List of products awarded the MTP Gold Medal
at EXPOPOWER 2015
OPTIMA 145 – Metal enclosed gas-insulated switchgear (GIS)
ELEKTROBUDOWA S.A., Katowice
It is designed for use in electricity distribution networks
with the frequency of 50 Hz and nominal voltage up to
145 kV. It is an interior, interval switchboard, in an
aluminium casing made as a cast with single or double
busbar system and a switch with self-compressing
chamber. Thanks to its optimum size, it may be
installed in new and modernized power plants.
EKO composite pole
Energy Composites Sp. z o.o., Wodzisław Śląski
The pole is a new quality in the energy sector. Made
from composite. Designed for the construction of
overhead LV and MV lines. It is a light weight product,
easy and cheap to transport. The assembly can be
performed by two persons. There is no need to use
heavy equipment. It has a 40 year design life. It is safe,
as it is an insulator. The perch production is organic –
the pole is 100% recyclable. It does not corrode; it is
resistant to all road dirt, salt, animal contamination. It
does not interfere with radio waves, microwaves,
radars. It does not absorb fluids and does not deform
permanently. The perch means savings.
Telemechanics control unit for SMART GRID technology applications
Badawczo –Rozwojowa Spółdzielnia Pracy Mikroprocesorowych Systemów Automatyki
(Microprocessor Automation Systems Research and Development Cooperative)
MIKRONIKA, Poznań
Submitted by: Przedsiębiorstwo Techniczno-Handlowe EUROTRONIC Sp. z o.o., Poznań
The USP-120-2 object control unit is designed to
perform telemechanics functions resulting from the
needs of the Smart Grid technology, including the
collection of statuses and the implementation of
controls in facilities and devices working within power
devices. In particular, the control unit may operate as
an element of distributed tele-signalling and teleoperation systems, installed in drive cabinets of MV
overhead cut-off switches
SELF- HEALING GRID SHG restoration system
Schneider Electric Telecontrol, France
Submitted by: Schneider Electric Polska Sp. z o.o.
The solution is based on a standard product offered by
Schneider Electric - the Easergy T200I station control
unit. Control units available in the market are based on
the communication with the SCADA/DMS type master
system, where decisions on switching operations are
taken by a controller, which, in the case of power
restoration, takes too much time. Schneider Electriic
developed a solution that shortens the time of restoring
energy supply from an average of two hours to approx.
30 seconds thanks to the application of peer-to-peer
communication between control units and the
automation of the entire process. The whole system is
decentralized, designed to work without SCADA/DMS or
as its supplement. The controller is informed of a short
circuit, but SHG does not wait for the controller's
response. Instead, Easergy T200I drivers automatically
communicate with each other in order to find a dense
area, isolate it and restore power in areas not covered
by the network disturbance.
Mzb2 type prefabricated transformer station
ZPUE S.A. Włoszczowa
submitted by: ZPUE S.A. Włoszczowa
ZPUE S.A. / Grupa KORONEA, Włoszczowa
Mzb2- a prefabricated transformer station in the C30/37
casing made of reinforced concrete with external
support. Standard equipment - TPM MV switchgear,
RN-W LV, installed on the opposite sides of the station;
transformer chamber (max.630kVA) is positioned in the
middle, installation - after the removal of the roof.
Gravity ventilation. The stations are transported fully
equipped to the place of installation. The stations
comply with the ENEA Operator Sp. z o.o. standards as
of January 1, 2015
List of products awarded the MTP Gold Medal
at GREENPOWER 2015
“POSTERUS 2020” universal integrated installation for the production of secondgeneration biofuels from glycerine waste
BIOTEN Sp. z o.o., Poznań
„POSTERUS 2020” - a breakthrough in the production
of biofuels. An integrated, universal pilot system for the
production of second generation biofuels from waste
glycerine phase formed during the production of
biodiesel. The installation solves the global problem of
managing the glycerine phase waste by the
manufacturers of bioesters, and it is a closing element
of the cycle of the production of biofuels from rapeseed
oil. Also, the resulting fertilizer is usable in agriculture,
and it confirms the universal and waste-free nature of
the technology.
Nogen heaters
Nogen Sp. z o.o., Kobylnica











product patented in Poland and Europe
manufactured in Poland
advanced control automation
maximum utilization of the energy taken and
processing into thermal energy
much more efficient than traditional heaters
no-cost installation
they produce no exhaust or waste
they eliminate low emissions in cities
they do not reduce natural air humidity
they do not produce the dust burning effect and
they are odourless.
made from the highest quality materials
The machine aggregated with an agricultural tractor for collecting and rolling up
of wood material remaining after the cutting of branches, tree suckers and shrubs
as biomass for energy purposes
Przemysłowy Instytut Maszyn Rolniczych (Industrial Institute of Agricultural Engineering),
Poznań and PROMAR Sp. z o.o., Poznań
submitted by: Przemysłowy Instytut Maszyn Rolniczych (Industrial Institute of Agricultural
Engineering), Poznań
In the machine invented by the Industrial Institute of
Agricultural Engineering, a unique design gatherer was
used in the form of a cylinder, on which there are jaw
clutches in the shape of cams mounted radially,
symmetrically, adapted to the type of wood material
collected in orchards and vineyards. In the machine a
special design tandem type suspension system was
applied (where at the ends of the common beam on the
left and right swingarms four wheels not extending
beyond the machine were mounted), which allows to
reduce the pressure on the ground and enables the
machine to be operated in interrows of small width.
Spirvent invertrer
Spirvent Sp.z o.o., Oborniki
The value that motivates us is the idea of organic work
combined with activities aimed at improving the world
around us.
Our first proposal is the Spirvent inverter - Wolta: easy
to use, durable, efficient, intelligent, featuring a number
of innovative solutions and constructed on the basis of
Polish, innovative technical thought.
We offer a modern device, prepared with
PROSUMENT-s in mind.
Our device enables secure, constant monitoring of
electricity production both for individual purposes and
for sale to an operator.