115 N. 2 nd West, Rexburg, ID 83440 • Ph: 208.356.3263 info@premiersitefurniture.com • www.premiersitefurniture.com
Division 12: Furnishings
12 93 00: Site Furniture
12 93 43: Site Seating and Tables - or-
SITE TABLES
Section 2 Site Work 02780:
Site, Street, and Mall Furnishings
PART 1 GENERAL
1.1
SECTION INCLUDES
A.
Tables
1.2
RELATED SECTIONS
A.
Section 12 93 23: Site Furnishings - Trash and Litter Receptors or Section 02871 – Site
Furnishings: Trash receptacles, tables, planters, bike racks and grilles.
B.
12 93 43: Site Seating and Tables – Site Benches
1.3
REFERENCES
A.
ASTM A 36 – Standard Specification for Carbon Structural Steel
B.
ASTM A 53 – Standard Specification for Pipe, Steel, Black, Welded, and Seamless.
C.
ASTM D 3359 – Crosshatch Adhesion Test.
D.
ADA – Americans with Disabilities requirements.
E.
SSPC-SP5/NACE No. 1 “White Metal Blast”
1.4
SUBMITTALS
12 93 43 – pg 1

A.
Submittal Procedures; submit the following items:
1.
Product data: Manufacturers data sheets to be used including: a.
Preparation instructions and recommendations. b.
Storage and handling requirements and recommendations. c.
Installation methods.
2.
Shop Drawings: Indicate materials, dimensions, tolerances, welding, fasteners, hardware, mounting, and finishes.
3.
Selection Samples: Color selections shall be made from the manufacturer’s standard color options found in the catalog.
4.
Manufacturer’s Certificates: Certify that products meet or exceed specified requirements.
5.
Manufacturer’s Warranty.
1.5
QUALITY ASSURANCE
A.
Manufacturer’s Qualifications: Minimum of 5 years experience manufacturing tables.
B.
Installer Qualifications: Minimum 3 years experience assembling and installing tables.
1.6
DELIVERY, STORAGE, AND HANDLING
A.
Store products in manufacturer’s unopened packing until ready for installation.
B.
Protect materials from exposure to the elements. Do not deliver until conditions are ready for installation.
1.7
WARRANTY
A.
Limited 3 year warrant on all site furnishings. This warranty does not cover any defects or failures resulting from vandalism, man-made or natural disasters, lack of maintenance, accidents, negligence, or wear and tear due to public abuse.
1.8
COORDINATION
A.
Coordinate work with other operations before, during, and after installation to avoid damage to materials.
PART 2 PRODUCTS
2.1 MANUFACTURER
12 93 43 – pg 2

A.
Acceptable Manufacturer:
Premier Site Furniture
115 North 2 nd West
Rexburg, ID, 83440
(208)-356-3263 www.premiersitefurniture.com info@premiersitefurniture.com
B.
Substitutions: Not Permitted
2.2 TABLES
A.
Hickory Series Tables
1.
H200: Square table top without umbrella hole. a. Table Top: b. e. f. g. h. i. c. d.
1)
2)
3)
Seats:
1)
Laser-cut 14 gauge, no less than 70% recycled, carbon steel.
No overlapping surfaces.
All joints fully welded.
Laser-cut 14 gauge, no less than 70% recycled, carbon steel.
2)
3)
No overlapping surfaces.
All joints fully welded.
Support Frame:
1) 3” square tubing.
Mounting:
1) Four 3/8 inch, 3-4 inch long, stainless steel bolts supplied by installer.
2) Embedded in concrete.
Length: 73 inches.
Width: 73 inches.
Height: 32 inches.
Weight: 240 lbs.
Finish: Sandblasted to white finish, epoxy primed, and powder coated with j.
“Super Durable” polyester top coat.
Colors:
1) As specified by Architect from manufacturer’s 10 standard “Super
Durable” polyester, powder coating colors.
2) Custom color as specified by the Architect.
2.
H200H: Square table top with umbrella hole. a. Table Top:
12 93 43 – pg 3

b. e. f. g. h. i. c. d.
1)
2)
3)
Seats:
1)
Laser-cut 14 gauge, no less than 70% recycled, carbon steel.
No overlapping surfaces.
All joints fully welded.
Laser-cut 14 gauge, no less than 70% recycled, carbon steel.
2)
3)
No overlapping surfaces.
All joints fully welded.
Support Frame:
1) 3” square tubing.
Mounting:
1) Four 3/8 inch, 3-4 inch long, stainless steel bolts supplied by installer.
2) Embedded in concrete.
Length: 73 inches.
Width: 73 inches.
Height: 32 inches.
Weight: 240 lbs.
Finish: Sandblasted to white finish, epoxy primed, and powder coated with
B.
Spruce Series Tables
1.
S100: Aluminum top without powder coated top. a. Table Top:
1) Anodized aluminum. j. b. c. d.
“Super Durable” polyester top coat.
Colors:
1) As specified by Architect from manufacturer’s 10 standard “Super
Durable” polyester, powder coating colors.
2) Custom color as specified by the Architect.
Seats:
1) Anodized aluminum.
Support Frame:
1) 2” square tubing.
End Panel: e. f. g. h.
1)
2)
10 gauge, 70% recycled, carbon steel.
Laser-cut logo as specified by the architect
3) No laser-cut logo
Mounting:
1) Four 3/8 inch, 3-4 inch long, stainless steel bolts supplied by installer.
Length: 96 inches.
Width: 57 inches.
Height: 31 inches.
12 93 43 – pg 4

i. j. k.
2)
Durable” polyester, powder coating colors.
Custom color as specified by the Architect.
2.
S100P: Aluminum top with powder coated top. a. Table Top:
1) Anodized aluminum. b.
Weight: 170 lbs.
Finish: Sandblasted to white finish, epoxy primed, and powder coated with
“Super Durable” polyester top coat.
Colors:
1) As specified by Architect from manufacturer’s 10 standard “Super c. d.
Seats:
1) Anodized aluminum.
Support Frame:
1) 2” square tubing.
End Panel:
1) 10 gauge, 70% recycled, carbon steel. e. f. g. h. i. j. k.
2)
3)
Laser-cut logo as specified by the architect
No laser-cut logo
Mounting:
1) Four 3/8 inch, 3-4 inch long, stainless steel bolts supplied by installer.
Length: 96 inches.
Width: 57 inches.
Height: 31 inches.
Weight: 170 lbs.
Finish: Sandblasted to white finish, epoxy primed, and powder coated with
“Super Durable” polyester top coat.
Colors:
1)
2)
As specified by Architect from manufacturer’s 10 standard “Super
Durable” polyester, powder coating colors.
Custom color as specified by the Architect.
PART 3 EXECUTION
3.1 ASSEMBLY
A.
Hickory Series tables are shipped fully assembled
B.
Spruce Series tables are shipped un-assembled
3.2 EXAMINATION
A.
Examine substrates upon which table will be installed.
12 93 43 – pg 5

B.
If substrate preparation is the responsibility of another entity, notify Architect of unsatisfactory preparation before proceeding.
C.
Commencement of work by installer constitutes acceptance of substrate preparation.
3.3 PREPARATION
A.
Clean surfaces thoroughly prior to installation.
3.4 INSTALLATION
A.
Install tables in accordance with manufacturer’s installation instructions.
B.
Install tables level, plumb, square, and correctly located per drawings.
C.
Surface Mount: Anchor table securely in place with 3/8 inch stainless steel anchor bolts through table mounting plates.
D.
Free Standing: Place in accordance with drawings.
3.5 MAINTENANCE
A.
To maintain finish clean tables once monthly with any non-abrasive, multi-purpose cleaner and a clean cloth.
3.6 PROTECTION
A.
Protect table from damage due to other construction operations until completion of project.
END OF SECTION
12 93 43 – pg 6