Mine Closure 2015 – Editor’s names (eds)
© 2015 InfoMine Inc., Canada, ISBN to come
Mine Closure proceedings — style template
A.F. Surname Department, University/Company, Country (no job titles, no mine sites, no cities)
J.S.A. Surname Department, University/Company, Country
Abstract
The abstract is to provide a general scope of the work and applications. Please limit the abstract to
approximately 500 words.
1
Introduction (to using this style template)
Please note that the styles are locked in this template document, however, all styles that are necessary for
you to format and draft your paper should still be available in the Styles Library. The styles are listed
alphabetically, except for the last few. We have tried to create all the styles that you will need.
Please ensure your settings are as indicated in Figure 1 in order to access the styles.
Figure 1 Settings required to use the Style Library. Please note that images used within your
paper must be of high quality, resizable, relevant, and referred to within the text. Also
Figure captions must be sentence case, with no full stop at the end
Please do not use styles and formatting from other documents, please use only what is available in the Styles
Library.
2
Heading, sentence case
Paragraphs of text. Luptatatia coresci pitendel ea con rateceatem volupta ssenis solupti delessum aruptur
simillabo. Odis dolor audicae sequi volupta tecatibus dolut exceperum quae doloreperit quatem consequ
idebis quam et dit, evellor ihic imporro berruptat aligentibus eicid quam, cus auda quam enimolorerio is ut
quia suntio dipienis alit at (Parida and Kumar, 2004).
Mine Closure 2015, Vancouver, Canada
1
Chapter name
Authors
Paragraphs of text. Aliquat del ipienderum quistios doluptam simi, unt quodit que de seroriti con prae re net
que dem in nonet maxim volendit utem. Nam dolesequi re paria et veliqua ssequas eost odisition es aut et
doloremo comnimus volupta ecatur 75%Cw and 85%Cw (solids by weight).
Table 1
Rules for tables use. Table caption, sentence case, no full stop at the end
Heading
Heading
Table widths will be adjusted as necessary
Tables must be centred on the page
Content will be realigned (left, centre, right)
as required
The only borders allowed are top and
bottom edges, plus under the 'heading'
rows
Columns can be as wide as necessary to fit the
data
Text size should be consistent throughout
the table, the styles should be used
If a table is too large it can be moved to a
landscape page
Try to avoid merging cells unless it is
absolutely necessary
Each line of new data should be entered into a
new row/cell, not listed within one cell
Tables and Figures are numbered
according to the order in which they are
inserted into the paper, not according to
which section they are within
It is preferable that images of tables are not
used and that the tables are editable such as
this one
Paragraphs of text. Ut et quatibus sanda dolor reribus, iumquistius modi repratur, eos res magnation re
veligendit quia comnime ndiaspelent di ut od quunt.
Please use bullet points judiciously
 Bullet example, tagged as Bulleted Text.
2.1
Subheading, do not use auto numbering, all headings must be numbered
Paragraphs of text. Ignatia tiorerumque natis aut odis di cum as sus rehent hiciet et experspis exceseritam,
sam exerum idigent.
2.1.1
Next subheading level
Paragraphs of text. Nem volores vendam nis de most veligni squiam aut aut estiasim rero debit latur aperum
velit volum, simusdae ad eatquidi tectatem quas accaerum quat pa quis aut vendus, et velit omnihillut
odiossit as re non oluptatur, incia sitae latatem ex et que estio doluptum re esciunt res conectiumque accum
as eossum, sequi volendest volupti orumqui omnienim veruptiunte quae doloribus explit, ommoluptate pe
repe sim quam inim sunt.
“Quoted text (longer than a few words) should be set like this so that it stands out from the body
of the text. A reference citation should be provided at the end.” Minerals Council of Australia
(2007)
2.1.1.1
Final subheading level
Paragraphs of text. Ehenimus sit, nonserum, sint hitatectur sitae laccati int aut autempe liquis non etum
quiaeperit, simuscia dolut pratur? Lest experum fuga. Fugit voloreped unt lacesti aturibusam et dolorit harum
fugiam aditati dolupta sam nimin nos eaquatur, aut volorepro doluptia veles nese voluptatur, incia sitae
2
Mine Closure 2015, Vancouver, Canada
Section Name
latatem ex et que estio doluptum re esciunt res conectiumque accum as eossum, sequi volendest volupti
(Pashias et al., 1996):
Ch
T   T 
 P  Pv    Pv 

    Lv 
  Dv
y y  y 
 P  y  y 
(1)
Where:
Ch
3
= each element introduced in an equation must be explained directly after that equation.
Conclusions
No new information should be introduced within a conclusion, nor should Figures or Tables be inserted.
Acknowledgements
Feel free to acknowledge as necessary. This section is optional.
References
NOTE: Listed references should be cited within the paper, and alternatively all citations must have
references listed. Authors will be notified if citations or references are missing, please follow the Author's
Guidelines on how to format your references correctly. Below are many examples, including examples of
how to cite other Paste seminars.
Ahmed, M., Labelle, M., Brown, R. and Lahaie, R. (2009) Paste pumping and deposition field trials and concepts on Syncrude’s
dewatered MFT (centrifuge cake), in Proceedings 13th International Conference on Tailings and Mine Waste, 1–4 November
2009, Banff, Canada, pp. 417–427.
Australian Government (2011) Department of Sustainability, Environment, Water, Population and Communities, Post-mining
landform stability, viewed 12 January 2011, www.environment.gov.au/ssd/research/hgp/landform-stability.html, last
updated 26 March 2011.
Bedell, D. (2006) Thickening and filtration, in Paste and thickened tailings ‒ a guide, 2nd edition, R.J. Jewell and A.B. Fourie (eds),
Australian Centre for Geomechanics, Perth, Australia, pp. 95–123.
Been, K. and Jefferies, M.G. (1985) A state parameter for sand, Geotechnique, Vol. 35, pp. 99–112.
Beier, N., Alostaz, M. and Sego, D. (2009) Natural dewatering strategies for oil sands fine tailings, in Proceedings 13th International
Conference on Tailings and Mine Waste, 1–4 November 2009, Banff, Canada, pp. 845–858.
Birkhofer, B., Debacker, A., Russo, S., Ricci, S. and Lootens, D. (2012) In-line rheometry based on ultrasonic velocity profiles:
comparison of data processing methods, Applied Rheology, Vol. 22(4), pp. 44701-1–44701-9.
Birkhofer, B.H. (2007) Ultrasonic in-line characterization of suspensions, Laboratory of Food Process Engineering, Institute of Food
Science and Nutrition, Swiss Federal Institute of Technology (ETH), Zurich, Switzerland.
Blight, G.E. (1989) Erosion losses from the surfaces of gold-tailings dams, Journal of the South African Institute of Mining and
Metallurgy, Vol. 89(1), pp. 23−29.
Chhabra, R.P. and Richardson, J.F. (2008) Non-Newtonian flow in the process industries, Oxford, Great Britain: ButterworthHeinemann.
Cifuentes, L.A. and Verdugo, R. (2009) Undrained monotonic and cyclic response in thickened tailings, in Proceedings 12th
International Seminar on Paste and Thickened Tailings (Paste09), R.J. Jewell, A.B. Fourie, S. Barrera, J. Wiertz (eds), 21‒24
April 2009, Viña Del Mar, Chile, Gecamin Limited, Santiago, Australian Centre for Geomechanics, Perth, pp. 313–322.
Davies, M.P. and Rice, S. (2001) An alternative to conventional tailing management – dry stack filtered tailings, in Proceedings 8th
International Conference on Tailings and Mine Waste, Fort Collins, Colorado, USA, A.A. Balkema, The Netherlands, pp. 411–
422.
Davies, M.P., Lupo, J., Martin, T., McRoberts, E., Musse, M. and Ritchie, D. (2010) Dewatered tailings practice – trends and
observations, in Proceedings Fourteenth International Conference on Tailings and Mine Waste, Vail, Colorado, USA, A.A.
Balkema, The Netherlands, pp. 133–142.
Department of Education, Science and Training (DEST) (2007) AQTF 2007 Standards for Accredited Courses, Commonwealth of
Australia, Department of Education, Science and Training.
Elander, P., Lindvall, M. and Hakansson, K. (1998) Prevention and control of pollution from mining waste products, state-of-the-art
report, Mitigation of the Environmental Impact from Mining Waste (MiMi), MiMi Print, Sweden, Linköping, pp. 2–29.
Fock, H., Wiklund, J. and Rasmuson, A. (2009) Ultrasound Velocity Profile (UVP) measurements of pulp suspension flow near the wall,
Journal of Pulp and Paper Science, Vol. 35(1), pp. 26–33.
Mine Closure 2015, Vancouver, Canada
3
Chapter name
Authors
Fourie, A.B. (2012) Perceived and realised benefits of P&TT for surface deposition, in Proceedings 15th International Seminar on Paste
and Thickened Tailings (Paste 2012), R.J. Jewell, A.B. Fourie and A. Paterson (eds), 16–19 April 2012, Sun City, South Africa,
Australian Centre for Geomechanics, Perth, pp. 53–64.
Haldenwang, R. (2003) Flow of non-Newtonian fluids in open channels, unpublished D. Tech thesis, Cape Technikon, Cape Town,
South Africa.
Haldenwang, R. and Slatter, P.T. (2006) Experimental procedure and database for non-Newtonian open channel flow, Journal of
Hydraulic Research, Vol. 44(2), pp. 283–287.
Haldenwang, R., Kotze, R. and Chhabra, R. (2012) Determining the viscous behavior of non-Newtonian fluids in a flume using a laminar
sheet flow model and Ultrasonic Velocity Profiling (UVP) system, Journal of the Brazilian Society of Mechanical Sciences and
Engineering, Vol. XXXIV(3), pp. 276–284.
Haldenwang, R., Slatter, P., Alderman, N., Kotzé, R., Sery, G. and George, N. (2006) Balanced beam tube viscometry versus rotary
viscometry: a comparison, in 12th International Conference on Transport and Sedimentation of Solid Particles, Tbilisi, Georgia,
pp. 145–156.
Hancock, G.R. and Willgoose, G.R. (2011) Gully development, evolution and erosion using a landscape evolution model, in
Proceedings 19th International Congress on Modelling and Simulation, 12–16 December 2011, Perth, Australia.
Jensen, J.A. (1996) Estimation of blood velocities using ultrasound: a signal processing approach, Great Britain: Cambridge University
Press.
Jewell, R. (2002) Paste and thickened tailings in the Australian mining industry, in Proceedings 5th International Seminar on Paste
and Thickened Tailings (Paste 2002), Santiago, Chile, Australian Centre for Geomechanics, PowerPoint presentation.
Jewell, R. (2006) Introduction, in Paste and Thickened Tailings ‒ A Guide, 2nd edition, R.J. Jewell and A.B. Fourie (eds), Australian
Centre for Geomechanics, Perth, Australia, pp. 3–9.
Jewell, R. and Fourie, A.B. (2006) Paste and thickened tailings ‒ a guide, 2nd edition, Australian Centre for Geomechanics, Perth, 242
p.
Junqueira, F., Wilson, G. and Oliveira, M. (2009) Surface paste disposal of high-sulphide tailings at Neves Corvo Mine in Portugal, Part
1: Estimation of tailings desaturation and implications on ARG generation, in 8th International Conference on Acid Rock
Drainage (ICARD) and Security, the Future: Mining, Metals and the Environment in a Sustainable Society 2009, Curran
Associates, Inc. (ed), 22–26 June, Sweden, Skelleftea, Vol. 1, p. 1046.
Kam, S., Girard, J., Hmidi, N., Mao, Y. and Longo, S. (2011) Thickened tailings disposal at Musselwhite Mine, in Proceedings 14th
International Seminar on Paste and Thickened Tailings (Paste2011), R.J. Jewell and A.B. Fourie (eds), 5‒7 April 2011, Perth,
Australia, Australian Centre for Geomechanics, Perth, pp. 225–236.
Kotzé, R. and Haldenwang, R. (2011) Development of ultrasonic in-line rheometer: evaluation, optimisation and verification, in 15th
International Conference on Transport and Sedimentation of Solid Particles, Wroclaw, Poland, pp. 49–61.
Kotzé, R., Haldenwang, R. and Slatter, P.T. (2008) Rheological characterisation of highly concentrated mineral suspensions using an
ultrasonic velocity profiling with combined pressure difference method, Applied Rheology, Vol. 18, pp. 62114–62124.
Kotze, R., Wiklund, J. and Haldenwang, R. (2012) Optimization of the UVP+PD rheometric method for flow behavior monitoring of
industrial fluid suspensions, Applied Rheology, Vol. 22, pp. 42760-1–42760-11.
Kotzé, R., Wiklund, J. and Haldenwang, R. (2013) Optimisation of pulsed ultrasonic velocimetry system and transducer technology for
industrial applications, Ultrasonics, Vol. 53, pp. 459–469.
Kubach, C. (2010) Dewatering equipment, removing solids from liquid-solid mixtures (slurries), viewed 7 November 2010,
http://www.mine-engineer.com/mining/plate.htm.
Lazarus, J.H. and Slatter, P.T. (1988) Comparative rheological characterisation using a balanced beam tube viscometer and rotary
viscometer, in British Hydromechanics Research Association 10th International Conference on the Hydraulic Transport of
Solids in Pipes, Hydrotransport 10, Paper J2, pp. 291–232.
Li, A.L., Been, K., Ritchie, D. and Welch, D. (2009) Stability of large thickened, non-segregated tailings slopes, in Proceedings 12th
International Seminar on Paste and Thickened Tailings (Paste09), R.J. Jewell, A.B. Fourie, S. Barrera, J. Wiertz (eds), 21‒24
April 2009, Viña Del Mar, Chile, Gecamin Limited, Santiago, Australian Centre for Geomechanics, Perth, pp. 301–312.
Lupo, J. and Hall, J. (2010) Dry stack tailings – design considerations, in Proceedings Fourteenth International Conference on Tailings
and Mine Waste, Vail, Colorado, USA, A.A. Balkema, The Netherlands, pp. 327–334.
Met-Flow SA. (2002) UVP Monitor – Model UVP-DUO user’s guide, Software version 3, Met-Flow SA, Lausanne, Switzerland.
Minerals Council of Australia (2007) Safety performance report of the Australian minerals industry 2006–200, viewed 20 February
2009, http://www.minerals.org.au.
Müller, M., Brunn, P.O. and Wunderlich, T. (1997) New rheometric technique: the gradient-ultrasound pulse Doppler method, Applied
Rheology, Vol. 7, pp. 204–210.
Mussé, M., Eldridge, T., Barrientos, M. and Silva, M. (2007) Modeling tools for development of tailings management plans, in
Proceedings 10th International Symposium Environmental Issues and Waste Management in Energy and Mineral Production
– SWEMP, 11–13 December 2007, Bangkok, Thailand, Curran Associates, Inc., New York , pp. 227–34.
Oliveira, M., Falé, P. and Rodrigues, A. (2011) Surface paste disposal of high-sulphite tailings part 1 – Construction of cells, in 22nd
World Mining Congress and Expo 2011, Aydoğdu Ofset (ed), 11–16 September 2011, Turkey, Vol. II, p. 365.
Ouriev, B. (2000) Ultrasound Doppler based in-line rheometry of highly concentrated suspensions, ETH dissertation No. 13523, Zurich,
Switzerland.
Parida, A. and Kumar, U. (2004) Managing information is key to maintenance effectiveness, in Proceedings Intelligent Maintenance
Systems (IMS) 2004 International Conference, K.H. Adjallah (ed), July 15–17, France, CD format only, 6 p.
4
Mine Closure 2015, Vancouver, Canada
Section Name
Pashias, N., Boger, D.V., Summers, J. and Glenister, D.J. (1996) A fifty cent rheometer for yield stress measurement, Journal of
Rheology 40(6), pp. 1179–1189.
Powell, R.L. (2008) Experimental techniques for multiphase flows, Physics of Fluids, Vol. 20(4), pp. 605–627.
Ritchie, D.G. (1999) A discussion of seismic design considerations for soil covers on tailings, in Proceedings Sudbury 99, Mining and
Environment II, Ontario, Canada, 13–17 September, D. Goldsack, N. Belzile, P. Yearwood and G. Hall (eds), Mineral Exploration
Research Centre, Laurentian University, Sudbury, Ontario, pp. 49–58.
Rosemont Copper Company (2008) Filtered tailings dry stacks current state of practice final report, prepared by AMEC Earth &
Environmental, Inc., viewed 21 November 2012, http://rosemontcopper.com/assets/docs/reports_10-8-10/tailings_white_
paper/tailings_dry_stacks-_white_paper-final.pdf.
Roussel, N. and Coussot, P. (2004) “Fifty-cent” rheometer for yield stress measurements: From slump to spreading flow, Journal of
Rheology, Vol. 49, pp. 705–718.
Shuttleworth, J.A., Thomson, B.J. and Wates, J.A. (2005) Surface paste disposal at Bulyanhulu – practical lessons learned, in
Proceedings Eighth International Seminar on Paste and Thickened Tailings (Paste05), R.J. Jewell and S. Barrera (eds), 20‒22
April 2005, Santiago, Chile, Australian Centre for Geomechanics, Perth, pp. 207–218.
Steger, R. (1994) OptischUnd Akustische Metoden in Der Rheometrie, Erlangen: University of Erlangen, pp. 1–100.
Takeda, Y. (1986) Velocity profile measurement by ultrasound Doppler shift method, International Journal of Heat and Fluid Flow,
Vol. 7(4), pp. 313–318.
Teh, C.I. and Houlsby, G.T. (1991) Analytical study of the cone penetration test in clay, Geotechnique, Vol. 41, pp. 17–34.
Theriault, J., Frostiak, J. and Welch, D. (2003) Surface disposal of paste tailings at the Bulyanhulu Gold Mine, in Proceedings Sudbury
2003 Mining and the Environment, G. Spiers, P. Beckett, and H. Conroy (eds), 25–28 May 2003, Sudbury, Canada, pp. 265–
269.
Tyler, D.B. and Werner, M. (2004) A case study of ground support improvement at Perseverance mine, in Proceedings Fifth
International Symposium on Ground Support in Mining and Underground Construction, E. Villaescusa and Y. Potvin (eds),
September 2004, Perth, Australia, A.A. Balkema, The Netherlands, pp. 55–63.
Ulrich, B. (2003) Toward a sensible use of paste tailings, Mining Environmental Magazine, The Mining Journal Limited, May, London,
pp. 21–23.
US EPA (2000) United States Environmental Protection Agency. Biosolids technology fact sheet, Belt Filter Press, EPA 832-F-00-057,
September, pp. 1–7.
USFS (2010) EIS Environmental impact statement Rosemont Copper Project, viewed 30 October 2010, http://www.rosemonteis.us/.
Verburg, R., Ross, C. and Oliveira, M. (2009) Surface paste disposal of high-sulphite tailings at Neves Corvo Mine in Portugal, Part 2:
Field trial cover performance monitoring and impact assessment, in 8th International Conference on Acid Rock Drainage
(ICARD) and Security, the Future: Mining, Metals and the Environment in a Sustainable Society 2009, Curran Associates, Inc.
(ed), 22–26 June 2009, Sweden, Skelleftea, Vol. 1, p. 1056.
Vietti, A.L. and Coghill, M. (2006) Slurry chemistry, paste and thickened tailings – a guide, R.J. Jewell and A.B. Fourie (eds), Australian
Centre for Geomechanics, Perth, Australia, 189 p.
Wiklund, J. (2007) Ultrasound Doppler based in-line rheometry: development, validation and application, SIK – The Swedish Institute
for Food and Biotechnology, Lund University, Sweden.
Wiklund, J. and Stading, M. (2008) Application of in-line ultrasound Doppler based UVP-PD rheometry method to concentrated model
and industrial suspensions, Flow Measurement and Instrumentation, Vol. 19, pp. 171–179.
Wiklund, J., Johansson, M., Shaik, J., Fischer, P., Windhab, E., Stading, M. and Hermansson, A.M. (2001) In-line rheological
measurements of complex model fluids using an ultrasound UVP-PD based method, in Annual Transactions – The Nordic
Rheology Society, 10th Anniversary conference, Trondheim, Norway, pp. 128–130.
Wiklund, J., Rahman, M. and Hakansson, U. (2012) In-line rheometry of micro cement based grouts – a promising new industrial
application of the Ultrasound based UVP+PD method, Applied Rheology, Vol. 22(4), pp. 42783-1–42783-11.
Wiklund, J., Shahram, I. and Stading, M. (2007) Methodology for in-line rheology by ultrasound Doppler velocity profiling and pressure
difference techniques, Chemical Engineering Science, Vol. 62, pp. 4159–4500.
Wiklund, J., Stading, M. and Trägårdh, C. (2010) Monitoring liquid displacement of model and industrial fluids in pipes by in-line
ultrasonic rheometry, Journal of Food Engineering, Vol. 99, pp. 330–337.
Williams, M.P.A., Seddon, K.D. and Fitton, T.G. (2008) Surface disposal of paste and thickened tailings – A brief history and current
confronting issues, in Proceedings 11th International Seminar on Paste and Thickened Tailings (Paste08), A. Fourie, R. Jewell,
P. Slatter and A. Paterson (eds), Perth, Australia, Australian Centre for Geomechanics, pp. 143–164.
Wilson, G.W., Miskolczi, J., Dagenais, A., Levesque, I., Smith, Q., Lanteigne, L., Hulett, L. and Landriault, D. (2006) The application of
blended waste rock and tailings for cover systems in mine waste management, in Proceedings 7th International Conference
on Acid Rock Drainage (ICARD), 26–30 March, viewed 30 November 2012, http://www.imwa.info/docs/imwa_2006/2424Wilson-BC.pdf.
Young, N.W.G., Wasell, P., Wiklund, J. and Stading, M. (2008) Monitoring structurants of fat blends with ultrasound based in-line
rheometry (ultrasonic velocity profiling with pressure difference), International Journal of Food Science and Technology, Vol.
43, pp. 2083–2089.
Mine Closure 2015, Vancouver, Canada
5