NAME
:
Balkrishna Maruti Dawari
PERMANENT ADDRESS
:
Flat No. 10, Nirmal Park ‘A’ Hsg. Society,
Dhanakavdi, PUNE - 411 043
DATE OF BIRTH
:
27th July 1970
E-mail ID
:
bmd.civil @coep.ac.in ,
bal_dawari @yahoo.co.in
SPECIALIZATION
:
1. Finite Element Analysis
(Linear/Nonlinear)
2. Computational Plasticity
3. Continuum Damage Mechanics
EDUCATIONAL QUALIFICATIONS:
Examination
School/College/
University
Board/University
Date of
Passing
Grade &
Percentage
S.S.C.
Maharashtra High
school, Kolhapur
SSC Board, Pune
1985
80.57
Diploma in Civil
Engg
Govt. Polytechnic,
Kolhapur
B. T. E.
Maharashtra State
1988
74.55
B.E.(Civil)
Kolhapur Institute
of Technology,
Kolhapur
Shivaji University,
Kolhapur
1994
71.75
M.E.(Civil –
Structural Engg)
Walchand College
of Engg. Sangli
Shivaji University,
Kolhapur
2004
71.29
Ph. D.
Indian Institute of
Science,
Bangalore
Indian Institute of
Science, Bangalore
2010
--
DISSERTATION TOPIC (M.E.)
: Some Studies on Analysis of Circular Water
Tanks
RESEARCH TOPIC (PhD)
: Nonlinear Finite Element Analysis of Damage
Coupled Strain Space Plasticity
Bio Data /1
PUBLICATIONS:
National level (Conference)
1.
“Strain-space Plasticity in Engineering Applications”, by B. M. Dawari and P. C.
Pandey, Conference Proceedings, RDSE-2005, First National Conference on
Recent Developments in Structural Engineering at Manipal Institute of
Technology, Manipal (Karnataka) 29-30 August, 2005.
2. “'Integrated Force Method Of Indeterminate Structures' by A.P. Khatri and
B.M.Dawari, Student Symposium on Research in Civil Engineering, March 5-6,
2009, IIT Madras, Chennai.
3. “Continuum Damage Analysis of Plane Stress And Plane Strain Problems' By S.
D. Patil And B. M. Dawari, Student Symposium on Research in Civil
Engineering, March 5-6, 2009, IIT Madras, Chennai.
4. “Analysis and Design of Skywalk”, by S. Bhadbhade and B. M. Dawari, Student
Symposium on Research in Civil Engineering, March 5-6, 2009, IIT Madras,
Chennai.
5.
“Flutter Analysis of AGARD 445.6 Swept Wing Using ANSYS Software”, by
A.K.Sabale and B.M.Dawari, National Conference on Advances in Composites
and Solid Mechanics, Dec 7-8,SVIT,Vasad,Gujarat
6. “Advanced Analysis Method for Exact Behavior of Steel Frames”, by V.Y.
Kumbhar and B. M. Dawari, CCERP 2012,April 20-21, 2012, MIT, Manipal,
Karnataka
7. “Pseudo-static analysis of Concrete Block for Turbine”, by Kulkarni S. S.,
Tandale A.M., Badsal A.P. and B. M. Dawari, NCET-2012, Dec.27-28,
2012,Shivaji University ,Kolhapur
8. “Finite Element Analysis For Cross Sectional Behavior of Austenitic Stainless
Steel I Sections”, by B.M.Dawari and A. S. Lande , 9th SEC-2014,Dec. 22-24
2014, Indian Institute of Technology (IIT) Delhi.
9. “Wind Analysis of Tall Buildings Using Computational Fluid Dynamics” by B.M.
Dawari and K.S. Shingte, 9th SEC-2014,Dec. 22-24 2014, Indian Institute of
Technology (IIT) Delhi.
Bio Data /2
International level (Conference)
1. “Comparison of Strain-space Plasticity and Stress-space Plasticity in the context
of Non-linear Finite Element Analysis”, by B. M. Dawari and P. C. Pandey,
Conference Proceedings, ICCMS-04, International Congress on Computational
Mechanics and Simulation at IIT Kanpur, 9-12 December 2004, pp., 324-331.
2. “Solution of Elasto-plastic Problems using Strain-space Plasticity”, by
B.M.Dawari and P.C.Pandey, Conference Proceedings, ICTACEM 2004,Third
International
Conference
on
Theoretical,
Applied,
Computational
and
Experimental Mechanics at IIT Kharagpur, 28-30 December, 2004.
3. “FRP Composites in Masonry Strengthening: Some Research Issues”, by
P.C.Pandey, D. Durgaraju, and B.M.Dawari, Conference Proceedings, Rehab
Technology Summit at Hyderabad, India, 11-12 March 2005,pp., 66-80.
4. “Finite Element Implementation of Strain-Space Plasticity for the Analysis of
Structures Subjected To Cyclic Loading”- B. M. Dawari and P. C. Pandey,
RDSE-2007, International Conference on Recent Developments in Structural
Engineering at Manipal Institute of Technology, Manipal (Karnataka) Aug 29-30,
2007.
5. “Concrete Compressive Strength For Non-Standard Specimens” by V. B. Dawari,
B. M. Dawari and R. R. Joshi, RDSE-2007, International Conference on Recent
Developments in Structural Engineering at Manipal Institute of Technology,
Manipal (Karnataka) 30August – 1 September , 2007.
6. “3-Dimensional Strain Strain – Space Plasticity : Formulation and Computation”,
by B. M. Dawari and P.C.Pandey, Conference Proceedings International
Conference on Multiscale Modeling and Simulation (ICMMS 08) at IISc,
Bangalore, Jan 2 – 4, 2008.
7. “Strain Space Solution for the Elasto-plastic analysis of adhesively Bonded single
Lap Joint”, by B.M.Dawari and P.C.Pandey, Conference Proceedings, IUTAM
Symposium on Multi-Functional Material Structures and Systems, ) at IISc,
Bangalore, Dec. 10 -13, 2008.
8. “Strain-Space Plasticity Solution for the Analysis of
Perfectly-Plastic
Axisymmetric Problems”, by B. M. Dawari, P. C. Pandey, Conference
Bio Data /3
Proceedings, Structural Engineering Convention (SEC-2008), Dec. 18 – 20, 2008,
Structural Engineering Research Centre, Chennai, India.
9.
“Application of Artificial Neural Networks for Prediction of Concrete Strength”,
by V. B. Dawari, B. M. Dawari S. B. Buchade, Conference Proceedings ,
Structural Engineering Convention (SEC-2008), Dec. 18 – 20, 2008, Structural
Engineering Research Centre, Chennai, India.
10. “Strain-Space Plasticity: Current Status”, by P. C. Pandey and B. M. Dawari,
International Conference on Computational Mechanics and Simulations (ICCMS09), December 1-5, 2009, IIT Bombay, Mumbai, India.
11. “Damage Coupled elasto-plastic analysis of adhesively bonded single lap joint”,
by Amar Gajjam, Patanjalee Walunjkar and B. M. Dawari, Third International
Conference on Computational Mechanics and Simulations (ICCMS-09),
December 1-5, 2009, IIT Bombay, Mumbai, India.
12. “Strain-Space formulation for Elasto-Viscoplasticity ”, by B.M.Dawari and
R.S.Iyengar,4th International Conference on Structural Stability and Dynamics,
ICSSD 2012,Jan. 4-6, 2012, MNIT, Jaipur
13. “Implementation of Strain-space Chaboche model”, by B.M.Dawari and
P.C.Pandey, 3rd Asian conference on Mechanics of Functionally graded Material
and Systems, ACMFMS-2012, Dec. 5-8, 2012,IIT.Delhi
14. “Strain-space Plasticity coupled with Damage”, B.M.Dawari and P.C.Pandey,
Structural Engineering Convention-2012, Dec. 19-21,2012,SVNIT, Surat
15. “Vibration analysis of Concrete Turbine block”, B. M. Dawari and S.S.Kulkarni,
4th Nirma University International Conference on Engineering (NUiCONE 2013)
16. “Damage coupled Strain-space Cyclic Plasticity”, By B.M.Dawari
and
V.B.Dawari, ACMFMS,at Nara, Japan Oct 10-13, 2014
17. “Rate dependent strain-space plasticity formulation”, B.M.Dawari and R.S.
Iyengar, 5th ICCMS, 10-13 Dec.,2013 at IIT Madras
18. “Behaviour of steel beam sections for lateral torsional buckling”, B.M.Dawari
and R.M. Munde, 5th ICCMS, 10-13 Dec.,2013 at IIT Madras
Bio Data /4
International level (Journal)
1. “Strain Space Solution for the Elasto-plastic analysis of adhesively Bonded single
Lap Joint”, by B. M. Dawari and P. C. Pandey – IUTAM Symposium on MultiFunctional Material Structures and Systems, IUTAM Bookseries, Vol. 19, DOI :
10.1007/978-90-481-3771-8_23; Springer Netherlands, 2010, pp. 233-240.
2. “Properties of Concrete with Metakaolin and Fly Ash as partial replacement to
Cement”, by S. K. Nalawade, H.K.Munot, and B. M. Dawari, Int. J of Earth
Sciences and Engg., Vol. 04, No. 06 SPL, Oct 2011, pp. 1059-1059
3.
“Simplification for Train loading on Bridges”, by A. Agrawal, S.Sreyash Rao,
and B.M.Dawari, Int. J of Earth Sciences and Engg., Vol. 04, No. 06 SPL, Oct
2011, pp. 744-747.
4. “Strain-Space Plasticity: a Superior Alternative”, by B. M. Dawari and P. C.
Pandey, Journal of Structural Engineering, Vol.40, No.2, June-July 2013, pp.95103
EXTERNALLY FUNDED RESEARCH
1.
“Nonlinear Finite Element Studies on Failure of Adhesively Bonded Lap Joints
using Continuum Damage Mechanics” by P.C.Pandey and B.M.Dawari, Dec.
2010,
Deptt. of Civil Engg., IISc, Bangalore, PROJECT :(ARDB)
DRAO/08/1051165/M//I submitted to Aeronautics Research and Development
Board, India.
2. “Non-linear Finite Element studies on Stainless-steel using Continuum Damage
Mechanics”, Research Promotion Scheme, funded by AICTE (On-going)
Ph.D. Dissertation Guided
1. Continuum Damage studies on Concrete structures (On-going)
Bio Data /5
PROFFESSIONAL EXPERIENCE:
No.
Name & address of
the employer
Period
From
To
YearMonthDays
Junior Engineer
10/06/1991
31/05/1992
00-11-22
Designation
1.
Kolhapur Muncipal
Corporation,
Kolhapur
2.
Government
Polytechnic,
Ratnagiri
Lecturer in Applied
Mechanics
18/08/1994
21/03/1996
01-07-04
3.
College of
Engineering, Pune
Lecturer in Applied
Mechanics
22/03/1996
17/08/2007
11-04-26
3.
College of
Engineering, Pune
Associate Professor,
Applied Mechanics
18/08/2007
Till 31/3/15
7-02-13
Total Experience Up to 31st March 2015 :
20 Year 06 Months
SHORT TERM COURSES:
Training Name
‘Human Resource
Development in Class
Room’
(ISTE – AICTE
Approved Course)
‘Materials For The
New Millennium’
(ISTE – AICTE
Approved Course)
Workshop on
Earthquake Resistant
Design of RC
Buildings
A Graphical
Programming
Language LabVIEW
and Its Industrial
Applications
LaTex for Technical
Documentation
From Date
December 3,
2001
To Date
December 31, 2001
April, 29 2002
May, 27 2002
Organization
Maharashtra State
Institute of Hotel
Management and
Catering
Technology, Pune
College of
Engineering, Pune
December 17,
2007
December 21, 2007
College of
Engineering, Pune
May14,2012
May25,2012
College of
Engineering, Pune
June 12,2012
June 16,2012
College of
Engineering, Pune
Bio Data /6
Training Name
Total
From Date
12 Weeks
To Date
Organization
MEMBERSHIPS OF PROFESSIONAL ORGANISATIONS:
1. Life Member of Indian Society of Technical Education
2. Life Member of Indian Society of Computational Mechanics
3. Member of Institute of Smart Structures and System
CONFERENCES & WORKSHOPS ORGANISED:
Workshop Name
From Date
Workshop
on 17/12/2007
Earthquake Resistant
Design
of
RC
Buildings
To Date
21/12/2007
Finite Elements
Engineering
13/07/2012
Total
in 09/07/2012
Remarks
Worked as Coordinator
The
workshop
was
organised as TEQIP
Networking activity and
it was approved by ISTE.
Worked as Coordinator
The
workshop
was
organised as TEQIP
activity
02Weeks
CONFERENCES AND WORKSHOPS ATTENDED :
1. Workshop on ‘Engineering Pedagogy’, at IISc, Bangalore, July, 30-31, 2004.
2. ‘14th International Workshop on Computational Mechanics of Materials
(IWCMM 14)’, organized by IIT, Bombay, September, 23-25, 2004.
3. ‘International Congress on Computational Mechanics and Simulation (ICCMS 04), held at IIT, Kanpur, December, 9-12, 2004.
4. ‘3rd International Conference on Theoretical, Applied, Computational and
Experimental Mechanics (ICTACEM 2004), held at IIT, Kharagpur, December
28-30, 2004.
5. ‘Rehab Technology Summit’ held at National Academy of Construction,
Hyderabad, March 11-12, 2005.
6. Workshop on ‘Scientific Computation, Numerical Analysis and applications’,
organized by IISC, Bangalore, July 04-15, 2005.
Bio Data /7
7. First National Conference on ‘Recent Developments in Structural Engineering
(RDSE – 2005)’, at Manipal Institute of Technology, Manipal (Karnataka) August
29-30, 2005.
8. ‘International Conference on Computational and Experimental Engineering and
Sciences (ICCES’05)’, at IIT, Madras, December, 1-6, 2005.
9. ‘The Structural Engineering Convention 2005 (SEC – 2005), at IISc, Bangalore,
December, 14-16, 2005.
10. Workshop on ‘Advanced Finite element method and Computational Techniques
(AFCT-2007)’, held at Manipal Institute of Technology (MIT), Manipal,
Karnataka, August, 29, 2007.
11. International Conference on ‘Recent Developments in Structural Engineering
(RDSE – 2007) organized by Manipal Institute of Technology, Manipal
(Karnataka), August 30–September 1, 2007.
12. Structural Engineering Convention (SEC-2008), Dec. 18 – 20, 2008, Structural
Engineering Research Centre, Chennai, India.
13. Third International Conference on Computational Mechanics and Simulations
(ICCMS-09), December 1-5, 2009, IIT Bombay, Mumbai, India.
14. International Conference on Structural Stability and Dynamics, ICSSD 2012,Jan.
4-6, 2012, MNIT, Jaipur
15. Structural Engineering Convention, SEC 2014 ,
Bio Data /8
COURSES TAUGHT:
Class
Subject
1
F. Y. B. Tech.
Engineering Mechanics
2
S. Y. B. Tech.
Strength of Materials
3
S. Y. B. Tech.
Concrete Technology
4
T. Y. B. Tech.
Theory of Structures - I
5
T. Y. B. Tech.
Design of Steel Structures
6
T. Y. B. Tech
Theory of Structures - II
7
T. Y. B. Tech.
Computer Applications in Civil Engineering
8
B. Tech.
Matrix Analysis of Structures (Elective)
9
B. Tech.
Introduction to Finite Element Analysis (Elective)
10 F. Y. M. Tech.
Solid Mechanics
11 F. Y. M. Tech.
Finite Element Method
12 F. Y. M. Tech.
Non Linear Analysis of Structures
13 F. Y. M. Tech.
Structural Dynamics
14 F. Y. M. Tech.
Theory of Plates and Shells
15 F. Y. M. Tech.
Engineering Mathematics
16 F. Y. M. Tech.
Matrix Methods of Structural Analysis
17 F. Y. M. Tech.
Computer Methods for Structural Analysis
18 S. Y. B. Tech.
Computer Aided Analysis of Structures
LIST OF UNDERGRADUATE PROJECTS GUIDED:
Year
Title of the project
1
1996-1997 Optimisation for Design of Ground Service Reservoir
2
1997-1998 Computer Aided Design of Slabs
3
1998-1999 Comparative Study Between Crushed Sand and Natural Sand
4
1999-2000 Analysis and Design of Mechanised Assault Bridge
5
2000-2001 Use of fly Ash in Concrete Mix Design
Bio Data /9
6
2002-2003 Seismic Analysis and cost comparison of RC buildings
7
2007-2008 Analysis and Design of Modern Parking System
8
2008-2009 Design of Skywalk Structure
9
2009-2010 Analysis and Modeling of Cylindrical Liquid Storage Tanks
10 2010-2011 Analysis of Pre-stressed Concrete Bridges
11 2012-2013 Dynamic Analysis and Design of Concrete Block Foundation for
Francis Turbine
12 2013-2014 Analysis and Design of Pre-Engineered Buildings
13 2014-2015 Vibration based Damage detection of Structures
LIST OF MASTER’S PROJECTS GUIDED
Year
Title of the thesis
1
1999-2000 Finite Element Analysis of Elevated Storage Reservoir
2
2000-2001 Finite Element Analysis of High Grade Prestressed Concrete Box
Girder Bridge
3
2001-2002 Finite Element Analysis of A Precast RC Column-Beam Joint Using
2-D Element
4
2002-2003 Seismic Analysis of 3 Dimensional RC Framed Structures.
5
2002-2003 Seismic Analysis of RC Frames With Masonary Infill
6
2007-2008 Finite Element Analysis of 2-Dimensional Plasticity Problems
7
2007-2008 Analysis and Design of Composite Framed Structures For Buildings
8
2007-2008 Behaviour of Brick In-filled RC Frame With Central Door Opening
and Lintel Beam
2007-2008 Behaviour of Brick In-filled RC Frame With Central Window
Opening and Lintel Beam
9
10 2007-2008 Analysis of 2-D Plasticity Problems using Finite Element Method
11 2008-2009 Finite Element Analysis of 2-Dimensional Plasticity Problems
12 2008-2009 Study of Continuum Damage Analysis for Plane stress and Plane
strain Problems
13 2009-2010 Elasto-Plastic Analysis of Reinforced Concrete Beams
14 2009-2010 Damage Studies on Reinforced Concrete Beams
15 2010-2011 Non-linear Finite Element Analysis using Rate-dependent Strainspace Plasticity
Bio Data /10
16 2010-2011 Earthquake Simulations of Long Pre-stressed Concrete Bridge using
Open SEES framework on HPC System
17 2011-2012 Aero-elastic Instability Analysis of Aircraft Wings by coupled CFDCSD Method in Time-Domain using ANSYS Software
18 2011-2012 Advanced Analysis for Exact Behavior of Steel Frames
19 2011-2012 Design Software for Composite Steel Concrete Columns
20 2012-2013 Application of Spectral Element Method for Beams and Plates
subjected to Dynamic Loading
21 2012-2013 Seismic Performance of Reinforced Concrete Structures using
Rigid-Plastic Method
22 2013-2014 Wind Analysis of Tall RC Buildings using Computational Fluid
Dynamics approach
23 2013-2014 Finite Element Analysis of Cross-sectional behavior of Stainless
steel I-sections
24 2014-2015 Rigid Plastic Seismic analysis method for Reinforced Concrete
Frames(On-going)
25 2014-2015 Implementation of UMAT in ABAQUS for Chaboche’s model of
Stainless Steel Plasticity(On-going)
Extra-Academic activities and honours:
1. Data-entry In-charge for F.Y Pharmacy admissions (1998-99)
2. Assistant-Director, B.E.CAP, Pune University (May 1998)
3. Consultancy work for the projects of MJP,PMC and PCMC
4. Member of the College Library committee
5. Parent Teacher for F. Y. Civil Class (1997-98)
6.
In-charge Accounts for All India University Rowing competition (2002)
7. In-charge Data entry for online F. Y. Pharmacy admissions (2001,2002)
8. Expert for Pune University PG syllabi revision (2002)
9. Selected as a QIP research scholar for Ph D by IISc, Bangalore
10. Expert Lectures in Mathematics for 12th Standard students of Kendriya Vidyalaya
Hebbal, Bangalore
Bio Data /11
11. ‘National Workshop on Earthquake Resistant Design of RC Buildings’, 17th – 21st
December 2007. The workshop was organised as TEQIP Networking activity and it
was approved by ISTE. – Coordinator
12. ‘Continuum Damage Mechanics applied for Reinforced Concrete Beams’, invited talk
given at National Conference on Emerging Technologies for Sustainable
Developments, NCET-2012, Dec. 27-28, Department of Technology, Shivaji
University, Kolhapur.
13. Conducted Ph.D. course work in Engineering and Technology for “Advances in
Structural Engineering” during 17-19 th May 2013 at Department of Technology ,
Shivaji University, Kolhapur.
14. Co-ordinator for Post-graduate program in Structural Engineering since July 2013.
15. Guest Lecture on “Application of Advanced Solid Mechanics” given to M.E. Civil
(Structures) students on 20th Nov., 2013 at AISSMS College of Engineering, Pune.
16. Expert Lecture on “Scope of Finite Element Method in Civil Engineering” on 9th
Dec. 2013, in Faculty Development Program organized by Sinhgad College of
Engineering, Pune.
17. Chaired Technical session GS-3: Failure Analysis and Nonlinear Problems at Asian
Conference on Mechanics of Functional Materials and Structures, ACMFMS 2014 at
Nara, Japan, 10-13 Oct 2014.
Bio Data /12