Highway
Reno
traffic products
CTC, Inc., distributes traffic products designed to meet public agency specifications for equipment used
to control vehicle and pedestrian traffic on public roadways in North America. CTC distributes the
following product lines: (NOTE: Please hyperlink each of these product categories to the appropriate
page.)


CTC highway products
Reno A&E traffic products
On the Reno page:
Reno traffic product categories include: (NOTE: Please hyperlink each of these product categories to
the appropriate page.)
• Access products
•Traffic products
Reno traffic products include: (NOTE: Please hyperlink each of these product categories to the
appropriate section.)
• Bus interface units
• Card racks
• DC isolator
• Detectors (rack mount)
• Detectors (shelf mount)
• Flashers
• Harnesses
• Load switches
• Monitors
• Power supplies
• Switch panels
• Test equipment
• Transfer relays
Detectors (shelf mount)
U Series
The U series detectors are four channel detectors
with full featured LCD interface.
•Meets or exceeds NEMA TS 1 specification
•Patented audible detect signal on all versions
•Directional logic capability
•Auxiliary connector allows Phase Green input for
each channel
Ordering information:
Model U-1200-z*
z = R: Relay outputs
SS: Solid-state outputs
Includes programmable options 1-5 and 9-12
*Requires 804 series harness.
Harness 415-2104-10 required for Phase Green
inputs
NOTE: Insert this hyperlinked title under “Data Sheet”
•
U series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
U series operating instructions
 U series manual
T-100 Series
The T-100 series detectors are one channel
detectors with DIP switch user interface.
•NEMA TS1 compatible
•Patented audible detect signal on all versions
Ordering information:
Model T-100-z*
z = R: Relay outputs
SS: Solid-state outputs
*Requires two 801 series harnesses
Insert these hyperlinked titles and documentation under “Data sheet”
•
T-100 series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
T-100 series operating instructions
 T-100 series manual
T-110 Series
The T-110 series detectors are one channel
detectors with DIP switch user interface.
•NEMA TS1 compatible
•Patented audible detect signal on all versions
•Call delay and Call extension
Ordering information:
Model T-110-z*
z = R: Relay outputs
SS: Solid-state outputs
*Requires 801 series harness
Insert these hyperlinked titles and documentation under “Data sheet”
•
T-110 series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
T-110 series operating instructions
•
T-110 series manual
T-210 Series
The T-210 series detectors are two channel
detectors with DIP switch user interface.
•NEMA TS1 compatible
•Patented audible detect signal on all versions
•Call delay and Call extension
Ordering information:
Model T-210-z*
z = R: Relay outputs
SS: Solid-state outputs
*Requires two 801 series harnesses
Insert these hyperlinked titles and documentation under “Data sheet”
•
T-210 series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
T-210 series operating instructions
•
T-210 series manual
T-400 Series
The T-400 series detectors are four channel
detectors with DIP switch user interface.
•NEMA TS1 compatible
•Patented audible detect signal on all versions
•Call delay and Call extension
Ordering information:
Model T-400-z*
z = R: Relay outputs
SS: Solid-state outputs
*Requires 804 series harness
Insert these hyperlinked titles and documentation under “Data sheet”
•
T-400 series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
T-400 series operating instructions
•
T-400 series manual
Flashers
FL-200
The Model FL-200 Flasher is designed to meet or
exceed NEMA Standards TS 1-1994 and TS 2-1998
and is compatible with Type 170 installations.
Model FL-200 Flashers are dual circuit, solid state
devices that are constructed with extruded
aluminum exterior components that promote
rapid heat dissipation to ensure lower operating
temperatures and dependable long term
operation. All internal components are readily
accessible to facilitate replacement.
Insert these hyperlinked titles and documentation under “Data sheet”
•
Model FL-200 data sheet
Harnesses
Model 801 10-pin harness
Connector: MS-3106A-18-1S (10 pin)
Length: 4, 6, or 8 feet
Wire size: #22 AWG
Wire type: MIL-W-16878/17 Type B/N
Outer jacket: PVC (gray)
Termination: None
Twisted wires: Pins D and E (red and orange) loop wires
Reno A&E P/N: 801-4 (4-ft. length)
801-6 (6-ft. length)
801-8 (8-ft. length)
Insert these hyperlinked titles and documentation under “Data sheet”
•
Harness data sheet
Model 804 19-pin harness
Connector: MS-3106A-22-14S (19 pin)
Length: 4, 6, or 8 feet
Wire size: #22 AWG
Wire type: MIL-W-16878/1 Type B/N
Outer jacket: PVC (black)
Termination: None
Twisted wires: Pins D and E (brown and
white/brown)
Pins F and G (red and white/red)
Pins J and K (orange and white/orange)
Pins L and M (yellow and white/yellow)
Reno A&E P/N: 801-4 (4-ft. length)
801-6 (6-ft. length)
801-8 (8-ft. length)
Insert these hyperlinked titles and documentation under “Data sheet”
•
Harness data sheet
Model 415-2104-10: 4 Pin Harness (Phase Green
Interface)
Use with Models: U-1100, U-1200, and U-1300
Connector: Amp 206060-1 (4 pin)
Length: 10 ft.
Wire type UL 1015
Wire size: #18 AWG
Termination: None
Insert these hyperlinked titles and documentation under “Data sheet”
•
Harness data sheet
Load Switches
Model LS-200
The Model LS-200 load switch exceeds industry
standards by featuring two LED indicators per
individual circuit (one for the input, one for the
output). This feature provides a means of quickly
and accurately conveying information regarding
the input and output states of each circuit to assist
technicians in troubleshooting potential cabinet
problems.



Meets or exceeds NEMA Standards TS 11994 and TS 2-1998
Compatible with Type 170 installations
Solid state
Model LS-200 load switches are three circuit, solid
state devices that are constructed with extruded
aluminum exterior components that promote
rapid heat dissipation to ensure lower operating
temperatures and dependable, long term
operation. All internal components are readily
accessible to facilitate replacement.
Insert these hyperlinked titles and documentation under “Data sheet”
•
Model LS-200 data sheet
Monitors
MMU-1600D Series
*After purchase, this MMU can be upgraded to include
Ethernet capability.
The Model MMU-1600D malfunction management
unit (MMU) monitors up to 16 traffic signal
channels for conflicting inputs, improper
sequencing, incorrect timing, and invalid voltage
levels.
•NEMA TS-1 (Type 12) and TS-2 compatible
•Advanced diagnostic features isolate problems
•Event logging provides a detailed, time-stamped
record of
◦Time changes
◦Monitor resets
◦Configuration changes
◦Prior faults
◦AC line voltages
◦Signal sequence data
•Unique diagnostic display mode allows viewing of
the following on the front of the monitor during
operation:
◦ Line voltage
◦Configuration information
◦Program card settings
◦Last 20 faults
•Advanced flashing yellow arrow left turn
monitoring available in the industry
•Optional Ethernet support - Can be added after
initial purchase
◦ Ethernet port allows communications
with the monitor through a settable
Ethernet network IP address.
◦Both the Ethernet port and the RS-232
port can be used at the same time
• Can be upgraded to the graphics version (MMU1600G)
•Software available allowing for configuration,
logging, and documentation
Insert these hyperlinked titles and documentation under “Data sheet”
•
MMU-1600D series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
MMU-1600D series operating instructions 1.7.19
 Engineering Bulletin 020
 Engineering Bulletin 021
 Engineering Bulletin 022
 Application Notes 002 (These are in the folder as “AN-002” etc.)
 Application Notes 003
 Application Notes 004
 Application Notes 005
MMU-1600G Series
The Model MMU-1600G malfunction management
unit (MMU) monitors up to 16 traffic signal
channels for conflicting inputs, improper
sequencing, incorrect timing, and invalid voltage
levels.
 Includes an organic light emitting diode (OLED)
display
•OLED display provides readability in any light
condition and functions reliably over a
temperature range of -22º F to +176º F (-30º C to
+80º C)
• All logs can be viewed on the OLED graphic
display (no computer interface needed)
•All AC field voltages can be displayed on a single
screen, including leakage voltages on all load
switch outputs
•Context sensitive ”help” system assists
configuration and troubleshooting tasks
•Event logging provides detailed, time-stamped
records of:
◦Time changes
◦Monitor resets
◦Configuration changes
◦Prior faults
◦AC line voltages
◦Signal sequence data
•Configuration wizard easily configures the
monitor for most applications in just a few minutes
•Optional Ethernet port - can be added after initial
purchase ◦ Allows communication with the
monitor through a settable Ethernet network IP
address.
◦Both the Ethernet port and the RS-232
port can be used at the same time
•Advanced flashing yellow arrow left turn
monitoring
•Operates in either Type 16 mode (sixteen
channels) or Type 12 mode (twelve channels)
•Compliant with the following NEMA Standards:
◦NEMA TS 2-2003
◦NEMA TS1-1989 (Type 12 mode)
•NEMA compliance certified by an independent
test lab
•Software available allowing for configuration,
logging, and documentation
Insert these hyperlinked titles and documentation under “Data sheet”
•
MMU-1600G series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
MMU-1600G series operating instructions 1.7.19
•
Engineering Bulletin 019
 Engineering Bulletin 020
 Engineering Bulletin 021
 Engineering Bulletin 022
 Application Notes 002
 Application Notes 003
 Application Notes 004
 Application Notes 005
2018 Series
The Model 2018 conflict monitor is the first 170 |
2070 compatible monitor to include features that
simplify monitoring of complex intersections. The
2018 provides enhanced monitoring functions,
event logging capability, database management,
and advanced diagnostic features. The 2018 meets
the requirements set forth in Chapter 3, Section 6,
of the Caltrans Transportation Electrical
Equipment Specifications (TEES) dated 08/16/02.
•Operates in Type 210 or Type 2010 mode
•Accepts 16- and 18- channel program cards
•Advanced diagnostic features isolate problems
•Event logging provides detailed, time-stamped
records of
◦Time changes
◦Monitor resets
◦Configuration changes
◦Prior faults
◦AC line voltages
◦Signal sequence data
•Unique diagnostic display mode allows viewing of
on the front of the monitor while in operation:
◦ Line voltage
◦Configuration information
◦Program card settings
◦Last 20 faults
 Advanced flashing yellow arrow left turn
monitoring
•LED signal head thresholds provide enhanced
monitoring for LED indications
•Software available allowing for configuration,
logging, and documentation
Insert these hyperlinked titles and documentation under “Data sheet”
•
2018 series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
2018 series operating instructions 1.6.0
•
Engineering Bulletin 004
 Engineering Bulletin 005
 Engineering Bulletin 006
 Engineering Bulletin 010
 Engineering Bulletin 011
 Engineering Bulletin 012
 Engineering Bulletin 025
 Application Notes 001
 Application Notes 002
 Application Notes 004
 Application Notes 005
Power Supplies
N Series
The N series power supply transforms an AC input
source into regulated 12 or 16 VDC.
•Front panel LEDs provide indications of AC input
voltage and DC output voltage
•Power switch controls input line voltage
•Six-ft. DC output harness included
•Optional wall-mount bracket available
•DC output is rated for a maximum of 1.4 amp of
load current
Ordering information:
Model N-yyyy-xxx (z)*
yyyy = 120A: 120 VAC input power
240A: 240 VAC input power
xxx =12D: 12VDC output power
16D: 16VDC output power
z = Blank: Wall mount bracket not included
Wall Mount: Wall-mount bracket included
*When ordering, please specify whether or not you
want the wall-mount configuration.
Insert these hyperlinked titles and documentation under “Data sheet”
•
N series data sheet
Insert these hyperlinked titles and documentation under “Other docs”
•
N series operating instructions
Q Series
The Q series power supply transforms an AC input
source into unregulated 24 VDC.
•Provides two or four unregulated 24 VDC outputs
rated at 300mA
•Each output is indicated by a super-bright LED
•Outputs can be paralleled for increased current
capacity
•Power switch controls input line voltage
•Fits all standard sized card racks
Ordering information:
Model Q-z (yyyy/xxxx)*
z = 2: Two outputs, up to 8 channels
4: Four outputs, up to 16 channels
yyyy = 120V: 120 VAC input power
240V: 240 VAC input power
xxxx =50Hz: 50Hz input voltage frequency
60Hz: 60Hz input voltage frequency
*When ordering, be certain that the power supply
input voltage and frequency match the card rack
input voltage and frequency configuration.
Insert these hyperlinked titles and documentation under “Data sheet”
•
Q series data sheet (labeled Q2 and Q4)
Insert these hyperlinked titles and documentation under “Other docs”
•
Q series operating instructions
Q-12 | Q-24 Series
The Q-12 and Q-24 power supplies are powered
from 120 VAC, 50/60 Hz line voltage and provide
either 12 VDC or 24 VDC at 5 amps. The input line
voltage and DC output are separately fused. A
single regulated output voltage is connected to
eight connector pins.
•Plug-in regulated power supplies rated for 5
amps continuous load
•Switching design provides high efficiency
•Power factor greater than 0.95
•Power switch controls AC line voltage
•AC input is fuse protected
•DC output is fuse protected
•Input voltage - 85 to 135 VAC, 50/60 Hz
•Pin connections compatible with Reno A&E
Model Q-2 and Q-4 power supplies
Ordering information:
Model Q-yy
yy = 12: provides 12 VDC output
24: provides 24 VDC output
Insert these hyperlinked titles and documentation under “Data sheet”
•
Q-12 | Q-24 series data sheet (labeled Q2 and Q4)
Insert these hyperlinked titles and documentation under “Other docs”
•
Q-12 | Q-24 operating instructions
TS-2
The TS-2 cabinet power supply meets all NEMA TS2 2003 standards.
•AC line input voltage - 85 VAC to 135 VAC, 50/60
Hz
•AC input - fuse protected
•Power factor correction >= 0.95
•12 VDC output - 5 amps
•24 VDC output - 5 amps
•DC outputs - fuse protection + LED indications
•12 VAC unregulated output @ 250 mA
•Line frequency square wave output
•Advanced switch mode design provides high
efficiency
•Low conducted and radiated emissions
Insert these hyperlinked titles and documentation under “Data sheet”
•
TS-2 data sheet
Switch Panels
SP-300
The SP-300 replaces a detector switch panel
normally found on a cabinet door. It takes up less
space than a conventionally located detector
switch panel and allows easy monitoring of the
detectors while they are being tested.
•Designed for use in the M-6D detector rack
•Conditions the call outputs of up to four, fourchannel detectors
•Each channel has a three-position toggle switch
that can be used to set the output of the channel
to one of three states:
◦DET - Normal operation
◦OFF - Channel off
◦ON - Continuous call state
•Each channel has a super-bright LED to indicate a
call output to the controller
Insert these hyperlinked titles and documentation under “Data sheet”
•
SP-300 data sheet (labeled Q2 and Q4)
Insert these hyperlinked titles and documentation under “Other docs”
•
SP-300 operating instructions