BUILD SHEET REHAU SMART CONTROLS -- LARGE CABINET RCP No.: SAP Sales Order No.: Project Name: Sales Office: REHAU Designer: Designer Tel No.: Cabinet: of Large Cabinet Assembly (REHAU Article No. 298626-001); maximum of six I/O Blocks. Bay 1 Bay 3 Bay 5 REHAU Article (Assembly): REHAU Article (Assembly): REHAU Article (Assembly): Type of I/O Block: Type of I/O Block: Type of I/O Block: I/O Block Address: I/O Block Address: I/O Block Address: Bay 2 Bay 4 Bay 6 REHAU Article (Assembly): REHAU Article (Assembly): REHAU Article (Assembly): Type of I/O Block: Type of I/O Block: Type of I/O Block: I/O Block Address: I/O Block Address: I/O Block Address: Baud Rate for all I/O Blocks to be set to: 9600 19200 REHAU Article for I/O Block Assembly Article Number Description Address Range 298646-001 Wiring and Installation of Ai8-R13 I/O Block 100-109 298656-001 Wiring and Installation of Ai32 I/O Block 110-119 298666-001 Wiring and Installation of AiO8 I/O Block 120-129 Notes to Designer: Input the Selection number of what I/O Block assembly is to be installed in each bay. Write the type of I/O Block to be installed in that bay (Ai8-R13, Ai32, or AiO8). Select the proper I/O Block Address (refer to I/O wiring report, if configuration completed, for proper address assignment or use the address range described above). Number sequentially for similar I/O Blocks. Each bay must have a unique I/O Block Address. Denote the proper I/O Block Baud Rate. Choose either 9600 or 19200. The default setting of all I/O Blocks is 9600. When sheet is completed send to SLC. Note to SLC: This form should be sent with the purchase order to the vendor 0857EN_US 02.12 / 1 of 1