Conformis Information

advertisement
iForma™ Knee Interpositional Device
The ConforMIS iForma is a minimally invasive treatment option for patients with mild-to-moderate osteoarthritis in either the
inner (medial) or outer (lateral) compartment of the knee.
Each iForma is designed from a patient's own MRI scan. The diagnostic scan provides information about the shape and
condition of the knee. If you and your surgeon determine that you are a good candidate for the iForma, that data is then used
to design a personalized implant.
The iForma slips into the knee between the thigh bone and the shin bone. Because of the personalized design, the iForma
closely conforms to the natural shape of your joint, using the anatomic features to retain its proper position. No bone cuts or
cartilage removal is required.
Once inserted, the iForma restores the geometry of your joint and realigns the knee. It also provides a smooth articulating
surface for the end of your thigh bone, preventing painful bone-on-bone rubbing. Patients should be able to return to light to
moderate activity after recovery and may delay the progression of disease due to improper loading of one compartment.
By preserving the joint, the iForma maintains the ability to safely move to more invasive knee replacement options at a later
date, if one becomes necessary. This may be particularly important for patients considered too young for traditional knee
replacement.
iForma Features:







Treats mild-to-moderate osteoarthritic degeneration
Manufactured for each patient based on information from their MRI scan
Minimally invasive, minimally traumatic procedure
2-3 inch average incision length, typically a 40-60 minute procedure
No bone cuts or articular cartilage removal required
Preserves the ability to move to other treatment options in the future
May result in less post-operative pain and faster recovery
The iForma Process:
If you and your surgeon believe that you may be a good candidate for an iForma, your surgeon will give you a prescription for a
ConforMIS knee MRI scan. After reviewing the scan to ensure that you are indeed a good candidate, your surgeon will send in
an order to produce the implant. Your iForma should be available in approximately four weeks from receipt of the order.
Following surgery, your care will focus on swelling and pain management. You may wear a brace for a few weeks. Your surgeon
will also prescribe exercises and activities to strengthen your knee muscles. Patients are generally able to walk and weight-bear
within 2 weeks following surgery, but each patient is unique and only you and your surgeon can determine your tolerance and
level of ability. For optimal recovery, activities that stress the knee should be resumed slowly and as tolerated, allowing your
knee adequate time to adapt to the implant.
iUni™ Unicompartmental Knee Resurfacing Device
The iUni (the "i" stands for individualized) is a unicompartmental knee resurfacing device designed for patients with arthritic
damage limited to either the medial or lateral compartment. Together with the iDuo, the iUni provides patients with a range of
partial knee resurfacing options in earlier stages of arthritis.
Many patients who receive a total knee replacement today actually have damage in just one compartment. Total knee
replacements require your surgeon to remove healthy tissue from all three compartments (click here to review knee
anatomy). In addition, standard implants require your surgeon to choose from a variety of standard sized implants and to cut
your bones to fit the implant.
ConforMIS has developed the only personalized unicompartmental knee implant designed to conform precisely to your own
unique anatomy. Using iFit technology and information from a standard CT scan, ConforMIS creates a personalized implant
designed to resurface just the affected compartment.
Personalized implants offer unique advantages versus traditional knee replacement options. Because each ConforMIS device is
created specifically for you, the implants exactly mirror the surface contours of your knee, providing far more bone
preservation. The implants also provide an anatomic fit with less bone cutting than traditional options.
Patients with unicompartmental disease are able to preserve their knee for future treatment options and may also experience
faster recovery time and reduced post-operative pain than with traditional total knee replacement. In addition, our unique iJig
instrumentation can improve alignment and provide a more natural feel to the knee, which can reduce implant wear and
extend longevity.
iUni Features:






Manufactured for each patient, based on their individual anatomy
Minimally invasive, minimally traumatic procedure
Bone and cartilage preserving
Appropriate for young and active patients
Potential for less post-operative pain and shorter post-operative recovery
Preserves the ability to move to other treatment options in the future
The iUni Process:
Should you and your surgeon determine you are a good candidate, your surgeon will give you an order for a ConforMIS knee
scan at a local CT imaging center. Your CT scan will be sent to ConforMIS for review and implant production. Your iUni should be
available in approximately six weeks from receipt of the scan.
The personalized implant will be shipped to your surgeon along with personalized surgical instruments derived from your CT
scan called iJigs. The iJigs will guide the surgeon in determining the precise placement of your implant.
Following surgery, your care will focus on reducing and controlling swelling, pain management and physical therapy. You may
wear a brace for a few weeks. Your surgeon and physical therapist will also prescribe exercises and activities to strengthen your
knee muscles.
Patients are generally able to walk and weight-bear within 2 weeks following surgery. For optimal recovery, activities that
stress the knee and weight-bearing should be resumed slowly and only as tolerated, allowing your knee adequate time to adapt
to the implant.
While every patient's experience is different, you should expect to feel significant pain and function improvement within 2 to 3
months of your procedure and should be able to return to most activities within 3 to 6 months.
iDuo™ Bicompartmental Knee Resurfacing Device
The ConforMIS iDuo (the "i" stands for individualized) is a bi-compartmental knee resurfacing device designed for patients with
arthritic damage to either the medial or lateral compartment plus the patellofemoral compartment located behind the knee
cap. Together with the iUni, the iDuo provides patients with a range of partial knee resurfacing options in earlier stages of
arthritis.
Many patients who receive a total knee replacement today actually have damage involving either the inner or outer
compartment plus the area behind the knee cap. Total knee replacements require your surgeon to remove healthy tissue from
all three compartments (click here to review knee anatomy). In addition, traditional implants require your surgeon to choose
from a variety of standard sized implants and to cut your bones to fit the implant.
ConforMIS has developed the only personalized bicompartmental knee implant designed to conform precisely to your own
unique anatomy. Using iFit technology and information from a standard CT scan, ConforMIS creates a personalized implant
designed to resurface just the affected compartment.
Personalized implants offer unique advantages versus traditional knee replacement options. Because each ConforMIS device is
created specifically for you, the implants exactly mirror the surface contours of your knee, providing far more bone
preservation. The implants also provide an anatomic fit with less bone cutting than traditional options.
Patients with bicompartmental disease are able to preserve their knee for future treatment options and may also experience
faster recovery time and reduced post-operative pain than with traditional total knee replacement. In addition, our unique iJig
instrumentation can improve alignment and provide a more natural feel to the knee, which can reduce implant wear and
extend longevity.
iDuo Features:






Manufactured for each patient, based on their individual anatomy
Minimally invasive, minimally traumatic procedure
Bone and cartilage preserving
Appropriate for young and active patients
Potential for less post-operative pain and shorter postoperative recovery
Preserves the ability to move to other treatment options in the future
The iDuo Process:
Should you and your surgeon determine you are a good candidate for the iDuo, your surgeon will give you an order for a
ConforMIS knee scan at a local CT imaging center. Your CT scan will be sent to ConforMIS for review and implant production.
Your iDuo should be available in approximately six to eight weeks from receipt of the scan.
The personalized implant will be shipped to your surgeon along with personalized surgical instruments derived from your CT
scan called iJigs. The iJigs will guide the surgeon in determining the precise placement of your implant.
Following surgery, your care will focus on reducing and controlling swelling, pain management and physical therapy. You may
wear a brace for a few weeks. Your surgeon and physical therapist will also prescribe exercises and activities to strengthen your
knee muscles.
Patients are generally able to walk and weight-bear within 2 weeks following surgery. For optimal recovery, activities that
stress the knee and weight bearing should be resumed slowly and only as tolerated, allowing your knee adequate time to adapt
to the implant.
While every patient's experience is different, you should expect to feel significant pain and function improvement within 2 to 3
months of your procedure and should be able to return to most activities within 3 to 6 months.
Download