Publications by topics
a) Textbooks and Monographs
Textbooks for undergraduate studies in mechanics and computational
methods
Milos Kojic, Dynamics - Theory and Examples , Naucna knjiga, Belgrade, 1979,
1990.
Milos Kojic and Milan Micunovic, Kinematics, Naucna knjiga, Belgrade, 1982,
1990.
Milos Kojic and Milan Micunovic, Theory of Vibrations, Naucna knjiga, 1984,
1991.
Milos Kojic, Radovan Slavkovic, Miroslav Zivkovic and Nenad Grujovic, Finite
Element Method I - Linear Analysis, Faculty of Mechanical Engineering,
Kragujevac, 1998.
Textbooks for graduate studies in mechanics
Milos Kojic, Theory of Elasticity, Faculty of Mechanical Engineering,
Kragujevac, 1978.
Milos Kojic, Applied Plasticity, Faculty of Mechanical Engineering, Kragujevac
and Faculty of Civil Engineering, Sarajevo, 1982.
Milos Kojic, A General Concept of Implicit Integration of Constitutive Relations
for Inelastic Material Deformation, (monograph), Center for Scientific Research
of Serbian Academy of Sciences and Art and University of Kragujevac,
Kragujevac, 1993.
Milos Kojic, Computational Procedures in Inelastic Analysis of Solids and
Structures, (in English), Center for Scientific Research of Serbian Academy of
Sciences and Art and University of Kragujevac, Kragujevac, 1997.
Milos Kojic and K. J. Bathe, Inelastic Analysis of Solids and Structures, Springer
Verlag, 2005.
Textbook for graduate studies in bioengineering
M. Kojic, N. Filipovic, B. Stojanovic, N. Kojic, Computer Modelling in
Bioengineering – Theory, Examples and Software, J. Wiley and Sons, 2008.
b) Journal Papers
Computational methods for engineering problems
M. Kojic, J. B. Cheatham, Jr., Theory of plasticity of porous media with fluid
flow, Society of Petroleum Engineers Journal, pp. 263- 270, 1974.
M. Kojic, J. B. Cheatham, Jr., Analysis of the influence of fluid flow on the
plasticity of porous rock under an axially symmetric punch, Society of Petroleum
Engineers Journal, pp. 271-278, 1974.
M. Kojic, J. B. Cheatham, Jr., Influence of fluid flow around a dam on the
bearing capacity of the foundation, ZAMM, Vol 56, T44-45, 1976.
M. Kojic and J. B. Cheatham, Jr., Influence of gravity force on the indentation of
a Coulomb plasticity by a wedge, Theoretical and Appl. Mech. (Yugoslavian),
No. 2, 1976.
M. Kojic, Z. Petronijevic, V. Manojlovic, Influence of car body constructive
parameters on acoustic characteristics of car cavity, Int. J. of Vehicle Design, Vol.
5, No. 6, 1984.
M. Kojic, K. J. Bathe, The "effective stress-function" algorithm for thermo-elastoplasticity and creep, Int. J. Num. Meth., Engng., Vol. 24, pp. 1509-1532, 1987.
M. Kojic, K. J. Bathe, Thermo-elastic-plastic and creep analysis of shell
structures, Computers and Structures, Vol. 26, No. 1/2, pp. 135-143, 1987.
M. Kojic and K. J. Bathe, Studies of finite element procedures - stress solution at
a closed elastic strain path with stretching and shearing using updated Lagrangian
Jaumann formulation, Computers and Structures, Vol. 26, No. 1/2, pp. 175-179,
1987.
M. Kojic, Implicit stress integration for elastic-plastic deformation of von Mises
material with mixed hardening, Theoret. Appl. Mech. (Yugoslavian), Vol. 19, pp.
59-71,1993.
R. Slavkovic, M. Zivkovic, M. Kojic, Enhanced 8-node three-dimensional solid
and 4-node shell elements with incompatible displacements, Comm. Num. Meth.
Engng, Vol. 10, pp. 699-709, 1994.
M. Kojic, R. Slavkovic, N. Grujovic, M. Vukicevic, Imlicit stress integration
algorithm for the modified Cam-clay material, Theoret. Appl. Mech.
(Yugoslavian), Vol. 20, pp. 95-118, 1994.
M. Kojic, N. Grujovic, R. Slavkovic, A. Kojic, Solution procedure for elasticplastic orthotropic multilayered pipe deformation under internal and external
pressure, AIAA Journal, Vol. 34, No. 12, pp. 2354-2358, 1995.
M. Kojic, M. Zivkovic, A. Kojic, Elastic-plastic analysis of orthotropic
multilayered beam, Computers and Structures, Vol. 57, No. 2, pp. 205-211, 1995.
M. Zivkovic, M. Kojic, R. Slavkovic and N. Grujovic, A beam
superelement with deformable cross-section for geometrically nonlinear analysis,
in P. S. Theocaris and E. E. Gdoutos (Eds.): Proc. 4th National Congress on
Mechanics, Xanthi, Greece, pp. 453-464, 1995.
M. Kojic, N. Grujovic, R. Slavkovic, M. Zivkovic, A general orthotropic von
Mises plasticity material model with mixed hardening - model definition and
implicit stress integration procedure, Transactions of ASME J. Applied
Mechanics, Vol. 63, pp. 376-382, 1996.
M. Kojic, The governing parameter method for implicit integration of
viscoplastic constitutive relations for
isotropic and orthotropic metals,
Computational Mechanics, Vol. 19, No. 1, pp. 49-57, 1996.
M. Kojic, N. Filipovic, S. Mijailovic, A general formulation for finite element
analysis of flow through a porous deformable medium, Theoretical and Applied
Mechanics (Yugoslavian), Vol. 23, pp. 67-81, 1997.
M. Kojic, N. Filipovic, S. Vulovic, S. Mijailovic, A finite element solution
procedure for porous medium with fluid flow and electromechanical coupling,
Comm. Num. Meth. Engng, Vol. 14, pp. 381-392, 1998.
M. Zivkovic, M. Kojic, R. Slavkovic, N. Grujovic, A general beam finite element
with deformable cross-section, Comp. Meth. Appl. Mech. Engng., Vol. 190, pp.
2651-2680, 2001.
M. Kojic, D. Obradovic, Z. Bogdanovic, Dynamic analysis of vehicle propulsion
group with nonlinear characteristics of supports and arbitrary motion of the car
body, Int. J. Vehicle Design, Vol. 26, pp. 523-540, 2001.
M. Kojic, I. Vlastelica, M. Zivkovic, Implicit stress integration procedure for
large strain deformation of Gurson model, Int. J. Num. Meth. Engng., Vol. 53, pp.
2701-2720, 2002.
M. Kojic, Stress integration procedures for inelastic material models within finite
element method, review paper, J. Appl. Mech. Reviews, Vol. 55, pp. 389-414,
2002.
M. Kojic, An extension of 3-D procedure to large strain analysis of shells, Comp.
Meth. Appl. Mech. Engng., Vol. 191, pp. 2447-2462, 2002.
M. Kojic, I. Vlastelica, M. Zivkovic, Implicit stress integration algorithm for
Gurson model in case of large strain shell deformation, Facta Universitatis (Nis),
Vol. 4, No. 16, pp. 85-99, 2004.
N. Filipovic, S. Mijailovic, A. Tsuda, M. Kojic, An implicit algorithm within the
arbitrary Lagrangian-Eurlerian formulation for solving incompressible fluid flow
with large boundary motions,Comp. Meth. Appl. Mech. Eng., 95, 6347-6361, 2006.
S. Haber, N. Filipovic, M. Kojic, A. Tsuda, Dissipative particle dynamics
simulation of flow generated by two rotating concentric cylinders. Part I:
Boundary conditions, Physical Review E, Vol. 74, 1-8, 2006.
M. Kojić, N. Filipović B. Stojanović, V. Ranković, M. Krstić , L. Otašević, M.
Ivanović, M. Nedeljković, M. Dimkić, M. Tričković, M. Pušić , Đ. BoreliZdravković, D. Đurić, Finite element modeling of underground water flow with
Ranney wells, Water Science & Technology: Water Supply, Vol 7, No 3, 41–50,
2007.
M. Kojic, N. Filipovic, A. Tsuda, A mesoscopic bridging scale method for fluids
and coupling dissipative particle dynamics with continuum finite element method,
Comp. Meth. Appl. Mech. Eng., 197, 821-833, 2008.
D. Rakić, M. Živković, R. Slavković, M. Kojić, Stress integration for the
Drucker-Prager material model without hardening using the incremental plasticity
theory, J. Serb. Soc. Comp. Mech., Vol. 2, No.1, 80-89, 2008.
I. Vlastelica, V. Isailović, T. Djukić, N. Filipović, M. Kojić, On accuracy of the
element-free Galerkin (EFG), method in modeling incompressible fluid flow, J.
Serb. Soc. Comp. Mech., Vol. 2, No.1, 90-99, 2008.
N. Filipović, D. Petrović, A. Jovanović, S. Jovanović, D. Balos, M. Kojić, DPD
simulation of self-healing process of nanocoating, J. Serb. Soc. Comp. Mech.,
Vol. 2, No.2, 42-50, 2008.
N. Filipovic,, S. Haber, M. Kojic, and A. Tsuda. Dissipative Particle Dynamics
Simulation of Flow Generated by Two Rotating Concentric Cylinders. Part II:
Lateral Dissipative and Random Forces. J. Phys. D: Appl. Phys. 41:035504, 2008.
N. Filipovic, M. Ivanovic, M. Kojic, A comparative numerical study between
dissipative particle dynamics (DPD) and smooth particle dynamics (SPH) when
applied to simple unsteady flows, Microfluidics and Nanofluidics, 1613-4982,
2008.
M. Kojic, On the application of discrete particle methods and their coupling to the
continuum based methods within a multiscale scheme, Monograph of Academy
for Nonlinear Sciences, Vol 2, 357-356, 2008.
M. Kojic, On the stress integration for nonlinear material models within the finite
element method, Bulletin CXLII de l'Académie serbe des sciences et des arts
Classe des sciences techniques 32, 47-82, 2010.
M. Kojic, I. Vlastelica, P. Decuzzi, V. T. Granik, M. Ferrari, A finite element
formulation for the doublet mechanics modeling of microstructural materials,
Comp. Meth. Appl. Mech. Engrg., 200, 1446–1454, 2011.
A. Ziemys, M. Kojic, M. Milosevic, N. Kojic, F. Hussain, M. Ferrari, A. Grattoni,
Hierarchical modeling of diffusive transport through nanochannels by coupling
molecular dynamics with finite element method, Journal of Computational
Physics, 230, 5722–5731, 2011.
N. Filipovic, M. Kojic, M. Ferrari, Dissipative particle dynamics simulation of
circular and elliptical particles motion in 2D laminar shear flow, Journal of
Microfluidics and Nanofluidics, 1127-1134, 2011.
M.Kojic, I. Vlastelica, P. Decuzzi, F. Gentile, M. Ferrari, A Microstructural
Doublet Mechanics Finite Element Formulation, Monograph of South Slavic
Academy for Nonlinear Sciences, Vol 3, 2011.
N. Filipovic, M. Kojic, M. Ferrari, Dissipative particle dynamics simulation of
circular and elliptical particles motion in 2D laminar shear flow, Journal of
Microfluidics and Nanofluidics, 1127-1134, 2011.
N. Filipovic, V. Isailovic, T. Djukic, M. Ferrari and M. Kojic, Multi-scale
modeling of circular and elliptical particles in laminar shear flow, IEEE Trans
Biomed Eng., 59 (1):50-53, 2012.
A. Ziemys, M. Kojic, M. Milosevic, M. Ferrari, Interfacial effects on
nanoconfined diffusive mass transport regimes, Physical Review Letters, in press.
Bioengineering Problems
M. Kojic, S. Mijailovic, N. Zdravkovic, A numerical algorithm for stress
integration of a fiber-fiber kinetics model with Coulomb friction for connective
tissue, Computational Mechanics, Vol. 21, No. 2, pp. 189-198, 1998.
M. Kojic, S. Mijailovic, N. Zdravkovic, Modelling of muscle behavior by the
finite element method using Hill's three-element model, Int. J. Num. Meth.
Engng., Vol. 43, pp. 941-953, 1998.
S. Radlović, M. Kojić, Z. Petrović, I. Vlastelica, B. Stojanović, Finite element
method application in implantology, Stom. Glasnik (Serbian), Vol. 45, 137-140,
1998.
M. Kojic, N. Filipovic, S. Mijailovic, A large strain finite element analysis of
cartilage deformation with electrokinetic coupling, Comp. Meth. Appl. Mech.
Engng., Vol. 190, pp. 2447-2464, 2001.
S. Mijailovich, M. Kojic, M. Zivkovic, B. Fabry, J. Fredberg, A finite elеment
model of cell deformation during magnetic bead twisting, J. Appl. Physiol., Vol.
93, pp. 1429-1436, 2002.
M. Kojic, N. Zdravkovic, S. Mijailovic, A numerical stress calculation procedure
for a fiber-fiber kinetics model with Coulomb and viscous friction of connective
tissue, Computational Mechanics, Vol. 30, pp. 185-195, 2003.
N. Filipović, M. Kojić, Computer simulations of blood flow with mass transport
through the carotid artery bifurcation, Theoret. Appl. Mech. (Serbian), Vol. 31,
No. 1, pp. 1-33, 2004.
M. Kojic, A. Tsuda, Gravitational deposition of aerosols from oscillatory laminar
pipe flows, J. Aerosol Science, Vol. 35, pp. 245-261, 2004.
N. Kojic, M. Kojic, S. Gudlavalleti, G. McKinley, Solvent removal during
synthetic and Nephila fiber spinning, Biomacromolecules, Vol. 5, No. 5, 16981707, 2004.
C. Y. Tang, B. Stojanovic, C. P. Tsui, M. Kojic, Modeling of muscle fatigue using
Hill's model, Bio-Medical Materials and Engng., Vol. 15, No. 5, 2005.
N. Kojic, M. Kojic, D. Tschumperlin, Computational modeling of extracellular
mechanotransduction, Biophysical Journal, Vol 90, 4,Issue 11, 4261-4270, 2006.
N. Kojic, A. Kojic, M. Kojic, Numerical determination of the solvent diffusion
coefficient in a concentrated polymer solution, Comm. Num. Meth. Eng., Vol. 22,
1003-1013, 2006.
M. Kojic, I. Vlastelica, B. Stojanovic, V. Rankovic, A. Tsuda, Stress integration
procedures for a biaxial isotropic material model of biological membranes and for
hysteretic models of muscle fibers and surfactant, Int. J. Num. Meth. Engng., Vol
68, 893-909, 2006.
B. Stojanovic, M. Kojic, M. Rosic, C.P. Tsui, C.Y. Tang, An extension of Hill’s
three-component model to include different fiber types in finite element
modelling of muscle, Int. J. Num. Meth. Eng., 71, 801-817, 2007.
CY Tang, CP Tsui, B Stojanovic, M Kojic. Finite element modelling of skeletal
muscles coupled with fatigue, Int. J. Mech. Sciences, 49, 1179-1191, 2007.
B. Stojanović, M. Kojić, Modeling of musculoskeletal systems using finite
element method, J. Serb. Soc. Comp. Mech., Vol. 1, 110-119, 2007.
V. Ranković, B. Ristić, M. Kojić, Internal fixation of femoral bone comminuted
fracture - FE Analysis, J. Serb. Soc. Comp. Mech., Vol. 1, 120-128, 2007.
I. Vlastelica, D. Veljković, V. Ranković, B. Stojanović, M. Rosić, M. Kojić,
Modeling of urinary bladder deformation within passive and active regimes, J.
Serb. Soc. Comp. Mech., Vol. 1, 129-134, 2007.
M. Kojić, V. Isailović, B. Stojanović, N. Filipović, Modeling of cell mechanical
response by biphasic models with activation, J. Serb. Soc. Comp. Mech., Vol. 1,
135-143, 2007.
N. Filipovic, D. Ravnic, M. Kojic, S.J. Mentzer, S. Haber, A. Tsuda, Interactions
of blood cell constituents: Experimental investigation and computatonal modeling
by discrete particle dynamics algorithm, Microvascular Research, 75, 279-284,
2008.
D. Stamenović, M. Kojić, B. Stojanović, D. Hunter, A finite element analysis of
an osteoarthritis knee brace, J. Serb. Soc. Comp. Mech., Vol. 2, No.2, 29-41,
2008.
O. Miljković, M. Ivanović, N. Filipović, M. Kojić, AI models of the
hemodynamic simulation, J. Serb. Soc. Comp. Mech., Vol. 2, No.2, 59-72, 2008.
M. Rosic, S. Pantovic, V. Rankovic, Z. Obradovic, N. Filipovic, M. Kojic,
Evaluation of dynamic response and biomechanical properties of isolated blood
vessels, J. Biochem. Biophys. Methods, 70, 966-972, 2008.
N. Filipovic, M. Kojic, A. Tsuda, Modeling of thrombosis using dissipative
particle method, Phylosoph. Trans. Roy. Soc. London, A 366(1879), 2008.
D Stamenović, M. Kojić, B. Stojanović,D. Hunter, Pneumatic osteoarthritis knee
brace, J. Biomech. Engng, Transactions ASME, Vol. 131, 045001-1,6, 2009.
N. Filipovic, A. Cvetkovic, V. Isailovic, Z. Matovic, M. Rosic, M. Kojic,
Computer simulation of flow and mixing at the duodenal stump after gastric
resection, World Journal of Gastroenterology, ISSN 1007-9327,{wjg.wjgnet.com/
doi:10.3748/wjg.15.0000}, 2009.
S. Mijailovich, M. Kojic, A. Tsuda, Particle-induced indentation of the alveolar
epithelium caused by surface tension forces, Journal of Applied Physiology, 109:
1179–1194, 2010.
D. Fine, A. Grattoni, S, Hosali, A. Ziemys, E. De Rosa, J. Gill, R. Medema,
L. Hudson, M. Kojic, M. Milosevic, L. Brousseau III, R, Goodall, M. Ferrari,
X. Liu, A robust nanofluidic membrane with tunable zero-order release for
implantable dose specific drug delivery,
Lab on a Chip,
DOI:
10.1039/c0lc00013b, 2010.
R. J. Gilbert, B. Stojanovic, M. Kojic, A. Liang., T. T. Wang., T. A. Gaige., T.
Benner., R. Wang., V. J. Wedeen, S. M. Mijailovich, Finite element model of
human lingual tissue deformation during swallowing based on the mechanics of
mesoscale myofiber tracts obtained by diffusion tensor MR imaging with
tractography, Journal of Applied Physiology, 109, 1500–1514, 2010.
N. Kojić , A. Huang, E. Chung, M. Ivanović, N. Filipović, M. Kojić , D. J.
Tschumperlin, A 3-D model of ligand transport in a deforming extracellular
space, Biophysical Journal, 99, 3517–3525, 2010.
D. Veljković, M. Kojić, Prediction of planar uniaxial and constrained biaxial state
of deformation by commonly used anisotropic constitutive models in arterial
mechanics, J. Serbian Society for Computational Mechanics, Vol. 4, No. 2, 54-74,
2010.
Filipovic N., M. Ivanovic, D. Krstajic and M.Kojic, Hemodynamic Flow
Modeling through an Abdominal Aorta Aneurysm Using Data Mining Tools,
IEEE - Transactions on Information Technology in Biomedicine, B 15, 189-194,
2011.
M. Kojic, M. Milosevic, N. Kojic, M. Ferrari, A. Ziemys, On diffusion in
nanospace, J. Serbian Soc. Comp. Mechanics, Vol. 5, No. 1, 84-109, 2011.
M. Kojic, A. Ziemys, M. Milosevic, V. Isailovic, N. Kojic, M. Rosic, N.
Filipovic, M. Ferrari, Transport in biological systems, J. Serbian Soc. Comp.
Mechanics, Vol. 5, No. 2, 101-128, 2011.
Filipovic N., M. Ivanovic, D. Krstajic and M.Kojic, Hemodynamic Flow
Modeling through an Abdominal Aorta Aneurysm Using Data Mining Tools,
IEEE - Transactions on Information Technology in Biomedicine, B 15, 189-194,
2011.
N.Filipovic, M.Rosic, V.Isailovic, Z.Milosevic, D.Nikolic, D.Milasinovic,
M.Radovic, B.Stojanovic, M.Ivanovic, I.Tanaskovic, I.Saveljic, M.Milosevic,
D.Petrovic, M.Obradovic, E.Themis, A.Sakellarios, P.Siogkas, P.Marraccini,
F.Vozzi, N.Meunier, Z.Teng, D.Fotiadis, O.Parodi, M.Kojic, ARTREAT project:
computer, experimental and clinical analysis of three-dimensional plaque
formation and progression in arteries; Journal of the Serbian Society for
Computational Mechanics, Vol. 5 No. 2, 129-146, 2011.
M. Kojic, J. P. Butler, I. Vlastelica, B. Stojanovic, V. Rankovic, A. Tsuda,
Geometric hysteresis of alveolated ductal architecture, ASME J. Biomechanics,
Vol. 133 / 111005-1- 11, 2011.
D. Veljkovic, N. Filipovic, M. Kojic, The effect of axial asymmetry and
prestraining on the amplitude of mechanical stress in abdominal aorta aneurysm,
Journal of Mechanics in Medicine and Biology Vol. 12, No. 5, 2012.
N. Kojic, M.J. Panzer, G. G. Leisk, W.K. Raja, M. Kojic, D. L. Kaplan, Ion
Electrodiffusion Governs Silk Electrogelation, Soft Matters, in press