HEALTH & SAFETY
CHEMICAL RISK ASSESSMENT FORM
Ra No.:
Date:
Version No.:
Review Date:
Authorised by:
STEP 1 – ENTER INFORMATION ABOUT THE ACTIVITY/TASK, ITS LOCATION AND THE PEOPLE COMPLETING THE RISK ASSESSMENT
Location name:
Building No.:
Room No.:
Chemical (Manufacturer’s name and product name):
Date:
Suface Spray Cleaner
Yes
If “yes” list the dangerous goods class:
No
HSR/Employee representative:
Is the chemical a hazardous substance?
Yes
Is the chemical a dangerous good?
Assessed by:
If “yes” list the hazard statement:
No
H222, H336, AUH044 (example for Mr Sheen
Aerosole)
Is the chemical a scheduled poison?
2.1
Yes
If “yes” list the poison schedule:
No
Description of work/activities/use:
General purpose surface spray for domestic use. For cleaning and polishing surfaces.
Are there any licencing/permit requirements?
Yes
If “yes” provide details:
Health surveillance requirements (list “nil” if not required):
No
Nil
A current MSDS/SDS is available
Yes
Exposure route of chemical:
Inhalation
Skin (absorption)
Eye
Ingestion
Injection
Other – Specify:
Workplace conditions (Describe layout and physical conditions - including access and egress):
General office area – open plan.
What are the storage requirements?
What are the waste/disposal requirements?
Store in a clean dry area (cupboard) away from heat and direct sunlight
Discard the completely empty tin in the recylcling bin
List systems of work for the activity/task:
Directions for use on spray can
● Training
● Inspections
Local area staff induction
● SOPs
● Existing controls
Bimonthly workplace inspections – include chemical storage and use
● Emergency situations
Is there past experience with the chemical that may assist in the assessment?
OHS Act 2004. OHS Regulations 2007
● Existing controls
● SOPs
● Standards
University of Melbourne chemical management guidance material.
● Industry standards
● Incidents & near-hits
● Legislation & Codes
● Training
● Incident Investigation
● Guidance material
safety.unimelb.edu.au
Chemical Risk Management Procedure
HEALTH & SAFETY: CHEMICAL RISK ASSESSMENT FORM – SURFACE SPRAY CLEANER 1
Template date: June 2015 Version: 1.0 Authorised by: Associate Director, Health & Safety Next Review: June 2018
© The University of Melbourne – Uncontrolled when printed.
First aid and emergency requirements
Basic first aid kit
● Additional first aid kit contents
● Special first aid requirements (eg oxygen)
University of Melbourne local area emergency procedures (see last page)
● Emergency eyewash
● Emergency shower
Local area first aid procedures (see last page)
● Spill kit
safety.unimelb.edu.au
● Neutralising agent
● Restrict access
HEALTH & SAFETY: CHEMICAL RISK ASSESSMENT FORM – SURFACE SPRAY CLEANER 2
Template date: June 2015 Version: 1.0 Authorised by: Associate Director, Health & Safety Next Review: June 2018
© The University of Melbourne – Uncontrolled when printed.
STEP 2: SELECT A RISK RATING METHOD
TWO VARIABLE RISK MATRIX
THREE VARIABLE RISK CALCULATOR
(1) Definitions of likelihood labels
(1) Definitions of exposure variables
Likelihood (Probability)
Level
Descriptor
Description
Exposure
E
Expected to occur
Continuously or many times daily
10
6
A
Almost certain
The event will occur on an annual basis
Once a year or more
Frequently: Approximately once daily
B
Likely
The event has occurred several times or
more in your career
Once every three years
Occasionally: Once a week to once a month
3
Infrequently: Once a month to once a year
2
C
Possible
The event might occur once in your career
Once every 10 years
Rarely: Has been known to occur
1
D
Unlikely
The event does occur somewhere from time Once every 30 years
to time
Very rarely: Not known to have occurred
0.5
E
Rare
Heard of something like the event occurring
elsewhere
(2) Definitions of likelihood variables
Once every 100 years
(2) Definitions of consequence labels
Severity level
Consequences
V Catastrophe
One or more fatalities and/or severe irreversible disability to one or more
people
IV Major
Extensive injury or impairment to one or more persons
III Moderate
Short term disability to one or more persons
II Insignificant
Medical treatment and/or lost injury time <2 weeks
I Negligible
First aid treatment or no treatment required
Likelihood
L
Almost certain: The most likely outcome if the event occurs
10
Likely: Not unusual, perhaps 50-50 chance
6
Unusual but possible: (e.g. 1 in 10)
3
Remotely possible: A possible coincidence (e.g. 1 in 100)
1
Conceivable: Has never happened in years of exposure, but possible (eg 1 in 1,000) 0.5
Practically impossible: Not to knowledge ever happened anywhere (e.g. 1 in
10,000)
0. 1
(3) Definitions of consequence variables
(3) Risk rating matrix
Likelihood
Consequence label
label
I
II
III
IV
V
A
Medium
High
High
Very high
Very high
B
Medium
Medium
High
High
Very high
C
Low
Medium
High
High
High
D
Low
Low
Medium
Medium
High
E
Low
Low
Medium
Medium
High
Consequences
C
Catastrophe: Multiple fatalities
100
Disaster: Fatality
50
Very serious: Permanent disability/ill health
25
Serious: Non-permanent injury or ill health
15
Important: Medical attention needed
5
Noticeable: Minor cuts and bruises or sickness
1
(4) Risk score calculator
Risk Score = E x L x C
safety.unimelb.edu.au
Risk score
Risk rating
> 600
Very high
300 - 599
High
90 - 299
Medium
< 90
Low
HEALTH & SAFETY: CHEMICAL RISK ASSESSMENT FORM – SURFACE SPRAY CLEANER 3
Template date: June 2015 Version: 1.0 Authorised by: Associate Director, Health & Safety Next Review: June 2018
© The University of Melbourne – Uncontrolled when printed.
STEP 3 – REVIEW CHEMICAL PROCESS
For each stage of the chemical risk assessment:
Hierarchy of Control (Control Type)

Review the prompts/examples for each route of exposure for each category;
El – Elimination

Determine and record a raw risk score by referencing the two variable risk matrix or the three variable risk calculator;
S – Substitution

In the comments box, describe the route of exposure and any other information (if applicable);
En – Engineering

Specify the risk control type for each current or proposed risk control;
Sh – Shielding

Provide a control description for each current or proposed risk control;
A – Administrative T – Training

Where proposed risk control(s) have been identified complete a Health & Safety Action Plan;
M – Monitoring

Determine the residual risk score referencing the same two variable risk matrix or three variable risk calculator used to determine the raw
risk score.
P – PPE
Category
Raw
Risk Score
Storage
1 x 1 x 25
● Inhalation
● Skin (absorption
= 25
● Eye
● Ingestion
Low
● Injection
● Other
Handling
G – Guarding
In – Inspection
H – Health Monitoring
For information devising appropriate controls, refer to: Guide to
Chemical Risk Hierarchy of Control.
Comments (when/where the exposure is present)
Control Type
Control Description
(Current and Proposed)
Residual
Risk Score
Can is pressurised and has a Class 2.1 propellant – fire
or explosion
A
Store away from food
Low
Store away from heat and direct sunlight
Nil
● Inhalation
● Skin (absorption
● Eye
● Ingestion
● Injection
● Other
Decanting/Mixing
Nil
● Inhalation
● Skin (absorption
● Eye
● Ingestion
● Injection
● Other
Use as per instructions
Do not spray near naked flame, pilot lights or other
sources of ignition
Surfaces can become slippery so clean up any overspray
from the floor immediately
Do not spray near eyes or face
Cover or remove food/drinks before using
Low
A
Dispose of damaged can
Low
P
Clean up leak with warm soapy water and cloth (paper
towels)
Applying/Using
1 x 1 x 50
Lung and eye irritant – minor burning to eyes
A
● Inhalation
● Skin (absorption
= 50
Skin irritant
T
● Eye
● Ingestion
Low
● Injection
● Other
Spill/Leak
1 x 1 x 50
Skin irritant
● Inhalation
● Skin (absorption
= 50
Lung and eye irritant
● Eye
● Ingestion
Low
● Injection
● Other
safety.unimelb.edu.au
Is – Isolation
Wear disposable gloves
HEALTH & SAFETY: CHEMICAL RISK ASSESSMENT FORM – SURFACE SPRAY CLEANER 4
Template date: June 2015 Version: 1.0 Authorised by: Associate Director, Health & Safety Next Review: June 2018
© The University of Melbourne – Uncontrolled when printed.
Category
Raw
Risk Score
Disposal
1 x 1 x 50
● Inhalation
● Skin (absorption
= 50
● Eye
● Ingestion
Low
● Injection
● Other
Comments (when/where the exposure is present)
Control Type
Control Description
(Current and Proposed)
Residual
Risk Score
May still be pressurized when empty – risk of fre
explosion
A
Dispose of per instructions on the can
Low
Keep away from ignition sources
STEP 4 – IMPLEMENTATION AND CONSULTATION PROCESS
Determine the person responsible for reviewing and implementing the risk assessment including the identified controls. Ensure a Health & Safety Action Plan has been completed, reviewed and signed off where
proposed controls have been identified.
Obtain the authorisation of the management representative.
Ensure the HSR (if applicable) has been consulted. Ensure the employees undertaking the activity have been consulted.
Record below the names of the persons consulted.
Management representative
HSR/Employee representative
Employee(s)
Employee(s)
Employee(s)
Employee(s)
Person Responsible for implementation or escalation
Extra writing room - use this page to enter extended comments or descriptions
Review:
Review risk assessment every 3 years.
Review employee chemical procedures during workplace inspections.
Review risk assessment where there is an incident with the chemical or new information becomes available.
Review risk assessment when the MSDS/SDS is updated/reissued.
Emergency and First Aid procedures
Ensure that general first aid procedures and resources are in place and available.
First aid risk assessment and procedures that take into account the risks associated with the chemical and possible adverse outcomes.
University of Melbourne and local area emergency procedures.
PPE
Disposaable gloves when cleaning up leaks.
To eliminate injuries always use the chemical in accordance with the manufacturer’s instructions and for its intended purpose only.
For use in conjunction with the OHS risk management procedure and the Chemical risk management procedure.
For further information, refer to http://safety.unimelb.edu.au/tools/risk/ or contact your Local Health & Safety contact.
safety.unimelb.edu.au
HEALTH & SAFETY: CHEMICAL RISK ASSESSMENT FORM – SURFACE SPRAY CLEANER 5
Template date: June 2015 Version: 1.0 Authorised by: Associate Director, Health & Safety Next Review: June 2018
© The University of Melbourne – Uncontrolled when printed.