CURRICULUM VITAE
(Preparation Date: January 20, 2016)
1.
2.
3.
Name, Surname:
Date of Birth :
Title
:
Address
:
Telephone
Mobile phone
Fax
E-mail
Web
4.
:
:
:
:
:
Murat UZAM
May 1, 1968
Prof. Dr.
Melikşah Üniversitesi,
Mühendislik-Mimarlık Fakültesi,
Elektrik-Elektronik Mühendisliği Bölümü,
38280 Talas / Kayseri, TÜRKİYE
+ 90 352 207 73 00 / extension 7351
+ 90 538 287 24 66
+ 90 352 207 73 49
murat_uzam@hotmail.com murat_uzam@meliksah.edu.tr
http://www.meliksah.edu.tr/muzam/
Education
Degree
Department
University
Year
BSc
Electrical Engineering
Yıldız University
1989
MSc
Electrical Engineering
Yıldız University
1991
PhD
Electrical Engineering
University of Salford, UK
1998
The title and the supervisor of the MSc Thesis :
The Design of PLCs and Their Application to Control Systems, Yıldız University, Turkey 1991
Supervisor: Prof. Dr. Galip CANSEVER
The title and the supervisor of the PhD Thesis:
Petri-Net-Based Supervisory Control of Discrete Event Systems and Their Ladder Logic
Diagram Implementations, The University of Salford, UK, 1998
Supervisor: Dr. A.H. JONES
5. Employment :
Dates
Title
Organisation
1990 - 1993
Research Assistant
Yıldız University, Engineering Faculty, Electrical Engineering
Department
1993 - 1998
Research Assistant
Nigde University, Faculty of Engineering and Architecture,
Electrical and Electronics Engineering Department
1998 - 1999
Research Assist. Dr.
Nigde University, Faculty of Engineering and Architecture,
Electrical and Electronics Engineering Department
1 / 15
1999 - 2004
Assist. Prof. Dr.
Nigde University, Faculty of Engineering and Architecture,
Electrical and Electronics Engineering Department
2004 - 2009
Assoc. Prof. Dr.
Nigde University, Faculty of Engineering and Architecture,
Electrical and Electronics Engineering Department
2009 - 2010
Prof. Dr.
Nigde University, Faculty of Engineering and Architecture,
Electrical and Electronics Engineering Department
2011-
Prof. Dr.
Meliksah University, Faculty of Engineering and Architecture,
Electrical and Electronics Engineering Department
6. Supervised MSc and PhD Thesis :
6.1. Supervised MSc Thesis
1. Halil Fikret TURGUTLU, The Control of an Experimental Manufacturing System by
means of a PIC Microcontroller, Nigde University, Graduate School of Natural and
Applied Sciences, Electrical and Electronics Engineering Department, MSc Thesis,
February 2002.
2.Mehmet TAŞTAN, The Control of an Experimental Manufacturing System by means of a
SIEMENS S7-200 CPU 214 Programmable Logic Controller, Nigde University, Graduate
School of Natural and Applied Sciences, Electrical and Electronics Engineering
Department, March 2002.
3. Recep TAPU, SCADA Systems and Their Applications, Nigde University, Graduate
School of Natural and Applied Sciences, Electrical and Electronics Engineering
Department, April 2002.
4. M. Kürşat YALÇIN, A Mobile Robot Application, Nigde University, Graduate School of
Natural and Applied Sciences, Electrical and Electronics Engineering Department, June
2003.
5. İ. Burak KOÇ, The Modeling of an Industrial System by means of Petri Nets and Its
Implementation Using a Xilinx XC2S200 FPGA, Nigde University, Graduate School of
Natural and Applied Sciences, Electrical and Electronics Engineering Department, July
2005.
6. B. Hakan AKSEBZECİ, The Modeling of an Elevator System by means of Petri Nets and
Its Implementation Using a Xilinx XC2S200E FPGA, Nigde University, Graduate School
of Natural and Applied Sciences, Electrical and Electronics Engineering Department, July
2005.
7. Gökhan GELEN, The Implementation of Extended Petri Nets Using a Xilinx XC2S200
FPGA, Nigde University, Graduate School of Natural and Applied Sciences, Electrical and
Electronics Engineering Department, July 2006.
8. Çağlar TATYÜZ, The Implementation of Automation Petri Nets by Using PARSIC Visual
Programming Environment and PIC Microcontrollers, Nigde University, Graduate School
of Natural and Applied Sciences, Electrical and Electronics Engineering Department, July
2006.
9. Şükrü KİTİŞ, The Design and Implementation of a Programmable Logic Controller by
means of a PIC 16F84 Microcontroller, Nigde University, Graduate School of Natural and
Applied Sciences, Electrical and Electronics Engineering Department, August 2007.
2 / 15
10. Yılmaz DURNA, A Microcontroller and RF Based Control Application, Nigde
University, Graduate School of Natural and Applied Sciences, Electrical and Electronics
Engineering Department, August 2007.
11. Erhan DİNÇER, A Distributed Control Application with CAN Bus, Nigde University,
Graduate School of Natural and Applied Sciences, Electrical and Electronics Engineering
Department, February 2010.
12. Recep DALCI, A General Methodology to Convert a Ramadge-Wonham Type Supervisor
into PLC Code, Nigde University, Graduate School of Natural and Applied Sciences,
Electrical and Electronics Engineering Department, June 2010.
13. Arif HARMANDA, Design and Application of a Programmable Logic Controller with a
16 Bit PIC Microcontroller, Nigde University, Graduate School of Natural and Applied
Sciences, Electrical and Electronics Engineering Department, October 2011.
14. Emin Arif BİRCAN, The Design and Implementation of a Flexible Domestic Illumination
System, Melikşah University, The Graduate Institute of Science and Engineering,
Electrical and Computer Engineering Department, Master’s Thesis, October 2013.
15. Muhammad BASHIR, A Study on the Structural Complexity Reduction of Petri Net
Based Liveness Enforcing Supervisors in Flexible Manufacturing Systems, Melikşah
University, The Graduate Institute of Science and Engineering, Electrical and Computer
Engineering Department, Master’s Thesis, June 2014.
16. Rabiu Saleh ZAKARIYYA, A Petri Net Based Divide and Conquer Method for the
Synthesis of Liveness Enforcing Supervisors in FMS, Melikşah University, The Graduate
Institute of Science and Engineering, Electrical and Computer Engineering Department,
Master’s Thesis, June 2014.
17. Sunusi Garba MOHAMMED, A Study on the Computational Complexity Reduction of
Petri Net Based Liveness Enforcing Supervisors in Flexible Manufacturing Systems,
Melikşah University, The Graduate Institute of Science and Engineering, Electrical and
Computer Engineering Department, Master’s Thesis, June 2014.
18. Tahir Lawan SALEH, A Near-Optimal Approach for the Synthesis of Petri Net Based
Liveness Enforcing Supervisors in Flexible Manufacturing Systems, Melikşah University,
The Graduate Institute of Science and Engineering, Electrical and Computer Engineering
Department, Master’s Thesis, June 2014.
19. Umar Suleiman ABUBAKAR, A General Approach for the Synthesis of Petri Net Based
Liveness Enforcing Supervisors in Flexible Manufacturing Systems, Melikşah University,
The Graduate Institute of Science and Engineering, Electrical and Computer Engineering
Department, Master’s Thesis, July 2014.
6.2. Supervised PhD Thesis
1.
Gökhan GELEN, New Hybrid Methods Based on Petri Nets and Ramadge-Wonham
Methods for the Synthesis of Controllers for Discrete Event Systems and Their Application
to Manufacturing Systems, Nigde University, Graduate School of Natural and Applied
Sciences, Electrical and Electronics Engineering Department, PhD Thesis, 2010.
3 / 15
7. Publications
7.1. International Journal and Magazine Papers indexed by Science Citation Index
Expanded
A1. M. Uzam and A.H. Jones, “Discrete Event Control System Design Using Automation Petri
Nets and Their Ladder Diagram Implementation,” International Journal of Advanced
Manufacturing Technology, October 1998, vol. 14, no. 10, pp. 716-728.
A2. M. Uzam, A.H. Jones and İ. Yücel, “Using a Petri-Net-Based Approach for the Real-Time
Control of an Experimental Manufacturing System,” International Journal of Advanced
Manufacturing Technology, 2000, vol.16, pp. 498-515.
A3. M. Uzam, “An Optimal Deadlock Prevention Policy for Flexible Manufacturing Systems
Using Petri Net Models with Resources and the Theory of Regions,” International Journal of
Advanced Manufacturing Technology, 2002, vol. 19, pp. 192-208.
A4. M. Uzam, “The Use of Petri Net Reduction Approach for an Optimal Deadlock Prevention
Policy for Flexible Manufacturing Systems,” International Journal of Advanced
Manufacturing Technology, February 2004, vol. 23, numbers 3-4, pp. 204-219.
A5. M. Uzam, “Synthesis of Feedback Control Elements for Discrete Event Systems Using
Petri Net Models and Theory of Regions,” International Journal of Advanced Manufacturing
Technology, 2004, vol. 24, numbers 1-2, pp. 48-69.
A6. M. Uzam, and W.M. Wonham, "Comments on “Feedback Control Logic for ForbiddenState Problems of Marked Graphs: Application to a Real Manufacturing System”," IEEE
Transactions on Automatic Control, 2004, vol. 49, no. 7, pp. 1216-1217.
A7. Z. Li, M. Uzam and M. C. Zhou, “Comments on “Deadlock Prevention Policy Based on
Petri Nets and Siphons”, ” International Journal of Production Research, vol. 42, no. 24, pp.
5253-5254, 15 December 2004.
A8. B. Karlık, M. Uzam, M. Cinsdikici and A. H. Jones, “Neurovision-Based Logic Control of
an Experimental Manufacturing Plant Using Convolutional Neural Net Le-Net5 and
Automation Petri Nets,” Journal of Intelligent Manufacturing, vol. 16, Numbers 4-5, pp. 527548, 2005.
A9. M. Uzam and W.M. Wonham, “A Hybrid Approach to Supervisory Control of Discrete
Event Systems Coupling RW Supervisors to Petri Nets,” International Journal of Advanced
Manufacturing Technology, vol. 28, numbers 7-8, pp. 747-760, 2006.
A10. M. Uzam and M. C. Zhou, “An Improved Iterative Synthesis Method for Liveness
Enforcing Supervisors of Flexible Manufacturing Systems,” International Journal of
Production Research, vol. 44, No. 10, pp. 1987-2030, 15 May 2006.
A11. M. Uzam, “General Purpose, Cheap and Flexible Contact Debouncer,” Electronics
World, December 2006, Volume 112, Issue 1848, pp. 41-48.
A12. M. Uzam and M. C. Zhou, “An Iterative Synthesis Approach to Petri Net Based Deadlock
Prevention Policy for Flexible Manufacturing Systems,” IEEE Transactions on Systems, Man
and Cybernetics - Part A: Systems and Humans, Vol. 37, No. 3, pp. 362-371, 2007.
A13. Z.W. Li, M. C. Zhou and M. Uzam, “Deadlock Control Policy for a Class of Petri Nets
Without Complete Siphon Enumeration,” IET Control Theory & Applications (Formerly IEE
Proceedings - Control Theory and Applications), Vol. 1, No. 6, pp. 1594-1605, 2007
A14. M. Uzam, Z.W. Li, and M. C. Zhou, “Identification and Elimination of Redundant
Control Places in Petri Net Based Liveness Enforcing Supervisors of FMS,” International
Journal of Advanced Manufacturing Technology, vol. 35, numbers 1-2, pp. 150-168, 2007.
A15. Z.W. Li, M. Uzam, and M. C. Zhou, “Deadlock Control of Concurrent Manufacturing
Processes Sharing Finite Resources,” International Journal of Advanced Manufacturing
Technology, vol. 38, numbers 7-8, pp. 787-800, 2008.
4 / 15
A16. M. Uzam, “PLC with PIC16F648A Microcontroller (Part 1),” Electronics World, Volume
114, Issue 1871, November 2008, pp. 21-25.
A17. M. Uzam, “PLC with PIC16F648A Microcontroller Part 2,” Electronics World, Volume
114, Issue 1872, December 2008, pp. 29-35.
A18. M. Uzam, İ. B. Koç, G. Gelen, ve B. H. Aksebzeci, “Asynchronous Implementation of
Discrete Event Controllers Based on Safe Automation Petri Nets”, International Journal of
Advanced Manufacturing Technology, vol. 41, numbers 5-6, pp. 595-612, 2009.
A19. M. Uzam and G. Gelen, “The Real-Time Supervisory Control of an Experimental
Manufacturing System Based on a Hybrid Method,” vol. 17, issue 10, pp. 1174-1189, 2009.
A20. M. Uzam, “PLC with PIC16F648A Microcontroller Part 3,” Electronics World, Volume
115, Issue 1873, pp. 30-34, January 2009.
A21. M. Uzam, “PLC with PIC16F648A Microcontroller Part 4,” Electronics World, Volume
115, Issue 1874, pp. 34-40, February 2009.
A22. M. Uzam, “PLC with PIC16F648A Microcontroller - Part 5,” Electronics World, Volume
115, Issue 1875, pp. 30-33, March 2009.
A23. M. Uzam, “PLC with PIC16F648A Microcontroller - Part 6,” Electronics World, Volume
115, Issue 1876, pp. 26-30, April 2009.
A24. M. Uzam, “PLC with PIC16F648A Microcontroller - Part 7,” Electronics World, Volume
115, Issue 1877, pp. 30-32, May 2009.
A25. M. Uzam, “PLC with PIC16F648A Microcontroller - Part 8,” Electronics World, Volume
115, Issue 1878, pp. 30-32, June 2009.
A26. M. Uzam, “PLC with PIC16F648A Microcontroller - Part 9,” Electronics World, Volume
115, Issue 1879, pp. 29-34, July 2009.
A27. M. Uzam, “PLC with PIC16F648A Microcontroller-Part 10,” Electronics World, Volume
115, Issue 1880, pp. 29-34, August 2009.
A28. M. Uzam, “PLC with PIC16F648A Microcontroller-Part 11,” Electronics World, Volume
115, Issue 1881, pp. 38-42, September 2009.
A29. M. Uzam, “PLC with PIC16F648A Microcontroller-Part 12,” Electronics World, Volume
115, Issue 1882, pp. 36-41, October 2009.
A30. M. Uzam, “PLC with PIC16F648A Microcontroller-Part 13,” Electronics World, Volume
115, Issue 1883, pp. 42-44, November 2009.
A31. M. Uzam, “PLC with PIC16F648A Microcontroller-Part 14,” Electronics World, Volume
115, Issue 1884, pp. 40-42, December 2009.
A32. M. Uzam, “PLC with PIC16F648A Microcontroller-Part 15,” Electronics World, Volume
116, Issue 1885, pp. 35-39, January 2010.
A33. M. Uzam, “PLC with PIC16F648A Microcontroller Part 16,” Electronics World, Volume
116, Issue 1886, pp. 41-42, February 2010.
A34. M. Uzam, “PLC with PIC16F648A Microcontroller Part 17,” Electronics World, Volume
116, Issue 1887, pp. 41-43, March 2010.
A35. M. Uzam, “PLC with PIC16F648A Microcontroller Part 18,” Electronics World, Volume
116, Issue 1888, pp. 41-43, April 2010.
A36. M. Uzam, “PLC with PIC16F648A Microcontroller Part 19,” Electronics World, Volume
116, Issue 1889, pp. 39-43, May 2010.
A37. M. Uzam, “PLC with PIC16F648A Microcontroller Part 20,” Electronics World, Volume
116, Issue 1890, pp. 38, 40, June 2010.
A38. M. Uzam, “PLC with PIC16F648A Microcontroller Part 21,” Electronics World, Volume
116, Issue 1891, pp. 40-41, July 2010.
A39. M. Uzam, “PLC with PIC16F648A Microcontroller Part 22,” Electronics World, Volume
116, Issue 1892, pp. 40-42, August 2010.
5 / 15
A40. M. Uzam, “On Suboptimal Supervisory Control of Petri Nets in Presence of
Uncontrollable Transitions via Monitor Places,” International Journal of Advanced
Manufacturing Technology, DOI 10.1007/s00170-009-2219-0, vol. 47, numbers 5-8, pp. 567579, March 2010.
A41. G. Gelen and M. Uzam , “Novel analysis of Petri net based controllers by means of TCT
implementation tool of supervisory control theory,” Maejo International Journal of Science
and Technology, vol. 4, issue 3, pp. 360-396, September 2010. OPEN ACCESS
A42. M. Uzam, “A general technique for the PLC based implementation of RW supervisors
with time delay functions”, The International Journal of Advanced Manufacturing
Technology, DOI: 10.1007/s00170-011-3817-1, vol. 62, issue 5-8, pp. 687-704, 2012.
A43. Murat Uzam, “Comment on “a deadlock prevention approach for flexible manufacturing
systems with uncontrollable transitions in their Petri net models””, Asian Journal of Control,
DOI: 10.1002/asjc.566, Vol. 14, No. 14, pp. 1-4, July 2012.
A44. Murat Uzam and Gökhan Gelen, “An improved hybrid approach for the PLC based
implementation of reduced RW supervisors”, Turkish Journal of Electrical Engineering and
Computer Sciences, DOI: 10.3906/elk-1110-29, vol. 21, pp. 394-419, 2013. OPEN ACCESS
A45. Daniel Chao, Jiun-Ting Chen, and Murat Uzam, “Reaching most states via refining
controller regions for supervisors of two well-known S3PR”, International Journal of
Production Research, DOI:10.1080/00207543.2012.739733, vol. 51, Issue 15, pp. 4421-4430,
2013.
A46. Gaiyun Liu, Daniel Yuh Chao, and Murat Uzam, “Maximally permissive deadlock
prevention via an invariant controlled method”, International Journal of Production Research,
DOI: 10.1080/00207543.2012.752590, vol. 51, Issue 15, pp. 4431-4442, 2013.
A47. Murat Uzam and Gokhan Gelen, “Comments on "Efficient deadlock prevention policy in
automated manufacturing systems using exhausted resources"”, The International Journal of
Advanced Manufacturing Technology, DOI: 10.1007/s00170-014-5615-z, vol. 71, issue 9-12,
pp. 1729-1731, 2014.
A48. Murat Uzam and Gokhan Gelen, “On a deadlock prevention policy for a class of Petri
nets (SPMR)-P-3”, The International Journal of Advanced Manufacturing Technology, DOI:
10.1007/s00170-014-5821-8, vol. 73, issue 1-4, pp. 315-319, 2014.
A49. Murat Uzam and Zhiwu Li, “On an iterative deadlock prevention approach for automated
manufacturing systems”, The International Journal of Advanced Manufacturing Technology,
DOI: 10.1007/s00170-014-6018-x, vol. 74, issue 1-4, pp. 503-507, 2014.
A50. Murat Uzam and Gokhan Gelen, “Comments on "Supervisor design to enforce production
ratio and absence of deadlock in automated manufacturing systems"”, IEEE Transactions on
Systems, Man and Cybernetics - Systems, DOI: 10.1109/TSMC.2014.2314280, vol. 44, issue
10, pp. 1455-1456, 2014.
A51. YuFeng Chen, Zhiwu Li, Kamel Barkaoui, and Murat Uzam, “New Petri net structure and
its application to optimal supervisory control: interval inhibitor arcs”, IEEE Transactions on
Systems, Man and Cybernetics - Systems, DOI: 10.1109/TSMC.2014.2307284, vol. 44, issue
10, pp. 1384-1400, 2014.
A52. Murat Uzam and Gokhan Gelen, “On deadlock-free control of automated manufacturing
systems with flexible routes and assembly operations using Petri nets”, The International
Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-014-6071-5, vol. 74,
issue 9-12, pp. 1213-1217, 2014.
A53. Gökhan Gelen and Murat Uzam, “The synthesis and PLC implementation of hybrid
modular supervisors for real time control of an experimental manufacturing system”, Journal
of Manufacturing Systems, DOI: 10.1016/j.jmsy.2014.04.008, vol. 33, issue 4, pp. 535-550,
2014.
6 / 15
A54. Gaiyun Liu, Daniel Yuh Chao, and Murat Uzam, “A merging method for the siphonbased FMS maximally permissive controllers with simpler structures”, IMA Journal of
Mathematical Control and Information, DOI: 10.1093/imamci/dnt029, vol. 31, issue 4, pp.
551-573, 2014.
A55. Murat Uzam, Zhiwu Li, Gökhan Gelen, and Rabiu Saleh Zakariyya, “A divide-andconquer-method for the synthesis of liveness enforcing supervisors for flexible manufacturing
systems”, Journal of Intelligent Manufacturing, DOI: 10.1007/s10845-014-0938-z, published
online, 12 July 2014.
A56. Murat Uzam, Zhiwu Li, and Umar Suleiman Ebubakar, “Think-Globally-Act-Locally
Approach for the Synthesis of a Liveness-enforcing Supervisor of FMSs Based on Petri
Nets”,
International Journal of Production Research, published online, DOI:
10.1080/00207543.2015.1098785, 22 April 2015.
A57. Murat Uzam, Gökhan Gelen, and Tahir Lawan Saleh, “Think-Globally-Act-Locally
Approach with Weighted Arcs to the Synthesis of a Liveness-enforcing Supervisor for
Generalized Petri Nets Modeling FMSs”, Information Sciences, published online, DOI:
10.1016/j.ins.2015.09.010, 25 September 2015.
A58. Zhiwu Li, Murat Uzam, GuanJun Liu, Georg Frey, and Ying Tang, “Mathematical
Problems in Petri Nets Theory and Applications”, Mathematical Problems in Engineering,
open access article, http://dx.doi.org/10.1155/2015/240385, Volume 2015 (2015), Article ID
240385, 2 pages, September 2015.
A59. Murat Uzam, “On extraction of elementary siphons in a class of generalized Petri nets
using graph theory”, Engineering Computations, vol. 33, issue 1, 2016.
A60. Gökhan Gelen, Murat Uzam, and ZhiWu Li, “A New Method for the Redundancy
Analysis of Petri Net Based Liveness Enforcing Supervisors”, Transactions of the Institute of
Measurement and Control, published online, DOI: 10.1177/0142331215620005, December
31, 2015.
A61. YuFeng Chen, ZhiWu Li, Kamel Barkaoui, and Murat Uzam, “Monitor Design with
Multiple Self-loops for Maximally Permissive Supervisors”, ISA Transactions, accepted for
publication, 2 January 2016.
A62. Xiuyan Zhang and Murat Uzam, “Transition-Based Deadlock Control Policy Using
Reachability Graph for Flexible Manufacturing Systems”, Advances in Mechanical
Engineering, accepted for publication, 16 January 2016.
7.2. Other International Journal Papers :
B1. G. Cansever, Ş. N. Engin, Ö. F. Özgüven, M. Uzam, “Fuzzy Logic Controller in Modern
Control Systems: An Industrial Application”, Advances in Modelling & Analysis, C, AMSE
Periodicals, vol. 43, no. 1, pp. 41 - 63, 1994.
B2. A.H. Jones and M. Uzam, “Towards a Unified Approach to the Design of Knowledge
Based Agile Manufacturing Systems,” The Journal of Integrated Design and Process Science,
vol. 2, no. 3, pp. 55-76, September 1998.
B3. M. Uzam, A.H. Jones and İ. Yücel, “A Rule Based Methodology for Supervisory Control
of Discrete Event Systems Modelled as Automation Petri Nets,” The International Journal of
Intelligent Control and Systems, vol. 3, no. 3, pp. 297-326, 1999.
B4. M. Uzam and A.H. Jones, “A New Petri-Net-Based Synthesis Technique for Supervisory
Control of Discrete Event Systems”, Turkish Journal of Electrical Engineering and Computer
Sciences, vol. 10, no.1, pp. 85-109, 2002.
7 / 15
B5. M. Uzam, R. Dalcı, and G. Gelen, “Ladder Logic Implementation of Ramadge-Wonham
Supervisors with Timed Transitions”, Mechatronic Systems, vol. 2, no. 1, pp. 1-10, January
2012.
7.3. International Conference Papers:
C1. A.H. Jones, M. Uzam, A.H. Khan, D. Karimzadgan, S.B.Kenway, “A General
Methodology for Converting Petri Nets Into Ladder Logic: The TPLL Methodology”,
Proceedings of the 5th International Conference on Computer Integrated Manufacturing and
Automation Technology - CIMAT'96, May 1996, France, pp. 357-362.
C2. M. Uzam and A.H. Jones, “Design of a Discrete Event Control System for a Manufacturing
System Using Token Passing Ladder Logic”, Proceedings of the CESA'96 IMACS
Multiconference, Symposium on Discrete Events and Manufacturing Systems, Lille, France,
July 1996, pp. 513-518.
C3. M. Uzam and A.H. Jones, “Design of Ladder Logic for an Agile Manufacturing System
Using Token Passing Ladder Logic”, Proceedings of the 1st Turkish Symposium on
Intelligent Manufacturing Systems, IMS'96, Sakarya, Turkey, May 30 -31, 1996, pp. 513 518.
C4. A.H. Jones, N. Ajlouni, M. Uzam, “On-line Frequency Domain Identification and Genetic
Tuning of PID Controllers”, Proceedings of the 1996 IEEE Conference on Emerging
Technologies and Factory Automation - ETFA’96, Kauai Marriott, Kauai, Hawaii, USA,
November 18 -21, vol. 1, pp. 261 - 266.
C5. A.H. Jones, N. Ajlouni, Y.-C. Lin, S.B. Kenway, M. Uzam, “Genetic Design of Robust
PID Plus Feedforward Controllers”, Proceedings of the 1996 IEEE Conference on
Emerging Technologies and Factory Automation - ETFA’96, Kauai Marriott, Kauai,
Hawaii, USA, November 18 -21, vol. 1, pp. 267 - 271.
C6. M. Uzam, A.H. Jones, N. Ajlouni “Conversion of Petri Net Controllers for Manufacturing
Systems Into Ladder Logic Diagrams”, Proceedings of the 1996 IEEE Conference on
Emerging Technologies and Factory Automation - ETFA’96, Kauai Marriott, Kauai,
Hawaii, USA, November 18 -21, vol. 2, pp. 649 - 655.
C7. A.H. Jones, M. Uzam, N. Ajlouni, “Design of Discrete Event Control Systems for
Programmable Logic Controllers Using T-timed Petri Nets”, Proceedings of the 1996 IEEE
International Symposium on Computer-Aided Control System Design - CACSD’96,
Dearborn, MI, USA, September 15 - 18, 1996, pp. 212 - 217.
C8. M. Uzam and A.H. Jones, “Equivalence of Control Places and Control Transitions in Petri
Net Controllers”, Proceedings of the 1996 International Conference on Circuits, Systems
and Computers - CSC'96, Piraeus, Greece, July 15 -17, 1996, vol. 2, pp. 535 - 539.
C9. M. Uzam and A.H. Jones, “Towards a Unified Methodology for Converting Coloured Petri
Net Controllers into Ladder Logic Using TPLL: Part I - Methodology”, Proceedings of
International Workshop on Discrete Event Systems - WODES'96, Edinburgh, UK, August
19 - 21, 1996, pp. 178 - 183.
C10. A.H. Jones and M. Uzam, “Towards a Unified Methodology for Converting Coloured
Petri Net Controllers into Ladder Logic Using TPLL: Part II - An Application”, Proceedings
of International Workshop on Discrete Event Systems - WODES'96, Edinburgh, UK,
August 19 - 21, 1996, pp. 314 - 319.
C11. A.H. Jones and M. Uzam, “Design of Sequential Control Systems in Statement Lists Using
TPL: Part I - Token Passing Statement List”, Proceedings of 2nd Portuguese Control
Conference - Controlo'96, Porto, Portugal, September 11 - 13, 1996, pp. 341 - 346.
8 / 15
C12. M. Uzam and A.H. Jones, “Design of Sequential Control Systems in Statement Lists Using
TPL: Part II - An Application”, Proceedings of 2nd Portuguese Control Conference Controlo'96, Porto, Portugal, September 11 - 13, 1996, pp. 771 - 775.
C13. A.H. Jones and M. Uzam, “Towards a Unified Approach to the Design of Knowledge
Based Agile Manufacturing Systems: Part I - Methodology”, Proceedings of the 2nd World
Conference on Integrated Design and Process Technology - IDPT'96, Austin, Texas, USA,
December 1 - 4, 1996, vol. 3, pp. 369 - 376.
C14. M. Uzam and A.H. Jones, “Towards a Unified Approach to the Design of Knowledge
Based Agile Manufacturing Systems: Part II - An Application”, Proceedings of the 2nd
World Conference on Integrated Design and Process Technology - IDPT'96, Austin, Texas,
USA, December 1 - 4, 1996, vol. 3, pp. 377 - 384.
C15. A.H. Jones, M. Uzam, D. Karimzadgan, “Design of Knowledge Based Sequential Control
Systems”, Proceedings of the World Automation Congress - WAC’96, Montpellier, France,
May 28 -30, 1996, Intelligent Automation Control - Recent Trends in Development and
Applications, TSI Press Series, vol. 4, pp. 343 - 348.
C16. A.H. Jones, M. Uzam, P. B. de M. Oliveira, “Design of Knowledge Based Sequential
Control Systems for Manufacturing Systems”, Proceedings of the IEEE Mediterranean
Symposium on New Directions in Control & Automation - MSCA’96, Crete, Greece, June
10 -14, 1996, pp. 764 – 769.
C17. M. Uzam and A.H. Jones, “Real-Time Implementation of Automation Petri Net Controllers
Using Programmable Logic Controllers”, Preprints of the the 4th IFAC Workshop on
Algorithms and Architectures for Real-Time Control - AARTC’97, Vilmoura, Portugal,
April 9 - 11, 1997, pp. 421 - 426.
C18. A.H. Jones and M. Uzam, “A Formal Technique for the Synthesis of Petri Net Supervisors
for Discrete Event Systems”, Proceedings of the International Conference on Control CONTROL'98, University of Wales, Swansea, UK, September 1 - 4, 1998, pp. 845-852.
C19. M. Uzam and A.H. Jones, “A Methodology for the Synthesis of Petri-Net-Based
Supervisory Controllers for Manufacturing Systems: Part I - The Synthesis Procedure”,
Proceedings of the 2nd International Symposium on Intelligent Manufacturing Systems,
IMS'98, Sakarya University, Sakarya, Turkey, 6-7 August 1998, Vol. II, pp. 1013-1024.
C20. M. Uzam and A.H. Jones, “A Methodology for the Synthesis of Petri-Net-Based
Supervisory Controllers for Manufacturing Systems: Part II - An Application”, Proceedings
of the 2nd International Symposium on Intelligent Manufacturing Systems, IMS'98, Sakarya
University, Sakarya, Turkey, 6-7 August 1998, Vol. I, pp. 535-546.
C21. G. Cansever, M. Uzam and A.H. Jones, “Petri Net Based Design of Discrete Event
Systems for Programmable Logic Controller”, Proceedings of the 4th International PLCopen
Conference on Industrial Control Programming, ICP'2000, Utrecht, The Netherlands, 10-11
October 2000, pp. 79-86.
C22. M. Uzam, M. K. Yalçın and M. Avcı, “Digital Hardware Implementation of Petri Net
Based Specifications: Direct Translation from Safe Automation Petri Nets to Circuit
Elements” Proceedings of the International Workshop on Discrete Event Systems Design,
DESdes’01, June 27-29, 2001, Przytok near Zielona Gora, Poland, pp. 25-33.
C23. M. Uzam and M. C. Zhou, “Iterative Synthesis of Petri Net Based Deadlock Prevention
Policy for Flexible Manufacturing Systems”, Proceedings of the 2004 IEEE International
Conference on Systems, Man and Cybernetics, The Hague, The Netherlands, Oct. 10-13
2004, pp. 4260-4265.
C24. M. Uzam, İ. Burak Koç, Gökhan Gelen and B. Hakan Aksebzeci, “Asynchronous
Implementation of a Petri Net Based Discrete Event Control System Using a Xilinx FPGA”,
9 / 15
Proceedings of the 35th International Conference on Computers and Industrial Engineering ,
Istanbul, Turkey, June 20-22, 2005, Vol. II, pp. 2025-2030.
C25. M. Uzam, G. Gelen, R. Dalcı, “A new approach for the ladder logic implementation of
Ramadge-Wonham supervisors”, Proceedings of the 22nd International Symposium on
Information, Communication and Automation Technologies, Sarajevo, Bosnia and
Herzegovina, October 29-31, 2009.
C26. M. Uzam, G. Gelen, R. Dalcı, “Timed transition automata and their ladder logic
implementation”, Proceedings of the 22nd International Symposium on Information,
Communication and Automation Technologies, Sarajevo, Bosnia and Herzegovina, October
29-31, 2009.
C27. M. Uzam, G. Gelen, R. Dalcı, “An Effective Method for Detection and Elimination of
Avalanche Effect Problem”, Proceedings of the 2010 IEEE International Conference on
Mechatronics and Automation (ICMA 2010), Xi'an, China, August 4-7, 2010, pp. 19881993.
C28. G. Gelen, M. Uzam, R. Dalcı, “The Concept of Postponed Event in Timed Discrete Event
Systems and Its PLC Implementation”, Proceedings of the 2010 IEEE International
Conference on Systems, Man, and Cybernetics (SMC 2010), İstanbul, Turkey, October 1013, 2010, pp. 2753-2759.
C29. M. Uzam, R.S. Zakariyya, G. Gelen, and Z.W. Li, “The Computation of Liveness
Enforcing Supervisors From Submodels of a Petri Net Model of FMSs”, DOI:
10.1109/TENCON.2013.6718803, Proceedings of the IEEE International Conference of
Region 10 (TENCON), Xian, People’s Republic of China, October 22-25, 2013, pp. 1-4.
C30. M. Uzam, Z.W. Li and U.S. Abubakar, “A General Approach for the Computation of a
Liveness Enforcing Supervisor for the Petri Net Model of an FMS”, Proceedings of the 1st
International Workshop on Petri Nets for Adaptive Discrete-Event Control Systems colocated with 35th International Conference on Application and Theory of Petri Nets and
Concurrency (Petri Nets 2014) Tunis, Tunisia, June 24, 2014, pp. 68-82. OPEN ACCESS
C31. M. Zhao, M. Uzam and Y.F. Hou, “A divide-and-conquer method for the synthesis of
non-blocking
supervisors
for
flexible
manufacturing
systems”,
DOI:
10.1109/CoASE.2014.6899365, Proceedings of the 2014 IEEE International Conference on
Automation Science and Engineering (CASE) Taipei, Taiwan, August 18-22, 2014, pp. 455460.
C32. Y.F. Hou, M. Zhao, M. Uzam, and D. Liu, “A reachability graph-based iterative method
for
the
synthesis
of
near-optimal
non-blocking
supervisors”,
DOI:
10.1109/TENCON.2015.7372803, Proceedings of the IEEE International Conference of
Region 10 (TENCON), TENCON 2015, Macao, November 1-4, 2015, pp. 1-6.
7.4. Books or Book Chapters (written in English):
D1. Murat Uzam, Building a Programmable Logic Controller with PIC16F648A
Microcontroller, ISBN: 978-1-46-658985-8, 28th August 2013 by CRC Press – 371 pages.
7.5. National Journal and Magazine Papers:
E1. M. Uzam, “The Enabling Arc Method for the Synthesis of Petri-Net-Based Supervisors
for Discrete Event Systems”, Niğde Üniversitesi, Mühendislik-Mimarlık Fakültesi,
Mühendislik Bilimleri Dergisi, Temmuz 1998, cilt 2, sayı 1, sayfa 53-68.
10 / 15
E2. M. Uzam, G. Gelen, İ. B. Koç, ve B. H. Aksebzeci, “Ayrık Olay Kontrol Sistemlerinin
Petri Ağları ile Tasarımı ve PLC ile Gerçekleştirilmesi”, sayı 125, sayfa 18-22, Endüstri &
Otomasyon, Ağustos 2007.
E3. G. Gelen, B. H. Aksebzeci, İ. B. Koç, ve M. Uzam, “Basit Otomasyon Petri Ağları ile
Ayrık Olay Sistemlerinin Modellenmesi”, sayı 129, sayfa 16-21, Endüstri & Otomasyon,
Aralık 2007.
E4. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC Donanım”, sayı 153, sayfa
22-24, Aralık 2009.
E5. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 2 Temel Yazılım”, sayı
154, sayfa 18-26, Ocak 2010.
E6. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 3 Kontak ve Röle Temelli
Makrolar”, Endüstri & Otomasyon, sayı 155, sayfa 30-33, Şubat 2010.
E7. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 4 Flip-Flop Makroları”,
Endüstri & Otomasyon, sayı 156, sayfa 16-22, Mart 2010.
E8. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 5 Zamanlayıcı
Makroları”, Endüstri & Otomasyon, sayı 157, sayfa 30-37, Nisan 2010.
E9. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 6 Sayıcı Makroları”,
Endüstri & Otomasyon, sayı 158, sayfa 16-22, Mayıs 2010.
E10. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 7 Karşılaştırma
Makroları”, Endüstri & Otomasyon, sayı 159, sayfa 16-19, Haziran 2010.
E11. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 8 Aritmetik Makroları”,
Endüstri & Otomasyon, sayı 160, sayfa 28-31, Temmuz 2010.
E12. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 9 Lojik Makroları”,
Endüstri & Otomasyon, sayı 161, sayfa 28-31, Ağustos 2010.
E13. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 10 Kaydırma ve
Döndürme Makroları”, Endüstri & Otomasyon, sayı 162, sayfa 24-29, Eylül 2010.
E14. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 11 Veri Seçici
Makrolar”, Endüstri & Otomasyon, sayı 163, sayfa 30-34, Ekim 2010.
E15. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 12 Veri Dağıtıcı
Makrolar”, Endüstri & Otomasyon, sayı 164, sayfa 16-20, Kasım 2010.
E16. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 13 Kod Çözücü
Makroları”, Endüstri & Otomasyon, sayı 165, sayfa 16-22, Aralık 2010.
E17. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 14 Öncelikli Kodlayıcı
Makroları”, Endüstri & Otomasyon, sayı 166, sayfa 16-21, Ocak 2011.
E18. M. Uzam, “PIC16F877A Mikro-Denetleyicisi Temelli PIC PLC - 15 Bir Örnek: Uzaktan
Kumandalı Model Kapı”, Endüstri & Otomasyon, sayı 167, sayfa 18-24, Şubat 2011.
7.6. National Conference Papers:
F1. G. Cansever, Ö. F. Özgüven, M. Uzam, Ş. N. Engin, “Kontrol Sistemlerinde Bulanık Lojik:
Bulanık Lojik Deneteleyici”, Elektrik Mühendisliği 5. Ulusal Kongresi, Trabzon, 1993, s. 57
- 62.
F2. M. Uzam, G. Cansever, Ş. Alkan, “Programlanabilir Lojik Denetleyicilerde Yaygın olarak
Kullanılan Giriş/Çıkış Arabirimleri”, Elektrik Mühendisliği 5. Ulusal Kongresi, Trabzon,
1993, s. 63 - 68.
F3. M. Uzam, Ö. F. Özgüven, B. Kılıç, M. Öztürk, A. Saral, “Atık Su Arıtımında Oluşan
Biyogazın Ölçümü için Mikro Denetleyici Kontrollu Cihaz Tasarımı”, Elektrik Mühendisliği
5. Ulusal Kongresi, Trabzon, 1993, s. 937 - 942.
11 / 15
F4. M. Uzam, “Lojik Kontrol Sistemlerinin Tasarımında Otomasyon Petri Net’lerin Kullanımı
ve PIC16F84 Mikrodenetleyicisi ile bir Uygulama”, Elektrik-Elektronik-Bilgisayar
Mühendisliği Sempozyumu, ELECO’2000, Bursa, 8-12 Kasım, 2000, s. 388-392.
F5. H. F. Turgutlu, ve M. Uzam, "PIC 16F84 Mikrodenetleyicisi ile Bir Deneysel Endüstriyel
Sistemin Kontrol Edilmesi", TOK 2002, Otomatik Kontrol Ulusal Toplantısı, ODTÜ Ankara, 9-11 Eylül 2002, bildiriler kitabı, s. 745-753.
F6. M. Can, M. K. Yalçın ve M. Uzam, “RF ile Uzaktan Kumandalı Otomatik Kapının
Gerçekleştirilmesi”, III. Ulusal Proje Aranıyor’03 Öğrenci Sempozyumu, Erciyes
Üniversitesi, Müh. Fak. Elektronik Müh. Böl., 28-30 Nisan 2003, s. 57-62.
F7. E. Saraç, İ. Karakaya, M. K. Yalçın ve M. Uzam, “Uzaktan Kumanda Edilen Lamba
Dimmerinin Gerçekleştirilmesi”, III. Ulusal Proje Aranıyor’03 Öğrenci Sempozyumu,
Erciyes Üniversitesi, Müh. Fak. Elektronik Müh. Böl., 28-30 Nisan 2003, s. 51-56.
F8. Gökhan Gelen ve M. Uzam, “Güvenilir Otomasyon Petri Netlerin Xilinx XC2S200
FPGA'sı ile Gerçekleştirilmesi ve Uzaktan Kumandalı Kapı Modelinin Kontrol Edilmesi”,
Elektrik-Elektronik-Bilgisayar Mühendisliği 11. Ulusal Kongresi, İstanbul, 22-25 Eylül
2005, Bildiriler Kitabı-1, s. 70-73.
F9. İsmail Yavuz, Gökhan Gelen ve M. Uzam, “Akıllı Sayma Rölesi Tasarımı ve PIC16F877
Mikrodenetleyicisi ile Gerçekleştirilmesi”, Elektrik-Elektronik-Bilgisayar Mühendisliği 11.
Ulusal Kongresi, İstanbul, 22-25 Eylül 2005, Bildiriler Kitabı-2, s. 496-499.
F10. G. Gelen, B. H. Aksebzeci, İ. B. Koç, ve M. Uzam, “Basit Otomasyon Petri Ağları
Kullanılarak Ayrık Olay Sistemlerinin Modellenmesi”, 3. Otomasyon Sempozyumu, Denizli,
11-12 Kasım 2005, Bildiriler Kitabı, s. 153-157.
F11. M. Uzam, G. Gelen, İ. B. Koç, ve B. H. Aksebzeci, “Ayrık Olay Kontrol Sistemlerinin
Petri Ağları ile Tasarımı ve Programlanabilir Lojik Denetleyicilerle Gerçekleştirilmesi”, 3.
Otomasyon Sempozyumu, Denizli, 11-12 Kasım 2005, Bildiriler Kitabı, s. 158-162.
F12. G. Gelen ve M. Uzam, "Ayrık Olay Sistemlerinin R&W Yöntemi ve Petri Ağları Temelli
Melez Kontrolü", TOK 50nci Yıl, Otomatik Kontrol Ulusal Toplantısı, İTÜ - İstanbul, 13-15
Kasım 2008, bildiriler kitabı, Cilt 2, s. 719-724.
F13. G. Gelen, M. Uzam, “Ayrık Olay Sistemleri için Petri Ağları ve R&W Metodu Tabanlı
Modüler Melez Gözeticilerin Sentezlenmesi”, Otomatik Kontrol Ulusal Toplantısı Bildiriler
Kitabı, TOK 2012, Niğde, 11-13 Ekim, 2012, Cilt 1, syf. 200-205.
F14. G. Gelen, M. Uzam, “Petri Ağları Temelli Kördüğüm Önlemede Optimal Davranışın
Belirlenmesi”, Otomatik Kontrol Ulusal Toplantısı Bildiriler Kitabı, TOK 2013, Malatya,
26-28 Eylül, 2013, syf. 1137-1142.
F15. G. Gelen, M. Uzam, “Esnek Üretim Sistemlerinde Kördüğüm Problemi ve Çözüm
Yöntemleri”, Otomatik Kontrol Ulusal Toplantısı Bildiriler Kitabı, TOK 2013, Malatya, 2628 Eylül, 2013, syf. 443-448.
7.7. Other Publications:
G1. M. Uzam, “Ultimate Contact Debouncer” Published online in EDN (Electronics, Design,
Strategy, News), http://www.edn.com/article/CA6576001.html, 8 July 2008.
7.8. Books or Book Chapters (written in Turkish) :
H1. M. Uzam, “PICBIT_PLC ile Lojik Tasarım”, ISBN: 975-511-508-0, 613 sayfa, Birsen
Yayınevi, Eylül 2008.
H2. M. Uzam, “PIC 16F877A Temelli PLC”, ISBN: 978-975-511-586-3, 322 sayfa, Birsen
Yayınevi, 2013.
12 / 15
8.
Projects :
1. Control Synthesis of Discrete Event Systems, MARS action – INRIA, France,
Researcher, 1.7.1999-31.09.1999.
2. “A Theoretical and Experimental Study on Petri Nets and Ramadge-Wonham Methods
for the Synthesis of Controllers for Discrete Event Systems and Their Application to
Manufacturing Systems”, Project Leader, This Project is supported by the research
grant of the Scientific and Technological Research Council of Turkey (Türkiye
Bilimsel ve Teknolojik Araştırma Kurumu - TÜBİTAK) under the project number
TÜBİTAK-107E125.
Start Date
Duration
Budget
1 October 2007
36 Months ~120.000 USD
3. “Theoretical Studies on New Approaches for Petri Nets Based Deadlock Prevention in
Flexible Manufacturing Systems”, Project Leader, This Project is supported by the
research grant of the Scientific and Technological Research Council of Turkey
(Türkiye Bilimsel ve Teknolojik Araştırma Kurumu - TÜBİTAK) under the project
number TÜBİTAK-112M229.
Start Date
1 January 2013
Duration
30 Months
Budget
~120.000 USD
9. Citation Report from Web of Science (Report Date: 19 January 2016)
13 / 15
13. Lectures given recently both on undergraduate and graduate level.
Academic Year
Semester
1st
2008-2009
(Niğde University)
2nd
1st
2009-2010
(Niğde University)
2nd
2010-2011
(Niğde University)
1st
2010-2011
(Melikşah University)
2nd
2011-2012
(Melikşah University)
Logic Circuits
Microprocessors
Programmable Logic Controllers
Design with PIC Microcontrollers
Industrial Control Systems
Microprocessors Lab.
Logic Design Lab.
Control of Discrete Event Systems
PIC PLC
Logic Circuits
Microprocessors
Programmable Logic Controllers
Industrial Control Systems
Microprocessors Lab.
Logic Design Lab.
Logic Circuits
Microprocessors
Programmable Logic Controllers
Introduction
Engineering
to
Electrical
and Electronics
Design with PIC Microcontrollers
1st
2nd
1st
2012-2013
(Melikşah University)
2nd
1st
2013-2014
(Melikşah University)
2nd
2014-2015
The name of lecture
1st
Digital Design
PIC PLC
Digital Design
Design of a Microcontroller Based PLC
Digital Design
Microcontrollers
PIC PLC
Sayısal Tasarım
Digital Design
Design of a Microcontroller Based PLC
Digital Design
PIC PLC
Industrial Control Systems
Digital Design
Design of a Microcontroller Based PLC
Industrial Control Systems
level
undergraduate
undergraduate
graduate
graduate
undergraduate
undergraduate
undergraduate
graduate
graduate
undergraduate
undergraduate
graduate
undergraduate
undergraduate
undergraduate
undergraduate
undergraduate
graduate
undergraduate
graduate
undergraduate
graduate
undergraduate
graduate
undergraduate
undergraduate
graduate
undergraduate
undergraduate
graduate
undergraduate
graduate
undergraduate
undergraduate
graduate
undergraduate
14 / 15
(Melikşah University)
PIC PLC
2nd
2015-2016
(Melikşah University)
1st
Digital Design
Design of a Microcontroller Based PLC
Industrial Control Systems
PIC PLC
graduate
undergraduate
graduate
undergraduate
graduate
2nd
15 / 15