已發表期刊論文 378 篇，被引用次數
7500，
1
2
T.G. Nieh and J. Wadsworth, ‘Hall–Petch Relation in Nanocrystalline Solids,’ Scripta
Metall. Mater., 25, 955–958 (1991).
C. A. Schuh and T. G. Nieh, ‘A nanoindentation study of serrated flow in bulk metallic glasses,’ Acta Mater. 51(1), 87-99 (2003).
IF: 2.949
2 / 66
IF: 3.760
1 / 66
3
S.X. Song, H. Bei, J. Wadsworth, and T.G. Nieh, ‘Flow serration in a Zr-based bulk metallic glass in compression at low strain rates,’ Intermetallics. 16, 813–818, 2008.
IF: 2.231
3 / 66
4 S.X. Song, X.-L. Wang, and T.G. Nieh, ‘Capturing shear band propagation in a
Zr-based metallic glass using a high speed camera’ Scripta Mater, 62(11) 847-850,
2010.
5
C. J. Lee, Y. H. Lai, J. C. Huang, X. H. Du, L. Wang, and T.G. Nieh,‘ Strength variation and cast defect distribution in metallic glasses,’ Scripta Mater, 63, 105-108,
2010.
IF: 2.949
2 / 66
IF: 2.949
2 / 66
1. T.G. Nieh and W.D. Nix, ‘The Intergranular Cavity Growth in Ag + 0.1% MgO at High
Temperatures,’ Acta Metall.
, 27, 1079–1085 (1979).
2.
3.
T.G. Nieh and W.D. Nix, ‘The Formation of Water Vapor Bubbles in Copper and Their Effect on the Intergranular Creep Fracture,’ Acta Metall.
, 28, 557–566 (1980).
T.G. Nieh and W.D. Nix, ‘A Comparison of the Dimple Spacing on the Intergranular Creep
4.
5.
Fracture Surface of Copper with the Slip Band Spacing,’ Scripta Metall.
, 14, 365–368 (1980).
T.G. Nieh and W.D. Nix, ‘Embrittlement of Copper Due to Segregation of Oxygen to the Grain
Boundary,’ Metall. Trans.
, 12A, 893–901 (1981).
W. Wheeler, R.F. Karlak, T.G. Nieh, and A.E. Vidoz, ‘Beryllium Optical Mirror by Vapor
Deposition,’ in Contemporary Methods of Optical Mirror Fabrication, Proc. SPIE 306 , pp.
71–78, edited by C.L. Stonecypher, Society of Photo–Electronic Industrial Engineering,
6.
7.
Bellingham, WA, (1981).
T.G. Nieh, R.F. Karlak, and A.E. Vidoz, ‘Carbide Coating on Graphite Fibers by Liquid Metal
Transfer Agent Methods,’ J. Am. Ceram. Soc.
, 65 (5), 227–230 (1982).
T.G. Nieh, R.F. Karlak, and A.E. Vidoz, ‘The Effect of the Atomic Incident Angle upon the
Microstructure of Thick Beryllium Deposits Produced by Physical Vapor Deposition,’ J. Vac.
8.
9.
Sci. Technol.
, 19 (11), 980–985 (1982).
T.G. Nieh and S.H. Goods, ‘Mechanisms of Intergranular Cavity Nucleation and Growth
During Creep,’
Scripta Metall.
, 17, 23–30 (1983).
T.G. Nieh and R.F. Karlak, ‘Hot–Rolled SiC–Reinforced Aluminum Composites,’ J. Mater. Sci.
Lett.
, 2, 119–122 (1983).
10. T.G. Nieh, ‘Creep Rupture of a SiC Reinforced Aluminum Composite,’ Metall. Trans.
, 15A,
139–146 (1984).
11. T.G. Nieh and R.F. Karlak, ‘Aging Characteristics of 6061Al–B4C Composite,’ Scripta Metall.
,
18, 25–28 (1984).
12. T.G. Nieh and D.J. Chellman, ‘Modulus Measurements in Discontinuous Reinforced
Aluminum Composites,’
Scripta Metall.
, 18, 925–928 (1984).
13. T.G. Nieh, C.A. Henshall, and J. Wadsworth, ‘Superplasticity at High Strain Rate in SiC–2124
Al Composite,’ Scripta Metall.
, 18, 1405–1408 (1984).
14. T.G. Nieh, ‘Grain Boundary Segregation of Ni in W,’ Scripta Metall.
, 18, 1279–1282 (1984).
15. T.G. Nieh, J. Wadsworth, and D.J. Chellman, ‘In Situ Auger Fractographic Study of a SiC
Reinforced Al Alloy,’ Scripta Metall.
, 19, 181–184 (1985).
16. C.A. Henshall, T.G. Nieh, and J. Wadsworth, ‘Superplastic Aluminum Alloys,’ in Advanced
Technology in Materials and Processes, 30th National SAMPE Symposium , Vol. 30, pp. 994–1004, Society for Advancement of Material and Process Engineering, Covina,
California, (1985).
17. T.G. Nieh, R.A. Rainen, and D.J. Chellman, ‘Microstructure and Fracture in SiC Whisker
Reinforced 2124 Al Composite,’ Proc. 5th Inter. Conf. on Composite Materials , pp. 825–842,
Highly cited paper
Highly cited paper
Highly cited paper
Highly cited paper
Highly cited paper

edited by W.C. Harrigan, J. Strife, and A.K. Dhingra, The Metallurgical Society, Inc.,
Warrendale, PA, (1985).
18. J. Wadsworth, C.A. Henshall, and T.G. Nieh, ‘Superplastic Aluminum–Lithium Alloys,’ in
Aluminum–Lithium Alloys III , pp. 199–212, edited by C. Baker, P.J. Gregson, S.J. Harris, and
C.J. Peel, The Institute of Metals, London, (1986).
19.
T.G. Nieh and J. Wadsworth, ‘Superplasticity in Aerospace Aluminum Alloys,’ in
Superplasticity in Aerospace–Aluminum , pp. 194–214, R. Pearce and L. Kelly, eds., Ashford
Press, Curdridge, Southampton, Hampshire, (1985).
20. T.G. Nieh, P.S. Gilman, and J. Wadsworth, ‘Extended Ductility at High Strain Rates in a
Mechanically Alloyed Aluminum Alloy,’ Scripta Metall.
, 19 1375–1378 (1985).
21. J. Wadsworth, C.A. Henshall, T.G. Nieh, A.R. Pelton, and P.S. Gilman, ‘Extended Ductility in
SiC Reinforced Aluminum Alloys and Mechanically Alloyed Aluminum Alloys,’ in Aluminum
Powder Metallurgy , pp. 137–154, edited by G.J. Hildeman and M.J. Koczak, AIME,
Warrendale, PA, (1985).
22. T.G. Nieh and W.D. Nix, ‘Unloading Yield Effects in Aluminum Alloys,’ Metall. Trans.
, 17A,
121–126 (1986).
23. T.G. Nieh, J. Wadsworth, and A. Joshi, ‘Interfacial Reaction between Carbon and Beryllium,’
Scripta Metall.
, 20, 87–90 (1986).
24. T.G. Nieh, ‘Solid–State Diffusion Bonding of Tungsten–25 Rhenium Alloy,’ J. Mater. Sci.
, 21,
2327–2334 (1986).
25. T.G. Nieh, ‘Diffusion Bonding of Certain Refractory Metals,’ in 31st Inter. SAMPE Symp ., pp. 1595–1603, Society for Advancement of Material and Process Engineering, Covina,
California, (1986).
26. J. Wadsworth, C.A. Henshall, T.G. Nieh, M.C. Pandey, A.K. Mukherjee, and A.R. Pelton, ‘The
Effects of Superplastic Flow on the Microstructure of Al–Li Based Alloys,’ in 31st Inter.
SAMPE Symp ., pp. 589–599, Society for Advancement of Material and Process Engineering,
Covina, California, (1986).
27. J. Wadsworth, T.G. Nieh, and J.J. Stephens, ‘Dilute Mo–Re Alloys – a Critical Evaluation of
Their Comparative Mechanical Properties,’ Scripta Metall.
, 20, 637–642 (1986).
28.
J. Wadsworth, T.G. Nieh, and A.K. Mukherjee, ‘Superplastic Aluminum Alloys – A Review,’ in Aluminum Alloys – Their Physical and Mechanical Properties, Vol. II , pp. 1239–1253, edited by E.A. Starke Jr. and T.H. Sanders Jr., University of Virginia, Charlottesville, Virginia,
(1986).
29.
T.G. Nieh, J. Wadsworth, and W.H. Kao, ‘Fracture and Strengthening Mechanisms in
Discontinuous SiC Reinforced Aluminum Composites,’ in Advanced Composite Materials and
Structures , pp. 437–452, edited by G.C. Sih and S.E. Hsu, VNU Science Press, Utrecht, The
Netherlands, (1987).
30. T.G. Nieh and J. Wadsworth, ‘Mechanical Properties of a Rapidly Solidified Al–Be–Li Alloy at
Elevated Temperatures,’ Scripta Metall.
, 21, 355–358 (1987).
31. T.G. Nieh, C.A. Henshall, and J. Wadsworth, ‘High Temperature Properties of Rapidly
Solidified Al–Be Alloys,’ J. Mater. Sci.
, 22, 4411–4414 (1987).
32. T.G. Nieh and J. Wadsworth, ‘Thick Magnesium Films Produced by Deposition Techniques,’
Thin Solid Films , 152(3), 525–534 (1987).
33. T.G. Nieh, W.C. Oliver, A.R. Pelton, and J. Wadsworth, ‘Characterization of the Aging
Response of Melt–spun Al–Be–Li Alloy Ribbons,’ Metall. Trans.
, 19A, 1173–1178 (1988).
34.
W.C. Oliver, J. Wadsworth, and T.G. Nieh, ‘Characterization of Rapidly Solidified Al–Be–Li and Al–Be Ribbons,’ Scripta Metall.
, 21, 1429–1433 (1987).
35. T.G. Nieh and J. Wadsworth, ‘Magnesium Alloy AZ31 Foil Prepared by Sputter Deposition at
200°C,’ J. Mater. Sci. Lett.
, 6, 1150–1152 (1987).
36.
J. Wadsworth, T.G. Nieh, C.A. Henshall, W.C. Coons, and J.J. Stephens, ‘The Role of Oxygen on the Mechanical Behavior of Molybdenum Alloys,’ in Space Nuclear Power Systems 1987 , pp. 313–318, edited by M.S. El–Genk and M.D. Hoover, Orbit Book Co., Malabar, Florida,
(1988).
37. J. Glazer, T.G. Nieh, and J.W. Morris, Jr., ‘Tensile Behavior of Superplastic Al–Cu–Li–Zr
Alloy 2090 at Cryogenic Temperatures,’ in Advances in Cryogenic Engineering Materials
Vol. 34 , pp. 291–298, edited by A.F. Clark and R.P. Reed, eds. Plenum Press, New York,
(1988).
38.
T.G. Nieh, K. Xia, and T.G. Langdon, ‘Mechanical Properties of Discontinuous SiC Reinforced
Aluminum Composites at Elevated Temperatures,’ J. Eng. Mater. Tech.
, 110, 77–82 (1988).
39. T.R. Bieler, T.G. Nieh, J. Wadsworth, and A.K. Mukherjee, ‘Superplastic–like Behavior at

a. b.
High Strain Rates in a Mechanically Alloyed Aluminum,’ Scripta Metall.
, 22, 81–86 (1988).
Also printed on:
Proceedings IX Inter–American Conference on Materials Technology , p. 213, Editorial
Universitaria, Universidad de Chile, Santiago–Chile, (1987).
"Enhanced Plasticity in Mechanical Alloyed Aluminum,’ Mater. Res. Soc. Symp. Proc. Vol.120
, c. pp. 137–142, (1988).
"Superplastic Behavior of Mechanically Alloyed Aluminum Al–90211", ICSMA 8 , Finland,
August 22–26, (1988).
40. J. Wadsworth, T.G. Nieh, and J.J. Stephens, ‘Recent Advances in Aerospace Refractory Metal
Alloys,’ Inter. Mater. Rev.
, 33(3), 131–151 (1988).
41. T.G. Nieh, J.J. Stephens, J. Wadsworth, and C.T. Liu, ‘Chemical Compatibility between Silicon
Carbide and a Nickel Aluminide,’ in Interface in Polymer, Ceramic, and Metal Matrix
Composites , pp. 215–224, edited by H. Ishida, Elsevier Science Publishing Co., NY. (1988)
42. K. Xia, T.G. Nieh, J. Wadsworth, and T.G. Langdon, ‘The Creep Behavior of SiC–Al
Composites,’ in Advancing with Composites Vol. I , pp. 233–240, I. Crivelli Visconti, ed.,
Cooperative Universitaria Editrice Napoletana, Napoli, Italy (1988).
43. T.G. Nieh, C.M. McNally, J. Wadsworth, D.L. Yaney, and P.S. Gilman, ‘Mechanical
Properties in a SiC Reinforced Aluminum Composite Prepared by Mechanical Alloying,’ in
Dispersion Strengthened Aluminum Alloys , pp. 681–92, edited by Y–W Kim and W.M. Griffith,
The Metallurgical Society, Warrendale, PA (1988).
44. A.H. Chokshi, T.R. Bieler, T.G. Nieh, J. Wadsworth, and A.K. Mukherjee "Superplasticity in
Silicon Carbide Reinforced Aluminum and Mechanically Alloyed Aluminum Aerospace
Alloys,’ in Superplasticity in Aerospace , pp. 229–245, edited by H.C Heikkenen and T.R.
McNelly, The Metallurgical Society, Warrendale, PA (1988).
45. J. Glazer, T.G. Nieh, J. Wadsworth, and J.W. Morris, Jr., ‘Mechanical Properties of
Superplastic–Formed Al–Cu–Li–Zr Alloy 2090,’ in MRS Intl. Meeting on Advanced Materials
Vol 7 (IMAM–7, Superplasticity) , pp. 51–58, edited by M. Doyama, S. Somiya, and R.P.H.
Chang, Materials Research Soc., Pittsburgh, PA, (1989).
46. T.G. Nieh and J. Wadsworth, ‘Review – High Strain Rate Superplasticity in Aerospace
Aluminum Alloys,’ in
MRS Intl. Meeting on Advanced Materials Vol 7 (IMAM–7,
Superplasticity) , pp. 43–50, edited by M. Doyama, S. Somiya, and R.P.H. Chang, Materials
Research Soc., Pittsburgh, PA, (1989).
47. T.G. Nieh, J. Wadsworth, and O.D. Sherby, ‘Fine–Grained Yttria–Stabilized Tetragonal
Zirconia – an Example of a Superplastic Ceramics,’ in MRS Intl. Meeting on Advanced
Materials Vol 7 (IMAM–7, Superplasticity) , pp. 251–258, edited by M. Doyama, S. Somiya, and R.P.H. Chang, Materials Research Soc., Pittsburgh, PA, (1989).
48. J. Wadsworth, T.G. Nieh, and O.D. Sherby, ‘Some Recent Advances in the Development of
Fine–grained Superplastic Aluminum Alloys, Ceramics, and Laminated Composites,’ in
Superplastic and Superplastic Forming , edited by C.H. Hamilton and N.E. Paton, pp. 57–61,
The Minerals, Metals & Materials Soc., Warrendale, PA., (1988)
49. T.R. Bieler, T.G. Nieh, J. Wadsworth, and A.K. Mukherjee, ‘High Rate Superplastic Behavior of Mechanically Alloyed Al IN 90211,’ in Superplasticity and Superplastic Forming , edited by
C.H. Hamilton and N.E. Paton, pp. 161–166, The Minerals, Metals & Materials Soc.,
Warrendale, PA., (1988). (It was awarded the best paper of the conference.)
50. T.G. Nieh, C.M. McNally, and J. Wadsworth, ‘Superplastic Behavior of a Yttria–Stabilized
Tetragonal Zirconia Polycrystal,’
Scripta Metall.
, 22, 1297–1300 (1988).
51. T.G. Nieh, J. Wadsworth, and C.T. Liu, ‘Hardening Behavior of Nickel Beryllides,’ Scripta
Metall.
, 22, 1409–1413 (1988).
52. C.M. McNally, T.G. Nieh, and W.H. Kao, ‘The Effect of Potassium Doping on the Mechanical
Strength of Molybdenum,’
Scripta Metall.
, 22, 1847–1850 (1988).
53. A.H. Chokshi, T.G. Nieh, J. Wadsworth, and A.K. Mukherjee, ‘The Superplastic–like
Characteristics of a Silicon Carbide Whisker Reinforced Aluminum Composite,’ in Strength of
Metals and Alloys (ICSMA 8), Vol. I , pp. 301–306, edited by P.O. Kettunen, T.K. Lepisto and
M.E. Lehtonen, Pergamon Press, New York, (1988).
54. J.S. Lee and T.G. Nieh, ‘Oxidation of Nickel Beryllides,’ in Oxidation of Intermetallic
Compounds , pp. 271–278, edited by T. Grobstein and J. Doychak, The Minerals, Metals &
Materials Society, Warrendale, PA, (1988).
55.
T.G. Nieh and J. Wadsworth, ‘Dynamic Grain Growth in Yttria–Stabilized Tetragonal Zirconia during Superplastic Deformation,’ J. Am. Ceram. Soc.
, 72[8], 1469–1472 (1989).
56. T.G. Nieh, J. Wadsworth, and C.T. Liu, ‘Influence of Stoichiometry on the Mechanical

Properties of Nickel Beryllides,’ in MRS Symp. Proc. Vol. 133, High Temperature Ordered
Intermetallic Alloys III, pp. 743–748, edited by C.T. Liu, A.I. Taub, N.S. Stoloff, and C.C.
Koch, Materials Research Society, Pittsburgh, PA (1989).
57. T.G. Nieh, C.M. McNally, and J. Wadsworth, ‘Superplastic Behavior of a 20% Al2O3/YTZ
Ceramic Composite,’ Scripta Metall., 23, 457–460 (1989).
58.
T.G. Nieh and J. Wadsworth, ‘Effect Oxygen on the Strength of NiBe,’
Scripta Metall.
, 23,
871–874 (1989).
59. T.G. Nieh and W.C. Oliver, ‘Superplasticity of a Nickel Silicide,’ Scripta Metall.
, 23, 851–854
(1989).
60.
D.J. Yaney, T.G. Nieh and R.E. Lewis, ‘Microstructural characterization of Rapidly Solidified
Al–V–Zr Alloys,’ in Light–Weight Alloys for Aerospace Applications , pp. 59–69, edited by
E.W. Lee, E.H. Chia, and N.J. Kim, The Minerals, Metals & Materials Society, Warrendale,
PA, (1989).
61. T.G. Nieh and J. Wadsworth, ‘Characterization of Superplastic Y–TZP Using a Hot Indentation
Technique,’ Scripta Metall.
, 23, 1261–1264 (1989).
62. T.G. Nieh, C.M. McNally and J. Wadsworth, ‘Superplasticity of Intermetallic Alloys and
Ceramics,’ JOM (formerly J. Metals) , 41(9), 31–35 (1989).
63. T.G. Nieh, J. Wadsworth, and C.T. Liu, ‘Mechanical Properties of Nickel Beryllides,’ J. Mater.
Res.
, 4(12), 1347–1353 (1989).
64. T.G. Nieh, D.L. Yaney, and J. Wadsworth, ‘Analysis of Grain Boundaries in a Fine–Grained,
Superplastic, Yttria–Containing, Tetragonal Zirconia,’ Scripta Metall.
, 23, 2007–2012 (1989).
65.
T.G. Nieh and J. Wadsworth, ‘Superplastic Behavior of a Fine–Grained, Yttria–Stabilized,
Tetragonal Zirconia Polycrystal (Y–TZP),’ Acta Metall. Mater.
, 38, 1121–1133 (1990).
66. K. Xia, T.G. Nieh, J. Wadsworth, and T.G. Langdon, ‘The Creep Properties of Aluminum
Composites Reinforced with SiC,’ in Fundamental Relationships between Microstructure &
Mechanical Properties of Metal–Matrix Composites , pp. 543–555, edited by P.K. Liaw and
M.N. Gungor, The Minerals, Metals, and Materials Society, Warrendale, PA, (1990).
67. T.G. Nieh, J. Wadsworth, and C.T. Liu, ‘Nickel Beryllides and Their Properties,’ in High
Temperature Aluminides & Intermetallics , pp. 453–462, edited by S.H. Whang, C.T. Liu, D.P.
Pope, and J.O. Stiegler, The Minerals, Metals & Materials Society, Warrendale, PA (1990).
68. A. Joshi, D. Gardner, H.S. Hu, J. Mardinly, and T.G. Nieh, ‘Aluminum–Samarium Alloys for
Interconnections in Integrated Circuits,’ J. Vac. Sci. Technol.
, 8A(3), 1480–1483 (1990).
69. T.G. Nieh and J. Wadsworth, ‘Superplastic Ceramics,’ Ann. Rev.–Mater. Sci.
, 20, 117–140
(1990).
70. T.G. Nieh and J. Wadsworth, ‘Effect of Grain Size on Superplastic Behavior of Y–TZP,’
Scripta Metall. Mater.
, 24, 763–766 (1990).
71. T.G. Nieh, J. Wadsworth, and O.D. Sherby, ‘Superplastic Behavior of Ceramics, Ceramic
Composites, Metal Matrix Composites, and Intermetallics,’ in
Superplasticity in Aerospace II , pp. 19–32, edited by T.R. McNelly and C. Heikkenen, The Minerals, Metals & Materials
Society, Warrendale, PA (1990).
72. T.C. Chou and T.G. Nieh, ‘Solid–State Reaction Between Ni3Al and SiC,’ J. Mater. Res.
, 5,
1985–1994 (1990).
73. T.G. Nieh and J. Wadsworth, ‘Hot Indentation Tests of Refractory Metal Beryllides,’ Scripta
Metall. Mater.
, 24, 1489–1494 (1990).
74. T.G. Nieh and J. Wadsworth, ‘Effect of Grain Size on Superplastic Behavior of Al2O3/YTZ,’ J.
Mater. Res., 5(11), 2613–2615 (1990).
75. T.C. Chou and T.G. Nieh, ‘The Formation of Epitaxial Habit Planes at MoSi2/IrSi Interfaces,’
Scripta Metall. Mater.
, 24, 1935–1940 (1990).
76. T.G. Nieh, ‘Superplasticity in L12 Intermetallic Alloys,’ Symposium on Superplasticity in
Metals, Ceramics, and Intermetallics , MRS Proceeding No. 196, pp. 189–200, edited by M.J.
Mayo, M. Kobayashi, and J. Wadsworth, Materials Research Society, Pittsburgh, PA (1990).
77. T.G. Nieh, C.M. Tomasello, and J. Wadsworth, ‘Dynamic Grain Growth in Superplastic
Ceramics and Ceramic Composites,’ Symposium on Superplasticity in Metals, Ceramics, and
Intermetallics , MRS Proceeding No. 196, pp. 343–348, edited by M.J. Mayo, M. Kobayashi, and J. Wadsworth, Materials Research Society, Pittsburgh, PA (1990).
78. T.G. Nieh and J. Wadsworth, ‘Superplastic Deformation Mechanisms in a Fine–Grained,
Yttria–Stabilized Tetragonal Zirconia Polycrystal,’ Symposium on Superplasticity in Metals,
Ceramics, and Intermetallics , MRS Proceeding No. 196, pp. 331–336, edited by M.J. Mayo, M.
Kobayashi, and J. Wadsworth, Materials Research Society, Pittsburgh, PA (1990).

79. A. Chokshi, D.J. Schissler, T.G. Nieh, and J. Wadsworth, ‘A Comparative Study of
Superplastic Deformation and Cavitation Failure in a Yttria Stabilized Zirconia and a Zirconia
Alumina Composite" Symposium on Superplasticity in Metals, Ceramics, and Intermetallics ,
MRS Proceeding No. 196, pp. 379–384, edited by M.J. Mayo, M. Kobayashi, and J.
Wadsworth, Materials Research Society, Pittsburgh, PA (1990).
80.
T.G. Nieh and J. Wadsworth, ‘Hall–Petch Relation in Nanocrystalline Solids,’
Scripta Metall.
Mater.
, 25, 955–958 (1991).
81. A.H. Chokshi, T.G. Nieh, and J. Wadsworth, ‘Role of Concurrent Cavitation in the Fracture of a Superplastic Zirconia–Alumina Composite,’ J. Am. Ceram. Soc.
, 74, 869–873 (1991).
82. T.C. Chou and T.G. Nieh, ‘Explosive Anisotropic Grain Growth of delta–NiMo by Solid State
Diffusion,’ Appl. Phys. Lett.
, 58(23), 2642–2644 (1991).
83. J.S. Lee, J.J. Stephens, and T.G. Nieh, ‘Compatibility of Various Reinforcements and Their
Effects on the Oxidation of Niobium Aluminides,’ in High Temperature Niobium Alloys , pp. 143–155, edited by J.J. Stephens and I. Ahmad, The Minerals, Metals & Materials Society,
Warrendale, PA (1991).
84. T.C. Chou and T.G. Nieh, ‘The Formation of NiAl Phase and Layered Carbon Precipitates during SiC/Ni3Al Solid State Reactions,’ in High–Temperature Ordered Intermetallic Alloys
IV , Mat. Res. Soc. Symp. Proc., Vol. 213, pp. 1045–1050, edited by J. Stiegler, D. Pope, and
C. Koch, Materials Research Society, Pittsburgh, PA (1991).
85. T.G. Nieh and J. Wadsworth, ‘Superplastic Deformation and Mechanisms in Fine–Grained
Y–TZP,’ in Ceramics Today – Tomorrow's Ceramics , Materials Science Monographs, 66C, pp. 1527–1536, edited by P. Vincenzini, Elsevier Science Publisher B.V., Amsterdam,
Netherlands, (1991).
86. T.G. Nieh and J. Wadsworth, ‘Superplasticity in Fine–Grained YTZ Composites,’ in
" Advanced Composite Materials", Ceram. Trans., Vol. 19, pp. 707–713, edited by M.D. Sacks,
American Ceramic Society, Westerville, Ohio, (1991).
87. J.P. Wittenauer and T.G. Nieh, ‘Fine–Grained W–Cu–Co Alloys via Liquid Phase Sintering,’ in
Tungsten and Tungsten Alloys– Recent Advances , pp. 21–26, edited by E. Chen, I. Ahmad, R.
Ammon, and A. Crowson, The Minerals, Metals & Materials Society, Warrendale, PA, (1991).
88. J.P. Wittenauer and T.G. Nieh, ‘Mechanical Behavior of CVD Tungsten Sheet,’ in Tungsten and Tungsten Alloys– Recent Advances , pp. 169–173, edited by E. Chen, I. Ahmad, R. Ammon, and A. Crowson, The Minerals, Metals & Materials Society, Warrendale, PA, (1991).
89. T.C. Chou and T.G. Nieh, ‘Interfacial Reaction of SiC with NiAl,’ Scripta Metall. Maters., 25,
2059–2064 (1991).
90. T.G. Nieh, J. Wadsworth, and F. Wakai, ‘Recent Advances in Superplastic Ceramics and
Ceramic Composites,’ Inter. Mater. Rev.
, 36(4), 146–161 (1991).
91. T.C. Chou, T.G. Nieh, S.D. McAdams, and G.M. Pharr, ‘Microstructures and Mechanical
Properties of Thin Films of Aluminum Oxide,’
Scripta Metall. Mater. 25, 2203–2208 (1991).
92. T.C. Chou and T.G. Nieh, ‘Nucleation and Concurrent Anomalous Grain Growth of
Alpha-Al2O3 during Gamma to Alpha Phase Transformation,’ J. Am. Ceram. Soc.
, 74[9],
2270–2279 (1991).
93.
D.J. Schissler, A.H. Chokshi, T.G. Nieh, and J. Wadsworth, ‘Microstructural Aspects of
Superplastic Tensile Deformation and Cavitation Failure in a Fine–Grained, Yttria Stabilized,
Tetragonal Zirconia,’ Acta Metall. Mater.
, 39(12), 3227–3236 (1991).
94. T.G. Nieh and J. Wadsworth, ‘Superplasticity in Fine–Grained 20%Al2O3/YTZ Composite,’
Acta Metall. Mater.
, 39(12), 3037–3045 (1991).
95. T.G. Nieh and J. Wadsworth, ‘High Strain Rate Superplasticity in Aluminum Matrix
Composites,’ Mater. Sci. Eng.
, A147, 229–237 (1991).
96. J. Wadsworth, T.G. Nieh, and O.D. Sherby, ‘Future Directions for Superplasticity,’ in
International Conference on Superplasticity in Advanced Materials (ICSAM–91) , pp. 13–22, eds. S. Hori, M. Tokizane, and N. Furushiro, The Japan Society for Research on Superplasticity,
(1991).
97. T.G. Nieh and J. Wadsworth, ‘Superplastic Ceramic Composites,’ in International Conference on Superplasticity in Advanced Materials (ICSAM–91) , pp. 257–262, eds. S. Hori, M. Tokizane, and N. Furushiro, The Japan Society for Research on Superplasticity, (1991).
98.
T.G. Nieh and J. Wadsworth, ‘High Strain Rate Superplasticity in Whisker–Reinforced
Aluminum Composites,’ in International Conference on Superplasticity in Advanced Materials
(ICSAM–91) , pp. 339–348, eds. S. Hori, M. Tokizane, and N. Furushiro, The Japan Society for
Research on Superplasticity, (1991).

99. G.M. Pharr, S.N. Courington, J. Wadsworth, and T.G. Nieh, ‘Deformation of an Extruded
Nickel Beryllide between Room Temperature and 820°C,’
J. Mater. Res.
, 6(12), 2653–2659
(1991).
100. T.C. Chou, D. Adamson, J. Mardinly, and T.G. Nieh, ‘The Microstructural Evolution in
Nanocrystalline Alumina Made by Reactive Sputtering Deposition,’ Thin Solid Films , 205,
131–139 (1991).
101. K. Higashi, T. Okada, T. Mukai, S. Tanimura, T.G. Nieh, and J. Wadsworth, ‘Superplastic
Behavior in a Mechanically–Alloyed Aluminum Composite Reinforced with SiC Particulates,’
Scripta Metall. Maters.
, 26, 185–190 (1992).
102. J.P. Wittenauer, T.G. Nieh, and J. Wadsworth, ‘A First Report on Superplastic Gas–Pressure
Forming of Ceramic Sheet,’ Scripta Metall. Maters.
, 26(4), 551–556 (1992).
103. T.G. Nieh, J. Wadsworth, and T. Imai, ‘A Rheological View of High–Strain–Rate
Superplasticity in Metallic Alloys and Composites,’ Scripta Metall. Mater.
, 26(5), 703–708
(1992).
104. T.G. Nieh, K. Forbes, T.C. Chou, and J. Wadsworth, ‘Microstructures and Deformation
Properties from Room Temperature to 1400°C of an Al2O3–Ni3Al Composite,’ in
Developments in Ceramic and Metal–Matrix Composites , pp. 85–96, edited by K. Upadhya,
The Minerals, Metals & Materials Society, Warrendale, PA, (1992).
105. J.P. Wittenauer and T.G. Nieh, ‘Characterization of Beryllium Foils Produced by Hot Rolling,’
J. Mater. Sci., 27, 2653–2659 (1992).
106. T.G. Nieh, J. Wadsworth, F.C. Grensing, and J.–M. Yang, ‘Mechanical Properties of Vanadium
Beryllide, VBe12,’ J. Mater. Sci.
, 27, 2660–2664 (1992).
107. T.C. Chou and T.G. Nieh, ‘New Observations of MoSi2 Pest at 500°C,’ Scripta Metall. Mater.
,
26, 1637–1642 (1992).
108. T.C. Chou and T.G. Nieh, ‘Microstructural Characteristics of Layered Metastable Phases,’
Scripta Metall. Mater.
, 26, 1895–1900 (1992).
109. T.C. Chou and T.G. Nieh, ‘Nucleation and Abnormal Grain Growth of Alpha Al2O3 in
Gamma–Alumina Matrix,’ in Phase Transformation in Thin Films , edited by M. Chen, M.
Thompson, R. Schwartz, and M. Libera, Mat. Res. Soc. Symp. Proc. Vol. 230, Materials
Research Society, Pittsburgh, PA, (1992).
110. T.C. Chou and T.G. Nieh, ‘Phase Transformation and Mechanical Properties of Thin MoSi2
Films Produced by Sputtering Deposition,’ Thin Solid Films, 214, 48–57 (1992).
111. J. Wadsworth, P.A. Kramer, S.E. Dougherty, and T.G. Nieh, ‘Evidence of Dislocation Glide
Controlled Creep in Niobium–Base Alloys,’ Scripta Metall. Mater.
, 27(1), 71–76 (1992).
112. J. Wadsworth and T.G. Nieh, ‘Superplasticity in Ceramics and Ceramic Composites,
Intermetallics, and Metal Matrix Composites,’ in Superplastic Forming and Bonding of
Metallic Alloys, pp. EM92–193–1–EM92–193–19, edited by F.H. Froes, Society of
Manufacturing Engineers, Dearborn, Michigan, (1992).
113. J.P. Wittenauer, T.G. Nieh, and J. Wadsworth, ‘Tungsten and Tungsten Alloys for Structural
Applications: Synthesis, Properties, and Processing,’ Adv. Mater. Processes , 142(3), 28–37
(1992).
114.
T.C. Chou, T.G. Nieh, and J. Wadsworth, ‘Stability of ZrBe13, Nb2Be17, and NiBe
Intermetallics during Intermediate Temperature Oxidation,’ Scripta Metall. Mater.
, 27,
881–886 (1992).
115. T.C. Chou, T.G. Nieh, and J. Wadsworth, ‘Structural Evolution in Niobium Beryllides during
Mechanical Alloying,’
Scripta Metall. Mater.
, 27, 897–902 (1992).
116. T.C. Chou and T.G. Nieh, ‘Comparative Studies on the Pest of Single– and Poly–Crystalline
MoSi2,’ Scripta Metall. Mater.
, 27, 19–24 (1992).
117. T.C. Chou, T.G. Nieh, T.Y. Tsui, G.M. Pharr, and W.C. Oliver, ‘Mechanical Properties and
Microstructures of Metal/Ceramic Microlaminates: Part I. a Nb/MoSi2 System,’ J. Mater. Res.
,
7(10), 2765–2773 (1992).
118. T.C. Chou, T.G. Nieh, S.D. McAdams, G.M. Pharr, and W.C. Oliver, ‘Mechanical Properties and Microstructures of Metal/Ceramic Microlaminates: Part II. a Mo/Al2O3 System,’ J. Mater.
Res.
, 7(10), 2774–2784 (1992).
119. T.G. Nieh and J. Wadsworth, ‘Superplasticity and Superplastic Forming of Aluminum Metal
Matrix Composites,’ JOM , 44(11), 46–50 (1992).
120. T.C. Chou and T.G. Nieh, ‘Anisotropic Grain Growth of Delta–NiMo Compound by
Exothermic Solid State Diffusional Intermixing,’
Thin Solid Films , 219, 52–62 (1992).
121. T.C. Chou and T.G. Nieh, ‘Interface–Controlled Phase Transformation and Abnormal Grain

Growth of Alpha–Al2O3 in Thin Gamma–Alumina Films,’ Thin Solid Films , 221, 89–97
(1992).
122. T.C. Chou and T.G. Nieh, ‘Mechanism of MoSi2 Pest during Low Temperature Oxidation,’ J.
Mater. Res.
, 8, 214–226 (1993).
123. T.G. Nieh and J. Wadsworth, ‘Effects of Zr on the High Strain Rate Superplasticity of 2124 Al,’
Scripta Metall. Mater.
, 28, 1119–1124 (1993).
124. J.P. Wittenauer, T.G. Nieh, and J. Wadsworth, ‘Superplastic Forming of a Zirconia Ceramic
Sheet,’ in Processing and Fabrication of Advanced Materials , pp. 541–557, ed. J.J. Morris, The
Minerals, The Metals & Materials Society, Warrendale, PA, (1993).
125.
T.G. Nieh, T.C. Chou, J. Wadsworth, D. Owen, and A.H. Chokshi, ‘Creep of a Niobium
Beryllide, Nb2Be17,’ J. Mater. Res., 8 (4), 757–763 (1993).
126. J. Wadsworth, T.G. Nieh, and O.D. Sherby, ‘Superplasticity in Ceramics and Ceramic
Composites, and High Strain Rate Superplasticity in Metal Matrix Composites,’ in
International Conference on Advanced Synthesis of Engineered Structural Materials , pp. 269–275, edited by J.J. Morris, E.J. Lavernia, and F.H. Froes, ASM International, Materials
Park, OH, (1993).
127. T.C. Chou and T.G. Nieh, ‘Kinetics of MoSi2 Pest during Low Temperature Oxidation,’ J .
Mater. Res.
, 8(7) 1605–1610 (1993).
128. J. P. Wittenauer, T.G. Nieh, and J. Wadsworth, ‘Superplastic Gas–Pressure Deformation of
Y–TZP Sheet,’ J. Am. Ceram. Soc.
, 76, 1665–1672 (1993).
129. J. Wadsworth and T.G. Nieh, ‘Superplasticity in Ceramics and Metal–Matrix Composites and the Role of Grain Size, Segregation, Interfaces, and Second Phase Morphology,’ Mater. Sci.
Eng., A166, 97–108 (1993).
130. T.C. Chou and T.G. Nieh, ‘Pesting of the High–Temperature Intermetallic MoSi2,’ JOM , 45
(12), 15–21 (1993).
131.
T.C. Chou and T.G. Nieh, ‘Nucleation and Growth of MoSi2 Pest During Low Temperature
Oxidation,’ in Environmental Effects of Intermetallics–MRS Proceedings Vol. 288 , pp. 965–970, edited by M.O. Thompson, Materials Research Society, Pittsburgh, PA, (1993).
132. J. Wadsworth, J. Wittenauer, and T.G. Nieh, ‘Strengthening and Toughening in Refractory
Metal Alloys,’ in
Critical Issues in the Development of High Temperature Structural Materials , pp. 189–202, edited by N.S. Stoloff, D.J. Duquette, and A.F. Giamei, The Minerals, Metals &
Materials Society, Warrendale, PA, (1994).
133. T.G. Nieh and J. Wadsworth, ‘Recent Advances and Developments in Refractory Alloys,’ in
High Temperature Materials–MRS Proceedings Vol. 322 , pp. 315–327, edited by C.L. Briant,
J.J. Petrovic, B.P. Bewlay, A.K. Vesudevan, and H.A. Lipsitt, Materials Research Society,
Pittsburgh, PA (1994).
134. T.G. Nieh, ‘Structure and Deformation of Intermetallic Beryllides,’ J. Mater. Sci. Technol.
, 10,
391–405 (1994). – also published in Ordered Intermetallics (IWOI '92) , pp. 239–258, edited by
D.L. Lin and C.T. Liu, National Natural Science Foundation of China, 1994.
135. K. Higashi, T. Okada, T. Mukai, S. Tanimura, T.G. Nieh, and J. Wadsworth, ‘Effect of
Temperature Dependence of Mechanical Properties at High Strain Rates in Three
Mechanically–Alloyed Aluminum Alloys,’ Proc. 37th Japan Congress on Materials Research, pp. 27–32, Society of Materials Science, Kyoto, Japan, (1994).
136. T.C. Chou and T.G. Nieh, ‘Pest Disintegration of Thin MoSi2 Films by Oxidation at 500°C,’ J.
Mater. Sci.
, 29, 2963–2967 (1994).
137. T. Hikosaka, T. Imai, T.G. Nieh, and J. Wadsworth, ‘High Strain Rate Superplasticity of a SiC
Particulate Reinforced Aluminum Alloy Composite by a Vortex Method,’ Scripta Metall.
Mater.
, 31, 1181–1186 (1994).
138. T.G. Nieh and J. Wadsworth, ‘Biaxial Gas–Pressure Forming of a Superplastic Al2O3/YTZP,’
J. Mater. Eng. Performance , 3(4), 496–500 (1994).
139. T.G. Nieh, T. Imai, J. Wadsworth, and S. Kojima, ‘High Strain Rate Superplasticity of a
Powder Metallurgy SiC Particulate Reinforced 6061 Al Composite (6061/SiC/17.5p),’ Scripta
Metall. Mater.
, 31, 1685–1690 (1994).
140.
K. Higashi, T.G. Nieh, and J. Wadsworth, ‘A Comparative Study of Superplasticity and
Cavitation in Mechanically–Alloyed IN9021 and a SiCp/IN9021 Composite,’ J. Mater. Sci.
Eng.
, 188A, 167–173 (1994).
141. E. Taleff, G.A. Henshall, D.R. Lesuer, and T.G. Nieh, ‘Warm Formability of
Aluminum–Magnesium Alloys,’ in Aluminum Alloys Vol. 1
–
Their Physical and Mechanical
Properties (ICAA4) , edited by T.H. Sanders, Jr. and E.A. Starke, Jr., pp. 338–345, The Georgia

Institute of Technology Press, 1994.
142.
T.G. Nieh and J. Wadsworth, ‘High Strain Rate Superplasticity of a Powder Metallurgy
Zr–Modified 2124 Al Alloy,’ in Aluminum Alloys Vol. 2 – Their Manufacture and Processing
(ICAA4) , edited by T.H. Sanders, Jr. and E.A. Starke, Jr., pp. 48–55, The Georgia Institute of
Technology Press, 1994.
143.
K. Higashi, T. Okada, T. Mukai, S. Tanimura, T.G. Nieh, and J. Wadsworth, ‘An Investigation of Cavitation in a Mechanically Alloyed 15 vol% SiCp/IN9021 Aluminum Composite,’ in
Transaction of the Materials Research Society of Japan Vol 16B – Composites, Grain
Boundaries and Nanophase Materials , pp. 989–994, edited by M. Sakai, M. Kobayashi, T.
Suga, R. Watanabe, Y. Ishida, and K. Niihara, Elsevier Science, Netherland, 1994.
144. T.G. Nieh and J. Wadsworth, ‘Gas–Pressure Forming of Ceramic Sheet,’ in Transaction of the
Materials Research Society of Japan Vol 16B – Composites, Grain Boundaries and Nanophase
Materials , pp. 1061–1064, edited by M. Sakai, M. Kobayashi, T. Suga, R. Watanabe, Y. Ishida, and K. Niihara, Elsevier Science, Netherland, 1994.
145. T.G. Nieh, J. Wadsworth, and K. Higashi, ‘High Strain Rate Superplasticity in Metals and
Composites,’ in Transaction of the Materials Research Society of Japan Vol 16B – Composites,
Grain Boundaries and Nanophase Materials , pp. 1027–1032, edited by M. Sakai, M.
Kobayashi, T. Suga, R. Watanabe, Y. Ishida, and K. Niihara, Elsevier Science, Netherland,
1994.
146. S.E. Dougherty, T.G. Nieh, J. Wadsworth, and Y. Akimune, ‘Mechanical Properties of a
20%SiC Whisker–Reinforced Y–TZP at Elevated Temperatures,’ J. Mater. Res.
, 10(1),
113–118 (1995).
147. O.D. Sherby, T.G. Nieh and J. Wadsworth, ‘Overview on Superplasticity Research on
Small–Grained Materials,’ in Materials Science Forum Vols. 170–172 , edited by T.G. Langdon, pp. 13–22, Trans Tech Publications, Switzerland, 1994.
148.
T.G. Nieh and J. Wadsworth, ‘Superplasticity and Superplastic Forming of Ceramics,’ in
Materials Science Forum Vols. 170–172 , edited by T.G. Langdon, pp. 359–368, Trans Tech
Publications, Switzerland, 1994.
149. T.G. Nieh, D.R. Lesuer, and C. Syn, ‘Tensile and Fatigue Properties of a 25 vol% SiC
Particulate Reinforced 6090 Al Composite at 300°C,’ Scripta Metall. Mater.
, 32, 707–712
(1995).
150. K. Higashi, T.G. Nieh, M. Mabuchi, and J. Wadsworth, ‘Effect of Liquid Phases on the Tensile
Elongation of Superplastic Aluminum Alloys and Composites,’ Scripta Metall. Mater.
, 32,
1079–1084 (1995).
151. J.N. Wang and T.G. Nieh, ‘Effects of the Peierls Stress on the Transition from Power Law
Creep to Harper–Dorn Creep,’ Acta Metall. Mater.
, 43, 1415–1419 (1995).
152. K. Higashi, T. Okada, T. Mukai, S. Tanimura, T.G. Nieh, and J. Wadsworth, ‘Superplasticity in
Very Fine Grained Al–Based Alloys Produced by Mechanical Alloying,’ Mater. Trans. JIM ,
36(2), 317–322 (1995).
153. T.G. Nieh and J. Wadsworth, ‘Superplasticity in a Powder Metallurgy Magnesium Composite,’
Scripta Metall. Mater.
, 32, 1133–1138 (1995).
154.
D.R. Lesuer, J. Wadsworth, and T.G. Nieh, ‘Forming of Superplastic Ceramics", in
High
Performance Materials in Engine Technology , pp. 103–114, edited by P. Vincenzini, Techna
Srl, 1995. (also printed in Ceramics International, 22, 381–388, 1996.)
155. J.N. Wang and T.G. Nieh, ‘A Note on the Creep of a Single–Crystal, Ni–based Superalloy,’
Scripta Metall. Mater., 32, 1973–1976 (1995).
156. K. Higashi, T.G. Nieh and J. Wadsworth, ‘Effect of Temperature on the Mechanical Properties of Mechanically–Alloyed Materials at High Strain Rates,’ Acta Metall. Mater.
, 43, 3275–3282
(1995).
157.
T.G. Nieh and J.N. Wang, ‘Stress Change and its Implication for the Reduction of Primary
Creep in Gamma–TiAl,’ Scripta Metall. Mater.
, 33, 1101–1107 (1995).
158. E.M. Taleff, G.A. Henshall, D.R. Lesuer, T.G. Nieh, and J. Wadsworth, ‘Enhanced Tensile
Ductility of Coarse–Grain Al–Mg Alloys,’ in Superplasticity and Superplastic Forming 1995 , pp. 3–10, edited by A.K. Ghosh and T.R. Bieler, The Minerals, Metallurgy, and Materials
Society, Warrendale, PA, 1995.
159. J.N. Wang and T.G. Nieh, ‘Incorporation of Peierls Stress into Deformation Mechanism Maps,’
Scripta Metall. Mater., 33, 633–638 (1995).
160. J. Wadsworth and T.G. Nieh, ‘Superplastic Ceramics and Intermetallics and Their Potential
Applications" in Superplasticity: 60 Years after Pearson , pp. 121–132, edited by N. Ridley,
The Institute of Materials, London, 1995.

161. T.G. Nieh, D.R. Lesuer, and C.K. Syn, ‘Characterization of a Commercial Superplastic
Stainless Steel SuperDux64,’
Mater. Sci. Eng.
, 202A, 43–51 (1995).
162. J.N. Wang and T.G. Nieh, ‘Role of Peierls Stress on Power Law Dislocation Creep,’ Mater. Sci.
Eng.
, 202A, 52–56 (1995).
163. J.N. Wang, A.J. Schwartz, T.G. Nieh, C.T. Liu, V.K. Sikka, and D.R. Clemens, ‘Creep of a
Fine–Grained, Fully–Lamellar, Two–Phase TiAl Alloy at 760°C,’ in Intermetallic Alloys , pp.
949–958, edited by Y.–W. Kim, R. Wagner, and M. Yamaguchi, The Minerals, Metallurgy, and
Materials Society, Warrendale, PA, 1995.
164. C.T. Liu, P.J. Maziasz, D.R. Clemens, J.H. Schneibel, V.K. Sikka, T.G. Nieh, J. Wright, and
L.R. Walker, ‘Room and Elevated Temperature Mechanical Properties of PM TiAl Alloy
Ti–47Al–2Cr–2Nb,’ in Intermetallic Alloys , pp. 679–688, edited by Y.–W. Kim, R. Wagner, and M. Yamaguchi, The Minerals, Metallurgy, and Materials Society, Warrendale, PA, 1995.
165. T.G. Nieh and J. Wadsworth, ‘Recent Advances in Superplastic Intermetallics,’ Acta Metall.
Sinica , 8, 405–418, (1995).
166. P. Luo and T.G. Nieh, ‘Synthesis of Ultrafine Hydroxyapatite Particles by a Spray Dry Method,’
Mater. Sci. Eng.
, C3, 75–78 (1995).
167. J. Wadsworth, G.A. Henshall, T.G. Nieh, and E.M. Taleff, ‘Materials Issues in Some Advanced
Forming Techniques, Including Superplasticity,’ in
Emerging Technologies, Book No. I00386 , pp. 87–94, Edited by T.J. Bennett and G.A. Hazelrigg, ASME, 1995.
168. T. Mukai, T.G. Nieh, and K. Higashi, ‘Influence of Strain Rate on the Mechanical Properties in a Magnesium–Base Composite,’ in Metallurgical and Materials Applications of Shock–Wave and High–Strain–Rate Phenomena , pp. 885–891, edited by L.E. Murr, K.P. Staudhammer, and
M.A. Meyers, Elsevier Science B.V., 1995.
169. P. Luo, T.G. Nieh, A.J. Schwartz, and T.J. Lenk, ‘Surface Characterization of Nanostructured
Metal and Ceramic Particles,’ Mater. Sci. Eng.
, 204A, 59–64 (1995).
170. T.G. Nieh, A.J. Schwartz, and J. Wadsworth, ‘Superplasticity in a 17 vol%SiC Particulate
Reinforced Magnesium Composite (ZK60/SiC/17p),’ Mater. Sci. Eng.
, 208A, 30–36 (1996).
171. J.N. Wang, A.J. Schwartz, T.G. Nieh, and D. Clemens, ‘Reduction of Primary Creep in TiAl
Alloys by Prestraining,’ Mater. Sci. Eng. A , 206, 63–70 (1996).
172.
J.N. Wang and T.G. Nieh, ‘A New Interpretation of the Mechanisms in Newtonian Creep of
Uranium Dioxides,’ J. Nucl. Mater.
, 228, 141–147 (1996).
173. E.M. Taleff, G.A. Henshall, D.R. Lesuer, T.G. Nieh, and J. Wadsworth, ‘Enhanced Tensile
Ductility in Al–Mg Alloys by Solid Solution Interactions,’ in Aluminum and Magnesium for
Automobile Applications , pp. 125–134, edited by J.D. Bryant and D.R. White, The Minerals,
Metals, and Materials Society, Warrendale, PA, 1996.
174. J. Huang, A.J. Schwartz, and T.G. Nieh, ‘High Temperature Deformation in 2036 Al and 0.2 wt% Zr–2036 Al,’ in Aluminum and Magnesium for Automotive Applications , pp. 149–162, edited by J.D. Bryant and D.R. White, The Minerals, Metals, and Materials Society,
Warrendale, PA, 1996.
175. D.R. Lesuer, C.K. Syn, and T.G. Nieh, ‘Elevated Temperature Tensile and Fatigue Behavior of a Metal Matrix Composite,’ in Aluminum and Magnesium for Automotive Applications , pp.
163–172, edited by J.D. Bryant and D.R. White, The Minerals, Metals, and Materials Society,
Warrendale, PA, 1996.
176. W.J. Kim, O.D. Sherby, T.G. Nieh, and G. Frommeyer, ‘Ingot Processed Eutectic Iron Carbide
(Fe–4.3 wt% C),’ Scripta Mater.
, 35, 299–303 (1996).
177.
T.G. Nieh and J. Wadsworth, ‘Effects of Grain Size, Interface, and Interphases on
Superplasticity in Ceramics and Metals Matrix Composites,’ in Progress in Materials and
Mechanics , pp. 423–428, edited by T. Wang and T.–W. Chou, Peking University Press, 1996.
178. T.G. Nieh, P. Luo, W. Nellis, D. Lesuer, and D. Benson, ‘Dynamic Compaction of Aluminum
Nanocrystals,’
Acta Mater.
, 44, 3781–3788 (1996).
179. P. Luo and T.G. Nieh, ‘Preparing Hydroxyapatite Powders with Controlled Morphology,’
Biomater.
, 17(20), 1959–1964 (1996).
180. D.J. Swenson, T.G. Nieh, and J.H. Fournelle, ‘The CaO–TiO2–ZrO2 System at 1200°C and the
Solubilities of Hf and Gd in Zirconolite,’ in
Scientific Basis for Nuclear Waste Management
XIX – MRS Proceedings Vol. 412 , pp. 337–344, edited by W.M. Murphy and D.A. Knecht,
Materials Research Society, Pittsburgh, PA (1996).
181. J. Huang, L.M. Hsiung, and T.G. Nieh, ‘Effect of Strain Rate on the Elevated–Temperature
Tensile Properties of an Al–Pb Alloy,’ Scripta Mater.
, 35, 919–924 (1996).
182. T. Imai, S. Kojima, G. L'Esperance, B.D. Hong, D. Jiang, and T.G. Nieh, ‘Effects of
Temperature on the Superplastic Characteristics of a Power–Metallurgy Pure Aluminum,’

Scripta Mater.
, 35, 1189–1193 (1996).
183.
T. Mukai, T.G. Nieh, and K. Higashi, ‘Ductility Enhancement at Elevated Temperatures in a
ZK60–Based Composite,’ in Towards Innovation in Superplasticity I , pp. 261–268, Edited by T.
Sakuma, T. Aizawa, and K. Higashi, Trans Tech Publications, Switzerland, 1997.
184. T.G. Nieh and J. Wadsworth, ‘The Role of Liquid Phase on Superplasticity in Metals and
Ceramics,’ in
Towards Innovation in Superplasticity I , pp. 383–398, Edited by T. Sakuma, T.
Aizawa, and K. Higashi, Trans Tech Publications, Switzerland, 1997.
185. L.M. Hsiung, T.G. Nieh, and D.R. Clemens, ‘Effect of Extrusion Temperature on the
Microstructure of a Powder Metallurgy TiAl–Based Alloy ,’ Scripta Mater.
, 36, 233–238
(1997).
186. T.G. Nieh and J. Wadsworth, ‘Superplasticity at High Strain Rate in Metals and Composites,’ in Materials Science Forum Volumes 243 – 245 , pp. 257–266, Edited by A.H. Chokshi, Trans
Tech Publications, Switzerland, 1997.
187.
O.D. Sherby, T.G. Nieh, and J. Wadsworth, ‘Some Thoughts on Future Directions for Research and Applications in Superplasticity,’ in Materials Science Forum Volumes 243 – 245 , pp. 11–20,
Edited by A.H. Chokshi, Trans Tech Publications, Switzerland, 1997.
188. D. R. Lesuer, T. G. Nieh, C. K. Syn, and E. M. Taleff , ‘ Superplastic Deformation in Two
Microduplex Stainless Steels,’ in Materials Science Forum Volumes 243
–
245 , pp. 469–474,
Edited by A.H. Chokshi, Trans Tech Publications, Switzerland, 1997.
189. T. Mukai, T.G. Nieh, and K. Higashi, ‘Superplastic Characteristics in a Doubly–Extruded
ZK60/SiC/17p Magnesium–Based Composite,’ in Materials Science Forum Volumes 243 – 245 , pp. 321–326, Edited by A.H. Chokshi, Trans Tech Publications, Switzerland, 1997.
190. L.M. Hsiung and T.G. Nieh, ‘Substructure in a Creep Deformed Lamellar TiAl Alloy,’ Scripta
Mater.
, 36, 323–330 (1997).
191. T.G. Nieh and J. Wadsworth, ‘Effect of Liquid Phase on Superplasticity at High Strain Rates in
Metals and Their Composites,’ in Properties of Complex Inorganic Solids , pp. 415–423, edited by A. Gonis, A.M. Meike, and P.E.A. Turchi, Plenum Publishing Co., New York, 1997.
192. T.C. Schulthess, P.E.A. Turchi, A. Gonis, and T.G. Nieh, ‘Stacking Fault Energies in Al–Based
Alloys,’ in Properties of Complex Inorganic Solids , pp. 383–388, edited by A. Gonis, A.M.
Meike, and P.E.A. Turchi, Plenum Publishing Co., New York, 1997.
193. T.G. Nieh, R. Kaibyshev, L.M. Hsiung, N. Nguyen, and J. Wadsworth, ‘Subgrain Formation and Evolution during the Deformation of an Al–Mg–Sc Alloy at Elevated Temperatures,’
Scripta Mater.
, 36, 1011–1016 (1997).
194.
L. Hsiung, A. Schwartz, and T.G. Nieh, ‘
In Situ Observation of Deformation–Induced Interface
Migration in a Fully–Lamellar TiAl Alloy,’ Scripta Mater.
, 36, 1017–1022 (1997).
195. T.G. Nieh and J. Wadsworth, ‘Effect of Liquid Phases on Superplastic Deformation,’ in Proc.
7th International Conference on Creep and Fracture of Engineering Materials and Structures , pp. 173–182, edited by J.C. Earthman and F.A. Mohamed, The Minerals, Metals, and Materials
Society, Warrendale, PA, 1997.
196. T.G. Nieh, J.N. Wang, L.M. Hsiung, J. Wadsworth, and V. Sikka, ‘Low Temperature
Superplasticity in a TiAl Alloy with a Metastable Microstructure,’ Scripta Mater.
, 37, 773–779
(1997).
197. J.G. Wang, L.C. Zhang, G.L. Chen, H.Q. Ye, and T.G. Nieh, ‘HREM Investigation on
Deformation Twinning and Twin Intersection in a Ti–45Al–10Nb Alloy Deformed at Elevated
Temperatures,’ in Structural Intermetallics 1997 , pp. 119–128, edited by M.V. Nathal, R.
Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, The Minerals,
Metals, and Materials Society, Warrendale, PA, 1997.
198. L.M. Hsiung and T.G. Nieh, ‘The Role of Interfacial Substructure in the Creep Deformation of a Fully–Lamellar TiAl Alloy,’ in Structural Intermetallics 1997 , pp. 129–136, edited by M.V.
Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, The
Minerals, Metals, and Materials Society, Warrendale, PA, 1997.
199. J.N. Wang and T.G. Nieh, ‘Effect of Minor Si Addition on the Creep of a Fully Lamellar TiAl
Alloy,’ Scripta Mater.
, 37, 1545–1550 (1997).
200. T.G. Nieh, J.N. Wang, and L.M. Hsiung, ‘Creep Deformation in Gamma TiAl Alloys with
Lamellar Structures,’ in Thermec'97–International Conference on Thermomechanical
Processing of Steels and Other Materials , pp. 1423–1431, edited by T. Chandra and T. Sakai,
The Minerals, Metals, and Materials Society, Warrendale, PA, 1997.
201.
T. Mukai, T.G. Nieh, and K. Higashi, ‘Observation of Superplasticity in a Magnesium–Based
ZK60/SiC/17p Composite at the Low Temperature of 463K,’ in Thermec'97–International
Conference on Thermomechanical Processing of Steels and Other Materials , pp. 1847–1852,

edited by T. Chandra and T. Sakai, The Minerals, Metals, and Materials Society, Warrendale,
PA, 1997.
202. T.G. Nieh and J. Wadsworth, ‘Microstructural Characteristics and Deformation Properties in
Superplastic Intermetallics,’ Mater. Sci. Eng.
, A239–240, 88–96 (1997).
203. L.M. Hsiung and T.G. Nieh, ‘The Evolution of Deformation Substructure in a Creep Deformed
Fully–Lamellar TiAl Alloy,’ Mater. Sci. Eng.
, A239–240, 438–444 (1997).
204. J.G. Wang, L.C. Zhang, G.L. Chen, H.Q. Ye, and T.G. Nieh, ‘Stress–Induced Phase
Transformations in a Hot–Deformed Ti–45Al–10Nb Alloy,’ Mater. Sci. Eng.
, A239–240,
287–292 (1997).
205. T. Mukai, H. Iwasaki, K. Higashi, and T.G. Nieh, ‘Superplasticity in a Doubly–Extruded
Magnesium Composite (ZK60/SiC/17p),’ Mater. Sci. Technol.
, 14, 32–35, (1998).
206. T.G. Nieh, R. Kaibyshev, F. Musin, and D.R Lesuer, ‘Superplasticity in a Coarse–Grained
6061 Al and the Liquid Phase Effect,’ in Superplasticity and Superplastic Forming–1998, pp.
137–144, edited by A.K. Ghosh and T.R. Bieler, The Minerals, Metals, and Materials Society,
Warrendale, PA, 1998.
207. T. Mukai, T.G. Nieh, and K. Higashi, ‘Ductility and Cavitation at Elevated Temperatures in a
Superplastic ZK60–Based Composite,’ in Superplasticity and Superplastic Forming–1998 , pp.
313–319, edited by A.K. Ghosh and T.R. Bieler, The Minerals, Metals, and Materials Society,
Warrendale, PA, 1998.
208. C.K. Syn, D.R. Lesuer, T.G. Nieh, H.S. Yang, K.R. Brown, R.O. Kaibyshev, and E. N. Petrov,
‘Superplastic Roll Forming Technology for Manufacturing Axisymmetric Automotive
Components,’ in
Automotive Alloys II , pp. 173–183, edited by S. K. Das, The Minerals, Metals, and Materials Society, Warrendale, PA, 1998.
209. L.M. Hsiung and T.G. Nieh, ‘The Role of Interfaces in Deformation Twinning of Lamellar
TiAl Crystals,’ in Boundaries and Interfaces in Materials: The David Smith Symposium , pp.
89–94, edited by R.C. Pond, W.A.T. Clark, A.H. King, and D.B. Williams, The Minerals,
Metals, and Materials Society, Warrendale, PA, 1998.
210. T.G. Nieh and J. Wadsworth, ‘Improved Microyield Strength in Beryllium Produced by Vapor
Deposition,’ Scripta Mater.
, 38(6), 863–868 (1998).
211.
E.M. Taleff, G.A. Henshall, T.G. Nieh, D.R. Lesuer, and J. Wadsworth, ‘Warm–Temperature
Tensile Ductility in Al–Mg Alloys,’ Metall. Mater. Trans.
, 129A(3A), 1081–1091 (1998).
212. J.N. Wang and T.G. Nieh, ‘The Role of Ledges in Creep of TiAl Alloys with Fine Lamellar
Structures,’ Acta Mater.
, 46(6), 1887–1901 (1998).
213.
T.C. Schulthess, P.E.A. Turchi, A. Gonis, and T.G. Nieh, ‘Systematic Study of Stacking Fault
Energies of Random Al–Based Alloys,’ Acta Mater.
, 46(6), 2215–2221 (1998).
214. T.G. Nieh, J. Kinney, A.J.C. Ladd, and J. Wadsworth, ‘Morphology and Elastic Properties of
Aluminum Foams Produced by a Casting Technique,’ Scripta Mater.
, 38(10), 1487–1494
(1998).
215. T.G. Nieh, L.M. Hsiung, J. Wadsworth, and R. Kaibyshev, ‘High Strain Rate Superplasticity in a Continuously Recrystallized Al–6%Mg–0.3%Sc Alloy,’ Acta Mater . 46(8), 2789–2800
(1998).
216. T. Mukai, T.G. Nieh, H. Watanabe, and K. Higashi, ‘Superplastic Behavior of
Doubly–Extruded ZK60/SiC/17p Magnesium–Based Composite over a Wide Temperature
Range,’ The 3rd Pacific Rim International Conference on Advanced Materials and Processing, pp. 1891–1896, edited by M.A. Iman, R. DeNale, S. Hanada, Z. Zhong, and D.N. Lee, The
Minerals, Metals, and Materials Society, Warrendale, PA, 1998.
217. L.M. Hsiung and T.G. Nieh, ‘Creep Mechanisms and Interface–Enhanced Deformation
Twinning in a Two–Phase Lamellar TiAl Alloy,’ The 3rd Pacific Rim International Conference on Advanced Materials and Processing, pp. 783–788, edited by M.A. Iman, R. DeNale, S.
Hanada, Z. Zhong, and D.N. Lee, The Minerals, Metals, and Materials Society, Warrendale, PA,
1998.
218. T. Mukai, H. Watanabe, T.G. Nieh, and K. Higashi, ‘Superplastic Behavior in ZK60 Alloy and its Composite,’ in Magnesium Alloys and their Applications , pp 395–400, edited by B.L.
Mordike, K.U. Kainer, Werkstoff-Informations gesellshaft mbH, Frankfurt, 1998.
219. J.G. Wang, L.M. Hsiung, and T.G. Nieh, ‘Formation of Deformation Twins in a Crept Lamellar
TiAl Alloy,’ Scripta Mater.
39(7), 957–962 (1998).
220. T.G. Nieh, J. Wadsworth, ‘Improved Understanding of the Mechanical Behavior of
Molybdenum Alloys at Elevated Temperatures,’ in
Molybdenum and Molybdenum Alloys , pp.
89–98, edited by A. Crowson, E.S. Chen, J.A. Shields, and P.R. Subramanian, The Minerals,
Metals, and Materials Society, Warrendale, PA, 1998.

221. L.M. Hsiung and T.G. Nieh, ‘Creep Deformation of Lamellar TiAl Alloys Controlled by
Viscous Glide of Interfacial Dislocations,’ in Interstitial and Substitutional Solute Effects in
Intermetallics , pp. 201–210, edited by I. Baker, R.D. Noebe, and E.P. George, The Minerals,
Metals, and Materials Society, Warrendale, PA, 1998.
222. T.G. Nieh, ‘High Strain Rate Superplasticity in Some Lightweight Alloys and Their
Composites,’ in
Advanced Light Alloys and Composites , pp. 467–476, edited by R. Ciach,
Kluwer Academic Publishers, Dordrecht, Netherland, 1998.
223. T.G. Nieh and J. Wadsworth, ‘Fine–Structure Superplastic Materials,’ J. Chinese Inst. Eng.
21(6), 659–690 (1998).
224. D.J. Swenson, T.G. Nieh, and J.H. Fournelle, ‘Solid State Phase Relationships in the
Calcia–Titania–Zirconia System at 1200°C,’ J. Am. Ceram. Soc., 81(12), 3249–3252 (1998).
225. M.E. Kassner, T.G. Nieh , D.A. Hughes, M.G. Stout, and J.S. Vetrano, ‘Metal Forming at the
United States Department of Energy Center of Excellence for the Synthesis and Processing of
Advanced Materials,’ la Metallurgia italiana 90 (12), 37–45, (1998).
226. T.G. Nieh, L.M. Hsiung, and J. Wadsworth, ‘Superplastic Behavior of a Powder–Metallurgy
TiAl Alloy with a Metastable Microstructure,’ Intermetallics , 7, 163–170 (1999).
227. T.G. Nieh and J. Wadsworth, ‘Recent Advances in Superplastic Intermetallics with Emphases on Titanium and Iron Aluminides,’ Towards Innovation in Superplasticity , pp. 169–176, Edited by T. Sakuma, K. Higashi, and T. Aizawa, Trans Tech Publications, Switzerland, 1999.
228. T. Mukai, T.G. Nieh, H. Watanabe, and K. Higashi, ‘Microstructure and Superplastic
Properties in an ECAE Al–4Mg–0.5Sc Alloy Processed at Elevated Temperatures,’ Towards
Innovation in Superplasticity , pp. 109–114, Edited by T. Sakuma, K. Higashi, and T. Aizawa,
Trans Tech Publications, Switzerland, 1999.
229. H. Watanabe, T. Mukai, T.G. Nieh, and K. Higashi, ‘Observation of High–Strain–Rate
Superplasticity in ZK60 Alloy and SiCp/ZK60 Composite,’ Towards Innovation in
Superplasticity , pp. 297–302, Edited by T. Sakuma, K. Higashi, and T. Aizawa, Trans Tech
Publications, Switzerland, 1999.
230. T. Mukai, H. Kanahashi, T. Miyoshi, M. Mabuchi, T.G. Nieh, and K. Higashi, ‘Experimental
Study of a Closed-Cellular Aluminum Foam for Energy Absorption under Dynamic Loading,’
Scripta Mater.
40(8), 921–927 (1999).
231. J.G. Wang, L.M. Hsiung, and T.G. Nieh, ‘Microstructural Instability in a Crept Fully Lamellar
TiAl Alloy,’ Intermetallics , 7(7), 757–763 (1999).
232. L.M. Hsiung and T.G. Nieh, ‘Creep Deformation of Fully–Lamellar TiAl Controlled by the
Viscous Glide of Interfacial Dislocations,’
Intermetallics , 7(7), 821–827 (1999).
233. T.G. Nieh, T. Mukai, C.T. Liu, and J. Wadsworth, ‘Superplastic Behavior of a
Zr–10Al–5Ti–17.9Cu–14.6Ni Metallic Glass in the Supercooled Liquid Region,’ Scripta Mater .
40(9), 1021–1027 (1999).
234. T. Mukai, H. Kanahashi, Y. Yamada, K. Shimojima, M. Mabuchi, T.G. Nieh, and K. Higashi,
‘Dynamic Compressive Behavior of an Ultra-Lightweight Magnesium Foam,’ Scripta Mater.
41(4), 365–371 (1999).
235. T.G. Nieh and J. Wadsworth, ‘Controlling High–Temperature Deformation by Varying
Microstructure in a Ti–47Al–2Cr–2Nb Alloy,’ Trans. Nonferrous Met. Soc. China , 9, 254–262
(1999).
236. J.N. Wang, B.Y. Huang, and T.G. Nieh, ‘Effects of Alloying Elements on Creep of TiAl Alloys with Fine Lamellar Structures,’ Trans. Nonferrous Met. Soc. China , 9, 263–273 (1999).
237. L.M. Hsiung and T.G. Nieh, ‘Creep Mechanisms of Fully-Lamellar TiAl Based upon Interface
Sliding,’ in High-Temperature Ordered Intermetallic Alloys VIII , (MRS Symp. vol. 552), pp.
KK1.3.1–1.3.7, edited by E.P. George, M.J. Mills, and M. Yamaguchi, Materials Research
Society, Pittsburgh, PA (1999).
238. J.G. Wang, L.M. Hsiung
2 Plates in a Fully Lamellar TiAl
Alloy During Creep Deformation,’ in High-Temperature Ordered Intermetallic Alloys VIII ,
(MRS Symp. vol. 552), pp. KK8.20.1–8.20.6, edited by E.P. George, M.J. Mills, and M.
Yamaguchi, Materials Research Society, Pittsburgh, PA (1999).
239.
T.G. Nieh and J. Wadsworth, ‘Fine–Structure Superplastic Intermetallics,’
International
Materials Review , 44(2), 59–75 (1999).
240. T.G. Nieh, T.W. Barbee, and J. Wadsworth, ‘Tensile Properties of a Free-Standing Cu/Zr
Nanolaminate,’ Scripta Mater.
, 41(9), 929–935 (1999).
241. S. Suresh, T.G. Nieh, and B.W. Choi, ‘Nano-Indentation of Copper Thin Films on Silicon
Substrates,’ Scripta Mater.
, 41(9), 951–957 (1999).
242. L.M. Hsiung and T.G. Nieh, ‘Interface Controlled Deformation Twinning in Two–Phase TiAl

with a Lamellar Microstructure,’ in Advances in Twinning pp. 239–246, edited by S. Ankem and C. Pande, The Minerals, Metals, and Materials Society, Warrendale, PA, 1999.
243. T.G. Nieh and L.M. Hsiung, ‘Role of Interfacial Dislocations on Creep of a Fully Lamellar
TiAl,’ in Creep and Fracture of Engineering Materials and Structures , pp. 685–692, edited by
T. Sakuma and K. Yagi, Trans Tech Publications, Switzerland, 1999.
244.
T.G. Nieh, J. Wang, J. Wadsworth, T. Mukai, and C.T. Liu, ‘Superplastic Deformation and
Viscous Flow in a Zr-Based Metallic Glass at 410°C,’ MRS Proceeding Vol. 554– Bulk
Metallic Glasses , pp. 379–384, edited by W.L. Johnson, A. Inoue, and C.T. Liu, Materials
Research Society, Pittsburgh, PA (1999).
245.
T. Mukai, H. Kanahashi, K. Higashi, Y. Yamada, K. Shimojima, M. Mabuchi, T. Miyoshi, and
T.G. Nieh, ‘Energy Absorption of Light-Weight Metallic Foams under Dynamic Loading,’ in
Metal Foams and Porous Metal Structures , pp. 353–358, edited by J. Banhart, M.F. Ashby, and N.A. Fleck, Verlag MIT Publication, 1999.
246.
C.T Liu and T.G. Nieh, ‘Recent Development of Metallic Materials,’ Associations for Chinese
Scientists, July 4, 1999.
247.
H. Watanabe, T. Mukai, T.G. Nieh, and K. Higashi, ‘Low-Temperature Superplasticity in a
Magnesium-Based Composite,’ Scripta Mater , 42(3), 249–255 (2000).
248.
Mikrajuddin, F.G. Shi, T.G. Nieh and K. Okuyama, ‘Electrical Conduction in Solid Polymer
Electrolytes: Temperature Dependence Mechanism,’ Microelectronics J.
31(4), 261–265
(2000).
249.
J.G. Wang, B.W. Choi, T.G. Nieh, and C.T. Liu, ‘Crystallization and Nanoindentation
Behavior of a Bulk Zr–Al–Ti–Cu–Ni Amorphous Alloy,’ J. Mater. Res.
, 15(3), 798-807
(2000).
250.
Mikrajuddin, F.G. Shi, T.G. Nieh, and K. Okuyama, ‘Metal-to-Semiconductor Transition in
Nanocrystals: Size and Temperature Dependence,’ Microelectronics J.
31(5), 343–351 (2000).
251.
H. Kanahashi, T. Mukai, Y. Yamada, K. Shimojima, M. Mabuchi, T.G. Nieh, and K. Higashi,
‘Dynamic Compression of an Ultra-Low Density Aluminum Foam,’ Mater. Sci. Eng. 280A(2),
349–353 (2000).
252.
J. G. Wang, B. W. Choi, T. G. Nieh, and C.T. Liu, ‘Nano-Scratch Behavior of a Zr-Based Bulk
Amorphous Alloy,’
J. Mater. Res.
, 15(4), 913–922 (2000).
253.
J.G. Wang, F.G. Shi, T.G. Nieh, B. Zhao, M.R. Brongo, S. Qu, and T. Rosenmayer, ‘Thickness
Dependence of Elastic Modulus and Hardness of on-Wafer Low-k Ultrathin
Polytetrafluoroethylene Films,’ Scripta Mater.
42(7), 687–694 (2000).
254.
T.G. Nieh, K. Higashi, and J. Wadsworth, ‘Effect of Cell Morphology on the Compressive
Properties of Open-Cell Aluminum Foams,’ Mater. Sci. Eng ., 283A, 105–110 (2000).
255. J. Wadsworth, and T.G. Nieh, ‘Newtonian Flow in Bulk Amorphous Alloys,’ in
Superplasticity-Past, Present, and Future , MRS Symp. No. 601, pp. 141–151, edited by P.
Berbon, M. Berbon, T.G. Langdon, and T. Sakuma, Materials Research Society, Pittsburgh, PA,
2000.
256. T. G. Nieh, T. Mukai, H. Watanabe, and K. Higashi, ‘Routes to Develop Fine-Grained
Magnesium Alloys and Composites for High Strain Rate Superplasticity,’ in
Superplasticity-Past, Present, and Future , MRS Symp. No 601, pp. 291 – 302, edited by P.
Berbon, M. Berbon, T.G. Langdon, and T. Sakuma, Materials Research Society, Pittsburgh, PA,
2000.
257.
J. Wang and T.G. Nieh, ‘Creep of a Beta Phase-Containing TiAl Alloy,’ Intermetallics , 8(7),
737-748 (2000).
258.
F.G. Shi, T.G. Nieh, and Y.T. Chou, ‘A Free Volume Approach for Self-Diffusion in Metals,’
Scripta Mater. 43(3), 265–267 (2000).
259.
P. Asoka-Kumar, J. Hartley, R. Howell, P.A. Sterne, and T.G. Nieh, ‘Chemical Ordering around Open-Volume Regions in Bulk Metallic Glass Zr
52.5
Ti
5
Al
10
Cu
17.9
Ni
14.6
,’
Appl. Phys.
Lett.
, 77(13), 1973–1975 (2000).
260.
Jinguo Wang, H.K. Kim, Frank G. Shi, Bin Zhao, and T.G. Nieh, ‘Thickness Dependence of
Morphology and Mechanical Properties of on-Wafer Low-k PTFE Dielectric Films,’ Thin Solid
Films , 377, 413–417 (2000).
261.
T.G. Nieh, J.G. Wang, and C.T. Liu, ‘Deformation of a Multiphase Mo-9.4Si-13.8B Alloy at
Elevated Temperatures,’ Intermetallics , 9(1), 73–79 (2001).
262.
T.G. Nieh, B.W. Choi, and A. Jankowski, ‘Processing and Characterizing Porous
Hydroxyapatite Bulk and Coatings,’ in
Structural Biomaterials for the 21 st Century, pp.
203–212, edited by H. Rack, D.R. Lesuer, and E.M. Taleff, The Minerals, Metals, and
Materials Society, Warrendale, PA, 2001.

263.
T.G. Nieh, J. Wadsworth, C.T. Liu, G.E. Ice, and K.-S. Chung, ‘Extended Plasticity in the
Supercooled Liquid Region of Bulk Metallic Glasses,’ Mater. Trans. JIM , 42(4), 613–618
(2001).
264.
J. Dutkiewicz, J. Kunierz, and T.G. Nieh, ‘Development of Superplastic AlCuAgMgZr Alloys for Easy Forming,’ Mater. Sci. Forum , 357-359, 111–116 (2001).
265.
S. Namilae, C. Shet, N. Chandra, and T.G. Nieh, ‘Atomistic Simulation of the Effect of Trace
Elements on Grain Boundary of Aluminum,’ Mater. Sci. Forum , 357-359, 387–392 (2001).
266.
T.G. Nieh and J. Wadsworth, ‘High Strength Freestanding Metal-Amorphous Multilayer,’
Scripta Mater.
44 (8-9), 1825–1830 (2001).
267.
R. Kaibyshev, I. Kazakulov, D. Gromov, F. Musin, D.R. Lesuer, and T.G. Nieh,
‘Superplasticity in a 2219 Aluminum Alloy,’ Scripta Mater. 44(10), 2411–2417 (2001).
268.
W.J. Zhang, G.L. Chen, F. Appel, T.G. Nieh, and S.C. Deeve, ‘A Preliminary Study on the
Creep Behavior of a Ti–45Al–10Nb Alloy,’ Mater. Sci. Eng. A , 315(1-2), 250–253 (2001).
269.
J. Wang, L.M. Hsiung, T.G. Nieh, and M. Mabuchi, ‘Creep of a Heat-Treated Mg–4Y–3RE
Alloy,’ Mater. Sci. Eng. A , 315(1-2), 81-88 (2001).
270.
T.G. Nieh, J. Wadsworth, C.T. Liu, Y. Ohkubo, and Y. Hirotsu, ‘Plasticity and Structure
Instability in a Bulk Metallic Glass Deformed in the Supercooled Liquid Region,’ Acta Mater.
49(15) 2887–2896 (2001).
271.
P.A. Sterne, P. Asoka-Kumar, J.H. Hartley, R.H. Howell, T.G. Nieh, K.M. Flores, D. Suh, and
R.H. Dauskardt, ‘Short Range Chemical Ordering in Bulk Metallic Glasses,’ MRS Symp. No.
644, Supercooled Liquid, Bulk Glassy and Nanocrystalline States of Alloys , pp. L1.3.1-L1.3.6, edited by R.H. Dauskardt, W.L. Johnson, A. Inoue, Materials Research Society, Pittsburgh, PA,
2001.
272.
T.G. Nieh, A.F. Jankowski, and J. Koike, ‘Processing and Characterizing Hydroxyapatite
Coatings on Titanium Produced by Magnetron Sputtering,’ J. Mater. Res.
, 16(11), 3238-3245
(2001).
273.
T.G. Nieh, ‘High Strain Rate, Superplastic Metal Forming,’ Assembly Autom.
, 21(4), 287-288
(2001).
274.
J. Dutkiewicz, P. Malczewski, J. Kusnierz and T.G. Nieh, ‘Determination of Superplastic
Properties of AlCuAgMgZr Alloys Prepared from Various Techniques,’ in LIMAT-2001 , pp.
387-392, edited by Nack J. Kim, C.S. Lee and D. Eylon, Center of Advanced Materials Pohang
University of Science and Technology, Pohang, Korea, 2001.
275.
T. Mukai, T.G. Nieh, Y. Kawamura, A. Inoue, and K. Higashi, ‘Dynamic Response of a
Pd40Ni40P20 Bulk Metallic Glass in Tension,’ Scripta Mater.
46(1), 43-47 (2002).
276.
S. Namilae, N. Chandra, and T.G. Nieh, ‘Atomic Simulation of Grain Boundary Sliding in Pure and Magnesium Doped Aluminum Bicrystals,’ Scripta Mater . 46(1), 49-54 (2002).
277.
C. Schuh, T. G. Nieh, and T. Yamasaki, ‘Hall-Petch Breakdown Manifested in Abrasive Wear
Resistance of Nanocrystalline Nickel,’
Scripta Mater . 46, 735-740 (2002).
278.
C.A. Schuh and T.G. Nieh, and Y. Kawamura, ‘Rate Dependence of Serrated Flow during
Nanoindentation of a Bulk Metallic Glass, ’ J. Mater. Res . 17(7), 1651-1654 (2002).
279.
L.M. Hsiung, T.G. Nieh, B.W. Choi, and J. Wadsworth, ‘Interfacial Dislocations and
Deformation Twinning in Fully Lamellar TiAl,’
Mater. Sci. Eng , A329-331, 637-643 (2002).
280.
T.G. Nieh, ‘Deformation of Metallic Glasses with a Special Emphasis in the Supercooled
Liquid Region,’ Trans. Nonferrous Met. China , 12(4), 726-733 (2002).
281.
P. Asoka-Kumar, R. Howell, T.G. Nieh, P.A. Sterne, B.D. Wirth, R.H. Dauskardt, K.M. Flores,
D. Suh, and G.R. Odette, “Opportunities for materials characterization using high energy positron beams”, App. Surf. Sci., 194, 160-167 (2002).
282.
R. Kaibyshev, F. Musin, D. Gromov, T.G. Nieh, and D.R. Lesuer, ‘Effect of liquid phase on superplastic behavior of a modified 6061 aluminum alloy,’ Scripta Mater.
47(9), 569-575
(2002).
283.
A.F. Jankowski, M.A. Wall, A.W. Van Buuren T.G. Nieh, and J. Wadsworth, ‘From
Nanocrystalline to Amorphous Structure in Beryllium-Based Coatings,’ Acta Mater.
50(19),
4791-4800, 2002.
284.
R. Kaibyshev, F. Musin, D. Gromov, T.G. Nieh, and D.R. Lesuer, ‘Effect of Cu and Zr
Additions on Superplastic Behavior of 6061 Aluminum Alloy,’ Mater. Trans. JIM , 43(10),
2392-2399 (2002).
285.
H. Kanahashi, T. Mukai, T.G. Nieh, T. Aizawa, and K. Higashi, ‘Effect of Cell Size on the
Dynamic Compressive Properties of Open–Celled Aluminum Foams,’ Mater. Trans. JIM.
43(10), 2548-2553 (2002).

286.
T.G. Nieh, C.A. Schuh, J. Wadsworth, and Y. Li, ‘Strain Rate-Dependent Deformation in Bulk
Metallic Glasses,’
J. Intermetallics . 10(11-12), 1177-1182 (2002).
287.
T. Mukai, T.G. Nieh, Y. Kawamura, A. Inoue, and K. Higashi, ‘Influence of Strain Rate on
Compressive Mechanical Behavior of Pd40Ni40P20 Bulk Metallic Glass,’ J. Intermetallics ,
10(11-12), 1071-1077 (2002).
288.
J.P. Chu, C.L. Chiang, T.G. Nieh, and Y. Kawamura, ‘Superplasticity in a Bulk Amorphous
Pd-40Ni-20P Alloy: A Compression Study,’ J. Intermetallics , 10(11-12), 1191-1195 (2002).
289.
W. Kai, H.H. Hsieh, T.G. Nieh, and Y. Kawamura, ‘Oxidation Behavior of a Zr-Cu-Al-Ni
Amorphous Alloy in Air at 300-425°C, ’ J. Intermetallics , 10(11-12), 1265-1270 (2002).
290.
R. Kaibyshev, F. Musin, D.R. Lesuer, and T.G. Nieh, ‘Superplastic Behavior of an Al-Mg
Alloy at Elevated Temperatures,’ Mater. Sci. Eng . A, 342(1-2), 169-177 (2003).
291.
C. A. Schuh and T. G. Nieh, ‘A Nanoindentation Study of Serrated Flow in Bulk Metallic
Glasses, ’ Acta Mater . 51(1), 87-99 (2003).
292.
C.A. Schuh, T.G. Nieh, and H. Iwasaki, ‘The Effect of Solid Solution W Additions on the
Mechanical Properties of Nanocrystalline Ni, ’ Acta Mater . 51(2), 432-443 (2003).
293.
A.F. Jankowski, M.A. Wall, and T.G. Nieh, ‘Crystallization of Beryllium-Boron Metallic
Glasses, ’ Non-crystalline Solids . 317, 129-136 (2003).
294.
R. Kaibyshev, F. Musin, D. Gromov, T.G. Nieh, and D. R. Lesuer, ‘Grain Refinement and
Superplastic Behaviour of a Modified 6061 Aluminum Alloy,’ Mater. Sci. Technol.
19(4),
483-490 (2003).
295.
I. Nieves, F. Arceo, T.G. Nieh, and J.C. Earthman, ‘Tensile Behavior of Open-Cellular Al
Foams at Ambient and Intermediate Temperatures,’ in
Hot Deformation of Aluminum Alloys III , pp. 473-481, edited by Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan, The Minerals,
Metals, and Materials Society, Warrendale, PA, 2003.
296.
C.A. Schuh and T.G. Nieh, ‘Hardness and Abrasion Resistance of Nanocrystalline Nickel
Alloys near the Hall-Petch Breakdown Regime,’ in MRS Symp. no. 740, Nanomaterials for
Stutuctural Applications , pp. I1.8.1-I1.8.6, edited by C. Berndt, T.E. Fischer, I. Ovid∂ko, G.
Skandan, and T. Tsakalakos, Materials Research Society, Pittsburgh, PA, 2003.
297.
H. Iwasaki, K. Higashi, and T.G. Nieh, ‘Effect of Solid-Solution W Addition on the
Nanostructure of Electrodeposited Ni,’ in MRS Symp. no. 740, Nanomaterials for Stutuctural
Applications , pp. I3.28.1-I3.28.6, edited by C. Berndt, T.E. Fischer, I. Ovid∂ko, G. Skandan, and T. Tsakalakos, Materials Research Society, Pittsburgh, PA, 2003.
298.
T.G. Nieh and H. Iwasaki, ‘Deformation and strength of alloys with nanocrystalline grains,’ in
Proceedings of Iwasaki Workshop on Superplasticity , pp. 71-88, edited by H. Iwasaki, Work-1
Co., Ltd, Sagamihara, Japan, 2003.
299.
J.P. Chu, C.L. Chiang, T. Mahalingam, and T.G. Nieh, ‘Plastic Flow and Tensile Ductility of a
Bulk Amorphous Zr
55
Al
10
Cu
30
Ni
5
Alloy at 700K,’ Scripta Mater. 49(5), 435-440 (2003).
300.
C.A. Schuh, A.S. Argon, T.G. Nieh, and J. Wadsworth, ‘The Transition from Localized to
Homogeneous Plasticity during Nanoindentation of an Amorphous Metal, ’ Phil. Mag. A .
83(22), 2585-2597 (2003).
301.
H Iwasaki, K Higashi, and T.G. Nieh, ‘Tensile deformation and microstructure of a nanocrystalline Ni-W alloy produced by electrodeposition,’ Scripta Mater , 50(3), 395-399
(2003).
302.
A.C. Lund, T.G. Nieh, and C.A. Schuh, ‘Tension/compression strength asymmetry in a simulated nanocrystalline metal,’ Phys. Rev. B 69, 012121-1-4 (2004).
303.
C.A. Schuh and T.G. Nieh, ‘A Survey of Instrumented Indentation Studies on Metallic Glasses, ’
J. Mater. Res.
19(1), 46-57 (2004).
304.
V.N. Chuvil’deev, T.G. Nieh, M.Yu. Gryaznov, A.N. Sysoev, V.I. Kopylov, ‘Low-temperature superplasticity and internal friction in microcrystalline Mg alloys processed by ECAP,’ Scripta
Mater . 50(6), 861-865 (2004).
305.
L.M. Hsiung and T.G. Nieh, ‘Microstructures and properties of powder metallurgy TiAl alloys,’
Mater. Sci. Eng.
A364, 1-10 (2004).
306.
M.-J. Caturla, T.G. Nieh, and J.S. Stölken, ‘Modeling the effect of texture on the deformation mechanisms of nanocrystalline materials at the atomic scale,’
App. Phys. Lett. 84 (4), 598-600
(2004).
307.
R. Kaibyshev, I. Kazakulov, D. Gromov, D.R. Lesuer, and T.G. Nieh, ‘Superplastic blow forming of 2219 aluminum alloy,’ Mater. Sci Forum 447-448, 265-270 (2004).
308.
Y. Xun, M.J. Tan, and T.G. Nieh, ‘Grain boundary characterization in superplastic deformation of Al-Li alloy using electron backscatter diffraction,’ Mater. Sci Technol.
20(2), 173-180
(2004).

309.
C.A. Schuh and T.G. Nieh, ‘Chapter 36 - Superplasticity,’ in Smithell Metals Reference Book,
8 th Edition , pp. 36-1 to 36-20, edited by W.F. Gale and T.C. Totemeier, Elsevier
Butterworh-Heinemann, Oxford, 2004.
310.
H. Somekawa, T.G. Nieh, and K. Higashi, ‘Instrumented indentation of electrodeposited Ni-W alloys with different microstructures,’ Scripta Mater . 50(11), 1361-1365 (2004).
311.
P. Wesseling, T.G. Nieh, W.H. Wang, and J.J. Lewandowski, ‘Preliminary assessment of flow, notch toughness, and high temperature behavior of Cu
60
Zr
20
Hf
10
Ti
10
bulk metallic glass,’
Scripta Mater 51(2), 151-154 .
(2004)
312.
A.M. Hodge, L.M. Hsiung, and T.G. Nieh, ‘Creep of nearly lamellar TiAl alloy containing W,’
Scripta Mater . 51(5), 411–415 (2004).
313.
A. M. Hodge and T. G. Nieh, ‘Evaluating abrasive wear of amorphous alloys using nanoscratch technique,’ Intermetallics 12, 741–748 (2004).
314.
L. M. Hsiung, A. J. Schwarz, and T. G. Nieh, ‘ In situ TEM observation of interface sliding and migration in a refined lamellar TiAl alloy,’ Intermetallics 12, 727–732 (2004).
315.
Y. M. Wang, S. Cheng, Q. M. Wei, E. Ma, T. G. Nieh, and A. Hamza, ‘Effects of annealing and impurities on tensile properties of electrodeposited nanocrystalline Ni,’ Scripta Mater .
51(11), 1023-1028 (2004).
316.
C. L. Chiang, J. P. Chu, C. T. Lo, Z. X. Wang, W. H. Wang, J. G. Wang, and T. G. Nieh,
‘Homogeneous plastic deformation in bulk amorphous Cu
60
Zr
20
Hf
10
Ti
10 alloy,’ Intermetallic , 12,
1057-1061 (2004)
317.
T. G. Nieh, C. Iwamoto, Y. Ikuhara, K. W. Lee, Y. W. Chung, ‘Comparative studies of crystallization of a bulk Zr-Al-Ti-Cu-Ni amorphous alloy,’ Intermetallics , 12, 1083-1089
(2004)
318.
Y. Hirotsu, T. Hanada, T. Ohkubo, A. Makino, Y. Yoshizawa, and T. G. Nieh, ‘Nanoscale phase separation in metallic glasses studied by advanced electron microscopy Techniques,’
Intermetallics , 12, 1081-1088 (2004)
319.
H. H. Hsieh, W. Kai, R. T. Huang, M. X. Pan, and T. G. Nieh, ‘Effects of Zr-content on the oxidation and phase transformation of Zr-base amorphous alloys in air,’ Intermetallics , 12,
1089-1096 (2004)
320.
C.A. Schuh, A.C. Lund, and T.G. Nieh, ‘New regime of homogeneous flow in the deformation map of metallic glasses: elevated temperature nanoindentation experiments and mechanistic modeling,’ Acta Mater . 52(20) 5879-5891 (2004).
321.
V. Chuvil'deev, T.G. Nieh, M. Gryaznov, V.I. Kopylov, and A.N. Sysoev, ‘Superplasticity and internal friction in microcrystalline AZ91 and ZK60 magnesium alloys processed by equal-channel angular pressing,’ J. Alloys Compounds 378, 253-257 (2004).
322.
G.Q. Ton, K.C. Chan, T.G. Nieh, ‘Superplastic bulging of an Al-Mg-03Sc alloy and its forming limits,’ Mater. Sci. Forum , 471-472, 385-389 (2004).
323.
T.G. Nieh and J.G. Wang, ‘Hall-Petch relationship in nanocrystalline Ni and Be-B alloys,’
Intermetallics 13(4) 377–385 (2005).
324.
Y.M. Wang, A.M. Hodge, J. Biener, A.V. Hamza, D. Barnes, K. Liu, and T.G. Nieh,
‘Deformation twinning during nanoindentation of nanocrystalline Ta,’ Appl. Phy. Lett.
86,
101915-101917 (2005).
325.
A. Jankowski, M.A. Wall, and T.G. Nieh, ‘Thermal stability of amorphous Be-B-X alloy coatings,’ J. Non-Crys. Solid . 351, 900-905 (2005).
326.
T. H. Hung, Y. C. Chang, H. M. Chen, Y. L. Tsai, J. C. Huang*, J. S. C. Jang, and T. G. Nieh,
“Thermal and Mechanical Properties of Mg-Cu(Ni)-Gd(Y)-B(Si) Amorphous Alloys”, Mater.
Sci. Forum, vol. 539-543, 2007, pp. 1926-1931.
327.
Y. C. Chang, T. H. Hung, H. M. Chen, J. C. Huang*, T. G. Nieh, and C. J. Lee, “Viscous Flow
Behavior and Thermal Properties of Bulk Amorphous Mg
58
Cu
31
Y
11
Alloy”, Intermetallics, vol.
15, 2007, pp. 1303-1308.
328.
C. J. Lee, J. C. Huang*, and T. G. Nieh, “Sample Size Effect on the Mechanical Behavior of
Mg
65
Cu
25
Gd
10
Metallic Glass”, Appl. Phys. Lett., vol. 91, 2007, p. 161913 (1-3).
329.
Y. H. Lai, C. J. Lee, Y. T. Cheng, H. M. Chen, H. S. Chou, X. H. Du, C. I. Chang, J. C. Huang*,
S. R. Jain, J. S. C. Jang, and T. G. Nieh, “Bulk and Microscale Compressive Properties of
Zr-Based Metallic Glass”, Scripta Mater. vol. 58, 2008, pp. 890-893.
330.
Y. C. Chang, J. C. Huang*, Y. T. Cheng, C. J. Lee, X. H. Du, and T. G. Nieh, “Effect of Silver or Boron on Viscosity and Thermomechanical Properties in Mg-Cu-Gd Metallic Glasses”, J.
Appl. Phys., vol. 103, 2008, pp. 103521 (1-6).
331.
Y. C. Chang, J. C. Huang*, C. W. Tang, C. I. Chang, and T. G. Nieh, “Viscous Flow Behavior and Workability of Mg-Cu-(Ag)-Gd Based Bulk Metallic Glasses”, Mater. Trans (JIM), vol. 49,

2008, pp. 2605-2610.
332.
H. S. Chou, J. C. Huang*, L. W. Chang, and T. G. Nieh, “Structural Relaxation and
Nanoindentation Response in Zr-Cu-Ti Amorphous Thin Films”, Appl. Phys. Lett., vol. 93,
2008, p. 191901 (1-3).
333.
S. X. Song, Y. H. Lai, J. C. Huang, and T. G. Nieh, “Homogeneous Deformation of Au-Based
Metallic Glass Micro-Pillars in Compression at Elevated Temperatures”, Appl. Phys. Lett., vol.
94, 2009, pp. 061911 (1-3).
334.
H. M. Chen, X. H. Du, J. C. Huang*, J. S. C. Jang, and T. G. Nieh, “Compression Straining to
Various Stages of Zr-Based Bulk Metallic Glasses”, Intermetallics, vol. 17, 2009, pp. 330-335.
335.
H. M. Chen, S. X. Song, J. C. Huang*, H. S. Chou, J. S. C. Jang, and T. G. Nieh, “Flow
Serration and Shear Band Propagation in Bulk Metallic Glasses”, Appl. Phys. Lett., vol. 94,
2009, pp. 141914 (1-3).
336.
M. C. Liu, J. C. Huang*, H. S. Chou, Y. H. Lai, and T. G. Nieh, “Design Nanometer-Scaled
Amorphous Film with Extraordinarily Large Plasticity”, Scripta Mater., vol. 61, 2009, pp.
840-843.
337.
C. J. Chen, J. C. Huang*, Y. H. Lai, H. S. Chou, L. W. Chang, X. H. Du, J. P. Chu, and T. G.
Nieh, “On the Amorphous and Nanocrystalline Zr-Cu and Zr-Ti Sputtered Thin Films”, J.
Alloys Compounds, vol. 483, 2009, pp. 337-340.
338.
H. S. Chou, J. C. Huang*, Y. H. Lai, L. W. Chang, X. H. Du, J. P. Chu, and T. G. Nieh,
“Amorphous and Nanocrystalline Sputtered Mg-Cu Thin Films”, J. Alloys Compounds, vol.
483, 2009, pp. 341-345.
339.
C. L. Wang, Y. H. Lai, J. C. Huang, and T. G. Nieh, “Creep of Nanocrystalline Nickel: a Direct
Comparison between Uniaxial and Nanoindention Creep”, Scripta Mater., vol. 62, 2010, pp.
175-178.
340.
J. S. C. Jang, J. Y. Ciou, T. H. Li, J. C. Huang, and T. G. Nieh, “Dispersion Toughening of
Mg-based Bulk Metallic Glass Reinforced with Porous Mo Particles”, Intermetallics, 2010 (on line).
341.
J. S. C. Jang, D. J. Pan, S. R. Jian, Y. H. Wu, J. C. Huang, and T. G. Nieh, “Thermal and
Mechanical Characterizations of A Zr-Based Bulk Metallic Glass Composite Toughened by
In-situ Precipitated Ta-Rich Particles”, Intermetallics, 2010 (on line).
342.
S. X. Song, J. S. C. Jang, J. C. Huang, and T. G. Nieh, “Inhomogeneous to Homogeneous
Transition in an Au-Based Metallic Glass and Its Deformation Maps”, Intermetallics, 2010 (on line).
343.
J. S. C. Jang, W. J. Li, T. H. Li, S. R. Jian, J. C. Huang, and T. G. Nieh, “Thermal Plastic
Forming Ability of Mg-Base Bulk Metallic Glass Composites Reinforced with Porous Mo
Particles”, Intermetallics, 2010 (on line).