Office- Fax-216-266-0291
Material Safety Data Sheet (MSDS)
PRODUCT NAME: NuBricity H2O Cutter
SECTION 1: Product and Company Identification
Product:
Product Description:
Product Code:
Intended Use:
NuBricity H20 Cutter
Water based Synthetic Cutting Fluid and Coolant
NA
Industrial Cutting Fluid
08-25-2014
DCS Solutions, LLC
5400 Brookpark Road Unit #B
Revision date:
Company Identification:
Cleveland, Ohio 44129
(216) 245-8087
SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient
Boric Acid Granular
Monoethanolamine
Triethanolamine
Surfactant
Surfactant
Mea Borate
CAS Number
141-43-5
10043-35-3
9003-11-6
mixture
26038-87-9
OSHA PEL
3ppm
Not Estab.
Not Estab.
Not Estab.
Not Estab.
ACGIH TLV
6ppm
Not Estab
Not Estab.
Not Estab.
Not Estab.
.
The Specific Chemical names and composition of the components not disclosed is confidential
business information and is withheld as permitted by 29CFR 1910. 1200,
and various state right to know laws. Product does contain 6% or less NuBricity Pro NonChlorinated Metal Conditioner which is 100% non-Hazardous.
SECTION 3: Hazard Identification
Potential Health Effects:
Emergency Overview: N/A
Excessive exposure may result in eye, skin, or respiratory irritation.
Low order of Toxicity. High-pressure injection under skin may cause serious damage.
Medical Condition Aggravated: None Known
Chronic health hazard: None Known
NFPA Rating: Flammability: 0, Reactivity: 0, Health: 1
HMIS Rating: Flammability: 0, Reactivity: 0, Health: 1
Carcinogenicity: OSHA: No ACGIH: No NTP: No IARC: No Other: N/A
Note: This material should not be used for any other purpose than the intended use listed in
Section 1 without expert advice. Health studies have shown that chemical exposure may cause
potential human health risks, which may vary from person to person.
SECTION 4: FIRST AID MEASURES
EYE CONTACT: Immediately flush with large quanities of cool water for at least 15 minutes. Get
medical attention.
SKIN CONTACT: Was off with soap and water for 15 minutes.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Get medical
attention:
INGESTION: Do NOT induce vomiting. Get medical attention.
NOTE TO PHYSICIAN:
None
SECTION 5: FIRE AND EXPLOSION DATA
EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Water Spray (fog), dry chemical, foam, halon, or carbon
dioxide.
Inappropriate Extinguishing Media: Water steam may splash burning liquid and spread fire.
FIRE FIGHTING
Fire Fighting Procedures: Evacuate area. Prevent runoff from fire control or dilution from
entering streams, sewers or drinking water supply. Fire fighters should use self-contained
breathing apparatus NIOSH with full face piece operated in a positive pressure demand mode
with full body protection (SCBA) to fight fires. Use water spray to cool fire-exposed surfaces and
to protect personnel.
Hazardous Combustion Products: Smoke, Fume, Sulfur oxides, oxides of carbon, nitrogen.
FLAMABLE PROPERTIES
Flashpoint: Not tested
Flammable Limits (Approximate volume % in Air):
LEL: NA UEL: NA
Auto-ignition Temperature: NA
SECTION 6: ACCIDENTAL RELEASE MEASURES
NOTIFICATION PROCEDURE
Contain any spills with absorbents to prevent migrations and entry into sewers or streams. Take
up small spills with dry chemical absorbent. Large spills may be taken up with pump or vacuum
and finished off with dry chemical absorbent. May require excavation of contaminated soil.
SPILL MANAGEMENT
Land Spill: Contain any spills with absorbents to prevent migrations and entry into sewers or
streams. Take up small spills with dry chemical absorbent. Large spills may be taken up with
pump or vacuum and finished off with dry chemical absorbent. May require excavation of
contaminated soil.
Water Spill: Confine the spill immediately with booms. Stop leak, if you can do so without
risking personal safety. Report spills as required to appropriate authorities. Remove from the
surface by skimming or with suitable absorbents.
ENVIRONMENTAL PRECAUTIONS
Large spills should be diked for later recovery or disposal. Spills may be taken up with pump or
vacuum and finished off with dry chemical absorbent. May require excavation of contaminated
soil. To the best of DCS Solutions, knowledge, this product is not regulated for the toxicity
characteristic via the Toxicity Characteristic Leaching Procedure. Therefore, it may be disposed
of as an industrial waste in a manner acceptable to good waste management practice and in
compliance with applicable local, state and federal regulations.
SECTION 7: HANDLING AND STORAGE
HANDLING
Avoid contact with skin. Prevent spills and leaks to avoid slipping hazard.
STORAGE
Keep containers sealed until ready to use. Avoid excessive long-term storage temperature to
prolong shelf life. Maximum storage temperature: 120F. Store in well ventilated areas. Keep out
of reach of children and do not store near food, drink, or animal food.
SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION INFORMATION
ENGINEERING CONTROLS
The level of protection and types of control necessary will vary depending upon potential
exposure conditions. Under normal conditions, no special control required when used in a wellventilated area with local exhaust ventilation.
PERSONAL PROTECTION
Personal protective equipment selections vary based on potential exposure conditions such as
applications, handling practices, concentration and ventilation. Information on the selection of
protective equipment for use with this material, as provided below, is based upon intended,
normal usage.
Respiratory Protection: None required in normal use. Use only NIOSH/MSHA Organic vapor
approved equipment if necessary.
Hand Protection: Chemical resistant gloves are recommended. No Protection is required in
normal use.
Eye Protection: Goggles or safety glasses with side shields are recommended.
Skin and Body Protection: Chemical / oil resistant clothing if contact with material is likely. NO
skin protection is ordinarily required under normal conditions of use.
Special Hygiene Measures: Practice good personal hygiene. Wash hands thoroughly after use
and handling.
ENVIRONMENTAL CONTROLS
See Section 6, 7, 12, 13.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Typical physical and chemical properties are given below. Consult the Supplier in Section 1 for
additional data.
GENERAL INFORMATION
Physical State: Liquid
Color: Blue Color
Odor: Characteristic Odor
Odor Threshold: None
IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION
Relative Density (at 15 C): 0.89
Flashpoint: None
Flammable Limits (Approximate volume % in Air): LEL: NA UEL: NA
Auto ignition Temperature: NA
Boiling Point / Range: 212 F (100 C)
Freezing Point: Not tested
Vapor Density (Air = 1): > 1mm
Vapor Pressure, mmHG: > 760
Evaporation Rate: < 1
Specific Gravity (H20=1) 1.040
PH: 10.25
Solubility in Water: 100%
Volatility Including water (%): 96.8%
Volatility Organic Compounds (VOC): 0%
SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable under normal temperatures and pressures
CONDITIONS TO AVOID: None Known
Incompatibility: Strong acids, strong oxidizing agents
Hazardous Decomposition Products: Oxides of Carbon and Nitrogen
Hazardous Polymerization: Does not occur.
SECTION 11: TOXICOLOGICAL INFORMATION
Surfactant (9003-11-6) LD50 (Rat, Oral) 237.5mg/kg
SECTION 12: ECOLOGICAL INFORMATION
Surfactant (9003-11-6) LC50 467mg/L 96hr estimate
Monoethanolamine (141-43-5) LC50 (daphnia, 96hrs) 140 mg/L
Triethanolamine (102-71-6) LC50 (Fish, 96hr) 11800 mg/L
SECTION 13: DISPOSAL INFORMATION
Disposal recommendations based on material as supplied. Therefore, it may be disposed of as
an industrial waste in a manner acceptable to good waste management practice and in
compliance with applicable local, state, and federal regulations.
DISPOSAL RECOMMENDATIONS
Product is suitable for burning in an enclosed controlled burner for fuel valve or disposal by
supervised incineration at very high temperatures to prevent formation of undesirable
combustion products.
REGULATORY DISPOSAL INFORMATION
To the best of Royal Manufacturing Company, LP knowledge, this product is not regulated by
CERCLA/RCRA as a hazardous waste or material. However, this product has not been tested for
the toxicity characteristic via the Toxicity Characteristic Leaching Procedure.
Empty Container Warning: Do not attempt to refill or clean containers since residue is difficult
to remove. Empty drums should be completely drained, properly bunged and returned to a
drum re-conditioner. All containers should be disposed of in an environmentally safe manner
and in accordance with governmental regulations.
SECTION 14: TRANSPORT INFORMATION
PROPER SHIPPING NAME: Liquid Coolant, N.O.S.
PACKAGING GROUP: None
AIR SHIPMENT
PROPER SHIPPING NAME: Liquid Coolant N.O.S.
SHIPPING BY WATER:
VESSEL (IMO/IMDG)
PROPER SHIPPING NAME: Liquid Coolant N.O.S.
SECTION 15: REGULATORY INFORMATION
TSCA STATUS: All Chemicals are listed or exempt
CERCLA: None
SARA 311/312: None
SARA 313 REPORTABLE INGREDIENTS:
None
STATE REGULATIONS: California Proposition 65: None
NFPA HEALTH:
NFPA FLAMMABILITY:
NFPA REACTIVITY:
NFPA OTHER:
1
0
0
None
HMIS HEALTH:
HMIS FLAMMABILITY:
HMIS REACTIVITY:
HMIS PROTECTION
1
0
0
A
SECTION 16: EMERGENCY CONTACT INFORMATION
EMERGENCY EMAIL: safety@nubricity.com
EMERGENCY PHONE: 216-245-8087
DISCLAIMER: To the best of our knowledge, information contained is accurate. However there
is no assumption of liability for the accuracy or completeness of the information contained
herein. Final determination of suitability of any material is the sole responsibility of the user.
Although certain hazards may be described herein we cannot guarantee that these are the only
hazard which exists. The information contained in this MSDS was obtained from current and
reliable sources; however, the data is provided without any warranty, expressed or implied,
regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of
this product are beyond the control of the manufacturer, the manufacturer will not be
responsible for loss, injury, or expense arising out of the products use. No warranty, expressed
or inferred, regarding this product described in this MSDS shall be created or inferred by any
statement in this MSDS. Various government agencies may have specific regulations regarding
the transportation, handling, storage, use, or disposal of this product which may not be covered
by this MSDS. The user is responsible for full compliance.