Railway Infrastructure
advertisement
RAIL DIRECTORY An initiative from AWEX – CENTRE OF MONS Rue du Chapitre 1 B - 7000 MONS Director: Pierre LIBIOULLE Tel: 32-(0)65316378 - Email: p.libioulle@awex.be February 2014 Walloon companies doing 574.8 km an hour! With the TGV high-speed train recently beating its own record by notching up a breakneck speed of 574.8 km an hour, Wallonia takes pride in its role as the starting blocks of the race towards mobility. After all, a Walloon company helped to make this feat possible by supplying the material for the new generation electronic control system on board the V150 as well as two auxiliary power converters. A symbolic victory for an industry at the cutting edge of progress! Criss-crossing the enlarged Europe in all directions using land transport is, without a doubt, one of the major axes of European development. In a world where there is no stopping progress and where everything has to take place in real time, a lot is at stake. Passenger and goods transport and, consequently, the communication infrastructures, are mapping out our economic future. Wallonia has always been well aware of this. It has not only set up one of the densest road and railway networks in Europe but has also succeeded, for over a century, in exporting its competencies throughout the world. As far back as 100 years ago… Walloon engineers already enjoy an international reputation. One of the most familiar names is Edouard Frankignoul, the world-famous inventor of the Franki piles, a foundation system patented in 1909. A high-flying entrepreneur, he was to rise to the head of a group based in Belgium and operating several foreign subsidiaries employing a workforce of over 5000. To illustrate their success, the Franki piles support San Francisco’s Golden Gate Bridge and the port of Amsterdam no less. A symbol of the capitalist adventure, Edouard Empain built up his empire in the construction and operation of secondary railways and the introduction of electric traction in urban transport in Belgium and in France. He also contributed to the emergence of one of the major electrical groups. The son of a primary school teacher, the strong personality of this autodidact was also put at the service of the companies run by King Léopold II abroad, always in the fields of transport and electricity (China, Egypt, Russia and Congo). Etienne Lenoir, for his part, carried out endless experiments and filed for numerous patents in enamelling, electrolysis and glass silvering techniques and in train braking and signalling systems. But, among the many inventions of Etienne Lenoir, the most remarkable is the internal combustion engine. Inspired by the American model, Georges Nagelmackers created the “Compagnie internationale des Wagons-Lits”, for Walloon companies and industrialists required to travel throughout Europe. Synonymous with comfort and luxury, the “blue trains” travelled the length and breadth of Europe, Asia and Africa. Taking the skills into the future As we have said, today Walloon companies are participating in the major rail and highway construction projects. Component manufacturers recognised for their knowhow and professionalism, they propose a broad spectrum of products ranging from the design, manufacture and maintenance of complete rail transportation system to the design and realisation of railway structures and civil engineering, as well as the manufacture of high security ticket barriers with fast opening and wicket gates. Others specialise in the production of metallic lifting, traction and stowing cables, of urban lamps, of motorway signal gantries or even the construction of bridges, roads and tracks, the design and manufacture of acoustic protection devices and equipment for structures with a high architectural value and buildings (stations, offices). Electronics are also an area of Walloon expertise, encompassing data merger technologies for secure navigation, a software suite for the automatic management and running of warehouses, designed especially for the transport and storage sector, and intelligent video surveillance techniques: traffic analysis, detection of specific events (traffics jams, dangerous behaviour), statistics and classification concerning road traffic… As far as services are concerned, Walloon companies specialising in the sale of new or refurbished railway material or studies into railway carriages operate world-wide. Aware of the wealth of its know-how, underpinned by far-reaching experience and advanced technical knowledge, Wallonia is looking to the future by supporting research and development. Many companies have in-house R&D departments that are already drawing up the blueprints of tomorrow’s mobility. For example, it took 14 months to design and to conduct trials and tests on the trains that allowed the TGV to smash its speed record. You see, wherever you are in the world, you are almost certain to pass through a gate manufactured in Wallonia, to use underground or railway trains made using Walloon know-how or to be kept safe by a video surveillance network made in Walloon. Have a good journey! TABLE OF CONTENTS ROLLING STOCK 1. Locomotive; Self-propelled machinery, Auto engine; coach, carriage; other rolling stock 2. Body / Chassis 3. Engineering consulting office / Research and development 4. Lighting, Electricity, electric device of command, Electronics (signalling system) 5. Software, ICT 6. Engine 7. Cable (electric, mechanical) 8. Coupling, clutch 9. Paintings (supplier, manufacturer) 10. Spare parts (wheel, bissel, bogie, box of axles, buffer, bearing, hook, window, windscreen…) 11. Repair, maintenance 12. Automotive interior equipment (Heating / air conditioning, seats, textile industry, accessories: ashtray, dirt container, toilet, other) 13. Security/control INFRASTRUCTURES 1. Elements of railroad (Point, railway ballast, bolt, traverse wood/concrete, crossing, nut, rear derailleur, rail, speed bump) 2. Engineering consulting office / Research and development 3. Lighting, Electricity, electric device of command, Electronics (signalling system) 4. Software, ICT 5. Train wash, products 6. Cable (electric, mechanical) 7. Repair, maintenance 8. Security/control (Barrier, level crossing over a railway - Rail signalling equipment (panel, pylon) - Organization of the Railway traffic 9. Civil engineering BUILDING Station, Maintenance workplace 1. Architecture/Design 2. Engineering consulting office / Research and development 3. Lighting, Electricity, electric device of command, Electronics (signalling system) 4. Software, ICT 5. Cable (electric, mechanical) 6. Repair, maintenance 7. Automaton 8. Security/control 9. Access control 10. Ticket office 11. Civil engineering 12. Paintings (supplier, manufacturer) SERVICES 1. Architecture/Design Architecture/Design 2. Engineering consulting office / Research and development 3. Lighting, Electricity, electric device of command, Electronics (signalling system) 4. Software, ICT 5. Test center 6. Certification 7. Rent/Sale railroad equipment 8. Goods traffic 9. Tourism 10. Repair, maintenance 11. Automaton 12. Security/control 13. Horeca, catering 14. Sound 15. Professional federation ROLLING STOCK 1. Locomotive, self-propelled machinery, Auto engine, coach, carriage), other rolling stock AGC GLASS EUROPE ALKAR TECHNOLOGY ALSTOM BELGIUM GMM GROUPE 2. Body / Chassis ALKAR TECHNOLOGY CML INDUSTRIES GMM GROUPE MEUNIER GROUP 3. Engineering consulting office / Research and development ALKAR TECHNOLOGY BTCI BUREAU MERTENS CMI DAXI GMM GROUPE THELIS TRANSURB TECHNIRAIL 4. Lighting, Electricity, electric device of command, Electronics (signalling system) AGEMA AUXILIAIRE GENERALE DE MANUTENTION AKKA BENELUX ALSTOM BELGIUM ATELIERS DE CONSTRUCTION ELECTRIQUE INDUSTRIELLE ACEI ATELIERS HUBERT GERKEN BERVAES ET FILS COONEN GRAPHICS GARNIMETAL GILLAM-FEI GMM GROUPE INGRIF GROUPE RICHARD FLAMEE KST LIGHTING LOGIPLUS REALITY SYS SOMEI TRANSURB TECHNIRAIL YDETEC ELECTRONICS 5. Software, ICT AKKA BENELUX EWON GILLAM-FEI RA CONCEPT THELIS TRANSURB TECHNIRAIL 6. Engine CARLOR ENGINEERING CMI KLUBER LUBRICATION MOTEURS MOES 7. Cable (electric, mechanical) 8. Coupling, clutch A.V.D. BELGIUM KLUBER LUBRICATION TWIN DISC INTERNATIONAL 9. Paintings (supplier, manufacturer) APRUZZESE GROUP BELGIUM COATINGS 10. Spare parts (wheel, bissel, bogie, box of axles, buffer, bearing, hook, window, windscreen …) ALSTOM BELGIUM AMPCO METAL ANDIMAN ARCELORMITTAL RINGMILL ASPEL GROUP AVD BELGIUM BELGCAST BERVAES ET FILS BTCI BUREAU MERTENS CAPAUL CMI DAXI DECOLTAFRAMO DURANT FRERES ETS FABRIRESSORT FEKA GALVAMETAUX IBB GROUP JK SERVICE KLUBER LUBRICATION LES RESSORTS WILFART MOCKEL RESARM ENGINEERING PLASTICS RESSORTS KESSEN SOMEI UDF AUTOMOTIVE BELGIUM USIMAINTENANCE VALDUNES BELUX YDETEC ELECTRONICS 11. Repair, maintenance ALSTOM BELGIUM ATELIER DE SALZINNES BKE-MACHINES INTERNATIONAL CMI DAXI GMM GROUPE IBB GROUP INGRIF GROUPE RICHARD FLAMEE KLUBER LUBRICATION MONNAIE-BAYS RAIL & TRACTION INTERNATIONAL RUST-ANODE SNCB SNCB ATELIER DE TRACTION DE CHARLEROI SNCB ATELIER CENTRAL DE CUESMES SNCB ATELIER DE MONCEAU SNCB ATELIER DE SALZINNES SOMEI THERMO-CLEAN WALLONIE - FRANCE NORD TRAINANCE TRANSURB TECHNIRAIL UDF AUTOMOTIVE BELGIUM 12. Automotive interior equipment (Heating / air conditioning, seats, textile industry, accessories: ashtray, dirt container, toilet, other) AKKA BENELUX CML INDUSTRIES GARNIMETAL KLUBER LUBRICATION MEUNIER GROUP RA CONCEPT TRANSURB TECHNIRAIL 13. Security/control AKKA BENELUX INGRIF GROUPE RICHARD FLAMEE TRANSURB TECHNIRAIL INFRASTRUCTURES 1. Elements of railroad (Point, railway ballast, bolt, traverse wood/concrete, crossing, nut, rear derailleur, rail, speed bump) ALSTOM BELGIUM ATELIER DE BASCOUP GANTREX GANTRY RAILING CONTINENTAL INFRABEL ITB-TRADETECH LAPOTRE ET FILS ETS LEBOIS LES ACIERIES DE LA MEUSE MECANIQUE FERROVIAIRE DEVELOPPEMENT PRECIRONDS PREFABRICATION ET FERRAILLAGE PREFER PREFARAILS RAIL & ROAD SERVICE RAIL EUROPE REPROCOVER RECYCLING PRODUCT COVERS RUBBERGREEN TN TERRASSEMENTS TRANSURB TECHNIRAIL UNISTEEL USIMAINTENANCE WOIT (NOUVELLE SOCIETE) WÜRTH INDUSTRY BELUX 2. Engineering consulting office / Research and development BUREAU D’ETUDES JASON BEJ BUREAU D’ETUDES PIERRE BERGER BUREAU MERTENS DAXI DELAUNOIT GROUP GMM GROUPE ITB-TRADETECH MICE MULTITEL NIZET RONVEAUX E. ETS TENSEN & HUON THELIS TRANSURB TECHNIRAIL 3. Lighting, Electricity, electric device of command, Electronics (signalling system) AKKA BENELUX ALPHA TECHNOLOGIES ALSTOM BELGIUM AS RAIL ATELIERS DE CONSTRUCTION ELECTRIQUE INDUSTRIELLE ACEI COLAS RAIL CSE SAMAPHORE BELGIUM DUCHENE GILLAM-FEI HEINEN ELECTROTECH MULTITEL RONVEAUX E. ETS TRANSURB TECHNIRAIL YVAN PAQUE (ETABLISSEMENTS) 4. Software, ICT AKKA BENELUX GILLAM-FEI MULTITEL NSILITION THELIS TRANSURB TECHNIRAIL VIRTUAL TECHNOLOGY 5. Train wash, products TECCONCEPT TREATMENT ENGINEERING CLEANING CONCEPT 6. Cable (electric, mechanical) HEINEN ELECTROTECH JEROUVILLE NEXANS BENELUX YVAN PAQUE (ETABLISSEMENTS) 7. Repair, maintenance ALSTOM BELGIUM BKE-MACHINES INTERNATIONAL COLAS RAIL DELAUNOIT GROUP GANTREX GANTRY RAILING CONTINENTAL GMM GROUPE INFRABEL JEROUVILLE MONNAIE-BAYS RAIL & ROAD SERVICE RUST-ANODE SOGELUB SOMEI TRANSURB TECHNIRAIL 8. Security/control CSE SAMAPHORE BELGIUM GMM GROUPE INFRABEL MULTITEL TRANSURB TECHNIRAIL Barrier, level crossing over a railway Rail signalling equipment (panel, pylon) BAGECI COLAS RAIL CSE SAMAPHORE BELGIUM HEINEN ELECTROTECH INFRABEL MECANIQUE FERROVIAIRE DEVELOPPEMENT MULTITEL NGL RAIL & ROAD SERVICE TN TERRASSEMENTS Organization of the Railway traffic AKKA BENELUX ALSTOM BELGIUM AS RAIL COFELY FABRICOM INFRABEL TRANSURB TECHNIRAIL 9. Civil engineering BAGECI BESIX DHERTE DUCHENE ELLYPS FRANKI GALERE G-TEC LOUIS ENGINEERING MICE RONVEAUX E. ETS SOCOGETRA BUILDING (STATION, MAINTENANCE WORKPLACE) 1. Architecture/Design A&G ATELIER D'ARCHITECTURE AAL ATELIER D’ARCHITECTURE DE LAVAUX AGC GLASS EUROPE ALLES UBER HARRY ARCHITECTES ASSOCIÉS S.A. TECHNIQUES INFRASTRUCTURES S.A. ART-CHI-MADE ARTEC-ARCHITECTURE ASYMMETRIC ARCHITECTES ASSOCIES ATELIER D’ARCHITECTURE A2 ATELIER D’ARCHITECTURE DANIEL DELGOFFE ATELIER D’ARCHITECTURE DDV ATELIER D’ARCHITECTURE JOEL LOUIS BARATTUCCI & ASSOCIES BRUNO ALBERT ARCHITECTE ET ASSOCIES BUREAU D'ARCHITECTURE GREISCH BUREAU D’ETUDES ATELIER 5 SA CREER RENOVER CONSTRUIRE CRC ELLYPS INOV JUNGBLUTH ALU PARTNERS LI MARTKOOF URBA-STYLE WUST (ETABLISSEMENTS JEAN) GÉNÉRALES & 2. Engineering consulting office / Research and development BUREAU D’ETUDES JASON BEJ BUREAU D’ETUDES PIERRE BERGER BUREAU D'ETUDES PIRNAY ELLYPS JUNGBLUTH ALU PARTNERS TENSEN & HUON THELIS TRANSURB TECHNIRAIL WUST (ETABLISSEMENTS JEAN) 3. Lighting, Electricity, electric device of command, Electronics (signalling system) ALPHA TECHNOLOGIES ARMONY CONCEPT ARTELUX ASPEL GROUP BERVAES ET FILS COLASSE COONEN GRAPHICS GARNIMETAL TRANSURB TECHNIRAIL VLUX 4. Software, ICT AP-TRANS GROUP THELIS TRANSURB TECHNIRAIL VIRTUAL TECHNOLOGY 5. Cable (electric, mechanical) TRANSURB TECHNIRAIL 6. Repair, maintenance BKE-MACHINES INTERNATIONAL MONNAIE-BAYS SNCB TRAINANCE 7. Automaton AP-TRANS GROUP EUTRONIX THELIS TRANSURB TECHNIRAIL 8. Security/control ACIC AP-TRANS GROUP AUTOMATIC SYSTEMS BEA CSE SAMAPHORE BELGIUM 9. Access control AP-TRANS GROUP AUTOMATIC SYSTEMS BEA EUTRONIX THELIS 10. Ticket office AP-TRANS GROUP EUTRONIX SNCB 11. Civil engineering ATELIERS ROGER PONCIN ET CIE BAGECI BAGETRA BESIX DHERTE DUCHENE ELLYPS FRANKI GALERE LOUIS ENGINEERING RONVEAUX E. ETS SOCOGETRA WUST (ETABLISSEMENTS JEAN) 12. Paintings (supplier, manufacturer) APRUZZESE GROUP BELGIUM COATINGS SERVICES 1. Architecture/Design A&G ATELIER D'ARCHITECTURE AAL ATELIER D’ARCHITECTURE DE LAVAUX ALLES UBER HARRY ARCHITECTES ASSOCIÉS S.A. TECHNIQUES INFRASTRUCTURES S.A. ART-CHI-MADE ARTEC-ARCHITECTURE ASYMMETRIC ARCHITECTES ASSOCIES ATELIER D’ARCHITECTURE A2 ATELIER D’ARCHITECTURE DANIEL DELGOFFE ATELIER D’ARCHITECTURE DDV ATELIER D’ARCHITECTURE JOEL LOUIS BARATTUCCI & ASSOCIES BRUNO ALBERT ARCHITECTE ET ASSOCIES GÉNÉRALES & BUREAU D'ARCHITECTURE GREISCH BUREAU D’ETUDES ATELIER 5 SA ELLYPS INOV JOHANSON3 LI MARTKOOF WUST (ETABLISSEMENTS JEAN) 2. Engineering consulting office / Research and development ALKAR TECHNOLOGY ALMADIUS BIZZDEV BUREAU MERTENS CMI DAXI ELLYPS LOUIS ENGINEERING TENSEN & HUON THELIS TRACTEBEL ENGINEERING TRANSURB TECHNIRAIL WATELET GERARD WUST (ETABLISSEMENTS JEAN) 3. Lighting, Electricity, electric device of command, Electronics (signalling system) ALPHA TECHNOLOGIES ALSTOM BELGIUM ARMONY CONCEPT ARTELUX ASPEL GROUP AS RAIL TRANSURB TECHNIRAIL 4. Software, ICT BIZZDEV LMS PULSAR CONSULTING RA CONCEPT THELIS TRANSURB TECHNIRAIL VIRTUAL TECHNOLOGY 5. Test center ALSTOM BELGIUM TRANSURB TECHNIRAIL 6. Certification BELGORAIL BFB OIL RESEARCH 7. Rent/Sale railroad equipment BUREAU MERTENS CMGC - MATLOC CMI DAXI RAIL & ROAD SERVICE TRANSURB TECHNIRAIL 8. Goods traffic SNCB TERMINAL CONTAINER ATHUS TCA TRAINSPORT 9. Tourism TRANSURB TECHNIRAIL WATELET GERARD 10. Repair, maintenance ABRACOR ALSTOM BELGIUM BKE-MACHINES INTERNATIONAL BUREAU MERTENS CMI MONNAIE-BAYS RAIL & ROAD SERVICE SNCB TRAINANCE 11. Automaton AP-TRANS GROUP EUTRONIX TRANSURB TECHNIRAIL 12. Security/control ACIC AP-TRANS GROUP BFB OIL RESEARCH COFELY FABRICOM EUTRONIX TRANSURB TECHNIRAIL 13. Horeca, catering 14. Sound 15. Professional federation, cluster AGORIA POLE MECATECH UWE – CELLULE MARKETING Back to homepage A&G ATELIER D'ARCHITECTURE Boulevard Initialis, 15 7000 MONS Tel: 32-(0)65803222 – Fax: 32-(0)65803836 Email: info@ag-archi.com - Web: www.ag-archi.com/en Contact person: Mr Etienne GODIMUS Design Office Our mission is to put our imagination, experience, and skills to work on projects, regardless of size. Our main job, therefore, is to listen to our clients: to keep their current (and future) needs, wishes, and dreams in mind, and to work within the means at their disposal to design legitimate architecture adapted to suit these requirements. A structure of quality is defined by its ability to harmoniously incorporate and accommodate all constraints involved in its construction. We are the cornerstone — the think tank that makes this possible by coordinating all of the thought processes that lead to the production of a tangible project. Quality assurance The quality of the service we provide is deeply rooted in our concern for the constant improvement of methods and communication at every level of the team in charge of a project. Convincing the client of our abilities Meeting the client’s functional, creative and technical expectations Guiding and supporting the client in the decision-making process Assisting the client with administrative and financial management Assisting the client in choosing the various contractors required (tradesmen and design offices) Being proactive Guaranteeing the quality of the finished product Acting as an administrative go-between with the authorities (urban planning regulations, compliance Back to homepage AAL ATELIER D'ARCHITECTURE DE LAVAUX Rue Lavaux, 1 4130 ESNEUX Tel: 32-(0)43803311 – Fax: 32(0)43803322 Email: aal@lavaux.be - p.pirard@lavaux.be - Web: www.lavaux.be Contact person: Mr Pierre PIRARD AAL, as Studio of Architecture of Lavaux, includes for more than 25 years, architects, engineers, designers, draftsmen Its activity turns in domains always more complex by means of competition and of public and/or private partnerships: office buildings, agencies and banking seats, centers of business or research, logistic centers of transport, laboratories, white rooms in the spatial domain or the mechanical micro computing, the water-treatment plants, specialized businesses, shopping malls and pharmacies, health care: psychiatric hospitals, rest homes, education: schools, training centers, developments of lots, urban planning, restoration of patrimonial buildings Back to homepage ABRACOR Rue de la Science, 2 1400 NIVELLES Tel: 32-(0)67220210 – Fax: 32(0)67220310 Email: p.lagrange@abracor.be - Web: www.abracor.com Contact person: Mr Patrick LAGRANGE ABRACOR presents almost an age of experience in commercialization of welding products and special products. the production and Welding electrodes Flux cored wire Solid wire Brazing Pickling products Back to homepage ACIC Boulevard Initialis, 28 7000 MONS Tel: 32-(0)65394380 – Fax: 32(0)65394381 Email: info@acic.eu - delaigle@acic.eu - Web: www.acic.eu Contact person: Mr Jean-François DELAIGLE Since 2003 ACIC has been offering cutting-edge innovative solutions in the field of automated and smart video surveillance. The company’s founders, who previously worked at the Multitel Research Center, inherited the knowledge and technologies of reputed Belgian university laboratories such as the UCL and UMons, and ACIC has continued to develop its state-of-the-art solutions through cooperation with these research units. With the tremendous increase in the number of cameras now in operation, automation of video surveillance has become essential, not only for sensitive locations and critical infrastructures, but also for city surveillance. ACIC designs and develops video analytics software that enables operators to automate the process of surveillance. The range of uses of video surveillance includes human presence detection and monitoring, tracking (humans, vehicles, boats, etc.), event detection, people counting, recognition of abnormal or threatening behavior, etc. Back to homepage AGC GLASS EUROPE Chaussée de La Hulpe, 166 1170 BRUXELLES Tel: 32-(0)26743111 – Fax: 32-(0)26724462 Email: headquarters@eu.agc-group.com - benoit.haegdorens@eu.agc-flatglass.com Web: www.agc-glass.eu Contact person: Mr Benoît HAEGDORENS The world’s leading power in flat glass AGC Glass Europe forms part of the world’s leading power in flat glass: AGC Glass. Based in Brussels, AGC Glass combines all the AGC activities in production, processing and distribution of flat glass. Business oriented organisation AGC Glass Europe is operating in the construction, the solar and the automotive industry with an organisation oriented towards these specific markets. Its three divisions Primary Operations, Building and Automotive - are supported by 7 transversal departments: Technology & Innovation, Supply Chain & Procurement, Finance & IT, HR & Communication, Legal & CSR, Public Affairs & Risk Management and the Strategy Office. The Primary Operations Division produces and supplies glass to the Building and Automotive divisions. Primary Operations produces raw glass in large dimensions (generally 6 x 3.21 m): float, coated glass (online or offline), patterned glass, laminated glass, fire-resistant glass and mirrors. Products are destined for processing. The processing is done either internally by the 2 other divisions, or externally by the customers themselves. The Building Division sells and distributes the raw glass to the construction industry (façade glazing and glass for interior decoration), and processes raw glass into finished building products through its Fabrication plants. It also sells and markets glass for solar applications: photovoltaic panels, concentrating solar mirrors (electricity generation) and thermal solar panels (production of hot water). The Automotive Division produces, sells and distributes a comprehensive range of automotive glazing (windshields, side windows, rear windscreens, panoramic roofs) for the OEM market (Original Equipment Manufacturing) and the ARG market (Automotive Replacement Glass). Its AVO units (Added Value Operations) add one or more components to automotive OEM glazing (fittings, antennas, rain sensors...) while the ARG activity operates distribution centers and fitting stations. The division also provides added-value products and service in transportation glass for the rail, maritime and specific vehicle markets. Our design office can also help you to make special machines from your specifications or a functional description. We handle the whole design and the complete production of the machine, and even its integration in your site Back to homepage AGEMA AUXILIAIRE GENERALE DE MANUTENTION Parc Industriel Nord - Avenue Nobel, 6 1300 WAVRE Tél: 32-(0)10242111 - Fax: 32-(0)10228397 Email: info@agema.be - dupont@agema.be - Web: www.agema.be Contact person: Mr Benoît DUPONT Since now more than 50 years, limited company AGEMA does not cease growing and sitting its reputation in the field of the electrification for the handling and lifting devices. Whether you are a private individual or a company, we have the solution for your general or specific needs. Our catalogue “products” places at your disposal a range of more than 8000 articles. You will find inter alia our various electric feeding systems for the monorail hoists, the overhead travelling cranes, the gantries and the transdtockeurs, the traversers. Back to homepage AGORIA Diamant building - Boulevard A. Reyers, 80 1030 BRUXELLES Tel: 32-(0)27067846 – Fax: 32-(0)27067854 Email: maxime.ancion@agoria.be - hainaut-namur@agoria.be – Web: www.agoria.be Contact person: Mr Maxime ANCION AGORIA is Belgium's largest employers' organisation and trade association. We are representing and helping more than 1,600 companies in the technology industry. AGORIA is Belgium's largest employers' organisation and trade association and is financed by member contributions. Our members are our driving force AGORIA is the partner of 1,600 companies in the technology industry. The federation's 230 employees provide the members with information, services and advice. Our members are our strength AGORIA doesn't let the strength of its member companies go to waste. We help to shape policy at regional, Federal and European level in a bid to improve the social and economic climate for companies in the technology industry. Back to homepage AKKA BENELUX Belgium South - Parc Industriel, Zone A 10 A 1440 BRAINE-LE-CHATEAU Tel: 32-(0)26743111 – Fax: 32-(0)26724462 Email: mail-benelux@akka.eu - r.dewilde@akka.eu Web: www.akka-benelux.eu/en/sectors/railways Contact person: Mr Roland DE WILDE Expertise, responsiveness and flexibility Since its creation in 1988, AKKA Benelux has been involved in large-scale industrial projects on behalf of major clients in Belgium’s main industrial sectors: Aeronautics, Railways, Pharmaceuticals, Automotive, Chemicals, Energy, Telecom, Multimedia Applications and many more. AKKA Benelux supports its clients by offering them the high-level expertise, responsiveness and flexibility they need to complete their industrial projects, in line with their quality and cost targets. At the heart of this approach, 400 employees work at our Design Engineering Centre or directly at our clients’ sites. Our management team attaches the highest importance to the advancement of our consultants, in terms of their expertise, their work/life balance and their comfort. Railways: From trains to signaling equipment AKKA Benelux supports the leaders of the railway industry in terms of railway infrastructure, trains and signalling equipment. Railway Infrastructure We cover train traffic organisation and control activities. This represents a wide range of products: power boxes, telecommunications, miscellaneous signalling and energy supply equipment, traffic control equipment, risks and passenger information. Trains Our engineers are involved in the design and start of production for locomotive traction systems. We also advise our clients about many train components such as electrical architecture, auxiliary converters, interior arrangements, signal equipment, train bornetrackside communications and embedded supervisory systems. In parallel, we cover RAMS studies and the sizing of the Integrated Logistic Support (ILS) system for these railway systems. Signalling Equipment We participate in the development and deployment of ERTMS (European Railway Traffic Management System), both at the Train-Borne level and Trackside. This includes the development of EVC (European Vital Computer) equipment, DMI (Driver Machine Interface), Eurobalise, odometers and telecommunications equipment. We contribute to deployment tools ERTMS implementation by means of deployment tools. Back to homepage ALKAR TECHNOLOGY Rue des Pastures, 95 1440 BRAINE-LE-CHATEAU Tel: 32-(0)64652082 – Fax: 32-(0)64555224 Email: alki@belgacom.net - Web: www.alkartechnology.com Contact person: Mr Alain KINARD ALKAR TECHNOLOGY is a highly innovative company with more than 25 years of experience in composites. The expertise focuses on RTM process as well as engineering and technology transfer & training. The company has developed the technology to produce a large cell composite honeycomb core based on RTM and continuous laminating processes. Alkar's STRUXELL, named after its aim of being a structural cellular material, was designed to meet the growing need for lightweight structures. Thanks to the high versatility of manufacturing processes and materials, STRUXELL can be produced for many structural railway applications such as floors, partitions, coach bodies etc. Our composite honeycomb is also available as FLEXELL, a strong cellular core material that allows to produce any sandwich curved shapes. All composite honeycomb products are fire resistant according to EN45-545. Through a strategic partnership, ALKAR TECHNOLOGY is also able to supply any composite machined and moulded parts for electrical insulation, containers, covers, shelves etc. The production partner is approved by the major rolling stock equipment manufacturers. Back to homepage ALLES UBER HARRY Rue de Rachecourt, 72 6782 HABERGY Tel: 32-(0)63446866 – Fax: 32-(0)63446866 Email: arnaud@allesuberharry.be - Web: www.allesuberharry.be Contact person: Mr Arnaud DECOLLE Architecture Back to homepage ALMADIUS Rue Charles Lamquet, 155/101 5100 JAMBES Tel: 32(0)81300286 – Fax: 32(0)81300385 Email: info@almadius.com - s.muguet@almadius.com - Web: www.almadius.com Contact person: Mr Stéphane MUGUET ALMADIUS is a consulting company active in the fields of engineering and environment. ALMADIUS was registered in early 2008, and since then provides consulting and technical assistance based on the expertise of its co-founders with over 50 years of cumulated experience in the following areas : structural engineering, roads and networks, wastewater and drainage, solid waste management, environment and energy, soil investigation and remediation, drinking water, geology, hydrogeology and works supervision. This experience has been acquired on domestic and international projects throughout the 5 continents. ALMADIUS is independent of any financial or industrial group. Its mission is to provide quality and effective services, which are in line with the expectations of its customers: the private sector, administrations, funding agencies and industries… Ethics, reliability, and timeliness remain the key strengths of ALMADIUS. Our engineers hold the VCA certificate. Back to homepage ALPHA TECHNOLOGIES Boulevard de l'Europe, 131 1301 WAVRE Tel: 32-(0)10438303 – Fax: 32-(0)10438213 Email: ydurieux@alphatechnologies.eu - Web: www.alphatechnologies.eu Contact person: Mr Yves DURIEUX With its alliance of companies providing world-class solutions for highly reliable energy demands, the Alpha Group can draw on the widest range of products to offer you the best possible powering and site solutions. The Alpha Group has a product portfolio that few companies can offer, plus a unique structure and organization that enables any company in the alliance, including Alpha Technologies in Belgium, to give you access to the combined expertise of our specialists around the world. Alpha provides solutions for all aspects of communications and network power, engineering complete systems for specific applications, technologies and regions: from a broadband outside plant enclosure in the north-facing wind-driven snow, to a megawatt grid-tied solar shade parking structure in the desert. Alpha provides powering solutions that allow our customers to better manage their assets and resources, and to better control their costs of ownership and operation, thereby contributing to sustainable development of their business. As a project-oriented organisation, Alpha Technologies offers its customers most complete service from the very moment they ask for a quote. Back to homepage ALSTOM BELGIUM Rue Cambier Dupret, 50-52 6001 MARCINELLE Tel: 32-(0)71445411 – Fax: 32-(0)71445777 Email: sonia.thibaut@alstom.com - Web: www.alstom.com Contact person: Mrs. Sonia THIBAUT With Alstom, designing fluidity becomes a reality With the focus on sustainable transport, Alstom Transport develops and offers the most complete range of systems, equipment and services on the rail market. Alstom Transport is capable of offering turnkey solutions for an entire transport system, from rolling stock to signalling and infrastructure. Turnkey systems: Transport Global Solutions for the future Faced by project's growing complexity, operators seek more and more global answers to their needs. Alstom combines all its transversal know-how as a multi-specialist manufacturer to manage complete rail systems: infrastructure, track laying, electrification, electric and mechanical equipment, rolling stock, signalling, depots, maintenance… both for tramway projects and metros, and for main lines or very highspeed lines. Global and integrated solutions guarantee optimised costs, reduced delivery times and an optimum performance level for all equipment. Regarding rail Infrastructures, Alstom proposes a complete range of sustainable solutions for track laying, electrification and electric power supply for lines, and the supply of electromechanical equipment for installation alongside tracks, in stations and in depots. Trains: a unique Rolling Stock-Components range With its recognised industrial strategy, using standardised components and paying particular attention to design, Alstom Transport offers a range of rolling stock that combines technology, reliability, capacity, safety, styling and comfort. Alstom is providing operators with sustainable solutions that respect the environment. The world centre of competencies for traction systems, auxiliary converters and low voltage cubicle prototypes for rolling stock is located in Belgium, ensuring the design, production and homologation of those major components. Rail Signalling: the brain of the rail At the cutting edge of information solutions, Alstom Transport Information Solutions provides operators with the means to guarantee entirely safe and fluid transport of passengers or goods, thereby optimising productivity for networks. The Centre for Signalling Activities and the worldwide ERTMS Development Centre are located in Belgium. They are responsible for the design, production, testing, homologation and implementation of national signalling trackside and on-board systems and equipment and for the European ERTMS solution. Rail Services: at the heart of businesses Alstom Train Life Services offers a range of customised services to public or private rail operators. The objective is to guarantee global, safe and optimised management of rolling stock -whether it is manufactured by Alstom or not-, signalling equipment and infrastructure throughout their operating life cycle: maintenance, renovation, technological upgrade, spare parts management, technical support and assistance. Back to homepage AMPCO METAL Rue Saint Vincent, 12 4020 LIEGE Tel: 32-(0)43404460 – Fax: 32-(0)43423017 Email: info@ampcometal.com - Web: www.ampcometal.com Contact person: Mr Eric DEKKERS AMPCO METAL is an integrated metal producer, offering under the AMPCO® and AMPCOLOY® brands, the widest range of premium specialty bronzes and copper alloys, providing exceptional physical and mechanical properties. Manufacturing of bronze hollow or full bars (for the railroad) Back to homepage ANDIMAN Rue de la Légende, 45 B 4141 SPRIMONT Tel: 32-(0)43607885 – Fax: 32-(0)43607886 – Mobile: 32-(0)473760089 Email: manuel.dimblon@andiman.be - Web: www.andiman.be Contact person: Mr Manuel DIMBLON ANDIMAN & CO has become a reference in the railway sector and is very active in the Benelux as well as in France and Germany. To meet the demands of its customers, ANDIMAN & CO has state-of-the-art equipment so that precision and high quality are always at their disposal. « Once a product has been completed, we make it available to the customer for carrying out a whole series of tests. If they meet expectations, a pre-series is launched and finally the production phase can start. In effect, the product continually develops according to the customer's requirements but also in accordance with increasingly stricter safety and technical standards. » « Your best partner for the manufacture of rail, defence and industrial components. » Strategically located in the centre of Europe, ANDIMAN & CO is logistically in direct contact with both air transport and shipping sites. Two hours by road is enough to reach the head offices of our main customers and railway logistics centres. Back to homepage APRUZZESE GROUP Rue Servais Malaise, 52 4030 GRIVEGNEE Tel: 32-(0)43675152 - Fax: 32-(0)43677251 – Mobile: 32-(0)485670670 Email: info@apruzzese.com - didier@apruzzese.com - Web: www.apruzzese.com Contact person: Mr Didier LE MAIRE Our history is that of a European company well before its times since it is about an emigrated Italian family which settles in Belgium, where they work and gradually extend their activities in the bordering countries. Founded in 1964 and boasting 45 years of experience, the APRUZZESE Group built a reputation in the fields of surface treatment, protection finishing on all kinds of supports. Walls (exterior and interior), ceilings, floors, facades, metal frames, overhead catenaries, high voltage polls, nuclear material, commercial vehicles or piping… there are no secrets for us anymore. The Group APRUZZESE is comprised of 4 companies: APRUZZESE S.A., ALTRA S.A., GAMMA PLAN S.A., and ARTS ET METIERS S.P.R.L. Each one is specialized in its field so as to satisfy the needs of the customers in the best possible way. Our trade consists in embellishing things, so it is normal that we take great importance to: Quality: concerned for the beautiful and the know-how of the techniques implemented, Safety: by constantly maintaining the physical integrity of people and goods, Durability: thanks to the constant attention to our environment and our privileged relationships with our suppliers. Thanks to the constant efforts of all the members in our Group, we are proud to rank among the most performing companies in Belgium. Industry sector Sanding, peeling, waterproofing Metallizing projection of zinc-aluminum molten Fire-resistant coating Paint, paint food (reservoir water, sugar, etc.) Construction sector Painting in public buildings and private Decorative walls, painting the old, old patine, decoration The soft covering soil Renovation of facades Restructuring of concretes Treatments in our workshops Blasting, blasting in our cabins Protection metallizing Anti-corrosion paint and finishing of all types Lacquering powder and baking Treatment by painting in the nuclear field Back to homepage AP-TRANS GROUP Drève d'Accensart, 8 1390 GREZ-DOICEAU Tel: 32-(0)26580010 – Fax: 32-(0)26580019 Email: info@aptrans.com - luc.steppe@aptrans-group.com Web: www.aptrans-group.com Contact person: Mr Luc STEPPE AP Trans is a visionary, innovative, global IT system integrator, supplying and operating advanced automated fare collection systems based on smart cards for the public transport industry. The AP Trans group is 100% owned by Prodata Mobility Systems, its headquarters are located in Belgium, near Brussels, and subsidiaries in Romania and Sweden. Besides the subsidiaries, AP Trans is teaming up with local partners to get a perfect understanding of the customer's requirements in order to realize the different AFC projects in accordance to the local business culture and within the given political and social framework of the country. The AP Trans group is focused on its core business, Automated Fare Collection systems. As an IT system integrator, the AP Trans group provides AFC system design, development, supply, implementation, roll out, maintenance and operation support during the whole lifetime of the implemented AFC systems. The business philosophy of the AP Trans group is to put the customer first. Listening to the customer and bringing an adequate solution to the customer's requirements is the highest ambition. Realizing a project in the given time frame and budget is always a priority. A permanent care to adapt the existing solutions to the latest industry standards and technology with respect to the smooth functioning of the system is another priority. The AP Trans product range includes advanced devices such as ticket issuers, driver units, on board WIFI communication devices with GPS capabilities, point of sales, automatic ticket vending machines, metro control gates, contactless smart card validators (indoor and outdoor), portable inspection devices, data communication equipment and software, back office software for small and medium sized transit operators as well as solutions for complex multi-model transit systems, including clearing house and settlement systems. The proposed AFC solutions from AP Trans are a sophisticated but proven mix of hardware, software and engineering expertise, based on the specific needs and requirements of the public transport industry. Back to homepage ARCELORMITTAL RINGMILL Rue de Marnix, 3 4100 SERAING Tel: 32-(0)43303535 – Fax: 32-(0)43377902 Email: frederic.biname@arcelormittalringmill.be - Web: www.arcelormittalringmill.be Contact person: Mr Frédéric BINAME ARCELORMITTAL RINGMILL (AMR) is a subsidiary of the ARCELORMITTAL Group (the worldwide leader in steel production and transformation) and is specialized in the manufacturing and heat processing of ring rolled products. ARCELORMITTAL RINGMILL’s organizational efficiency, expertise and carefully selected suppliers guarantee constant high quality products with a production process that meet the strictest environmental standards. ARCELORMITTAL RINGMILL (AMR) has become the leading supplier for a large international customer base through its know-how and dynamism. Its customers include the major world manufacturers of slewing rings and gear boxes. Railway tyres All types of railway tyre profiles, meeting the standards defined by the UIC code or custom specifications. Our tyres can be supplied rough or fully-machined and ready for assembly. Back to homepage ARCHITECTES ASSOCIES S.A. TECHNIQUES GENERALES & INFRASTRUCTURES S.A. Rue du Vieux Bac, 5 4140 SPRIMONT Tel: 32-(0)43822963 - Fax: 32-(0)43822964 Email: info.liege@aasa.be - info.liege@tgisa.be - Web: www.aasa.be Contact person: Mr Yves JACQUES The office of the associated Architects is specialized in the architecture and in the restoration of classified buildings. Back to homepage ARMONY CONCEPT Zone Industrielle Bonne Fortune - Rue de l'Informatique, 13 4460 GRACE HOLLOGNE Tel: 32-(0)43642888 - Fax: 32-(0)43642829 Email: info@armony.be – leonard.wintgens@armony.be - Web: www.armony.be Contact person: Mr Léonard WINTGENS For a lot of years already, ARMONY CONCEPT has been specialized in the field of signposting systems for shopping centers, department stores, public transport (railway stations, underground stations and airports), parking areas and prestige buildings. Back to homepage ART-CHI-MADE Place Didier, 24 - Boite 29 6700 ARLON Tel: 32-(0)63602724 - Fax: 32-(0)63602924 – Mobile: 32-(0)477698303 Email: art-chi-made@skynet.be - Web: www.art-chi-made.be Contact person: Mr Jean-François BAIWIR Architecture Back to homepage ARTEC-ARCHITECTURE Rue des Prés, 160/3 4841 HENRI-CHAPELLE Tel: 32-(0)87898000 - Fax: 32-(0)87898001 – Mobile: 32-(0)476427061 Email: info@artec-architecture.be - andre@artec-architecture.be Web: www.artec-architecture.be Contact person: Mr André HENKINBRANT Architecture Back to homepage ARTELUX Allée de la Picherotte, 28 4053 EMBOURG Tel: 32-(0)43651700 - Fax: 32-(0)43672707 – Mobile: 32-(0)475450540 Email: info@artelux.be - Web: www.artelux.be Contact person: Mr Raymond VANDENINDEN The company conceives, develops and markets complete solutions of dynamic display for: The welcome, the internal communication and the signaling system of the public and private organizations The outside communication of cities and municipalities (big screens), industrial and tertiary sites Back to homepage ASPEL GROUP Industriestrasse, 37 4700 EUPEN Tel: 32-(0)87595050 – Fax: 32-(0)87595060 Email: aspel@aspel-group.com - Web: www.aspel-group.com Contact person: Mr Alain WISLET ASPEL is a global group specialized in delivering added value with injection molding, secondary operations and services. Besides its worldwide manufacturing and engineering facilities ASPEL offers through extended partnerships and alliances a wider range of complementary manufacturing and logistics solutions. We are dedicated to help our global and local customers to reinforce their competitiveness and deployment of their own strategy. ASPEL provides well integrated solutions from the co-development over mold design and raw material expertise until the final delivery of products and services. ASPEL is cost oriented and guarantying the highest quality standards from the start of a project Products and Technology On more than 130 injection molding machines in the range of 15 to 440 tons we are specialized to produce small to medium sized, thin walled, complex and aspect parts with low tolerances. Our technology includes bi-injection (2K), gas injection, tandem molding and insert over molding. Most of our processes are highly automated. The ASPEL service portfolio also offers: Co-development / Part design optimization Mold design & manufacturing Other complementary operations as assembly or finishing Logistics supply chain management Consignment inventories Etc. Back to homepage AS RAIL Avenue de la Résistance, 15 4053 CHAUDFONTAINE Tel: 32-(0)43651792 - Mobile: 32-(0)475989828 Email: contact@asrail.be - albert.staffe@skynet.be - Web: www.asrail.be Contact person: Mr Albert STAFFE AS RAIL works especially in the following matters: signalling ergonomics in control rooms electrification (overhead and power supply sub-stations) audio-visual information to clientele and stations signs telecommunications but also in these matters: operating rules and systems, follow up and safety of traffic vocational training technical assistance in countries with difficult surroundings Back to homepage ASYMMETRIC ARCHITECTES ASSOCIES Rue Trémouroux, 9 1360 PERWEZ Tel: 32-(0)81834700 - Fax: 32-(0)81834200 – Mobile: 32-(0)479229867 Email: info@asymarch.be - lorenzo@asymarch.be - Web: www.asymarch.be Contact person: Mr Lorenzo RASCHELLA Architecture Back to homepage ATELIER D’ARCHITECTURE A2 Rue Lieutenant Pirard, 16 4607 DALHEM Tel: 32-(0)43796051 – Fax: 32-(0)43796151 - Mobile: 32-(0)474321287 Email: michaelperilleux@atelierdarchitecture.be –Web: www.atelierdarchitecture.be Contact person: Mr Michael PERILLEUX Architecture Back to homepage ATELIER D’ARCHITECTURE DANIEL DELGOFFE Rue du Nouveau Sart, 8 4050 CHAUDFONTAINE Tel: 32-(0)43687973 – Mobile: 32-(0)476419307 Email: daniel.delgoffe@hotmail.com - daniel.delgoffe@infonie.be Web: www.delgoffe-architecture.be Contact person: Mr Daniel DELGOFFE Architecture Back to homepage ATELIER D’ARCHITECTURE DDV Rue de Sotriamont, 24/1 1400 NIVELLES Tel: 32-(0)67216664 – Fax: 32-(0)67218602- Mobile: 32-(0)475413682 Email: contact@ddv-archi.com - jm.delsaut@ddv-archi.com –Web: www.ddv-archi.com Contact person: Mr Jean-Marie DELSAUT Architecture Back to homepage ATELIER D’ARCHITECTURE JOEL LOUIS Boulevard Piercot, 48/62 4000 LIEGE Tel: 32-(0)43224395 – Fax: 32-(0)43229383 - Mobile: 32-(0)495517314 Email: louis.joel@skynet.be Contact person: Mr Joel LOUIS Architecture Back to homepage ATELIER DE BASCOUP Rue d’Anderlues, 187 7160 CHAPELLE-LEZ-HERLAIMONT Tel: 32-(0)71603134 – Fax: 32-(0)71603220 – Mobile: 32-(0)478929924 Email: flavio.romiti@infrabel.be - frederic.delille@infrabel.be – Web: www.infrabel.be Contact persons: Mr Flavio ROMITI – Mr Frédéric DELILLE Created in 1912, the Workshop of Bascoup became a unique and major site of the Belgian railroad world! It is indeed the only workshop of Belgium to produce points, devices which so equip the entire network. Back to homepage ATELIERS DE CONSTRUCTION ELECTRIQUE INDUSTRIELLE ACEI Route de Philippeville, 170 6001 MARCINELLE Tel: 32-(0)71437824 – Fax: 32-(0)71476264 – Mobile: 32-(0)478749788 Email: contact@acei.be - guy.dehon@acei.be – Web: www.acei.be Contact person: Mr Guy DEHON ACEI is the perfect partner for the realization of your control panels and your energy installations. She specializes in installations of photovoltaic systems, both for individuals and for businesses. The company currently has approximately forty employees and is among others specialized in the rail industry and energy saving systems. The company is organized into three sections: The railway department: ACEI is actively involved with major clients in the integration of rail equipment cabinets for the rolling stock and signaling systems for ground equipment. ACEI also works well on its own production on the websites of its customers or on construction sites. The industrial department: ACEI offers power for industrial production, programming for implementation on the ground. Whether the automation of your machines or revamping of an old installation, the preferred partner of many well-known clients. Our expertise enables us to provide our customers with support in their performance; they are mining, steel, metal, glass or other. The energy-saving department: Since 2011, ACEI specializes in the world of renewable energy and produces photovoltaic system driver, ACEI operates as well as for residential installations for professional installations of up to 250 kW. ACEI performs for its clients cabinets necessary for decoupling power installations above 10kW. Back to homepage ATELIERS HUBERT GERKEN Zone Industrielle de Petit-Rechain - Avenue du Parc 41 4800 PETIT-RECHAIN Tel: 32-(0)87394900 – Fax: 32-(0)87310874 – Mobile: 32-(0)475234307 Email: info@gerken.be - pascal.gerken@gerken.be – Web: www.gerken.be Contact person: Mr Pascal GERKEN Welcome to GERKEN SA - the leading independent manufacturer in Europe of carbon brushes and other carbon and graphite products for railway traction, power generation and industry. Our range includes: Carbon Brushes Carbon Brush Holders Pantograph Carbons Traction Earthing Units Slip Rings Machined Graphite Components ....and many other related parts and services Back to homepage ATELIERS ROGER PONCIN ET CIE Grand’Rue, 76 4560 OCQUIER Tel: 32-(0)86344108 - Fax: 32-(0)86344934 Email: info@poncin-construct.be - f.poncin@poncin-construct.be Web: www.poncin-construct.be Contact person: Mr Francis PONCIN Works of engineering: bridges Steel structures Dressing of platform SNCB / TUC RAIL: Certification for the production of structures and steel bridges (Belgian railways). Back to homepage AUTOMATIC SYSTEMS Avenue Mercator, 5 1300 WAVRE Tel: 32-(0)10230211 - Fax: 32-(0)10230202 Email: asmail@automatic-systems.com - sdepaepe@automatic-systems.com Web: www.automatic-systems.com Contact person: Stéphane DE PAEPE Automatic Systems, a world leader in automated secure entrance control, has been designing and manufacturing pedestrian, vehicle and passenger access control equipment for over 40 years. There are currently more than 90 million daily users of Automatic Systems equipment in countries all around the world. Automatic Systems has built its reputation on rapid delivery of high-quality products and unrivalled customer service. Automatic Systems continuously strives to meet the needs of our clients and build long-lasting relationships. At Automatic Systems, we know that product customization and utilization of the latest technology are both key to designing high performance equipment adapted to the customer’s needs. Our engineers and technicians work every day to design, improve and adapt equipment to specific customer requirements, with a continual focus on mechanical design and detection. Passenger Products Automatic Systems is in a position to provide metro operators, major integrators and engineering companies with: A specific range of products for specialised applications, such as Public Transport, A high engineering content required to customize specific products, A project feasibility specifications and analysis, A specific detection control technology, A project management to provide services other than usual for installation and maintenance A complete range of highly reliable automatic access control gates designed for and to the specific needs of public transport customers. Able to integrate every kind of ticketing system, equipped with the latest communication modules, thus open to network with overall information systems. Back to homepage AVD BELGIUM Zone Industrielle Sud II - Rue du Bosquet, 35 1402 NIVELLES Tel: 32-(0)67493740 – Fax: 32-(0)67442534 Email: info@avd.be - d.timperman@avd.be - Web: www.avd.be Contact person: Mr Dirk TIMPERMAN AVD was established in 1982 by a group of engineers with more than 20 years’ experience in heavy industry and railway industry as one of our customers, you therefore stand to benefit from our extensive know how in research and retailing of in industrial drive components and of components and of composite insulation materials for electrical and thermal engineering and industrial plain bearings. Products: Couplings Composite materials Clutches and brakes Overhead crane components Industrial weighing Back to homepage BAGECI Parc Industriel - Rue des Pieds d'Alouette, 12 5100 NANINNE Tel: 32-(0)81407911 - Fax: 32-(0)81407924 Email: info@bageci.be - Web: www.bageci.be Contact person: Mr Patrick VERSWIJVEL CFE is a multidisciplinary group, active in the PPP-concessions, construction, real estate, multitechnical, rail & road, and marine engineering sectors. The group is located all over the world. The CFE group forms a coherent whole in which each division is supported by the others. The concessions and property development divisions award work to the general contracting companies, which in turn are potential customers of the companies making up the multitechnics division, which maintain the structures built under public private partnership contracts. Similarly, many of DEME's business lines tie in with the civil engineering activities carried out by CFE group companies. The number of examples of synergy among the various divisions is increasing and provides the group with development opportunities. CFE's leading historical trade is construction and the next is dredging and marine engineering. CFE holds 50% of DEME's capital, one of the worldwide leaders in this sector. The CFE group is listed in Euronext Brussels, and VINCI holds 47% of the capital. The Rail & Road division is one of the six business divisions of the CFE group, all active in Belgium or abroad. This division includes: Aannemingen Van Wellen (Road department), ENGEMA, ETEC, Remacom & Stevens. This division is specialized in: railway works : railway overhead lines signalization and track-laying works transport of energy : high and low voltage lines road and rail works asphalt works public lighting Back to homepage BAGETRA Rue Baudouin, 46 7080 EUGIES Tél.: 32-(0)65450630 - Fax : 32-(0)65666506 Email: bagetra@bagetra.be - gondry@bagetra.be – Web: www.bagetra.be Contact person: Mr Guy GONDRY The civil engineering The industrial construction BAGETRA realizes networks of draining’s and piping’s, water-treatment plants, civil engineering and sanitation works Back to homepage BARATTUCCI & ASSOCIES Rue du Cimetière, 55 6120 NALINNES Tel: 32-(0)71216577 - Fax: 32-(0)71220223 - Mobile: 32-(0)478962798 Email: archi@barattucci.com - Web: www.barattucci.com Contact person: Mr Marcel BARATTUCCI Architecture Back to homepage BELGCAST Zoning Industriel 4870 TROOZ Tel: 32-(0)43517431 - Fax: 32-(0)43517769 Email: info@belgcast.be - eric.vancutsem@belgcast.be- Web: www.belgcast.be Contact person: Eric VANCUTSEM Between the region of Liege and the non-ferrous metals there is a long history which made some large companies famous around the world. The company, which today is called BELGCAST and manages downstream operations, has acquired with the passing years mastery of the non-ferrous metal manufacturing. The fidelity of its clients beyond generations of men is the proof of a thorough expertise in die casting of aluminium and Zamak. The long experience of its qualified workforce and the investment in techniques has made BELGCAST a leader of the castings market, from the smallest to the biggest one. Back to homepage BELGIUM COATINGS Rue des Nouvelles Technologies, 4 4460 GRACE-HOLLOGNE Tel: 32-(0)42390440 - Fax: 32-(0)42390770 Email: o.roland@belgium-coatings.be - Web: www.belgium-coatings.be Contact person: Olivier ROLAND Activities/products Sandblasting, metallization and application of all kinds of liquid paints Powder coating, series (0.800x6000x2000) and larger pieces (12000x3000x3000) Work is done in our own plant (Steel-Alu-Galva-Font). The company is also involved in paintings on industrial sites (intumescing, final applications, etc…). This work is carried out on site. Building construction: all paintwork, facades, anti-graffiti, final layer application and paint for interior finishing. This all happens on site. Key markets Urban Furniture, furniture especially employed in the railway industry, lighting, access ,safety railings, balconies, acoustic panels, solar panels, barriers, fences, art ironwork, silos, locksmiths, automotive equipment and all kinds of metal constructions. References JCD, KAD, MICE, RER, SNCB, SNCF, CFL, STIB, RATP, CMI, ArcelorMittal, JAC, Remico, Jemco, St.Gobain, Meunier Group, Mecanicsystems, Lindab, NCC, Viry, BAM, Poncin, Arendt, Bemelmans, Galvapower, etc. Certifications ACQPA, AVIMET, FMB, QUALITYSTEELCOAT… Back to homepage BELGORAIL Rue Ravenstein, 60/7 1000 BRUXELLES Tel: 32-(0)25483763 - Fax: 32-(0)25485331 Email: info@belgorail.be – Web: www.belgorail.be Contact person: Mr Jean-Marc DUPAS Belgorail, a legal entity established under the Belgian law, is a railway verification, testing and certification body created in June 2004 by Vinçotte, (inspection and certification company), Transurb Technirail (railway engineering company) and Agoria. Since its creation in June 2004, the company BELGORAIL has enjoyed rapid growth. It has been awarded the status of notified body within the framework of the interoperability directive (2008/57/EC) and is active in several European countries as well as on an international level for inspections, audits, safety studies (including risk management methods), product certification, ECM Certification and services in the rail transport sector. Activities: Certification Body in the field of railway and urban transport system: Notified Body n° 1615 for railway interoperability directive 2008/57/CE Designated Body in Belgium, Luxembourg, France, Spain and Algeria (Assessment of conformity of systems or products in accordance with the national technical and safety rules) Test organization on the Belgian and Luxembourg Railway Infrastructure Independent Safety Assessor (ISA, standards EN50126, EN 5018 and EN 50129) Independent Assessor (CSM – risk evaluation) Certification of ECM and maintenance workshop Conformity assessment in case of voluntary verification. Back to homepage BERVAES ET FILS Rue Grétry, 179 4020 LIEGE Tel: 32-(0)43435426 - Fax: 32-(0)43417198 - Mobile: 32-(0)479639183 Email: bervaes.liege@skynet.be - Web: www.bervaes.be Contact person: Mr Michel BERVAES Winding: components for engines, transformers, drivers, equipment Electrical and thermal insulators Equipment of electric installation Adhesives Electronic connections and protection ESD Back to homepage BESIX Avenue des Communautés, 100 1200 BRUXELLES Tel: 32-(0)24026211 - Fax: 32-(0)24026200 Email: communication@besix.com - ddamseaux@besix.com - Web: www.besix.com Contact person: Mr Didier DAMSEAUX BESIX Group is the largest Belgian group, operating in the construction of buildings, infrastructure, environmental projects and roads. BESIX is also active in the production of raw materials, facility management, real estate development and concessions. It profiles itself as a multi-services group, from client idea to realization and operation. The Group was founded in 1909 and has grown steadily and impressively ever since. Back to homepage BFB OIL RESEARCH Parc Créalys - Rue Phocas Lejeune, 10 5032 ISNES Tel: 32-(0)81585300 - Fax: 32-(0)81585308 Email: info@bfblab.com - vincent.bouillon@bfblab.com - Web: www.bfblab.com Contact person: Mr Vincent BOUILLON BFB offers its specialised analytical services to quality control, conformity to specifications: fuel (EN 228) gasoline (EN 590) biodiesel (EN 14214) heating fuel (NBN T-52-716) antifreeze (NF R 15-601, BS 6580, ASTM 3306) hydraulic oils (ISO 15380) turbine oils (ISO 8068) cutting oils (CNOMO) … research, characterisation and performances environmental impact predictive maintenance With more than 15 years’ experience in industrial, petrochemical and oleo chemical fields, equipped with the leading edge of technology in a scientific environment and considering quality as our driving force, BFB laboratory commits to: • perform a qualified and reliable work • meet its customers’ requirements • advise from its experience • be flexible and reactive • ensure confidentiality Back to homepage BIZZDEV Chaussée d'Antoing, 55 7500 TOURNAI Tel: 32-(0)69669510 - Fax: 32-(0)69669545 Email: abu@bizzdev.com - Web: www.bizzdev.com Contact person: Mr Aurélien BURETTE BIZZDEV is a Belgian company specialized in mobile technologies. Founded in 1999, BIZZDEV has experienced a quick growth and is now represented in Belgium and France. With more than 10 years of experience, BIZZDEV has innovated to remain the technological leader both in the development of software applications for mobility and in the development of application interfaces. BIZZDEV has mainly focused on the improvement of its competences in mobility. We deploy your tools and know-how on the field. Our expertise enables us to adapt the companies' existing infrastructures to their new coming needs. BIZZDEV aspires to supply companies with technological, sustainable, innovative, high value-added solutions to help them reach their objectives. Our goal is to be and to remain a durable supplier of technological, innovative and highquality mobile solutions for the public sector, common carriers and companies including the consultancy, implementation and maintenance services for our partners. Today, BIZZDEV runs its activities from its headquarters in Tournai (Belgium), employing 35 dynamic persons. Its experts have specialized in the conception and implementation of client/server solutions based upon the Web technology. The software’s developed can be used in many situations, from the distance, with a dynamic update of the data for all users. They adapt automatically to work tools like PCs, Pocket PCs, Tablet PCs, Smart Phones and PDAs… BIZZDEV develops its products and services for companies (B2B) and for the public sector. We work for various sectors such as the pharmaceutical industry, food industry, medicines, common carriers, civil engineering, government, energy... Back to homepage BKE-MACHINES INTERNATIONAL Rue Raphaël, 17-C 5060 FALISOLLE Tel: 32-(0)71260180 - Fax: 32-(0)71260189 - Mobile: 32-(0)477336964 Email: info@bke-machines.com - Web: www.bke-machines.com Contact person: Mr Pierre VANDEVELDE Equipment for railway industry Back to homepage BRUNO ALBERT ARCHITECTE ET ASSOCIES Mont Saint-Martin, 7 4000 LIEGE Tel: 32-(0)42236356 - Fax: 32-(0)42229016 Email: atelier@brunoalbert.be - Web: www.brunoalbert.be Contact person: Mr Bruno ALBERT Architecture and design Back to homepage BTCI Parc Paysager de Tyberchamps, 1 7180 SENEFFE Tel: 32-(0)64443063 - Fax: 32-(0)64443066 - Mobile: 32-(0)483467410 Email: info@btci.be - Web: www.btci.be Contact person: Mr Bruno BORTOLIERO The workshops of BTCI offer producing and reconditioning of complete elements, unit pieces and small series. Our production guarantees satisfaction of the most exigent industrial customers. We offer not only a robust infrastructure sufficient to accommodate most of the orders, but also the flexibility and promptness of SMEs. We have oriented our investments towards CNC workshop machinery of large capacities in order to work with pieces of significant dimensions and weights. (Lifting capacities: 40 tones). To provide our customers with a complete service respecting the deadlines, we have expanded our investments and competences stepping beyond the scope of machining that permits us taking in charge full realizations including not only different fields of machining but also mechanical welding, mechanic construction, finishing, etc. We also have engineering department at your disposition. Back to homepage BUREAU D'ARCHITECTURE GREISCH Parc Industriel des Hauts-Sarts - 1ère Avenue, 165 4040 HERSTAL Tel: 32-(0)43661402 - Fax: 32-(0)43661401 - Mobile: 32-(0)475245044 Email: info@bagreisch.be - philippe.greisch@bagreisch.be - Web: www.bagreisch.be Contact person: Mr Philippe GREISCH Architecture and design Back to homepage Sensorio, Division of BEA BUREAU D’ELECTRONIQUE APPLIQUEE BEA Allée des Noisetiers, 5 4031 ANGLEUR Tel: 32-(0)43616565 - Fax: 32-(0)43612858 - Mobile: 32-(0)486133748 Email: info@bea.be - Web: www.bea.be Contact person: Mr Valentin NOVAKOVIC BEA, founded in Belgium in 1965, has over 400 employees around the globe. A pioneer in the sensor industry, BEA was one of the first companies to launch Doppler microwave radar specially adapted for automatic doors opening. The BEA headquarters located near Liège designs produces and distributes their products in Europe. They also drive the Company’s global strategy, active worldwide through their subsidiaries in the United States, China, Brazil and Japan. Since 2002, BEA has been a member of the British HALMA Group, which includes 50 companies around the world designing, producing and marketing products for the safety of public and industrial automatic installations. The Sensorio division of BEA was set up to broaden the fields of application of its technologies through market diversification, and to make its expertise available to other parties involved in various new markets. At BEA Sensorio, the employees and management team combine experience and know-how in a way that ensures clients get the right solution to meet all their sensor needs. BEA Sensorio offers a complete range of infrared optical, radar and time of flight LZR® based sensors, and these are divided across several market sectors, one of which is Railways and Public Transport in general. In this area, BEA Sensorio products are available for interior doors, exterior doors, platform screen doors and other similar applications in Public Transport. Back to homepage BUREAU D’ETUDES ATELIER 5 SA Rue du Haut Cortil, 1/26 5190 JEMEPPE SUR SAMBRE Tel: 32-(0)71786868 - Fax: 32-(0)71784513 Email: info@ateliercinq.be - Web: www.ateliercinq.be Contact persons: Mr Jean Pol GREGOIRE - Mr Martin GREGOIRE Architecture and Design Back to homepage BUREAU D’ETUDES JASON BEJ Rue de la Digue, 15 4032 CHENEE Tel: 32-(0)43653546 - Fax: 32-(0)43661476 – Mobile: 32-(0)485507131 Email: fj@bureau-etudes.be - Web: www.bureau-etudes.be Contact person: Mr François JASON With the experience gained on different projects and over time, the BUREAU D’ETUDES JASON has studied the stability of variable geometry projects, and today is as likely to work with steel as with concrete or wood... With individual clients, architects, construction companies, real estate developers, industry, public services and municipal technical departments. To complete housing projects or apartment buildings, industrial complexes, shopping centres, mobile phone antennae, works of art or civil engineering. While respecting the discretion each project deserves, we have provided a few words about each one under the “References” tab, to give you an idea about their context, environment and progress. Back to homepage BUREAU D’ETUDES PIERRE BERGER Voie de l'Air Pur, 6 4052 BEAUFAYS Tel: 32-(0)43685060 - Fax: 32-(0)43685062 – Mobile: 32-(0)477513969 Email: vbe@pierreberger.com - Web: www.pierreberger.com Contact person: Mr Vincent BERGER The Pierre BERGER office is an “ engineering consultant ” specialising in the following areas: Technical building equipment Engineering Project advice and management Energy audit and expertise Back to homepage BUREAU D'ETUDES PIRNAY Rue du Parc, 47 6000 CHARLEROI Tel: 32-(0)71330449 - Fax: 32-(0)71330258 – Mobile: 32-(0)495291842 Email: pirnay.sa@skynet.be - js.pirnay@bepirnay.be - Web: www.bepirnay.be Contact person: Mr Jean-Sébastien PIRNAY Office of studies in stability Back to homepage BUREAU MERTENS Rue du Culot, 15 A 1341 CEROUX-MOUSTY Tel: 32-(0)10614049 - Fax: 32-(0)10616948 Email: info@bureau-mertens.be - Web: www.bureau-mertens.be Contact person: Mr Bernard MERTENS Our dynamism, high quality services and products are the keys of more than 40 years of success. Engineering solutions Thanks to our experience and creativity, we are able to study “tailor-made” solutions, adequate and economically profitable. Some examples: Re-manufacturing old spare parts for African railways Re-design of rotary dampers for Mauritanian coaches Design and supply of 400 bogies for Snim 100T iron wagons (Mauritania) DUREL We design elastomer compression springs, those are sold under registered trademark DUREL®. Production and sales are made by our German licensee company, DUREL GMBH. Patented compression springs are approved by many railway networks worldwide. Agency services for renowned European companies We are specialized in the supply of railway equipment’s to Africa. We work directly with national railways companies or through international tenders financed by BM, BEI, CE, BAD... Back to homepage CAPAUL Industriestrasse, 39 4700 EUPEN Tel: 32-(0)87595560 - Fax: 32-(0)87740468 Email: info@capaul.be - Web: www.capaul.be Contact person: Mr Alexander FICKERS Our dynamism, high quality services and products are the keys of more than 40 years of success. Railway industries High precision components for the most different types of railway vehicles, the highest accuracy and a profound technical know-how; those are the major strengths by which we are particularly distinguished. CAPAUL is specialized in machining of high precision mechanical components. Our modern machine park offers special possibilities for applications in the field of railway industries: CNC turning on 2 to 5 axis Turn-Mill Centers up to Ø 1250 mm 3, 4 & 5 axis machining on Vertical Centers (pallet & pendular machining) up to 1250x1000x1000 mm Machining on Horizontal Centers (pallet machining) up to 500x500x500 mm Broaching (turbine disk slots) Hard Turning in air-conditioned environment up to Ø 420 mm EDM machining Complete integration of subassemblies (CFM56) References Our high technology production plants turn, mill, grind, erode and control your pieces according to your specifications. Back to homepage CARLOR ENGINEERING Avenue Albert 1er, 87 4030 GRIVEGNEE Tel: 32-(0)43840197 - Fax: 32-(0)43671666 – Mobile: 32-(0)485415012 Email: info@carlor.com - fabian.klaurens@carlor.com - Web: www.carlor.com Contact person: Mr Fabian KLAURENS CARLOR: the leader in the field of preheating systems for engines and drinking bowl heaters! CARLOR ENGINEERING is a Belgian manufacturer of: electric coolant heaters for all types of water-cooled engines generator sets, vans, trucks, bus, civil engineering machineries, marine engine, private cars, emergency vehicles, vehicles on construction site, hydraulic oil preheater water preheating system for drinking bowls Locomotives CARLOR regularly contributes to modernisation projects for locomotives. Drastic energy-saving targets are placed on the front line and can be achieved partially thanks to the use of CARLOR preheaters. Back to homepage CMGC - MATLOC Impasse de Prevôchamps, 4 4860 PEPINSTER Tel: 32-(0)87376114 – Fax: 32-(0)87377769 – Mobile: 32-(0)476976380 Email: info@cmgc.be - bernard.magdalena@cmgc.be - info@matloc.be Web: www.cmgc.be - www.matloc.be Contact person: Mr Bernard MAGDALENA CMGC – MATLOC is a company active in the sale and rental, repair of equipment. Description of our range in a few words: Machinery (excavator, mini excavator, loader, roller, dump, platform), machinery accessories (Rock breaker, bucket grabs, rubber or metal tracks), compaction equipment vibration plate until 900kg , accessories lifting and handling (chains, straps clip) , measuring tools (lasers), pallets and retention tanks for hydrocarbon, generator to 400KVA, diamond tools and many other things. We invite you to visit our website to view our wide range of products and services by clicking on the link: www.cmgc.be or www.matloc.be The seriousness of our company has enabled us to build strong relationships with our suppliers. Our material comes directly from the manufacturers, which ensures attractive prices and best after-sales service. CMGC is also responsible for selling your used equipment. Our technical department can help you for your equipment: maintenance, welding, hydraulic troubleshooting on site and workshop. Do not hesitate to contact us for more information. Back to homepage CMI (Headquarters) Avenue Greiner, 1 4100 SERAING Tel: 32-(0)43302243 - Fax: 32-(0)43302582 Email: welcome@cmigroupe.com - Web: www.cmigroupe.com CMI Locos Diesel (Locos) Avenue Greiner, 1 4100 SERAING Tel: 32-(0)43302433 - Fax: 32-(0)43302545 Email: services.rail@cmigroupe.com - Web: www.cmigroupe.com/en/p/cmi-locos-diesel CMI Locos Diesel (Diesel) Avenue Greiner, 1 4100 SERAING Tel: 32-(0)43302482 – Fax: 32-(0)43302465 Email: cockerill.engine@cmigroupe.com Web: www.cmigroupe.com/en/p/cmi-locos-diesel CMI Traction Avenue Léon Champagne, 2 1480 TUBIZE Tel: 32-(0)64521631 – Fax: 32-(0)64521631 Email: traction@cmigroupe.com - - Web: www.cmigroupe.com/en/p/cmi-traction CMI Locos Diesel A pioneer in locomotives, CMI Locos Diesel offers a wide range of new shunting locomotives. They are particularly well suited to pulling heavy trains on industrial sites. They also respond perfectly to the needs of railway and urban transport operators. CMI Locos Diesel also provides maintenance services and the modernisation of shunting locomotives. On top of this, as the original manufacturer of Cockerill Diesel engines, CMI Locos Diesel caries out all of the after-sales services for these (maintenance, analysis, technical advice and training) and supplies all of the spare parts for Cockerill Diesel engines. Thousands of shunting locomotives and Cockerill Diesel engines designed by CMI are currently operating in the four corners of the world. They are used by industrial clients active in steelmaking, chemicals, cement, paper etc… CMI locomotives are accredited by many railway operators including the SNCB (Belgium), SNCF (France) and CFL (Luxembourg). CMI Locos Diesel stands for: More than 175 years of experience in the rail traction domain; A guarantee of quality equipment, robust and respectful of the environment and meeting UIC, AAR, CEI and EN norms; The possibility of modernising and renovating old locomotives; A wide range of services: from locomotive rental to maintenance, not forgetting the supply of spare parts and 24 hour 7 day interventions with a high quality after sales service. The only official distributor in the world of Cockerill Diesel engine spare parts. CMI Locos Diesel is based in Seraing (Liège region, Belgium). Its activities date back to 1835, the time when the first steam locomotive rolled out of the John Cockerill workshops. Relative Products and Services Equipment Services Shunting locomotives Renting and maintenance of shunting locomotives General rolling stock maintenance Railway services Engineering Technical visits to rail convoys Components & Sub-Assemblies Spare parts and specific tools After Sales services and spare parts for Cockerill Diesel engines CMI Traction specialises in railway traction and maintenance. Its services extend from out-sourced traction work to repair and technical checks on wagons, not forgetting the driving of locomotives by remote controlling, repairs to the rails, and on the ground services for rail operators, along with repairs to gantries crane. Located at Tubize close to Brussels (Belgium), CMI Traction targets a Belgian, French and Dutch clientele. CMI Traction stands for: 15 years of experience Quality service delivery A 1,000 m² workshop Conformity with VCA norms. Having joined the CMI Group in 1998, CMI Traction now employs around forty persons. Relative Products and Services Services Out-sourced traction General rolling stock maintenance Railway services Technical visits to rail convoys Back to homepage CML INDUSTRIES Rue Fonteny Maroy, 61 6800 LIBRAMONT Tel: 32-(0)61223633 - Fax: 32-(0)61225653 Email: cml@cmlindustries.be - Web: www.cmlindustries.be Contact person: Mr Eric POUSSEUR Equipment and accessory for railway vehicle Conception of custom-made machines for the rail Back to homepage COFELY FABRICOM Chaussée de Fleurus, 263 6220 FLEURUS Tel: 32-(0)61223633 - Fax: 32-(0)61225653 – Mobile: 32-(0)477334436 Email: info@cofelyfabricom-gdfsuez.com - luc.tambuyser@cofelyfabricom-gdfsuez.com Web: www.cofelyfabricom-gdfsuez.com Contact person: Mr Luc TAMBUYSER COFELY FABRICOM boasts over 60 years of experience and specialized installations know-how in Electrical & Instrumentation, Piping & Mechanical and Automation & Process Control. Infrastructure Efficient and sustainable transport and mobility is the focal point of many governments and local authorities. As populations increase, so does congestion at our railways, roads, waterways and airports. To provide citizens with better mobility, public safety and security, and higher levels of convenience and comfort, COFELY FABRICOM develops and installs automation and surveillance systems to streamline conditions for all transport modes. High voltage electricity distribution has been a core competency of COFELY FABRICOM from the outset. Over the years we have accumulated further expertise in the distribution of media such as television and internet, gas and water. The size and time frame of many infrastructure projects imply a specialized approach. COFELY FABRICOM boasts a vast experience in private-public-partnerships (PPPs) to ensure long-term maintenance and financing. Back to homepage COLAS RAIL Rue des Ateliers, 3 7850 ENGHIEN Tel: 32-(0)23970022 - Fax: 32-(0)23955538 Email: info@colasrail.be - Web: www.colasrail.com Contact person: Mr Bernard DENONCIN Colas Rail is the leading company in the French market for railway construction and maintenance. It is also a European and International leader in the design, construction and maintenance of rail and guided-transport infrastructure. We play an active role in developing projects in the following areas: Permanent Way (slab track and ballasted), Electrification (sub-stations, overhead lines), Signalling, Control, Communications, Electrical and Power systems. This allows for the perfect integration of a complex transport system. Our areas of competence cover all types of rail transport, from tramways to high-speed lines. Back to homepage COLASSE Rue Puits-Marie, 79 4100 SERAING Tel: 32-(0)42252589 - Fax: 32-(0)43651376 – Mobile: 32-(0)495999713 Email: info@colasse.be - manuel@colasse.be - Web: www.colasse.be Contact person: Mr Manuel COLASSE COLASSE designs, manufactures and distributes led displays and led lighting for home, commercial, industrial and horticultural applications. COLASSE: Sustainable Development through Innovations and Technologies Our products and services: LED Displays LED Lighting Special Lighting > Grow Lights Back to homepage COONEN GRAPHICS Parc Industriel 4800 VERVIERS Tel: 32-(0)87338944 - Fax: 32-(0)87312939 – Mobile: 32-(0)496507551 Email: info@coonen.net - jp.schyns@coonen.net - Web: www.coonen.net Contact person: Mr Jean-Paul SCHYNS For well over 40 years now, our company has been specialising in industrial signs and advertising solutions. COONEN GRAPHICS employs a highly skilled team of more than 20 people. Aside from printing canvas, panels, signs and stickers in every size imaginable we also specialise in vehicle, stand and shop-window graphics. Furthermore, we can provide you with a whole range of in-house anodised aluminium products (anodization – industrial plates – display panels). Back to homepage CREER RENOVER CONSTRUIRE CRC Route Charlemagne, 25 5660 COUVIN Tel: 32-(0)60346730 - Fax: 32-(0)60347688 Email: info@crc-sa.be - Web: www.crc-sa.be Contact person: Mr Sylvain HOSTAUX CRC guides you through your building projects. We provide you a global solution adapted to your needs in: Construction of industrialized buildings Construction of offices Extension or transformation of commercial or industrial buildings Construction or renovation of public buildings We are operational at short notice. We can carry out all your projects. Back to homepage CSE SAMAPHORE BELGIUM Drève Richelle, 161 1410 WATERLOO Tel: 32-(0)23874259 - Fax: 32-(0)23874275 – Mobile: 32-(0)473177874 Email: philippea@cse-semaphore.com - Web: www.cse-semaphore.com Contact person: Mr Philippe ARETZ Transportation A Kingfisher or TBox telecontrol system is in use throughout the world in a variety of transportation industry applications. Our solutions cover a wide variety of measurement and control systems in airports, highways and railways: Aerobridge monitoring and control Electrical supply and isolation control Fuel storage monitoring and distribution control Heating control Rail positioning and safety monitoring Signal light monitoring Storm water monitoring and control Traction control/rail electrification Tunnel lighting control Key Semaphore telecontrol system features for the transportation industries include: Wide temperature range/outdoor environment operation Local alarm management and data logging Sequence of events (SOE) monitoring Redundant configurations to provide high availability Open programming tools to reduce project implementation times and scheduling risks for systems integrators Back to homepage DAXI Zone Industrielle - 2ème Rue, 20 6040 JUMET Tel: 32-(0)71372220 - Fax: 32-(0)71373945 Email: info@daxi.be - Web: www.daxi.be Contact person: Mr Jean-Pierre DE ZUTTER For more than 20 years, DAXI has offered various services and produced; generally in keeping with the railway material but also the realization of tack welded parts and machined parts proposes. In the railway field, the company takes care of studies undertaken by qualified and experienced engineers. This first stage is elaborate in order to adapt industrial rolling stock or the material of way. Each analysis is dictated by the specific needs of its customers. The scopes of application are very vast. It is as well the setting in conformity of a coach to the particular standards of a country, as to make compatible the system of coupling of an engine. DAXI also specialized in the trade of new or reconditioned railway material; rails, crosspieces, shuntings, stops, level crossings, rail tankers, industrial coaches specific, metal ballastiers, railway bridges, etc… or quite simply of the spare parts for these various types of coaches. Lastly, the company carries out to measure of the forgings, the tack welded parts, the machined parts that it is for the repair of machines or the realization of more important parts such as bridges or supports rolling mills. The services and products are addressed to the railway network, trams, but also with heavy industry, ports, zonings, connections particular… The quality of the work provided by the engineers of the team and the philosophy resolutely directed towards the satisfaction of the customers led the company DAXI to develop as well on the local market as on the international market. Rolling Stock Trade of new material and secondhand reconditioned material Subsets and spare parts Compliance Direct delivery to customer Goods wagons, industrial wagons, Hopper Dozator wagons, wagons for the transportation of ores and coals, tankers, platform wagons, bogies, wheels, distributors, tensioners, brackets... Locomotives and shunting locomotives Track Material Trade of new material and secondhand reconditioned material Subsets and spare parts Improvement and adjustment Rails, sleepers, fastenings, buffer stops, rail clamps, bolts, sleeper screws, wood pieces, "vignole" stock rails, grooved rails, travelling crane rails Bending Rails machining and manufacturing of special pieces Expending machines Connections Trade of new material and secondhand reconditioned material Spare parts Improvement and adjustment Track connections Tramways connections Gathered frogs Frogs cast in one piece Recharging Thermic treatment Manual and electrical switch operating boxes Industrial Material Mechanical sets Boiler works Manufactured pieces Studies Back to homepage DECOLTAFRAMO Rue Lumsonry, 16 5651 TARCIENNE Tel: 32-(0)71228884 - Fax: 32-(0)71228666 Email: decoltaframo@skynet.be - Web: www.decoltaframo.com Contact person: Mr Gilles MONNOYER DECOLTAFRAMO is your partner, satisfying a wide range of industrial needs combining a multiplicity of technologies. Discover some of our products in a wide range of materials (steel, stainless steel, titanium, brass, nylon, abs...) Sectors: Railway Screws with notches in A2 type SNCF, screw without head used in train seats. Back to homepage DELAUNOIT GROUP Rue du Berlaimont, 35 6220 FLEURUS Tel: 32-(0)71309060 - Fax: 32-(0)71320484 – Mobile: 32-(0)493793208 Email: jacques.delaunoit@delaunoit.be – Web: www.delaunoit.com Contact person: Mr Jacques DELAUNOIT At the service of industry since 1921 in the petrochemical, chemical, steelmaking, automobile and printing sectors, nuclear and conventional power stations, and all general contracting for metal construction and assembly • • • • • • Distribution centre for lifting products: hoists, winches, lifting jacks, outrigger cranes, straps, slings, steel cables, chains. Approved and reputable general metal construction contractor. Working in the field of design, construction, assembly and after-sales service of lifting equipment such as: Travelling cranes, davit arms, monorails, lifting beams, gantries, roller conveyors, special lifting equipment. Repair, transformation and acceptance workshop for the approval of products by official organisations, a quality service that complies with EC standards, General, mechanical, hydraulic, pneumatic and electrical maintenance. 24h/24h breakdown service for all lifting machinery. Official dealer for products from KULI, Hadef and ACI for BENELUX A dynamic team at your service for the servicing, repair, modernisation or construction of travelling cranes, hoists, gantries, monorails, davits, etc. Back to homepage DHERTE Rue Lieutenant Cotton, 15 7880 FLOBECQ Tel: 32-(0)68446767 - Fax: 32-(0)68446768 Email: info@dherte.be - Web: www.dherte.be Contact person: Mr Jean-Claude DHERTE General company of constructions Civil engineering Back to homepage DUCHENE Route de Strée, 44 4577 MODAVE Tel: 32-(0)85510111 - Fax: 32-(0)85511040 Email: info@duchene.eiffage.be - Web: www.duchene-sa.be Contact person: Mr Gilles MONNOYER General company of constructions Civil engineering Railway tunnel Electrification of railroad Back to homepage DURANT FRERES ETS Rue Parmentier, 35 7100 LA LOUVIERE Tel: 32-(0)64221452 - Fax: 32-(0)64224968 Email: sa.durant.meca@skynet.be Contact person: Mr Stéphane DURANT Parts for locomotives, cars (bolts) Back to homepage ELLYPS Rue de la Pavée, 5/3 5100 NAMUR Tel: 32-(0)81200611 - Fax: 32-(0)81200662 – Mobile: 32-(0)496700310 Email: fle@ellyps.com - Web: www.ellyps.com Contact person: Mr Frédéric LEMAIRE Architecture, design, engineering Back to homepage EUTRONIX Avenue Zénobe Gramme, 29 1300 WAVRE Tel: 32-(0)10394900 - Fax: 32-(0)10394901 Email: info@eutronix.be - dverstraeten@eutronix.be – Web: www.eutronix.eu Contact person: Mr Denis VERSTRAETEN We provide hardware devices, technical support and integration solutions for passenger ticketing and access control applications. Solutions include, printing on various media, encoding of contact or contact less PVC cards, paper tickets and the use of eID cards. The visitors can be controlled using fixed or mobile devices, with technologies such as 2D barcode imaging, NFC, Mifare & Calypso proximity or contact chip cards. We offer solutions to quickly print and personalize PVC passes, including card holder picture. Our solutions simplify the ticketing process, speed up passenger access, improve the security and help eliminate waiting queues at peak time. Back to homepage EWON Avenue Robert Schuman, 32 1400 NIVELLES Tel: 32-(0)67895800 - Fax: 32-(0)67709100 – Mobile: 32-(0)477644223 Email: info@ewon.biz - sbm@ewon.biz – Web: www.ewon.biz Contact person: Mr Serge BASSEM EWON is an innovative Belgian manufacturer of products that offer secure industrial connectivity across the Internet. Over the last 10 years, EWON has become a worldwide market leader for intelligent Internet remote access routers for PLCs and automation systems. With its leading-edge expertise, knowledge and know-how in the industrial remote access market, EWON distinguishes itself by its innovation, passion, integrity, quality and long-term vision. Back to homepage FABRIRESSORT Avenue Lavoisier, 35 1300 WAVRE Tel: 32-(0)10229800 - Fax: 32-(0)10229898 Email: info@fabriressort.be - ka@fabriressort.be - Web: www.fabriressort.be Contact person: Mrs. Karin ANTOINE Since 1930, FABRIRESSORT designs, models and produces all types of springs. Prototype or million parts: each order is treated with the same love of the trade. Our workmen are craftsmen trained in the house. They are broken with the secrecies of the shaping and the production on a large scale. Here an outline of the various applications in which the spring plays a discrete but essential part. Public, private and industrial lightning Farming and gardening machines Public transportation (coaches, tramways, trains) Locks industry Computer and office equipment Auditorium lightning Optical industry Building industry (clips, fixation for cladding, ceiling…) Household appliance Electricity (contactors, switches…) Electronic industry (protections) Medical material, pharmaceutical industry Automotive (clips for engine parts, air filters…) Machine tools Back to homepage FEKA Rodter Straße, 112 4780 SAINT VITH Tel: 32-(0)80280830 - Fax: 32-(0)80280840 Email: info@feka.be - Web: www.feka.be Contact person: Mr Christoph GENTGES FEKA, partner for handycraft and industry Since 1936 FEKA is a reliable partner for the delivery of power transmission parts, tools and industrial supplies. Our customers are large production companies as well as small companies. Our mechanical workshop produces, adapts, maintains and repairs machines and mechanical components. We help small businesses and large companies to optimize production processes and keep production running. Many technical convenience goods are in stock, also products with little demand or hard to find. Back to homepage FRANKI Parc artisanal des Cahottes - Chemin des Moissons, 10 4400 FLEMALLE Tel: 32-(0)42505150 - Fax: 32-(0)42505351 – Mobile: 32-(0)478759395 Email: info@franki.be - ppvi@franki.be - Web: www.franki.be Contact person: Mr Pierre-Philippe VAN INNIS The FRANKI company is active in the sector of the construction and the renovation of buildings as well as in the works of civil engineering Back to homepage GALERE Rue Joseph Dupont, 73 4053 CHAUDFONTAINE Tel: 32-(0)43666750 - Fax: 32-(0)43666736 – Mobile: 32-(0)477620815 Email: s.libert@galere.be - Web: www.galere.be Contact person: Mr Simon LIBERT The Civil Engineering department Over the last 60 years, GALÈRE has established itself as a key actor in the implementation of all kind of civil engineering techniques Micro tunneling sector The Civil Engineering Department includes a sector specialising in micro tunneling, or laying pipes without using trenches. At the very forefront of technology, our department is able to produce micro tunnels with an interior diameter ranging from 600mm to more than 3.000mm for all types of pipes (concrete, PRP, steel, cast iron, stoneware etc.) and with lengths of up to 800m in one section. The micro tunneling sector owns several micro tunnel boring machines of the type made by Herrenknecht and can drill tunnels in all types of ground and at any depth. The level of precision achieved by laying pipes using micro tunnel technology is centimetric. We have a dynamic team of qualified engineers available for any type of project study in all countries of the world. It draws its expertise from the FFK company, which was a subsidiary company of GALÈRE and today part of the Civil Engineering department, with over 30 years’ experience in micro tunneling and solid references in underground Works. Back to homepage GALVAMETAUX Rue Waloppe, 19 A 4540 AMPSIN Tel: 32-(0)85311326 - Fax: 32-(0)85314128 Email: info@galvametaux.com - lucgregoire@galvametaux.com Web: www.galvametaux.com Contact person: Mr Luc GREGOIRE We can coat parts: Of between 100 gr and 20 kg in weight Of 8 to 50 mm in diameter Up to 700 mm long Range of applications Manifold applications of the hot dip galvanization: Building trade: footbridges, balustrades, metallic frame, concrete-iron, decoration… Urban applications: safety rails, lightposte, iron gates… Energy: high voltage towers, cables-ladder… Agriculture and horticulture: greenhouses, iron railing, fences, grain-dryer, liquid manure barrels… Transport: railways, motor vehicles. GALVAMÉTAUX is particularly specialised in small parts above all in fixing devices such as: rail bolts, screws, nuts, sleeper screws, shackles, roofing hooks, flanges, clips … Back to homepage GANTREX Rue du Commerce, 19 1400 NIVELLES Tel: 32-(0)67888030 - Fax: 32-(0)67216321 – Mobile: 32-(0)473933529 Email: info@be.gantry.com - therese.grzeskowiak@be.gantry.com Web: www.gantrex.be Contact person: Mrs. Thérèse GRZESKOWIAK Worldwide Leader GANTREX® and the Gantry Group are the world’s leader in crane rail fastening solutions. Operating since 1971, GANTREX® has offices worldwide to meet your needs with local personnel, regional manufacturing and technical departments in both North America and Europe. With a staff of over 400, GANTREX® is positioned to provide local solutions based upon world wide experience and understanding. In close contact with the market, GANTREX® continuously develops products and solutions to meet the expanding demands of the industries we serve and has become the indispensable partner in industrial sectors where crane performance is critical, such as: Steel and Aluminum Plants Pulp and Paper Intermodal & Transportation Automated Warehouses Ports and Shipyards Cement Industry Automotive Power Generation & Public Utilities Rail (Crane Rail) RailLok™ Series NEW! RailLok™-Series TRENCH INFILL NEW! Railway Crane Rail Clips (Rail Clips) Crane Rail Pads (Rail Pads) Tieback Assemblies (Surge Connectors) Hydraulic Bumpers (Buffers) Rail on Steel Girder Solutions Rail on Concrete Solutions Grout Soleplates (Rail Chairs) Anchor Bolts Installation Services Rail Welding Inspections (Consultancy) Back to homepage GANTRY RAILING CONTINENTAL Rue du Commerce, 19 1400 NIVELLES Tel: 32-(0)67888030 - Fax: 32-(0)67216321 – Mobile: 32-(0)473933529 Email: info@be.gantry.com - frank.gevelle@be.gantry.com - Web: www.gantry.com Contact person: Mr Frank GEVELLE GANTREX develops, manufactures and supplies elastic rail fastening systems under the GANTREX® label, common to the whole GANTRY Group Back to homepage GARNIMETAL Rue de la Wastinne, 24 1301 WAVRE Tel: 32-(0)10417904 - Fax: 32-(0)10416653 Email: info@garnimetal.com - nathalie.celis@garnimetal.com Web: www.garnimetal.com Contact person: Mrs. Nathalie CELIS GARNIMETAL conceives, makes, assembles and installs metallic sets which integrate electric, electronic elements and automatism. We transform the flat stainless sheet steel, steel, Aluminum, Copper, titanium, to produce tables, cupboards, wagons, furniture or elements of specific assemblies. Back to homepage GILLAM-FEI Mont Saint-Martin, 58 4000 LIEGE Tel: 32-(0)42329595 - Fax: 32-(0)42234276 Email: info@gillam-fei.be - dleonard@gillam-fei.be - Web: www.gillam-fei.be Contact person: Mr Daniel LEONARD Since 1974, GILLAM-FEI has always brought its expertise and knowledge to help its customers solving their main technical issues in different fields such as: Telecom Networks Synchronization, Remote Terminal Units, Remote control (SCADA) and different specific equipment’s. Our wide and experienced engineering department supported by our skilled technicians can bring you the best customer oriented solutions to face the current and future technical difficulties. If there is one industry where the technology must be in constant development and innovative, it’s well the railway industry. In this particular field, where information travels very fast and in huge quantities, mistakes are surely not allowed. Since many years, GILLAM-FEI develops different solutions which are used by the major companies of this industry: INFRABEL, SNCB, STIB and AEG. GILLAM-FEI has developed a complete SCADA/DMS system for the monitoring of the railway substations for the Belgian railway network. GILLAM-FEI has also developed the different Remote Terminal Units (USC3000, USC3003…) which allows collecting all the different data’s and send them to the dispatching. GILLAM-FEI has also developed a DC protection relay for the traction sub-stations. This one has lots of advantages (very sensitive, fast, easy to use…) http://www.gillam-fei.be/industry/railway Back to homepage GMM GROUPE Rue de la Maîtrise, 3 1400 NIVELLES Tel: 32-(0)67442454 - Mobile: 32-(0)498572210 Email: request@groupegmm.com - giuliano.laquatra@groupegmm.com Web: www.groupegmm.com Contact person: Mr Giuliano LAQUATRA Group MENDES - (GMM) - is a group of SME-VSE businesses distributed throughout Europe whose industrial activities are mainly in Belgium. A highly specialized staff and constantly updated machinery guarantee optimal service. MENDES group In 1995, Gabriel MENDES, the founder of MENDES Group, worked as a project manager in the glass machinery business in the region of La Louvière, in Belgium. He decided to buy one of the business activities of ACEC (Ateliers de Constructions Electriques de Charleroi) in Marcinelle (a city in the Charleroi region of Belgium). Gradually his shrewd mechanical and business acumen led him to invest in precision engineering in the Charleroi region, and then recently in the Brabant Wallon Region. Today the Mendes Group (GMG) has no fewer than twenty companies, SME-VSE, throughout several European countries in areas which are as diverse as they are promising. Unknown outside of its regional sphere, MENDES Group’s more recent ambition is to share its expertise with new subscribers and excel not only in the Benelux region but in the EU and Switzerland as well. Its core business in Belgium is mainly focused on precision engineering, electromechanical relays and high precision welding, the latter being complementary, to ensure a range of services in areas as diverse as the aeronautics, pharmaceutical, steel, foundry, and railway industries etc. Here is a glimpse of our areas of interest: The flagship of the group, ATVE is located in the heart of the industrial activities of Charleroi and has several major advantages including proximity to major primary contractors to say the least. Its initial modest activity has intensified in recent years by the hiring of highly qualified technicians and the purchasing of new equipment. ATVE S.A. Signalling is an SME of around twenty people that specializes in the production and renovation of electromechanical relays for railways, subways, trams, nuclear power plants, the steel industry, the cement industry and the list goes on... Having found its market "niche", the company is constantly seeking new solutions for its customers. The accuracy of the settings, the strict controls and the expertise of its operators puts ATVE Signalling in a unique and reliable partnership with Belgium for safety relays. One of the latest remarkable acquisitions of the Group is Dascotte, located in Nivelles, the nerve center of Brabant Wallon. This workshop of fine machinery perfectly complements the activities of ATVE in Charleroi while keeping its technical and commercial specificity. Being the initial business of what is now the Mendes Group, LM DUFOURCO is in many ways a reflection of the entrepreneurial spirit of its founder. Originally a small unassuming workshop, its range of possibilities has grown over the years. Hence, in 2011, LM DUFOURCO can offer its customers a whole range of surface treatments and sub-contracting: the design of electroplating kits for repairing infrastructures of high-speed trains through the electrolytic plating, heat-shrink sleeving, zinc white, chroming, black oxidation, micro blasting, copper plating, nickel plating, etc.. All this is done with a thoroughness of craftsmanship and combined with the industrial strength of the group. Their attention to detail and their regard for perfection are what best characterizes the human-sized company firmly. MALU is in some ways the internal "Service Center" of the group. A TPE in the center of the axis of other activities of interest in Charleroi, MALU guarantees intragroup outsourcing which provides services for the operation of the other companies. MALU may also, where appropriate, ensure the development, assembly, disassembly, startup, maintenance of various infrastructures and thereby externalize its activities on behalf of third parties. It is an essential link that ensures the smooth running of activities. Established in 2004 by the late Jean-Pierre Paulus, TechWelding was purchased in July 2010 by the Mendes Group following the sudden death of its founder. It was already a sub-contractor of the Group in previous years and its activity is deliberately oriented towards high technology. Microwelding (Micro TIG., Micro Plasma, Micro Laser) is now demanded in various ways to fields as diverse as the aerospace industry, the pharmaceutical industry, foundries, precision engineering, the railway industry, industrial filters and so on. Equipped with a machine park on the cutting edge and under perpetual technical renovation as well as with highly qualified welders, this SME is rapidly growing. Back to homepage G-TEC Zone Industrielle des Hauts-Sarts - Rue des Alouettes, 80 4041 MILMORT Tel: 32-(0)43878500 - Fax: 32-(0)43878509 Email: info@g-tec.eu - f.renardy@g-tec.eu - Web: www.g-tec.eu Contact person: Mr François RENARDY Infrastructures & Civil Engineering G-Tec has a long experience in civil engineering and infrastructures related projects such as HST, waterways, bridges, roads, tunnels... The understanding of the geology and its influence on the design of the project is a condition for successful completion of each project step. G-Tec has the knowledge to plan and supervise geotechnical campaigns, to carry out geophysical campaigns and to organize fully integrated site investigations on land and water. Considering that there is not always a 100% solution for getting a clear view of the expected geological situations, choosing the right combination of geophysical and geotechnical tools is a matter of knowledge and experience and of gathering as much background info as possible. Back to homepage HEINEN ELECTROTECH Rue d'Aix-La-Chapelle, 189 4701 KETTENIS Tel: 32-(0)87591010 – Fax: 32-(0)87591011 Email: e-mail@heinen.eu - mir@heinen.eu - Web: www.heinen.eu Contact person: Mr Marc IMETSBERGER Railway Drive and railway marking Electric works of railroads: high and low voltage, drive and road marking and it both on the classic lines and on the new lines with high speed. Low-voltage manufacturing of corresponding boards in the standards and the specific prescriptions of the railroad domain We also realize all the works in connection with the railway marking, as the installation of specifies devices in ways, complete assembly of the signals or still the implementation and the connecting of changing rooms. Installation of cables, conducts and gutters Manufacturing of electric device of command Complete assembly and connecting of changing rooms of road marking and for level crossings Assembly and connecting of signals Installation and connecting of cables of road marking and power Cables with optical fibers Assembly and connecting of heating of points Assembly of lighting Back to homepage IBB GROUP Rue Saint Urbain, 29 6927 TELLIN Tel: 32-(0)84378686 – Fax: 32-(0)84378688 – Mobile: 32-(0)477651806 Email: info@group-ibb.com - olivier.paquay@group-ibb.com - Web: www.group-ibb.com Contact person: Mr Olivier PAQUAY IBB Group was founded on 7th November 2001 by Mr Olivier Paquay. As a specialist in the after-market, the IBB Group supply electronic, electrical and mechanical products for the railway, military and aircraft sectors. IBB Group has a worldwide purchasing network to meet the specific demands of the customers backed by our own engineering and production skills. IBB Group is also a business agent to negotiate bargains, to find new markets and new investors, to do lobbying among the national and international organizations and to represent the interests of foreign companies which use the expertise of our company. Since 2005, IBB Group has decided to create 4 business units to serve each of the different markets: IBB Railway Spare Parts, IBB Military Spare Parts, IBB Aircraft Spare Parts and Lobbying. In 2009, based on our strong family experience and on the growing demand of raw material, we have decided to create a new business unit, IBB Wood, mainly focused on exportation and importation. On 3rd February 2010 in Bangkok, Mr Olivier PAQUAY, Founder & Managing Director of IBB Group, has signed an exclusive distributor agreement for Europe with Mr Umberto Comini, Executive Vice President of Oriental Copper Co. Ltd. Back to homepage INFRABEL Place Marcel Broodthaers, 2 1060 BRUXELLES Tel: 32-(0)25252111 Email: info@infrabel.be – Web: www.infrabel.be INFRABEL is responsible for the Belgian railway network. Every day, 12,168 employees ensure optimum performance of our equipment: railways, catenaries, switches, signals, crossings, etc. Mobility and accessibility in Belgium are our primary tasks, which is why we keep expanding our railway infrastructure. Our mission: to develop a safe and highquality railway network for all the trains of the future. In our role as infrastructure manager and operator of the Belgian railway network we distribute the available capacity on the railway lines and coordinate all the trains running on Belgian territory. An indispensable railway network In our strive to create optimum opportunities for train traffic we are expanding the railway network so as to make it a strong link within a sustainable transport system. The central location of our railway network within Europe offers plenty of opportunities for the socio-economic development of our country. INFRABEL makes good use of these opportunities and through numerous projects, continues to turn the Belgian railways into an indispensable means of transportation. Back to homepage INGRIF GROUPE RICHARD FLAMEE Rue Neuvice, 115 4420 MONTEGNEE Tel: 32-(0)42476320 - Fax: 32-(0)42460664 Email: ingrif@ingrif.com - jean-marie.wintgens@ingrif.com - Web: www.ingrif.com Contact person: Mr Jean-Marie WITGENS INGRIF started her activities with the installation and maintenance of radio-frequency remote control equipment designed for industrial cranes and locomotives. Today our company has extended her activities in the transport & logistics sector and developed her offer in wireless communication. Safety is one of the highlights of our products. Our radio remote control equipment has been designed for environments which require maximum reliability. Our remote control units for locomotives are leaders on the Belgian market in protected frequencies. Multiplex System Our company has been the first to propose multi-user radio control equipment on the same protected frequency. Unique Regulation System Our Rail & Traction R&D Department has developed a unique regulation interface enabling remote control of locomotives at a very low speed. Our subsidiary RAIL & TRACTION INTERNATIONAL is specialized in the revamping of railway material such as locomotives, rolling stock and maintenance equipment. Back to homepage INOV Rue le Marais, 115 4530 VILLERS-LE-BOUILLET Tel: 32-(0)42280832 - Fax: 32-(0)42280832 Email: tilman.jacques@inov.be - Web: www.inov.be Contact person: Mr Jacques TILMAN Industrial design Back to homepage ITB-TRADETECH Avenue des Eaux Vives, 13 1332 GENVAL Tel: 32-(0)26538853 - Fax: 32-(0)26536924 Email: info@itb-tradetech.com - christian.thomas@itb-tradetech.com Web: www.itb-tradetech.com Contact person: Mr Christian THOMAS During a century of existence, our company will have produced several tens of millions of sleepers, equipping Railway networks on 4 continents. For the past 30 years, we have made the concrete sleeper evolve to have a track support, very performing, very reliable, very simple to produce, very economical and perfectly adapted to all railways categories. Our commercial references are international; our know-how is an asset for the profitable exploitation of the networks. Back to homepage JEROUVILLE Quartier Haynol, 1 6800 LIBRAMONT Tel: 32-(0)61230340 - Fax: 32-(0)61225458 – Mobile: 32-(0)495511522 Email: entreprise.jerouville@jerouville.be - benoit.frauenkron@jerouville.be Web: www.jerouville.be Contact person: Mr Benoit FRAUENKRON Installation of cables, pipes, sewers and collectors Construction and maintenance of railroads and of public road networks Back to homepage JK SERVICE Sur les Vignes, 37 4651 BATTICE Tel: 32-(0)87531592 - Fax: 32-(0)87531596 – Mobile: 32-(0)497542064 Email: office@jkservice.be - sbardella@jkservice.be - Web: www.jkservice.be Contact person: Mr Denis SBARDELLA JK Service S.A. realizes since 1994 the trading of mechanical spare parts and welded assemblies (up to a unit weight of 100 tons) according to the drawings and specifications of his customers. The castings and forgings can be delivered pre-machined or completely finished according to the drawings. Our company is able to perform your specific needs in all kind of qualities, receptions, heat and surface treatments. JK Service is also responsible for the logistic problems: transports and possible customs formalities. Please find hereafter some examples of supplies for trains, tramways and underground: Switches Saddles Rubber soles for saddles Pulling bars Brake levers Bearings Brake drums Keys Back to homepage JOHANSON3 Rue de la Loi, 25/21 7100 LA LOUVIERE Mobile: 32-(0)493494236 Email: info@johanson3.com - Web: www.neerman.net Contact person: Mr Johan NEERMAN Johanson3 is emerging out of a family business which has focused on public transport since 1967 with numerous references in the making of Trains, Metros, Trams, busses, Cars, boats and individual mobility. We are transport consultants and architects engaged in the design of leading-edge environmentally friendly public transport and infrastructure for the benefit of the environment, the user and the local community. Our mission is to help manufacturers, local communities, government agencies and engineering companies realise better ergonomic and functional concepts particularly with zero and ultra-low emissions. Our main references are: the metro of Brussels, the metros of Lyons with the funicular, the metro of Marseilles, the tramway of Nantes, the tramway of Grenoble, the funiculars of Tignes, les Deux Alpes, the tramway of Strasbourg, the people mover SK, the Citadis for Alstom. Johan Neerman has also participated in the conceptual design for Peugeot; the car maker. Back to homepage JUNGBLUTH ALU PARTNERS Rue de l'Abbaye, 56 4040 HERSTAL Tel: 32-(0)42405800 - Fax: 32-(0)42405807 Email: info@japsa.be - roland.jungbluth@japsa.be - Web: www.japsa.be Contact person: Mr Roland JUNGBLUTH Our team offers a wide range of services across the spectrum of building façades. We provide independent technical design and leading edge inventive technical solutions for the external building envelop. Our advice on all aspects of façades is supported by a continuous close working relationship of experts with architects and engineers. Our experts contribute support in research of building envelope technology and assist with expertise in court procedures. Back to homepage KLUBER LUBRICATION Rue Cardinal Mercier, 100 7711 DOTTIGNIES Tel: 32-(0)56483333 - Fax: 32-(0)56486252 Email: sales@be.kluber.com - francis.debal@be.kluber.com - Web: www.kluber.com Contact person: Mr Francis DEBAL “Go“ signal for rail vehicles Speciality lubricants from KLÜBER LUBRICATION make rail vehicles and railway facilities run smoothly, increase performance, reduce wear and extend maintenance intervals. All that in an environmentally friendly way and from a single source Our lubricants cover all applications in the railway sector Vehicle components: door units, traction motor bearings, gearboxes and couplings, axlebox bearings, brakes, buffers, wheel flange, screw connections and air compressors Track systems: switch plates, fishplates and overhead lines The tried-and-tested speciality lubricants made by KLÜBER LUBRICATION ensure economical and ecologically sound operation. Bogie Power transmission Track system Traction motors Vehicles / accessories Wheel / brake Back to homepage KST LIGHTING Cour Lemaire, 16 4651 BATTICE Tel: 32-(0)42470167 - Fax: 32-(0)87314221 – Mobile: 32-(0)485553556 Email: info@kst.be - vansteenberge.b@kst.be - talukder.f@kst.be Web: www.kstechniques.com - Skype : kst.lighting Contact persons: Mr Baudouin VAN STEENBERGE – Mr Farjad TALUKDER Since 1982, KST LIGHTING is a leading designer and manufacturer on the rolling stock market of electronic and lighting equipment’s (Luminaries, electronic inverters & converters, LED lighting systems...) for trains, metros, tramways and buses. KST LIGHTING is driven by the will to create, develop and manufacture reliable products, performing and innovative solutions which match your needs as well as your budgets. We have control of know-how, from design to manufacturing. This enables us to ensure quality and reliability and to provide you the best response to your expectations. KST LIGHTING provides: the design and manufacturing of complete lighting system as reading lamps, passenger compartment lighting, luggage rack lighting, vestibules, toilets, gangways, emergency, etc. the manufacturing and the supply of a wide range of electronic DC and AC inverters and converters the supply of lighting products: TL tubes T5 or T8, Fluo-compact lamps, LED lamps, sockets, halogen lamps, connectors, cabling, voltage regulation cards, electronic racks (specific functions, relay racks...). More details on the web site or by phone, by email or during a visit. Back to homepage LAPOTRE ET FILS ETS Rue de la Station, 104 5670 NISMES Tel: 32-(0)60311004 - Fax: 32-(0)60313028 – Mobile: 32-(0)476526474 Email: lapotre.d@lapotre.be – Web: www.lapotre.be Contact person: Mr Didier LAPOTRE Crossbars of railroad Parts of crossing Floors of cars Back to homepage LEBOIS Parc Industriel de Mariembourg - Rue du Karting, 6 5660 MARIEMBOURG Tel: 32-(0)60312500 - Fax: 32-(0)60312299 Email: lebois@skynet.be Contact person: Mr Bruno HUBERT Wooden crossbars for railroads Back to homepage LES ACIERIES DE LA MEUSE Rue Mathieu Steenebrugen, 3 4602 CHERATTE Tel: 32-(0)43627943 - Fax: 32-(0)43621012 Email: acieriesdelameuse@skynet.be Contact person: Mr Marcel BOLLEN Hearts of crossing and boxes of steel points in the manganese Back to homepage LES RESSORTS WILFART Rue Chanoine E. Martin, 7 A 7520 TEMPLEUVE Tel: 32-(0)69352180 - Fax: 32-(0)69353916 Email: info@ressorts-wilfart.com - regis@ressorts-wilfart.com Web: www.ressorts-wilfart.com Contact person: Mr Régis WILFART Realization and of complete subsets including/understanding springs and other parts, the company creates its own workshop sheet-iron works. Back to homepage LI MARTKOOF Rue d'Havré, 114 7000 MONS Mobile: 32-(0)498596837 Email: info@limartkoof.com - Web: www.limartkoof.com Contact person: Mr Roman FABJANCZYK Belgian architectural office specializing in Architecture Urban Planning and Strategic Development management It brings together architects, urban planners and designers from Europe and Asia to develop new range of services at numerous scale. Its structure is based on a collaborative network and guarantees efficiency and flexibility. LI MARTKOOF works with a system thinking approach and promotes innovation strategy by exploring new global issue adapted to future challenges. Back to homepage LMS Rue des Chasseurs-Ardennais - Liege Science Park, 8 4031 ANGLEUR Tel: 32-(0)43616969 - Fax: 32-(0)43616980 Email: els.coenen@lmsintl.com - Web: www.lmsintl.com Contact person: Mrs. Els COENEN LMS is a leading provider of test and mechatronic simulation software and engineering services in the automotive, aerospace and other advanced manufacturing industries. As a business segment within Siemens PLM, LMS provides a unique portfolio of products and services for manufacturing companies to manage the complexities of tomorrow’s product development by incorporating model-based mechatronic simulation and advanced testing in the product development process. LMS tunes into mission-critical engineering attributes, ranging from system dynamics, structural integrity and sound quality to durability, safety and power consumption. With multi-domain and mechatronic simulation solutions, LMS addresses the complex engineering challenges associated with intelligent system design and model-based systems engineering. Thanks to our technology and over 1250 dedicated people, LMS has become the partner of choice of more than 5,000 manufacturing companies worldwide. LMS operates in over 30 key locations around the world. Rail & Train Public transport is a key element in the mobility of communities. However this type of transport can be a source of vibrations and might therefore be seen as a potential threat to the surrounding infrastructure. Functional reliability of the systems is a major operational concern. Also the pass-by-noise of trains is a recurring constraint, certainly in cities with dense population. Another tendency is set with soaring oil prices and increasing pollution. Governments and transportation authorities put more effort to explore alternative options like electrical propulsion. Whether it concerns trains, trams, metro, subway, underground, light rail or monorail, LMS offers test and mechatronic solutions for NVH engineering, durability, thermal and energy management, dynamics, controls development and much more. LMS supports transportation authorities to carry people and freight cheaper, faster, quieter and cleaner. Back to homepage LOGIPLUS Aéropole de Charleroi - Rue Clément Ader, 1B 6041 GOSSELIES Tel: 32-(0)71444466 - Fax: 32-(0)71439574 Email: info@logiplus.com - bernard.boisdequin@logiplus.be - Web: www.logiplus.be Contact person: Mr Bernard BOISDEQUIN Our Business Design and manufacture of railway and industrial electronic equipment Safe, Reliable and Made-To-Last Products Since our constitution in 1988, several thousand items of equipment delivered for the rolling stock of the major European networks. Our design techniques pay particular attention to aspects of safety, reliability and availability. Our Consulting Role Consultancy at the stage of defining specifications and possibly drafting them. Mastery of the ergonomic, visual and acoustic constraints of equipment installed in driver cabs An Integrated Approach As responsible industrial partner, LOGIPLUS takes equipment completely in hand, from its design stage to its long-term maintenance Control of Standards LOGIPLUS controls the design standards of railway onboard equipment and industrial equipment. Our products operate in a strongly perturbed environment: extreme temperatures, damp, dust, sustained vibration, chemically hostile milieu, strong electromagnetic disturbances, etc. Flexibility and Reactivity Flexibility and Reactivity are assets enabling us to respond to specific customer constraints with short lead-times. Quality LOGIPLUS masters the supply chain for all items required for equipment manufacture. Our manufacturing partners are selected to meet the specific requirements of industrial and railway network qualification. We apply very strict manufacturing and equipment testing procedures. The traceability of delivered products is perfectly organised. Long-Term Maintenance We operate a long-term after-sales service for our equipment, especially for railway products that can last for more than 25 years. Back to homepage LOUIS ENGINEERING Boulevard d’Avroy, 68 4000 LIEGE Tel: 32-(0)42323777 - Fax: 32-(0)42231784 Email: info@louisengineering.be - mc@louisengineering.be - Web: www.tpf.eu Contact person: Mr Marc CAPPA Transports Our company has a long and successful history in providing engineering services in this sector. Back to homepage MECANIQUE FERROVIERE DEVELOPPEMENT MFD Rue d’Anderlues, 138 7141 CARNIERES Tel: 32-(0)64431400 - Fax: 32-(0)64458632 Email: durieux-eav@bmedia.be Contact person: Mr DURIEUX Bolt Cross-rail Crossing (point) Rail Back to homepage MEUNIER GROUP Rue Mandenne, 24 6590 MOMIGNIES Tel: 32-(0)60510051 - Fax: 32-(0)60510060 – Mobile: 32-(0)475647486 Email: meunier@meuniergroup.be – Web: www.meuniergroup.be Contact person: Mr Jean-Jacques MEUNIER For many years, we have been active in the rail vehicles industry. We can now rely on our expertise in manufacturing metal windscreen frames for high-speed trains. As we use high-quality materials and advanced technologies, we can guarantee a high quality level manufacturing process. We can provide the finishing process according to your needs. Custom making has become one of our key values in this advanced and competitive sector. Our extended product line will meet most of your needs. You will find many products designed for the rail vehicle interior. Discover our products Back to homepage MICE Rue de Bruxelles, 174 C 4340 AWANS Tel: 32-(0)42247110 - Fax: 32-(0)42242584 – Mobile: 32-(0)474270797 Email: mice@micesa.be - olivier.keutgen@micesa.be – Web: www.micesa.be Contact person: Mr Olivier KEUTGEN Noise protection rail & road Noise barriers Acoustic claddings Equipment’s for train stations and tunnels Today, the continuous increase in economic activity inevitably generates annoying sounds ever more important for the environment. Concerned about respecting of a certain level of life quality, public authorities have tried to reconcile in the best way possible the large scale infrastructure projects such as urban roads, highways, tunnels, very high speed train lines,… with the harmonious development of all the sites where habitat and communication infrastructure cohabitate. In areas where noise cannot be reduced enough at the source, the essential preoccupation of sustainable development inevitably goes through acoustic protection measures. Back to homepage MOCKEL Zoning Industriel Eupen - Baelen - Rue du Développement, 9 4837 BAELEN Tel: 32-(0)87593956 - Fax: 32-(0)87593950 Email: project@mockel-precision.be – Web: www.mockel-precision.be Contact person: Mr Sébastien KERZMANN Master of precision for more than 60 years! Mockel is a dynamic business employing experts in the series production of precision mechanical parts. We have the machinery, the technical know-how and the necessary experience for the production of complex parts. Be it small or large parts, simple or complex components, series of 5 or 10,000 parts, we translate your ideas into a perfect technique. All our parts are turned and milled with highest precision on modern CNC (Computerized Numerical Control) machines. Our customers are notably active in the following sectors: aeronautics and space, defence, machine construction, hydraulics, renewable energy… Your ideas, plans and prototypes are at the beginning of our work: they are at the root of our calculations and of our production. The carrying out is supported by CAPM Hi-Passand CAD/CAM MASTERCAM X6 systems. Besides standard formats as IGES-STEP, we can also integrate files in CATIA V4 – V5 format. Mockel currently employs 55 workers and has been certified conforming to: - ISO 9001 : 2008 - European aeronautics norm EN 9100 : 2003 - Manufacturing and assembly of parts and components for medical devices ISO13485: 2003 Below you will find an overview of our services: Mechanical precision machining; 3, 4 & 5 axis milling centres machining, with pallets and in pendulum; CNC turning centres machining (2 to 5 axis); Assembly of mechanical subgroups; Grinding; Honing; Slotting; Grooving; Thread rolling; Electronic embossing; Continuous Ink Jet; Surface Treatment; Heat treatments; Finished products. Back to homepage MONNAIE-BAYS Quai du Pont Canal 3 7110 STRÉPY-BRACQUEGNIES Tel: 32-(0)64460260 - Fax : 32-(0)64458846 Email: info@monnaie-bays.be – Website: www.monnaie-bays.be Contact person: Mr. Bernard NICOLAS Active since 1884 MONNAIE-BAYS S.A. has specialized itself in anti-corrosion painting applications. Our company has three main activity sectors: Anti-corrosion paint application in great heights and electrical environment (anticorrosion maintenance of power poles, pylons, catenary systems…) Painting in the building industry (station buildings…) Industrial paintings on industrial work sites or in our own specialized workshop (steel deck and through railway bridges, steel frameworks, steel guard rails…) We install ourselves the scaffolding for each work site. Every surface is prepared before any anti-corrosion system applications: we use professional tools for degreasing and rust removal such as needlegun scaler or wire brushes. We then clean out surfaces by shot- and sandblasting. Back to homepage MOTEURS MOES Avenue Reine Elisabeth, 59 5300 ANDENNE Tel: 32-(0)85849980 - Fax: 32-(0)85849989 – Mobile: 32-(0)479650755 Email: f.chaudoir.moes@pegard.com – Web: www.ogepar.com Contact person: Mr Frédéric CHAUDOIR Turbo-chargers Thanks to its branch office KBB (Kompressorenbau Bannewitz GmbH) in Bannewitz (Germany) the group OGEPAR develops and produces turbochargers. KBB is especially active in the branch of diesel engines (MDO-HFO) or gas engines with a power between 300 and 8.000 kW. These engines are used for locomotives, electro groups and marine propulsion. Not only ABC but also other renowned manufacturers of engines, such as MAK, HYUNDAI, WARTSILA, YANMAR, GE and CUMMINS… are clients of KBB. KBB has already manufactured and sold more than 40.000 turbochargers Back to homepage MULTITEL Rue Pierre et Marie Curie, 2 7000 MONS Tel: 32-(0)65342732 - Fax: 32-(0)65342729 Email: urbain@multitel.be – Web: www.multitel.be Contact person: Mrs. Geneviève URBAIN MULTITEL is a Research Centre in scientific technology supported by a multidisciplinary team including engineers and technicians, as well as a sales structure. Its aim consists in developing and implementing innovative projects in collaboration with local and international companies. MULTITEL'S scientific skills include voice technologies, data fusion, optic fibre applications, image processing, and computer network management. Besides its Research & Development activities, Multitel offers services in optics and telecom, and in company computer networks. The Certification department of Multitel is an independent laboratory for the ERTMS certification, specialized in testing solutions, as a support for the certification and validation of industrial solutions and components, in particular for the railway signalling sector (ERTMS). It provides R&D in the design of new tools (hardware and software) as reference for the whole railway sector. The ERTMS Laboratory of Multitel complies with the European Regulation 765/2008 which states that new EVC equipment needs to be tested in ISO 17025 accredited laboratories. The Railway Certification department of Multitel has been the first ISO 17025 accredited laboratory (427-TEST) for EVC test following the Subset-076 (since February 2011) and for EUROBALISE/BTM test following Subset-085 (since June 2013). Multitel participates in a number of ERTMS R&D activities, developing ERTMS tests solutions and services for the European Railway Agency and the European Commission, the industry and infrastructure managers. Examples of test solutions and services are: Component testing: Subset-076 (EVC – onboard train computer), Subset-085 (Balise and BTM testing) and Subset-074 (STM) testing. Maintenance solutions: balise quality of signal analysis tool and hardware, and services and testing facilities for the migration of train trackside infrastructure to newer standards. Train/Track Validation: MultiRailLab can provide in laboratory early detection of train/track validation problems. Actually, we can provide full validation of new lines as well of new trains on existing tracks, based on project data, gradients, operational and engineering rules, balise and radio telegrams. The Multitel ERTMS laboratory is also capable of testing complex environments, with multiple trains and its interactions with multiple onboard equipment (European Vital Computer – EVC), Radio Block Centres (RBC) or Interlock equipment (IXL), with our simulators or against real equipment (interfaces might need to be implemented in a caseby-case basis). These tests can be used to plan train traffic, test train/track interoperability issues among different manufacturers and to optimize resource consumption. Multitel is participating in the TEN-T: FSED project (Facilitating and speeding up ERTMS deployment). In this project, Multitel works on the cross validation of multiple onboard and track implementations of ERTMS baseline 2 equipment’s, including the definition and test of operational scenarios of the main European Countries. Multitel is also responsible for the first baseline 3 onboard equipment certification Back to homepage NEXANS BENELUX Rue Vital Françoisse, 218 6001 MARCINELLE Tel: 32-(0)71440440 - Fax: 32-(0)71440563 Email: sales.power-cables@nexans.com – Web: www.nexans.be Contact person: Mr Alain DE DIER High-performance trains need efficient infrastructure Rail transportation is very dependent on the quality of the infrastructure that supports it, and that includes cables and cabling systems for telecommunications and energy. Modern high-speed trains demand cables with different characteristics in terms of bandwidth, safety, electromagnetic immunity and resistance. A definite trend is interoperability, which allows trains to move easily across borders and even continents. Here, too, cables must comply with the new consolidated ERTMS/ETCS standards which are progressively integrating GSM-R radio technologies for train control, while continuing to rely on older route control systems (relay interlocking) for safety and redundancy. Indeed, safety has become a prime concern for the world’s rail operators, and there is a demand not only for more reliable operating systems, but also for materials with improved fire-performance characteristics, especially in tunnels, stations and public areas. Urban mass transit, subways, fully-automated metros, light rail suburban lines and trams are experiencing substantial growth, especially in Asia. Each rail mode has its own cable needs. What railway operators expect of a cable manufacturer Range of high-quality cables from one supplier Mastery of energy, data and radio-based technologies Installation for mainline, mass transit, tunnels, right-of-ways, etc. Enhanced fire performance for public and infrastructure safety Interoperability, open standards, and worldwide compliance Cable efficiency, compactness, lightness, and resistance Low costs, minimum maintenance, easy upgrades To answer these challenges, NEXANS provides a complete range of cables and accessories for all of your railway networks projects. Back to homepage NGL Parc Industriel - Rue du Parc, 16 4432 ALLEUR Tel: 32-(0)42474130 - Fax: 32-(0)42475759 – Mobile: 32-(0)475804417 Email: nino.volante@gsngl.com – Web: www.gsngl.com Contact person: Mr Nino VOLANTE Rail signalling equipment (panel, pylon) Back to homepage NIZET Rue Laid Burniat, 2 1348 OTTIGNIES - LOUVAIN-LA-NEUVE Tel: 32-(0)10451867 - Fax: 32-(0)10452782 – Mobile: 32-(0)496578261 Email: nizet@nizet.be - ems@nizet.be – Web: www.nizet.be Contact person: Mr Emmanuel SIX The Infrastructure department manages your projects from the study to commissioning. Our engineering and design office made up of engineers, draughtsmen, programmers and automation engineers is a guarantee for a swift and professional project design. A project management and implementation structure (with a dedicated project manager, versatile site engineers and experienced test engineers) offers guaranteed success for the construction and commissioning phases of your installations. Our projects cover the areas of water distribution and treatment, infrastructural works on roads, railways, airports and waterways as well as all electromechanical industrial installations. Back to homepage NSILITION Boulevard Dolez, 31 7000 MONS Tel: 32-(0)65374240 - Fax: 32-(0)65374241 Email: info@nsilition.com - thierry.delmot@nsilition.com – Web: www.nsilition.com Contact person: Mr Thierry DELMOT NSILITION is a leading analog and mixed-signal ASICs/SoCs and semiconductor IP provider. NSILITION specializes in the development of industrial quality circuits, with expertise in mixed-signal, high-speed and/or low power analog and full-custom digital circuitry. NSILITION's circuits employ various specific enhancements to improve power efficiency, yield and reliability. The semiconductors IPs are available as ready-to-use design kits for most popular silicon technologies. NSILITION's IC and IP design service offers top quality design, customization and support dedicated to your needs and your specifications. The design team of NSILITION has many years of hands-on industrial level design experience on various Analog and Mixed-Signal SoCs electronic systems, as well as their characterization and qualification for production. We will support you through the whole integration and product validation phase of the IC or IP. NSILITION services several main customers active in applications area like wireline and wireless communication, industrial, medical and aerospace. Back to homepage POLE MECATECH Route de Hannut, 4 5004 BOUGE Tel: 32-(0)81206850 - Fax: 32-(0)81725150 – Mobile: 32-(0)475767617 Email: info@polemecatech.be - jacques.germay@polemecatech.be Web: www.polemecatech.be Contact person: Mr Jacques GERMAY The MECATECH Cluster, a driver of innovation in mechanical engineering With close to 200 industrial and academic entities involved in joint mechanical engineering projects, the MECATECH cluster is generating unprecedented dynamism The MECATECH Cluster, a competitiveness cluster in mechanical engineering A competitiveness cluster unites enterprises and research and training units around an economically promising field. The aim: to increase these enterprises’ innovation, production, and service capacities so as to raise their profiles on the European and world market. Mechanical engineering encompasses a set of technology firms: component and subunit manufacturers; full-line suppliers/integrators of “functional systems: ” industrial machines or processes and consumer products. Mechanical engineering: a transverse field Almost all fields of activity are concerned: from consumer products (cars, household appliances, etc.), to health, with machines and industrial processes in between. From hybridized technology in the field of mechanical engineering… The machines and processes of mechanical engineering and their components incorporate an increasingly varied range of scientific fields and cutting-edge technology. These growing interactions are leading to the “hybridization of mechanical engineering," which in turn allows for truly groundbreaking innovations. …to the need to network The hybridization of technology makes networking a must for the various players in mechanical engineering. Universities and research centers are key players in these networks. The clusters’ objective: fostering and facilitating such networking. Strategic orientations MECATECH Cluster projects revolve around four strategic orientations: materials and surfaces of the future, comprehensive forming technologies, micro technologies and mechatronics, and intelligent maintenance. Back to homepage PRECIRONDS Rue du Fourneau, 5 5651 THY-LE-CHATEAU Tel: 32-(0)71613102 - Fax: 32-(0)71613165 Email: precironds@skynet.be Contact person: Mr Louis CORBEAU Bolts Back to homepage PREFABRICATION ET FERRAILLAGE PREFER Sart d'Avette, 110 4400 FLEMALLE Tel: 32-(0)42737200 - Fax: 32-(0)42756509 – Mobile: 32-(0)475271535 Email: portier.paul@group-portier.be – Web: www.prefer.be Contact person: Mr Paul PORTIER Concrete crossbars for railroads Back to homepage PREFARAILS Chemin Corbisier, 4 7060 SOIGNIES Tel: 32-(0)67892980 - Fax: 32-(0)67892998 Email: info@prefarails.eu – joseph.rode@prefarails.eu - Web: www.prefarails.eu Contact person: Mr Joseph RODE Embedded rails GSF Applications New tracks, extension of existing tracks, renovation of tracks in use On bridges, in tunnels or anywhere where the available vertical space is limited Integration of switches, water drainage and other special track features Especially recommended for casings in one piece (stamped concrete, poured asphalt, deactivated concrete) Can be combined with a suspended slab system to achieve optimal sound and vibration insulation levels Efficiency 12 men (2 welders and their assistants) can install 144 linear metres of single track per day. The PREFARAILS embedded rail system: fixes and supports the rail in all directions reduces installation costs and time insulates vibrations and sounds up to 10dB depending on the type of casing (Compact, Classic or Comfort) insulates the rail electrically from its surroundings STERO Applications Rapid priority installation Possible to install it with tracks in use Increases the stability and longevity of all types of casing due to the concrete beam interfacing Can be combined with a suspended slab system to achieve optimal sound and vibration insulation levels Efficiency Similar installation efficiency to the GSF system. The speed of installation can be increased if the installation of STERO beams is combined with the installation of prefabricated casing elements. The PREFARAILS embedded rail system fixes and supports the rail in all directions reduces installation costs and time insulates vibrations and sounds up to 10dB depending on the type of casing (Compact, Classic or Comfort) insulates the rail electrically from its surroundings MODULIX Applications Allows the installation of tracks at strategic points in a network (junction, level crossing, access to strategic sites, close to hospitals etc.) within a very short period of time Possible to install water drainage networks, junction boxes etc. in MODULIX slabs. All types of casings can be installed in optimal conditions Can be combined with a suspended slab system to achieve optimal sound and vibration insulation levels Efficiency The fastest integrated installation system The PREFARAILS embedded rail system fixes and supports the rail in all directions reduces installation costs and time insulates vibrations and sounds up to 10dB depending on the type of casing (Compact, Classic or Comfort) insulates the rail electrically from its surroundings Back to homepage PULSAR CONSULTING Avenue Pasteur, 17 1300 WAVRE Tel: 32-(0)10435100 - Fax: 32-(0)10435101 – Mobile: 32-(0)478618020 Email: exportation@pulsar.be - gsm@pulsar.be - Web: www.pulsar.be Contact person: Mr Michel GOOSSENS Pulsar Consulting is an Information Technology (IT) services company. We help our clients to enhance their business performance through the application of high quality IT solutions. Pulsar is particularly active with the following services: Software development IT Services & Products Mobile applications Back to homepage RA CONCEPT Haute Rue, 1 A 1473 GLABAIS Tel: 32-(0)64842317 - Fax: 32-(0)64842317 – Mobile: 32-(0)479844934 Email: stephane.jaumot@raconcept.com - Web: www.raconcept.com Contact person: Mr Stéphane JAUMOT RA Luxury Trains Supported by experienced railway and hotel architects, RA Concept has designed a new concept of luxury trains and proposes the construction and further operation of an exclusive 5-star “Boutique Luxury Train”. It distinguishes itself from existing initiatives through its unprecedented and unequalled design, its elevated level of comfort and service which addresses today’s customer expectations. It combines unique characteristics such as: • • • Elegance, stylish interior architecture and sumptuous design; Exclusivity and customized services; Unprecedented comfort in overnight surface transportation; The company applies a turnkey approach and commits to deliver to an investment consortium a complete train set in full compliance with the technical, operational and safety regulations of the host railway. RA Concept is responsible for the development phase that includes the business plan, the conclusion of service contracts and operating agreement with the host railway operator, the project financing and further set up and incorporation of a local investment company. RA Concept is also globally responsible for the production phase through various partnerships for the production of the interior modules (Belgium), the shells (host country) and the assembly and finishing (host country). RA concept will subsequently support the financial risk of the industrial process up to final delivery. Besides the production of luxury trains, RA Concept plans to lead invest in the investment consortium so as to keep control on the quality of the operation. RA Innovations « Keeping the Technology on Board” RA Concept engineers have a passion for railways. RA Concept has always been interested in new technologies. These two components are the driving force behind “RA Innovations”. We specialized ourselves in « ICT » (Information and Communication Technology), in collaboration with VECTURIS for the functional and organizational aspects of the «railway business». Starting in the early nineties, we applied our new ideas to operational management of vehicle fleets. More specifically we focused on the improvement of railway operations in the field, with centralized software solutions. More recently with the “exploding” availability of onboard technologies, RA Innovation has embarked in several initiatives aiming at putting advanced onboard logic on vehicles, wagons and locos. The objective is still to reduce operational costs but under new angles of “attack”. With this in mind we have straighten our traditional cooperation with VECTURIS which started new railway concessions to manage the operations of several African railways. This cooperation provides RA Concept with an ideal workbench for implementing its news products. Other partners will soon be joining our projects: research centers, university laboratories, small enterprises specialized in onboard technology, etc. Back to homepage RAIL & TRACTION INTERNATIONAL Bahnhofstrasse, 70 4730 RAEREN Tel: 32-(0)87310556 - Fax: 32-(0)87331556 Email: rti@railsettraction.com - Web: www.railsettraction.com Contact person: Mr Richard FLAMEE Locomotive remanufacturing, overhaul, components and repair From reconditioning to complete rebuilding of your railroad locomotives and rolling stock, RAIL & TRACTION INTERNATIONAL is offering repair, modernizing and maintenance services for any kind of traction vehicles. Locomotives, shunters, railcars, dining cars, sleeping cars, tourist trains Maintenance of way vehicles, slugs Maintenance, rebuilding, modernizing, spare parts Railroad material in standard and meter gauges Revamped railway material RAIL & TRACTION INTERNATIONAL owns and runs a 1200 m² workshop where locomotives, shunters and railcars are repaired and reconditioned. Competences: Overhaul and modernizing Maintenance Repair Spares Special equipment’s Training: Technics Safety Manual Operation Back to homepage RAIL & ROAD SERVICE Route de Cronchamps, 27 4970 STAVELOT Mobile: 32-(0)474770527 Email: saucez@rail-road-service.com - Web: www.rail-road-service.com Contact person: Mr Olivier SAUCEZ RAIL and ROAD SERVICE answers to needs reprofiling of rails, weld of rail, as well as in the supply and the pose of system of pedestrian access and vehicles all around and over rails. Every crossing is specific. That is why we conceived the modular strail system with so much flexibility. Back to homepage RAIL EUROPE Zoning Industriel, 6 B 5660 MARIEMBOURG Tel: 32-(0)60312295 - Fax: 32-(0)60312297 Email: info@rail-europe.be - Web: www.rail-europe.be Contact person: Mr François AMORISON Railway sleepers and railway equipment RAIL EUROPE is specialized in railway sleepers manufacture (wood and concrete). In addition to the supply of sleepers and wooden devices, RAIL EUROPE offers a wide range of products, track bolts and fastening systems for wood, concrete or steel sleepers. This includes all types of screws, bolts, track bolts, washers, base plates, rail pads, isolators, clamps, fish-plates and rails. In this range, all grades, drawings, treatments most commonly used are made available as required by users. RAIL EUROPE brings the greatest care in monitoring the manufacture of these pieces made by manufacturers registered by major European networks, which all have a quality assurance system controlled. Measures, chemical and mechanical tests are carried out strictly according to prescribed standards, and throughout production process. A final check is done on our storage site in Brussels - samples are tested in a laboratory - before being stored to ensure precise monitoring of the quality of our products. Our logistics hub may distribute under 48 hours, a very wide range of products across Europe. Forty standard items are stored by reference and regularly supplied to meet all urgent requirements. These items can be either ordered in larger quantities. In addition, RAIL EUROPE offers the opportunity for customers to consider a specific type of setting appropriate to their needs depending on the type of installation, soil, traffic and tonnage on track. Back to homepage REALITY SYS Rue Saint Gilles, 323 4000 LIEGE Tel: 32-(0)42522850 - Fax: 32-(0)42529696 – Mobile: 32-(0)475665558 Email: info@realitysys.com - pierre.fontaine@realitysys.com - Web: www.realitysys.com Contact person: Mr Pierre FONTAINE REALITY SYS develops some leading products in the professional interactive sound systems. The company designs and manufactures a range of tiny professional electronic audio players/repeaters allowing to add interactive and multilingual information/sounds to any place. Our systems are based on industry standards (FAT32 hard-drives or SD or MMC memory cards, mp3, RS-232/485, CAN bus). We also designs now interactive HD Pictures/Video players/repeaters, with Ethernet remote management. In transportation, our products are mostly used in: Subway/Underground, Lift/Elevators, Road Buses, Rail Coaches, Cruise ships... Main products: mp3Stamp picoJukeBox babyBox mp3Can HDAbox Back to homepage REPROCOVER RECYCLING PRODUCT COVERS Route de Charlemagne, 69 4841 HENRI-CHAPELLE Tel: 32-(0)87340437 - Fax: 32-(0)87352815 – Mobile: 32-(0)474975743 Email: reprocov@scarlet.be - Web: www.reprocover.com Contact person: Mr Peter JUNIUS The Belgium based company REPROCOVER has developed, after several years of R&D, a unique recycling process, that enables it to turn waste of (composite) thermosetting plastics, such as polyesters, Bakelite, epoxy, polyurethane..., and waste of fibreglass into a new raw material. Production process (patent protection applied for) In its factory in Henri-Chapelle (Welkenraedt), REPROCOVER developed and installed a recycling line, allowing to break, grind and sieve non-thermoplastic (composite) industrial waste into small granules having a diameter of maximum 6mm. A similar recycling process is carried out on fibreglass waste. Eventually, both substances are completely dried out and mixed with each other in a ratio of approx. 30% of glass fibre flakes. This "new raw material" is subsequently mixed with polyole and isocianate and poured out and pressed in product moulds under 200 ton presses, triggering off a chemical reaction (cold pressure process). Main characteristics of the REPROCOVER products As all of our products are based on thermosetting (composite) waste, the main characteristics of these are also to be found in our finished products: Extreme hardness (Shore D = 75) Resistant to high pressure loads Shock proof Temperature resistance (-70 up to +350°C) Rustproof Low weight (specific gravity of 1.3kg/dm³) Extremely anti-skid (especially when wet, test results of 90 cq 81 points (above 65 = extremely low slip potential)) Resistant to salt, petrol products and chemical detergents Maintenance free UV resistance Good fire resistance Price/quality ratio Worthless to thieves, unlike substitute products made of cast iron or thermoplastics Last but not least the product waste of REPROCOVER's own production is on its turn 100% recycled or reused (recycling dust sold as a concrete additive), based on the "cradle to cradle" principle thus illustrating the "sustainability" of the products. A new application in our recycled non thermosetting composite waste saw the light, the bi-block railway sleeper. Extremely strong, light, resistant to extreme temperatures, universal, vibrations absorbing, price/quality very interesting, etc… This railway sleeper is currently being presented to the European railway companies for further detailed testing to confirm if it will be able to replace the wooden railway sleeper. Last but not least, this railway sleeper would substantially contribute to the reduction of the massive thermosetting composite waste volumes. Back to homepage RESARM ENGINEERING PLASTICS Rue Prés-Champs, 69 4671 BARCHON Tel: 32-(0)43874410 - 32-(0)43874411 Email: info@resarm.com - Web: www.resarm.com Contact person: Mr René GAILLARD Created in 1971, RESARM ENGINEERING PLASTICS, subsidiary of a French-German group, knew how to, during the years, climb up the ladder of the experience in the manufacturing and the manufacturing of parts in technical plastics and in composite materials. Having taken its independence in 2003 and developed even more its know-how, RESARM ENGINEERING PLASTICS, is thus an important manufacturer of any parts of high technologies in these specific materials. Back to homepage RESSORTS KESSEN Rue de l'Hippodrome, 148 4000 LIEGE Tel: 32-(0)43430259 - Fax: 32-(0)43442737 Email: ressorts@kessen.be – Web: www.kessen.be Contact person: Mr Jacques ARTUS The RESSORTS KESSEN, company located in Liege, is specialized in manufacturing all types of industrial springs. The company produces all types of compression springs, tension, torsion springs but also curved and scrolled and manufactures parts like strip off the plates, washers, clips and reels. KESSEN product itself springs coiled hot rolled and cold springs. Our factory produces single or springs in series. KESSEN springs are indeed specialized in the assembly of parts and assembled son. Leaf-springs and helical-springs We offer re-arching of leaf springs for: Cars, trucks and buses, Civil engineering motors, Rail coaches, Overhauling on vehicles Back to homepage RONVEAUX E. ETS Rue Rebonmoulin, 16 5590 CINEY Tel: 32-(0)83212901 - Fax: 32-(0)83212910 Email: info@ronveaux.com - f.kaiser@ronveaux.com - Web: www.ronveaux.com Contact person: Mr François KAISER Bridges - roads, bridges - rail, Canal Bridge Viaducts or cover of tunnels Walls of platform Vegetated screens Breast walls Telecommunication towers Transport lines of electricity BT, MT and also HT and THT Road, urban or ornamental lighting Back to homepage RUBBERGREEN Rue de la Sucrerie, 10 7080 FRAMERIES Tel: 32-(0)65801560 - Fax: 32-(0)65634908 – Mobile: 32-(0)497441383 Email: olivier.prudhomme@rubbergreen.be - Web: www.rubbergreen.eu Contact person: Mr Olivier PRUDHOMME RUBBERGREEN is the specialist of composite rubber and is active in the design and manufacture of high value-added solutions based on recycled rubber. Our areas of interventions are mainly in the following sectors: construction & building, railway, industry, dairy & equestrian industry. In addition to a full range of standard products, the vast majority of which is available in our stock, RUBBERGREEN also develops bespoke solutions for its customers. RUBBERGREEN as a manufacturer conducts its operations mainly 'business to business' and has an extensive network of distributors, partners in different sectors and countries in which the company operates. The company was founded in 2009 RUBBERGREEN in Belgium and has a modern and competitive production center ideally located in the center of Western Europe. RUBBERGREEN recycles more than 1,000 tons per year of high quality rubber. The management team of the Company RUBBERGREEN totals more than 25 years of experience in relevant areas in which the Company operates. Values/Vision RUBERGREEN values immensely the relationship with its customers, partners and suppliers. In this spirit, RUBBERGREEN always aims to: deliver a solution tailored to the requirements of its customers at the right price; work in close collaboration and trust with its customers and partners. Recycling (green credentials) is also at the heart of RUBBERGREEN which, through the creation of performant technical products, gives a second life to rubber waste otherwise destined for destruction or burial. RUBBERGREEN aims to become a major European and international player in the recycling of rubber, constantly improving the quality and technical solutions developed from composite rubber. Railways Whether we are talking about trams and metros in a typical urban area or conventional trains or even high-speed rail, each railway project raises specific issues in terms of vibration and acoustics. Thanks to its experience of composite rubber and serious investments made in this sector (R&D), RUBBERGREEN has developed a range of products to be installed under railway tracks that significantly improve the acoustic performance of rails in urban area and reduces also the maintenance costs of the ballast, often damaged by the "wheel-rail" interaction dynamics. The continuous traffic of trains, trams and subways is a source of many vibrations, whose effects are transmitted through the whole structure of the way - rail, saddle crosses and ballasts - into sub-layers of the surrounding soil. It is therefore crucial to be able to isolate the railway track, whether to improve the comfort of the residents, or extend the life of various components of the railway track - from the track to the ballast. The structure of the mats produced by RUBBERGREEN combines highly resilient rubber in a dimple profiling, which provides unique performance in static stiffness (kstat) and dynamic (Kdyn) with thinner thicknesses than the one of competing products. Back to homepage RUST-ANODE Zone Industrielle - Rue des Fagotis, 3 5380 NOVILLE-LES-BOIS Tel: 32-(0)81834277 - Fax: 32-(0)81834339 Email: info@rustanode.com - Web: www.rustanode.com Contact person: Mr Dominique GILLES RUST-ANODE ® cold galvanization Rust-proofing process Back to homepage SNCB Rue de France, 56 1060 BRUXELLES Tel: 32-(0)25252111 Email: infocorporate@sncb.be –Web: www.belgianrail.be/fr/corporate Activities in the passenger transportation, in this included the welcome and the information of her clientele The acquisition, the conception, the construction, the renewal, the maintenance and the management of the railroad stations, the not guarded stop points and their dependences SNCB Mobility (in Belgium) and SNCB Europe (in Europe) Activities in workshops: SNCB Technics training institutions for train drivers and guides of train, Maintenance rolling stock Activities in the transportation of goods by rail: via subsidiaries as SNCB Freight Services Back to homepage SNCB ATELIER DE TRACTION DE CHARLEROI Rue Dupret Cambier, 61 6001 CHARLEROI Email: infocorporate@sncb.be – Web: Atelier de Charleroi The new workshop of Charleroi was inaugurated in 2000 and has an infrastructure with the most modern technologies. The mission of the workshop consists in assuring the maintenance of locomotives and electric auto engines and diesel railcars. A new hall intended for the maintenance and for the repairs to be made on the new AM Desiro is in service since December, 2011. Back to homepage SNCB ATELIER CENTRAL DE CUESMES Avenue Joseph Wauters, 124 7000 MONS Email: infocorporate@sncb.be – Web: Atelier de Cuesmes The central workshop of Cuesmes exists as railroad workshop since the end of the XIXth century. He assured since the maintenance, the repair or the modernization of diverse railway vehicles: locomotives, cars, cars, cranes and equipment’s of the service of the way. The central workshop of Cuesmes makes and also repairs components of railroad equipment. Diverse mechanical and metallic engineering’s were realized over time and are planned in the coming years. This workshop is so specialized in weld and masters among others the assemblies in special steels and aluminum. The activity of the central workshop diversifies according to the needs for the railroad activities. Specialized in cars (railroad material goods) and in maintenance of the axles until 2009, the workshop modernizes, maintains and repairs at present cars (railroad material travelers). Back to homepage SNCB ATELIER DE SALZINNES Rue Fonds des Bas-Prés 5000 NAMUR Tel: 32-(0)81252012 – Fax: 32-(0)81252010 Email: wms.management@b-rail.be - rachel.colinet@b-rail.be - Web: Atelier de Salzinnes Contact person: Mrs. Rachel COLINET The workshop exercises 3 main activities: The big electric and diesel maintenance of locomotives, with complete dismantling and revision of all its essential parts (electric engines, electronic parts, relay, bogies, axles, diesel engines, etc.); these revisions give rise to tests of parts on bench test. The revision and the repair of spare parts coming from locomotives maintained in the workshops of line distributed everywhere in Belgium. The purchase and the distribution of parts of consumption in the workshops of line Back to homepage SNCB ATELIER DE MONCEAU Rue de Marchienne, 13 6044 ROUX Tel: 32-(0)71603602 – Fax: 32-(0)71603642 Email: paolo.codutti@b-rail.be - Web: www.wagonmaintenanceservices.eu Contact person: Mr Paolo CODUTTI The main activity of WMS, Wagon Maintenance Services, consists in the maintenance of freight wagons, by their kind and use exposed to external corrosion and wear. Also transformation of wagons and construction of wagon spare parts belong to the range of our services. The coordination of the wagon maintenance takes place at the Central Services in Brussels, in the seat of NMBS Technics. The Central Services have a coordinating task between wagon holders and workshops and are in that way first contact for our customers. WMS takes care of the wagon maintenance of the NMBS freight group commercial subsidiary companies: Xpedys, TRW and IFB. Also the maintenance of the INFRABEL service Wagons takes place in our workshops. Wagons of wagon holders from all quarters of Europe are repaired in our workshops on a daily base. Many customer wagon holders choose to conclude a negotiated contract with WMS. These clients acquire a personal access to our Portal, a data base for consulting invoice details and wagon movements. Back to homepage SOCOGETRA Rue Joseph Calozet, 11 6870 AWENNE Tel: 32-(0)84366203 - Fax: 32-(0)84366513 – Mobile: 32-(0)473930370 Email: andre.duchenne@socogetra.com - Web: www.socogetra.com Contact person: Mr André DUCHENE SOCOGETRA was created in 1948 and is the Belgian market leader in the roads and civil engineering fields. SOCOGETRA has been working a lot in Belgium and in foreign countries: roads and motorways railway and high-speed trains main and branch pipework sewage treatment and environment commercial and industrial infrastructure restoration and maintenance of roads and motorways Our company has got a strong foothold in the Walloon Region, we are able to organise very quickly suitable specialised teams which are readily available and highly efficient. With our own quarries, asphalt plants and concrete plants we are able to meet all demands as far as the supplying is concerned. Thanks to a good knowledge of the environment, people and materials, we offer our numerous customers the services and advantages of a very high level partnership. Back to homepage SOGELUB Rue de la Terre à Briques, 13 7522 MARQUAIN Tel: 32-(0)69590949 - Fax: 32-(0)69214474 Email: contact@sogelub.com - christian.seront@sogelub.com - Web: www.sogelub.com Contact person: Mr Christian SERONT Innovation through research is truly our purpose For over 30 years, our aim has been to be innovative in the field of lubricants. As a designer and producer of industrial lubricants for specific use, we optimize productivity in an industrial environment. SOGELUB is active in formulating, producing, innovating and advising; all at the same time. Our production centres and laboratory, situated at the crossroads of Europe, enable us to be constantly attentive to our customers’ needs. Infrastructures: Railway, escalators, etc. The following aspects are taken into account: Penetration of the lubricant at the heart of joints, particularly in the presence of dirt (dust, sand, etc.), The lubricant’s ability to clean of dirt, Formula that meets the latest environmental standards (BIO), All-purpose in summer and winter (wide range of use). Amongst the most widely used products are: Escalators: R 605b Sp+, R 610, R 615 and R 633 ranges. Switches and guard rails: R 505 and R 830. Cranes, rolling and lift bridges cables: R 603 TM2 and R 603 TCA. Back to homepage SOMEI Rue François Dive, 74 A 5060 FALISOLLE Tel: 32-(0)71772196 - Fax: 32-(0)71761228 Email: somei.thomas@skynet.be - Web: www.somei.be Contact person: Mr Jean-Pierre THOMAS SOMEI SA is 50 years old company having a strong experience in railway equipment sales and reconditioning: shunting locomotives, lines locomotives and carriages. Our range goes from 300hp to2000 hp. We are integrating radio commanding systems, We are modifying braking systems; we are developing maintenance scheme via cellular phone etc… SOMEI SA also manufactures and sell tailor made exhaust systems of all types: Atex, catalysts, particles filters etc… Our main target is to provide a wide and complete service to railways equipment users in the respect of safety regulations applicable in that field. Feel free to contact us at any time. Back to homepage TECCONCEPT TREATMENT ENGINEERING CLEANING CONCEPT Rue Lekernay, 3 7850 MARCQ Tel: 32-(0)23953045 - Fax: 32-(0)23960529 – Mobile: 32-(0)475410437 Email: info@tecconcept.com - Web: www.tecconcept.com Contact person: Mr Bernard CLOET Washing station Back to homepage TENSEN & HUON Avenue Albert 1er, 3/1 5000 NAMUR Tel: 32-(0)81235000 - Fax: 32-(0)81740727 Email: info@tensen-huon.be - stephane.tensen@tensen-huon.be Web: www.tensen-huon.be Contact person: Mr Stéphane TENSEN Engineering consulting firm specialized in topography and in techniques of positioning Tunnels Plan view, profile in length, profile across Follow-up of execution, measured Rails Topographic accounts of existing networks Study of ways Setting-up of ways Back to homepage TERMINAL CONTAINER ATHUS TCA Rue du Terminal, 13 6791 ATHUS Tel: 32-(0)63380020 - Fax: 32-(0)63370192 – Mobile: 32-(0)473553136 Email: info@tca.be - arysmans@tca.be - Web: www.tca.be Contact person: Mr Alain RYSMANS The Athus Container Terminal: the maritime gateway of the Saar-Lor-Lux region If you have to arrange the transport of containers to or from the North Sea, the Athus Container Terminal is your ideal, innovative and highly effective logistics partner! The job of the Athus Container Terminal consists of managing the entire logistics process connected to the land transport of sea containers using the road-rail combination, between the ports of the North Sea Antwerp Rotterdam Zeebruges and its hinterland Belgian Lorraine France: Alsace and Lorraine The Grand Duchy of Luxembourg Germany: the Saar and the Rhineland Palatinate The Athus Container Terminal, a company: Ideally located! ! > In the heart of Europe managing large transport flows > 300 containers per day experienced > since 1979 ambitious > with many prospects The partner of choice for the largest world-wide shippers Back to homepage THELIS Rue de la Gare de Naninne, 35 5100 NANINNE Tel: 32-(0)81402890 - Fax: 32-(0)81402586 Email: info@thelis.be - fp@thelis.be - Web: www.thelis.be Contact person: Mr Frédéric PETERS Established in 1989, THELIS ENGINEERING is a human sized, design house specialized in embedded systems (solutions and products combining electronics and computing). Our multidisciplinary team accompanies you in your projects step by step, from ideas to solutions, from design to manufacturing. Our expertise covers 3 main fields: Electronic design and manufacturing Data processing and computation algorithms Communication systems (data transport and networking) To illustrate our deep expertise of field bus technologies we have developed various hardware and software solutions for the LonWorks platform (www.dti-be.com), used in several rail projects, especially rail stations and infrastructure. We also developed expertise in building automation, home automation, industrial automation, street lighting, energy saving, remote metering and HVAC. THELIS ENGINEERING would like to be your partner of choice and help you design and manufacture today the products that will make your success tomorrow. Our commitment is to provide you availability, flexibility, responsiveness and creativity. Our services: Technical feasibility Development and prototyping Industrialization Qualification (Test and certification) Manufacturing Maintenance Back to homepage THERMO-CLEAN WALLONIE - FRANCE NORD Chemin de Malplaquet, 6 7822 GHISLENGHIEN Tel: 32-(0)68268870 - Fax: 32-(0)68659179 Email: jessie.vanthienen@thermoclean.com - Web: www.thermoclean.be Contact person: Mr Jessie VANTHIENEN The cleaning of machine parts and accessories polluted with organic contaminations like paint, plastic, rubber, food remains, oil and grease is work for a real expert. The ThermoClean Group is one of the biggest players in the industrial cleaning market, specialised in removing all kinds of pollution to recover your valuable machine parts and components. The large capacity of the Group ensures a very short delivery time during maintenance work. Key markets: Paint industry, automotive industry and suppliers, plastic industry, food industry, refineries References: Renault MCA, Total, Frauenthal, S N W M, Valeo, CNH, Man Orga, Inéos, Bostik Back to homepage T.N. TERRASSEMENTS Allée Verte, 20 7100 SAINT-VAAST Tel: 32-(0)64225793 - Fax: 32-(0)64226347 Email: info@tntsa.be - Web: www.tntsa.be Contact person: Mr Tiziano CARDELLA TNT S.A. is a Belgian company specialized in railroad. Thanks to our qualified personnel and the use of specialized equipment’s, we are a partner recognized by numerous companies’ administrators of railroad networks in Belgium and abroad. Our services: Handling of railroad accessories Installation and renewal of railroads Realization of railroad platforms Works for the electrification of ways (installation) Pose(Installation) of prefabricated elements Installation of level crossings STRAIL ·... Back to homepage TRACTEBEL ENGINEERING Avenue Ariane, 20 1200 BRUXELLES Tel: 32-(0)27739911 Email: pierre.cerckel@gdfsuez.com - Web: www.tractebel-engineering-gdfsuez.com Contact person: Mr Pierre CERCKEL Transport As the flow of goods and people keeps growing, managers of transport infrastructure are facing new challenges. TRACTEBEL ENGINEERING can help them make transport smoother, safer and more reliable – all the while improving citizens’ quality of life. TRACTEBEL ENGINEERING applies an integrated and co-modal approach to dealing with transport issues. We start by examining your requirements, on the basis of socio-economic factors. Next, we draw up strategic plans, impact studies, cost-benefit analyses and feasibility studies. Eventually, these preparatory studies lead to the actual construction of the infrastructure project. Public rail transport TRACTEBEL ENGINEERING has strong international references for heavy rail (trains & high-speed rail) as well as light rail projects (tram). We can provide optimal solutions that incorporate all the technical and infrastructural components: civil works on land and water, electrical network design, environmental impact assessment including electro-magnetic current calculations, etc. Our engineers have built up extensive experience in the field of socio-economic studies. We will help you find a sustainable solution that weighs up the interests of all the stakeholders involved in your project. Back to homepage TRAINANCE Zoning de Tournai Ouest - Rue du Progrès, 7 7503 FROYENNES Tel: 32-(0)69254187 - Fax: 32-(0)69254123 Email: contact@trainance.be - romain.haquette@trainance.be - Web: www.trainance.be Contact person: Mr Romain HAQUETTE We offer effective solutions and adapted for: Electrification of workshops by rigid catenary or retractable catenary Interlocking system with other equipment for safety management Footbridge and working platform on train roofs Movable roof working platform to compensate gap between footbridges and train automatically fitting to any train section. Our commitment and, above all, the quality of the technical design, mainly made thanks to most advanced 3D software’s to satisfy as far as possible the maximum of criteria for use, always permit to obtain the entire satisfaction of our customers. Specialized manufacturer and supplier of equipment’s for safety and maintenance installations for Train care centres, the here presented products are well known for their high degree of security, high quality, effectiveness, ergonomics and high reliability. In rolling stock depots, maintenance of over-roof components such as pantographs or air conditioning system is daily. Secure accessibility to train roofs is an actual and major concern in the depots as so much workers and heavy tooling are involved. Risks are pervasive. Back to homepage TRAINSPORT Neustrasse, 95 4730 RAEREN Tel: 32-(0)87594444 - Fax: 32-(0)87594448 – Mobile: 32-(0)497444751 Email: info@trainsport.com - aspoden@trainsport.com - Web: www.trainsport.com Contact person: Mr Arthur SPODEN Rurtalbahn Cargo's trains call a diverse set of destinations in the European seaporthinterland. As its branches are located in Rotterdam and Antwerp, many transports begin or terminate in the aforementioned North-Sea ports. Furthermore, Rurtalbahn Cargo operates freight trains on other routes. However, the European rail freight corridors Rotterdam/Antwerp-Aachen-Berlin-Warsaw, Zeebrugge/Antwerp/RotterdamDuisburg-Basle-Geneve, Hamburg-Innsbruck-Palermo form the focus of Rurtalbahn Cargo's operations and are used to a large extend. Rurtalbahn Cargo's rail freight services can be summed up as follows: •Creation and optimization of custom-made logistical concepts •Scheduling and operating national and international shuttle trains and car-setsystems •Border-crossing traction of shuttles in Germany, Belgium and the Netherlands, as well as in other countries in cooperation with corporate partners. Please refer to an overview of our transport routes… Back to homepage TRANSURB TECHNIRAIL Rue Fond des Bas Prés, 1 5000 NAMUR Tel: 32-(0)81255654 – Mobile: 32-(0)477666403 Email: contact@transurb.com - y.gilis@transurb.com - Web: www.transurb.com Contact person: Mr Yannick GILIS TRANSURB TECHNIRAIL Rue Ravenstein, 60/18 1000 BRUXELLES Tel: 32-(0)25485311 - Fax: 32-(0)25139419 Email: e.deblon@transurb.com - e.dawans@transurb.com - Web: www.transurb.com Contact persons: Mr Etienne DEBLON - Mr Emmanuel DAWANS Integrated railway & urban transport solutions TRANSURB TECHNIRAIL is a Belgian limited liability company of land transport-oriented services, pooling the experience and resources of its shareholders: The Belgian Railways Group of Companies (SNCB) The Brussels’ Mass Transport Company (STIB) As a result, we have exclusive access to the best qualified specialists, totaling more than 2.000 engineers and technicians. Moreover, we have access to the equipment, systems, hardware and software which allowing us to guarantee the best solutions for our customers. We offer tailor-made solutions in railway and urban transport, covering all the fields and activities. Fields We have developed specializations in all areas related to the development of rail and urban transport infrastructure, from the basic civil engineering up to highly specialized techniques. We offer a wide range of Driving Simulators, for trains, metros, trams and buses. A simulator is a powerful tool to train students in basic operations (e.g. drivers checklists, standard driving skills & platform duties), as well as in Advanced driving techniques (e.g. defect handling, coupling/uncoupling and other procedures in abnormal situations). We are able to assist in every specialized mechanical area. We have the skills to combine techniques and integrate these in an overall working system, managing the interfaces from the design to implementation phase. 7 major domains: Infrastructure | Signaling & Telecommunications | Rolling Stock | Information Systems | Mechanical & Electrical Systems | Stations & Real Estate | Advanced Training & Driving Simulators Back to homepage TWIN DISC INTERNATIONAL Chaussée de Namur, 54 1400 NIVELLES Tel: 32-(0)67887211 – Fax: 32-(0)67887333 Email: tdbelgium@twindisc.com - Web: www.twindisc.com Contact person: Mr Jean-Pierre PARMENTIER Twin Disc is the leader designer, manufacturer and distributor of power transmission equipment Industrial Products While there are varying demands for particular applications, each application has a constant set of criteria that must be met - speed, agility and reliability. We know that Twin Disc products are critical links in a machine's or vehicle's powertrain, as well as to its overall performance and value to its operator. Therefore, our products must deliver the right amount of power on command, under all conditions, time and time again. Coupling, clutch Back to homepage UDF AUTOMOTIVE BELGIUM Rue de Fexhe Slins, 65 B 4680 HERMEE Tel: 32-(0)42899900 – Fax: 32-(0)42899909 Email: vincent.dicarlo@udf.be - Web: www.udf.be Contact person: Mr Vincent DI CARLO Renovation of brake for railways Back to homepage UNISTEEL Rue du Panier Vert, 70 1400 NIVELLES Tel: 32-(0)67893300 – Fax: 32-(0)67893303 Email: trading@unisteel-group.com - alorenzon@unisteel-group.com Web: www.unisteel-group.com Contact person: Mr Angelo LORENZON A steel trading leader A family based group founded in Brussels in 1980. Since the beginning, it has successfully been involved in the steel world providing its customers and suppliers a full range of steel products and services: international trading, shipping, warehousing, transformation and financing. Parts of railroad Back to homepage URBA-STYLE Rue des Sablières, 16 7522 BLANDAIN Tel: 32-(0)69672626 – Fax: 32-(0)69672627 Email: info@urbastyle.com - bart@urbastyle.com - Web: www.urbastyle.com Contact person: Mr Bart LAROY Urban furniture Concrete paving stones (platform) Back to homepage USIMAINTENANCE Rue de l'Industrie, 2 4530 VILLERS-LE-BOUILLET Tel: 32-(0)42594943 – Fax: 32-(0)42594944 – Mobile: 32-(0)473855948 Email: contact@usimaintenance.be - secretariat@usimaintenance.be Web: www.usimaintenance.be Contact person: Mr Pierre SIMON USIMAINTENANCE is a leader in babbitt lining by static casting or white metal centrifuging, using tin or lead with antimony and copper, for the production or repairing of bearings, brushings, hydrostatic gearboxes, gliders, ball bearings cylinder rails, piston rails, etc. Back to homepage UWE – CELLULE MARKETING Chemin du Stockoy, 3 1300 WAVRE Tel: 32-(0)10471940 – Fax: 32-(0)10453343 Email: info@uwe.be - philippe.patte@uwe.be - Web: www.uwe.be Contact person: Mr Philippe PATTE International Marketing Unit The mission of the International Marketing Unit of the UWE (Walloon Business Federation) is to boost Wallonia's foreign trade by bringing together providers of goods and services operating in the same field of activity (clusters). The action is supported by a leading company in the chosen sector (sponsor). Advantages of our methodology : For Walloon companies, which are generally recommended by the sponsors, the Unit helps to increase turnover via new export markets. The Unit's approach creates a technologically enabling corporate environment, paving the way to outlets that would normally be inaccessible to companies on their own. For foreign buyers, the Unit's operations seek to diversify their suppliers, improve their sourcing opportunities and discover new technological options. For sponsors, the Unit is committed to preserving their image in Belgium and abroad, while helping to place their suppliers on a more stable footing, lending support in increasing turnover and fine-tuning quality in the light of international benchmarks. Since its creation, the International Marketing Unit has developed 17 clusters and is continuing to add new ones. It has carried out 157 missions in 49 countries, with an average of eight companies per mission. Back to homepage VALDUNES BELUX Quai Greiner, 1/2 4100 SERAING Tel: 32-(0)43388311 – Fax: 32-(0)43388329 Email: info@ghh-valdunes.com - patrick.marchettini@ghh-valdunes.com Web: http://ghh-valdunes.com Contact person: Mr Patrick MARCHETTINI The group GHH-VALDUNES thrives to bring you reliable, innovative and flawless products and services. We are inspired by the following Vision: We bring you innovative solutions and strategic alliances. We support you in all relevant aspects of wheel set technology for a costefficient and worry-free operation. We are with you whenever you need us. The railway industry is today in the middle of a period rich of changes and opportunities. Let's seize together the best of them. GHH-VALDUNES Group is the European leader for the production and sales of wheels, axles, wheel sets for the rail industry. The Group offers a complete portfolio of products, from tramways and metros to high speed trains, including freight, heavy haul, passenger main lines, EMUs and DMUs and locomotives. Back to homepage VIRTUAL TECHNOLOGIES Rue Saint-Denys, 63 5330 SART-BERNARD Tel: 32-(0)81401147 – Fax: 32-(0)81413955 Email: ph.derenne@skynet.be Contact person: Mr Philippe DERENNE Software of training (simulator by computer generated images) for rail transportation (trains, streetcars, subway) or route (heavy trucks bus): for the drivers for the staff of maintenance of equipment’s Back to homepage VLUX Route de Yernée, 1 4480 CLERMONT-SOUS-HUY Tel: 32-(0)85313920 – Fax: 32-(0)85314218 – Mobile: 32-(0)498883100 Email: cj@vlux.com - Web: www.vlux.com Contact person: Mr Cyril JOSSET Lighting Emergency lighting Project lighting Back to homepage WATELET GERARD Rue Hilaire Bertinchamps, 17 5060 TAMINES Mobile: 32-(0)475427658 Email: contact@trencostudies.be - Web: www.trencostudies.be Contact person: Mr Gérard WATELET Office of studies in railroad tourism Back to homepage WOIT (NOUVELLE SOCIETE) Rue Pépin de Herstal, 2 4040 HERSTAL Tel: 32-(0)42641522 - Fax: 32-(0)42481121 – Mobile: 32-(0)42481121 Email: info@woit.be – Web: www.woit.be Contact person: Mr Didier MEUNIERX Parts in cupro-aluminum for catenaries Back to homepage WÜRTH INDUSTRY BELUX Rue de l’Aéropostale, 8 4460 GRACE-HOLLOGNE Tel: 32-(0)42479611 - Fax: 32-(0)42475821 – Mobile: 32-(0)475451207 Email: info@wurth-industry.be - claude.dengis@wurth-industry.be Web: www.wurth-industry.be Contact person: Mr Claude DENGIS The mission of Würth Industry Belgium is to provide our customers with consistent high quality products, engineering and value added services to reduce both their total costs and their risk by partnering with a financially solid source of supply. We provide high quality fasteners, assembly and MRO products to over 1.100 active customers in the manufacturing, truck, agricultural equipment, electronics, railcar, construction and equipment industries. We specialize in the creation and management of Vendor Managed Inventory programs for C-Parts and MRO products for industrial customers. We currently have programs in place serving a wide range of customers and markets. Würth Industry in Belgium and Luxemburg, your partner for a secure future! Bolt (nut) for fixation of railroad Back to homepage WUST (ETABLISSEMENTS JEAN) Route de Falize, 151 4960 MALMEDY Tel: 32-(0)80792711 - Fax: 32-(0)80792812 Email: commercial@wust.be - Web: www.wust.be Contact person: Mr Robert LEPLAT Construction of buildings Architecture, design, engineering, environment Back to homepage YDETEC ELECTRONICS Rue Révioux, 2 6210 REVES Tel: 32-(0)71842442 - Fax: 32-(0)71844224 – Mobile: 32-(0)473670238 Email: sales@ydetec.be – Web: www.ydetec.be Contact person: Mr Vincent VANDEN HERREWE We are specialized in the electronics of power and in the electromechanical engineering. Our mission is to represent the know-how of the international manufacturers on our market. We attempt to present the most advanced technologies, in domains such as the railroad industry, the aeronautics, the communications and the management of the energy. Back to homepage YVAN PAQUE (ETABLISSEMENTS) Rue de l'Arbre Courte-Joie, 48 4000 LIEGE Tel: 32-(0)42247724 - Fax: 32-(0)42247705 Email: yvan.paque@paque.be – Web: www.paque.be Contact person: Mr Dominique SCHERPENBERGS YVAN PAQUE S.A. has carved its reputation as a truly outstanding company in the field of light. For almost forty years, the company has been studying and developing techniques such as street lights, traffic lights, boundary lights and road signs. Its growing know-how has helped to win renown by lighting roads, motorways, tunnels, airports, bridges, constructive works, a.o. YVAN PAQUE S.A. is a recognized industry leader with extensive experience which has strategically placed itself as one of the frontrunners of the lighting technology market, in Belgium first and then in the whole Europe. Since its creation, YVAN PAQUE S.A. has handled construction and maintenance of electric, electromechanical and electronic fittings along roads and motorways in many Belgian provinces. YVAN PAQUE S.A. also benefits from its sub companies who are specialized in various fields and categories consisting of: Electric signalling works on railways; Fibre optic cable blowing and jetting; Optical telecom cables jetting; Laying of underground and overhead cables; Electromechanical fittings of highway tunnels and constructive works; Construction and maintenance of water and air pollution control devices; Motorways traffic supervision by means of cameras and lighting signalling boards with variable values; Renewing of airport boundary lights; Construction and fitting of cellular phones cell sites in Belgium; Study and realization of electric work of infrastructures; Installation of signalling equipment on temporary work sites. Back to homepage
