Anil Kumar Chaubey
Institute of Minerals and Materials Technology (IMMT), Bhubaneswar
Personal profile
B.Tech (1995)
M.Tech (2001)
Ph.D. (Submitted -2013)
NIT Nagpur, Maharastra, India
IIT-BHU, varanasi, India
IIT-BHU, varanasi, India
Research Interest
Composite materials
Mechanical milling
Nano particles
Al and Mg alloys
Experience
 Scientist Institute of Minerals and Materials Technology Bhubaneswar since
October, 2004.
 Assistant Manager R&D department of Ispat Industries Limited Dolvi, from April 2001
Experience details (In reverse chronological order)
Sl. Name of the
No. Institute
/Organization
Duration
Post Held
of
Employme
nt
Nature of Job
1
Institute Of
Minerals and
Materials
Technology,
Bhubaneswar
19.10.2004
to till now
Sr.
Scientist
Institute Of
Minerals and
Materials
Technology,
Bhubaneswar
19.10.2004
to
18.10.2008
Scientist
M/S Ispat Indstries 12.04.2003
Ltd. Dolvi , New to
Mumbai
18.09.2004
Asst.
Manager
Development of nano structured
Mg-based high strength light
weight materials, Non-equilibrium
processing of materials, Al based
composites. Electron microscopy,
Surface engineering, Failure
analysis
Production of titania rich slag
from illuminate, Redusibility
study if ore and minerals, Al
based composites, mechanical
alloying, Electron microscopy,
Surface engineering, Failure
analysis
Quality control & Research and
Development work
2
3
------------do------------
12.04.2002
to11.04.20
03
Sr.
Engineer
------------do----
4
------------do------------
12.04.2001
to
11.04.2002
Manageme
nt Trainee
------------do----
Recent Publications
1. Wang, K. G. Prashanth, S. Scudino, A.K. Chaubey, D. J. Sordelet and J. Eckert Synthesis
and characterization of nanocrystalline Mg93.3Al6.7 powders produced by mechanical alloying J. Alloys
Compd. doi.org/10.1016/j.jallcom.2013.04.190
2. A.K. Chaubey, S. Scudino, K.G. Prashanth, M. Stoica, G. Vaughan, N.K. Mukhopadhyay,
B.K. Mishra and J. Eckert “Phase transitions in Al3Ca8 and Al14Ca13 intermetallic compounds
induced by milling and annealing” Materials Letters 79 (2012) 145–147.
3. A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, B.K. Mishra and J.
Eckert “Effect of particle dispersion on the mechanical behavior of Al-based metal matrix
composites reinforced with nanocrystalline Al-Ca intermetallics” J. Alloys Compd. 536(2012)
134-137.
4. K. Jayasankar, P.K. Ray, A.K. Chaubey, A. Padhi, B.K. Satapathy, P.S. Mukherjee
“Production of pig iron from red mud waste fines using thermal plasma technology” Int.
J. Minerals, Metall. Mater. 19, 8 (2012) 679-84.
5. A.K Chaubey, B.K. Mishra, N.K. Mukhopadhyay and P.S. Mukherjee “Effect of compact
density and preheating temperature of the Al–Ti–C preform on the fabrication of in situ Mg–
TiC composites” J Mater Sci (2010) 45:1507–1513.
6. A.K. Chaubey, S. Mohapatra, B.Bhoi, J. L. Gumaste, B.K. Mishra & P.S. Mukherjee“Effect of
cerium addition on the microstructure and mechanical properties of Al-Zn-Mg-Cu alloy”
Journal of Defect and diffusion forum Vol.279 (2008) pp-97-103.
7. A.K. Chaubey, B.V.R. Murthy, M.K. Ghosh and P.S. Mukherjeee “Studies on reduction of
iron ore fines in packed bed by coke/coal char fines using” Metals Materials and processes
2008,Vol.20, No.1, pp 67-76.
8. R.Dasgupta and A.K. Chaubey “Upgradation of Chrome Ore by Prereduction” Metals
Materials and processes 2008,Vol.20, No.2, pp 107-112.
9. R.Dasgupta and A.K. Chaubey Utilisation of nickel plant leach residue by sintering technique
Transactions of The Indian Institute of Metals Vol. 62, No.3 (2009) pp. 1-4.
10. A.K. Chaubey, S. Mohapatra, K.Jayasankar, S.K. Pradhan, B. Satpati1,S.S. Sahay, B.K.
Mishra and P.S. Mukherjee,“Effect of Microalloying of Ce in an advanced Al-Zn-Mg-Cu alloy”
Transactions of The Indian Institute of Metals Vol. 62, No.6 (2009) pp. 539-543
Conference
1. A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, N.K. Mukhopadhyay ,B.K. Mishra and
Jürgen Eckert “Preparation and characterization of bulk Mg−7.4Al alloy by consolidation of
mechanically alloyed nanocrystalline powders” Int. Conf. on Nanostructured Materials
(NANO), August 26-31, 2012 in Greece.
2. A.K. Chaubey, K. Jayasankar, P.S. Mukherjee, B.B. Jha “An innovative method to utilize plant
waste for value added product and sustainable environment” Indian Science Day 11June-2012
at Freie university Berlin, Germany
3. A.K. Chaubey, S. Scudino, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra and J. Eckert
“Effect of Cerium on Microstructure and Mechanical Properties of Mg-Al Alloy” Int. Conf.
on Solidification Science
and
Processing
(ICSSP)
November
19‐22, 2012
in Bhubaneswar, India.
4. A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, N.K. Mukhopadhyay, B.K. Mishra and
Jürgen Eckert “Electron microscopy characterization of nanocrystalline Mg93.3Al6.7 produced by
consolidation of mechanically alloyed powders Conf. cum Workshop on Electron Microscopy
December 6-8, 2012 at IIT-BHU.
5. A.K Chaubey, B.B. Jha, B.K. Mishra, N.K. Mukhopadhyay “Mg-6.7% Al metal matrix
composites reinforced with nanocrystalline Al-Ca intermetallics” int. conf. and Exhibition on
powder metallurgy (PM-13)at Pune, India.
6. Chaubey A.K, Mishra B.K., Mukhopadhyay N.K. “Synthesis and characterization of Mg-TiC
composite by self propagating high temperature synthesis process”. IFW PhD seminar-2010,
held at Meisen Germany.
7. A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, B.K. Mishra and J.
Eckert “ Study the microstructure and mechanical property of Al-based metal matrix
composites reinforced with nanocrystalline Al-Ca intermetallics” DFG annual conference 2010,
held at Berlin Germany .
8. Chaubey A.K, Mishra B.K., Mukhopadhyay N.K. and Mukherjee P.S. “Fabrication of in situ
Mg-TiC composite by mechanically activated self propagating high temperature synthesis
process”. NMD-ATM-2009, held at Kolkata.
9. K.Jayasankar, P.K. Ray, S. Pattnaik, A.K.Chaubey, and P.S.Mukherjee “Plasma smelting of
red mud for the production of pig iron” International seminar on Mineral processing
Technology (MPT-2009), Bhubaneswar, 28th to 30th Oct 2009.
10. K.Jayasankar, P.S.Mukherjee and A.K.Chaubey “Utilisation of iron ore fines to make pig iron
by thermal plasma technology” NMD-ATM 2009, Kolkatta.
Technical reports
1. Smelting Trials on Cobalt Hetrogenite ore in 95 kVA submersed arc furnace
(T/AMT/586/November/2006).
2. Pellet making from iron ore fines for DRI production: A feasibility study
(T/AMT/667/May/2008).
3. Characterization of iron ore samples from OMDC Mines. (T/MD/559/May/2006).
Honors and awards
Details of contribution related to
the Award
Name of the
Award
Awarded by
Year
Utilisation of iron ore fines to
make pig iron by thermal plasma
technology
Best Paper
NMD ATM-2009
In Extractive
Metallurgy Group
DAAD
Fellowship
Jury NMD-ATM2009
2009
DAAD
20092010
Design and development of high
temperature and high strength
metal matrix nanocomposites by
mechanical milling
Industrial Experience
Organization
Department
Duration
:
:
Area of experience
Ispat Industries Limited Dolvi, Raigad, Maharastra
:
Process control and research development
4 Year
 Process control of EAF, LRF, and caster and rolling mill.
 Observed the defects in the HR Coils and study the different process parameters and
find out the root cause of different defects like-(alumina, edge bur, rolled in scale,
roll wear scale, longitudinal cracks etc.)
 New product development as per requirement of customer.
 Attained the customer complaint for cold rolling, welded tubes and pipes, LPG
Cylinder. And analysis there problems.
 Mechanical testing of different grades of steel like (tensile test, hardness, impact,
bend, DWTT)
 Find the microstructure, inclusion rating and grain size of different grades of steel.
Customer Complaint
Attending to customer complaint is also being done by me in HR coils, which is
generally sent to cold rolling ,pipes,LPG cylinder, boiler & automobile
applications.Finding out the cause of problem and done rectification in HR coil to
prevent recurrence.
Membership in Professional Societies
1. Life Member in Indian Institute of Metals, Calcutta.
2. Life Member, Powder Metallurgy Association of India.
3. Life Member, Indian Institute of Mineral Engineers, Jamshedpur.