Institute Managing Committee Society of Industrial
Training Institute, Sadhaura District Yamuna Nagar
TENDER DOCUMENT
For Supply of Tool, Machinery & Equipment
Under the (PPP) Scheme for the Trades are Fitter, Turner Wire Man & Motor Mechanic
Vehicle & Ref. & Air Condition, Welder.
Under the (SCSP) Scheme Trades are Fitter, Turner, Wire Man, Dress Making & Machinist.
Price of Tender Form : Rs. 1000/Earnest Money : Rs. 1 Lacs/- (DD name of Principal cum Member Secretary of IMC Society ITI Sadhaura (YNR)
payable at Sadhaura) for PPP Scheme.
Rs. 1 Lacs/- (DD name of Principal Govt. ITI Sadhaura (YNR) payable at Sadhaura) for SCSP
Scheme.
Place & Time of Sale of Tender Document: Govt. Industrial Training Institute Sadhaura(YNR) .
Last Date and Time for receipt of Tender
08.07.2015 (03:00PM)
Date, Time & Place of Opening:
10.07.2015(11:00PM)
In Govt. ITI Sadhaura Distt Yamuna Nagar
Issued to :
M/s ……………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………..
Issued By:Principal cum Member Secretary
IMC Society of ITI Sadhaura
District Yamuna Nagar
01735-270774
1 of 41 | P a g e
INDEX
Sr. No.
Name of Contents
Page No.
SECTION-1
1
Notice Inviting Tender
2
Press Notice
3
Detail Notice Inviting Tender
SECTION-2
1
Instruction to Bidders
SECTION-3
1
Eligibility Criteria
2
Schedule of Material for Price Bid
2 of 41 | P a g e
SECTION- 1(i)
IMC SOCIETY OF I.T.I SADHAURA, HARYANA
NOTICE INVITING TENDER
Sr.
No.
Name of Work Estimate
Cost(Rs.)
Earnest Money
1
Supply of Tool, Machinery
& Equipment Schedule of
Items in section 3(ii) from
Items S. no. 01 to
Approx Rs. 20
Lacs. (PPP
Scheme)
Approx Rs. 10
Lacs (SCSP
Scheme)
100000/-
Full details visit web site http://www.govtitisadhaura.com
For and on behalf of IMC Society of ITI Sadhaura (YNR)
Principal cum Member Secretary
IMC Society of ITI Sadhaura (YNR)
3 of 41 | P a g e
100000/-
Last Date and
time of receipt
of tender
08.07.2015
3:00PM)
vkbZ- ,e- lh- lkslk;Vh vkQ baMLVªh;y Vªsfuax
bLaVhV~~;wV lk<+kSjkA
fnuakd%& 25@06@15
ua0%& 01735&270774
Qksu
fufonk lwpuk
iz/kkukpk;Z de lnL; lfpo vkbZ,elh lkslk;Vh vkQ vkbZ Vh vkbZ
lk<+kSjk ds dk;kZy; esa lnL; lfpo vkbZ,elh lkslk;Vh vkQ
vkbZ Vh vkbZ lk<+kSjk ds i{k esa Mh Mh }kjk vFkok udn :i;s
1000@& izR;sd dk Hkqxrku djus ij miyC/k fu/kkZfjr fufonk
QkeZ ij izfrf”Br fuekZrkvksa ,ao vf/kd``r vkiwfrZdrkZvksa
ls vkbZ Vh vkbZ lk<+kSjk esa fofHkUu O;olk; ds enksa dh
Vwy] e’khujh ,ao bDohiesaV dh [kjhn ds fy, eksgjcan
fufonk,a fnuakd 08@07@2015
izkr% 03%00 cts rd vkeaf=r dh
tkrh
gSaA
fufonk
QkeZ
laLFkku
dh
oSclkbZV
www.govtitisadhaura.com ls MkmuyksM djus dh fLFkfr esa 1000@&
:i;s ds fufonk QkeZ ewY; Mh Mh ds fcuk Lohdk;Z ugha gksxkA
enksa dh foLr`r lwph] fooj.k o ‘krsZa Tender Document esa
miYc/k gS Upgradation of 1396 Govt. ITI’s through PPP Scheme vkSj State
Plan Scsp Scheme ds fy, fufonkvksa dh vyx vyx fcdzh dh tk,xh
vkSj ,d gh lhy can fyQkQksa esa Lohdk;Z gksaxsA
fufonk QkeZ fcdzh dk LFkku o le; %& jktdh; vkS|ksfxd
izf’k{k.k laLFkku] lk<+kSjk esa 26@06@2015 izkr% 10%00 cts
ls 06@07@2015 lka; 4%00 cts rd A
/kjksgj jkf’k %& For Upgradation of 1396 Govt. ITI’s through PPP
Scheme 100000 :i;s ( DD in favour of Principal cum member secretary IMC
Society of ITI, Sadhoura Payable at Sadhaura)
/kjksgj jkf’k% For State Plan Scheme 100000 :i;s (DD in favour of
Principal Govt. ITI, Sadhaura Payable at Sadhaura.
fufonk [kksyus dk LFkku%& dk;kZy; iz/kukpk;Z] jktdh; vkbZ
Vh vkbZ] lk<+kSjk
4 of 41 | P a g e
fufonk [kqyus dh frfFk o le;%& fnuakd 10@07@2015 lka; 11%00
ctsA
rkj izsf”kr Lk’krZ] /kjksgj jkf’k jfgr fufonka, Lohdkj ugha
dh tk,axhA vkbZ ,e lh lkslk;Vh vkQ vkbZ Vh vkbZ lk<+kSjk
fcuk dkj.k crk,a fdlh Hkh fufonk @ lHkh fufonkvksa dks
vLohdkj djus dk vf/kdkj lqjf{kr j[krh gSA
iz/kkukpk;Z
de
lnL;
lfpo
vkbZ-
,e-lh-lkslk;Vh
vkQ vkbZ Vh vkbZ lk<+kSjk
SECTION-1 (iii)
DEATIL NOTICE INVITING TENDER
Sealed tender on the prescribed form are hereby invited form the suppliers/manufactures having registered sale
tax number (TIN No.) for Tool Machinery & Equipment mentioned below in the double envelope system
containing the price conditions and rates separately up to 3:00 P.M. on dated 08.07.2015 in the office of the
Member Secretary of IMC Society of Govt. ITI Sadhaura, Kala Amb Road Sadhaura. The tenders shall be opened
on 10.07.2015 at 11.00 am in this office in the presence of venders or their authorized representative/agents
who may like to be present at the time.
Sr.
Name of Work
Cost (Rs. In Earnest
Time Limit
Last date of Last date & Dated &
No.
Estimated
Lacs)
Money
sale tender time of
Time of
document
receipt of
opening of
tender
tender
1
2
3
4
5
6
7
8
1
Supply of Tool,
Approx Rs. 100000/One Month 06.07.2015 08.07.2015 10.07.2015
Machinery &
20 Lacs
(3:00PM)
(11:00AM)
Equipment
(PPP
Schedule of Items Scheme)
in Section 3(ii)
Approx Rs. 100000/from page No. 10 10 Lacs
to 28
(SCSP
Scheme)
5 of 41 | P a g e
Tender documents can be obtained on making payment of Rs. 1000/- Non-refundable from the Office of the
Member Secretary of IMC Society of Govt. ITI Sadhaura during the office hours from 26.06.2015 (9:00 AM) to
06.07.2015. (3:00PM)
In addition to his the tender documents are also available as downloaded (s) on www.itisadhaura.com Intending
firms can download documents from the internet & can submit the document duly filled along with the requisite
tender documents fees in the form of demand draft drown on any scheduled bank in favor of Member Secretary
of IMC Society of Govt. ITI Sadhaura (YNR)
. Download document submitted without requisite document fees will summarily rejected.
The agencies will submit the necessary document as under :Envelope ‘A’
Tender document fee (Rs. 1000/- In case of downloaded documents) in the shape of demand draft, Earnest
Money Rs. 100000/- in shape of Demand draft .
Envelope ‘B’- Technical Bid Envelope
Envelope ‘B’ shall consist of two sub-Envelopes as under
1st envelope (Eligibility Conditions)
2nd envelope (Price Bids)
Both these envelope ‘A’ and ‘B’ shall be placed in another Envelope of bigger size clearly marking the name of
agency and name of work with Contact Numbers.
Envelope ‘B’ will be only opened if the agency full fill conditions Envelope ‘A’ Envelope B(2nd ) will be opened if
the agency full fills the eligibility conditions in Envelope B (1st ).
TERMS & CONDITIONS:1. Conditional tenders will not be entertained & are liable to be rejected.
2. In case the day of Opening of tender happens to be holiday, the tenders will be opened on the next
working day. The time and place of receipt of tenders and other conditions will remain unchanged.
3. The undersigned reserve the right to reject any tender or all the tenders without assigning any reason
thereon.
4. The suppliers/manufactures shall produce an attested copy of the TIN Number, PAN Number.
5. The tender without earnest money will not be opened.
6. The jurisdiction of court will be at Yamuna Nagar
7. The tender of the bidder who dose not satisfies the qualification criteria in the bid documents are liable
to be rejected. Summarily without arising any reason and no claim whatsoever on this account will be
considered .
8. The bid for the procurement of Tool, Machinery & Equipment shall remain open for acceptance during
the bid validity period to be reckoned from the date of receipt of tenders. If any bidder/ tender
withdraws his bid/tender before the said period of makes any modifications in the terms and conditions
of the bid, the said earnest money shall stand forfeited. Bids would require to be valid for 3 months
from the date of bid closing.
9. A bidder shall not be permitted to bid for supply in the office of Govt. ITI Sadhaura (YNR) responsible for
award and execution of supply in which his spouse’s near relative (defined as first blood relations, and
their spouses) is posted as Employee or as an officer in any capacity in Govt. ITI Sadhaura.
10. There should not be any alteration in the bidding documents. In case any alteration in found at any
stage, the tender shall be liable for rejection summarily without further appeal.
6 of 41 | P a g e
11. The interest agencies can submit the tenders in person of through registered post (AD) or speed post
ensuring that the same reaches the appropriate for postal delays, if any. Reaching the tender to the
appropriate authority is bidder’s responsibility.
12. All pages of the tender should be signed by the bidder and put his firms stamps on every page of tender.
Rates should be written in figures as well as words. If there is discrepancy in the figures and the words,
the rates given in the words shall govern unless it is clearly repugnant in the context.
13. Defaulting agencies in respect of performance of the context after its award shall Tender them liable to
be debarred from further tendering for a period of two years besides the contractual remedies provided
in the context.
14. Bidder must strictly abide by all the stipulations set forth while bidding for the supply. In case any bidder
dose not comply with the procedure prescribed, it may be presumed that he is not interested in bidding
and order may not be let out to him.
15. The bidders turnover should be 1 cor. During the last one years.
16. The Case of insufficient or improper specification of the item the rate for the particular item will not be
considered in the comparative statement.
17. In case of Non-supply of goods deduction of the penalty @10% of the value of the goods or 2nd lowest
bidder difference which ever will be in higher side will be deducted.
18. All logistic changes will be included in the price quoted. No extra changes will be applicable.
19. Member Secretary has reserved the right to accept or reject the tender application or cancel the tender
process without assigning any reason thereon.
20. The Supply order may be placed to L-1 as per provision of budget.
21. If any supplier do not quote the rate in quotation of any item so that it will be treated that the supplier
will supply the same item free of cost.
22. If the L1 is failure to supply the items so that the supply order may be placed to L2
23. Performance guarantee will be of two years & performance guarantee 5% of supply order in safe of DD.
24. The firm give the certificate at the last page Quotation letter that our price are reasonable in all
Haryana.
For and on behalf of IMC Society
Principal Cum Member Secretary
IMC Society of ITI Sadhaura (YNR)
Phone :- 01735-270774)
Endorsement No. …………
Dated ………..
A Copy of above is forwarded to the following for information and wide publicity: 1 Director
General Industrial Training Department Haryana-Chandigarh.
7 of 41 | P a g e
Principal cum Member Secretary
IMC Society of ITI Sadhaura (YNR)
DOUBLE ENVELOPE SYSTEM
While tendering for the work, the tender shall adopt envelope system as per detail below:
Envelope ‘A’
Tender document fe (Rs. 1000/- In case of Down Loaded documents) in the shape of Demand
draft (Non Refundable), Earnest Money Rs. 100000/- in shape Demand draft.
Envelope ‘B’- Technical Bid Envelope
Envelop ‘B’ Shall consist of two sub-Envelope as under
1st envelope (Eligibility Conditions)
2nd envelope (Rates)
Both these envelopes ‘A’ and ‘B’ shall be placed in another Envelope of Bigger Size clearly
marking the name of agency and name of work.
Envelope ‘B(1st ) will be only opened if the agency full fill conditions in Envelope ‘A’ Envelope
‘B(2nd ) will be opened if the agency full fills the eligibility conditions in Envelope B (1st ).
Any departure from the above would marks the tender invalid and it would not be opened and
if it is erroneously opened, will not be considered at all. Further the tendered who is
responsible for the deviation shall be liable to be delisted without any further notice to him in
respect of the proposed action for the default.
In case, any tended dose not comply with the procedure given above and fails to give financial
implications and pricing of his conditions of the with-drawl of conditions which are at variance
8 of 41 | P a g e
with the stipulations of material list it will be presumed that he is not interested in supplying
the material and his second envelope i.e. price bid shall be returned to him unopened and will
not be considered while opening the Envelope B Second envelope of the other tenders .
SECTION-2 (i)
INSTRUCTIONS TO BIDDERS
General
Brief particulars are listed below; however tender documents may be referred to for correct
appreciation of scope of work, conditions of contract, specifications.
Sr.
No.
Name of Work
Procurement of Tool, Machinery & Equipment
1
2
3
Scope of Work
Validity period
Estimated cost of the
Tender
Supply of Tool, Machinery & Equipment
Three Months from deadline of Tender
Approx. 20 Lac. (PPP)
Approx. 10 Lac. (SCSP)
4
Cost of tender
documents (NonRefundable)
Rs. 1000/-
5
Earnest Money
To be accompanied with the tender Rs. 100000/- (in
shape of D.D. in favor of Principal cum Member Secretary
IMC Society of ITI Sadhaura (YNR) payable at Sadhaura)
9 of 41 | P a g e
(PPP Scheme)
To be accompanied with the tender Rs. 100000/- (in
shape of D.D. in Favor of Principal Govt. ITI Sadhaura
(YNR) payable at Sadhaura) (SCSP Scheme)
5% of the supply order values whichever is higher subject
to the supply order issued to the agency up to 60 days.
Security Deposit
6
Performance Guaranty
Two Years
Section-3-(i)
ELIGIBIITY CRITERIA FOR THE BIDDER
TO BE SUBMITTED BY THE BIDDER
Sr. No.
1
2
3
4
The Bidder
State Yes or No
Should have experience in working with
Govt./Pvt. Educational
Institutes/Organization/Egg.
Colleges/Polytechnics/ITIs at least two
year for providing such material.
(Supporting documents required )
Should have TIN Number issued by the
Competent authority. (Supporting
document required )
Should have PAN Number in the name of
the firm.(Supporting documents required)
Should have ever been blacklisted for any
default in supply by any Govt. agency.
(Affidavit to be attached)
10 of 41 | P a g e
Particulars
5
Should have turnover at least Rs. 1 cor.
For the last one years. (Supporting
document required)
Signature of Tender
DECLARATION:- Certified that:
1. I have read all the terms and conditions mentioned in the Tender Document & agree to abide
by all the conditions.
2. The information given above is true & correct to the best of my knowledge & nothing is
concealed therein.
Signature of Tender
NOTE:- To be submitted in Envelope B-1st with all supporting documents and Affidavit.
Section-3(ii) (Schedule of Items)
List of Tools, Mach. & Equip. Items for Govt ITI Sadhaura (YNR)
Description
S.NO.
Caliper odd leg firm joint 150 mm
1
2 Scriber 150mm x 3mm
Hammer ball pein 250 gm with handle
3
4 Prick punch 100mm
Safety goggles clear glass(Good quality)
5
6 Surface plate 60 x 60 cm
Work bench 240 x 120 x 90 cm high iron frame
7 2.5" sq.
Marking table (CI) 120 x 120 cm
8
11 of 41 | P a g e
Qty
(PPP
Scheme)
Make
Qty (SCSP
Scheme)
Make
31
ISI
40
ISI
57
ISI
36
ISI
28
TAPARIA
49
TAPARIA
8
TAPARIA
18
14
ISI
52
ISI
1
MITUTOYA
2
MITUTOYA
2
ISI
12
ISI
2
ISI
2
ISI
Vee block 75 and 125 cm with clamp
9
Hammer ball pein 800 gm handle
10
11 Chisel cold flat 20 x 150 mm
Hammer copper brass 500 gm with handle
12
File half round 150 mm smooth
13
Knurling tool revolving head(rough,med. Fine)
diamond and straight
3 EACH
ISI
2
TAPARIA
8
TAPARIA
14
TAPARIA
2
TAPARIA
14
TAPARIA
12
TAPARIA
12
TAPARIA
12
JK
4 set (26
nos)
JK
1
AMBIKA
3 EACH
AMBIKA
2 SET
TAPARIA
2
4
TAPARIA
1 SET
AMBIKA
1
AMBIKA
2
AMBIKA
14
Screw driver 200 & 300 blade heavy duty
15
Spanner double ended 6 mm to 21mm
16
17 Spanner adjustable 200mm
Pliers flat nose 150 mm side cutting
18
Caliper transfer inside 150mm
19
Radius gauge 1 to 7mm & 7.5mm to 15mm
20
Screw pitch gauge metric and whitworth
21
22 Drill angle gauge
Vernier hight gauge with dial 300mm LC
0.01mm
23
24 Magnifying glass 75mm dia
Plain ring and plug gauge 12 to 50mm by 1mm
25
Wheel dresser huntingon-type with star cutter
26
Wheel dresser diamond (inserted 0.75 or 1
27 carat)
Morse taper plug and ring gauge no 0 to 7MT
28
Slip gauge metric set (87 pieces in a box)
29
Morse taper sleeve no 0-1,1-2,2-3,3-4,4-5
30
12 of 41 | P a g e
29
TAPARIA
32
AMBIKA
3
AMBIKA
6
AMBIKA
6
ISI
7
ISI
2
ISI
7
ISI
2 SET
ISI
4
ISI
0
ISI
1
2 WITH
OUT DIAL
MITUTOYA
2
ISI
6
ISI
1 SET
ISI
2
ISI
1
ISI
6
ISI
2
ISI
5
ISI
1SET
ISI
2 SET
ISI
4
MITUTOYA
8
MITUTOYA
0
ISI
4
ISI
31 Drill drift
32 Drill chuck key 12mm cap
Tap and die BA no 0 to 10 in a box
33
Tap and die metric set upto 25mm
34
35 Tap and die BSF upto 1 inch
Tap and die BSW upto 1 inch
36
Reamer machine straight flat 6 to 25mm
37
Reamer adjustable 10 to 20mm
38
Tool holder RH and straight for mm square tool
39 bit
Parting tool holder with HSS blade
40
Boring tool holder for 6mm sq tool bit
41
42 Dog carrier 25,50 and 75mm
Angle plate with slots 200mm
43
44 Tool maker button
Combination drill A-2.5 and A-1
45
Oil stone 12mm sq x 100 long size
46
Tool bit assorted size on holder
47
Machine vice 100mm jaw(for drill machine)
48
Spare grinding wheel ajax type for carbide tool
49
50 Almirah 1980 x 910 x 480mm
51 Stool
Angle gauge for tool grinding
52
Hand chaer M-12 & M-16(external)
53
Hand chaer M-12 & M-16(internal)
54
13 of 41 | P a g e
1 set
1 set
ISI
ISI
2
2
ISI
ISI
2 set
ISI
5
ISI
2 set
ISI
2
ISI
2 set
ISI
2
ISI
2 set
ISI
3
ISI
1 set
ISI
2
ADISSION
2 set
ISI
2
ADISSION
0
ISI
10
ISI
6
ISI
12
ISI
ISI
30
ISI
ISI
24
ISI
4
ISI
16
ISI
1 set
ISI
2
ISI
5 each
addition
1
ADISSION
14
ISI
12
ISI
0
ISI
4
ISI
5
ISI
8
ISI
2
ISI
2
ISI
0
0
ISI
ISI
2
10
ISI
ISI
2
ISI
12
ISI
2
ISI
2
ISI
2
ISI
2
ISI
9 holder
15 bit
1 set
Revolving centre (to suit lathe tailstock)
55
Thread plug gauge M-20 & M-21
56
Thread ring gauge M-20 & M-21
57
Machine chase M-12 to m-21 (std. series)
58
59 Conventry die head
60 Gauge drill grinding
Magnetic chuck 150mm dia(Circular type)
61
62 Lathe mandrels (diff. types)
Conventry type die head (self opening)
63
Collapsible tap with attachment
64
Combination drill A-2.5 and A-1
65
66 Fire buckets
Bore dial gauge stems-12 to 35 mm,35 m to
65mm dial gauge indicator of 0.01 accuracy
6
ISI
6
ISI
1
ISI
1
ISI
1
ISI
2
ISI
2
ISI
2
ISI
3
0
ISI
ISI
4
1
ISI
ISI
2 set
ISI
2
ISI
2 set
ISI
2
ISI
2
ISI
2
ISI
4
ISI
4
ISI
7 each
addition
8 each
ISI
4
ISI
4
4
MITUTOYA
4 each
ISI
2
MITUTOYA
2
MITUTOYA
1
MITUTOYA
1
MITUTOYA
21
ISI
0
ISI
67
Digimatic electronic vernier caliper 8"/200mm
0.001mm / LCM0.005 ''
68
Digiamtic electronic outside micrometer 0 to
25,25 to 50 )mm LC 0.001mm
69
Draughtsman drawing instrument box
containing compasses with pencil point,point
driver,interchangeable,divider spring bow,
Divider pen point interchangeable ,pen spring
bow lengthening bar,pen drawing liner,screw
driver instrument,tube with lead
70
14 of 41 | P a g e
Set square celluloid 45°(250 x 1.5mm)
71
Set square celluloid 30°-60°(250 x 1.5mm)
72
French curves(set of 12 celluloid)
73
74 Mini drafter
Chest of drawer 8 drawers(standard)
75
Steel Rule 15 cm with metric graduation
76
77 Try Square 10 cm blade.
Caliper outside 15 cm spring
78
79 Divider 15 cm spring
80 Centre Punch 10 cm
81 Screw driver 15 cm
82 Chisel cold flat 10 cm
Hammer ball peen 0.45 kg. With handle
83
84 File flat 25 cm. second cut
85 File flat 25 cm. smooth
File half round second cut 15 cm.
86
87
88
89
90
91
Hacksaw frame fixed 30 cm.
Dot slot punch 10 cm.
Steel Rule 30 cm
Steel Rule 60 cm.
Straight edge 45 cm steel
Surface plate 45 x 45 cm CI / Granite.
92
Marking table 91 x 91 x 122 cm.
93
Universal scribing block 22 cm.
94
V-Block pair 7 cm and 15 cm with clamps
95
Square adjustable 15 cm blade.
96
97 Spirit Level 15 cm metal
Punch round 3mm x 4 mm set of 2
98
15 of 41 | P a g e
21
ISI
0
21
ISI
0
4
ISI
0
21
ISI
0
2
ISI
0
4
kristal
17
ISI
0
8
ISI
11
5
ISI
8
8
8
26
TAPARIA
AMBIKA
TAPARIA
17
12
42
17
ISI
ISI
ISI
ISI
8
TAPARIA
45
ISI
1
6
JK
JK
14
7
JK
JK
8
JK
42
JK
8
20
19
0
0
ISI
ISI
ISI
ISI
ISI
8
17
39
12
2
ISI
ISI
ISI
ISI
ISI
0
ISI
4
ISI
2
ISI
2
ISI
0
ISI
2
ISI
0
ISI
4
ISI
0
ISI
4
ISI
0
ISI
2
ISI
0
ISI
4
ISI
Portable hand drill (Electric) 0 to 6 mm
99
Drill twist straight shank 8 mm to 15 mm by 0.5
100 mm
Taps and dies complete set in box 3-18 mm set
101 of 10
102 File warding 15 cm smooth
File knife edge 15 cm smooth
103
104 File cut saw 15 cm smooth
File feather edge 15 cm smooth
105
File triangular 15 cm smooth
106
File square 15 cm second cut
107
File square 25 cm second cut
108
109 Feeler gauge 10 blades
File triangular 20 cm second cut.
110
111 File flat 30 cm second cut.
112 File flat 20 cm bastard
113 File flat 30 cm bastard.
File Swiss type needle set of 12.
114
File half round 25 cm second cut.
115
116 File hand 15 cm second cut.
117 Card file.
Oil Stone 15 cm x 5 cm x 2.5 cm
118
119 Pliers combination 15 cm
120 Soldering Iron 350 gm.
121 Blow Lamp 0.50 liters.
Spanner D.E. 6 -26 mm set of 10 pcs.
122
123 Spanner adjustable 15 cm
16 of 41 | P a g e
0
ISI
2
ISI
1
ISI
2 set
ISI
0
ISI
1
ISI
0
ISI
8
ISI
0
ISI
8
ISI
0
ISI
4
ISI
4
JK
4
JK
0
10
JK
0
8
ISI
0
16
JK
0
3 set
ISI
0
20
ISI
0
8
28
JK
JK
16
8
16
ISI
ISI
ISI
1
JK
1 set
ISI
0
12
ISI
0
0
16
14
ISI
ISI
0
12
ISI
0
0
0
4
4
4
TAPARIA
ISI
ISI
7 nos
ISI
4
ISI
13
0
AMBIKA
Interchangeable ratchet socket set with a 12
mm driver,
sized10-32 mm set of 18 socket & attachments.
0
2 set
ISI
2 set
AMBIKA
0
4
ISI
0
6
ISI
0
2 set
ADISSION
0
2 set
ISI
0
2 nos.
ISI
0
16 each
ISI
0
16
ISI
0
3
ISI
0
1
ISI
1
ISI
2
ISI
2
ISI
0
0
0
2
16 nos
4 nos
ISI
ISI
ISI
0
2
ISI
0
8
TAPARIA
4 each
4 each
ISI
124
Box spanner set 6-25 mm set of 8 with Tommy
125 bar.
Clamp toolmaker 5 cm and 7.5 cm set of 2.
126
127 Clamp “C” 10 cm
Hand Reamer adjustable cover max 9
,12,18mm – set of 3
1 SET
AMBIKA
128
Hand Reamer taper 4 -9mm set of 6 OR 4 -7
129 mm set of 4.
Reamer parallel 12 - 16mm set of 5.
130
Chisel cold 9 mm cross cut 9 mm diamond.
131
Chisel cold 9 mm round noze.
132
133 Stud Extractor EZY – out
Wire gauge, metric standard.
134
Drill twist Taper Shank 12 mm to 25 mm x 1.5.
135
136 Pipe vice 100mm
Adjustable pipe tap set BSP with die set cover
pipe size 15,
20,
25,32,38,50 mm.
137
138 Machine vice 15 cm
139 Vice bench 12 cm jaws.
140 Vice leg 10 cm jaw.
Wing compass 25.4 cm or 30 cm.
141
Hand hammer 1 kg. with handle.
142
Carbide Wear Block 1 mm – 2 mm.
143
17 of 41 | P a g e
1
addition
0
1
AMBIKA
Gauge snap Go and Not Go 25 to 50 mm by
5mm. Set of 6
pcs.
0
2 set
ISI
0
2 set
ISI
0
2
ISI
0
0
2
2
ISI
ISI
0
2 SET
ISI
0
4
ISI
0
4
ISI
0
4
ISI
0
2
ISI
0
4
ISI
0
1
ISI
Pipe bender spool type up to 25 mm. with
stand manually
operated.
0
2
ISI
Adjustable pipe chain tonge to take pipes up to
300 mm.
0
2
ISI
0
2
ISI
0
2
ISI
0
1
ISI
144
Gauge plug single 3 ended 5 to 55 by 5 mm. Set
145 of 11 pcs.
Gauge telescopic upto 150 mm.
146
147 Sine bar 125 mm.
148 Sine bar 250 mm.
Lathe tools H.S.S. tipped set.
149
Lathe tools bit 6 mm x 75 mm.
150
Lathe tools bit 8 mm x 75 mm.
151
Lathe tools bit 10 mm x 85mm.
152
Arm strong type tool bit holder straight.
153
154 Stilson wrenches 25 cm
Pipe cutter 6 mm to 50 mm wheel type.
155
156
157
Adjustable spanner 38 cm long.
158
Dial vernier caliper 0 – 200 mm LCO 0.05 mm.
(Universaltype).
159
Screw thread micrometer with interchangeable
0-25mm.
Pitch anvils for checking metric threads 60.
160
18 of 41 | P a g e
Depth micrometer 0-25 mm. 0.01 mm.
0
1
ISI
0
1
ISI
0
1
ISI
Surface roughness comparison plates N1-N12
grade
0
2 SET
ISI
SS and SC centre lathe (all geared) with
Minimum centre
height 6”/150 mm & length 4.5‟/ 1400 mm
along with 3, 4 jaw chuck, auto feed system,
coolant arrangement, lightening lamp, taper
turning attachment, safety guard & standard
accesories.
0
1
0
2
1
1
1
1
0
28
TAPARIA
0
32
TAPARIA
0
32
TAPARIA
0
1
ISI
0
2
ISI
0
2
ISI
161
Comparators stand with dial indicator LC
162 0.01mm.
Engineer‟s try square (knife-edge) 150 mm
163 blade.
164
165
Drilling machine bench sensitive 0-12 mm
cap motorised with chuck and key.
166
Forge portable hand blower 38 cm to 45 cm.
167
D.E. pedestal Grinding machine with 200mm
diameter wheels rough and smooth with
twist drill grinding
attachment.
168
169 Hammer B.P. 0.5 kg.
Cold chisel flat 25 x 200 mm
170
171 Engineers screw driver
Surface plate 400 mm x 400mm grade
172
Table for surface plate 900 x 900 x 1200
173 mm
Marking off table 1200 x 1200 x 900 mm
174 high
19 of 41 | P a g e
Scribing block universal 300 mm
175
176 V- Block 100/7 – 80 – A
Outside spring caliper 200 mm
177
178 Divider spring 200 mm
Inside spring caliper 200 mm
179
Straight edge steel 1 meter
180
Straight edge steel 500 mm
181
182 Hammer lead 1 kg.
Spindle blade screw driver 100 mm
183
Allen Hexagonal keys 2.5 to 12
184
Spanner D.E. series 2 (set of 7 pieces)
185
Adjustable spanner 300 mm
186
Reduction sleeve Morse 1-1, 3-1, 4-1, 4-2,
5-1, 5-2, 6-1,
0
4
ISI
0
4
ISI
0
4
ISI
0
4
ISI
0
4
ISI
0
2
ISI
0
2
ISI
0
4
ISI
0
8
ISI
0
4 set
ISI
0
12 set
ISI
0
4
ISI
0
4 nos
each
ISI
0
4
ISI
0
24 pairs
Assooted
ISI
0
2 sets
ADISSION
0
4 set
ADISSION
0
0
4 set
2
ADISSION
ADISSION
0
4 set
ADISSION
0
4
JK
187
Angle plate adjustable 250 x 150 x 175 mm
188
Solid parallels in pairs (different sizes) in
189 Metric
Number Drills H.S.S. (Parallel Shink
190
Twist drills 3 mm to 13 mm in step of 0.5
mm (parallel shank)
191
192 Centre drill A 1 to 5
193 Clamps C 200 mm
Drill H.S.S. taper shank (6 mm to 12 mm in
step of 0.5 mm)
194
195 File flat smooth 200 mm
20 of 41 | P a g e
Reamer adjustable 6 mm to 25 mm by 1
196 mm
Tool bits holder (Armstrong) L.H
197
Assorted tools and bit holders for lathe,
shaper, slotter & planner in different
shapes and sizes
0
2
ADISSION
0
8
ISI
0
10
ISI
0
2
ISI
0
8
ISI
0
0
0
4
2
2
ISI
ISI
ISI
0
2
ISI
0
2
ISI
0
2
ISI
0
4
ISI
0
0
0
2
2
4
ISI
ISI
ISI
0
4 sets
ISI
0
6
ADISSION
0
6
ADISSION
0
4
ADISSION
0
6
ADISSION
0
4
ADISSION
0
4
ADISSION
198
Table chuck 75 mm jaw swivel base
199
Machine vice 200 mm swivel base
200
201 Hand vice 50 mm jaw
202 Radius turning attachment
203 Angle turning attachment
Compound angle vice (standard sine)
204
205 Universal vice 150 mm
Universal table angle plate
206
Shaper tool holder turret type
207
208 Base chuck for slotter
209 shaper indexing center
210 Plier cutting 200 mm
Carbide tipped tools of different sizes and
shapes (throw away tips)
211
Cylindrical cutter 63 x 90 bore dia 32mm
212
Cylindrical cutter 80 x 90 bore dia. 27mm
213
Side and face cutter dia 80 x 8 x 27 mm
214
Side and face cutter dia 160 x 10x 32 mm
215
Side and face cutter dia 100 x 12x 27 mm
216
Side and face cutter dia 160 x 16x 32 mm
217
21 of 41 | P a g e
Side and face cutter dia 200 x 20 x 32
0
6
ADISSION
0
4
ADISSION
0
4
ADISSION
0
4
ADISSION
0
4
ADISSION
0
4
ADISSION
0
4
ADISSION
0
4
ADISSION
0
2
ADISSION
0
2
ADISSION
0
2
ADISSION
0
2
ADISSION
0
2
ADISSION
0
4
ADISSION
0
4
ADISSION
Shell End Mill Ø 50 x 36 x Ø 22 (preferably
inserted tip type)
0
4
ADISSION
Shell End Mill Ø 75 mm x 50 x Ø 27
(preferably inserted tip type)
0
4
ADISSION
218
Side and face cutter dia 100 x 10x 27
219
Equal angle cutter 450/100 x 27
220
Equal angle cutter 600/100 x 27
221
Equal angle cutter 900/100x 32
222
Double angle unequal cutter 50 x 12 x 550 x
223
27
Double angle unequal cutter 50 x 12 x 600 x
224
27
Double angle unequal cutter 50 x 12 x 700
225 x 32
Double angle unequal cutter 50 x 12 x 750
226 x 32
Single angle cutter 63 x 18 x 450 RH x 32
227
Single angle cutter 63 x 18 x 450 LH x 32
228
Single angle cutter 63 x 18 x 600 RH x 32
229
Single angle cutter 63 x 18 x 600 LH x 32
230
Slitting Saw cutter Ø 75 x 3 X Ø 27 mm
231
Slitting Saw cutter Ø 100 x 6 X Ø 27 mm
232
233
234
22 of 41 | P a g e
Parallel shank end mills Ø6, Ø10 and Ø 16
are (double fluted), Ø 20 mm & Ø 25mm
(four fluted)
0
8 each
ADISSION
0
4
ADISSION
0
2
ADISSION
0
2
ADISSION
0
2
ADISSION
0
2
MITUTOYA
0
2
MITUTOYA
0
0
0
0
2
2
MITUTOYA
MITUTOYA
0
2 set
ISI
0
1
ISI
0
2
ISI
0
1
ISI
2
2
ISI
0
2
ISI
235
‘T’ slot cutter with parallel shank- Ø 17.5 x
8 mm width x dia. of shank 8 mm
236
Concave Milling cutter Ø 63 x 6 radius x Ø
237 27 mm
Convex Milling cutter Ø 63 x 6 radius x Ø
238 27 mm
Disc type form milling cutter (involutes
form -2 module, 20° pressure angle)
239
Micrometer depth gauge 0-200 mm
240
Digital vernier caliper 0- 300 mm
241
Vernier height gauge 250 mm
242
243 Vernier gear tooth caliper
244 Bevel gauge 200 mm
Telescopic gauge 13 mm to 300 mm
245
Taper gauge M.T. No. 1, 2, 3, 4 & 5
246
Planer gauge standard size
247
Steel lockers for 12 trainee
248
Steel cup board 120 x 60 x 45 cm
249
250
First Aid Box
23 of 41 | P a g e
Lathe general purposes all geared height of
centers 150 mm to below Between centers
1200 mm supplied with jaw and 4 jaw
chuck, face plate, Taper turning
attachment, steadies etc. and set of lathe
tools
0
1
0
1
0
1
0
1
0
1
0
1
0
4
251
Drilling machine pillar 20 mm capacity
252
Silicon carbide grinder for carbide tipped
253 tools
Double ended Pedestal Grinder with 178
mm wheels(one fine and one rough wheel)
254
CNC Milling tools assorted
255
CNC hole machining tools assorted
256
257 File flat 200 mm smooth
Micrometer Outside 50to 75 mm Reading
258 0.01 mm
Micrometer Inside up to 25 mm Reading
259 0.01 mm
Micrometer Inside up to 50 to 150 mm
reading 0.01 mm
2
MITUTOYA
0
4
MITUTOYA
0
4
MITUTOYA
0
2
MITUTOYA
0
4
MITUTOYA
0
2
MITUTOYA
0
2
MITUTOYA
0
260
Depth Gauge Micrometer 0 to 150 mm
Reading 0.01 mm
261
Vernier Micrometer 0 - 25 mm o/s LC
0.001mm
262
Vernier Micrometer 25 - 50 mm outside
reading 0.001mm
263
Vernier Micrometer 0 inch to 1 inch.
Outside Reading 0.0001 inch
264
24 of 41 | P a g e
Sin Bar with centers 200 mm
265
Twist Drill taper shank 10-12 mm by 0.5
266 mm
Pillar type drill machine motorised up to
12mm cap
1 set
MITUTOYA
0
1 set
addition
0
1
0
1
0
2
1
ISI
267
Lathe S.S. & S.C. ( All geared head stock )
15 cm center height, to admit 120 cm
between centers. Machine to be motorized
and supplied with coolant installation, 1jaw Independent chuck 250 mm, 3-jaw selfcentering chuck 150 mm, fixed steady,
traveling steady, face plate, driving plate,
4-way tool post, quick change gear box for
Metric or British threads, live and dead
centers with taper attachments.
268
Torque wrench (14 to 68 Nm)
269
Hammer smith 2 kg with handle
270
271 Tongs raving 350mm
272 Tongs flat 350mm
Smith's square 45 cm x 30 cm
273
Cold set rodded 25 x 200 mm
274
Hot set rodded 25 x200mm
275
Swages top and bottom 12mm/19
276
Swage block 35 x 35 x 12cm
277
25 of 41 | P a g e
4
TAPARIA
2
ISI
4
4
ISI
ISI
2
2
ISI
ISI
2
ISI
1
ISI
4
ISI
2
ISI
2
ISI
1
ISI
1
ISI
1
ISI
1
ISI
1
ISI
Flatters (rodded) 55mm square
4
ISI
2
ISI
4
ISI
2
ISI
Anvil 50 kg
Anvil stand
Shovel
Trammel 30 cm
Rake
Quenching tank(to be made in the
institute)
Pocker
Hardle
Leather apron
Mallet
Snip straight 25cm
Setting hammers with handle
3
3
4
2
4
ISI
ISI
ISI
ISI
ISI
2
2
2
1
1
ISI
ISI
ISI
ISI
ISI
0
ISI
1
ISI
4
4
4
4
3
ISI
ISI
ISI
ISI
ISI
2
2
2
2
2
ISI
ISI
ISI
ISI
ISI
4
ISI
2
ISI
Planishing hammer
Snip bent 25 cm
Stake hatchet
Stake grooving
Gauge imperial sheet
Allen key set of 12 Pcs 2mm to 14 mm
4
4
4
4
2
ISI
ISI
ISI
ISI
ISI
2
2
2
2
1
ISI
ISI
ISI
ISI
ISI
6set
TAPARIA
Jalani
0
6 set
TAPARIA
Jalani
0
6
Taparia /
Ambika
0
1 Set
TATA/ Ashoka
Ley.
0
1 no
I.S.I.
0
1 no
I.S.I.
0
1 no
Tata / Maruti
Car
0
278
Fuller top and bottom 6mm 9mm(pair)
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
Philips screw Driver Set of 5 PCS 100mm to
298 300 mm
Spanner Ring Set of 12 Metric Size 6 to 32
299 mm
Air Brake Assembly Complete Truck/ Bus
300
Chaine Pully Block 3 ton Capacity with
Tripod Stand
301
Conecting Rod Alline Ment Fixture
302
Cut Section Working Model Automatic
Trans Mission Gear Box
303
26 of 41 | P a g e
Cut Section Working Model of Centifugal
Cluch Assembly
1
ISI
0
1
ISI
0
1
ISI
0
1 each
ISI
0
1
ISI
0
1 each
ISI
0
1 each
ISI
0
1no.
ISI
0
1 each
ISI
0
1no.
ISI
0
1no.
ISI
0
1no.
ISI
0
1no.
ISI
0
5 set
ISI
0
2
ISI
0
1
ISI
0
304
Cut Section Working Model of Single Plate
Cluch Assembly (car / Tractor)
305
Cut Section model for Dia phragm Cluch
306 assembly
Cylinder liner - Dry & wet Motocycle / Car
(complete Assembly with Piston)
307
Demo board ignition coil ignition system
308
Engine bearing model Ball Bearing, Tapper
Roller Bearing, Needle bearing
309
Different type of piston model flat head,
concave head, convex head, diflector type
310
Disk brake with caliper assembly Car/
311 M/cycle
Distributor –Duel advance type, reluctance
312 type
Drum brake assembly car/ m/cycle
313
Front axle (Reepa/joint) with stand
314
Fuel feel pump for diesel engine
315
Fuel injection pump inline/VE/ Distributor
along with speed tool & accessories
316
317 Gloves for welding
Hand shear universal 250 mm
318
Hand reamer adjustable 10.5 to 11.25mm
319
27 of 41 | P a g e
Injector – Multi hole type, Pintle type with
cleaning unit
320
321 Petrol nozzle
Tandon master cylinder with buster
322
323 Thermostate
Tubed tyre of car, trucks & motorcycle
324
Tubeless tyre of cars & trucks
325
Tyre split rim wheel assembly
326
Vaccuum asisled hydraulic brake assembly
327
Work bench 250 x 120 x 60 cm with 4 vices
12cm Jaw
4 each
ISI
0
1
ISI
0
4
ISI
0
2
Alto/ K-10
0
1 each
ISI
0
1 each
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
ISI
0
9
32
7
ISI
ISI
ISI
0
0
0
32
ISI
0
20
10
32
32
ISI
ISI
ISI
ISI
0
0
0
0
45 mtr
each
ISI
0
16
ISI
0
69
ISI
0
328
Working Model of power windows
329
Working model of torque converter
330
331
332
333
334
335
336
337
338
339
Work Bench 250X120X60 with hole vice 12 cm
jaw
Leather hand gloves 14"
Cotton hand Gloves 8”
Leather Apron leather
S.S Wire brush 5 rows and 3 rows
Leather hand sleeves 16”
Safety boots for welders
Leg guards leather
Rubber hose clips 1/2"
Arc welding cables multi cored copper 400/ 600
amp as per BIS
340
Arc welding single coloured glasses 108 mm x
82 mm x 3 mm. DIN 11A &12 A
4
341
Arc welding plain glass 108 mm x 82 mm x 3
342 mm.
28 of 41 | P a g e
4
Gas welding Goggles with Colour glass 3 or 4A
343 DIN
344 Spark lighter
345 AG 4 Grinding wheels
Centre punch 9 mm x 127 mm
346
Scriber 150mm double point
347
Hack saw frame fixed 300 mm
348
Hammer ball pane 1 kg with handle
349
350
351
352
353
Number punch 6 mm
Letter punch 6 mm
Magnifying glass 100mm dia
Spanner D.E 6mm to 32mm
Hammer sledge double faced 4 kg
354
355 Electrode holder 600 amps
356 Metal rack 182 x 152 x 45 cm
Flash back arrester (torch mounted)
357
Flash back arrester (cylinder mounted)
358
Welding Transformer with all accessories (300A
, OCV 60 – 100 V, 60% duty cycle)
60 nos
ISI
0
6
10
ISI
ISI
0
0
10
ISI
0
17
ISI
0
13
ISI
0
17
ISI
0
1 set
1 set
2
1 sets
ISI
ISI
ISI
ISI
0
0
0
0
1
ISI
0
6
1
ISI
ISI
0
0
4
ISI
0
4
ISI
0
1 set
359
0
ESAB/ LINK
Invertor based welding power source (300A)
360
DC arc welding rectifiers set with all accessories
(400A, OCV 60-100 V, 60% duty cycle)
1 nos
ESAB/ LINK
2 set
361
0
0
ESAB/ LINK
GMAW welding machine 400A capacity with air
cooled torch, Regulator, Gas preheater, Gas
hose and Standard accessories
362
29 of 41 | P a g e
2 set
0
ESAB/ LINK
AC/DC GTAW welding machine with water
cooled torch 300 A, Argon regulator, Gas hose,
water circulating system and standard
accessories.
2 set
363
0
ESAB/ LINK
Air plasma cutting equipment with all
accessories, cap. To cut 25mm clear out
1 set
364
0
ESAB/ LINK
Air compressor suitable for air plasma cutting
365 system
Auto Darkening Welding Helmet
366
Spot welding machine 15 KVA with all
367 accessories
Pedestal grinder fitted with course and
medium grain size grinding wheel dia 300 mm
1
2
1 set
ESAB/ LINK
ESAB/ LINK
ESAB/ LINK
1
368
0
0
0
0
ESAB/ LINK
Bench grinder fitted with fine grain size silicon
carbide green grinding wheel dia 150 mm
1
369
0
ESAB/ LINK
Hand shearing machine cap. To cut 6mm
370 sheets and flats
Oven,electrode drying 0 to 350 C, 10kg capacity
371
372 Argon gas cylinder
Anvil 12sq. Inches working area with stand
373
374 Swage block
375 Die penetrant testing kit
Magnetic particle testing machine prode type
with all standard accessories
1
ISI
0
1
ISI
0
2 nos
ISI
0
1
ISI
0
1
5 set
ISI
ISI
0
0
1 set
ISI
0
1 set
ISI
0
4 nos
ISI
0
1
ISI
0
1
ISI
0
376
Fire extinguishers (foam type and CO2 type)
377
378 Fire buckets with stand
Portable abrasive cut off m/c
379
380 Suitable gas cutting table
30 of 41 | P a g e
Seam welding machine (longitudinal) 75 KVA
with accessories
1
381
0
ESAB/ LINK
Portable CNC profile cutting system with all
standard accessories
1
382
0
ESAB/ LINK
Ultrasonic flaw detector with accessories
383
Submerged arc welding machine with
accessories(1000 amps)
1
0
1
0
384
ESAB/ LINK
Radiographic reference standard
385
386 Friction welding machine
387 X ray film illuminator
Fume extractor system connecting all the
welding booths
1
ISI
0
1
1
ISI
ISI
0
0
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
388
Pressure vessel codes (book or CD) IBR & ASME
sec IX
389
Structural welding codes D1.1 (Book or CD)
390
Universal testing machine 20T
391
Rockwell hardness testing machine
392
Impact testing machine (charpy & Izod
393 combined)
Electrician connector, screw driver 100 mm
insulated handle thin stem
2
394
0
Taparia
Heavy duty screw driver 200 mm
395
Punch centre 150 mm X 9 mm
396
Hammer ball peen With handle
397
398 Gimlet 6 mm.
399 Bradwal
Electrical screw driver insulated handle
400 250mm
31 of 41 | P a g e
2
9
2
2
2
2
Taparia
ISI
Taparia
Taparia
Taparia
0
0
0
0
0
0
401 Ladle
Chisel cold firmer 25 mm X 200 mm
402
403 Chisel 25 mm
404 Chisel 6 mm
405 Hygrometer
Thermometer 0 to 100 deg. Centigrade
406
407 Crimping tool
408 Wire stripper 20 cm
409 Chisel cold flat 12 mm
410 Mallet hard wood 0.50 kg.
Plier gas round nose 100 mm
411
412 Drill hand brace
Drill S.S. Twist block 2 mm, 5 mm 6 mm
413
File half round 200 mm 2nd cut
414
415 File flat 150 rough
416 File flat 250 mm bastard
Copper bit soldering iron 0.25 kg.
417
Pipe cutter to cut pipes above 5 cm dia
418
Stock and die set for 20 mm to 50 mm G.I.
419 pipe
Ohm meter series and shunt type
420
Multi meter 0 to 1000 M Ohms, 2.5 to 500
421 volt analog
422 Ammeter 0-25 A
A.C. Energy meter (3 phase1 5 amp. 230 V)
423
424 Growler
Inverter 1 KVA Input 12 volt DC, Output 220
volt AC with 12 battery
425
426 Domestic appliances –
427 b)Mixture and grinder
428 Resistance type starter
32 of 41 | P a g e
1
ISI
0
2
ISI
0
2
2
1
ISI
ISI
ISI
0
0
0
1
ISI
0
1
2
2
4
Taparia
Taparia
ISI
ISI
0
0
0
0
4
ISI
0
4
ISI
0
8 set
ISI
0
4
4
4
0
jk
jk
jk
0
0
1
ISI
0
1
ISI
0
2
ISI
0
1 each
ISI
0
2
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
1
1
ISI
ISI
ISI
0
0
0
DC power supply 0-30 V 2 amp
429
430
431
432
433
434
435
Hydrometer
MCB 16 Amp
Fire Extinguisher
Electric kettle 1500 watt
Fire buckets
Shaded pole motor
Synchronous motor 3 phase 3 HP 415 V,50 Hz,4
pole with accessories
436
437 Washing Machine
Motor Pump Set 1 HP Single Phase 240 Volt
438
439
440
441
442
443
444
445
446
447
448
449
1
ISI
0
1
2
2
1
2
1
ISI
ISI
ISI
ISI
ISI
ISI
0
0
0
0
0
0
1
ISI
0
1
Lg/ Samsung
1
Lubi/
Hindustan
Pattern punch
Pattern notcher
Water tub 60 cm dia
Thread cutter
Scale plastic 24"
Table sharpener
Blanket for padding of pressing table
0
0
0
0
0
0
3
3
1
17
17
2
ISI
ISI
ISI
ISI
ISI
ISI
0
1
ISI
Sprayer
Waste bin big/small
Stand for hangging dresses
Button sewing Machine
Steel almirah 195 x 90 x 60 cm
0
0
0
0
1
2
5
1
ISI
ISI
ISI
USHA
0
1
ISI
0
2
ISI
0
0
3
1
ISI
ISI
0
5
ISI
0
1
ISI
3
Bajaj/
Philips
USHA
ISI
450
Pigeon hole almirah 10 lockers and separate
locking arrangements for traninee
451
452 wall clock
453 Calculator desk type
Single desks for trainees with arrangement of
keeping books
454
455 Storage Almirah
Electric Automatic Stem press
456
457 Double Needle Machine
458 Button Sweing Machine
33 of 41 | P a g e
0
0
1
1
Scicers 25 cm
Pressing Table
white Borad with acc.
Rabber Mat
White Magnetic Borad with felt borad &
463 accesssories
464 Screw Driver 200mm
465 Screw Driver 100mm
466 Terminal Screw Driver 75mm
467 Knife Electrician db
468 Hammer Ball Peen. 0.25kg
469 Combination Pliers insulated 200 mm
470 Neon tester pencil bit type 500v
471 Try square 200 mm
Small crimping tools (assorted) 10 to 100mm( 5
472 no.)
473 Spanner set DE set of 6 (from6*7 to16*17)
474 Screw driver set(set of 5) 100 mm
475 150mm
476 200 mm
477 250 mm
478 300 mm
479 File half round 2nd cut 250 mm
480 File round 2nd cut 150 mm
481 Soldering iron 60w/ 230v
482 Neon tester 230 v
459
460
461
462
0
0
0
0
13
1
2
1
ISI
ISI
ISI
ISI
1
ISI
Taparia
Taparia
Taparia
ISI
Taparia
Taparia
Taparia
ISI
0
17
34
17
34
22
17
34
17
Taparia
Taparia
Taparia
ISI
Taparia
Taparia
Taparia
ISI
17
34
34
34
17
14
34
34
17
17
17
17
31
29
5
17
34
34
17
Taparia
Taparia
Taparia
Taparia
Taparia
Taparia
jk
jk
Taparia
Taparia
Taparia
34
17
34
34
17
34
14
34
34
34
2
Hot wire Ammeter 0-15 amp
483
484 Wheatstone Bridge
1
ISI
0
1
ISI
0
Megger (Insulation tester) 500v
485
486 Voltmeter M.C. 0-300v
Voltmeter M.C/Multi range 0.70,150,300 &600
487 V
2
ISI
0
1
ISI
1
ISI
1
ISI
1
ISI
Voltmeter M.C. Multi range 0-15,30,50 & 75 V
1
ISI
1
ISI
Voltmetyer centre zero 15-0-15 volts
1
ISI
1
ISI
Voltmeter M.I. multi-range 0-150,300,600 V
2
ISI
2
ISI
Voltmeter M.I. multi-range 0-50, 75, 150 V
1
ISI
1
ISI
488
489
490
491
34 of 41 | P a g e
Taparia
Taparia
Taparia
Taparia
Taparia
Taparia
jk
jk
Taparia
Taparia
Taparia
Ammeter M.I. 0-30 Amp,panel board type
2
ISI
2
ISI
Ammeter M.I. 0-5 Amp, Panel board type
2
ISI
2
ISI
Ammeter M.I. 0 - 10 Amp, Panel board
mounting type
1
ISI
1
ISI
Ammeter M.C. Centre zero 5-0-5 Amp
495
496 Ammeter MC 0 - 1 Amp
1
ISI
1
ISI
1
ISI
1
ISI
Field ragulator 0 -1000 ohmic, 2 Amps
1
ISI
1
ISI
4
ISI
4
ISI
4
ISI
2
ISI
3 Phase KW meter 15 A 440 v
1
ISI
1
ISI
Watt meter Dynamo meter trype 5 Amps and
250 v, 1.25 kw
1
ISI
1
ISI
Clamp on ammeter 0-25 A ,0-200 A
2
ISI
2
ISI
4
ISI
4
ISI
4
ISI
4
ISI
UPS 500 V A with battery 230 V
1
ISI
1
ISI
Current Transformer 10/1 , 20/1, 30/1, 50/5,
100/5 and 300/5 A
1
ISI
1
ISI
Potential transformer 220/110, 300/110,
440/110, 600/110
1
ISI
1
ISI
Miniature circuit breaker (MCb) 220 V / 6
508 Amps
2
ISI
0
ISI
Earth leakage circuit breaker (ELCB) 220 V / 25
mA
2
ISI
2
ISI
Metal clad circuit breaker (MCCB) 220 V / 1A
2
ISI
2
ISI
492
493
494
497
Single phase K.W.H meter digital 5 A,250 V A.
498 C
Single phase K.W.H meter analog 5 A,250 V A.
499 C
500
501
502
Three phase K.W.H meter analog 25 A,415 V A.
503 C
Three phase K.W.H meter digital 25 A,415 V A.
504 C
505
506
507
509
510
35 of 41 | P a g e
511
D.C. compound motor 3 H.P 250V with 4
point starter and field regulator (Laboratory
type)
1
ISI
0
D.C. shunt motor 3 H.P 250V with 3 point
starter and speed regulator (Laboratory type)
1
ISI
0
D.C. series motor with 2 point starter 3 H.P
250V with 3 point starter and speed regulator
(Laboratory type)
1
ISI
0
DC power supply 250 V DC , 25 Amp
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
M.G. Set consisting of squirrel cage
induction motor 5 H.P. 400 V cycle
with
directly coupled compound
generator
3K.W. 250 V with built
in panel
board consisting of :
1 No
ISI
0
3 phase air circuit breakers
1 set
ISI
0
Star delta starter (contact type 8 point) &
Automatic type
1
ISI
0
D.C circuit breaker
1
ISI
0
Suitable voltmeter on A.C. & D.C. side
1
ISI
0
Sunk field regulators
1
ISI
0
Suitable line ammeters on A.C. and D.C. side
1
ISI
0
Field circuit ammeter
1
ISI
0
Indicating lamps on both the sides ( A.C. & D.C.)
1
ISI
0
512
513
514
Capacitor motor 1/2 H.P. single phase 250
515 Phase
Split phase motor 1/2 H.P. single phase 250
516 Phase
517
Universal motor 1/2 H.P. . Ac/DC 250 V
518
a
b
c
d
e
f
g
h
36 of 41 | P a g e
Squirrel cage induction motor 3 H.P. 400 V
with D.O.L. starter
1
ISI
0
Squirrel cage induction motor 5 H.P. 400 V with
star delta starter
1
ISI
0
1
ISI
0
2
ISI
0
2
ISI
0
1
ISI
0
Single phasing preventer 415 v
525
526 D.O.L. starter
3
ISI
0
1
ISI
0
Two point starter for DC series motor
527
528 Soft starter 1ph
1
ISI
0
1
ISI
0
1
ISI
0
1
ISI
0
2KVA Alternator with 3 ph induction motor
1
ISI
0
5 HP Slip ring induction motor with rotor
resistance starter
1
ISI
0
1
ISI
0
Lead Acid Battery 75 Ah 12 V
1
ISI
0
Battery Charger 15 V , Current controlled
1
ISI
0
Solar street light lamp set 12 V , 18/ 24 watts
4
ISI
0
Hydraulic crimping tool for UG cable crimping
with bits 20 sq mm to 250 sq mm
1
ISI
0
2
ISI
0
2
ISI
0
1
ISI
0
519
520
521 Mannual star delta starter
Semi-automatic star Delta starter
522
523 Automatic star delta starter
524
Automatic Reverse Forward starter
Tachometer digital type Non contact type 06000 RPM
529
530 Flux meter
531
532
533 Lux meter
534
535
536
537
538 Transformer single phase 1 K.V.A. 250/100 v
Transformer three phase (oil cooled) 5 K.V.A.
440/220 v
539
540 Transformer oil testing kit Automatic 60 Kv
37 of 41 | P a g e
541 Autotransformer Single phase 0-300 V 1kVA
542 Autotransformer Three Phase 0-500 V 1 kVA
543 Forge with hand blower
2
2
1
ISI
ISI
ISI
0
0
0
1
ISI
0
1
1 each
1
1
ISI
ISI
ISI
ISI
0
0
0
0
Crimping tool for telephone/LAN cable
1
ISI
0
Rubber mating 2 meter x 1meter x 9mm
2
ISI
0
Rawal tool holder & Bit No.8 ,10 14, & 16
2 set
ISI
0
Set of Wall jumper octagonal 37mm X 450mm
and 37 X 600mm
4 set
ISI
4 set
2
ISI
0
Combination pliers insulated 200 mm insulated
16
ISI
16
ISI
Spanner set DE 6x7,8x9,10x11,12x13,14x15,16x17
set of 6
14
ISI
14
ISI
Bradawl 150 x 6 mm square pointed 150 x 6
mm square pointed
16
ISI
16
ISI
Wooden mallet 1 Kg.(75 mm x 15 mm)
16
ISI
16
ISI
Pliers side cutting insulated 200 mm
5
Taparia
0
Pliers flat nose insulated 150mm
1
Taparia
0
Pliers round nose insulated 200 mm
5
Taparia
0
Pliers long nose insulated 200 mm
5
Taparia
0
Screw driver heavy duty 200 mm
2
Taparia
0
Conduit pipe bending machine, suitable for
15mm,18mm,25mm and 30mm pipe
544
545
546
547
548
549
550
551
Bar magnet
Drill bit 6mm,8mm & 10mm
Horse shoe magnet
Crimping tool 25mm
552
553 Center punch 100mm
554
555
556
557
558
559
560
561
562
38 of 41 | P a g e
ISI
Screw driver heavy duty 300 mm
563
564 Firmer chisel 1''
565 Firmer chisel 1/2 "
5
Taparia
0
10
10
Taparia
Taparia
0
0
5
Taparia
0
5
0
19
Taparia
Taparia
ISI
5
0
0
File flat round 150 mm smooth
5
ISI
0
File round 300 mm 2nd cut
Adjustable spanner 300 mm
Foot print grip 250mm
Spirit level 300 mm
5
3
2
1
ISI
ISI
ISI
ISI
0
0
0
0
4
ISI
2
2
9
2 pair
ISI
ISI
ISI
0
0
0
1
ISI
0
2
ISI
0
1
ISI
0
Wire stripper 150 mm X 6 mm square pointed
566
567 Hammer Ball Peen 1.00 kg
568 Hammer cross Peen 0.50 kg
569 Scriber 150 mm
570
571
572
573
574
Electric soldering iron 125 watts 230-250 V
575
576 Blow lamp 1 Liter capacity
577 Hand vice 50 mm jaw
578 Rubber Gloves 5000 volts
579
Safty Belt with provision for keeping tools
Tower ladder on type wheels Min 10ft-Max
580 30ft
Portable extention ladder Aluminium 6 to 9
581 meters
582
583
584
585
586
File flate rough double cut 200 mm
21
File half round fine double cut 150 mm
17
file round fine double cut 150 mm
17
file flate fine double cut 150 mm
17
file square fine double cut 150 mm
17
File triangular fine double cut 150 mm
587
588 Center punch 100mm
589 Tri Sqare 150 mm
590 Divider Sping Joint 150 mm
39 of 41 | P a g e
17
17
17
17
0
J.K.
0
J.K.
0
J.K.
0
J.K.
0
J.K.
0
J.K.
ISI
ISI
ISI
0
0
0
ISI
ISI
caliper spring joint inside 150 mm
591
592 hammer ball pein 220 gm
17
ISI
0
17
ISI
0
cold chiesel flat & cross cut 150 mm
593
594 engeener rule 300 mm
17
ISI
0
17
ISI
0
tape measuring 10 meter gration in mm
17
ISI
0
Plier Combibnation Insulated length 200 mm
17
3
Plier Long Nose 200 mm
17
Plier flat nose 150 mm
line tester 500 v heavy Duty
Tweesers 10 cm
Knife Chiesel
Knife Stopping
Knife Hacking
Scraper
Pincer
Jib Saw Portable
Weight Per Liter Cup
Stop Watch
17
17
17
0
0
0
0
0
0
0
0
Taparia
AMBIKA
Taparia/
AMBIKA
AMBIKA
ISI
ISI
DFT Gauge Machine (Digital)
0
2
Gloss Meter (Digital)
Scrath HardNess Tester
Resistively Meter
Hegman Gauge
Dry Wash Spray Booth
Stainless Steel Rule 48"
0
0
0
0
0
0
2
2
2
2
1
17
Working Bench 240Cm X 120 cmX 75 cm
0
2
Porcelain Basin 450
Rule Wooden Size 24 "
Plumb Bob 2 OZ
Brush Softener 25mm
Brush Stenciling
Brush Writing
Brush flat wall 50 mm
Brush can paint
Brush Warnish 25 mm
0
0
0
0
0
0
0
0
0
17
34
34
34
34
34
34
34
34
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
40 of 41 | P a g e
Ambika
0
0
0
0
34
34
34
17
3
5
4
2
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
626 Brush Distemper 25 mm
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
0
34
Brush Round 9 mm Paint or Varnish
0
34
Brush Hog Hair Fitch
Brush Flat 12 mm varnish
Brush Dusting
Brush White wash
Knife put Glazier
Knife palette
Strainer Paint
Pallets
Stencil Knife
flatter Roller
Gloves
Spring Mask
lay brush
Face mask & Respirator
0
0
0
0
0
0
0
0
0
0
0
0
0
0
34
34
34
34
34
34
34
17
17
10
17
17
17
17
Drawing Table With Taper Top ( Iron Frame 1
1/4"sq pipe 42"X30" with Sunmica Top &
Beeding
19
0
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
ISI
Tool Holder to suit CNC machine for turning
Threading Groving (External & internal) Parting
of Operation, Boring, under Cutting with 20
inserts of each operation
643
ISI
2 each
2 each
Addission / ISI
Addission /
ISI
NOTE :- All Standard Tools, Machinery & Equipment items to be quoted as per
attached specification. For that items catalogue is to be attached.
i) We agree to supply the above goods in accordance with the technical specifications for a total
supply order price which will be issued to us within the period specified in the Invitation for
Tenders.
41 of 41 | P a g e
ii) We also confirm that the normal commercial warrantee/guarantee as mentioned in price bid
shall apply to the offered goods.
iii) We hereby certify that we have taken steps to ensure that no person acting for us or on our
behalf will engage in bribery.
iv) We undertake to abide by the above terms and conditions as mentioned in the tender
document.
Signature & Seal of Supplier
Note: - To be submitted in Envelope B-2nd
42 of 41 | P a g e