NATIONAL INSTITUTE OF TECHNOLOGY: TIRUCHIRAPPALLI – 620 015
International Conference on Advances in Design & Manufacturing 2014
List of extended abstracts selected for full paper preparation and oral presentation in ICAD&M’14
Sl.
No.
239
Paper
ID
DM301
240
DM302
241
DM303
242
DM304
243
DM306
244
DM307
245
DM308
246
DM309
247
DM310
248
DM312
249
DM313
250
DM314
251
DM315
Title of the Paper
Author(s)
K.N.Balan,S. Manimaran, Alex Luke K.A
Investigation Of Tribiological Behaviour Of
T. Deeran Kumar, Sathyabama University,
Thermal Spray Coated Surfaces By RSM
Chennai
Detection of Isomorphism and Inversions in
Hemraj Singh, Vijay Pal Singh, National
Kinematic Chains Using Hamming Number
Institute of Technology, Kurukshetra
Technique
Influence of Particle Size in the Wear
Mohan Babu, Edward Kennedy, Ambigai,
Behavior of Al-Si-B4 C Developed
Kumarasamy, GNIT Hyderabad
composite prepared Using stir casting
P. Chennakesava, Y. Shivraj Narayan,
Vallurupalli, Nageswara Rao, Vignana
Fused Deposition Modeling - Insights
Jyothi Institute of Engineering &
Technology, Hyderabad
Application Of Pca Based Hybrid Taguchi
P.Sivaiah, S.Md.Yonus, Venkata Ajay
Method For Multi-Response Optimization
Kumar.G, Annamacharya Institute of
Of
Cnc
Milling
Of
Composite
Science and Technology, Rajampet
Al6063+5%Sic And Al6063+10%Sic
Design and Study of performance of nano- Revathy G, Prof. Abdul Razak,
scale FINFETs with reduced switching Birla Institute of Technology and Science,
energy
Pilani- Dubai
Design Of Helical Spring Using Composite
S.Karthik Subramanian, M.Varun Siddarth
Material
Parametric Optimization Of Cnc Turning M.Nataraj, K.Balasubramanian
Process For Hybrid Metal Matrix Government College of Technology,
Composite
Coimbatore
M.Nataraj, K.Balasubramanian
A Comparitive Study On Wear Performance
Government College of Technology,
Of Al 6063 Metal Matrix Hybrid Composite
Coimbatore
Balakumar
iyer.S,
Vivekanandan.M,
Enhancing performance of vertical axis Shivkumar.R, MuthuPandy P,Karthikeyan
wind turbine by passive dynamic stall N, Dr. Zakariya Kaneesamkandi
control
Anna University Chennai, BIT Campus,
Trichy
Influence of Structural Distortions on Type
304 Stainless Steel 90° Pipe Bends with Sumesh S, AR. Veerappan, S Shanmuga
Critical
Circumferential
Throughwall National
Institute
of
Technology,
Cracks under Bending Moment and Internal Tiruchirappalli
Pressure
Prediction of white layer formation of AISI Umamaheswari.M,
N.RameshBabu,
52100 steel in grinding by power L.Vijayaraghavan
measurement
Indian Institute of Technology, Madras
Computer Aided Automatic Water Pipe Manish Kumar Mishra1, Kailash Jha,
Network Analysis
ISM, Dhanbad
Six Sigma Enabled Service Quality
Assessment – An Engineering College Case
Study
Experimental Investigation And MultiObjective
Optimization Of
Process
Parametrs In Edm Drilling
Risk Analysis For Manufacturing Industry
Using FMEA
Dr M Shanmugaraja
Park College of Technology, Coimbatore
252
DM316
253
DM317
254
DM318
255
DM319
256
DM320
257
DM321
258
DM322
259
DM324
260
DM325
261
DM326
262
DM327
263
DM328
Mechanical Properties Of Ni-Nano Sic A.Baraniraj, R.Malayalamurthi,
Composite Coating On Aluminium Alloy Government College of Engineering,
A319 By Eletrodeposition
Salem
DM329
Vigneshkumar.K, Deivanayagam.S,
Evaluation Of Safety And Health Hazards
V.Karthikeyan, Abdul Zubar, Knowledge
In Foundries Using Hira
Institute of Technology, Salem
265
DM330
R.Gowrishankar, M.Nagarajan, K.Visagavel
Hazard Operability In Chemical Flow Lines
Knowledge Institute of Technology, Salem
At Effulent Treatment Plant
266
DM331
Design and Optimization of Low Pressure
Sculptured Diaphragm with Burst Pressure D.Sindhanaiselvi, Dr.R. Ananda Natarajan,
Dr.T.Shanmuganantham, Pondicherry
and Stress Analysis
264
Arun Bharathi R, Ashoka Varthanan P,
Boopathi T, Sri Krishna College of
Engineering Technology, Coimbatore
K.Karthick, N.Venkatesh, M.Yuvaraj
Knowledge Institute of Technology
Sibi Krishnan.V, Vishnu Narayanan.M,
Design and Optimization of Tube in Tube
Sarin Shaji.M, Akshaya college of
Heat Exchanger by Helical Baffles
engineering and technology,Coimbatore
Ramkumar.K, Raju.C, C.Sathiya Narayanan
Design and analysis of multiple tools for
Dhanalakshmi Srinivasan Institute of
incremental forming of sheet metals
Technology, Trichy
Digital Mammogram: Image Enhancement
Using Fuzzy based Contrast-Limited Sheeba Jenifer, S. Parasuraman, Amudha
Adaptive
Histogram
Equalization Kadirvelu, Monash University Malaysia
Algorithm
EMG-Torque correlation on Human Upper
Veronica JL, S.Parasuraman
extremity using Evolutionary
Monash University Malaysia
Computation.
M. Sailender, Dr. G. Chandra Mohan
Effect of Process Parameters on Mechanical
Reddy,Dr. S. Venkatesh
Properties in Submerged Arc Welding
Hindustan
Aeronautics
Limited,
Using DOE
Bangalore
Rintu George Thomas, Biju Prasad B,
Optimal Design of Abrading Tool Bit for
Deviprasad Varma P R, Mar Athanasius
Planetary Rock Abrading Applications
College of Engineering, Kerala
Effect of Cover Plate Off-Set in Hyper
P.Subramaniam, R.Marappan, Sengunthar
Elastic Semi Cylindrical Fluid Filled Robot
Engineering College, Tiruchengode
Finger on its Load Lifting Ability
Bala Sundar Rao Ramisetty, Ranganath G,
Heat Transfer and Pressure Drop
Ranganayakulu C, Anna University,
Correlations of Rectangular Perforated Fin
Chennai
Surface of a Compact Heat Exchanger
Engineering College, Pondicherry
DM332
HarshaVardhan S, Dheeraj K V S, Dr.
Design and Analysis of Detachable Foot
Pannirselvam K, National Institute of
Operated Lid Actuation Mechanism
Technology Tiruchirappalli
268
DM333
B.Rajarethinam, V.S.Manigandan,
Hira For Plating And Powder Coating Shop
J.Anbarasu, Knowledge Institute of
In Manufacturing Industry
Technology, Salem
269
DM335
Safety,
Health,
Environment
And D.sankar prasath , M.Sathyanathan, H.Abdul
Ergonomics (Shee) Failure Mode Effective Zubar, Knowledge Institute of Technology,
Analysis
Salem
270
DM336
Implementing loto system in
industry
271
DM337
Hira For Paint And Machine Shop In
Automobile Industry
272
DM338
T.Benson Solomon , A.Elavarasi ,
Emergency preparedness in An effluent
S.Subramaniyan, H.Abdul Zubar,
treatment Plant
Knowledge Institute of Technology, Salem
273
DM339
P.Velmurugan, K.Sankaranarayanasamy
Analytical Investigation on Ride Comfort
and K.Pazhanivel, RVS School of
Analysis for Tractor Semitrailer
Engineering and Technology, Dindigul
274
DM340
Water Management Design for the L. Arun Kumar, Dr.P.Velmurugan,
Enhanced Performance of Air-Breathing P.Ananda kumar, RVS Educational Trust’s
Proton Exchange Membrane Fuel Cell
Group of Institutions, Dindigul
267
Cement
R.Gowtham kumar, ,A.Selva Kumar
K.Visagavel, Knowledge Institute of
Technology, Salem
R.Karthick, K.N.Karthick , J.Anbarasu
Knowledge Institute of Technology, Salem
Prashantha.S, A.G.Shivasiddaramaiah,
275
DM341
Synthesis and Characterization of Cu-Al-Be U.S.Mallikarjun, S.M.Shashidhara
Ternary Shape Memory Alloys Prepared by
Siddaganga Institute of Technology,
Induction Melting Technique
Tumkur
276
DM342
Structural Design and Analysis
Horizontal Axis Wind Turbine Blade
277
DM343
Optimization of Flux Cored Arc Welding B. Senthilkumar, R. Madesh, Kumaraguru
Process Parameters by using GA
College of Technology, Coimbatore
DM344
Narayanasamy.P, Ravindran.P,
Hybridizing Graphite particles with SiC to
Balasundar.P, Kamaraj College of
enhance the Tribological behaviour of
Engineering and Technology,
Aluminium composites
Virudhunagar
278
of
P. Emmanuel Nicholas, K.P.Padmanaban,
D.Vasudevan, PSNA College of
Engineering and Technology, Dindigul
279
DM345
Investigation Of Mechanical Properties Of B. Ramgopal Reddy, D. Subramanya
Kenaf
Fiber
Reinforced
Polymer Atchyuth, R.V.R & J.C.College of
Composites
Engineering, Guntur
280
DM346
An analysis of Hybrid Data mining
S.Premalatha , N.Baskar, Saranathan
Simulated Annealing Algorithm (HDSA)
College of Engineering ,Tiruchirapalli
for single machine scheduling problem
281
DM347
Minimization of Mean Tardiness in Hybrid M. Saravanan, S. Sridhar, N. Harikannan
Flow Shop with Missing Operations Using Sri Subramanya College of Engineering
Genetic Algorithm
and Technology, Palani
282
DM348
283
DM349
284
DM350
285
DM351
Minimization the Transportation Cost in
Multi-Row Layout Problem with Flexible
Manufacturing System Using Evolutionary
Algorithms
Influence of Bonding Time on the
Mechanical
and
Metallurgical
Characteristics of Powder Metallurgically
Produced Pure Aluminium and Pure Copper
Diffusion Bonded Bimetallic Joints
Systematic assessment of backhoe assembly
line for reduction of ergonomic issues and
improvement of workplace.
Dynamic Analysis Of A Single Compliant
Leg Of A Stewart-Gough Type Parallel
Mechanism
Sri Subramanya College of Engineering
and Technology, Palani
A. Murugan, T. Senthilvelan, V.
Balasubramanian, Pondicherry
Engineering College, Puducherry
Ganeshraja.AVS, Vinoth.M , K.Visagavel
Knowledge Institute of Technology, Salem
M.Thangavel, A.M.Prabulingam
Sona College of Technology, Salem
S.Ashok Kumar , K.S.Prabakaran, ,
H.Abdul Zubar, Knowledge Institute of
Technology, Salem
DM352
Ergonomic
Evaluation
Of
Operation In Machinery Process
287
DM353
Assessment And Decision Making For A. Jayant, V. Kumar, V. Giri, and Leleur. S
Sustainable Transport: The Rail Baltica Sant Longowal Institute of Engineering &
Case Study
Technology, Punjab
288
DM354
Influence of Process parameters on forming
R. Sridhar, D. Rajenthirakumar
force in Single Point Incremental Forming
PSG College of Technology,Coimbatore
of polymers
289
DM355
Experimental Investigations and Analysis of J. Sathishkumar, V.Shrinivasan, P.Prakash
Machining Parameters for Machining EN8 ,M.Ganesan and N.Baskar, Saranathan
Material
College of Engineering, Tiruchirappalli
290
DM356
Design, Analysis and Fabrication of Poly
amide (Nylon 6) Porous Structured Scaffold
using Rapid Prototyping Method for
Medical Applications
291
DM357
Hazop Study For Sulphuric Acid Plant In
Process Industry
286
Manual
M. Saravanan S. Ganesh kumar,
Kumaresan T , Dr R.Gandhinathan ,
Dr .Ananthasubramanian, Banu Pradheepa
K, PSG College of Technology,
Coimbatore
L.Elanchelian, S. Rabiq Ali, J.Prakash
Knowledge Institute of Technology, Salem
292
DM358
Design and Development of Ragi-Thresher Krishna P, Balappa B U, Anil Kumar S
and De-Husking Machine
MSRUAS, Bangalore
293
DM359
Suman Gupta, Gagan Gupta, P. Chellapandi
Manufacturing Challenges of Intermediate
Indira Gandhi Centre for Atomic
Heat Exchanger: A Designer Perspective
Research, Kalpakkam
294
DM360
M.PraveenKumar, K.Mugundhan, H.Abdul
Prevention Of Accident Occurrence In
Zubar, Knowledge Institute of Technology,
Manufacturing Industries
Salem
295
DM361
Advanced Ceramics as friction material in Javith Iqbal , Madhan raj
lubricated Clutch Systems
KSR College of Engineering, Namakkal
296
DM362
P.Sridevi, N.Arun, Shashank Gupta, Pankaj
Developing an agile based supply chain Jotiram Shinde, C.H.S.Vijay Krishna
model for Indian agro based products
National Institute of Technology,
Tiruchirappalli
297
DM363
Prevention
Of
Fire
Manufacturing Industry
298
DM364
Study Of Delamination In Drilling Sisal D.Shanmugam, Rama Thirumurugan,
Fiber Reinforced Polyester Composites Dr.Mahalingam College of engineering
Using Design Of Experiments
and Technology, Pollachi
299
DM365
300
DM366
Wear Performance
Composites
301
DM367
N.Maheswaran, S. Muthukumar ,
Experimental Analysis of Behavior Based
M.A.Rajeshkumar, Knowledge Institute of
Safety in Manufacturing Industry
Technology, Salem
302
DM368
Structural Analysis of Crane Hook Using S. Nageswara, Dr. T.Hariprasad, P.
the Finite Element Analysis (FEA) MallikarjunaRao, Sree Vidyanikethan
Approach
Engineering College, Tirupati
303
DM369
YadavalliSai Krishna, Nithin Venkataram,
Design and Development of a Mechanical
Arun R Rao, MSRSAS, Bangalore
Gripper for Apple Loading Application
DM370
Dry sliding wear Behaviour of Aluminium
A Anandha Moorthy, N Natarajan, P K
Alloy based Self Lubricating Hybrid Metal
Palani, A Anandha Kumar, S Satheesh,
Matrix Composite Using Taguchi’s
304
Hazards
In
Knowledge Institute of Technology, Salem
Multi-objective Optimization of Machining
Parameters in CNC Milling Using NSGA-II
of
P.Mohankumar, N.Narmadha, K.Visagavel
AA2024-B4C
M. Arunadevi, C.P.S. Prakash, DSCE,VTU
Bhargavi Rebba, N.Ramanaiah, K.Maha
Lakshmi, Andhra University,
Visakhapatnam
Techniques-Extended Abstract
305
DM371
306
DM372
307
DM373
308
DM374
309
DM375
310
DM376
311
DM379
312
DM380
313
DM382
314
DM383
315
DM384
316
DM386
317
DM387
Anna University, Chennai
Theoretical Analysis of Critical Design D.Senthilkumar, R.Ajaykrishnaa,
Parameters
for
Maximum
Thermal S.Thirumalinib, Amrita School of
Engineering, Coimbatore
Efficiency of Solar Stirling Engines
Design,
Manufacturing and
Design Mr.Vikas Deulgaonkar, Dr.Ashok Matani
Validation of Chassis Mounted Specialized
Government College of Engineering,
Structure for 8X8 All Terrain Vehicles
Amravati
Hazard Identification And Safe Accessing V. Deepak Raja, S.Sundaresan, Knowledge
System In Paint Shop
Institute of Technology, Salem
An Analysis Of Fire Prevention And Fire
Protection Systems For LPG Storage In R.Shyamsundar, S.Sureshbalaji, Knowledge
Institute of Technology, Salem
Manufacturing Industries
Optimization of Activated Flux TIG
Welding Parameters for Naval Structural Cdr Rishi Pamnani , Dr M Vasudevan, P
Material Using Response Surface Method Vasantharaja, IGCAR, Kapakkam
(RSM)
Upshot of Ultrasonic Amplitude on Poovazhagan.L Kalaichelvan.K Balaji.V.R
Developing the AA6061/SiCp Metal Matrix Amith.S.C, Haripriya.P, SSN College of
Engineering, Kanchipuram
Nanocomposites
Numerical Analysis of Two –fluid Cross Jyothiprakash K H, Ameer Ali R Inamdar,
flow Heat Exchanger in Thermal Y T Krishnegowda, V.Krishna ,
Communication with Surroundings using K.N.Seetharamu, P.E.S. Institute of
Technology, Bangalore
FEM.
Numerical Investigation of Sub Cooled
water flow in uniformly heat applied Jagan.V, Satheesh. A, VIT University,
Vellore
Bartolomei Boiling tube
Effect of Sintering Atmosphere and
Solution
Treatment
on
Density, R. Mariappan, M.Sudhahar, M.Sundeep, J.
Microstructure and Tensile Properties of M.Babu, P.Mathiyalagan, Vel-Tech
Duplex Stainless Steels Developed from University, Chennai
Pre-Alloyed Powders
Position analysis and rotation Angle
determination of six axis Robot trainer S.Geetha, U.Natarajan,
Anna University, Chennai
using kinematic Modeling
A Fuzzy based Failure Analysis in S.Praveen Kumar, R.Parameshwaran,
Electrical Switching Applications using A.Ananthi, Kongu Engineering College,
Erode
Weighted Geometric Mean Technique
Improving Effectiveness of Rotavator Dr. A.G. Matani, A. D. Bhishnurkar
Towards
Productivity
Increased
Agricultural Government College of Engineering,
Amravati
Optimization of wear parameters that Mohamed Zakaulla, A.R.Anwar khan,
influence the dry sliding wear behaviour of P.G.Mukunda, Ghousia College of
Al6061/Cu–SiC composites
Taguchi method.
by
using Engineering, Karnataka
318
DM388
R. Manikandan, P. Raj Mohan,
Hazop Study For Thermal Spray System In T. Dheenathayalan, Dr. H. Abdulzubar
An Heavy Engineering Industry
Knowledge Institute of Technonogy, Salem
319
DM389
Comprehensive evaluation on occupational S. Anandhababu, Mr. P. Vijay
hazards due to noise in foundry
Knowledge Institute of Technonogy, Salem
320
DM390
321
DM391
322
DM392
323
DM393
324
DM394
325
DM395
326
DM397
327
DM398
328
DM402
329
DM403
Hira And Fmea For Turbine Assembly Plant P.N. Vignesh, P. Raj Mohan,
Dr. PSS. Srinivasan,Knowledge Institute of
In An Heavy Engineering Industry
Technonogy, Salem
Analysis of body postures of employees in Arun Mohan , H.Abdul Zubar ,
bearing Manufacturing industry by using K.Visagavel
Knowledge Institute of Technology, Salem
ergonomic tools
Design and Modelling of an In-Pipe Ankit Nayak, S. K. Pradhan, NITTTR,
Inspection Robot
Bhopal
Mathematical
Modeling
and
Implementation of Predictive Control
schemes to nonlinear thermal process
Effect of Sintering Atmosphere and
Solution
Treatment
on
Density,
Microstructure and Tensile Properties of
Duplex Stainless Steels Developed from
Pre-Alloyed Powders
P. Dhinakaran , D. Manamalli, Madras
Institute of Technology, Chennai
R. Mariappan , M.Sudhahar, M.Sundeep, J.
M.Babu, P.Mathiyalagan,
Vel-Tech University, Chennai
Inverse Dynamics of Cracked Cantilever Mitesh J. Mungla, D. S. Sharma, Hardik
Makwana, R. R. Bhavsar, Nirma
Beam
University, Ahmedabad
Studies on Microstructure, Mechanical
Properties and Corrosion Behaviour of Mg- S Manivannan, S P Kumaresh Babu,
Srinivasan Sundarrajan, National Institute
6Al-1Zn Magnesium Alloy by Cerium
of Technology, Tirchirappalli
Addition
Sankar Rajan, Vadivel kannan,
Mechanical behavior of mudar fiber Poosappan Yesodha, Dr. K. Marimuthu
reinforced Epoxy composite
Coimbatore Institute of Technology,
Coimbatore
Application of Taguchi and ANOVA in the
Optimization of Process Parameter Levels
for Surface Finish and Hole Diameter Ramesh B, Elayaperumal A, Satishkumar S,
CEG, Anna University, Chennai
Accuracy in Dry Drilling of Thick
Pultruded Composites
An Investigation Of Mechanical Properties
T.Kasirajan, Dr.R.Ravindran
Of Aluminum Alloy 6061-T6 Welded By
S.Dharani kumar, Dr.Mahalingam,
Tig And Friction Stir Welding Processes
College of Engineering & Technology
330
DM404
331
DM405
332
DM406
334
DM407
335
DM411
336
DM412
337
DM413
338
DM414
339
DM415
340
DM417
341
DM418
342
DM421
343
DM422
344
DM424
Viswanathan R and Ramesh S
Optimization Of Machining Parameters For
Turning Of Magnesium Alloy Using Kongunadu College of Engineering and
Response Surface Methodology
Technology, Thottiyam
Kavin.C, Anirudh.R.S Mani.N, Sri Sairam
Design Of Steering Mechanism Of A GoEngineering college,
Kart Vehicle
Chennai
Analysis of Supply Chain Conflicts in a
Franklin R. John, R. Jayachitra
Distribution Channel Using Colored Petri
PSG College of Technology, Coimbatore
Nets
Experimental Study and Optimization of
Process Parameters on Thrust Force Based
Ramesh B, Elayaperumal A, Satishkumar S
on Taguchi and ANOVA During Drilling of
CEG, Anna University, Chennai
GFRP Polymeric Composites Manufactured
by Pultrusion Method
Experimental
Investigations
on
the
C.Sivakandhan, P.Suresh Prabhu,
Performance of Hybrid Composite Drive
Karpagam University, Coimbatore
Shaft
K. Kumar, R. Ravikumar
Modeling And Optimization Of Wire Edm
Process
Anna University,Trichy
Analysis
of
Aerodynamic
Force
Performance on Sedan Car Model using
CFD
Investigations on the Mechanical Properties
and Microstructure of Copper and AISI 430
Ferritic Stainless Steel Using Friction
Welding
Multi Response Optimization Of Process
Parameters
In
Electrical
Discharge
Machining Of Al6061-6%Tib2 In-Situ
Metal Matrix Composite
Modeling and Control of Vibration of Smart
Cantilever Beam with Tip Mass Using
Piezoelectric Material
K.Kanthavel, G.Shankar
Anna University Regional Centre
Coimbatore
C.Shanjeevi, S.Satish Kumar, P.Sathiya
Sathyabama University, Chennai
A. Mahamani, P. Salonica Sravani
Sri Venkateswara College of Engineering
and Technology, Andhra Pradesh
B. Selvam, U. Natarajan and
R. Atchudhan, A.C. College of Engineering
and Technology, Karaikudi
Manowar Hussainr, Pankaj Kumar,
Drilling of Micro Holes on Soda-lime Glass
Purushottam Kumar Singh, Amit Rai Dixit,
through
Electrochemical
Discharge
Alok Kumar, Indian School Of Mines,
Machining Process
Dhanbad
Fabrication and Characterization of a
Priya Rathi A, Vimala Juliet A, SRM
Microfluidic Cell Counter made of Low
University, Chennai
Temperature Co-fired Ceramic (LTCC)
N.JagadeeshKumar, D.Meganathan,
Design and Analysis of CNTFET based
V.Venkatesh, P.Namachivayam
SRAM in 32nm technology
Madras Institute of Technology, Chennai
Evaluation Of Tensile Properties On P.G. Karuppannaraja , M. Rajkumar and
Natural Fiber Reinforced Composites Using K.P.padmanaban, Anna University, Chennai
345
DM427
346
DM428
347
DM429
348
DM430
349
DM435
350
DM436
351
DM437
352
DM439
353
DM442
354
DM443
355
DM445
356
DM446
357
DM448
358
DM449
359
DM450
Banana, Zea Mays And Areca Nut Fibers
Design of a Finite Element Based Sensor
for Determination of Sulphur Content in
Crude Oil
Machinability Assessment Of Aisi 4140
Alloy Steel Using Response Surface
Methodology And Taguchi Grey Relational
Analysis
Developed numerical model for machine
cell formation and duplicating exceptional
elements
A fuzzy multi-objective based un-related
parallel machines scheduling problem with
sequence and machine dependent setup
times
Tribological Wear Characteristics of Duplex
Stainless Steels Prepared from 316L and
430L
Powders
Sintered
Different
Atmospheres
Experimental Investigation of Surface
roughness of SS-202 in Die-Sinking EDM
Design and Analysis of Hybrid Composite
Leaf Spring
Analysis Of Mechanical Properties Of
Hybrid Burmese Silk Orchid And Glass
Fibers
Composite
Material
Using
Automotive Application
Minimization
of
Cellular
Complexity Index using TRIZ
Anuj Abraham, Pappa N., Lijin V Jacob,
Lijo. V. Jacob, Madras Institute of
Technology, Chennai
K.K.Arun, K.Senthil Kumar
K.M.Senthil Kumar, Kumaraguru College
of Technology,Coimbatore
S.Ramesh, Dr.N.Arunkumar, Dr.R.Vijayraj,
Sree Sastha College of
Engineering &Technology, Chennai
V.K.Manupati, R. Sridharan, N.Arudhra,
P.Bharadwaj, D.Trinath, M.V.B.T.Santhi,
KLUniversity, A.P
K. Arul Raj, R. Mariappan, A.S. Akilan
Einstein College of Engineering,
Tirunelveli
Shishir Mohan Shrivastava, A.K.Sarathe
MNITTTR, Bhopal
C.Prakash, Fatima Michael College of
Engg. And Tech. Madurai
LakshmananV, Gopal P, Sivakumar E, BIT
campus, Tiruchirappalli
Layout K.Kanthavel, Hemanth Sivan, Anna
University Regional Centre Coimbatore
Ravikumar Dumpala, B.V. Suresh,
Tribological and machining performance of
K. Ramasubramanian, V. Chittibabu,
the CVD diamond coatings against AlmM.S. Ramachandra Rao, GMR Institute of
30SiCp MMC
Technology, Andhra Pradesh
Effect of Nano-ZnO on the mechanical
Md Azad Alam, SajjadArif and Akhter
behaviour of Polystyrene Matrix
HusainAnsari, Aligarh Muslim University,
Composites.
Aligarh
Regression Modeling and Simulated
R. Rekha, N. Baskar, A.Palanisamy, J.Jerald
Annealing Approach for Multi-Objective
Optimization of Cylindrical Grinding Saranathan College of Engineering,
Truchirappalli
Process Parameters
Y.Kalyan Chakravarthy, J.Harish, D.Tarun,
The Kinematic analysis of a Robotic A.Srinath, Koneru Lakshmaiah Education
Prosthetic leg for estimation of torques
Foundation (K L University),
Vaddeswaram,
Towards energy savings of a hydraulic Jay Prakash Tripathi, Sanjoy K. Ghoshal,
lifting system: A bond graph simulation
K. Dasgupta, ISM, Dhanbad
Dry Sliding Tribological Characterization M.Kumar , Megalingam, V.Baskaran
and Parameters Optimization of Aluminium Bannari Amman Institute of Technology,
Hybrid Metal Matrix Composite for Erode
360
DM451
361
DM452
362
DM454
363
DM455
364
DM456
365
DM457
366
DM458
367
DM459
368
DM460
369
DM462
370
DM463
371
DM464
372
DM465
373
DM466
Automobile Brake Rotor Applications
Formability Analysis For Enhancing
Forming Parameters In Aa8011/Pp/Aa1100
Sandwich Materials
Characterization Of Microstructure And
Mechanical Properties Of Cu-Cr-Zr Alloy
& Its Electron Beam Welding (Ebw) With
Cu-Cr-Zr-Cu-Cr-Zr, Cu-Cr-Zr-Ni, Ni-Ss
For Thermo Nuclear Application
Finite Element Analysis of Multilayered
Elliptical Pressure Vessel under Internal
Pressure
Experimental Investigation of Cutting
Forces, Surface Roughness in the Turning
of B4Cp reinforced 6061 Aluminium Metal
Matrix Composites
Effect of Sintering Atmosphere and
Solution
Treatment
on
Density,
Microstructure and Tensile Properties of
Duplex Stainless Steels Developed from
Pre-Alloyed Powders
Surface
Reflectivity
Assessment
in
Electrophoretic
Deposition
Assisted
Polishing of AISI 304 Steel
Process Parameters Optimizationof Fsw Of
Aa6061on Low Rpm Fsw Setup Of Milling
Machine
K. Logesh, Dr.V.K.Bupesh Raja,
Sathyabama University, Chennai
Dr.V.K.Bupesh Raja, M.Baseer Ahamed,
K. Logesh
Sathyabama University, Chennai
N.J.Shirapthi Kaushik, M.Shakthi Nayagam
SASTRA University, Thanjavur
Vijaykumar Hiremath, Bharat Raj L, V.
Auradi and S. T. Dundur,
Siddaganga Institute of Technology,
Tumkur
R. Mariappan, M.Sudhahar, M.Sundeep,
S.B. Chandrasekhar, J. M.Babu
Vel-Tech Dr.R.R. and Dr.S.R Technical
University, Chennai
Karansagar Giradkar, Nikhil khatekar, Raju
Pawade, Dr. Babasaheb Ambedkar
Technological University, Lonere
Ashwani Kumar ,
R S Jadoun, Shri Ram Murti Smarak
Colleg of Engineering & Technoloy,
Bareilly.
Influence of position and size of
piezoelectric pair in active vibration control
B Selvam
of cantilever beam with tip mass
Sandeep Desai, Ajay Chavan, Raju Pawade,
Multi-attribute Optimization in CNC
P.K.Brahmankar, Dr. Babasaheb
Turning of PEEK Polymer using Grey
Ambedkar Technological University,
Relational Theory
Lonere
S. Balasubramanian, M. Gowshikan, K.
Laser Surface Modification Of High Carbon
Gowtham, SNS College of engineering,
Steel Components
Coimbatore, India
M. Sambathkumar, P. Navaneethakrishnan,
Mechanical Behavior of Al7075 (Hybrid)
K. Ponappa, Kongu Engineering College
Metal Matrix Composites by Two Step Stir
Erode
Casting Process
Multi Response Optimization Of Wedm
Process Using TGRA & PCA
Experimental Investigation on the impact of
the tool profile in the mechanical properties
of FSW AZ31B Mg alloy using optimized
process parameters
Use of Cutting Speed Parameter for Micro-
B. Satyanarayana, G. Srikar, VNR VJIET,
Hyderabad
Sevvel. P, Jaiganesh. V
Magna College of Engineering, Chennai
Ramesh Kuppuswamy, Akinori Yui
374
DM468
375
DM469
376
DM470
377
DM471
378
DM472
379
DM473
380
DM474
381
DM475
382
DM476
383
DM478
384
DM479
385
DM480
386
DM481
387
DM482
388
DM483
Machining of the NiTi Shape Memory University of Cape Town, Cape Town,
Alloys
South Africa
Jeevamalar, Dr. S. Ramabalan,
Influence of EDM Process Parameters on Dr. N. Sivashanmugam
Material Removal Rate
E.G.S. Pillay Engineering College,
Nagapattinam
Pervaz Ahmed M, Siddhi Jailani H, Rasool
Effect Of Cryogenic Treatment On Copper
Mohideen S, B S Abdur Rahman
Beryllium Alloy
University, Chennai
Pankaj Kumar, Manowar Hussain,
Modelling and Simulation of Cathode and
Purushottam kumar singh, Alok Kumar
Anode Erosion in Micro-EDM Process
Das, Indian School Of Mines, Dhanbad
To Investigate the Effect of Process
Parameters on Surface Roughness of Dr. M.V.R.D. Prasad, B. Sai Chandra,
Nimonic 80A in Dry Machining with CBN VNRVJIET, Hyderabad
Cutting Tool- by Ann Approach
Modelling And Optimization Of Solar A. R.Prakasha, B. B.Meenakshipriyab,
Energy Using Pic Microcontroller With C. B.Shivaprasathc, Velalar College of
Horizontal Axis Solar Tracker
Engineering &Technology, Thindal, Erode
Large Amplitude Free Vibrations Of
K.Krishna Bhaskar, University college of
Mindlin
Plates
Using
Coupled
engineering(A) JNTU Kakinada
Displacememt Field Method
Effect Of Poisson’s Ratio On Large
Amplitude Free Vibrations Of Timoshenko K.Meera Saheb, University college of
Beams Using Coupled Displacement Field engineering(A) JNTU Kakinada
Method
Microstructure and Tensile behaviour of P R. Sandeep, G L.Rajesh, V. Auradi &
9wt% ceramic B4C Particulate Reinforced S.A. Kori, Siddaganga institute of
6061 Aluminium Matrix Composites
technology, Tumkur
An Investigation on Weld Quality
N.V. Amudarasan, K. Palanikumar and
Characteristics and Optimization of Gas
K. Shanmugam, SRR Engineering College,
Tungsten Arc Welded Austenitic Stainless
Chennai
Steels
Processing and Evaluation of Wear Madeva Nagaral, Bharath V, V Auradi and
Behavior of Al6061-6%Al2O3-6%Graphite K I Parashivamurthy, Siddaganga Institute
Particulate Composites
of Technology, Tumkur
Structural Health Monitoring of Glass Fiber NishaM.S, Dalbir Singh, Sudarkodi,
Reinforced Composites using Embedded Hindustan University, Chennai
Piezoelectric Sensors
Development of Spray Deposited Yttria T.Sornakumar , N.SankaraSubramanian,
Stabilized Zirconia Thin Films for M.Nagaraj, Thiagarajar College of
Mechanical Applications
Engineering, Madurai
The Study Of The Adhesion Of A Tin Chandrashekhar A., V. R. Kabadi,
Nitride Coatings On Steel Substrates Using Sunilkumar Ogenavar, Hirasugar Institute
A Scratch Tester
of Techology, Nidasoshi
Effect of Longitudinal and Transverse
Vibration on Material Removal Rate and Devaki Nandan, J Ramkumar
Dross Formation Rate in Plasma Arc Indian Institute of Technology Kanpur
Cutting Process
A Complete Analytical Solution For Sumit Kumar Jindal,Sanjeev Kumar
Different Conditions of Circular Diaphragm
Pressure Sensor with Central Concentrated
Load
Life Estimation Of Cardiovascular Stents
Using Numerical Approach – Effect Of
Ageing
389
DM484
390
DM485
Concept
Of
Group
Technology
Accomplishment In The Field Of Cellular
Manufacturing Systems
391
DM486
Effect of Process Parameters on the
Codeposited Ni-SiC Particle Reinforced
Metal Matrix Composite (MMC) Coatings
by Electroplating.
392
DM487
393
DM489
394
DM490
395
DM491
396
DM493
397
DM495
Optimum Curing Condition for Cogged Belt
with Better Capability of Breaking Strength
398
DM496
Solar Power Generation Using Parabolic
Concentrator
399
DM497
Solar Water Distillation Using Three
Different Phase Change Materials
400
DM498
Optimisation of process parameters for laser
welding on Incoloy 800HT using TOPSIS
401
DM499
402
DM500
Price Dependent & Time Demand Two
echelon Inventory Model with Supply
Rationing in the Supply Chain
Extended Abstract
Effects of aging on hardness and wear
properties of
Cu-9Ni-6Sn cast alloy
Improving Mechanical Properties Of
Prosopis Juliflora Composite Treated With
Sodium Hydroxide For Automotive
Applications
Scrutiny of Machine Assignment in Various
Intra-Cell Layout in Cellular Manufacturing
using Automation Studios
Taguchi optimization and effect of Process
Parameters on AA5083 Alloy Friction Stir
Welds
Design and Development of Pneumatic
Excavator for Biogas Sludge.
Analysis of the Gear Actuation Circuit of
Automatic Transmission in an Armoured
Raghuwanshi, Indian School of Mines,
Dhanbad
Sagar Dolas, Gurunathan C
Gnanamoorthy. R, Indian Institute of
Information technology, Kancheepuram
K.Arun Prasath, S.Anbarasan,
S.Suriya Pradheep , A.Sivamani,
R.Vigneshwaran, M.Kumarasamy College
of Engineering Karur
Pradeep Devaneyan.S, T.Senthilvelan
Pondicherry Engineering College,
Puducherry
Dr. T.V.S. Raghavendra , G.Nagarjuna
K.L. University, Vijayawada.
S. Ilangovan
Amrita School of Engineering, Coimbatore
LakshmananV, Gopal P, Sivakumar E,
BIT campus, Tiruchirappalli
Prof C.Ramesh, K.Arun Prasath, N.Raghul
Raj, M.Kumarasamy College of
Engineering Karur
M. Srinivasa Rao , V.V. S. Bhaskara Raju ,
T. Subrahmanyam,N. Ramanaiah
Andhra University, Visakhapatnam
P.S.Samuel Ratna Kumar, Sridhar Selvaraj,
S.Prabhu, A.Bala Kumaran, Kumaraguru
College of Technology, Coimbatore
Naga Sarada Somanchi, K. Sai Phanindra
Dinesh, P.Mohan Sai Kiran and Ravi
Gugulothu, JNTUH College of
Engineering, Kukatpally, Hyderabad
Ravi Gugulothu, Naga Sarada Somanchi,
Sri Rama Devi R, Kishan Banothu
JNTUH College of Engineering,
Kukatpally, Hyderabad
Srirangan, Arun Kumar, Paulraj, Sathiya
National Institute of Technology,
Tiruchirappalli
Sushant A. Dhumale, Maruti M. Khot
Walchand College of engineering, Sangli
Arun Raj S. Thirumalini, S. Mathi
Amrita Vishwa Vidyapeetham, Coimbatore
403
DM501
404
DM502
405
DM503
406
DM504
407
DM505
408
DM506
409
DM507
410
DM508
411
DM509
412
DM510
413
DM511
414
DM513
415
DM514
416
DM516
417
DM517
418
DM518
Fighting Vehicle
Enhanced Framework of Reliability analysis Vaishnavi.P, Selvamani.P, Deenadayalan.V
for Critical Network Infrastructure
Anna University, BIT campus, Trichy
S. Rani Muthu, Dr.A. Valarmathi,
Enhancing RBA for Preventing RFID ReC. P. Indumathi, ANNA UNIVERSITY
Entering Tags in Manufacturing Industry
(BIT Campus), Tiruchirappalli
Prof. Rupesh G. Telrandhe, Prof.Tushar S.
CFD Analysis of Natural Convection Flow
Karhale, Datta Meghe Institute of
through Inclined Pipe
Engineering, Wardha,
Optimization Of Machining Parameters For
R.Viswanathan, Kongunadu College of
Turning Of Magnesium Alloy Using
Engineering & Technology, Trichy
Response Surface Methodology
Comparative study of Performance,
Emission & Wear analysis of biofuel bio K.S.Srikanth, Jayaprakash Reddy V,
lubricant (Rapeseed & Pongamia) in a SCSVMV University, Kanchipuram
Diesel Engine.
Investigation of thermal barrier coating in 4- I.Akilan, P. A. College of engineering and
stroke diesel engine piston crown
technology, Coimbatore
Resolving Geometric Bottlenecks through Ashwani Upadhyay, Gautam Kumar Arya,
Domain Mapping
Hari K. Voruganti, NIT Warangal
Measurement and Evaluation of qualitative
and quantitative dimensions using Analytic S.Anivel, Dr. K. Manivannan,
Network Process (ANP) approach on the Dr. P.Parthiban, VIT University, Vellore
performance of cement production industry
Performance
measurement
of
S.Anivel,Dr. K. Manivannan,
manufacturing industries using Fuzzy topsis
Dr. P.Parthiban, VIT University, Vellore
and fuzzy vikor methods
Performance
Measurement
Of
S.Anivel, Dr. K. Manivannan
Manufacturing Industries Using Analytical
Dr. P.Parthiban, VIT University, Vellore
Hierarchical Process Methods
S.Vigneshwaran, K. Saravanan , Vinoth,
Effect of Chip Thickness on Consolidation
P.Venkatachalam, S. Kumaran and
of Commercial Pure Aluminium Chips by
B. Ravisankar, Roever College of
Equal Channel Angular Pressing (ECAP)
Engineering & Technology, Perambalur
Estimation of distinctive mechanical M. Selva Kumar, P. Chandrasekar,
properties of spark plasma sintered Ti-TiB M. Mohanraj, B.Ravisankar
composites through nano indentation Dr. Mahalingam College of Engineering
technique
and Technology, Pollachi
Prediction of orthogonal machining induced B. Rajeswari, Dr. K.S. Amirthagadeswaran,
residual stress in Al-7075-SiC-Al2O3 metal Binay Kumar Sah, Government College of
matrix composite
Technology, Coimbatore
Multi Objective Optimization of Machining
B.Rajeswari , K.S.Amirthagadeswaran ,
Performance in Aluminium Hybrid Metal
R.Jayashree, Government College of
Matrix Composite Using Response Surface
Technology, Coimbatore
Methodology
Inventory Management Using Abc Analysis Dr.S.P.Dhandayuthapani, Dr.C.Thirumal
Azhagan, M.Vignesh, Anna University,
- A Case Study On Manufacturing Industry
Tiruchirappalli
Characterization Of Ceria-Coated Sillica C. Ramesh Kumar, Dr.M. Omkumar,
Particles And Their Chemical Mechanical B. Venkatraman, College of Engineering
419
DM519
420
DM520
Polishing Performance On Soda Glass Guindy, Chennai
Substrate
An Investigation On The Effect Of Ni
Nidhin Raj A, R. Sellamuthu
Addition On The Hardness Of Al-Si-Mg
Amrita Vishwa Vidyapeetham, Coimbatore
Alloy
R.Srikanthan, M.Karthik, N.Sivakarthik,
Cloud Based Supply Chain Management for
P.Indukumar and S.P.Anbuudayasankar
SMEs
Amrita Vishwa Vidyapeetham, Coimbatore