SECTION 10305
MANUFACTURED FIREPLACES
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2004 - 2015 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1
1.2
1.3
1.4
SECTION INCLUDES
A.
Manufactured Wood Fireplaces.
B.
Manufactured Gas Fireplaces.
RELATED SECTIONS
A.
Section 04810 - Unit Masonry Assemblies.
B.
Section 06100 - Rough Carpentry.
C.
Section 09250 - Gypsum Board.
D.
Section 15145 - Plumbing Piping: Gas piping and shut-off valve.
E.
Section 16150 - Equipment Wiring
REFERENCES
A.
ANSI Z21.44 - Gas-Fired Gravity and Fan Type Direct Vent Wall Furnaces.
B.
ANSI Z21.88 - Vented Gas Fireplace Heaters.
C.
Z21.50b - Vented Gas Fireplaces.
D.
ANSI Z223.1 - National Fuel Gas Code.
E.
CSA 2.22b - Vented Gas Fireplaces.
F.
CSA 2.33 - Vented Gas Fireplace Heaters.
G.
CAN/ULC S610 - Factory-Built Fireplaces.
H.
UL 127 - Standard for Factory-Built Fireplaces.
I.
UL 907 - Standard for Fireplace Accessories
J.
UL 1482 - Standard for Safety for Solid-Fuel Type Room Heaters.
SUBMITTALS
10305-1
1.5
A.
Submit under provisions of Section 01300.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
DELIVERY, STORAGE, AND HANDLING
A.
Store products in manufacturer's unopened packaging until ready for installation.
B.
Store products in covered area, well protected from weather.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: Fireplace X - a division of Travis Industries, which is located at:
12521 Harbour Reach Drive; Mukilteo, WA 98275; Toll Free Tel: (800) 654-1177; Tel: (425)
609-2500; Fax: (425) 609-2781; Email:request info (h.taylor@travis-inc.com);
Web:www.travisindustries.com
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section
01600.
WOOD BURNING MANUFACTURED FIREPLACES
A.
General: Travis Industries Fireplace Xtrordinair wood burning manufactured fireplaces.
1.
Comply with applicable building codes.
2.
Comply with UL 127.
3.
Comply with portions of UL 1482 and UL 907.
4.
Provide Posi-pressure whole heating system with external air kit and blower.
5.
Provide duct from fireplace to external air intake.
6.
Provide with cooling vents including two 12 inch (305 mm) lengths of vent and storm
collars and vent hoods.
7.
Include log grate.
B.
Model 36 Elite: Mid-sized wood burning fireplace for up to 24 inch (610 mm) logs and
featuring the Posi-pressure whole heating system No. 98500104.
1.
Framing Dimensions: 43 inches (1092 mm) wide by 45-1/2 inches (1157 mm) high by
26 inches (660 mm) deep.
2.
Chimney: 8 inches (203 mm) inner diameter. Use Temco 82, Superior TF8, FMI 8DM
or Marco 8D chimney systems.
3.
Door Styles:
a.
Classic Arch, Black painted single door w/ single glass and iron No. 98500458.
b.
Classic Arch, Artisan single door w/ glass and iron No. 98500459.
c.
Classic Arch, Black painted double doors w/ clear glass No. 98500456.
4.
Arched Faces:
a.
Elite face, Black Painted No. 98500556.
b.
Elite face, Artisan No. 98500559.
c.
Elite face, Brushed Nickel No. 98500554.
5.
Accessories:
a.
Black painted pressure fit door screen No. 99300227.
b.
Extension Cord, 8 foot (2.44 m) with junction box No. 98500718.
C.
Model 44 Elite: Large wood burning fireplace for up to 32 inch (813 mm) logs and featuring
10305-2
the Posi-pressure whole heating system No. 98500113.
1.
Framing Dimensions: 50 inches (1270 mm) wide by 50-1/2 inches (1283 mm) high by
26 inches (660 mm) deep.
2.
Chimney: 8 inches (203 mm) inner diameter. Use Temco 82, Superior TF8, FMI 8DM
or Marco 8D chimney systems.
3.
Door Styles:
a.
Classic Arch, Black painted double doors w/ clear glass No. 98500471.
b.
Classic Arch, Artisan double doors w/ clear glass No. 98500472.
4.
Arched Faces:
a.
Elite Face, Black No. 98500575.
b.
Elite Face, Artisan No. 98500590.
c.
Elite Face, Brushed Nickel No. 98500596.
5.
Accessories
a.
Black painted pressure fit door screen No. 99300228.
b.
Extension Cord, 8 foot (2.44 m) with junction box No. 98500718.
2.3
GAS BURNING MANUFACTURED FIREPLACES
A.
General: Travis Industries Fireplace Xtrordinair gas burning manufactured fireplaces.
1.
Comply with applicable building codes.
2.
Comply with ANSI Z21.88/CSA 2.33 or Z21.50b/CSA 2.22b.
3.
WHI listed.
B.
Model Bed and Breakfast GRS 2: Top or Rear vent, portrait style gas fireplace. Ideal for
small tight locations such as bedrooms and baths. No. 98500235.
1.
Framing Dimensions: 20-1/4 inches (514 mm) wide by 34-1/4 inches (869 mm) high
by 12-3/4 inches (324 mm) deep when installed as a Rear Vent and 13-1/2 inches
(335 mm) deep when installed as a Top Vent.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent only.
3.
Provided Ember-Fyre burner.
4.
Heater Input: Up to 16,500 BTU/hr with natural gas or propane.
5.
Faces, Bed & Breakfast:
a.
Classic Arch, Black Painted No. 98700167.
b.
French Country, Black Painted No, 98700168.
c.
Artisan, Charcoal No. 95700169.
d.
Artisan Patina Bronze No. 9700170.
6.
Grills:
a.
Arts and Crafts, antique nickel No. 98500366
7.
Interiors:
a.
Almond Cast Shell No. 98500670.
b.
Travertine Stone No. 98500668.
c.
Brick Beehive No. 98500669.
d.
Black enamel No. 98500660.
8.
Accessories:
a.
Vent, 21RV No. 98900166.
b.
6 inch (152 mm) Flue Adapter, 21DV top vent No. 98900165.
c.
21RV 8 inch (203 mm) Minimum Rear Vent Kit No. 98900168.
C.
Model 3615 HO GSR2: Top Vent, high glass, linear gas fireplace No. 98500322.
1.
Size: 40-3/4 inches (1035 mm) wide by 37-3/8 inches (924 mm) high by 17 inches
(432 mm) deep..
2.
Framing Dimensions: 54 inches (1372 mm) high by 40-3/4 inches (781 mm) wide by
16-1/2 inches (420 mm) deep.
3.
Vent: 6 inch (152 mm) Direct Vent
4.
Under-lite ribbon burner
5.
Heat Input: 33,000 BTUs/Hr
10305-3
6.
7.
8.
9.
Interior Liner Style:
a.
Ledgestone No. 96100944
b.
Black Painted No. 96100943.
c.
Black Enamel No. 96100942.
d.
Stainless Steel No. 96100941.
Crushed Glass Floor:
a.
Crushed Glass Media: Bronze No. 94500581.
b.
Crushed Glass Media: Cobalt Blue No. 94500582.
c.
Crushed Glass Media: Platinum No. 94500580.
Additional Interior Option:
a.
Driftwood Logset No. 94500963.
b.
Driftwood/Stone Kit No. 94500960
Accessories:
a.
Power Heat Duct Kit No. 98500769
D.
Model 4415 HO GSR2: Top Vent 44 inches wide by 15 inches high glass, linear gas
fireplace No. 98500328.
1.
Size: 48-3/4 inches (1239 mm) wide by 37-3/8 inches (924mm) high by 16-1/2 inches
(420mm) deep..
2.
Minimum Framing Dimensions: 60 inches (1524 mm) high by 48-3/4 inches (1239
mm) wide by 16-1/2 inches (420 mm) deep.
3.
Vent: 6 inch (152 mm) Direct Vent
4.
Under-lite ribbon burner
5.
Heat Input: 42,000 BTUs/Hr
6.
Interior Liner Style:
a.
Ledgestone Ceramic Brick No. 96100974
b.
Black Painted No. 96100973.
c.
Black Enamel No. 96100972.
d.
Stainless Steel No. 96100971.
7.
Crushed Glass Floor:
a.
Crushed Glass Media: Bronze No. 94500581.
b.
Crushed Glass Media: Cobalt Blue No. 94500582.
c.
Crushed Glass Media: Platinum No. 94500580.
8.
Additional Interior Option:
a.
Driftwood Logset No. 94500963.
b.
Driftwood/Stone Kit No. 94500960
9.
Accessories:
a.
Power Heat Duct Kit No. 98500769
E.
Model 4415 HO See-Thru: Top Vent 44 inches wide by 15 inches high glass, linear gas
fireplace No. 98500333.
1.
Size: 51 inches (1295 mm) wide by 38-1/4 inches (972mm) high by 16-1/2 inches
(420mm) deep..
2.
Minimum Framing Dimensions: 64 inches (1626 mm) high by 52-1/4 inches (1328
mm) wide by 16-1/2 inches (420 mm) deep.
3.
Vent: 6 inch (152 mm) Direct Vent
4.
Under-lite ribbon burner
5.
Heat Input: 42,000 BTUs/Hr
6.
Interior Liner Style:
a.
Ledgestone Ceramic Brick No. 96100976.
b.
Black Painted No. 96100977.
c.
Black Enamel No. 96100978.
d.
Silver Painted No. 96100979.
7.
Crushed Glass Floor:
a.
Crushed Glass Media: Bronze No. 94500581.
b.
Crushed Glass Media: Cobalt Blue No. 94500582.
10305-4
8.
c.
Crushed Glass Media: Platinum No. 94500580.
Additional Interior Option:
a.
Driftwood Logset No. 94500966.
b.
Driftwood/Stone Kit No. 94500960
F.
Model 6015 HO GSR2: Top Vent 60 inches wide by 15 inches high glass, linear gas
fireplace No. 98500334.
1.
Size: 64-3/4 inches (1645 mm) wide by 37-3/8 inches (924mm) high by 16-1/2 inches
(420mm) deep.
2.
Minimum Framing Dimensions: 72 inches (1829 mm) high by 64-3/4 inches (1645
mm) wide by 17 inches (432 mm) deep.
3.
Vent: 6 inch (152 mm) Direct Vent
4.
Underlite ribbon burner
5.
Heat Input: 56,000 BTUs/Hr
6.
Interior Liner Style:
a.
Ledgestone Ceramic Brick No. 96100984
b.
Black Painted No. 96100983.
c.
Black Enamel No. 96100982.
d.
Stainless Steel No. 96100981.
7.
Crushed Glass Floor:
a.
Crushed Glass Media: Bronze No. 94500581.
b.
Crushed Glass Media: Cobalt Blue No. 94500582.
c.
Crushed Glass Media: Platinum No. 94500580.
8.
Additional Interior Option:
a.
Driftwood/Stone Kit No. 94500960
9.
Accessories:
a.
Power Heat Duct Kit No. 98500769
G.
Model 564 Space Saver GSR2: Direct Vent. No. 98500252.
1.
Framing Dimensions: 36-1/2 inches (927 mm) wide by 38 inches (965 mm) high by
17-1/4 inches (438 mm) deep.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Provide Two Stage Pan Burner.
4.
Heater Input: Up to 20,500 BTU/hr with natural gas or propane.
5.
Faces:
a.
Basic Grill Black No. 96200808.
b.
Classic Arch, Black Painted No. 95400402.
c.
French Country, Black Painted No. 95400408.
d.
Artisan, Charcoal Painted No. 95400418.
e.
Artisan, Hand-Rubbed Bronze Patina No. 95400417
f.
Metropolitan, Black Painted No. 95400411.
g.
Shadowbox, Brushed Nickel No. 95400428
h.
Shadowbox, Satin Black No. 95400430.
i.
Architectural Rectangular Double Door No. 95400467.
j.
Iron Works, Hand-Rubbed Bronze Patina No. 95400436.
k.
Timberline, Hand-Rubbed Bronze Patina No. 95400435.
l.
Black Louvers No. 96200801.
6.
Interior Style:
a.
Fireback - Reversible, Common Brick on one side Herringbone on the other No.
96100179.
b.
Fireback - Reversible, Diamond Mosaic on one side and Old World Stucco on
the other No. 96100187.
c.
564 SS - Stainless Steel Firebox Liner No. 96100180.
d.
Fireback - Black Enamel No. 96100203.
e.
Fireback - Hand-Made Brick No. 96100270.
10305-5
7.
f.
Fireback - Ledgestone No. 96100191.
Accessories:
a.
Arched Face Upgrade Kit No. 98500683.
b.
Arched Set-Up Face Template No. 98500674.
c.
Arched Double Door Facing Guide No. 96900840.
d.
8 inch Minimum Rear Vent Kit No. 98900168.
e.
Flue Adapter, DV No. 98900165.
f.
GS Remote Control No. 99300690 (NG).
g.
GS Remote Control No. 99300688 (LP).
h.
Andiron Lodge Ring No. 96700641.
i.
Andiron Traditional Ring No. 96700642.
j.
Iron Works Handle, Lodge Ring No. 96500871
k.
Studio Trim For Basic Grills - Brushed Nickel 3-sided No. 95400421.
l.
Studio Trim For Basic Grills - Brushed Nickel 4-sided No. 95400431.
m.
Studio Trim For Basic Grills - Satin Black 3-sided No. 95400427.
n.
Studio Trim For Basic Grills - Satin Black 4-sided No. 95400426.
H.
Model 564 Space Saver Clean Face GSR2: Direct Vent. No. 98500251.
1.
Framing Dimensions: 38-1/4 inches (972 mm) wide by 36-3/4 inches (934 mm) high
by 19-1/8 inches (486 mm) deep.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Provide Two Stage Pan Burner.
4.
Heater Input: Up to 20,500 BTU/hr with natural gas or propane.
5.
Tile Trim (optional):
a.
1/2 inch to 7/8 inch No. 95900380.
b.
1 inch to 1-1/2 inch No. 95900382.
6.
Interior Style:
a.
Fireback - Reversible, Common Brick on one side Herringbone on the other No.
96100179.
b.
Fireback - Reversible, Diamond Mosaic on one side and Old World Stucco on
the other No. 96100187.
c.
564 SS - Stainless Steel Firebox Liner No. 96100180.
d.
Fireback - Black Enamel No. 96100203.
e.
Fireback - Hand-Made Brick No. 96100270.
f.
Fireback - Ledgestone No. 96100191.
7.
Accessories:
a.
8 inch Minimum Rear Vent Kit No. 98900168.
b.
Flue Adapter, DV No. 98900165.
c.
GS Remote Control No. 99300690 (NG).
d.
GS Remote Control No. 99300688 (LP).
e.
Iron Works Handle, Lodge Ring No. 96500871.
f.
Andiron, Lodge Ring No. 96700641.
g.
Andiron, Traditional Ring No. 96700642.
I.
Model 564 High Output GSR2: Direct Vent. No. 98500270.
1.
Framing Dimensions: Inches 36-1/2 inches (928 mm) wide by 36-3/4 inches (936 mm)
high by 17-3/4 inches (450 mm) deep
2.
Vent: 8 Inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Choice of Ember-Fyre, Dancing-Fyre, or Diamond-Fyre II Burners
4.
Heater Input: Up to 35,000 BTU/hr with natural gas or propane.
5.
Burners:
a.
Ember- Fyre No. 96900116
b.
Diamond-Fyre No. 96900115
1)
Driftwood Fire Art No. 94500571
10305-6
6.
7.
8.
J.
2)
Fyre-Stone Rock Set No. 94700760
c.
Dancing-Fyre No. 96900114
Faces:
a.
Basic Grill Black No. 96200808
b.
Classic Arch, Black Painted No. 95400402
c.
French Country e, Black Painted No. 95400408
d.
Artisan, Charcoal Painted No. 95400418
e.
Artisan, Bronze Patina No. 95400417
f.
Metropolitan, Black Painted No. 95400411
g.
Shadowbox, Brushed Nickel No. 95400428
h.
Shadowbox, Satin Black No. 95400430
i.
Architectural Rectangular Double Door No. 95400466
j.
Ironworks, Hand-Rubbed Bronze Patina No. 95400436
k.
Timberline, Hand-Rubbed Bronze Patina No. 95400435
l.
Black Louvers No. 96200801
Interior Style
a.
Fireback-Reversible, Common Brick on one side Herrringbone on the other No.
96100179
b.
Fireback-Reversible, Diamond Mosaic on one side and Old World Stucco on
the other No. 96100187
c.
Fireback- Black Enamel No. 96100203
d.
Fireback-Hand Made Brick No. 96100270
e.
Fireback- Ledgestone No. 96100191
Accessories
a.
Arched Face Upgrade Kit No. 98500683
b.
Arched Set-Up Face Template No. 98500674
c.
Arched Double Door Facing Guide No. 96900840
d.
Basic Black Louvers No. 96200801
e.
Andiron, Lodge Ring No. 96700641
f.
Andiron, Traditional Urn No. 96700643
g.
Andiron, Traditional Ring No. 96700642
h.
Studio Trim For Basic Grills-Satin Black 3-sided No. 95400427
i.
Studio Trim For Basic Grills-Satin Black 4-sided No. 95400426
j.
Glass Trim, Nickel No. 95900334
k.
Ironworks, Handle Lodge Ring No. 96500871
Model 564 Diamond-Fyre GSR2: Direct Vent No. 98500250.
1.
Framing Dimensions: 36-1/2 inches (927 mm) wide by 38 inches (965 mm) high by
17-1/4 inches (438 mm) deep.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Provide with Linear Burner, Remote Fans.
4.
Heater Input: Up to 20,500 BTU/hr with natural gas or propane.
5.
Faces:
a.
Basic Grills, Black No. 96200808
b.
Classic Arch, Black Painted No. 95400402
c.
French Country, Black Painted No. 95400408
d.
Artisan, Charcoal No. 95400418
e.
Artisan, Hand-Rubbed Bronze Patina No. 95400417
f.
Metropolitan, Black No. 95400411
g.
Shadowbox, Brushed Nickel No. 95400428
h.
Shadowbox, Satin Black No. 95400430
i.
Architectural Rectangular Double Doors No. 95400467
j.
IronWorks, Hand-Rubbed Bronze Patina No. 95400436
k.
Timberline, Hand-Rubbed Bronze Patina No. 95400435
l.
Black Louvers No. 96200801
10305-7
6.
7.
8.
K.
Interior Style:
a.
Fireback - Stainless Steel No. 96100208.
b.
Fireback - Black Painted No. 96100211.
c.
Fireback - Black Enamel No. 96100210.
Glass:
a.
Crushed Glass Media: Bronze No. 94500581.
b.
Crushed Glass Media: Cobalt Blue No. 94500582.
c.
Crushed Glass Media: Platinum Glass No. 94500580.
Accessories:
a.
Arched Face Upgrade Kit No. 98500674.
b.
Arched Face Upgrade Kit No 98500683.
c.
Arched Double Door Facing Guide No. 96900840.
d.
Brushed Nickel Velo Plated Covers No. 96200805.
e.
8 inch Minimum Rear Vent Kit No. 98900168.
f.
Flue Adapter, DV No. 98900165.
g.
Studio Trim For Basic Grills - Brushed Nickel 3-sided No. 95400421.
h.
Studio Trim For Basic Grills - Brushed Nickel 4-sided No. 95400431.
i.
Studio Trim For Basic Grills - Satin Black 3-sided No. 95400427.
j.
Studio Trim For Basic Grills - Satin Black 4-sided No. 95400426.
k.
Glass Trim, Brushed Nickel Velo No. 95900335.
l.
Driftwood Twigs & Stone No. 94500960.
Model 864 See-Thru, Top or Rear Vent GSR2: Direct Vent. No. 98500176.
1.
Framing Dimensions: 41-1/4 inches (1048 mm) wide by 38-1/2 inches (978 mm) high
by 20-3/4 inches (527 mm) deep.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Provide Two-Stage Tube burner.
4.
Heater Input: Up to 31,000 to 16,000 BTU/hr variable pressure regulator using natural
gas or propane.
5.
Front and Rear Faces:
a.
Basic Grills, Black No. 96200808
b.
Classic Arch, Black Painted No. 95400402
c.
French Country, Black Painted No. 95400408
d.
Artisan, Charcoal No. 95400418
e.
Artisan, Hand-Rubbed Bronze Patina No. 95400417
f.
Metropolitan, Black No. 95400411
g.
Shadowbox, Brushed Nickel No. 95400428
h.
Shadowbox, Satin Black No. 95400430
i.
Architectural Rectangular Double Doors No. 95400467
j.
IronWorks, Hand-Rubbed Bronze Patina No. 95400436
k.
Timberline, Hand-Rubbed Bronze Patina No. 95400435
l.
Black Louvers No. 96200801
6.
Firebacks:
a.
Common Brick No. 96100824.
b.
Herringbone No. 9600830
c.
Stainless Steel No. 985002451/98500249.
d.
Hand-Made Brick No. 96100825.
e.
Black Enamel No. 96100827.
f.
Ledgestone No. 96100831.
7.
Andirons:
a.
Wrought Iron No. 98500632.
b.
Colonial No. 98500631.
c.
Arabesque No. 98500633.
8.
Accessories:
a.
Upgrade Face Kit No. 98500686.
10305-8
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
q.
r.
Arched Set-Up Face Kit No. 98500688.
Arched Double Door Facing Guide No. 96900842
Basic Black Louvers No 91002162
8 inch (203 mm) Minimum Rear Vent Kit No. 98900168.
Flue Reducer No. 98900165.
Power Heat Duct Kit No. 98500769.
Wall Thermostat No. 99300650.
GS Remote Control No. 99300690 (NG).
GS Remote Control No. 99300688 (LP).
Wall Timer No. 99300661.
Fan No. 564/864 TRV GS 99000162.
Studio Trim for Basic Face, Brushed Nickel, 3-Sided No. 95800644.
Studio Trim for Basic Face, Brushed Nickel, 4-Sided No. 95800648.
Studio Trim for Basic Face, Satin Black, 3-Sided No. 95800626.
Studio Trim for Basic Face, Satin Black, 4-Sided No. 95800625.
Glass Trim, Nickel No. 95900336.
Ironworks, Handle Lodge Ring No. 96500871.
L.
Model 864 Top or Rear Vent Clean Face GSR2: Direct Vent. No. 98500175.
1.
Framing Dimensions: 42-3/4 inches (1086 mm) wide by 44-3/4 inches (1137 mm) high
by 22-1/2 inches (571 mm) deep.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Provide Two-Stage Tube burner.
4.
Heater Input: Up to 31,000 to 16,000 BTU/hr variable pressure regulator using natural
gas or propane.
5.
Firebacks:
a.
Common Brick No. 96100824.
b.
Herringbone No. 9600830
c.
Stainless Steel No. 985002451/98500249.
d.
Hand-Made Brick No. 96100825.
e.
Black Enamel No. 96100827.
f.
Ledgestone No. 96100831.
6.
Andirons:
a.
Wrought Iron No. 98500632.
b.
Colonial No. 98500631.
c.
Arabesque No. 98500633.
7.
Accessories:
a.
Upgrade Face Kit No. 98500686.
b.
Arched Set-Up Face Kit No. 98500688.
c.
Arched Double Door Facing Guide No. 96900842.
d.
8 inch (203 mm) Minimum Rear Vent Kit No. 98900168.
e.
Flue Reducer No. 98900165.
f.
Power Heat Duct Kit No. 98500769.
g.
GS Remote Control No. 99300693 (NG).
h.
GS Remote Control No. 99300692 (LP).
M.
Model 864 High Output GSR2: Direct Vent. No. 98500184.
1.
Framing Dimensions: 41-1/4 inches (1048 mm) wide by 48 inches (1219 mm) high by
22-3/4 inches (578 mm) deep.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Burner:
a.
Ember-Fyre Burner NO. 96900144
b.
Dancing-Fyre Burner NO. 96900141
c.
Diamond-Fyre Burner NO. 96900142
10305-9
4.
5.
6.
7.
8.
N.
d.
Driftwood Fire Art "B" NO. 94500572
e.
Fyre-Stones Kit "C" NO. 94700764
Heater Input: Up to 47,000 BTU/hr variable pressure regulator using natural gas or
propane.
Faces:
a.
Basic Grills, Black No. 96200808
b.
Classic Arch, Black Painted No. 95400402
c.
French Country, Black Painted No. 95400408
d.
Artisan, Charcoal No. 95400418
e.
Artisan, Hand-Rubbed Bronze Patina No. 95400417
f.
Metropolitan, Black No. 95400411
g.
Shadowbox, Brushed Nickel No. 95400428
h.
Shadowbox, Satin Black No. 95400430
i.
Architectural Rectangular Double Doors No. 95400467
j.
IronWorks, Hand-Rubbed Bronze Patina No. 95400436
k.
Timberline, Hand-Rubbed Bronze Patina No. 95400435
l.
Black Louvers No. 96200801
Firebacks:
a.
Common Brick No. 96100824.
b.
Diamond Mosaic/Stucco No. 96100830.
c.
Stainless Steel No. 96100829.
d.
Hand-Made Brick No. 96100825.
e.
Black Enamel No. 96100827.
f.
Ledgestone No. 96100831.
Andirons:
a.
Wrought Iron No. 98500632.
b.
Colonial No. 98500631.
c.
Arabesque No. 98500633.
Accessories:
a.
Upgrade Face Kit No. 98500686.
b.
Arched Set-Up Face Kit No. 98500688.
c.
Arched Double Door Facing Guide No. 96900842.
d.
Basic Black Louvers No 91002162.
e.
Brushed Nickel Velo No. 91002165.
f.
8 inch (203 mm) Minimum Rear Vent Kit No. 98900168.
g.
Flue Adapter No. 98900165.
h.
Power Heat Duct Kit No. 98500769.
i.
Wall Thermostat No. 99300650.
j.
Remote Control (for use w/out optional fan) No. 99300646.
k.
Studio Trim for Basic Face, Brushed Nickel, 3-Sided No. 95800647.
l.
Studio Trim for Basic Face, Brushed Nickel, 4-Sided No. 95800648.
m.
Studio Trim for Basic Face, Satin Black, 3-Sided No. 95800626.
n.
Studio Trim for Basic Face, Satin Black, 4-Sided No. 95800625.
o.
Glass Trim, Nickel No. 95900336.
p.
8 inch Vent 864 HO Min Kit C No. 96200316.
q.
Ironworks, Handle Lodge Ring No. 96500871
Model 864 See-Thru GSR2: Direct Vent. No. 98500193.
1.
Framing Dimensions: 44 inches (1118 mm) wide by 38-1/2 inches (977 mm) high by
26 inches (660 mm) deep.
2.
Vent: 8 inches (203 mm) outer diameter. Use Simpson Dura-Vent with horizontal or
vertical Duravent terminations only.
3.
Provided Dual Pan burner.
4.
Heater Input: Up to 37,500 to 14,700 BTU/hr (NG), 10,000 BTU/hr (LP).
5.
Faces: (two required one each side)
a.
Basic Grills, Black No. 96200808
10305-10
6.
7.
8.
b.
Classic Arch, Black Painted No. 95400402
c.
French Country, Black Painted No. 95400408
d.
Artisan, Charcoal No. 95400418
e.
Artisan, Hand-Rubbed Bronze Patina No. 95400417
f.
Metropolitan, Black No. 95400411
g.
Shadowbox, Brushed Nickel No. 95400428
h.
Shadowbox, Satin Black No. 95400430
i.
Architectural Rectangular Double Doors No. 95400467
j.
IronWorks, Hand-Rubbed Bronze Patina No. 95400436
k.
Timberline, Hand-Rubbed Bronze Patina No. 95400435
l.
Black Louvers No. 96200801
Firebacks:
a.
Reversible Common Brick/Herringbone Brick No. 96100184.
b.
Reversible Diamond Mosaic/Stucco No. 96100186.
c.
Stainless Steel No. 96100188.
d.
Black Enamel No. 96100185.
Andirons:
a.
Wrought Iron No. 98500632.
b.
Colonial No. 98500631.
c.
Arabesque No. 98500633.
Accessories:
a.
Basic Grill Set No. 91002161.
b.
Basic Black Louvers No 91002162.
c.
Brushed Nickel Velo No. 91002165.
d.
Upgrade Face Kit No. 98500686.
e.
Arched Set-Up Face Kit No. 98500688.
f.
Arched Double Door Facing Guide No. 96900842
g.
8 inch (203 mm) Minimum Rear Vent Kit No. 98900168.
h.
Flue Reducer No. 98900165.
i.
Power Heat Duct Kit No. 98500769.
j.
Wall Thermostat No. 99300650.
k.
GS Remote Control No. 99300693 (NG).
l.
GS Remote Control No. 99300692 (LP).
m.
GS Remote control on/off thermostat No. 99300689.
n.
Trim, Studio 864 Brushed Nickel 3 sided No. 95800644.
o.
Trim, Studio 864 Brushed Nickel 4 sided No. 95800648.
p.
Trim, Studio 864 Satin Black 3 sided No. 95800626.
q.
Trim, Studio 864 Satin Black 4 sided No. 95800625.
r.
Glass Trim, Brushed Nickel No. 95900336.
s.
Ironworks, Handle Lodge Ring No. 96500871.
PART 3 EXECUTION
3.1
3.2
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect of
unsatisfactory preparation before proceeding.
C.
Verify proper power supply and fuel source are available.
PREPARATION
A.
Clean surfaces thoroughly prior to installation.
B.
Prepare surfaces using the methods recommended by the manufacturer for achieving the
10305-11
best result for the substrate under the project conditions.
3.3
3.4
INSTALLATION
A.
Install in accordance with manufacturer's instructions, ANSI Z21.44 and the requirements of
authorities having jurisdiction.
B.
Use manufacturer's guidelines for minimum clearances to combustibles, walls, and finishes.
C.
Anchor all components firmly in position for long life under hard use.
D.
Upon completion of installation, visually inspect all exposed surfaces. Touch up scratches
and abrasions with touch up paint recommended by the manufacturer; make imperfections
invisible to the unaided eye from a distance of 5 feet (1.5 m).
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
10305-12