SECTION 07 71 00
MANUFACTURED ROOF SPECIALTIES
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2012 - 2015 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1
1.2
1.3
SECTION INCLUDES
A.
Formed Aluminum Gravel Copings and Stops:
1.
Copings. (AP Snap-Tight)
2.
Copings. (AP Standard)
3.
Gravel stops and accessories. (AP Standard)
4.
Fascia systems and galvanized water dams. (Type SP)
5.
Bullnose copings. (AP Snap-Tight)
6.
Formed gutters and downspouts. (AP)
7.
Formed conductor heads.
B.
Extruded Aluminum Gravel Stops and Copings:
1.
Fascia systems and galvanized water dams. (Type XP)
2.
Fascia systems and galvanized water dams. (Type AP)
3.
Drainable gravel stops. (Type ED)
4.
Extruded downspouts.
RELATED SECTIONS
A.
Section 07 50 00 - Membrane Roofing.
B.
Section 07 62 00 - Sheet Metal Flashing and Trim.
C.
Section 07 72 63 - Waste Containment Assemblies
D.
Section 07 90 00 - Joint Protection
E.
Section 22 14 26.13 - Roof Drains.
REFERENCES
A.
1.4
ASTM International (ASTM): Standards for aluminum alloy composition.
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings: Including but not limited to profiles, accessory items, anchorage and
07 71 00-1
flashing details, interface with adjacent construction, and dimensions.
1.5
1.6
1.7
D.
Selection Samples: For each finish product specified, two complete sets of color charts
representing manufacturer's full range of available finish options.
E.
Verification Samples: For each finish product specified, two sample chips representing
actual product, color, and patterns.
QUALITY ASSURANCE
A.
Single Source Requirements: To the greatest extent possible provide products specified in
this section by a single manufacturer.
B.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and
application workmanship.
1.
Finish areas designated by Architect.
2.
Do not proceed with remaining work until workmanship is approved by Architect.
3.
Rework mock-up area as required to produce acceptable work.
DELIVERY, STORAGE AND HANDLING
A.
Deliver, store and handle materials and products in strict compliance with manufacturer's
instructions and recommendations and industry standards.
B.
Store materials within recommended limits for temperature and humidity recommended by
manufacturer. Protect from damage.
C.
Store products in manufacturer's labeled packaging until ready for installation.
PROJECT CONDITIONS
A.
1.8
Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under
environmental conditions outside manufacturer's absolute limits.
SEQUENCING AND SCHEDULING
A.
Conference: Convene a pre-installation conference to establish procedures to maintain
optimum working conditions and to coordinate this work with related and adjacent work.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: Architectural Products Co. Inc., which is located at: P.O. Box 630
1290 Aviation Blvd.; Hebron, KY 41048; Toll Free Tel: 800-837-1001; Tel: 859-689-2210;
Fax: 859-689-2215; Email:request info (info@archprod.com); Web:www.archprod.com
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01 60
00 - Product Requirements.
FORMED ALUMINUM GRAVEL COPINGS AND STOPS
A.
Copings: AP Snap-Tight Copings as manufactured by Architectural Products Co. Inc.
1.
Description: Designed to seal top of parapet wall, does not require wood nailer, no
exposed fasteners; supplied with butyl strips to form an internal gutter system.
07 71 00-2
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
B.
Materials: 3003-H14 alloy aluminum.
Lengths: Provide in sections, 10 feet (305 cm) long, for field modification.
Joint Covers: 8 inches (20.3 cm) wide, concealed and.
Anchor Plates: 12 inches (30.5 cm) wide, 8 gauge, galvanized, 5 feet (152.5 cm) o.c.
Corners: Fully welded.
Cleats: As indicated on Drawings.
Cleats: None.
Cleats: Provide optional continuous cleats.
Thickness: As indicated on Drawings.
Thickness: 0.050 inch (1.27 mm).
Thickness: 0.063 inch (1.6 mm).
Thickness: 0.080 inch (2 mm).
Thickness: 0.125 inch (3.17 mm).
Surface Texture: Smooth, standard.
Surface Texture: Provide optional stucco embossed aluminum.
Finish: As indicated on Drawings.
Finish: Mill.
Finish: Clear anodized.
Finish: Light Bronze anodized.
Finish: Medium Bronze anodized.
Finish: Dark Bronze anodized.
Finish: Black anodized.
Finish: Duranodic.
Finish: Baked enamel.
Finish: Flurodize.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
Copings: AP Standard Copings as manufactured by Architectural Products Co. Inc.
1.
Description: Designed to seal the top of parapet wall; requires wood nailer.
2.
Materials: 3003-H14 alloy aluminum.
3.
Lengths: Provide in sections, 10 feet (305 cm) long, for field modification.
4.
Joint Covers: 8 inches (20.3 cm) wide, concealed.
5.
Hold-Down Clips: Continuous.
6.
Corners: Fully welded.
07 71 00-3
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
C.
Thickness: As indicated on Drawings.
Thickness: 0.050 inch (1.27 mm).
Thickness: 0.063 inch (1.6 mm).
Thickness: 0.080 inch (2 mm).
Thickness: 0.125 inch (3.17 mm).
Surface Texture: Smooth, standard.
Surface Texture: Provide optional stucco embossed aluminum.
Finish: As indicated on Drawings.
Finish: Mill.
Finish: Clear anodized.
Finish: Light Bronze anodized.
Finish: Medium Bronze anodized.
Finish: Dark Bronze anodized.
Finish: Black anodized.
Finish: Duranodic.
Finish: Baked enamel.
Finish: Flurodize.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
Gravel Stops and Accessories: AP Standard Gravel Stops and Accessories as manufactured
by Architectural Products Co. Inc.
1.
Description: Gravel stops, sills and extenders as indicated on Drawings.
2.
Materials: 3003-H14 alloy aluminum.
3.
Lengths: Provide in sections, 10 feet (305 cm) long, for field modification.
4.
Joint Covers: 8 inches (20.3 cm) wide, concealed.
5.
Hold-Down Clips: Concealed.
6.
Corners: Fully welded.
7.
Thickness: As indicated on Drawings.
8.
Thickness: 0.050 inch (1.27 mm).
9.
Thickness: 0.063 inch (1.6 mm).
10.
Thickness: 0.080 inch (2 mm).
11.
Thickness: 0.125 inch (3.17 mm).
12.
Surface Texture: Smooth, standard.
13.
Surface Texture: Provide optional stucco embossed aluminum.
07 71 00-4
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
D.
Finish: As indicated on Drawings.
Finish: Mill.
Finish: Clear anodized.
Finish: Light Bronze anodized.
Finish: Medium Bronze anodized.
Finish: Dark Bronze anodized.
Finish: Black anodized.
Finish: Duranodic.
Finish: Baked enamel.
Finish: Flurodize.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
Fascia Systems and Galvanized Water Dams: Fascia Systems Type SP and Galvanized
Water Dams as manufactured by Architectural Products Co. Inc.
1.
Description: Compatible with single-ply roofs.
2.
Material: Aluminum.
3.
Lengths: Provide in sections, 10 feet (305 cm) long, for field modification.
4.
Corners: Fully welded.
5.
Joint Covers: Concealed.
6.
Water Dams: 24-gauge galvanized steel.
7.
Type: Custom heights and thickness, as indicated on Drawings.
8.
Type: Standard sizes as indicated on Drawings.
9.
Type: SP425.
a.
' A' Face Dimension: 4-1/4 inches (11 cm).
b.
Thickness: 0.050 inch (1.27 mm).
10.
Type: SP525.
a.
' A' Face Dimension: 5-1/4 inches (13 cm).
b.
Thickness: 0.050 inch (1.27 mm).
11.
Type: SP600.
a.
' A' Face Dimension: 6 inches (15 cm).
b.
Thickness: 0.050 inch (1.27 mm).
12.
Type: SP800.
a.
' A' Face Dimension: 8 inches (20 cm).
b.
Thickness: 0.063 inch (1.60 mm).
07 71 00-5
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
E.
Type: SP1000.
a.
' A' Face Dimension: 10 inches (25 cm).
b.
Thickness: 0.063 inch (1.60 mm).
Surface Texture: Smooth, standard.
Surface Texture: Provide optional stucco embossed aluminum.
Finish: As indicated on Drawings.
Finish: Mill.
Finish: Clear anodized.
Finish: Light Bronze anodized.
Finish: Medium Bronze anodized.
Finish: Dark Bronze anodized.
Finish: Black anodized.
Finish: Duranodic.
Finish: Baked enamel.
Finish: Flurodize.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
Bullnose Copings: AP Snap-Tight Bullnose Copings as manufactured by Architectural
Products Co. Inc.
1.
Description: Supplied with butyl strips to form an internal gutter system.
2.
Corners: Fully welded.
3.
Thickness: As indicated on Drawings.
4.
Thickness: 0.050 inch (1.27 mm).
5.
Thickness: 0.063 inch (1.6 mm).
6.
Materials: 5005-H34 alloy aluminum.
7.
Lengths: Provide in sections, 10 feet (305 cm) long, for field modification.
8.
Joint Covers: 6 inches (15 cm) wide, concealed joint covers and
9.
Anchor Plates: 12 inches (30.5 cm) wide, 18-gauge, galvanized, 5 feet (152.5 cm) o.c.
10.
Surface Texture: Smooth, standard.
11.
Surface Texture: Provide optional stucco embossed aluminum.
12.
Finish: As indicated on Drawings.
13.
Finish: Mill.
14.
Finish: Clear anodized.
15.
Finish: Light Bronze anodized.
07 71 00-6
16.
17.
18.
19.
20.
21.
22.
F.
Finish: Medium Bronze anodized.
Finish: Dark Bronze anodized.
Finish: Black anodized.
Finish: Duranodic.
Finish: Baked enamel.
Finish: Flurodize.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
Formed Gutters and Downspouts: Formed AP Gutters and Downspouts as manufactured by
Architectural Products Co. Inc.
1.
Description: Custom formed aluminum gutters and downspouts.
2.
Type: As indicated on Drawings
3.
Type: Standard gutters.
4.
Type: Formed gutter.
5.
Type: Heavy extruded aluminum downspouts in areas designated on Drawings.
6.
Surface Texture: Smooth, standard.
7.
Surface Texture: Provide optional stucco embossed aluminum.
8.
Finish: As indicated on Drawings.
9.
Finish: Mill.
10.
Finish: Clear anodized.
11.
Finish: Light Bronze anodized.
12.
Finish: Medium Bronze anodized.
13.
Finish: Dark Bronze anodized.
14.
Finish: Black anodized.
15.
Finish: Duranodic.
16.
Finish: Baked enamel.
17.
Finish: Flurodize.
18.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
07 71 00-7
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
q.
r.
s.
t.
u.
v.
G.
Color: Standard color, Rawhide.
Color: Standard color, Sierra Tan.
Color: Standard color, Slate Blue.
Color: Standard color, Regal Blue.
Color: Standard color, Terra Cotta.
Color: Standard color, Patina Green.
Color: Standard color, Hemlock Green.
Color: Standard color, Forest Green.
Color: Standard color, Redwood.
Color: Standard color, Light Gray.
Color: Standard color, Slate Gray.
Color: Standard color, Dark Gray.
Color: Standard color, Mansard Brown.
Color: Standard color, Medium Bronze.
Color: Standard color, Dark Bronze.
Color: Standard color, Matte Black.
Formed Conductor Heads: Formed Conductor Heads as manufactured by Architectural
Products Co. Inc.
1.
Description: Fully-welded aluminum conductor heads.
2.
Type: As indicated on Drawings
3.
Type: Standard conductor heads.
4.
Thickness: 0.050 inch (1.27 mm).
5.
Thickness: 0.063 inch (1.6 mm).
6.
Thickness: 0.080 inch (2 mm).
7.
Thickness: 0.125 inch (3.1 mm).
8.
Finish: As indicated on Drawings.
9.
Finish: Mill.
10.
Finish: Clear anodized.
11.
Finish: Light Bronze anodized.
12.
Finish: Medium Bronze anodized.
13.
Finish: Dark Bronze anodized.
14.
Finish: Black anodized.
15.
Finish: Duranodic.
16.
Finish: Baked enamel.
17.
Finish: Flurodize.
18.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
07 71 00-8
t.
u.
v.
2.3
Color: Standard color, Medium Bronze.
Color: Standard color, Dark Bronze.
Color: Standard color, Matte Black.
EXTRUDED ALUMINUM GRAVEL STOPS AND COPINGS
A.
Fascia Systems And Galvanized Water Dams: Fascia Systems Type XP and Galvanized
Water Dams as manufactured by Architectural Products Co. Inc.
1.
Description: For use in single ply roofs.
2.
Type: As indicated on Drawings.
3.
Type: XP-600.
4.
Type: XP-800.
5.
Fascia Materials: 6063-T52 alloy aluminum.
6.
Lengths: Provide in sections, 10 feet (305 cm) long, for field modification.
7.
Water Dams: 24 gauge galvanized steel.
8.
Surface Texture: Smooth, standard.
9.
Surface Texture: Provide optional stucco embossed aluminum.
10.
Finish: As indicated on Drawings.
11.
Finish: Mill.
12.
Finish: Clear anodized.
13.
Finish: Light Bronze anodized.
14.
Finish: Medium Bronze anodized.
15.
Finish: Dark Bronze anodized.
16.
Finish: Black anodized.
17.
Finish: Duranodic.
18.
Finish: Baked enamel.
19.
Finish: Flurodize.
20.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
B.
Fascia Systems And Galvanized Water Dams: Fascia Systems Type AP and Galvanized
Water Dams as manufactured by Architectural Products Co. Inc.
1.
Description: For use with built up or modified bitumen roofs.
2.
Fascia Materials: 6063-T52 alloy aluminum.
3.
Lengths: Provide in sections, 10 feet (305 cm) long, for field modification.
07 71 00-9
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Water Dams: Galvanized steel.
Type: As indicated on Drawings.
Type: AP525, 24 gauge.
Type: AP600, 24 gauge.
Type: AP800, 22 gauge.
Type: AP1000, 20 gauge.
Surface Texture: Smooth, standard.
Surface Texture: Provide optional stucco embossed aluminum.
Finish: As indicated on Drawings.
Finish: Mill.
Finish: Clear anodized.
Finish: Light Bronze anodized.
Finish: Medium Bronze anodized.
Finish: Dark Bronze anodized.
Finish: Black anodized.
Finish: Duranodic.
Finish: Baked enamel.
Finish: Flurodize.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
C.
Drainable Gravel Stops: Drainable Gravel Stops Type ED-425 as manufactured by
Architectural Products Co. Inc.
1.
Description: 0.078 inch thick extruded aluminum gravel stop designed to let water
drain off roof.
2.
Gravel Stop Materials: 6063-T52 alloy aluminum.
3.
Length: Provided in sections, 119-1/2 inches (303.5 cm), for field modification
D.
Extruded Downspouts: Extruded Downspouts as manufactured by Architectural Products
Co. Inc.
1.
Description: 0.125 inch (3.1 mm) thick extruded aluminum downspout for high abuse
areas.
2.
Application: As indicated on Drawings.
3.
Application: Full height.
4.
Application: Cover accessible areas.
07 71 00-10
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Size: As indicated on Drawings.
Size: 3 inches x 3 inches (76 mm x 76 mm).
Size: 3 inches x 4 inches (76 mm x 102 mm).
Size: 4 inches x 4 inches (102 mm x 102 mm).
Size: 4 inches x 6 inches (102 mm x 152 mm).
Finish: As indicated on Drawings.
Finish: Clear anodized.
Finish: Light Bronze anodized.
Finish: Medium Bronze anodized.
Finish: Dark Bronze anodized.
Finish: Black anodized.
Finish: Fluorocarbon, such as Kynar 500 or manufacturer approved equal.
a.
Color: As indicated on Drawings.
b.
Color: Non-standard color, ________.
c.
Color: Standard color, Bone White.
d.
Color: Standard color, Stone White.
e.
Color: Standard color, Almond.
f.
Color: Standard color, Sandstone.
g.
Color: Standard color, Rawhide.
h.
Color: Standard color, Sierra Tan.
i.
Color: Standard color, Slate Blue.
j.
Color: Standard color, Regal Blue.
k.
Color: Standard color, Terra Cotta.
l.
Color: Standard color, Patina Green.
m.
Color: Standard color, Hemlock Green.
n.
Color: Standard color, Forest Green.
o.
Color: Standard color, Redwood.
p.
Color: Standard color, Light Gray.
q.
Color: Standard color, Slate Gray.
r.
Color: Standard color, Dark Gray.
s.
Color: Standard color, Mansard Brown.
t.
Color: Standard color, Medium Bronze.
u.
Color: Standard color, Dark Bronze.
v.
Color: Standard color, Matte Black.
PART 3 EXECUTION
3.1
3.2
PREPARATION
A.
Prepare substrates using the methods recommended by the manufacturer for achieving the
best result for the substrate under the project conditions.
B.
Do not proceed with installation until substrates have been prepared using the methods
recommended by the manufacturer and deviations from manufacturer's recommended
tolerances are corrected. Commencement of installation constitutes acceptance of
conditions.
C.
If preparation is the responsibility of another installer, notify Architect in writing of deviations
from manufacturer's recommended installation tolerances and conditions.
INSTALLATION
A.
3.3
Install in accordance with manufacturer's installation instructions and in proper relationship
with adjacent construction.
CLEANING AND PROTECTION
07 71 00-11
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
07 71 00-12