The
LOGIQ 200
PRO Series
LOGIQ 200 PRO Series
Professional
Image
Quality
Investment
Progress
Protection
Productivity
The PRO Series
represents outstanding value for the most discerning professional,
delivering increased productivity and superior diagnostic outcomes
for you and your patients.
SCAN Board
CON 1
RELAY
-SHV
CON 2
+SHV
USC BUS
SCANNER
TBF
TX DRV
+THV
P GUN ASSY
PGC
PRE AMP
\
CROSS
POINT
-THV
WATCH DOG
INTERFACE
USC BUS
NOVA BUS
RBF
PGC
ACC GEN
TO MVP
TGC
AAF
ADC
IIC
DDS
USC BUS
NOVA BUS
COSMO
Digital Beamformer
MR Technology
(Wide Aperture Technology)
WOW!!
40MHz Ultra-High frequency
Sampling Rate
011010011010
Flicker-free Monitor!!
011010011010
Target
Σ
011010011010
011010011010
011010011010
011010011010
Probe
Digital Time Delay
Digital Adder
Catch Axial, Lateral, and Temporal
Resolution….
Digital Beamformer
Flicker-free
Monitor
ATO
3CB(2-5MHz Probe)
Axial Resolution
Auto Wave Shaping
Lateral Resolution
Best B-Mode IQ!
Contrast Resolution
Temporal Resolution
Wide Aperture
Technology
40MHz
Converter
High Precision Digital Beamformer
ATO
Acoustic Data
LOGIQ200MD PRO
Image Processor
Image
ATO gives you the best
contrast resolution
using One-Touch on keyboard
Image
Analysis
Optimization based on Digital Adaptive Processing
ATO
Conventional Manual
Image Optimization
2-5 Minutes
ROI
In seconds
ATO
Less Operator Dependent… Faster... Better Image Quality
NOVA BUS
IMAGE
STORAGE
RAM
MVP Board
IMAGE
SOFTENER
B/M FRONT
END CONTROL
FRAME
AVERAGE
ALM
PEAK
HOLD
ITP
XY
MEMORY
CRDTF
ZOOMER
XY ADDR
GEN
NON-INT
CONVERT
CINE
CONTROL
CINE
MEMORY
USC BUS
USC BUS
I/F
DSP
VIDEO
LUT
INTER
LACE
CONVERT
Video
DAC
VID
DAC
VIDEO
DECODER
SYNC
GENERATOR
SAP
FIFO
IMAGE
DISPLAY
CONTROL
XY
MEMORY
PROGRAM
MEMORY
MSTE
RESET
CPU
ROM
RTC
RAM
SUPER
I/O
VRAM
AGDC
IDE
CTL
FROM NOVA BUS
HV
+/-100V
+/- 65 V
LV Voltages From System
Password : Antony
COMPARISION OF LOGIC 200 WITH 200 PRO
Logic 200 Alpha
Logic 200 Pro
MST
MST
DSC
MVP
ESP
RBF
RTC
TBF
CONN
SCAN
HV unit
BPHV UNIT
MONITOR
Non Interlace
Monitor
Follow these steps to enter the Service Menu.
Note
Probes should be installed in the port and Blue Shift key should be off before take these steps.
1. Pressing Shift + Ctrl keys and then press the Shift +s keys, and then Shift + 1 keys.
2. Input the PASSWORD and press Return key.
The Service Top Menu will appear on the monitor as shown in ILLUSTRATION 2--5.
Service Utility MENU : Top Menu 99/03/12 09:16:37
Current Software Version is 3.0
*System Diagnosis
Board/Program Version
System Reset
Key Operation History
Option Set
Initialize :1 (1:America 2:Europe 3:Asia 4:Japan)
System Clock Adjust
Exit
TEST Conditions
Follow these steps to exit the Service Menu.
1. Press Shift + R keys. If this step will be performed again, the Service Menu will be entered
again.
OR
2. Select Exit on the Top Menu, and press Set or Return keys.
The Service Menu will be exited.
Follow these steps to operate the Service Menu.
1. Using Arrow Up/down keys, select one of seven items.
2. Press Set or Return keys.
The Service Sub Menu will be appeared or Service Menu will be operated.
Note
Resetting the system using the System Reset, to reboot System, does not affect on the system
presets.
Follow these steps to enter the System Diagnosis menu.
1. Using the Arrow up/down keys, select the “System Diagnosis”menu in the Top Menu. Refer to the ILLUSTRATION 2--5. The left
side of selected menu, here will be appeared the cursor (*).
2. Press Set or Return keys.
The System Diagnosis menu will appear on the monitor as shown in the ILLUSTRATION 2--6.
Service Utility MENU : System Diagnosis 99/03/12 09:16:37
Current Software Version is 3.0
NAME Time Status
*System test 21 M
Scan Test 0 M
TBF Test 0 M
Linear/Convex Path 0 M
Sector Probe Path 0 M
BPHV test 1 M
MVP Hardware Test 1 M
B mode Function 1 M
B mode Cine 8 M
M mode Function 2 M
MSTE test 4 M
Keyboard 0 M
PIOP 1 M
Monitor 0 M
Power Supply 1 M
Exit
Press ’ctrl’+’X’to
Failure Codes
Wide Range of Probes
CBF Convex Probe
- Frequency:3.5Mhz
- Bandwidth: 2.5 - 5.0 Mhz
-FOV:72deg
-Convex ROC:50mmR
-Biopsy guide: Available
LE Linear Probe
-Frequency:5.0Mhz
-Bandwidth: 3.7 -7.4 Mhz
-FOV:83mm
CAE Convex Probe
LB Linear Probe
-Frequency:5Mhz
-Bandwidth: 3.7- 7.4 Mhz
-FOV:72deg
-Convex ROC:72mmR
-Biopsy guide: Available
-Frequency:3.5Mhz
-Bandwidth: 2.5 - 5.0 Mhz
-FOV:94mm
LD Linear Probe
MTZ Micro-Convex Probe
-Frequency:3.5Mhz
-Banswidth: 2.5 -5.0 Mhz
-FOV:94mm
-Frequency:6.5Mhz
-Bandwidth: 4.3 -8.6 Mhz
-FOV:124deg
-Convex ROC:10mmR
-Biopsy guide:Available
Wide Range of Probes
LH Linear Probe
-Frequency:7.7Mhz
-FOV:63mm
-Biopsy guide:Available
CZB Micro-Convex Probe
-Frequency:6.5Mhz
-Bandwidth: 4.3 -8.6 Mhz
-FOV:124deg
-Convex ROC:10mmR
LI Linear Probe
-Frequency:7.5Mhz
-Bandwidth: 5.2 -9.5 Mhz
-FOV: 35mm
LT Linear Probe
-Frequency:7.5Mhz
-Bandwidth: 5.2 -9.5 Mhz
-FOV:35mm
Wide Range of Probes
ERB Micro convex/Linear
Array probe
-Frequency : 7.0Mh
-Bandwidth : 5.2-11.3Mhz
-FOV : 12 deg
3Cb Convex Array Probe
-Frequency : 3.5Mhz
-Bandwidth : 2.5-5.0Mhz
-FOV : 59 deg
10L Linear probe
-Frequency : 9.0Mhz
-Bandwidth : 5.2-11.3Mhz
-FOV : 40mm
S317 Phased Array Sector probe
-Frequency : 3.5Mhz
-Bandwidth : 2.5-5.0Mhz
-FOV : 90 deg
CS Microconvex Array probe
-Frequency : 3.5Mhz
-Bandwidth : 2.7-4.2Mhz
-FOV : 81 deg
e
“We Bring Good Things To Life”