WFC 10 CNC
The WFC 10 CNC is a new type of the machine, which is built on a sliding guiding

WFC 10 CNC
• is a continuously controlled cross-type machine of the up-todate design, ideal for the powerful complete machining of work pieces up to 5 tons
11 023 lb .

• V – RAM TRAVEL
• W – SPINDLE TRAVEL
• X – TABLE TRAVEL
• Y – SPINDLEBOX TRAVEL
• Z – COLUMN TRAVEL
WFC 10

• The frame of this machine is seated on a firm stand and linked with a bed in the axis X.
• Z = 1250 mm, 49.2 In
Z axis

• Workpiece motion is performed by a special cross-type machine execution, where the plate of the rotary table is moved along the axes
X and Z.
• 45° Support on linear ways
• X = 1250 mm, 49.2 In or
2000 mm, 78.74 In
X axis

• Fixed column
• Y = 1250 mm, 49.2 In or
1700 mm, 66.9 In
Column

Headstock
• The headstock is fabricated from a special ductile iron and is driven by an asynchronous servomotor with continuous regulation of revolution
• W = 730 mm 28.7 In
• 3000RPM (till 500 mm run out)
• 2000RPM (500-730 mm)
• 17kW 22 HP or
22 kW 29.5 HP

Headstock

• Max table load 3 or 5 tons
• Table dimesions
• 1000x1120 mm
39.3x44 In
• 1200x1400 mm
47.2x55.1 In
Table

CNC control system
• HEIDENHAIN iTNC 530 or TNC 620
• FANUC 31i or 32i
• 15´´ LCD display

Low Pressure Cooling (outside coolant)
• Coolant Pressure
(coolant tank output)
6 bar
• Max. Delivered Quantity
62 l/min
• Coolant Tank Capacity 550 l
High Pressure Cooling (through spindle)
• Coolant Pressure 20 / 30 / 50 bar
• Max. Delivered Quantity
25 / 37 / 60 l/min
• Coolant Tank Capacity 220 l
Coolant

Eletric box
• The electric equipment is consistent with CE,
CSA or UL certifications.
• Air conditioned distribution box

• 20 tools
• 32 tools
Automatic tool changer

• Orthogonal two-axes manual head
• Power 20kW
• Speed 2000/min
• 1:1 gear transfer
• SK 50 (DIN, MAS, ANSI)
• Manual tool clamping
OHM 20

• Right angle manual head
• Power 20kW
• Speed 2000/min
• 1:1 gear transfer
• SK 50 (DIN, MAS, ANSI)
• Manual tool clamping
PHM 20

• UHM 20
• Universal manual head
• Power 20kW
• Speed 2000/min
• 1:1 gear transfer
• SK 50 (DIN, MAS, ANSI)
• Manual tool clamping
UHM 20

• Belt type
Chip conveyor

Transport and installation
• Small version fits in One container
• Fast installation

Layout

Foundation plan

Thank you for your attention
Fermat www.fermatmachinery.com
+420 774 339 345 america@fermatmachinery.com
Průmyslová 11,
102 00 PRAGUE 10
Czech Republic
Lucas Precision www.lucasprecision.com
216 451 5588
Fermat.Sales@LucasPrecision.com
13020 St. Clair Avenue
Cleveland
OH 44108-2033