Syndraulic®
Syndraulic® Premiere hydraulic oil, with Synerlec® additive technology. A clean, long life,
energy efficient, minimum leak, hydraulic oil possessing exceptional film strength and wear
protection properties.
Advantages: It greatly increases both the life of the oil and the seals, filters and pumps of
hydraulic systems and can lower operating temperatures and restore normal operation to
erratically operating hydraulic systems.
Recommended use for: All Hydraulic Equipment including pumps, compressors and Top Drives
Dezel Hi-Base®
Dezel Hi-Base® is a synthetic blend engine oil recommended for diesel engines operating on
high sulfur diesel fuels commonly found in South America, Africa, Asia and Mexico. Engines
using high sulfur fuels require engine oils with higher alkalinity (base numbers) to neutralize the
corrosive acids formed when the sulfur in the fuel is burned. Generally, the base number required
will be twenty times the sulfur content in the fuel.
Dezel Hi-Base® is offered in the following standard base numbers: 10, 15, 17, 20 and 30. Note:
Other base numbers available.
Advantages: Dezel Hi-Base® contains Royal Purple's propritary Synerlec® additive technology,
which prevents metal-to-metal contact, thereby greatly reducing all engine wear -- including
ring, cylinder and bearing wear. This tough, synthetic film adheres to engine surfaces and
remains there after shutdown providing instant protection upon startup.
Dezel Hi-Base® prevents oil breakdown caused by high temperatures, thereby extending both oil
and filter life. Dezel Hi-Base® is fully compatible with other mineral and synthetic oils and has
excellent seal compatability.
Reccomended use for: All Diesel Engines
Synergy®
Synergy® is Royal Purple's best-selling EP gear oil and is designed to smoothly lubricate gears
under virtually all conditions.
Advantages: ultra-tough, long life, gear oil with slippery, synthetic molecules, which greatly
increase its lubricity and oiliness properties. Gears run smoother, quieter, cooler, longer, and
more efficiently without overhauls.
Reccomended use for: Mud Pumps
Marine Hydraulic Oil™
Marine Hydraulic Oil™ Synthetic blend hydraulic oil, with Synerlec® additive technology. An
inherently biodegradeable, ashless, environmentally responsible, high performance, hydraulic oil
formulated for those users that need a high performance oil to protect their equipment yet are
concerned about the environment.
Advantages: meets the U.S. Fish and Wildlife Department's and the EPA's toxicity test
requirements for marine life. It greatly increases equipment reliability and provides excellent
protection in highly corrosive environments.
Recommended use for: All Hydraulic Equipment including pumps, compressors for offshore
Drilling Rig operations and other marine related services.
RP Motor Oil
Royal Purple® Motor Oil High performance engine oil, with Synerlec® additive technology.
Royal Purple Motor Oil is compatible with other mineral and synthetic motor oils. It’s available
in 0W40, 5W20, 5W30, 5W40, 10W30, 10W40, 15W40, 20W50, SAE 30, SAE 40 and SAE 50
weights.
Royal Purple’s motor oils are API certified.
Advantages: It increases horsepower and torque, saves fuels and reduces heat, wear and
emissions. It has unsurpassed oxidation stability that allows for extended oil drains and fewer oil
changes, which saves you time and money and reduces the impact on the environment.
Recommended use for: all four-cycle gasoline engines and both two-cycle and four cycle diesel
applications including automotive, commercial fleet and stationary industrial diesel engines.
Synfilm® Synthetic
Synfilm® Synthetic air compressor and industrial oil, with Synerlec® additive technology.
Royal Purple's best-selling industrial lubricant is a clean, dry, long life, high film strength,
energy efficient, synthetic lubricant that significantly increases bearing life and equipment
reliability
Advantages: rapidly and completely separates from water and provides excellent protection
against rust and corrosion. Synfilm® users experience lower operating temperatures, reduced
bearing vibrations, extended oil drain intervals and longer equipment life.
Recommended use for: air compressors, pumps, bearings, gears, air tools, etc.
Synfilm® GT
Synfilm® GT Multi-purpose industrial oil, with Synerlec® additive technology. Synfilm® GT is
a clean, dry, long life, high film strength, energy efficient, synthetic lubricant that significantly
increases bearing life and equipment reliability.
Advantages: rapidly and completely separates from water and provides excellent protection
against rust and corrosion. Synfilm® users experience lower operating temperatures, reduced
bearing vibrations, extended oil drain intervals and longer equipment life.
Recommended use for: gas and steam turbines, blowers and vacuum pumps, bearings, gears, air
tools, etc. Synfilm® GT should be considered instead of Synfilm® when: oil reservoir
temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity
grade is not available in Synfilm®.
Ultra-Performance® Grease
Ultra-Performance® Grease is a high performance, multi-service, aluminum complex, synthetic
grease. Its outstanding EP capabilities and excellent water resistance to both emulsion and
washout are achieved through its superior blend of synthetic base oils plus Synslide® additive
technology -- Royal Purple's unique, proprietary, noncorrosive, EP additive technology.
Advantages: significantly increases bearing life and equipment reliability and makes bearings
run smoother, cooler, quieter, longer and more efficiently. Ultra-Performance® Grease can be
pumped at low temperatures, is stable at high temperatures and has excellent oxidation resistance
to extend service life and to provide a margin of safety between relubrication intervals.
Recommended use for: a wide range of grease requirements and is recommended for motor &
pump bearings and general purpose use.