Digital Force Gauge Test Stand

T

RD

1.

Analog Force Gauge

TRIPOD CATALOG

2.

Digital Force Gauge

3.

Electronic Test Stand

4.

Manual Test Stand

5.

Spring Tester

6.

Torque meter

7.

Hardness Tester

8. Rope Tension Equipment

9. Tension gauge

10.

Other test equipment

11. Grips/Jips/Clamp

Before you move forward, you must forget the past!

TRDTrading Hungary Kft. 1139 Budapest, Röppentyű u. 21-23 Tel: 00 36 20 777 1050 Web: www.trd.hu Email: info@trd.hu

Analog Push Pull Gauge(NK, NLB, ALB)

The NK, NLB, ALB series are dial force gauge with compact size and high accuracy. They are easy to operate and handy to carry out. Widely applied in rubber plastic, light industry, textile, building windows and doors, compound materials, electric wire and cable, auto part, power generator, scientific research institute to do the push pull force insertion force and destructive experiment.

CATALOG ►



Character:

With easy operate and can be installed with all kinds of test stand and clamp.

Peak holding function and continuous.

One year free maintenance.

Compact and artistic packing, easy to transit and stock.

Two kind of unit dual show at the same time, don't need unit conversion.

NK Series: Newton and Kilogram dual unit;

NLB Series: Newton and Pound dual unit;

ALB: Pound and Kilogram dual unit.

Needle indicates, easy to read, high accuracy.



Mode

NK-

10

NK-

20

Capacity 10N 20N

Resolution

0.05

N

0.1N

NK-

30

30N

0.2N

NK-50

50N

0.25N

NK-

100

0.5N

NK-

200

1.0N

NK-

300

2.0N

NK-

500

100N 200N 300N 500N

2.5N

NLB-

10

10N

0.05N

NLB-

20

20N

0.1N

Stroke

Dimension

10mm

260x66x36mm

NLB-

30

30N

0.2N

NLB-

50

50N

0.25N

Mode

Capacity

Resolution

Stroke

Dimension

NLB-

100

100N

0.5N

NLB-200 NLB-300

200N

1.0N

300N

2.0N

NLB-

500

500N

ALB-2

2.2lb

ALB-4

4.5lb

ALB-10

11lb

2.5NB

0.01lb

0.02lb

0.05lb

10mm

260x66x36mm

ALB-20

22lb

0.1lb

ALB-40

45lb

0.2lb

ALB-

100

110lb

0.5lb


Digital Push Pull Gauge(HF)

The HF series are digital force gauge with compact size, high accuracy, they are easy to operate and handy to carry out. Widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for test of pull or push load test, insertion force or pull and destructive experiment. This digital force gauge is new generation pulls the pressure measuring instrument.

CATALOG ►



Character:

•Connect the computer in-phase test.

•The compare value set by user’s request.

•Big memory deposit function.

•LCD overturns show.

•Auto peak.

•Auto close time set.



MODEL

HF

-2

HF-3 HF-5

HF-

10

HF-

20

HF-30

HF-

50

HF-

100

HF-

200

Capacity 2N 3N

Resolution

0.

00

1N

0.001

N

5N 10N 20N 30N 50N 100N 200N

0.001

N

0.01N

0.01N

0.01N

0.01N

0.1N

0.1N

HF-300

HF-

500

HF-

1000

300N 500N 1000N

0.1N

0.1N 1N

Sensor structure

S model high-precision sensor (built-in)

Accuracy

Size

± 0.5%

230x66x36mm



MODEL

Capacity

HF-

200

0

200

0N

Resoluti on

1N

HF-

3000

3000

N

1N

HF-

5000

5000

N

1N

HF-

10K

HF-

20K

HF-

30K

HF-

50K

HF-

100K

HF-

200K

HF-

300K

HF-

500K

HF-

1000K

10KN

0.01K

N

20KN

0.01K

N

30KN 50KN

100K

N

200K

N

300KN

0.01K

N

0.1KN

0.1KN

0.1KN

0.1N

500K

N

0.1KN

1000KN

1KN

Sensor structure

Accurac y

Size

S model high-precision sensor (external)

± 0.5%

230x66x36mm

Cylindrical or spoke (external)

± 1%


Electric Double Column Vertical Test

Stand(AEV)

Function:

The AEV electric test stand is the matching test stand of HF and NK series force gauge. This product uses the double erecting pole structure, good stability, applies widely, easy to operate.

And have the step less speed regulation, manual (inching), and the auto control switch function. Widely applied in rubber plastic, light industry, textile, building windows and doors, compound materials, electric wire and cable, auto part, power generator, scientific research institute to do the push pull force insertion force and destructive experiment.

CATALOG ►


Electric Test Stand (AEV)

Specification:

Capacity: 5000N-30000N

Stroke: 220mm or more

Speed: 0-240mm/min

Voltage: 220V(AC 110V can be specified)

Dimension: Small:115.5x49.5x37cm

Big52.5X165X41cm

Gross Weight: 75-90KG


Electric Horizontal Test Stand (AEH)

Function:

AEH electric horizontal test stand is special design for NK and HF series force gauge. This product uses the double erecting pole structure, good stability, applies widely, easy to operate. And has the step less speed regulation, manual

(inching), and the auto control switch function. Widely applied in rubber plastic, light industry, textile, building windows and doors, compound materials, electric wire and cable, auto part, power generator, scientific research institute to do the push pull force insertion force and destructive experiment.


Electric Horizontal Test Stand (AEH)

Specification:

Capacity: 500N-1000N

Stroke: 150 mm

Speed: 0~500 mm/min

Voltage: AC 220V

(AC 110V can be specified)


Electric Terminal Machine (AEG)

Function:

This kind machine is the same usage as terminal pull force tester. The only difference is this is the electric type, using the digital force gauge, two clamps and the

AEH electric horizonal test stand, it's more convenient in testing. So we called Electric terminal machine.


Electric Single Column Vertical

Test Stand (AEL)

Function:

The AEL electrically single column test stand is suitable for measuring all kinds of product pull pressure, destruction, break, the linker insert and draws out load capacity value. Reasonable structure, artistic outline, uses electric motor add load, speed control, convenient and reliable, precision screw rod transmission, steady movement, low noise, high accuracy, according to the customer requirement deploy different grips.


Electric Single Column Test Stand (AEL)

Specification:

Maximum load bearing test weight: 500N;

Test speed range: 0~200mm/min;

Machine dimension (long * wide * high):

44X37X69cm;

Machine gross weight: 41kg;

Maximum stroke: 220mm (not contain grips)


Hydraulic Manual Test Stand (ALE)

Function:

ALE Hydraulic model test frame is designed for HF series push pull force gauge operation, manual operation. Using large hydraulic jacks to realize big load force test, Simple and stable operation, it can be combined with different fixtures in various combinations of different purposes compressive load test.


Hydraulic Manual Test Stand (ALE)

Max. load 5k

Compress chamber

150m m

5T

240mm

Stretching chamber

185m m

Effective stroke

120mm

90mm 125mm

Dimensio ns

Net weight

190 × 1

40 × 88

0mm

225 × 180

1000mm

30kg 41.6kg

×

10T

280mm

130mm

125mm

300 × 300

× 1185m m

90.3kg

20T

245mm

165mm

145mm

300 × 300 ×

1220mm

98kg

50T

290mm

150mm

160mm

350 × 350

× 1410mm

194kg


Analog Force Gauge Test Stand (AST-S)

Function:

AST-S test stand is specially design for the analog series force gauge to make up of different test equipment doing the push pull force insertion force and destructive experiment.

CATALOG ►


Analog Force Gauge Test Stand (AST-J)

Character:

• Hand press, operate simply and firmly.

Compact structure, gear and rack transmission.

• Fix firmly, big feet and heavy frame, can install on the floor (tabletop) to use, causes operate more firmly.

• Matching digital staff gauge, collection stroke data at any moment.

Parameter:

Capacity: 500N

Stroke: 90mm

Dimension: 255x240x550mm

Weight: 12KG


Digital Force Gauge Test Stand (AST-S)

Function:

AST-S test stand is specially design for digital series force gauge to make up of different test equipment doing the push pull force insertion force and destructive experiment.


Digital Force Gauge Test Stand (AST-S)

Character:

•Hand press, operate simply and firmly.

Compact structure, gear and rack transmission.

•Fix firmly, big feet and heavy frame, can install on the floor (tabletop) to use, causes operate more firmly.

•Matching digital staff gauge, collection stroke data at any moment.

Parameter:

Capacity: 500N

Stroke: 90mm


Weight: 12KG


Screw Test Stand(ALX)

Function:

ALX Screw test stand are fit to the domestic and imported NK, NLB, ALB series point type of mechanical force gauge and HF series of digital mechanical force gauge, which are subject to the pull load and plug destructive force test, also can be installed with steel gauge or digital gauge. Users can clearly observe the displacement when testing.


Screw Test Stand (ALX)

Parameters ：

·Maximum load:500N

·Effective stroke:150 mm

·Length × width × height:230 × 150 × 490 mm

·Effective area of the test area:105 × 100 mm

·Net weight: 9 kg


Sides Shake Test Stand (ASC)

Function:

ASC side shake test stand is specially design for the NK and HF series force gauge to make up of different use test equipment doing the push pull force insertion force and destructive experiment.

During show the force value, also can install staff gauge to show displacement value at the same time, and lock the stroke, carry on compare test under the same displacement value in different work.


Sides Shake Test Stand (ASC)

• Big machine base, good stability, suit to use in indoor test.

• Trapezoidal screw rod rotation, hand wheel loads side, operated simply and stably.

• Matching the moveable base, can realize left and right, front and back movement, convenient to install exactly.

• Can install on the floor (tabletop) to use, causes operate more firmly.

• Matching digital staff gauge, collection stroke data at any moment.

1. Capacity: 500N

2. Stroke: 90mm

3. Dimension: 255x240x550mm

4. Weight: 12KG


Button Tester (ABQ-A)

Button tester purpose is to define clothing m anufacturer of responsibility to ensure butto ns, snaps and fixing parts can properly fixed in garment, prevent the danger of babies hav e the opportunity to swallow buttons. Theref ore, all garment button, snaps and fixed deco rative (can be put whole into small objects m easurement device) are to be detected by but tons tester.

This type is equiped with Analog force gauge.


Button Tester (ABQ-B)

Button tester purpose is to define clothing m anufacturer of responsibility to ensure butto ns, snaps and fixing parts can properly fixed in garment, prevent the danger of babies hav e the opportunity to swallow buttons. Theref ore, all garment button, snaps and fixed deco rative (can be put whole into small objects m easurement device) are to be detected by but tons tester.

This type is equiped with Digital force gauge.


Screw Test Stand (ASL)

Function:

ASL screw test stand can match the NK and HF series force gauge to make up of different use test equipment to do the push pull force insertion force and destructive experiment exactly. During show the force value, also can install staff gauge to show displacement value at the same time, and lock the stroke, carry on compare test under the same displacement value in different work.


Screw Test Stand (ASL)

Character:

Vertical, horizontal-type dual purpose, also can install on the floor (tabletop) to use, causes operate firmly.

Manual operation, simply and convenience

Matching digital staff gauge, collection stroke data at any moment.

Parameter:

Capacity: 500N

Stroke: 140mm


Weight: 14.5KG


Manual Horizontal Test Stand (AMH)

Function:

Matching the homemade and import

NK, NLB, ALB series etc. analog push pull force gauge and HF series digital push pull force gauge to do the push pull force and insertion force experiment.

Character:

Horizontal-type installment.

Manual operation, simply and steady.

Can install machine on the table (platform), cause the frame steadier.


Terminal pull force tester (ADL )

Terminal pull force tester is a testing equipme nt to wiring harness and electronic industry, s pecifically used to test all kinds of wire termin als pulling out force.

The instrument can combine NK, HF force gau ge and special fixture in testing. This instrume nt has characteristics of compact device, accurately controlling, high testing accuracy, convenient specimen clamping, simple operati on, etc. It is the ideal equipment for wiring har ness factory to ensure product quality.


Hydraulic Manual Test Stand (ALR)

Function:

ALR Hydraulic model test frame is designed for HF series push pull force gauge operation, manual operation. Using large hydraulic jacks to realize big load force test, Simple and stable operation, it can be combined with different fixtures in various combinations of different purposes compressive load test.


Hydraulic Manual Test Stand (ALR)

Max. load

Compress chamber

Stretching chamber

5k

150mm

185mm

5T

240mm

120mm

Effective stroke

90mm

Dimensions

190 × 14

0 × 880 mm

Net weight 30kg

125mm

225

× m

× 180

1000m

41.6kg

10T 20T

280mm 245mm

130mm 165mm

125mm 145mm

50T

290mm

150mm

160mm

300 × 300

× 1185m m

90.3kg

300 × 300

× 1220mm

98kg

350 × 350

× 1410m m

194kg


Peel-off Force Test Stand (ABL)

Parameters ：

1. Effective trip: 150mm

2. Max. Load: 500N

3. Dimensions: 350 × 210 × 450 mm

4. Net weight: 19kg

5. Test effective area: 105 × 100 mm, largest can reach 105 × 152mm


Keystroke Force Gauge Test Stand (AAJ)

Function:

Keystroke force gauge test stand is specially equipped for force gauge, which is used to the pressure load test of keys and buttons, featured by high precision, easy operation and quick reset, etc.. This machine is easy to use, can be placed on various working stand for use.

Specifications ：

·Length × width × height:

200 × 150 × 260mm

·Effective stroke:25mm


Peel-off Force Test Stand (ABL)

Function:

ABL Peel-off Force Test Stand is specially designed for NK, HF series Push pull equipment, can be combined into the test machine with different uses. Specially used in PC board on foil circuit adhesion force or

Tin foil, aluminum foil, tape etc. Hit the object surface firmness. In view of vertical dissect the test sample. To measure the actual strength.


Stem Strength Tester (YYD-1)

Function:

The stem intensity of sorghum,maize,and tobacco is a major factor to decidethe lodging-resistance ability. Since long-term,

The lodging of sorghum, maize, tobacco has caused great difficulties in crops mechanized harvesting . In current mechanization harvest level, a lot of crop is wasted. In addition, corn lodging, causing inadequate illumination.make its yield enormous limit. To cultivate high intensity stem of crop seed , This instrument applies to agricultural genetic breeding.


Spring Tester (ATH)

Function:

The ATH spring pull pressure test stand is specially design for measuring the stretches and compression distortion value of spring, and the load relations characteristic. It is applied in measuring the working load of spring when it on the certain length stretched and compressed.

CATALOG ►



Parameter:

• Test spring max unsupported length:

10N~30N is 100mm, 50N~500N is

150mm, 1000N~5000N is 200mm

• Max distortion value stroke: 10N~30N is

70mm, 50N~500N is 90mm,

1000N~5000N is 150mm

• Distortion value resolution eH: 0.01mm

• Distortion value display interface: Five figures and “-” position liquid crystal display;

• Max working load: According to measuring range;



• Load resolution eP: 0.02N

• Platen diameter: 49mm

• Shows value error: ± 1%

• Power source: Exchanges 220V-50Hz

• Power: 13W

• Operating temperature: 20 ± 10 ℃

• Storage and transport temperature: -

27 ℃ ~+70 ℃

• Relative humidity: 15%~80%RH.



Model

ATH-

10

ATH-

20

ATH-

30

ATH-

50

ATH-

100

ATH-

150

ATH-

200

Capacity 10N 20N

Resolution

Displacement staff gauge stroke

Displacement staff gauge resolution

0.001N

70mm

0.01m

m

Platen diameter 34mm

0.002N

70mm

00.01

mm

34mm

Spring max length

Accuracy

70mm 70mm

30N

0.003

N

70m m

0.01

mm

34m m

70m m

50N

100m m

49m m

150m m

100N

100m m

49m m

150m m

150N

0.01N

0.02N

150N

0.01

mm

0.01

mm

100m m

0.01

mm

49m m

150m m

200N

200N

100m m

0.01m

m

49mm

150m m

± 1%

ATH-

300

300N

300N

100m m

0.01m

m

ATH-

500

500N

500N

100m m

0.01m

m

ATH-

1000

1000N

1000N

150m m

ATH-

2000

2000

N

2000

N

150m m

0.01m

m

49mm 49mm

150m m

200m m

108m m

200m m

0.01m

m

108m m

200m m

ATH-

3000

3000

N

3000

N

150m m

ATH-

5000

5000N

5000N

150m m

0.01

mm

108m m

200m m

0.01m

m

108m m

200m m


Digital Torsional Spring Tester (ANH)

Function:

ANH series digital torsion spring tester is a kind of intelligent multi-functional measuring instrument used for testing and inspection of torsion spring.

With simple operation, high precision, easy to carry, complete functions, widely used in all kinds of electric, light industry, machinery manufacturing, research institutions, etc.


Digital Dynamic TorqueTester (AND)

Function:

ADN series digital dynamic torque tester is for testing various dynamic torque and the design and manufacture of a kind of intelligent measuring instrument. Used for testing various motor reducer output torque and power, speed, precision testing equipment. Widely applied in all kinds of motor, machinery manufacturing, research institutions, etc.

CATALOG ►


Digital Torque Meter (ANL)

Function:

The ANL digital torque meter is specially designed for measuring all kinds of torque.

It is suitable for all kinds of torque measurement and adjust components reverse destructive test and so on. This product Mainly used in measuring all kinds of electric and air torque, bottle opener, screwdriver, torque wrench, tighten torque instrument and product, widely applies in the electrical manufacture, the machine manufacture, the automobile light industry and the specialized scientific research and industry.



Character:

◇ High accuracy, high resolution, and stability. The sampling speed can be set.

◇ Fluctuate limiting value set, has the acousto-optic alarm device.

◇ Lattice type LCD, the back light can be set.

◇ Torque directions identify.

◇ Three kind of unit: N · m, kg · cm, lb · in automatic conversion.

◇ Many kinds of front values maintain.

◇ Power source shows and low power prompt.

◇ No-operation close automatically, can set the close time.

◇ Saves and prints 100 test data, can clean out at will.

◇ Uses the USB connect to the PC, examine real-time, survey curve, and carries on processing to the data: such as prints, statistics and so on.



MODEL

Capacity/Resolution

N.m

Kg.cm

lb.in

Accuracy

Peak value sampling frequency

Power supply

Charge time

Battery run time

Battery life-span

Size

Net weight

Charger

Packing

ANL-1

1.000/0.0005

10.20/0.005

8.85/0.005

ANL-2 ANL-5 ANL-10 ANL-20

2.000/0.001

5.000/0.002

10.00/0.005

20.00/0.01

20.40/0.01

51.00/0.02

102.0/0.05

204.0/0.1

17.70/0.01

88.5/0.05

177.0/0.1

44.25/0.02

± 0.5%

2000Hz

8.4V 1.2VX7 NiMH

2-4 hours about 20 hours about 20 hours

123mmX230mmX65mm

2kg input ： AC 220V 50Hz,output ： DC 12V 300mA aluminum alloy box


Bottle Lid Torque Meter (ANL-P)

Function:

ANL-P bottle lid torque tester is an intelligent and multifunction measure instrument. Specially designed for testing and examining all kinds of bottle lid to open and close torque. Applied in examining all kinds of bottle lid, light cap etc. open and close torque. Installed conveniently and fast, and the maximal diameter can reach

200mm, enclosed USB serial port output, can carry out transfer the data to the computer for analysis, printing and so on related process.



Character:

•High accuracy, high stability, high resolution.

•The sampling speed can be set.

•The upper limit value and lower limit value can be set, has acousto-optic alarm device.

•Lattice type liquid-crystal display, the backlight lamp can be set.

•Torque direction identifies.

•Three kinds of unit automatic conversion: N.m, Kg.cm, Lb.in.

•Multi-peak values maintain.

•Power source, electric quantity display and low electric quantity cue.

•Close automatically under no-operation, the close time can be set.

•Saves and prints 100 test data, delete at will.

•Uses USB connect PC, test real-time, measure curve, and carries on processing to the data: such as prints, statistic. and so on.



Model (no printer)

Capacity

Resolution

Sensor install mode

Accuracy

ANL-WP-1

1N.m

0.0001

Model (with printer) ANL-P-1

ANL-WP-2

2N.m

0.0001

ANL-P-2

ANL-WP-5

5N.m

0.0001

Sensor built-in

± 1%

ANL-P-5

ANL-WP-10

10N.m

0.0001

ANL-P-10

ANL-WP-

20

20N.m

0.0001

ANL-P-20

Capacity

Resolution

Sensor install mode

Accuracy

1N.m

0.0001

2N.m

0.0001

5N.m

0.0001

Sensor built-in

± 1%

10N.m

0.0001

20N.m

0.0001


Digital Torque Wrench Tester (ANJ)

Function:

Digital Torque Wrench Tester is an intelligent multi-functional measuring instrument which is designed for testing torque wrench. It main used in testing and calibrating various kinds of Concentration type torque wrench, digital type torque wrench, preset type torque wrench, torsion screwdriver, screwdriver and all kinds of products involving tighten force instrument.

Widely used in electrical manufacturing, mechanical manufacturing, automotive light industry and in scientific research and testing industry.


Digital Torque Wrench Tester (ANJ)

Model

Capacity

Resolution

Accuracy

ANJ- 50 ANJ- 100 ANJ- 200 ANJ- 300 ANJ- 500

50.000N.m

100.00N.m

200.00N.m

300.00N.m

500.00 N.m

0.001

0.01

0.01

0.01

0.01

± 1%

Model

Capacity

Resolution

Accuracy

ANJ- 1000 ANJ- 2000

1000.0N.m

2000.0N.m

0.1

0.1

ANJ- 3000

3000.0N.m

0.1

± 1%

ANJ- 5000

5000.0N.m

0.1


Torque Driver(ANQ)

Function:

Dial Torque Driver is use for cars, autobike, machine, electronic and so on.

It is use for the torque of parts, easy to han dle, easy to use, can keep long time.

It is a necessary tool to test the torque of maintain and check equipment set.


Torque Driver (ANQ)

Use method:

1. Before use, please zero to ensure the accuracy.

2. During use, this product must be keep vertical condition with the testing object; otherwise will reduce the accuracy and the service life of torque meter.

3. After use, please zero, facilitates the later use.

4. When zero, loosens the locknut on the torque, turns the dial, causes the indicator at zero position, and then tightens the locknut.

Model ANQ-0.6

Capacity （ Nm ）

0.1-0.6

Accuracy （ % ）

Length （ mm ）

ANQ-1.2

0.2-1.2

ANQ-3

0.25-3

5%

270

ANQ-6

0.5-6

ANQ-9

0.75-9

ANQ-12

1-12


Hardness Tester (LX-A)

Function:

LX-A hardness tester is widely applied in the low and medium hardness plastic, all kinds of rubber, multi-dimensional fat, leather, wax hardness test etc.

The product refers to ISO868 and the

ISO7619 international standard production, conforms to GB/T531, JB6148 and the

JJG304 standard.

CATALOG ►


Hardness Tester (LX-A)

Character:


Dual needle, after test the top value, the driven needle will stop move, convenience the user to read.

Handhold design, carry conveniently, handhold measure, also can be installed with match test stand.

Specification:

Dial value: 0 ～ 100HA

Needle stroke: 2.5 mm

Measure range: 10 ～ 90HA

Needlepoint size: Ф 0.79 mm

Weight: ～ 0.5 kg


Hardness Tester (LX-C)

Function:

LX-C hardness tester is used in measuring the hardness of oak model micro porous material which includes vesicant when the compression ratio is 50%, the stress above

0.5kg/cm2. It also can be used in other similar hardness materials.


Hardness Tester (LX-C)

Character:




Specification:

Dial value: 0 ～ 100HA


Measure range: 10 ～ 90HC

Needlepoint size: SR 2.5 mm

Weight: ～ 0.5 kg


Hardness Test Stand (LAC)

Function:

The LX-A&C hardness tester can fix on the

LAC test stand to improve the accuracy.


Hardness Tester (LX-D)

Function:

LX-D hardness tester is suitable for hardness test of high degree of hardness material, such as common hard rubber, hardened resin, acryl, Plexiglas, thermos plastic rubber, printing plate, fibred. The product conforms to HG/T2489 and other related standard request.


Hardness Tester (LX-D)

Character:




Specification:

Dial value: 0 ～ 100HD


Measure range: 10 ～ 90HD

Needlepoint size: SR 0.1 mm

Weight: ～ 0.5 kg


Hardness Test Stand (LD)

Function:

The LX-D hardness tester can fix on the

LD test stand to improve the accuracy.


Fruit Hardness Tester (AGY)

Function:

The AGY series fruit hardness tester divide into AGY-1, AGY-2, AGY-3 three kinds of types,

Applied in test hardness of fruit, such as apple, pear, the watermelon, the banana etc. to judge the fruit mature degree, in favor of improved variety cultivation, pick time, process time, storage, export, traffic etc grasp reasonably.

This instrument is small, light, read directly. It is convenient to carry, and especially suitable for all kinds of fruit site test fruit. It also can be used in matching test stand; can improve test accuracy, suitable for specialized examination department.


Fruit Hardness Tester

Principle:

Fruit hardness degree is refers to some fruit unit area (S) to withstand measured spring's pressure (N), their ratio defines as the fruit hardness degree (P).

P = N/SP- be measured fruit hardness degree value 105 Pa or (kg/cm2)

N- Spring presses on the fruit surface strength Newton or (kg)

S- Fruit compressive area square meter or

(cm2)


Fruit Hardness Tester (AGY)

Model

Scale

Nob size

Accuracy

Stroke

Dimension

Weight

AGY-1

2-

15kg/cm 2 ( × 10 5

Pa)

Φ3.5mm

±

0.1

AGY-2 AGY-3

4kg/cm 2

0.5-

(

×

10 5 Pa)

Φ3.5mm

±

0.02

0.5-

12kg/cm 2 ( × 10 5

Pa)

Φ8mm

±

0.1

1-

24kg/cm 2 ( × 10 5

Pa)

Φ11mm

10mm

140 × 60 × 30mm

0.3kg


Fruit Hardness Tester Stand (GY)

Introduction:

GY-J fruit hardness tester is designed for

GY - 1, GY - 2, GY-3 three types of fruits hardness tester, used for apples, bananas, pears, watermelon etc. Various fruits and hardness testing.

Features:

Simple operation stability, suitable for indoor table testing.

Using screw transmission technology,

Displacement measurement precision, smooth.


Digital Fruit Hardness Tester (GY-4)

Units:Kg/cm2 ( × 105 Pa)

Pressure head diameter:1# : Φ11.1mm, 2# :

Φ7.9mm Measuring range:

1# :0.2~15 Kg/cm2 ( × 105 Pa),

2# : 0.4~30 Kg/cm2 ( × 105 Pa)

Division value: 0.01 Kg/cm2

Indication error: ± 0.5%

Precision: ± 1%

Indenter indentation depth: 10mm

Power:charge power supply:220V/AC;

Batteries continuous working time: 6~8 hours

Net weight: About 450g

Dimensions: 230 × 66 × 36mm


Digital Fruit Hardness Test Stand (GYD)

Fuction:

GYD series Digital fruit hardness test stand is specially used for GY-4 digital hardness tester to make the testing much accurater.

Features:

Stroke:90mm

Size:25.5*24*50cm

N.W.:12kg

Max.load:500N


Soil Hardness Tester (TYD-1)

Function:

The TYD-1 type of soil hardness is to directly measure the soil hardness by the theoretical value Kg/Cm2 of the pressure gauge. It is very convenient and accurate for this soil hardmeter to investigate and study the soil permeability, aeration and soil properties of large machinery operations.

Specification:

Indicative scope of hardness:

• 0 ～ 40 mm ，

• 0 ～ 500 Kg/Cm2

Outline dimension:275mmX76mmX50mm.


Digital Soil Hardness Tester (TYD-2)

Maximum load:50Kg (Kg,Ng and ib Three units)

Resolution:0.01Kg.

Accuracy: ± 0.5%.

Measuring depth:0 ～ 450mm.

Power: charging power supply:220V/AC ；

Continuous operating time of battery:6 ～ 8 hours.

Stability: temperature drift :0.2uV/ ℃ （ 0-60 ℃ ）

Null drift:≤ 0.1%/8hour /FS.

Calibration range: full-scale calibration.

Ambient temperature:0 ～ +60 ℃ .

Ambient humidity:≤ 80%.

Allowable overload:150%.

Power supply mode:5nickel cyanogen battery

/220V AC charge 4 ～ 6 hours.


Sponge Durometer (LX-F)

Function:

LX-F type sponge durometer is suitable for the determination of soft foam, polyurethane foam rubber products’ hardness. And it will be different with the other hardness tester In the aspects of using. When using, the presser foot directly contact to the sample, and see its own weight as force measurement load.

Character:

Scope of pressure needle route: 0 ~ 2.5

millimeters.

The scale value: 0-100 degrees.

The force of pressure needle end:

550mN~4300mN （ 56~438.5g).


Grain Hardness Tester (AGW)

Function:

AGW Grain hardness tester is specially used in grain (wheat, rice, paddy rice and so on) degree of hardness test, this product adopt advanced measurement technology, has high accuracy, meter display intuitive, high resolution, easy to operate, durable and reliable. This product has the fancy outline, not only can handhold measure at the buy scene, but also revolves on the laboratory work table for tests.


Grain Hardness Tester (AGW)

Specification:

1. Range: 0 ～ 200N(0 ～ 20kg)

2. Accuracy: ± 5N （± 0.5kg

）

3. Resolution: 0.1N

（ 0.01kg

）

4. Test max diameter: 18mm

5. Dimension: 140mm × 100mm × 250mm

6. Weight: 3kg


Rope Tension Tester (ASZ)

Function:

ASZ Rope Tension Testing Instrument can be applied to various occasions, such as power industry, telecommunications industry, transportation industry, glass curtain wall decoration, ropeway industry, construction industry, pleasure grounds, tunnel construction, fishing, major research institutions and teaching institutions, testing institutions and other occasions involved with the tension of ropes and steel wire ropes.

CATALOG ►


Rope Tension Tester (ASZ) model specifications maximum load value

(KN)

Divided load value

(KN) output connector power operating temperature transport temperature

ASZ-20

20

0.01

ASZ-50

50

0.01

-10 ℃ ～

ASZ-100

60

100

0.1

℃

ASZ-200

200

0.1

Rs232 9-hole socket rechargeable battery charger (charging voltage 100V ～ 240V)

5 ℃ ～ 35 ℃ relative humidity operation net weight dimensions

15% ～ 80%RH

No vibration focus and corrosive media around

5kg

650 × 375 × 100mm


Digital pressuremeter tension tester(HD)

Introduction

HD digital pressuremeter tension tester is a ki ndof special equipment to measure wind tow ers, signal transmission and power transmiss ion systems rope tension.

It has characters of high precision, easy to op erate, easy to carry, etc. also it has many kind s of test modes, convenient to testing. Users can also input gravity acceleration value to m ake the test more accurately.


Tension Gauge(ATG, ATN)

Function:

The dial tension gauge is suitable for relay tip pressure, electronic switch, micro switch, valve, spring pull pressure, dial measure equipment principal axis pressure, dial system equipment tip and the gag bit mechanical pressure, tape recorder buffer mechanism pressure, and other precise pressures, pulling force test.

CATALOG ►


Gram Gauge(ATG, ATN)

Character:

Easy to operate

Exquisite outline

When test, use the needle move the object from static state to the position needed.

The tension gauge test not only along clockwise, but also along the anticlockwise. The needle must always plumb to the push-pull force direction.

Tension gauge set off single needle and dual needle. When the dual needle tension gauge gets the highest value, the needle hold still, convenient user to read.


Gram Gauge(ATG, ATN)

Parameter

MODEL ATN-0.05

ATN-0.1

Capacity 0.05N

Resolution 0.002N

Scale mode

0.01-

0.05-

0.01N

0.1N

0.005N

0.02-0.1-

0.02N

ATN-0.3

0.3N

0.01N

0.06-0.3-

0.06N

ATN-0.5

0.5N

0.02N

0.1-0.5-

0.1N

ATN-1

1N

0.05N

0.2-1-0.2N

ATN-1.5

1.5N

0.05N

0.3-1.5-

0.3N

ATN-3

3N

0.1N

0.6-3-

0.6N

ATN-5

5N

0.2N

1-5-1N

MODEL

Capacity

Resolution

Scale mode

ATG-5

5g

0.2g

1-5-1

ATG-10

10g

0.5g

2-10-2

ATG-30

30g

1g

6-30-6

ATG-50

50g

2g

10-50-10

ATG-100

100g

5g

20-100-20

ATG-150 ATG-300 ATG-500

150g

5g

30-150-30

300g

10g

60-300-

60

500g

20g

100-500-

100


Ball Pressure Tester (AQY)

Function:

This experiment device is designed according to the "ball pressure test " requirements in GB2099 standards, mainly used for heat testing in household and similar plug sockets products. It is the necessary equipment for relevant manufacturers and qc department for product quality inspection and control.

CATALOG ►


Soil water and temperature tester (TRS)

Soil water and temperature tester can be used i n field test and observe soil water positioning, t hus can get the soil moisture, hydraulic conduct ivity and other soil water properties parameters etc. This instrument use the principle of tension meter, the method of combining one or more pr obes,improve the traditional technology. You ca n also purchase a set of instrument,multiple pro bes. You can place the probes underground in d ifferent depth and different tested plots for long t erm. If you want to know the water of a point soi l, you can connect the instrumentwith probes, th en can read the value at once.


Soil Moisture Tester (TEN)

Function:

The Soil Moisture Tester supply you the simple and accurate testing system. To help you avoid crop water stress, so that you can accurately forecast irrigation water amount and irrigation time. Making the least water consumption to get the maximum crop. Establishing and using the best irrigation system can make the most effective use of water resource.


All clamps we made


Digital Force Gauge Test Stand

TRIPOD CATALOG

Before you move forward, you must forget the past!

All clamps we made

Related documents

Products

Support

Digital Force Gauge Test Stand

TRIPOD CATALOG

Before you move forward, you must forget the past!

All clamps we made

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib