SECTION 10306
MANUFACTURED WOOD FIREPLACES
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2014 - 2015 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1
1.2
1.3
SECTION INCLUDES
A.
Manufactured indoor wood fireplaces.
B.
Manufactured outdoor wood fireplaces.
C.
Outdoor gas log sets.
D.
Indoor gas log sets.
E.
Fireplace mantels and fireplace surrounds.
F.
Fireplace accessories.
RELATED SECTIONS
A.
Section 04200 - Surface-Bonded Concrete Unit Masonry.
B.
Section 06100 - Rough Carpentry.
C.
Section 09290 - Gypsum Board.
D.
Section 15100 - Plumbing Piping.
E.
Section 16050 - Common Work Results for Electrical.
REFERENCES
A.
ANSI Z21.44 - Gas-Fired Gravity and Fan Type Direct Vent Wall Furnaces.
B.
ANSI Z21.88 - Vented Gas Fireplace Heaters.
C.
Z21.50b - Vented Gas Fireplaces.
D.
ANSI Z223.1 - National Fuel Gas Code.
E.
CSA 2.22b - Vented Gas Fireplaces.
F.
CSA 2.33 - Vented Gas Fireplace Heaters.
G.
CAN/ULC S610 - Factory-Built Fireplaces.
H.
UL 127 - Standard for Factory-Built Fireplaces.
I.
UL 907 - Standard for Fireplace Accessories
10306-1
J.
1.4
1.5
1.6
SUBMITTALS
A.
Submit under provisions of Section 01300.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings: Provide drawing of required clearances, rough-in of enclosure and utilities.
D.
Selection Samples: For each finish product specified, two complete sets of color chips
representing manufacturer's full range of available colors and finishes.
E.
Verification Samples: For each finish product specified, two samples, minimum size 6 inches
(150 mm) square representing actual product.
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.
B.
Installer Qualifications: Minimum 2 year experience installing similar products.
C.
Multiple Installation Mock-Up: Provide a mock-up for evaluation of site and framing
preparation techniques and installation workmanship.
1.
Provide representative fireplace in area designated by Architect.
2.
Do not proceed with remaining units until workmanship, installation and operation are
approved by Architect.
3.
Remake mock-up unit as required to produce acceptable work.
PRE-INSTALLATION MEETINGS
A.
1.7
1.8
Convene minimum two weeks prior to starting work of this section.
DELIVERY, STORAGE, AND HANDLING
A.
Deliver and store products in manufacturer's unopened packaging bearing the brand name
and manufacturer's identification until ready for installation.
B.
Handling: Handle materials to avoid damage.
PROJECT CONDITIONS
A.
1.9
UL 1482 - Standard for Safety for Solid-Fuel Type Room Heaters.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under
environmental conditions outside manufacturer's recommended limits.
SEQUENCING
A.
Ensure that products of this section are supplied to affected trades in time to prevent
interruption of construction progress.
1.10 WARRANTY
A.
Warranty: Provide manufacturer's standard warranty against defects in materials and
workmanship.
10306-2
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: Heatilator®, which is located at: 7571 215th St. W.; Lakeville, MN
55044 ; Toll Free Tel: 800-927-6841 ; Email:request info (swansonm@hearthnhome.com);
Web:www.heatilator.com
B.
Web: http://www.heatilator.com.
C.
Substitutions: Not permitted.
D.
Requests for substitutions will be considered in accordance with provisions of Section
01600.
MANUFACTURED INDOOR WOOD FIREPLACES
A.
General:
1.
Comply with applicable building codes.
2.
Comply with UL 127.
3.
Comply with portions of UL 1482 and UL 907 applicable.
B.
Constitution Wood Fireplace:
1.
Fronts-Doors: Constitution Cast Iron Doors.
2.
Mantel Shelf: As specified.
3.
Model C40 as manufactured by Heatilator.
a.
Unit Front/Back Width: 40 inches (1016 mm).
b.
Framing Front/Back Width: 42 inches (1067 mm).
c.
Unit Height: 43-13/16 inches (1113 mm).
d.
Framing Height: 44-7/8 inches (1140 mm).
e.
Unit Depth: 23-1/8 mm (587 mm).
f.
Framing Depth: 24 inches (610 mm).
g.
Firebox Capacity: 2.7 cu. ft. / 24 inches (610 mm) maximum log length.
h.
Peak BTU/Hour Output: 51,000 (14.9 kW).
i.
Heating Capacity: 1,000-2,600 sq. ft. (92 to 241 sq. m).
j.
Efficiency: EPA certified with emission levels of 3.25 grams per hour.
C.
Birmingham Wood Fireplace:
1.
Fronts-Doors: Bronze Glass Bi-fold Door.
2.
Fronts-Doors: Black Glass Bi-fold Door.
3.
Fronts-Doors: Bronze Mesh Door.
4.
Fronts-Doors: Black Mesh Door.
5.
Refractory: Birmingham-Traditional.
6.
Refractory: Birmingham-Herringbone.
7.
Cast Mantels: As specified.
8.
Mantel Shelf: As specified.
9.
Model Birmingham 36 as manufactured by Heatilator.
a.
Unit Front Width: 46-7/8 inches (1191 mm).
b.
Framing Front Width: 47-7/8 inches (1216 mm).
c.
Unit Back Width: 31-1/8 inches (791 mm).
d.
Framing Back Width: 47-7/8 inches (1216 mm).
e.
Unit Height: 74-1/8 inches (1883 mm).
f.
Framing Height: 74-1/4 inches (1886 mm).
g.
Unit Depth: 27-1/2 inches (699 mm).
h.
Framing Depth: 28-1/2 inches (724 mm).
i.
BTU/Hour Input: 150,000 (44 kW).
10.
Model Birmingham 42 as manufactured by Heatilator.
10306-3
11.
a.
Unit Front Width: 52-7/8 inches (1343 mm).
b.
Framing Front Width: 53-7/8 inches (1368 mm).
c.
Unit Back Width: 37-1/8 inches (943 mm).
d.
Framing Back Width: 53-7/8 inches (1368 mm).
e.
Unit Height: 74-1/8 inches (1883 mm).
f.
Framing Height: 74-1/2 inches (1892 mm).
g.
Unit Depth: 27-1/2 inches (699 mm).
h.
Framing Depth: 28-1/2 inches (724 mm).
i.
BTU/Hour Input: 150,000 (44 kW).
Model Birmingham 50 as manufactured by Heatilator.
a.
Unit Front Width: 60-7/8 inches (1546 mm).
b.
Framing Front Width: 61-7/8 inches (1571 mm).
c.
Unit Back Width: 45-1/8 inches (1146 mm).
d.
Framing Back Width: 61-7/8 inches (1572 mm).
e.
Unit Height: 74-1/8 inches (1883 mm).
f.
Framing Height: 74-1/2 inches (1892 mm).
g.
Unit Depth: 27-1/2 inches (699 mm).
h.
Framing Depth: 28-1/2 inches (724 mm).
i.
BTU/Hour Input: 150,000 (44 kW).
D.
SC60 Wood Fireplace:
1.
Fronts-Doors: Bi-fold Glass Door.
2.
Fronts-Doors: Gasketed Air Control Door.
3.
Wood Mantels: As specified.
4.
Stone Surrounds: As specified.
5.
Cast Mantels: As specified.
6.
Mantel Shelf: As specified.
7.
Model SC60 as manufactured by Heatilator.
a.
Unit Front/Back Width: 42-1/8 inches (1070 mm).
b.
Framing Front/Back Width: 43-1/8 inches (1095 mm).
c.
Unit Height: 40-3/4 inches (1035 mm).
d.
Framing Height: 41-1/4 inches (1048 mm).
e.
Unit Depth: 25 inches (635 mm).
f.
Framing Depth: 25 inches (635 mm).
g.
Fireplace Opening: 36 inches (914 mm) x 19-1/8 inches (486 mm).
E.
Multi-Sided Wood Fireplace:
1.
Fronts-Doors: Black Bi-fold Glass Door.
2.
Fronts-Doors: Brushed stainless Bi-fold Glass Door.
3.
Wood Mantels: As specified.
4.
Stone Surrounds: As specified.
5.
Cast Mantels: As specified.
6.
Mantel Shelf: As specified.
7.
Model ST36D as manufactured by Heatilator.
a.
Width: 40 inches (1016 mm).
b.
Height: 47-1/4 inches (1200 mm).
c.
Depth: 24 inches (610 mm).
d.
Firebox Opening: 36 inches (914 mm) x 20-7/8 inches (530 mm).
8.
Model ST42A as manufactured by Heatilator.
a.
Width: 47 inches (1194 mm).
b.
Height: 58-7/8 inches (1495 mm).
c.
Depth: 28 inches (711 mm).
d.
Firebox Opening: 42 inches (1067 mm) x 23 inches (584 mm).
F.
Icon Series Wood Fireplace:
1.
Fronts-Doors: Black Grand Vista.
10306-4
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
G.
Fronts-Doors: Bronze Grand Vista.
Fronts-Doors: Black Contour.
Fronts-Doors: Bronze Contour.
Fronts-Doors: Black DM Glass Door.
Refractory: Traditional Refractory.
Refractory: Herringbone Refractory.
Cast Mantels: As specified.
Mantel Shelf: As specified.
Model I60 as manufactured by Heatilator.
a.
Unit Front Width: 44-1/2 inches (1130 mm).
b.
Framing Front Width: 45-1/2 inches (1156 mm).
c.
Unit Back Width: 28-5/8 inches (727 mm).
d.
Framing Back Width: 45-1/2 inches (1156 mm).
e.
Unit Height with standoffs: 59-1/4 inches (1505 mm).
f.
Framing Height: 59-3/4 inches (1518 mm).
g.
Unit Depth: 27-1/2 inches 9699 mm).
h.
Framing Depth: 28 inches (711 mm).
i.
Firebox Opening: 36 inches (914 mm) x 28-1/2 inches (724 mm).
Model I80 as manufactured by Heatilator.
a.
Unit Front Width: 50-1/2 inches (1283 mm).
b.
Framing Front Width: 51-1/2 inches (1308 mm).
c.
Unit Back Width: 34-1/2 inches (876 mm).
d.
Framing Back Width: 51-1/2 inches (1308 mm).
e.
Unit Height with standoffs: 59-1/4 inches (1505 mm).
f.
Framing Height: 59-3/4 inches (1518 mm).
g.
Unit Depth: 27-1/2 inches (699 mm).
h.
Framing Depth: 28-1/2 inches (724 mm).
i.
Firebox Opening: 42 inches (1067 mm) x 28-1/2 inches (724 mm).
Model I100 as manufactured by Heatilator.
a.
Unit Front Width: 60-5/8 inches (1540 mm).
b.
Framing Front Width: 61-5/8 inches (1565 mm).
c.
Unit Back Width: 41-5/8 inches (1057 mm).
d.
Framing Back Width: 61-5/8 inches (1565 mm).
e.
Unit Height with standoffs: 70-1/2 inches (1791 mm).
f.
Framing Height: 71 inches (1803 mm).
g.
Unit Depth: 29-1/2 inches (749 mm).
h.
Framing Depth: 30-1/2 inches (775 mm).
i.
Firebox Opening: 50 inches (1270 mm) x 33 inches (838 mm).
Accelerator Wood Fireplace:
1.
Fronts-Doors: DM1736.
2.
Fronts-Doors: DM1742.
3.
Fronts-Doors: Black Grand Vista.
4.
Fronts-Doors: Bronze Grand Vista.
5.
Fronts-Doors: Black Contour.
6.
Fronts-Doors: Bronze Contour.
7.
Fronts-Doors: Black DM Glass Door.
8.
Fronts-Doors: Black Gasketed Doors.
9.
Refractory: Traditional Refractory.
10.
Refractory: Herringbone Refractory.
11.
Cast Mantels: As specified.
12.
Mantel Shelf: As specified.
13.
Model A36R/A36C as manufactured by Heatilator.
a.
Unit Front Width: 42 inches (1067 mm).
b.
Framing Front Width: 43 inches (1092 mm).
c.
Unit Back Width: 28-1/4 inches (718 mm).
10306-5
14.
H.
2.3
d.
Framing Back Width: 43 inches (1092 mm).
e.
Unit Height: 41-3/8 inches (1051 mm).
f.
Framing Height: 41-1/2 inches (1054 mm).
g.
Unit Depth: 22-3/4 inches (578 mm).
h.
Framing Depth: 23 inches (584 mm).
i.
Firebox Opening: 36 inches (914 mm) x 23-3/8 inches (594 mm).
j.
BTU/Hour Input: 100,000 (29.3 kW).
Model A42R/A42C as manufactured by Heatilator.
a.
Unit Front Width: 48 inches (1219 mm).
b.
Framing Front Width: 49 inches (1245 mm).
c.
Unit Back Width: 30-7/8 inches (784 mm).
d.
Framing Back Width: 49 inches (1245 mm).
e.
Unit Height: 41-3/8 inches (1051 mm).
f.
Framing Height: 41-1/2 inches (1054 mm).
g.
Unit Depth: 22-3/4 inches (578 mm).
h.
Framing Depth:23 inches (584 mm).
i.
Firebox Opening: 42 inches (1067 mm). x 23-3/8
j.
BTU/Hour Input: 100,000 (29.3 kW).
Element Wood Fireplace:
1.
Fronts-Doors: Black Bi-fold Glass Door.
2.
Fronts-Doors: Bronze Bi-fold Glass Door.
3.
Wood Mantels: As specified.
4.
Stone Surrounds: As specified.
5.
Cast Mantels: As specified.
6.
Mantel Shelf: As specified.
7.
Model Element 36 as manufactured by Heatilator.
a.
Unit Front Width: 41 inches (1041 mm).
b.
Framing Front Width: 42 inches (1067 mm).
c.
Unit Back Width: 23-3/4 inches (603 mm).
d.
Framing Back Width: 42 inches (1067 mm).
e.
Unit Height: 39-1/2 inches (1003 mm).
f.
Framing Height: 39-3/4 inches (1010 mm).
g.
Unit Depth: 21-3/8 inches (543 mm).
h.
Framing Depth: 21-1/2 inches (546 mm).
i.
Firebox Opening: 36 inches (914 mm) x 21 inches (533 mm).
j.
BTU/Hour Input: 100,000 (29.3 kW).
8.
Model Element 42 as manufactured by Heatilator.
a.
Unit Front Width: 47 inches (1194 mm).
b.
Framing Front Width: 48 inches (1219 mm).
c.
Unit Back Width: 29-3/4 inches (756 mm).
d.
Framing Back Width: 48 inches (1219 mm).
e.
Unit Height: 39-1/2 inches (1003 mm).
f.
Framing Height: 39-3/4 inches (1010 mm).
g.
Unit Depth: 21-3/8 inches (543 mm).
h.
Framing Depth: 21-1/2 inches (546 mm).
i.
Firebox Opening: 42 inches (1067 mm) x 21 inches (533 mm).
j.
BTU/Hour Input: 100,000 (29.3 kW).
MANUFACTURED OUTDOOR WOOD FIREPLACES
A.
Castlewood Wood Fireplace:
1.
Front-Door: Castlewood Glass Door available in bronze finish.
2.
Refractory: Traditional Refractory.
3.
Refractory: Herringbone Refractory.
4.
Log Set: Outdoor Grand Oak Logs.
10306-6
5.
Model Castlewood as manufactured by Heatilator.
a.
Unit Front Width: 52-7/8 inches (1343 mm).
b.
Framing Front Width: 53-7/8 inches (1368 mm).
c.
Unit Back Width: 37-1/8 inches (943 mm).
d.
Framing Back Width: 53-7/8 inches (1368 mm).
e.
Unit Height: 74-1/8 inches (1883 mm).
f.
Framing Height: 74-1/2 inches (1892 mm).
g.
Unit Depth: 27-1/2 inches (699 mm).
h.
Framing Depth: 28-3/8 inches (721 mm).
i.
Firebox Opening: 41-7/8 inches (1064 mm) x 38 inches (965 mm).
B.
Montana Wood Fireplace
1.
Durable stainless steel construction.
2.
Front-Door: Bi-fold door (DM1836S) in stainless steel chrome.
3.
Refractory: Traditional Refractory.
4.
Refractory: Herringbone Refractory.
5.
Log Set: Outdoor Realwood Logs.
6.
Montana Tile and Stucco: Refer to drawings.
7.
Model Montana-36 as manufactured by Heatilator.
a.
Unit Front Width: 42 inches (1067 mm).
b.
Framing Front Width: 43 inches (1092 mm).
c.
Unit Back Width: 25 inches (635 mm).
d.
Framing Back Width: 43 inches (1092 mm).
e.
Unit Height: 41-3/4 inches (1060 mm).
f.
Framing Height: 42-3/8 inches (1076 mm).
g.
Unit Depth: 23 inches (584 mm).
h.
Framing Depth: 24-1/8 inches (613 mm).
i.
Glass Size: 36 inches (914 mm) x 23-1/2 inches (597 mm).
j.
BTU/Hour Input: 61,000 (17.9 kW).
8.
Model Montana-42 as manufactured by Heatilator.
a.
Unit Front Width: 48 inches (1219 mm).
b.
Framing Front Width: 49 inches (1245 mm).
c.
Unit Back Width: 31 inches (787 mm).
d.
Framing Back Width: 49 inches (1245 mm).
e.
Unit Height: 41-3/4 inches (1060 mm).
f.
Framing Height: 42-3/8 inches (1076 mm).
g.
Unit Depth: 23 inches (584 mm).
h.
Framing Depth: 24-1/8 inches (613 mm).
i.
Glass Size: 42 inches (1067 mm) x 23-1/2 inches (597 mm).
j.
BTU/Hour Input: 61,000 (17.9 kW).
C.
Villawood Wood Fireplace:
1.
Stainless steel surround to accent decor.
2.
Front-Door: Bi-fold glass door with chrome finish top and bottom.
3.
Refractory: Traditional Refractory.
4.
Refractory: Herringbone Refractory.
5.
Log Set: Outdoor Realwood Logs.
6.
Model Villawood-36 as manufactured by Heatilator.
a.
Unit Front Width: 41 inches (1041 mm).
b.
Framing Front Width: 42 inches (1067 mm).
c.
Unit Back Width: 23-3/4 inches (603 mm).
d.
Framing Back Width: 42 inches (1067 mm).
e.
Unit Height: 39-1/2 inches (1003 mm).
f.
Framing Height: 36-3/4 inches (933 mm).
g.
Unit Depth: 21-3/8 inches (543 mm).
h.
Framing Depth: 21-1/2 inches (546 mm).
10306-7
7.
2.4
2.5
i.
Firebox Opening: 36 inches (914 mm) x 20-7/8 inches (530 mm).
Model Villawood-42 as manufactured by Heatilator.
a.
Unit Front Width: 47 inches (1194 mm).
b.
Framing Front Width: 48 inches (1219 mm).
c.
Unit Back Width: 29-3/4 inches 9756 mm).
d.
Framing Back Width: 48 inches (1219 mm).
e.
Unit Height: 39-1/2 inches (1003 mm).
f.
Framing Height: 36-3/4 inches (933 mm).
g.
Unit Depth: 21-3/8 inches 9543 mm).
h.
Framing Depth: 21-1/2 inches (54 mm).
i.
Firebox Opening: 42 inches (1067 mm) x 20-7/8 inches (530 mm).
OUTDOOR GAS LOG SET
A.
Fireside Grand Oak:
1.
Design: Eleven authentic-looking logs, molded from real oak timber, state-of-the-art,
tiered burner system shall create a multi-level fire. Hidden controls are easily
accessible and shall not detract from the fire's authenticity, and allow the log set to fit
centered in hearth.
2.
Burner: Matchlight (NG only).
3.
Burner: IntelliFire.
4.
Hearth kit provided.
5.
Control: Smart-Batt (On/off, temperature readout, thermostat mode, timer mode).
B.
Outdoor Fireside Realwood:
1.
Eight richly-detailed realistic log set. Stainless steel burner tube, grate and sand pan
burner, ,
2.
Hearth Kit:
3.
Burner: Matchlight (NG only).
4.
Burner: Remote-Ready Standing Pilot.
INDOOR GAS LOG SET
A.
Fireside Grand Oak:
1.
Designed to fill larger fireplaces. 11 authentic looking logs, molded from real oak
timber (12 logs on three-tiered 30 inches (762 mm)), state-of-the-art, tiered burner
system creates a multi-level fire. Hidden controls are easily accessible, won't detract
from the fire's authenticity, and allow the log set to fit perfectly centered.
2.
Burner: Matchlight (NG only).
3.
Burner: Safety Pilot.
4.
Burner: IntelliFire.
5.
Include burner and hearth kit.
6.
Remote Controls: Smart-Stat.
B.
Campfire:
1.
Recreates the natural look of a traditional campfire. Front log conceals and insulates
the controls so that the log set can burn with fireplace doors closed.
2.
Log Set: 18 inches (457 mm) sets have 10 fiber logs.
3.
Log Set: 24 inches (610 mm) sets have 10 fiber logs.
4.
Log Set: 30 inches (762 mm) set has 11 fiber logs.
5.
Log Set: 24 inches (610 mm) "see-through" version has 13 fiber logs to accommodate
multi-sided fireplaces.
6.
Remote Ready.
7.
Includes burner and hearth kit.
C.
Fireside Supreme Oak:
1.
Realistically detailed logs with the appeal of a fully charred, mature fire. 12 authentic-
10306-8
2.
3.
4.
2.6
looking logs, molded from real oak timber.
Hearth Kit:
Burner: Matchlight (NG only).
Burner: Remote-Ready Standing Pilot.
D.
Fireside Versawood
1.
Ingenious design provides two different looks: split log or full bark - just turn the front
logs around. The split log side gives you another option and a new flame experience.
11 authentic-looking logs, molded from real oak timber.
2.
Burner: Matchlight (NG only).
3.
Burner: Remote-Ready Standing Pilot.
E.
Fireside Realwood
1.
Eight richly-detailed logs.
2.
Burner: Matchlight (NG only).
3.
Burner: Remote-Ready Standing Pilot.
FIREPLACE MANTELS AND FIREPLACE SURROUNDS
A.
Wood Mantels and Surrounds as manufactured by Heatilator.
1.
Belair.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
2.
Bridgeport.
a.
Finish: Oak Chocolate.
b.
Finish: Oak Ginger.
c.
Finish: Oak Honey.
d.
Finish: Oak Natural.
e.
Finish: Primed wood fiber.
3.
Fairfield.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
4.
Hastings.
a.
Finish: Oak Chocolate.
b.
Finish: Oak Ginger.
c.
Finish: Oak Honey.
d.
Finish: Oak Natural.
e.
Finish: Primed wood fiber.
5.
Kenwood Corner.
a.
Finish: Maple Auburn.
10306-9
6.
7.
8.
9.
10.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Kenwood Corner with Base.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Kenwood Wall Cabinet.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Kenwood Wall Cabinet with Base.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Mount Vernon.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Newport.
a.
Finish: Oak Chocolate.
b.
Finish: Oak Ginger.
10306-10
11.
12.
13.
14.
c.
Finish: Oak Honey.
d.
Finish: Oak Natural.
e.
Finish: Primed wood fiber.
Philips Hall.
a.
Finish: Alder Auburn.
b.
Finish: Alder Chocolate.
c.
Finish: Alder Ginger.
d.
Finish: Alder Honey.
e.
Finish: Alder Natural.
f.
Finish: Maple Auburn.
g.
Finish: Maple Chocolate.
h.
Finish: Maple Ginger.
i.
Finish: Maple Honey.
j.
Finish: Maple Natural.
k.
Finish: Oak Chocolate.
l.
Finish: Oak Ginger.
m.
Finish: Oak Honey.
n.
Finish: Oak Natural.
o.
Finish: Primed wood fiber.
Plymouth.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Portico with Filler.
a.
Finish: Alder Auburn.
b.
Finish: Alder Chocolate.
c.
Finish: Alder Ginger.
d.
Finish: Alder Honey.
e.
Finish: Alder Natural.
f.
Finish: Maple Auburn.
g.
Finish: Maple Chocolate.
h.
Finish: Maple Ginger.
i.
Finish: Maple Honey.
j.
Finish: Maple Natural.
k.
Finish: Oak Chocolate.
l.
Finish: Oak Ginger.
m.
Finish: Oak Honey.
n.
Finish: Oak Natural.
o.
Finish: Primed wood fiber.
Portico without Filler.
a.
Finish: Alder Auburn.
b.
Finish: Alder Chocolate.
c.
Finish: Alder Ginger.
d.
Finish: Alder Honey.
e.
Finish: Alder Natural.
f.
Finish: Maple Auburn.
g.
Finish: Maple Chocolate.
h.
Finish: Maple Ginger.
i.
Finish: Maple Honey.
10306-11
15.
16.
17.
18.
19.
j.
Finish: Maple Natural.
k.
Finish: Oak Chocolate.
l.
Finish: Oak Ginger.
m.
Finish: Oak Honey.
n.
Finish: Oak Natural.
o.
Finish: Primed wood fiber.
Portico with Filler Painted.
a.
Finish: Alder Auburn.
b.
Finish: Alder Chocolate.
c.
Finish: Alder Ginger.
d.
Finish: Alder Honey.
e.
Finish: Alder Natural.
f.
Finish: Maple Auburn.
g.
Finish: Maple Chocolate.
h.
Finish: Maple Ginger.
i.
Finish: Maple Honey.
j.
Finish: Maple Natural.
k.
Finish: Oak Chocolate.
l.
Finish: Oak Ginger.
m.
Finish: Oak Honey.
n.
Finish: Oak Natural.
o.
Finish: Primed wood fiber.
Roseville.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Sonoma.
a.
Finish: Alder Auburn.
b.
Finish: Alder Chocolate.
c.
Finish: Alder Ginger.
d.
Finish: Alder Honey.
e.
Finish: Alder Natural.
f.
Finish: Maple Auburn.
g.
Finish: Maple Chocolate.
h.
Finish: Maple Ginger.
i.
Finish: Maple Honey.
j.
Finish: Maple Natural.
k.
Finish: Oak Chocolate.
l.
Finish: Oak Ginger.
m.
Finish: Oak Honey.
n.
Finish: Oak Natural.
o.
Finish: Primed wood fiber.
Winchester.
a.
Finish: Oak Chocolate.
b.
Finish: Oak Ginger.
c.
Finish: Oak Honey.
d.
Finish: Oak Natural.
e.
Finish: Primed wood fiber.
Yorktown.
10306-12
20.
a.
Finish: Oak Chocolate.
b.
Finish: Oak Ginger.
c.
Finish: Oak Honey.
d.
Finish: Oak Natural.
e.
Finish: Primed wood fiber.
Parsons.
a.
Finish: Alder Auburn.
b.
Finish: Alder Chocolate.
c.
Finish: Alder Ginger.
d.
Finish: Alder Honey.
e.
Finish: Alder Natural.
f.
Finish: Maple Auburn.
g.
Finish: Maple Chocolate.
h.
Finish: Maple Ginger.
i.
Finish: Maple Honey.
j.
Finish: Maple Natural.
k.
Finish: Oak Chocolate.
l.
Finish: Oak Ginger.
m.
Finish: Oak Honey.
n.
Finish: Oak Natural.
o.
Finish: Primed wood fiber.
B.
Stone Surround Sets
1.
Absolute Black Granite.
2.
Beige Marble.
3.
Caledonia Granite.
4.
Green Granite.
5.
Marron Brown Marble.
6.
New Venetian Granite.
7.
Slate.
8.
Tan Brown Granite.
9.
Wheatfield Granite.
C.
Cast Mantels and Surrounds:
1.
Atlas.
2.
Avalon.
a.
Finish: Beige.
b.
Finish: Macchiato.
3.
Avalon with Overmantel.
a.
Finish: Beige.
b.
Finish: Macchiato.
4.
Biltmore.
a.
Finish: Beige.
b.
Finish: Macchiato.
5.
Biltmore with Overmantel.
a.
Finish: Beige.
b.
Finish: Macchiato.
6.
Hearst.
a.
Finish: Beige.
b.
Finish: Macchiato.
7.
Hearst with Overmantel.
a.
Finish: Beige.
b.
Finish: Macchiato.
D.
Mantel Shelves:
1.
Length: 48 inches (1219 mm)."
10306-13
2.
3.
4.
5.
6.
2.7
Length: 59 inches (1499 mm).
Length: 72 inches (1829 mm).
Bennington.
a.
Finish: Maple Auburn.
b.
Finish: Maple Chocolate.
c.
Finish: Maple Ginger.
d.
Finish: Maple Honey.
e.
Finish: Maple Natural.
f.
Finish: Oak Chocolate.
g.
Finish: Oak Ginger.
h.
Finish: Oak Honey.
i.
Finish: Oak Natural.
j.
Finish: Primed wood fiber.
Covington.
a.
Finish: Oak Chocolate.
b.
Finish: Oak Ginger.
c.
Finish: Oak Honey.
d.
Finish: Oak Natural.
e.
Finish: Primed wood fiber.
St Cloud.
a.
Finish: Oak Chocolate.
b.
Finish: Oak Ginger.
c.
Finish: Oak Honey.
d.
Finish: Oak Natural.
e.
Finish: Alder Auburn.
f.
Finish: Alder Chocolate.
g.
Finish: Alder Ginger.
h.
Finish: Alder Honey.
i.
Finish: Alder Natural.
j.
Finish: Maple Auburn.
k.
Finish: Maple Chocolate.
l.
Finish: Maple Ginger.
m.
Finish: Maple Honey.
n.
Finish: Maple Natural.
o.
Finish: Primed wood fiber.
FIREPLACE ACCESSORlES
A.
Termination Caps: Wood.
B.
Circulating Fans: Manufacturer's standard circulating fan compatible with specified fireplace.
PART 3 EXECUTION
3.1
3.2
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect of
unsatisfactory preparation before proceeding.
PREPARATION
A.
Clean surfaces thoroughly prior to installation.
B.
Prepare surfaces using the methods recommended by the manufacturer for achieving the
best result for the substrate under the project conditions.
10306-14
3.3
3.4
3.5
INSTALLATION
A.
Install in accordance with manufacturer's instructions, ANSI Z21.44 and the requirements of
authorities having jurisdiction.
B.
Use manufacturer's guidelines for minimum clearances to combustibles, walls, and finishes.
C.
Anchor all components firmly in position for long life under hard use.
FIELD QUALITY CONTROL
A.
Upon completion of installation, visually inspect all exposed surfaces. Touch up scratches
and abrasions with touch-up paint recommended by the manufacturer, make imperfections
invisible to the unaided eye from a distance of 5 feet (1.5m).
B.
Test for proper operation, control and safety devices.
C.
Complete Installer's Warranty Validation Card.
PROTECTION
A.
Protect installed products until completion of project.
END OF SECTION
10306-15