Levy Residence
3535 N. Paulina
Chicago, IL 60657
RE: Scope of Work
Electrical
□ Reuse (10) existing recessed cans. Relocate per new kitchen layout. Patch as required. Provide an
independent switch with dimmer option. Confirm locations with designer during electrical walkthrough
prior to finishing ceiling.
□ Provide and install (1) gimbel recessed can near stair zone to highlight art wall East of the banquette.
Recessed can to coordinate in fixture type as the other existing (10) existing recessed cans. Switch on
same electrical circuit as the other existing cans.
□ Provide and install (1) recessed can to match the existing cans above desk zone. This can will have an
independent switch on adjacent switch panel.
□ New Ceiling Pendant over banquette (B.O.). Provide new "J" Box and independent dimmer switch.
Verify new location with existing electrical layout. Set height of pendant with designer on site.
□ New (3) Ceiling Pendants over kitchen island (B.O.). Provide new "J" Box and independent dimmer
switch. Verify new location with existing electrical layout. Remove existing (2) pendants. Patch as
required. Set height of pendants with designer on site.
□ Move existing electrical switch panel (near Living Room) to accommodate for new plan/layout. Add
an additional main electrical switch panel adjacent stair zone to Family Room.
□ Remove existing switch and outlet above the existing desk zone. Not required anymore.
□ Remove switch near pantry that operates the Family Room sconces. Kill both Family Room sconce
locations. Not required anymore.
□ Remove existing wall sconce in pantry and interior switch. Not required anymore.
□ Provide new quad outlet and data/phone under desk zone for computer, new phone, etc.
□ Provide and install (3) stainless steel puck lights in food pantry (B.O.). Use and extend the existing
electrical feed that is that same location and place switch in the interior of the cabinet. Remove existing
wall outlet in this location.
□ Provide new outlet for microwave above counter height on West elevation.
□ Client would now only like (1) duplex outlet on South Backsplash under the East solid cabinet adjacent
to East window to the left of stove. Finish with a new stainless steel cover plate. Remove existing quad
outlet under East window. Remove (2) existing duplex outlets near West window. Relocate existing
outlet only (in what will be the closed garage style storage cabinet for toaster/blender, etc.) slightly
over to be positioned center within the interior cabinet.
□ Provide and install new LED under cabinet lighting. See lighting product in lighting specs. Provide
switch adjacent outlet in backsplash.
□ Provide and install (1) Air switch on the counter top surface to operate the garbage disposal at the
new main porcelain kitchen sink.
□ Provide and install (1) Air Switch on the counter top surface to operate the garbage disposal at the
veggie sink zone at the kitchen island.
□ Provide and install (1) duplex outlet with a stainless steel cover plate on main sink elevation.
□ Existing Crestron system to remain on the South elevation. Millworker to provide cutout in cabinet for
possible future access.
□ Provide and install (1) duplex outlet in kitchen island open cabinet.
□ Replace(4) existing sconces at main stair with new sconces (B.O.) Use same location.
□ Powder Room: Replace (1) existing wall sconce with new (B.O.). Replace (1) existing ceiling fan (B.O.).
Use same location.
Plumbing
□ Main Sink (Rohl Porcelain Sink). Provide and install new plumbing line and main porcelain sink in new
location. Vent as required. Provide and install new garbage disposal, hot and cold water filter spout,
new industrial faucet, and soap pump, and Insinkerator Air switch in this location.
□ Veggie Sink. Provide sink and relocate new plumbing line per new layout/plan. Vent as required.
Provide and install new Grohe faucet, garbage disposal, and Insinkerator Air switch . Note: Client would
like a custom cutting board/veggie sink detail in this zone. Designer will provide a detailed sketch for
this Option #2. Price out as a standard veggie sink installation per the rohl cut sheet.
□ Provide new water line to new dishwasher in the kitchen island and to client's relocated Fisher and
Paykel dish drawers on East elevation.
□ Powder Room: Remove and protect existing vanity to be donated. Replace with new cantilevered
vanity (B.O.). Install new faucet.
Carpentry/Drywall
□ Build up and extend kitchen approx 2'-9" East.
□ Provide new partial height drywall partition between desk zone and banquette seating. Provide a
number for the star fire glass panel + recessed ss gasket channel. Client may or may not want they glass
portion as they are concerned of it closing off the desk zone but still want light in this zone - undecided
for the moment - but please provide a line item number to provide and install.
□ Powder Room: Patch drywall on the toilet wall elevation.
□ Remove existing wing wall wrapping the side of the refrigerator. Coordinate with the millworker.
□ Family Room: Remove and protect existing mill work to the
□ Provide new stair base near family room
□ relocated floor vent to riser of bottom step.
□ Remove and reuse crown moulding from South elevation to be used on North elevation.
□ Match existing base trim where needed.
□ Widen dining room to kitchen opening a few inches since the drywall portion will be coming down.
□Remove existing floor tile. Provide new duroc + acoustic subfloor base for floor and basic wall prep for
wall tile. Tile installation by others.
Hardwood Flooring
□ Sand and re-stain existing hardwood flooring. Areas to include: Family Room, New stair treads, Living
Room/Dining Area, Closets, Powder Room, Stair Treads from 1st to 2nd floor. Use water based products
with a satin finish coat.
□ Provide and install new hardwood flooring to match existing in 2nd floor hallway. Includes 2 hallway
linen pantries. No short run planks.
□ New stair rail (B.O.). Patch around new posts as required. Coordinate with stair rail installer.
General Notes:
□ The thermostat will need to be relocated. It currently resides in the existing pantry interior. Relocate
adjacent East switch panel. It is currently tied to the client's existing Crestron system but they operate it
solely from the actual thermostat panel versus the Crestron panel.
□ Remove and protect Family Room Millwork to be donated for reuse. Cable and outlet to remain.
Patch if necessary.
□ Remove and protect Kitchen Millwork to be donated for reuse.
□ Demo existing kitchen pantry.
□ All kitchen appliances to be reused. Carefully remove and protect on-site for reuse and installation
later. Appliances to include: Wine REF, REF, Double dishwasher drawers, Stove, Microwave.
□ Provide plastic zipper visqueen barrier between kitchen and dining area sealing off the work zone
from the remainder of the house.
□ Painting by others.
□ Millwork by others.
□ Tile and tile installation by others. Provide sub base for all.
□ Countertops by others.