XB5R range Wireless & Batteryless
Automatic doors offer
Automatic doors
Opening of the door for drivers of forklift and pedestrians
Switch
Rope
Rope
Control pannel
Schneider Electric - BU INDUSTRY- Rope pull switch
2
Customer issues with standard “Cable pull switch”
● The wired “cable pull switch” is always problematic and costly to
install
●
●
●
●
Every building / plant are different ( roof height, length of cable ….)
A scissor-lift is always needed (safety rules, >2.50m)
Sometime additional cable tray must be added
The cabling can not be prepared in the OEM plant. The cabling must be
done during the door installation
● Who is using the “Cable pull switch”
● The product is used by the pedestrians and forklift drivers
● The market and the competition
● Schneider is leading this market with the XY2C/XCKM (standard wiring)
● Direct competitor: Steute with RF95 (Wireless, batteryless switch)
Schneider Electric - BU INDUSTRY- Rope pull switch
3
XB5R range, offer proposal
Rope pull switch wireless & batteryless : ZBRP1
Mushroom head for XB5R range
Transmitter
Schneider Electric - BU INDUSTRY- Rope pull switch
: ZB5RZC2
Receiver
4
Automatism of Automatic doors
Control Panel
Receiver
Smart relay
Drive
or PLC
Or
Radio card
Schneider Electric - BU INDUSTRY- Rope pull switch
Dedicated PCB card
Drive
5
Rope pull switch ZBRP1
● Wireless (Radio Communication) – No wiring needed!
● No Battery! (Self Powered)
Holes for screw dia 5mm
Radio
transmission
40*
40* : same as XY2CD
Receiver
between 2 ropes
Schneider Electric - BU INDUSTRY- Rope pull switch
Panel mounting
6
Main technical datas Rope pull switch
ZBRP1
Mounting & Operating conditions
Mounting :
Panel mounting (for 2 screws dia.5mm – entraxe 40mm)
or between 2 ropes (dia. Of the rope < 1,5cm)
• Works in any position (including horizontal position)
•Ambiant air temperature (operation) : -25°C …. +70°C
• Ambiant air temperature (storage) : -40°C …. +70°C
• Mechanical durability : 1 million of operating cycles
• Degree of protection : IP66 / UL CSA Type NEMA4 outdoor
• Pull strenght (when pulling) to activate : between 3 to 5 daN
• Pull / Out strenght resistance (maximum) : arround 100 daN
• Chock resistance : IK03
• Weight of the rope maxi : 500g
Schneider Electric - BU INDUSTRY- Rope pull switch
7
Main technical datas Rope pull switch
Radio frequency & Standards
• Radio frequency
- protocol : Zigbee green power
- frequency : 2.4Ghz, worldwide compatible (as ZBRT1)
• Main Standards & Certifications
- EN/IEC 60947-1 / 60947-5-1 ,
- UL508, CSA C22-2
• Radio certification : as standard range XB5R
- UL, CSA, CE, Ctick (Australia), RSS (Canada), Gost (Russia), Anatel (Brasil),
SRRC (China), Japan …
Schneider Electric - BU INDUSTRY- Rope pull switch
8
Mushroom head for XB5R range (plastic only)
Mushroom head pushbutton, Spring return for transmitter ZBRT1
• Head color : black
• Diameter : 40mm
• Ambiant air temperature (storage) :
-40..+70°C
• Ambiant air temperature (operation) : -25..+70°C
• Degree of protection : IP65 (w/o bellow), IP69K (with bellow(1))
UL/CSA type Nema 12
• Mechanical durability : 1 million operating cycles
ZB5RTC2 Complete pushbutton including
- the pushbutton head (ZB5RZC2)
- the transmitter (ZBRT1) fitted with plastic fixing collar
ZB5RZC2
Pushbutton head only(1) , 40mm black mushroom, spring return
(1) Compatible with Hy ZBZ*** bellows, ZBZ28 black recommended
Schneider Electric - BU INDUSTRY- Rope pull switch
9
Receiver ZBRRD configurable
Monostable – Bistable
output function
Power Supply
Buttons for parameterization
Note : the ZBRRD configurable
receiver is a « Monostable or
Bistable version only.
For price positioning & cost
saving purpose, the « StopStart » function has been
removed from the receiver.
Reception signal strenght
Output:
2 relays CO – 3A
Schneider Electric - BU INDUSTRY- Rope pull switch
10
Make the most of your energy
Thank
You!
Schneider Electric - BU INDUSTRY- Rope pull switch
11