ICCE-22
Final Program
July 13-19, 2014 Saint Julian’s, Malta
Maltese spelling is, San Ġiljan
Sponsors:
University of Malta, Msida, Malta
Malta Chamber of Scientists
Key Lab of Advanced Technologies of Materials (Ministry of Education), Southwest Jiaotong University, China
Chengdu Green Energy and Green Manufacturing Technology R&D Center. China
Symposia
Bio composites, Chemistry of composites, Materials Chemistry, Oxide Nanomaterials and Heterostructures , General applications and Processing,
Infrastructure Composites, Physics of Materials, Novel Magnetism and Superconductivity, Mathematical modelling, Metals, Nanoprocessing, Textile composites (natural
fibres)
Technical co-chairs
Gianluca Cicala
Kazuhiro Endo
Tamio Endo
Luciano Feo
Paolo Mele
T.C. Rousakis
Gary Tsui
Liu Yu
Jianren Zhou
Zuowan Zhou
Yuantai Hu
Jinsong Leng
Paolo Lonetti
Antonio Pantano
Guoqiang Yuan
Bernardo Zuccarello
Ayman Mosallam
Carlos Navarro
Y. Nakamura
J.M. Park
M.J. Pindera
Rosa Penna
Kyong Y. Rhee
T.C. Rousakis
Jag Sankar
C.M.M.Mota Soares
A.H. Sofiyev
Gary Tsui
Lionel VAYSSIERES
Shiren Wang
Gunnar Westin
Zuowan Zhou
ICCE-22 Scientific Committee and Review Board
Gagik Ayvazyan
Ramon Artiaga
Abdalla Darwish
Mizi Fan
Ramaz Gakhokidze
Joseph N. Grima
Hanns-Ulrich Habermeier
Hongping Hu
ICCE-22 Editorial Advisory Board
Debes Bhattacharyya
Victor Birman
Philippe Boisse
Richard Degenhardt
Jean Ebothe
K. Endo
Tamio Endo
Mizi Fan
Wei Gao
A. Munoz Gonzalez
Jihua Gou
Nikhil Gupta
Lubomir Lapcik
Alan K.T. Lau
Joong-Hee Lee
Chaoyang Li
Guoqiang Li
Jiri Militky
Sunday night dinner, July 13, 2014
REGISTRATION and dinner, at Golden Tulip Vivaldi hotel, Saint Julian’s, Malta
(early registration begins Saturday July 12, 2014, 3PM-6PM)
ICCE-22 KEYNOTE LECTURES
(Monday July 14, 2014, at Golden Tulip Vivaldi hotel)
Monday 8:00AM-8:30AM Opening ceremony: speakers from Univ of Malta, Malta Chamber of Scientists, and Malta government representatives
Chair: Kendall Harris (Prairie View A&M U., Texas)
Monday 8:30AM-9:00AM Globalization in Education and Research
Kendall HARRIS (Prairie View A&M U., TX)
Monday 9:00AM-9:40AM Salt and Alkoxide Based Routes to Thin and Ultra Thin Composite and Oxide Films
Gunnar WESTIN (Uppsala U., Sweden)
9:40AM-10:20AM Carbon Nanomaterial Based Multifunctional Composites and Energy Storage Devices
Tsu-Wei CHOU (U. Delaware)
10:20AM-11:00AM The Third Law of Thermodynamics: Local Activity Principle Leon CHUA (UC Berkeley, Calif. ,TU Munchen)
11:00AM-11:40AM
Smart and Multifunctional Nanocomposites: Recent Progress and Future Applications Jinsong LENG (Harbin I.T.,China)
11:40AM-12:20AM Recent Developments in the Virtual Testing of Carbon-Fibre Composite Structures Brian FALZON (Queen's U.Belfast, UK)
12:20AM-1:00PM Complex Oxide Thin Film Heterostructures and Superlattices – a Plethora of Research Opportunities And Applications
Hanns-Ulrich HABERMEIER (Max Planck Inst, Stuttgart, Germany)
Monday 1:00PM-2:00PM Lunch on your own. Work in progress session
2:00PM-2:40PM
Ferroelectric Composite Nano-Devices
James F. SCOTT (Cambridge U., UK) FRS
2:40PM-3:20PM Low-Cost Water Splitting Oxide Heteronanostructures
Lionel VAYSSIERES (Xi’an Jiaotong U., China)
3:20PM-4:00PM Synthesis Of Graphene and its Applications in Electromagnetic Interference Shielding and Flexible Transparent Conductive
Film Nyan-Hwa TAI (Nat. Tsinghua U., Hsinchu)
4:00PM-4:40PM Oxide Composites for Electronics
Yoshinobu NAKAMURA (Tokyo, Japan)
4:40PM-5:20PM Biometals towards Commercialization
Jag SANKAR (N.Carolina A&T State U., Greensboro) NSF-Engrg. Res. Center
5:20PM-6:00PM State-Of-The-Art Review On Codes, Standards And Design Guides For Composites Connections
Ayman S. Mosallam (UC Irvine, Calif.)
6:00PM-6:40PM Composite- And Nano-Technologies In Advanced Printing And 3D Printing Yu LIU (Chengdu, China)
6:40PM-7:20PM Auxetic Behaviour at the Nanoscale Joseph N. GRIMA (U. Malta)
7:20PM-8:00PM Cement-Based Composites Durability and their NANO Structures
Mileva RADONJIC (Louisiana St.U.)
work in progress session
Monday 1:00PM-2:00PM, Lunch time, Student presentations
Rotating Rigid Units With A Magnetic Insertion Joseph N. Grima, Roberto Caruana-Gauci (U. Malta), Mirosław R. Dudek (Zielona Gora U., Poland),
Krzysztof W. Wojciechowski (Poznan, Poland), Ruben Gatt (U. Malta)
Other presentations welcome
ICCE-22 Malta,
Tues,Wed,Thurs,Fri all technical sessions at at Golden Tulip Vivaldi hotel
Session 1a BIO 1
Tuesday 9:00AM-11:00AM Room A
Chair: Ivan Lukes, co-chairs: W.C. Law, G. Slawinski
Nanoparticles As Contrast Agents For Magnetic Resonance Imaging Ivan LUKES (Charles U., Prague, Czech Rep.)
Preparation Of Cancer Cells Targeted Hyaluronic Acid-Quantum Dot Nanohybrids Based On Microemulsion
W.C. LAW, C.H. Ng, C.Y. Tang, C.P. Tsui (Hong Kong Poly U., China)
Increase Of Safety Of Agricultural Products By Means Of New Bio-organic Technology
Ramaz GAKHOKIDZE (Tbilisi State U., Georgia)
Global Bone and Joint Network - Requirements for a Sustainable Evolving BioTech Resource
M. Abdelrahim, F. Khalaf, D. O'Dowd, P. Smitham, Simon GRANGE (Medical consultant, UK)
'Keep It Simple' Designing for Upper Limb Nanotechnology Derived Applications
F. Khalaf, M. Abdelrahim, D. O'Dowd, G. Jell, P. Smitham, Simon Grange (Medical consultant, UK)
Preparation Of Injectable Hydoxyapatite / Collagen Nanocomposite Utilizing Sodium Alginate And Additives
Masanori KIKUCHI, Taira Sato (NIMS, Tsukuba, Japan), Mamoru Aizawa (Meiji U.,Kawasaki, Japan)
Design Of A Bio-Degradable Composite Bone Plate Based On The Mechano-Regulation Theory Using Deviatoric Strains
Hassan Mehboob, Seung-Hwan CHANG (Chung-Ang U., S. Korea)
Numerical Examination Of Contemporary Materials For Enhancing Passive Safety Of Armored
Vehicles Occupants Grzegorz SLAWINSKI, Tadeusz Niezgoda (Military U.T., Warsaw, Poland)
Session 1b MAT CHEM 1 (organized by THO)
Tuesday 9:00AM-11:00AM Room B
Chair: Y. Nishi, Y. Nakamura Chairs Assistants: Hideo Sawada, Eisaku Sumino
Low Molecular Weight Aromatic Compounds Possessing Nonflammable And Falammble Characteristics In Calcium Fluoride Nanocomposite
Matrices After Calcination at 800 deg C Hideo SAWADA, Tomoya Saito (Hirosaki U., Japan) invited
Preparation And Properties Of Fluorinated Carboxylic Acid/Silica Nanocomposites-Encapsulated Low Molecular Weight Compounds
Eisaku SUMINO, Shougo Ise, Tomoya Saito (Hirosaki U., Japan), Masakazu Nishida (AIST, Nagoya, Japan), Tsuyoshi Noguchi
(Daikin Indus., Osaka, Japan), Hideo Sawada (Hirosaki U., Japan)
Composite-Structures of Single-Crystalline Ge(SiSn) and Amorphous Insulator on Si Platform for Multi-Functional Transistors by SelfOrganized Processing Masanobu MIYAO, Ryo Matsumura, Hironori Chikita, Taizoh Sadoh (Kyushu U., Japan) invited
Low-Temperature Formation of Atomically-Controlled GeSn Thin-Films on SiGe Virtual-Substrate by Liquid-Solid Coexisting Annealing
Hironori CHIKITA, Ryo Matsumura,Taizoh Sadoh, Masanobu Miyao (Kyushu U., Japan)
Self-Organized Crystallization of Group IV Mixed-Crystal Semiconductors on Insulating Substrate for Advanced Thin-Film-Transistors
Ryo MATSUMURA, Hironori Chikita, Taizoh Sadoh, Masanobu Miyao (Kyushu U., Japan)
Tuning The Emission Of Luminescent Germanium Nanoparticles Naoto SHIRAHATA (NIMS, Tsukuba, Japan) invited
Session 1c MATH 1
Tuesday 9:00AM-11:00AM Room C
Chairs: C.N. Chen, David Fuks
A Global Secant Relaxation (GSR) Method-Based Predictor-Corrector Procedure For The Iterative Solution Of Linear Or Nonlinear Algebraic
Systems Of DQ And Related Discrete Element Analysis Methods Chang-New CHEN (Nat Cheng Kung U., Tainan)
Flow Of Polylactides In Capillary Rheometers: Experiments and Simulations N. Othman, M. Ansari (UBC, Vancouver, Canada), Th. Zisis,
Evan MITSOULIS (Nat Tech U.Athens, Greece), Savvas G. Hatzikiriakos (UBC, Vancouver)
Density Functional Theory Study Of The Electronic Structure Of Nano-Grained Tinisn Half-Heusler Alloy
Maxim Shlimovich, David FUKS (Ben Gurion U. Negev, Israel)
Prediction The Crack Direction In Brittle Matrix Composites With Irregular Structure Jerzy PODGORSKI, Jozef Jonak (Lublin U.T., Poland)
Comparison of Wide Band Microwave Properties of MWCNTs Embedded In Different Polymer Matrix: PDMS And Epoxy Resin
Mauro GIORCELLI, M. Hajj Yahya, P.Savi, A. Tagliaferro (Politec. Torino, Italy)
Review Of Testing Instruments For Adhesive Or Bonded Joints At Different Strain Rates Zhemin JIA, G.Q. Yuan (Tongji U., China), David Hui (U. New Orleans)
Crack Detection Sensitivity of Hierarchical Composites Hansang KIM (Gachon U., Seongnam, S. Korea)
Session 1d GENERAL 1
Tuesday 9:00AM-11:00AM small room Chairs: J.M. Castro, J. Ligoda, R.E. Sliwa
Multifunctional Nanopapers For Fiber Reinforced Polymeric Composites
Eusebio Duarte Cabrera, Ziwei Zhao, Xilian Owang, Jose M. CASTRO, L. James Lee (Ohio St.U.)
Using AI Methods For Solving Real Technical Problems Joze BALIC (U. Maribor, Slovenia), Roberto Boeri (U. Mar del Plata, Argentina)
Effect Of Surface Treatment On Particulate Filled Polymer Composites Atta ur Rehman Shah, M.N. Prabhakar, Dong-woo Lee (Changwon Nat U.,
S. Korea) , Byung-sun Kim (Korea Inst Mat Sci, Changwon), Jung-il SONG (Changwon Nat U., S. Korea)
Thermal And Acoustic Properties Of Ceramic Foam/Epoxy Composites Manufactured By The Infiltration Process
Joanna LIGODA, Romana Ewa Sliwa, Marek Potoczek (Rzeszow U.T.,Poland)
Plastic Deformation of GLARE Type Composites Malgorzata WILK, Romana Ewa Sliwa (Rzeszow U.T., Poland)
Drilling Of Holes In Composites Of Different Structures Using New Tools Romana Ewa SLIWA, Piotr Tyczynski (Rzeszow U.T., Poland)
EMI Shielding Effectiveness of Thermally Exfoliated Graphene/ABS Composites Myung Chul KANG (Chonbuk Nat U., S. Korea), Nam-Il Kim
(Chungnam, S. Korea), Nam Hoon Kim, Joong Hee Lee (Chonbuk N.U.)
ICCE-22 Malta
Session 2a INFRASTR 1
Tuesday 11:00AM-1:00PM
Room A
Chairs: Apostolos Fafitis, Eunsoo Choi, co-chair: R.S. Olivito, D. Cronin
Analytical Method for Shear Capacity of Through-Diaphragm Connections of Concrete-Filled Square Steel TubularColumns
Jianhong Han, Bin Rong (Xinjiang U., Urumqi, China), Apostolos FAFITIS (Arizona St.U., Tempe), Guangtai Zhang (Xinjiang U.)
On The Axial And Rotational Flexibility Of Web-Flange Junctions of PFRP E-Glass/Polyester Profiles A.S. Mosallam (U. California-Irvine),
Luciano FEO (U. Salerno, Italy) , A. Elsadek (UC Irvine) , S. Pul (Karadeniz T.U., Trabzon, Turkey), Rosa Penna (U. Salerno, Italy)
A Preliminary Study Of Binder-Less Panel Made Of Pre-Treated Hemp (Cannabis Sativa L.) Shives
Ramunas TUPCIAUSKAS, Martins Andzs, Janis Rizhikovs, Maris Puke, Aigars Pazhe, Prans Brazdausks (Latvian State Inst. Wood Chem., Riga)
NOvA Detector: Largest Free Standing Plastic Structures In The World Daniel CRONIN-Hennessy (U. Minnesota)
Bond Behavior Of Steel Reinforcing Bars Embedded In Concrete Confined By FRP Wire Jackets Eunsoo CHOI (Hongik U., Seoul, S. Korea),
Baik-Soon Cho (Inje U., Kimhae, S. Kores), Chunsung Jung, Yoon Eo (Hongik U.)
Experimental Analysis Of Masonry Elements Strengthened With NFRC Composites Subjected to Eccentric Loading Renato S. OLIVITO
(U. Calabria, Italy), Oscar A. Cevallos (U. Nac Chimborazo, Ecuador), Rosamaria Codispoti (U. Calabria)
Session 2b OXIDE 1 (organized by THO)
Tuesday 11:00AM-1:00PM
Room B
Chair: T. Endo, P. Mele, A. Zorkovska
High Quality ZnO Nanorods – From A New Technology To Applications Bartłomiej S. WITKOWSKI, Lukasz Wachnicki, Sylwia Gierałtowska,
Rafał Pietruszka, Marek Godlewski (Inst.Physics, Polish Acad Sci, Warsaw)
The Influence Of Various Sintering Methods On Microstructure And Properties Of Oxide Ceramics
Marcin ROZMUS, P. Figiel, P. Putyra (Krakow, Poland)
Structural Control Of Photocatalytic TiO2 Films Deposited Using Oxygen-Ion-Assisted Glancing Angle Reactive Evaporation
Yoichi HOSHI, Naoto Kitahara (Tokyo Polytechnic U., Japan) Friday
Structural and Physical Properties Of Semiconductor Oxide Thin Films Doped With Transition Metals
Jenica NEAMTU (ICPE-CA, Bucharest, Romania)
Resistivity Minimum Of Na0.73 CoO2 Single Crystal - Effect Of Electron Correlation Anna ZORKOVSKA (Slovak Acad Sci, Kosice),
Anton Baran (TU Kosice, Slovakia), Alexander Feher (Safarik U. Kosice, Slovakia), Chengtian Lin (Max-Planck Inst, Stuttgart, Germany)
Session 2c MATH 2
Tuesday 11:00AM-1:00PM
Room C
Chairs: F. Moleiro, J. Qu, C. Atas, G. Mancusi
Design Of Composite Sandwich Structures Using Multiobjective Optimization J.F.A. Madeira, A.L. Araujo, C.M. MOTA SOARES,
C. A. Mota Soares (IDMEC, U. Lisboa, Portugal), A.J.M. Ferreira (U. Porto, Portugal)
Layerwise Models For The Coupled Electromechanical Analysis Of Multilayered Plates Using Mixed Least-Squares Formulation
Filipa MOLEIRO, C.M. Mota Soares, C.A. Mota Soares (IDMEC, Lisbon, Portugal) -Tues
An Investigation Of The Tensile Deformation And Failure Of An Epoxy/Cu Interface Using Coarse Grained Molecular Dynamics Simulations
Shaorui Yang, Jianmin QU (Northwestern U., Evanston, IL)
A Mechanical Innovative Approach For Studying The Buckling Behavior Of Composite Beams
Geminiano MANCUSI, Francesco Ascione, Marco Lamberti (U. Salerno, Italy)
Elementary-Tree Space Compression Using Combination Of Nonlinear And Linear Logic Sunil R. Das, Nick Malan, Scott Morton (Troy U.,
Montgomery, AL), Satyendra N. Biswas (Kaziranga U., Assam, India), Mansour H. Assaf (U. South Pacific, Suva, Fiji)
Repeated Impact Response Of The Glass/Epoxy Composites Subjected To Thermal Aging
Cesim ATAS, Akar Dogan (Dokuz Eylul U., Izmir, Turkey)
Stability Of A Nanoscale Plate Weakened By A Circular Hole Svetlana Bauer, Nikita MOROZOV, Boris Semenov (St. Petersburg State U., Russia)
Session 2d GENERAL 2
Tuesday 11:00AM-1:00PM
small room
Chairs: Abdalla Darwish, co-chairs: G. Gorny, N. Kaoud
New Double-Beam Matrix Assisted Pulsed Laser Evaporation (Db-Maple) Method For Making Polymer Nano- Composite Coatings
Abdalla M. DARWISH, Allan Burkett, Ashley Blackwell, Keylantra Taylor (Dillard U., New Orleans), Sergey Sarkisov (Huntsville, AL),
Darayas Patel (Oakwood U., Huntsville, AL), Brent Koplitz (Tulane U., New Orleans), David Hui (U. New Orleans)
A Comparative Study On Composites Based On Polyamide Matrices Reinforced With Carbon Fibres Giovanna COLUCCI, Oxana Ostrovskaya
(Politec. Torino, Italy), Davide Roncato, Brunetto Martorana (FIAT, Orbassano, Torino, Italy), Claudio Badini (Politec. Torino, Italy)
Hot-Pressed Alumina-Graphene Composites
P. Rutkowski, Gabriela GORNY, L. Stobierski, D. Zientara, W. Piekarczyk, K. Tran (AGH, Krakow, Poland)
Future Perspective For Nano Electronic Devices For System Application Hiroshi IWAI (Tokyo I.T., Japan)
Quality Assessment Approach Of NBR And FKM Elastomers Using Thermal Analytical Techniques
Achim Frick, Nouran KAOUD, Andrea Tomp (U. Aalen, Germany)
Thermomechanical And Frictional Behavior of TPU for Sealing Application Achim FRICK (Aalen U., Germany)
Piezoelectric Carbon Nanotube Tape for Sensor Applications Dennis S. Tucker (NASA Marshall SFC, Alabama)
Designation of All Optical Diodes With Nanostructures Huai-Yu WANG, Yu Liu (Tsinghu U., Beijing, China)
work in progress session Tuesday 1:00PM-2:00PM Lunch time, Student presentations
On The Effect Of Diamond-Shaped Holes On The Mechanical Properties Of Perforated Systems
Luke Mizzi1, Daphne Attard, Keith M. Azzopardi, Aaron R. Casha, Joseph N. Grima, Ruben Gatt (U. Malta)
Other presentations welcome
Session 3a
PHYSICS 1
Tuesday 2:00PM-4:00PM Room A Chairs: Seong Shan Yap, A. Darwish, co-chair: A. Zhukov,
Mean Free Path And Knudsen Diffusion In Hydrogen Selective Macroporous Alumina Membranes Graded With Boehmite Sol
Abubakar ALKALI, Edward Gobina (Robert Gordon U., Aberdeen,UK)
Nanocomposite Of Silica Coated By Cross-Linked Polymeric Ultrathin Film
Thirawudh PONGPRAYOON, Pornrat Sanitnon (King Mongkut U.T., Bangkok, Thailand), Pratharn Wongsiriwedh (Nat. Sci.Tech.,
Pratumthaness, Thailand), Kasinee Hemvichian, Phiriyatorn Suwanmala (Pragenburi, Thailand)
Growth and Characterization of MoS2 Nanostructures Grown by Pulsed Laser Deposition Anderson SUNDA-Meya (Xavier U., New Orleans)
Pulsed Laser Ablation of Cu2ZnSnS4 Nurul Suhada Che Sulaiman, Chen Hon Nee, Wee Ong Siew, Teck Yong Tou (Multimedia U., Selangor, Malaysia),
Seong Shan YAP (U. Malaya, Kuala Lumpur)
All-2D Semiconductor/Metal Contacts Udo SCHWINGEN-schloegl (U. Augsburg, Germany and KAUST, S. Arabia)
Study Of Interfacial Layer And Its Effect On Magnetic Properties Of Glass-Coated Microwires Arkady ZHUKOV (Basque Country U.,
San Sebastian, Spain), E. Shuvaeva, S. Kaloshkin, M. Churyukanova, E. Kostitcyna, V. Sudarchikova (Nat U.Sci.Tech., Moscow, Russia),
A. Talaat, M. Ipatov, Valentina Zhukova (Basque Country U., San Sebastian, Spain)
Studies of Magnetic Properties of Ni-Mn-In Heusler-Type Glass-Coated Microwires Valentina ZHUKOVA, M. Ipatov, A. Talaat, A. Granovsky,
J.J. del Val, Arkady Zhukov (Basque Country U., San Sebastian, Spain),
Magetism, Half-Metallicity and Electrical Transport Of Transition Metal-Doped Tellurides Shyamal K. BOSE (Brock U., St. Catharines, Canada),
Y. Liu (Yanshan U., Qinghuangdao, China), J. Kudrnovsky (Czech Acad Sci, Prague)
Session 3b
CHEM 1
Tuesday 2:00PM-4:00PM Room B Chair: Xiaolong Jia, co-chairs: Tugba O. Lekesiz, H. Iovu
Ionic Conjugated Polymer Nanoparticles And Their Application In Visualizing Cancer Cells Mohammed Bhuiyan, Jianhua Gong
(Utah State U., Logan), Rong Wang (Illinois Inst. Tech.), Pier Cristoforo Giulianotti, Enrico Benedetti (U.Illinois-Chicago), Liaohai Chen
(Utah State U., Logan)
Thermal Properties Of Organic-Inorganic Hybrid Materials Based On (Di)Glycidylether-Terminated Polydimethylsiloxanes / Epoxy Resins
Nicoleta Mihaela Florea, Adriana Lungu (U. Politeh. Bucharest, Romania), Dan Gabriel Ghiţa, Adrian Rotaru, Nicolae Marius Mărginean
(IFIN-HHB Bucharest, Romania), Horia Iovu (U. Politeh. Bucharest)
Study On The Electrochemical Modification Of Carbon Fibers Jie LIU, Xiuyan Zhou, Yan Xue, Jun Li, Jieying Liang (Beijing U. Chem.Tech., China)
Relationship Between The Thermal Stress Of Pan Fibers And The Structure And Properties Of The Resulting Carbon Fibers
Jie Liu, Huaguo Yu, Jie Liu, Yan Xue, Liangjun Li, Jieying Liang (Beijing U. Chem.Tech., China)
Effect of MWCNTs-EDA and MWCNTs-COOH on the Mechanical Properties Of Carbon Fiber Composites
Gang SUI, Qingjie Zhang, Xiaoping Yang (Beijing U. Chem.Tech., China)
Preparation and Characterization Of Polylactide/Montmorillonite Composites
Tugba Orhan LEKESIZ, Esra Ozdemir, Teoman Tincer, Jale Hacaloglu (METU, Ankara, Turkey)
Fabrication Of Poly(L-LACTIDE) Nanoparticles With Double Emulsion And Ultrasonic Atomization Based Spray Drying Processes
W.F. Huang, C.P. TSUI, C.Y. Tang, W.C. Law (Hong Kong Poly U., China)
Collagen-Based Nanocomposite Materials And Their Roles In Stem Cell Differentiation
Rong WANG, Indumathi Sridharan, Taeyoung Kim (Illinois I.T., Chicago)
Session 3c
MATH 3
Tuesday 2:00PM-4:00PM Room C Chair: Iliyas Raza, co-chairs: M.E. Toygar, Y.C. Wang
An Experimental Investigation On The Mechanical Performance Of The Glass/Epoxy Composites
Subjected To Thermal Aging Akar Dogan , Cesim Atas (Dokuz Eylul U., Izmir, Turkey)
Impact Response Of Sandwich Composite With Multi Cores
Aidel Kadum Jassim AL-SHAMARY, Ramazan Karakuzu, Okan Ozdemir(Dokuz Eylul U.,Turkey)
The Effects Of Transverse Impact And Tempererature On The Burst Pressure Of Composite Pressure Vessel Ibrahim Demir, Akar Dogan,
Volkan Arikan (DEU, Izmir, Turkey), Onur Sayman (Gediz U., Izmir, Turkey), Okan OZDEMIR (DEU, Izmir, Turkey)
Experimental And Numerical Impact Analyses Of Composite Plates Subjected To Low Velocity Impact Bulut BERK, Ramazan Karakuzu,
Bulent Murat Icten, Volkan Arıkan, Yusuf Arman, Cesim Atas, Aytac Goren (Dokuz Eylul U., Izmir, Turkey)
Impact Response of E-Glass Fiber Reinforced Thermoplastic and Thermoset Matrix Composites
Volkan ARIKAN (Dokuz Eylul U., Izmir, Turkey), Onur SAYMAN (Gediz U., Izmir, Turkey)
The Determination of Shear Stresses Between Interlaminar Face and Flexural Rigidity of Sandwich Composites
Farshid Khosravi Maleki, M. Evren TOYGAR (Dokuz Eylul U., Izmir, Turkey)
Linear Viscoelastic Properties Of Steel-Polymer Composites At High Frequencies
Yun-Che WANG, Chun-Yi Wu, Chih-Chieh Lu, Chung-Yu Yu (Nat. Cheng Kung U., Tainan) Fri
An Analytical Study on Quasi- Static 3-Points Bending Response of Multi-Layered Sandwich Panel
Iliyas RAZA, Hemang Gorasia, Stephanie Benedikt Günther, Joerg Feldhusen (Aachen U., Germany) Farshid Khosravi Maleki, M. Evren TOYGAR (Dokuz
Eylul U., Izmir, Turkey)
Linear Viscoelastic Properties Of Steel-Polymer Composites At High Frequencies
Yun-Che WANG, Chun-Yi Wu, Chih-Chieh Lu, Chung-Yu Yu (Nat. Cheng Kung U., Tainan) Fri
An Analytical Study on Quasi- Static 3-Points Bending Response of Multi-Layered Sandwich Panel
Iliyas RAZA, Hemang Gorasia, Stephanie Benedikt Günther, Joerg Feldhusen (Aachen U., Germany)
Session 3d
GENERAL 3
Tuesday 2:00PM-4:00PM
small room
Chairs: Daniela S. Mainardi, Luciano M.G. Vieira, co-chair Yong Ge
Characterization Of Physical Properties Of A Newly Discovered Bhimal Fibre Kishor Kalauni, K.M. GUPTA (Motilal Nehru Nat.Inst., Allahabad, India)
Flexural Behaviour Of Hybrid Sustainable Composites Reinforced With Silica Nanoparticles Luciano M.G.VIEIRA, J.C. Santos, A.L. Christoforo,
Tulio H. Panzera (UFSJ. Sao Joao del Rei, Brazil), J.C.C. Rubio (UFMG, Belo Horizonte, Brazil), F. Scarpa (U. Bristol, UK)
Fabrication Of A Hierarchical Gecko-Inspired Microarray By A Three-Dimensional Porous Nickeloxide Template
Enshuang ZHANG, Yuyan Liu, Youshan Wang, Zhimin Xie (Harbin Inst.Tech., China)
Formation Of Micro/Nano-Scale Patterns Atop Shape Memory Polymers
Tong LV, Yuyan Liu, Zhimin Wan,Hongjun Kang,Huifeng Tan (Harbin Inst Tech., China)
Sensitivity Of Carbon Fibre/Silicon Rubber Composites For Concrete Structural Health Monitoring In Bending
Yong GE, Yongquan Zhang, Lili Yang (Harbin Inst.Tech., China)
Acoustic Emission Monitoring Of Damage Initiation In Flexural Tests Of GFRP Composites Tomasz Spodaryk (Anga, Poland), Maciej Panek
(Wroclaw U.T., Poland), Krzysztof J. KONSZTOWICZ (U. Bielsko-Biala, Poland)
Nano-Engineered Fischer-Tropsch Catalysts for Synfuel Production Fernando A. Soto, Suraj Gyawali, Purnima Karidehal, Daniela S. MAINARDI(Louisiana Tech)
Effect of Structural Integrity on Electron Transport in Nanocomposites Taylor Tarlton , Joshua Brown, Benjamin Beach (Louisiana Tech., Ruston),
Pedro Derosa (Louisiana Tech., and Grambling State U.)
Session 4a METAL 1
Tuesday 4:10PM-6:10PM Room A
Chair: Song Jeng Huang, co-chairs: W. Weglewski, B. Ballokova
Mechanical Properties Enhancement of Hot Extruded Tubes Made from Particle Reinforced AM60/Nano-Al2O3p Magnesium Matrix
Composites Song-Jeng HUANG (Nat. Taiwan U.Sci.Tech.), Jong-Ning Aoh, Yang-Chen Liu (Nat.Chung Cheng U.), Reshef Tenne
(Weizmann Inst., Israel)
On Thermal Residual Stress In Metal/Intermetallic-Matrix Composites – Numerical Prediction And Experimental Verification
Witold WEGLEWSKI, Michal Basista (IPPT, Warsaw, Poland)
Influence Of Sand Particles On The Corrosion Of Steel In Concrete
Raja Rizwan HUSSAIN, Abdulrahman Alhozaimy, Abdulaziz Al Negheimish (King Saud U., Riyadh, S. Arabia)
Development and Characterization of AA6061 Matrix Composites Reinforced With Halloysite Nanoparticles
Blazej Tomiczek, Leszek A. DOBRZANSKI, Lukasz Reimann, Wojciech Pakieła (Silesian U.T., Gliwice, Poland)
Failure Mechanism Of Cu-Al2O3 Micro And Nanomaterials Observed by "In-Situ Tensile Test In SEM" Michal BESTERCIA,
Oksana Velgosova (Inst.Mat.Res., Kosice, Slovak Rep.), Jozef Ivan (Bratislava, Slovak Rep.), Katarína Sülleiova (Kosice, Slovak Rep.)
Microstructure, Mechanical Properties And Fracture Of Mg-Al2o3 Nano Composites Beata BALLOKOVA, Martin Balog, Michal Besterci,
Katarina Sulleiova (Slovakia Acad Sci,Slovakia), Song-Jeng Huang (Nat. Taiwan U., Taipei)
Manufacture and Properties of MMCs based on TaC and Al, Cu or Au O. Kish, Nathalia FROUMIN, M. Aizenshtein, N. Frage (BGU, Israel)
Session 4b NOVEL MAG 1 (organized by THO)
Tuesday 4:10PM-6:10PM Room B Chair: K. Tanaka, S. Nakashima
Chair: Paolo Mele
Nanostructure and Pinning Performance of YBa2Cu3Ox Thin Films Added With Y2O3 Nanoparticulate Paolo MELE (Hiroshima U., Japan) ,
R. Guzman, J. Gazquez, T. Puig, X. Obradors (ICMAB-CSIC, Barcelona, Spain), S. Saini (Hiroshima U., Japan), Y. Yoshida
(Nagoya U., Japan), M. Mukaida (Kyushu U., Japan), A. Ichinose (CRIEPI, Japan), K. Matsumoto (Kyushu I. T., Japan) invited
Electromechanical Analysis Of The Nb3Sn Wires And Cables For The ITER Project M. Breschi, P.L. Ribani (U. Bologna, Italy)
Magnetic Fluorescent Nanoparticles For Biomedical Applications
Fabio CANEPA, P. Riani, M.A. Lucchini (Genova U., Italy)
The Potential for Development of Super-Strong Nanocomposite Magnets George C. HADJIPANAYIS (U. Delaware)
Exchange Interactions In Molecular Beam Epitaxy (MBE) Grown Magnetic Nanostructures L. Tomasz Baczewski (IFPAN, Warsaw, Poland),
K. Mergia (NCSR Athens, Greece), A. Petroutchik, A.Wawro (IFPAN, Warsaw, Poland), J. Kisielewski, A. Maziewski (U. Bialystok, Poland),
F. Ott (CAE, Saclay, France) invited
Recent Progress in Modeling Electronic Structure and Spectroscopy of Topological Insulators and Novel Superconductors
Arun BANSIL (Northeastern U., Boston, MA)
Are ZnMnO and ZnCoO Samples Really Ferromagnetic? Marek GODLEWSKI, M.I. Lukasiewicz, A. Wojcik-Głodowska, B.S. Witkowski,
W. Knoff (Inst.Physics, Polish Acad Sci, Warsaw)
Session 4c MATH 4
Tuesday 4:10PM-6:10PM Room C Chair: Samuel I. Ibekwe
A New Hybrid Impact Tolerant Sandwich Core
Samuel I. IBEKWE (Southern Univ Baton Rouge, LA), Gefu Ji (Louisiana St.U.), Guoqiang Li (LSU and SUBR)
Polymer Matrix Composites: Performance Enhancement Through Viscoelastically Generated Prestress Adnan FAZAL, Kevin Fancey
(U. Hull, UK)
Free Vibration Of Thin Walled Composite Beams With Arbitrary Closed Cross-Section
M. Gökhan GÜNAY, Taner Timarci (Trakya U., Edirne, Turkey)
Characterization Of Stochastic Honeycombs Megan Hostetter, Glenn HIBBARD (U. Toronto, Canada) invited
Mechanical Properties of Sandwich Plate
Ali TIAN, Rechuan Ye, Chaoming Shen (Jiangsu U. Sci.Tech., Zhenjiang, China)
Nonlinear Responses Of Supported Nanotubes Conveying Fluid Based On Nonlocal Elasticity Theory
HuLiang Dai, Qiao NI, Qin Qian, Lin Wang (Huazhong U. Sci.Tech., Wuhan, China)
Two Locally Resonant Band Gaps Of A Periodic Tube Induced By Different Mechanisms
Hongping HU, Ziyang Lian, Yuantai Hu (Huazhong U.Sci.Tech., Wuhan, China)
Session 4d GENERAL 4
Tuesday 4:10PM-6:10PM
small room Chair: Myung Chul Kang, co-chairs: C. Friedrich, I. Chirica
Alumina Nanofibers Obtained From Poly(Vinyl Alcohol)/Boehmite Nanocomposites And Their Uses
Koji NAKANE, Nobuo Ogata (U. Fukui, Japan)
Failure Relevance And Determination Of Preload Relaxation In Bolted Joints Using Composite Materials
Christoph FRIEDRICH, H. Hubbertz (U. Siegen, Germany)
Omnidirectional Light Absorption by Large Scale Hierarchical Structures on Cu(In,Ga)Se 2 Solar Cell
Yu-Lun Chueh (Nat. Tsinghua U., Hsinchu)
Synthesis Of Gold Nanostructures And Its Electroanalytical Applications
Ashok Kumar DAS, Rama K. Layek, Nam Hoon Kim, Joong Hee Lee (Chonbuk Nat U., S. Korea)
Enhanced Hydrogen Gas Barrier Property Of Polyethyleneimine Modified Graphene Oxide Coated
Film Woong Bi PARK, Nam Hoon Kim, Joong Hee Lee (Chonbuk Nat U., S. Korea)
Essential Work Of Fracture Toughness And Mechanical Properties of Recycled PA 6
Okan GUL , Sinan Yilmaz, Taner Yilmaz (Kocaeli U., Turkey)
Grounding Simulations Of Ship Hull Sandwich Structure
Ionel CHIRICA, Ionel Gavrilescu, Elena-Felicia Beznea (U. Dunarea Galati, Romania), Vasile Giuglea (Galati, Romania)
The Role Of Electric Charge And Self-Polarization For The Formation And Behaviour Of Non-Spherical Nanoparticles
Nikunjkumar Visaveliya, Andrea Knauer, J. Michael KOEHLER (TU Ilmenau, Germany)
Session 5a BIO 2
Tuesday 6:20PM-8:20PM Room A
Chair: Mariana Ionita, co-chairs: G. Slawinski, M. Patila, H. Iovu
Numerical Simulations Of The Influence Of Blast Wave On Human Body
Tadeusz Niezgoda, Grzegorz SLAWINSKI (Military U.T., Warsaw, Poland)
Spectroscopic And Thermal Contributions Regarding The Synthesis Of Betulonic Acid By Selective Oxidation Of Betulin
Adriana FULIAS (U. Medicine & Pharm, Timisoara, Romania), Vasile Bercean (Politeh. U. Timisoara, Romania), Gabriela Vlase, Titus Vlase
(West U. Timisoara), Ionuţ Ledeti (U. Medicine & Pharm,, Timisoara, Romania)
Amino Acid-Based Bioresorbable Poly(Ester Amide)S: Promising Materials For Constructing Drugdelivering Nanocarriers
Sophia KOBAURI (Agricultural Univ., Tbilisi, Georgia), Vladimir P.Torchilin (Northeastern U., Boston, MA), David Tugushi,
Ramaz Katsarava (Agricultural Univ., Tbilisi, Georgia),
Composites Of Live Cells: Cell Adhesion , Attachment And Properties Dan Davidov (Hebrew U. Jerusalem, Israel)
Continuous Hydrothermal Synthesis Of Functional-Hydroxyapatite Rods And Plates For Biomedical Applications Miquel GIMENO-Fabra
(U. Nottingham, UK), Selina V. Tang (Nottingham, UK), Edward H. Lester, David M. Grant (U. Nottingham, UK)
Porous Chitosan/Graphene Oxide Biomaterials With Potential Application In Bone Regeneration
Mariana IONITA, Andreea Madalina PANDELE, Horia IOVU (U. Politeh Bucharest, Romania) chair
Camelina Oil-Based Hydrophilic Monomers For Novel Polymeric Materials Brindusa BALANUCA, Raluca Stan, Anamaria Hanganu, Adriana Lungu,
Horia Iovu (U. Politeh. Bucharest, Romania)
Immobilization Of Enzymes On Carbon-Based Hybrid Nanomaterials For The Development Of Effective Nanobiocatalytic Systems
Michaela PATILA, George Orfanakis, Petros Katapodis, Angeliki Polydera, Dimitris Gournis, Alkiviadis S. Paipetis, Haralambos Stamatis (U. Ioannina, Greece)
Session 5b TEXTILE 1
Tuesday 6:20PM-8:20PM Room B
Chairs: Mizi Fan, K. Salasinska
Impact Properties Of Newly Developed Multistitched Woven Preform/Nano Composites Kadir BILISIK, Gaye Kaya (Erciyes U., Turkey)
Properties And Dimensional Stability Of Natural Fiber Composites With Sunflower Husk
Kamila SALASINSKA, Joanna Ryszkowska (Warsaw U.T., Poland)
Characterisation of Fire Resistance of Natural Fibre Composites Mizi FAN, Alex Naughton (Brunel U., UK)
Experimental Investigation Of The Mechanical Parameters Of Fibers And Matrixes Of Bamboo
Baolu SHENG , Dongsheng Huang (Nanjing Forestry U, China)
A Novel Model To Predict The Bending Performances Of PSL Beams
Yuling Bian (Nanjing Forestry U., China), Dongmei Huang (Suzhou, China), Baolu Sheng, Dongsheng HUANG (Nanjing Forestry U.)
The Energy Absorption Of Environmentally-Friendly Structures Based On Bamboo Tubes Mohd Zuhri MOHAMED-Yusoff, Zhongwei Guan
(U. Liverpool, UK), Wesley J. Cantwell (U. Liverpool, UK and Khalifa U.Sc.Tech., UAE)
Characterization Cellulose Micro Particles From Cotton Waste Magdi El-MESSIRY (Alexandria U., Egypt)
Nanoindentation Properties Of Polylactic Acid Composite Films Reinforced With Jute Fibers Of Different Size
Vijay BAHETI, Jiri Militky, Rajesh Mishra, Blanka Tomkova (TU Liberec, Czech Rep.)
Session 5c
MATH 5
Tuesday 6:20PM-8:20PM Room C
Chair: Marino Quaresimin, G. R. Baran
A Model For The Prediction Of The Crack Density Evolution In Multidirectional Laminates Under Fatigue Loading
Marino QUARESIMIN, Paolo Andrea Carraro (U. Padova, Italy)
Molecular-Dynamic Research Of Free Surfaces And Interfaces Influence On The Nanostructure Deformation Process
Elena GOLOVNEVA, Igor Golovnev, Vasily Fomin (Novosibirsk, Russia),
Molecular Dynamics Simulation Of High Frequency Electric Polarization Of Carbon Nanotube Array Based Polymer Nanocomposites
Viatcheslav V. BARKALINE, A. Pletezhov (Belarusian Nat.T.U., Belarus)
A Fracture Mechanics-Based Micromechanical Model For The Fatigue Behavior Of Fibre Reinforced Materials
Roberto Brighenti, Andrea Carpinteri, Daniela SCORZA (U. Parma, Italy)
Studies On Dynamic Constitutive Behavior and Damage Evolution Of Polymer Composites By SHPB Combining With Other Techniques
Lili WANG (Ningbo U., China)
Multiscale Modeling of a Nacre-Inspired Polymer-Matrix Composite
W. Wang, K. Kistler, Keya SADEGHIPOUR, S. Sieburth, George R. BARAN (Temple U., Philadelphia, PA)
On The Fracture Mechanics and Nanocomposite Applications Refat El-SHEIKHY, Mosleh Al-Shamrany (KSU, S. Arabia)
Thermal And Mechanical Properties Of Ureaurethane Elastomer Composites With Hollow Glass Spheres
Kamila PIETRZAK, Michał Chrzaszcz, Joanna Ryszkowska (Warsaw U.T., Poland)
Session 5d
GENERAL 5
Tuesday 6:20PM-8:20PM small room Chairs: Ladislav Celko, N. Seetala
Influence Of Technological Parameters On A Quality Of Atmospheric Plasma SprayedAl 2O3+13% TiO2 and Cr2O3 Coatings
D. JECH, Ladislav Celko, L. Klakurkova, K. Slamecka (Brno T.U., Czech Rep.), E. Dvoracek (Brno), J. Svejcar (Brno T.U., Czech Rep.)
Formation Of Aluminide Diffusion Coatings By Powder Mixture CVD Process
Miroslava HORYNOVA, Celko Ladislav, Jech David, Klurkova Lenka, Svejcar Jiri (Brno T.U., Czech Rep.)
Formation And Growth Of Thermally Grown Oxide In Two Different Atmospheric Plasma Sprayed Thermal Barrier Coating Systems
Ladislav CELKO, David Jech (Brno U.T., Czech Rep.), Tomas Chraska (ASCR, Prague, Czech Rep.), Lenka Klakurkova, Karel Slámecka, Zdenek Spotz
(Brno U.T.), Jiri Dubsky (ASCR), Jiri Svejcar (Brno U.T.)
Spark Plasma Heat Treated Coarse and Nano-Powder ZrB2-SiC and HfB2-SiC Composites for Ultra High Temperature Aerospace Applications
Naidu V. Seetala, Marquavious T. Webb (Grambling State U., LA), Lawrence E Matson (Wright Patterson AFB, Ohio), HeeDong Lee
(UES, Dayton, Ohio), Carmen M. Carney (WPAFB, Ohio), Thomas Key (UES, Dayton) chair
Structure And Properties Of Gasdynamic Coverings
Maxim PUGACHEV, Gennady Moskvitin, Vladimir Arhipov, Anatoly Londarsky , Melshanov Askold (Russian Acad Sci, Moscow)
Mechanical Characteristics Of Gasdynamic Coverings
Gennadii MOSKVITIN, Vladimir Arhipov, Anatoly Londarsky , Melshanov Askold, Maxim Pugachev (Russian Acad Sci, Moscow)
Structural And Morphological Characterization Of The Interphase Region Between Two Thermoset Resins
Wael BALLOUT, B. Coulon, D. Magnin, P. Lipnik, Q. Voleppe, P. Van Velthem, C. Bailly, M. Sclavons (U. Cath. Louvain, Belgium)
Electromagnetic Interference Shielding Effectiveness of Hybrid Fillers-reinforced Epoxy Matrix Composites Woong Han, Woong-Ki Choi,
Won-Seok Kim (Korean Inst Carbon, Jeonju, S. Korea), Lee-Ku Kwac, Hong-Gun Kim (Jeonju U., S. Korea), Byung-Joo Kim,
Kay-Hyeok An (Jeonju, S. Korea)
Electrochemical Performance of Polymer-based Activated Carbons for EDLCs Hye-Min Lee, Byung-Joo Kim, Woong-Ki Choi, Won-Seok Kim
(Korea Inst. Carbon, Jeonju, S. Korea), Lee-Ku Kwac, Hong-Gun Kim (Jeonju U., S. Korea), Kay-Hyeok An (Jeonju, S. Korea)
Session 6a BIO 3
Wednesday 9:00AM-11:00AM
Room A Chair: Dimitris S. Argyropoulos, A.M. Korsunsky, co-chairs Horia Iovu, M. Ionita
Human Dental Tissues As Hierarchical Natural Nanocomposites: Multi-Scale Modelling and X-Ray Scattering Analysis
Tan Sui, Michael A. Sandholzer, Nikolaos Baimpas, Alexander J.G. Lunt, Igor P. Dolbnya, Jianan Hu, Anthony D. Walmsley, Philip J. Lumley,
Gabriel Landini, Alexander M. KORSUNSKY (Oxford U., UK)
New Cryogel Nanomaterials Based On Polyvinyl Alcohol And Halloysite
Adi GHEBAUR, S.A. Garea, E. Vasile, H. Iovu (U. Politeh. Bucharest, Romania)
Improving The Thermal And Mechanical Properties Of Polysulfone By Incorporation Of GrapheneOxide
Mariana IONITA, Madalina Pandele, Livia Crica, Horia Iovu (U. Politeh Bucharest, Romania)
Epoxy Biocomposites Reinforced By Cellulose Microfibres Modified by Cold Plasma
Magdalena URBANIAK, Andrzej K. Bledzki (West Pomeranian U.T., Szczecin, Poland)
Directed Modification Of Chitin Derivatives For Control Drug Delivery Maria MUCHA, Iwona Socha Michalak (Lodz U.T., Poland)
The Use Of Cellulose Nanocrystals As Scaffolds For Nanodevices; Supramolecular Chemistry Using Nature’s Most Abundant Template
Dimitris S. ARGYROPOULOS, H. Sadeghfifar, I. Filpponen (North Carolina St.U., Raleigh) invited
Types And Applications Of Biosensors Elitsa GIEVA, Georgi Nikolov (TU Sofia, Bulgaria)
Development Of Technology For The Preparation Of Crystalline Nanostructured Forms Of Biologically Active Compounds
A.K. Nazarov, I.S. Levina, G.V. Nazarov, I.V. ZAVARZIN (Zelinsky Inst.Org.Chem., RAS, Moscow, Russia) ppp
Session 6b MAT CHEM 2 (organized by THO)
Wednesday 9:00AM-11:00AM
Room B Chair: M. Miyao, R. Matsumura
co-Chair: T. Endo T. Suzuki
Electron Beam Irradiated Adhesion Between Polyurethane And Aluminum Sheet
Masae KANDA, Yusuke Miyazawa, Masato Uyama, Yoshitake Nishi (Tokai U., Kitakaname, Japan)
Effects of Homogeneous EB-Irradiation Prior to Hot Press on Adhesion Force of PTFE/Medical Polymers
Chisato KUBO, Takumi Okada, Masato Uyama, Masae Kanda, Yoshitake Nishi (Tokai U., Kitakaname, Japan)
Cost Reduction by Sandwiching Inexpensive Cores between CFRP Laminate Plies Takumi OKADA, Junhua Quan, Naoya Tsuchikura,
Shinichiro Nanba, Tatsuya Yamamoto,Michael C. Faudree, Yoshitake Nishi (Tokai U., Hiratsuka, Japan) student
Carbon Fiber Volume Fraction Dependent Mechanical properties of Metal/CFRP Joint
Shigehito INUI, Syouta Torikai, Kazuma Shiraishi, Syou Ishii, Atushi Kasai, Noriyoshi Miwa,
Keisuke Iwata, Yoshitake Nishi (Tokai U., Kitakaname, Japan) student
Tailored Microstructure of Laminar Ceramics by Using Electric and Magnetic Fields
Tohru S. SUZUKI, Tetsuo Uchikoshi, Yoshio Sakka (NIMS, Tsukuba, Japan) invited
Recent Developed Surface and Bulk Strengthening of FRPs Yoshitake NISHI, Takumi Okada, Hiroaki Takei, Keisuke Takata, Mitsuru. Hirano,
Hiroyuki Kobayashi, Akihiro Mizutani, Keisuke Iwata (Tokai U., Hiratsuka, Japan) , Michell Salvia (Ecole Central Lyon, France), Michauel C. Faudree
(Tokai U., Hiratsuka, Japan) invited
Breaking Of Ether Bonding Of PET By Plasma Irradiation And Its Recovery By Heating Characterized By ATR-FTIR Miyoshi Yokura,
Toshiki Mori, Hiroyuki Takijiri, Hiroki Yamamoto, Kazuki Yamaji, Kenta Inagaki, Kazuya Hanada (Mie U., Japan), David Hui (U. New Orleans),
Abdalla Darwish (Dillard U., New Orleans), Mircea Chipara (U. Texas Pan Am., TX), Paolo Mele (U. Hiroshima, Japan), Kazuhiro Endo
(Kanazawa I.T., Japan), Tamio ENDO (Mie U., Japan) invited
Session 6c MATH 6
Wednesday 9:00AM-11:00AM Room C Chair: Marina Shitikova, Nicholas Fantuzzi
Experimental And Damage Analysis Of Filament Wound Pressure Vessel With Metal Liner Junqing ZHAO, Zhenqing Zhu (Harbin I.T.., China)
Constitutive Modeling Of Carbon Black Reinforced Rubber Composites
Mikhail ITSKOV, Roozbeh Dargazany, Khiêm Ngoc Vu (RWTH, Aachen U., Germany)
Design Considerations Of Next Generation Chemical Mechenical Planarization Equipment
Haedo JEONG (Pusan Nat. U., S. Korea), Hon-Zong Choi (KITECH, Ansan, S. Korea)
Transient Wave Velocities In Thin-Walled Beams Of Open Profile With Cosserat-Type Micro Structure
Yury Rossikhin, Marina SHITIKOVA (Voronezh GASU., Russia)
Mathematical Model of SWNT in the Framework Of The Gradient Theory Of Adhesion Petr A. BELOV (Yandex, Russia)
Supercritical Fluids For The Energy and Environmental Applications Vladimir I. Anikeev (NSK, Russia)
Mechanical Behavior Of Metal Foam Sandwich Structure Under Impact Xinzhu WANG (Chongqing U., China)
Dynamics Of The Funtionally Graded Material Bars: Spectral Element Modeling and Analysis
Minwoo Hong, Usik LEE (Inha U., Incheon, S. Korea)
Dynamic And Static Behavior Of Arbitrarily Shaped Laminated Composite Plates Via Strong Formulation Finite Element Method
Nicholas FANTUZZI, Francesco Tornabene, Erasmo Viola (U. Bologna, Italy)
Session 6d GENERAL 6
Wednesday 9:00AM-11:00AM small room Chair: Anna Sulkowska, A.S. Paipetis
On Characterizing Microscopically The Adhesion Interphase For The Adhesion Between Brass-Plated Steel Cords With Different Cu Content
And Rubber Compounds Containing Different Loading of Co Salt Gyung-Soo JEON (Jeonnam Prov. College, S. Korea)
Some Properties Of Polyurethane-Rubber Composites Obtained From Waste Polymeric Materials
Anna SULKOWSKA, Gabriela Bartecka, Wioletta Famulska, Wieslaw W. Sulkowski (U. Silesia, Poland)
Nanotechnology: Challenges to Climate Change and Biodiversity Loss Shahriar HOSSAIN (ESDO, Lalmatia, Dhaka, Bangladesh)
On The Utilization Of Some Unused Solid Waste Materials In Egypt: A Comparative and An Economic Study
EL-Sayed M.A.RASSOUL (Egypt)
Energetic Particle Induced Nanostructures Bernd RAUSCHENBACH (Leipzig, Germany)
Electrical Damage Assesment Of Nanocomposites: DC and AC Study
Dimitrios BEKAS, Christina Couimtzi, Aris Bousis, Alkiviadis S. Paipetis (U. Ioannina, Greece)
The Reinforcement Effect Of Carbon Nanotubes In The Interlaminar Fracture Toughness Of A Typical CFRP System
Giorgos GKIKAS, Dimitrios Bekas and Alkiviadis S. Paipetis (U. Ioannina, Greece)
A Study Of Interfacial Properties Of Hierarchical Composites At The Single Fiber Level
K. TSIRKA, V. Spais and A. S. Paipetis (U. Ioannina, Greece)
ICCE-22 Malta
Session 7a INFRASTR 2
Wednesday 11:00AM-1:00PM Room A Chair: Hee Sun Kim, Luciano Feo
The Effect Of Amorphous Kaolin On Properties Of Cement-Based Composites Dragica JEVTIC (U. Belgrade, Serbia), A. Mitrovic,
Lj. Milicic (Beograd, Serbia), A. Savic (U. Belgrade, Serbia)
Comparative Study Of Mechanical Properties Of Bamboo Laminae and Their Laminates With Woods And Wood Based Composites
Chandra S. VERMA, V.M. Chariar (Indian Inst.Tech., Delhi)
Creep Response of GFRP–Concrete Hybrid Structures: Application To A Footbridge Prototype Jose GONILHA (IST, Portugal)
Ultimate Axial Stress And Strain Of Partially Frp Wrapped Reinforced Concrete Columns Garyfalia G. TRIANTAFYLLOU,
Theodoros C. Rousakis, Athanasios I. Karabinis (DUTH, Xanthi, Greece)
FRP and FR Confining Effects On Concrete Sections Subjected To Cyclic Axial Compressive Loading
Theodoros ROUSAKIS (D.U.Th., Xanthi, Greece), Maria Gkouma (U. Manchester, UK)
Electrical Conductivity Study Of Cement Based Nanocomposites
P. Dalla, I.Tragazikis, A. Paipetis, K. Dassios, T. E. Matikas (U. Ioannina, Greece)
Acoustic Emission Monitoring Of The Mechanical Behavior Of Cement Nanocomposites Under Bending Ilias TRAGAZIKIS, P. Dalla,
P. Alafogianni, D. Exarchos, K. Dassios,N.-M. Barkoula, T.E. Matikas (U. Ioannina, Greece)
Compressive Strength of Concrete Mixed With Phase Change Material (PCM) Under Thermal Changes
Hee Sun KIM, Hae Won Min, Eunmi Ryu, Ah-Young An (Ewha Womans U., Seoul, S. Korea) chair
Session 7b OXIDE 2 (organized by THO)
Wednesday 11:00AM-1:00PM
Room B
Chair: T. Endo, H.-U. Habermeier co-chairs: Mark Auslender, Leonid Chernyak
Magnetic Resonance Studies of La1−x CaxMnO3: Nano Versus Bulk
E. Rozenberg, A.I. Shames, Mark AUSLENDER (Ben-Gurion U., Beer-Sheba, Israel)
Hydrothemal Synthesis Metal Oxide Nanomaterials In Supercritical Water Vladimir I. ANIKEEV (NSK, Russia)
Preparation, Structure and Mechanical Characterization of (Cu/Co) Co-doped ZnO Nano-Particles
L. ARDA, D. Akcan (Bahcesehir U., Istanbul, Turkey), S. Ataoglu, Cengiz Ipek (Istanbul T.U., Turkey)
Structural, Optical And Electrical Properties of Er-doped ZnO Nano-Particles And Films
A.Donmez (Istanbul T.U., Turkey), L. Arda, ,D. Akcan (Bahcesehir U., Istanbul, Turkey), S. Ozturk
(Gebze I.T., Kocaeli, Turkey), C. Ipek, S. Ataoglu (Istanbul T.U., Turkey)
Fabrication Of Multifunctional Silica Microbelt With The Novel Stacked Structure By Electrospinning
Technique Yongtao Yao, Jinsong Leng, Haibao LU (Harbin I.T., China)
Studies Of Electron Trapping Effects In ZnO-Based Semiconductors For Optoelectronic Applications
Leonid CHERNYAK (U. Cen. Florida, Orlando)
Session 7c MATH 7
Wednesday 11:00AM-1:00PM
Room C
Chairs: Xuan-Hung Nguyen, R. Capozucca, co-chair: J. H. Hattel
Study On The Effect Of Multiwalled Carbon Nanotubes With Cement Particles Of Less Than 75 microns
Srinivasan KANDASWAMY (PMU, Thanjavur, India)
Vibration of Beams with NSM CFRP Rods Roberto CAPOZUCCA, S. Bossoletti (Università Politecnica delle Marche, Italy)
Novel Computational Aspect In Multiplayered Plate and Shell Structures Using Isogeometric Analysis
XuanHung NGUYEN (HCMUS, Hochiminh city, Vietnam)
Use Of The Incremental Mean-Field Formulation For Constitutive Modeling Of Elastic-Plastic Composites: Application To Unidirectional
Long Fibers Reinforced Polymer W.L. Azoti (Public Res.Cen., Luxemburg), A. Tchalla (U. Lorraine, Metz, France), Y. Koutsawa,
Ahmed MAKRADI, S. Belouettar (Public Res.Cen., Luxemburg)
Measuring The Dependence Of The Local Young’s Modulus On Porosity Of Particulate Reinforced Metal Matrix Composites By The Pulsed
Acoustic Method With A Laser Source Of Ultrasound Alexander KARABUTOV, Natalia Podymova (Lomonosov Moscow State U., Russia)
Mechanical Properties of an Octahedral Stitched Sandwich Composite
Lu Che, Guodong Xu, Tao ZENG, Su Cheng, Xinwei zhou, Shucai Yang (Harbin U.Sci.Tech., China)
Numerical Process Simulations For IndustriallyPultruded Profiles
Ismet Baran, Jesper H. HATTEL (TU Denmark, Lyngby), Remko Akkerman (U. Twente, Netherlands)
An Implicit Secular Equation For Rayleigh-Edge Waves In Thin Composites Jan CERV, Frantisek Vales (ASCR, Prague, Czech Rep.)
Session 7d GENERAL 7
Wednesday 11:00AM-1:00PM
small room Chair: Shinhoo KANG, co-chairs: S. Kang, H. Zhu
Wear-Resistant Aluminum-Matrix Composites N.P. GULBINA, Victor N. Gulbin, M.V. Gorshenkov, N.S. Kolpakov (MISA, Moscow, Russia)
Ultrasound Driven Self-Assembly Of Lignin Into Microcapsules For Storage And Delivery Of Hydrophobic Molecules
Claudia CRESTINI, Maria Rosaria Tortora, Francesca Cavalieri (Tor Vergata U., Rome, Italy), Pasquale Mosesso (U. Tuscia, Viterbo, Italy)
The Functional Composites Filled With Carbon Nano-Materials Victor GULBIN, Nikolay Kolpakov, Victor Polivkin (Moscow, Russia)
Processing and Properties of W-ZrC Composites for High-Temperature Applications Shinhoo KANG (SNU, S. Korea)
Positive Effect Of Prestressing On Fire Resistance Of Concrete Bending Components Reinforced With FRP Bars
Hong ZHU, Guanlin Zhu Kang Hu Wei Zhang (Southeast U., Nanjing, China)
A Study On Optimization Of A Glass/Carbon Fiber Reinforced Hybrid Composite Automotive Bumper Beam
Do-Hyoung Kim, Hee-Joon Ahn, Hak-Sung KIM (Hanyang U., Seoul, S. Korea)
Assessment Of A Modelling Method For Composite Bonded Joints Using Cohesive Elements Method
David DELSART, Gerald Portemont, Alain Deudon (ONERA, France)
Mechanical And Physical Properties Of Polypropylene-Carbonnano-Tubes Composites For Wind Turbine Blades Fabrication
Osama Al-QABANDI (Glasgow Caledonian U., Scotland, UK), Salah Al-Enezi (Kuwait Inst.Sci.Res.), Anjali De Silva (Glasgow C. U.),
M. Bassyouni (King Abdulaziz U., S. Arabia)
work in progress session Wednesday 1:00PM-2:00PM Lunch time, Student presentations
On the Mechanical Properties of Ceramic Type Frameworks
Darryl Gambin, Ruben Gatt, Keith M. Azzopardi, Joseph N. Grima (U. Malta)
On the Effect of Non-Perfections on the Mechanical Properties of Siliceous NAT
Ruben Gatt, Jan Dariusz Cutajar, Keith M. Azzopardi, Joseph N. Grima (U. Malta)
Other presentations welcome
ICCE-22 Malta
Session 8a PHYSICS 2
Wednesday 2:00PM-4:00PM Room A
Chair: Esther M. SULMAN, co-chairs: L. Nanai, R.L.Khalfin
Electrical Conductivity and Dielectric Constant of Hot Pressed MWCNTs/ Carbon Nano Fibril Composite Ashraf A. Ali (Zagazig U., Egypt),
M.M.Eltabey, Badr.M. Abdelbary (Menoufiya U., Egypt), Said H. ZOALFAKAR (Higher Tech Institute, Ramadan City, Egypt)
Magnetic-Separable Oxidoreductases As New Concept In Enzymatic Oxidation
Olga V. Matveeva, Natalya V. Lakina, Valentine Yu. Doluda, Esther M. SULMAN (Tver Tech Univ., Tver, Russia)
Electric Conductivity of Polymer Composites Pyrolysed at High Temperatures Jimsher N. ANELI (Inst. Machine Mech., Tbilisi, Georgia),
M. Ben-Haim (Ariel Univ.Center, Ariel, Israel), T.M. Natriashvili (Tbilisi, Georgia)
The Mechanism Of Absorption And Intracellular Transport Of Rare Earth-Based Fluorescent Nanocrystals
Michal M. GODLEWSKI, Jaroslaw Kaszewski, Anna Szal, Anna Slonska, Malgorzata A. Domino (Warsaw U. Life Sciences),
Marek Godlewski (Polish Acad Sci, Warsaw)
Dember Voltage Formation And THz Range Oscillations In Oxide Semiconductors Due To FS Laser Pulse Interaction
Laszlo NANAI, M. Fuele, Zs. Benko, S. Szatmari (U. Szeged, Hungary)
Characterization of Copper Nitride Thin Films Prepared by RF Magnetron Sputtering
Abdullahi A. KOGO (Ahmadu Bello U., Zaria, Nigeria), T.H. DARMA (Bayero U., Kano, Nigeria)
Lattice Thermal Conductivity In Graded-Type Porous Thermoelelectric Materials
Dimitris G. Niarchos, Roland H. Tarkhanyan, Alexandra IOANNIDOU (NCSR, Athens, Greece)
Small Angle Neutron And X-Ray Diffraction Of The True Molecular Solutions Of Natural Cellulose
D.M. Rein, Rafail L. KHALFIN, Y. Cohen (Israel I.T., Haifa)
Session 8b CHEM 2
Wednesday 2:00PM-4:00PM Room B
Chair: Hans-Joerg Fecht, co-chairs: J. Hacaloglu; P. Mele
Composites From Incompatible Polymer Pairs: Silicone Elastomers As Disperse Phase Or Matrix Carmen RACLES, Maria Cazacu, M
ihaela Alexandru, Adrian Bele,Valentina Musteata, Florica Doroftei (ICMPP, Iasi, Romania)
Exchange Interaction In Lanthanide-Based Molecular Materials Liviu F. CHIBOTARU (KU Leuven, Belgium)
Photochemical Nanostructured Systems For Information And Light -Modulating Optical Devices Valery A. BARACHEVSKY, A.O.Ayt,
O.I. Kobeleva, A.M. GoreliK, M.M. Krayushkin, V.V. Kiyko, V.P. Grachev (Russian Acad Sci, Moscow)
Catalyzer For New Microtopography Of Polypyrrole Yanbin Li (Southwest Jiaotong U., China)
Grain Size Dependence Of The Mechanical Properties Of Nanocrystalline Diamond Layers Hans-Joerg Fecht (U. Ulm, Germany)
Impact Of Polyvinyl Alcohol On The Physico-Chemical Properties Of Some Functionalized Polysulfones
Anca FILIMON, Ecaterina Avram (Inst.Macro Chem., Iasi, Romania)
Investigation Of Acoustic Waves For Stimulation Of Precipitation In Atmosphere A.A. VARDANYAN (U. Armenia, Yerevan)
Thermal Degradation Of Polylactide/Aluminium Diethylphosphinate Composites Involving Nanoparticles
Jale HACALOGLU, Hatice Kaya, Cevdet Kaynak, (METU, Ankara, Turkey)
Formation Of Porous Silicon Sensor For Bio-Chemical Applications
Session 8c
Gagik AYVAZYAN, Arman Vardanyan (U. Armenia, Yerevan)
MATH 8
Room C Chair: J.Podgorski, co-Chairs: C. Ipek, V. Deniz, B.K. Mishra
Precoated Flax-Fiber/Pla Eco-Composites: Mechanical And Morphological Properties Guralp OZKOC, Kayhan Koca, Mehmet Kodal (Kocaeli U.,
Turkey)
Effects Of Octaisobutly-POSS Particles On The Non-Isothermal Crystallization Kinetic Of PLA And Plasticized PLA
Mehmet Kodal, Hümeyra Şirin, Güralp Özkoç (Kocaeli U., Turkey)
Fracture Toughness Evaluation Of Toughened Polyamide 6 With Lotader And Chain Extenders
Sinan YILMAZ, Taner YILMAZ (Kocaeli U., Turkey)
Investigation Into The Effects Of Emulsifier Type On Emulsion Polymerization Of Styrene 2-Ethyl Hexyl Acrylate Based Copolymers
Veli DENİZ, Mehlika Özdemir Alp, Mehmet Özdemir, Ayşe Aytaç (Kocaeli U., Turkey)
Tensile, Thermal And Thermomechanical Properties Of Surface Treated Flax Fiber Reinforced PLA/PC Composites
Ayse AYTAC, N. Gamze Karsli (Kocaeli U., Turkey)
Wednesday 2:00PM-4:00PM
Evaluation of Elastic Properties of Nuclear Graphite using XFEM
Bhanu K. MISHRA, Indra Vir Singh, Yogesh Bisht (Indian Inst.Tech. Roorkee), I.A. Khan, Kamal Sharma (Mumbai, India)
A Combined Model Based On ALE and Fracture Mechanics to Predict Delaminated Composites
Domenico Bruno, Fabrizio Greco, Paolo LONETTI (U. Calabria, Italy)
Session 8d GENERAL 8
Wednesday 2:00PM-4:00PM
small room Chair: Sandra Schloegl, co-chairs: C. Brisan, R. Zitoune
Effect Of Wet Spinning Parameters On Crystalline Structure Of Poly(Vinylidene Fluoride)
Hyun Ju Oh, Gun Jung, Yong Sik Chung, Seong Su KIM (Chonbuk Nat U., Jeonju, S. Korea)
On The Sonic Composites Based On Auxetic Materials Ligia MUNTEANU, Iulian Girip (Inst.Solid Mech, Bucharest, Romania), Ruxandra Ilie
(TU Civil Eng.,Bucharest, Romania)
On The Generation Of Localized Modes In Sonic Composites Veturia CHIROIU, Ioan Rodica (Inst Solid Mech, Bucharest, Romania),
Cornel Brisan (TU Cluj-Napoca, Romania)
Machining Quality of 3d Woven Composites During Drilling With Electro-Deposited Diamond Grains Core
Redouane ZITOUNE (IUT, France)
Structured And Functional Elastomer-Based Composites With Tailored Tribological Characteristics Jakob MANHART, Sandra Schloegl,
Inge Muehlbacher, Andreas Hausberger (PCCL, Leoben, Austria), Raimund Schaller, Armin Holzner (Semperit, Wimpassing, Austria),
Wolfgang Kern (U. Leoben, Austria)
New Epoxy-Based Resins And Functional Inorganic Fillers With Tunable Mechanical Properties For The Preparation Of Composite Materials
With Enhanced Recyclability Simone Viola RADL (PCCL, Leoben, Austria), Thomas Griesser (U. Leoben, Austria), Manuel Kreimer
(PCCL, Leoben Austria), Andreas Oesterreicher, Wolfgang Kern (U. Leoben, Austria), Sandra Schloegl (PCCL, Leoben, Austria)
Epoxy-Based Composites With Modified Elastomeric Damping Layers: New Approaches For The Manufacture Of High Voltage Insulations
With Improved Delamination Resistance Sandra SCHLOEGL (PCCL, Leoben, Austria), Dietmar Lenko (PCCL, Leoben, Austria),
Sabine Bichler,Gerhard Lemesch, Franz Ramsauer , Werner Ladstätter (Andritz Hydro, Weiz, Austria), Wolfgang Kern (U. Leoben, Austria)
Session 9a METAL 2
Wednesday 4:10PM-6:10PM
Room A Chair: Jaroslav Purmensky, co-chairs: I.A. Ibrahim, C.W. Kang
Testing Thermal Fatigue Resistance Of Tool Steels Peter FAJFAR, Milan Tercelj, Goran Kugler, Matevz Fazarinc (U. Ljubljana, Slovenia)
Interfacial Doping: The Way For Obtaining Better Adhesion In Graphene-Metal Composites Alexandra SIKLITSKAYA (Warsaw U.T., Poland,
IOFFE, Russia), Tomasz Wejrzanowski, Krzysztof J. Kurzydłowski (Warsaw U.T., Poland)
Equal Channel Angular Pressing Of Aluminium Alloy Miroslav Greger, Jaroslav PURMENSKY (TU Ostrava, Czech Rep.)
Density Functional Study Of Surface Structure Of Complex Intermetallic Compounds Ag-In-Yb and Ag-In-Gd
Kazuki NOZAWA, Yasushi Ishii (Chuo U., Japan)
Catalytic Properties of H-Mordenite Synthesized Via Hydrothermal Method For Organosulfur Removal
I.A. IBRAHIM , Said M. El-Sheikh (CMRDI, Cairo, Egypt), T. Sharara (Egypt Petroleum Res.Inst.), R.M. Mohamed (CMRDI, Cairo)
Friction Characteristic of Coated Fuel Engine Valve Using Ship Building C.W. Kang, A. Okka, S. Destiani, S.H. Angga, J.Y. Byun, C.J. Lee,
M.K. Kim, M.J.Shin, B.J. Kim,H.S.Kim, D.Y. Park, S.M. Choi, S.M. Kwon, S.H. Chung, S.G. Kwon, J.M.Park, J.S. Kim,
W.S. Choi (Pusan Nat. U., S. Korea)
Microstructure And Erosive Properties of Cobal Arc /Mild Steel Surface Hard Coating Alloy Systems
Effect Of Different Techniques Of Refinement On Structure And Properties Of Al-20% Si Alloy
A.N. Abd El-AZIM, Z.M. El-Baradie (CMRDI, Cairo, Egypt) ppp
D.P. GIRISH (Karnataka, India)
Session 9b NOVEL MAG 2 (organized by THO)
Wednesday 4:10PM-6:10PM
Room B
Chairs: K. Endo, P. Mele
High Static Magnetic Field Facilities For New Materials Development In Japan Kazuo WATANABE, Satoshi Awaji, Hidetoshi Oguro,
Hiroyuki Nojiri, Takahiko Sasaki (Tohoku U., Japan), Tadashi Shimizu, Hiroaki Kumakura (NIMS, Tsukuba, Japan) invited
Experimental Evidence For Dimensional Crossover In Epitaxial Fe-Based Superconducting Films Kazumasa IIDA, J. Haenisch, F. Kurth,
V. Grinenko, L. Schultz, B. Holzapfel (IFW Dresden, Germany), A. Ichinose, I. Tsukada (Yokosuka, Japan), S. Ueda, M. Naito
(Tokyo U. Agricul. & Tech.,Japan) invited
MgB2-based Composites Petre BADICA, G. Aldica, V. Sandu, Lucica Miu, M. Burdusel (Nat. Inst. Mat. Phys., Romania), D. Batalu
(U. Politechnica Bucharest, Romania) invited
Percolation Behaviour in a Binary Paramagnetic and Diamagnetic Composite David S. McLACHLAN (U. Stellenbosch, S. Africa), T. B. Doyle
(U. KwaZulu-Natal, Durban, S. Africa), Godfrey Sauti (Nat. Inst.Aerospace Space, Hampton, VA)
Vortex Dynamics in Striped Superconductors Lucica MIU (Nat.Inst.Mat.Phy., Bucharest, Romania)
Field-Orientation Dependent Magnetization Relaxation In Multilayer Nanoparticle Assemblies Dana MIU (Nat. Inst. Laser, Plasma,
Rad. Phys., Bucharest, Romania), S. I. Jinga, B. S. Vasile(U. Politehnica-Bucharest, Romania), L. Miu (Nat. Inst. Mat. Phys., Bucharest,
Romania)
Session 9c MATH 9
Wednesday 4:10PM-6:10PM Room C Chair: Carlos E. Orozco, co-chairs: E. Whitney, E. Karafaki
The Influence Of The Bonded Imperfectness On Torsional Wave Dispersion In The Finitely Pre-Strained Hollow Bi-Material Compound
Circular Cylinder Made Of Highly-Elastic Material Surkay D. Akbarov, T. Kepceler, E. KARAFAKI (Yildiz T.U., Istanbul)
Active Panels Reinforced With Piezoceramic Fibers Subjected To A Stochastic Acoustic Pressure
Marek PIETRZAKOWSKI (Warsaw U.T., Poland)
Using Python Turtle Graphics For Mesh Representation And Engineering Graphics Carlos E. OROZCO (U. North Carolina-Charlotte)
Mechanics Of Carbon Nanotube Reinforced Nanocomposites Antonio PANTANO, N. Montinaro (U. Palermo, Italy)
Mechanical Behavior And Failure Mechanism Of Composite Hierarchical Pyramidal Truss Sandwich Panels
Jian XIONG, Lina Feng, Fanyi Meng, Li Ma, Linzhi Wu (Harbin Inst.Tech., China)
One Sided Short Term Thermal Loading of CFRP Ellen WHITNEY (Bundeswehr, Erding, Germany)
Global Solution Method For Determining Optimum Lay-Ups Of Vibrating Laminated Composite Plates
Yoshihiro NARITA (Hokkaido U., Sapporo, Japan)
Mechanical Behavior Of Two-Dimensional Carbon/Carbon Composites Reinforced With Carbon Nanotubes
Shinn-Shyong TZENG, Yi-Hsuan Wei, Yu-Hon Lin (Tatung U., Taipei)
Session 9d GENERAL 9
Wednesday 4:10PM-6:10PM
small room
Chair: Tewodros Asefa, co-chairs: L.N. Lopes de la Calle, Luigi di Palma
Evaluation Of Selected Characterization Techniques To Determine Failure Mechanisms Of Epoxy- Based Composite Materials
Manuel KREIMER, Sandra Schlögl, Dietmar Lenko (PCCL, Leoben, Austria), Jördis Rosc (ÖGI, Leoben, Austria), Sabine Bichler,
Gerhard Lemesch, Franz Ramsauer, Werner Ladstätter (Andritz Hydro, Weiz, Austria), Wolfgang Kern (U. Leoben, Austria)
LDPE/EVA/Clay/Flame-Retardant Nanocomposites Using Functionalized Polyethylene as Compatibilizer Saul SANCHEZ-Valdes,
R. Lujan-Acosta, E. Ramírez-Vargas, L.F. Ramos-De Valle (CIQA, Saltillo, Mexico)
Structural Health Monitoring For Aerospace Composite Application
Luigi DiPALMA, F. Romano, A. Sorrentino (Italian Aerospace Cen, CIRA, Capua)
Use of T.Ferroxydans Bacteria For Engraving Copper Surfaces
L.N. Lopez deLaCALLE, A. Rodriguez, E. Diáz-Tena, L. Gurtubay, A. Elías, A. Lamikiz (EHU, Spain)
High Index Nanolayer Effects on Surface Plasmon Resonance Sensors
Ibrahim ABDULHALIM (Ben Gurion U. Negev, Israel), A. Shalabney (Strasbourgh U., France)
Magnesium Matrix Composites For Transportation Industries
Karl Ulrich KAINER, Hajo Dieringa, Norbert Hort (Max-Planck-Strasse, Geesthacht, Germany)
Thermal Conductivity Of Interfaces In Graphene – Metal Composites
Mateusz GRYBCZUK, M. Wasiluk, T. Wejrzanowski, K. J. Kurzydlowski (Warsaw U.T., Poland)
Graphene-Metal Composite For Energy Dissipation From Localized Heat Sources
Tomasz WEJRZANOWSKI, M. Grybczuk, K.J. Kurzydlowski (Warsaw U.T., Poland)
Session 10a BIO 4
Thursday 9:00AM-11:00AM Room A Chairs: Eric Dalton, Han-Yong Jeon, co-chair J. Foster
Preparation Of Pectin And Chitosan Based Composites For Medical Application As A Barrier Material For Prevention Of Adhesion Formation
M.V. KONOVALOVA (Russian Acad Sci, Moscow), S.V. Popov, G.Yu. Popova (RAS, Syktyvkar), D.V. Kurek (RAS, Moscow)
Biodegradable Polymer Nanocomposites from Starch and Cellulose Nanofibrils Extracted from Pine Needles and Sugarcane Bagasse
Anupama S. KAUSHIK, Sheetal Monga, Mandeep Singh (Panjab U., Chandigarh, India)
Biodeuteration for Probing Phase Separation in Biopolymer Composites and Blends John FOSTER (UNSW, Sydney, Australia) invited
Influence Of Sterilisation Environment On The Nanostructure Of Medical Polymers
Eric DALTON, Maurice N. Collins (U. Limmerick), Leah Wallace (Limmerick Inst.Tech., Ireland)
Analysis Of Serviceability And Engineering Performance Of Bio-Degradable Network Materials For Civil Engineering Field Application
Han-Yong JEON (Inha U., Incheon, S. Korea) chair
Characterization Of Lactoferrin- Succinoyl-Chitosan Nanoparticles Developed By Controlled Heat Treatment Tatyana SHCHERBININA,
Anastasia Zubareva, Elena Svirshchevskaya, Valery Varlamov (Russian Acad Sci, Moscow)
Microimmuno-Sensor for Rapid Detection Of Enteroviruses In Biological Samples WaleedNazmy ElMAZNY (Giza, Egypt),
Saad A.M. Moghannem (Al Azhar Univ., Cairo, Egypt), Dalia Elsheakh, Hala Elsadek, Esmat Abdullah (Electronics Res Inst., Giza, Egypt)
Anti-Cancer Effects of Arsenic Sulfides Prepared by Nanomilling Zdenka BUJNAKOVA, Peter Balaz (Slovak Acad Sci, Kosice), Jan Sedlak
(Slovak Acad Sci, Bratislava)
Session 10b NANO 1
Thursday 9:00AM-11:00AM
Room B
Chair: Alan Dalton, co-chairs: M. Modesti, G. Cicala
Templated Assembly of Functional Materials Based on Graphene and Other 2-D Layered Materials Alan DALTON (U. Surrey, UK)
Nanocomposite Fiber Reinforced Mortars Bartolomeo COPPOLA, Luciano Di Maio (U. Salerno, Italy), Luc Courard (U. Liege, Belgium),
Paola Scarfato, Loredana Incarnato (U. Salerno, Italy)
A Novel Colorimetric Probe For Dopamine Based On Gold Nanoparticles-Electrospun Nanofibre Composite Nokuthula NGOMANE
(Rhodes U., S. Africa), Nelson Torto (Botswana I.T., Botswana), Rui Krause (Rhodes U.), Sibulelo Vilakazi (Randburg, S. Africa)
Optimization Of Carbon Nanotubes Dispersion In Polypropylene Based Nanocomposites
Michele MODESTI, Stefano Besco, Denis Hrelja, Martina Roso, Alessandra Lorenzetti (U. Padova, Italy)
Thermal and Surface Properties of HDPE Nanocomposites
Djamila Kada, Ahmed KOUBAA (Univ. Quebec, UQAT, Canada), S. Migneault (U.Sci Boumediene, Algeria), G. Tabak (Algiers, Algeria)
Polymer-Layered Double Hydroxide Nanocomposite For Oxyanions Removal
Bernabe L. RIVAS, Mónica Perez, Nathaly Lampre, Bruno F. Urbano (U. Concepcion, Chile)
Sintering And Biomineralization Behavior Of Bioglass Nanoparticles Decorated Carbon Nanofiber
Xiaolong Jia, Gang Li, Cuihua Zhang, Tianhong Tang, Qing Cai, Xiaoping Yang (Beijing U. Chem.Tech., China)
Tailoring Of Composites Interlaminar Properties By The Use On Nanofilled Veils
Giulia Ognibene, Giulia Cozzo, Antonino Recca (U. Catania, Italy)
Gianluca CICALA , Alberta Latteri, Salvatore Mannino,
Eco-Composites Based On Thermoset And Thermoplastic Bio-Matrices Reinforced With Natural Fibres Alberta LATTERI, Gianluca Cicala, A.D.
LaRosa, Enrico Parrinello (U. Catania, Italy) Gerhard Ziegmann, Ahmed El Saab (Clausthal-Zellerfeld, Germany) ppp
Session 10c
MATH 10
Thursday 9:00AM-11:00AM Room C Chair: Mario M. Attard, co-chairs: R. Khan, D.J. Kim
Localised Buckling Analysis Of Continuous Welded Rail Tracks Using A Sandwich Model
Jianbei Zhu, Mario M. ATTARD, David Kellermann (U. New South Wales, Sydney, Australia)
Localised Buckling Analysis Of Continuous Welded Rail Tracks Using A Sandwich Model
Jianbei Zhu, Mario M. ATTARD, David Kellermann (U. New South Wales, Sydney, Australia)
Nonlocal Mechanics For Nanostructures Tony MURMU (U. West Scotland, UK), Sondipon Adhikari (Swansea U., UK)
Fractographic Investigation On The Effect Of Fatigue Load On The Mode I Delamination Growth In Carbon Epoxy Laminates
Rafiullah KHAN, Saeed Badshah (IIUI, Islamabad, Pakistan)
Computational and Analytical Solutions to Functionally Graded Plates Sandeep M. SHIYEKAR (Rajarambapu Inst.Tech., India)
Effect of Fiber Geometry On Pullout Resistance Of Deformed NiTiNb SMA Fibers Dong-Joo KIM, Hee Ae Kim (Sejong U., Seoul, S. Korea),
Eunsoo Choi (Hongik U., Seoul, S. Korea), Young-Soo CHUNG (Chung-Ang U., Seoul)
Experimental And Numerical Estimation Of The Strain Rate Of A Honeycomb Sandwich Panel With Aluminum Skins And Nomex Core
Andrea GILIOLI, Andrea Manes, Marco Giglio (Politec. Milano, Italy)
Influence of Sea Water Absorption on Long-Term Flexural Properties of Bismaleimide Composite for Marine Use
Yian ZHAO, Zhiying Wang, Leong Keey Seah (Nanyang T.U., Singapore)
Session 10d
GENERAL 10
Thursday 9:00AM-11:00AM small room Chairs: S.K. Varma, M. Himmerlich, co-chair: T.H. Song
Correlation Between Stoichiometry, Surface States, Adsorbates And Electronic Properties Of Polar And Nonpolar InN Surfaces
Marcel HIMMERLICH, Anja Eisenhardt, Stephanie Reiß, Stefan Krischok (TU Ilmenau, Germany)
Effect Of Ni/SiC Particle Size As A Reinforcement In Bronze Matrix Composites Produced By A Combination Of Electroless Coating And Rapid
Current Sintering Techniques Mehmet Uysal, Muhammet KARTAL, Ramazan Karslıoglu, Hatem Akbulut, Ahmet Alp (Sakarya U., Turkey)
Study of Fly Ash Filled Polybutylene Terepthalate Composites For Automotive Applications
Vivek. R. GAVAL, P.A. Mahanawar (Inst.Chem.Tech., Mumbai, India)
Effect Of B On The Oxidation Behavior of Nb-25Cr-15Mo-20Si-XB Alloys For High Temperature Applications In Aerospace Industry
Kathryn S. Thomas, S.K. VARMA (U. Texas at El Paso)
Structure And Multifunctional Properties Of The Composite Systems Containing The Hydrophilic And Hydrophobic Active Components On The Porous Polyethylene
Films Galina K. ELYASHEVICh, E. Yu Rosova, I.S. Kuryndin (Russian Acad Sci, St.Petersburg), V.P. Shibaev (Moscow State U.), V. Bukosek
(U. Ljubljana, Slovenia)
Exploring The Processing Technology To Handle Pure Urethane Resins In The Pultrusion Process Jeff MARTIN (Martin Pultrusion Group, USA)
Rheological Behaviour Of An Epoxy-Diamine Binders Modified By Commercial Polysulfones During The Isothermal Cure
Alexander V. SOLOPCHENKO, S.V. Turbeev, M.Y. Yablokova, A.V. Kepman (Lomonosov Moscow St.U., Russia)
Dielectric Constant Variation By Resin Content Of Glass/CNT-Epoxy Composites Tae-Hoon SONG, Chun-Gon Kim, Won-Ho Choi, Jae-Hwan Shin
(KAIST, Daejeon, S. Korea), Won-Jun Lee (Daejeon, S. Korea)
Session 11a INFRASTR 3
Thursday 11:00AM-1:00PM
Room A
Chair: T.C. Rousakis, co-chairs: T.C. Rousakis, S.A. Grammatikos
Advanced Database Of Concrete Beams Strengthened In Shear With FRPs T.C. Rousakis, Maria E. Saridaki (DUTh, Xanthi, Greece)
Altering The Tension Behavior of GFRP Using Carbon Nanotubes
Eslam Soliman (Assiut U., Egypt), Moneeb Genedy, Mahmoud Reda TAHA (U. New Mexico, Albuquerque)
Simulating The Viscoelastic Effect In Storage On Deployment Efficiency Of Thin Frp Composites
Sherif Aboubakr (U. New Mexico, Albuquerque), Eslam SOLIMAN (Assiut U., Assiut, Egypt), Mahmoud Reda Taha (U. New Mexico)
Effects Of Surface Contact Conditions, Surface Sliding and Dynamic Wave Propagation On Tarred Road Surface and Substrate
Simphiwe NQABISA, G.J. Oliver, M. Kaunda (Cape Peninsula U. T.,Belleville, S. Africa)
Wood-Plastic Composites Structural Performance In Hot Environment Con ADAM (Monash U., Australia)
On The Environmental Degradation Assessment Of Pultruded Fibre Reinforced Polymers
Sotirios A. GRAMMATIKOS, Richard J. Ball, Mark Evernden (U. Bath, UK)
Accelerated Ageing Of Pultruded Fibre Reinforced Polymers: Physical, And Mechanical Characterization Behrouz ZAFARI (U. Warwick, UK)
Confinement With High Deformability Fiber Ropes In Existing Reinforced Concrete Structure
T.C. Rousakis, Maria K. Kardala, Ioannis MOUMTZIS, Michalis Stylianou (D.U.Th., Xanthi, Greece)
Session 11b TEXTILE 2
Thursday 11:00AM-1:00PM
Room B
Chairs: Sandra Bichof, Sneha Samal, M. Fan
The Influence of Pretreatment of Spartium Junceum L. Fibres on Mechanical Properties of PLA Biocomposites Zorana KOVACEVIC,
Edita Vujasinovic, Sandra Bischof (U. Zagreb, Croatia), Mizi Fan (Brunell U., UK)
Conduct Of Multiple Soil and Stain Repulsive Finishes On Cotton Fabric Tear Strengt In Addition To Other Attributes
S. Muhammad NAWAZ, Baber Shahbaz, Zeeshan Nawaz, Allah Bakhsh (Agri. Univ. Faisalabad, Pakistan)
Fabrication Of Nanoyarns For Knitting, Weaving And Braiding George STYLIOS (Heriot-Watt U., UK)
Enhanced Thermal, Mechanical Strength Of Fabric Reinforced Composite At Elevated Temperature
Sneha SAMAL, Iva Petrikova, Bohdana Marvalova (TU Liberec, Czech Rep.)
Effect of Nanotalc Coating on the Surface of Polyester Filament for the Textile Application
Dattatraya P. KAKAD (V.J.T.I, Matunga, Mumbai,India)
Modeling The Non-Linear Deformation Of Flax-Fiberreinforced Polymer Matrix Composites Janis ANDERSONS (U. of Latvia, Riga)
Thermal Property Of Nonwoven Fabrics From Different Testing Methods
Guocheng ZHU, Dana Kremenakova, Jana Grabmullerova, Mazari Adnan Ahmed, Yan Wang
(TU Liberec, Czech Rep.)
Session 11c MATH 11
Thursday 11:00AM-1:00PM Room C Chair: Salih Akpinar, co-chair: Kursat Gultekin
Theoretical Modelling of Life Prediction of Epoxy-carbon Composite Materials
Zhiying WANG, Leong Keey Seah, Yian Zhao (Nanyang T.U., Singapore)
Damage Accumulation and Lifetime Modeling Of Locomotive Tire Under Conditions Of Extreme Uncertainty
Valeriy LEPOV , Albert Grigoriev (IPTPN ,YSN, Russia) invited
Stochastic Structural Modeling Of Crack Dynamics Kyunna LEPOVA, Michael Onopin, Valeriy Lepov (IPTPN, YSN, Russia) invited
Dynamic And Static Mechanical Strength Of Multi-Walled Carbon Nanotubes Polycarbonate Composites
Prashant JINDAL (Panjab U., Chandigarh, India), Navin Kumar (Indian Inst.Tech. Ropar)
Non-Linear Dynamic Instability Analysis Of Sandwich Panels Subjected To Periodic In-Plane Loadings
Tanish DEY, L.S. Ramachandra (Indian Inst Tech-KGP)
Modelling The Low-Velocity Impact Damage And Compression After Impact (CAI) Strength Of Composite Laminates
Wei TAN, Brian G. Falzon (Queen’s U. Belfast, UK), Louis N.S. Chiu (Monash U., Clayton, Australia), Mark Price (Queen’s U. Belfast)
Effect Of Graphene Nanocomposite Adhesives On The Strength Of Adhesively Bonded Single-Lap Joint Volkan Acar, Kursat Gultekin
(Ataturk U., Erzurum, Turkey), Salih Akpinar (Erzurum T.U., Turkey), Gulsah Alar Oner (Ataturk U.), Hamit AKBULUT, Adnan Ozel
(Ataturk U., Erzurum, Turkey)
Effect Of Carbon Nanotube Added Adhesive On The Strength Of Adhesively Bonded Joint Gulsah Alar ONER (Ataturk U., Erzurum Turkey),
Salih AKPINAR (Erzurum T.U., Turkey), Kursat Gultekin, Volkan Acar, Adnan Ozel (Ataturk U., Turkey)
Session 11d GENERAL 11
Thursday 11:00AM-1:00PM
small room Chair: Debes Bhattacharyya, co-chairs: N.K. Kim, D.E. Kim
Applications, Markets and Economical Aspects of Nanotechnology Related Products New Donor–Acceptor Benzotrithiophene-Containing
Conjugated Polymers For Solar Photovoltaic Cells Mikhail M. KRAYUSHKIN, M.L. Keshtov, I.O. Konstantinov, S.A. Kuklin (RAS, Moscow, Russia),
V.S. Kochurov (Lomonosov Moscow St.U., Russia), N.A. Radychev (U. Oldenburg, Germany), A.R. Khokhlov (RAS, Moscow, Russia), Matthias WERNER,
Vili Igel (NMTC, Berlin, Germany)
Processing and Properties of W–ZrC Composites for High- Temperature Applications Jae-Hee Kim, Shinhoo KANG (Seoul Nat.U., S. Korea)
New Donor–Acceptor Benzotrithiophene-Containing Conjugated Polymers For Solar Photovoltaic Cells Mikhail M. KRAYUSHKIN,
M.L. Keshtov, I.O. Konstantinov, S.A. Kuklin (RAS, Moscow, Russia), V.S. Kochurov (Lomonosov Moscow St.U., Russia), N.A. Radychev
(U. Oldenburg, Germany), A.R. Khokhlov (RAS, Moscow, Russia)
Effects of Fibres and Fire Retardant on Flammabilityof Wool Fibre/Polypropylene Composites
Nam Kyeun KIM, Richard J.T. Lin, Debes Bhattacharyya (U. Auckland, New Zealand)
Chemical Reduction and Electronic Properties of Graphene Oxide
Velram Balaji MOHAN, Krishnan Jayaraman, Debes Bhattacharyya (U. Auckland, New Zealand)
Effects of Fibres and Fire Retardant on Flammability of Wool Fibre/Polypropylene Composites
Nam Kyeun Kim, Richard J.T. Lin, Debes BHATTACHARYYA (U. Auckland, New Zealand)
Surface Properties of Composite Coatings Prepared by Electrodynamic Spraying Process
Hae-Jin Kim, Dae-Eun KIM (Yonsei U., Seoul, S. Korea)
Multifunctional Nanocomposites For Active Packaging Applications: Actual Trends And Perspectives
Loredana TAMMARO, Giuliana Gorrasi (U. Salerno, Italy)
work in progress session Thursday 1:00PM-2:00PM Lunch time, Student presentations
Poisson’s Ratios And Stent Geometry Design Daphne Attard, Ruben Gatt, Aaron R. Casha, Luke Mizzi, Roberto Caruana-Gauci, Joseph N. Grima (U. Malta)
Other presentations welcome
ICCE-22 Malta
Session 12a NANO 2
Thursday 2:00PM-4:00PM
Room A
Chair: Jose M. Castro, co-chairs: M. Lo Faro, V. Kovacevic
POSS Based Nanocomposites
Giulia OGNIBENE, Gianluca Cicala, Salvatore Mannino, Ignazio Blanco, Maria Elena Fragala, Paola Bottino,
Antonino Recca (U. Catania, Italy)
Urethane-Based Nanocomposite Materials With Antifungal Properties
Anayansi ESTRADA Monje, David Alfonso Camarena Pozos (CIATEC, Guanajuato, Mexico),
Aligning Carbon Nanotubes Using Bulk Acoustic Waves To Reinforce Polymer Composites Bart RAEYMAEKERS (U. Utah, Salt Lake City)
CNTs Surface Modification To Improve Their Dispersion In High-Viscosity HDPE Matrix: Evaluation Of Mechanical, Electrical and Thermal
Behavior Pascal Van VELTHEM, F. Tao, D. Auhl (U.Cath.Louvain, Belgium), L. Bonnaud, P. Dubois, (U. Mons, Belgium), C. Bailly
(U.Cath.Louvain, Belgium)
Progress On Nanocomposite Materials For SOFCs at CNR-ITAE
Massimiliano LoFARO, Domenico Minutoli, Stefano Trocino, Sabrina C. Zignani, Antonino S. Arico (CNR-ITAE, Messina, Italy) invited
Composites of Different Polymers With WS2 Nanoparticles and Nanotubes Alla ZAK (Holon Inst., Israel), R. Tenne (Weizmann Inst., Israel),
L. Rapoport (Holon Inst.), H. Dodiuk (Shenkar Coll, Israel), E. Zussman (Technion, Israel Inst.Tech.)
The Effects Of Nanofillers On The Properties Of Polylactide (PLA) Composites And Blends Vera KOVACEVIC, Domagoj Vrsaljko,
Sanja Lucic Blagojevic, Mirela Leskovac, Zrinka Buhin, Dejan Macut (U. Zagreb, Croatia)
Investigation Into The Effects Of Emulsifier Type On Emulsion Polymerization Of Styrene 2-Ethyl Hexyl Acrylate Based Copolymers
Mehlika Özdemir ALP (Kocaeli U., Turkey)
Session 12b PHYSICS 3
Thursday 2:00PM-4:00PM Room B
Chair: Kiyoshi Mizuuchi, co-chairs: M. Koehler, M. Sobanska
Processing of Al/Diamond Composites in Solid-Liquid Co-Existent State By SPS and their Thermal Conductivity Kiyoshi MIZUUCHI
(Osaka Municipal Tech Res.Inst., Japan), Kanryu Inoue (U. Washington, Seattle), Yasuyuki Agari, Masami Sugioka, Motohiro Tanaka,
Takashi Takeuchi, Jun-ichi Tani (Osaka M.T.R.I., Japan), Masakazu Kawahara (Fuji Elec., Kawasaki, Japan), Yukio Makino (Kyoto U.),
Mikio Ito (Osaka U.) chair
Synthesis And Properties Of Gold-Oligoaniline-Graphene Composite Valentinas SNITKA, Nora Grinceviciute (Kaunas U.T., Lithuania)
Enhanced Catalyst-Free Nucleation of GaN Nanowires On Amorphous Al 2O3 By Plasma-Assisted
Catalyst-Free Growth And Properties of GaN Nanowires Grown By Plasma-Assisted Molecular Beam Epitaxy
Zbigniew R. ZYTKIEWICZ, Marta Sobanska, Kamil Klosek, Aleksandra Wierzbicka, Jolanta Borysiuk (Polish Acad Sci, Warsaw)
Molecular Beam Epitaxy Marta SOBANSKA, Kamil Klosek, Aleksandra Wierzbicka, Jolanta Borysiuk, Giorgi Tchutchulasvili, Sylwia Gieraltowska,
Zbigniew R. Zytkiewicz (Polish Acad Sci, Warsaw)
Magnetically Responsive Biological Waste Materials For Xenobiotics Removal Ivo SAFARIK, Katerina Horska, Eva Baldikova (Inst.Nanobiotech.,
Budejovice, Czech Rep.), Kristyna Pospiskova (Palacky U., Olomouc, Czech Rep.), Zdenka Maderova, Mirka Safarikova (Int. Nanobiotech.)
Rheological Percolation Of Graphene Nanowire And Poly(Vinylidene) Fluoride W/O Copper Nanoparticles Leela RAKESH, Brooke Berwald
(Central Michigan U., Mt. Pleasant),Nalinda Almeida (Mentor, Ohio) chair
On Propagation Of Plane Waves Along The Symmetry Axis In A Piezoelectromagnetic Crystall Of Class 2 Adriano MONTANARO (U. Padua, Italy)
Electrical And Mechanical Properties Of Graphene-Based Cellulose Composite Films Ibrahim Sen, Yoldas Seki (Dokuz Eylul U., Izmir, Turkey),
Mehmet Sarıkanat (Ege U., Bornova, Turkey), Kutlay SEVER (Katip Celebi U., Izmir, Turkey), Baris Oguz Gurses (Ege U.), Okan Ozdemir,
Ozgun Cem Yılmaz, Levent Cetin (Dokuz Eylul U., Izmir), Omer Mermer (Ege U.)
Session 12c MATH 12
Thursday 2:00PM-4:00PM Room C
Chair: Eva Kormanikova, co-chairs: D.S. Kim, E. Kormanikova
A Study On The Strength Of Nanoadhesively Bonded Joint Subjected To Bending Moment Kursat GULTEKIN, Adnan Ozel (Ataturk U., Erzurum,
Turkey), Salih Akpinar (Erzurum T.U., Turkey), Hamed Ghaffarzadeh Jahanpasand, Gulsah Alar Oner (Ataturk U., Erzurum, Turkey)
Al-CNT Composites: Influence Of Dispersion/Mixture Time In Mechanical Properties
Sonia SIMOES, F. Viana (U. Porto, Portugal), M.A.L. Reis (U.Fed Para, Brazil), Manuel F. Vieira (U. Porto)
Production and Characterization of Ni/Al Laminated Composite Manuel F. VIEIRA, Sonia Simoes, F. Viana (U. Porto, Portugal)
Copper-CNT Nanocomposites Films Filomena Viana, Ruben F. SANTOS, Sonia. Simoes, Manuel F. Vieira (U. Porto, Portugal)
Failure Strength Of Composites With Short Fibres Eva KORMANIKOVA, Kamila Kotrasova (U. Kosice, Slovak Rep.)
Experimental Investigation on the Fracture Toughness of Seawater-Absorbed Epoxy/CNT/Basalt Composites Sang Woo Lee, Kyong Yop RHEE
(Kyung Hee U., Yongin, S. Korea), Hyeon Ju Kim, Dong Ho Jung (Korea Inst.Ocean Sci.Tech., Daejeon, S. Korea)
A Study On The Tensile Properties of Fe3O4/GO/Chitosan Nanocomposites Dae Sung KIM, Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea),
Hyeon Ju Kim, Dong Ho Jung (Korea Inst.Ocean Sci.Tech., Daejeon, S. Korea)
Analysis Of Cylindrical Composite Shell Structure Kamila Kotrasova, Eva Kormanikova (TU Kosice, Slovak Rep.) ppp
Session 12d
GENERAL 12
Thursday 2:00PM-4:00PM
small room
Chair: Bin Zhu, co-chairs: J. Fernandez, A. Okruszek
Development Of Syringe Pump And Study Of Two Phase Flow In Serpentine Capillary Channel Shivakumar RAMACHANDR, Samita Maitra,
Manas Manohar, Srijan Kumar Vaidyanathan (B.M.S. Coll., Bangalore, India)
Multifunctional Nanocoposites For Single Layer Fuel Cell Bin ZHU (KTH, Sweden and Hubei U., Wuhan, China) invited
Manufacturing Of Aluminium Strips By Complex Rolling Process
Wlodzimierz BOCHNIAK, A. Korbel, M. Lagoda, M. Prokopowicz (AGH Univ Sci Tech, Krakow, Poland)
Evaluation of the Mechanical and Thermal Properties of Polyester/Carbonized Maize Stalk Particulate Composites Suleiman B. HASSAN
(U. Lagos, Yaba, Nigeria), J.E. Oghenevweta (Ahmadu Bello U.,Zaria, Nigeria), V.S. Aigbodion (U. Nigeria, Nsukka)
Coconut Shell Particles Reinforced Epoxy Bio-Composites: Morphological And Mechanical Properties Study Victor S. AIGBODION
(U. Nigeria, Nsukka), Suleiman B. Hassan (U. Lagos, Akoka, Nigeria)
Utilization Of Biomass For The Preparation Of Environmentally Friendly Polymer Materials
Wlodzimierz Dondzik, Andrzej OKRUSZEK (Lodz Univ.Tech., Poland)
Nanocomposites Cables For Flame Retardant Use Guenter BEYER (EUREGIO, Belgium)
A Nanoestructured Coating For Improving Hole Making Operations
J. FERNANDEZ-Larronoa, L.N. Lopez de Lacalle, S. Rodriguez, I. Azkona, R. Polvorosa (EHU, Spain)
ICCE-22 Malta
Session 13a METAL 3
Thursday 4:10PM-6:10PM
Room A Chairs: Nabil Bassim, Vaclav Sklenicka, co-chair: Marie Kvapilova
Characteristics Of Tribology For Micro Pattern Using Ultrasonic Hole Machine
M.J. Shin, S.M. Choi, J.S. Kim, J.M. Park, S.G. Kwon, S.W. Chung, S.H. Kwon, Wonsik CHOI (Pusan Nat. U., S. Korea)
Effect Of Stacking Fault Energy On Mechanical Behaviors Of Nanocrystalline Cu And Cu-Al Alloys
Fei WANG, Ping HUANG (Xian Jiaotong U., China)
Properties Of Copper - Alumina Composites Simultaneously Prepared By Internal Oxidation And Mechanical Alloying
Viseslava RAJKOVIC, Dusan Bozic, Jelena Stasic, Jovana Ruzic (U. Belgrade, Serbia)
XPS Analysis Of AISI 304l SS After Electropolishing K. Rokosz (Koszalin U.T., Poland), F. Simon (Leibniz Inst., Dresden, Germany),
Tadeusz HRYNIEWICZ, S. Rzadkiewicz (Koszalin U.T., Poland)
Creep Flow Mechanisms And Fracture Processes In Magnesium Metal Matrix Composites
Vaclav SKLENICKA, Kveta Kucharova, Marie Kvapilova, Milan Svoboda (Acad. Sci. Czech Rep., Brno)
Evolution Of Yield Surface Of Al/Cu Bimetallic Sheet Robert USCINOWICZ (Bialystok U.T., Poland)
Fatigue and Impact of Metallic Alloys Nabil BASSIM (U. Manitoba, Canada)
Effect of SPD On Heat Capacity Of Cold Rolled Gd Ribbons Sergey V. TASKAEV (Chelyabinsk St.U., Russia), K. Skokov (TU Darmstadt,
Germany), V. Khovaylo, V. Buchelnikov, A. Pellenen, D. Karpenkov, M. Ulyanov 1, D. Bataev 1, M. Lyange (Russia) ppp
Modern Problems In Composite Laser Treatment, Numerical Simmulation And Measuring Methods
Milesa SRECKOVIC, Viseslava Rajkovic, A. Grujic, M. Dinulovic, D. Naumovic, B. Kaluderovic, V. Fotev (BG, Serbia) ppp
Session 13b NOVEL MAG 3 (organized by THO)
Thursday 4:10PM-6:10PM
Room B Chairs: F. Canepa, P. Badica, co-chair: T. Endo
Plasmonic Enhancement Of Faraday Effect In Ferrite And Metal Nanoparticles Composite Precipitated
Inside Glass Seisuke NAKASHIMA, K. Mukai (Yokohama U., Japan), K. Sugioka, K. Midorikawa
(RIKEN, Japan), K. Tanaka (Kyoto U., Japan) invited
Magnetic Properties Of Complex Intermetallic Compounds Au-M-R(R=rare-earth)
Ryuji TAMURA, Tadanobu Hiroto (Tokyo U. of Science, Japan)
Spin Coated Bi-Sr-Ca-Cu-O Films Kazuhiro Endo, Yasushi Tateno (Kawasawa I.T., Japan), Shunichi Arisawa (NIMS, Ibaraki, Japan), Tamio Endo
(Mie U., Japan), Hiroshi Kezuka (Tokyo U.T., Japan), Petre Badica (NIMP, Magurele, Romania) invited
Electromagnetic Waves Emitted From Heusler Alloy At Structiral Phase Transition Igor V. BYCHKOV, Dmitry A. Kuzmin (Chelyabinsk
State U., Russia), Aleksander P. Kamantsev, Victor V. Koledov, Dmitry S. Kuchin, Dmitry S. Kalenov, Vladimir G. Shavrov
(RAS, Moscow, Russia)
Absorption Of Electromagnetic Waves By Graphene – Magnetic Semiconductor Multylayered Structure
Dmitry A. KUZMIN, Igor V. Bychkov (Chelyabinsk State U., Russia), Vladimir G. Shavrov (RAS, Moscow, Russia)
Session 13c MATH 13
Thursday 4:10PM-6:10PM
Room C
Chair: Min-Sik Lee, co-chairs: S. Yilmaz, V. Dikovsky
Uncertain Dynamics of FGM Nano-Beams Marcelo Tulio PIOVAN (UTN, Argentina)
The Influence Of Disorientation Of Reinforcement On Deformation And Strength Of Glass-Plastic Tubes Under Uniaxial Tension
Koryun KARAPETYAN, G. Manukyan (MECHINS, Armenia)
The Effect of Process Parameters On Epoxy Flow Behavior And Formability with CR340/CFRP Composites By Different Laminating In Deep
Drawing Process Min-Sik LEE, S.J. Kim, O.D. Lim, C.G. Kang (Pusan Nat. U., S. Korea)
Fracture Toughness Evaluation Of Toughened Polyamide 6 With Lotader And Chain Extenders
Sinan YILMAZ, Taner Yilmaz (Kocaeli U., Turkey)
Evaluation Of The Young’s Modulus Of CDS Nanoparticles From The Data Of Scanning Tunneling Microscopy
Valery DIKOVSKY, E. Peretz, A. Hazarika, R.Z Shneck (Ben-Gurion U. Negev, Israel), D.D. Sarma (Indian Inst Sci. Bangalore),
Y. Manassen (Ben-Gurion U. Negev, Israel)
Utilization of the DOProC Method In Materials Engineering Martin KREJSA, Radim Cajka (VSB, Tech. Univ. Ostrava, Czech Rep.) invited
A New Prediction Strength Model For Fibre Reinforced Thermoplastics Ertugrul S. ERDOGAN (Trakya U., Edirne, Turkey)
Session 13d GENERAL 13
Thursday 4:10PM-6:10PM
small room
Chair: Roland Faller, co-chairs: R. Faller, T. Zhang
Comparative Study of Elastomeric and Biogenic Waste Composite Materials.
Xavier COLOM, J. Cañavate, A. Rahhali, J. Macanàs, F. Carrillo (U. Politec. Cataluna, Spain)
Fire Retardant Polyethylene Inorganic Filler Composites B. LAPCIKOVA, Lubomir Lapcík (Tomas Bata U., Zlin, Czech Rep.)
Polyethylene And Polypropylene Inorganic Filler Nanocomposites: Mechanical Properties Study
Lubomir LAPCIK, B. Lapcíkova (Tomas Bata U., Zlin, Czech Rep.)
Comparative Molecular Modeling Of Polymers For Organic Electronics And Organic Photovoltaics
Yusuke Kawanabe (UC Davis, Calif. and Tokyo U. Sci, Japan), Varuni Dantanarayana, Adam Moule,
Roland FALLER (UC Davis, Calif.)
Membranes For Electrical Actuation Of Shape Memory Composites Yanju LIU, Jinsong Leng (Harbin Inst.Tech., China)
Self-Propagation High Temperature Synthesis Of NiAl–TIC–AL2O3 Composite Tri Widodo Besar Riyadi (Univ. M. Surakarta, Indonesia),
Tao ZHANG, Xiaomeng Zhu (Kingston U., London, UK)
Experimental and Numerical Study of Glass-Fiber 90 deg Composites Inner-Damage by the Fick Thermal Water Absorption/Desorption Model
Tomasz SADOWSKI, Jerzy Podgorski (Lublin U.T., Poland), George A. Papadopoulos, Victor N. Kytopoulos (Nat. T.U. Athens, Greece)
Evolution Of Damage By Acoustic Emission Composite Bolted Assembly (Carbon Fiber/Epoxy) Youcef FACI, Mostefa Baccouche (CSC, Algeria)
Session 14a
BIO 5
Friday 8:00AM-10:00AM
Room A Chair: Khatuna Barbakadze, co-chairs: F. Senatov, M. Rusia
Microstructure and Biocompatibility of Porous Ti-Nb-Zr Composites Fabricated by Spark Plasma Sintering
Dong-Gun Kim, Dong-Soo Kang, Tack Lee, Kee-Do WOO (Chonbuk Nat U., S. Korea)
Thermal Behavior And Kinetic Analysis Of A New Biomimetic Composite: Hydroxyapatite/Pectin And Gelatin Matrix
Paul ALBU, T. Vlase, G. Vlase, N. Doca, V. Turcus si C. Popescu (West Univ. Arad, Romania)
Dielectric, Magnetic, and Electromagnetic Absorption Properties Of Nanocomposite Structures
Harun BAYRAKDAR (Canakkale O.M. Univ., Turkey)
Ultrasound Medical Array Transducers Which Adopt Largely Piezoelectric Materials Like PZT As Active Element
Andrea GRANDONI (Libero, Italy)
Biocompatible Polymer Composites Perspective For Bone And Cartilage Replacement Fedor SENATOV, Sergey Kaloshkin, Aleksey Maksimkin
(Nat.U. Sci.Tech., Moscow, Russia), Natalya Anisimova, Aleksey Kopylov, Mihail Kiselevsky (Russian Cancer Res Cen, Moscow)
Development And Study Of Novel Antimicrobial Inorganic-Organic Hybrid Materials In The Protective Coatings Industry
Khatuna BARBAKADZE, Nodar Lekishvili (Tbilisi State U., Georgia), W. Brostow, J. Wahrmund, Z. Hoyt (U. North Texas, Denton, TX),
David Hui (U. New Orleans)
Obtaining Of Initial Compounds Based On Arsenic-Containing Industrial Wastes For Producing Of Various Bioactive Compounds
Maria RUSIA, I. Laperashvili, Khatuna Barbakadze (Tbilisi State U., Georgia)
New Technological Opportunities Of Isolation Of Pure Commercial Forms Of Bioactive Oxo-Compounds From Arsenic Industrial Waste Of
Caucasus Region Neli SAGHARADZE, M. Rusia, Khatuna Barbakadze, N. Lekishvili (Tbilisi State U., Georgia)
Session 14b
NANO 3
Friday 8:00AM-10:00AM
Room B
Chair: Sung Ho Yoon, co-chairs: Fang E. Xie, M. Kwiatkowska
Optimal Functionalization Process For Surface Modification Of Multi Walled Carbon Nanotubes
Sung Ho YOON, Muhammad Ali Turgunov (Kumoh Nat. Inst.Tech., S. Korea)
Facile Fabrication And Properties Of Three-Dimensional Highly Ordered Structural Polyaniline/ Graphene Bulk Hybrid Materials
Hongyao XU, Shanyi Guang,, Yu Liu (Donghua U., Shanghai,China)
Thermal Properties of Polymer-Based Composites with Nano-Fillers Jinhong YU, Nan Jiang (NIMTE, Ningbo, China) invited
Plasmonic Fluoresecence Enhancement By Nanoengineering Of Ag Nanostructures
Fang E. XIE, Jing S. Pang, Mary P. Ryan, D. Jason Riley, Neil M. Alford (Imperial Coll. London, UK)
Catalyzed Polyolefin Nanocomposites: Synthesis and Structure and Properties Optimization Jin-Yong DONG (ICCAS, Beijing, China)
Polyamide 12/Carbon Nanomaterials Composites Prepared Via In Situ Polymerization Magdalena KWIATKOWSKA, Iwona Pelech,
Anna Jedrzejewska, Inez Kowalczyk, Sandra Paszkiewicz, Zbigniew Roslaniec (West Pomeranian U.T., Szczecin, Poland)
Facile Preparation Of Silicone Rubber/Graphene Oxide Nanocomposite With Enhanced Thermal And Mechanical Properties
Songmin SHANG, Lu Gan, Shou-xiang Jiang (Hong Kong Poly U., China)
Noncovalently Functionalized Carbon Fiber By Grafted Self-Assembled Graphene Oxide And Their Synergistic Effect On Polymeric Shape
Memory Haibao LU, Yongtao Yao, Jinsong Leng (Harbin I.T., China)
Session 14c
MATH 14
Friday 8:00AM-10:00AM
Room C
Chair: Radim Cajka, M. Ganapathi, I. Singh
Monitoring The Behavior Of Structures And Subsequent Statistical Analysis Radim CAJKA, Marin Krejsa (VSB, Tech. Univ. Ostrava, Czech Rep.)
Free Vibration Of Axially Loaded Functionally Graded Sandwich Timoshenko Beams
Thuc P. VO, Adelaja Israel Osofero, Marco Corradi, Fawad Inam (Northumbria U., Newcastle Tyne, UK)
Parametric Dynamic Instability Analyis Of Carbon Nono-Tube Reinforced Sandwich Plates Rafic Mohamed, Kasi Ramajeyathilagam,
Rafic Mohamed (Hindustan U., Chennai, India), M. GANAPATHI (Tech Mahindra, Bangalore, India)
Some Investigation Of Flutter Behavior Of Carbon Nono-Tube Reinforced Sandwich Plates
Kasi RAMAJEYATHILAGAM, Mathi Arasi (Hindustan U., Chennai, India),M. Ganapathi (Tech Mahindra, Bangalore, India)
On Surface Tension Effect In Nanomechanics Emmanuel M. GUTMAN (Ben-Gurion U. Negev, Israel)
Effect Of The Aging On The Dissipative Properties Of Getinacks Subjected To Repeated Static Loading Sona VALESYAN Shant (Nat Acad Sci, Armenia)
Fatigue Crack Growth Simulation of FGMs in the Presence of Flaws Using Extended Isogeometric Analysis
Indra V. SINGH, B.K. Mishra, Gagandeep Bhardwaj (Indian Inst.Tech. Roorkee)
Thermo-Elastic Failure Analysis of Orthotropic Composites by XFEM Akhilendra SINGH, Himanshu Pathak (Indian Inst.Tech. Patna), Indra Vir Singh(Indian Inst.Tech. Roorkee)
Session 14d
GENERAL 14
Friday 8:00AM-10:00AM
small room
Chair: Maurizio Avella, co-chairs: C. Onesippe, Y. Seki
Cellulose Fibre-Reinforced Polypropylene Versus Cellulose Fibre-Reinforced Polylactide: A Comparative Study Of Composite Characteristics
Nina GRAUPNER, Joerg Müssig (U. App. Sci. Bremen, Germany)
Flame Retardants Nanocomposites-Synergy Effect Of Combining Conventional Antypirenes With Nanofillers On The Level Of Flammability Of
Thermoset Resins Ewa KICKO-Walczak, Grażyna Rymarz (IMPIB, Gliwice, Poland)
Fabrication of Phase Change Material Containing Nanofibers via Electrospinning
Jun-Seo Park (Hankyong Nat U., Anseong, S. Korea), Ok-Hee CHUNG (Sunchon Nat U., S. Korea)
Effect Of Organoclay On Fire Performance And Manufacturing Process Of Thermosetting Composites
Quynh Nguyen, Tuan Duc NGO, Phuong Tran, P. Mendis (U. Melbourne, Victoria, Australia)
Sugar Cane Bagasse Fibers/Cement Composites: Influence Of Fiber Content And Thermal Treatment Of Fibers On Flexural Strength
L. Rodier, K. Bilba, Cristel ONESIPPE, M-A. Arsene (U. Antilles Guyane, Guadeloupe, France)
The Influence Of DC Voltage On Behavior Of Nafion-Based Ionic Polymer Metal Composite Actuators Yoldas SEKI, İbrahim Sen (Dokuz Eylul U.,
Izmir, Turkey), Baris Oguz Gurses (Ege U., Izmir), Okan Ozdemir, Ozgun Cem Yılmaz, Levent Cetin (Dokuz Eylul U., Izmir), Mehmet Sarıkanat,
Kutlay Sever, Omer Mermerf (Ege U.)
Electromechanical Behaviour of Ionic Polymer Metal Composite Actuators under Alternating-Current Mehmet SARIKANAT (Ege U., Izmir,
Turkey), Ibrahim Sen, O. Cem Yılmaz, Levent Cetin (Dokuz Eylul U., Izmir, Turkey), , Baris Oguz Gurses (Ege U.), Yoldas Seki (Dokuz Eylul
U.), Kutlay Sever (Katip Celebi U., Izmir), Okan Ozdemir (Dokuz Eylul U.), Omer Mermer (Ege U.)
Recycling Of Non-Metal Fraction Deriving From Printed Circuit Boards (PCB) For Innovative Composite Materials
Maurizio AVELLA,
Giacomo Cesaro, Raffaele Corvino, Emilia Di Pace,Maria Emanuela Errico, Gennaro Gentile (CNR, Pozzuoli, Italy)
Copper/Carbon Nanotube Composite–Preparation, Properties and Use as Pressure Sensor Thomas HUTSCH (IFAM, Dresden, Germany),
William Delinski (U.E. Ponta Grossa, Brasil), Albrecht Leonhardt (Leibniz Inst., Dresden, Germany), Thomas Schubert, Thomas Weißgärber,
Bernd Kieback (IFAM, Dresden)
ICCE-22 Malta
Session 15a INFRASTR 4
Friday 10:00AM-noon
Room A
Chair: Alfred K. Gand, co-chairs: T.C. Lin, L. Wang
The Effect Of Sulfate Attack To The Boron-Coated Lightweight Aggregate Concrete
Ozlem Sall BIDECI, Alper Bideci (Duzce U., Turkey), Sabit Oymael (Trakya U., Edirne, Turkey)
The Freeze-Thaw Cycle Test Of Polymer-Coated Lightweight Aggregate Concrete
Alper BIDECI, Ozlem Sallı Bideci (Duzce U., Turkey), Sabit Oymael (Trakya U., Edirne, Turkey)
Compression Strength Characterisation And Behaviour Of Pultruded Glass Fibre Reinforced Polymer Closed Sections
Alfred K. GAND, Tak-Ming Chan, James Toby Mottram (U. Warwick, Coventry, UK)
Reciprocally Configured And Supported Modules Of Pultruded Glass Fibre Reinforced Polymer Hollow Sections – Experimental Investigation
Alfred Kofi Gand, Harpreet Singh SIDHU (Coventry U., UK), James Toby Mottram, Tak-Ming Chan (U. Warwick, UK)
Flexural Behaviour Of Concrete Beams Reinforced With Basalt Fibre Reinforced Polymer Rebars –Experimental Investigation
Alfred Kofi GAND, David Yeboah, Adegoke Omotayo Olubanwo, Eoin Coakley, Rawand Mawlud, Shuaib Sharif (U. Warwick,UK)
Composite Structures of TiO2/WO3 for Multi-Functional Smart Building Material Applications
Tzu-Ching LIN, Bohr-Ran Huang, Ying-Ming Liu (Nat. Taiwan U., Taipei)
Analysis And Design Of Composite Anti-Collision Bumper System For Bridge
Weiqing Liu, Hai Fang, Lu WANG, Lu Zhu, Xiaojie Peng (Nanjing Tech U., China), David Hui (U. New Orleans)
Session 15b
TEXTILE 3
Friday 10:00AM-noon
Room B Chair: Zoranu Kovacevic, co-chair: M. Fan
Effect of Spartium Junceum L. Fibres Modified by Nanoclay on the Thermal Properties of PLA Biocomposites
Sandra BISCHOF, Zorana Kovacevic (U. Zagreb, Croatia), Mizi Fan (Brunell U., UK)
Studies in Mechanical Properties Of Wheat Straw Fiber Reinforced Polystyrene Composites
Prakash A. MAHANWAR, R.S.N. Sahai (Inst.Chem.Tech., Mumbai, India)
Study On Preparation And Characterization Of Polypropylene Composite Fibers Doped With Modified Jute Particles
Yasemin SEKI, Aysun Aksit, Umit Halis Erdoğan (Dokuz Eylul U., Izmir, Turkey)
Characterization of Polyamide 6 Nanofibrous Membrane by BET Theory
Yan WANG, Jakub Wiener, Guocheng Zhu, Juan Huang (TU Liberec, Czech Rep.)
Mechanical Properties of OKRA (Hibiscus Esculentus) Bast Fibre Reinforced Unsaturated Polyester Composites Haruna MUSA (Bayero U., Kano, Nigeria),
Faizu Abdulkadir Sheshe (Kano, Nigeria), Aminu Sabo Musa, Ado Ali Danbatta, Ahmad Tijjani Sule (Kano State Polytech., Nigeria)
Thermal Property Of Nonwoven Fabrics From Different Testing Methods Guocheng ZHU, Dana Kremenakova, Jana Grabmullerova,
Mazari Adnan Ahmed, Yan Wang (TU Liberec, Czech Rep.)
Session 15c
MATH 15
Friday 10:00AM-noon
Room C Chair: Bernd LAUKE, co-chairs: P.Y.Tabakov, C. Ipek
Effect Of Plastic Void Growth Around Particles With A Size Distribution On Toughness Of Polymer Composites
Bernd LAUKE (Leibniz Inst., Dresden, Germany)
Progressive Failure Analysis Of Composites Under Complex Loads Using Advanced Failure Criteria And Damage Mechanics
Chi-Seung LEE, Jae-Myung Lee (Pusan Nat. U., S. Korea)
The Use Of Popular Evolutionary Algorithms In The Design Of Laminated Composite Structures
Pavel Y. TABAKOV, Sibusiso Moyo‡ (Durban U.T., South Africa)
Structural Transformation in CuAu I nanofibers with L10 Superstructure During Uniaxial Deformation At Different Temperatures
M.D. STAROSTENKOV, Pavel Y. Tabakov, A.B. Yashin, A.A. Soskov (Durban U.T., South Africa)
Computational Modeling of Three-Dimensional Architectured Interpenetrating Phase Composites with Multifunctional Properties
Rashid K. ABU AL-RUB, Diab Abueidda, Ahmed S. Dalaq (Masdar Inst.Sci.Tech., Abu Dhabi, UAE)
The Dispersion Of The Flexural Waves In A Compound Hollow Cylinder Under Imperfect Contact Between Constituents
Surkay D. Akbarov , C. IPEK (Istanbul T.U., Turkey)
Session 15d GENERAL 15
Friday 10:00AM-noon
small room
Chair: Ayman Mosallam, co-chairs: N. Grzesik, O. Al-Qabandi
FRP Parts in Aircraft Development: Design-to-Cost Approaches Konstantin HOREJSI, R. Schledjewski (U. Leoben, Austria)
Analysis Of Thermal Properites Of Aerogel Embedded Composite Structure Mohanapriya VENKATARAMAN, Rajesh Mishra,
Veerakumar Arumugam, Darina Jasikova, Jakub Wiener, Jiri Militky (TU Liberec, Czech Rep.),
Explosive Consolidation of Titanium, Boron and Carbon Containing Powders Mikheil CHIKHRADZE; N. Bochorishvili; Z. Malvenishvili,
N. Chikhradze (Tsulukidz Mining Inst, Tbilisi, Georgia)
Preparation and Application Of Chitosan Nanoparticles Loaded With Cinnamon Essential Oil Jing HU, Xuge Wang, Weijun Deng (Shanghai Inst.Tech., China)
Selected Methods Of Aviation Safety Estimation, Including Composite Aviation Constructions Jan Raichel (Deblin, Poland), Jozef Zurek
(Air Force Inst.Tech., Warsaw, Poland), Norbert GRZESIK (Polish Air Force Acad., Deblin) chair by Jan Raichel
Novel Carbon Nanomaterials for Electrocatalysis and Fuel Cells: Synthesis and Applications Tewodros ASEFA, Vitor Almeida, Anandarup Goswami,
Xiaoxi Huang, Marina Kalpouzos, Katherine Koh, Yuying Meng, Bhaskar Sathe, Rafael Silva, Xiaoxin Zou (State U. New Jersey, Piscataway)
Novel Carbon Nanomaterials for Electrocatalysis and Fuel Cells: Synthesis and Applications Tewodros ASEFA, Vitor Almeida, Anandarup Goswami,
Xiaoxi Huang, Marina Kalpouzos, Katherine Koh, Yuying Meng, Bhaskar Sathe, Rafael Silva, Xiaoxin Zou (State U. New Jersey, Piscataway)
Materials And Mechanics Of High Performance Anodes For Sodium-Ion Batteries Zheng Jia, Teng LI (U. Maryland, Coll. Park)
work in progress session Friday 1:00PM-2:00PM Lunch time, Student presentations
A Hypothesis For Primary Spontaneous Pneumothorax Aaron Casha, Liberato Camilleri, Ruben Gatt (U. Malta), Krzysztof Dudek, Wiktor Wolak (U. Zielonogorski,
Poland), Christopher Giordimaina, Marilyn Gauci, Marie-Therese Camilleri-Podesta, Joseph N Grima
Other presentations welcome
Session 16a NANO
Friday 1:00PM-3:00PM
4
Room A
Chair: Albrecht Leonhardt, co-chairs: A. Grigalovica, K. Kadirgama
Hybrid CNT/Graphene Nanoparticles In Polymer Nanocomposites Based On Poly(Trimethylene Terephthalate) Prepared By In Situ Polymerization
Sandra PASZKIEWICZ, Iwona Pawelec, Anna Szymczyk (West Pomeranian U.T., Poland), Zdenko Spitalsky, Jaroslav Mosnacek
(Polymer Inst, Bratislava, Slovakia), Zbigniew Rosłaniec (West Pomeranian U.T.)
Different Types Of Carbon Nanostructures (Tubes, Fibers) Embedded In Nanocomposites Abdelwahab Hassan, Beate Krause (Leibniz Inst.,
Dresden, Germany), Thomas Hutsch (Fraunhofer Inst, Dresden, Germany), Silke Hampel (Leibniz Inst.), Thomas Schubert,
Thomas Weißgärber (Fraunhofer Inst.,Dresden), Albrecht LEONHARDT , Bernd Buchner (Leibniz Inst., Dresden, Germany)
The Influence of Polyesters and Processing Additives on MWCNT–Polymer Nanocomposite Processability, Microstructure and Properties
Anna BOCZKOWSKA, Paulina Latko (Warsaw U.T., Poland)
Aging Of Nanosized ZnO Modified Polyacetal Blends With Ethylene Octene Copolymer Agnese GRIGALOVICA, Remo Merijs Meri,
Janis Zicans, Janis Grabis, Martins Kalnins (Riga T.U., Latvia), Andrey Aniskevich (U. Latvia, Riga)
Hybrids Of Graphene/Polyaniline Prepared By An Intercalation Polymerization Of Aniline Into Expanded Graphite
Zuowan ZHOU (Southwest Jiaotong U., Chengdu, China) invited
ZnO Nano Fluid as a New Coolant Kumaran KADIRGAMA, Y. Muthusamy, M.M. Rahman (U. Malaysia Pahang)
Carbon Nanotube-Nanodiamond Hierarchical Nanostructures And Their Polyurea Nanocomposites
Valery N. KHABASHESKU (U. Houston, TX) , M.X. Pulikkathara (Rice U., Houston, TX), Rui Lobo (GNCN, FCT-UNL, Caparica,
Portugal)
Thermal, Mechanical And Rheological Properties Of Polyethylene Based Nano-Composites
Sadullah Mir (COMSATS, Abbottabad, Pakistan), Bisma Asghar (Islamabad, Pakistan), Sana Javid, Refakat Ali Khan (COMSATS)
Multiphysics Simulation For Microwave Heating Of Titanium Alloy/Multi-Walled Carbon Nanotubes Powdered Compact
Man-Tik CHOY, Chak-Yin Tang, Chi-Pong Tsui, Wing-Cheung Law (Hong Kong Poly U., China), William Lu (U. Hong Kong, China)
Session 16b INFRASTR 5
Friday 1:00PM-3:00PM
Room B Chairs: T.C. Rousakis, Luigi M. Caligiuri, Nur Yazdani
The Effect Of Dispersion Conditions And The Use Of Surfactants / Plasticizers On The Physical Properties Of CNT Nanomodified Mortars
P. Alafogianni, K. Dassios, P. Dalla, Ilias Tragazikis, D. Exarxos, A. Paipetis, T.E. Matikas, N.-M. Barkoula (U. Ioannina, Greece)
Assessment Of Sulfur-Polymer Composite Quality Based On Nondestructive Testing
Milica VLAHOVIC, Sanja Martinovic, Jelena Majstorovic, Tatjana Volkov Husovic (U. Belgrade, Serbia) invited
Analysis Of Refractory Castables Subjected To Thermal Shock By Non-Destructive Methods Sanja MARTINOVIC, Milica Vlahovic,
Jelena Majstorovic, Tatjana Volkov Husovic (U. Belgrade, Serbia) invited
Non–Linear Pollutant Concentration Waves Propagation In Fluid – Saturated Porous Rocks: Some Examples Of Numerical Solutions In The
Phase Plane Luigi Maxmilian CALIGIURI, Alfonso Nastro, Domenica Giordano (U. Calabria, Italy)
Carbon Nano-Tube and Nano-Fiber Enhancement Of Cement Mortar Nur YAZDANI, Vinoth Mohandam (U. Texas at Arlington)
Using Algae for Generating Energy and Making Nanocellulose in Egyptian Informal Areas Marian NESSIM (Housing & Building Res.Cen.,
Egypt)
Session 16c CHEM 3
Friday 1:00PM-3:00PM
Room C
Chair: J. Sestak, co-Chairs: Bruno Mortaigne, S.O. Kim
Elasticity, Strength And Magnetism Of FePd And FePt Nanocomposites M. Zouhar, Mojmir SOB (Masaryk U., Brno, Czech Rep.) invited
Free Standing Vertically Aligned Carbon Nanotubes Synthesizing Using Floating Catalyst Chemical Vapor Deposition
Mohamed MORSY, Sherif A. Elkhodary, M.H. Khalil, Medhat Ibrahim (Nat. Res.Cen., Dokki, Cairo, Egpt)
Composite Materials And Nano-Structured Sytems
Jaroslav SESTAK (NTC, West Bohemian University, Pilzen), Jiri J. MARES (FZU, Acad Sci Czech Rep., Prague) invited
New Pultrusion Technology For Geopolymer Composites Bronislav FOLLER (Foller s.r.o., Czech Republic)
Thermal And Optical Properties Of Polysilane/Fullerene C60 Nanocomposite
Sergei BRONNIKOV, Sergei Kostromin, Vyacheslav Zuev (Russian Acad Sci., St. Petersburg) chair
Effect Of Annealing Temperature On The Structural And Mechanical Properties Of BaTiO 3 Nanoparticles
A. Donmez, M. Tosun (Istanbul T.U., Turkey), L. Arda, D. Akcan (Bahcesehir U., Istanbul, Turkey)
Chemically Modified Graphitic Carbon Composites Sang Ouk KIM (KAIST, S. Korea)
Session 16d
S. ATAOGLU , Cengiz Ipek,
GENERAL 16
Friday 1:00PM-3:00PM
small room
Chair: Pasquale Cavaliere, co-chairs: A. Treviso, R. Maev
Dynamic Mechanical Thermal Analysis Of Polypropylene Treated Flax Biocomposites Shereen M.-S. ABDEL-HAMID (Higher Tech Inst,
Tenth of Ramdan City, Egypt), M. Bassyouni (King Abdulaziz U., Rabigh, S. Arabia)
Material Recycling of Low Density Polyethylene (LDPE) and Photovoltaic (PV): Thermal and Mechanical Property Assessment
Isam JANAJREH (Masdar Inst.Sci.Tech., UAE)
Influence Of Microstructural Morphology On Mass Transport In Nanopolycrystalline Composite Media Using Meso Scale Model
Sathiskumar JOTHI, T.N. Croft. S.G.R. Brown, E. de Souza Neto (U. Swansea, UK)
Cold Spray Nanocomposites Coatings: Processing Parameters Affecting Mechanical Behavior Pasquale CAVALIERE, A. Perrone, A. Silvello (U. Salento, Italy)
Printable Nanoring Arrays Consisting of Co/Pt Multilayers B.K. Cho (GIST, Gwangju, S. Korea)
CAE-Based Assessment Of Manufacturing Process Impact on NVH Performance Of Composite Structures
Alessandra TREVISO (LMS Int., and U. Calabria), Bert Van Genechten (LMS Int.. Leuven, Belgium), Domenico Mundo (U. Calabria, Italy)
A Comparative Analysis of the Evaluation of Composite Structures Using Three Advanced Non- Destructive Methods: High-Resolution Ultrasonic
Microscopy, Air Coupling Acoustics and Principle Component Thermography Imaging Roman MAEV (U. Windsor, Canada) invited
Nanocomposites Material for Photovoltaics Mohamed NORANI Muti (U.T. Petronas, Malaysia)
Session 17a
BIO 6
Friday 3:00PM-5:00PM Room A Chair: Gary Chinga-Carrasco, co-chairs: S. Cavalu, K. Qiao
Thermal Analysis of Frozen and Banked Human Bones
Francesco LAMONACA (U. Calabria, Italy), M. Vasile (Ovidius U. Constanta, Romania) , Alfonso Nastro (U. Calabria)
Wood Pulp Fibres And Nanocellulose – Characterization And Application In Biocomposite Materials
Gary CHINGA-Carrasco, Malin Brodin, Per Olav Johnsen, Trond Karlsen (PFI, Trondheim, Norway)
Compositional Effect On The Bioactivity Of Phosphosilicate Glasses With Yttrium
Viorica SIMON (Babes-Bolyai U., Cluj-Napoca, Romania), Simona Cavalu (U. Oradea, Romania)
Bioceramics for Load Bearing Applications: Organic/ Inorganic Treatments to Enhance their Bioactivity and Biocompatibility
Simona CAVALU (U. Oradea, Romania), Viorica Simon (Babes-Bolyai U., Cluj-Napoca, Romania)
Properties of Carboxymethylated Nano-Cellulose Microfiber Reinforced Sodium Alginate Composite For Biomedical Application
Qinghua Lin, Yudong ZHENG, Xiangning Shi, Yajie Xie, Haining Luo (U. Sci Tech Beijing, China)
Structure Control And Mechanical Property Characterization Of Poly(Vinyl Alcohol)/Bacterial Cellulose Composite Hydrogels
Kun QIAO, Yudong Zheng，Jue Tan，Jiaqi Li，Duo Xu (U.Sci.Tech. Beijing, China)
PP and PLA Biocomposites Reinforced With Cellulosic Fibres Agnieszka MELJON, Piotr Franciszczak, Andrzej K. Bledzki (West Pomeranian U.T. Szczecin, Poland)
Porous Graphene Oxide Biomaterials With Potential Application In Bone Regeneration
Mariana IONITA, Madalina Andreea PANDELE, Horia Iovu (U. Polite. Bucharest, Romania)
Session 17b
INFRASTR 6
Friday 3:00PM-5:00PM
Room B
Chairs: Pilar delaRosa GARCIA, J. Hola, co-chair: V. Colotti
Evaluation Of Interlayer Bond Between Polymer Composite And Concrete Substrate By X-Ray Microtomography Slawomir Czarnecki,
Jerzy Hoła, Magdalena Rajczakowska, Lukasz SADOWSKI (Wroclaw U.T., Poland)
Non-Destructive Neural Prediction Of The Pull-Off Adhesion Between Concrete Layers-Methodology
Lukasz Sadowski, Jerzy HOLA (Wroclaw U.T., Poland)
Wood Plastic Composite from HDPE and Rice Straw Using a New Coupling Agent Mohamed H. El Nemr (Alexandria, Egypt);
Yehia M.S. El-SHAZLY; Achraf A. Mobarak, Mohamed H. Zaki (Alexandria U., Egypt)
Study of The Increase in Bending Stiffness Of Timber Beams Reinforced With Composite Materials
Pilar delaRosa GARCIA, M.Nieves González García, Alfonso Cobo Escamilla (U.Politech. Madrid, Spain) chair
Natural Calcareous Stones Strengthened By Fiber Reinforced Plastic (FRP), Analysis Of The Bond Interface After Exposure To Severe Conditions
M. SCIOLTI, M. Frigione, Maria A. Aiello (U. Salento, Leece, Italy)
Diagonal Shear Behaviour Of Masonry Walls Strengthened by Fiber Reinforced Mortar (FRM) Composites Francesco MICELLI,
Margherita Stefania Sciolti , Allen Dudine, Marianovella Leone, Maria A. Aiello (U. Salento, Lecce, Italy)
Jute Reinforced Polymer Composites for Low Cost, Light-weight and Recyclable Housing Material J.M.M. Islam, Mubarak A. Khan (Dhaka, Bangladesh)
Theoretical Study On The Failure Process In Rc Beams Shear-Strengthened With Complete FRP Wraps Vincenzo COLOTTI (U. Calabria, Italy)
Session 17c
NANO 5
Friday 3:00PM-5:00PM Room C Chair: David Gawne, co-chairs: D. Gawne, K. El-Hami
Wear Performance Of Polymer Nanoclay Composite Coatings Yuqing BAO, David Gawne, Jiming Gao (London South Bank U., UK)
Structure And Properties Of Phosphate Glass - Polymer Nanocomposites Luciana Serio, David GAWNE, Yuqing Bao (London South Bank U., UK)
Peptide-Conjugated Non-Cytotoxic Mn-Doped ZnSe/ZnS Quantum Dots for Detection of Matrix Metalloproteiiase Activity Marek OSINSKI, J.B. Plumley,
G. Alas, G.A. Smolyakov, W. Ornatowski, E.D. Milligan (U.New Mexico) invited
Anomalous Temperature Dependence Of Quantum Dot Photoluminescence Karel KRAL (Acad Sci Czech Rep., Prague)
Processing And Characterization Of Nanostructured Materials Embedded In Polymeric Matrix Alexandra C. GRIGORIE (Politec. U. Timisoara, Romania)
Nanocomposite TiN/BNC Films: Experimental And Theoretical Studies Volodymyr I. IVASHCHENKO, P.L. Skrynskyy, L.A. Ivashchenko,
O.O. Butenko (Inst.Prob.Mat.Sci., Kiev, Ukraine), Leonid Gorb (Jackson State U., Mississippi), Frances Hill (ERDC, Vicksburg, MS),
Jerzy Leszczynski (Jackson State U.)
Investigate The Compressive Strength Of Porous Geopolymer Composites With Different Hydroxyapatite Filling Ratios
Ling Chen, Man Tik CHOY, Chak Yin Tang, Wing Cheung Law, Chi Pong Tsui (Hong Kong Poly U., China), Fei Peng Du, Sui Sui Xie
(Wuhan Inst Tech, China), KelvinW.K. Yeung (U. Hong Kong), Da Zhu Chen (Shenzhen U., China)
Modified Injection Moulding Machine For The Production Of Uniformly Disperse Carbon Nanotube Nanocomposite Sylvester GADIMOH, I.M. Bugaje
(Kaduna State, Nigeria), H.D. Ibrahim (Abuja, Nigeria), E.G. Kolawole, P.O. Nkeonye (Kaduna State Nigeria), A. Mustapha (Abuja, Nigeria)
Session 17d GENERAL 17
Friday 3:00PM-5:00PM small room
Chair: David F. Grech, co-chairs: D.F. Grech, N. Nwogu
Microstructural Aspects Of Diffusionless Phase Transformation In Shape Memory Alloys Osman ADIGUZEL (Firat U., Elazig, Turkey)
Short Carbon Fiber Reinforced UHMWPE-Matrix Composites Dilyus CHUKOV, A.A. Stepashkin, K.V. Kuskov (MISIS, Moscow, Russia)
Diamond–Metal Matrix Composites Using Electroless NiWP Coated Diamond Particles
David F. GRECH, Stephen Abela (U. Malta), Michael Attard, Darren Cordina (IMA, Zejtun, Malta)
Nano Structured Materials For Carbon Capture Applications for Climate Change Mitigation
Ngozi NWOGU, Mohammed Kajama, Kennedy Dedekuma, Edward Gobina (Robert Gordon U., Aberdeen, UK) v
The Influence Of Fiber Density On Fiber Mechanical Extraction and Creep Resistance Of Bamboo Fiber and Coco Coir
Benjamin C. TOBIAS, Yong Gyun Kim, Cristian Paalan (Silliman U., Philippines)
Preparation and Study of Some Physical and Mechanical Properties of Pineapple Fibre/ High Density Polyethylene Composites
Abdullahi DANLADI, Jamila Shu’aib (Ahbadu Bello U., Zaria, Nigeria)
Characterization of Multiwall Carbon Nanotubes- Jute Fiber Hybrid Reinforced Vinylester Composites Using Vacuum Resin Infusion Process
Mohamed BASSYOUNI, M.H. Abdel-Aziz (King Abdulaziz U., Rabigh, S. Arabia), S.M.S. Abdel-Hamid (Higher Tech Inst, Egypt)
Friday night banquet, Golden Tulip Vivaldi hotel