JKM’s JOURNALS
No
Title
Name
No
Prof Madya Dr Mujahid
Title
Name
Prof Madya Dr Mujahid
1
Introduction to Lean
Construction (Book)
I.AbdulRahman, A.H.Memon and
A.M.AhmadZaidi(2011),Penerbit
UTHM, (ISBN 978-967-5457-56-2).
9
A Review of An Armour
Protection Technology for the
Future
Light
Armoured
Vehicle for the Malaysian
Army,
2
Development
of
Microcontroller-Based
Inverter Control Circuit
Residential
Wind
Generator Application,
A.F.AhmadZaidi,
RizaMuhida,
A.M.AhmadZaidi, S.Yaacob and
N.H.AhmadZaidi (2010), Journal of
Science & Technology, Vol.2, No.1
[ISSN: 1985-8809].
10
Numerical Simulation Study
on Early Stage Scabbing
Occurrence on Concrete
Targets Subjected to Local
Impact Loading,
3
Numerical
Simulation
Study on Lateral Collapse
of
Kenaf-Foam
Composite
Filled
in
Cylinderical
Tube
Subjected to Dynamic
Loading,
A.M.AhmadZaidi, L.L.Goh and
A.F.AhmadZaidi (2010), Journal of
Science & Technology, Vol.2, No.1
[ISSN: 1985-8809].
11
Modelling of 12-DOF EightWheeled Armored Vehicle
(8WAV) Due to Reaction
Force at the Weapon
Platform,
4
The
Sintering
Temperature Effect on
the Shrinkage Behavior
of Cobalt Chromium
Alloy
12
Preliminary
Study
of
Compressed Stabilized Earth
Brick (CSEB),
5
Study on the Analytical
Behaviour of Concrete
Structure Against Local
Impact of Hard Missile,
International
M.GhazaliKamardan,
N.HidayahA.Zaidi, M. Noh Dalimin,
A.Mujahid
A.
Zaidi,
S.BahrinJamaludin
and
M.MahadiM.Jamil (2010), American
Journal
of
Applied
Science,
Vol.7(11), [ISSN: 1546-9239].
A.M.AhmadZaidi, I.AbdulRahman
and A.I.L. QadirBux (2010), Journal
of
Sustainable
Construction
Engineering & Technology, Vol.1,
No2 [ISSN: 2180-3242].
13
Study
on
Dynamic
Characteristics of Coconut
Coir Fibre Reinforced with
Polyurethane,
6
Empirical
Formula
Prediction on Critical
Impact
Energy
for
Perforation Phenomena
on Concrete Structures
A.I.L.QadirBux, I.AbdulRahman and
A.M.AhmadZaidi (2011), Journal of
Mathematics Research, Vol.3, No.1
[ISSN: 1916-9795 (Print) 19169809(Online)].
14
Study on Mechanical and
Vibration Characteristics of
Coconut Coir Fibre Reinforced
With Polyurethane,
7
Empirical
Formula
Prediction on Critical
Impact
Energy
for
Scabbing Phenomena on
Concrete Structures,
.Abdul Rahman, A.M.AhmadZaidi,
A.I.L.QadirBux
and
M.Y.Ismail
(2011), Applied Physics Research,
Vol.2, No.2 [ISSN: 1916-9639 (Print)
1916-9647(Online)].
15
Mechanical Properties of
Hybrid Steel Fibre Reinforced
Concrete
with
Different
Aspect Ratio,
8
Study on Behaviour of
Foamed Concrete under
Quasi Static Indentation
Test,
M.Z.A.AbdulRahman,
I.AbdulRahman
and
A.M.AhmadZaidi(2011), European
Journal of Scientific Research,
Vol.51, No.3 [ISSN: 1450-216X].
16
Simulation Study on Effect of
Diameter and CRH ratio of
Ogive Nose Hard Missile on
Required Critical Impact
Energy for Penetration of
Concrete Targets
S.Abdullah, N.Mohamad Nor,
A.M.AhmadZaidi,
K.H.Kamaruddin
and
K.AbdulJalil (2011), The Journal
of Defence and Security, Vol.2,
No.1 [ISSN: 2180-284X].
A.M.AhmadZaidi, Q.M.Li, S.
Abdullah, N.Mohammad Nor,
Z.AbdKadir,
K.AbdulJaliland
K.H.Kamaruddin (2011), The
Journal of Defence and
Security, Vol.2, No.1 [ISSN:
2180-284X].
Z.AbdKadir,
K.Hudha,
S.Abdullah, M.F.MohdYusoff,
K.AbdulJalil, A.M.AhmadZaidi
(2011), The Journal of Defence
and Security, Vol.2, No.2 [ISSN:
2180-284X].
FetraVennyRiza,
I.AbdulRahman
and
A.M.AhmadZaidi
(2011),
Australian Journal of Basic &
Applied Sciences (In press)Indexed
by
Thomson
Reuters(ISI)/SCOPUS.
B.AnamalaiGurunathan,
A.M.AhmadZaidi, N.A.Mohd
Adnan, N.Arsat, O.K.Khim,
N.Mohamad
Nor,
R.
MohdSohaimi (2011), Modern
Applied Science (In-press),
Indexed by SCOPUS.
N.A.Mohd Adnan, N.Arsat,
F.Mat Nor, A.M.AhmadZaidi,
B.AnamalaiGurunathan,
N.Mohamad Nor, O.K.Khim and
R.MohdSohaimi
(2011),
Modern Applied Science (Inpress), Indexed by SCOPUS.
M.A.Yusof, N.Mohamad Nor,
M.F.MuhamadZain, N.C.Peng,
A.Ismail, R.MohdSohaimi and
A.M.AhmadZaidi
(2011),
Australian Journal of Basic and
Applied Sciences (In-press),
Indexed
by
Thomson
Reuters(ISI)/SCOPUS.
I.AbdulRahman,
Q.L.A.ImranLatif, A.M. Ahmad
Zaidi, N. Mohamad Nor,
S.Abdullah
(2011),
International
Review
on
Modellling and Simulations (inpress), Indexed by SCOPUS.
Dr Dian Darina Indah Daruis
Prof Madya Dr Risby Mohd Sohaimi
1
Modeling Ballistic Impact
(Chapter 9), Computer
Technology for Textiles
and Apparel, (Ed. Jinlian
Hu), (BOOK)
M.S Risby, A.M.S Hamouda,
Woodhead Publishing Limited/CRC
Press, Abington Hall, Cambridge,
CB1 6AH, England. ISBN 1-84569729-4 (Accepted For Publication in
22011)
A.R. Khairul, S.M.Sapuan, M.S.
Risby,A.Khalina, A.M.S. Hamouda;
Research
in
Natural
Fibre
Reinforced Polymer Composites (Ed.
SapuanSalit), ISBN 978-967-344002-3, Publisher Universiti Putra
Malaysia Press, Publication Date:
2009
1
A Survey on Sleeping Pattern
and Fatigue among Pilots in
South East Asia
Baba MdDeros, Dian Darina
Indah
Daruis&NuhmandeenBahurude
en (2011) Applied Mechanics &
Materials, vol 58-60: 715-721
2
Low Velocity Impact
Properties of Kenaf and
Ramie
Composites,
Chapter 15: (BOOK)
2
Relationship
Between
Objective And Subjective
Methods In Evaluating Static
Discomfort Of Car Driver Seat
Modeling Ballistic Impact
(Chapter 3), Lightweight
Ballistic
Composites:
Military
and
LawEnforcement
Applications,
Ed.
Bhatnagar, (BOOK)
Water resource studies
on the impact of landuse changes for the Hulu
Kinta Catchment, (BOOK)
A.M.S Hamouda, M.S Risby,
Woodhead Publishing Limited/CRC
Press, Abington Hall, Abington,
Cambridge, CB1 6AH, England, ISBN
1-85573 941-0. Publication Date:
June 2006
3
Work-Related
Musculoskeletal
Disorders
among Workers’ Performing
Manual Material Handling
Work in an Automotive
Manufacturing Company.
Md.
AzlinMd
Said,
Shafik
Mohammad
Anas,
RisbyMohdSohaimi
,1999UniversitiSains Malaysia, ISBN
M001889,
4
Integration of Comfort into a
Driver’s Car Seat Design Using
Image Analysis.
5
Field Blast Testing using
High
Speed
Data
Acquisition
Systemfor
Hybrid
Steel
Fiber
Reinforced
Concrete
Panel,
5
Work Posture and Back Pain
Evaluation in a Malaysian
Food
Manufacturing
Company.
6
Development of Blast
Resistance
Concrete
Panel,
Alias, M.Y., Norazman, M.N., Arifin,
I., M.S Risby.,Ng. C.P,. 2010,
European Journal of Scientific
Research
ISSN 1450-216X Vol.44 No.4 ,
pp.585-595
(Indexed in Scopus)
M.Alias
Yusuf,
Norazaman
Mohammad Nor, Ariffin Ismail,
Risby M.S, Ng C.P , 2010, Journal of
Defense and Security (MIDAS), Vol 2
Daruis, D.D.I, Deros, B.M., Nor,
M.J.M., HosseiniFouladi, M.
2010 ICMAE 2010 KL (ICMAE
2010 conference and will be
included in the IEEE Xplore, and
indexed by the EiCompendex
and Thomson ISI (ISTP).IEEE
Catalog Number: CFP1047LPRT ISBN: 978-1-4244-8770-7)
Baba Md. Deros, Dian Darina
Indah Daruis, Ahmad Rasdan
Ismail, Nurfarhana Abdullah
Sawal and Jaharah A. Ghani.
2010. American Journal of
Applied Sciences 7(8): 10871092. ISSN 1546-9239
DarlianaMohamad,
Baba
MdDeros, Dzuraidah Abdul
Wahab, Dian Darina Indah
Daruis and Ahmad Rasdan
Ismail. 2010 American Journal
of Applied Sciences 7 (7): 937942
Baba Md. Deros, Dian Darina
Indah Daruis, Ahmad Rasdan
Ismail and Ahmad Rifqi Abdul
Rahim. 2010. American Journal
of Applied Sciences 7 (4): 473479
3
6
Malaysian
sitting
anthropometry for seat fit
parameters.
7
Response of Steel fibers
Reinforce Concrete Panel
subject to blast loadings,
Zulfaqar
M.Alias
Yusuf,
Norazaman
Mohammad Nor, Ariffin Ismail,
Risby M.S, Ng C.P, 2009, Journal:
Asian Defence And Security, Vol 1
7
Evaluation of Car Seat Using
Reliable and Valid Vehicle
Seat Discomfort Survey.
8
Ballistic Performance of
Coconut
Shell
Powder/Twaron Fabric
against
Non-armour
Piercing Projectiles,
M.S. Risby, S.V. Wong, A.M.S.
Hamouda, A.R. Khairul, M. M.
Elsadig 2008, Defence Science
Journal, Vol 58, No 2
(No. of Citation =1,Indexed in
Scopus & ISI, Impact Factor = 0.237)
8
Understanding the effect of
noise, vibration and seat
discomfort
towards
a
passenger’s vehicle driver
through self-reported survey.
4
D. Daruis, B. Deros and M. Nor.
2010. Human Factors and
Ergonomics in Manufacturing &
Service
Industries.
21(3).
Published online 29 Nov 2010
DOI: 10.1002/hfm.20237
Baba MdDeros, Dian Darina
Indah
Daruis&MohdJailaniMohd Nor.
2009. Industrial Engineering
and Management Systems
(IEMS) 8(2): 121-130.
Dian Darina Indah Daruis, Baba
MdDeros&MohdJailaniMohd
Nor, 2008. Journal Teknologi,
49(A): 39–53.
Brig General Prof Madya Dr Shohaimi Abdullah
1
‘Review
Of
Armour
Protection Technology For
The Future Light Armoured
Vehicles’
Shohaimi
Abdullah*,
KhairulHasni,
NorazmanMohamad Noor,
Ahmad Mujahid, Ahmad Zaidi,
ZulkiffliAbdKadir,
RisbyMohdSuhaimi ;The Journal
of
Defence and Security, Vol 2 No 1,
2011
7
‘A Trajectory Prediction for
Segmented Projectiles Using
CFD Codes’,
Joanna Szmelter, Shohaimi bin
Abdullah, Journal of Battlefield
Technology, Vol 2, No 2, (Pages
1 – 9) July 1999.
2
‘The Relationship Between
Training Assignments, Feel
Importance And Training
Motivation: A Study In A
Military Training Academy’
8
‘Improving the Protection of
Armoured Personnel Carrier
Against the Kinetic Energy
Threat’.
Shohaimi Abdullah, John G
Hetherington, David Leeming.
Science International (Lahore),
10(4), Pages 349 – 356, 1998
3
‘Numerical
Simulation
Study In Early Scabbing
Occurrence On A Concrete
Target Subjected To Local
Impact Loading’
9
’Penetration Performance of
Segmented
Rods
–
Comparison with Continuous
Rods at High Velocity’,
Shohaimi Abdullah, John G
Hetherington David Leeming,
Journal
of
Battlefield
Technology, Vol 1, No 1, (pages
4 – 8) March 1998.
4
‘An Overview On Recent
Developments Of Body
Armour’
10
‘The Armed Forces Academy;
Centre of Excellence in the
Defence
Technology
Research, and Teaching,
Lt Col Shohaimi Abdullah and
MajNorazmanMohd
Noor,
Sorotan Darat, Dec 1999.
5
‘Modeling And Pid-Based
Feedback Control Of Gun
Control
System
For
Improving Eight-Wheeled
Armored Vehicle (8wav)
Dynamics Performance In
Roll And Pitch Motions
During Firing’,
Azman
Ismail*,
NurhanaMohamadRafiuddin,
Shohaimi Abdullah and
Muhammad ZulfadhlizamGhazali;
The Journal of Defence and
Security, Vol 2 No 1, 2011.
Ahmad
Mujahid
Ahmad
Zaidi1,2*, Qing Ming Li3,
Norazman Mohammad Nor5,
Shohaimi Abdullah, ZulkiffliAbd
Kadir6, Khalid Abdul Jalil5 and
KhairulHasni
Kamaruddin;
The Journal of
Defence and Security Vol 2 No1,
2011.
Lim
Yan
Yik,
MegatMohamadHamdan
Bin
Megat Ahmad, Ahmad Mujahid
Bin Ahmad Zaidi, MohdYuhazri
Bin Yaakob, Shohaimi Bin
Abdullah,
Risby
Bin
MohdSohaimi&Puvanasvaran A/L
A. Perumal ; Accepted for
publication in the Journal of
Defence and Security, Vol 2 No2,
2011.
ZulkiffliAbd Kadir1*, Khisbullah
Hudha2, Shohaimi Abdullah3,
MohdFazliMohd Yusoff4, Khalid
Abdul Jalil5, Ahmad Mujahid
Ahmad
Zaidi6,
KhairulHasniKamaruddin,
MohdAzzeriMd
Naiem7
;
Accepted for publication for the
Journal of Defence and Security,
Vol 2 No2, 2011.
6
‘Simulation
Study on Effect
of
Diameter
and CRH ratio
of Ogive Nose
Hard Missile on
Required
Critical Impact
Energy
for
Penetration of
Concrete
Targets’
Ismail Abdul Rahman1, QadirBux
alias Imran Latif2, Ahmad
Mujahid
Ahmad
Zaidi3,
NorazmanMohamad
Nor4,
5
Shohaimi Abdullah
International Review
on Modelling and
Simulations
(I.RE.MO.S.),Vol. xx,
n. x
June 2008
11
‘CadanganMemformalisasikan
OrganisasiPembelajaran
di
DalamTenteraDarat
Malaysia’,
12
Comparison in between good
and oxidized leadframe: A
study in package delamination
analysis,
Lt KolDrShohaimi Abdullah,
SorotanDarat Dec 2001.
S.Abdullah,
M.F.Abdullah,
A.K.Ariffin,
M.N.Baharin&Z.A.Aziz, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 222-231
13
Low looping challenges in
the QFN wire binding
process,
S.Abdullah,
Z.A.Aziz,
I.Ahmad&M.F.Abdullah, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 25-32
15
Gold wire neck strength on
diferrent
combination
of
looping parameter,
S.Abdullah,
Z.A.Aziz,
I.Ahmad&M.F.Abdullah, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 232-239
14
Step cut for dicing laminated
wafer in a QFN package,
S.Abdullah, S.M.Yusof, A.Jalar,
M.F.Abdullah, Z.A.Aziz&R.Daud,
2008, J. Solid state science
&technology, Vol 16, No.2, 2008,
pp. 198-206
16
Effect of looping formation in
wire sweeping problem of a
newly developed QFN package,
S.Abdullah,
Z.A.Aziz,
I.Ahmad&M.F.Abdullah, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 247-254
En Mohamad Faizal bin Abdullah
1
Hardness Test on an Epoxy
Mold Compounds of a
Quad Flat No Lead Package
Using the Depth Sensing
Nanoindentation.
S. Abdullah, M. F. M. Yunoh , A.
Jalar, and M. F. Abdullah.
Advanced Materials Research.
146-147 (2011): 1000-1003
8
Copper leadframe analysis
using
thermomechanical
approach,
S.Abdullah,
M.F.Abdullah,
A.K.Ariffin,
S.Yusof,
R.Daud&Z.A.Aziz, 2008, J. Solid
state science & technology, Vol
16, No.2, 2008, pp. 164-172
2
Durability Assessment of
Quad Flat No-Lead Package
Using Signal Analysis.
M.F.M. Yunoh, S. Abdullah, A.
Jalar, L. Abdullah and M.F.
Abdullah.
Key
Engineering
Materials. 462-463 (2011): 236240
9
Comparison in between good
and oxidized leadframe: A
study in package delamination
analysis,
S.Abdullah,
M.F.Abdullah,
A.K.Ariffin,
M.N.Baharin&Z.A.Aziz, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 222-231
3
Failure Analysis of a
Semiconductor Packaging
Leadframe Using the Signal
Processing Approach.
Shahrum
Abdullah,
MohamadFaizal
Abdullah,
Ahmad Kamal Arifin, Che Ku Eddy
Nizwan, MohdFaridz Mod Yunoh
and
AzmanJalar.
2010.
International Journal of Modern
Physics B (IJMPB), 24(1-2): 175182
10
Low looping challenges in the
QFN wire binding process,
S.Abdullah,
Z.A.Aziz,
I.Ahmad&M.F.Abdullah, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 25-32
4
The effect of leadframe
oxidation of a quad flat nolead semiconductor package
under cyclic loading,
S. Abdullah, M. F. Abdullah, A. K.
Ariffin, 2008, Journal of Applied
Sciences, Vol. 8, 9, pp. 1676-1683.
11
Step cut for dicing laminated
wafer in a QFN package,
S.Abdullah, S.M.Yusof, A.Jalar,
M.F.Abdullah, Z.A.Aziz&R.Daud,
2008, J. Solid state science &
technology, Vol 16, No.2, 2008,
pp. 198-206
5
Thermal-Mechanical
Analysis of a Different Lead
frame
Thickness
of
Semiconductor
Package
under the Reflow Process.
S. Abdullah, M.F. Abdullah, A.K.
Ariffin and A. Jalar. 2009. American
Journal of Applied Sciences 6(4):
616-625
12
Gold wire neck strength on
diferrent
combination
of
looping parameter,
S.Abdullah,
Z.A.Aziz,
I.Ahmad&M.F.Abdullah, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 232-239
6
Effect
of
Leadframe
Oxidation on the Reliability
of a Quad Flat No-Lead
Package,
S. Abdullah, M.F. Abdullah, A.K.
Ariffin and A. Jalar, 2009,
ASME,Journal
of
Electronic
Packaging 131: 031002-1 031002-7
13
Effect of looping formation in
wire sweeping problem of a
newly developed QFN package,
S.Abdullah,
Z.A.Aziz,
I.Ahmad&M.F.Abdullah, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 247-254
7
Effect
of
package
delamination under 3points bending test: A case
study using cyclic loading,
S.Abdullah,
M.F.Abdullah,
A.K.Ariffin,
M.N.Baharin&Z.A.Aziz, 2008, J.
Solid state science & technology,
Vol 16, No.2, 2008, pp. 72-82.
Mr Tan Ken Sheang
1
2
3
4
5
6
Drop Weight Testing Rig
Analysis and Design
An Experimental Study of
Deformation Behaviour of
Motorcycle Front Wheel
Tyre
Assembly
Under
Frontal Impact Loading
Lt Kol Khairul Hasni b Kamarudin
F.M. Shuaeib, S.V. Wong, K.S.Tan,
A.M.S. Hamouda, Radin S. Radin
Umar & M.M.H. Megat Ahmad,
Pertanika
J.
Science
&
Technology, UPM Press, 12 [2],
2004,159-175
Tan, K.S., Wong, S.V., Radin
Umar, R.S., Hamouda, A.M.S.,
and Gupta, N.K,
Int. J. Impact Engineering,
Elsevier, 32 [10], 2006, 15541572
Experimental Study on
Energy
Absorption
Characteristics
of
Motorcycle Front Wheeltyre Assembly in Frontal
Impact
K.S. Tan, S.V. Wong, R.S. Radin
Umar, A.M.S. Hamouda, M.M.H.
Megat Ahmad,
Int.
J.
Crashworthiness,
Woodhead Publishing, 11 [2],
2006, 131-142
Empirical Model for Impact
Response of Motorcycle
Front Spoked Wheel-tyre
Assembly
Tan, K S., Wong, S.V., 2006, Radin
Umar, R.S., Hamouda, A.M.S.,
Megat Ahmad, M.M.H,
Proc. of the IMechE, Part D: J.
Automobile Engineering, 220
[11], 2006, 1547-1563.
Design of MotorcyclistFriendly Guardrail Using
Finite Element Analysis
K.S. Tan, Tan Willy, S.V. Wong,
Int.
J.
Crashworthiness,
Woodhead Publishing, 13 [5],
2008, 567-577.
Impact BehaviourModelling
of Motorcycle Front WheelTyre Assembly
K.S. Tan, S.V. Wong, R.S. Radin
Umar, A.M.S. Hamouda, N.K.
Gupta,
Int. J. Automotive Technology,
The Korean
Society of Automotive Engineers,
10 [3], 2009, 329-339.
1
Iran’s Nuclear Development
Programme and its Impact on
the Security of the Middle
East,
K.H.Kamarudin, 2008, Strategi
ISSN 0128-4401 Vol 14, 2008.
Review of Armour Protection
Technology for the Future
Light Armoured Vehicles,
Shohaimi
Abdullah,
K.H.Kamarudin,
Ahmad
Mujahid Ahmad Zaidi, Zulkifli
Abdul
Kadir,
RisbyMohdSuhaimi, 2011, The
Journal of Defence and Security
ISSN 2180-284X Vol 2, No
1/2011
(Indexed
in
Copernicus
International)
Numerical Simulation Study in
Early Scabbing Occurrence on
a Concrete Target Subjected
to Local Impact Loading,
Ahmad Mujahid Ahmad Zaidi,
Qing Ming Li, Norazaman
Mohammad Nor, Shohaimi
Abdullah, Zulkifli Abdul Kadir,
K.H.Kamarudin, 2011, The
Journal of Defence and Security
ISSN 2180-284X Vol 2, No
1/2011
(Indexed
in
Copernicus
International)
Modelling and Pid-Based
Feedback Control System for
Improving
Eight-Wheeled
Armored Vehicle (8WAV)
Dynamics Performance in Roll
and Pitch Motions During
Firing,
Zulkifli, A.K., KhisbullahHudha,
Shohaimi
Abdullah,
MohdFazliMohdYusoff, Khalid
Abdul Jalil, Ahmad Mujahid
Ahmad Zaidi, K.H.Kamarudin,
MohdAzzeriMdNaiem, 2011,
The Journal of Defence and
Security ISSN 2180-284X Vol 2,
No 2/2011
(Indexed
in
Copernicus
International)
Study on panel absorber of
coconut coir with added
rubber waste, Trends in
Applied Sciences Research
(Indexed by ISI-Thomson
Reuters)-
N.Arsat,
A.M.AhmadZaidi,
M.Y.Ismail, N.Mohamad Nor
and K.H.Kamarudin (2011),
Submitted.
2
3
4
5
Lt Kol Muhammad Murrad
1
Application of Vibration
and Oil Analysis for
Reliability Information on
Helicopter Main Rotor
Gearbox
Pn Norwazan Abdul Rahim
MuhamadMurradandMohd
Salman Leong, Apr 08,Journal of
System Design & Dynamics, Japan
Society of Mechanical Engineers,
Vol 2, No 1, 2008
1.
En Mohd Rosdzimin bin Abdul Rahman
1
“CIP-LBM Scheme for the
simulation
of
natural
convection in enclosure
with localized heating”,
A R. M. Rosdzimin, C. S. N.
Azwadi, M. S. M. Syahar,
Advances
in
Mechanical
Engineering,
PenerbitUniversitiTeknologi
Malaysia, pp 1-16, 2008. ISBN
978-983-52-0591-0
2
Simulation
of
Mixed
Convective Heat Transfer
using Lattice Boltzmann
Method
A. R. M. Rosdzimin, S. M. Zuhairi
and C. S. N. Azwadi
;
International
Journal
of
Automotive and Mechanical
Engineering (IJAME) ISSN: 19859325(Print); ISSN: 2180-1606
(Online) Volume 2, pp. 130-143,
2010
3
Image Classification of
Temperature Distribution
Using
Fourier
Series
Strategy
M.A.Salim, A. R. M. Rosdzimin,
K.Osman,
A.Noordin,
M.A.MohdRosli,
Journal
of
Mechanical Engineering and
Technology (JMET) Volume 2,
No.1 (ISSN: 2180-1053), 2010
En Zulkiffli Abd Kadir
1
Modeling, Validation and
Roll Moment Rejection
Control of Pneumatically
Actuated
Active
Roll
Control for Improving
Vehicle Lateral Dynamics
Performance.
KhisbullahHudha,
ZulkiffliAbd.
Kadir, Md. Radzai Said and
HishamuddinJamaluddin. (2009).
International
Journal
of
Engineering Systems Modelling
and Simulation (IJESMS). Vol. 1,
No.2/3, pp. 122 - 136.
2
Simulation
and
Experimental Evaluations
on the Performance of
Pneumatically
Actuated
Active
Roll
Control
Suspension System for
Improving Vehicle Lateral
Dynamics Performance.
Modeling And PID-Based
Feedback Control Of Gun
Control
System
For
Improving Eight-Wheeled
Armored Vehicle (8WAV)
Dynamics Performance In
Roll And Pitch Motions
During Firing.
KhisbullahHudha,
ZulkiffliAbd.
Kadir, HishamuddinJamaluddin
and
FitrianImaduddin.
International Journal of Vehicle
Design (IJVD). (Accepted).
3
ZulkiffliAbdKadir,
KhisbullahHudha,
Shohaimi
Abdullah, MohdFazliMohdYusoff,
Khalid Abdul Jalil, Ahmad
Mujahid Ahmad Zaidi and
MohdAzzeriMdNaiem.
The
Journal Of Defence And Security.
(Accepted).
“The Effect of Bulge Height
and Length on the Lateral
Crash Behaviour of Front
Platform of Compressed
Natural Gas Vehicle”,
B.B.Sahari,
Norwazan.A.R,
A.M.S. Hamouda, Y.A. Khalid,
S.V.Wong. International Journal
of Vehicle Safety, Volume 2,
No.3, (2007).
Mohd Fazli bin Mohd Yusoff
1
Modelling and PID based
feedback control of gun
control system for improving
eight-wheeled
armored
vehicle (8WAV) dynamics
performance in roll and pitch
motions during firing,
ZulkiffliAbdKadir,
KhisbullahHudha,
Shohaimi
Abdullah,
MohdFazliMohdYusoff, Khalid
Abdul Jalil, Ahmad Mujahid
Ahmad
Zaidi,
MohdAzzeriMdNaeim, 2011,
Defense & Security Journal
Mr Leong Kin Yuen
1
A review on applications and
challenges of Nanofluids
R.Saidur,
K.Y.Leong,
H.a.Mohammad
Renewable and Sustainable
Energy
Reviews,
Vol
15(2011),pp.1646-1668.
2
Performance investigation of
an automotive car radiator
operated with nanofluid
based coolants
K.Y.Leong, R. Saidur, S. N. Kazi
and A.H. Mamun
Applied Thermal Engineering ,
Vol. 30, Issues,17-18,(2010),
pp.2685-2692.
En Balamurugum a/l Annamalai Gurunathan
1
Study
on
Dynamic
Characteristics of Coconut
Coir Fiber Reinforced with
Polyurethane,
2
Experimental
of
the
Dynamic Characteristics of
Coconut Coir Fiber with
Reinforcement in Natural
Latex Adhesive,
3
Investigation on Physical
Characteristic of Coconut
Coir
Fiber
Reinforced
Composite,
4
Study on Mechanical and
Vibration Characteristics of
Coconut
Coir
Fiber
Reinforced
With
Polyurethane,
B.Annamalai
Gurunathan,
A.M.Ahmad Zaidi, N.A.Mohd
Adnan, N.Arsat, S.Abdullah and
N.Mohamad Nor(2011) ; Modern
Applied Science, Canada (ranked
A by ERA-Indexed by SCOPUS)
(Accepted).
A.M.Ahmad Zaidi, N.A.Mohd
Adnan,N.Arsat,
B.Annamalai
Gurunathan, S.Abdullah and
N.Mohamad Nor(2011); Modern
Applied Science, Canada (ranked
A by ERA-Indexed by SCOPUS)
(Accepted)
Z.Zainuddin,
B.Annamalai
Gurunathan, A.M.Ahmad Zaidi,
N.Mohamad
Nor
and
S.Abdullah(2011);
American
Journal of Applied Sciences, USA
(Indexed by SCOPUS)(Submitted)
N.A.Mohd Adnan, N. Arsat,
F.Mohd Nor, A.M.Ahmad Zaidi
and
B.Annamalai
Gurunathan(2011) ; Applied
Physic Research, Canada (Indexed
by ProQuest) (Accepted)