EC Declaration of Performance Declaration number: Friday 14th December 2012. Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9th March 2011 Council Directive 89/106/EEC 1. Unique identification code of the product-type As information accompanying the CE marking dated 14th December 2012 2. Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to article 11(4) As information accompanying the CE marking dated 14th December 2012 3. Intended use or uses of the construction product in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer. Metal framing components within building construction works in conjunction with gypsum plasterboard where the assembly is non-load bearing. 4. Name registered trade mark and contact address of the manufacturer as required pursuant to article 11(5) SIG Trading Ltd, Hillsborough Works, Sheffield, S6 2LW 5. Where applicable name and contact address of the of the authorised representative whose mandate covers the tasks specific in article 12(2) Not Applicable 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in annex V System 4 – Declaration of the performance of the essential characteristics of the construction product by the manufacturer on the basis of the following items: (a) the manufacturer shall carry out: (i) determination of the product-type on the basis of the type testing, type calculation, tabulated values or descriptive documentation of the product; (ii) factory production control (b) no tasks for the notified body 7. In case of the declaration of performance concerning a construction product covered by a harmonised standard: Not applicable 8. In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued: Not applicable 9. Declared Performance Essential Characteristics Specification (see note 1) Performance (see note 2) Harmonised Technical (see note 3) Reaction to Fire A1 BS EN 14195 : 2005 Flexural Strength NPD BS EN 14195 : 2005 Where pursuant to Article 37 or 38 the Specific Technical Document has been used, the requirements with which the product complies: Not applicable 10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Andy Holmes Commercial Director ………………………………………….. SIG EC Declaration of conformity CE Marking Products within the scope of this declaration Description C Studs 43mm C Stud 48mm C Stud 50mm C Stud 50mm C Stud 60mm C Stud 70mm C Stud 73mm C Stud 75mm C Stud 92mm C Stud 146mm C Stud HD C Studs 70mm HD C Stud 146mm HD C Stud I Studs 50mm I Stud 60mm I Stud 70mm I Stud 92mm I Stud 146mm I Stud Acoustic Studs 70mm AC Stud 92mm AC Stud Code Thickness Cross Section Designation Drawing Reference ES43 SPS48 SPS50 SPS50H PS60 SPS70 PS73 PS75 SPS92 SPS146 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm C/38/43/40 C/32/48/34 C/32/50/34 C/32/50/34 C/32/60/34 C/32/70/34 C/32/73/34 C/32/75/34 C/32/92/34 C/32/146/34 ES43 SPS48 SPS50 SPS50H PS60 SPS70 PS73 PS75 SPS92 SPS146 PSHD70 PSHD146 0.7mm 0.7mm C/32/70/34 C/32/146/34 PSHD70 PSHD146 PI50 PI60 PI70 PI92 PI146 0.6mm 0.6mm 0.7mm 0.9mm 0.9mm I/38/50/38 I/38/60/38 I/38/70/38 I/38/92/38 I/38/146/38 PI50 PI60 PI70 PI92 PI146 AS70 AS92 0.5mm 0.5mm C/34/70/36 C/34/92/36 AS70 AS92 Sheet 1 of 4 SIG EC Declaration of conformity CE Marking Products within the scope of this declaration Description Code Thickness Cross Section Designation Drawing Reference Tracks 45mm Std Track 50mm Std Track 52mm Std Track 52mm Deep Track 52mm Ex Deep Track 62mm Std Track 62mm Deep Track 62mm Ex Deep Track 72mm Std Track 72mm Deep Track 72mm Ex Deep Track 72mm Long Leg Track 75mm Std Track 75mm Deep Track 75mm Ex Deep Track 77mm Std Track 77mm Ex Deep Track 94mm Deep Track 94mm Ex Deep Track 94mm Long Leg Track 148mm Deep Track 148mm Ex Deep Track PT45 SPT50 SPT52 SPDT52 SPEDT52 PT62 PDT62 PEDT62 SPT72 SPDT72 SPEDT72 SPXDT72 PT75 PDT75 PEDT75 PT77 PEDT77 SPT94 PEDT94 PXDT94 SPT148 SPDT148 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.7mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.5mm 0.7mm 0.7mm 0.5mm 0.5mm U/25/45/25 U/25/50/25 U/25/52/25 U/32/52/32 U/50/52/50 U/25/62/25 U/32/62/32 U/50/62/50 U/25/72/25 U/32/72/32 U/50/72/50 U/70/72/70 U/25/75/25 U/32/75/32 U/50/75/50 U/25/77/25 U/50/77/50 U/32/94/32 U/50/94/50 U/70/94/70 U/32/148/32 U/50/148/50 PT45 SPT50 SPT52 SPDT52 SPEDT52 PT62 PDT62 PEDT62 SPT72 SPDT72 SPEDT72 SPXDT72 PT75 PDT75 PEDT75 PT77 PEDT77 SPT94 PEDT94 PXDT94 SPT148 SPDT148 Sheet 2 of 4 SIG EC Declaration of conformity CE Marking Products within the scope of this declaration Description Code Thickness Cross Section Designation Drawing Reference SPXDT148 0.7mm U/70/148/70 SPXDT148 PB 0.7mm U/6/96/6 PB SWL507 SWL60 0.5mm 0.5mm C/18/45/18 U/18/19/28 SWL507 SWL60 SSMF5 SSMF6A SSMF7 0.5mm 0.5mm 0.7mm W/10/26/51/26/10 U/19/26/28 U/15/45/15 SSMF5 SSMF6A SSMF7 SL02 SL04 SSL06 SL12 SL13 SL26 0.8mm 0.8mm 0.8mm 0.8mm 0.8mm 1.5mm L/19/19 L/22/22 L/25/25 L/50/25 L/50/50 L/50/50 SL02 SL04 SSL06 SL12 SL13 SL26 Tracks (continued) 148mm Long Leg Track Partition Brace Partition Brace Wall & Ceiling Liner Wall & Ceiling Liner Perimeter Track MF Ceiling Furring Perimeter Channel Primary Channel Angles 19 x 19 Angle 22 x 22 Angle 25 x 25 Angle 50 x 25 Angle 50 x 50 Angle 50 x 50 Angle Sheet 3 of 4 SIG EC Declaration of conformity CE Marking Products within the scope of this declaration Description Code Thickness Cross Section Designation Drawing Reference Wall Furring Wall Furring WF559 0.5mm W/8/10/38/10/8 WF559 Resilient Bar Resilient Bar RB565 0.5mm W/9/45/17/19 RB565 Date 14th December 2012 Issue B Speedline Sheet 4 of 4