KX-TDE/NCP Version 7
Product Information
Rev CC January 28, 2013
Official software release of mass production version : 2013 June
Mass production change : 2013 August
Panasonic System Networks
PBX SE team
Specifications and schedule are subject to change without notice.
Feature List
No.
Feature
1
New IP-PT KX-NT5xx is supported.
2
Outgoing call log and incoming call log for extension call
3
Tenant based extension directory
4
Transfer to trunk after call is answered by cellular phone.
2
Revision
Edition
No.
AA
-
BB
CC
Revision
Date
1st draft for PSN group internal study
Dec 06, 2012
4-5
Example was added.
Dec 15, 2012
4-2
This feature is available for not only “Keep Ring” Fwd
but also other Fed.
Jan 24, 2013
3
KX-NT5xx IP PT
4
1-1. KX-NT5xx - Specifications
TDE/NCP
Version 7
New IP-PT KX-NT5xx is supported.
- KX-NT5xx hardware is based on KX-UT which supports improved
hands-free functionality compare to KX-NT3xx.
- But software is based on KX-NT3xx to support full PBX features.
KX-NT543
3-line LCD
KX-NT546
6-line LCD
KX-NT560
- BT headset feature is not available for KX-NT543 and NT546.
- BT headset feature available for KX-NT560 without option.
- EHS (Electronics Hook Switch) is available for all KX-NT5xx.
5
TDE/NCP
Version 7
1-2. KX-NT5xx - Conditions
Difference from KX-NT3xx
- KX-TDA0470 IPEXT16 card does not support KX-NT5xx.
Therefore one KX-TDE or KX-NCP can support maximum
128 KX-NT5xx by LAN port on MPR card.
KX-NS1000 is recommended for more than 128 KX-NT phones.
- Encryption is not supported.
Model
Supported by
MPR
- Add-on key module is not available for KX-NT5xx. KX-NT321
KX-NT343
and
- Handset cord is longer.
KX-NT346
IPEXT16
Add-on 12-key
KX-NT5xx
KX-NT3xx
KX-UT
KX-DT
580mm
370mm
For example, hotel front staff can
go to printer during talking.
KX-NT366
MPR
KX-NT5xx
MPR
Add-on 60-key
KX-NT346 with
KX-NT346 with
KX-NT303
KX-NT305
6
TDE/NCP
Version 7
1-3. KX-NT5xx - Conditions
Difference from KX-UT
- SBC cannot be used because not SIP based.
- DTMF Tone cannot be sent to other IP extension during P2P talking.
- Quantity of key is increased to support full PBX features.
< KX-NT543 / KX-NT546 >
⑨ Message
⑩ Pause
⑪ Flash
⑫ Redial
⑰ Fwd/DND
⑱ Hold
⑲ Cancel
⑳ Intercom
⑬ Auto Ans
⑭ Conf
⑮ Transfer
⑯ Auto Dial
⑳ SP-Phone
7
Call Log for Extension Call
8
TDE/NCP
Version 7
2-1. Call Log for Extension Call
Outgoing call log and redial are available for extension call also by
programming.
Public Telephone Network
HQ
7-81
Branch
7-80
IP Network
09-8765-4321
050-1234-5678
101
101
102
105
<Dial using Log>
0/9-0987654321
0/9-05012345678
7-80-101
105
102
102 can be saved newly using TDE-NCP version 7.
Other dials are saved using TDE-NCP any version.
“Store” does not work
for extension call.
9
TDE/NCP
Version 7
2-2. Call Log for Extension Call
Incoming call log is available for extension call also by programming.
Public Telephone Network
HQ
7-81
Branch
7-80
IP Network
050-1234-5678
09-8765-4321
101
101
102
<Call back using Log>
0/9-0987654321
0/9-05012345678
7-80-101
102
102 and 80101 can be saved newly using TDE-NCP version 7.
Other dials are saved using TDE-NCP any version.
10
2-3. Call Log for Extension Call
TDE/NCP
Version 7
Programming
- This feature is enabled for incoming call and outgoing call
separately using system optional programming.
- Default is “Enable”.
- Specification of “Disable”
is same as TDE-NCP
version 6 or before.
11
2-4. Call Log for Extension Call
TDE/NCP
Version 7
Condition
- When outgoing call log is available for extension call, old same phone
number is deleted from outgoing call automatically.
This is applied to both extension call and trunk call.
TDE-NCP version 7
Outgoing Call Log :
Enable for Extension Call
TDE-NCP version 7
Outgoing Call Log :
Disable for Extension Call
or
TDE-NCP version 6 or before
=> Same number is logged.
If call 105, old 105 is deleted.
Other dials are kept.
This improvement is not applied to incoming
call log because “How often” is important.
12
Tenant based
Extension Directory
13
3-1. Tenant Extension Directory
TDE/NCP
Version 7
Extension directory can be limited for same tenant user only
by programming.
101
Ann
Tenant 1 : ABC Trading
102
103
104
Bill
Catherine Diana
Extension Directory does NOT
display Andrew and Charles,
when limitation is activated.
105
Elizabeth
Tenant 2 : Royal Travel
111
112
Andrew
Charles
Extension Directory displays
Andrew and Charles also,
when limitation is NOT activated.
14
3-2. Tenant Extension Directory
TDE/NCP
Version 7
Programming
- This feature is enabled using tenant programming.
All Tenant : Can see directory of all extension
(Default : Same as TDE/NCP version 6)
Each Tenant : Can see directory of extension in same tenant only
15
3-3. Tenant Extension Directory
TDA/TDE
NCP/NS
Any version
Conditions
- DSS key is not limited for other tenant.
- However flexible key programming can be limited to “one touch dial
only” using extension programming.
PT programming also can be restricted using COS programming.
Above programming is available for KX-TDA/TDE/NCP/NS any version.
16
3-4. Tenant Extension Directory
TDA/TDE
NCP/NS
Any version
Conditions - Cont
- Extension call and call pick-up can be restricted for other tenant
using COS programming.
This restriction is applied to any operation regardless DSS key.
101
Ann
COS-1
102
Bill
COS-2
103
Catherine
COS-1
104
Diana
COS-2
105
Elizabeth
111
Andrew
112
Charles
COS-3
COS-4
COS-5
COS-1/2/3 cannot call COS-4/5.
COS-4/5 cannot call COS-1/2/3.
COS-4/5 can call COS-4/5.
<More Information>
COS-1/2 can call COS1/2.
COS-1 cannot call COS-3.
COS-2 can call COS-3.
COS-3 can call COS-1/2/3.
COS-1 : Employee
COS-2 : Manager
COS-3 : President
Employee cannot call president.
But president can call employee.
Above programming is available for KX-TDA/TDE/NCP/NS any version.
17
Transfer to Trunk
from Cellular
18
TDE/NCP
Version 7
4-1. Cellular as Extension
Cellular phone users can transfer a call to extension in other PBX
and outside telephone number, as well as extension in same PBX, after
they received incoming call.
Public Telephone or Cellular Network
Office
09-8765-4321
Customer
050-1234-5678
101
102
080-8888-4444
Cellular
105
In Russia, TDE to TDE connection
using QSIG is very popular as solution
for more than 1000 extensions.
TDE V6 or before was strange for user.
- Transfer to 102 : OK
- Transfer to 105 : Not OK
Dial # 102 or # 105 or # 0/9-050-1234-5678
to transfer. # works as “Flash” of SLT.
105 and 050-1234-5678 can be destination of transferred newly
using TDE-NCP version 7.
Extension number such as 102 is destination of transfer using TDENCP any version.
19
4-2. Cellular as Extension
TDE/NCP
Version 7
Programming - Summary
- Cellular phone has to be Fwd destination of extension.
This feature is available for “keep ringing” mode also.
Or cellular phone has to be member of ICD group using virtual PS.
- DISA connection has to be enabled to detect
Fwd
DTMF # and transfer destination.
- ESVM card or MSG card on OPB3 card
101
080-8888-4444
- 2-ch SVM circuit on MPR card
Keep Ringing
Cellular
even after Fwd
- Activation key is required to detect DTMF #.
KX-NCS3910 for KX-NCP
KX-NCS4910 for KX-TDE100-200
KX-NCS4950 for KX-TDE600
- 0/9 + Caller ID of cellular phone has to be assigned as extension using
system speed dial programming.
COS of the extension is applied to transfer call trunk for transferring.
(Same programming as Automatic walking COS through DISA)
- If caller ID of cellular phone is not assigned, COS of Trunk Group
(trunk to call cellular phone) is applied.
20
TDE/NCP
Version 7
4-3. Cellular as Extension
Programming - 1
- Cellular phone has to be Fwd destination of extension.
This feature is available for “keep ringing” mode also using
Fwd No answer feature with keep ringing mode.
Fwd
101
080-8888-4444
Keep Ringing
Cellular
even after Fwd
21
4-4. Cellular as Extension
TDE/NCP
Version 7
Programming - 2
- DISA connection has to be enabled to detect DTMF # and
transfer destination.
22
TDE/NCP
Version 7
4-5. Cellular as Extension
Programming - 3
- 0/9 + Caller ID of cellular phone has to be assigned as extension using
system speed dial programming.
COS of the extension is applied to transfer call trunk for transferring.
(Same programming as Automatic walking COS through DISA)
080-8888-4444
Cellular
101
If extension cannot call international,
paired cellular phone cannot transfer a
call to international.
23
TDE/NCP
Version 7
4-6. Cellular as Extension
Programming - 4
- If caller ID of cellular phone is not assigned, COS of Trunk Group
(trunk to call cellular phone) is applied.
COS of TRG 1 is applied for following example.
Public Telephone or Cellular Network
TRG1
Office
TRG2
TRG3
050-1234-5678
09-8765-4321
Customer
101
080-8888-4444
Cellular
Dial # 0/9-050-1234-5678
to transfer.
COS is applied for this call.
Default is 7.
Cannot call public trunk by TRS.
24
Thank you !
The END
25