category
sensors
Family
Ultrasonic
sensors
Name
Model
US4000 level
sensor
Applications
Non-contact
level sensor for
solids and
liquids
sensors
Pressure
sensors
Model
5000MP
submersible
level sensor
Level sensing in
commercial and
municipal water
wells where
space is limited
Specifications
Ranges: 1.7 inches
to 14 feet
10 inches to 30 feet
Measurement rate:
40 per second.
Response Time:
50 mSec to 2
inches/second
(slow)
Resolution:
0.003384 inch
Repeatability:
0.1% target range
@ constant temp.
Temperature range:
-40° to 70°C.
Humidity range: 0
to 100 percent
(condensation may
affect readings)
Weight: 18 oz.
Dual outputs: 4/20
mA standard and
0-5/0-10 vDC
optional
Must be mounted
vertically in respect
to material being
measured.
Thermal Limits
Max. operating:
-40°C/120°C (40°F/248°F)
Compensated:
0°C/50°C
(32°F/122°F)
Features
Fully programmable for
zero and span points,
response time, output
Type, and
measurement rate.
30 mm (60 mm, 30-ft.
range) IP68 sealed
waterproof
body
Constructed of 303
Series
stainless steel
Threaded for
easy mounting
NEMA 4 junction box
provided for conduit
mounting and user
access to
programming
adjustments
Lock feature prevents
accidental and
unauthorized
reprogramming.
Description
Sensor uses
ultrasonic signal
to determine
distance to solid
or liquid level
being measured.
Active temperature
compensation
4/20 mA two-wire
output standard, RS485
MODBUS output
optional
Digital data
Submersible
pressure sensor
transmits depth
of water above.
Standard ranges:
0-30 psi (0-70 ft.
H2O)
Temperature
effects: + 0.25%
output span within
compensated range
Accuracy: = + 0.1%
Input/Output:
15-45 vDC/4-20
mADC/digital
Electrical
connection:
Attached four-wire
20-gauge directburial polyurethane
jacketed shielded
cable
Weight: (without
cable)
8 oz.
Sensors
(accessory)
sensor output
Meter for
model
5000MP
pressure
sensor
transmission enables
daisy-chain linking of
up to 128
sensors over a distance
of up to 4,000 feet.
Submersible cable of
20-gauge, direct-burial
polyurethane jacket
shielded, available in
unspliced lengths up
to 2,000 feet.
High-integrity
waterproof
seal at cable entrance to
body protects internal
electronics.
Solid-state piezoresistive sensing
element enclosed in
0.69” diameter 316
stainless steel body,
isolated from process
media with a 316
stainless steel
diaphragm.
Microprocessorcontrolled
Graphic LCD display
5 function keys
20-point linearization
Isolated 24 vDC sensor
power
4-20 mA, 1-5 v, 0-5 v,
0-10 vDC input
1 analog input
1 analog output
2 digital outputs,
0-50 psi (0-115
ft. H2O)
0-100 psi (0-230
ft. H2O)
0-150 psi (0-400
ft. H2O)
0-300 psi (0600 ft. H2O)
Other ranges
optional
Sensors
Pressure
sensors
Model
6000MP
submersible
level sensor
Level
monitoring in
wells, ponds,
dams, cooling
towers,
reservoirs,
ground water,
tidal areas,
tanks, and
standpipes
Diameter: 1.25
inches
Thermal Limits
Max. operating:
-40°C/85°C (40°F/185°F)
Compensated:
0°C/50°C
(32°F/122°F)
Temperature
effects: + 0.25%
output span within
compensated range
Accuracy: = + 0.1%
Input/Output:
7.8-36 vDC/4-20
mADC/digital
Electrical
connection:
Attached four-wire
20-gauge directburial polyurethane
jacketed shielded
cable
Process connection:
Protective nose
cone for
submergence in
liquids. Removing
nose cone provides
½-inch NPT (F)
connection.
optically isolated
Fully user
programmable in
English
Pop-up alarm screens
Analog/digital output
Ultra stable, high
99.8% accuracy
316 stainless steel
construction
Active temperature
compensation
Integral surge
protection
No breather tubes or
desiccants necessary
Fully repairable
4-20 mA and RS485
MODBUS outputs
Field calibrateable
Digital data
transmission enables
daisy-chain linking of
up to 256 sensors over
a distance of up to
4,000 feet.
MODBUS digital
output enables direct
connection between
transmitter and spreadspectrum radio modem
for long-distance
transmission of level
signals without the
need for remote
telemetry
Submersible
pressure sensor
transmits depth
of water above.
Standard ranges:
0-3 psi (0-7 ft.
H2O)
0-5 psi (0-12 ft.
H2O)
0-10 psi (0-23 ft.
H2O)
0-15 psi (0-35 ft.
H2O)
0-50 psi (0-115
ft. H2O)
0-100 psi (0-230
ft. H2O)
0-300 psi (0600 ft. H2O)
Other ranges
optional
With a state-ofthe-art piezoresistive sensor
and active
temperaturecompensated
microprocessor,
the 6000MP is
significantly
more accurate
and stable than
Sensors
Pressure
sensors
Model
6100MP
submersible
level sensor
Sludge and
sewage
Materials: 316
stainless steel body
and diaphragm,
BUNA N o-ring,
neoprene grommet,
polyurethane
jacketed cable.
Weight: (without
cable)
8 oz.
Thermal Limits:
Max. operating:
-40°C/85°C (40°F/185°F)
Compensated:
O°C/50°C
(32°F/122°F)
Temperature
effects:
+0.2% output span
within
compensated range
Accuracy:
+0.2% of span
Input:
7.8 –36 vDC
Output: 4/20 mA
and MODBUS
Electrical
Connection:
Attached two-wire
submersible
polyurethane
jacketed cable
Materials:
316 stainless steel
body and clamp
analog designs.
Continuous Output
Non-fouling flush
diaphragm design
316 stainless steel
construction
Teflon, 316 stainless
steel, and Viton
diaphragms
Microprocessor-based
electronics
Ultra Ssable, high
99.8% accuracy
4/20 mA and RS485
MODBUS outputs
Ranges to 115 feet water
No desiccants or
breather tubes
necessary
Stand-off option
Fully repairable and
field calibrateable
Submersible cable is a
20-gauge, direct-burial
polyurethane-jacketed
and shielded cable
available in unspliced
lengths to 1,000 feet.
Mounted in a
fixed submerged
position, the
Model 6100MP
sensor
measures the
head pressure
imposed on the
diaphragm by
the liquid height
above.
Calibrated to the
specific gravity
of the process
fluid, the sensor
operates reliably
in still and
wastewater wet
wells, as well as
sludge and
process sumps,
tanks and
reservoirs.
The 6100MP
sensor is an
excellent choice
for measuring
stainless steel bolts,
convoluted molded
Viton diaphragm,
BUNA o-ring,
neoprene grommet
Can be either pipe or
cable suspended.
levels of dense
sludges, since it
provides reliable
data without the
complexity and
clogging often
associated with
other systems.
Composed of
a lower assembly
sensor,
submersible
cable, and
optional
meter/controller.
Integral
microprocessorbased electronics
provide active
temperature
compensation.
The
straightforward
design and
construction of
the 6100MP
sensor
suits it for water,
wastewater, and
process
applications
whenever an
analog or digital
signal is required
for pump
control,
indication,
alarm, or
telemetry
applications.
Standard ranges:
0-2 psi (0-5 ft.
H2O)
0-5 psi (0-12 ft.
H2O)
0-7 psi (0-16 ft.
H2O)
0-15 psi (0-35 ft.
H2O)
0-30 psi (0-70 ft.
H2O)
0-50 psi (0-115
ft. H2O)
Other ranges
optional.
Sensors
Pressure
sensors
Model
6100MP/FM
submersible
flangemounted level
sensor
Sludge and
sewage
Thermal Limits:
Max. operating:
-40°C/85°C (40°F/185°F)
Compensated:
O°C/50°C
(32°F/122°F)
Temperature
effects:
+0.2% output span
within
compensated range
Accuracy:
+0.2% of span
Input:
7.8 –36 vDC
Output: 4/20 mA
and MODBUS
Continuous Output
Non-fouling flush
diaphragm design
316 stainless steel
construction
Teflon, 316 stainless
steel, and Viton
diaphragms
Microprocessor-based
electronics
Ultra Ssable, high
99.8% accuracy
4/20 mA and RS485
MODBUS outputs
Ranges to 115 feet water
No desiccants or
breather tubes
necessary
Flange-mounted
version of Model
6100MP
Sensors
Pressure
sensors
Model
6200MP
submersible
non-fouling
level sensor
Level control for
sludge and
sewage, clear
wet wells, and
sludge and
process sumps,
tanks, and
reservoirs.
Electrical
Connection:
Attached two-wire
submersible
polyurethane
jacketed cable
Materials:
316 stainless steel
body and clamp
stainless steel bolts,
convoluted molded
Viton diaphragm,
BUNA o-ring,
neoprene grommet
Thermal Limits:
Max. operating:
-40°C/85°C (40°F/185°F)
Compensated:
O°C/50°C
(32°F/122°F)
Temperature
effects:
+0.2% output span
within
compensated range
Accuracy:
+0.2% of span
Input:
7.8 –36 vDC
Output: 4/20 mA
and MODBUS.
Electrical
Connection:
Attached two-wire
submersible
polyurethane
Stand-off option
Fully repairable and
field calibrateable
Submersible cable is a
20-gauge, direct-burial
polyurethane-jacketed
and shielded cable
available in unspliced
lengths to 1,000 feet.
Can be either pipe or
tank-flange connected.
Continuous output
Non-fouling flush
diaphragm design
316 stainless steel
construction
Viton diaphragm
Microprocessor-based
electronics
Ultra stable, high
99.8% accuracy
4/20 mA and/or
MODBUS outputs
Ranges to 70 feet water
No desiccants or
breather tubes
necessary
Fully repairable and
field calibrateable.
Submersible cable is a
20-gauge, direct-burial
polyurethane-jacketed
and shielded cable
available in unspliced
Non-fouling
submersible level
sensor
Composed of
a lower assembly
sensor,
submersible
cable, and
optional
meter/controller.
Mounted in a
fixed submerged
position, the
Model 6200MP
sensor
measures the
head pressure
imposed on the
diaphragm by
the liquid height
above. Integral
microprocessorbased electronics
jacketed cable
Materials:
316 stainless steel
body and clamp
stainless steel bolts,
convoluted molded
Viton diaphragm,
BUNA o-ring,
neoprene grommet
lengths to 1,000 feet.
Can be either pipe
suspended (1/2-inch
NPT) or cable
suspended in a vertical
position.
provide active
temperature
compensation
and significantly
improved
performance,
while
offering 4/20
mA and
MODBUS
outputs.
Excellent choice
for measuring
levels of dense
sludges, as it
provides reliable
data without the
complexity and
clogging
associated with
other systems.
The
straightforward
design and
construction of
the 6200MP
sensor
suits it for water,
wastewater, and
process
applications
whenever an
analog or digital
signal is required
for pump
control,
indication,
Sensors
Pressure
sensors
Model
7000MP PVC
submersible
level sensor
Level
monitoring in
clear wells,
ponds, dams,
cooling towers,
reservoirs, and
chemical tanks
and drums.
Diameter: 1.25
inches
Thermal Limits:
Max. operating:
-40°C/85°C (40°F/185°F)
Compensated:
O°C/50°C
(32°F/122°F)
Temperature
effects:
+0.25% output
span within
compensated range
Accuracy:
+0.2% of span
Input:
7.8 –36 vDC
Output: 4/20 mA,
alarm, or
telemetry
applications.
Standard ranges:
0-2 psi (0-5 ft.
H2O)
0-5 psi (0-12 ft.
H2O)
0-7 psi (0-16 ft.
H2O)
0-15 psi (0-35 ft.
H2O)
0-30 psi (0-70 ft.
H2O)
0-50 psi (0-115
ft. H2O)
Other ranges
optional.
Analog/digital output
Nonmetallic
Ultra stable, high
submersible level
99.8% accuracy
sensor.
Nonmetallic PVC
Applicable in
construction
caustic
Active temperature
environments
compensation
that could
Integral surge
corrode metal.
protection
Sensor
4/20 mA and/or
measures the
MODBUS outputs
head pressure
No desiccants or
imposed on the
breather tubes
diaphragm by
necessary
the liquid height
Fully repairable and
above.
field calibrateable.
Standard ranges:
State -f the-art piezo0-2 psi (0-5 ft.
resistive media, isolated H2O)
sensor,
0-5 psi (0-12 ft.
Sensors
Pressure
sensors
Model
8000MP
submersible
stainless steel
level sensor
Level
monitoring in
clear wells,
ponds, dams,
cooling towers,
reservoirs, and
chemical tanks
and drums.
MVNET, and
RS485 MODBUS
Electrical
Connection:
Attached two-wire
submersible
polyurethane
jacketed cable
Process connection:
Protective nose
cone for
submergence in
liquids. Removing
nose cone provides
½-inch NPT (F)
connection.
Materials: PVC
body, Viton o-ring
and diaphragm,
polyurethanejacketed cable
Weight: 8 oz.
(without cable)
Compensated:
O°C/50°C
(32°F/122°F)
Temperature
effects:
+0.25% output
span within
compensated range
Accuracy: +0.1%
total errors
Input/Output:
15-45 vDC/4-20
mADC/digital
Electrical
active temperature
compensation, and
microprocessor-based
electronics.
Digital data
transmission enables
daisy-chain linking of
up to 256 sensors over
a distance of up to
4,000 feet.
MVNET protocol
digitally compatible
with all Myriad
monitors and control
devices, enabling direct
connection from
transmitter to spreadspectrum radio modem
for long-distance
transmission of level
signals without the
need for an RTU.
H2O)
0-7 psi (0-16 ft.
H2O)
0-15 psi (0-35 ft.
H2O)
0-30 psi (0-70 ft.
H2O)
0-50 psi (0-115
ft. H2O)
0-70 psi (0-160
ft. H2O)
Other ranges
optional.
All 316 stainless steel
construction with PVC
nose
Analog 4/20M mA
and/or digital output
(MODBUS)
Ranges up to 350
ft/WC Available
Heavy-wall
polyurethane cable
Integral transient and
surge protection
Up to 128 units on a
single cable
Totally
networkable and
compatible
with the Sigma
Myriad control
devices, the
Model
8000MP offers
the ultimate in
flexibility.
Unparalleled
performance in a
small, rugged
stainless steel
connection:
Attached four-wire
20-gauge direct
burial polyurethane
jacketed
shielded cable.
Process
Connections:
Protective Nose
Cone for direct
submergence in
liquids.
Materials:
316 stainless steel
body, BUNA N oring,
neoprene grommet,
316 stainless steel
diaphragm,
polyurethane
jacketed
cable.
Weight: 8 oz.
(without cable)
19.2K baud data
transmission
Narrow 1-inch diameter
Fully repairable and
field calibrateable
Fully temperature
compensated 0-50°C
Small rugged design
resists severe
environments
No breather tubes or
dessicants required
enclosure.
Ultra stable,
process isolated,
piezo-resistive
sensor, and
State-of-the-art
microprocessor,
enabling
extensive
compensation
routines.
Outstanding
performance,
long-term
stability, and
several digital or
4/20 mA
transmission
output options.
Standard ranges:
0-5 psi (0-12 ft.
H2O)
0-15 psi (0-35 ft.
H2O)
0-30 psi (0-70 ft.
H2O)
0-50 psi (0-115
ft. H2O)
0-100 psi (0-160
ft. H2O)
0-350 ft. H2O
Other ranges
optional.