EVS-04-04e

advertisement
EVS-04-04e
List of relevant regulations for Electric Vehicle Safety
International (Europe)
ECE Regulation No.100 (02 series)
EVS GTR in under discussion (expected to release some by the end of 2014)
USA
FMVSS 305
Japan
Road Vehicles Act
Safety Regulations for Road Vehicles
(a) Attachment 101 – Technical Standard for Protection of Occupants against High
Voltage in Fuel Cell Vehicles;
(b) Attachment 110 – Technical Standard for Protection of Occupants against High
Voltage in Electric Vehicles and Hybrid Electric Vehicles;
(c) Attachment 111 – Technical Standard for Protection of Occupants against High
Voltage after Collision in Electric Vehicles and Hybrid Electric Vehicles;
Korea
Art
No.
2
18-2
18-3
91
Regulations for Motor Vehicle Safety
Standards
Last amended by MLTM Notification No.
515(08/31/2012)
Definition
52. “High voltage electric
device”
53.“Traction Battery” etc.
[01/23/2009]
High voltage electric
device
Table 5. Marking for
indication of high voltage
electric device
[01/23/2009]
Plan to revise in
2013
Traction Battery
[01/23/2009]
Fuel System
Table 11-3. High voltage
electric device crash test
[01/23/2009]
Plan to revise in
2013
Test Procedures for Motor Vehicle
Safety Standards
Last amended by MLTM Notification
No. 2012-508(08/07/2012)
Table 1 - Part 47.
Safety Test for High
voltage electric device
[02/19/2009]
Table 1 - Part 48.
Safety Test for
Traction battery
[02/19/2009]
Table 1 - Part 47.
Safety Test for High
voltage electric device
[02/19/2009]
Plan to revise in
2013
Plan to revise in
2013
Plan to revise in
2013
Number
KMVSS Art.2
Year
2009
Title
Definition
52. “High voltage electric device”
53.“Traction battery”
54. “Traction motor”
55. “Live parts”
KMVSS Art.18-2
2009
High voltage electric device
[Test Procedure for KMVSS] Table 1 - Part 47. Safety Test
for High voltage electric device
KMVSS Art.18-3
2009
Traction Battery
[Test Procedure for KMVSS] Table 1 - Part 48. Safety Test
for Traction battery
KMVSS Art.91
2009
Fuel System
Table 11-3. High voltage electric device crash test
[Test Procedure for KMVSS] Table 1 - Part 47. Safety Test
for High voltage electric device
List of relevant standards for Electric Vehicle Safety
As of May 2013
International standards
Number
ISO 6469-1
ISO 6469-2
ISO 6469-3
ISO 6469-4
ISO TR 8713
ISO 17409
ISO/IEC PAS
16898
ISO/IEC 151181
ISO/IEC 151182
ISO/IEC 151183
ISO/IEC 151184
ISO/IEC 151185
ISO 26262
Year
Title
2009 Electrically propelled road vehicles -- Safety specifications -Part 1: On-board rechargeable energy storage system
2009 Electrically propelled road vehicles -- Safety specifications -Part 2: Vehicle operational safety means and protection
against failures
2011 Electrically propelled road vehicles -- Safety specifications -Part 3: Protection of persons against electric shock
draft Electrically propelled road vehicles -- Safety specifications -Part 4: Post crash electrical safety
2012 Electrically propelled road vehicles -- Vocabulary
draft Electrically propelled road vehicles — Connection to an
external electric power supply — Safety specifications
2012 Electrically propelled road vehicles. Dimensions and
designation of secondary lithium-ion cells
draft Road vehicles -- Vehicle to grid communication interface -Part 1: General information and use-case definition
draft Road vehicles -- Vehicle to grid communication interface -Part 2: Network and application protocol requirements
draft Road vehicles -- Vehicle to grid Communication Interface -Part 3: Physical and data link layer requirements
draft Road vehicles -- Vehicle to grid communication interface -Part 4: Network and application protocol conformance test
draft Road vehicles -- Vehicle to grid communication interface -Part 5: Physical layer and data link layer conformance test
2011 Road vehicles -- Functional safety
Road vehicles – 60 V and 600 V single-core cables – Part 1:
Dimensions, test methods and requirements for copper conductor
cables
Road vehicles – 60 V and 600 V single-core cables – Part 2:
Dimensions test methods and requirements for aluminium
conductor
cables
ISO 6722-1
DIS
2011
ISO 6722-2
CD
2011
ISO 12405-1
2011 Electrically propelled road vehicles
Test specification for lithium-ion traction
battery packs and systems
Part 1: High-power applications
2012 Electrically propelled road vehicles
Test specification for lithium-ion traction
battery packs and systems
Part 2: High-energy applications
draft Error! Reference source not found.
2006 Fuel cell road vehicles -- Safety specifications -- Part 1:
Vehicle functional safety
ISO 12405-2
ISO 12405-3
ISO 23273-1
ISO 23273-3
IEC 60529
IEC 61851-1
2006 Fuel cell road vehicles -- Safety specifications -- Part 3:
Protection of persons against electric shock
2001 Degrees of protection provided by enclosures (IP Code)
2010 Electric vehicle conductive charging system - Part 1:
General requirements
Remark: Standard is under review
IEC 61851-21
2001 Electric vehicle conductive charging system - Part 21:
Electric vehicle requirements for conductive connection to
an a.c./d.c. supply
Remark: Standard is under review and will change into an EMC standard,
the relevant requirements for electrical safety move to ISO 17409
IEC 61851-21-1
draft
Electric vehicle conductive charging system - Part 21-1
Electric vehicle onboard charger EMC requirements for
conductive connection to a.c./d.c. supply
Electric vehicles conductive charging system - Part 24:
Control communication protocol between off-board d.c.
charger and electric vehicle
Electric vehicle wireless power transfer systems (WPT) –
Part 1: General requirements
Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles - Part 1: General
requirements
Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles - Part 2:
Dimensional compatibility and interchangeability
requirements for a.c. pin and contact-tube accessories
Plugs, socket-outlets, and vehicle couplers - conductive
charging of electric vehicles - Part 3: Dimensional
compatibility and interchangeability requirements for
dedicated d.c. and combined a.c./d.c. pin and contact-tube
vehicle couplers
Safety requirements for secondary batteries and battery
installations - Part 3: Traction batteries
Secondary lithium-ion cells for the propulsion of electric
road vehicles – Part 2: Reliability and abuse testing
Secondary lithium-ion cells for the propulsion of electric
road vehicles – Part 3: Safety requirements
Recommended Practice for Electric and Hybrid Electric
Vehicle Battery Systems Crash Integrity Testing
IEC 61851-24
draft
IEC 61980-1
1CD
IEC 62196-1
2011
IEC 62196-2
2011
IEC 62196-3
draft
IEC 62485-3
2010
IEC 62660-2
2010
IEC 62660-3
PNW
SAE J1766
2005
SAE J1772
2012 Electric Vehicle and Plug in Hybrid Electric Vehicle
Conductive Charge Coupler
2008 Recommended Practice for Packaging of Electric Vehicle
Battery Modules
2008 Electric-Drive Battery Pack System: Functional Guidelines
2009 Recommended Practice for General Fuel Cell Vehicle
Safety
2010 Electric and Hybrid Vehicle Propulsion Battery System
Safety Standard –
Lithium-based Rechargeable Cells
2009 Electric and Hybrid Electric Vehicle Rechargeable Energy
Remark: Standard is under review
SAE J1797
SAE J2289
SAE J2578
SAE J2929
SAE J2464
SAE J2344
SAE J2380
EN 1987-1
Storage System (RESS) Safety and Abuse Testing
2010 Guidelines for Electric Vehicle Safety
2009 Vibration Testing of Electric Vehicle Batteries
1997 Electrically propelled road vehicles – Specific requirements
EN 1987-2
1997 Electrically propelled road vehicles – Specific requirements
EN 1987-3
1998
for safety - Part 2: Functional safety means and
protection against failures
Electrically propelled road vehicles – Specific requirements
for safety - Part 3: Protection of users against electrical
hazards
EN 13447
EN 50272-1
2001 Electrically propelled road vehicles – Terminology
2010 Safety requirements for secondary batteries and battery
installations - Part 1: General safety information
2002 Safety requirements for secondary batteries and battery
installations - Part 3: Traction batteries
for safety - Part 1: On board energy storage
EN 50272-3
Standards in China
Number
Year
Title
GB/T18384.1-2001
Revising
GB/T18384.2-2001
Revising
GB/T18384.3-2001
Revising
GB/T 19751-2005
GB/T 24549-2009
2005
2009
GB/T 4094.2-2005
Revising
GB/T 28382-2012
2012
GB/T 20234.1-2011
2011
GB/T 20234.2-2011
2011
GB/T 20234.3-2011
2011
GB/T 27930-2011
2011
QC/T 895-2011
QC/T 741-2006
QC/T 742-2006
QC/T 743-2006
QC/T 744-2006
2011
Revising
2006
Revising
Revising
QC/T 897-2011
2011
GB/T XXX
Planning
GB/T XXX
Planning
GB/T XXX
Planning
Safety Requirements for Electric Vehicles - Part 1: REESS
Safety Requirements for Electric Vehicles - Part 2:
Function Safety Means and Protection Against Failures
Safety Requirements for Electric Vehicles - Part 3:
Protection against electrical shock
Safety Requirements for Hybrid Electric Vehicles
Safety Requirements for Fuel Cell Electric Vehicles
Electric Vehicles-Symbols for Controls, Indicators and
Tell-tales
Battery Electric Passenger Cars – Specifications
Connection Set of Conductive Charging for Electric
Vehicles - Part 1: General Requirements
Connection Set for Conductive Charging of Electric
Vehicles - Part2: AC Charging Coupler
Connection Set for Conductive Charging of Electric
Vehicles - Part3: DC Charging Coupler
Communication Protocols between Off-board Conductive
Charger and Battery Management System for Electric
Vehicle
On-board Conductive Charger for Electric Vehicles
Ultra-Capacitor for Electric Vehicles
Lead Acid Battery for Electric Vehicles
Lithium-ion Batteries for Electric Vehicles
NiMH Battery for Electric Vehicles
Battery Management System for Electric Vehicles Specifications
Front Impact Safety Requirements for Electric Vehicles
Lithium-ion Battery Test Procedure for Electric Vehicles –
High Power Application
Lithium-ion Battery Test Procedure for Electric Vehicles –
High Energy Application
GB/T XXX
Planning
QC/T XXX
Planning
Lithium-ion Battery Test Procedure for Electric Vehicles –
Safety Requirements
Battery Electric Vehicles Warning Sound and Test Method
Download