
Our product range is highly acclaimed for it’s
Technological Superiority, Sturdy, High Productivity,
Cost effectiveness and Easy maintenance. This has
come equally to foreign products. The product range
of BLOWROOM machineries are Openers, Cleaners,
Dust and Waste removal equipments. We proudly
inform that our products given as follows are running
successfully, producing best results in our customers
end Practically
Aeromech Textile Engineers














Range of Products
Openers and Cleaners
1.Pre-Mixing Openers
2.Bale Openers
3.Bale Pluckers
4.Two /Three/Four Roll Openers
5.Gradient Cleaners
6.Middle Feeders
7.Condensors
8.Multi-Blenders 4/6/8/10 Chambers
9.Micro Dust Removers
10.Fibre Compactors
11. Primary and Secondary Filters
12.Panel Filters
13. Disc Pre-Filters
14. Contamination Feed Conveyor Tables
15. Two Way Pneumatic Distributors
16. Pneumatic Dambers
17. Air Ventilators
18. Pneumatic Feeding Units
19. Single Beater Lap Machine
20. Gravity Traps
21. Double Magnet Traps
22. Chute Feeding Units
23. Clearer Roller Cleaner
Pre-Mixing Opener
Aeromech Pre-Mixing Opener portable type comprising 3 different type of beaters
with large waste chamber, adjustable Grid section gently opens cotton and or man
made fibers. User friendly, maintenance free, working width 1000mm with an
output up to 1250kgs/hr. Trolley wheels to move every where and unrestricted
3/5/10 mtr feed conveyor for maximum pre-mixing of bale material, easily for
contamination with low power geared motor.
Bale Opener
Aeromech Bale
Opener working width
1200mm is the latest
in the series and is
most flexible for
every type of raw
material and
application. Large
mixing chamber
ensures thorough
mixing of individual
tufts. Evener roller
incorporating lifting
lattice performs tufts
opening and
blending. Feed
conveyor virtually
unrestricted 5/10mtr
for maximum premixing of bale
material, easily for
contamination.
Two Roller Clener
This machine is used for
treatment of various grades of
cotton and further cleans
preliminarily opened materials.
This machine adopts Twin roll
with free beating. Material is fedaxial in the machine and
delivered from other end. The
grid bars under the rollers do the
opening and cleaning. This will
prevent the big dust being
smashed into small tuft and
ensure an earlier dedusting.
Micro Dust Remover
De-dusting is an important process
in a Textile Mill. A good de-dusting
leads to considerable reduction in
the micro dust accumulation in the
Rotor spinning as well as Ring
Spinning resulting in lower thread
breaks and also avoid moire effect.
This machine is used as the last
beating and cleaning point in the
Blow room line. The unique dedusting machine from Aeromech
offers an excellent result that
removal of Dust and Micro dust
efficiency with low power compare
with other brands..
Aero Synthetic Opener
For Synthetic processing, the
Blow room plays an
important role for quality
aspects. An opener is
necessary for opening the
synthetic material without
damage the fibers. Aeromech
has been manufacturing
ASO-1 which is well suit for
Synthetic processing units.
Construction and Design is
similarly to Fine opener,
except the Beater pins and
Grid section. An under casing
and Mote knife provided
under the beater. The beater
specially designed for
Synthetic material.
Gravity Trap
Aeromech Gravity Trap uses centrifugal
action to remove almost all impurities
which heavier than tufts regardless of it’s
material composition. Gravity Trap can
be fitted into any duct with a constant aircurrent. No moving parts, Individually
adjustable Mote-knives and Steel
Segments at a foot of ‘U’ turn deflect the
heavier particles down into a large
collection chamber. This machine is
maintenance free and does not need
electrical power
Aero MULTI-BLENDER
Aero Multi-Blender offers
an optimum solution for
any mixing task for staple
fiber mixes. A fan feeds
the material into the
trunks, which are
successively filled and
simultaneously emptied.
The principal guarantees
a maximum homogeneity
of the mixing. The
transport air entering the
machine also feeds the
material to the following
machine. The process of
filling, mixing and feeding
are controlled by
pneumatic system
Aero Bale Plucker
Aeromech Bale Plucker is for
the initial stage for opening
raw material in Blowroom,
used for plucking bales of
various cotton grades and or
man made fibers. Cotton bales
are placed in the round circle,
the carriage rotates above the
bales with a high revoluting
beater and grids in the
carriage, the carriage plucks
the bales. For every circle of
the carriage will lower it’s
position according to pre- set
the distance. Such keep the
plucking continuously and up
to the lowest position. The
plucked tufts will sucked by
the fan in the next machine.
Aero Gradient Cleaner [GC6]
The Gradient Cleaner GC6 is a very
effective machine for all types of cotton.
Six beaters arranged in rising steps at
an angle of 45* carry the tufts upwards
whilst removing a large proportion of
the heavy impurities through he grids.
Fixed cross plates restrict the passage
between the beater rolls. The robust
beater blades have ‘U ‘shape despite a
severe beating action, they don’t
damage he fibers. Large window and
internal illumination of the spacious
waste chamber enable the removal of
waste to be observed. Material must not
be removed from the gradient Cleaner
by immediate suction s this would
impade waste removal. The machine
must eject the tufts into an air stream
drawn from the room except when it is
delivering into a feed trunk of the next
machine
Aero Magnet Trap [MRO]
Magnet Trap in the ducts or
machines capture Iron particles
which are entangled in the tufts.
The Double magnet trap is fitted
in the material transport duct,
where possible at the start of the
line before machines with
vulnerable working elements.
Two sets of each containing 3
high power 150*100*25 magnets
are fitted in an Zic-Zac section of
the duct
Aero Dust Extract [Airex]
A simple means of
extracting excess
transport air and
any air bourne
dust. Dust extract
is typically
installed in duct
line after the
openers. Air and
Dust from material
transport system
passes along a
perforated section
of during in dust
extracted through
perforations to
central filter.
Adjustable Damber
controls amount of
air exraction.
Single Beater Lap machine [Scutcher]
Single beater lap machine [scutcher] working
width 1015mm sensitive almost maintenance
free, feed control by sensing lever and cone
drive with differential gear. Krischner beater for
fine opening and cleaning, Adjustable air
supply influencing covering of the dust cage
with tufts, Large dust cage diametrically
exhausted across it’s whole width to form a
compact lap of layer with high length and cross
regularity, Heavy calander rollars
pneumatically loaded for formation of heavy
laps, Calander rollars ‘One laying on Two’ for
horizontal running of laps to avoid false drafts,
Automation for lap delivery, lap removal from
lap spindle between reserve and working
position and without interrupting production,
complete automation readjust able. The
pneuma feeder provides a uniform feed to the
scutcher. An adjustable sensitive pressure
switch located in feed trunk maintains the
material level variations within tight limits.
Filters and Compactors
This Series combining of First stage , Second Stage, Fiber
Compactors are used for the projects of Dust removal from process
of Blow room, Carding, Combing and serves as air circulating filter
in the Pre-spinning, Post spinning. It is also adopted in the dusting
powder polluted circumstances which mainly contain fibers.Dust
contained after treatment less than 1mg/m3.Efficiency 98%
Clearer Roller Cleaner
Aeromech Clearer Roller Cleaner
cleans thoroughly the fluff from the
roller and collects in the chamber
provided by a unique suction
device. The fluff collected can be
removed easily from the chamber.
The clearer roller comes out on the
other side completely cleaned
automatically. The guide is
adjustable to fit on different
diameter of rollers of types of
spinning machines. Save 95% of the
cleaning time and labor. Low power
consumption with high efficiency.
Adjustable to all sizes of rollers.
Transportability easy within the
mill. A superior device to clean the
Clearer rollers automatically.
Aeromech Textile Engineers











For any Technical assistance:
Mohanraaj.N- Proprietor
Chinnagurusamy Lay-out
Singanallur post
Coimbatore-641 005
Tamilnadu-India
Ph: 91 422 391 7818
Mob:91 99409 26151/ 91 81446 86006
E.mail: aeromech_cmo@yahoo.in / aeromechcmo1@aol.com /
aeromech.cmo1@gmail.com
Web: http://aeromech.webs.com/ http:// aeromech.yolasite.com