Unified-PCMC
Ver4
(KX-NCP500/1000/TDE600)
Installation
U-PCMC (V4.x) Installation - 1
“
Download the latest UPCMC from the PCC Website.
UPCMCv4.xxx
Double-Click the icon and install the tool to your PC.
NB: You will need ‘Administrator’ rights to successfully install the
U-PCMC.
U-PCMC (V4.x) Installation - 2
“
Select the ‘Repair’ option (Pre-selected) and click ‘Next’.
Click next to continue
U-PCMC (V4.x) Installation - 3
“
If you are upgrading the U-PCMC, then you will have the option to
backup your connection profile information,
NB: For a ‘new’ installation, this
option will not be presented.
Click next to continue
U-PCMC (V4.x) Installation - 4
Click next to continue
Then, accept the license
agreement and Click ‘Next’.
“
U-PCMC (V4.x) Installation - 5
“
We can see
PBX models.
Click next to continue
U-PCMC (V4.x) Installation - 6
“
User and Company
name can be entered.
Click next to continue
U-PCMC (V4.x) Installation - 7
“
Be sure to select the correct
country suffix code for your
region.
Then select the required
PCMC screen language.
Click next to continue
U-PCMC (V4.x) Installation - 8
“
Select the destination
folder for the installation.
Click next to continue
U-PCMC (V4.x) Installation - 9
“
A summary of the
provided details will be
displayed for confirmation.
If the details are correct,
the installation can begin
U-PCMC (V4.x) Installation - 10
“
After the installation has completed (it takes several
minutes), the option to copy the USB drivers is
presented.
If necessary, copy the files to the following
directory :C:\WINDOWS\system32\drivers
Start U-PCMC
U-PCMC (V4.x) Start - 1
“
Once installed, click the UPCMC Shortcut to launch
the application
Click “OK” to continue
Be sure to check the contents of the ‘Information’ page. It contains
details of required LPR s/w levels and conversion information.
U-PCMC (V4.x) Start - 2
Then enter the password for the desired
level (INSTALLER/USER etc)
Click “OK” to continue
“
U-PCMC (V4.x) Start - 3
“
The same options as earlier U-PCMC are presented.
U-PCMC (V4.x) Start - 4
New (Batch Mode)
New Model
- TDE600
- NCP500
- NCP100
“
U-PCMC (V4.x) Start - 5
“
TDE600 Slot Menu
“
U-PCMC (V4.x) Start - 6
NCP500 Slot Menu
“
U-PCMC (V4.x) Start - 7
NCP1000 Slot Menu
U-PCMC (V4.x) Start - 8
Slot view is changed to represent
NCP Model (NCP1000).
“
U-PCMC (V4.x) Start - 9
The same operation as earlier U-PCMC are presented.
“
U-PCMC (V4.x) Start - 10
PBX Replacement.
Sorry – PBX Replacement
for NCP500/1000 is not
possible.
“
Improvements/New Menus
- Auto-Programming for Call-Pickup
- IP-PT registration procedure
- Portable Station registration procedure
- Activate License
- ‘Search’ Function to Extension List View.
- Built-in Communication Assistant
- Activation Key Detail Information
- FAX Transfer function
“
Auto-Programming for Call-Pickup -1
1
Customer Request Operation
Ext.1001
ISDN
2
Ext.1002
1- Ext.1001 has a call (Internal/eternal)
2- Ext.1002 pricks up the call by *40 + xx.
But, customer wish to have……
1- Ext.1001 has a call (Internal/eternal)
2- Ext.1002 pricks up the call by *0.
U-PCMC ver.4
automatic program .
Alternative Plan
1- Quick Dial *0 → ***00
2- Ext.1002 personal speed dial 00 → *40 + xx.
Auto-Programming for Call-Pickup -2
“
“Call-Pickup tool” is added.
After assigning extensions to their correct
groups, this tool can be used to make
easy call pickup for each user.
Available PBX
-TDE600
-NCP500
-NCP1000
Click “YES” to continue
Auto-Programming for Call-Pickup -3
“
Finally………
Quick Dial *0 → ***00
Automatically programmed
Ext.1001
Pick-up group-01
personal speed dial 00
→ *4001.
Ext.1002
Pick-up group-01
personal speed dial 00
→ *4001.
Ext.1003
Pick-up group-02
personal speed dial 00
→ *4002.
“
IP-PT registration procedure -1
Current
Need to click Next/Continue
for each IP-PT registration
-Open Registration -Click Next
Screen
-Select IP
Extension numbers
-Click Next
Screen shows
Registration
Succeed! Click Continue
-Connect IP-PT to LAN and wait
for automatic registration
(about 15 seconds)
-Click Next
Screen shows
Registration
Succeed! Click Continue
-Connect IP-PT to LAN and
wait for automatic registration
(about 15 seconds)
“
IP-PT registration procedure -2
Improved
New Icon
-Open Registration -Click
Screen
Automatic
-Select IP
response
Extension numbers
-Click Next
No operation required for
each IP-PT registration
Screen shows Screen shows
Ready for next
Registration
Succeed! for 5 registration
seconds
Screen shows
Registration
Succeed! for 5
seconds
Available PBX
-TDE600
-NCP500
-NCP1000
-Connect IP-PT to LAN and wait
for automatic registration
(about 15 seconds)
-Connect IP-PT to LAN and
wait for automatic registration
(about 15 seconds)
Portable Station (PS) registration procedure “
Improved
New Icon
-Open Registration -Click
Screen
Automatic
-Select PS
response
Extension numbers
-Click Next
No operation required for
each PS registration
Screen shows Screen shows
Ready for next
Registration
Succeed! for 5 registration
seconds
Screen shows
Registration
Succeed! for 5
seconds
Available PBX
-TDE600
-NCP500
-NCP1000
-Connect PS to System and wait -Connect PS to System and wait
for automatic registration.
for automatic registration.
Activate License
Available PBX
-NCP500
-NCP1000
Automatic OUS/INS can be made after adding
additional licenses. (Activate License)
“
CA License status
can be viewed via
the Activation Key
Page.
‘Search’ Function to Extension List View.
“
Available PBX
-TDE600
-NCP500
-NCP1000
It is easy to find Shelf,
Slot, Prot.
It is possible to search
by Ext number or Type
or name.
‘Sort’ Function to Extension List View.
“
Available PBX
-TDE600
-NCP500
-NCP1000
We can sort by Extension number, Type, Extension
name, Shelf, Slot, and port.
E.G Sort by Extension number.
Built-in Communication Assistant
“
4.1 - Option 9 (Extension Settings) – Built-in Communication Assistant
Available PBX
-NCP500
-NCP1000
It is possible to specify the type of CA License each extension can
use. (Enable = Pro/Supervisor)
NB: This tab also appears in the PS Settings Options, but is not
supported till v2.x
“
Activation Key Detail Information -1
Customer Request want to see activation key details.
- Key Type ?
- Temporally ?
- Unlimited ?
Activation Key Detail Information -2
“
Available PBX
-NCP500
-NCP1000
2- Click “Detail”
1- Highlight Activation
key
Activation key No.
Activation key type
No. of Activation Key
Expiration Day
“
FAX Transfer function
5.3.2 - DISA Message – FAX Transfer function is added
Available PBX
-NCP500
-NCP1000
This function is same as TDA15/30 FAX Transfer Function
RBT to outside caller via V-SIP
“
Available PBX
-NCP500
-NCP1000
“RBT to outside caller” added to SHELF Property.
Modifications/Changes
“
Modifications/Changes -1
2.9 System Settings – Option 6(CTI)
1st Party CDR Interval
Timer is not shown.
(The System refers to 3rd
Party CTI.)
Available PBX
-TDE600
-NCP500
-NCP1000
SLT Ring Default setting is changed from
‘Disable’ to ‘Enable’ (Based on
TDE100/200)
Modifications/Changes -2
V-IP Gateway DTMF Default setting
“
Available PBX
-All TDE
-NCP500
-NCP1000
Incoming Caller DTMF
Default setting is “Outband
(H.245)” – TDE Default
setting is “Inband”
Thank You Very Much
For Your Attention
“ We are Panasonic Family”