RESUME
Personal:
Name, Surname
Nationality
Marital Status
Address (home)
Address (work)
Tel (work/cell)
e-mail
: Baki Koyuncu
: Turkish / Australian
: Married
: Hürriyet Street, No: 19 / 9, Sokullu,
Ankara, Turkey
: Computer Engineering Dept , Ankara
University, Golbasi, Ankara,Turkey
: 90 312 380 03 53 - 90 0542 268 33 60
: bkoyuncu@ankara.edu.tr
Educatıon:
University : Electronics Eng ,Middle East Technical University,1968-69, Turkey
College : London Paddington College , 1969-70, UK
BSc
: Electronics Eng, Birmingham University,1970-73, UK
MSc
: Information and Systems Eng, Birmingham University, 1973-75,UK
PHD
: Electronics/computer Eng, Loughborough University,1977-81,UK
BSc Thesis :
Development of an 8 octave Electronic Piano(UK)
MSc Thesis:
Data and noise management by using Phase Lock loop techniques in ATSF Digital
satellite communications . (UK)
PhD Thesis:
Determination of surface vibration patterns of Piezoelectric transducers by using
digital image processing and computer interfacing techniques (UK)
Postdoctorate:
Development of Computer methods to analyse the liquid surface parameters by using
photon correlation techniques (UK)
Honours:
New York Academy of Science (USA)
Who’s Who (14th chapter ) (USA)
Prizes :
- Tubitak Science Encouragement prize (European Enviromental Pollution Project),2004
- Tübitak Science Encouragement prize (European Robotics Project), 2004
- Ankara University Engineering Faculty Science prize , 2005
- Ankara University Engineering Faculty Science prize , 2005
Scholarships :
College Education (Turkish government)
BSc Education (Turkish government)
MSc Education (Turkish government)
PHD Education ( UK government)
Visiting Research Grants (USA ,UK)
Memberships :
MIEEE : Senior Member, IEEE (USA)
MIEE : Member, IEE (UK)
CENG : Professional Engineer (UK)
CPHYS : Professional Physicist (UK)
MInsP : Member, Physics Institution (UK)
MAeng : Member, Engineering Board (Australia)
Editorial Board :
1) Int Journal of Electrical ,electronics and computer engineering (IJEECE)
2) Int conf. on comp. intelligence , communication systems and networks(CICSYN)
Referee duties :
1) European Commission Services (ECS)
2) Istanbul technokent
3) Int conf on research in computational intelligence and comm. networks (ICRCICN)
4) Int conf on communication systems and network technologies
5) EDAS conference services
Academic Experience:
1. July 2012 - July 2015 :
Professor and lecturer, Computer Eng Dept, Ankara University,Ankara, Turkey
2. October 2003 – June 2012:
Professor and chairman, Computer Engineering Dept, Ankara University, Ankara,Turkey
3. October 2002 – October 2011:
Professor and Chairman, Informatics Dept, Ankara University, Ankara,Turkey
4. August 2001 – September 2002:
Professor and Chairman, Computer Engineering Dept, Pamukkale University,
Denizli,Turkey
5. August 1999 – August 2001:
Professor and Chairman, Computer Engineering Dept, Baskent University,
Ankara,Turkey
6. August 1997 – August 1999:
Professor and Chairman, Computer Engineering Dept, Çankaya University,
Ankara,Turkey
7. June 1996 - August 1997:
Professor and Chairman, Electronic Engineering Dept, Çukurova University,
Adana,Turkey
8. February 1994 - August 1997:
Assoc Prof , Electronics and Physics Dept , Kuwait University, Kuwait
9. July 1990 – February 1994:
Assoc Prof, Electrical and Electronic Engineering Dept, Kral Fahd Üniversity,
Dhahran, Saudi Arabia
10. September 1984 – July 1990:
Ast Prof, Electronics and Physics Dept, Kuwait University, Kuwait
11. January 1983 - September 1984:
Research Fellow., Electronics and Physics Dept, Queen's University, Belfast , UK
12. July 1981 - january 1983:
Project Manager, Research Dept, Testaş, Ankara,Turkey
13. September 1976 - October 1977:
Research Engineer, Delta International Inc., Electronics Dept, Birmingham, UK
14. December 1974 - September 1976:
Research Engineer, Nottingham University, Electronics Engineering Dept, UK
Administrative experience:
1. July 2012 - July 2015 :
Erasmus Coordinator
2. October 2003 – June 2012 :
- Chairman, Computer Engineering Department, Ankara University
- Member of Engineering Faculty board,
- Member of Engineering Faculty executive board (since 2007)
- Member of Graduate school board
- Member of Distance education board Member of Continuous education board
3. January 2007 – June 2010 :
Director, TOEFL examination centre ( STN12250 A and STN12250 B centres)
4. September 2004 – June 2010 :
Director, Pension plan centre examination board
5. October 2002 -2010:
Informatics coordinator, Ankara University, Ankara, Turkey
6. August 2001 – September 2002:
- Chairman Computer Eng dept , Pamukkale University, Denizli ,Turkey
- Member of Faculty board,
- Member of Faculty Administration Board
7. August 1999 – August 2001:
- Engineering Faculty Acting Dean ,Başkent University, Ankara,Turkey
- Chairman Computer Engineering Dept ,
- Member of Faculty board,
- Member of Faculty Administration Board
- Member of University Senate
8. August 1997 – August 1999:
- Chairman, Computer Eng Dept , Çankaya University, Ankara, Turkey
- - Member of Faculty board,
- Member of Faculty Administration Board
- Member of University Senate
9. June 1996 – July 1997:
Chairmanship, E&E Engineering Dept , Çukurova University, Adana, Turkey
10. February 1994 - July 1997:
Administrative committee memberships, Kuwait University, Kuwait
11. September 1990 - January 1994:
Administrative committee memberships, King Fahd University, Saudi Arabia
12. September 1984 – July 1990:
Administrative committee memberships, Kuwait University, Kuwait
13. September 1984 – September 1989:
Technical Consultancy, Mubarak Hospital, Kuwait
14. September 1987 – September 1989:
Part time researcher, KSIR Research Institute, Kuwait
15. February 1983 – September 1984:
Full time warden, Student Halls of residence, Queens University, UK
16. September 1983 – September 1984:
Research Fellow, Queens University, UK
17. September 1977- June 1980:
Research Assistant, Loughborough University, UK
18. December 1975 – December 1976
Sub warden, Nottingham University Halls of residences
19. June 1975 - December 1975 :
Military Service, Army Communication Academy, Ankara, Turkey
Projects (After MSc and PhD):
1. March 2013 – present
- Hand palm print identification by using image processing techniques
- Retina identification by using image processing techniques
2. January 2012 – March 2013
Localization by using wireless sensor networks and GPS +GPRS techniques
3. April 2011 – December 2012 :
Real time Indoor Position detection by using RFID devices
4. April 2010 – April 2012:
Computer simulation of eye retina disorders by using Zernike polynomials
5. January 2008 - June 2011:
Setting up Computer faculty in kabul Polytechnic University, Afghanistan
6. January 2009 – March 2010:
Construction of 3D laser scanner to visualize 3D objects,
7. December 2007 – December 2008:
Airborne visual identification of land objects by using pilotless model aircraft,
8. November 2005 – November 2007:
Setting up and operating a parallel processor unit with 16 nodes,
9. October 2003 – October 2005:
- Determination of sub surface cracks by using thermal simulation and Numeric
Analysis Techniques, Ankara University, Ankara, Turkey
- Presentation of Anatolian Museum by using virtual reality and multimedia
techniques
10. October 2002 – October 2003:
Dynamic motion detection on metal surfaces by using digital image processing
techniques
11. August 2001 – September 2002:
- Development of Visual hotel management software,
- Development of Visual student course and time-table software,
- Development of archaeological site simulation, Pamukkale University, Turkey
12. August 1997 – August 2001:
- Intelligent Hospital information management system
- Simulation of 3D robot arm, Başkent University, Turkey
13. June 1994 - August 1997:
Determination of Ocean surface waves by using digital image processing
techniques, Kuwait University, Kuwait
14. May 1993 - June 1994:
Quantizing the amount of rust on metal surfaces by using digital image
processing techniques, King Fahd University, Saudi Arabia
15. January 1992 - May 1993:
Determination of capillary waves on ocean surfaces by using remote sensing
and image processing techniques, King Fahd University, Saudi Arabia
16. January 1990 - July 1990:
Determination of sub surface cracks by using thermal simulation and Numeric
analysis techniques, Kuwait University, Kuwait
17. September 1988- September 1989:
Identification of oil spills on ocean surfaces by using remote sensing and Lidar
techniques, KISR Institute, Kuwait
18. January 1987 – December 1989:
Identification of sub surface features in solids by using Photo Acoustic image
processing techniques, Kuwait University, Kuwait
19. January 1986 - December 1986:
Determination of dynamic heart motion by using Ultrasonic techniques,
Mubarak Hospital, Kuwait
20. September 1984 - December 1986:
Development of a computer interfaced video system to display the sub surface
features of metals, Kuwait University, Kuwait
21. January 1983 - September 1984:
Investigation of Liquid surfaces by using Photon correlation techniques,
Queens University, Belfast, UK
22. May 1982- January 1983:
Development of Laser distance finder, Testaş R&D, Ankara ,Turkey
23. July 1981- May 1982 :
Development of military EM interference filters, Testaş R&D, Ankara, Turkey
24. December 1974 - September 1976:
Computer simulation of EM wave patterns in Microwave cavities,
Nottingham University, UK
25. September 1976 – October 1977:
Design and development of security systems, R&D on alarm systems ,
Delta International, Birmingham, UK
Visiting Researcher :
1. July 1993 - September 1993:
Surface metrology research, Manchester University, UK
2. July 1990 – September 1990:
NDT research, Tubitak Research Institute, Gebze, Turkey
3. August 1986 - September 1986:
Subsurface image processing research, Bowling Green University, USA
4. June 1986 - August 1986:
Photo Acoustic image processing research, Wayne State University, USA
Books :
“Piezoelectric Transducers and Their Applications”,
Elsevier Publishing Company, Holland, 1985
Industrial Projects (Consultancy):
1. Turk Tractor Ltd 2013-2015
Position determination of tractors by using RFID and audio visual techniques.
2. Gelisim technique Ltd 2012-2014
CAD supported software development for environmental planning and landscape
design
3. Tektronik Engineering Ltd 2010 – 2012
Development of Multipurpose command and control systems
4. Altıgen Informatics and software Ltd 2005—2007
3D simulation of military exercises with computers by using Artificial Intelligence and
graphic techniques
5. Ayment Computer Ltd 2004--2007
To design and construct model casts for most efficient pattern cutting in textile
industry
Conference Organization:
1. October 2006
3rd International Bulgarian – Turkish Computer science Conf, Istanbul, Turkey
2. May 2002
Information and computer applications, Pamukkale University, Denizli, Turkey
3. May 1992
Electromagnetic Applications, Çukurova University, Adana, Turkey
Conferences Attended:
1. 21 March – 24 march 2015:
International conference on advances in engineering science 1 paper, ICAESAM’ UK
2. 22 March – 26 march 2014:
International conference on research and technology,1 paper, ICRSET’ Dubai
3. 14 July – 15 July 2006
6th data mining Congress, 1 poster, ICDM 2006, Leipzig, Germany
4. 14 October – 17 October 2004 :
Complexity and Modeling of Biological networks, Braunschweig, 1paper , Germany
5. 7 October - 10 October 2003:
Information Technology Conference , 1 paper , Ege University, İzmir, Turkey
6. 24 September - 26 September 2003:
Signal processing Conference, 1 paper , 18 Mart University, Çanakkale ,Turkey
7. 4 May - 6 May 2002:
Information and computer applications conference, 2 poster, Pamukkale
University, Denizli, Turkey
8. 15 November –17 November 2000:
10.th Computer applications Conference, 1 paper, Lefke University, N. Cyprus
9. 15 October –16 October 1998:
2.nd Turkish – German computer applications conference 1 paper,
Justus-Liebig University / Selçuk University, Konya, Turkey
10. 6 July – 12 July 1997:
4th International Composite materials conference, ICCE/4, 1 paper, Hawaii, USA
11. 12 February – 15 February 1996:
Automatic control and computer applications conference, 1 paper, Ege
University, Izmir, Turkey
12. 15 January – 22 January 1995:
Laser and computer application conference, 1 paper, Kuwait University, Kuwait
13. 20 November –25 November 1995:
Remote sensing of oil spills conference, 1 paper, KISR Institute, Kuwait
14. 10 April – 13 April 1993:
Industrial computer control conference, 1 paper, King Fahd University,
Dhahran, Saudi Arabia
Publications: (SCI /SCIEXP are in red)
78. Koyuncu.H., Koyuncu. B
A Real Time Application of Active Rfids in Multicar Environment for Road Safety, Int.
Journal of Research studies in Computer science and engineering , IJRSCSE ,
Vol 2, Issue 9, pp 24 – 28 , September 2015
77. Koyuncu.B., Koyuncu. H
A precision Motion control of a circular platform by using Stepper Motors, Int.
Journal of Electronics Communication and computer engineering , IJECCE ,
Vol 6, Issue 5, pp 508-601 2015
76. Koyuncu.B., Koyuncu. H
Intelligent Hospital Management System (IHMS) , 7th Int. Conference .on
Computational Intelligence and communication networks, CICN 2015
submitted
75. Koyuncu.B., Gokce.A , Panahi.P
Introduction of unity game engine in reconstruction of an archaeological site,
2015 IEEE Int. Conference on research in computational intelligence and
Communication Networks, ICRCICN 2015 , submitted
74. Koyuncu.B., Gokalp.Y
Hand palm Identification by using image processing techniques, Int.
journal of emerging technology and advanced engineering ISSN 22502459, Iso9001:2008 , Vol 5, Issue 7, pp 508-512, July 2015
73. Koyuncu.B., Panahi.P,Varlıoglu.S
Comparative indoor localization by using landmark and cricket systems,
Int. journal of emerging technology and advanced engineering ISSN 22502459, Iso9001:2008 , Vol 5, Issue 6, pp 453-456, June 2015
72. Koyuncu.B., Meral.E, Panahi.P
Real time Geolocation tracking by using GPS+GPRS and Arduino based
SIM908, Int. journal of electronic circuits and systems, (IIJECS), ISSN
(Online) 2277 – 5870, 2015,Vol 4,issue 2, pp 148-150, July 2015.
71. Koyuncu.B., Koyuncu.H. Celik.T,Varlıoglu.S
Distance calculations by using Bi-section algorithm with RFID signals,
Int. conference on advances in engineering sciences and applied
mathematics (ICAESAM’15), pp 87 – 90 , March 2015, London ,UK
70. Koyuncu.B., Gokce.A, Panahi.P
Reconstruction of an archaeological site in real time domain by using
software techniques , 5th Int. conference on communication system and
network technologies, (IEEE CSNT), pp 1350-1354, 2015
69. Koyuncu.B., Masti .S
3D reconstruction of human skulls by using Tomography images, Int.
Journal of computing, (IJC) , Vol 5 ,issue 1, ISSN 2231-2153, pp 48- 50,
2015
68. Koyuncu.B., Panahi .P
Kalman Filtering of Link Quality Indicator values for position detection by
using WSNS, Int. Journal of
computing, communication &
instrumentation Eng. (IJCCIE) , Vol 1 ,issue 1, 2014 , ISSN 2349-1469,
pp 129- 133
67. Koyuncu,B., Varlıoglu.S
Application of Elliptic Filtering to reduce Random variations of recorded LQI values
with WSNs, 2nd Int. Conference on research and technology ,ICRSET’ 2014 , March
21-22, 2014 Dubai(UAE) , pp 15-19
66. Koyuncu,B., B. Ugur, Panahi,P
Indoor location determination by using RFIDs ,IJMAN, Int. journal of
mobile and Adhoc Networks , Vol 3, issue 1, 2013, ISSN (Online)
2231:6825
65. Koyuncu, B., Kocabaşoğlu.P
Identification of corneal aberrations by using computer techniques , IJCES ,
int ,journal of comp and eng science , Vol 2 ,issue 3, pp 9-16, 2012 ,ISSN
2250:3439
64. Koyuncu,B. , Iankov, K., Vaptzarov.P
Graphical representation of Radar Data from on line meteorological objects,
ICASTOR Journal of Engineering, Vol 5 , No 2(20) , pp 61-75 , ISSN – 0974–
407X, 2012
63. Koyuncu,B.,Kullu .K
3D surface reconstruction of objects by using stereoscopic viewing , ICASTOR Journal
of Engineering. Vol 3 , No 3, pp 257-268 , ISSN – 0974–407X, 2010
62. Koyuncu, B., G. Bostancı:
3D battle field modelling and simulation of war games , International journal of
Computers , ıssue 1, volume 4 , 2010 , pp 1- 8
61.Koyuncu,B.,Kullu .K
Development of an optical 3D scanner based on structured light ,9th WSEAS
Int.Conf.on
Artificial Intelligence, Knowledge Engineering and data bases
(AIKED’10), 2010, pp 17-22 ISBN 978-960-474-154-0
60. Koyuncu, B., Kocabaşoğlu .K
Simulation of Corneal Aberrations by using Zernike Polynomials ,Sensors, signals,
visualization, imaging, simulation and materials, 2009, pp 174 - 178 , ISBN 978-960474-135-9
59. Koyuncu, B., G. Bostancı
Using Web Services to Support Battlefield Visualization and Tactical Decision
making, International Conference on computer modelling and Simulation ,
CSSIM 2009 , pp 138-141, IEEE, Brno, 2009
58.Koyuncu,B., G. Bostancı:
Using Lancaster combat models to aid battlefield visualization , 2nd IEEE International
Conference on Computer Science and Information Technology, ICCSIT,pp. 290292, China, 2009
57. Koyuncu, B., G. Bostancı:
A scenario based Virtual Military Sandbox implementation Using web services,
International Conference on Advanced Computer Control ,IEEE -ICACC-2009,
Singapore 2009 , pp 767-771
56. Koyuncu, B., G. Bostancı:
Development of a software tool for decision making in combat models ,
International Journal of Mathematics and Computation , IJMC, Vol 2, No M09
CESER 2009, pp 106 - 114, ISSN 0974-5718
55. Koyuncu, B., R. Kelebek:
E-Bay Shopping site , 5th international conference on electrical and
computer systems , EECS-08, November 2008 , pp 69-71
54. Koyuncu, B., E. Özcan:
Intelligent motion by using mobile robot arm +video unit, 5th international
conference on Electrical and computer systems , EECS-08 , November 2008 ,
pp 23-25
53. Koyuncu, B., G. Bostancı:
Terrain visualization using TerraGen,3D Studio Max and open GL, International
joint seminar in Engineering (IJSE) , August 2008 , pp 205-209
52. Koyuncu, B, Akdogan F:
Reconstruction of facial images by using facial motion and image processing
techniques, Journal of X-ray Science and Technology, Journal of x-ray Science
and technology JXRST, 2008, pp 159- 169
51. Koyuncu,B.,M.Güzel:
A visual Tool for Kinematics Analyses of Lynx-6 Robot Arms together
with dynamic modelling of dc motors ,International conference on
Automation, Robotics and control systems, arcs-08 ,July 2008, pp 145150 ISBN 978 1-60651-001-8
50. Koyuncu,B.,M.Güzel:
Software Analysis of Lynx 6 Robot Arm , International conference on
Automation, Robotics and Control systems , arcs-08 , July 2008, proceedings ,
pp 1-8, ISBN 978-1-6065
4 49. Koyuncu, B., A. Avanos:
Learning management system (LMS) , 2nd İstanbul informatics conference ,
June 2008 , Conference Proceedings pp 113-120.
48 Koyuncu,B., P.Kocabaşoğlu:
Virtual Campus ,Multimedia systems and signal Processing proceedings of
8th WSEAS, April 2008 , pp280 – 284
46. 47. Koyuncu,B., P.Kocabaşoğlu:
Virtual Campus , International Journal of Computers ıssue 4 ,volume 1, 2007,
April 2008, pp280 – 284
45x. 46. Koyuncu,B., M. Secir:
Student time table by using graph coloring algorithm, 5th International
conference on electrical and electronics engineering , Dec 2007, Eleco 2007,
pp 1-5
45. Koyuncu, B., G. Bostancı:
Development of an image processing software. Computer Engineering Journal,
Vol 1 , No 2 , 2007, pp 54-57
44 44. Koyuncu, B., M. Güzel:
Software development for the Kinematic analysis of a Lynx 6 Robot arm.
Proceedings of world Academy of Science ,Engineering and Technology ,
WAEST Vol 24, 2007 , pp 252-257
43 43. Koyuncu, B., M. Güzel:
Chess board application of 6 axes robot arm by using inverse
kinematics Equations. Computer Engineering , Vol 1 , No 1 , 2007 ,
pp 59-67
42. Koyuncu, B., G. Bostancı:
Virtual reconstruction of an ancient site: Ephesus. 1st International Congress of
Euroasian Archaeology, Soma Proceedings, SOMA proceedings 2007, pp
233- 236 Archaeopress UK
41. Koyuncu, B., A. Pahsa:
A comparative approach for contour detection of brain tumours by using image
correlation techniques on Tomography images. 6th WSEAS international
conference on Applications of Electrical Engineering AEE’07 , 2007
,proceedings pp 251-255 ISBN 978-960-8457-71-3
40. Koyuncu, B., A. Pahsa:
Radiation dosimetry detection system to generate brain tumour contour
images. Health Informatics and Bioinformatics (HIBIT), 2007 , ISBN
978-975-429-257-2
39. Koyuncu, B., A. Pahsa:
Contour profiling of brain tumours by using perceived brightness
information and image Correlation techniques. International Conference
on Artificial Intelligence and Pattern Recognition, AIPR, 2007,
proceedings pp50-52 , ISBN: 978-0-9727-412-3-1
38. Koyuncu, B., A. Pahsa:
Generating contours of brain tumour images by using their optical density
information and Image correlation techniques, Journal of X-ray Science and
Technology, JXRST, v. 15, no.1, pp. 1-7, 2007
37. Koyuncu, B., A. Pahsa:
3D visualization of brain slices by using computer techniques, Industrial
Conference on Data Mining, Poster, Proceedings, ICDM, 2006 , pp 127-134 ,
ISSN 1617-2671
36. Koyuncu, B., A. Pahsa:
Contour profiling of brain tumour areas by using image correlation and peak
detection techniques. International Journal of Computer Science and Network
Security, IJCSNS, v. 6, no. 11, p. 46 - 48, 2006 , ISSN: 1738-7906
35. Koyuncu, B., A. Pahsa:
3D visualization of brain slices by using computer techniques, 15th Turkish
Symposium on Artificial Intelligence and Neural Networks, TAINN, p. 25 32, 2006
34. Koyuncu, B.:
33.
32.
31.
30.
29.
2
28.
27.
26.
25.
24.
23.
22.
21.
20.
19.
Current mode dual – input integrator and differentiator using current conveyors.
Neu-cee Proceedings, pp. 66- 68, 2004
Koyuncu, B.:
Automatic control of a laser platform by using quadrant detection technique,
Neu-cee Proceedings , pp 164 – 167, 2004
Koyuncu, B.:
Determination of in-plane surface displacements of objects by using speckle
correlation and image processing techniques. ITAF Proceedings on
Information Technology, p. 243 – 251, 2003
Koyuncu, B.:
Ultrasonic flaw detection by using PC based correlation techniques, ICSP
Proceedings on Signal Processing ,E009, ISSN 1304-2386, v. 1, no. 2 , p. 35-37,
2003
Koyuncu, B., M. Ashraf:
Wave amp & freq measurements on water surfaces by using stereo
imaging techniques, SPIE Proceedings, p. 40 – 54, 1996
Koyuncu, B.:
Quantization of surface waves in an experimental water tank by using
image processing techniques, SPIE Proceedings, p. 536 – 545, 1996
Koyuncu, B., A. Nasser:
Real time wave amplitudes measurements by using on line computer
techniques, J. Phys Measurement Science & Tech., no. 7, p. 1-4, 1996
Koyuncu, B., A. Yasin, A. Nasser:
Quantization of surface rust by using laser imaging techniques,
Optics & Lasers Technology, v. 27, no. 3, p. 199-204, 1995
Koyuncu, B.:
Heart pulse rate monitor, Electronics World, p. 605-607, 1995
Koyuncu, B.:
PC remote control of appliances by using telephone lines, IEEE Trans.
on Consumer Electronics, v. 41, no. 1, p. 201- 209, 1995
Koyuncu, B., A. N. Abu Rezq:
Application of finite diff. method to determine the subsurface
discontinuities in metals, Laboratory Microcomputer, v. 13, no. 1, p. 2934, 1994
Koyuncu, B.:
A Laser quadrant detection technique for Capillary wave measurements,
Optics and Lasers in Engineering. V 22, pp. 53-64, 1995
Koyuncu, B.:
Computer simulation of subsurface features in opaque solids, Laboratory
Microcomputer, v. 11, no. 4, p. 151-157, 1994
Koyuncu, B.:
PC based ultrasonic flaw measurement by using random signal
correlation technique, Laboratory Microcomputer, v. 12, no. 2, p. 6368, 1993
Koyuncu, B., K. Bala:
A fast algorithm for detecting the phase angle and power factor. Laboratory
Microcomputer, v. 12, no. 2, p. 45- 51, 1993
Koyuncu, B., K. Bala:
An intelligent multi-level phase shifter. Laboratory Microcomputer, v. 12,
no 1, p. 13-15, 1993
1 18. Koyuncu, B., K. Bala:
A novel flow rate measurement technique using microprocessors,
Laboratory Microcomputer, v. 10, no 4, p.151-153, 1991
17. Koyuncu, B., K. Bala:
Microprocessor controlled automatic Sun Tracker, IEEE Transactions
on Consumer Electronics, v. 37, no. 4, p. 913-917, 1991
16. Koyuncu, B.:
Theoretical determination of temperature distributions for non-destructive
depth profiling of opaque solids, Optics and Lasers in Engineering, v. 14, no.
5, pp. 23-29, 1990
15. Koyuncu, B.:
Photoacoustic imaging of subsurface features in metals, Optics & Lasers in
Engineering, Vol 13, no 1, p. 17-26, 1990
14. Koyuncu, B.:
Photoacoustic signal detection technique by using gated vector lock-in amplifier,
Optics and Lasers inEngineering, v. 12 , p. 203-211, 1989
13. Koyuncu, B.:
Software development for the 8085 microprocessor based data logger,
Laboratory Microcomputer, v. 9 , p. 15-22, 1989
12. Koyuncu, B.:
A microcomputer system based on 8085 microprocessor for data logging
and processing, Laboratory Microcomputer, v. 7, no. 4, pp 137-144, 1988
11. Koyuncu, B., Farhat, A.:
Data acquisition using a vector lock-in amplifier and a mechanical scanner
interfaced to a PC, Laboratory Microcomputer, v. 7, p. 96 – 102, 1988
10. Koyuncu, B.:
Computer controlled acoustic generator, Elector Electronics, v. 14, no. 155,
1988, p. 28-33, 1988
9. Koyuncu, B.:
3D plotting of photo acoustic data using a microcomputer interfaced to a
mechanical scanner, Laboratory Microcomputer, v. 6, no. 4, p. 171-175, 1987
8 8. Koyuncu, B.:
Resonant characteristics of Pzt-4 transducers for photo acoustic signal
detection, Optics and Laser Technology, v. 19, no. 5, p. 265-268, 1987
7 7. Koyuncu, B.:
Measurements of ventricular distances using ultrasonic techniques,
Elektor Electronics, v. 13, no.148, p. 31-34, 1987
6. Koyuncu, B.:
A study of Pzt-4 transducer surface motions related to their underwater
far field beam patterns, Acoustic Letters, v.10, no. 4, p. 51-58, 1986
5. Koyuncu, B.:
Computer controlled laser Nephelometer, Laboratory Practice, v. 35, no. 11, p. 72-73,
1986
4. Koyuncu, B., Earnshaw, J.:
Semi-automatic determination of scattering vector in Small Angle Light
Scattering. J Phys E Sci Instrum., v. 18, p. 830-833, 1985
3.
3. Koyuncu, B., Earnshaw, J.:
Vib
Vibration isolation for Laser Light Scattering from liquid surfaces. J Phys EE,
Sci Instrum., v. 18, p. 396-398, 1985
2.
2. Koyuncu, B.:
The
The investigation of high frequency vibration modes of PZT transducers
using ESPI Techniques. Optics and Lasers in Eng. v.1, p. 37-49, 1981
1.
1. Koyuncu, B., Cooksoon, J.:
Sem
Semi-automatic measurements of Small High Frequency Vibrations Using
Time Averaged ESPI. J Phys E, Sci Instrum, v. 13, p. 206-208, 1980
Course Books + Laboratory manuals written:
1. Circuit Theory, 1984
2. Digital Logic Design, 1987
3. Analogue Electronics, 1988
4. Advanced Electronics, 1989
5. Microprocessors, 1993
6. Industrial Automation, 1993
7. C Language, 1994
8. Pascal Language, 1994
9. Microprocessor Interfacing, 1996
10. Instrumentation, 1997
11. Computer Architecture, 2000
12. Computer Fundamentals (windows 2000), 2003
13. Basic Computer Education (windows XP), 2006
BSc Senior Projects
1. Determination of Solution Concentrations Using Laser Tech. (1984)
2. Measurements of Distances Underwater Using Sonar Techniques (1984)
3. Underwater Communication Using Hydrophones (1985)
4. Acoustic Pressure Measurements Using Laser Techniques (1985)
5. Computer Controlled Music Generator (1985)
6. Laser Piano (1986)
7. Computer Controlled Curve Tracer in Real Time (1986)
8. Computer Controlled Mechanical X-Y Scanner (1986)
9. Position Control of Laser Beam by Using Quadrant Detection Tech.(1987)
10. A Microprocessor System for Universal PC Interfacing (1987)
11. Software Development for Universal Interfacing Card (1987)
12. Microprocessor Controlled Temperature Display Unit (1988)
13. Metal Detector (1988)
14. Analogue to Digital Converter Card for IBM PC / Xt (1988)
15. Laser Data Transmission for Sound Reproduction (1988)
16. Photo acoustic Signal Detection by Using Gating Techniques (1989)
17. Store Management by D-Base III Software (1989)
18. Electromagnetic Interference Filters 1989)
19. Class D Power Amplifier (1989)
20. Precision Power Supply (1989)
21. Microprocessor Controlled Universal Clock (1990)
22. Digital Band pass Filters (1990)
23. Infrared Alarm Detector (1990)
24. Microprocessor Controlled Function Generator (1990)
25. Automatic Sun Tracker (1991)
26. Ultrasonic Detection Using Noise Correlation Tech (1991)
27. Eprom Programmer (1991)
28. Microprocessor Controlled TV Antenna Rotator (1992)
29. Subsurface Crack Simulation by Using Finite Difference Tech (1992)
30. Car Door Alarm (1992)
31. Robot Bug (1992)
32. Electronic Dice (1992)
33. Digital Frequency Counter (1992)
34. Digital Post Box Indicator (1993)
35. Voltage Controlled Current Source (1993)
36. Digital Phase Meter (1993)
37. PC Controlled Hearth Beat Monitor (1993)
38. Computer Controlled Wind Generator (1995)
39. Development of Computer Virus/Antivirus (1995)
40. Surface Texture Analysis by Using Image Processing Tech. (1995)
41. Computer Interfaced Robot Arm (1996)
42. Physics Lab Design in the Internet for Online Education (1999)
43. Microprocessor Controlled Incubator (2000)
44. Surface Wave Analysis by Using Image Processing Techniques (2000)
45. Hotel Management Using Visual C Builder (2002)
46. Design and Construction of Digital Writing Pad (2006)
47. Student and Class Timetable Software Package (2006)
48. Virtual Reconstruction of an Archaeological Site by Using Software Techniques
(2006)
49. Intelligent Hospital Information System, IHIS (2007)
50. Language management system ,LMS (2007)
51. Intelligent motion by using mobile robot +video unit (2007)
52. Virtual University campus by using image modeller (2007)
53. Car Rental agency (2007)
54. Web based shopping site (2007)
55. Building Windows firewall (2008)
56. Graph Viewer in Java (2008)
57. Remote identification by using mobile robot arm and image processing unit (2008)
58. Edge detection by using Sobel and Prewitt image filtering (2008)
59. Developing a polygon thinning based on Voronol and Delaunay triangulations (2008)
60. Generating stunning visual effects : water , fire and plasma (2008)
61. Hough transform (HT) and its applications in pattern recognition (2008)
62. Determination of cracks in metals by using finite modelling techniques. (2008)
63. Wireless pattern recognition by using a pilotless model aircraft (2009)
64. Robot car with obstacle sensors by using PIC control (2009)
65. Rat maze by using fuzzy logic (2009)
66. Fingertip heart rate monitor and analyser (2009)
67. Remote control of appliances’ by using telephone lines (2009)
68. Intelligent scissors (2010)
69. Using programming to display the personal coordinates .in buildings (2010)
70. A microprocessor controlled universal clock (2010)
71. ımage reconstruction of 3D objects with a 3D video scanner (2010)
72. Fusing Stereo images into its equivalent cyclopean view (2011)
73. Position determination by using k nearest algorithm (2011)
74. Intelligent Image interpretation software system (2011)
75. Multiple database structure and Kalman filtering (2011)
76. Location detection by using particle filtering (2011)
77. 3D virtual viewer on mobile devices (2011)
78. Position detection by using novel adaptive cooperative location algorithm (2011)
79. Landmark position detection by using RFID and reference point techniques (2012)
80. RFID data selection by using Chebbuchev and Elliptic filtering techniques (2012)
81. Location detection by using particle and Knn algorithms (2012)
82. 3D position detection by using Std, Kalman and linear position data (2012)
83. Position detection by using wireless communication network in indoors (2012)
84. By using regression analysis to determine Knn and weight algorithms (2013)
85. Automatic product selection and payment by using RFID in supermarkets (2013)
86. Position detection by using segmentation algorithms (2013)
87. Position detection by using random particle filtering (2013)
88. Generation of virtual fingerprint by using exponential taper functions (2013)
89. Fingerprint identification by using image processing techniques (2014)
90. 3D Skull reconstruction by using tomographic images and software techniques (2014)
91. Facial reconstruction by using 3D scanner data and software techniques (2014)
92. Elliptic band pass filtering of RSSI data by using software techniques (2014)
93. Determination of article stealing by using computer techniques (2014)
94. Virtual animation and scenario building by using unity software (2014)
95. Computer simulation of elliptic filtering (2014)
96. Prediction of graph points by using bi-sectioning algorithm (2014)
97. Modelling cumulative distribution with software techniques (2014)
98. Geofencing for house arrest by using GPS+GPRS arm bracelets (2014)
99. Reconstruction of objects by using 3D max data and unity motor software (2014)
100. Virtual reality of Hagio Sofia church with real time motioning (2015)
101.Reconstruction of Augustus temple in virtual reality in real time domain(2015)
102.GPS position detection by using Google maps (2015)
103.Distance calculation by using bi-sectioning algorithm with RFID signals(2015)
104.Integrated GPS position detection by using GPS and video signals(2015)
105.3D construction of human skull by using tomography images(2015)
106.Personal identification by using human eye retina and image processing (2015)
107.Hand palm identification by using image processing techniques (2015)
108.Real time motion by using unity programming in a religious temple (2015)
Graduate Theses
1. Airborne Optical Transmitter and Receiver Network (1995)
2. PC Remote Control by Using Telephone Lines (1994)
3. Ultra Low Noise, Wide Band AC Amplifier (1994)
4. A Narrow Band Active Notch Filter with Tuneable Centre Frequency (1993)
5. Wide Band Noise Generator (1992)
6. Precision Power Amplifier (1992)
7. 3D Visualization of Brain Slices by Using Computer Techniques (2005)
8. Six Axes Robot Arm Control (2005)
9. Determination of Facial Paralysis by Using Image Processing Techniques (2006)
10. 3D Modelling of the Human Skull by Computer Techniques (2007)
11. Contour Profiling of Brain Tumours by Using Image Processing Techniques (2007)
12. Battle field modelling and simulation of war games (2008)
13. Construction of 3D scanner by using stereoscopic visualization techniques (2009)
14. Simulation of cornea aberrations (2011)
15. Position detection by using landmark technique and RFID (2012)
16. 3D position identification by using cricket technique (2013)
17. Hand palm printing detection by using image processing (2014 continue )
18. Retina identification by using image processing (2014 continue…)
19. Real time position detection by using GPS+GPRS+GSM techniques (2013 continue…)
20. fingerprint detection by using image processing techniques (2014)
Undergraduate courses given :
1. General physics 1& 2
2. Programming in C and C++
3. Programming in Java
4. Assembly programming
5. Programming in Fortran and Basics
6. Programming in Pascal
7. Linear circuit theory +lab
8. Analog Electronics + lab
9. Digital Electronics + lab
10.Instrumentations and measurements
11.Advance Analog Electronics +lab
12.Microprocessors + lab
13.Microprocessor interfacing +lab
14.Logic Design+lab
15.Signals and systems
16.Image processing + lab
17.Image processing applications
18.Industrial electronics +lab
19.Computer Architecture +lab
20.Non destructive testing + lab
21.Computer graphics
22.Ultrasonics
23.Remote sensing
24.Computer networks
25.Cisco
26.RFID
27. Modelling and simulation
28.Wireless sensor networks
29.Ethics
Graduate courses given :
1. Microprocessor systems
2. Digital system design
3. Adv analog electronics
4. İnformation theory
5. Communication systems
6. RFID applications
7. Wireless network applications
8. Instrumentations
9. Adv computer architecture
10.Image processing techniques
11.Adv image processing applikations
12.Remote sensing techniques
13.Satellite communication.
General Public Computer courses given :
1. Introduction to Computers
2. Computer hardware and maintenance
3. Computer automation
4. Windows
5. Word, Excel
6. Access
7. Power Point
8. Internet
9. Web page and design
10. 3D max 4
11. Maya
12. Computer networks
13. Cisco
14. Ethics
15. RFID
16. Wireless sensor networks
17. TOEFL English
Computer Experience (Hardware):
1. Vax 11/780
2. Silicon Workstation
3. IBM PCs, Pentium
4. Apple, Macintosh
5. BBC, Commodore
6. DSP (Tms 320), (Digital signal processing card)
7. DT2851, DT2858, DT2861 (Image Processor Cards + Their Soft wares)
8. DT2801, Citadel Dc30 (Data Acquisition Cards)
9. Eprom programmers
10. I/O cards
11. Parallel processors.
12. Cisco equipment (Cisco lab)
13. Wireless sensors and networks
14. Cricket wireless sensor devices.
15. ZigBee devices 5121, 5139, 5148
16. RF Code positioning devices
Computer Experience (Software):
Unix ,Dos, Windows, Internet, Pspice , Orcad, Electronic Work Bench, Logic works ,
Matlab (all the major tool boxes), Mathematica, Logic Design , Mathcad, Digi Filters,
Turbo Assembler, DT Iris (Image Processing), PcCAD, Semper 6 (Image Processing),
SAS, Dbase, Fortran, Turbo Basic, Turbo Pascal, C / C++, AutoCad, 3Dmax, Maya,
Map info, Web Design, ZigBee, Network simulator (NS)
Microprocessor Experience :
1. Intel: 8080, 8085, 8086, 8088, 8051, 80286, 80386, 80486 , Pentium
2. Motorola: 68hc09, 68hc11, 68000
3. Programmable logic Controls: Omran, Mitsubishi
Teaching and Research Areas :
1. Laser Applications
2. Optics and Metrology
3. Remote Sensing & GPS
4. Image processing & computer vision
5. Modelling and simulation
6. Computer graphics & appl.
7. Non-destructive testing (NDT)
8. Computer Interface, Data collection & analysis
9. Digital, Analogue Electronics ,design, research ,development
10. Microprocessors, design ,research development
11. Medical image processing
12. Mechatronics
13. Wireless sensor networks
14. RFID applications
15. Forensic image processing
16. Defence projects (weapons platforms, range finders, simulators etc..)
17. Virtual reality and games (oculus, unity etc..)
References:
1. Prof. Dr. Yusuf Ziya Özcan: YÖK president (past) ,Ambassador to Poland
2. Prof. Dr. Necdet Sezgin : Rektor ,Ankara Univ (past)
3. Prof. Dr. Nusret Aras : Rektor , Ankara Univ (past)
4. Prof. Dr. Sükrü Boylu : Adnan Menderes Universitesi Rector (past)
5. Prof Dr. Serdar Kılıçkaplan : Hitit üniversitesi (past)
6. Prof. Dr. Ömer Gebizlioglu : Vice Rector , Ankara Univ,(past)
7. Prof. Dr. Sadettin Özyazıcı: Vice Rector, Gaziantep Univ (past)
8. Prof Dr. Mehmet R. Tolun : Engineerin dean (past), Aksaray Üniv
9. Prof. Dr. Bala Supramanian: Engineering dean, Lefke Üniv
10. Prof. Dr. Rasim Karabacak: Pamukkale Univ
11. Prof. Dr. Mustafa Temiz: Pamukkale Univ
12. Prof. Dr. Fahrettin Aslan: Ankara Univ
13. Prof. Dr. Necmettin Tanrıöver: senior lecturer, Computer eng,.Başkent Univ