells. Petr. Trans. AIME. 2510:1-8. Barenblatt, G.I. 1962. The mathematical theory of equilibrium cracks in brittle fracture. Adv. Appl. Mech. 7:55-129. Baski, H. 1987. Hydrofracturing of water wells. Water Well J. 41:6:34-35. Biot, M.A., L. Masse and W.L. Medlin. 1982. A two-dimensional theory of fracture propogation, SPE Paper 11067. In: Proc. Ann. SPE Fall Tech. Conf., New Orleans, LA. 1-15. Carter, R.D. Appendix to paper by C.C. Howard and C.R. Fast. Optimum fluid characteristics for fracture extension. Drilling and Prod. Prac., API (1957) p 267. Ernst, P. 1980. Linking of boreholes. Meded. Rijks. Geol. Dienst. 33:35-40. Lab experiments Medlin, W.L. and L. Masse. 1979. Laboratory investigation of fracture initiation pressure and orientation. Soc. Petr. Eng. J. 129-144. Medlin, W.L. and L. Masse. 1982. Plasticity effects in hydraulic fracturing, SPE Paper 11068. In: Proc. Ann. SPE Fall Tech. Conf., New Orleans, LA. 1-14. Medlin, W.L. and L. Masse. 1984. Laboratory experiements in fracture propagation. Soc. Petr. Eng. J. 256-268. Ahmed, U., J. Strawn, M. Wilson and J. Schatz. 1983. Effect of stress distribution on hydraulic fracture geometry: A laboratory simulation study in one meter cubic blocks, SPE Paper 11637. In: Proc. SPE Sym. Low Permeability, Denver, CO. 15. Anderson, G.D. 1979. Laboratory experiments on hydraulic fracture growth near an interface. In: Proc. U.S. Sym. Rock Mech., Golden, CO. 19:333-339. Daneshy, A.A. 1973a. Experimental investigation of hydraulic fracturing through perforations, SPE Paper 4333. In: Proc. 2nd Ann. SPE European Meeting, London, England. 1-12. Babcock, R.E., C.L. Prokop and R.O. Kehle. 1967. Distribution of propping agents in vertical fractures. Prod. Monthly. 11-18. Stress testing and pressure analysis Massarch, K.R., R.D. Holtz, B.G. Holm and A. Fredriksson. 1975. Measurement of horizontal in-situ stresses. In: Proc. ASCE-GED Spec. Conf. In-situ Meas. Soil Prop., Raleigh, NC. 1:266-286. Massarsch, K.R. 1978. New aspects of soil fracturing in clay. J. Geotech. Eng. Div. GT8:1109-1123. Abou-Sayed, A.S., C.E. Brechtel and R.J. Clifton. 1978. In-situ stress determination by hydrofracturing: A fracture mechanics approach. J. Geop. Res. 83:2851-2862. Fairhurst, C. 1964. Measurement of in-situ rock stresses, with particular reference to hydraulic fracturing. Felsmechanik. 2:129-147. Gronseth, J.M. 1979. Stress determination by hydraulic fracturing. Improved stress determination procedures by hydraulic fracturing. Univ. of Minn., Civil & Mineral Eng Dept. Minneapolis. 1-114. Kehle, R.O. 1964. The determination of tectonic stresses through analysis of hydraulic well fracturing. J. Geop. Res. 69:259-273. Aamodt, R.L. and M. Kuriyagawa. 1982. Measurement of instantaneous shut-in pressure in crystalline rock. Analogs Anderson, R.A. 1974. Slurry injection of vein materials in the Coeur d'Alene district. Economic Geology. 69:414-415. Bryant, D.G. 1968. Intrusive breccias associated with ore, Warren (Bisbee) Mining District, Arizona. Economic Geology. 63:1-12. Farmin, R. 1934. Pebble dikes and associated mineralization at Tintic, Utah. Economic Geology. 29:356-370. Geotechnical Brooker, E.W. and H.O. Ireland. 1965. Earth pressures at rest related to stress history. Canadian Geotech. J. 2:1-15. Brunsing, T.P. 1987. The block displacement method field demonstration and specifications. U.S. EPA Project Summary. 600-S2-87-023:1-6. Brunsing, T.P. and R.B. Henderson. 1984. A laboratory technique for assessing the insitu constructability of a bottom barrier for waste isolation. In: Proc. Nat. Conf. Manag. Uncont. Haz. Wast. Sites, Washington, DC. 135-140. Bjerrum, L. and K.H. Andersen. 1972. In-situ measurement of lateral pressures in clay. Geotechnique. 15:11-20. Bjerrum, L., J.K.L. Nash, R.M. Kennard and R.E. Gibson. 1972. Hydraulic fracturing in field permeability testing. Geotechnique. 22:319-332. FLOW THROUGH FRACTURES Berkowitz, B., J. Bear and C. Braester. 1988. Continuum models for contaminant transport in fractured porous formations. Water Resources Research, v. 24, no. 8, pp. 1225-1236. Grisak, G.E. and J.F. Pickens. 1981. An analytical solution for solute transport through fractured media with matrix diffusion. Journal of Hydrology. v. 52, pp 47-57. Lee, R.R., R.H. Ketelle, J.M. Bowdns, and T.A. Rizk. 1992. Aquifer analysis and modeling in a fractured, heterogeneous medium. Ground Water, v. 30, no. 4, pp. 589-597. Long, J.C.S., J.S. Remer, C.R. Wilson, and P.A. Witherspoon. 1982. Porous media equivalents for network of discontinuous fractures. Water Resources Research. V. 18, no. 3, pp 645-658. Goodman, R. The mechanical properties of joints, Proceedings of the Third Congress, vol. 1, part A, pp 127-140. Int. Soc. Rock Mech, Denver, CO, 1974. McKay, L.D., R.W. Gillham, and J.A. Cherry. 1993. Field experiments in fractured clay till 2. Solute and colloid transport. Water Resources Research. V. 29, no. 12, pp. 38793890. Rubin, H., A. M. Soliman, J. Birkholzer, and G. Rouve. 1996. Transport of a tracer slug in a fractured permeable formation. Journal of Hydrology. v. 176, pp. 153-180. Sanford, W.E. and D.K. Solomon. 1995. Noble gas solute tracer experiment in a fractured, weathered shale near Oak Ridge, TN. Intl. Assoc, of Hydrogeol. Congress, Edmonton, Alberta, Canada. June 5-10. Snow, D.T. 1969. Anisotropic permeability of fractured media. Water Resources Research. v.5.no.6, pp. 1273-1289. Snow, D.T. 1970. The frequency and apertures of fractures in rock. International Jour. Rock Mech. Min Sci. 7, p. 23. Sudicky, E.A. and R.G. McLaren. 1992. The Laplace transform Galerkin technique for large-scale simulation of mass transport in discretely fractured porous formations. WRR v. 28, no. 2, pp 499-514. Balberg, I. And Binenbaum, N. 1983. Computer study of the percolation threshold in a two-dimensional anisotropic system of conducting sticks. Phys. Rev. B. 28, 3799-3812. Brace, W.F., 1978. A note on permeability changes in geological material due to stress. Pageoph 116, 627-633. Kirkpatrick, S. 1973. Percolation and conduction. Rev. Mod. Phys. 45, 574-588. Oda, M. Permeability tensor for discontinuous rock masses. Geotechnique, 35, 483-495. Walsh, J.B. 1965. The effects of cracks on the compressibility of rock, J. Geophys. Res, 70, 381-389. WELL TESTS TO EVALUATE FRACTURED FORMATIONS Gringarten, A.C. 1984. Interpretation of tests in fissured and multilayered reservoirs with double porosity behavior: theory and practice. Journal Petroleum Technology. April. 549-564. Moench, A.F. 1984. Double porosity models for a fissured groundwater reservoir with fracture skin. WRR, 20, 831-846. Warren, J.E. and P.J. Root. 1963. The behavior of naturally fractured reservoirs. Soc. Pet. Eng. Jour. Sept. 245-255. Morrisson, T.E. and J.H. Henderson. 1960. Gravity drainage of oil into large horizontal fractures. Petr. Trans. AIME. 219:7-15. Hartsock, J.H. and J.E. Warren. 1961. The effect of horizontal hydraulic fracturing on well performance. J. Petr. Tech., Trans. AIME. 1050-1056. McGuire, W.J. and V.J. Sikora. 1960. The effect of vertical fractures on well productivity. Petr. Trans. AIME. 219:401-403. Dyes, A.B., C.E. Kemp and B.H. Claude. 1958. Effect of fractures on sweep-out pattern. Petr. Trans. AIME. 213:245-248. Elbel, J.L. and P.A. Sookprasong. 1987. Use of cumulative-production type curves in fracture design. SPE Production Engineering. 2:191-198. Landrum, B.L. and P.B. Crawford. 1961. Horizontal fractures do affect ultimate recovery. The Petroleum Engineer. 80-98. Cinco-Ley, H., V.F. Samaniego and A. Dominguez. 1981. Transient pressure analysis for fractured wells. J. Petr. Tech., Trans. AIME. 1749-1764. Cinco-Ley, H., V.F. Samaniego and N.A. Dominguez. 1978. Transient pressure behavior for a well with a finite-conductivity vertical fracture. Soc. Petr. Eng. J. 253-264. Gringarten, A.C. 1982. Flow-test evaluation of fractured reservoirs. Geol. Soc. Amer. Spec. Paper. 189:237-263. Gringarten, A.C. and H.J. Ramey. 1973. The use of source and Green's functions in solving unsteady flow problems in reservoirs. Soc. Petr. Eng. J. 285-296. Gringarten, A.C. and H.J. Ramey. 1974. Unsteady-state pressure distributions created by a well with a single horizontal fracture, partial penetration, or resticted entry. Soc. Petr. Eng. J. 413-426. Gringarten, A.C., H.J. Ramey and R. Raghaven. 1974. Unsteady-state pressure distributions created by a well with a single infinite-conductivity vertical fracture. Soc. Petr. Eng. J. 347-360. CASE HISTORIES